* Apparent Scheduler problem when using nforce based mobos - kernel 2.6.0-test7-bk2
@ 2003-10-11 13:47 Guy
0 siblings, 0 replies; only message in thread
From: Guy @ 2003-10-11 13:47 UTC (permalink / raw)
To: linux-kernel
1. Apparent Scheduler problem when using nforce based mobos
2. When running any version of the 2.6.0 kernel, the computer is
subject to freezing when xmms and any acceserated graphics are
occuring at the same time. Symptoms include sound skipping and
screen freezes. If allowed to go long enough, the computer
freezes solid and I am unable to even ssh in.
3. Scheduler Sound OpenGL Alsa Nforce
4. Linux version 2.6.0-test7-bk2
(root@fierywyrme.lamasondufeu.com) (gcc version 3.3.1 20030916
(Gentoo Linux 3.3.1-r4, propolice)) #1 Sat Oct 11 00:08:39 EDT
2003
5. unavailable
6. not applicable
7.1 Linux fierywyrme.lamasondufeu.com 2.6.0-test7-bk2 #1 Sat Oct
11 00:08:39 EDT 2003 i686 AMD Athlon(TM) XP 1900+ AuthenticAMD
GNU/Linux
Gnu C 3.3.1
Gnu make 3.80
util-linux 2.12
mount 2.12
module-init-tools 0.9.15-pre1
e2fsprogs 1.34
jfsutils 1.1.3
xfsprogs 2.3.9
PPP 2.4.1
nfs-utils 1.0.6
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.1.13
Net-tools 1.60
Kbd 1.08
Sh-utils 5.0.91
Modules Loaded snd_pcm_oss snd_mixer_oss nvidia parport_pc
lp parport w83781d i2c_sensor i2c_amd756 i2c_dev i2c_core
snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd_page_alloc
snd_mpu401_uart snd_rawmidi snd_seq_device smbfs ide_scsi 8139too
mii
7.2processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(TM) XP 1900+
stepping : 2
cpu MHz : 1603.440
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext
3dnow
bogomips : 3162.11
7.3 snd_pcm_oss 52516 - - Live 0xf8db9000
snd_mixer_oss 18528 - - Live 0xf8da2000
nvidia 1700876 - - Live 0xf8e9c000
parport_pc 40700 - - Live 0xf8cc0000
lp 10592 - - Live 0xf8c9d000
parport 42984 - - Live 0xf8ca6000
w83781d 35296 - - Live 0xf89e1000
i2c_sensor 2688 - - Live 0xf8955000
i2c_amd756 5476 - - Live 0xf899e000
i2c_dev 10080 - - Live 0xf899a000
i2c_core 24296 - - Live 0xf89a3000
snd_intel8x0 31684 - - Live 0xf8989000
snd_ac97_codec 53956 - - Live 0xf89d2000
snd_pcm 98724 - - Live 0xf89b8000
snd_timer 24836 - - Live 0xf8992000
snd_page_alloc 11524 - - Live 0xf8966000
snd_mpu401_uart 7552 - - Live 0xf8963000
snd_rawmidi 24576 - - Live 0xf896c000
snd_seq_device 7848 - - Live 0xf8949000
smbfs 68056 - - Live 0xf8977000
ide_scsi 14752 - - Live 0xf895e000
8139too 22688 - - Live 0xf8957000
mii 4800 - - Live 0xf894c000
7.4 0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
5000-500f : 0000:00:01.1
5100-511f : 0000:00:01.1
5500-550f : 0000:00:01.1
5500-550f : amd756-smbus
9800-980f : 0000:00:09.0
9800-9807 : ide0
9808-980f : ide1
a000-bfff : PCI Bus #01
a000-a00f : 0000:01:07.0
a000-a007 : ide2
a008-a00f : ide3
a400-a403 : 0000:01:07.0
a402-a402 : ide3
a800-a807 : 0000:01:07.0
a800-a807 : ide3
b000-b003 : 0000:01:07.0
b002-b002 : ide2
b400-b407 : 0000:01:07.0
b400-b407 : ide2
b800-b8ff : 0000:01:06.0
b800-b8ff : 8139too
d800-d807 : 0000:00:04.0
e000-e07f : 0000:00:06.0
e000-e03f : NVidia nForce - Controller
e100-e1ff : 0000:00:06.0
00000000-0007ffff : System RAM
0009e800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000d0000-000d27ff : Extension ROM
000f0000-000fffff : System ROM
00100000-3dfebfff : System RAM
00100000-0038e4ca : Kernel code
0038e4cb-004684ff : Kernel data
3dfec000-3dfeefff : ACPI Tables
3dfef000-3dffefff : reserved
3dfff000-3dffffff : ACPI Non-volatile Storage
db000000-dbffffff : PCI Bus #02
db000000-dbffffff : 0000:02:00.0
dc000000-dcffffff : PCI Bus #01
dc000000-dc003fff : 0000:01:07.0
dc800000-dc8000ff : 0000:01:06.0
dc800000-dc8000ff : 8139too
dd000000-dd000fff : 0000:00:06.0
dd000000-dd0001ff : NVidia nForce - AC'97
dd800000-dd87ffff : 0000:00:05.0
de000000-de0003ff : 0000:00:04.0
de800000-de800fff : 0000:00:03.0
df000000-df000fff : 0000:00:02.0
dff00000-efefffff : PCI Bus #02
e0000000-e7ffffff : 0000:02:00.0
eff00000-efffffff : PCI Bus #01
f0000000-f7ffffff : 0000:00:00.0
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
7.5 00:00.0 Host bridge: nVidia Corporation nForce CPU bridge (rev
b2)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable)
[size=128M]
Capabilities: [40] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh-
GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64-
64bit- FW- Rate=x4
Capabilities: [60] #08 [2001]
00:00.1 RAM memory: nVidia Corporation nForce 220/420 Memory
Controller (rev b2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.2 RAM memory: nVidia Corporation nForce 220/420 Memory
Controller (rev b2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.3 RAM memory: nVidia Corporation: Unknown device 01aa (rev
b2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:01.0 ISA bridge: nVidia Corporation nForce ISA Bridge (rev c3)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [50] #08 [01e1]
00:01.1 SMBus: nVidia Corporation nForce PCI System Management
(rev c1)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 5000 [size=16]
Region 1: I/O ports at 5500 [size=16]
Region 2: I/O ports at 5100 [size=32]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.0 USB Controller: nVidia Corporation nForce USB Controller
(rev c3) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 26
Region 0: Memory at df000000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0
+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:03.0 USB Controller: nVidia Corporation nForce USB Controller
(rev c3) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 26
Region 0: Memory at de800000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0
+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 Ethernet controller: nVidia Corporation nForce Ethernet
Controller (rev c2)
Subsystem: Asustek Computer, Inc.: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 26
Region 0: Memory at de000000 (32-bit, non-prefetchable)
[size=1K]
Region 1: I/O ports at d800 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0
+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:05.0 Multimedia audio controller: nVidia Corporation: Unknown
device 01b0 (rev c2)
Subsystem: Asustek Computer, Inc.: Unknown device 0c11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 3000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at dd800000 (32-bit, non-prefetchable)
[size=512K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.0 Multimedia audio controller: nVidia Corporation nForce
Audio (rev c2)
Subsystem: Asustek Computer, Inc.: Unknown device 8384
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at e100 [size=256]
Region 1: I/O ports at e000 [size=128]
Region 2: Memory at dd000000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 PCI bridge: nVidia Corporation nForce PCI-to-PCI bridge
(rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01,
sec-latency=0
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: dc000000-dcffffff
Prefetchable memory behind bridge: eff00000-efffffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset-
FastB2B-
00:09.0 IDE interface: nVidia Corporation nForce IDE (rev c3)
(prog-if 8a [Master SecP PriP])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 4: I/O ports at 9800 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1e.0 PCI bridge: nVidia Corporation nForce AGP to PCI Bridge
(rev b2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02,
sec-latency=64
I/O behind bridge: 00009000-00008fff
Memory behind bridge: db000000-dbffffff
Prefetchable memory behind bridge: dff00000-efefffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset-
FastB2B-
01:06.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet
(rev 10)
Subsystem: D-Link System Inc DFE-530TX+ 10/100 Ethernet
Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 96 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at b800 [size=256]
Region 1: Memory at dc800000 (32-bit, non-prefetchable)
[size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:07.0 Unknown mass storage controller: Promise Technology, Inc.
20269 (rev 02) (prog-if 85)
Subsystem: Promise Technology, Inc. Ultra133TX2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 96 (1000ns min, 4500ns max), cache line size 08
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at b400 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a400 [size=4]
Region 4: I/O ports at a000 [size=16]
Region 5: Memory at dc000000 (32-bit, non-prefetchable)
[size=16K]
Expansion ROM at <unassigned> [disabled] [size=16K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.0 VGA compatible controller: nVidia Corporation NV15
[GeForce2 - nForce GPU] (rev b1) (prog-if 00 [VGA])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 27
Region 0: Memory at db000000 (32-bit, non-prefetchable)
[size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable)
[size=128M]
Expansion ROM at dfff0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh-
GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64-
64bit- FW- Rate=x4
7.6 Attatched devices:
7.7
# cat /proc/interrupts
CPU0
0: 4046067 XT-PIC timer
1: 7061 IO-APIC-edge i8042
2: 0 XT-PIC cascade
8: 2 IO-APIC-edge rtc
9: 0 IO-APIC-level acpi
12: 94716 IO-APIC-edge i8042
14: 13638 IO-APIC-edge ide0
15: 32 IO-APIC-edge ide1
19: 4473 IO-APIC-level eth0
20: 2341 IO-APIC-level ide2, ide3
27: 250601 IO-APIC-level NVidia nForce, nvidia
NMI: 0
LOC: 4045810
ERR: 0
MIS: 0
# dmidecode 1.8
PCI Interrupt Routing 1.0 present.
Table Size: 192 bytes
Router ID: 00:01.0
Exclusive IRQs: None
Compatible Router: 10de:01b2
BIOS32 Service Directory present.
Calling Interface Address: 0x000F1940
SMBIOS 2.3 present.
DMI 2.3 present.
40 structures occupying 1195 bytes.
DMI table at 0x000F3B30.
Handle 0x0000
DMI type 0, 20 bytes.
BIOS Information Block
Vendor: Award Software, Inc.
Version: ASUS A7N266-VM ACPI BIOS Rev 1007
Release: 08/12/2003
BIOS base: 0xF0000
ROM size: 256K
Capabilities:
Flags: 0x000000007FCBDA80
Handle 0x0001
DMI type 1, 25 bytes.
System Information Block
Vendor: System Manufacturer
Product: System Name
Version: System Version
Serial Number: SYS-1234567890
Handle 0x0002
DMI type 2, 8 bytes.
Board Information Block
Vendor: ASUSTeK Computer INC.
Product: A7N266VM
Version: REV 1.xx
Serial Number: xxxxxxxxxxx
Handle 0x0003
DMI type 3, 17 bytes.
Chassis Information Block
Vendor: Chassis Manufacture
Chassis Type: Tower
Version: Chassis Version
Serial Number: Chassis Serial Number
Asset Tag: Asset-1234567890
Handle 0x0004
DMI type 4, 32 bytes.
Processor
Socket Designation: SOCKET A
Processor Type: Central Processor
Processor Family: Other
Processor Manufacturer: AuthenticAMD
Processor Version: AMD Athlon(TM) XP Processor
Handle 0x0005
DMI type 5, 20 bytes.
Memory Controller
Handle 0x0006
DMI type 6, 12 bytes.
Memory Bank
Socket: DIMM 1
Banks: 0 1
Type:
Installed Size: 512Mbyte
Enabled Size: 512Mbyte
Handle 0x0007
DMI type 6, 12 bytes.
Memory Bank
Socket: DIMM 2
Banks: 2 3
Type:
Installed Size: 512Mbyte
Enabled Size: 512Mbyte
Handle 0x0008
DMI type 7, 19 bytes.
Cache
Socket: L1 Cache
L1 Internal Cache: write-back
L1 Cache Size: 128K
L1 Cache Maximum: 128K
L1 Cache Type: Synchronous
Handle 0x0009
DMI type 7, 19 bytes.
Cache
Socket: L2 Cache
L2 Internal Cache: write-back
L2 Cache Size: 384K
L2 Cache Maximum: 8192K
L2 Cache Type: Pipeline burst Synchronous
Handle 0x000A
DMI type 8, 9 bytes.
Port Connector
Internal Designator: PRIMARY IDE/HDD
Internal Connector Type: On Board IDE
External Designator:
External Connector Type: None
Port Type: None
Handle 0x000B
DMI type 8, 9 bytes.
Port Connector
Internal Designator: SECONDARY IDE/HDD
Internal Connector Type: On Board IDE
External Designator:
External Connector Type: None
Port Type: None
Handle 0x000C
DMI type 8, 9 bytes.
Port Connector
Internal Designator: FLOPPY
Internal Connector Type: On Board Floppy
External Designator:
External Connector Type: None
Port Type: None
Handle 0x000D
DMI type 8, 9 bytes.
Port Connector
Internal Designator:
Internal Connector Type: None
External Designator: LAN-00E018EDF4FFR
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x000E
DMI type 8, 9 bytes.
Port Connector
Internal Designator:
Internal Connector Type: None
External Designator: USB1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000F
DMI type 8, 9 bytes.
Port Connector
Internal Designator:
Internal Connector Type: None
External Designator: USB2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0010
DMI type 8, 9 bytes.
Port Connector
Internal Designator:
Internal Connector Type: None
External Designator: PS/2 Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0011
DMI type 8, 9 bytes.
Port Connector
Internal Designator:
Internal Connector Type: None
External Designator: PS/2 Mouse
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0012
DMI type 8, 9 bytes.
Port Connector
Internal Designator:
Internal Connector Type: None
External Designator: Parallel Port
External Connector Type: DB-25 pin female
Port Type: Parallel Port ECP/EPP
Handle 0x0013
DMI type 8, 9 bytes.
Port Connector
Internal Designator:
Internal Connector Type: None
External Designator: Serial Port 1
External Connector Type: DB-9 pin male
Port Type: Serial Port 16550 Compatible
Handle 0x0014
DMI type 8, 9 bytes.
Port Connector
Internal Designator:
Internal Connector Type: None
External Designator: Serial Port 2
External Connector Type: DB-9 pin male
Port Type: Serial Port 16550 Compatible
Handle 0x0015
DMI type 8, 9 bytes.
Port Connector
Internal Designator:
Internal Connector Type: None
External Designator: Joystick Port
External Connector Type: DB-15 pin female
Port Type: Joy Stick Port
Handle 0x0016
DMI type 8, 9 bytes.
Port Connector
Internal Designator:
Internal Connector Type: None
External Designator: MIDI Port
External Connector Type: DB-15 pin female
Port Type: MIDI Port
Handle 0x0017
DMI type 8, 9 bytes.
Port Connector
Internal Designator:
Internal Connector Type: None
External Designator: Video Port
External Connector Type: Mini-jack (headphones)
Port Type: Video Port
Handle 0x0018
DMI type 9, 13 bytes.
Card Slot
Slot: PCI 1
Type: 32bit Short PCI
Status: In use.
Slot Features: 5v 3.3v
Handle 0x0019
DMI type 9, 13 bytes.
Card Slot
Slot: PCI 2
Type: 32bit Short PCI
Status: In use.
Slot Features: 5v 3.3v
Handle 0x001A
DMI type 9, 13 bytes.
Card Slot
Slot: PCI 3
Type: 32bit Short PCI
Status: Available.
Slot Features: 5v 3.3v
Handle 0x001B
DMI type 9, 13 bytes.
Card Slot
Slot: AGP
Type: 32bit Short AGP 4x
Status: Available.
Slot Features: 3.3v
Handle 0x001C
DMI type 11, 5 bytes.
OEM Data
0
0
Handle 0x001D
DMI type 13, 22 bytes.
BIOS Language Information
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x001E
DMI type 14, 14 bytes.
Group Associations
Group Name: Cpu Module
Type: 0x04
Handle: 0x0004
Group Name: Cpu Module
Type: 0x07
Handle: 0x0008
Group Name: Cpu Module
Type: 0x07
Handle: 0x0009
Handle 0x001F
DMI type 14, 23 bytes.
Group Associations
Group Name: Memory Module Set
Type: 0x10
Handle: 0x0020
Group Name: Memory Module Set
Type: 0x11
Handle: 0x0021
Group Name: Memory Module Set
Type: 0x14
Handle: 0x0024
Group Name: Memory Module Set
Type: 0x11
Handle: 0x0022
Group Name: Memory Module Set
Type: 0x14
Handle: 0x0025
Group Name: Memory Module Set
Type: 0x13
Handle: 0x0023
Handle 0x0020
DMI type 16, 15 bytes.
Physical Memory Array
Location: System board or motherboard
Use: System memory
Error Correction Type: None
Maximum Capacity: 524288 kB
Error Information Handle: Not Provided
Number of Devices: 2
Handle 0x0021
DMI type 17, 23 bytes.
Memory Device
Array Handle: 0x0020
Error Information Handle: None
Total Width: 72 bits
Data Width: 64 bits
Size: 512 Mbyte
Form Factor: DIMM
Set: 0x01
Locator: DIMM 1
Bank Locator:
Type: DRAM
Type Detail: Synchronous
Speed: Unknown
Handle 0x0022
DMI type 17, 23 bytes.
Memory Device
Array Handle: 0x0020
Error Information Handle: None
Total Width: 72 bits
Data Width: 64 bits
Size: 512 Mbyte
Form Factor: DIMM
Set: 0x02
Locator: DIMM 2
Bank Locator:
Type: DRAM
Type Detail: Synchronous
Speed: Unknown
Handle 0x0023
DMI type 19, 15 bytes.
Memory Array Mapped Address
Handle 0x0024
DMI type 20, 19 bytes.
Memory Device Mapped Address
Handle 0x0025
DMI type 20, 19 bytes.
Memory Device Mapped Address
Handle 0x0026
DMI type 32, 11 bytes.
System Boot Information
Handle 0x0027
DMI type 127, 4 bytes.
End-of-Table
ACPI 1.0 present.
OEM ID: ASUS
RSD table at 0x3DFEC000.
PNP 1.0 present.
Event Notification: Not Supported
Real Mode Code Address: F000:C080
Real Mode Data Address: F000:0000
Protected Mode Code Address: 0x000FC060
Protected Mode Data Address: 0x000F0000
OEM Device Identifier: 0x000CD041
# emerge info
Portage 2.0.49-r10 (default-x86-1.4, gcc-3.3.1, glibc-2.3.2-r1,
2.6.0-test7-bk2)
=================================================================
System uname: 2.6.0-test7-bk2 i686 AMD Athlon(TM) XP 1900+
Gentoo Base System version 1.4.3.10p1
distcc 2.11.1 i686-pc-linux-gnu (protocols 1 and 2) (default port
3632) [disabled]
ACCEPT_KEYWORDS="x86 ~x86"
AUTOCLEAN="yes"
CFLAGS="-march=athlon-xp -Os -pipe"
CHOST="i686-pc-linux-gnu"
COMPILER="gcc3"
CONFIG_PROTECT="/etc /var/qmail/control /usr/kde/2/share/config /
usr/kde/3/share/config /usr/X11R6/lib/X11/xkb /usr/kde/3.1/share/
config /usr/share/texmf/tex/generic/config/ /usr/share/texmf/tex/
platex/config/ /usr/share/config"
CONFIG_PROTECT_MASK="/etc/gconf /etc/env.d"
CXXFLAGS="-march=athlon-xp -Os -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="sandbox ccache autoaddcvs"
GENTOO_MIRRORS="http://www.ibiblio.org/gentoo ftp://
ftp.ussg.iu.edu/pub/linux/gentoo ftp://gentoo.noved.org/"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY=""
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="x86 oss apm avi crypt cups encode foomaticdb gif jpeg gnome
libg++ mad mikmod mpeg ncurses nls pdflib png quicktime spell
truetype xml2 xmms xv zlib gtkhtml alsa gdbm berkdb slang
readline arts tetex bonobo svga tcltk java guile X sdl gpm tcpd
pam libwww ssl perl python esd imlib oggvorbis gtk qt kde opengl
mozilla cdr mysql athena -motif"
X. While the effect is most obvious as noted above, it also
effects my use of kmail. It seems to take 5x longer to switch
between kmail folders. The increase in time compared to under the
2.4.20 kernel for switching also appears to be directly related
to the number of items in the folders. I use the 'maildir' folder
type.
Please note that everything works as expected under the 2.4.20
kernel.
Thank you,
D. Guy Cadieux
--
Recyle computers. Install Gentoo GNU/Linux.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-10-11 13:49 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-10-11 13:47 Apparent Scheduler problem when using nforce based mobos - kernel 2.6.0-test7-bk2 Guy
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.