Re: [Xenomai-help] Porting I-Pipe for new ARM board

[Sergey Didenko <didenkos@domain.hid>]

[-- Attachment #1.1: Type: text/plain, Size: 1590 bytes --]

Hello

Here it is!
I'm very sorry for this delay, it was related to 2 facts:
1) before publishing I wanted to put the code in order and to verify once
again
2) I was extremely busy these days, especially with the project on Xenoimai
and I could not do anything with that code except making my project work on
it.

I want to say only that it is working and you can use it with some changes
for your board.
One more time sorry for very late reply.

Gilles, did you get this code (I sent it to you 11.05) ?

Sergey

2009/11/6 Wael Showair <showair2003@domain.hid>

> Hi Sergey & Gilles,
> Could anyone of you please put any version of the patch on the
> mailing-list.
> you said you can send it to me within 10 hours or on last Monday?
>
> i really want to my kernel to boot on orion marvell processor.
> thanks for your help
>
> ------------------------------
> *From:* Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
> *To:* Didenko Sergey <didenkos@domain.hid>
>
> *Cc:* Wael Showair <showair2003@domain.hid>; Xenomai-help@domain.hid
> *Sent:* Wed, November 4, 2009 12:54:32 PM
>
> *Subject:* Re: [Xenomai-help] Porting I-Pipe for new ARM board
>
> Didenko Sergey wrote:
> > Gilles, I gues you are talking about the code which I got for MV 88F6290.
> > With some changes it is working on my board now, so, Wael, if you
> > want, I can send it to you in 10 hours, it should work on your board.
>
> Hi Sergey,
>
> Do you intend to publish your patch, or should we restart from the one
> which Philippe did?
>
> Regards.
>
> --
>                                           Gilles
>
>
>

[-- Attachment #1.2: Type: text/html, Size: 2959 bytes --]

[-- Attachment #2: mv88f6290.tar.bz2 --]
[-- Type: application/x-bzip2, Size: 5319 bytes --]