* [patch] Mips64 Ocelot-C and Jaguar ATX platform support
@ 2003-07-23 22:27 Louis Hamilton
2003-07-28 19:05 ` William Jhun
2003-07-30 1:30 ` Ralf Baechle
0 siblings, 2 replies; 5+ messages in thread
From: Louis Hamilton @ 2003-07-23 22:27 UTC (permalink / raw)
To: ralf; +Cc: linux-mips
[-- Attachment #1: Type: text/plain, Size: 658 bytes --]
Ralf,
Here is 64-bit support for both the RM7000-based Ocelot-C and
RM9000-based Jaguar ATX platforms.
Since the port was 2.4.21 based, this patch submission is for the 2.4 tree.
This patch supersedes the Ocelot-C patch I sent earlier, since it
encompasses both platforms.
Notes the board support lives under arch/mips/momentum.
Also, CONFIG_BOARD_SCACHE and CONFIG_RM7000_CPU_SCACHE are utilized and
integrated into each platform's default configuration files.
As in the first patch, drivers/net/mv64340_eth.{c,h} is added to provide
ethernet support.
If it looks ok, please check changes into the tree.
Regards,
Louis
Louis Hamilton
Red Hat, Inc.
[-- Attachment #2: ocelotc-jaguar-patchlist --]
[-- Type: text/plain, Size: 1493 bytes --]
`arch/mips/config-shared.in'
`arch/mips/momentum/jaguar_atx/dbg_io.c'
`arch/mips/momentum/jaguar_atx/int-handler.S'
`arch/mips/momentum/jaguar_atx/irq.c'
`arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h'
`arch/mips/momentum/jaguar_atx/Makefile'
`arch/mips/momentum/jaguar_atx/mv-irq.c'
`arch/mips/momentum/jaguar_atx/pci.c'
`arch/mips/momentum/jaguar_atx/pci-irq.c'
`arch/mips/momentum/jaguar_atx/prom.c'
`arch/mips/momentum/jaguar_atx/reset.c'
`arch/mips/momentum/jaguar_atx/setup.c'
`arch/mips/momentum/ocelot_c/ocelot_c_fpga.h'
`arch/mips/momentum/ocelot_c/prom.c'
`arch/mips/momentum/ocelot_c/reset.c'
`arch/mips/momentum/ocelot_c/setup.c'
`arch/mips64/defconfig-jaguar'
`arch/mips64/defconfig-ocelotc'
`arch/mips64/kernel/cpu-probe.c'
`arch/mips64/kernel/pci-dma.c'
`arch/mips64/kernel/proc.c'
`arch/mips64/kernel/setup.c'
`arch/mips64/Makefile'
`arch/mips64/mm/c-r4k.c'
`arch/mips64/mm/loadmmu.c'
`arch/mips64/mm/Makefile'
`arch/mips64/mm/sc-rm7k.c'
`arch/mips64/mm/tlbex-r4k.S'
`arch/mips64/mm/tlb-r4k.c'
`drivers/char/serial.c'
`drivers/net/Config.in'
`drivers/net/Makefile'
`drivers/net/mv64340_eth.c'
`drivers/net/mv64340_eth.h'
`drivers/scsi/scsi_merge.c'
`include/asm-mips64/addrspace.h'
`include/asm-mips64/bootinfo.h'
`include/asm-mips64/cpu.h'
`include/asm-mips64/io.h'
`include/asm-mips64/mipsregs.h'
`include/asm-mips64/page.h'
`include/asm-mips64/serial.h'
`net/core/skbuff.c'
43 files
[-- Attachment #3: mips64-ocelotc-jaguar-patch.gz --]
[-- Type: application/x-gzip, Size: 48260 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [patch] Mips64 Ocelot-C and Jaguar ATX platform support
@ 2003-07-28 19:05 ` William Jhun
0 siblings, 0 replies; 5+ messages in thread
From: William Jhun @ 2003-07-28 19:05 UTC (permalink / raw)
To: Louis Hamilton; +Cc: ralf, linux-mips
Louis,
Using Ralf's pre-packaged mips64 gcc 2.95.4 / binutils 2.13.2.1 .rpm, I
wasn't able to get this to build without having CPU-specific gcc opts
(patch below, please verify what flags are appropriate). Also, shouldn't
define_bool CONFIG_BOOT_ELF32 y
be in the config-shared.in in the jaguar section? I cannot link
otherwise...
At this point (with latest linux_2_4 tree), I can boot the kernel but get
a hang after mounting NFS root via the gt64340 eth0. If I can find a
serial cable for the second port, I might try to step with kgdb...
Thanks,
Will
Index: arch/mips64/Makefile
===================================================================
RCS file: /home/cvs/linux/arch/mips64/Makefile,v
retrieving revision 1.22.2.34
diff -U3 -r1.22.2.34 Makefile
--- arch/mips64/Makefile 5 Jul 2003 13:17:04 -0000 1.22.2.34
+++ arch/mips64/Makefile 28 Jul 2003 18:37:47 -0000
@@ -79,6 +79,9 @@
#CFLAGS += -mips64 # Should be used then we get a
MIPS64 compiler
CFLAGS += -mcpu=r8000 -mips4
endif
+ifdef CONFIG_CPU_RM9000
+GCCFLAGS += -mcpu=r8000 -mips4
+endif
#
# We unconditionally build the math emulator
On Wed, 23 Jul 2003, Louis Hamilton wrote:
> Ralf,
>
> Here is 64-bit support for both the RM7000-based Ocelot-C and
> RM9000-based Jaguar ATX platforms.
> Since the port was 2.4.21 based, this patch submission is for the 2.4 tree.
> This patch supersedes the Ocelot-C patch I sent earlier, since it
> encompasses both platforms.
>
> Notes the board support lives under arch/mips/momentum.
> Also, CONFIG_BOARD_SCACHE and CONFIG_RM7000_CPU_SCACHE are utilized and
> integrated into each platform's default configuration files.
> As in the first patch, drivers/net/mv64340_eth.{c,h} is added to provide
> ethernet support.
>
> If it looks ok, please check changes into the tree.
>
> Regards,
> Louis
>
> Louis Hamilton
> Red Hat, Inc.
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [patch] Mips64 Ocelot-C and Jaguar ATX platform support
@ 2003-07-28 19:05 ` William Jhun
0 siblings, 0 replies; 5+ messages in thread
From: William Jhun @ 2003-07-28 19:05 UTC (permalink / raw)
To: Louis Hamilton; +Cc: ralf, linux-mips
Louis,
Using Ralf's pre-packaged mips64 gcc 2.95.4 / binutils 2.13.2.1 .rpm, I
wasn't able to get this to build without having CPU-specific gcc opts
(patch below, please verify what flags are appropriate). Also, shouldn't
define_bool CONFIG_BOOT_ELF32 y
be in the config-shared.in in the jaguar section? I cannot link
otherwise...
At this point (with latest linux_2_4 tree), I can boot the kernel but get
a hang after mounting NFS root via the gt64340 eth0. If I can find a
serial cable for the second port, I might try to step with kgdb...
Thanks,
Will
Index: arch/mips64/Makefile
===================================================================
RCS file: /home/cvs/linux/arch/mips64/Makefile,v
retrieving revision 1.22.2.34
diff -U3 -r1.22.2.34 Makefile
--- arch/mips64/Makefile 5 Jul 2003 13:17:04 -0000 1.22.2.34
+++ arch/mips64/Makefile 28 Jul 2003 18:37:47 -0000
@@ -79,6 +79,9 @@
#CFLAGS += -mips64 # Should be used then we get a
MIPS64 compiler
CFLAGS += -mcpu=r8000 -mips4
endif
+ifdef CONFIG_CPU_RM9000
+GCCFLAGS += -mcpu=r8000 -mips4
+endif
#
# We unconditionally build the math emulator
On Wed, 23 Jul 2003, Louis Hamilton wrote:
> Ralf,
>
> Here is 64-bit support for both the RM7000-based Ocelot-C and
> RM9000-based Jaguar ATX platforms.
> Since the port was 2.4.21 based, this patch submission is for the 2.4 tree.
> This patch supersedes the Ocelot-C patch I sent earlier, since it
> encompasses both platforms.
>
> Notes the board support lives under arch/mips/momentum.
> Also, CONFIG_BOARD_SCACHE and CONFIG_RM7000_CPU_SCACHE are utilized and
> integrated into each platform's default configuration files.
> As in the first patch, drivers/net/mv64340_eth.{c,h} is added to provide
> ethernet support.
>
> If it looks ok, please check changes into the tree.
>
> Regards,
> Louis
>
> Louis Hamilton
> Red Hat, Inc.
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [patch] Mips64 Ocelot-C and Jaguar ATX platform support
2003-07-28 19:05 ` William Jhun
(?)
@ 2003-07-28 20:20 ` Louis Hamilton
-1 siblings, 0 replies; 5+ messages in thread
From: Louis Hamilton @ 2003-07-28 20:20 UTC (permalink / raw)
To: William Jhun; +Cc: linux-mips
Will,
William Jhun wrote:
>Louis,
>
>Using Ralf's pre-packaged mips64 gcc 2.95.4 / binutils 2.13.2.1 .rpm, I
>wasn't able to get this to build without having CPU-specific gcc opts
>(patch below, please verify what flags are appropriate). Also, shouldn't
>
Arggh.. my (different) build environment meant messing with options in my
arch/mips64/Makefile (like using "-march=rm9000" instead of
"-mcpu=r8000 -mips4").
The CFLAGS change below looks fine.
Btw, an ifdef for CONFIG_CPU_RM7000 will be required too, using the
same CFLAGS options as the rm9000.
>
>define_bool CONFIG_BOOT_ELF32 y
>
>be in the config-shared.in in the jaguar section?
>
yes
>
>
>At this point (with latest linux_2_4 tree), I can boot the kernel but get
>a hang after mounting NFS root via the gt64340 eth0. If I can find a
>serial cable for the second port, I might try to step with kgdb...
>
>Thanks,
>Will
>
thanks
>
>Index: arch/mips64/Makefile
>===================================================================
>RCS file: /home/cvs/linux/arch/mips64/Makefile,v
>retrieving revision 1.22.2.34
>diff -U3 -r1.22.2.34 Makefile
>--- arch/mips64/Makefile 5 Jul 2003 13:17:04 -0000 1.22.2.34
>+++ arch/mips64/Makefile 28 Jul 2003 18:37:47 -0000
>@@ -79,6 +79,9 @@
> #CFLAGS += -mips64 # Should be used then we get a
>MIPS64 compiler
> CFLAGS += -mcpu=r8000 -mips4
> endif
>+ifdef CONFIG_CPU_RM9000
>+GCCFLAGS += -mcpu=r8000 -mips4
>+endif
>
> #
> # We unconditionally build the math emulator
>
>On Wed, 23 Jul 2003, Louis Hamilton wrote:
>
>>Ralf,
>>
>>Here is 64-bit support for both the RM7000-based Ocelot-C and
>>RM9000-based Jaguar ATX platforms.
>>Since the port was 2.4.21 based, this patch submission is for the 2.4 tree.
>>This patch supersedes the Ocelot-C patch I sent earlier, since it
>>encompasses both platforms.
>>
>>Notes the board support lives under arch/mips/momentum.
>>Also, CONFIG_BOARD_SCACHE and CONFIG_RM7000_CPU_SCACHE are utilized and
>>integrated into each platform's default configuration files.
>>As in the first patch, drivers/net/mv64340_eth.{c,h} is added to provide
>>ethernet support.
>>
>>If it looks ok, please check changes into the tree.
>>
>>Regards,
>>Louis
>>
>>Louis Hamilton
>>Red Hat, Inc.
>>
>>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [patch] Mips64 Ocelot-C and Jaguar ATX platform support
2003-07-23 22:27 [patch] Mips64 Ocelot-C and Jaguar ATX platform support Louis Hamilton
2003-07-28 19:05 ` William Jhun
@ 2003-07-30 1:30 ` Ralf Baechle
1 sibling, 0 replies; 5+ messages in thread
From: Ralf Baechle @ 2003-07-30 1:30 UTC (permalink / raw)
To: Louis Hamilton; +Cc: linux-mips
On Wed, Jul 23, 2003 at 05:27:40PM -0500, Louis Hamilton wrote:
> Notes the board support lives under arch/mips/momentum.
> Also, CONFIG_BOARD_SCACHE and CONFIG_RM7000_CPU_SCACHE are utilized and
> integrated into each platform's default configuration files.
> As in the first patch, drivers/net/mv64340_eth.{c,h} is added to provide
> ethernet support.
>
> If it looks ok, please check changes into the tree.
Ehhh, sorry. This CONFIG_JAGUAR_DMALOW thing just isn't the way to go.
I know the Jaguar's DMA architecture is unpleassant to say the least but
still, cluttering generic code with ifdefs isn't the way to go. Declare
all memory above the DMA limit high-memory and put the rest into ZONE_DMA
rsp. ZONE_NORMAL, as appropriate for the Jaguar. Then provide a dummy
implementation of kmap, kunmap etc. (unless you have "real" highmem of
course) that does the same thing as if highmem was disabled, see
<linux/highmem.h>.
Ralf
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2003-07-30 1:30 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-07-23 22:27 [patch] Mips64 Ocelot-C and Jaguar ATX platform support Louis Hamilton
2003-07-28 19:05 ` William Jhun
2003-07-28 19:05 ` William Jhun
2003-07-28 20:20 ` Louis Hamilton
2003-07-30 1:30 ` Ralf Baechle
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.