* [PATCH demo] ata_scsi_queuecmd: Make input parameters check more clearly
@ 2022-01-05 2:17 Wenchao Hao
2022-01-05 5:59 ` Damien Le Moal
2022-01-05 6:04 ` Damien Le Moal
0 siblings, 2 replies; 3+ messages in thread
From: Wenchao Hao @ 2022-01-05 2:17 UTC (permalink / raw)
To: Damien Le Moal, linux-ide, linux-kernel; +Cc: Zhiqiang Liu, Wenchao Hao
This is just a clean code. Since each branch of "if" state would check
scmd->cmd_len, so move the check of scmd->cmd_len out of "if" state to
simplify the logic of input parameters check.
The patch do not change origin function logic.
Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
---
drivers/ata/libata-scsi.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 313e9475507b..1c653b5327db 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -4020,19 +4020,18 @@ void ata_scsi_dump_cdb(struct ata_port *ap, struct scsi_cmnd *cmd)
int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev)
{
u8 scsi_op = scmd->cmnd[0];
- ata_xlat_func_t xlat_func;
+ ata_xlat_func_t xlat_func = NULL;
int rc = 0;
+ if (unlikely(!scmd->cmd_len))
+ goto bad_cdb_len;
+
if (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ZAC) {
- if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len))
+ if (unlikely(scmd->cmd_len > dev->cdb_len))
goto bad_cdb_len;
xlat_func = ata_get_xlat_func(dev, scsi_op);
} else {
- if (unlikely(!scmd->cmd_len))
- goto bad_cdb_len;
-
- xlat_func = NULL;
if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
/* relay SCSI command to ATAPI device */
int len = COMMAND_SIZE(scsi_op);
--
2.32.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH demo] ata_scsi_queuecmd: Make input parameters check more clearly
2022-01-05 2:17 [PATCH demo] ata_scsi_queuecmd: Make input parameters check more clearly Wenchao Hao
@ 2022-01-05 5:59 ` Damien Le Moal
2022-01-05 6:04 ` Damien Le Moal
1 sibling, 0 replies; 3+ messages in thread
From: Damien Le Moal @ 2022-01-05 5:59 UTC (permalink / raw)
To: Wenchao Hao, linux-ide, linux-kernel; +Cc: Zhiqiang Liu
On 1/5/22 11:17, Wenchao Hao wrote:
> This is just a clean code. Since each branch of "if" state would check
> scmd->cmd_len, so move the check of scmd->cmd_len out of "if" state to
> simplify the logic of input parameters check.
>
> The patch do not change origin function logic.
>
> Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
> ---
> drivers/ata/libata-scsi.c | 11 +++++------
> 1 file changed, 5 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
> index 313e9475507b..1c653b5327db 100644
> --- a/drivers/ata/libata-scsi.c
> +++ b/drivers/ata/libata-scsi.c
> @@ -4020,19 +4020,18 @@ void ata_scsi_dump_cdb(struct ata_port *ap, struct scsi_cmnd *cmd)
> int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev)
> {
> u8 scsi_op = scmd->cmnd[0];
> - ata_xlat_func_t xlat_func;
> + ata_xlat_func_t xlat_func = NULL;
Not needed. xlat_func is always set for the non-error cases.
> int rc = 0;
>
> + if (unlikely(!scmd->cmd_len))
> + goto bad_cdb_len;
> +
> if (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ZAC) {
> - if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len))
> + if (unlikely(scmd->cmd_len > dev->cdb_len))
> goto bad_cdb_len;
>
> xlat_func = ata_get_xlat_func(dev, scsi_op);
> } else {
> - if (unlikely(!scmd->cmd_len))
> - goto bad_cdb_len;
> -
> - xlat_func = NULL;
> if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
> /* relay SCSI command to ATAPI device */
> int len = COMMAND_SIZE(scsi_op);
I would go further and cleanup the if else { if else } sequence too.
Something like this:
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a16ef0030667..ed8be585a98f 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3958,42 +3958,39 @@ int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
struct ata_device *dev)
{
u8 scsi_op = scmd->cmnd[0];
ata_xlat_func_t xlat_func;
- int rc = 0;
+
+ if (unlikely(!scmd->cmd_len))
+ goto bad_cdb_len;
if (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ZAC) {
- if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len))
+ if (unlikely(scmd->cmd_len > dev->cdb_len))
goto bad_cdb_len;
xlat_func = ata_get_xlat_func(dev, scsi_op);
- } else {
- if (unlikely(!scmd->cmd_len))
- goto bad_cdb_len;
+ } else if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
+ /* relay SCSI command to ATAPI device */
+ int len = COMMAND_SIZE(scsi_op);
- xlat_func = NULL;
- if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
- /* relay SCSI command to ATAPI device */
- int len = COMMAND_SIZE(scsi_op);
- if (unlikely(len > scmd->cmd_len ||
- len > dev->cdb_len ||
- scmd->cmd_len > ATAPI_CDB_LEN))
- goto bad_cdb_len;
+ if (unlikely(len > scmd->cmd_len ||
+ len > dev->cdb_len ||
+ scmd->cmd_len > ATAPI_CDB_LEN))
+ goto bad_cdb_len;
- xlat_func = atapi_xlat;
- } else {
- /* ATA_16 passthru, treat as an ATA command */
- if (unlikely(scmd->cmd_len > 16))
- goto bad_cdb_len;
+ xlat_func = atapi_xlat;
+ } else {
+ /* ATA_16 passthru, treat as an ATA command */
+ if (unlikely(scmd->cmd_len > 16))
+ goto bad_cdb_len;
- xlat_func = ata_get_xlat_func(dev, scsi_op);
- }
+ xlat_func = ata_get_xlat_func(dev, scsi_op);
}
if (xlat_func)
- rc = ata_scsi_translate(dev, scmd, xlat_func);
- else
- ata_scsi_simulate(dev, scmd);
+ return ata_scsi_translate(dev, scmd, xlat_func);
- return rc;
+ ata_scsi_simulate(dev, scmd);
+
+ return 0;
bad_cdb_len:
scmd->result = DID_ERROR << 16;
--
Damien Le Moal
Western Digital Research
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH demo] ata_scsi_queuecmd: Make input parameters check more clearly
2022-01-05 2:17 [PATCH demo] ata_scsi_queuecmd: Make input parameters check more clearly Wenchao Hao
2022-01-05 5:59 ` Damien Le Moal
@ 2022-01-05 6:04 ` Damien Le Moal
1 sibling, 0 replies; 3+ messages in thread
From: Damien Le Moal @ 2022-01-05 6:04 UTC (permalink / raw)
To: linux-ide, linux-kernel, haowenchao; +Cc: liuzhiqiang26
Resending my reply as the server mx5.huawei.com bounces back to me all my
emails from @opensource.wdc.com... (error 554, but SPF record is correct !)
On Tue, 2022-01-04 at 21:17 -0500, Wenchao Hao wrote:
> This is just a clean code. Since each branch of "if" state would check
> scmd->cmd_len, so move the check of scmd->cmd_len out of "if" state to
> simplify the logic of input parameters check.
>
> The patch do not change origin function logic.
>
> Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
> ---
> drivers/ata/libata-scsi.c | 11 +++++------
> 1 file changed, 5 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
> index 313e9475507b..1c653b5327db 100644
> --- a/drivers/ata/libata-scsi.c
> +++ b/drivers/ata/libata-scsi.c
> @@ -4020,19 +4020,18 @@ void ata_scsi_dump_cdb(struct ata_port *ap, struct scsi_cmnd *cmd)
> int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev)
> {
> u8 scsi_op = scmd->cmnd[0];
> - ata_xlat_func_t xlat_func;
> + ata_xlat_func_t xlat_func = NULL;
Not needed. xlat_func is always set for the non-error cases.
> int rc = 0;
>
> + if (unlikely(!scmd->cmd_len))
> + goto bad_cdb_len;
> +
> if (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ZAC) {
> - if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len))
> + if (unlikely(scmd->cmd_len > dev->cdb_len))
> goto bad_cdb_len;
>
> xlat_func = ata_get_xlat_func(dev, scsi_op);
> } else {
> - if (unlikely(!scmd->cmd_len))
> - goto bad_cdb_len;
> -
> - xlat_func = NULL;
> if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
> /* relay SCSI command to ATAPI device */
> int len = COMMAND_SIZE(scsi_op);
I would go further and cleanup the if else { if else } sequence too.
Something like this:
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a16ef0030667..ed8be585a98f 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3958,42 +3958,39 @@ int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
struct ata_device *dev)
{
u8 scsi_op = scmd->cmnd[0];
ata_xlat_func_t xlat_func;
- int rc = 0;
+
+ if (unlikely(!scmd->cmd_len))
+ goto bad_cdb_len;
if (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ZAC) {
- if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len))
+ if (unlikely(scmd->cmd_len > dev->cdb_len))
goto bad_cdb_len;
xlat_func = ata_get_xlat_func(dev, scsi_op);
- } else {
- if (unlikely(!scmd->cmd_len))
- goto bad_cdb_len;
+ } else if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
+ /* relay SCSI command to ATAPI device */
+ int len = COMMAND_SIZE(scsi_op);
- xlat_func = NULL;
- if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
- /* relay SCSI command to ATAPI device */
- int len = COMMAND_SIZE(scsi_op);
- if (unlikely(len > scmd->cmd_len ||
- len > dev->cdb_len ||
- scmd->cmd_len > ATAPI_CDB_LEN))
- goto bad_cdb_len;
+ if (unlikely(len > scmd->cmd_len ||
+ len > dev->cdb_len ||
+ scmd->cmd_len > ATAPI_CDB_LEN))
+ goto bad_cdb_len;
- xlat_func = atapi_xlat;
- } else {
- /* ATA_16 passthru, treat as an ATA command */
- if (unlikely(scmd->cmd_len > 16))
- goto bad_cdb_len;
+ xlat_func = atapi_xlat;
+ } else {
+ /* ATA_16 passthru, treat as an ATA command */
+ if (unlikely(scmd->cmd_len > 16))
+ goto bad_cdb_len;
- xlat_func = ata_get_xlat_func(dev, scsi_op);
- }
+ xlat_func = ata_get_xlat_func(dev, scsi_op);
}
if (xlat_func)
- rc = ata_scsi_translate(dev, scmd, xlat_func);
- else
- ata_scsi_simulate(dev, scmd);
+ return ata_scsi_translate(dev, scmd, xlat_func);
- return rc;
+ ata_scsi_simulate(dev, scmd);
+
+ return 0;
bad_cdb_len:
scmd->result = DID_ERROR << 16;
Also please change the patch title prefix to: "ata: libata-scsi: ...."
--
Damien Le Moal
Western Digital Research
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-01-05 6:04 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-05 2:17 [PATCH demo] ata_scsi_queuecmd: Make input parameters check more clearly Wenchao Hao
2022-01-05 5:59 ` Damien Le Moal
2022-01-05 6:04 ` Damien Le Moal
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.