* [U-Boot-Users] scc3 on MPC862
@ 2003-11-04 8:00 somshekar chandrashekar kadam
0 siblings, 0 replies; only message in thread
From: somshekar chandrashekar kadam @ 2003-11-04 8:00 UTC (permalink / raw)
To: u-boot
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20031104/e1f7e18d/attachment.htm
-------------- next part --------------
Hi ,
On my custom board clk2 and clk4 of SCC1 used for transmit txcs and receive
rxds , i have changed the port pin configuration from SCC1 to SCC3 ,
I am confused with SICR register setting , on SCC1 value set is 0x0000003d which means brg1 and CLK4 AND CLK2 for Rcx and TCx are set correct if I am wrong ?
on my scc3 port can I use the same clock routing ,when i am not using SCC1. ?
now I have to use SCC3 in Uboot its mentioned use brg3 then what will be the clock settings , ihave no idea ,?
how do confirm this ?
Thanks In Advance
Neelu
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-11-04 8:00 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-11-04 8:00 [U-Boot-Users] scc3 on MPC862 somshekar chandrashekar kadam
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.