[PATCH V1 0/2] Fix WLED FSC Sync and brightness Sync settings

[PATCH V1 0/2] Fix WLED FSC Sync and brightness Sync settings

[Kiran Gunda]

The FSC (Full scale current) setting is not updated properly due to the
wrong register toggling for WLED5. Also the ILED_SYNC toggle and MOD_SYNC
toggle sequence is updated as per the hardware team recommendation to fix
the FSC update and brightness update issue.

Kiran Gunda (2):
  backlight: qcom-wled: Fix FSC update issue for WLED5
  backlight: qcom-wled: Correct the sync_toggle sequence

 drivers/video/backlight/qcom-wled.c | 37 +++++++++++++++++++++++++------------
 1 file changed, 25 insertions(+), 12 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
 a Linux Foundation Collaborative Project

[PATCH V1 0/2] Fix WLED FSC Sync and brightness Sync settings

[Kiran Gunda]

The FSC (Full scale current) setting is not updated properly due to the
wrong register toggling for WLED5. Also the ILED_SYNC toggle and MOD_SYNC
toggle sequence is updated as per the hardware team recommendation to fix
the FSC update and brightness update issue.

Kiran Gunda (2):
  backlight: qcom-wled: Fix FSC update issue for WLED5
  backlight: qcom-wled: Correct the sync_toggle sequence

 drivers/video/backlight/qcom-wled.c | 37 +++++++++++++++++++++++++------------
 1 file changed, 25 insertions(+), 12 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
 a Linux Foundation Collaborative Project

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH V1 1/2] backlight: qcom-wled: Fix FSC update issue for WLED5

[Kiran Gunda]

Currently, for WLED5, after FSC register update MOD_SYNC_BIT
is toggled instead of SYNC_BIT. MOD_SYNC_BIT has to be toggled
after the brightness update and SYNC_BIT has to be toggled after
FSC update for WLED5. Fix it.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
---
 drivers/video/backlight/qcom-wled.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index 3bc7800..aef52b9 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -348,7 +348,7 @@ static int wled3_sync_toggle(struct wled *wled)
 	return rc;
 }
 
-static int wled5_sync_toggle(struct wled *wled)
+static int wled5_mod_sync_toggle(struct wled *wled)
 {
 	int rc;
 	u8 val;
@@ -445,10 +445,23 @@ static int wled_update_status(struct backlight_device *bl)
 			goto unlock_mutex;
 		}
 
-		rc = wled->wled_sync_toggle(wled);
-		if (rc < 0) {
-			dev_err(wled->dev, "wled sync failed rc:%d\n", rc);
-			goto unlock_mutex;
+		if (wled->version < 5) {
+			rc = wled->wled_sync_toggle(wled);
+			if (rc < 0) {
+				dev_err(wled->dev, "wled sync failed rc:%d\n", rc);
+				goto unlock_mutex;
+			}
+		} else {
+			/*
+			 * For WLED5 toggling the MOD_SYNC_BIT updates the
+			 * brightness
+			 */
+			rc = wled5_mod_sync_toggle(wled);
+			if (rc < 0) {
+				dev_err(wled->dev, "wled mod sync failed rc:%d\n",
+					rc);
+				goto unlock_mutex;
+			}
 		}
 	}
 
@@ -1459,7 +1472,7 @@ static int wled_configure(struct wled *wled)
 		size = ARRAY_SIZE(wled5_opts);
 		*cfg = wled5_config_defaults;
 		wled->wled_set_brightness = wled5_set_brightness;
-		wled->wled_sync_toggle = wled5_sync_toggle;
+		wled->wled_sync_toggle = wled3_sync_toggle;
 		wled->wled_cabc_config = wled5_cabc_config;
 		wled->wled_ovp_delay = wled5_ovp_delay;
 		wled->wled_auto_detection_required =
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
 a Linux Foundation Collaborative Project

[PATCH V1 1/2] backlight: qcom-wled: Fix FSC update issue for WLED5

[Kiran Gunda]

Currently, for WLED5, after FSC register update MOD_SYNC_BIT
is toggled instead of SYNC_BIT. MOD_SYNC_BIT has to be toggled
after the brightness update and SYNC_BIT has to be toggled after
FSC update for WLED5. Fix it.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
---
 drivers/video/backlight/qcom-wled.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index 3bc7800..aef52b9 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -348,7 +348,7 @@ static int wled3_sync_toggle(struct wled *wled)
 	return rc;
 }
 
-static int wled5_sync_toggle(struct wled *wled)
+static int wled5_mod_sync_toggle(struct wled *wled)
 {
 	int rc;
 	u8 val;
@@ -445,10 +445,23 @@ static int wled_update_status(struct backlight_device *bl)
 			goto unlock_mutex;
 		}
 
-		rc = wled->wled_sync_toggle(wled);
-		if (rc < 0) {
-			dev_err(wled->dev, "wled sync failed rc:%d\n", rc);
-			goto unlock_mutex;
+		if (wled->version < 5) {
+			rc = wled->wled_sync_toggle(wled);
+			if (rc < 0) {
+				dev_err(wled->dev, "wled sync failed rc:%d\n", rc);
+				goto unlock_mutex;
+			}
+		} else {
+			/*
+			 * For WLED5 toggling the MOD_SYNC_BIT updates the
+			 * brightness
+			 */
+			rc = wled5_mod_sync_toggle(wled);
+			if (rc < 0) {
+				dev_err(wled->dev, "wled mod sync failed rc:%d\n",
+					rc);
+				goto unlock_mutex;
+			}
 		}
 	}
 
@@ -1459,7 +1472,7 @@ static int wled_configure(struct wled *wled)
 		size = ARRAY_SIZE(wled5_opts);
 		*cfg = wled5_config_defaults;
 		wled->wled_set_brightness = wled5_set_brightness;
-		wled->wled_sync_toggle = wled5_sync_toggle;
+		wled->wled_sync_toggle = wled3_sync_toggle;
 		wled->wled_cabc_config = wled5_cabc_config;
 		wled->wled_ovp_delay = wled5_ovp_delay;
 		wled->wled_auto_detection_required =
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
 a Linux Foundation Collaborative Project

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH V1 2/2] backlight: qcom-wled: Correct the sync_toggle sequence

[Kiran Gunda]

Currently the FSC SYNC_BIT and MOD_SYNC_BIT are toggled
from 1 to 0 to update the FSC and brightenss settings.
Change this sequence form 0 to 1 as per the hardware team
recommendation to update the FSC and brightness correctly.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
---
 drivers/video/backlight/qcom-wled.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index aef52b9..19f83ac 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -337,13 +337,13 @@ static int wled3_sync_toggle(struct wled *wled)
 
 	rc = regmap_update_bits(wled->regmap,
 				wled->ctrl_addr + WLED3_SINK_REG_SYNC,
-				mask, mask);
+				mask, WLED3_SINK_REG_SYNC_CLEAR);
 	if (rc < 0)
 		return rc;
 
 	rc = regmap_update_bits(wled->regmap,
 				wled->ctrl_addr + WLED3_SINK_REG_SYNC,
-				mask, WLED3_SINK_REG_SYNC_CLEAR);
+				mask, mask);
 
 	return rc;
 }
@@ -353,17 +353,17 @@ static int wled5_mod_sync_toggle(struct wled *wled)
 	int rc;
 	u8 val;
 
-	val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :
-					     WLED5_SINK_REG_SYNC_MOD_B_BIT;
 	rc = regmap_update_bits(wled->regmap,
 				wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
-				WLED5_SINK_REG_SYNC_MASK, val);
+				WLED5_SINK_REG_SYNC_MASK, 0);
 	if (rc < 0)
 		return rc;
 
+	val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :
+					     WLED5_SINK_REG_SYNC_MOD_B_BIT;
 	return regmap_update_bits(wled->regmap,
 				  wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
-				  WLED5_SINK_REG_SYNC_MASK, 0);
+				  WLED5_SINK_REG_SYNC_MASK, val);
 }
 
 static int wled_ovp_fault_status(struct wled *wled, bool *fault_set)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
 a Linux Foundation Collaborative Project

[PATCH V1 2/2] backlight: qcom-wled: Correct the sync_toggle sequence

[Kiran Gunda]

Currently the FSC SYNC_BIT and MOD_SYNC_BIT are toggled
from 1 to 0 to update the FSC and brightenss settings.
Change this sequence form 0 to 1 as per the hardware team
recommendation to update the FSC and brightness correctly.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
---
 drivers/video/backlight/qcom-wled.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index aef52b9..19f83ac 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -337,13 +337,13 @@ static int wled3_sync_toggle(struct wled *wled)
 
 	rc = regmap_update_bits(wled->regmap,
 				wled->ctrl_addr + WLED3_SINK_REG_SYNC,
-				mask, mask);
+				mask, WLED3_SINK_REG_SYNC_CLEAR);
 	if (rc < 0)
 		return rc;
 
 	rc = regmap_update_bits(wled->regmap,
 				wled->ctrl_addr + WLED3_SINK_REG_SYNC,
-				mask, WLED3_SINK_REG_SYNC_CLEAR);
+				mask, mask);
 
 	return rc;
 }
@@ -353,17 +353,17 @@ static int wled5_mod_sync_toggle(struct wled *wled)
 	int rc;
 	u8 val;
 
-	val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :
-					     WLED5_SINK_REG_SYNC_MOD_B_BIT;
 	rc = regmap_update_bits(wled->regmap,
 				wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
-				WLED5_SINK_REG_SYNC_MASK, val);
+				WLED5_SINK_REG_SYNC_MASK, 0);
 	if (rc < 0)
 		return rc;
 
+	val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :
+					     WLED5_SINK_REG_SYNC_MOD_B_BIT;
 	return regmap_update_bits(wled->regmap,
 				  wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
-				  WLED5_SINK_REG_SYNC_MASK, 0);
+				  WLED5_SINK_REG_SYNC_MASK, val);
 }
 
 static int wled_ovp_fault_status(struct wled *wled, bool *fault_set)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
 a Linux Foundation Collaborative Project

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH V1 0/2] Fix WLED FSC Sync and brightness Sync settings

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 442 bytes --]

Hi!

> The FSC (Full scale current) setting is not updated properly due to the
> wrong register toggling for WLED5. Also the ILED_SYNC toggle and MOD_SYNC
> toggle sequence is updated as per the hardware team recommendation to fix
> the FSC update and brightness update issue.

If this is phone hardware, it might make sense to cc:
phone-devel@vger...

Best regards,
									Pavel

-- 
http://www.livejournal.com/~pavelmachek

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH V1 0/2] Fix WLED FSC Sync and brightness Sync settings

[Pavel Machek]

[-- Attachment #1.1: Type: text/plain, Size: 442 bytes --]

Hi!

> The FSC (Full scale current) setting is not updated properly due to the
> wrong register toggling for WLED5. Also the ILED_SYNC toggle and MOD_SYNC
> toggle sequence is updated as per the hardware team recommendation to fix
> the FSC update and brightness update issue.

If this is phone hardware, it might make sense to cc:
phone-devel@vger...

Best regards,
									Pavel

-- 
http://www.livejournal.com/~pavelmachek

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH V1 0/2] Fix WLED FSC Sync and brightness Sync settings

[kgunda]

On 2021-02-19 23:38, Pavel Machek wrote:
> Hi!
> 
>> The FSC (Full scale current) setting is not updated properly due to 
>> the
>> wrong register toggling for WLED5. Also the ILED_SYNC toggle and 
>> MOD_SYNC
>> toggle sequence is updated as per the hardware team recommendation to 
>> fix
>> the FSC update and brightness update issue.
> 
> If this is phone hardware, it might make sense to cc:
> phone-devel@vger...
> 
Yes. it is for phone hardware. Will cc the email.
> Best regards,
> 									Pavel

Re: [PATCH V1 0/2] Fix WLED FSC Sync and brightness Sync settings

[kgunda]

On 2021-02-19 23:38, Pavel Machek wrote:
> Hi!
> 
>> The FSC (Full scale current) setting is not updated properly due to 
>> the
>> wrong register toggling for WLED5. Also the ILED_SYNC toggle and 
>> MOD_SYNC
>> toggle sequence is updated as per the hardware team recommendation to 
>> fix
>> the FSC update and brightness update issue.
> 
> If this is phone hardware, it might make sense to cc:
> phone-devel@vger...
> 
Yes. it is for phone hardware. Will cc the email.
> Best regards,
> 									Pavel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH V1 0/2] Fix WLED FSC Sync and brightness Sync settings

[Kiran Gunda]

The FSC (Full scale current) setting is not updated properly due to the
wrong register toggling for WLED5. Also the ILED_SYNC toggle and MOD_SYNC
toggle sequence is updated as per the hardware team recommendation to fix
the FSC update and brightness update issue.

Kiran Gunda (2):
  backlight: qcom-wled: Fix FSC update issue for WLED5
  backlight: qcom-wled: Correct the sync_toggle sequence

 drivers/video/backlight/qcom-wled.c | 37 +++++++++++++++++++++++++------------
 1 file changed, 25 insertions(+), 12 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
 a Linux Foundation Collaborative Project

[PATCH V1 0/2] Fix WLED FSC Sync and brightness Sync settings

[Kiran Gunda]

The FSC (Full scale current) setting is not updated properly due to the
wrong register toggling for WLED5. Also the ILED_SYNC toggle and MOD_SYNC
toggle sequence is updated as per the hardware team recommendation to fix
the FSC update and brightness update issue.

Kiran Gunda (2):
  backlight: qcom-wled: Fix FSC update issue for WLED5
  backlight: qcom-wled: Correct the sync_toggle sequence

 drivers/video/backlight/qcom-wled.c | 37 +++++++++++++++++++++++++------------
 1 file changed, 25 insertions(+), 12 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
 a Linux Foundation Collaborative Project

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel