All of lore.kernel.org
 help / color / mirror / Atom feed
From: Robin Murphy <robin.murphy@arm.com>
To: Heiko Stuebner <heiko@sntech.de>,
	hjc@rock-chips.com, architt@codeaurora.org, a.hajda@samsung.com,
	kishon@ti.com
Cc: mark.rutland@arm.com, Jose.Abreu@synopsys.com,
	algea.cao@rock-chips.com, devicetree@vger.kernel.org,
	airlied@linux.ie, dri-devel@lists.freedesktop.org,
	linux-rockchip@lists.infradead.org, robh+dt@kernel.org,
	Laurent.pinchart@ideasonboard.com,
	linux-arm-kernel@lists.infradead.org, zhengyang@rock-chips.com
Subject: Re: [PATCH v2 0/8] drm/rockchip: hdmi support for rk3328
Date: Wed, 21 Feb 2018 12:07:34 +0000	[thread overview]
Message-ID: <1f50b49e-d402-3621-c2e8-9e0a96e859f9@arm.com> (raw)
In-Reply-To: <20180216204158.29839-1-heiko@sntech.de>

On 16/02/18 20:41, Heiko Stuebner wrote:
> The rk3228/rk3229 and rk3328 socs started using a new type of hdmi-phy
> from Innosilicon that resides completely separate from the dw-hdmi block
> and gets accessed via mmio.
> 
> Additionally the rk3328 dw-hdmi does not report the vendor-phy type
> but a different one instead, so add the possibility to override the
> phy type when the glue driver knows better than the ip block itself.
> 
> 
> I've put both the phy driver and dw-hdmi changes into one series just
> to showcase how everything comes together, but would of course still
> expect things to go through the separate phy and drm trees once deemed
> ready.
> 
> So patches 1+2 are expected to go through the phy-tree and the rest
> should go through the drm tree.

For patches 2, 3, 4, 6, 7, 8,

Tested-by: Robin Murphy <robin.murphy@arm.com>

> changes in v2:
> - phy: prevent overflow in tmdsclk calculation
>    as reported by Martin Cerveny
> - phy: use unsigned long for all tmdsclk rate uses
> - phy: simplify tmds rate calculation
> 
> - dropped patch exporting some dw-hdmi phy functions
>    as a similar patch entered drm-misc already
> 
> Heiko Stuebner (6):
>    drm/bridge: dw-hdmi: allow overriding of phy-type reading
>    drm/rockchip: dw_hdmi: Allow outputs that don't need output switching
>    dt-bindings: allow optional phys in Rockchip dw_hdmi binding
>    drm/rockchip: dw_hdmi: allow including external phys
>    drm/rockchip: dw_hdmi: store rockchip_hdmi reference in phy_data
>      object
>    drm/rockchip: dw_hdmi: add dw-hdmi support for the rk3328
> 
> Zheng Yang (2):
>    dt-bindings: add binding for Rockchip hdmi phy using an Innosilicon IP
>    phy: add Rockchip Innosilicon hdmi phy
> 
>   .../bindings/display/rockchip/dw_hdmi-rockchip.txt |    3 +
>   .../bindings/phy/phy-rockchip-inno-hdmi.txt        |   42 +
>   drivers/gpu/drm/bridge/synopsys/dw-hdmi.c          |    4 +-
>   drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c        |  130 ++-
>   drivers/phy/rockchip/Kconfig                       |    7 +
>   drivers/phy/rockchip/Makefile                      |    1 +
>   drivers/phy/rockchip/phy-rockchip-inno-hdmi.c      | 1209 ++++++++++++++++++++
>   include/drm/bridge/dw_hdmi.h                       |    1 +
>   8 files changed, 1393 insertions(+), 4 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt
>   create mode 100644 drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

WARNING: multiple messages have this Message-ID (diff)
From: robin.murphy@arm.com (Robin Murphy)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/8] drm/rockchip: hdmi support for rk3328
Date: Wed, 21 Feb 2018 12:07:34 +0000	[thread overview]
Message-ID: <1f50b49e-d402-3621-c2e8-9e0a96e859f9@arm.com> (raw)
In-Reply-To: <20180216204158.29839-1-heiko@sntech.de>

On 16/02/18 20:41, Heiko Stuebner wrote:
> The rk3228/rk3229 and rk3328 socs started using a new type of hdmi-phy
> from Innosilicon that resides completely separate from the dw-hdmi block
> and gets accessed via mmio.
> 
> Additionally the rk3328 dw-hdmi does not report the vendor-phy type
> but a different one instead, so add the possibility to override the
> phy type when the glue driver knows better than the ip block itself.
> 
> 
> I've put both the phy driver and dw-hdmi changes into one series just
> to showcase how everything comes together, but would of course still
> expect things to go through the separate phy and drm trees once deemed
> ready.
> 
> So patches 1+2 are expected to go through the phy-tree and the rest
> should go through the drm tree.

For patches 2, 3, 4, 6, 7, 8,

Tested-by: Robin Murphy <robin.murphy@arm.com>

> changes in v2:
> - phy: prevent overflow in tmdsclk calculation
>    as reported by Martin Cerveny
> - phy: use unsigned long for all tmdsclk rate uses
> - phy: simplify tmds rate calculation
> 
> - dropped patch exporting some dw-hdmi phy functions
>    as a similar patch entered drm-misc already
> 
> Heiko Stuebner (6):
>    drm/bridge: dw-hdmi: allow overriding of phy-type reading
>    drm/rockchip: dw_hdmi: Allow outputs that don't need output switching
>    dt-bindings: allow optional phys in Rockchip dw_hdmi binding
>    drm/rockchip: dw_hdmi: allow including external phys
>    drm/rockchip: dw_hdmi: store rockchip_hdmi reference in phy_data
>      object
>    drm/rockchip: dw_hdmi: add dw-hdmi support for the rk3328
> 
> Zheng Yang (2):
>    dt-bindings: add binding for Rockchip hdmi phy using an Innosilicon IP
>    phy: add Rockchip Innosilicon hdmi phy
> 
>   .../bindings/display/rockchip/dw_hdmi-rockchip.txt |    3 +
>   .../bindings/phy/phy-rockchip-inno-hdmi.txt        |   42 +
>   drivers/gpu/drm/bridge/synopsys/dw-hdmi.c          |    4 +-
>   drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c        |  130 ++-
>   drivers/phy/rockchip/Kconfig                       |    7 +
>   drivers/phy/rockchip/Makefile                      |    1 +
>   drivers/phy/rockchip/phy-rockchip-inno-hdmi.c      | 1209 ++++++++++++++++++++
>   include/drm/bridge/dw_hdmi.h                       |    1 +
>   8 files changed, 1393 insertions(+), 4 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt
>   create mode 100644 drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
> 

  parent reply	other threads:[~2018-02-21 12:07 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-16 20:41 [PATCH v2 0/8] drm/rockchip: hdmi support for rk3328 Heiko Stuebner
2018-02-16 20:41 ` Heiko Stuebner
2018-02-16 20:41 ` [PATCH v2 1/8] dt-bindings: add binding for Rockchip hdmi phy using an Innosilicon IP Heiko Stuebner
2018-02-16 20:41   ` Heiko Stuebner
2018-02-16 20:43   ` Heiko Stuebner
2018-02-16 20:43     ` Heiko Stuebner
     [not found] ` <20180216204158.29839-1-heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2018-02-16 20:41   ` [PATCH v2 2/8] phy: add Rockchip Innosilicon hdmi phy Heiko Stuebner
2018-02-16 20:41     ` Heiko Stuebner
2018-02-16 20:41   ` [PATCH v2 3/8] drm/bridge: dw-hdmi: allow overriding of phy-type reading Heiko Stuebner
2018-02-16 20:41     ` Heiko Stuebner
2018-02-19 16:59     ` Laurent Pinchart
2018-02-19 16:59       ` Laurent Pinchart
2018-02-19 18:46       ` Heiko Stuebner
2018-02-19 18:46         ` Heiko Stuebner
2018-02-19 19:06         ` Laurent Pinchart
2018-02-19 19:06           ` Laurent Pinchart
2018-02-21 18:55           ` Heiko Stuebner
2018-02-21 18:55             ` Heiko Stuebner
2018-02-21 19:15             ` Laurent Pinchart
2018-02-21 19:15               ` Laurent Pinchart
2018-02-16 20:41   ` [PATCH v2 4/8] drm/rockchip: dw_hdmi: Allow outputs that don't need output switching Heiko Stuebner
2018-02-16 20:41     ` Heiko Stuebner
2018-02-19 11:43     ` Robin Murphy
2018-02-19 11:43       ` Robin Murphy
2018-02-19 11:49       ` Heiko Stuebner
2018-02-19 11:49         ` Heiko Stuebner
2018-02-16 20:41   ` [PATCH v2 5/8] dt-bindings: allow optional phys in Rockchip dw_hdmi binding Heiko Stuebner
2018-02-16 20:41     ` Heiko Stuebner
2018-02-19 20:26     ` Rob Herring
2018-02-19 20:26       ` Rob Herring
2018-02-16 20:41   ` [PATCH v2 6/8] drm/rockchip: dw_hdmi: allow including external phys Heiko Stuebner
2018-02-16 20:41     ` Heiko Stuebner
2018-02-16 20:41   ` [PATCH v2 7/8] drm/rockchip: dw_hdmi: store rockchip_hdmi reference in phy_data object Heiko Stuebner
2018-02-16 20:41     ` Heiko Stuebner
2018-02-19 11:46     ` Robin Murphy
2018-02-19 11:46       ` Robin Murphy
2018-02-16 20:41   ` [PATCH v2 8/8] drm/rockchip: dw_hdmi: add dw-hdmi support for the rk3328 Heiko Stuebner
2018-02-16 20:41     ` Heiko Stuebner
2018-02-19 20:28     ` Rob Herring
2018-02-19 20:28       ` Rob Herring
2018-02-19 20:46       ` Heiko Stuebner
2018-02-19 20:46         ` Heiko Stuebner
2018-02-20 14:32         ` Rob Herring
2018-02-20 14:32           ` Rob Herring
2018-02-21 12:07 ` Robin Murphy [this message]
2018-02-21 12:07   ` [PATCH v2 0/8] drm/rockchip: hdmi support for rk3328 Robin Murphy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1f50b49e-d402-3621-c2e8-9e0a96e859f9@arm.com \
    --to=robin.murphy@arm.com \
    --cc=Jose.Abreu@synopsys.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=algea.cao@rock-chips.com \
    --cc=architt@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=heiko@sntech.de \
    --cc=hjc@rock-chips.com \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=zhengyang@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.