All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	linux-amlogic@lists.infradead.org
Cc: narmstrong@baylibre.com, mturquette@baylibre.com,
	sboyd@kernel.org, khilman@baylibre.com,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{,2}_in_sel
Date: Mon, 24 May 2021 16:30:37 +0200	[thread overview]
Message-ID: <1jmtskb3w2.fsf@starbuckisacylon.baylibre.com> (raw)
In-Reply-To: <20210524134517.687089-1-martin.blumenstingl@googlemail.com>


On Mon 24 May 2021 at 15:45, Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote:

> Use CLK_SET_RATE_NO_REPARENT for the vclk{,2}_in_sel clocks. The only
> parent which is actually used is vid_pll_final_div. This should be set
> using assigned-clock-parents in the .dts rather than removing some
> "unwanted" clock parents from the clock driver.
>
> Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> After a hint from Jerome (thanks) this is the improved version of
> "clk: meson: meson8b: Don't use MPLL1 as parent of vclk_in_sel" from [0]
>
>
> [0] https://patchwork.kernel.org/project/linux-clk/patch/20210524104533.555953-1-martin.blumenstingl@googlemail.com/
>
>
>  drivers/clk/meson/meson8b.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
> index a844d35b553a..0f8bd707217a 100644
> --- a/drivers/clk/meson/meson8b.c
> +++ b/drivers/clk/meson/meson8b.c
> @@ -1175,7 +1175,7 @@ static struct clk_regmap meson8b_vclk_in_sel = {
>  		.ops = &clk_regmap_mux_ro_ops,

I just noticed that these muxes are read-only ATM.
It does not make this change (or the previous one) wrong but it does not
make much sense as the mux won't ever change.

I suppose you make this mutable with another patch later on ?


>  		.parent_hws = meson8b_vclk_mux_parent_hws,
>  		.num_parents = ARRAY_SIZE(meson8b_vclk_mux_parent_hws),
> -		.flags = CLK_SET_RATE_PARENT,
> +		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
>  	},
>  };
>  
> @@ -1358,7 +1358,7 @@ static struct clk_regmap meson8b_vclk2_in_sel = {
>  		.ops = &clk_regmap_mux_ro_ops,
>  		.parent_hws = meson8b_vclk_mux_parent_hws,
>  		.num_parents = ARRAY_SIZE(meson8b_vclk_mux_parent_hws),
> -		.flags = CLK_SET_RATE_PARENT,
> +		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
>  	},
>  };


WARNING: multiple messages have this Message-ID (diff)
From: Jerome Brunet <jbrunet@baylibre.com>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	linux-amlogic@lists.infradead.org
Cc: narmstrong@baylibre.com, mturquette@baylibre.com,
	sboyd@kernel.org, khilman@baylibre.com,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{,2}_in_sel
Date: Mon, 24 May 2021 16:30:37 +0200	[thread overview]
Message-ID: <1jmtskb3w2.fsf@starbuckisacylon.baylibre.com> (raw)
In-Reply-To: <20210524134517.687089-1-martin.blumenstingl@googlemail.com>


On Mon 24 May 2021 at 15:45, Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote:

> Use CLK_SET_RATE_NO_REPARENT for the vclk{,2}_in_sel clocks. The only
> parent which is actually used is vid_pll_final_div. This should be set
> using assigned-clock-parents in the .dts rather than removing some
> "unwanted" clock parents from the clock driver.
>
> Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> After a hint from Jerome (thanks) this is the improved version of
> "clk: meson: meson8b: Don't use MPLL1 as parent of vclk_in_sel" from [0]
>
>
> [0] https://patchwork.kernel.org/project/linux-clk/patch/20210524104533.555953-1-martin.blumenstingl@googlemail.com/
>
>
>  drivers/clk/meson/meson8b.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
> index a844d35b553a..0f8bd707217a 100644
> --- a/drivers/clk/meson/meson8b.c
> +++ b/drivers/clk/meson/meson8b.c
> @@ -1175,7 +1175,7 @@ static struct clk_regmap meson8b_vclk_in_sel = {
>  		.ops = &clk_regmap_mux_ro_ops,

I just noticed that these muxes are read-only ATM.
It does not make this change (or the previous one) wrong but it does not
make much sense as the mux won't ever change.

I suppose you make this mutable with another patch later on ?


>  		.parent_hws = meson8b_vclk_mux_parent_hws,
>  		.num_parents = ARRAY_SIZE(meson8b_vclk_mux_parent_hws),
> -		.flags = CLK_SET_RATE_PARENT,
> +		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
>  	},
>  };
>  
> @@ -1358,7 +1358,7 @@ static struct clk_regmap meson8b_vclk2_in_sel = {
>  		.ops = &clk_regmap_mux_ro_ops,
>  		.parent_hws = meson8b_vclk_mux_parent_hws,
>  		.num_parents = ARRAY_SIZE(meson8b_vclk_mux_parent_hws),
> -		.flags = CLK_SET_RATE_PARENT,
> +		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
>  	},
>  };


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Jerome Brunet <jbrunet@baylibre.com>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	linux-amlogic@lists.infradead.org
Cc: narmstrong@baylibre.com, mturquette@baylibre.com,
	sboyd@kernel.org, khilman@baylibre.com,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{,2}_in_sel
Date: Mon, 24 May 2021 16:30:37 +0200	[thread overview]
Message-ID: <1jmtskb3w2.fsf@starbuckisacylon.baylibre.com> (raw)
In-Reply-To: <20210524134517.687089-1-martin.blumenstingl@googlemail.com>


On Mon 24 May 2021 at 15:45, Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote:

> Use CLK_SET_RATE_NO_REPARENT for the vclk{,2}_in_sel clocks. The only
> parent which is actually used is vid_pll_final_div. This should be set
> using assigned-clock-parents in the .dts rather than removing some
> "unwanted" clock parents from the clock driver.
>
> Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> After a hint from Jerome (thanks) this is the improved version of
> "clk: meson: meson8b: Don't use MPLL1 as parent of vclk_in_sel" from [0]
>
>
> [0] https://patchwork.kernel.org/project/linux-clk/patch/20210524104533.555953-1-martin.blumenstingl@googlemail.com/
>
>
>  drivers/clk/meson/meson8b.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
> index a844d35b553a..0f8bd707217a 100644
> --- a/drivers/clk/meson/meson8b.c
> +++ b/drivers/clk/meson/meson8b.c
> @@ -1175,7 +1175,7 @@ static struct clk_regmap meson8b_vclk_in_sel = {
>  		.ops = &clk_regmap_mux_ro_ops,

I just noticed that these muxes are read-only ATM.
It does not make this change (or the previous one) wrong but it does not
make much sense as the mux won't ever change.

I suppose you make this mutable with another patch later on ?


>  		.parent_hws = meson8b_vclk_mux_parent_hws,
>  		.num_parents = ARRAY_SIZE(meson8b_vclk_mux_parent_hws),
> -		.flags = CLK_SET_RATE_PARENT,
> +		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
>  	},
>  };
>  
> @@ -1358,7 +1358,7 @@ static struct clk_regmap meson8b_vclk2_in_sel = {
>  		.ops = &clk_regmap_mux_ro_ops,
>  		.parent_hws = meson8b_vclk_mux_parent_hws,
>  		.num_parents = ARRAY_SIZE(meson8b_vclk_mux_parent_hws),
> -		.flags = CLK_SET_RATE_PARENT,
> +		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
>  	},
>  };


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply	other threads:[~2021-05-24 14:30 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-24 13:45 [PATCH v2] clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{,2}_in_sel Martin Blumenstingl
2021-05-24 13:45 ` [PATCH v2] clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{, 2}_in_sel Martin Blumenstingl
2021-05-24 13:45 ` Martin Blumenstingl
2021-05-24 14:30 ` Jerome Brunet [this message]
2021-05-24 14:30   ` [PATCH v2] clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{,2}_in_sel Jerome Brunet
2021-05-24 14:30   ` Jerome Brunet
2021-05-24 17:14   ` Martin Blumenstingl
2021-05-24 17:14     ` [PATCH v2] clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{, 2}_in_sel Martin Blumenstingl
2021-05-24 17:14     ` Martin Blumenstingl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1jmtskb3w2.fsf@starbuckisacylon.baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=mturquette@baylibre.com \
    --cc=narmstrong@baylibre.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.