Oops with 2.6.2-rc3

Oops with 2.6.2-rc3

[Christian]

[-- Attachment #1: Type: text/plain, Size: 128 bytes --]

Hi,

on a UE2 running debian/unstable I get the attached oops with
linux-2.6.2-rc3 booted with silo-1.4.4 .

thanks.
Christian


[-- Attachment #2: oops-rc3-ksymoops.txt --]
[-- Type: text/plain, Size: 5131 bytes --]

ksymoops 2.4.9 on sparc64 2.6.2-rc3.  Options used
     -V (default)
     -k /proc/ksyms (default)
     -l /proc/modules (default)
     -o /lib/modules/2.6.2-rc3/ (default)
     -m /boot/System.map-2.6.2-rc3 (default)

Warning: You did not tell me where to find symbol information.  I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc.  ksymoops -h explains the options.

Error (regular_file): read_ksyms stat /proc/ksyms failed
ksymoops: No such file or directory
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Feb  1 20:51:50 eclipse kernel: Unable to handle kernel NULL pointer dereference
Feb  1 20:51:50 eclipse kernel: tsk->{mm,active_mm}->context = 00000000000006a4
Feb  1 20:51:50 eclipse kernel: tsk->{mm,active_mm}->pgd = fffff80045f54000
Feb  1 20:51:50 eclipse kernel:               \|/ ____ \|/
Feb  1 20:51:50 eclipse kernel:               "@'/ .. \`@"
Feb  1 20:51:50 eclipse kernel:               /_| \__/ |_\
Feb  1 20:51:50 eclipse kernel:                  \__U_/
Feb  1 20:51:50 eclipse kernel: events/1(8): Oops [#1]
Feb  1 20:51:51 eclipse kernel: TSTATE: 0000001980f09604 TPC: 000000000044f334 TNPC: 000000000044f338 Y: fffff800    Not tainted
Using defaults from ksymoops -t elf32-sparc -a sparc
Feb  1 20:51:51 eclipse kernel: g0: 006e6673345f7061 g1: 0000000000000000 g2: 00000000004671e0 g3: fffff800458a3b80
Feb  1 20:51:51 eclipse kernel: g4: fffff8004031cc60 g5: 0000000000000001 g6: fffff80040364000 g7: 0000000000000000
Feb  1 20:51:51 eclipse kernel: o0: 00000000000001aa o1: 0000000000000000 o2: 0000000000000001 o3: 000000000061bed8
Feb  1 20:51:51 eclipse kernel: o4: 000000000000000a o5: fffff800458a3b00 sp: fffff80040367401 ret_pc: 00000000004674f8
Feb  1 20:51:51 eclipse kernel: l0: 0000000000000001 l1: 0000000000000000 l2: 0000000000000000 l3: 0000000000000000
Feb  1 20:51:51 eclipse kernel: l4: 0000000000000000 l5: 0000000000000000 l6: 0000000000000000 l7: 0000000000000000
Feb  1 20:51:51 eclipse kernel: i0: fffff800458a3bc0 i1: 0000000000000003 i2: 0000000000000001 i3: 0000000000000000
Feb  1 20:51:51 eclipse kernel: i4: 0000000000000002 i5: 0000000000000000 i6: fffff800403674c1 i7: 000000000044f520


>>PC;  0044f334 <__wake_up_common+14/80>   <=====

>>g2; 004671e0 <wait_for_helper+0/a0>
>>o3; 0061bed8 <small_digits.0+0/28>
>>ret_pc; 004674f8 <queue_work+f8/120>
>>i7; 0044f520 <complete+40/a0>

Feb  1 20:51:51 eclipse kernel: Instruction DUMP: b0062008  80a04018  02600017 <e2584000> b3366000  b73ee000  90007fe8  e0007fe8  92100019 


Code;  0044f328 <__wake_up_common+8/80>
00000000 <_PC>:
Code;  0044f328 <__wake_up_common+8/80>
   0:   b0 06 20 08       add  %i0, 8, %i0
Code;  0044f32c <__wake_up_common+c/80>
   4:   80 a0 40 18       cmp  %g1, %i0
Code;  0044f330 <__wake_up_common+10/80>
   8:   02 60 00 17       unknown
Code;  0044f334 <__wake_up_common+14/80>
   c:   e2 58 40 00       unknown
Code;  0044f338 <__wake_up_common+18/80>
  10:   b3 36 60 00       srl  %i1, 0, %i1
Code;  0044f33c <__wake_up_common+1c/80>
  14:   b7 3e e0 00       sra  %i3, 0, %i3
Code;  0044f340 <__wake_up_common+20/80>
  18:   90 00 7f e8       add  %g1, -24, %o0
Code;  0044f344 <__wake_up_common+24/80>
  1c:   e0 00 7f e8       ld  [ %g1 + -24 ], %l0
Code;  0044f348 <__wake_up_common+28/80>
  20:   92 10 00 19       mov  %i1, %o1

Feb  1 20:51:51 eclipse kernel: TSTATE: 0000009980f09604 TPC: 000000000044c20c TNPC: 000000000044c210 Y: 00000000    Not tainted
Feb  1 20:51:51 eclipse kernel: g0: fffff80047a45e20 g1: 0000000077359400 g2: 000000020791e729 g3: 0008000000000000
Feb  1 20:51:51 eclipse kernel: g4: 0000000000650a80 g5: 0000000000000a4f g6: 000000000064ca80 g7: 0000000000000a4f
Feb  1 20:51:51 eclipse kernel: o0: 00000002079209e5 o1: 0000000000000001 o2: 0000000000000001 o3: fffff80040726fa0
Feb  1 20:51:51 eclipse kernel: o4: fffff80000c6f1a4 o5: 0000000000000002 sp: 000000000064fea1 ret_pc: 000000000041da10
Feb  1 20:51:51 eclipse kernel: l0: 0000008f7c68e5ad l1: 0000000000000096 l2: 00000000006ca018 l3: 0000000000000000
Feb  1 20:51:51 eclipse kernel: l4: 00000000006c40c0 l5: 0000000000000000 l6: 0000000000000000 l7: 00000000006df000
Feb  1 20:51:51 eclipse kernel: i0: fffff8004786cce0 i1: 0000000000000a4f i2: 0000000000416254 i3: 0000000000000000
Feb  1 20:51:51 eclipse kernel: i4: 00000000ffff0001 i5: 0000000000ffff00 i6: 000000000064ff61 i7: 000000000044eb1c


>>PC;  0044c20c <recalc_task_prio+2c/260>   <=====

>>g4; 00650a80 <init_task+0/600>
>>g6; 0064ca80 <init_thread_union+0/4000>
>>sp; 0064fea1 <init_thread_union+3421/4000>
>>ret_pc; 0041da10 <sched_clock+10/40>
>>l2; 006ca018 <__per_cpu_offset+0/10>
>>l4; 006c40c0 <per_cpu____cpu_data+0/40>
>>l7; 006df000 <obp_gettod.2+90/100>
>>i2; 00416254 <cpu_idle+34/c0>
>>i6; 0064ff61 <init_thread_union+34e1/4000>
>>i7; 0044eb1c <schedule+2dc/a60>


1 warning and 1 error issued.  Results may not be reliable.

Re: Oops with 2.6.2-rc3

[Ben Collins]

> Using defaults from ksymoops -t elf32-sparc -a sparc

You need to pass the right arguments to ksymoops. It defaults to
sparc32. Use "-t elf64-sparc -a sparc:v9"

-- 
Debian     - http://www.debian.org/
Linux 1394 - http://www.linux1394.org/
Subversion - http://subversion.tigris.org/
WatchGuard - http://www.watchguard.com/

Re: Oops with 2.6.2-rc3

[Christian]

[-- Attachment #1: Type: text/plain, Size: 266 bytes --]

On Mon, 2004-02-02 at 04:26, Ben Collins wrote:
> > Using defaults from ksymoops -t elf32-sparc -a sparc
> 
> You need to pass the right arguments to ksymoops. It defaults to
> sparc32. Use "-t elf64-sparc -a sparc:v9"

sorry. Right one attached.
Cheers.
Christian


[-- Attachment #2: rc3-ksymoops.txt --]
[-- Type: text/plain, Size: 9072 bytes --]

ksymoops 2.4.9 on sparc64 2.6.2-rc3.  Options used
     -V (specified)
     -K (specified)
     -l /proc/modules (specified)
     -o /lib/modules/2.6.2-rc3/ (specified)
     -m /boot/System.map-2.6.2-rc3 (specified)
     -t elf64-sparc -a sparc:v9

No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Feb  2 03:15:01 rphlx1 kernel: Unable to handle kernel NULL pointer dereference
Feb  2 03:15:01 rphlx1 kernel: tsk->{mm,active_mm}->context = 00000000000006b1
Feb  2 03:15:01 rphlx1 kernel: tsk->{mm,active_mm}->pgd = fffff800462a2000
Feb  2 03:15:01 rphlx1 kernel:               \|/ ____ \|/
Feb  2 03:15:01 rphlx1 kernel:               "@'/ .. \`@"
Feb  2 03:15:01 rphlx1 kernel:               /_| \__/ |_\
Feb  2 03:15:01 rphlx1 kernel:                  \__U_/
Feb  2 03:15:01 rphlx1 kernel: events/1(8): Oops [#1]
Feb  2 03:15:01 rphlx1 kernel: TSTATE: 0000001980f09604 TPC: 000000000044f334 TNPC: 000000000044f338 Y: fffff800    Not tainted
Feb  2 03:15:01 rphlx1 kernel: g0: 006e6673345f7061 g1: 0000000000000000 g2: 00000000004671e0 g3: fffff80045f63b80
Feb  2 03:15:01 rphlx1 kernel: g4: fffff8004031cc60 g5: 0000000000000001 g6: fffff80040364000 g7: 0000000000000000
Feb  2 03:15:01 rphlx1 kernel: o0: 00000000000001b5 o1: 0000000000000000 o2: 0000000000000001 o3: 000000000061bed8
Feb  2 03:15:01 rphlx1 kernel: o4: 000000000000000a o5: fffff80045f63b00 sp: fffff80040367401 ret_pc: 00000000004674f8
Feb  2 03:15:01 rphlx1 kernel: l0: 0000000000000001 l1: 0000000000000000 l2: 0000000000000000 l3: 0000000000000000
Feb  2 03:15:01 rphlx1 kernel: l4: 0000000000000000 l5: 0000000000000000 l6: 0000000000000000 l7: 0000000000000000
Feb  2 03:15:01 rphlx1 kernel: i0: fffff80045f63bc0 i1: 0000000000000003 i2: 0000000000000001 i3: 0000000000000000
Feb  2 03:15:01 rphlx1 kernel: i4: 0000000000000002 i5: 0000000000000000 i6: fffff800403674c1 i7: 000000000044f520


>>TPC; 0044f334 <__wake_up_common+14/80>   <=====

>>g2; 004671e0 <wait_for_helper+0/a0>
>>o3; 0061bed8 <small_digits.0+0/28>
>>ret_pc; 004674f8 <queue_work+f8/120>
>>i7; 0044f520 <complete+40/a0>

Feb  2 03:15:01 rphlx1 kernel: Instruction DUMP: b0062008  80a04018  02600017 <e2584000> b3366000  b73ee000  90007fe8  e0007fe8  92100019 


Code;  000000000044f328 <__wake_up_common+8/80>
0000000000000000 <_TPC>:
Code;  000000000044f328 <__wake_up_common+8/80>
   0:   b0 06 20 08       add  %i0, 8, %i0
Code;  000000000044f32c <__wake_up_common+c/80>
   4:   80 a0 40 18       cmp  %g1, %i0
Code;  000000000044f330 <__wake_up_common+10/80>
   8:   02 60 00 17       be,pn   %xcc, 64 <_TPC+0x64>
Code;  000000000044f334 <__wake_up_common+14/80>
   c:   e2 58 40 00       ldx  [ %g1 ], %l1
Code;  000000000044f338 <__wake_up_common+18/80>
  10:   b3 36 60 00       srl  %i1, 0, %i1
Code;  000000000044f33c <__wake_up_common+1c/80>
  14:   b7 3e e0 00       sra  %i3, 0, %i3
Code;  000000000044f340 <__wake_up_common+20/80>
  18:   90 00 7f e8       add  %g1, -24, %o0
Code;  000000000044f344 <__wake_up_common+24/80>
  1c:   e0 00 7f e8       ld  [ %g1 + -24 ], %l0
Code;  000000000044f348 <__wake_up_common+28/80>
  20:   92 10 00 19       mov  %i1, %o1

Feb  2 03:15:01 rphlx1 kernel: TSTATE: 0000004480f09603 TPC: 000000000044eaa0 TNPC: 000000000044eaa4 Y: 00000000    Not tainted
Feb  2 03:15:01 rphlx1 kernel: g0: 000000000040f574 g1: 00000000000518ea g2: 0000000000000001 g3: 0000000000400400
Feb  2 03:15:01 rphlx1 kernel: g4: 0000000000650a80 g5: 00000000006ca018 g6: 000000000064ca80 g7: 0000000000000a31
Feb  2 03:15:01 rphlx1 kernel: o0: 000000039f7e486c o1: 000000000064ce80 o2: 0000000000416254 o3: 0000000000000000
Feb  2 03:15:01 rphlx1 kernel: o4: 00000000ffff0001 o5: 0000000000ffff00 sp: 000000000064ff61 ret_pc: 000000000044e8ac
Feb  2 03:15:01 rphlx1 kernel: l0: fffff80000c6e8b8 l1: fffff8004788c158 l2: fffff8004788c120 l3: 0000000000650a80
Feb  2 03:15:01 rphlx1 kernel: l4: 0000000000000000 l5: fffff80000c6df80 l6: 000000039f7e486c l7: 0000000000650dc0
Feb  2 03:15:01 rphlx1 kernel: i0: 0000000000000400 i1: 000000000064ca88 i2: 0000000000000104 i3: 0000000000000000
Feb  2 03:15:01 rphlx1 kernel: i4: 000000000002ec06 i5: 00000000011fb0fc i6: 0000000000650031 i7: 00000000004162a4


>>TPC; 000000000044eaa0 <schedule+260/a60>   <=====

>>g0; 000000000040f574 <rt_continue+20/a8>
>>g4; 0000000000650a80 <init_task+0/600>
>>g5; 00000000006ca018 <__per_cpu_offset+0/10>
>>g6; 000000000064ca80 <init_thread_union+0/4000>
>>o1; 000000000064ce80 <init_thread_union+400/4000>
>>o2; 0000000000416254 <cpu_idle+34/c0>
>>sp; 000000000064ff61 <init_thread_union+34e1/4000>
>>ret_pc; 000000000044e8ac <schedule+6c/a60>
>>l3; 0000000000650a80 <init_task+0/600>
>>l7; 0000000000650dc0 <init_task+340/600>
>>i1; 000000000064ca88 <init_thread_union+8/4000>
>>i6; 0000000000650031 <init_thread_union+35b1/4000>
>>i7; 00000000004162a4 <cpu_idle+84/c0>

Feb  2 04:05:42 rphlx1 kernel: Unable to handle kernel NULL pointer dereference
Feb  2 04:05:42 rphlx1 kernel: tsk->{mm,active_mm}->context = 00000000000006d3
Feb  2 04:05:42 rphlx1 kernel: tsk->{mm,active_mm}->pgd = fffff80045a88000
Feb  2 04:05:42 rphlx1 kernel:               \|/ ____ \|/
Feb  2 04:05:42 rphlx1 kernel:               "@'/ .. \`@"
Feb  2 04:05:42 rphlx1 kernel:               /_| \__/ |_\
Feb  2 04:05:42 rphlx1 kernel:                  \__U_/
Feb  2 04:05:42 rphlx1 kernel: events/0(7): Oops [#2]
Feb  2 04:05:42 rphlx1 kernel: TSTATE: 0000001980f09604 TPC: 000000000044f334 TNPC: 000000000044f338 Y: 00000000    Not tainted
Feb  2 04:05:42 rphlx1 kernel: g0: 00000000004088ac g1: 0000000000000000 g2: 00000000004671e0 g3: fffff800456dfb80
Feb  2 04:05:42 rphlx1 kernel: g4: fffff8004031d260 g5: 0000000000000001 g6: fffff80040368000 g7: 0000000000000000
Feb  2 04:05:42 rphlx1 kernel: o0: 00000000000001d1 o1: 0000000000000000 o2: 0000000000000001 o3: 000000000061bed8
Feb  2 04:05:42 rphlx1 kernel: o4: 000000000000000a o5: fffff800456dfb00 sp: fffff8004036b401 ret_pc: 00000000004674f8
Feb  2 04:05:42 rphlx1 kernel: l0: 0000000000000001 l1: 0000000000000000 l2: 0000000000000000 l3: 0000000000000000
Feb  2 04:05:42 rphlx1 kernel: l4: 0000000000000000 l5: 0000000000000000 l6: 0000000000000000 l7: 0000000000000000
Feb  2 04:05:42 rphlx1 kernel: i0: fffff800456dfbc0 i1: 0000000000000003 i2: 0000000000000001 i3: 0000000000000000
Feb  2 04:05:42 rphlx1 kernel: i4: 0000000000000002 i5: 0000000000000000 i6: fffff8004036b4c1 i7: 000000000044f520


>>TPC; 000000000044f334 <__wake_up_common+14/80>   <=====

>>g0; 00000000004088ac <tl0_irq5+c/40>
>>g2; 00000000004671e0 <wait_for_helper+0/a0>
>>o3; 000000000061bed8 <small_digits.0+0/28>
>>ret_pc; 00000000004674f8 <queue_work+f8/120>
>>i7; 000000000044f520 <complete+40/a0>

Feb  2 04:05:42 rphlx1 kernel: Instruction DUMP: b0062008  80a04018  02600017 <e2584000> b3366000  b73ee000  90007fe8  e0007fe8  92100019 


Code;  000000000044f328 <__wake_up_common+8/80>
0000000000000000 <_TPC>:
Code;  000000000044f328 <__wake_up_common+8/80>
   0:   b0 06 20 08       add  %i0, 8, %i0
Code;  000000000044f32c <__wake_up_common+c/80>
   4:   80 a0 40 18       cmp  %g1, %i0
Code;  000000000044f330 <__wake_up_common+10/80>
   8:   02 60 00 17       be,pn   %xcc, 64 <_TPC+0x64>
Code;  000000000044f334 <__wake_up_common+14/80>
   c:   e2 58 40 00       ldx  [ %g1 ], %l1
Code;  000000000044f338 <__wake_up_common+18/80>
  10:   b3 36 60 00       srl  %i1, 0, %i1
Code;  000000000044f33c <__wake_up_common+1c/80>
  14:   b7 3e e0 00       sra  %i3, 0, %i3
Code;  000000000044f340 <__wake_up_common+20/80>
  18:   90 00 7f e8       add  %g1, -24, %o0
Code;  000000000044f344 <__wake_up_common+24/80>
  1c:   e0 00 7f e8       ld  [ %g1 + -24 ], %l0
Code;  000000000044f348 <__wake_up_common+28/80>
  20:   92 10 00 19       mov  %i1, %o1

Feb  2 04:05:42 rphlx1 kernel: TSTATE: 0000004480f09602 TPC: 000000000044eaa0 TNPC: 000000000044eaa4 Y: 00000000    Not tainted
Feb  2 04:05:42 rphlx1 kernel: g0: 000000000040f6c0 g1: 0000000000045228 g2: 0000000000000001 g3: 0000000000400400
Feb  2 04:05:42 rphlx1 kernel: g4: fffff80047eec640 g5: 00000000006ca018 g6: fffff80040334000 g7: 00000000000008a4
Feb  2 04:05:42 rphlx1 kernel: o0: 00000003a3396327 o1: fffff80040334400 o2: 000000000041627c o3: 0000000000000000
Feb  2 04:05:42 rphlx1 kernel: o4: 00000000ffff0001 o5: 0000000000ffff00 sp: fffff800403375b1 ret_pc: 000000000044e8ac
Feb  2 04:05:42 rphlx1 kernel: l0: fffff80000c75fd8 l1: fffff8004788c158 l2: fffff8004788c120 l3: fffff80047eec640
Feb  2 04:05:42 rphlx1 kernel: l4: 0000000000000000 l5: fffff80000c75f80 l6: 00000003a3396327 l7: fffff80047eec980
Feb  2 04:05:42 rphlx1 kernel: i0: 0000000000000400 i1: fffff80040334008 i2: fffff80040554150 i3: fffff80045f48f28
Feb  2 04:05:42 rphlx1 kernel: i4: fffff80040554150 i5: 000000000175c225 i6: fffff80040337681 i7: 00000000004162a4


>>TPC; 000000000044eaa0 <schedule+260/a60>   <=====

>>g0; 000000000040f6c0 <kern_fpucheck+84/c4>
>>g5; 00000000006ca018 <__per_cpu_offset+0/10>
>>o2; 000000000041627c <cpu_idle+5c/c0>
>>ret_pc; 000000000044e8ac <schedule+6c/a60>
>>i7; 00000000004162a4 <cpu_idle+84/c0>

Re: Oops with 2.6.2-rc3

[Ben Collins]

> >>TPC; 0044f334 <__wake_up_common+14/80>   <==> 
> >>g2; 004671e0 <wait_for_helper+0/a0>
> >>o3; 0061bed8 <small_digits.0+0/28>
> >>ret_pc; 004674f8 <queue_work+f8/120>
> >>i7; 0044f520 <complete+40/a0>

My best guess is that this is occuring from call_usermodehelper() or
request_module() (the only place that wait_for_helper() is referenced is
in kernel/kmod.c).

What's the last lines printed before you get this oops? You can try
disabling kmod to see if that fixes it, but I'd rather find out why it's
occuring.

-- 
Debian     - http://www.debian.org/
Linux 1394 - http://www.linux1394.org/
Subversion - http://subversion.tigris.org/
WatchGuard - http://www.watchguard.com/

Re: Oops with 2.6.2-rc3

[Christian]

On 02.02.2004   14:32 Ben Collins wrote:
> > >>TPC; 0044f334 <__wake_up_common+14/80>   <==> >
> > >>g2; 004671e0 <wait_for_helper+0/a0>
> > >>o3; 0061bed8 <small_digits.0+0/28>
> > >>ret_pc; 004674f8 <queue_work+f8/120>
> > >>i7; 0044f520 <complete+40/a0>
> 
> My best guess is that this is occuring from call_usermodehelper() or
> request_module() (the only place that wait_for_helper() is referenced is
> in kernel/kmod.c).
> 
> What's the last lines printed before you get this oops? You can try
> disabling kmod to see if that fixes it, but I'd rather find out why it's
> occuring.
> 
> 
well, there are no suspicious lines printed before the oops.
Sometimes I see 'request_module: runaway loop modprobe net-pf-10', but these 
are printed out hours later than the oops.
So, for now I have net-pf-10 aliased to off in modprobe.conf. To your info, 
right before booting 2.6.2-rc3 for the first time I upgraded module-init-tools 
from pre5 to pre9, cause I have been annoyed by these 'request_module: failed 
/sbin/modprobe -- net-pf-10. error = 256' messages.

IMHO this oops is somehow correlated to SMP, because for now it's running fine 
since 4 hours in UP mode.
(normally in SMP mode the oops occured within an hour of uptime - no special 
load, no one logged in, no X)

I'll let this machine run in UP mode for the next 5 hours and will then do 
tests in SMP with kmod off.
This is a SBUS 2way UltrasparcI.



  - Christian

Re: Oops with 2.6.2-rc3

[Ben Collins]

> well, there are no suspicious lines printed before the oops.
> Sometimes I see 'request_module: runaway loop modprobe net-pf-10', but 
> these are printed out hours later than the oops.
> So, for now I have net-pf-10 aliased to off in modprobe.conf. To your info, 
> right before booting 2.6.2-rc3 for the first time I upgraded 
> module-init-tools from pre5 to pre9, cause I have been annoyed by these 
> 'request_module: failed /sbin/modprobe -- net-pf-10. error = 256' messages.
> 
> IMHO this oops is somehow correlated to SMP, because for now it's running 
> fine since 4 hours in UP mode.
> (normally in SMP mode the oops occured within an hour of uptime - no 
> special load, no one logged in, no X)
> 
> I'll let this machine run in UP mode for the next 5 hours and will then do 
> tests in SMP with kmod off.
> This is a SBUS 2way UltrasparcI.

My mistake. I assumed this occured at boot. The net-pf-10 is the ipv6
module. Do you have 'alias net-pf-10 ipv6' in modules.conf? I suspect
this is occuring when something is doing an AAAA DNS lookup (glibc does
this on most calls for DNS lookups).

Not sure if that's the cause of the oops though, but it would make
sense. request_module() uses vsnprintf, which would explain why we see
small_digits in the backtrace. It also invokes call_usermodehelper()
with the wait flag, and this is what the backtrace shows is happening.

If it's related to SMP, then try enabling the spinlock debug. See if
that prints anything interesting.

-- 
Debian     - http://www.debian.org/
Linux 1394 - http://www.linux1394.org/
Subversion - http://subversion.tigris.org/
WatchGuard - http://www.watchguard.com/

Re: Oops with 2.6.2-rc3

[Christian]

> > IMHO this oops is somehow correlated to SMP, because for now it's running
> > fine since 4 hours in UP mode.
> > (normally in SMP mode the oops occured within an hour of uptime - no
> > special load, no one logged in, no X)
> >
> > I'll let this machine run in UP mode for the next 5 hours and will then do
> > tests in SMP with kmod off.
> > This is a SBUS 2way UltrasparcI.
> 
> My mistake. I assumed this occured at boot. The net-pf-10 is the ipv6
> module. Do you have 'alias net-pf-10 ipv6' in modules.conf? I suspect
> this is occuring when something is doing an AAAA DNS lookup (glibc does
> this on most calls for DNS lookups).
> 

as I said before, I have 'alias net-pf-10 off' in modprobe.conf.
(although there's neither ipv6 enabled in kernel nor available as module)
Your DNS lookup theory may be right, cause from the timestamps in the kern 
logs the oops has always been at times when exim is run by cron. (and 
debian/unstable's exim3 is ipv6 capable, me thinks)

> Not sure if that's the cause of the oops though, but it would make
> sense. request_module() uses vsnprintf, which would explain why we see
> small_digits in the backtrace. It also invokes call_usermodehelper()
> with the wait flag, and this is what the backtrace shows is happening.
> 
> If it's related to SMP, then try enabling the spinlock debug. See if
> that prints anything interesting.
> 
> 
okay, will do so.

  - Christian

Re: Oops with 2.6.2-rc3

[Christian]

On Mon, 2004-02-02 at 15:32, Ben Collins wrote:
> > well, there are no suspicious lines printed before the oops.
> > Sometimes I see 'request_module: runaway loop modprobe net-pf-10', but 
> > these are printed out hours later than the oops.
> > So, for now I have net-pf-10 aliased to off in modprobe.conf. To your info, 
> > right before booting 2.6.2-rc3 for the first time I upgraded 
> > module-init-tools from pre5 to pre9, cause I have been annoyed by these 
> > 'request_module: failed /sbin/modprobe -- net-pf-10. error = 256' messages.
> > 
> > IMHO this oops is somehow correlated to SMP, because for now it's running 
> > fine since 4 hours in UP mode.
> > (normally in SMP mode the oops occured within an hour of uptime - no 
> > special load, no one logged in, no X)
> > 
> > I'll let this machine run in UP mode for the next 5 hours and will then do 
> > tests in SMP with kmod off.
> > This is a SBUS 2way UltrasparcI.
> 
> My mistake. I assumed this occured at boot. The net-pf-10 is the ipv6
> module. Do you have 'alias net-pf-10 ipv6' in modules.conf? I suspect
> this is occuring when something is doing an AAAA DNS lookup (glibc does
> this on most calls for DNS lookups).
> 
> Not sure if that's the cause of the oops though, but it would make
> sense. request_module() uses vsnprintf, which would explain why we see
> small_digits in the backtrace. It also invokes call_usermodehelper()
> with the wait flag, and this is what the backtrace shows is happening.
> 
> If it's related to SMP, then try enabling the spinlock debug. See if
> that prints anything interesting.
Ben, 

this doesn't compile with CONFIG_DEBUG_SPINLOCK=y ... (linux-2.6.2-rc3,
uptodate debian/unstable)

  CC      arch/sparc64/kernel/chmc.o
  CC      arch/sparc64/kernel/smp.o
  AS      arch/sparc64/kernel/trampoline.o
  AS      arch/sparc64/kernel/sys32.o
  CC      arch/sparc64/kernel/sys_sparc32.o
In file included from include/linux/ip.h:84,
                 from include/linux/tcp.h:192,
                 from include/linux/ipv6.h:175,
                 from arch/sparc64/kernel/sys_sparc32.c:47:
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:827: warning: implicit declaration of function
`_raw_write_trylock'

any idea?

thanks,
Christian

Re: Oops with 2.6.2-rc3

[Ben Collins]

On Tue, Feb 03, 2004 at 05:08:59PM +0100, Christian Guggenberger wrote:
> On Mon, 2004-02-02 at 14:32, Ben Collins wrote:
> > > >>TPC; 0044f334 <__wake_up_common+14/80>   <==> > > 
> > > >>g2; 004671e0 <wait_for_helper+0/a0>
> > > >>o3; 0061bed8 <small_digits.0+0/28>
> > > >>ret_pc; 004674f8 <queue_work+f8/120>
> > > >>i7; 0044f520 <complete+40/a0>
> > 
> > My best guess is that this is occuring from call_usermodehelper() or
> > request_module() (the only place that wait_for_helper() is referenced is
> > in kernel/kmod.c).
> > 
> > What's the last lines printed before you get this oops? You can try
> > disabling kmod to see if that fixes it, but I'd rather find out why it's
> > occuring.
> 
> Disabling kmod seems to help in this situation, it's been up for 6 hours
> in SMP mode now - no oops occured.

We should really try to track down the race condition that seems to be
occuring with kmod and call_usermodehelper() then. Are you up for some
more testing?

-- 
Debian     - http://www.debian.org/
Linux 1394 - http://www.linux1394.org/
Subversion - http://subversion.tigris.org/
WatchGuard - http://www.watchguard.com/

Re: Oops with 2.6.2-rc3

[Christian]

On Mon, 2004-02-02 at 14:32, Ben Collins wrote:
> > >>TPC; 0044f334 <__wake_up_common+14/80>   <==> > 
> > >>g2; 004671e0 <wait_for_helper+0/a0>
> > >>o3; 0061bed8 <small_digits.0+0/28>
> > >>ret_pc; 004674f8 <queue_work+f8/120>
> > >>i7; 0044f520 <complete+40/a0>
> 
> My best guess is that this is occuring from call_usermodehelper() or
> request_module() (the only place that wait_for_helper() is referenced is
> in kernel/kmod.c).
> 
> What's the last lines printed before you get this oops? You can try
> disabling kmod to see if that fixes it, but I'd rather find out why it's
> occuring.

Disabling kmod seems to help in this situation, it's been up for 6 hours
in SMP mode now - no oops occured.

 - Christian

Re: Oops with 2.6.2-rc3

[Francis Provencher]

On Wed, Feb 04, 2004 at 06:29:39PM -0500, Francis Provencher wrote:
> On Mon, Feb 02, 2004 at 03:14:11PM -0500, Jeremy Andrews wrote:
> >   The computer seems to crash once or twice a day -- always a hard freeze requiring that I press the reset button to reboot.  I have not found a pattern -- during this crash I had the Gnome desktop up and I was balancing my checkbook with GnuCash.
> 
> This is my main workstation and It's been rock stable with the 2.4 kernel serie... Someone proposed to remove the Preempt option. I'll try that.

No good, it still freezes without preempt...

> I don't have any message in the logs that could point to something. 

Do you have any idea of what I could do to get more info on what's happening? Something that could help me pinpoint the problem...

Thank you

-Francis
-- 
Francis Provencher <darkfox@TZoNE.ORG> 
http://www.TZoNE.ORG/~darkfox/ 
"What if the bird will not sing?"

Re: Oops with 2.6.2-rc3

[Francis Provencher]

[-- Attachment #1: Type: text/plain, Size: 1261 bytes --]

On Mon, Feb 02, 2004 at 03:14:11PM -0500, Jeremy Andrews wrote:
>   The computer seems to crash once or twice a day -- always a hard freeze requiring that I press the reset button to reboot.  I have not found a pattern -- during this crash I had the Gnome desktop up and I was balancing my checkbook with GnuCash.

Hum, I'm having a similar problem. My computer will hard freeze after some time (between 3 hours and 24 hours, with a curve closer to 3 hours). I had the same behavior with 2.6.0, 2.6.1, 2.6.2-rc(1,2,3), 2.6.2.

I don't have any message in the logs that could point to something. 

This is my main workstation and It's been rock stable with the 2.4 kernel serie... Someone proposed to remove the Preempt option. I'll try that.

Note: When my station would freeze, often my sound card would start emiting a stable (and annoying) sound. Thinking that maybe the problem could be related to alsa, I patched my kernel with the latest 1.0.2 patch from Jaroslav Kysela <perex@suse.cz> (ftp://ftp.alsa-project.org/pub/kernel-patches/alsa-bk-2004-01-27.patch.gz)

Attached are my .config and my lspci and dmesgs are attached. Tell me if you need something else.

Thx.

-Francis
-- 
Francis Provencher <darkfox@TZoNE.ORG>
"What if the bird will not sing?"

[-- Attachment #2: config-2.6.2 --]
[-- Type: text/plain, Size: 26763 bytes --]

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_RELAXED_AML is not set

#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
CONFIG_APM_REAL_MODE_POWER_OFF=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_USE_VECTOR is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_FW_LOADER=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_BLK_DEV_PDC202XX_NEW=m
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
CONFIG_BLK_DEV_3W_XXXX_RAID=y
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX_CONFIG=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA23XX is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETFILTER is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=m
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
CONFIG_VORTEX=y
CONFIG_TYPHOON=m
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=m
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# Bluetooth support
#
# CONFIG_BT is not set

#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_MGA=y
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HANGCHECK_TIMER=y

#
# I2C support
#
# CONFIG_I2C is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
CONFIG_FB_MATROX=m
# CONFIG_FB_MATROX_MILLENIUM is not set
# CONFIG_FB_MATROX_MYSTIQUE is not set
CONFIG_FB_MATROX_G450=y
CONFIG_FB_MATROX_G100=y
# CONFIG_FB_MATROX_MULTIHEAD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set

#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_EMU10K1=y
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set

#
# ALSA USB devices
#
CONFIG_SND_USB_AUDIO=y

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y

#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
CONFIG_USB_LED=m
# CONFIG_USB_TEST is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EFS_FS=m
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_TEST=m

#
# Library routines
#
CONFIG_CRC32=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y

[-- Attachment #3: dmesg.2423 --]
[-- Type: text/plain, Size: 9129 bytes --]

Linux version 2.4.23 (root@mikazuki) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Fri Jan 2 14:18:50 EST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000017fec000 (usable)
 BIOS-e820: 0000000017fec000 - 0000000017fef000 (ACPI data)
 BIOS-e820: 0000000017fef000 - 0000000017fff000 (reserved)
 BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
383MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 98284
zone(0): 4096 pages.
zone(1): 94188 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 ASUS                                      ) @ 0x000f7290
ACPI: RSDT (v001 ASUS   CUV4X_E  0x30303031 MSFT 0x31313031) @ 0x17fec000
ACPI: FADT (v001 ASUS   CUV4X_E  0x30303031 MSFT 0x31313031) @ 0x17fec080
ACPI: BOOT (v001 ASUS   CUV4X_E  0x30303031 MSFT 0x31313031) @ 0x17fec040
ACPI: DSDT (v001   ASUS CUV4X_E  0x00001000 MSFT 0x0100000b) @ 0x00000000
Kernel command line: BOOT_IMAGE=Linux2423New ro root=1601
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 866.444 MHz processor.
Console: colour VGA+ 80x30
Calibrating delay loop... 1723.59 BogoMIPS
Memory: 385612k/393136k available (1668k kernel code, 7136k reserved, 825k data, 136k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 866.4547 MHz.
..... host bus clock speed is 133.3006 MHz.
cpu: 0, clocks: 1333006, slice: 666503
CPU0<T0:1332992,T1:666480,D:9,S:666503,C:1333006>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20031002
PCI: PCI BIOS revision 2.10 entry at 0xf0cd0, last bus=1
PCI: Using configuration type 1
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 4
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
PCI: Disabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1 C2, 16 throttling states)
parport0: PC-style at 0x3bc (0x7bc) [PCSPP,TRISTATE]
parport_pc: Via 686A parallel port: io=0x3BC
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
FDC 0 is a post-1991 82077
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
00:09.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xb800. Vers LK1.1.18-ac
 00:60:97:93:5a:79, IRQ 10
  product code 4848 rev 00.0 date 02-09-97
  Internal config register is 16302d8, transceivers 0xe040.
  8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
  MII transceiver found at address 24, status 786f.
  Enabling bus-master transmits and whole-frame receives.
00:09.0: scatter/gather enabled. h/w checksums disabled
eth0: Dropping NETIF_F_SG since no checksum feature.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 321M
agpgart: Unsupported Via chipset (device id: 0605), you might want to boot with agp=try_unsupported
agpgart: no supported devices found.
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: WDC WD400BB-32AUA1, ATA DISK drive
hdb: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive
hdc: Maxtor 2F030J0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63
hdb: attached ide-cdrom driver.
hdb: ATAPI 50X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
 /dev/ide/host1/bus0/target0/lun0: p1 p2
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
usb.c: registered new driver hub
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: ide1(22,1): orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 1093525
ext3_orphan_cleanup: deleting unreferenced inode 1093524
ext3_orphan_cleanup: deleting unreferenced inode 1093523
ext3_orphan_cleanup: deleting unreferenced inode 97932
EXT3-fs: ide1(22,1): 4 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Adding Swap: 999928k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
NTFS driver v1.1.22 [Flags: R/W MODULE]
usb-uhci.c: $Revision: 1.275 $ time 14:26:08 Jan  2 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:04.2-1, assigned address 2
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: new USB device 00:04.2-2, assigned address 3
input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb1:3.0
hub.c: new USB device 00:04.2-1.3, assigned address 4
input: USB HID v1.00 Keyboard [  Keyboard Hub] on usb1:4.0
input: USB HID v1.00 Device [  Keyboard Hub] on usb1:4.1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: overridden by ACPI.
cdrom: This disc doesn't have any tracks I recognize!
smbfs: Unrecognized mount option noexec
smb_trans2_request: result=-104, setting invalid
smb_retry: successful, new pid=1426, generation=2

[-- Attachment #4: kern262.log --]
[-- Type: text/plain, Size: 16342 bytes --]

Feb  4 13:35:31 mikazuki kernel: Linux version 2.6.2 (root@mikazuki) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Wed Feb 4 12:18:45 EST 2004
Feb  4 13:35:31 mikazuki kernel: BIOS-provided physical RAM map:
Feb  4 13:35:31 mikazuki kernel:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Feb  4 13:35:31 mikazuki kernel:  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Feb  4 13:35:31 mikazuki kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Feb  4 13:35:31 mikazuki kernel:  BIOS-e820: 0000000000100000 - 0000000017fec000 (usable)
Feb  4 13:35:31 mikazuki kernel:  BIOS-e820: 0000000017fec000 - 0000000017fef000 (ACPI data)
Feb  4 13:35:31 mikazuki kernel:  BIOS-e820: 0000000017fef000 - 0000000017fff000 (reserved)
Feb  4 13:35:31 mikazuki kernel:  BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS)
Feb  4 13:35:31 mikazuki kernel:  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Feb  4 13:35:31 mikazuki kernel: 383MB LOWMEM available.
Feb  4 13:35:31 mikazuki kernel: On node 0 totalpages: 98284
Feb  4 13:35:31 mikazuki kernel:   DMA zone: 4096 pages, LIFO batch:1
Feb  4 13:35:31 mikazuki kernel:   Normal zone: 94188 pages, LIFO batch:16
Feb  4 13:35:31 mikazuki kernel:   HighMem zone: 0 pages, LIFO batch:1
Feb  4 13:35:31 mikazuki kernel: DMI 2.3 present.
Feb  4 13:35:31 mikazuki kernel: ACPI: RSDP (v000 ASUS                                      ) @ 0x000f7290
Feb  4 13:35:31 mikazuki kernel: ACPI: RSDT (v001 ASUS   CUV4X_E  0x30303031 MSFT 0x31313031) @ 0x17fec000
Feb  4 13:35:31 mikazuki kernel: ACPI: FADT (v001 ASUS   CUV4X_E  0x30303031 MSFT 0x31313031) @ 0x17fec080
Feb  4 13:35:31 mikazuki kernel: ACPI: BOOT (v001 ASUS   CUV4X_E  0x30303031 MSFT 0x31313031) @ 0x17fec040
Feb  4 13:35:31 mikazuki kernel: ACPI: DSDT (v001   ASUS CUV4X_E  0x00001000 MSFT 0x0100000b) @ 0x00000000
Feb  4 13:35:31 mikazuki kernel: Building zonelist for node : 0
Feb  4 13:35:31 mikazuki kernel: Kernel command line: BOOT_IMAGE=Linux262 ro root=1601
Feb  4 13:35:31 mikazuki kernel: Local APIC disabled by BIOS -- reenabling.
Feb  4 13:35:31 mikazuki kernel: Found and enabled local APIC!
Feb  4 13:35:31 mikazuki kernel: Initializing CPU#0
Feb  4 13:35:31 mikazuki kernel: PID hash table entries: 2048 (order 11: 16384 bytes)
Feb  4 13:35:31 mikazuki kernel: Detected 867.094 MHz processor.
Feb  4 13:35:31 mikazuki kernel: Using tsc for high-res timesource
Feb  4 13:35:31 mikazuki kernel: Console: colour VGA+ 80x30
Feb  4 13:35:31 mikazuki kernel: Memory: 384544k/393136k available (2314k kernel code, 7852k reserved, 1264k data, 160k init, 0k highmem)
Feb  4 13:35:31 mikazuki kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Feb  4 13:35:31 mikazuki kernel: Calibrating delay loop... 1695.74 BogoMIPS
Feb  4 13:35:31 mikazuki kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Feb  4 13:35:31 mikazuki kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Feb  4 13:35:31 mikazuki kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Feb  4 13:35:31 mikazuki kernel: CPU:     After generic identify, caps: 0383fbff 00000000 00000000 00000000
Feb  4 13:35:31 mikazuki kernel: CPU:     After vendor identify, caps: 0383fbff 00000000 00000000 00000000
Feb  4 13:35:31 mikazuki kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Feb  4 13:35:31 mikazuki kernel: CPU: L2 cache: 256K
Feb  4 13:35:31 mikazuki kernel: CPU:     After all inits, caps: 0383fbff 00000000 00000000 00000040
Feb  4 13:35:31 mikazuki kernel: Intel machine check architecture supported.
Feb  4 13:35:31 mikazuki kernel: Intel machine check reporting enabled on CPU#0.
Feb  4 13:35:31 mikazuki kernel: CPU: Intel Pentium III (Coppermine) stepping 06
Feb  4 13:35:31 mikazuki kernel: Enabling fast FPU save and restore... done.
Feb  4 13:35:31 mikazuki kernel: Enabling unmasked SIMD FPU exception support... done.
Feb  4 13:35:31 mikazuki kernel: Checking 'hlt' instruction... OK.
Feb  4 13:35:31 mikazuki kernel: POSIX conformance testing by UNIFIX
Feb  4 13:35:31 mikazuki kernel: enabled ExtINT on CPU#0
Feb  4 13:35:31 mikazuki kernel: ESR value before enabling vector: 00000000
Feb  4 13:35:31 mikazuki kernel: ESR value after enabling vector: 00000000
Feb  4 13:35:31 mikazuki kernel: Using local APIC timer interrupts.
Feb  4 13:35:31 mikazuki kernel: calibrating APIC timer ...
Feb  4 13:35:31 mikazuki kernel: ..... CPU clock speed is 866.0211 MHz.
Feb  4 13:35:31 mikazuki kernel: ..... host bus clock speed is 133.0263 MHz.
Feb  4 13:35:31 mikazuki kernel: NET: Registered protocol family 16
Feb  4 13:35:31 mikazuki kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0cd0, last bus=1
Feb  4 13:35:31 mikazuki kernel: PCI: Using configuration type 1
Feb  4 13:35:31 mikazuki kernel: mtrr: v2.0 (20020519)
Feb  4 13:35:31 mikazuki kernel: ACPI: Subsystem revision 20040116
Feb  4 13:35:31 mikazuki kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
Feb  4 13:35:31 mikazuki kernel: ACPI: Interpreter enabled
Feb  4 13:35:31 mikazuki kernel: ACPI: Using PIC for interrupt routing
Feb  4 13:35:31 mikazuki kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
Feb  4 13:35:31 mikazuki kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
Feb  4 13:35:31 mikazuki kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Feb  4 13:35:31 mikazuki kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Feb  4 13:35:31 mikazuki kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Feb  4 13:35:31 mikazuki kernel: PCI: Probing PCI hardware (bus 00)
Feb  4 13:35:31 mikazuki kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Feb  4 13:35:31 mikazuki kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Feb  4 13:35:31 mikazuki kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Feb  4 13:35:31 mikazuki kernel: SCSI subsystem initialized
Feb  4 13:35:31 mikazuki kernel: drivers/usb/core/usb.c: registered new driver usbfs
Feb  4 13:35:31 mikazuki kernel: drivers/usb/core/usb.c: registered new driver hub
Feb  4 13:35:31 mikazuki kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
Feb  4 13:35:31 mikazuki kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
Feb  4 13:35:31 mikazuki kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 4
Feb  4 13:35:31 mikazuki kernel: PCI: Using ACPI for IRQ routing
Feb  4 13:35:31 mikazuki kernel: PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Feb  4 13:35:31 mikazuki kernel: SBF: Simple Boot Flag extension found and enabled.
Feb  4 13:35:31 mikazuki kernel: SBF: Setting boot flags 0x1
Feb  4 13:35:31 mikazuki kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Feb  4 13:35:31 mikazuki kernel: apm: overridden by ACPI.
Feb  4 13:35:31 mikazuki kernel: ikconfig 0.7 with /proc/config*
Feb  4 13:35:31 mikazuki kernel: devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
Feb  4 13:35:31 mikazuki kernel: devfs: boot_options: 0x1
Feb  4 13:35:31 mikazuki kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Feb  4 13:35:31 mikazuki kernel: Initializing Cryptographic API
Feb  4 13:35:31 mikazuki kernel: PCI: Disabling Via external APIC routing
Feb  4 13:35:31 mikazuki kernel: ACPI: Power Button (FF) [PWRF]
Feb  4 13:35:31 mikazuki kernel: ACPI: Processor [CPU0] (supports C1 C2, 16 throttling states)
Feb  4 13:35:31 mikazuki kernel: isapnp: Scanning for PnP cards...
Feb  4 13:35:31 mikazuki kernel: isapnp: No Plug & Play device found
Feb  4 13:35:31 mikazuki kernel: pty: 256 Unix98 ptys configured
Feb  4 13:35:31 mikazuki kernel: Real Time Clock Driver v1.12
Feb  4 13:35:31 mikazuki kernel: Linux agpgart interface v0.100 (c) Dave Jones
Feb  4 13:35:31 mikazuki kernel: agpgart: Detected VIA ProSavage PM133/PL133/PN133 chipset
Feb  4 13:35:31 mikazuki kernel: agpgart: Maximum main memory to use for agp memory: 321M
Feb  4 13:35:31 mikazuki kernel: agpgart: AGP aperture is 32M @ 0xfc000000
Feb  4 13:35:31 mikazuki kernel: [drm] Initialized mga 3.1.0 20021029 on minor 0
Feb  4 13:35:31 mikazuki kernel: Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds).
Feb  4 13:35:31 mikazuki kernel: parport0: PC-style at 0x3bc (0x7bc) [PCSPP,TRISTATE]
Feb  4 13:35:31 mikazuki kernel: parport0: cpp_daisy: aa5500ff(38)
Feb  4 13:35:31 mikazuki kernel: parport0: assign_addrs: aa5500ff(38)
Feb  4 13:35:31 mikazuki kernel: parport0: cpp_daisy: aa5500ff(38)
Feb  4 13:35:31 mikazuki kernel: parport0: assign_addrs: aa5500ff(38)
Feb  4 13:35:31 mikazuki kernel: parport_pc: Via 686A parallel port: io=0x3BC
Feb  4 13:35:31 mikazuki kernel: Using anticipatory io scheduler
Feb  4 13:35:31 mikazuki kernel: Floppy drive(s): fd0 is 1.44M
Feb  4 13:35:31 mikazuki kernel: FDC 0 is a post-1991 82077
Feb  4 13:35:31 mikazuki kernel: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
Feb  4 13:35:31 mikazuki kernel: 0000:00:09.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xb800. Vers LK1.1.19
Feb  4 13:35:31 mikazuki kernel: eth0: Dropping NETIF_F_SG since no checksum feature.
Feb  4 13:35:31 mikazuki kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Feb  4 13:35:31 mikazuki kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb  4 13:35:31 mikazuki kernel: hda: WDC WD400BB-32AUA1, ATA DISK drive
Feb  4 13:35:31 mikazuki kernel: hdb: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive
Feb  4 13:35:31 mikazuki kernel: hdc: Maxtor 2F030J0, ATA DISK drive
Feb  4 13:35:31 mikazuki kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb  4 13:35:31 mikazuki kernel: ide1 at 0x170-0x177,0x376 on irq 15
Feb  4 13:35:31 mikazuki kernel: hda: max request size: 128KiB
Feb  4 13:35:31 mikazuki kernel: hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63
Feb  4 13:35:31 mikazuki kernel:  /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
Feb  4 13:35:31 mikazuki kernel: hdc: max request size: 128KiB
Feb  4 13:35:31 mikazuki kernel: hdc: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63
Feb  4 13:35:31 mikazuki kernel:  /dev/ide/host1/bus0/target0/lun0: p1 p2
Feb  4 13:35:31 mikazuki kernel: hdb: ATAPI 50X CD-ROM drive, 128kB Cache
Feb  4 13:35:31 mikazuki kernel: Uniform CD-ROM driver Revision: 3.20
Feb  4 13:35:31 mikazuki kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
Feb  4 13:35:31 mikazuki kernel: 3w-xxxx: No cards found.
Feb  4 13:35:31 mikazuki kernel: ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Feb  4 13:35:31 mikazuki kernel: ohci_hcd: block sizes: ed 64 td 64
Feb  4 13:35:31 mikazuki kernel: drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
Feb  4 13:35:31 mikazuki kernel: uhci_hcd 0000:00:04.2: UHCI Host Controller
Feb  4 13:35:31 mikazuki kernel: uhci_hcd 0000:00:04.2: irq 11, io base 0000d400
Feb  4 13:35:31 mikazuki kernel: uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
Feb  4 13:35:31 mikazuki kernel: hub 1-0:1.0: USB hub found
Feb  4 13:35:31 mikazuki kernel: hub 1-0:1.0: 2 ports detected
Feb  4 13:35:31 mikazuki kernel: uhci_hcd 0000:00:04.3: UHCI Host Controller
Feb  4 13:35:31 mikazuki kernel: uhci_hcd 0000:00:04.3: irq 11, io base 0000d000
Feb  4 13:35:31 mikazuki kernel: uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
Feb  4 13:35:31 mikazuki kernel: hub 2-0:1.0: USB hub found
Feb  4 13:35:31 mikazuki kernel: hub 2-0:1.0: 2 ports detected
Feb  4 13:35:31 mikazuki kernel: Initializing USB Mass Storage driver...
Feb  4 13:35:31 mikazuki kernel: drivers/usb/core/usb.c: registered new driver usb-storage
Feb  4 13:35:31 mikazuki kernel: USB Mass Storage support registered.
Feb  4 13:35:31 mikazuki kernel: drivers/usb/core/usb.c: registered new driver hid
Feb  4 13:35:31 mikazuki kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Feb  4 13:35:31 mikazuki kernel: mice: PS/2 mouse device common for all mice
Feb  4 13:35:31 mikazuki kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Feb  4 13:35:31 mikazuki kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Feb  4 13:35:31 mikazuki kernel: Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC).
Feb  4 13:35:31 mikazuki kernel: request_module: failed /sbin/modprobe -- snd-card-0. error = -16
Feb  4 13:35:31 mikazuki kernel: drivers/usb/core/usb.c: registered new driver snd-usb-audio
Feb  4 13:35:31 mikazuki kernel: ALSA device list:
Feb  4 13:35:31 mikazuki kernel:   #0: Sound Blaster Live! (rev.4) at 0xb400, irq 11
Feb  4 13:35:31 mikazuki kernel: NET: Registered protocol family 2
Feb  4 13:35:31 mikazuki kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Feb  4 13:35:31 mikazuki kernel: TCP: Hash tables configured (established 32768 bind 32768)
Feb  4 13:35:31 mikazuki kernel: NET: Registered protocol family 1
Feb  4 13:35:31 mikazuki kernel: NET: Registered protocol family 17
Feb  4 13:35:31 mikazuki kernel: ACPI: (supports S0 S1 S4 S5)
Feb  4 13:35:31 mikazuki kernel: kjournald starting.  Commit interval 5 seconds
Feb  4 13:35:31 mikazuki kernel: EXT3-fs: mounted filesystem with ordered data mode.
Feb  4 13:35:31 mikazuki kernel: VFS: Mounted root (ext3 filesystem) readonly.
Feb  4 13:35:31 mikazuki kernel: Mounted devfs on /dev
Feb  4 13:35:31 mikazuki kernel: Freeing unused kernel memory: 160k freed
Feb  4 13:35:31 mikazuki kernel: hub 1-0:1.0: new USB device on port 1, assigned address 2
Feb  4 13:35:31 mikazuki kernel: hub 1-1:1.0: USB hub found
Feb  4 13:35:31 mikazuki kernel: hub 1-1:1.0: 3 ports detected
Feb  4 13:35:31 mikazuki kernel: hub 1-0:1.0: new USB device on port 2, assigned address 3
Feb  4 13:35:31 mikazuki kernel: input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:04.2-2
Feb  4 13:35:31 mikazuki kernel: hub 1-1:1.0: new USB device on port 3, assigned address 4
Feb  4 13:35:31 mikazuki kernel: input: USB HID v1.00 Keyboard [  Keyboard Hub] on usb-0000:00:04.2-1.3
Feb  4 13:35:31 mikazuki kernel: input: USB HID v1.00 Device [  Keyboard Hub] on usb-0000:00:04.2-1.3
Feb  4 13:35:31 mikazuki kernel: Adding 999928k swap on /dev/hdc2.  Priority:-1 extents:1
Feb  4 13:35:31 mikazuki kernel: EXT3 FS on hdc1, internal journal
Feb  4 13:35:31 mikazuki kernel: NTFS driver 2.1.6 [Flags: R/W MODULE].
Feb  4 13:35:47 mikazuki kernel: nfs warning: mount version older than kernel
Feb  4 13:35:47 mikazuki kernel: nfs warning: mount version older than kernel
Feb  4 13:36:06 mikazuki kernel: agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Feb  4 13:36:06 mikazuki kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
Feb  4 13:36:06 mikazuki kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
Feb  4 13:38:02 mikazuki kernel: NET: Registered protocol family 10
Feb  4 13:38:02 mikazuki kernel: IPv6 over IPv4 tunneling driver
Feb  4 13:38:12 mikazuki kernel: eth0: no IPv6 routers present
Feb  4 13:38:24 mikazuki kernel: cdrom: This disc doesn't have any tracks I recognize!
Feb  4 13:45:39 mikazuki kernel: nfs warning: mount version older than kernel
Feb  4 13:45:39 mikazuki kernel: nfs warning: mount version older than kernel
Feb  4 13:45:49 mikazuki kernel: spurious 8259A interrupt: IRQ7.
Feb  4 14:07:40 mikazuki kernel: nfs warning: mount version older than kernel
Feb  4 14:19:03 mikazuki kernel: nfs warning: mount version older than kernel
Feb  4 14:22:14 mikazuki kernel: smbfs: Unrecognized mount option noexec
Feb  4 14:29:48 mikazuki kernel: SMB connection re-established (-5)
Feb  4 14:29:48 mikazuki kernel: smb_errno: class ERRSRV, code 91 from command 0x32
Feb  4 14:29:48 mikazuki kernel: smb_file_write: en/.md_transition.asp.swp validation failed, error=4294967291
Feb  4 14:31:40 mikazuki kernel: nfs warning: mount version older than kernel
Feb  4 15:32:39 mikazuki kernel: cdrom: This disc doesn't have any tracks I recognize!
Feb  4 15:32:47 mikazuki kernel: nfs warning: mount version older than kernel
Feb  4 15:40:44 mikazuki kernel: SMB connection re-established (-5)
Feb  4 15:40:44 mikazuki kernel: smb_errno: class ERRSRV, code 91 from command 0x32
Feb  4 15:40:44 mikazuki kernel: smb_file_write: en/.md_transition.asp.swp validation failed, error=4294967291

[-- Attachment #5: lspci --]
[-- Type: text/plain, Size: 820 bytes --]

00:00.0 Host bridge: VIA Technologies, Inc. VT8605 [ProSavage PM133] (rev c4)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
00:04.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00:04.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16)
00:04.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16)
00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:09.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 04)
00:0a.1 Input device controller: Creative Labs SB Live! (rev 01)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04)

Re: Oops with 2.6.2-rc3

[Jeremy Andrews]

On Mon, 02 Feb 2004 23:03:30 +0200
Markus Hästbacka <midian@ihme.org> wrote:

> I heard that the PREEMPT is causing problems, earlier, try without
> CONFIG_PREEMPT

Indeed the machine appears stable without PREEMPT at the moment, though I
also made other configuration changes as well.  I'll keep adding back
things I need one by one to see if the instability returns / which causes
it.

> Could you please describe what the server is serving (router or
> something else?)

It's my primary desktop computer (so I certainly hope that PREEMPT is not
triggering the problem).

Cheers,
 -Jeremy

Re: Oops with 2.6.2-rc3

[Markus Hästbacka]

[-- Attachment #1: Type: text/plain, Size: 1635 bytes --]

On Mon, 2004-02-02 at 22:14, Jeremy Andrews wrote:
> Hello,
> 
>   Attached is the text from a series of four Oops that ultimately locked up my computer.  This is a new server that I've been having trouble getting stable for the past week -- this is the first Oops I've managed to capture.  It's a 2.6.2-rc3 kernel compiled/running on Fedora Core 1 on a P4.  (I've not tried an -mm kernel yet, I'll try that soon.  I'm also thinking the stock gcc 3.3.2 may be problematic...?)
> 
>   The computer seems to crash once or twice a day -- always a hard freeze requiring that I press the reset button to reboot.  I have not found a pattern -- during this crash I had the Gnome desktop up and I was balancing my checkbook with GnuCash.
> 
>   The server has 1GB of RAM, so I originally enabled HIGHMEM (as the boot messages recommend), but this made the system even more unstable, freezing every couple of hours.  As you can see in the attached .config, HIGHMEM is no longer enabled (and was not when this crash occured).  Running memtest86 for several hours did not turn up any memory errors.
> 
>   It may be a problem with how I've configured my kernel, but I've tried to be careful.  Relevant information is below and attached.
> 
>   Kernel version:
> Linux papaya 2.6.2-rc3 #2 Sat Jan 31 22:15:02 EST 2004 i686 i686 i386 GNU/Linux
[..snip..]
I heard that the PREEMPT is causing problems, earlier, try without
CONFIG_PREEMPT

Could you please describe what the server is serving (router or
something else?)

I had that kind of problem with my router back in 2.6.0-test, I don't
know if it's fixed yet.
 
	Markus

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Oops with 2.6.2-rc3

[Jeremy Andrews]

[-- Attachment #1: Type: text/plain, Size: 4841 bytes --]

Hello,

  Attached is the text from a series of four Oops that ultimately locked up my computer.  This is a new server that I've been having trouble getting stable for the past week -- this is the first Oops I've managed to capture.  It's a 2.6.2-rc3 kernel compiled/running on Fedora Core 1 on a P4.  (I've not tried an -mm kernel yet, I'll try that soon.  I'm also thinking the stock gcc 3.3.2 may be problematic...?)

  The computer seems to crash once or twice a day -- always a hard freeze requiring that I press the reset button to reboot.  I have not found a pattern -- during this crash I had the Gnome desktop up and I was balancing my checkbook with GnuCash.

  The server has 1GB of RAM, so I originally enabled HIGHMEM (as the boot messages recommend), but this made the system even more unstable, freezing every couple of hours.  As you can see in the attached .config, HIGHMEM is no longer enabled (and was not when this crash occured).  Running memtest86 for several hours did not turn up any memory errors.

  It may be a problem with how I've configured my kernel, but I've tried to be careful.  Relevant information is below and attached.

  Kernel version:
Linux papaya 2.6.2-rc3 #2 Sat Jan 31 22:15:02 EST 2004 i686 i686 i386 GNU/Linux

  Software:
Gnu C                  3.3.2
Gnu make               3.79.1
util-linux             2.11y
mount                  2.11y
module-init-tools      2.4.25
e2fsprogs              1.34
jfsutils               1.1.3
reiserfsprogs          3.6.8
pcmcia-cs              3.1.31
quota-tools            3.06.
PPP                    2.4.1
nfs-utils              1.0.6
Linux C Library        2.3.2
Dynamic linker (ldd)   2.3.2
Procps                 2.0.17
Net-tools              1.60
Kbd                    1.08
Sh-utils               5.0
Modules Loaded         autofs ipt_REJECT ipt_state ip_conntrack iptable_filter ip_tables e100 hid

  Processor:
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Pentium(R) 4 CPU 2.80GHz
stepping        : 9
cpu MHz         : 2792.987
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips        : 5521.40

  Modules:
autofs 14080 0 - Live 0xf8aca000
ipt_REJECT 5760 1 - Live 0xf8ade000
ipt_state 1664 3 - Live 0xf8ac8000
ip_conntrack 26416 1 ipt_state, Live 0xf8ae8000
iptable_filter 2432 1 - Live 0xf88b1000
ip_tables 15616 3 ipt_REJECT,ipt_state,iptable_filter, Live 0xf8ac3000
e100 56328 0 - Live 0xf8acf000
hid 15744 0 - Live 0xf88b7000

  ioports:
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
0376-0376 : ide1
03c0-03df : vga+
03f8-03ff : serial
0cf8-0cff : PCI conf1
a000-afff : PCI Bus #01
  a800-a8ff : 0000:01:00.0
b400-b43f : 0000:02:08.0
  b400-b43f : e100
b800-b83f : 0000:02:02.0
  b800-b81f : EMU10K1
bc00-bc07 : 0000:02:02.1
c800-c81f : 0000:00:1f.3
cc00-cc1f : 0000:00:1d.0
d000-d01f : 0000:00:1d.1
d400-d41f : 0000:00:1d.2
d800-d81f : 0000:00:1d.3
dc00-dc0f : 0000:00:1f.2
  dc00-dc07 : ide2
  dc08-dc0f : ide3
e000-e003 : 0000:00:1f.2
e400-e407 : 0000:00:1f.2
e800-e803 : 0000:00:1f.2
  e802-e802 : ide2
ec00-ec07 : 0000:00:1f.2
  ec00-ec07 : ide2
ffa0-ffaf : 0000:00:1f.1
  ffa0-ffa7 : ide0
  ffa8-ffaf : ide1

  iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-3ff2fbff : System RAM
  00100000-003a4fb4 : Kernel code
  003a4fb5-004a25ff : Kernel data
3ff2fc00-3ff2ffff : ACPI Non-volatile Storage
3ff30000-3ff3ffff : ACPI Tables
3ff40000-3ffeffff : ACPI Non-volatile Storage
3fff0000-3fffffff : reserved
40000000-400003ff : 0000:00:1f.1
b6b00000-f6afffff : PCI Bus #01
  d0000000-dfffffff : 0000:01:00.1
  e0000000-efffffff : 0000:01:00.0
f8000000-fbffffff : 0000:00:00.0
fecf0000-fecf0fff : reserved
fed20000-fed9ffff : reserved
ff800000-ff8fffff : PCI Bus #01
  ff8e0000-ff8effff : 0000:01:00.1
  ff8f0000-ff8fffff : 0000:01:00.0
ff9f8000-ff9fbfff : 0000:02:02.2
ff9fe000-ff9fefff : 0000:02:08.0
  ff9fe000-ff9fefff : e100
ff9ff800-ff9fffff : 0000:02:02.2
  ff9ff800-ff9fffff : ohci1394
ffaff400-ffaff4ff : 0000:00:1f.5
  ffaff400-ffaff4ff : Intel ICH5 - Controller
ffaff800-ffaff9ff : 0000:00:1f.5
  ffaff800-ffaff9ff : Intel ICH5 - AC'97
ffaffc00-ffafffff : 0000:00:1d.7
  ffaffc00-ffafffff : ehci_hcd

-- 
 Jeremy Andrews    <mailto:jeremy@kerneltrap.org>
 PGP Key ID: 8F8B617A  http://www.kerneltrap.org/

[-- Attachment #2: oops.txt --]
[-- Type: text/plain, Size: 8012 bytes --]

Feb  2 08:35:35 papaya kernel: Unable to handle kernel paging request at virtual address 32616c36
Feb  2 08:35:35 papaya kernel:  printing eip:
Feb  2 08:35:35 papaya kernel: c015fef1
Feb  2 08:35:35 papaya kernel: *pde = 00000000
Feb  2 08:35:35 papaya kernel: Oops: 0002 [#1]
Feb  2 08:35:35 papaya kernel: CPU:    0
Feb  2 08:35:35 papaya kernel: EIP:    0060:[<c015fef1>]    Not tainted
Feb  2 08:35:35 papaya kernel: EFLAGS: 00010202
Feb  2 08:35:35 papaya kernel: EIP is at prune_dcache+0x32/0x1be
Feb  2 08:35:35 papaya kernel: eax: c041c9d0   ebx: ec48d280   ecx: ec6ed18c   edx: 32616c36
Feb  2 08:35:35 papaya kernel: esi: f7de4000   edi: f7de4000   ebp: 00000035   esp: f7de5e7c
Feb  2 08:35:35 papaya kernel: ds: 007b   es: 007b   ss: 0068
Feb  2 08:35:35 papaya kernel: Process kswapd0 (pid: 8, threadinfo=f7de4000 task=f7deacc0)
Feb  2 08:35:35 papaya kernel: Stack: f41a7280 f7de5e7c 00000080 f7de4000 00000187 f7ffeb20 c0160494 00000080 
Feb  2 08:35:35 papaya kernel:        c0138da9 00000080 000000d0 00020b0b 10673058 00000000 00000807 00000000 
Feb  2 08:35:35 papaya kernel:        000001d4 c041b834 00000001 ffffff16 c013a085 000001d4 000000d0 000000d0 
Feb  2 08:35:35 papaya kernel: Call Trace:
Feb  2 08:35:35 papaya kernel:  [<c0160494>] shrink_dcache_memory+0x23/0x25
Feb  2 08:35:35 papaya kernel:  [<c0138da9>] shrink_slab+0x11b/0x15e
Feb  2 08:35:35 papaya kernel:  [<c013a085>] balance_pgdat+0x1d6/0x1f0
Feb  2 08:35:35 papaya kernel:  [<c013a19b>] kswapd+0xfc/0xfe
Feb  2 08:35:35 papaya kernel:  [<c0117742>] autoremove_wake_function+0x0/0x4f
Feb  2 08:35:35 papaya kernel:  [<c0108c1e>] ret_from_fork+0x6/0x14
Feb  2 08:35:35 papaya kernel:  [<c0117742>] autoremove_wake_function+0x0/0x4f
Feb  2 08:35:35 papaya kernel:  [<c013a09f>] kswapd+0x0/0xfe
Feb  2 08:35:35 papaya kernel:  [<c0106db5>] kernel_thread_helper+0x5/0xb
Feb  2 08:35:35 papaya kernel: 
Feb  2 08:35:35 papaya kernel: Code: 89 02 89 49 04 89 09 a1 d4 c9 41 c0 0f 18 00 90 83 2d dc c9 
Feb  2 08:35:35 papaya kernel:  <6>note: kswapd0[8] exited with preempt_count 1
Feb  2 08:42:53 papaya kernel: Unable to handle kernel paging request at virtual address 32616c36
Feb  2 08:42:53 papaya kernel:  printing eip:
Feb  2 08:42:53 papaya kernel: c0160350
Feb  2 08:42:53 papaya kernel: *pde = 00000000
Feb  2 08:42:53 papaya kernel: Oops: 0000 [#2]
Feb  2 08:42:53 papaya kernel: CPU:    0
Feb  2 08:42:53 papaya kernel: EIP:    0060:[<c0160350>]    Not tainted
Feb  2 08:42:53 papaya kernel: EFLAGS: 00210246
Feb  2 08:42:53 papaya kernel: EIP is at select_parent+0x57/0xb4
Feb  2 08:42:53 papaya kernel: eax: 32616c36   ebx: c35df880   ecx: c35df88c   edx: c35df58c
Feb  2 08:42:53 papaya kernel: esi: c35df994   edi: e8c17980   ebp: e8c1799c   esp: eb6dff28
Feb  2 08:42:53 papaya kernel: ds: 007b   es: 007b   ss: 0068
Feb  2 08:42:53 papaya kernel: Process rm (pid: 588, threadinfo=eb6de000 task=da74a6a0)
Feb  2 08:42:53 papaya kernel: Stack: 00000000 e8c17980 e8c17980 ccfe9600 eb6dff80 c01603bd e8c17980 eb6de000 
Feb  2 08:42:53 papaya kernel:        c0158969 e8c17980 e8c17980 e8c17980 c0158a41 e8c17980 00000003 00000000 
Feb  2 08:42:53 papaya kernel:        e8c17980 e82ea000 e8c17980 c0158c61 ccfe9600 e8c17980 ee672a80 f7ff4e00 
Feb  2 08:42:53 papaya kernel: Call Trace:
Feb  2 08:42:53 papaya kernel:  [<c01603bd>] shrink_dcache_parent+0x10/0x23
Feb  2 08:42:53 papaya kernel:  [<c0158969>] d_unhash+0x3e/0xa7
Feb  2 08:42:53 papaya kernel:  [<c0158a41>] vfs_rmdir+0x6f/0x1a4
Feb  2 08:42:53 papaya kernel:  [<c0158c61>] sys_rmdir+0xeb/0x104
Feb  2 08:42:53 papaya kernel:  [<c0108cf5>] sysenter_past_esp+0x52/0x71
Feb  2 08:42:53 papaya kernel: 
Feb  2 08:42:53 papaya kernel: Code: 8b 10 89 4a 04 89 53 0c 89 41 04 89 08 83 05 dc c9 41 c0 01 
Feb  2 08:42:53 papaya kernel:  <6>note: rm[588] exited with preempt_count 1
Feb  2 08:42:53 papaya kernel: bad: scheduling while atomic!
Feb  2 08:42:53 papaya kernel: Call Trace:
Feb  2 08:42:53 papaya kernel:  [<c0116181>] schedule+0x580/0x585
Feb  2 08:42:53 papaya kernel:  [<c013b74d>] unmap_page_range+0x43/0x69
Feb  2 08:42:53 papaya kernel:  [<c013b923>] unmap_vmas+0x1b0/0x208
Feb  2 08:42:53 papaya kernel:  [<c013f471>] exit_mmap+0x7c/0x190
Feb  2 08:42:53 papaya kernel:  [<c01179ce>] mmput+0x66/0xb5
Feb  2 08:42:53 papaya kernel:  [<c011b75a>] do_exit+0x158/0x412
Feb  2 08:42:53 papaya kernel:  [<c011422e>] do_page_fault+0x0/0x50c
Feb  2 08:42:53 papaya kernel:  [<c0109548>] do_divide_error+0x0/0xfa
Feb  2 08:42:53 papaya kernel:  [<c0114406>] do_page_fault+0x1d8/0x50c
Feb  2 08:42:53 papaya kernel:  [<c014b165>] wake_up_buffer+0xf/0x26
Feb  2 08:42:53 papaya kernel:  [<c0188437>] do_get_write_access+0x2bd/0x5d6
Feb  2 08:42:53 papaya kernel:  [<c01629e9>] update_atime+0x92/0xd5
Feb  2 08:42:53 papaya kernel:  [<c011422e>] do_page_fault+0x0/0x50c
Feb  2 08:42:53 papaya kernel:  [<c0108ef1>] error_code+0x2d/0x38
Feb  2 08:42:53 papaya kernel:  [<c0160350>] select_parent+0x57/0xb4
Feb  2 08:42:53 papaya kernel:  [<c01603bd>] shrink_dcache_parent+0x10/0x23
Feb  2 08:42:53 papaya kernel:  [<c0158969>] d_unhash+0x3e/0xa7
Feb  2 08:42:53 papaya kernel:  [<c0158a41>] vfs_rmdir+0x6f/0x1a4
Feb  2 08:42:53 papaya kernel:  [<c0158c61>] sys_rmdir+0xeb/0x104
Feb  2 08:42:53 papaya kernel:  [<c0108cf5>] sysenter_past_esp+0x52/0x71
Feb  2 08:42:53 papaya kernel: 
Feb  2 08:43:34 papaya kernel: Unable to handle kernel paging request at virtual address 32616c36
Feb  2 08:43:34 papaya kernel:  printing eip:
Feb  2 08:43:34 papaya kernel: c0160350
Feb  2 08:43:34 papaya kernel: *pde = 00000000
Feb  2 08:43:34 papaya kernel: Oops: 0000 [#3]
Feb  2 08:43:34 papaya kernel: CPU:    0
Feb  2 08:43:34 papaya kernel: EIP:    0060:[<c0160350>]    Not tainted
Feb  2 08:43:34 papaya kernel: EFLAGS: 00210246
Feb  2 08:43:34 papaya kernel: EIP is at select_parent+0x57/0xb4
Feb  2 08:43:34 papaya kernel: eax: 32616c36   ebx: df678180   ecx: df67818c   edx: df67898c
Feb  2 08:43:34 papaya kernel: esi: dc573294   edi: c4115d80   ebp: c4115d9c   esp: cd9cbecc
Feb  2 08:43:34 papaya kernel: ds: 007b   es: 007b   ss: 0068
Feb  2 08:43:34 papaya kernel: Process gnome-terminal (pid: 17999, threadinfo=cd9ca000 task=e43fa6a0)
Feb  2 08:43:34 papaya kernel: Stack: 00000000 c4115d80 da74b2e0 da74b2e0 c4115d80 c01603bd c4115d80 c4115d80 
Feb  2 08:43:34 papaya kernel:        c017357f c4115d80 cd9ca000 c011a462 c4115d80 e43fac64 00000000 da74b2e0 
Feb  2 08:43:34 papaya kernel:        bffff430 00000000 00000222 c011bd54 da74b2e0 e43fac64 cd9cbfc4 00000011 
Feb  2 08:43:34 papaya kernel: Call Trace:
Feb  2 08:43:34 papaya kernel:  [<c01603bd>] shrink_dcache_parent+0x10/0x23
Feb  2 08:43:34 papaya kernel:  [<c017357f>] proc_pid_flush+0x17/0x2f
Feb  2 08:43:34 papaya kernel:  [<c011a462>] release_task+0x159/0x1f1
Feb  2 08:43:34 papaya kernel:  [<c011bd54>] wait_task_zombie+0x16c/0x1d3
Feb  2 08:43:34 papaya kernel:  [<c011c166>] sys_wait4+0x215/0x25c
Feb  2 08:43:34 papaya kernel:  [<c01161c9>] default_wake_function+0x0/0x12
Feb  2 08:43:34 papaya kernel:  [<c015c5e8>] sys_poll+0x242/0x28e
Feb  2 08:43:34 papaya kernel:  [<c01161c9>] default_wake_function+0x0/0x12
Feb  2 08:43:34 papaya kernel:  [<c011c1d4>] sys_waitpid+0x27/0x2b
Feb  2 08:43:34 papaya kernel:  [<c0108cf5>] sysenter_past_esp+0x52/0x71
Feb  2 08:43:34 papaya kernel: 
Feb  2 08:43:34 papaya kernel: Code: 8b 10 89 4a 04 89 53 0c 89 41 04 89 08 83 05 dc c9 41 c0 01 
Feb  2 08:43:34 papaya kernel:  <6>note: gnome-terminal[17999] exited with preempt_count 1
Feb  2 08:43:37 papaya ntpd[985]: time reset -0.350668 s
Feb  2 08:43:37 papaya ntpd[985]: synchronisation lost
Feb  2 08:44:08 papaya kernel: Unable to handle kernel paging request at virtual address 32616c36
Feb  2 08:44:08 papaya kernel:  printing eip:
Feb  2 08:44:08 papaya kernel: c0160350
Feb  2 08:44:08 papaya kernel: *pde = 00000000
Feb  2 08:44:08 papaya kernel: Oops: 0000 [#4]
Feb  2 08:44:08 papaya kernel: CPU:    0
Feb  2 08:44:08 papaya kernel: EIP:    0060:[<c0160350>]    Not tainted

[-- Attachment #3: config.txt --]
[-- Type: text/plain, Size: 23980 bytes --]

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HPET_TIMER is not set
# CONFIG_HPET_EMULATE_RTC is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_TOSHIBA is not set
CONFIG_I8K=m
CONFIG_MICROCODE=y
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y

#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
# CONFIG_ACPI is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set

#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_EATA=y
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX_CONFIG=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA23XX is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
CONFIG_IEEE1394=y

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set

#
# Device Drivers
#

#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=y

#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_CMP is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
# CONFIG_IP_NF_MATCH_IPRANGE is not set
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
# CONFIG_IP_NF_TARGET_CLASSIFY is not set
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=y
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_ETHERTAP=m

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
CONFIG_HP100=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
CONFIG_B44=m
# CONFIG_FORCEDETH is not set
CONFIG_DGRS=m
CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set

#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
CONFIG_NS83820=m
CONFIG_HAMACHI=m
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
# CONFIG_SIS190 is not set
CONFIG_SK98LIN=m
CONFIG_TIGON3=m

#
# Ethernet (10000 Mbit)
#
CONFIG_IXGB=m
# CONFIG_IXGB_NAPI is not set
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPPOE is not set
CONFIG_SLIP=m
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# Bluetooth support
#
# CONFIG_BT is not set

#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=2048

#
# Mice
#
CONFIG_BUSMOUSE=y
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set

#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_ATY128=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GX=y
# CONFIG_FB_ATY_XL_INIT is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set

#
# Logo configuration
#
# CONFIG_LOGO is not set

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_EMU10K1=y
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set

#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m

#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=y
# CONFIG_USB_BLUETOOTH_TTY is not set
CONFIG_USB_MIDI=y
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_TEST is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_TEST is not set

#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y

[-- Attachment #4: dmesg.txt --]
[-- Type: text/plain, Size: 11840 bytes --]

Linux version 2.6.2-rc3 (jandrews@papaya) (gcc version 3.3.2 20031022 (Red Hat Linux 3.3.2-1)) #2 Sat Jan 31 22:15:02 EST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ff2fc00 (usable)
 BIOS-e820: 000000003ff2fc00 - 000000003ff30000 (ACPI NVS)
 BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
 BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
 BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
On node 0 totalpages: 229376
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
Building zonelist for node : 0
Kernel command line: ro root=/dev/hde1
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 2792.987 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 903528k/917504k available (2707k kernel code, 13192k reserved, 1013k data, 136k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5521.40 BogoMIPS
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU:     After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU:     After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/24d0] at 0000:00:1f.0
PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 10 for device 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.2
PCI: Sharing IRQ 10 with 0000:02:02.2
IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com>
ikconfig 0.7 with /proc/config*
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
Initializing Cryptographic API
pty: 2048 Unix98 ptys configured
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] Initialized r128 2.5.0 20030725 on minor 0
[drm] Initialized radeon 1.9.0 20020828 on minor 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 5.2.20-k1
Copyright (c) 1999-2003 Intel Corporation.
Linux video capture interface: v1.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
PCI: Found IRQ 10 for device 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.2
PCI: Sharing IRQ 10 with 0000:02:02.2
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hdc: PIONEER DVD-RW DVR-106D, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ICH5-SATA: IDE controller at PCI slot 0000:00:1f.2
PCI: Found IRQ 10 for device 0000:00:1f.2
PCI: Sharing IRQ 10 with 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:02:02.2
ICH5-SATA: chipset revision 2
ICH5-SATA: 100% native mode on irq 10
    ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdg:pio, hdh:pio
hde: Maxtor 6Y200M0, ATA DISK drive
hdf: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
hdf: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
ide2 at 0xec00-0xec07,0xe802 on irq 10
hde: max request size: 1024KiB
irq 10: nobody cared!
Call Trace:
 [<c010a527>] __report_bad_irq+0x2a/0x8b
 [<c010a611>] note_interrupt+0x6f/0x9f
 [<c010a8b3>] do_IRQ+0x136/0x162
 [<c0108eb4>] common_interrupt+0x18/0x20
 [<c011d0c4>] do_softirq+0x40/0x94
 [<c010a890>] do_IRQ+0x113/0x162
 [<c0105000>] rest_init+0x0/0x5d
 [<c0108eb4>] common_interrupt+0x18/0x20
 [<c0105000>] rest_init+0x0/0x5d
 [<c011007b>] nexgen_identify+0x23/0x44
 [<c0106ba1>] default_idle+0x23/0x26
 [<c0106bff>] cpu_idle+0x2c/0x35
 [<c04a665d>] start_kernel+0x14f/0x15b
 [<c04a63ea>] unknown_bootoption+0x0/0xfd

handlers:
[<c0268c73>] (ide_intr+0x0/0x18e)
Disabling IRQ #10
hde: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63, UDMA(33)
irq 10: nobody cared!
Call Trace:
 [<c010a527>] __report_bad_irq+0x2a/0x8b
 [<c010a611>] note_interrupt+0x6f/0x9f
 [<c010a8b3>] do_IRQ+0x136/0x162
 [<c0108eb4>] common_interrupt+0x18/0x20
 [<c011d0c4>] do_softirq+0x40/0x94
 [<c010a890>] do_IRQ+0x113/0x162
 [<c0108eb4>] common_interrupt+0x18/0x20
 [<c0268eef>] ide_do_drive_cmd+0xd5/0x132
 [<c026d5a6>] ide_diag_taskfile+0xac/0xd1
 [<c026d5f2>] ide_raw_taskfile+0x27/0x2b
 [<c0274135>] write_cache+0x71/0x90
 [<c026ca95>] task_no_data_intr+0x0/0x95
 [<c027b678>] __ide_dma_verbose+0xa1/0x18a
 [<c0274b7c>] idedisk_setup+0x30c/0x3b6
 [<c0274f3d>] idedisk_attach+0xa0/0x1ae
 [<c0270d44>] ata_attach+0xdb/0x1a2
 [<c0271c16>] ide_register_driver+0x105/0x118
 [<c027505a>] idedisk_init+0xf/0x15
 [<c04a66a0>] do_initcalls+0x27/0x92
 [<c0128294>] init_workqueues+0xf/0x27
 [<c01050bc>] init+0x30/0x134
 [<c010508c>] init+0x0/0x134
 [<c0106db5>] kernel_thread_helper+0x5/0xb

handlers:
[<c0268c73>] (ide_intr+0x0/0x18e)
Disabling IRQ #10
 hde: hde1 hde2 hde3 hde4 < hde5 hde6 hde7 hde8 >
hdc: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ohci1394: $Rev: 1097 $ Ben Collins <bcollins@debian.org>
PCI: Found IRQ 10 for device 0000:02:02.2
PCI: Sharing IRQ 10 with 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:00:1f.2
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[ff9ff800-ff9fffff]  Max Packet=[2048]
PCI: Found IRQ 9 for device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 9, pci mem f8825c00
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
drivers/usb/core/usb.c: registered new driver audio
drivers/usb/class/audio.c: v1.0.0:USB Audio Class driver
drivers/usb/core/usb.c: registered new driver midi
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC).
request_module: failed /sbin/modprobe -- snd-card-0. error = -16
PCI: Found IRQ 3 for device 0000:00:1f.5
PCI: Sharing IRQ 3 with 0000:00:1f.3
PCI: Sharing IRQ 3 with 0000:02:02.0
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c0151029510]
intel8x0: clocking to 48000
PCI: Found IRQ 3 for device 0000:02:02.0
PCI: Sharing IRQ 3 with 0000:00:1f.3
PCI: Sharing IRQ 3 with 0000:00:1f.5
ALSA device list:
  #0: Intel ICH5 at 0xffaff800, irq 3
  #1: Sound Blaster Audigy2 (rev.4) at 0xb800, irq 3
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 136k freed
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
EXT3 FS on hde1, internal journal
Adding 4192924k swap on /dev/hde7.  Priority:-1 extents:1
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hde8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hde6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hde3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hde2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hde5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
microcode: error! Bad data in microcode data file
microcode: Error in the microcode data
kudzu: numerical sysctl 1 23 is obsolete.
request_module: failed /sbin/modprobe -- char-major-21-0. error = 256
kudzu: numerical sysctl 1 49 is obsolete.
Intel(R) PRO/100 Network Driver - version 2.3.30-k1
Copyright (c) 2003 Intel Corporation

PCI: Found IRQ 9 for device 0000:02:08.0
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
  Hardware receive checksums enabled

kudzu: numerical sysctl 1 49 is obsolete.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (7168 buckets, 57344 max) - 300 bytes per conntrack
e100: eth0 NIC Link is Up 100 Mbps Full duplex
request_module: failed /sbin/modprobe -- block-major-3-0. error = 256
request_module: failed /sbin/modprobe -- char-major-6-0. error = 256
request_module: failed /sbin/modprobe -- char-major-10-134. error = 256
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
spurious 8259A interrupt: IRQ7.

[-- Attachment #5: lspci.txt --]
[-- Type: text/plain, Size: 10707 bytes --]

00:00.0 Host bridge: Intel Corp. 82865G/PE/P Processor to I/O Controller (rev 02)
	Subsystem: Intel Corp. 82865G/PE/P Processor to I/O Controller
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [e4] #09 [0106]
	Capabilities: [a0] AGP version 3.0
		Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
		Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Intel Corp. 82865G/PE/P Processor to AGP Controller (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: ff800000-ff8fffff
	Prefetchable memory behind bridge: b6b00000-f6afffff
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

00:1d.0 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corp.: Unknown device 4c43
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 4: I/O ports at cc00 [size=32]

00:1d.1 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corp.: Unknown device 4c43
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 5
	Region 4: I/O ports at d000 [size=32]

00:1d.2 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corp.: Unknown device 4c43
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 10
	Region 4: I/O ports at d400 [size=32]

00:1d.3 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corp.: Unknown device 4c43
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 4: I/O ports at d800 [size=32]

00:1d.7 USB Controller: Intel Corp. 82801EB USB2 (rev 02) (prog-if 20 [EHCI])
	Subsystem: Intel Corp.: Unknown device 4c43
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin D routed to IRQ 9
	Region 0: Memory at ffaffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] #0a [20a0]

00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: ff900000-ff9fffff
	Prefetchable memory behind bridge: fff00000-000fffff
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:1f.1 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: Intel Corp.: Unknown device 4c43
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at <unassigned>
	Region 1: I/O ports at <unassigned>
	Region 2: I/O ports at <unassigned>
	Region 3: I/O ports at <unassigned>
	Region 4: I/O ports at ffa0 [size=16]
	Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]

00:1f.2 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Intel Corp.: Unknown device 4c43
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at ec00 [size=8]
	Region 1: I/O ports at e800 [size=4]
	Region 2: I/O ports at e400 [size=8]
	Region 3: I/O ports at e000 [size=4]
	Region 4: I/O ports at dc00 [size=16]

00:1f.3 SMBus: Intel Corp. 82801EB SMBus Controller (rev 02)
	Subsystem: Intel Corp.: Unknown device 4c43
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 3
	Region 4: I/O ports at c800 [size=32]

00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio Controller (rev 02)
	Subsystem: Intel Corp.: Unknown device e002
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 3
	Region 2: Memory at ffaff800 (32-bit, non-prefetchable) [size=512]
	Region 3: Memory at ffaff400 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4150 (prog-if 00 [VGA])
	Subsystem: PC Partner Limited: Unknown device 7c20
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min), cache line size 10
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
	Region 1: I/O ports at a800 [size=256]
	Region 2: Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]
	Expansion ROM at ff8c0000 [disabled] [size=128K]
	Capabilities: [58] AGP version 3.0
		Status: RQ=255 SBA+ 64bit- FW+ Rate=x1,x2
		Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none>
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.1 Display controller: ATI Technologies Inc: Unknown device 4170
	Subsystem: PC Partner Limited: Unknown device 7c21
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min), cache line size 10
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 1: Memory at ff8e0000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:02.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
	Subsystem: Creative Labs: Unknown device 2002
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (500ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 3
	Region 0: I/O ports at b800 [size=64]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:02.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 04)
	Subsystem: Creative Labs SB Audigy MIDI/Game Port
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Region 0: I/O ports at bc00 [size=8]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:02.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04) (prog-if 10 [OHCI])
	Subsystem: Creative Labs SB Audigy FireWire Port
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (500ns min, 1000ns max), cache line size 10
	Interrupt: pin B routed to IRQ 10
	Region 0: Memory at ff9ff800 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at ff9f8000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME+

02:08.0 Ethernet controller: Intel Corp. 82801EB (ICH5) PRO/100 VE Ethernet Controller (rev 01)
	Subsystem: Intel Corp.: Unknown device 303a
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 14000ns max), cache line size 10
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at ff9fe000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at b400 [size=64]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-