* (no subject)
@ 2003-01-31 18:46 saurabh khanna
2003-02-03 12:53 ` your mail Alexander Kellett
0 siblings, 1 reply; 2+ messages in thread
From: saurabh khanna @ 2003-01-31 18:46 UTC (permalink / raw)
To: linux-kernel
Problem: My xwindows did not open and my sound card don't work.
Xwindows:
I am a novice. I am using redhat linux 8. It detects my graphics
card
correctly but when i tried to open xwindows, my system hangs.
Sound:
Linux has detected my sound card once but not configured it and
after
that nor it is working nither it is detected by my linux.
GRUB:
Also, i can boot my linux through LILO only. GRUB wont work, it
gives
error "Not enough memory".
I have re-installed linux on my computer but the problem
remains.
All other detailes are follows.
Kernel version:
Linux version 2.4.18-14 (bhcompile@astest.test.redhat.com)
(gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7))
#1 Wed Sep 4 12:13:11 EDT 2002
Commond which triggers the problem:
startx
Processor information:
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(TM) XP 1700+
stepping : 2
cpu MHz : 1469.861
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 2920.57
Module information:
nls_iso8859-1 3516 1 (autoclean)
nls_cp437 5116 1 (autoclean)
vfat 13084 1 (autoclean)
fat 38744 0 (autoclean)
[vfat]
autofs 13348 0 (autoclean) (unused)
ipt_REJECT 3736 2 (autoclean)
iptable_filter 2412 1 (autoclean)
ip_tables 14840 2 [ipt_REJECT iptable_filter]
mousedev 5524 0 (unused)
keybdev 2976 0 (unused)
hid 22244 0 (unused)
input 5888 0 [mousedev keybdev hid]
usb-ohci 21288 0 (unused)
usbcore 77056 1 [hid usb-ohci]
ext3 70400 1
jbd 52212 1 [ext3]
Loaded driver and hardware information:
0000-001f : dma
1
0020-003f : pic
1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic
2
00c0-00df : dma
2
00f0-00ff : fpu
01f0-01f7 : ide
0
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide
0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf
1
5000-500f : PCI device 10de:01b4 (nVidia Corporation)
5100-511f : PCI device 10de:01b4 (nVidia Corporation)
5500-550f : PCI device 10de:01b4 (nVidia Corporation)
a800-a80f : nVidia Corporation nForce IDE
a800-a807 : ide0
a808-a80f : ide1
b000-bfff : PCI Bus #01
b800-b807 : Rockwell International HCF 56k Data/Fax/Voice/Spkp
(w/Handset) Modem
d800-d807 : PCI device 10de:01c3 (nVidia Corporation)
e000-e07f : PCI device 10de:01b1 (nVidia Corporation)
e100-e1ff : PCI device 10de:01b1 (nVidia Corporation)
00000000-0007ffff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-06febfff : System RAM
00100000-00247f2e : Kernel code
00247f2f-0033ed03 : Kernel data
06fec000-06feefff : ACPI Tables
06fef000-06ffefff : reserved
06fff000-06ffffff : ACPI Non-volatile Storage
eb000000-ec7fffff : PCI Bus #02
eb000000-ebffffff : nVidia Corporation GeForce2 Integrated GPU
ec800000-ecffffff : PCI Bus #01
ec800000-ec80ffff : Rockwell International HCF 56k
Data/Fax/Voice/Spkp (w/Handset) Modem
ed000000-ed000fff : PCI device 10de:01b1 (nVidia Corporation)
ed800000-ed87ffff : PCI device 10de:01b0 (nVidia Corporation)
ee000000-ee0003ff : PCI device 10de:01c3 (nVidia Corporation)
ee800000-ee800fff : PCI device 10de:01c2 (nVidia Corporation)
ee800000-ee800fff : usb-ohci
e
f000000-ef000fff : PCI device
10de:01c2 (nVidia Corporation)
ef000000-ef000fff : usb-ohci
e
ff00000-f7ffffff : PCI Bus #02
f0000000-f7ffffff : nVidia Corporation GeForce2 Integrated GPU
f8000000-fbffffff : PCI device
10de:01a4 (nVidia Corporation)
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
PCI information:
00:00.0 Host bridge: nVidia Corporation nForce CPU bridge (rev
b2)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [40] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=x1
Capabilities: [60] #08 [2001]
00:00.1 RAM memory: nVidia Corporation nForce 220/420 Memory
Controller (rev b2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:00.2 RAM memory: nVidia Corporation nForce 220/420 Memory
Controller (rev b2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:00.3 RAM memory: nVidia Corporation: Unknown device 01aa (rev
b2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:01.0 ISA bridge: nVidia Corporation nForce ISA Bridge (rev
c3)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [50] #08 [01e1]
00:01.1 SMBus: nVidia Corporation nForce PCI System Management
(rev c1)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 5000 [size=16]
Region 1: I/O ports at 5500 [size=16]
Region 2: I/O ports at 5100 [size=32]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.0 USB Controller: nVidia Corporation: Unknown device 01c2
(rev c3) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ef000000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:03.0 USB Controller: nVidia Corporation: Unknown device 01c2
(rev c3) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ee800000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 Ethernet controller: nVidia Corporation: Unknown device
01c3 (rev c2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ee000000 (32-bit, non-prefetchable)
[size=1K]
Region 1: I/O ports at d800 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:05.0 Multimedia audio controller: nVidia Corporation: Unknown
device 01b0 (rev c2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 3000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ed800000 (32-bit, non-prefetchable)
[size=512K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.0 Multimedia audio controller: nVidia Corporation nForce
Audio (rev c2)
Subsystem: nVidia Corporation: Unknown device 8384
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e100 [size=256]
Region 1: I/O ports at e000 [size=128]
Region 2: Memory at ed000000 (32-bit, non-prefetchable)
[disabled] [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 PCI bridge: nVidia Corporation nForce PCI-to-PCI bridge
(rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ec800000-ecffffff
Prefetchable memory behind bridge: f8000000-f7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
00:09.0 IDE interface: nVidia Corporation nForce IDE (rev c3)
(prog-if 8a [Master SecP PriP])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 4: I/O ports at a800 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1e.0 PCI bridge: nVidia Corporation nForce AGP to PCI Bridge
(rev b2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000a000-00009fff
Memory behind bridge: eb000000-ec7fffff
Prefetchable memory behind bridge: eff00000-f7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
01:08.0 Communication controller: Rockwell International HCF 56k
Data/Fax/Voice/Spkp (w/Handset) Modem (rev 01)
Subsystem: Rockwell International HCF 56k Data/Fax/Voice/Spkp
(w/Handset) Modem
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ec800000 (32-bit, non-prefetchable)
[size=64K]
Region 1: I/O ports at b800 [size=8]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
02:00.0 VGA compatible controller: nVidia Corporation NV15
[GeForce2 - nForce GPU] (rev b1) (prog-if 00 [VGA])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at eb000000 (32-bit, non-prefetchable)
[size=16M]
Region 1: Memory at f0000000 (32-bit, prefetchable)
[size=128M]
Expansion ROM at efff0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x4
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
XF86Config:
# File generated by anaconda.
Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of
the
# file minus the extension (like ".txt" or ".db"). There is
normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated
together)
# By default, Red Hat 6.0 and later now use a font server
independent of
# the X server to render fonts.
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "dri"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
# Option "AutoRepeat" "500 5"
# when using XQUEUE, comment out the above line, and uncomment
the
# following line
# Option "Protocol" "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with
xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify
the
# lines below (which are the defaults). For example, for a
non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
#Option "XkbVariant" ""
#Option "XkbOptions" ""
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-55
VertRefresh 50-120
Option "dpms"
EndSection
Section "Device"
# no known options
Identifier "NVIDIA GeForce 2 MX (generic)"
Driver "nv"
VendorName "NVIDIA GeForce 2 MX (generic)"
BoardName "NVIDIA GeForce 2 MX (generic)"
#BusID
EndSection
Section "Screen"
Identifier "Screen0"
Device "NVIDIA GeForce 2 MX (generic)"
Monitor "Monitor0"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection
Section "DRI"
Mode 0666
EndSection
cmdline:
auto BOOT_IMAGE=linux ro BOOT_FILE=/boot/vmlinuz-2.4.18-14
root=LABEL=/
dma:
4: cascade
intrrupts:
CPU0
0: 337647 XT-PIC timer
1: 2694 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 0 XT-PIC usb-ohci, usb-ohci
8: 1 XT-PIC rtc
12: 20 XT-PIC PS/2 Mouse
14: 27338 XT-PIC ide0
NMI: 0
ERR: 2
partitions:
major minor #blocks name rio rmerge rsect ruse wio wmerge
wsect wuse running use aveq
3 0 39121488 hda 2567 4181 52107 22201 1417 1941 26952
45880 -2 329576 7788488
3 1 5245191 hda1 9 43 104 109 0 0 0 0 0 109 109
3 2 1 hda2 0 0 0 0 0 0 0 0 0 0 0
3 5 10490413 hda5 9 43 104 95 0 0 0 0 0 95 95
3 6 11695288 hda6 50 43 145 214 7 1 8 95 0 230 310
3 7 8104761 hda7 9 43 104 132 0 0 0 0 0 132 132
3 8 3277228 hda8 2475 3966 51498 21527 1410 1940 26944
45785 0 22394 67314
3 9 305203 hda9 9 25 104 56 0 0 0 0 0 56 56
My e-mail addresses are: linux_guyus@yahoo.com and
linux_guyus@rediff.com
My postel address: 80, Ahilya Nagar Ext. Annapurna Road, Indore,
M.P.,
India. PIN 452009
please answer me soon.
Thanking you.
Saurabh Khanna.
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: your mail
2003-01-31 18:46 saurabh khanna
@ 2003-02-03 12:53 ` Alexander Kellett
0 siblings, 0 replies; 2+ messages in thread
From: Alexander Kellett @ 2003-02-03 12:53 UTC (permalink / raw)
To: saurabh khanna; +Cc: linux-kernel
hiya,
unfortunately this list isn't for such problems and it
would be better to contact your distribution or the various
forums it has. try google.
/me wonders again why this list isn't called linux-kernel-dev@...
Alex
On Fri, Jan 31, 2003 at 06:46:05PM -0000, saurabh khanna wrote:
> Problem: My xwindows did not open and my sound card don't work.
>
> Xwindows:
> I am a novice. I am using redhat linux 8. It detects my graphics
> card
> correctly but when i tried to open xwindows, my system hangs.
>
> Sound:
> Linux has detected my sound card once but not configured it and
> after
> that nor it is working nither it is detected by my linux.
>
> GRUB:
> Also, i can boot my linux through LILO only. GRUB wont work, it
> gives
> error "Not enough memory".
>
> I have re-installed linux on my computer but the problem
> remains.
> All other detailes are follows.
>
> Kernel version:
> Linux version 2.4.18-14 (bhcompile@astest.test.redhat.com)
> (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7))
> #1 Wed Sep 4 12:13:11 EDT 2002
>
>
> Commond which triggers the problem:
> startx
>
> Processor information:
> processor : 0
>
> vendor_id : AuthenticAMD
>
> cpu family : 6
>
> model : 6
>
> model name : AMD Athlon(TM) XP 1700+
>
> stepping : 2
>
> cpu MHz : 1469.861
>
> cache size : 256 KB
>
> fdiv_bug : no
>
> hlt_bug : no
>
> f00f_bug : no
>
> coma_bug : no
>
> fpu : yes
>
> fpu_exception : yes
>
> cpuid level : 1
>
> wp : yes
>
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
> cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
>
> bogomips : 2920.57
>
>
>
> Module information:
> nls_iso8859-1 3516 1 (autoclean)
>
> nls_cp437 5116 1 (autoclean)
>
> vfat 13084 1 (autoclean)
>
> fat 38744 0 (autoclean)
> [vfat]
> autofs 13348 0 (autoclean) (unused)
>
> ipt_REJECT 3736 2 (autoclean)
>
> iptable_filter 2412 1 (autoclean)
>
> ip_tables 14840 2 [ipt_REJECT iptable_filter]
>
> mousedev 5524 0 (unused)
>
> keybdev 2976 0 (unused)
>
> hid 22244 0 (unused)
>
> input 5888 0 [mousedev keybdev hid]
>
> usb-ohci 21288 0 (unused)
>
> usbcore 77056 1 [hid usb-ohci]
>
> ext3 70400 1
>
> jbd 52212 1 [ext3]
>
>
>
> Loaded driver and hardware information:
> 0000-001f : dma
> 1
> 0020-003f : pic
> 1
> 0040-005f : timer
>
> 0060-006f : keyboard
>
> 0070-007f : rtc
>
> 0080-008f : dma page reg
>
> 00a0-00bf : pic
> 2
> 00c0-00df : dma
> 2
> 00f0-00ff : fpu
>
> 01f0-01f7 : ide
> 0
> 02f8-02ff : serial(auto)
>
> 03c0-03df : vga+
>
> 03f6-03f6 : ide
> 0
> 03f8-03ff : serial(auto)
>
> 0cf8-0cff : PCI conf
> 1
> 5000-500f : PCI device 10de:01b4 (nVidia Corporation)
>
> 5100-511f : PCI device 10de:01b4 (nVidia Corporation)
>
> 5500-550f : PCI device 10de:01b4 (nVidia Corporation)
>
> a800-a80f : nVidia Corporation nForce IDE
>
> a800-a807 : ide0
>
> a808-a80f : ide1
>
> b000-bfff : PCI Bus #01
>
> b800-b807 : Rockwell International HCF 56k Data/Fax/Voice/Spkp
> (w/Handset) Modem
>
> d800-d807 : PCI device 10de:01c3 (nVidia Corporation)
>
> e000-e07f : PCI device 10de:01b1 (nVidia Corporation)
>
> e100-e1ff : PCI device 10de:01b1 (nVidia Corporation)
>
> 00000000-0007ffff : System RAM
>
> 0009fc00-0009ffff : reserved
>
> 000a0000-000bffff : Video RAM area
>
> 000c0000-000c7fff : Video ROM
>
> 000f0000-000fffff : System ROM
>
> 00100000-06febfff : System RAM
>
> 00100000-00247f2e : Kernel code
>
> 00247f2f-0033ed03 : Kernel data
>
> 06fec000-06feefff : ACPI Tables
>
> 06fef000-06ffefff : reserved
>
> 06fff000-06ffffff : ACPI Non-volatile Storage
>
> eb000000-ec7fffff : PCI Bus #02
>
> eb000000-ebffffff : nVidia Corporation GeForce2 Integrated GPU
>
> ec800000-ecffffff : PCI Bus #01
>
> ec800000-ec80ffff : Rockwell International HCF 56k
> Data/Fax/Voice/Spkp (w/Handset) Modem
>
> ed000000-ed000fff : PCI device 10de:01b1 (nVidia Corporation)
>
> ed800000-ed87ffff : PCI device 10de:01b0 (nVidia Corporation)
>
> ee000000-ee0003ff : PCI device 10de:01c3 (nVidia Corporation)
>
> ee800000-ee800fff : PCI device 10de:01c2 (nVidia Corporation)
>
> ee800000-ee800fff : usb-ohci
> e
> f000000-ef000fff : PCI device
> 10de:01c2 (nVidia Corporation)
>
> ef000000-ef000fff : usb-ohci
> e
> ff00000-f7ffffff : PCI Bus #02
>
> f0000000-f7ffffff : nVidia Corporation GeForce2 Integrated GPU
>
> f8000000-fbffffff : PCI device
> 10de:01a4 (nVidia Corporation)
>
> fec00000-fec00fff : reserved
>
> fee00000-fee00fff : reserved
>
> ffff0000-ffffffff : reserved
>
>
> PCI information:
> 00:00.0 Host bridge: nVidia Corporation nForce CPU bridge (rev
> b2)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [40] AGP version 2.0
> Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4
> Command: RQ=0 SBA- AGP- 64bit- FW- Rate=x1
> Capabilities: [60] #08 [2001]
>
> 00:00.1 RAM memory: nVidia Corporation nForce 220/420 Memory
> Controller (rev b2)
> Subsystem: nVidia Corporation: Unknown device 0c11
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>
> 00:00.2 RAM memory: nVidia Corporation nForce 220/420 Memory
> Controller (rev b2)
> Subsystem: nVidia Corporation: Unknown device 0c11
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>
> 00:00.3 RAM memory: nVidia Corporation: Unknown device 01aa (rev
> b2)
> Subsystem: nVidia Corporation: Unknown device 0c11
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>
> 00:01.0 ISA bridge: nVidia Corporation nForce ISA Bridge (rev
> c3)
> Subsystem: nVidia Corporation: Unknown device 0c11
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Capabilities: [50] #08 [01e1]
>
> 00:01.1 SMBus: nVidia Corporation nForce PCI System Management
> (rev c1)
> Subsystem: nVidia Corporation: Unknown device 0c11
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin A routed to IRQ 5
> Region 0: I/O ports at 5000 [size=16]
> Region 1: I/O ports at 5500 [size=16]
> Region 2: I/O ports at 5100 [size=32]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:02.0 USB Controller: nVidia Corporation: Unknown device 01c2
> (rev c3) (prog-if 10 [OHCI])
> Subsystem: nVidia Corporation: Unknown device 0c11
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at ef000000 (32-bit, non-prefetchable)
> [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:03.0 USB Controller: nVidia Corporation: Unknown device 01c2
> (rev c3) (prog-if 10 [OHCI])
> Subsystem: nVidia Corporation: Unknown device 0c11
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at ee800000 (32-bit, non-prefetchable)
> [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:04.0 Ethernet controller: nVidia Corporation: Unknown device
> 01c3 (rev c2)
> Subsystem: nVidia Corporation: Unknown device 0c11
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 (250ns min, 5000ns max)
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at ee000000 (32-bit, non-prefetchable)
> [size=1K]
> Region 1: I/O ports at d800 [size=8]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:05.0 Multimedia audio controller: nVidia Corporation: Unknown
> device 01b0 (rev c2)
> Subsystem: nVidia Corporation: Unknown device 0c11
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 (250ns min, 3000ns max)
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at ed800000 (32-bit, non-prefetchable)
> [size=512K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:06.0 Multimedia audio controller: nVidia Corporation nForce
> Audio (rev c2)
> Subsystem: nVidia Corporation: Unknown device 8384
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 (500ns min, 1250ns max)
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at e100 [size=256]
> Region 1: I/O ports at e000 [size=128]
> Region 2: Memory at ed000000 (32-bit, non-prefetchable)
> [disabled] [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:08.0 PCI bridge: nVidia Corporation nForce PCI-to-PCI bridge
> (rev c2) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 0000b000-0000bfff
> Memory behind bridge: ec800000-ecffffff
> Prefetchable memory behind bridge: f8000000-f7ffffff
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>
> 00:09.0 IDE interface: nVidia Corporation nForce IDE (rev c3)
> (prog-if 8a [Master SecP PriP])
> Subsystem: nVidia Corporation: Unknown device 0c11
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 (750ns min, 250ns max)
> Region 4: I/O ports at a800 [size=16]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:1e.0 PCI bridge: nVidia Corporation nForce AGP to PCI Bridge
> (rev b2) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
> I/O behind bridge: 0000a000-00009fff
> Memory behind bridge: eb000000-ec7fffff
> Prefetchable memory behind bridge: eff00000-f7ffffff
> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
>
> 01:08.0 Communication controller: Rockwell International HCF 56k
> Data/Fax/Voice/Spkp (w/Handset) Modem (rev 01)
> Subsystem: Rockwell International HCF 56k Data/Fax/Voice/Spkp
> (w/Handset) Modem
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at ec800000 (32-bit, non-prefetchable)
> [size=64K]
> Region 1: I/O ports at b800 [size=8]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
>
> 02:00.0 VGA compatible controller: nVidia Corporation NV15
> [GeForce2 - nForce GPU] (rev b1) (prog-if 00 [VGA])
> Subsystem: nVidia Corporation: Unknown device 0c11
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (1250ns min, 250ns max)
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at eb000000 (32-bit, non-prefetchable)
> [size=16M]
> Region 1: Memory at f0000000 (32-bit, prefetchable)
> [size=128M]
> Expansion ROM at efff0000 [disabled] [size=64K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [44] AGP version 2.0
> Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x4
> Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
>
>
>
> XF86Config:
>
> # File generated by anaconda.
>
> Section "ServerLayout"
> Identifier "Anaconda Configured"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Mouse1" "SendCoreEvents"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
>
> # The location of the RGB database. Note, this is the name of
> the
> # file minus the extension (like ".txt" or ".db"). There is
> normally
> # no need to change the default.
>
> RgbPath "/usr/X11R6/lib/X11/rgb"
>
> # Multiple FontPath entries are allowed (they are concatenated
> together)
> # By default, Red Hat 6.0 and later now use a font server
> independent of
> # the X server to render fonts.
>
> FontPath "unix/:7100"
>
> EndSection
>
> Section "Module"
> Load "dbe"
> Load "extmod"
> Load "fbdevhw"
> Load "dri"
> Load "glx"
> Load "record"
> Load "freetype"
> Load "type1"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "keyboard"
>
> # Option "AutoRepeat" "500 5"
>
> # when using XQUEUE, comment out the above line, and uncomment
> the
> # following line
> # Option "Protocol" "Xqueue"
>
> # Specify which keyboard LEDs can be user-controlled (eg, with
> xset(1))
> # Option "Xleds" "1 2 3"
>
> # To disable the XKEYBOARD extension, uncomment XkbDisable.
> # Option "XkbDisable"
>
> # To customise the XKB settings to suit your keyboard, modify
> the
> # lines below (which are the defaults). For example, for a
> non-U.S.
> # keyboard, you will probably want to use:
> # Option "XkbModel" "pc102"
> # If you have a US Microsoft Natural keyboard, you can use:
> # Option "XkbModel" "microsoft"
> #
> # Then to change the language, change the Layout setting.
> # For example, a german layout can be obtained with:
> # Option "XkbLayout" "de"
> # or:
> # Option "XkbLayout" "de"
> # Option "XkbVariant" "nodeadkeys"
> #
> # If you'd like to switch the positions of your capslock and
> # control keys, use:
> # Option "XkbOptions" "ctrl:swapcaps"
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "us"
> #Option "XkbVariant" ""
> #Option "XkbOptions" ""
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "PS/2"
> Option "Device" "/dev/psaux"
> Option "ZAxisMapping" "4 5"
> Option "Emulate3Buttons" "yes"
> EndSection
>
>
> Section "InputDevice"
> Identifier "Mouse1"
> Driver "mouse"
> Option "Device" "/dev/input/mice"
> Option "Protocol" "IMPS/2"
> Option "Emulate3Buttons" "no"
> Option "ZAxisMapping" "4 5"
> EndSection
>
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "Monitor Model"
> HorizSync 30-55
> VertRefresh 50-120
> Option "dpms"
>
>
> EndSection
>
> Section "Device"
> # no known options
> Identifier "NVIDIA GeForce 2 MX (generic)"
> Driver "nv"
> VendorName "NVIDIA GeForce 2 MX (generic)"
> BoardName "NVIDIA GeForce 2 MX (generic)"
>
> #BusID
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "NVIDIA GeForce 2 MX (generic)"
> Monitor "Monitor0"
> DefaultDepth 16
>
> Subsection "Display"
> Depth 16
> Modes "1024x768" "800x600" "640x480"
> EndSubsection
>
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
>
> cmdline:
> auto BOOT_IMAGE=linux ro BOOT_FILE=/boot/vmlinuz-2.4.18-14
> root=LABEL=/
>
>
> dma:
> 4: cascade
>
>
> intrrupts:
> CPU0
> 0: 337647 XT-PIC timer
> 1: 2694 XT-PIC keyboard
> 2: 0 XT-PIC cascade
> 5: 0 XT-PIC usb-ohci, usb-ohci
> 8: 1 XT-PIC rtc
> 12: 20 XT-PIC PS/2 Mouse
> 14: 27338 XT-PIC ide0
> NMI: 0
> ERR: 2
>
>
> partitions:
> major minor #blocks name rio rmerge rsect ruse wio wmerge
> wsect wuse running use aveq
>
> 3 0 39121488 hda 2567 4181 52107 22201 1417 1941 26952
> 45880 -2 329576 7788488
> 3 1 5245191 hda1 9 43 104 109 0 0 0 0 0 109 109
> 3 2 1 hda2 0 0 0 0 0 0 0 0 0 0 0
> 3 5 10490413 hda5 9 43 104 95 0 0 0 0 0 95 95
> 3 6 11695288 hda6 50 43 145 214 7 1 8 95 0 230 310
> 3 7 8104761 hda7 9 43 104 132 0 0 0 0 0 132 132
> 3 8 3277228 hda8 2475 3966 51498 21527 1410 1940 26944
> 45785 0 22394 67314
> 3 9 305203 hda9 9 25 104 56 0 0 0 0 0 56 56
>
>
>
> My e-mail addresses are: linux_guyus@yahoo.com and
> linux_guyus@rediff.com
> My postel address: 80, Ahilya Nagar Ext. Annapurna Road, Indore,
> M.P.,
> India. PIN 452009
> please answer me soon.
> Thanking you.
> Saurabh Khanna.
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
mvg,
Alex
--
"[...] Konqueror open source project. Weighing in at less than
one tenth the size of another open source renderer"
Apple, Jan 2003 (http://www.apple.com/safari/)
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-02-03 13:46 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-01-31 18:46 saurabh khanna
2003-02-03 12:53 ` your mail Alexander Kellett
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.