* [PATCH v5] watchdog: nic7018_wdt: Add NIC7018 watchdog driver
@ 2016-12-28 7:51 Hui Chun Ong
2016-12-28 15:25 ` Guenter Roeck
0 siblings, 1 reply; 2+ messages in thread
From: Hui Chun Ong @ 2016-12-28 7:51 UTC (permalink / raw)
To: wim, linux, corbet
Cc: linux-watchdog, linux-doc, jonathan.hearn, julia.cartwright, rjw,
mika.westerberg, Hui Chun Ong
Add support for the watchdog timer on PXI Embedded Controller.
Signed-off-by: Hui Chun Ong <hui.chun.ong@ni.com>
---
v4: Remove nic7018_stop() from nic7018_remove().
Lock WDT registers when watchdog_register_device() call failed.
v3: Update timeout calculation from miliseconds to seconds.
Reorder watchdog_regiser_device() call to prevent potential race condition.
v2: Remove mutex lock and platform_device *pdev fields from struct nic7018_wdt.
Update config NIC7018_WDT description.
Update nic7018_get_config() to never return error.
Remove checking for IO resource size in nic7018_probe().
v1: Remove non-standard attributes.
Change from acpi_driver to platform_driver.
Rename driver from ni7018_wdt to nic7018_wdt.
---
Documentation/watchdog/watchdog-parameters.txt | 5 +
drivers/watchdog/Kconfig | 10 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/nic7018_wdt.c | 265 +++++++++++++++++++++++++
4 files changed, 281 insertions(+)
create mode 100644 drivers/watchdog/nic7018_wdt.c
diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt
index e21850e..4f7d86d 100644
--- a/Documentation/watchdog/watchdog-parameters.txt
+++ b/Documentation/watchdog/watchdog-parameters.txt
@@ -209,6 +209,11 @@ timeout: Initial watchdog timeout in seconds (0<timeout<516, default=60)
nowayout: Watchdog cannot be stopped once started
(default=kernel config parameter)
-------------------------------------------------
+nic7018_wdt:
+timeout: Initial watchdog timeout in seconds (0<timeout<464, default=80)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
nuc900_wdt:
heartbeat: Watchdog heartbeats in seconds.
(default = 15)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index acb00b5..e20eb42 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1326,6 +1326,16 @@ config NI903X_WDT
To compile this driver as a module, choose M here: the module will be
called ni903x_wdt.
+config NIC7018_WDT
+ tristate "NIC7018 Watchdog"
+ depends on X86 && ACPI
+ select WATCHDOG_CORE
+ ---help---
+ Support for National Instruments NIC7018 Watchdog.
+
+ To compile this driver as a module, choose M here: the module will be
+ called nic7018_wdt.
+
# M32R Architecture
# M68K Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 0c3d35e..3af3588 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -139,6 +139,7 @@ obj-$(CONFIG_INTEL_SCU_WATCHDOG) += intel_scu_watchdog.o
obj-$(CONFIG_INTEL_MID_WATCHDOG) += intel-mid_wdt.o
obj-$(CONFIG_INTEL_MEI_WDT) += mei_wdt.o
obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o
+obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o
# M32R Architecture
diff --git a/drivers/watchdog/nic7018_wdt.c b/drivers/watchdog/nic7018_wdt.c
new file mode 100644
index 0000000..dcd2656
--- /dev/null
+++ b/drivers/watchdog/nic7018_wdt.c
@@ -0,0 +1,265 @@
+/*
+ * Copyright (C) 2016 National Instruments Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/acpi.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define LOCK 0xA5
+#define UNLOCK 0x5A
+
+#define WDT_CTRL_RESET_EN BIT(7)
+#define WDT_RELOAD_PORT_EN BIT(7)
+
+#define WDT_CTRL 1
+#define WDT_RELOAD_CTRL 2
+#define WDT_PRESET_PRESCALE 4
+#define WDT_REG_LOCK 5
+#define WDT_COUNT 6
+#define WDT_RELOAD_PORT 7
+
+#define WDT_MIN_TIMEOUT 1
+#define WDT_MAX_TIMEOUT 464
+#define WDT_DEFAULT_TIMEOUT 80
+
+#define WDT_MAX_COUNTER 15
+
+static unsigned int timeout;
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout,
+ "Watchdog timeout in seconds. (default="
+ __MODULE_STRING(WDT_DEFAULT_TIMEOUT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started. (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct nic7018_wdt {
+ u16 io_base;
+ u32 period;
+ struct watchdog_device wdd;
+};
+
+struct nic7018_config {
+ u32 period;
+ u8 divider;
+};
+
+static const struct nic7018_config nic7018_configs[] = {
+ { 2, 4 },
+ { 32, 5 },
+};
+
+static inline u32 nic7018_timeout(u32 period, u8 counter)
+{
+ return period * counter - period / 2;
+}
+
+static const struct nic7018_config *nic7018_get_config(u32 timeout,
+ u8 *counter)
+{
+ const struct nic7018_config *config;
+ u8 count;
+
+ if (timeout < 30 && timeout != 16) {
+ config = &nic7018_configs[0];
+ count = timeout / 2 + 1;
+ } else {
+ config = &nic7018_configs[1];
+ count = DIV_ROUND_UP(timeout + 16, 32);
+
+ if (count > WDT_MAX_COUNTER)
+ count = WDT_MAX_COUNTER;
+ }
+ *counter = count;
+ return config;
+}
+
+static int nic7018_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout)
+{
+ struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd);
+ const struct nic7018_config *config;
+ u8 counter;
+
+ config = nic7018_get_config(timeout, &counter);
+
+ outb(counter << 4 | config->divider,
+ wdt->io_base + WDT_PRESET_PRESCALE);
+
+ wdd->timeout = nic7018_timeout(config->period, counter);
+ wdt->period = config->period;
+
+ return 0;
+}
+
+static int nic7018_start(struct watchdog_device *wdd)
+{
+ struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd);
+ u8 control;
+
+ nic7018_set_timeout(wdd, wdd->timeout);
+
+ control = inb(wdt->io_base + WDT_RELOAD_CTRL);
+ outb(control | WDT_RELOAD_PORT_EN, wdt->io_base + WDT_RELOAD_CTRL);
+
+ outb(1, wdt->io_base + WDT_RELOAD_PORT);
+
+ control = inb(wdt->io_base + WDT_CTRL);
+ outb(control | WDT_CTRL_RESET_EN, wdt->io_base + WDT_CTRL);
+
+ return 0;
+}
+
+static int nic7018_stop(struct watchdog_device *wdd)
+{
+ struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd);
+
+ outb(0, wdt->io_base + WDT_CTRL);
+ outb(0, wdt->io_base + WDT_RELOAD_CTRL);
+ outb(0xF0, wdt->io_base + WDT_PRESET_PRESCALE);
+
+ return 0;
+}
+
+static int nic7018_ping(struct watchdog_device *wdd)
+{
+ struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd);
+
+ outb(1, wdt->io_base + WDT_RELOAD_PORT);
+
+ return 0;
+}
+
+static unsigned int nic7018_get_timeleft(struct watchdog_device *wdd)
+{
+ struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd);
+ u8 count;
+
+ count = inb(wdt->io_base + WDT_COUNT) & 0xF;
+ if (!count)
+ return 0;
+
+ return nic7018_timeout(wdt->period, count);
+}
+
+static const struct watchdog_info nic7018_wdd_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+ .identity = "NIC7018 Watchdog",
+};
+
+static const struct watchdog_ops nic7018_wdd_ops = {
+ .owner = THIS_MODULE,
+ .start = nic7018_start,
+ .stop = nic7018_stop,
+ .ping = nic7018_ping,
+ .set_timeout = nic7018_set_timeout,
+ .get_timeleft = nic7018_get_timeleft,
+};
+
+static int nic7018_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct watchdog_device *wdd;
+ struct nic7018_wdt *wdt;
+ struct resource *io_rc;
+ int ret;
+
+ wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
+ if (!wdt)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, wdt);
+
+ io_rc = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!io_rc) {
+ dev_err(dev, "missing IO resources\n");
+ return -EINVAL;
+ }
+
+ if (!devm_request_region(dev, io_rc->start, resource_size(io_rc),
+ KBUILD_MODNAME)) {
+ dev_err(dev, "failed to get IO region\n");
+ return -EBUSY;
+ }
+
+ wdt->io_base = io_rc->start;
+ wdd = &wdt->wdd;
+ wdd->info = &nic7018_wdd_info;
+ wdd->ops = &nic7018_wdd_ops;
+ wdd->min_timeout = WDT_MIN_TIMEOUT;
+ wdd->max_timeout = WDT_MAX_TIMEOUT;
+ wdd->timeout = WDT_DEFAULT_TIMEOUT;
+ wdd->parent = dev;
+
+ watchdog_set_drvdata(wdd, wdt);
+ watchdog_set_nowayout(wdd, nowayout);
+
+ ret = watchdog_init_timeout(wdd, timeout, dev);
+ if (ret)
+ dev_warn(dev, "unable to set timeout value, using default\n");
+
+ /* Unlock WDT register */
+ outb(UNLOCK, wdt->io_base + WDT_REG_LOCK);
+
+ ret = watchdog_register_device(wdd);
+ if (ret) {
+ outb(LOCK, wdt->io_base + WDT_REG_LOCK);
+ dev_err(dev, "failed to register watchdog\n");
+ return ret;
+ }
+
+ dev_dbg(dev, "io_base=0x%04X, timeout=%d, nowayout=%d\n",
+ wdt->io_base, timeout, nowayout);
+ return 0;
+}
+
+static int nic7018_remove(struct platform_device *pdev)
+{
+ struct nic7018_wdt *wdt = platform_get_drvdata(pdev);
+
+ watchdog_unregister_device(&wdt->wdd);
+
+ /* Lock WDT register */
+ outb(LOCK, wdt->io_base + WDT_REG_LOCK);
+
+ return 0;
+}
+
+static const struct acpi_device_id nic7018_device_ids[] = {
+ {"NIC7018", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, nic7018_device_ids);
+
+static struct platform_driver watchdog_driver = {
+ .probe = nic7018_probe,
+ .remove = nic7018_remove,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .acpi_match_table = ACPI_PTR(nic7018_device_ids),
+ },
+};
+
+module_platform_driver(watchdog_driver);
+
+MODULE_DESCRIPTION("National Instruments NIC7018 Watchdog driver");
+MODULE_AUTHOR("Hui Chun Ong <hui.chun.ong@ni.com>");
+MODULE_LICENSE("GPL");
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v5] watchdog: nic7018_wdt: Add NIC7018 watchdog driver
2016-12-28 7:51 [PATCH v5] watchdog: nic7018_wdt: Add NIC7018 watchdog driver Hui Chun Ong
@ 2016-12-28 15:25 ` Guenter Roeck
0 siblings, 0 replies; 2+ messages in thread
From: Guenter Roeck @ 2016-12-28 15:25 UTC (permalink / raw)
To: Hui Chun Ong, wim, corbet
Cc: linux-watchdog, linux-doc, jonathan.hearn, julia.cartwright, rjw,
mika.westerberg
On 12/27/2016 11:51 PM, Hui Chun Ong wrote:
> Add support for the watchdog timer on PXI Embedded Controller.
>
> Signed-off-by: Hui Chun Ong <hui.chun.ong@ni.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
> v4: Remove nic7018_stop() from nic7018_remove().
> Lock WDT registers when watchdog_register_device() call failed.
>
> v3: Update timeout calculation from miliseconds to seconds.
> Reorder watchdog_regiser_device() call to prevent potential race condition.
>
> v2: Remove mutex lock and platform_device *pdev fields from struct nic7018_wdt.
> Update config NIC7018_WDT description.
> Update nic7018_get_config() to never return error.
> Remove checking for IO resource size in nic7018_probe().
>
> v1: Remove non-standard attributes.
> Change from acpi_driver to platform_driver.
> Rename driver from ni7018_wdt to nic7018_wdt.
> ---
> Documentation/watchdog/watchdog-parameters.txt | 5 +
> drivers/watchdog/Kconfig | 10 +
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/nic7018_wdt.c | 265 +++++++++++++++++++++++++
> 4 files changed, 281 insertions(+)
> create mode 100644 drivers/watchdog/nic7018_wdt.c
>
> diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt
> index e21850e..4f7d86d 100644
> --- a/Documentation/watchdog/watchdog-parameters.txt
> +++ b/Documentation/watchdog/watchdog-parameters.txt
> @@ -209,6 +209,11 @@ timeout: Initial watchdog timeout in seconds (0<timeout<516, default=60)
> nowayout: Watchdog cannot be stopped once started
> (default=kernel config parameter)
> -------------------------------------------------
> +nic7018_wdt:
> +timeout: Initial watchdog timeout in seconds (0<timeout<464, default=80)
> +nowayout: Watchdog cannot be stopped once started
> + (default=kernel config parameter)
> +-------------------------------------------------
> nuc900_wdt:
> heartbeat: Watchdog heartbeats in seconds.
> (default = 15)
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index acb00b5..e20eb42 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1326,6 +1326,16 @@ config NI903X_WDT
> To compile this driver as a module, choose M here: the module will be
> called ni903x_wdt.
>
> +config NIC7018_WDT
> + tristate "NIC7018 Watchdog"
> + depends on X86 && ACPI
> + select WATCHDOG_CORE
> + ---help---
> + Support for National Instruments NIC7018 Watchdog.
> +
> + To compile this driver as a module, choose M here: the module will be
> + called nic7018_wdt.
> +
> # M32R Architecture
>
> # M68K Architecture
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 0c3d35e..3af3588 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -139,6 +139,7 @@ obj-$(CONFIG_INTEL_SCU_WATCHDOG) += intel_scu_watchdog.o
> obj-$(CONFIG_INTEL_MID_WATCHDOG) += intel-mid_wdt.o
> obj-$(CONFIG_INTEL_MEI_WDT) += mei_wdt.o
> obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o
> +obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o
>
> # M32R Architecture
>
> diff --git a/drivers/watchdog/nic7018_wdt.c b/drivers/watchdog/nic7018_wdt.c
> new file mode 100644
> index 0000000..dcd2656
> --- /dev/null
> +++ b/drivers/watchdog/nic7018_wdt.c
> @@ -0,0 +1,265 @@
> +/*
> + * Copyright (C) 2016 National Instruments Corp.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/bitops.h>
> +#include <linux/device.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/watchdog.h>
> +
> +#define LOCK 0xA5
> +#define UNLOCK 0x5A
> +
> +#define WDT_CTRL_RESET_EN BIT(7)
> +#define WDT_RELOAD_PORT_EN BIT(7)
> +
> +#define WDT_CTRL 1
> +#define WDT_RELOAD_CTRL 2
> +#define WDT_PRESET_PRESCALE 4
> +#define WDT_REG_LOCK 5
> +#define WDT_COUNT 6
> +#define WDT_RELOAD_PORT 7
> +
> +#define WDT_MIN_TIMEOUT 1
> +#define WDT_MAX_TIMEOUT 464
> +#define WDT_DEFAULT_TIMEOUT 80
> +
> +#define WDT_MAX_COUNTER 15
> +
> +static unsigned int timeout;
> +module_param(timeout, uint, 0);
> +MODULE_PARM_DESC(timeout,
> + "Watchdog timeout in seconds. (default="
> + __MODULE_STRING(WDT_DEFAULT_TIMEOUT) ")");
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0);
> +MODULE_PARM_DESC(nowayout,
> + "Watchdog cannot be stopped once started. (default="
> + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +struct nic7018_wdt {
> + u16 io_base;
> + u32 period;
> + struct watchdog_device wdd;
> +};
> +
> +struct nic7018_config {
> + u32 period;
> + u8 divider;
> +};
> +
> +static const struct nic7018_config nic7018_configs[] = {
> + { 2, 4 },
> + { 32, 5 },
> +};
> +
> +static inline u32 nic7018_timeout(u32 period, u8 counter)
> +{
> + return period * counter - period / 2;
> +}
> +
> +static const struct nic7018_config *nic7018_get_config(u32 timeout,
> + u8 *counter)
> +{
> + const struct nic7018_config *config;
> + u8 count;
> +
> + if (timeout < 30 && timeout != 16) {
> + config = &nic7018_configs[0];
> + count = timeout / 2 + 1;
> + } else {
> + config = &nic7018_configs[1];
> + count = DIV_ROUND_UP(timeout + 16, 32);
> +
> + if (count > WDT_MAX_COUNTER)
> + count = WDT_MAX_COUNTER;
> + }
> + *counter = count;
> + return config;
> +}
> +
> +static int nic7018_set_timeout(struct watchdog_device *wdd,
> + unsigned int timeout)
> +{
> + struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd);
> + const struct nic7018_config *config;
> + u8 counter;
> +
> + config = nic7018_get_config(timeout, &counter);
> +
> + outb(counter << 4 | config->divider,
> + wdt->io_base + WDT_PRESET_PRESCALE);
> +
> + wdd->timeout = nic7018_timeout(config->period, counter);
> + wdt->period = config->period;
> +
> + return 0;
> +}
> +
> +static int nic7018_start(struct watchdog_device *wdd)
> +{
> + struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd);
> + u8 control;
> +
> + nic7018_set_timeout(wdd, wdd->timeout);
> +
> + control = inb(wdt->io_base + WDT_RELOAD_CTRL);
> + outb(control | WDT_RELOAD_PORT_EN, wdt->io_base + WDT_RELOAD_CTRL);
> +
> + outb(1, wdt->io_base + WDT_RELOAD_PORT);
> +
> + control = inb(wdt->io_base + WDT_CTRL);
> + outb(control | WDT_CTRL_RESET_EN, wdt->io_base + WDT_CTRL);
> +
> + return 0;
> +}
> +
> +static int nic7018_stop(struct watchdog_device *wdd)
> +{
> + struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> + outb(0, wdt->io_base + WDT_CTRL);
> + outb(0, wdt->io_base + WDT_RELOAD_CTRL);
> + outb(0xF0, wdt->io_base + WDT_PRESET_PRESCALE);
> +
> + return 0;
> +}
> +
> +static int nic7018_ping(struct watchdog_device *wdd)
> +{
> + struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> + outb(1, wdt->io_base + WDT_RELOAD_PORT);
> +
> + return 0;
> +}
> +
> +static unsigned int nic7018_get_timeleft(struct watchdog_device *wdd)
> +{
> + struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd);
> + u8 count;
> +
> + count = inb(wdt->io_base + WDT_COUNT) & 0xF;
> + if (!count)
> + return 0;
> +
> + return nic7018_timeout(wdt->period, count);
> +}
> +
> +static const struct watchdog_info nic7018_wdd_info = {
> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> + .identity = "NIC7018 Watchdog",
> +};
> +
> +static const struct watchdog_ops nic7018_wdd_ops = {
> + .owner = THIS_MODULE,
> + .start = nic7018_start,
> + .stop = nic7018_stop,
> + .ping = nic7018_ping,
> + .set_timeout = nic7018_set_timeout,
> + .get_timeleft = nic7018_get_timeleft,
> +};
> +
> +static int nic7018_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct watchdog_device *wdd;
> + struct nic7018_wdt *wdt;
> + struct resource *io_rc;
> + int ret;
> +
> + wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
> + if (!wdt)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, wdt);
> +
> + io_rc = platform_get_resource(pdev, IORESOURCE_IO, 0);
> + if (!io_rc) {
> + dev_err(dev, "missing IO resources\n");
> + return -EINVAL;
> + }
> +
> + if (!devm_request_region(dev, io_rc->start, resource_size(io_rc),
> + KBUILD_MODNAME)) {
> + dev_err(dev, "failed to get IO region\n");
> + return -EBUSY;
> + }
> +
> + wdt->io_base = io_rc->start;
> + wdd = &wdt->wdd;
> + wdd->info = &nic7018_wdd_info;
> + wdd->ops = &nic7018_wdd_ops;
> + wdd->min_timeout = WDT_MIN_TIMEOUT;
> + wdd->max_timeout = WDT_MAX_TIMEOUT;
> + wdd->timeout = WDT_DEFAULT_TIMEOUT;
> + wdd->parent = dev;
> +
> + watchdog_set_drvdata(wdd, wdt);
> + watchdog_set_nowayout(wdd, nowayout);
> +
> + ret = watchdog_init_timeout(wdd, timeout, dev);
> + if (ret)
> + dev_warn(dev, "unable to set timeout value, using default\n");
> +
> + /* Unlock WDT register */
> + outb(UNLOCK, wdt->io_base + WDT_REG_LOCK);
> +
> + ret = watchdog_register_device(wdd);
> + if (ret) {
> + outb(LOCK, wdt->io_base + WDT_REG_LOCK);
> + dev_err(dev, "failed to register watchdog\n");
> + return ret;
> + }
> +
> + dev_dbg(dev, "io_base=0x%04X, timeout=%d, nowayout=%d\n",
> + wdt->io_base, timeout, nowayout);
> + return 0;
> +}
> +
> +static int nic7018_remove(struct platform_device *pdev)
> +{
> + struct nic7018_wdt *wdt = platform_get_drvdata(pdev);
> +
> + watchdog_unregister_device(&wdt->wdd);
> +
> + /* Lock WDT register */
> + outb(LOCK, wdt->io_base + WDT_REG_LOCK);
> +
> + return 0;
> +}
> +
> +static const struct acpi_device_id nic7018_device_ids[] = {
> + {"NIC7018", 0},
> + {"", 0},
> +};
> +MODULE_DEVICE_TABLE(acpi, nic7018_device_ids);
> +
> +static struct platform_driver watchdog_driver = {
> + .probe = nic7018_probe,
> + .remove = nic7018_remove,
> + .driver = {
> + .name = KBUILD_MODNAME,
> + .acpi_match_table = ACPI_PTR(nic7018_device_ids),
> + },
> +};
> +
> +module_platform_driver(watchdog_driver);
> +
> +MODULE_DESCRIPTION("National Instruments NIC7018 Watchdog driver");
> +MODULE_AUTHOR("Hui Chun Ong <hui.chun.ong@ni.com>");
> +MODULE_LICENSE("GPL");
> --
> 2.7.4
>
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-12-28 15:25 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-12-28 7:51 [PATCH v5] watchdog: nic7018_wdt: Add NIC7018 watchdog driver Hui Chun Ong
2016-12-28 15:25 ` Guenter Roeck
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.