All of lore.kernel.org
 help / color / mirror / Atom feed
* 2.6.8-rc2-mm2
@ 2004-08-02  8:55 Andrew Morton
  2004-08-02  9:23 ` 2.6.8-rc2-mm2 Espen Fjellvær Olsen
                   ` (14 more replies)
  0 siblings, 15 replies; 55+ messages in thread
From: Andrew Morton @ 2004-08-02  8:55 UTC (permalink / raw)
  To: linux-kernel


ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc2/2.6.8-rc2-mm2/


- Some fairly significant changes to the RCU code.  Should address
  scheduling latency issues which we've seen in there.

- Various changes to the writeback code - mainly to support concurrent
  O_SYNC writers to the same file.  Also arrange for O_SYNC writes to sync
  only the part of the file which the caller actually wrote.  Database stuff.

- Added Con's staircase CPU scheduler.

  This will probably have to come out again because various people are still
  fiddling with the CPU scheduler.  But my feeling here is that the current
  1st-gen CPU scheduler has been tweaked as far as it can go and is still not
  100% right.  It is time to start thinking about a new design which addresses
  the requirements and current problems by algorithmic means rather than by
  tweaking.  Removing over 300 lines from the scheduler is a good sign.

  Feedback on this patch is sought.

- Added Rik's token-based load control patch.  The VM currently has pretty
  bad performance problems under heavy swapping loads and this patch speeds up
  simple tests most impressively.  People who care about these things: please
  test and measure.

- Tons of new fixes and cleanups and updates to various things as usual.

- Again, 2.6.8 is close, so if people have critical fixes in here which
  need flushing out, please ping me.



Changes since 2.6.8-rc2-mm1:


 linus.patch
 bk-acpi.patch
 bk-alsa.patch
 bk-dma-declare-coherent-memory.patch
 bk-cpufreq.patch
 bk-drm.patch
 bk-ieee1394.patch
 bk-input.patch
 bk-libata.patch
 bk-netdev.patch
 bk-ntfs.patch
 bk-pci.patch
 bk-pnp.patch
 bk-power.patch
 bk-scsi.patch
 bk-usb.patch

 Latest versions of external trees

-fixes-for-rcu_offline_cpu-rcu_move_batch-268-rc2.patch
-unix98-pty-indices-leak.patch
-sched-initialize-sched-domain-table.patch
-compat_clock_getres-shouldnt-return-efault-if-res-==-null.patch
-bio-page-refcounting-fix.patch
-bk-acpi-x86_cpu_to_apicid-fix.patch
-ppc64-page-align-emergency-stack-2.patch
-ppc64-remove-multiple-irq-optimisation.patch
-ppc64-cpu-hotplug-fix.patch
-ppc64-whitespace-cleanup-in-promc.patch
-ppc64-hvcs-driver.patch
-ppc64-smt-bugfix.patch
-ppc32-fix-ppc44x-early-uart-setup.patch
-ppc32-export-some-dma-api-symbols.patch
-ppc32-fix-comment-in-arch-ppc-platforms-pmac_pcic.patch
-enable-suspend-resuming-of-e1000.patch
-i810_audio-mmio-support.patch
-i810_audio-mmio-support-2.patch
-ia64-ptrace-fix-fix.patch
-possible-buglet-in-drivers-input-joystick-tmdcc.patch
-gcc35-advansys.c.patch
-gcc35-arlan.h.patch
-gcc35-fore200e.c.patch
-gcc35-index.html.patch
-gcc35-ip6_fib.c.patch
-gcc35-iphase.h.patch
-gcc35-irttp.h.patch
-gcc35-netrom.h.patch
-gcc35-pppoe.c.patch
-gcc35-usblp.c.patch
-gcc35-xfrm6_state.c.patch
-fix-rivafbs-nv_arch_-cleanup-debug-backlight-control-on-ppc.patch
-fix-rivafbs-nv_arch_-cleanup-debug-backlight-control-on-ppc-fix.patch
-hugetlbfs-vm_pgoff-bugs.patch
-unknown-symbol-in-drivers-scsi-pcmcia-fdomain_csko.patch
-fix-double-reset-in-aic7xxx-driver.patch
-v850-define-find_first_bit.patch
-radeonfb-64-bit-fix.patch
-net-sunrpc-xprtc-gcc341-inlining-fix.patch
-switch-sgc-to-standard-jiffies-converters.patch
-sign-fix-in-swapfilec.patch
-a-trivial-patch-for-removing-unnecessary-comment-in-mm-filemapc.patch
-fix-for-buffer-limit-for-long-in-sysctlc.patch
-ipmi_msghandler-module-load-failure-fix.patch
-remove-scripts-mkconfigs.patch
-267-msi-x-update.patch
-fix-readahead-breakage-for-sequential-after-random-reads.patch
-update-mailing-list-for-osst.patch
-fix-aic-for-db4.patch
-m68k-68060-errata-i14.patch
-m68k-ifpsp060.patch
-m68k-sparse-missing-void.patch
-m68k-sparse-if-vs-ifdef.patch
-m68k-sparse-void-return.patch
-m68k-sparse-extern.patch
-m68k-sparse-inline.patch
-dsp56k-sparse-const.patch
-m68k-sparse-floating-point.patch
-dnfb-sparse-struct-init.patch
-amifb-sparse-=.patch
-m68k-hardirqh.patch
-dmasound-paths.patch
-m68k-bitops.patch
-m68k-checksum-include.patch
-m68k-pgalloc-fixup.patch
-m68k-maintainership.patch
-depends-on-pci-multi-tech-synclink-applicom-serial.patch
-pci-warnings-moxa-serial.patch
-pci-warnings-specialix-serial.patch
-depends-on-pci-via686a-i2c.patch
-depends-on-pci-dma-api-ieee1394-core-and-sbp-2.patch
-depends-on-pci-fritzpci-pciv2-pnp-and-hysdn.patch
-pci-warnings-hisax-isdn.patch
-depends-on-pci-guillemot-maxi-radio-fm-2000.patch
-depends-on-pci-technisat-skystar2-pci.patch
-depends-on-pci-dma-api-cisco-aironet-34x-35x-4500-4800.patch
-depends-on-pci-toshiba-and-via-fir.patch
-depends-on-pci-matrox-1-wire.patch
-dallas-1-wire-delayh.patch
-linux-mmzoneh-const.patch
-cirrusfb-update-for-amiga-zorro.patch
-page_cache_readahead-unused-variable.patch
-remove-faulty-__inits-from-drivers-video-fbmemc-fwd.patch
-export-all-functions-in-lib-stringc.patch
-hlist_for_each_safe-cleanup.patch
-front-buttons-wouldnt-mute-ess-maestro.patch
-ipv6-routec-gcc-341-fix-inline.patch
-config-file-for-laptop-mode.patch
-add-documentation-about-proc-sys-vm-laptop_mode-to-various-docs.patch
-automatically-disable-laptop-mode-when-battery-almost-runs-out.patch
-ppc32-snd-powermac-requires-i2c.patch
-ext2_readdir-retval-fix.patch
-ncpfs-setattr-retval-fix.patch
-recommend-noapic-when-timer-via-ioapic-fails.patch
-s390-core-changes.patch
-s390-zfcp-host-adapter.patch
-s390-network-driver-changes.patch
-dvb-major-number.patch
-selinux-fix-clearing-of-new-personality-bit-on-security-transitions.patch
-lost-error-code-in-rescan_partitions.patch
-trivial-doc-patch-for-partitions.patch
-rename-config_pci_use_vector-to-config_pci_msi.patch
-fix-bogus-ioctl-return-in-mtrr.patch
-remove-boot98.patch
-writepages-drops-bh-on-not-uptodate-page.patch
-critical-x86-64-patches-for-268rc2.patch

 Merged

-sysfs-leaves-mount.patch
-sysfs-leaves-dir.patch
-sysfs-leaves-file.patch
-sysfs-leaves-bin.patch
-sysfs-leaves-symlink.patch
-sysfs-leaves-misc.patch
+sysfs-backing-store-add-sysfs_dirent-to-sysfs-dentry.patch
+sysfs-backing-store-use-sysfs_dirent-tree-for-readdir-etc.patch
+sysfs-backing-store-free-sysfs_dirent-on-file-removal.patch
+sysfs-backing-store-change-sysfs_file_operations.patch
+sysfs-backing-store-stop-pinning-dentries-inodes-for-leaves.patch

 Updated backing-store-for-sysfs patches

+sched-use-for_each_cpu.patch

 CPU hotunplug fix

+fix-bsd-accounting-cross-platform-compatibility.patch

 BSD accounting format fix

+mm-swsusp-make-sure-we-do-not-return-to-userspace-where-image-is-on-disk.patch
+mm-swsusp-copy_page-is-harmfull.patch

 swsusp fixes

+ppc64-__make_room-warning-fix.patch
+ppc64-fix-off-by-one-in-mem_init.patch
+ppc64-struct-pci_controller-cleanup.patch
+ppc64-isa-device-tree-node-refcount-fix.patch
+ppc64-fix-hotplug-irq-migration-code.patch
+ppc64-fix-cpu_up-race.patch
+ppc64-improve-slb-reload.patch
+ppc64-remove-include-processorh-from-div64s.patch

 ppc64 updates

+ppc32-support-for-mpc8560-cpu-and-boards.patch
+ppc32-support-for-mpc8555-cpu-and-board.patch

 ppc32 updates

+dev-mem-restriction-patch.patch

 Restrict the memory which may be accessed via /dev/mem (x86 only).

 Disable /dev/kmem writes altogether.

+sched-merge-fix.patch

 CPU scheduler fix

+sched-isolated-sched-domains.patch
+sched-isolated-sched-domains-fix.patch
+create-cpu_sibling_map-for-ppc64.patch
+create-cpu_sibling_map-for-ppc64-fix.patch
+sched-adjust-p4-per-cpu-gain.patch

 CPU scheduler updates

+sysctl-tunable-for-flexmmap.patch
+legacy_va_layout-docs.patch

 Create /proc/sys/vm/legacy_va_layout - it switches the mmap layout back to
 the old version, system-wide.

+packet-remove-warning.patch
+packet-door-unlock.patch
+pkt_lock_door-warning-fix.patch
+trivial-cdrw-packet-writing-doc-update.patch
+simplified-request-size-handling-in-cdrw-packet-writing.patch
+fix-setting-of-maximum-read-speed-in-cdrw-packet-writing.patch

 Packet driver updates

+uml-remove-a-group-of-unused-bh-functions.patch

 UML cleanup

+bio_copy_user-cleanups.patch

 Fix BIO copy-to-userspace handling

+journal_clean_checkpoint_list-latency-fix-fix.patch

 Fix the fix for recuding latency in JBD.

+e1000-inlining-fix.patch

 gcc-3.5 build fix

+msi-stop-using-dev-bus-ops-directly-in-msic.patch
+msi-msi-msi-x-api-updates.patch
+rename-config_pci_use_vector-to-config_pci_msi.patch

 MSI updates

+signal-race-fix-s390-fix.patch
+signal-race-fix-x86_64-fix.patch
+ppc-signal-handling-fixes.patch
+signal-race-fixes-sparc-sparc64.patch
+signal-race-fixes-ppc64.patch

 Update various architectures for the signal handling race fix.

+i2o-resync-with-post-266-changes.patch
+i2o-resync-with-post-266-changes-2.patch

 Forward-port the 2.6.6->current i2o changes into the i2o driver rewrite.

+make-shrinker_sem-an-rwsem.patch

 Concurrent slab shrinking in the VM

+vlan-support-for-3c59x-3c90x.patch

 Add vlan support to 3c59x.c

+add-support-for-innovision-dm-8401h.patch

 More IDE chip support

+break-out-zone-free-list-initialization.patch

 Split up some mm init code for future work

+fbcon-differentiate-bits_per_pixel-from-color-depth.patch
+fbcon-differentiate-bits_per_pixel-from-color-depth-fixup.patch
+fbcon-differentiate-bits_per_pixel-from-color-depth-export.patch
+fbdev-set-color-fields-correctly.patch
+fbdev-attn-maintainers-set-correct-hardware-capabilities.patch
+rivafb-do-not-tap-vga-ports-if-not-x86.patch
+i810fb-fixes.patch
+i810fb-fixes-2.patch

 Framebuffer updates

+268-rc2-mm1-link-errors.patch

 Fix bogus detection of undefined symbols

+drm-optimisation.patch

 DRM cleanups/speedups

+maintainers-update.patch

 macro has moved.

+fdomain-isa-fixup.patch

 Fix the fdomain driver build

+net-smc9194c-fix-inline-compile-errors-fwd.patch
+net-hamachic-remove-bogus-inline-at-function-prototype.patch
+scsi-qla2xxx-fix-inline-compile-errors.patch
+net-rrunnerc-fix-inline-compile-error.patch
+istallion-remove-inlines.patch
+mxserc-fix-inlines-fwd.patch
+radio-maestroc-remove-an-inline-fwd.patch
+netfilter-ip_nat_snmp_basicc-fix-inlines-fwd.patch
+net-tulip-dmfec-fix-inline-compile-errors-fwd.patch
+fix-inlining-errors-in-drivers-scsi-aic7xxx-aic79xx_osmc.patch
+fix-inline-related-gcc-34-build-failures-in.patch

 More attempts to recover from the gcc-3.4 disaster.

+modular-swim3.patch
+modular-anscd.patch

 Fix a couple of drivers for modular builds

+jffs2_compression_options-fix.patch

 jffs2 fix

+ppc8xx-maintainer-patch.patch

 MAINTAINER update

+ext2_readdir-filp-f_pos-fix.patch

 Fix f_pos handling in ext2_readdir()

+do_general_protection-doesnt-disable-irq.patch

 Remvoe unneeded local IRQ enabling

+jbd-jh-unmapping-race-fix.patch

 JBD race fix.

+nfs4-oops-fixes.patch

 nfsv4 oops fixes

+proc_pid_cmdline-race-fix.patch

 Fix race accessing /porc/pid/cmdline

+support-for-exar-xr17c158-octal-uart.patch

 Serial driver support

+dvb-errno-removal.patch

 Fix DVB build

+x86-64-merge-for-268rc2-mm1.patch

 Big x86_64 udpate

+ia64-swiotlb-fixes.patch

 Fix bugs in IA64 swiotlb code.

+documentation-fix-for-nmi-watchdog.patch

 NMI documentation fix

+hpet-copyrights-cleanup.patch

 Fix copyrights in HPET driver

+remove-outdated-reference-to-documentation-arm-sa1100-pcmcia-fwd.patch
+canonically-reference-files-in-documentation-code-comments-part.patch

 Fox references to Documentation files

+altix-system-controller-communication-driver.patch
+snsc-build-fix.patch

 SGI Altix system controller communication support

+move-duplicate-bug-and-warn_on-bits-to-asm-generic.patch

 Consolidate some debug macros

+fix-con_buf_size-usage.patch

 CON_BUF_SIZE fix

+vprintk-support.patch
+vprintk-for-ext2-errors.patch
+vprintk-for-ext3-errors.patch

 Add vprintk(), use it in ext2 and ext3.

+remove-symbol_is.patch

 Remove unused symbol_is()

+prio_tree-kill-vma_prio_tree_init.patch
+prio_tree-iterator-vma_prio_tree_next-cleanup.patch

 prio-tree cleanups

+rcu-cpu-offline-cleanup.patch
+rcu-rcu-cpu-offline-fix.patch
+rcu-low-latency-rcu.patch

 RCU updates.

+alpha-print-the-symbol-of-pc-and-ra-during-oops.patch

 Make alpha oopses more friendly.

+staircase-cpu-scheduler-268-rc2-mm1.patch

 Staircase scheduler.

+first-next_cpu-returns-values-nr_cpus.patch
+first-next_cpu-returns-values-nr_cpus-fix.patch

 Fix __first_cpu() and __next_cpu()

+add-support-for-it8212-ide-controllers.patch

 More IDE device support

+drivers-net-wan-cycx_x25c189-warning-conflicting-types.patch

 Warning fix

+watchdog-fix-warning-defined-but-not-used.patch

 Wanring fix

+fix-pci-access-mode-dependences-in-arch-i386-kconfig.patch

 Kconfig dependency fix

+drivers-block-ubc-6.patch
+ub-warning-fixes.patch

 Add simple USB block driver.  No documentation so you're on your own with
 this one.

+i386-hotplug-cpu.patch

 Add i386 CPU hotplug support. No documentation so you're on your own with
 this one.

+token-based-thrashing-control.patch
+token-based-thrashing-control-remove-debug.patch

 VM load control.

+writeback-page-range-hint.patch
+fix-writeback-page-range-to-use-exact-limits.patch
+mpage-writepages-range-limit-fix.patch
+filemap_fdatawrite-range-interface.patch
+concurrent-o_sync-write-support.patch

 O_SYNC writeback speedups.

+nfsd-force-server-side-tcp-when-nfsv4-enabled.patch
+nfsd-nfsd-is-missing-a-put_group_info-in-the-auth_null.patch
+nfsd-make-cache_init-initialize-reference-count-to-1.patch
+nfsd-simplify-auth_domain_lookup.patch
+nfsd-fix-ip_map-cache-reference-count-leak.patch
+nfsd-basic-v4-acl-definitions.patch
+nfsd-posix-nfsv4-acl-translation-for-nfsd.patch
+nfsd-acl-support-for-the-nfsv4-server.patch

 kNFSD update

+bridge-build-fix.patch

 Fix the build.





All 388 patches:


linus.patch

sched-use-for_each_cpu.patch
  sched: use for_each_cpu

fix-bsd-accounting-cross-platform-compatibility.patch
  Fix BSD accounting cross-platform compatibility

sysfs-backing-store-add-sysfs_dirent-to-sysfs-dentry.patch
  sysfs backing store: add sysfs_dirent to sysfs dentry

sysfs-backing-store-use-sysfs_dirent-tree-for-readdir-etc.patch
  sysfs backing store: use sysfs_dirent tree for ->readdir etc.

sysfs-backing-store-free-sysfs_dirent-on-file-removal.patch
  sysfs backing store: free sysfs_dirent on file removal

sysfs-backing-store-change-sysfs_file_operations.patch
  sysfs backing store: change sysfs_file_operations

sysfs-backing-store-stop-pinning-dentries-inodes-for-leaves.patch
  sysfs backing store: stop pinning dentries & inodes for leaves

bk-acpi.patch

bk-alsa.patch

bk-dma-declare-coherent-memory.patch

bk-cpufreq.patch

bk-drm.patch

bk-ieee1394.patch

bk-input.patch

bk-libata.patch

bk-netdev.patch

bk-ntfs.patch

bk-pci.patch

bk-pnp.patch

bk-power.patch

bk-scsi.patch

bk-usb.patch

mm.patch
  add -mmN to EXTRAVERSION

longhaul-fix.patch
  longhaul build fix

bk-netdev-axnet_cs-fix.patch
  bk-netdev-axnet_cs-fix

bk-netdev-hp-plus-fix.patch
  bk-netdev-hp-plus-fix

bk-power-x86_64-fix.patch
  bk-power x86_64 fixes

mm-swsusp-make-sure-we-do-not-return-to-userspace-where-image-is-on-disk.patch
  -mm swsusp: make sure we do not return to userspace where image is on disk

mm-swsusp-copy_page-is-harmfull.patch
  -mm swsusp: copy_page is harmfull

nmi-trigger-switch-support-for-debuggingupdated.patch
  NMI trigger switch support for debugging(updated)

nmi-trigger-switch-support-for-debuggingupdated-fix.patch
  nmi-trigger-switch-support-for-debuggingupdated-fix

make-i386-die-more-resilient-against-recursive-errors.patch
  Make i386 die() more resilient against recursive errors

kgdb-ga.patch
  kgdb stub for ia32 (George Anzinger's one)
  kgdbL warning fix
  kgdb buffer overflow fix
  kgdbL warning fix
  kgdb: CONFIG_DEBUG_INFO fix
  x86_64 fixes
  correct kgdb.txt Documentation link (against  2.6.1-rc1-mm2)
  kgdb: fix for recent gcc
  kgdb warning fixes
  THREAD_SIZE fixes for kgdb
  Fix stack overflow test for non-8k stacks
  kgdb-ga.patch fix for i386 single-step into sysenter
  fix TRAP_BAD_SYSCALL_EXITS on i386
  add TRAP_BAD_SYSCALL_EXITS config for i386

kgdboe-netpoll.patch
  kgdb-over-ethernet via netpoll
  kgdboe: fix configuration of MAC address

kgdb-x86_64-support.patch
  kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
  kgdb-x86_64-warning-fixes

kgdb-ia64-support.patch
  IA64 kgdb support
  ia64 kgdb repair and cleanup
  ia64 kgdb fix

kgdb-ia64-fixes.patch
  kgdb: ia64 fixes

make-tree_lock-an-rwlock.patch
  make mapping->tree_lock an rwlock

radix_tree_tag_set-atomic.patch
  Make radix_tree_tag_set/clear atomic wrt the tag

radix_tree_tag_set-only-needs-read_lock.patch
  radix_tree_tag_set only needs read_lock()

must-fix.patch
  must fix lists update
  must fix list update
  mustfix update

must-fix-update-5.patch
  must-fix update

mustfix-lists.patch
  mustfix lists

ppc64-__make_room-warning-fix.patch
  ppc64: __make_room() warning fix

ppc64-fix-off-by-one-in-mem_init.patch
  ppc64: fix off-by-one in mem_init()

ppc64-struct-pci_controller-cleanup.patch
  ppc64: struct pci_controller cleanup

ppc64-isa-device-tree-node-refcount-fix.patch
  ppc64: ISA device tree node refcount fix

ppc64-fix-ras-irq-handlers.patch
  ppc64: fix RAS irq handlers

ppc64-fix-hotplug-irq-migration-code.patch
  ppc64: fix hotplug irq migration code

ppc64-fix-cpu_up-race.patch
  ppc64: Fix cpu_up race

ppc64-improve-slb-reload.patch
  ppc64: improve SLB reload

ppc64-remove-include-processorh-from-div64s.patch
  ppc64: remove #include processor.h from div64.S

ppc32-support-for-mpc8560-cpu-and-boards.patch
  ppc32: Support for MPC8560 CPU and boards

ppc32-support-for-mpc8555-cpu-and-board.patch
  ppc32: support for MPC8555 CPU and board

ppc64-reloc_hide.patch

invalidate_inodes-speedup.patch
  invalidate_inodes speedup
  more invalidate_inodes speedup fixes

dev-mem-restriction-patch.patch
  /dev/mem restriction patch

get_user_pages-handle-VM_IO.patch
  fix get_user_pages() against mappings of /dev/mem

fa311-mac-address-fix.patch
  wrong mac address with netgear FA311 ethernet card

pid_max-fix.patch
  Bug when setting pid_max > 32k

jbd-remove-livelock-avoidance.patch
  JBD: remove livelock avoidance code in journal_dirty_data()

journal_add_journal_head-debug.patch
  journal_add_journal_head-debug

list_del-debug.patch
  list_del debug check

oops-dump-preceding-code.patch
  i386 oops output: dump preceding code

lockmeter.patch
  lockmeter
  ia64 CONFIG_LOCKMETER fix

unplug-can-sleep.patch
  unplug functions can sleep

firestream-warnings.patch
  firestream warnings

ext3_rsv_cleanup.patch
  ext3 block reservation patch set -- ext3 preallocation cleanup

ext3_rsv_base.patch
  ext3 block reservation patch set -- ext3 block reservation
  ext3 reservations: fix performance regression
  ext3 block reservation patch set -- mount and ioctl feature
  ext3 block reservation patch set -- dynamically increase reservation window
  ext3 reservation ifdef cleanup patch
  ext3 reservation max window size check patch
  ext3 reservation file ioctl fix

ext3-reservation-default-on.patch
  ext3 reservation: default to on

ext3-lazy-discard-reservation-window-patch.patch
  ext3 lazy discard reservation window patch
  ext3 discard reservation in last iput fix patch
  Fix lazy reservation discard
  ext3 reservations: bad_inode fix
  ext3 reservation discard race fix

hugetlb_shm_group-sysctl-gid-0-fix.patch
  hugetlb_shm_group sysctl-gid-0-fix

really-ptrace-single-step-2.patch
  ptrace single-stepping fix

ipr-ppc64-depends.patch
  Make ipr.c require ppc

disk-barrier-core.patch
  disk barriers: core
  disk-barrier-core-tweaks

disk-barrier-ide.patch
  disk barriers: IDE
  disk-barrier-ide-symbol-expoprt
  disk-barrier ide warning fix

barrier-update.patch
  barrier update

barrier-flushing-fix.patch
  barrier flushing fix

disk-barrier-scsi.patch
  disk barriers: scsi

disk-barrier-dm.patch
  disk barriers: devicemapper

disk-barrier-md.patch
  disk barriers: MD

reiserfs-v3-barrier-support.patch
  reiserfs v3 barrier support
  reiserfs-v3-barrier-support-tweak

sync_dirty_buffer-retval.patch
  make sync_dirty_buffer() return something useful

ext3-barrier-support.patch
  ext3 barrier support

jbd-barrier-fallback-on-failure.patch
  jbd: barrier fallback on failure

ide-print-failed-opcode.patch
  ide: print failed opcode on IO errors
  From: Jens Axboe <axboe@suse.de>
  Subject: Re: ide errors in 7-rc1-mm1 and later

add-bh_eopnotsupp-for-testing.patch
  add BH_Eopnotsupp for testing async barrier failures

handle-async-barrier-failures.patch
  Handle async barrier failures

tty_io-hangup-locking.patch
  tty_io.c hangup locking

perfctr-core.patch
  From: Mikael Pettersson <mikpe@csd.uu.se>
  Subject: [PATCH][1/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: core
  CONFIG_PERFCTR=n build fix
  From: Mikael Pettersson <mikpe@csd.uu.se>
  Subject: [PATCH][6/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: misc

perfctr-i386.patch
  From: Mikael Pettersson <mikpe@csd.uu.se>
  Subject: [PATCH][2/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: i386
  perfctr #if/#ifdef cleanup
  perfctr Dothan support
  perfctr x86_tests build fix

perfctr-x86-init-bug.patch
  perfctr x86 init bug

perfctr-k8-fix-for-internal-benchmarking-code.patch
  perfctr: K8 fix for internal benchmarking code

perfctr-x86_64.patch
  From: Mikael Pettersson <mikpe@csd.uu.se>
  Subject: [PATCH][3/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: x86_64

perfctr-ppc.patch
  From: Mikael Pettersson <mikpe@csd.uu.se>
  Subject: [PATCH][4/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: PowerPC
  perfctr ppc32 update
  perfctr update 4/6: PPC32 cleanups

perfctr-ppc32-buglet-fix.patch
  perfctr ppc32 buglet fix

perfctr-virtualised-counters.patch
  From: Mikael Pettersson <mikpe@csd.uu.se>
  Subject: [PATCH][5/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: virtualised counters
  perfctr update 6/6: misc minor cleanups
  perfctr update 3/6: __user annotations
  perfctr-cpus_complement-fix
  perfctr cpumask cleanup

perfctr-ifdef-cleanup.patch
  perfctr ifdef cleanup

perfctr-update-2-6-kconfig-related-updates.patch
  perfctr update 2/6: Kconfig-related updates

perfctr-update-5-6-reduce-stack-usage.patch
  perfctr update 5/6: reduce stack usage

perfctr-low-level-documentation.patch
  perfctr low-level documentation

perfctr-documentation-update.patch
  perfctr documentation update

perfctr-inheritance-1-3-driver-updates.patch
  perfctr inheritance 1/3: driver updates

perfctr-inheritance-illegal-sleep-bug.patch
  perfctr inheritance illegal sleep bug

perfctr-inheritance-2-3-kernel-updates.patch
  perfctr inheritance 2/3: kernel updates

perfctr-inheritance-3-3-documentation-updates.patch
  perfctr inheritance 3/3: documentation updates

ext3-online-resize-patch.patch
  ext3: online resizing

ext3-online-resize-warning-fix.patch
  ext3-online-resize-warning-fix

sched-clean-init-idle.patch
  sched: cleanup init_idle()

sched-clean-fork.patch
  sched: cleanup, improve sched <=> fork APIs

sched-clean-fork-rename-wake_up_new_process-wake_up_new_task.patch
  sched: rename wake_up_new_process -> wake_up_new_task

kernelthread-idle-fix-2.patch
  kernel thread idle fix

sched-misc-cleanups-2.patch
  sched: misc cleanups #2

sched-unlikely-rt_task.patch
  sched: make rt_task unlikely

sched-misc.patch
  sched: sched misc changes

sched-misc-fix-rt.patch
  sched: fix RT scheduling & interactivity estimator

sched-no-balance-clone.patch
  sched: disable balance on clone

sched-remove-balance-clone.patch
  sched: remove balance on clone

sched-fork-hotplug-cleanuppatch.patch
  sched: fork hotplug hanling cleanup

sched-consolidate-sched-domains.patch
  sched: consolidate sched domains

sched-consolidate-domains-fix.patch
  sched: fix for sched-consolidate-domains

sched-consolidate-domains-fix-2.patch
  another sched consolidate domains fix

sched-domain-node-span-4.patch
  sched: limit cpuspan of node scheduler domains

sched-merge-fix.patch
  sched: merge fix

sched-domain-node-span-4-warning-fix.patch
  sched-domain-node-span-4-warning-fix

sched-isolated-sched-domains.patch
  sched: isolated sched domains

sched-isolated-sched-domains-fix.patch
  sched-isolated-sched-domains-fix

create-cpu_sibling_map-for-ppc64.patch
  Create cpu_sibling_map for PPC64

create-cpu_sibling_map-for-ppc64-fix.patch
  create-cpu_sibling_map-for-ppc64-fix

sched-adjust-p4-per-cpu-gain.patch
  sched: adjust p4 per-cpu gain

memory-backed-inodes-fix.patch
  memory-backed inodes fix

ext3_bread-cleanup.patch
  ext3_bread() cleanup

flexible-mmap-2.6.7-mm3-A8.patch
  i386 virtual memory layout rework

flexible-mmap-bug-fix.patch
  flexible-mmap BUG fix

flexible-mmap-updatepatch-267-mm5.patch
  flexible-mmap update

sysctl-tunable-for-flexmmap.patch
  sysctl tunable for flexmmap

legacy_va_layout-docs.patch
  legacy_va_layout docs

driver-model-and-sysfs-support-for-pcmcia-1-3.patch
  driver model and sysfs support for PCMCIA (1/3)

driver-model-and-sysfs-support-for-pcmcia-update.patch
  driver model and sysfs support for PCMCIA update

update-drivers-net-pcmcia-2-3.patch
  update drivers/net/pcmcia (2/3)

update-drivers-net-wireless-3-3.patch
  update drivers/net/wireless (3/3)

posix-locking-fix-to-posix_same_owner.patch
  posix locking: Minimal fix to posix_same_owner()

posix-locking-fix-to-locking-code.patch
  posix locking: more locking code fixes

posix-locking-fix-up-nfs4statec.patch
  posix locking: Fix up nfs4state.c

posix-locking-fix-up-lockd.patch
  posix locking: Fix up lockd to make use of the new interface

posix-locking-fl_owner_t-to-pid-mapping.patch
  posix locking: mapping between fl_owner_t and client-side "pid"

dvdrw-support-for-267-bk13.patch
  DVD+RW support for 2.6.7-bk13

cdrw-packet-writing-support-for-267-bk13.patch
  CDRW packet writing support

packet-remove-warning.patch
  packet: remove #warning

packet-door-unlock.patch
  packet writing: door unlocking fix

pkt_lock_door-warning-fix.patch
  pkt_lock_door() warning fix

dvd-rw-packet-writing-update.patch
  Packet writing support for DVD-RW and DVD+RW discs.

fix-race-in-pktcdvd-kernel-thread-handling.patch
  Fix race in pktcdvd kernel thread handling

fix-open-close-races-in-pktcdvd.patch
  Fix open/close races in pktcdvd

packet-writing-review-fixups.patch
  packet writing: review fixups

remove-pkt_dev-from-struct-pktcdvd_device.patch
  Remove pkt_dev from struct pktcdvd_device

packet-writing-docco.patch
  packet writing documentation

trivial-cdrw-packet-writing-doc-update.patch
  Trivial CDRW packet writing doc update

convert-packet-writing-to-seq_file.patch
  packet writing: convert to seq_file

control-pktcdvd-with-an-auxiliary-character-device.patch
  Control pktcdvd with an auxiliary character device

control-pktcdvd-with-an-auxiliary-character-device-fix.patch
  control-pktcdvd-with-an-auxiliary-character-device-fix

simplified-request-size-handling-in-cdrw-packet-writing.patch
  Simplified request size handling in CDRW packet writing

fix-setting-of-maximum-read-speed-in-cdrw-packet-writing.patch
  Fix setting of maximum read speed in CDRW packet writing

r8169_napi-help-text-2.patch
  R8169_NAPI help text

no-sysgood-for-ptrace-singlestep.patch
  Don't use SYSGOOD for ptrace singlestep

err2-6-hashbin_remove_this-locking-fix.patch
  err2-6: hashbin_remove_this() locking fix

dm-use-idr.patch
  devicemapper: use an IDR tree for tracking minors

ipc-1-3-add-refcount-to-ipc_rcu_alloc.patch
  ipc: Add refcount to ipc_rcu_alloc

ipc-2-3-remove-sem_revalidate.patch
  ipc: remove sem_revalidate

ipc-3-3-enforce-semvmx-limit-for-undo.patch
  ipc: enforce SEMVMX limit for undo

cleanup-of-ipc-msgc.patch
  cleanup of ipc/msg.c

sk98lin-procfs-fix.patch
  sk98lin procfs fix

cpufreq-driver-for-nforce2-kernel-267.patch
  cpufreq driver for nForce2

allow-modular-ide-pnp.patch
  allow modular ide-pnp

uml-base-patch.patch
  uml: Uml base patch

rename-uml-console-device.patch
  uml: rename console_device

uml-readds-just-for-now-ghashh-for-uml.patch
  uml: Readds (just for now) ghash.h for UML

uml-avoid-that-gcc-breaks-uml-with-unit-at-a-time-compilation-mode.patch
  uml: Avoid that gcc breaks UML with "unit at a time" compilation mode.

uml-fixes-an-host-fd-leak-caused-by-hostfs.patch
  uml: Fixes an host fd leak caused by hostfs.

uml-adds-legacy_pty-config-option.patch
  uml: Adds LEGACY_PTY config option

uml-makes-make-help-arch=um-work.patch
  uml: Makes "make help ARCH=um" work.

uml-fixes-fixdepc-to-support-arch-um-include-uml-configh.patch
  uml: Fixes "fixdep.c" to support arch/um/include/uml-config.h.

uml-kill-useless-warnings.patch
  uml: Kill useless warnings

uml-avoids-compile-failure-when-host-misses-tkill.patch
  uml: Avoids compile failure when host misses tkill().

uml-reduces-code-in-_user-files-by-moving-it-in-_kern-files-if-already-possible.patch
  uml: Reduces code in *_user files, by moving it in _kern files if already possible.

uml-fixes-raw-and-uses-it-in-check_one_sigio-also-fixes-a-silly-panic-eintr-returned-by-call.patch
  uml: Fixes raw() and uses it in check_one_sigio; also fixes a silly panic (EINTR returned by call).

uml-folds-hostaudio_userc-into-hostaudio_kernc.patch
  uml: Folds hostaudio_user.c into hostaudio_kern.c.

uml-use-ptrace_scemu-the-so-called-sysemu-to-reduce-syscall-cost.patch
  uml: Use PTRACE_SCEMU (the so-called SYSEMU) to reduce syscall cost.

uml-adds-the-nosysemu-command-line-parameter-to-disable-sysemu.patch
  uml: Adds the "nosysemu" command line parameter to disable SYSEMU

uml-adds-proc-sysemu-to-toggle-sysemu-usage.patch
  uml: Adds /proc/sysemu to toggle SYSEMU usage.

uml-fix-for-sysemu-patches.patch
  uml: Fix for sysemu patches

uml-handles-correctly-errno-==-eintr-in-lots-of-places.patch
  uml: Handles correctly errno == EINTR in lots of places.

uml-adds-some-exports.patch
  uml: Adds some exports

uml-avoids-a-panic-for-a-legal-situation.patch
  uml: Avoids a panic for a legal situation

uml-removes-dead-code-in-trap_kernc.patch
  uml: Removes dead code in trap_kern.c

uml-make-malloc-call-vmalloc-if-needed-needed-for-hostfs-on-26-host.patch
  uml: Make malloc() call vmalloc if needed. Needed for hostfs on 2.6 host.

uml-little-kmalloc.patch
  uml: little-kmalloc

uml-fix-os_process_pc-and-os_process_parent-for-corner-cases.patch
  uml: Fix os_process_pc and os_process_parent for corner cases.

uml-remove-a-group-of-unused-bh-functions.patch
  uml: remove a group of unused bh functions

fix-warnings-in-net-irda.patch
  sparse: fix warnings in net/irda/*

i810_audio-fix-the-error-path-of-resource-management.patch
  i810_audio: Fix the error path of resource management

fix-drivers-isdn-hisax-avm_pcic-build-warning-when.patch
  Fix drivers/isdn/hisax/avm_pci.c build warning when !CONFIG_ISAPNP

idr-stale-comment.patch
  idr.c: remove stale comment

bio_copy_user-cleanups.patch
  bio_copy_user() cleanups

idr-comments-updates.patch
  idr comments updates

schedule-profiling.patch
  schedule() profiling
  From: Arjan van de Ven <arjanv@redhat.com>
  Subject: Re: schedule profileing

add-a-few-might_sleep-checks.patch
  Add a few might_sleep() checks

add-a-few-might_sleep-checks-fix.patch
  add-a-few-might_sleep-checks fix

release_task-may-sleep.patch
  permit sleeping in release_task()

crc16-renaming-in-via-velocity-ethernet-driver.patch
  CRC16 renaming in VIA Velocity ethernet driver

per_cpu-per_cpu-cpu_gdt_table.patch
  percpu: cpu_gdt_table

per_cpu-per_cpu-cpu_gdt_table-fix.patch
  per_cpu-per_cpu-cpu_gdt_table-fix

per_cpu-per_cpu-init_tss.patch
  percpu: init_tss

per_cpu-per_cpu-cpu_tlbstate.patch
  percpu: cpu_tlbstate

gcc35-alps_tdlb7.c.patch
  gcc-3.5 fixes

gcc35-always-inline.patch
  gcc-3.5 fixes

gcc35-auerswald.c.patch
  gcc-3.5 fixes

gcc35-dabusb.c.patch
  gcc-3.5 fixes

gcc35-ds.c.patch
  gcc-3.5 fixes

gcc35-fixmap.h.patch
  gcc-3.5 fixes

gcc35-mtrr.h.patch
  gcc-3.5 fixes

gcc35-sonypi.patch
  gcc-3.5 fixes

gcc35-sp887x.c.patch
  gcc-3.5 fixes

gcc35-tda1004x.c.patch
  gcc-3.5 fixes

gcc35-transport.h.patch
  gcc-3.5 fixes

gcc35-ufs_fs.h.patch
  gcc-3.5 fixes

gcc35-videodev.c.patch
  gcc-3.5 fixes

gcc35-wavefront_fx.c.patch
  gcc-3.5 fixes

dev-zero-vs-hugetlb-mappings.patch
  /dev/zero vs hugetlb mappings.

hugetlbfs-private-mappings.patch
  hugetlbfs private mappings

net-kconfig-crc16-fix.patch
  net/Kconfig crc16 warning fix

preset-loops_per_jiffy-for-faster-booting.patch
  preset loops_per_jiffy for faster booting

define-inline-as-__attribute__always_inline-also-for-gcc-=-34.patch
  #define inline as __attribute__((always_inline)) also for gcc >= 3.4

gcc-34-and-broken-inlining.patch
  clean up __always_inline__ usage

handle-undefined-symbols.patch
  Fail if vmlinux contains undefined symbols

268-rc2-mm1-link-errors.patch
  put irq stacks back into bss

split-generic_file_aio_write-into-buffered-and-direct-i-o-parts.patch
  split generic_file_aio_write into buffered and direct I/O parts

radeonfb-cleanup-and-little-fixes.patch
  radeonfb: cleanup and little fixes

making-i-dhash_entries-cmdline-work-as-it-use-to.patch
  Make i/dhash_entries cmdline work as it use to.

making-i-dhash_entries-cmdline-work-as-it-use-to-fix.patch
  making-i-dhash_entries-cmdline-work-as-it-use-to-fix

rivafb-i2c-fixes.patch
  Rivafb I2C fixes

jbd-recovery-latency-fix.patch
  jbd recovery latency fix

truncate_inode_pages-latency-fix.patch
  truncate_inode_pages-latency-fix

journal_clean_checkpoint_list-latency-fix.patch
  journal_clean_checkpoint_list latency fix

journal_clean_checkpoint_list-latency-fix-fix.patch
  journal_clean_checkpoint_list-latency-fix-fix

kjournald-smp-latency-fix.patch
  kjournald-smp-latency-fix

unmap_vmas-smp-latency-fix.patch
  unmap_vmas-smp-latency-fix

__cleanup_transaction-latency-fix.patch
  __cleanup_transaction-latency-fix

prune_dcache-latency-fix.patch
  prune_dcache-latency-fix

filemap_sync-latency-fix.patch
  filemap_sync-latency-fix

slab-latency-fix.patch
  slab-latency-fix

get_user_pages-latency-fix.patch
  get_user_pages-latency-fix

oom-show_free_areas.patch
  oom-killer: call show_free_areas

send_IPI_mask_bitmask-build-fix.patch
  send_IPI_mask_bitmask() build fix

e1000-build-fix.patch
  e1000 build fix

e1000-inlining-fix.patch
  e1000 inlining fix

pty_write-latency-fix.patch
  pty_write-latency-fix

enable-all-events-for-initramfs.patch
  Enable all events for initramfs

arch-i386-kernel-smpc-gcc341-inlining-fix.patch
  arch/i386/kernel/smp.c gcc341 inlining fix

fix-menuconfig-partial-inability-to-show-help-texts.patch
  Fix menuconfig partial inability to show help texts.

was-removal-of-sync-in-panic.patch
  remove sync() from panic

move-cache_reap-out-of-timer-context.patch
  Move cache_reap out of timer context

move-cache_reap-out-of-timer-context-fix.patch
  move-cache_reap-out-of-timer-context-fix

gettimeofday-nanoseconds-patch-makes-it-possible-for-the-posix-timer.patch
  gettimeofday nanoseconds patch

quiet-down-per-zone-memory-stats.patch
  quieten down per-zone memory stats

x86-64-singlestep-through-sigreturn-system-call-2.patch
  Fix x86-64 singlestep through sigreturn system call

create-nodemask_t.patch
  Create nodemask_t

fat-kill-nls-default.patch
  FAT: kill nls default

add-ixdp2x01-board-support-to-cs89x0-driver.patch
  Add IXDP2x01 board support to CS89x0 driver

msi-stop-using-dev-bus-ops-directly-in-msic.patch
  MSI: stop using dev->bus->ops directly in msi.c

msi-msi-msi-x-api-updates.patch
  MSI: MSI/MSI-X API updates

rename-config_pci_use_vector-to-config_pci_msi.patch
  rename CONFIG_PCI_USE_VECTOR to CONFIG_PCI_MSI

remove-dead-prototypes.patch
  remove dead prototypes

s390-use-include-asm-generic-dma-mapping-brokenh.patch
  s390: Use include/asm-generic/dma-mapping-broken.h

cdrom-get_last_written-fix.patch
  Subject: cdrom.c get_last_written fixup

intel8x0c-to-include-ck804-audio-support.patch
  intel8x0.c to include CK804 audio support

get_random_bytes-returns-the-same-on-every-boot.patch
  get_random_bytes() returns the same on every boot

locking-optimization-for-cache_reap.patch
  slab: locking optimization for cache_reap

b44-add-47xx-support.patch
  b44: add 47xx support

fbmon-edd-blacklist.patch
  fbcom: EDD-based blacklisting

signal-race-fix.patch
  signal handling race fix

signal-race-fix-ia64.patch
  signal-race-fix: ia64

signal-race-fix-s390.patch
  signal-race fixes for s390

signal-race-fix-s390-fix.patch
  s390 signal handling fixes

signal-race-fix-x86_64.patch
  signal-race-fixes: x86-64 support

signal-race-fix-x86_64-fix.patch
  x86_64 signal handling fix

ppc-signal-handling-fixes.patch
  ppc signal handling fixes

signal-race-fixes-sparc-sparc64.patch
  signal handling race fixes: sparc and sparc64

signal-race-fixes-ppc64.patch
  pPC64 signal race fix patch

process-aggregates.patch
  Process Aggregates (PAGG)

process-aggregates-warning-fix.patch
  process-aggregates warning fix

d_unhash-consolidation.patch
  d_unhash consolidation

allow-x86_64-to-reenable-interrupts-on-contention.patch
  Allow x86_64 to reenable interrupts on contention

move-pit-code-to-timer_pit.patch
  x86: move PIT code to timer_pit

move-pit-code-to-timer_pit-warning-fix.patch
  move-pit-code-to-timer_pit-warning-fix

i2o-build_99.patch
  i20 rewrite

i2o-build_99-gcc295-fixes.patch
  i2o-build_99-gcc295-fixes

i2o-resync-with-post-266-changes.patch
  i2o: resync with post-2.6.6 changes

i2o-resync-with-post-266-changes-2.patch
  i2o: more resyncing with post-2.6.6 changes

activate-smbus-device-on-hp-d300l.patch
  activate SMBus device on hp d300l

apic-output-reduction.patch
  IO-APIC debug message reduction

fix-ide-probe-double-detection.patch
  Fix ide probe double detection

fix-smm-failures-on-e750x-systems.patch
  fix SMM failures on E750x systems

serial-cs-and-unusable-port-size-ranges.patch
  serial-cs and unusable port size ranges

make-shrinker_sem-an-rwsem.patch
  make shrinker_sem an rwsem

vlan-support-for-3c59x-3c90x.patch
  VLAN support for 3c59x/3c90x

add-support-for-innovision-dm-8401h.patch
  Add support for Innovision DM-8401H

break-out-zone-free-list-initialization.patch
  break out zone free list initialization

fbcon-differentiate-bits_per_pixel-from-color-depth.patch
  fbcon: ifferentiate bits_per_pixel from color depth

fbcon-differentiate-bits_per_pixel-from-color-depth-fixup.patch
  fbcon-differentiate-bits_per_pixel-from-color-depth-fixup

fbcon-differentiate-bits_per_pixel-from-color-depth-export.patch
  fbcon-differentiate-bits_per_pixel-from-color-depth-export

fbdev-set-color-fields-correctly.patch
  fbdev: set color fields correctly

fbdev-attn-maintainers-set-correct-hardware-capabilities.patch
  fbdev: ATTN: Maintainers - Set correct hardware capabilities

rivafb-do-not-tap-vga-ports-if-not-x86.patch
  rivafb: Do not tap VGA ports if not X86

i810fb-fixes.patch
  i810fb fixes

i810fb-fixes-2.patch
  i810fb fixes #2

drm-optimisation.patch
  drm optimisation

maintainers-update.patch
  MAINTAINERS update

fdomain-isa-fixup.patch
  fdomain_cs ISA fix

net-smc9194c-fix-inline-compile-errors-fwd.patch
  net/smc9194.c: fix gcc-3.5 inline compile errors

net-hamachic-remove-bogus-inline-at-function-prototype.patch
  net/hamachi.c: gcc-3.5 build fixes

scsi-qla2xxx-fix-inline-compile-errors.patch
  qla2xxx gcc-3.5 fixes

net-rrunnerc-fix-inline-compile-error.patch
  net/rrunner.c: gcc-3.5 fixes

istallion-remove-inlines.patch
  istallion: gcc-3.5 fixes

mxserc-fix-inlines-fwd.patch
  mxser.c: gcc-3.5 fixes

radio-maestroc-remove-an-inline-fwd.patch
  radio-maestro.c: gcc-3.5 fixes

modular-swim3.patch
  modular swim3

modular-anscd.patch
  Fix modular anscd

jffs2_compression_options-fix.patch
  JFFS2_COMPRESSION_OPTIONS dependency fix

ppc8xx-maintainer-patch.patch
  PPC8xx Maintainer patch

ext2_readdir-filp-f_pos-fix.patch
  ext2_readdir() filp->f_pos fix

netfilter-ip_nat_snmp_basicc-fix-inlines-fwd.patch
  netfilter/ip_nat_snmp_basic.c: gcc-3.5 fixes

net-tulip-dmfec-fix-inline-compile-errors-fwd.patch
  net/tulip/dmfe.c: gcc-3.5 fixes

do_general_protection-doesnt-disable-irq.patch
  do_general_protection doesn't disable irq

jbd-jh-unmapping-race-fix.patch
  jbd-jh-unmapping-race-fix

nfs4-oops-fixes.patch
  nsf4 oops fixes

proc_pid_cmdline-race-fix.patch
  proc_pid_cmdline() race fix

support-for-exar-xr17c158-octal-uart.patch
  Support for Exar XR17C158 Octal UART

dvb-errno-removal.patch
  DVB: "errno" undefined

x86-64-merge-for-268rc2-mm1.patch
  x86-64 merge for 2.6.8rc2-mm1

ia64-swiotlb-fixes.patch
  ia64: Various swiotlb fixes

documentation-fix-for-nmi-watchdog.patch
  Documentation fix for NMI watchdog

hpet-copyrights-cleanup.patch
  HPET copyrights, cleanup

remove-outdated-reference-to-documentation-arm-sa1100-pcmcia-fwd.patch
  remove outdated reference to Documentation/arm/SA1100/PCMCIA

canonically-reference-files-in-documentation-code-comments-part.patch
  Canonically reference files in Documentation/ code comments part

altix-system-controller-communication-driver.patch
  Altix system controller communication driver

snsc-build-fix.patch
  snsc-build-fix

move-duplicate-bug-and-warn_on-bits-to-asm-generic.patch
  move duplicate BUG and WARN_ON bits to asm-generic

fix-con_buf_size-usage.patch
  Fix CON_BUF_SIZE usage

vprintk-support.patch
  vprintk support

vprintk-for-ext2-errors.patch
  vprintk for ext2 errors

vprintk-for-ext3-errors.patch
  vprintk for ext3 errors

remove-symbol_is.patch
  Remove symbol_is()

prio_tree-kill-vma_prio_tree_init.patch
  prio_tree: kill vma_prio_tree_init()

prio_tree-iterator-vma_prio_tree_next-cleanup.patch
  prio_tree: iterator + vma_prio_tree_next cleanup

rcu-cpu-offline-cleanup.patch
  RCU - cpu-offline-cleanup

rcu-rcu-cpu-offline-fix.patch
  RCU - cpu offline fix

rcu-low-latency-rcu.patch
  RCU: low latency rcu

alpha-print-the-symbol-of-pc-and-ra-during-oops.patch
  alpha: print the symbol of pc and ra during Oops

staircase-cpu-scheduler-268-rc2-mm1.patch
  Staircase cpu scheduler

first-next_cpu-returns-values-nr_cpus.patch
  first/next_cpu returns values > NR_CPUS

first-next_cpu-returns-values-nr_cpus-fix.patch
  first-next_cpu-returns-values-nr_cpus fix

add-support-for-it8212-ide-controllers.patch
  Add support for IT8212 IDE controllers

drivers-net-wan-cycx_x25c189-warning-conflicting-types.patch
  drivers/net/wan/cycx_x25.c:189: warning: conflicting types for built-in function 'log2'

watchdog-fix-warning-defined-but-not-used.patch
  watchdog: fix warning "defined but not used"

fix-pci-access-mode-dependences-in-arch-i386-kconfig.patch
  fix PCI access mode dependences in arch/i386/Kconfig

drivers-block-ubc-6.patch
  drivers/block/ub.c #6

ub-warning-fixes.patch
  ub warning fixes

i386-hotplug-cpu.patch
  i386 Hotplug CPU

token-based-thrashing-control.patch
  token based thrashing control

token-based-thrashing-control-remove-debug.patch
  token-based-thrashing-control-remove-debug

writeback-page-range-hint.patch
  Writeback page range hint

fix-writeback-page-range-to-use-exact-limits.patch
  Fix writeback page range to use exact limits

mpage-writepages-range-limit-fix.patch
  mpage writepages range limit fix

filemap_fdatawrite-range-interface.patch
  filemap_fdatawrite range interface

concurrent-o_sync-write-support.patch
  Concurrent O_SYNC write support

fix-inlining-errors-in-drivers-scsi-aic7xxx-aic79xx_osmc.patch
  inlining errors in drivers/scsi/aic7xxx/aic79xx_osm.c

fix-inline-related-gcc-34-build-failures-in.patch
  fix inline related gcc 3.4 build failures in drivers/net/wan/dscc4.c

nfsd-force-server-side-tcp-when-nfsv4-enabled.patch
  nfsd: force server-side TCP when NFSv4 enabled

nfsd-nfsd-is-missing-a-put_group_info-in-the-auth_null.patch
  nfsd: nfsd is missing a put_group_info in the auth_null

nfsd-make-cache_init-initialize-reference-count-to-1.patch
  nfsd: make cache_init initialize reference count to 1

nfsd-simplify-auth_domain_lookup.patch
  nfsd: simplify auth_domain_lookup

nfsd-fix-ip_map-cache-reference-count-leak.patch
  nfsd: fix ip_map cache reference count leak.

nfsd-basic-v4-acl-definitions.patch
  nfsd: basic v4 ACL definitions

nfsd-posix-nfsv4-acl-translation-for-nfsd.patch
  nfsd: POSIX<->NFSv4 acl translation for nfsd

nfsd-acl-support-for-the-nfsv4-server.patch
  nfsd: ACL support for the NFSv4 server

bridge-build-fix.patch
  bridge build fix




^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02  8:55 2.6.8-rc2-mm2 Andrew Morton
@ 2004-08-02  9:23 ` Espen Fjellvær Olsen
  2004-08-02 12:10 ` 2.6.8-rc2-mm2 Rik van Riel
                   ` (13 subsequent siblings)
  14 siblings, 0 replies; 55+ messages in thread
From: Espen Fjellvær Olsen @ 2004-08-02  9:23 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux kernel mailing list

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Andrew Morton wrote:

| - Added Con's staircase CPU scheduler.
|
| This will probably have to come out again because various people
| are still fiddling with the CPU scheduler.  But my feeling here is
| that the current 1st-gen CPU scheduler has been tweaked as far as
| it can go and is still not 100% right.  It is time to start
| thinking about a new design which addresses the requirements and
| current problems by algorithmic means rather than by tweaking.
| Removing over 300 lines from the scheduler is a good sign.
|
| Feedback on this patch is sought.
|
I'm glad you added staircase, I've had better experiences with
staircase than the one which was mainstream before, I don't have any
actual timings on it, but it felt more responsive under heavier
load(Compiling much, listening to music, browsing...). :)

- --
Espen Fjellvær Olsen
eldiablo@svorka.net
Norway
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFBDggWibTL5aHQf7URAmwvAJ46i+5OpkIQp4BtYt2xQScje5hmbgCfXjeF
a9Q46GSRh9YWtp2lfVay1IY=
=PlKC
-----END PGP SIGNATURE-----


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02  8:55 2.6.8-rc2-mm2 Andrew Morton
  2004-08-02  9:23 ` 2.6.8-rc2-mm2 Espen Fjellvær Olsen
@ 2004-08-02 12:10 ` Rik van Riel
  2004-08-05 10:56   ` 2.6.8-rc2-mm2 Hideo AOKI
  2004-08-02 13:07 ` 2.6.8-rc2-mm2 Con Kolivas
                   ` (12 subsequent siblings)
  14 siblings, 1 reply; 55+ messages in thread
From: Rik van Riel @ 2004-08-02 12:10 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel

On Mon, 2 Aug 2004, Andrew Morton wrote:

> - Added Rik's token-based load control patch.  The VM currently has pretty
>   bad performance problems under heavy swapping loads and this patch speeds up
>   simple tests most impressively.  People who care about these things: please
>   test and measure.

I would really appreciate any testing results on this, both good
and bad.  I want to get this thing tuned and into a generally good
shape for use by everybody upstream.

I'm especially interested in how this affects compute servers,
desktops and heavily overloaded network servers (the "spamassassin
slowed my system to a crawl" symptom would be one to test ;)).

I suspect the patch may need some tweaking to help interactivity
in some cases, but maybe it'll already work magically by itself...

-- 
"Debugging is twice as hard as writing the code in the first place.
Therefore, if you write the code as cleverly as possible, you are,
by definition, not smart enough to debug it." - Brian W. Kernighan

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02  8:55 2.6.8-rc2-mm2 Andrew Morton
  2004-08-02  9:23 ` 2.6.8-rc2-mm2 Espen Fjellvær Olsen
  2004-08-02 12:10 ` 2.6.8-rc2-mm2 Rik van Riel
@ 2004-08-02 13:07 ` Con Kolivas
  2004-08-03  6:43   ` 2.6.8-rc2-mm2 Nick Piggin
  2004-08-02 13:52 ` 2.6.8-rc2-mm2 William Lee Irwin III
                   ` (11 subsequent siblings)
  14 siblings, 1 reply; 55+ messages in thread
From: Con Kolivas @ 2004-08-02 13:07 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 923 bytes --]

Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc2/2.6.8-rc2-mm2/
> - Added Con's staircase CPU scheduler.
> 
>   This will probably have to come out again because various people are still
>   fiddling with the CPU scheduler.  But my feeling here is that the current
>   1st-gen CPU scheduler has been tweaked as far as it can go and is still not
>   100% right.  It is time to start thinking about a new design which addresses
>   the requirements and current problems by algorithmic means rather than by
>   tweaking.  Removing over 300 lines from the scheduler is a good sign.
> 
>   Feedback on this patch is sought.

Anyone with feedback on this please cc me. This was developed separately 
from the -mm series which has heaps of other scheduler patches which 
were not trivial to merge with so there may be teething problems. Good 
reports dont hurt either ;)

Cheers,
Con

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 256 bytes --]

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02  8:55 2.6.8-rc2-mm2 Andrew Morton
                   ` (2 preceding siblings ...)
  2004-08-02 13:07 ` 2.6.8-rc2-mm2 Con Kolivas
@ 2004-08-02 13:52 ` William Lee Irwin III
  2004-08-02 16:12   ` 2.6.8-rc2-mm2 William Lee Irwin III
  2004-08-02 14:28 ` 2.6.8-rc2-mm2 William Lee Irwin III
                   ` (10 subsequent siblings)
  14 siblings, 1 reply; 55+ messages in thread
From: William Lee Irwin III @ 2004-08-02 13:52 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 2521 bytes --]

On Mon, Aug 02, 2004 at 01:55:27AM -0700, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc2/2.6.8-rc2-mm2/
> - Tons of new fixes and cleanups and updates to various things as usual.
> - Again, 2.6.8 is close, so if people have critical fixes in here which
>   need flushing out, please ping me.

Speaking of cleanups, I've got a little something.
 65 files changed, 274 insertions(+), 1076 deletions(-)

This mass slaughter of duplicated code is a cleanup of /proc/profile
that consolidates code across all arches and privatizes private state.
Compiletested on x86-64. Prior incarnations of earlier cleanups this
is based on were runtime tested on ia32, x86-64, sparc64, and alpha.

The purpose of these cleanups in their prior incarnations has been for
use as a preparatory cleanup for profiling other kinds of events in
/proc/profile's buffer (or similar buffers). There has recently been a
need to discover which codepaths were responsible for leaking inodes
that were leaking that similar cleanups in combination with some slab
profiling hooks are being used to instrument.

In order, the patches of the series (included as a series of separate
MIME attachments to this post) are:
consolidate-prof_cpu_mask.patch
	Handling of prof_cpu_mask is grossly inconsistent. Some arches
	have it as a cpumask_t, others unsigned long, and even within
	arches it's treated inconsistently. This makes it cpumask_t
	across the board, and consolidates the handling in kernel/profile.c
profile_pc.patch
	The program counter calculation from pt_regs is the only
	portion of profile accounting that differs across various
	architectures. This is usually instruction_pointer(regs), but
	to handle the few arches where it isn't, introduce profile_pc().
profile_tick.patch
	With prof_cpu_mask and profile_pc() in hand, the core is now
	able to perform all the profile accounting work on behalf of
	arches. Consolidate the profile accounting and convert all
	arches to call the core function.
move-profile-operations.patch
	proc_misc.c is a trainwreck. Move the file_operations for
	/proc/profile into kernel/profile.c and call the profiling
	setup from proc_misc_init().
static-profile-state.patch
	Make the various bits of state no longer used anywhere else
	static to kernel/profile.c
atomic-prof_buffer.patch
	Convert prof_buffer to an array of atomic_t instead of
	sometimes atomic_t, sometimes unsigned int. Also, bootmem
	rounds up internally, so blow away some crap code there.

-- wli

[-- Attachment #2: consolidate-prof_cpu_mask.patch.gz --]
[-- Type: application/octet-stream, Size: 3129 bytes --]

[-- Attachment #3: profile_pc.patch.gz --]
[-- Type: application/octet-stream, Size: 3367 bytes --]

[-- Attachment #4: profile_tick.patch.gz --]
[-- Type: application/octet-stream, Size: 6289 bytes --]

[-- Attachment #5: move-profile-operations.patch.gz --]
[-- Type: application/octet-stream, Size: 1677 bytes --]

[-- Attachment #6: static-profile-state.patch.gz --]
[-- Type: application/octet-stream, Size: 797 bytes --]

[-- Attachment #7: atomic-prof_buffer.patch.gz --]
[-- Type: application/octet-stream, Size: 779 bytes --]

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02  8:55 2.6.8-rc2-mm2 Andrew Morton
                   ` (3 preceding siblings ...)
  2004-08-02 13:52 ` 2.6.8-rc2-mm2 William Lee Irwin III
@ 2004-08-02 14:28 ` William Lee Irwin III
  2004-08-02 15:31 ` 2.6.8-rc2-mm2 Mark Watts
                   ` (9 subsequent siblings)
  14 siblings, 0 replies; 55+ messages in thread
From: William Lee Irwin III @ 2004-08-02 14:28 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel

On Mon, Aug 02, 2004 at 01:55:27AM -0700, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc2/2.6.8-rc2-mm2/

Nuke the real undefined symbol in sparc32. This is the only real hit
from ldchk on sparc32; the rest are all btfixup-related (Sam Ravnborg
and I are working on addressing that).


Index: mm1-2.6.8-rc2/arch/sparc/kernel/entry.S
===================================================================
--- mm1-2.6.8-rc2.orig/arch/sparc/kernel/entry.S
+++ mm1-2.6.8-rc2/arch/sparc/kernel/entry.S
@@ -858,7 +858,7 @@
 vac_hwflush_patch2_on:		sta	%g0, [%l3 + %l7] ASI_HWFLUSHSEG
 
 	.globl	invalid_segment_patch1, invalid_segment_patch2
-	.globl	num_context_patch1, num_context_patch2
+	.globl	num_context_patch1
 	.globl	vac_linesize_patch, vac_hwflush_patch1
 	.globl	vac_hwflush_patch2
 
Index: mm1-2.6.8-rc2/arch/sparc/mm/sun4c.c
===================================================================
--- mm1-2.6.8-rc2.orig/arch/sparc/mm/sun4c.c
+++ mm1-2.6.8-rc2/arch/sparc/mm/sun4c.c
@@ -379,7 +379,7 @@
 extern unsigned long invalid_segment_patch2, invalid_segment_patch2_ff;
 extern unsigned long invalid_segment_patch1_1ff, invalid_segment_patch2_1ff;
 extern unsigned long num_context_patch1, num_context_patch1_16;
-extern unsigned long num_context_patch2, num_context_patch2_16;
+extern unsigned long num_context_patch2_16;
 extern unsigned long vac_linesize_patch, vac_linesize_patch_32;
 extern unsigned long vac_hwflush_patch1, vac_hwflush_patch1_on;
 extern unsigned long vac_hwflush_patch2, vac_hwflush_patch2_on;

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02  8:55 2.6.8-rc2-mm2 Andrew Morton
                   ` (4 preceding siblings ...)
  2004-08-02 14:28 ` 2.6.8-rc2-mm2 William Lee Irwin III
@ 2004-08-02 15:31 ` Mark Watts
  2004-08-02 15:33   ` 2.6.8-rc2-mm2 Jesper Juhl
                     ` (2 more replies)
  2004-08-02 15:57 ` 2.6.8-rc2-mm2 Martin Zwickel
                   ` (8 subsequent siblings)
  14 siblings, 3 replies; 55+ messages in thread
From: Mark Watts @ 2004-08-02 15:31 UTC (permalink / raw)
  To: linux-kernel

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


Noting the large wad of x86-64 stuff in here, I'm going to give it a whirl. 
Stupid question though - do I apply this to 2.6.8rc2 or does it bring 2.6.7 
up to rc2-mm2 ?

Mark.


> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc2/2.6
>.8-rc2-mm2/
>
>
> - Some fairly significant changes to the RCU code.  Should address
>   scheduling latency issues which we've seen in there.
>
> - Various changes to the writeback code - mainly to support concurrent
>   O_SYNC writers to the same file.  Also arrange for O_SYNC writes to sync
>   only the part of the file which the caller actually wrote.  Database
> stuff.
>
> - Added Con's staircase CPU scheduler.
>
>   This will probably have to come out again because various people are
> still fiddling with the CPU scheduler.  But my feeling here is that the
> current 1st-gen CPU scheduler has been tweaked as far as it can go and is
> still not 100% right.  It is time to start thinking about a new design
> which addresses the requirements and current problems by algorithmic means
> rather than by tweaking.  Removing over 300 lines from the scheduler is a
> good sign.
>
>   Feedback on this patch is sought.
>
> - Added Rik's token-based load control patch.  The VM currently has pretty
>   bad performance problems under heavy swapping loads and this patch speeds
> up simple tests most impressively.  People who care about these things:
> please test and measure.
>
> - Tons of new fixes and cleanups and updates to various things as usual.
>
> - Again, 2.6.8 is close, so if people have critical fixes in here which
>   need flushing out, please ping me.
>
>
>
> Changes since 2.6.8-rc2-mm1:
>
>
>  linus.patch
>  bk-acpi.patch
>  bk-alsa.patch
>  bk-dma-declare-coherent-memory.patch
>  bk-cpufreq.patch
>  bk-drm.patch
>  bk-ieee1394.patch
>  bk-input.patch
>  bk-libata.patch
>  bk-netdev.patch
>  bk-ntfs.patch
>  bk-pci.patch
>  bk-pnp.patch
>  bk-power.patch
>  bk-scsi.patch
>  bk-usb.patch
>
>  Latest versions of external trees
>
> -fixes-for-rcu_offline_cpu-rcu_move_batch-268-rc2.patch
> -unix98-pty-indices-leak.patch
> -sched-initialize-sched-domain-table.patch
> -compat_clock_getres-shouldnt-return-efault-if-res-==-null.patch
> -bio-page-refcounting-fix.patch
> -bk-acpi-x86_cpu_to_apicid-fix.patch
> -ppc64-page-align-emergency-stack-2.patch
> -ppc64-remove-multiple-irq-optimisation.patch
> -ppc64-cpu-hotplug-fix.patch
> -ppc64-whitespace-cleanup-in-promc.patch
> -ppc64-hvcs-driver.patch
> -ppc64-smt-bugfix.patch
> -ppc32-fix-ppc44x-early-uart-setup.patch
> -ppc32-export-some-dma-api-symbols.patch
> -ppc32-fix-comment-in-arch-ppc-platforms-pmac_pcic.patch
> -enable-suspend-resuming-of-e1000.patch
> -i810_audio-mmio-support.patch
> -i810_audio-mmio-support-2.patch
> -ia64-ptrace-fix-fix.patch
> -possible-buglet-in-drivers-input-joystick-tmdcc.patch
> -gcc35-advansys.c.patch
> -gcc35-arlan.h.patch
> -gcc35-fore200e.c.patch
> -gcc35-index.html.patch
> -gcc35-ip6_fib.c.patch
> -gcc35-iphase.h.patch
> -gcc35-irttp.h.patch
> -gcc35-netrom.h.patch
> -gcc35-pppoe.c.patch
> -gcc35-usblp.c.patch
> -gcc35-xfrm6_state.c.patch
> -fix-rivafbs-nv_arch_-cleanup-debug-backlight-control-on-ppc.patch
> -fix-rivafbs-nv_arch_-cleanup-debug-backlight-control-on-ppc-fix.patch
> -hugetlbfs-vm_pgoff-bugs.patch
> -unknown-symbol-in-drivers-scsi-pcmcia-fdomain_csko.patch
> -fix-double-reset-in-aic7xxx-driver.patch
> -v850-define-find_first_bit.patch
> -radeonfb-64-bit-fix.patch
> -net-sunrpc-xprtc-gcc341-inlining-fix.patch
> -switch-sgc-to-standard-jiffies-converters.patch
> -sign-fix-in-swapfilec.patch
> -a-trivial-patch-for-removing-unnecessary-comment-in-mm-filemapc.patch
> -fix-for-buffer-limit-for-long-in-sysctlc.patch
> -ipmi_msghandler-module-load-failure-fix.patch
> -remove-scripts-mkconfigs.patch
> -267-msi-x-update.patch
> -fix-readahead-breakage-for-sequential-after-random-reads.patch
> -update-mailing-list-for-osst.patch
> -fix-aic-for-db4.patch
> -m68k-68060-errata-i14.patch
> -m68k-ifpsp060.patch
> -m68k-sparse-missing-void.patch
> -m68k-sparse-if-vs-ifdef.patch
> -m68k-sparse-void-return.patch
> -m68k-sparse-extern.patch
> -m68k-sparse-inline.patch
> -dsp56k-sparse-const.patch
> -m68k-sparse-floating-point.patch
> -dnfb-sparse-struct-init.patch
> -amifb-sparse-=.patch
> -m68k-hardirqh.patch
> -dmasound-paths.patch
> -m68k-bitops.patch
> -m68k-checksum-include.patch
> -m68k-pgalloc-fixup.patch
> -m68k-maintainership.patch
> -depends-on-pci-multi-tech-synclink-applicom-serial.patch
> -pci-warnings-moxa-serial.patch
> -pci-warnings-specialix-serial.patch
> -depends-on-pci-via686a-i2c.patch
> -depends-on-pci-dma-api-ieee1394-core-and-sbp-2.patch
> -depends-on-pci-fritzpci-pciv2-pnp-and-hysdn.patch
> -pci-warnings-hisax-isdn.patch
> -depends-on-pci-guillemot-maxi-radio-fm-2000.patch
> -depends-on-pci-technisat-skystar2-pci.patch
> -depends-on-pci-dma-api-cisco-aironet-34x-35x-4500-4800.patch
> -depends-on-pci-toshiba-and-via-fir.patch
> -depends-on-pci-matrox-1-wire.patch
> -dallas-1-wire-delayh.patch
> -linux-mmzoneh-const.patch
> -cirrusfb-update-for-amiga-zorro.patch
> -page_cache_readahead-unused-variable.patch
> -remove-faulty-__inits-from-drivers-video-fbmemc-fwd.patch
> -export-all-functions-in-lib-stringc.patch
> -hlist_for_each_safe-cleanup.patch
> -front-buttons-wouldnt-mute-ess-maestro.patch
> -ipv6-routec-gcc-341-fix-inline.patch
> -config-file-for-laptop-mode.patch
> -add-documentation-about-proc-sys-vm-laptop_mode-to-various-docs.patch
> -automatically-disable-laptop-mode-when-battery-almost-runs-out.patch
> -ppc32-snd-powermac-requires-i2c.patch
> -ext2_readdir-retval-fix.patch
> -ncpfs-setattr-retval-fix.patch
> -recommend-noapic-when-timer-via-ioapic-fails.patch
> -s390-core-changes.patch
> -s390-zfcp-host-adapter.patch
> -s390-network-driver-changes.patch
> -dvb-major-number.patch
> -selinux-fix-clearing-of-new-personality-bit-on-security-transitions.patch
> -lost-error-code-in-rescan_partitions.patch
> -trivial-doc-patch-for-partitions.patch
> -rename-config_pci_use_vector-to-config_pci_msi.patch
> -fix-bogus-ioctl-return-in-mtrr.patch
> -remove-boot98.patch
> -writepages-drops-bh-on-not-uptodate-page.patch
> -critical-x86-64-patches-for-268rc2.patch
>
>  Merged
>
> -sysfs-leaves-mount.patch
> -sysfs-leaves-dir.patch
> -sysfs-leaves-file.patch
> -sysfs-leaves-bin.patch
> -sysfs-leaves-symlink.patch
> -sysfs-leaves-misc.patch
> +sysfs-backing-store-add-sysfs_dirent-to-sysfs-dentry.patch
> +sysfs-backing-store-use-sysfs_dirent-tree-for-readdir-etc.patch
> +sysfs-backing-store-free-sysfs_dirent-on-file-removal.patch
> +sysfs-backing-store-change-sysfs_file_operations.patch
> +sysfs-backing-store-stop-pinning-dentries-inodes-for-leaves.patch
>
>  Updated backing-store-for-sysfs patches
>
> +sched-use-for_each_cpu.patch
>
>  CPU hotunplug fix
>
> +fix-bsd-accounting-cross-platform-compatibility.patch
>
>  BSD accounting format fix
>
> +mm-swsusp-make-sure-we-do-not-return-to-userspace-where-image-is-on-disk.p
>atch +mm-swsusp-copy_page-is-harmfull.patch
>
>  swsusp fixes
>
> +ppc64-__make_room-warning-fix.patch
> +ppc64-fix-off-by-one-in-mem_init.patch
> +ppc64-struct-pci_controller-cleanup.patch
> +ppc64-isa-device-tree-node-refcount-fix.patch
> +ppc64-fix-hotplug-irq-migration-code.patch
> +ppc64-fix-cpu_up-race.patch
> +ppc64-improve-slb-reload.patch
> +ppc64-remove-include-processorh-from-div64s.patch
>
>  ppc64 updates
>
> +ppc32-support-for-mpc8560-cpu-and-boards.patch
> +ppc32-support-for-mpc8555-cpu-and-board.patch
>
>  ppc32 updates
>
> +dev-mem-restriction-patch.patch
>
>  Restrict the memory which may be accessed via /dev/mem (x86 only).
>
>  Disable /dev/kmem writes altogether.
>
> +sched-merge-fix.patch
>
>  CPU scheduler fix
>
> +sched-isolated-sched-domains.patch
> +sched-isolated-sched-domains-fix.patch
> +create-cpu_sibling_map-for-ppc64.patch
> +create-cpu_sibling_map-for-ppc64-fix.patch
> +sched-adjust-p4-per-cpu-gain.patch
>
>  CPU scheduler updates
>
> +sysctl-tunable-for-flexmmap.patch
> +legacy_va_layout-docs.patch
>
>  Create /proc/sys/vm/legacy_va_layout - it switches the mmap layout back to
>  the old version, system-wide.
>
> +packet-remove-warning.patch
> +packet-door-unlock.patch
> +pkt_lock_door-warning-fix.patch
> +trivial-cdrw-packet-writing-doc-update.patch
> +simplified-request-size-handling-in-cdrw-packet-writing.patch
> +fix-setting-of-maximum-read-speed-in-cdrw-packet-writing.patch
>
>  Packet driver updates
>
> +uml-remove-a-group-of-unused-bh-functions.patch
>
>  UML cleanup
>
> +bio_copy_user-cleanups.patch
>
>  Fix BIO copy-to-userspace handling
>
> +journal_clean_checkpoint_list-latency-fix-fix.patch
>
>  Fix the fix for recuding latency in JBD.
>
> +e1000-inlining-fix.patch
>
>  gcc-3.5 build fix
>
> +msi-stop-using-dev-bus-ops-directly-in-msic.patch
> +msi-msi-msi-x-api-updates.patch
> +rename-config_pci_use_vector-to-config_pci_msi.patch
>
>  MSI updates
>
> +signal-race-fix-s390-fix.patch
> +signal-race-fix-x86_64-fix.patch
> +ppc-signal-handling-fixes.patch
> +signal-race-fixes-sparc-sparc64.patch
> +signal-race-fixes-ppc64.patch
>
>  Update various architectures for the signal handling race fix.
>
> +i2o-resync-with-post-266-changes.patch
> +i2o-resync-with-post-266-changes-2.patch
>
>  Forward-port the 2.6.6->current i2o changes into the i2o driver rewrite.
>
> +make-shrinker_sem-an-rwsem.patch
>
>  Concurrent slab shrinking in the VM
>
> +vlan-support-for-3c59x-3c90x.patch
>
>  Add vlan support to 3c59x.c
>
> +add-support-for-innovision-dm-8401h.patch
>
>  More IDE chip support
>
> +break-out-zone-free-list-initialization.patch
>
>  Split up some mm init code for future work
>
> +fbcon-differentiate-bits_per_pixel-from-color-depth.patch
> +fbcon-differentiate-bits_per_pixel-from-color-depth-fixup.patch
> +fbcon-differentiate-bits_per_pixel-from-color-depth-export.patch
> +fbdev-set-color-fields-correctly.patch
> +fbdev-attn-maintainers-set-correct-hardware-capabilities.patch
> +rivafb-do-not-tap-vga-ports-if-not-x86.patch
> +i810fb-fixes.patch
> +i810fb-fixes-2.patch
>
>  Framebuffer updates
>
> +268-rc2-mm1-link-errors.patch
>
>  Fix bogus detection of undefined symbols
>
> +drm-optimisation.patch
>
>  DRM cleanups/speedups
>
> +maintainers-update.patch
>
>  macro has moved.
>
> +fdomain-isa-fixup.patch
>
>  Fix the fdomain driver build
>
> +net-smc9194c-fix-inline-compile-errors-fwd.patch
> +net-hamachic-remove-bogus-inline-at-function-prototype.patch
> +scsi-qla2xxx-fix-inline-compile-errors.patch
> +net-rrunnerc-fix-inline-compile-error.patch
> +istallion-remove-inlines.patch
> +mxserc-fix-inlines-fwd.patch
> +radio-maestroc-remove-an-inline-fwd.patch
> +netfilter-ip_nat_snmp_basicc-fix-inlines-fwd.patch
> +net-tulip-dmfec-fix-inline-compile-errors-fwd.patch
> +fix-inlining-errors-in-drivers-scsi-aic7xxx-aic79xx_osmc.patch
> +fix-inline-related-gcc-34-build-failures-in.patch
>
>  More attempts to recover from the gcc-3.4 disaster.
>
> +modular-swim3.patch
> +modular-anscd.patch
>
>  Fix a couple of drivers for modular builds
>
> +jffs2_compression_options-fix.patch
>
>  jffs2 fix
>
> +ppc8xx-maintainer-patch.patch
>
>  MAINTAINER update
>
> +ext2_readdir-filp-f_pos-fix.patch
>
>  Fix f_pos handling in ext2_readdir()
>
> +do_general_protection-doesnt-disable-irq.patch
>
>  Remvoe unneeded local IRQ enabling
>
> +jbd-jh-unmapping-race-fix.patch
>
>  JBD race fix.
>
> +nfs4-oops-fixes.patch
>
>  nfsv4 oops fixes
>
> +proc_pid_cmdline-race-fix.patch
>
>  Fix race accessing /porc/pid/cmdline
>
> +support-for-exar-xr17c158-octal-uart.patch
>
>  Serial driver support
>
> +dvb-errno-removal.patch
>
>  Fix DVB build
>
> +x86-64-merge-for-268rc2-mm1.patch
>
>  Big x86_64 udpate
>
> +ia64-swiotlb-fixes.patch
>
>  Fix bugs in IA64 swiotlb code.
>
> +documentation-fix-for-nmi-watchdog.patch
>
>  NMI documentation fix
>
> +hpet-copyrights-cleanup.patch
>
>  Fix copyrights in HPET driver
>
> +remove-outdated-reference-to-documentation-arm-sa1100-pcmcia-fwd.patch
> +canonically-reference-files-in-documentation-code-comments-part.patch
>
>  Fox references to Documentation files
>
> +altix-system-controller-communication-driver.patch
> +snsc-build-fix.patch
>
>  SGI Altix system controller communication support
>
> +move-duplicate-bug-and-warn_on-bits-to-asm-generic.patch
>
>  Consolidate some debug macros
>
> +fix-con_buf_size-usage.patch
>
>  CON_BUF_SIZE fix
>
> +vprintk-support.patch
> +vprintk-for-ext2-errors.patch
> +vprintk-for-ext3-errors.patch
>
>  Add vprintk(), use it in ext2 and ext3.
>
> +remove-symbol_is.patch
>
>  Remove unused symbol_is()
>
> +prio_tree-kill-vma_prio_tree_init.patch
> +prio_tree-iterator-vma_prio_tree_next-cleanup.patch
>
>  prio-tree cleanups
>
> +rcu-cpu-offline-cleanup.patch
> +rcu-rcu-cpu-offline-fix.patch
> +rcu-low-latency-rcu.patch
>
>  RCU updates.
>
> +alpha-print-the-symbol-of-pc-and-ra-during-oops.patch
>
>  Make alpha oopses more friendly.
>
> +staircase-cpu-scheduler-268-rc2-mm1.patch
>
>  Staircase scheduler.
>
> +first-next_cpu-returns-values-nr_cpus.patch
> +first-next_cpu-returns-values-nr_cpus-fix.patch
>
>  Fix __first_cpu() and __next_cpu()
>
> +add-support-for-it8212-ide-controllers.patch
>
>  More IDE device support
>
> +drivers-net-wan-cycx_x25c189-warning-conflicting-types.patch
>
>  Warning fix
>
> +watchdog-fix-warning-defined-but-not-used.patch
>
>  Wanring fix
>
> +fix-pci-access-mode-dependences-in-arch-i386-kconfig.patch
>
>  Kconfig dependency fix
>
> +drivers-block-ubc-6.patch
> +ub-warning-fixes.patch
>
>  Add simple USB block driver.  No documentation so you're on your own with
>  this one.
>
> +i386-hotplug-cpu.patch
>
>  Add i386 CPU hotplug support. No documentation so you're on your own with
>  this one.
>
> +token-based-thrashing-control.patch
> +token-based-thrashing-control-remove-debug.patch
>
>  VM load control.
>
> +writeback-page-range-hint.patch
> +fix-writeback-page-range-to-use-exact-limits.patch
> +mpage-writepages-range-limit-fix.patch
> +filemap_fdatawrite-range-interface.patch
> +concurrent-o_sync-write-support.patch
>
>  O_SYNC writeback speedups.
>
> +nfsd-force-server-side-tcp-when-nfsv4-enabled.patch
> +nfsd-nfsd-is-missing-a-put_group_info-in-the-auth_null.patch
> +nfsd-make-cache_init-initialize-reference-count-to-1.patch
> +nfsd-simplify-auth_domain_lookup.patch
> +nfsd-fix-ip_map-cache-reference-count-leak.patch
> +nfsd-basic-v4-acl-definitions.patch
> +nfsd-posix-nfsv4-acl-translation-for-nfsd.patch
> +nfsd-acl-support-for-the-nfsv4-server.patch
>
>  kNFSD update
>
> +bridge-build-fix.patch
>
>  Fix the build.
>
>
>
>
>
> All 388 patches:
>
>
> linus.patch
>
> sched-use-for_each_cpu.patch
>   sched: use for_each_cpu
>
> fix-bsd-accounting-cross-platform-compatibility.patch
>   Fix BSD accounting cross-platform compatibility
>
> sysfs-backing-store-add-sysfs_dirent-to-sysfs-dentry.patch
>   sysfs backing store: add sysfs_dirent to sysfs dentry
>
> sysfs-backing-store-use-sysfs_dirent-tree-for-readdir-etc.patch
>   sysfs backing store: use sysfs_dirent tree for ->readdir etc.
>
> sysfs-backing-store-free-sysfs_dirent-on-file-removal.patch
>   sysfs backing store: free sysfs_dirent on file removal
>
> sysfs-backing-store-change-sysfs_file_operations.patch
>   sysfs backing store: change sysfs_file_operations
>
> sysfs-backing-store-stop-pinning-dentries-inodes-for-leaves.patch
>   sysfs backing store: stop pinning dentries & inodes for leaves
>
> bk-acpi.patch
>
> bk-alsa.patch
>
> bk-dma-declare-coherent-memory.patch
>
> bk-cpufreq.patch
>
> bk-drm.patch
>
> bk-ieee1394.patch
>
> bk-input.patch
>
> bk-libata.patch
>
> bk-netdev.patch
>
> bk-ntfs.patch
>
> bk-pci.patch
>
> bk-pnp.patch
>
> bk-power.patch
>
> bk-scsi.patch
>
> bk-usb.patch
>
> mm.patch
>   add -mmN to EXTRAVERSION
>
> longhaul-fix.patch
>   longhaul build fix
>
> bk-netdev-axnet_cs-fix.patch
>   bk-netdev-axnet_cs-fix
>
> bk-netdev-hp-plus-fix.patch
>   bk-netdev-hp-plus-fix
>
> bk-power-x86_64-fix.patch
>   bk-power x86_64 fixes
>
> mm-swsusp-make-sure-we-do-not-return-to-userspace-where-image-is-on-disk.pa
>tch -mm swsusp: make sure we do not return to userspace where image is on
> disk
>
> mm-swsusp-copy_page-is-harmfull.patch
>   -mm swsusp: copy_page is harmfull
>
> nmi-trigger-switch-support-for-debuggingupdated.patch
>   NMI trigger switch support for debugging(updated)
>
> nmi-trigger-switch-support-for-debuggingupdated-fix.patch
>   nmi-trigger-switch-support-for-debuggingupdated-fix
>
> make-i386-die-more-resilient-against-recursive-errors.patch
>   Make i386 die() more resilient against recursive errors
>
> kgdb-ga.patch
>   kgdb stub for ia32 (George Anzinger's one)
>   kgdbL warning fix
>   kgdb buffer overflow fix
>   kgdbL warning fix
>   kgdb: CONFIG_DEBUG_INFO fix
>   x86_64 fixes
>   correct kgdb.txt Documentation link (against  2.6.1-rc1-mm2)
>   kgdb: fix for recent gcc
>   kgdb warning fixes
>   THREAD_SIZE fixes for kgdb
>   Fix stack overflow test for non-8k stacks
>   kgdb-ga.patch fix for i386 single-step into sysenter
>   fix TRAP_BAD_SYSCALL_EXITS on i386
>   add TRAP_BAD_SYSCALL_EXITS config for i386
>
> kgdboe-netpoll.patch
>   kgdb-over-ethernet via netpoll
>   kgdboe: fix configuration of MAC address
>
> kgdb-x86_64-support.patch
>   kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
>   kgdb-x86_64-warning-fixes
>
> kgdb-ia64-support.patch
>   IA64 kgdb support
>   ia64 kgdb repair and cleanup
>   ia64 kgdb fix
>
> kgdb-ia64-fixes.patch
>   kgdb: ia64 fixes
>
> make-tree_lock-an-rwlock.patch
>   make mapping->tree_lock an rwlock
>
> radix_tree_tag_set-atomic.patch
>   Make radix_tree_tag_set/clear atomic wrt the tag
>
> radix_tree_tag_set-only-needs-read_lock.patch
>   radix_tree_tag_set only needs read_lock()
>
> must-fix.patch
>   must fix lists update
>   must fix list update
>   mustfix update
>
> must-fix-update-5.patch
>   must-fix update
>
> mustfix-lists.patch
>   mustfix lists
>
> ppc64-__make_room-warning-fix.patch
>   ppc64: __make_room() warning fix
>
> ppc64-fix-off-by-one-in-mem_init.patch
>   ppc64: fix off-by-one in mem_init()
>
> ppc64-struct-pci_controller-cleanup.patch
>   ppc64: struct pci_controller cleanup
>
> ppc64-isa-device-tree-node-refcount-fix.patch
>   ppc64: ISA device tree node refcount fix
>
> ppc64-fix-ras-irq-handlers.patch
>   ppc64: fix RAS irq handlers
>
> ppc64-fix-hotplug-irq-migration-code.patch
>   ppc64: fix hotplug irq migration code
>
> ppc64-fix-cpu_up-race.patch
>   ppc64: Fix cpu_up race
>
> ppc64-improve-slb-reload.patch
>   ppc64: improve SLB reload
>
> ppc64-remove-include-processorh-from-div64s.patch
>   ppc64: remove #include processor.h from div64.S
>
> ppc32-support-for-mpc8560-cpu-and-boards.patch
>   ppc32: Support for MPC8560 CPU and boards
>
> ppc32-support-for-mpc8555-cpu-and-board.patch
>   ppc32: support for MPC8555 CPU and board
>
> ppc64-reloc_hide.patch
>
> invalidate_inodes-speedup.patch
>   invalidate_inodes speedup
>   more invalidate_inodes speedup fixes
>
> dev-mem-restriction-patch.patch
>   /dev/mem restriction patch
>
> get_user_pages-handle-VM_IO.patch
>   fix get_user_pages() against mappings of /dev/mem
>
> fa311-mac-address-fix.patch
>   wrong mac address with netgear FA311 ethernet card
>
> pid_max-fix.patch
>   Bug when setting pid_max > 32k
>
> jbd-remove-livelock-avoidance.patch
>   JBD: remove livelock avoidance code in journal_dirty_data()
>
> journal_add_journal_head-debug.patch
>   journal_add_journal_head-debug
>
> list_del-debug.patch
>   list_del debug check
>
> oops-dump-preceding-code.patch
>   i386 oops output: dump preceding code
>
> lockmeter.patch
>   lockmeter
>   ia64 CONFIG_LOCKMETER fix
>
> unplug-can-sleep.patch
>   unplug functions can sleep
>
> firestream-warnings.patch
>   firestream warnings
>
> ext3_rsv_cleanup.patch
>   ext3 block reservation patch set -- ext3 preallocation cleanup
>
> ext3_rsv_base.patch
>   ext3 block reservation patch set -- ext3 block reservation
>   ext3 reservations: fix performance regression
>   ext3 block reservation patch set -- mount and ioctl feature
>   ext3 block reservation patch set -- dynamically increase reservation
> window ext3 reservation ifdef cleanup patch
>   ext3 reservation max window size check patch
>   ext3 reservation file ioctl fix
>
> ext3-reservation-default-on.patch
>   ext3 reservation: default to on
>
> ext3-lazy-discard-reservation-window-patch.patch
>   ext3 lazy discard reservation window patch
>   ext3 discard reservation in last iput fix patch
>   Fix lazy reservation discard
>   ext3 reservations: bad_inode fix
>   ext3 reservation discard race fix
>
> hugetlb_shm_group-sysctl-gid-0-fix.patch
>   hugetlb_shm_group sysctl-gid-0-fix
>
> really-ptrace-single-step-2.patch
>   ptrace single-stepping fix
>
> ipr-ppc64-depends.patch
>   Make ipr.c require ppc
>
> disk-barrier-core.patch
>   disk barriers: core
>   disk-barrier-core-tweaks
>
> disk-barrier-ide.patch
>   disk barriers: IDE
>   disk-barrier-ide-symbol-expoprt
>   disk-barrier ide warning fix
>
> barrier-update.patch
>   barrier update
>
> barrier-flushing-fix.patch
>   barrier flushing fix
>
> disk-barrier-scsi.patch
>   disk barriers: scsi
>
> disk-barrier-dm.patch
>   disk barriers: devicemapper
>
> disk-barrier-md.patch
>   disk barriers: MD
>
> reiserfs-v3-barrier-support.patch
>   reiserfs v3 barrier support
>   reiserfs-v3-barrier-support-tweak
>
> sync_dirty_buffer-retval.patch
>   make sync_dirty_buffer() return something useful
>
> ext3-barrier-support.patch
>   ext3 barrier support
>
> jbd-barrier-fallback-on-failure.patch
>   jbd: barrier fallback on failure
>
> ide-print-failed-opcode.patch
>   ide: print failed opcode on IO errors
>   From: Jens Axboe <axboe@suse.de>
>   Subject: Re: ide errors in 7-rc1-mm1 and later
>
> add-bh_eopnotsupp-for-testing.patch
>   add BH_Eopnotsupp for testing async barrier failures
>
> handle-async-barrier-failures.patch
>   Handle async barrier failures
>
> tty_io-hangup-locking.patch
>   tty_io.c hangup locking
>
> perfctr-core.patch
>   From: Mikael Pettersson <mikpe@csd.uu.se>
>   Subject: [PATCH][1/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: core
>   CONFIG_PERFCTR=n build fix
>   From: Mikael Pettersson <mikpe@csd.uu.se>
>   Subject: [PATCH][6/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: misc
>
> perfctr-i386.patch
>   From: Mikael Pettersson <mikpe@csd.uu.se>
>   Subject: [PATCH][2/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: i386
>   perfctr #if/#ifdef cleanup
>   perfctr Dothan support
>   perfctr x86_tests build fix
>
> perfctr-x86-init-bug.patch
>   perfctr x86 init bug
>
> perfctr-k8-fix-for-internal-benchmarking-code.patch
>   perfctr: K8 fix for internal benchmarking code
>
> perfctr-x86_64.patch
>   From: Mikael Pettersson <mikpe@csd.uu.se>
>   Subject: [PATCH][3/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: x86_64
>
> perfctr-ppc.patch
>   From: Mikael Pettersson <mikpe@csd.uu.se>
>   Subject: [PATCH][4/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: PowerPC
>   perfctr ppc32 update
>   perfctr update 4/6: PPC32 cleanups
>
> perfctr-ppc32-buglet-fix.patch
>   perfctr ppc32 buglet fix
>
> perfctr-virtualised-counters.patch
>   From: Mikael Pettersson <mikpe@csd.uu.se>
>   Subject: [PATCH][5/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: virtualised
> counters perfctr update 6/6: misc minor cleanups
>   perfctr update 3/6: __user annotations
>   perfctr-cpus_complement-fix
>   perfctr cpumask cleanup
>
> perfctr-ifdef-cleanup.patch
>   perfctr ifdef cleanup
>
> perfctr-update-2-6-kconfig-related-updates.patch
>   perfctr update 2/6: Kconfig-related updates
>
> perfctr-update-5-6-reduce-stack-usage.patch
>   perfctr update 5/6: reduce stack usage
>
> perfctr-low-level-documentation.patch
>   perfctr low-level documentation
>
> perfctr-documentation-update.patch
>   perfctr documentation update
>
> perfctr-inheritance-1-3-driver-updates.patch
>   perfctr inheritance 1/3: driver updates
>
> perfctr-inheritance-illegal-sleep-bug.patch
>   perfctr inheritance illegal sleep bug
>
> perfctr-inheritance-2-3-kernel-updates.patch
>   perfctr inheritance 2/3: kernel updates
>
> perfctr-inheritance-3-3-documentation-updates.patch
>   perfctr inheritance 3/3: documentation updates
>
> ext3-online-resize-patch.patch
>   ext3: online resizing
>
> ext3-online-resize-warning-fix.patch
>   ext3-online-resize-warning-fix
>
> sched-clean-init-idle.patch
>   sched: cleanup init_idle()
>
> sched-clean-fork.patch
>   sched: cleanup, improve sched <=> fork APIs
>
> sched-clean-fork-rename-wake_up_new_process-wake_up_new_task.patch
>   sched: rename wake_up_new_process -> wake_up_new_task
>
> kernelthread-idle-fix-2.patch
>   kernel thread idle fix
>
> sched-misc-cleanups-2.patch
>   sched: misc cleanups #2
>
> sched-unlikely-rt_task.patch
>   sched: make rt_task unlikely
>
> sched-misc.patch
>   sched: sched misc changes
>
> sched-misc-fix-rt.patch
>   sched: fix RT scheduling & interactivity estimator
>
> sched-no-balance-clone.patch
>   sched: disable balance on clone
>
> sched-remove-balance-clone.patch
>   sched: remove balance on clone
>
> sched-fork-hotplug-cleanuppatch.patch
>   sched: fork hotplug hanling cleanup
>
> sched-consolidate-sched-domains.patch
>   sched: consolidate sched domains
>
> sched-consolidate-domains-fix.patch
>   sched: fix for sched-consolidate-domains
>
> sched-consolidate-domains-fix-2.patch
>   another sched consolidate domains fix
>
> sched-domain-node-span-4.patch
>   sched: limit cpuspan of node scheduler domains
>
> sched-merge-fix.patch
>   sched: merge fix
>
> sched-domain-node-span-4-warning-fix.patch
>   sched-domain-node-span-4-warning-fix
>
> sched-isolated-sched-domains.patch
>   sched: isolated sched domains
>
> sched-isolated-sched-domains-fix.patch
>   sched-isolated-sched-domains-fix
>
> create-cpu_sibling_map-for-ppc64.patch
>   Create cpu_sibling_map for PPC64
>
> create-cpu_sibling_map-for-ppc64-fix.patch
>   create-cpu_sibling_map-for-ppc64-fix
>
> sched-adjust-p4-per-cpu-gain.patch
>   sched: adjust p4 per-cpu gain
>
> memory-backed-inodes-fix.patch
>   memory-backed inodes fix
>
> ext3_bread-cleanup.patch
>   ext3_bread() cleanup
>
> flexible-mmap-2.6.7-mm3-A8.patch
>   i386 virtual memory layout rework
>
> flexible-mmap-bug-fix.patch
>   flexible-mmap BUG fix
>
> flexible-mmap-updatepatch-267-mm5.patch
>   flexible-mmap update
>
> sysctl-tunable-for-flexmmap.patch
>   sysctl tunable for flexmmap
>
> legacy_va_layout-docs.patch
>   legacy_va_layout docs
>
> driver-model-and-sysfs-support-for-pcmcia-1-3.patch
>   driver model and sysfs support for PCMCIA (1/3)
>
> driver-model-and-sysfs-support-for-pcmcia-update.patch
>   driver model and sysfs support for PCMCIA update
>
> update-drivers-net-pcmcia-2-3.patch
>   update drivers/net/pcmcia (2/3)
>
> update-drivers-net-wireless-3-3.patch
>   update drivers/net/wireless (3/3)
>
> posix-locking-fix-to-posix_same_owner.patch
>   posix locking: Minimal fix to posix_same_owner()
>
> posix-locking-fix-to-locking-code.patch
>   posix locking: more locking code fixes
>
> posix-locking-fix-up-nfs4statec.patch
>   posix locking: Fix up nfs4state.c
>
> posix-locking-fix-up-lockd.patch
>   posix locking: Fix up lockd to make use of the new interface
>
> posix-locking-fl_owner_t-to-pid-mapping.patch
>   posix locking: mapping between fl_owner_t and client-side "pid"
>
> dvdrw-support-for-267-bk13.patch
>   DVD+RW support for 2.6.7-bk13
>
> cdrw-packet-writing-support-for-267-bk13.patch
>   CDRW packet writing support
>
> packet-remove-warning.patch
>   packet: remove #warning
>
> packet-door-unlock.patch
>   packet writing: door unlocking fix
>
> pkt_lock_door-warning-fix.patch
>   pkt_lock_door() warning fix
>
> dvd-rw-packet-writing-update.patch
>   Packet writing support for DVD-RW and DVD+RW discs.
>
> fix-race-in-pktcdvd-kernel-thread-handling.patch
>   Fix race in pktcdvd kernel thread handling
>
> fix-open-close-races-in-pktcdvd.patch
>   Fix open/close races in pktcdvd
>
> packet-writing-review-fixups.patch
>   packet writing: review fixups
>
> remove-pkt_dev-from-struct-pktcdvd_device.patch
>   Remove pkt_dev from struct pktcdvd_device
>
> packet-writing-docco.patch
>   packet writing documentation
>
> trivial-cdrw-packet-writing-doc-update.patch
>   Trivial CDRW packet writing doc update
>
> convert-packet-writing-to-seq_file.patch
>   packet writing: convert to seq_file
>
> control-pktcdvd-with-an-auxiliary-character-device.patch
>   Control pktcdvd with an auxiliary character device
>
> control-pktcdvd-with-an-auxiliary-character-device-fix.patch
>   control-pktcdvd-with-an-auxiliary-character-device-fix
>
> simplified-request-size-handling-in-cdrw-packet-writing.patch
>   Simplified request size handling in CDRW packet writing
>
> fix-setting-of-maximum-read-speed-in-cdrw-packet-writing.patch
>   Fix setting of maximum read speed in CDRW packet writing
>
> r8169_napi-help-text-2.patch
>   R8169_NAPI help text
>
> no-sysgood-for-ptrace-singlestep.patch
>   Don't use SYSGOOD for ptrace singlestep
>
> err2-6-hashbin_remove_this-locking-fix.patch
>   err2-6: hashbin_remove_this() locking fix
>
> dm-use-idr.patch
>   devicemapper: use an IDR tree for tracking minors
>
> ipc-1-3-add-refcount-to-ipc_rcu_alloc.patch
>   ipc: Add refcount to ipc_rcu_alloc
>
> ipc-2-3-remove-sem_revalidate.patch
>   ipc: remove sem_revalidate
>
> ipc-3-3-enforce-semvmx-limit-for-undo.patch
>   ipc: enforce SEMVMX limit for undo
>
> cleanup-of-ipc-msgc.patch
>   cleanup of ipc/msg.c
>
> sk98lin-procfs-fix.patch
>   sk98lin procfs fix
>
> cpufreq-driver-for-nforce2-kernel-267.patch
>   cpufreq driver for nForce2
>
> allow-modular-ide-pnp.patch
>   allow modular ide-pnp
>
> uml-base-patch.patch
>   uml: Uml base patch
>
> rename-uml-console-device.patch
>   uml: rename console_device
>
> uml-readds-just-for-now-ghashh-for-uml.patch
>   uml: Readds (just for now) ghash.h for UML
>
> uml-avoid-that-gcc-breaks-uml-with-unit-at-a-time-compilation-mode.patch
>   uml: Avoid that gcc breaks UML with "unit at a time" compilation mode.
>
> uml-fixes-an-host-fd-leak-caused-by-hostfs.patch
>   uml: Fixes an host fd leak caused by hostfs.
>
> uml-adds-legacy_pty-config-option.patch
>   uml: Adds LEGACY_PTY config option
>
> uml-makes-make-help-arch=um-work.patch
>   uml: Makes "make help ARCH=um" work.
>
> uml-fixes-fixdepc-to-support-arch-um-include-uml-configh.patch
>   uml: Fixes "fixdep.c" to support arch/um/include/uml-config.h.
>
> uml-kill-useless-warnings.patch
>   uml: Kill useless warnings
>
> uml-avoids-compile-failure-when-host-misses-tkill.patch
>   uml: Avoids compile failure when host misses tkill().
>
> uml-reduces-code-in-_user-files-by-moving-it-in-_kern-files-if-already-poss
>ible.patch uml: Reduces code in *_user files, by moving it in _kern files if
> already possible.
>
> uml-fixes-raw-and-uses-it-in-check_one_sigio-also-fixes-a-silly-panic-eintr
>-returned-by-call.patch uml: Fixes raw() and uses it in check_one_sigio;
> also fixes a silly panic (EINTR returned by call).
>
> uml-folds-hostaudio_userc-into-hostaudio_kernc.patch
>   uml: Folds hostaudio_user.c into hostaudio_kern.c.
>
> uml-use-ptrace_scemu-the-so-called-sysemu-to-reduce-syscall-cost.patch
>   uml: Use PTRACE_SCEMU (the so-called SYSEMU) to reduce syscall cost.
>
> uml-adds-the-nosysemu-command-line-parameter-to-disable-sysemu.patch
>   uml: Adds the "nosysemu" command line parameter to disable SYSEMU
>
> uml-adds-proc-sysemu-to-toggle-sysemu-usage.patch
>   uml: Adds /proc/sysemu to toggle SYSEMU usage.
>
> uml-fix-for-sysemu-patches.patch
>   uml: Fix for sysemu patches
>
> uml-handles-correctly-errno-==-eintr-in-lots-of-places.patch
>   uml: Handles correctly errno == EINTR in lots of places.
>
> uml-adds-some-exports.patch
>   uml: Adds some exports
>
> uml-avoids-a-panic-for-a-legal-situation.patch
>   uml: Avoids a panic for a legal situation
>
> uml-removes-dead-code-in-trap_kernc.patch
>   uml: Removes dead code in trap_kern.c
>
> uml-make-malloc-call-vmalloc-if-needed-needed-for-hostfs-on-26-host.patch
>   uml: Make malloc() call vmalloc if needed. Needed for hostfs on 2.6 host.
>
> uml-little-kmalloc.patch
>   uml: little-kmalloc
>
> uml-fix-os_process_pc-and-os_process_parent-for-corner-cases.patch
>   uml: Fix os_process_pc and os_process_parent for corner cases.
>
> uml-remove-a-group-of-unused-bh-functions.patch
>   uml: remove a group of unused bh functions
>
> fix-warnings-in-net-irda.patch
>   sparse: fix warnings in net/irda/*
>
> i810_audio-fix-the-error-path-of-resource-management.patch
>   i810_audio: Fix the error path of resource management
>
> fix-drivers-isdn-hisax-avm_pcic-build-warning-when.patch
>   Fix drivers/isdn/hisax/avm_pci.c build warning when !CONFIG_ISAPNP
>
> idr-stale-comment.patch
>   idr.c: remove stale comment
>
> bio_copy_user-cleanups.patch
>   bio_copy_user() cleanups
>
> idr-comments-updates.patch
>   idr comments updates
>
> schedule-profiling.patch
>   schedule() profiling
>   From: Arjan van de Ven <arjanv@redhat.com>
>   Subject: Re: schedule profileing
>
> add-a-few-might_sleep-checks.patch
>   Add a few might_sleep() checks
>
> add-a-few-might_sleep-checks-fix.patch
>   add-a-few-might_sleep-checks fix
>
> release_task-may-sleep.patch
>   permit sleeping in release_task()
>
> crc16-renaming-in-via-velocity-ethernet-driver.patch
>   CRC16 renaming in VIA Velocity ethernet driver
>
> per_cpu-per_cpu-cpu_gdt_table.patch
>   percpu: cpu_gdt_table
>
> per_cpu-per_cpu-cpu_gdt_table-fix.patch
>   per_cpu-per_cpu-cpu_gdt_table-fix
>
> per_cpu-per_cpu-init_tss.patch
>   percpu: init_tss
>
> per_cpu-per_cpu-cpu_tlbstate.patch
>   percpu: cpu_tlbstate
>
> gcc35-alps_tdlb7.c.patch
>   gcc-3.5 fixes
>
> gcc35-always-inline.patch
>   gcc-3.5 fixes
>
> gcc35-auerswald.c.patch
>   gcc-3.5 fixes
>
> gcc35-dabusb.c.patch
>   gcc-3.5 fixes
>
> gcc35-ds.c.patch
>   gcc-3.5 fixes
>
> gcc35-fixmap.h.patch
>   gcc-3.5 fixes
>
> gcc35-mtrr.h.patch
>   gcc-3.5 fixes
>
> gcc35-sonypi.patch
>   gcc-3.5 fixes
>
> gcc35-sp887x.c.patch
>   gcc-3.5 fixes
>
> gcc35-tda1004x.c.patch
>   gcc-3.5 fixes
>
> gcc35-transport.h.patch
>   gcc-3.5 fixes
>
> gcc35-ufs_fs.h.patch
>   gcc-3.5 fixes
>
> gcc35-videodev.c.patch
>   gcc-3.5 fixes
>
> gcc35-wavefront_fx.c.patch
>   gcc-3.5 fixes
>
> dev-zero-vs-hugetlb-mappings.patch
>   /dev/zero vs hugetlb mappings.
>
> hugetlbfs-private-mappings.patch
>   hugetlbfs private mappings
>
> net-kconfig-crc16-fix.patch
>   net/Kconfig crc16 warning fix
>
> preset-loops_per_jiffy-for-faster-booting.patch
>   preset loops_per_jiffy for faster booting
>
> define-inline-as-__attribute__always_inline-also-for-gcc-=-34.patch
>   #define inline as __attribute__((always_inline)) also for gcc >= 3.4
>
> gcc-34-and-broken-inlining.patch
>   clean up __always_inline__ usage
>
> handle-undefined-symbols.patch
>   Fail if vmlinux contains undefined symbols
>
> 268-rc2-mm1-link-errors.patch
>   put irq stacks back into bss
>
> split-generic_file_aio_write-into-buffered-and-direct-i-o-parts.patch
>   split generic_file_aio_write into buffered and direct I/O parts
>
> radeonfb-cleanup-and-little-fixes.patch
>   radeonfb: cleanup and little fixes
>
> making-i-dhash_entries-cmdline-work-as-it-use-to.patch
>   Make i/dhash_entries cmdline work as it use to.
>
> making-i-dhash_entries-cmdline-work-as-it-use-to-fix.patch
>   making-i-dhash_entries-cmdline-work-as-it-use-to-fix
>
> rivafb-i2c-fixes.patch
>   Rivafb I2C fixes
>
> jbd-recovery-latency-fix.patch
>   jbd recovery latency fix
>
> truncate_inode_pages-latency-fix.patch
>   truncate_inode_pages-latency-fix
>
> journal_clean_checkpoint_list-latency-fix.patch
>   journal_clean_checkpoint_list latency fix
>
> journal_clean_checkpoint_list-latency-fix-fix.patch
>   journal_clean_checkpoint_list-latency-fix-fix
>
> kjournald-smp-latency-fix.patch
>   kjournald-smp-latency-fix
>
> unmap_vmas-smp-latency-fix.patch
>   unmap_vmas-smp-latency-fix
>
> __cleanup_transaction-latency-fix.patch
>   __cleanup_transaction-latency-fix
>
> prune_dcache-latency-fix.patch
>   prune_dcache-latency-fix
>
> filemap_sync-latency-fix.patch
>   filemap_sync-latency-fix
>
> slab-latency-fix.patch
>   slab-latency-fix
>
> get_user_pages-latency-fix.patch
>   get_user_pages-latency-fix
>
> oom-show_free_areas.patch
>   oom-killer: call show_free_areas
>
> send_IPI_mask_bitmask-build-fix.patch
>   send_IPI_mask_bitmask() build fix
>
> e1000-build-fix.patch
>   e1000 build fix
>
> e1000-inlining-fix.patch
>   e1000 inlining fix
>
> pty_write-latency-fix.patch
>   pty_write-latency-fix
>
> enable-all-events-for-initramfs.patch
>   Enable all events for initramfs
>
> arch-i386-kernel-smpc-gcc341-inlining-fix.patch
>   arch/i386/kernel/smp.c gcc341 inlining fix
>
> fix-menuconfig-partial-inability-to-show-help-texts.patch
>   Fix menuconfig partial inability to show help texts.
>
> was-removal-of-sync-in-panic.patch
>   remove sync() from panic
>
> move-cache_reap-out-of-timer-context.patch
>   Move cache_reap out of timer context
>
> move-cache_reap-out-of-timer-context-fix.patch
>   move-cache_reap-out-of-timer-context-fix
>
> gettimeofday-nanoseconds-patch-makes-it-possible-for-the-posix-timer.patch
>   gettimeofday nanoseconds patch
>
> quiet-down-per-zone-memory-stats.patch
>   quieten down per-zone memory stats
>
> x86-64-singlestep-through-sigreturn-system-call-2.patch
>   Fix x86-64 singlestep through sigreturn system call
>
> create-nodemask_t.patch
>   Create nodemask_t
>
> fat-kill-nls-default.patch
>   FAT: kill nls default
>
> add-ixdp2x01-board-support-to-cs89x0-driver.patch
>   Add IXDP2x01 board support to CS89x0 driver
>
> msi-stop-using-dev-bus-ops-directly-in-msic.patch
>   MSI: stop using dev->bus->ops directly in msi.c
>
> msi-msi-msi-x-api-updates.patch
>   MSI: MSI/MSI-X API updates
>
> rename-config_pci_use_vector-to-config_pci_msi.patch
>   rename CONFIG_PCI_USE_VECTOR to CONFIG_PCI_MSI
>
> remove-dead-prototypes.patch
>   remove dead prototypes
>
> s390-use-include-asm-generic-dma-mapping-brokenh.patch
>   s390: Use include/asm-generic/dma-mapping-broken.h
>
> cdrom-get_last_written-fix.patch
>   Subject: cdrom.c get_last_written fixup
>
> intel8x0c-to-include-ck804-audio-support.patch
>   intel8x0.c to include CK804 audio support
>
> get_random_bytes-returns-the-same-on-every-boot.patch
>   get_random_bytes() returns the same on every boot
>
> locking-optimization-for-cache_reap.patch
>   slab: locking optimization for cache_reap
>
> b44-add-47xx-support.patch
>   b44: add 47xx support
>
> fbmon-edd-blacklist.patch
>   fbcom: EDD-based blacklisting
>
> signal-race-fix.patch
>   signal handling race fix
>
> signal-race-fix-ia64.patch
>   signal-race-fix: ia64
>
> signal-race-fix-s390.patch
>   signal-race fixes for s390
>
> signal-race-fix-s390-fix.patch
>   s390 signal handling fixes
>
> signal-race-fix-x86_64.patch
>   signal-race-fixes: x86-64 support
>
> signal-race-fix-x86_64-fix.patch
>   x86_64 signal handling fix
>
> ppc-signal-handling-fixes.patch
>   ppc signal handling fixes
>
> signal-race-fixes-sparc-sparc64.patch
>   signal handling race fixes: sparc and sparc64
>
> signal-race-fixes-ppc64.patch
>   pPC64 signal race fix patch
>
> process-aggregates.patch
>   Process Aggregates (PAGG)
>
> process-aggregates-warning-fix.patch
>   process-aggregates warning fix
>
> d_unhash-consolidation.patch
>   d_unhash consolidation
>
> allow-x86_64-to-reenable-interrupts-on-contention.patch
>   Allow x86_64 to reenable interrupts on contention
>
> move-pit-code-to-timer_pit.patch
>   x86: move PIT code to timer_pit
>
> move-pit-code-to-timer_pit-warning-fix.patch
>   move-pit-code-to-timer_pit-warning-fix
>
> i2o-build_99.patch
>   i20 rewrite
>
> i2o-build_99-gcc295-fixes.patch
>   i2o-build_99-gcc295-fixes
>
> i2o-resync-with-post-266-changes.patch
>   i2o: resync with post-2.6.6 changes
>
> i2o-resync-with-post-266-changes-2.patch
>   i2o: more resyncing with post-2.6.6 changes
>
> activate-smbus-device-on-hp-d300l.patch
>   activate SMBus device on hp d300l
>
> apic-output-reduction.patch
>   IO-APIC debug message reduction
>
> fix-ide-probe-double-detection.patch
>   Fix ide probe double detection
>
> fix-smm-failures-on-e750x-systems.patch
>   fix SMM failures on E750x systems
>
> serial-cs-and-unusable-port-size-ranges.patch
>   serial-cs and unusable port size ranges
>
> make-shrinker_sem-an-rwsem.patch
>   make shrinker_sem an rwsem
>
> vlan-support-for-3c59x-3c90x.patch
>   VLAN support for 3c59x/3c90x
>
> add-support-for-innovision-dm-8401h.patch
>   Add support for Innovision DM-8401H
>
> break-out-zone-free-list-initialization.patch
>   break out zone free list initialization
>
> fbcon-differentiate-bits_per_pixel-from-color-depth.patch
>   fbcon: ifferentiate bits_per_pixel from color depth
>
> fbcon-differentiate-bits_per_pixel-from-color-depth-fixup.patch
>   fbcon-differentiate-bits_per_pixel-from-color-depth-fixup
>
> fbcon-differentiate-bits_per_pixel-from-color-depth-export.patch
>   fbcon-differentiate-bits_per_pixel-from-color-depth-export
>
> fbdev-set-color-fields-correctly.patch
>   fbdev: set color fields correctly
>
> fbdev-attn-maintainers-set-correct-hardware-capabilities.patch
>   fbdev: ATTN: Maintainers - Set correct hardware capabilities
>
> rivafb-do-not-tap-vga-ports-if-not-x86.patch
>   rivafb: Do not tap VGA ports if not X86
>
> i810fb-fixes.patch
>   i810fb fixes
>
> i810fb-fixes-2.patch
>   i810fb fixes #2
>
> drm-optimisation.patch
>   drm optimisation
>
> maintainers-update.patch
>   MAINTAINERS update
>
> fdomain-isa-fixup.patch
>   fdomain_cs ISA fix
>
> net-smc9194c-fix-inline-compile-errors-fwd.patch
>   net/smc9194.c: fix gcc-3.5 inline compile errors
>
> net-hamachic-remove-bogus-inline-at-function-prototype.patch
>   net/hamachi.c: gcc-3.5 build fixes
>
> scsi-qla2xxx-fix-inline-compile-errors.patch
>   qla2xxx gcc-3.5 fixes
>
> net-rrunnerc-fix-inline-compile-error.patch
>   net/rrunner.c: gcc-3.5 fixes
>
> istallion-remove-inlines.patch
>   istallion: gcc-3.5 fixes
>
> mxserc-fix-inlines-fwd.patch
>   mxser.c: gcc-3.5 fixes
>
> radio-maestroc-remove-an-inline-fwd.patch
>   radio-maestro.c: gcc-3.5 fixes
>
> modular-swim3.patch
>   modular swim3
>
> modular-anscd.patch
>   Fix modular anscd
>
> jffs2_compression_options-fix.patch
>   JFFS2_COMPRESSION_OPTIONS dependency fix
>
> ppc8xx-maintainer-patch.patch
>   PPC8xx Maintainer patch
>
> ext2_readdir-filp-f_pos-fix.patch
>   ext2_readdir() filp->f_pos fix
>
> netfilter-ip_nat_snmp_basicc-fix-inlines-fwd.patch
>   netfilter/ip_nat_snmp_basic.c: gcc-3.5 fixes
>
> net-tulip-dmfec-fix-inline-compile-errors-fwd.patch
>   net/tulip/dmfe.c: gcc-3.5 fixes
>
> do_general_protection-doesnt-disable-irq.patch
>   do_general_protection doesn't disable irq
>
> jbd-jh-unmapping-race-fix.patch
>   jbd-jh-unmapping-race-fix
>
> nfs4-oops-fixes.patch
>   nsf4 oops fixes
>
> proc_pid_cmdline-race-fix.patch
>   proc_pid_cmdline() race fix
>
> support-for-exar-xr17c158-octal-uart.patch
>   Support for Exar XR17C158 Octal UART
>
> dvb-errno-removal.patch
>   DVB: "errno" undefined
>
> x86-64-merge-for-268rc2-mm1.patch
>   x86-64 merge for 2.6.8rc2-mm1
>
> ia64-swiotlb-fixes.patch
>   ia64: Various swiotlb fixes
>
> documentation-fix-for-nmi-watchdog.patch
>   Documentation fix for NMI watchdog
>
> hpet-copyrights-cleanup.patch
>   HPET copyrights, cleanup
>
> remove-outdated-reference-to-documentation-arm-sa1100-pcmcia-fwd.patch
>   remove outdated reference to Documentation/arm/SA1100/PCMCIA
>
> canonically-reference-files-in-documentation-code-comments-part.patch
>   Canonically reference files in Documentation/ code comments part
>
> altix-system-controller-communication-driver.patch
>   Altix system controller communication driver
>
> snsc-build-fix.patch
>   snsc-build-fix
>
> move-duplicate-bug-and-warn_on-bits-to-asm-generic.patch
>   move duplicate BUG and WARN_ON bits to asm-generic
>
> fix-con_buf_size-usage.patch
>   Fix CON_BUF_SIZE usage
>
> vprintk-support.patch
>   vprintk support
>
> vprintk-for-ext2-errors.patch
>   vprintk for ext2 errors
>
> vprintk-for-ext3-errors.patch
>   vprintk for ext3 errors
>
> remove-symbol_is.patch
>   Remove symbol_is()
>
> prio_tree-kill-vma_prio_tree_init.patch
>   prio_tree: kill vma_prio_tree_init()
>
> prio_tree-iterator-vma_prio_tree_next-cleanup.patch
>   prio_tree: iterator + vma_prio_tree_next cleanup
>
> rcu-cpu-offline-cleanup.patch
>   RCU - cpu-offline-cleanup
>
> rcu-rcu-cpu-offline-fix.patch
>   RCU - cpu offline fix
>
> rcu-low-latency-rcu.patch
>   RCU: low latency rcu
>
> alpha-print-the-symbol-of-pc-and-ra-during-oops.patch
>   alpha: print the symbol of pc and ra during Oops
>
> staircase-cpu-scheduler-268-rc2-mm1.patch
>   Staircase cpu scheduler
>
> first-next_cpu-returns-values-nr_cpus.patch
>   first/next_cpu returns values > NR_CPUS
>
> first-next_cpu-returns-values-nr_cpus-fix.patch
>   first-next_cpu-returns-values-nr_cpus fix
>
> add-support-for-it8212-ide-controllers.patch
>   Add support for IT8212 IDE controllers
>
> drivers-net-wan-cycx_x25c189-warning-conflicting-types.patch
>   drivers/net/wan/cycx_x25.c:189: warning: conflicting types for built-in
> function 'log2'
>
> watchdog-fix-warning-defined-but-not-used.patch
>   watchdog: fix warning "defined but not used"
>
> fix-pci-access-mode-dependences-in-arch-i386-kconfig.patch
>   fix PCI access mode dependences in arch/i386/Kconfig
>
> drivers-block-ubc-6.patch
>   drivers/block/ub.c #6
>
> ub-warning-fixes.patch
>   ub warning fixes
>
> i386-hotplug-cpu.patch
>   i386 Hotplug CPU
>
> token-based-thrashing-control.patch
>   token based thrashing control
>
> token-based-thrashing-control-remove-debug.patch
>   token-based-thrashing-control-remove-debug
>
> writeback-page-range-hint.patch
>   Writeback page range hint
>
> fix-writeback-page-range-to-use-exact-limits.patch
>   Fix writeback page range to use exact limits
>
> mpage-writepages-range-limit-fix.patch
>   mpage writepages range limit fix
>
> filemap_fdatawrite-range-interface.patch
>   filemap_fdatawrite range interface
>
> concurrent-o_sync-write-support.patch
>   Concurrent O_SYNC write support
>
> fix-inlining-errors-in-drivers-scsi-aic7xxx-aic79xx_osmc.patch
>   inlining errors in drivers/scsi/aic7xxx/aic79xx_osm.c
>
> fix-inline-related-gcc-34-build-failures-in.patch
>   fix inline related gcc 3.4 build failures in drivers/net/wan/dscc4.c
>
> nfsd-force-server-side-tcp-when-nfsv4-enabled.patch
>   nfsd: force server-side TCP when NFSv4 enabled
>
> nfsd-nfsd-is-missing-a-put_group_info-in-the-auth_null.patch
>   nfsd: nfsd is missing a put_group_info in the auth_null
>
> nfsd-make-cache_init-initialize-reference-count-to-1.patch
>   nfsd: make cache_init initialize reference count to 1
>
> nfsd-simplify-auth_domain_lookup.patch
>   nfsd: simplify auth_domain_lookup
>
> nfsd-fix-ip_map-cache-reference-count-leak.patch
>   nfsd: fix ip_map cache reference count leak.
>
> nfsd-basic-v4-acl-definitions.patch
>   nfsd: basic v4 ACL definitions
>
> nfsd-posix-nfsv4-acl-translation-for-nfsd.patch
>   nfsd: POSIX<->NFSv4 acl translation for nfsd
>
> nfsd-acl-support-for-the-nfsv4-server.patch
>   nfsd: ACL support for the NFSv4 server
>
> bridge-build-fix.patch
>   bridge build fix
>
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

- -- 
Mark Watts
Senior Systems Engineer
QinetiQ Trusted Information Management
Trusted Solutions and Services group
GPG Public Key ID: 455420ED

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFBDl5MBn4EFUVUIO0RAipIAJ9u1XlOFfN8/QO+U6gci2kOP03MOQCfaC3Q
nwgA0cV4jlPLdwDiOSOCleg=
=av2L
-----END PGP SIGNATURE-----

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02 15:31 ` 2.6.8-rc2-mm2 Mark Watts
@ 2004-08-02 15:33   ` Jesper Juhl
  2004-08-02 15:38   ` 2.6.8-rc2-mm2 Dominik Karall
  2004-08-03  6:55   ` 2.6.8-rc2-mm2 Clemens Schwaighofer
  2 siblings, 0 replies; 55+ messages in thread
From: Jesper Juhl @ 2004-08-02 15:33 UTC (permalink / raw)
  To: Mark Watts; +Cc: linux-kernel

On Mon, 2 Aug 2004, Mark Watts wrote:

> Stupid question though - do I apply this to 2.6.8rc2 or does it bring 2.6.7 
> up to rc2-mm2 ?

You apply it to rc2.

--
Jesper Juhl <juhl-lkml@dif.dk>


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02 15:31 ` 2.6.8-rc2-mm2 Mark Watts
  2004-08-02 15:33   ` 2.6.8-rc2-mm2 Jesper Juhl
@ 2004-08-02 15:38   ` Dominik Karall
  2004-08-02 16:02     ` 2.6.8-rc2-mm2 Mark Watts
  2004-08-03  6:55   ` 2.6.8-rc2-mm2 Clemens Schwaighofer
  2 siblings, 1 reply; 55+ messages in thread
From: Dominik Karall @ 2004-08-02 15:38 UTC (permalink / raw)
  To: Mark Watts; +Cc: linux-kernel

On Monday 02 August 2004 17:31, Mark Watts wrote:
> Noting the large wad of x86-64 stuff in here, I'm going to give it a whirl.
> Stupid question though - do I apply this to 2.6.8rc2 or does it bring 2.6.7
> up to rc2-mm2 ?
>
> Mark.
>

you must apply to 2.6.8-rc2

dominik

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02  8:55 2.6.8-rc2-mm2 Andrew Morton
                   ` (5 preceding siblings ...)
  2004-08-02 15:31 ` 2.6.8-rc2-mm2 Mark Watts
@ 2004-08-02 15:57 ` Martin Zwickel
  2004-08-02 17:59 ` 2.6.8-rc2-mm2 (compile stats) John Cherry
                   ` (7 subsequent siblings)
  14 siblings, 0 replies; 55+ messages in thread
From: Martin Zwickel @ 2004-08-02 15:57 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 387 bytes --]

Hmm, I tried 2.6.8-rc2-mm2 but the
sound is a little bit jerky under UT2004.

I go back to -rc2-mm1 (that last version that was really great)

ps.: Thanks for the good work, hope the problems will go away soon...

Regards,
Martin

-- 
MyExcuse:
short leg on process table

Martin Zwickel <martin.zwickel@technotrend.de>
Research & Development

TechnoTrend AG <http://www.technotrend.de>

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02 15:38   ` 2.6.8-rc2-mm2 Dominik Karall
@ 2004-08-02 16:02     ` Mark Watts
  0 siblings, 0 replies; 55+ messages in thread
From: Mark Watts @ 2004-08-02 16:02 UTC (permalink / raw)
  To: linux-kernel

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


> On Monday 02 August 2004 17:31, Mark Watts wrote:
> > Noting the large wad of x86-64 stuff in here, I'm going to give it a
> > whirl. Stupid question though - do I apply this to 2.6.8rc2 or does it
> > bring 2.6.7 up to rc2-mm2 ?
> >
> > Mark.
>
> you must apply to 2.6.8-rc2
>
> dominik

Great - compiled up a treat...

Mark.

- -- 
Mark Watts
Senior Systems Engineer
QinetiQ Trusted Information Management
Trusted Solutions and Services group
GPG Public Key ID: 455420ED

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFBDmWnBn4EFUVUIO0RAtueAKCoAYC9v4AVLC1b/OGQZjlUJ9I61gCfav16
8bMpGcs8RgKk9LrnyfqmZD8=
=IARw
-----END PGP SIGNATURE-----

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02 13:52 ` 2.6.8-rc2-mm2 William Lee Irwin III
@ 2004-08-02 16:12   ` William Lee Irwin III
  0 siblings, 0 replies; 55+ messages in thread
From: William Lee Irwin III @ 2004-08-02 16:12 UTC (permalink / raw)
  To: Andrew Morton, linux-kernel

On Mon, Aug 02, 2004 at 06:52:40AM -0700, William Lee Irwin III wrote:
> Speaking of cleanups, I've got a little something.
>  65 files changed, 274 insertions(+), 1076 deletions(-)
> This mass slaughter of duplicated code is a cleanup of /proc/profile
> that consolidates code across all arches and privatizes private state.
> Compiletested on x86-64. Prior incarnations of earlier cleanups this
> is based on were runtime tested on ia32, x86-64, sparc64, and alpha.
> The purpose of these cleanups in their prior incarnations has been for
> use as a preparatory cleanup for profiling other kinds of events in
> /proc/profile's buffer (or similar buffers). There has recently been a
> need to discover which codepaths were responsible for leaking inodes
> that were leaking that similar cleanups in combination with some slab
> profiling hooks are being used to instrument.

Successfully runtime-tested on x86-64 in combination with patches to
unrelated areas of the kernel (poisoning certain portions of certain
data structures that should not need to be allocated and should never
be accessed). Zero userspace-visible changes to output or interface.


-- wli

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2 (compile stats)
  2004-08-02  8:55 2.6.8-rc2-mm2 Andrew Morton
                   ` (6 preceding siblings ...)
  2004-08-02 15:57 ` 2.6.8-rc2-mm2 Martin Zwickel
@ 2004-08-02 17:59 ` John Cherry
  2004-08-02 18:15 ` 2.6.8-rc2-mm2 Peter Osterlund
                   ` (6 subsequent siblings)
  14 siblings, 0 replies; 55+ messages in thread
From: John Cherry @ 2004-08-02 17:59 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel

Linux 2.6 (mm tree) Compile Statistics (gcc 3.2.2)

Kernel            bzImage   bzImage  bzImage  modules  bzImage  modules
                (defconfig) (allno) (allyes) (allyes) (allmod) (allmod)
--------------- ---------- -------- -------- -------- -------- --------
2.6.8-rc2-mm2     0w/0e     4w/5e    87w/9e    4w/0e   1w/0e     80w/0e
2.6.8-rc2-mm1     0w/0e     0w/0e    83w/9e    3w/0e   1w/0e     81w/0e
2.6.8-rc1-mm1     0w/0e     0w/0e    88w/9e    5w/0e   1w/0e     87w/0e
2.6.7-mm7         0w/0e     0w/0e    89w/9e    5w/0e   1w/0e     84w/0e
2.6.7-mm6         0w/0e     0w/0e    85w/9e    5w/0e   1w/0e     80w/0e
2.6.7-mm5         0w/0e     0w/0e    92w/0e    5w/0e   1w/0e     87w/0e
2.6.7-mm4         0w/0e     0w/0e    94w/0e    5w/0e   1w/0e     89w/0e
2.6.7-mm3         0w/0e     0w/0e    90w/6e    5w/0e   1w/0e     86w/0e
2.6.7-mm2         0w/0e     0w/0e   109w/0e    7w/0e   1w/0e    106w/0e
2.6.7-mm1         0w/0e     5w/0e   108w/0e    5w/0e   1w/0e    104w/0e
2.6.7-rc3-mm2     0w/0e     5w/0e   105w/10e   5w/0e   2w/0e    100w/2e
2.6.7-rc3-mm1     0w/0e     5w/0e   104w/10e   5w/0e   2w/0e    100w/2e
2.6.7-rc2-mm2     0w/0e     5w/0e   109w/10e   5w/0e   2w/0e    105w/2e
2.6.7-rc2-mm1     0w/0e    12w/0e   158w/13e   5w/0e   3w/0e    153w/4e
2.6.7-rc1-mm1     0w/0e     6w/0e   108w/0e    5w/0e   2w/0e    104w/0e
2.6.6-mm5         0w/0e     0w/0e   109w/5e    5w/0e   2w/0e    110w/0e
2.6.6-mm4         0w/0e     0w/0e   112w/9e    5w/0e   2w/5e    106w/1e
2.6.6-mm3         3w/9e     0w/0e   120w/26e   5w/0e   2w/0e    114w/10e
2.6.6-mm2         4w/11e    0w/0e   120w/24e   6w/0e   2w/0e    118w/9e
2.6.6-mm1         1w/0e     0w/0e   118w/25e   6w/0e   2w/0e    114w/10e
2.6.6-rc3-mm2     0w/0e     0w/0e   117w/ 0e   8w/0e   2w/0e    116w/0e
2.6.6-rc3-mm1     0w/0e     0w/0e   120w/10e   8w/0e   2w/0e    152w/2e
2.6.6-rc2-mm2     0w/0e     1w/5e   118w/ 0e   8w/0e   3w/0e    118w/0e
2.6.6-rc2-mm1     0w/0e     0w/0e   115w/ 0e   7w/0e   3w/0e    116w/0e
2.6.6-rc1-mm1     0w/0e     0w/7e   122w/ 0e   7w/0e   4w/0e    122w/0e
2.6.5-mm6         0w/0e     0w/0e   123w/ 0e   7w/0e   4w/0e    124w/0e
2.6.5-mm5         0w/0e     0w/0e   119w/ 0e   7w/0e   4w/0e    120w/0e
2.6.5-mm4         0w/0e     0w/0e   120w/ 0e   7w/0e   4w/0e    121w/0e
2.6.5-mm3         0w/0e     1w/0e   121w/12e   7w/0e   3w/0e    123w/0e
2.6.5-mm2         0w/0e     0w/0e   128w/12e   7w/0e   3w/0e    134w/0e
2.6.5-mm1         0w/0e     5w/0e   122w/ 0e   7w/0e   3w/0e    124w/0e
2.6.5-rc3-mm4     0w/0e     0w/0e   124w/ 0e   8w/0e   4w/0e    126w/0e
2.6.5-rc3-mm3     0w/0e     5w/0e   129w/14e   8w/0e   4w/0e    129w/6e
2.6.5-rc3-mm2     0w/0e     5w/0e   130w/14e   8w/0e   4w/0e    129w/6e
2.6.5-rc3-mm1     0w/0e     5w/0e   129w/ 0e   8w/0e   4w/0e    129w/0e
2.6.5-rc2-mm5     0w/0e     5w/0e   130w/ 0e   8w/0e   4w/0e    129w/0e
2.6.5-rc2-mm4     0w/0e     5w/0e   134w/ 0e   8w/0e   3w/0e    133w/0e
2.6.5-rc2-mm3     0w/0e     5w/0e   134w/ 0e   8w/0e   3w/0e    133w/0e
2.6.5-rc2-mm2     0w/0e     5w/0e   137w/ 0e   8w/0e   3w/0e    134w/0e
2.6.5-rc2-mm1     0w/0e     5w/0e   136w/ 0e   8w/0e   3w/0e    134w/0e
2.6.5-rc1-mm2     0w/0e     5w/0e   135w/ 5e   8w/0e   3w/0e    133w/0e
2.6.5-rc1-mm1     0w/0e     5w/0e   135w/ 5e   8w/0e   3w/0e    133w/0e
2.6.4-mm2         1w/2e     5w/2e   144w/10e   8w/0e   3w/2e    144w/0e
2.6.4-mm1         1w/0e     5w/0e   146w/ 5e   8w/0e   3w/0e    144w/0e
2.6.4-rc2-mm1     1w/0e     5w/0e   146w/12e  11w/0e   3w/0e    147w/2e
2.6.4-rc1-mm2     1w/0e     5w/0e   144w/ 0e  11w/0e   3w/0e    145w/0e
2.6.4-rc1-mm1     1w/0e     5w/0e   147w/ 5e  11w/0e   3w/0e    147w/0e
2.6.3-mm4         1w/0e     5w/0e   146w/ 0e   7w/0e   3w/0e    142w/0e
2.6.3-mm3         1w/2e     5w/2e   146w/15e   7w/0e   3w/2e    144w/5e
2.6.3-mm2         1w/8e     5w/0e   140w/ 0e   7w/0e   3w/0e    138w/0e
2.6.3-mm1         1w/0e     5w/0e   143w/ 5e   7w/0e   3w/0e    141w/0e
2.6.3-rc3-mm1     1w/0e     0w/0e   144w/13e   7w/0e   3w/0e    142w/3e
2.6.3-rc2-mm1     1w/0e     0w/265e 144w/ 5e   7w/0e   3w/0e    145w/0e
2.6.3-rc1-mm1     1w/0e     0w/265e 141w/ 5e   7w/0e   3w/0e    143w/0e
2.6.2-mm1         2w/0e     0w/264e 147w/ 5e   7w/0e   3w/0e    173w/0e
2.6.2-rc3-mm1     2w/0e     0w/265e 146w/ 5e   7w/0e   3w/0e    172w/0e
2.6.2-rc2-mm2     0w/0e     0w/264e 145w/ 5e   7w/0e   3w/0e    171w/0e
2.6.2-rc2-mm1     0w/0e     0w/264e 146w/ 5e   7w/0e   3w/0e    172w/0e
2.6.2-rc1-mm3     0w/0e     0w/265e 144w/ 8e   7w/0e   3w/0e    169w/0e
2.6.2-rc1-mm2     0w/0e     0w/264e 144w/ 5e  10w/0e   3w/0e    171w/0e
2.6.2-rc1-mm1     0w/0e     0w/264e 144w/ 5e  10w/0e   3w/0e    171w/0e
2.6.1-mm5         2w/5e     0w/264e 153w/11e  10w/0e   3w/0e    180w/0e
2.6.1-mm4         0w/821e   0w/264e 154w/ 5e   8w/1e   5w/0e    179w/0e
2.6.1-mm3         0w/0e     0w/0e   151w/ 5e  10w/0e   3w/0e    177w/0e
2.6.1-mm2         0w/0e     0w/0e   143w/ 5e  12w/0e   3w/0e    171w/0e
2.6.1-mm1         0w/0e     0w/0e   146w/ 9e  12w/0e   6w/0e    171w/0e
2.6.1-rc2-mm1     0w/0e     0w/0e   149w/ 0e  12w/0e   6w/0e    171w/4e
2.6.1-rc1-mm2     0w/0e     0w/0e   157w/15e  12w/0e   3w/0e    185w/4e
2.6.1-rc1-mm1     0w/0e     0w/0e   156w/10e  12w/0e   3w/0e    184w/2e
2.6.0-mm2         0w/0e     0w/0e   161w/ 0e  12w/0e   3w/0e    189w/0e
2.6.0-mm1         0w/0e     0w/0e   173w/ 0e  12w/0e   3w/0e    212w/0e

Web page with links to complete details:
   http://developer.osdl.org/cherry/compile/

John




^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02  8:55 2.6.8-rc2-mm2 Andrew Morton
                   ` (7 preceding siblings ...)
  2004-08-02 17:59 ` 2.6.8-rc2-mm2 (compile stats) John Cherry
@ 2004-08-02 18:15 ` Peter Osterlund
  2004-08-02 22:16 ` [patch] 2.6.8-rc2-mm2: compile error with SWAP=n Adrian Bunk
                   ` (5 subsequent siblings)
  14 siblings, 0 replies; 55+ messages in thread
From: Peter Osterlund @ 2004-08-02 18:15 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel

Andrew Morton <akpm@osdl.org> writes:

> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc2/2.6.8-rc2-mm2/
> 
> Changes since 2.6.8-rc2-mm1:
> 
> +packet-door-unlock.patch
> +pkt_lock_door-warning-fix.patch

The door-unlock patch got mis-merged, which caused the need for the
warning fix patch.  pkt_lock_door should be called from
pkt_release_dev, not from pkt_generic_packet.  This patch fixes it.

Signed-off-by: Peter Osterlund <petero2@telia.com>


--- linux/drivers/block/pktcdvd.c	2004-08-02 19:53:53.465566752 +0200
+++ ../cdr/linux/drivers/block/pktcdvd.c	2004-08-02 20:03:10.960162040 +0200
@@ -72,7 +72,6 @@ static struct proc_dir_entry *pkt_proc;
 static int pkt_major;
 static struct semaphore ctl_mutex;	/* Serialize open/close/setup/teardown */
 
-static int pkt_lock_door(struct pktcdvd_device *pd, int lockflag);
 
 static struct pktcdvd_device *pkt_find_dev(request_queue_t *q)
 {
@@ -304,8 +303,6 @@ static int pkt_generic_packet(struct pkt
 	DECLARE_COMPLETION(wait);
 	int err = 0;
 
-	pkt_lock_door(pd, 0);
-
 	q = bdev_get_queue(pd->bdev);
 
 	rq = blk_get_request(q, (cgc->data_direction == CGC_DATA_WRITE) ? WRITE : READ,
@@ -1956,6 +1953,8 @@ static void pkt_release_dev(struct pktcd
 	if (flush && pkt_flush_cache(pd))
 		DPRINTK("pktcdvd: %s not flushing cache\n", pd->name);
 
+	pkt_lock_door(pd, 0);
+
 	q = bdev_get_queue(pd->bdev);
 	pkt_set_speed(pd, MAX_SPEED, MAX_SPEED);
 	spin_lock_irq(q->queue_lock);

-- 
Peter Osterlund - petero2@telia.com
http://w1.894.telia.com/~u89404340

^ permalink raw reply	[flat|nested] 55+ messages in thread

* [patch] 2.6.8-rc2-mm2: compile error with SWAP=n
  2004-08-02  8:55 2.6.8-rc2-mm2 Andrew Morton
                   ` (8 preceding siblings ...)
  2004-08-02 18:15 ` 2.6.8-rc2-mm2 Peter Osterlund
@ 2004-08-02 22:16 ` Adrian Bunk
  2004-08-03  8:27 ` 2.6.8-rc2-mm2 Mark Watts
                   ` (4 subsequent siblings)
  14 siblings, 0 replies; 55+ messages in thread
From: Adrian Bunk @ 2004-08-02 22:16 UTC (permalink / raw)
  To: Andrew Morton, Rik van Riel; +Cc: linux-kernel

On Mon, Aug 02, 2004 at 01:55:27AM -0700, Andrew Morton wrote:
>...
> - Added Rik's token-based load control patch.  The VM currently has pretty
>   bad performance problems under heavy swapping loads and this patch speeds up
>   simple tests most impressively.  People who care about these things: please
>   test and measure.
>...
> Changes since 2.6.8-rc2-mm1:
>...
> +token-based-thrashing-control.patch
>...
>  VM load control.
>...

This breaks compilation with CONFIG_SWAP=n:

<--  snip  -->

...
  CC      kernel/fork.o
kernel/fork.c: In function `mmput':
kernel/fork.c:471: warning: implicit declaration of function `put_swap_token'
...
  CC      mm/filemap.o
mm/filemap.c: In function `filemap_nopage':
mm/filemap.c:1250: warning: implicit declaration of function `grab_swap_token'
...
  CC      mm/memory.o
mm/memory.c: In function `do_swap_page':
mm/memory.c:1375: warning: implicit declaration of function `grab_swap_token'
...
  CC      mm/rmap.o
mm/rmap.c: In function `page_referenced_one':
mm/rmap.c:233: warning: implicit declaration of function `has_swap_token'
...
  LD      .tmp_vmlinux1
kernel/built-in.o(.text+0x1ccf): In function `mmput':
: undefined reference to `put_swap_token'
mm/built-in.o(.text+0x1542): In function `filemap_nopage':
: undefined reference to `grab_swap_token'
mm/built-in.o(.text+0x131c9): In function `page_referenced_one':
: undefined reference to `has_swap_token'
make: *** [.tmp_vmlinux1] Error 1

<--  snip  -->


The bug is obvious:


#ifdef CONFIG_SWAP
...
#ifdef CONFIG_SWAP
...
#else
...
#endif
...
#else
...
#endif


Additional, the dummy grab_swap_token and has_swap_token weren't 
correct.


diffstat output:
 include/linux/swap.h |   43 +++++++++++++++++++++----------------------
 1 files changed, 21 insertions(+), 22 deletions(-)


Signed-off-by: Adrian Bunk <bunk@fs.tum.de>

--- linux-2.6.8-rc2-mm2-full/include/linux/swap.h.old	2004-08-02 23:16:52.000000000 +0200
+++ linux-2.6.8-rc2-mm2-full/include/linux/swap.h	2004-08-02 23:21:32.000000000 +0200
@@ -204,28 +204,6 @@
 extern struct page * lookup_swap_cache(swp_entry_t);
 extern struct page * read_swap_cache_async(swp_entry_t, struct vm_area_struct *vma,
 					   unsigned long addr);
-/* linux/mm/thrash.c */
-#ifdef CONFIG_SWAP
-extern struct mm_struct * swap_token_mm;
-extern void grab_swap_token(void);
-extern void __put_swap_token(struct mm_struct *);
-
-static inline int has_swap_token(struct mm_struct *mm)
-{
-	return (mm == swap_token_mm);
-}
-
-static inline void put_swap_token(struct mm_struct *mm)
-{
-	if (has_swap_token(mm))
-		__put_swap_token(mm);
-}
-#else /* CONFIG_SWAP */
-#define put_swap_token(x) do { } while(0)
-#define grab_swap_token  do { } while(0)
-#define has_swap_token 0
-#endif /* CONFIG_SWAP */
-
 /* linux/mm/swapfile.c */
 extern long total_swap_pages;
 extern unsigned int nr_swapfiles;
@@ -250,6 +228,22 @@
 #define swap_device_lock(p)	spin_lock(&p->sdev_lock)
 #define swap_device_unlock(p)	spin_unlock(&p->sdev_lock)
 
+/* linux/mm/thrash.c */
+extern struct mm_struct * swap_token_mm;
+extern void grab_swap_token(void);
+extern void __put_swap_token(struct mm_struct *);
+
+static inline int has_swap_token(struct mm_struct *mm)
+{
+	return (mm == swap_token_mm);
+}
+
+static inline void put_swap_token(struct mm_struct *mm)
+{
+	if (has_swap_token(mm))
+		__put_swap_token(mm);
+}
+
 #else /* CONFIG_SWAP */
 
 #define total_swap_pages			0
@@ -287,6 +281,11 @@
 	return entry;
 }
 
+/* linux/mm/thrash.c */
+#define put_swap_token(x) do { } while(0)
+#define grab_swap_token()  do { } while(0)
+#define has_swap_token(x) 0
+
 #endif /* CONFIG_SWAP */
 #endif /* __KERNEL__*/
 #endif /* _LINUX_SWAP_H */


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02 13:07 ` 2.6.8-rc2-mm2 Con Kolivas
@ 2004-08-03  6:43   ` Nick Piggin
  2004-08-03  7:35     ` 2.6.8-rc2-mm2 Con Kolivas
  0 siblings, 1 reply; 55+ messages in thread
From: Nick Piggin @ 2004-08-03  6:43 UTC (permalink / raw)
  To: Con Kolivas; +Cc: Andrew Morton, linux-kernel

Con Kolivas wrote:
> Andrew Morton wrote:

> Anyone with feedback on this please cc me. This was developed separately 
> from the -mm series which has heaps of other scheduler patches which 
> were not trivial to merge with so there may be teething problems. Good 
> reports dont hurt either ;)
> 

I can't get onto the OSDL site now, but I seem to remember staircase
having some performance problems on a few things. Hackbench and reaim
from memory... are these fixed? was I dreaming?


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02 15:31 ` 2.6.8-rc2-mm2 Mark Watts
  2004-08-02 15:33   ` 2.6.8-rc2-mm2 Jesper Juhl
  2004-08-02 15:38   ` 2.6.8-rc2-mm2 Dominik Karall
@ 2004-08-03  6:55   ` Clemens Schwaighofer
  2 siblings, 0 replies; 55+ messages in thread
From: Clemens Schwaighofer @ 2004-08-03  6:55 UTC (permalink / raw)
  To: Mark Watts, Linux Kernel ML

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Mark Watts wrote:
|
| Noting the large wad of x86-64 stuff in here, I'm going to give it a
whirl.
| Stupid question though - do I apply this to 2.6.8rc2 or does it bring
2.6.7
| up to rc2-mm2 ?

1) you have to apply rc2 first
2) please _DO_ _NOT_ *NEVER* *EVER* make a full quote of mails. in this
case you just sent ~49KB (-2KB from your mail) to perhaps 10.000
subscribers worldwide. just make a samll multiplication and think of
saving bandwith in the future. Thank you very much.

- --
Clemens Schwaighofer - IT Engineer & System Administration
==========================================================
TEQUILA\Japan, 6-17-2 Ginza Chuo-ku, Tokyo 104-8167, JAPAN
Tel: +81-(0)3-3545-7703            Fax: +81-(0)3-3545-7343
http://www.tequila.co.jp
==========================================================
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFBDzbFjBz/yQjBxz8RAgQKAJ9h6a1KnPRalqquOK/crt9gQpL9JgCcCLCC
ckcMIW6UpTO3LdyPhP9CGoA=
=aHov
-----END PGP SIGNATURE-----

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-03  6:43   ` 2.6.8-rc2-mm2 Nick Piggin
@ 2004-08-03  7:35     ` Con Kolivas
  2004-08-03  7:43       ` 2.6.8-rc2-mm2 Nick Piggin
  2004-08-03  7:45       ` 2.6.8-rc2-mm2 Con Kolivas
  0 siblings, 2 replies; 55+ messages in thread
From: Con Kolivas @ 2004-08-03  7:35 UTC (permalink / raw)
  To: Nick Piggin; +Cc: Andrew Morton, linux-kernel

Nick Piggin writes:

> Con Kolivas wrote:
>> Andrew Morton wrote:
> 
>> Anyone with feedback on this please cc me. This was developed separately 
>> from the -mm series which has heaps of other scheduler patches which 
>> were not trivial to merge with so there may be teething problems. Good 
>> reports dont hurt either ;)
>> 
> 
> I can't get onto the OSDL site now, but I seem to remember staircase
> having some performance problems on a few things. Hackbench and reaim
> from memory... are these fixed? was I dreaming?

Definitely dreaming I'm afraid :D

The performance on both reaim and hackbench has always equalled or exceeded 
mainline so thanks for bringing it up.

Con


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-03  7:35     ` 2.6.8-rc2-mm2 Con Kolivas
@ 2004-08-03  7:43       ` Nick Piggin
  2004-08-03  7:45       ` 2.6.8-rc2-mm2 Con Kolivas
  1 sibling, 0 replies; 55+ messages in thread
From: Nick Piggin @ 2004-08-03  7:43 UTC (permalink / raw)
  To: Con Kolivas; +Cc: Andrew Morton, linux-kernel

Con Kolivas wrote:
> Nick Piggin writes:
> 
>> Con Kolivas wrote:
>>
>>> Andrew Morton wrote:
>>
>>
>>> Anyone with feedback on this please cc me. This was developed 
>>> separately from the -mm series which has heaps of other scheduler 
>>> patches which were not trivial to merge with so there may be teething 
>>> problems. Good reports dont hurt either ;)
>>>
>>
>> I can't get onto the OSDL site now, but I seem to remember staircase
>> having some performance problems on a few things. Hackbench and reaim
>> from memory... are these fixed? was I dreaming?
> 
> 
> Definitely dreaming I'm afraid :D
> 
> The performance on both reaim and hackbench has always equalled or 
> exceeded mainline so thanks for bringing it up.
> 

Oh OK. Weird :). I'll run a few tests when OSDL comes back up anyway.

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-03  7:35     ` 2.6.8-rc2-mm2 Con Kolivas
  2004-08-03  7:43       ` 2.6.8-rc2-mm2 Nick Piggin
@ 2004-08-03  7:45       ` Con Kolivas
  2004-08-04  8:35         ` 2.6.8-rc2-mm2 Nick Piggin
  1 sibling, 1 reply; 55+ messages in thread
From: Con Kolivas @ 2004-08-03  7:45 UTC (permalink / raw)
  To: Con Kolivas; +Cc: Nick Piggin, Andrew Morton, linux-kernel

Con Kolivas writes:

> Nick Piggin writes:
> 
>> Con Kolivas wrote:
>>> Andrew Morton wrote:
>> 
>>> Anyone with feedback on this please cc me. This was developed separately 
>>> from the -mm series which has heaps of other scheduler patches which 
>>> were not trivial to merge with so there may be teething problems. Good 
>>> reports dont hurt either ;)
>>> 
>> 
>> I can't get onto the OSDL site now, but I seem to remember staircase
>> having some performance problems on a few things. Hackbench and reaim
>> from memory... are these fixed? was I dreaming?
> 
> Definitely dreaming I'm afraid :D
> 
> The performance on both reaim and hackbench has always equalled or exceeded 
> mainline so thanks for bringing it up.

Funny I just happen to have a few stored results which the urls do work for. 
Reaim normally on 8x with the default options gets about 7500-7700 jobs per 
minute. 

Here are the links for 2.6.8-rc2-mm2 with default setting:
Peak load Test: Maximum Jobs per Minute 
8248.40 (average of 3 runs) 
Quick Convergence Test: Maximum Jobs per 
Minute 7723.62 (average of 3 runs) 
http://khack.osdl.org/stp/295657/ 

in non interactive mode: 
Peak load Test: Maximum Jobs per Minute 
8379.02 (average of 3 runs) 
Quick Convergence Test: Maximum Jobs per 
Minute 7922.50 (average of 3 runs) 
http://khack.osdl.org/stp/295658/

and in compute mode:
Peak load Test: Maximum Jobs per Minute 8590.94 (average of 3 runs) 
Quick Convergence Test: Maximum Jobs per Minute 8294.81 (average of 3 runs)
http://khack.osdl.org/stp/295659/

Con


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02  8:55 2.6.8-rc2-mm2 Andrew Morton
                   ` (9 preceding siblings ...)
  2004-08-02 22:16 ` [patch] 2.6.8-rc2-mm2: compile error with SWAP=n Adrian Bunk
@ 2004-08-03  8:27 ` Mark Watts
  2004-08-03 13:05   ` 2.6.8-rc2-mm2 R. J. Wysocki
  2004-08-03 13:13 ` 2.6.8-rc2-mm2 Con Kolivas
                   ` (3 subsequent siblings)
  14 siblings, 1 reply; 55+ messages in thread
From: Mark Watts @ 2004-08-03  8:27 UTC (permalink / raw)
  To: linux-kernel; +Cc: Andrew Morton

[-- Attachment #1: Type: Text/Plain, Size: 830 bytes --]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


Something bad might have slipped in to do with dual opterons.

Whenever I boot, I get a kernel panic right after it brings up the processors.

console=ttyS0 only lets me see
'Kernel unable to handle ...'  with the rest cut off.

If I boot normally, there's a couple of oops' or panics on the screen but the 
roll by to fast to see.

.config is attched and its the same config that boots 2.6.8rc2 just fine.

Mark.

- -- 
Mark Watts
Senior Systems Engineer
QinetiQ Trusted Information Management
Trusted Solutions and Services group
GPG Public Key ID: 455420ED

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFBD0xmBn4EFUVUIO0RAr19AJ4jrPYmN84UESOthxVggHiulIC3egCgg3OI
cFlbZnuHPlEKwzfJs/eyHcE=
=ne1g
-----END PGP SIGNATURE-----

[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 43723 bytes --]

#
# Automatically generated make config: don't edit
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_HPET_TIMER=y
# CONFIG_HPET_EMULATE_RTC is not set
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_PAGG is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Processor type and features
#
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_PREEMPT is not set
# CONFIG_SCHED_SMT is not set
CONFIG_K8_NUMA=y
CONFIG_DISCONTIGMEM=y
CONFIG_NUMA=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_NR_CPUS=8
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y

#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set

#
# Power management options
#
CONFIG_PM=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_PROC_INTF=m
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
# CONFIG_CPU_FREQ_24_API is not set
CONFIG_CPU_FREQ_TABLE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_UID16=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set

#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_PARTITIONS=m
CONFIG_MTD_CONCAT=m
CONFIG_MTD_REDBOOT_PARTS=m
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
# CONFIG_NFTL_RW is not set
CONFIG_INFTL=m

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_AMDSTD_RETRY=0
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BUSWIDTH=2
CONFIG_MTD_PNC2000=m
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
# CONFIG_MTD_SCx200_DOCFLASH is not set
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_DILNETPC=m
CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
# CONFIG_MTD_L440GX is not set

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_SLRAM=m
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLKMTD=m

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y

#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_DISKONCHIP is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_OTHER=y
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32000
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y
# CONFIG_CDROM_PKTCDVD is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_IDE_TASK_IOCTL=y
# CONFIG_IDE_TASKFILE_IO is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_TRIFLEX=m
# CONFIG_BLK_DEV_CY82C693 is not set
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_HPT34X=y
CONFIG_HPT34X_AUTODMA=y
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8212 is not set
# CONFIG_BLK_DEV_NS87415 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=y
# CONFIG_PDC202XX_BURST is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_PDC202XX_FORCE=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m

#
# SCSI low-level drivers
#
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_3W_9XXX is not set
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_MEGARAID=m
CONFIG_SCSI_SATA=y
CONFIG_SCSI_SATA_SVW=m
CONFIG_SCSI_ATA_PIIX=m
# CONFIG_SCSI_SATA_NV is not set
CONFIG_SCSI_SATA_PROMISE=m
# CONFIG_SCSI_SATA_SX4 is not set
CONFIG_SCSI_SATA_SIL=m
# CONFIG_SCSI_SATA_SIS is not set
CONFIG_SCSI_SATA_VIA=m
# CONFIG_SCSI_SATA_VITESSE is not set
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_EATA_PIO=m
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
CONFIG_SCSI_QLOGIC_ISP=m
CONFIG_SCSI_QLOGIC_FC=m
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA2XXX=m
CONFIG_SCSI_QLA21XX=m
CONFIG_SCSI_QLA22XX=m
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
CONFIG_SCSI_QLA6312=m
CONFIG_SCSI_QLA6322=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_DEBUG=m

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y

#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m

#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set

#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
# CONFIG_IP6_NF_RAW is not set

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
# CONFIG_DECNET_SIOCGIFCONF is not set
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
# CONFIG_NET_DIVERT is not set
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HIDP is not set

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_BCSP_TXCRC=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_ETHERTAP=m

#
# ARCnet devices
#
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_HP100=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_AMD8111_ETH is not set
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
CONFIG_B44=m
CONFIG_FORCEDETH=m
CONFIG_DGRS=m
CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set
CONFIG_E100=m
# CONFIG_E100_NAPI is not set
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_VIA_VELOCITY is not set

#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
CONFIG_SK98LIN=m
CONFIG_TIGON3=m

#
# Ethernet (10000 Mbit)
#
CONFIG_IXGB=m
# CONFIG_IXGB_NAPI is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m

#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
CONFIG_NET_WIRELESS=y

#
# Wan interfaces
#
CONFIG_WAN=y
# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=y
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300=m
# CONFIG_PC300_MLPPP is not set
CONFIG_FARSYNC=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=y
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
# CONFIG_LAPBETHER is not set
# CONFIG_X25_ASY is not set
CONFIG_SBNI=m
CONFIG_SBNI_MULTILINE=y

#
# ATM drivers
#
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
# CONFIG_ATM_AMBASSADOR is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=m
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_SHAPER=m
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
CONFIG_GAMEPORT=m
CONFIG_SOUND_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_VORTEX=m
CONFIG_GAMEPORT_FM801=m
CONFIG_GAMEPORT_CS461x=m
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
# CONFIG_SERIO_RAW is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDDLER=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
# CONFIG_CYCLADES is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_N_HDLC=m
CONFIG_STALDRV=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_TIPAR=m
CONFIG_QIC02_TAPE=m
CONFIG_QIC02_DYNCONF=y

#
# Setting runtime QIC-02 configuration is done with qic02conf
#

#
# from the tpqic02-support package.  It is available at
#

#
# metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/
#

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_WAFER_WDT=m
CONFIG_I8XX_TCO=m
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_60XX_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_MACHZ_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL_MCH is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
# CONFIG_DRM_SIS is not set
CONFIG_MWAVE=m
CONFIG_RAW_DRIVER=m
# CONFIG_HPET is not set
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=m

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m

#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
CONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=m
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83627HF is not set

#
# Other I2C Chip support
#
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set

#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set

#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m

#
# Supported Frontend Modules
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_SP887X_FIRMWARE_FILE="/usr/lib/hotplug/firmware/sc_main.mc"
CONFIG_DVB_ALPS_TDLB7=m
CONFIG_DVB_ALPS_TDMB7=m
CONFIG_DVB_ATMEL_AT76C651=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_GRUNDIG_29504_491=m
CONFIG_DVB_GRUNDIG_29504_401=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1820=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_TDA1004X_FIRMWARE_FILE="/etc/dvb/tda1004x.bin"
# CONFIG_DVB_NXT6000 is not set

#
# Supported SAA7146 based PCI Adapters
#
CONFIG_DVB_AV7110=m
# CONFIG_DVB_AV7110_FIRMWARE is not set
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m

#
# Supported USB Adapters
#
CONFIG_DVB_TTUSB_BUDGET=m
# CONFIG_DVB_TTUSB_DEC is not set

#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_SKYSTAR=m

#
# Supported BT878 Adapters
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_BUF=m

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_BIT32_EMUL is not set
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_ALI5451=m
# CONFIG_SND_ATIIXP is not set
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS4281=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_HDSP=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_ALS4000=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X is not set
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
CONFIG_SND_SONICVIBES=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VX222=m

#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set

#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_BT878=m
CONFIG_SOUND_CMPCI=m
CONFIG_SOUND_CMPCI_FM=y
CONFIG_SOUND_CMPCI_MIDI=y
CONFIG_SOUND_CMPCI_JOYSTICK=y
CONFIG_SOUND_EMU10K1=m
# CONFIG_MIDI_EMU10K1 is not set
CONFIG_SOUND_FUSION=m
CONFIG_SOUND_CS4281=m
CONFIG_SOUND_ES1370=m
CONFIG_SOUND_ES1371=m
CONFIG_SOUND_ESSSOLO1=m
CONFIG_SOUND_MAESTRO=m
CONFIG_SOUND_MAESTRO3=m
CONFIG_SOUND_ICH=m
CONFIG_SOUND_SONICVIBES=m
CONFIG_SOUND_TRIDENT=m
CONFIG_SOUND_MSNDCLAS=m
CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
CONFIG_SOUND_MSNDPIN=m
CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin"
CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin"
CONFIG_SOUND_VIA82CXXX=m
# CONFIG_MIDI_VIA82CXXX is not set
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
CONFIG_SOUND_AD1816=m
CONFIG_SOUND_AD1889=m
CONFIG_SOUND_SGALAXY=m
CONFIG_SOUND_ADLIB=m
CONFIG_SOUND_ACI_MIXER=m
CONFIG_SOUND_CS4232=m
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_GUS=m
# CONFIG_SOUND_GUS16 is not set
CONFIG_SOUND_GUSMAX=y
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_NM256=m
CONFIG_SOUND_MAD16=m
# CONFIG_MAD16_OLDCARD is not set
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
# CONFIG_PSS_MIXER is not set
# CONFIG_PSS_HAVE_BOOT is not set
CONFIG_SOUND_SB=m
CONFIG_SOUND_AWE32_SYNTH=m
CONFIG_SOUND_WAVEFRONT=m
CONFIG_SOUND_MAUI=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_OPL3SA1=m
CONFIG_SOUND_OPL3SA2=m
CONFIG_SOUND_YMFPCI=m
CONFIG_SOUND_YMFPCI_LEGACY=y
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0x0
CONFIG_AEDSP16_MSS=y
# CONFIG_AEDSP16_SBPRO is not set
CONFIG_AEDSP16_MPU401=y
# CONFIG_SOUND_TVMIXER is not set
CONFIG_SOUND_KAHLUA=m
CONFIG_SOUND_ALI5455=m
CONFIG_SOUND_FORTE=m
CONFIG_SOUND_RME96XX=m
CONFIG_SOUND_AD1980=m

#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m

#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m

#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
CONFIG_USB_XPAD=m
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_HPUSBSCSI=m

#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=m
CONFIG_USB_VICAM=m
CONFIG_USB_DSBR=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_OV511=m
CONFIG_USB_PWC=m
CONFIG_USB_SE401=m
# CONFIG_USB_SN9C102 is not set
CONFIG_USB_STV680=m

#
# USB Network adaptors
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m

#
# USB Host-to-Host Cables
#
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_GENESYS=y
CONFIG_USB_NET1080=y
CONFIG_USB_PL2301=y

#
# Intelligent USB Devices/Gadgets
#
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_ZAURUS=y
CONFIG_USB_CDCETHER=y

#
# USB Network Adapters
#
CONFIG_USB_AX8817X=y

#
# USB port drivers
#
CONFIG_USB_USS720=m

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_TIGL=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_SPEEDTOUCH=m
# CONFIG_USB_PHIDGETSERVO is not set
CONFIG_USB_TEST=m

#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_SA1100 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m

#
# Firmware Drivers
#
# CONFIG_EDD is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS_FS=m
CONFIG_JFFS_FS_VERBOSE=0
# CONFIG_JFFS_PROC_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_NAND is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
# CONFIG_QNX4FS_RW is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_POSIX is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
# CONFIG_NCPFS_IOCTL_LOCKING is not set
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
CONFIG_RXRPC=m

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_EFI_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_INIT_DEBUG is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_FRAME_POINTER=y
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_KGDB is not set

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_AES_GENERIC is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_TEST=m

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-03  8:27 ` 2.6.8-rc2-mm2 Mark Watts
@ 2004-08-03 13:05   ` R. J. Wysocki
  0 siblings, 0 replies; 55+ messages in thread
From: R. J. Wysocki @ 2004-08-03 13:05 UTC (permalink / raw)
  To: Mark Watts, linux-kernel; +Cc: Andrew Morton

On Tuesday 03 of August 2004 10:27, Mark Watts wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
>
> Something bad might have slipped in to do with dual opterons.

I've run it successfully on a dual-Opteron system, so it's not related to dual 
Opterons in general.  Could you be more specific, please?

> Whenever I boot, I get a kernel panic right after it brings up the
> processors.
>
> console=ttyS0 only lets me see
> 'Kernel unable to handle ...'  with the rest cut off.
>
> If I boot normally, there's a couple of oops' or panics on the screen but
> the roll by to fast to see.
>
> .config is attched and its the same config that boots 2.6.8rc2 just fine.

Ah, I've set CONFIG_NR_CPUS=2.  The rest looks similarly.

Greets,
R.

-- 
Rafael J. Wysocki
[tel. (+48) 605 053 693]
----------------------------
For a successful technology, reality must take precedence over public 
relations, for nature cannot be fooled.
					-- Richard P. Feynman

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02  8:55 2.6.8-rc2-mm2 Andrew Morton
                   ` (10 preceding siblings ...)
  2004-08-03  8:27 ` 2.6.8-rc2-mm2 Mark Watts
@ 2004-08-03 13:13 ` Con Kolivas
  2004-08-03 19:44 ` 2.6.8-rc2-mm2 Adrian Bunk
                   ` (2 subsequent siblings)
  14 siblings, 0 replies; 55+ messages in thread
From: Con Kolivas @ 2004-08-03 13:13 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel, dominik.karall


[-- Attachment #1.1: Type: text/plain, Size: 394 bytes --]

Andrew Morton wrote:
> - Added Con's staircase CPU scheduler.

Somehow my sysctls ended in /proc/sys/fs/

Thanks dominik for noting you couldn't find them ;)

This patch puts them back in /proc/sys/kernel/ where I had intended them 
to be.

Signed-off-by: Con Kolivas <kernel@kolivas.org>

  sysctl.c |   32 ++++++++++++++++----------------
  1 files changed, 16 insertions(+), 16 deletions(-)

[-- Attachment #1.2: fix-staircase-proc --]
[-- Type: text/plain, Size: 1195 bytes --]

Index: linux-2.6.8-rc2-mm2/kernel/sysctl.c
===================================================================
--- linux-2.6.8-rc2-mm2.orig/kernel/sysctl.c	2004-08-03 01:29:29.000000000 +1000
+++ linux-2.6.8-rc2-mm2/kernel/sysctl.c	2004-08-03 23:01:42.572962387 +1000
@@ -636,6 +636,22 @@
 		.proc_handler   = &proc_unknown_nmi_panic,
 	},
 #endif
+	{
+		.ctl_name	= KERN_INTERACTIVE,
+		.procname	= "interactive",
+		.data		= &sched_interactive,
+		.maxlen		= sizeof (int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
+	},
+	{
+		.ctl_name	= KERN_COMPUTE,
+		.procname	= "compute",
+		.data		= &sched_compute,
+		.maxlen		= sizeof (int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
+	},
 	{ .ctl_name = 0 }
 };
 
@@ -927,22 +943,6 @@
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec,
 	},
-	{
-		.ctl_name	= KERN_INTERACTIVE,
-		.procname	= "interactive",
-		.data		= &sched_interactive,
-		.maxlen		= sizeof (int),
-		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
-	},
-	{
-		.ctl_name	= KERN_COMPUTE,
-		.procname	= "compute",
-		.data		= &sched_compute,
-		.maxlen		= sizeof (int),
-		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
-	},
 	{ .ctl_name = 0 }
 };
 

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 256 bytes --]

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02  8:55 2.6.8-rc2-mm2 Andrew Morton
                   ` (11 preceding siblings ...)
  2004-08-03 13:13 ` 2.6.8-rc2-mm2 Con Kolivas
@ 2004-08-03 19:44 ` Adrian Bunk
  2004-08-04 16:32 ` 2.6.8-rc2-mm2 Dominik Karall
  2004-08-05  4:38 ` [sparc32] [1/13] turbosparc flush warnings William Lee Irwin III
  14 siblings, 0 replies; 55+ messages in thread
From: Adrian Bunk @ 2004-08-03 19:44 UTC (permalink / raw)
  To: Andrew Morton, Andi Kleen; +Cc: linux-kernel

On Mon, Aug 02, 2004 at 01:55:27AM -0700, Andrew Morton wrote:
>...
> All 388 patches:
>...
> gcc35-always-inline.patch
>   gcc-3.5 fixes
>...
> gcc35-fixmap.h.patch
>   gcc-3.5 fixes
>...

Please drop these patches:

I can't see any way how they would fulfill Andi's claim that they would 
be required for gcc 3.5 .

All they do is to add an __always_inline which is _exactly_ the same as 
__inline__, __inline and inline .

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-03  7:45       ` 2.6.8-rc2-mm2 Con Kolivas
@ 2004-08-04  8:35         ` Nick Piggin
  2004-08-04 10:12           ` 2.6.8-rc2-mm2 Con Kolivas
  2004-08-04 10:31           ` 2.6.8-rc2-mm2 Ingo Molnar
  0 siblings, 2 replies; 55+ messages in thread
From: Nick Piggin @ 2004-08-04  8:35 UTC (permalink / raw)
  To: Con Kolivas; +Cc: Andrew Morton, linux-kernel

Con Kolivas wrote:
> Con Kolivas writes:
> 
>> Nick Piggin writes:
>>
>>> Con Kolivas wrote:
>>>
>>>> Andrew Morton wrote:
>>>
>>>
>>>> Anyone with feedback on this please cc me. This was developed 
>>>> separately from the -mm series which has heaps of other scheduler 
>>>> patches which were not trivial to merge with so there may be 
>>>> teething problems. Good reports dont hurt either ;)
>>>>
>>>
>>> I can't get onto the OSDL site now, but I seem to remember staircase
>>> having some performance problems on a few things. Hackbench and reaim
>>> from memory... are these fixed? was I dreaming?
>>
>>
>> Definitely dreaming I'm afraid :D
>>
>> The performance on both reaim and hackbench has always equalled or 
>> exceeded mainline so thanks for bringing it up.

(OSDL's search thingy still isn't working quite right, but I'll get back
to you about this when it does.)


Otherwise, a couple of problems I noticed:

You removed things like this:
-	/*
-	 * The idle thread is not allowed to schedule!
-	 * Remove this check after it has been exercised a bit.
-	 */
-	if (unlikely(current == rq->idle) && current->state != TASK_RUNNING) {
-		printk(KERN_ERR "bad: scheduling from the idle thread!\n");
-		dump_stack();
-	}
-
And child-runs-first in wake_up_new_task. Please don't.

Also, basic interactivity in X is bad with the interactive sysctl set to 0
(is X supposed to be at nice 0?), however fairness is bad when interactive is 1.
I'm not sure if this is an acceptable tradeoff - are you planning to fix it?

It has interactivity problems with "thud". Also the mouse can freeze for .5 to 1
second when moving between windows while there is disk IO going on in the background
(this is with interactive = 1). The test-starve problem is back.

Increasing priority (negative nice) doesn't have much impact. -20 CPU hog only gets
about double the CPU of a 0 priority CPU hog and only about 120% the CPU time of a
nice -10 hog.

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-04  8:35         ` 2.6.8-rc2-mm2 Nick Piggin
@ 2004-08-04 10:12           ` Con Kolivas
  2004-08-04 10:33             ` 2.6.8-rc2-mm2 Nick Piggin
  2004-08-04 10:31           ` 2.6.8-rc2-mm2 Ingo Molnar
  1 sibling, 1 reply; 55+ messages in thread
From: Con Kolivas @ 2004-08-04 10:12 UTC (permalink / raw)
  To: Nick Piggin; +Cc: Andrew Morton, linux-kernel

Nick Piggin writes:

> Con Kolivas wrote:
>> Con Kolivas writes:
>> 
>>> Nick Piggin writes:
>>>
>>>> Con Kolivas wrote:
>>>>
>>>>> Andrew Morton wrote:
>>>>
>>>>
>>>>> Anyone with feedback on this please cc me. This was developed 
>>>>> separately from the -mm series which has heaps of other scheduler 
>>>>> patches which were not trivial to merge with so there may be 
>>>>> teething problems. Good reports dont hurt either ;)
>>>>>
>>>>
>>>> I can't get onto the OSDL site now, but I seem to remember staircase
>>>> having some performance problems on a few things. Hackbench and reaim
>>>> from memory... are these fixed? was I dreaming?
>>>
>>>
>>> Definitely dreaming I'm afraid :D
>>>
>>> The performance on both reaim and hackbench has always equalled or 
>>> exceeded mainline so thanks for bringing it up.
> 
> (OSDL's search thingy still isn't working quite right, but I'll get back
> to you about this when it does.)
> 
> 
> Otherwise, a couple of problems I noticed:
> 
> You removed things like this:
> -	/*
> -	 * The idle thread is not allowed to schedule!
> -	 * Remove this check after it has been exercised a bit.
> -	 */
> -	if (unlikely(current == rq->idle) && current->state != TASK_RUNNING) {
> -		printk(KERN_ERR "bad: scheduling from the idle thread!\n");
> -		dump_stack();
> -	}
> -
> And child-runs-first in wake_up_new_task. Please don't.

It does child runs first by design in staircase. You don't need any more.

> Also, basic interactivity in X is bad with the interactive sysctl set to 0

Well duh... disable interactivity and interactivity is bad. What's the 
problem? It's not meant to be used on a desktop in that way. 

> (is X supposed to be at nice 0?), however fairness is bad when interactive is 1.
> I'm not sure if this is an acceptable tradeoff - are you planning to fix it?

Why? A single user desktop is hardly needing extremely accurate cpu 
distribution... we see that already in 2.6. 

> It has interactivity problems with "thud". Also the mouse can freeze for .5 to 1
> second when moving between windows while there is disk IO going on in the background
> (this is with interactive = 1). The test-starve problem is back.

Hmm? a minor mouse freeze with a _test_ starvation program is not 
starvation; nor is it an interactivity problem. Yours is the first complaint 
about interactivity during i/o.

> Increasing priority (negative nice) doesn't have much impact. -20 CPU hog only gets
> about double the CPU of a 0 priority CPU hog and only about 120% the CPU time of a
> nice -10 hog.

-20 is 40 rr intervals. 0 is 20 rr intervals. +19 is 1 rr interval. 
Seems to me the cpu distribution is working our absolutely perfectly as 
designed.

Why is the only critic of this the person with a competing design? Does 
anyone else object to these things? I certainly dont feel objective enough 
to criticise yours.

Con


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-04  8:35         ` 2.6.8-rc2-mm2 Nick Piggin
  2004-08-04 10:12           ` 2.6.8-rc2-mm2 Con Kolivas
@ 2004-08-04 10:31           ` Ingo Molnar
  2004-08-04 10:46             ` 2.6.8-rc2-mm2 Nick Piggin
  2004-08-04 10:47             ` 2.6.8-rc2-mm2 Con Kolivas
  1 sibling, 2 replies; 55+ messages in thread
From: Ingo Molnar @ 2004-08-04 10:31 UTC (permalink / raw)
  To: Nick Piggin; +Cc: Con Kolivas, Andrew Morton, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 1117 bytes --]


* Nick Piggin <nickpiggin@yahoo.com.au> wrote:

> Also, basic interactivity in X is bad with the interactive sysctl set
> to 0 (is X supposed to be at nice 0?), however fairness is bad when
> interactive is 1. I'm not sure if this is an acceptable tradeoff - are
> you planning to fix it?

it also has clear interactivity problems when just running lots of CPU
hogs even with the default interactive=1 compute=0 setting.

> Increasing priority (negative nice) doesn't have much impact. -20 CPU
> hog only gets about double the CPU of a 0 priority CPU hog and only
> about 120% the CPU time of a nice -10 hog.

this is a property of the base scheduler as well.

We can do a nonlinear timeslice distribution trivially - the attached
patch implements the following timeslice distribution ontop of
2.6.8-rc3:

   [ -20 ... 0 ... 19 ] => [800ms ... 100ms ... 5ms]

the patch also cleans up some other aspects of timeslice calculations -
with it applied nice +19 tasks will get 20 times less CPU time than
default tasks. Previously it was 1:10.

the nice-20/nice+19 ratio is now 1:160 - sufficient for all aspects.

	Ingo

[-- Attachment #2: sched-2.6.8-rc2-mm2-A2 --]
[-- Type: text/plain, Size: 3339 bytes --]

--- linux/kernel/sched.c.orig	
+++ linux/kernel/sched.c	
@@ -68,8 +68,6 @@
 #define USER_PRIO(p)		((p)-MAX_RT_PRIO)
 #define TASK_USER_PRIO(p)	USER_PRIO((p)->static_prio)
 #define MAX_USER_PRIO		(USER_PRIO(MAX_PRIO))
-#define AVG_TIMESLICE	(MIN_TIMESLICE + ((MAX_TIMESLICE - MIN_TIMESLICE) *\
-			(MAX_PRIO-1-NICE_TO_PRIO(0))/(MAX_USER_PRIO - 1)))
 
 /*
  * Some helpers for converting nanosecond timing to jiffy resolution
@@ -80,12 +78,12 @@
 /*
  * These are the 'tuning knobs' of the scheduler:
  *
- * Minimum timeslice is 10 msecs, default timeslice is 100 msecs,
- * maximum timeslice is 200 msecs. Timeslices get refilled after
- * they expire.
+ * Minimum timeslice is 5 msecs (or 1 jiffy, whichever is larger),
+ * default timeslice is 100 msecs, maximum timeslice is 800 msecs.
+ * Timeslices get refilled after they expire.
  */
-#define MIN_TIMESLICE		( 10 * HZ / 1000)
-#define MAX_TIMESLICE		(200 * HZ / 1000)
+#define MIN_TIMESLICE		max(5 * HZ / 1000, 1)
+#define DEF_TIMESLICE		(100 * HZ / 1000)
 #define ON_RUNQUEUE_WEIGHT	 30
 #define CHILD_PENALTY		 95
 #define PARENT_PENALTY		100
@@ -93,7 +91,7 @@
 #define PRIO_BONUS_RATIO	 25
 #define MAX_BONUS		(MAX_USER_PRIO * PRIO_BONUS_RATIO / 100)
 #define INTERACTIVE_DELTA	  2
-#define MAX_SLEEP_AVG		(AVG_TIMESLICE * MAX_BONUS)
+#define MAX_SLEEP_AVG		(DEF_TIMESLICE * MAX_BONUS)
 #define STARVATION_LIMIT	(MAX_SLEEP_AVG)
 #define NS_MAX_SLEEP_AVG	(JIFFIES_TO_NS(MAX_SLEEP_AVG))
 #define CREDIT_LIMIT		100
@@ -162,23 +160,23 @@
 	((p)->prio < (rq)->curr->prio)
 
 /*
- * BASE_TIMESLICE scales user-nice values [ -20 ... 19 ]
- * to time slice values.
+ * task_timeslice() scales user-nice values [ -20 ... 0 ... 19 ]
+ * to time slice values: [800ms ... 100ms ... 5ms]
  *
  * The higher a thread's priority, the bigger timeslices
  * it gets during one round of execution. But even the lowest
  * priority thread gets MIN_TIMESLICE worth of execution time.
- *
- * task_timeslice() is the interface that is used by the scheduler.
  */
 
-#define BASE_TIMESLICE(p) (MIN_TIMESLICE + \
-		((MAX_TIMESLICE - MIN_TIMESLICE) * \
-			(MAX_PRIO-1 - (p)->static_prio) / (MAX_USER_PRIO-1)))
+#define SCALE_PRIO(x, prio) \
+	max(x * (MAX_PRIO - prio) / (MAX_USER_PRIO/2), MIN_TIMESLICE)
 
 static unsigned int task_timeslice(task_t *p)
 {
-	return BASE_TIMESLICE(p);
+	if (p->static_prio < NICE_TO_PRIO(0))
+		return SCALE_PRIO(DEF_TIMESLICE*4, p->static_prio);
+	else
+		return SCALE_PRIO(DEF_TIMESLICE, p->static_prio);
 }
 
 #define task_hot(p, now, sd) ((now) - (p)->timestamp < (sd)->cache_hot_time)
@@ -400,7 +398,7 @@ static void recalc_task_prio(task_t *p, 
 		if (p->mm && p->activated != -1 &&
 			sleep_time > INTERACTIVE_SLEEP(p)) {
 				p->sleep_avg = JIFFIES_TO_NS(MAX_SLEEP_AVG -
-						AVG_TIMESLICE);
+						DEF_TIMESLICE);
 				if (!HIGH_CREDIT(p))
 					p->interactive_credit++;
 		} else {
@@ -1024,8 +1022,8 @@ void fastcall sched_exit(task_t * p)
 	rq = task_rq_lock(p->parent, &flags);
 	if (p->first_time_slice) {
 		p->parent->time_slice += p->time_slice;
-		if (unlikely(p->parent->time_slice > MAX_TIMESLICE))
-			p->parent->time_slice = MAX_TIMESLICE;
+		if (unlikely(p->parent->time_slice > task_timeslice(p)))
+			p->parent->time_slice = task_timeslice(p);
 	}
 	if (p->sleep_avg < p->parent->sleep_avg)
 		p->parent->sleep_avg = p->parent->sleep_avg /

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-04 10:12           ` 2.6.8-rc2-mm2 Con Kolivas
@ 2004-08-04 10:33             ` Nick Piggin
  2004-08-04 11:42               ` 2.6.8-rc2-mm2 bert hubert
  0 siblings, 1 reply; 55+ messages in thread
From: Nick Piggin @ 2004-08-04 10:33 UTC (permalink / raw)
  To: Con Kolivas; +Cc: Andrew Morton, linux-kernel

Con Kolivas wrote:
> Nick Piggin writes:

>> And child-runs-first in wake_up_new_task. Please don't.
> 
> 
> It does child runs first by design in staircase. You don't need any more.
> 

Oh ok. Well please don't remove the check anyway.

>> Also, basic interactivity in X is bad with the interactive sysctl set 
>> to 0
> 
> 
> Well duh... disable interactivity and interactivity is bad. What's the 
> problem? It's not meant to be used on a desktop in that way.
> 

Well why would you want to disable it then?

>> (is X supposed to be at nice 0?), however fairness is bad when 
>> interactive is 1.
>> I'm not sure if this is an acceptable tradeoff - are you planning to 
>> fix it?
> 
> 
> Why? A single user desktop is hardly needing extremely accurate cpu 
> distribution... we see that already in 2.6.
> 

No, I'm talking about one task getting *double* the amount of CPU as
another, when it should actually be getting a little bit less.

>> It has interactivity problems with "thud". Also the mouse can freeze 
>> for .5 to 1
>> second when moving between windows while there is disk IO going on in 
>> the background
>> (this is with interactive = 1). The test-starve problem is back.
> 
> 
> Hmm? a minor mouse freeze with a _test_ starvation program is not 
> starvation; nor is it an interactivity problem. Yours is the first 
> complaint about interactivity during i/o.

The mouse was often freezing for me when moving over windows with
IO running. That was an interactivity problem for me.

Thud itself isn't a problem I guess. Just thought you might like to know.

The test-starve problem actually is a problem though.

> 
>> Increasing priority (negative nice) doesn't have much impact. -20 CPU 
>> hog only gets
>> about double the CPU of a 0 priority CPU hog and only about 120% the 
>> CPU time of a
>> nice -10 hog.
> 
> 
> -20 is 40 rr intervals. 0 is 20 rr intervals. +19 is 1 rr interval. 
> Seems to me the cpu distribution is working our absolutely perfectly as 
> designed.
> 

Well maybe it should be re designed. If an admin wants a task to get a
decent amount of CPU, it is not reasonable to nice +19 everything else.

> Why is the only critic of this the person with a competing design? Does 
> anyone else object to these things? I certainly dont feel objective 
> enough to criticise yours.
> 

No need to get a bee in your bonet. I was pointing out some things that
you need to fix if you are serious about this. I'd rather not replace
the scheduler with a known broken one.

Oh, and I would very much like you to criticise mine :)

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-04 10:31           ` 2.6.8-rc2-mm2 Ingo Molnar
@ 2004-08-04 10:46             ` Nick Piggin
  2004-08-04 10:47             ` 2.6.8-rc2-mm2 Con Kolivas
  1 sibling, 0 replies; 55+ messages in thread
From: Nick Piggin @ 2004-08-04 10:46 UTC (permalink / raw)
  To: Ingo Molnar; +Cc: Con Kolivas, Andrew Morton, linux-kernel

Ingo Molnar wrote:
> * Nick Piggin <nickpiggin@yahoo.com.au> wrote:
> 
> 
>>Also, basic interactivity in X is bad with the interactive sysctl set
>>to 0 (is X supposed to be at nice 0?), however fairness is bad when
>>interactive is 1. I'm not sure if this is an acceptable tradeoff - are
>>you planning to fix it?
> 
> 
> it also has clear interactivity problems when just running lots of CPU
> hogs even with the default interactive=1 compute=0 setting.
> 
> 
>>Increasing priority (negative nice) doesn't have much impact. -20 CPU
>>hog only gets about double the CPU of a 0 priority CPU hog and only
>>about 120% the CPU time of a nice -10 hog.
> 
> 
> this is a property of the base scheduler as well.
> 

*blush*. Well I shouldn't have singled out the staircase scheduler
with this then.

I think I would prefer your nonlinear ratios better though.

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-04 10:31           ` 2.6.8-rc2-mm2 Ingo Molnar
  2004-08-04 10:46             ` 2.6.8-rc2-mm2 Nick Piggin
@ 2004-08-04 10:47             ` Con Kolivas
  2004-08-04 12:45               ` 2.6.8-rc2-mm2 Ingo Molnar
  1 sibling, 1 reply; 55+ messages in thread
From: Con Kolivas @ 2004-08-04 10:47 UTC (permalink / raw)
  To: Ingo Molnar; +Cc: Nick Piggin, Andrew Morton, linux-kernel

Ingo Molnar writes:

Thanks for replying.

> * Nick Piggin <nickpiggin@yahoo.com.au> wrote:
> 
>> Also, basic interactivity in X is bad with the interactive sysctl set
>> to 0 (is X supposed to be at nice 0?), however fairness is bad when
>> interactive is 1. I'm not sure if this is an acceptable tradeoff - are
>> you planning to fix it?
> 
> it also has clear interactivity problems when just running lots of CPU
> hogs even with the default interactive=1 compute=0 setting.

Can you define them please? I haven't had any reported to me.

Cheers,
Con


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-04 10:33             ` 2.6.8-rc2-mm2 Nick Piggin
@ 2004-08-04 11:42               ` bert hubert
  2004-08-05  1:21                 ` 2.6.8-rc2-mm2 Nick Piggin
  0 siblings, 1 reply; 55+ messages in thread
From: bert hubert @ 2004-08-04 11:42 UTC (permalink / raw)
  To: Nick Piggin; +Cc: Con Kolivas, Andrew Morton, linux-kernel

On Wed, Aug 04, 2004 at 08:33:44PM +1000, Nick Piggin wrote:

> >Well duh... disable interactivity and interactivity is bad. What's the 
> >problem? It's not meant to be used on a desktop in that way.
> 
> Well why would you want to disable it then?

When not on a desktop of course - most servers don't care about X
interactivity but do care a lot about 'nice', and would not want to grant a
process the CPU (unfairly) longer to satisfy the human need for snappy
responses.

-- 
http://www.PowerDNS.com      Open source, database driven DNS Software 
http://lartc.org           Linux Advanced Routing & Traffic Control HOWTO

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-04 10:47             ` 2.6.8-rc2-mm2 Con Kolivas
@ 2004-08-04 12:45               ` Ingo Molnar
  2004-08-05  2:53                 ` 2.6.8-rc2-mm2 Con Kolivas
  0 siblings, 1 reply; 55+ messages in thread
From: Ingo Molnar @ 2004-08-04 12:45 UTC (permalink / raw)
  To: Con Kolivas; +Cc: Nick Piggin, Andrew Morton, linux-kernel


* Con Kolivas <kernel@kolivas.org> wrote:

> Ingo Molnar writes:
> 
> Thanks for replying.
> 
> >* Nick Piggin <nickpiggin@yahoo.com.au> wrote:
> >
> >>Also, basic interactivity in X is bad with the interactive sysctl set
> >>to 0 (is X supposed to be at nice 0?), however fairness is bad when
> >>interactive is 1. I'm not sure if this is an acceptable tradeoff - are
> >>you planning to fix it?
> >
> >it also has clear interactivity problems when just running lots of CPU
> >hogs even with the default interactive=1 compute=0 setting.
> 
> Can you define them please? I haven't had any reported to me.

sure: take a process that uses 85% of CPU time (and sleeps 15% of the
time) if running on an idle system. Start just two of these hogs at
normal priority. 2.6.8-rc2-mm2 becomes almost instantly unusable even
over a text console: a single 'top' refresh takes ages, 'ls' displays
one line per second or so. Start more of these and the system
effectively locks up.

unapply staircase-cpu-scheduler-268-rc2-mm1.patch and the same workload
becomes usable.

	Ingo

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02  8:55 2.6.8-rc2-mm2 Andrew Morton
                   ` (12 preceding siblings ...)
  2004-08-03 19:44 ` 2.6.8-rc2-mm2 Adrian Bunk
@ 2004-08-04 16:32 ` Dominik Karall
  2004-08-05  4:38 ` [sparc32] [1/13] turbosparc flush warnings William Lee Irwin III
  14 siblings, 0 replies; 55+ messages in thread
From: Dominik Karall @ 2004-08-04 16:32 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 642 bytes --]

On Monday 02 August 2004 10:55, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc2/2.6
>.8-rc2-mm2/

the kernel does not boot on my machine. 2.6.8-rc2 and rc2-mm1 boot fine with 
the same .config.

...
Aug  4 17:59:04 mybox kernel: saa7134[0]/audio: audio carrier scan failed, 
using 5.500 MHz [default]
Aug  4 17:59:06 mybox kernel: usb 3-1: control timeout on ep0out
Aug  4 17:59:06 mybox kernel: ohci_hcd 0000:00:03.2: Unlink after no-IRQ?  
Different ACPI or APIC settings may help.


The saa7134 error also did not appear with 2.6.8-rc2-mm1.

syslog, lspci and .config attached.

thx,
dominik

[-- Attachment #2: syslog.txt --]
[-- Type: text/plain, Size: 24420 bytes --]

Aug  4 17:58:58 mybox syslogd 1.4.1#15: restart.
Aug  4 17:58:58 mybox kernel: klogd 1.4.1#15, log source = /proc/kmsg started.
Aug  4 17:58:58 mybox kernel: Inspecting /boot/System.map-2.6.8-rc2-mm2
Aug  4 17:58:58 mybox kernel: Loaded 24870 symbols from /boot/System.map-2.6.8-rc2-mm2.
Aug  4 17:58:58 mybox kernel: Symbols match kernel version 2.6.8.
Aug  4 17:58:58 mybox kernel: No module symbols loaded - kernel modules not enabled.
Aug  4 17:58:58 mybox kernel: Linux version 2.6.8-rc2-mm2 (root@mybox) (gcc-Version 3.4.1 (Debian 3.4.1-5)) #1 Mon Aug 2 17:36:30 CEST 2004
Aug  4 17:58:58 mybox kernel: BIOS-provided physical RAM map:
Aug  4 17:58:58 mybox kernel:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Aug  4 17:58:58 mybox kernel:  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Aug  4 17:58:58 mybox kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Aug  4 17:58:58 mybox kernel:  BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
Aug  4 17:58:58 mybox kernel:  BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
Aug  4 17:58:58 mybox kernel:  BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
Aug  4 17:58:58 mybox kernel:  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Aug  4 17:58:58 mybox kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Aug  4 17:58:58 mybox kernel:  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Aug  4 17:58:58 mybox kernel: 255MB LOWMEM available.
Aug  4 17:58:58 mybox kernel: On node 0 totalpages: 65520
Aug  4 17:58:58 mybox kernel:   DMA zone: 4096 pages, LIFO batch:1
Aug  4 17:58:58 mybox kernel:   Normal zone: 61424 pages, LIFO batch:14
Aug  4 17:58:58 mybox kernel:   HighMem zone: 0 pages, LIFO batch:1
Aug  4 17:58:58 mybox kernel: DMI 2.3 present.
Aug  4 17:58:58 mybox kernel: ACPI: RSDP (v000 AWARD                                     ) @ 0x000f72b0
Aug  4 17:58:58 mybox kernel: ACPI: RSDT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
Aug  4 17:58:58 mybox kernel: ACPI: FADT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
Aug  4 17:58:58 mybox kernel: ACPI: MADT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff69c0
Aug  4 17:58:58 mybox kernel: ACPI: DSDT (v001 AWARD  AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
Aug  4 17:58:58 mybox kernel: ACPI: PM-Timer IO Port: 0x1008
Aug  4 17:58:58 mybox kernel: Built 1 zonelists
Aug  4 17:58:58 mybox kernel: Initializing CPU#0
Aug  4 17:58:58 mybox kernel: Kernel command line: BOOT_IMAGE=2.6.8-rc2-mm2 ro root=30a hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi apm=power-off nomce
Aug  4 17:58:58 mybox kernel: ide_setup: hda=scsi
Aug  4 17:58:58 mybox kernel: ide_setup: hdb=scsi
Aug  4 17:58:58 mybox kernel: ide_setup: hdc=scsi
Aug  4 17:58:58 mybox kernel: ide_setup: hdd=scsi
Aug  4 17:58:58 mybox kernel: ide_setup: hde=scsi
Aug  4 17:58:58 mybox kernel: ide_setup: hdf=scsi
Aug  4 17:58:58 mybox kernel: ide_setup: hdg=scsi
Aug  4 17:58:58 mybox kernel: ide_setup: hdh=scsi
Aug  4 17:58:58 mybox kernel: CPU 0 irqstacks, hard=c03a1000 soft=c03a0000
Aug  4 17:58:58 mybox kernel: PID hash table entries: 1024 (order 10: 8192 bytes)
Aug  4 17:58:58 mybox kernel: Detected 2673.220 MHz processor.
Aug  4 17:58:58 mybox kernel: Using pmtmr for high-res timesource
Aug  4 17:58:58 mybox kernel: Console: colour dummy device 80x25
Aug  4 17:58:58 mybox kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Aug  4 17:58:58 mybox kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Aug  4 17:58:58 mybox kernel: Memory: 255996k/262080k available (1804k kernel code, 5336k reserved, 744k data, 112k init, 0k highmem)
Aug  4 17:58:58 mybox kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Aug  4 17:58:58 mybox kernel: Calibrating delay loop... 5292.03 BogoMIPS (lpj=2646016)
Aug  4 17:58:58 mybox kernel: Security Scaffold v1.0.0 initialized
Aug  4 17:58:58 mybox kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Aug  4 17:58:58 mybox kernel: CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
Aug  4 17:58:58 mybox kernel: CPU: After vendor identify, caps:  bfebfbff 00000000 00000000 00000000
Aug  4 17:58:58 mybox kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Aug  4 17:58:58 mybox kernel: CPU: L2 cache: 512K
Aug  4 17:58:58 mybox kernel: CPU: After all inits, caps:        bfebfbff 00000000 00000000 00000080
Aug  4 17:58:58 mybox kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
Aug  4 17:58:58 mybox kernel: Enabling fast FPU save and restore... done.
Aug  4 17:58:58 mybox kernel: Enabling unmasked SIMD FPU exception support... done.
Aug  4 17:58:58 mybox kernel: Checking 'hlt' instruction... OK.
Aug  4 17:58:58 mybox kernel: NET: Registered protocol family 16
Aug  4 17:58:58 mybox kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb400, last bus=1
Aug  4 17:58:58 mybox kernel: PCI: Using configuration type 1
Aug  4 17:58:58 mybox kernel: mtrr: v2.0 (20020519)
Aug  4 17:58:58 mybox kernel: ACPI: Subsystem revision 20040715
Aug  4 17:58:58 mybox kernel: ACPI: IRQ9 SCI: Level Trigger.
Aug  4 17:58:58 mybox kernel: ACPI: Interpreter enabled
Aug  4 17:58:58 mybox kernel: ACPI: Using PIC for interrupt routing
Aug  4 17:58:58 mybox kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Aug  4 17:58:58 mybox kernel: PCI: Probing PCI hardware (bus 00)
Aug  4 17:58:58 mybox kernel: Uncovering SIS963 that hid as a SIS503 (compatible=1)
Aug  4 17:58:58 mybox kernel: Enabling SiS 96x SMBus.
Aug  4 17:58:58 mybox kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Aug  4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Aug  4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Aug  4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Aug  4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
Aug  4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Aug  4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
Aug  4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *13
Aug  4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Aug  4 17:58:58 mybox kernel: PCI: Using ACPI for IRQ routing
Aug  4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
Aug  4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 9 (level, low) -> IRQ 9
Aug  4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 9 (level, low) -> IRQ 9
Aug  4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Aug  4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 11 (level, low) -> IRQ 11
Aug  4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
Aug  4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 5 (level, low) -> IRQ 5
Aug  4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
Aug  4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 9 (level, low) -> IRQ 9
Aug  4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 3
Aug  4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 3 (level, low) -> IRQ 3
Aug  4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
Aug  4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 10 (level, low) -> IRQ 10
Aug  4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
Aug  4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 11 (level, low) -> IRQ 11
Aug  4 17:58:58 mybox kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
Aug  4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 3 (level, low) -> IRQ 3
Aug  4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 5 (level, low) -> IRQ 5
Aug  4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 3 (level, low) -> IRQ 3
Aug  4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 9 (level, low) -> IRQ 9
Aug  4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
Aug  4 17:58:58 mybox kernel: vesafb: framebuffer at 0xd8000000, mapped to 0xd0880000, size 10240k
Aug  4 17:58:58 mybox kernel: vesafb: mode is 1280x1024x32, linelength=5120, pages=0
Aug  4 17:58:58 mybox kernel: vesafb: protected mode interface info at c000:e2d0
Aug  4 17:58:58 mybox kernel: vesafb: scrolling: redraw
Aug  4 17:58:58 mybox kernel: vesafb: directcolor: size=8:8:8:8, shift=24:16:8:0
Aug  4 17:58:58 mybox kernel: fb0: VESA VGA frame buffer device
Aug  4 17:58:58 mybox kernel: udf: registering filesystem
Aug  4 17:58:58 mybox kernel: Initializing Cryptographic API
Aug  4 17:58:58 mybox kernel: Console: switching to colour frame buffer device 160x64
Aug  4 17:58:58 mybox kernel: Linux agpgart interface v0.100 (c) Dave Jones
Aug  4 17:58:58 mybox kernel: agpgart: Detected SiS 648 chipset
Aug  4 17:58:58 mybox kernel: agpgart: Maximum main memory to use for agp memory: 203M
Aug  4 17:58:58 mybox kernel: agpgart: AGP aperture is 128M @ 0xd0000000
Aug  4 17:58:58 mybox kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Aug  4 17:58:58 mybox kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Aug  4 17:58:58 mybox kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
Aug  4 17:58:58 mybox kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug  4 17:58:58 mybox kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Aug  4 17:58:58 mybox kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Aug  4 17:58:58 mybox kernel: SIS5513: IDE controller at PCI slot 0000:00:02.5
Aug  4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 11 (level, low) -> IRQ 11
Aug  4 17:58:58 mybox kernel: SIS5513: chipset revision 0
Aug  4 17:58:58 mybox kernel: SIS5513: not 100%% native mode: will probe irqs later
Aug  4 17:58:58 mybox kernel: SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
Aug  4 17:58:58 mybox kernel:     ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
Aug  4 17:58:58 mybox kernel:     ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:pio
Aug  4 17:58:58 mybox kernel: hda: ST3120023A, ATA DISK drive
Aug  4 17:58:58 mybox kernel: hdb: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
Aug  4 17:58:58 mybox kernel: Using anticipatory io scheduler
Aug  4 17:58:58 mybox kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Aug  4 17:58:58 mybox kernel: hdc: SONY CD-RW CRX210E1, ATAPI CD/DVD-ROM drive
Aug  4 17:58:58 mybox kernel: ide1 at 0x170-0x177,0x376 on irq 15
Aug  4 17:58:58 mybox kernel: hda: max request size: 128KiB
Aug  4 17:58:58 mybox kernel: hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
Aug  4 17:58:58 mybox kernel: hda: cache flushes supported
Aug  4 17:58:58 mybox kernel:  hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
Aug  4 17:58:58 mybox kernel: ide-cd: passing drive hdb to ide-scsi emulation.
Aug  4 17:58:58 mybox kernel: ide-cd: passing drive hdc to ide-scsi emulation.
Aug  4 17:58:58 mybox kernel: ide-floppy driver 0.99.newide
Aug  4 17:58:58 mybox kernel: ide-cd: passing drive hdb to ide-scsi emulation.
Aug  4 17:58:58 mybox kernel: ide-cd: passing drive hdc to ide-scsi emulation.
Aug  4 17:58:58 mybox kernel: mice: PS/2 mouse device common for all mice
Aug  4 17:58:58 mybox kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Aug  4 17:58:58 mybox kernel: input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Aug  4 17:58:58 mybox kernel: input: PC Speaker
Aug  4 17:58:58 mybox kernel: NET: Registered protocol family 2
Aug  4 17:58:58 mybox kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
Aug  4 17:58:58 mybox kernel: TCP: Hash tables configured (established 16384 bind 32768)
Aug  4 17:58:58 mybox kernel: IPv4 over IPv4 tunneling driver
Aug  4 17:58:58 mybox kernel: GRE over IPv4 tunneling driver
Aug  4 17:58:58 mybox kernel: Initializing IPsec netlink socket
Aug  4 17:58:58 mybox kernel: NET: Registered protocol family 1
Aug  4 17:58:58 mybox kernel: NET: Registered protocol family 17
Aug  4 17:58:58 mybox kernel: ACPI: (supports S0 S3 S4 S5)
Aug  4 17:58:58 mybox kernel: ACPI wakeup devices:
Aug  4 17:58:58 mybox kernel: FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 PS2M PS2K
Aug  4 17:58:58 mybox kernel: kjournald starting.  Commit interval 5 seconds
Aug  4 17:58:58 mybox kernel: EXT3-fs: mounted filesystem with ordered data mode.
Aug  4 17:58:58 mybox kernel: VFS: Mounted root (ext3 filesystem) readonly.
Aug  4 17:58:58 mybox kernel: Freeing unused kernel memory: 112k freed
Aug  4 17:58:58 mybox kernel: SCSI subsystem initialized
Aug  4 17:58:58 mybox kernel: ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
Aug  4 17:58:58 mybox kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Aug  4 17:58:58 mybox kernel:   Vendor: IDE       Model: DVD-ROM 16X       Rev: 2.05
Aug  4 17:58:58 mybox kernel:   Type:   CD-ROM                             ANSI SCSI revision: 02
Aug  4 17:58:58 mybox kernel: scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Aug  4 17:58:58 mybox kernel:   Vendor: SONY      Model: CD-RW  CRX210E1   Rev: 2YS2
Aug  4 17:58:58 mybox kernel:   Type:   CD-ROM                             ANSI SCSI revision: 02
Aug  4 17:58:58 mybox kernel: hdb: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest }
Aug  4 17:58:58 mybox kernel: ide: failed opcode was 100
Aug  4 17:58:58 mybox kernel: hda: dma_timer_expiry: dma status == 0x60
Aug  4 17:58:58 mybox kernel: hda: DMA timeout retry
Aug  4 17:58:58 mybox kernel: hda: timeout waiting for DMA
Aug  4 17:58:58 mybox kernel: Adding 514040k swap on /dev/hda9.  Priority:-1 extents:1
Aug  4 17:58:58 mybox kernel: EXT3 FS on hda10, internal journal
Aug  4 17:58:58 mybox kernel: warning: process `update' used the obsolete bdflush system call
Aug  4 17:58:58 mybox kernel: Fix your initscripts?
Aug  4 17:58:58 mybox kernel: ohci1394: $Rev: 1226 $ Ben Collins <bcollins@debian.org>
Aug  4 17:58:58 mybox kernel: ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 9 (level, low) -> IRQ 9
Aug  4 17:58:58 mybox kernel: ohci1394: fw-host0: Unexpected PCI resource length of 1000!
Aug  4 17:58:58 mybox kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9]  MMIO=[e2427000-e24277ff]  Max Packet=[2048]
Aug  4 17:58:59 mybox pci.agent[720]:      ohci1394: loaded successfully
Aug  4 17:58:59 mybox kernel: snd: Unknown parameter `device_gid'
Aug  4 17:58:59 mybox kernel: ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 5 (level, low) -> IRQ 5
Aug  4 17:58:59 mybox kernel: intel8x0_measure_ac97_clock: measured 49512 usecs
Aug  4 17:58:59 mybox kernel: intel8x0: clocking to 48000
Aug  4 17:58:59 mybox pci.agent[782]:      snd-intel8x0: loaded successfully
Aug  4 17:58:59 mybox kernel: usbcore: registered new driver usbfs
Aug  4 17:58:59 mybox kernel: usbcore: registered new driver hub
Aug  4 17:58:59 mybox kernel: ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Aug  4 17:58:59 mybox kernel: ohci_hcd: block sizes: ed 64 td 64
Aug  4 17:58:59 mybox kernel: ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 9 (level, low) -> IRQ 9
Aug  4 17:58:59 mybox kernel: ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
Aug  4 17:58:59 mybox kernel: ohci_hcd 0000:00:03.0: irq 9, pci mem d12f4000
Aug  4 17:58:59 mybox kernel: ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
Aug  4 17:58:59 mybox kernel: hub 1-0:1.0: USB hub found
Aug  4 17:58:59 mybox kernel: hub 1-0:1.0: 2 ports detected
Aug  4 17:58:59 mybox kernel: ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 3 (level, low) -> IRQ 3
Aug  4 17:58:59 mybox kernel: ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
Aug  4 17:58:59 mybox usb.agent[866]:      usbcore: already loaded
Aug  4 17:59:00 mybox kernel: ohci_hcd 0000:00:03.1: irq 3, pci mem d12f6000
Aug  4 17:59:00 mybox kernel: ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
Aug  4 17:59:00 mybox usb.agent[917]:      usbcore: already loaded
Aug  4 17:59:00 mybox kernel: hub 2-0:1.0: USB hub found
Aug  4 17:59:00 mybox kernel: hub 2-0:1.0: 2 ports detected
Aug  4 17:59:00 mybox kernel: ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 10 (level, low) -> IRQ 10
Aug  4 17:59:00 mybox kernel: ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
Aug  4 17:59:00 mybox kernel: ohci_hcd 0000:00:03.2: irq 10, pci mem d12f8000
Aug  4 17:59:00 mybox kernel: ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
Aug  4 17:59:00 mybox kernel: ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000010dc001ee09a]
Aug  4 17:59:00 mybox usb.agent[969]:      usbcore: already loaded
Aug  4 17:59:00 mybox kernel: hub 3-0:1.0: USB hub found
Aug  4 17:59:00 mybox kernel: hub 3-0:1.0: 2 ports detected
Aug  4 17:59:00 mybox pci.agent[838]:      ohci-hcd: loaded successfully
Aug  4 17:59:00 mybox pci.agent[1007]:      ohci-hcd: already loaded
Aug  4 17:59:00 mybox kernel: usb 2-1: new full speed USB device using address 2
Aug  4 17:59:00 mybox pci.agent[1035]:      ohci-hcd: already loaded
Aug  4 17:59:00 mybox kernel: Initializing USB Mass Storage driver...
Aug  4 17:59:01 mybox kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Aug  4 17:59:01 mybox kernel: ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 11 (level, low) -> IRQ 11
Aug  4 17:59:01 mybox kernel: ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
Aug  4 17:59:01 mybox scsi.agent[1124]: disk at /devices/pci0000:00/0000:00:03.1/usb2/2-1/2-1:1.0/host2/2:0:0:0
Aug  4 17:59:01 mybox usb.agent[1072]:      usb-storage: loaded successfully
Aug  4 17:59:01 mybox kernel:   Vendor: Medion    Model: Flash XL      CF  Rev: 2.6D
Aug  4 17:59:01 mybox kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
Aug  4 17:59:01 mybox kernel: USB Mass Storage device found at 2
Aug  4 17:59:01 mybox kernel: usbcore: registered new driver usb-storage
Aug  4 17:59:01 mybox kernel: USB Mass Storage support registered.
Aug  4 17:59:01 mybox kernel: usb 3-1: new full speed USB device using address 2
Aug  4 17:59:01 mybox kernel: ehci_hcd 0000:00:03.3: irq 11, pci mem d1344000
Aug  4 17:59:01 mybox kernel: ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
Aug  4 17:59:01 mybox kernel: PCI: cache line size of 128 is not supported by device 0000:00:03.3
Aug  4 17:59:01 mybox kernel: ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
Aug  4 17:59:01 mybox usb.agent[1158]:      usbcore: already loaded
Aug  4 17:59:01 mybox kernel: hub 4-0:1.0: USB hub found
Aug  4 17:59:01 mybox kernel: hub 4-0:1.0: 6 ports detected
Aug  4 17:59:01 mybox pci.agent[1097]:      ehci-hcd: loaded successfully
Aug  4 17:59:01 mybox kernel: sis900.c: v1.08.07 11/02/2003
Aug  4 17:59:01 mybox kernel: ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 3 (level, low) -> IRQ 3
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 0.
Aug  4 17:59:01 mybox kernel: eth0: Realtek RTL8201 PHY transceiver found at address 1.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 2.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 3.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 4.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 5.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 6.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 7.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 8.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 9.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 10.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 11.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 12.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 13.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 14.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 15.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 16.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 17.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 18.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 19.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 20.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 21.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 22.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 23.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 24.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 25.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 26.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 27.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 28.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 29.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 30.
Aug  4 17:59:01 mybox kernel: eth0: Unknown PHY transceiver found at address 31.
Aug  4 17:59:01 mybox kernel: eth0: Using transceiver found at address 1 as default
Aug  4 17:59:01 mybox kernel: eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 3, 00:10:dc:af:b9:cc.
Aug  4 17:59:01 mybox pci.agent[1196]:      sis900: loaded successfully
Aug  4 17:59:02 mybox kernel: 8139too Fast Ethernet driver 0.9.27
Aug  4 17:59:02 mybox kernel: ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 5 (level, low) -> IRQ 5
Aug  4 17:59:02 mybox kernel: eth1: RealTek RTL8139 at 0xd1346000, 00:50:fc:2d:da:ef, IRQ 5
Aug  4 17:59:02 mybox kernel: eth1:  Identified 8139 chip type 'RTL-8139C'
Aug  4 17:59:02 mybox pci.agent[1242]:      8139too: loaded successfully
Aug  4 17:59:02 mybox kernel: Linux video capture interface: v1.00
Aug  4 17:59:02 mybox kernel: saa7130/34: v4l2 driver version 0.2.12 loaded
Aug  4 17:59:02 mybox kernel: ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 3 (level, low) -> IRQ 3
Aug  4 17:59:02 mybox kernel: saa7134[0]: found at 0000:00:08.0, rev: 1, irq: 3, latency: 32, mmio: 0xe2426000
Aug  4 17:59:02 mybox kernel: saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected]
Aug  4 17:59:02 mybox kernel: saa7134[0]: board init: gpio is 0
Aug  4 17:59:02 mybox kernel: saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9
Aug  4 17:59:02 mybox kernel: saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00
Aug  4 17:59:02 mybox kernel: saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff
Aug  4 17:59:02 mybox kernel: saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Aug  4 17:59:02 mybox kernel: tuner: chip found at addr 0xc0 i2c-bus saa7134[0]
Aug  4 17:59:02 mybox kernel: tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by saa7134[0]
Aug  4 17:59:02 mybox kernel: tda9885/6/7: chip found @ 0x86
Aug  4 17:59:02 mybox kernel: saa7134[0]: registered device video0 [v4l2]
Aug  4 17:59:02 mybox kernel: saa7134[0]: registered device vbi0
Aug  4 17:59:02 mybox kernel: saa7134[0]: registered device radio0
Aug  4 17:59:02 mybox pci.agent[1290]:      saa7134: loaded successfully
Aug  4 17:59:02 mybox pci.rc[641]:      ignoring pci display device on 01:00.0
Aug  4 17:59:04 mybox kernel: saa7134[0]/audio: audio carrier scan failed, using 5.500 MHz [default]
Aug  4 17:59:06 mybox kernel: usb 3-1: control timeout on ep0out
Aug  4 17:59:06 mybox kernel: ohci_hcd 0000:00:03.2: Unlink after no-IRQ?  Different ACPI or APIC settings may help.

[-- Attachment #3: .config --]
[-- Type: text/plain, Size: 32226 bytes --]

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_PAGG=y
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y

#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_LBD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_IDEDMA_FORCED=y
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8212 is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set

#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_CMP is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_FWMARK is not set
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=y

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_LIMIT is not set
# CONFIG_IP_NF_MATCH_IPRANGE is not set
# CONFIG_IP_NF_MATCH_MAC is not set
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
# CONFIG_IP_NF_MATCH_MARK is not set
# CONFIG_IP_NF_MATCH_MULTIPORT is not set
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
# CONFIG_IP_NF_MATCH_STATE is not set
# CONFIG_IP_NF_MATCH_CONNTRACK is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_NAT_NEEDED=y
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
CONFIG_IP_NF_ARPTABLES=m
# CONFIG_IP_NF_ARPFILTER is not set
# CONFIG_IP_NF_ARP_MANGLE is not set
CONFIG_IP_NF_COMPAT_IPCHAINS=m
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=y

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_UINPUT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=10
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=y
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_RTC_IRQ=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m

#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_I810=y
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set

#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set

#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
CONFIG_VIDEO_SAA7134=m
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_IR=m

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
# CONFIG_LOGO is not set

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set

#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="iso8859-15"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_POSIX=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_4KSTACKS=y

#
# Security options
#
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=m
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_SELINUX is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y

[-- Attachment #4: lspci.txt --]
[-- Type: text/plain, Size: 10549 bytes --]


0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS 645xx (rev 02)
        Subsystem: Silicon Integrated Systems [SiS] SiS 645xx
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 32
        Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=128M]
        Capabilities: [c0] AGP version 3.0
                Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
                Command: RQ=1 ArqSz=0 Cal=3 SBA+ AGP+ GART64- 64bit- FW- Rate=x8

0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: e0000000-e1ffffff
        Prefetchable memory behind bridge: d8000000-dfffffff
        BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-

0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 04)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 169
        Region 4: I/O ports at 10c0 [size=32]

0000:00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller (prog-if 10 [OHCI])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 701d
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (1000ns min, 3000ns max)
        Interrupt: pin B routed to IRQ 169
        Region 0: Memory at e2427000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [64] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME+

0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 128
        Interrupt: pin ? routed to IRQ 177
        Region 4: I/O ports at 4000 [size=16]
        Capabilities: [58] Power Management version 2
                Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (13000ns min, 2750ns max)
        Interrupt: pin C routed to IRQ 185
        Region 0: I/O ports at d400 [size=256]
        Region 1: I/O ports at d800 [size=128]
        Capabilities: [48] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 193
        Region 0: Memory at e2420000 (32-bit, non-prefetchable) [size=4K]

0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin B routed to IRQ 201
        Region 0: Memory at e2421000 (32-bit, non-prefetchable) [size=4K]

0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin C routed to IRQ 209
        Region 0: Memory at e2422000 (32-bit, non-prefetchable) [size=4K]

0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max)
        Interrupt: pin D routed to IRQ 217
        Region 0: Memory at e2423000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 0900
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (13000ns min, 2750ns max)
        Interrupt: pin A routed to IRQ 225
        Region 0: I/O ports at dc00 [size=256]
        Region 1: Memory at e2424000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 185
        Region 0: I/O ports at e000 [size=256]
        Region 1: Memory at e2425000 (32-bit, non-prefetchable) [size=256]

0000:00:08.0 Multimedia controller: Philips Semiconductors SAA7134 (rev 01)
        Subsystem: Creatix Polymedia GmbH: Unknown device 0003
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (2000ns min, 8000ns max)
        Interrupt: pin A routed to IRQ 225
        Region 0: Memory at e2426000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [40] Power Management version 1
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-

0000:00:0a.0 Communication controller: Intel Corp. 536EP Data Fax Modem
        Subsystem: Creatix Polymedia GmbH V.9X DSP Data Fax Modem
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 169
        Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=4M]
        Capabilities: [e0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2+ AuxCurrent=375mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA])
        Subsystem: CardExpert Technology: Unknown device 0431
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 248 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 177
        Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [44] AGP version 3.0
                Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
                Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-04 11:42               ` 2.6.8-rc2-mm2 bert hubert
@ 2004-08-05  1:21                 ` Nick Piggin
  0 siblings, 0 replies; 55+ messages in thread
From: Nick Piggin @ 2004-08-05  1:21 UTC (permalink / raw)
  To: bert hubert; +Cc: Con Kolivas, Andrew Morton, linux-kernel, Ingo Molnar

bert hubert wrote:

>On Wed, Aug 04, 2004 at 08:33:44PM +1000, Nick Piggin wrote:
>
>
>>>Well duh... disable interactivity and interactivity is bad. What's the 
>>>problem? It's not meant to be used on a desktop in that way.
>>>
>>Well why would you want to disable it then?
>>
>
>When not on a desktop of course - most servers don't care about X
>interactivity but do care a lot about 'nice', and would not want to grant a
>process the CPU (unfairly) longer to satisfy the human need for snappy
>responses.
>
>

Fairness is a pretty basic property though, and should not be dropped 
lightly.
Even on the desktop, unfairness could be explicitly wrong for a small number
of users, while also opening you up to "implicit" corner cases.

As far as interactivity goes maybe it can be disregarded on servers, 
maybe it
can't. What about multi user servers? Does it only apply to X interactivity?
Then how about multi user desktops? Maybe not a big deal.

Fairness should be fundamental though (IMO).


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-04 12:45               ` 2.6.8-rc2-mm2 Ingo Molnar
@ 2004-08-05  2:53                 ` Con Kolivas
  2004-08-05  8:34                   ` 2.6.8-rc2-mm2 Helge Hafting
  2004-08-05 10:47                   ` 2.6.8-rc2-mm2 Ingo Molnar
  0 siblings, 2 replies; 55+ messages in thread
From: Con Kolivas @ 2004-08-05  2:53 UTC (permalink / raw)
  To: Ingo Molnar; +Cc: Nick Piggin, Andrew Morton, linux-kernel

Ingo Molnar writes:

> 
> * Con Kolivas <kernel@kolivas.org> wrote:
> 
>> Ingo Molnar writes:
>> 
>> Thanks for replying.
>> 
>> >* Nick Piggin <nickpiggin@yahoo.com.au> wrote:
>> >
>> >>Also, basic interactivity in X is bad with the interactive sysctl set
>> >>to 0 (is X supposed to be at nice 0?), however fairness is bad when
>> >>interactive is 1. I'm not sure if this is an acceptable tradeoff - are
>> >>you planning to fix it?
>> >
>> >it also has clear interactivity problems when just running lots of CPU
>> >hogs even with the default interactive=1 compute=0 setting.
>> 
>> Can you define them please? I haven't had any reported to me.
> 
> sure: take a process that uses 85% of CPU time (and sleeps 15% of the
> time) if running on an idle system. Start just two of these hogs at
> normal priority. 2.6.8-rc2-mm2 becomes almost instantly unusable even
> over a text console: a single 'top' refresh takes ages, 'ls' displays
> one line per second or so. Start more of these and the system
> effectively locks up.

It's only if I physically try and create such a test application that I can 
reproduce it. I haven't found any real world load that does that - but of 
course that doesn't mean I should discount it. However, interactive mode off 
doesn't exhibit it and it should be easy enough to fix for interactive mode 
on. Thanks for pointing it out.

Cheers,
Con


^ permalink raw reply	[flat|nested] 55+ messages in thread

* [sparc32] [1/13] turbosparc flush warnings
  2004-08-02  8:55 2.6.8-rc2-mm2 Andrew Morton
                   ` (13 preceding siblings ...)
  2004-08-04 16:32 ` 2.6.8-rc2-mm2 Dominik Karall
@ 2004-08-05  4:38 ` William Lee Irwin III
  2004-08-05  4:39   ` [sparc32] [2/13] sparc32 init_idle() William Lee Irwin III
  14 siblings, 1 reply; 55+ messages in thread
From: William Lee Irwin III @ 2004-08-05  4:38 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel

On Mon, Aug 02, 2004 at 01:55:27AM -0700, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc2/2.6.8-rc2-mm2/

viro needs to do sparse work on sparc32, so this series of patches
fixes up the compile for him.


FLUSH_BEGIN() is a nop at the moment, so the mm variable for its
argument trips a warning. Pass vma->vm_mm directly instead.


Index: mm2-2.6.8-rc2/arch/sparc/mm/srmmu.c
===================================================================
--- mm2-2.6.8-rc2.orig/arch/sparc/mm/srmmu.c
+++ mm2-2.6.8-rc2/arch/sparc/mm/srmmu.c
@@ -1697,9 +1697,7 @@
 
 static void turbosparc_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
-	struct mm_struct *mm = vma->vm_mm;
-
-	FLUSH_BEGIN(mm)
+	FLUSH_BEGIN(vma->vm_mm)
 	flush_user_windows();
 	turbosparc_idflash_clear();
 	FLUSH_END
@@ -1750,9 +1748,7 @@
 
 static void turbosparc_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
-	struct mm_struct *mm = vma->vm_mm;
-
-	FLUSH_BEGIN(mm)
+	FLUSH_BEGIN(vma->vm_mm)
 	srmmu_flush_whole_tlb();
 	FLUSH_END
 }

^ permalink raw reply	[flat|nested] 55+ messages in thread

* [sparc32] [2/13] sparc32 init_idle()
  2004-08-05  4:38 ` [sparc32] [1/13] turbosparc flush warnings William Lee Irwin III
@ 2004-08-05  4:39   ` William Lee Irwin III
  2004-08-05  4:41     ` [sparc32] [3/13] sun4d cpu_present_map is a cpumask_t William Lee Irwin III
  0 siblings, 1 reply; 55+ messages in thread
From: William Lee Irwin III @ 2004-08-05  4:39 UTC (permalink / raw)
  To: Andrew Morton, linux-kernel

On Wed, Aug 04, 2004 at 09:38:17PM -0700, William Lee Irwin III wrote:
> viro needs to do sparse work on sparc32, so this series of patches
> fixes up the compile for him.

An analysis of the code determined that AP initialization called
init_idle() no less than three times, 2 out of the three with incorrect
numbers of arguments. This patch removes the superfluous calls.


Index: mm2-2.6.8-rc2/arch/sparc/kernel/sun4m_smp.c
===================================================================
--- mm2-2.6.8-rc2.orig/arch/sparc/kernel/sun4m_smp.c
+++ mm2-2.6.8-rc2/arch/sparc/kernel/sun4m_smp.c
@@ -95,8 +95,6 @@
 	 * the SMP initialization the master will be just allowed
 	 * to call the scheduler code.
 	 */
-	init_idle();
-
 	/* Allow master to continue. */
 	swap((unsigned long *)&cpu_callin_map[cpuid], 1);
 
Index: mm2-2.6.8-rc2/arch/sparc/kernel/sun4d_smp.c
===================================================================
--- mm2-2.6.8-rc2.orig/arch/sparc/kernel/sun4d_smp.c
+++ mm2-2.6.8-rc2/arch/sparc/kernel/sun4d_smp.c
@@ -100,8 +100,6 @@
 	 * the SMP initialization the master will be just allowed
 	 * to call the scheduler code.
 	 */
-	init_idle();
-
 	/* Get our local ticker going. */
 	smp_setup_percpu_timer();
 
Index: mm2-2.6.8-rc2/arch/sparc/kernel/trampoline.S
===================================================================
--- mm2-2.6.8-rc2.orig/arch/sparc/kernel/trampoline.S
+++ mm2-2.6.8-rc2/arch/sparc/kernel/trampoline.S
@@ -88,8 +88,6 @@
 	.align	4
 
 smp_do_cpu_idle:
-	call	init_idle
-	 nop
 	call	cpu_idle
 	 mov	0, %o0
 

^ permalink raw reply	[flat|nested] 55+ messages in thread

* [sparc32] [3/13] sun4d cpu_present_map is a cpumask_t
  2004-08-05  4:39   ` [sparc32] [2/13] sparc32 init_idle() William Lee Irwin III
@ 2004-08-05  4:41     ` William Lee Irwin III
  2004-08-05  4:44       ` [sparc32] [4/13] smp_processor_id() BITFIXUP fixes William Lee Irwin III
  0 siblings, 1 reply; 55+ messages in thread
From: William Lee Irwin III @ 2004-08-05  4:41 UTC (permalink / raw)
  To: Andrew Morton, linux-kernel

On Wed, Aug 04, 2004 at 09:39:57PM -0700, William Lee Irwin III wrote:
> An analysis of the code determined that AP initialization called
> init_idle() no less than three times, 2 out of the three with incorrect
> numbers of arguments. This patch removes the superfluous calls.

cpu_present_map is a cpumask_t. Sweep arch/sparc/kernel/sun4d_smp.c so
that it is treated as such.

Index: mm2-2.6.8-rc2/arch/sparc/kernel/sun4d_smp.c
===================================================================
--- mm2-2.6.8-rc2.orig/arch/sparc/kernel/sun4d_smp.c
+++ mm2-2.6.8-rc2/arch/sparc/kernel/sun4d_smp.c
@@ -43,7 +43,6 @@
 extern void calibrate_delay(void);
 
 extern volatile int smp_processors_ready;
-extern unsigned long cpu_present_map;
 extern int smp_num_cpus;
 static int smp_highest_cpu;
 extern int smp_threads_ready;
@@ -172,12 +171,12 @@
 		current_set[0] = NULL;
 
 	local_irq_enable();
-	cpu_present_map = 0;
+	cpus_clear(cpu_present_map);
 
 	/* XXX This whole thing has to go.  See sparc64. */
 	for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++)
-		cpu_present_map |= (1<<mid);
-	SMP_PRINTK(("cpu_present_map %08lx\n", cpu_present_map));
+		cpu_set(mid, cpu_present_map);
+	SMP_PRINTK(("cpu_present_map %08lx\n", cpus_addr(cpu_present_map)[0]));
 	for(i=0; i < NR_CPUS; i++)
 		__cpu_number_map[i] = -1;
 	for(i=0; i < NR_CPUS; i++)
@@ -195,7 +194,7 @@
 		if(i == boot_cpu_id)
 			continue;
 
-		if(cpu_present_map & (1 << i)) {
+		if (cpu_isset(i, cpu_present_map)) {
 			extern unsigned long sun4d_cpu_startup;
 			unsigned long *entry = &sun4d_cpu_startup;
 			struct task_struct *p;
@@ -252,19 +251,19 @@
 			}
 		}
 		if(!(cpu_callin_map[i])) {
-			cpu_present_map &= ~(1 << i);
+			cpu_clear(i, cpu_present_map);
 			__cpu_number_map[i] = -1;
 		}
 	}
 	local_flush_cache_all();
 	if(cpucount == 0) {
 		printk("Error: only one Processor found.\n");
-		cpu_present_map = (1 << hard_smp4d_processor_id());
+		cpu_present_map = cpumask_of_cpu(hard_smp4d_processor_id());
 	} else {
 		unsigned long bogosum = 0;
 		
 		for(i = 0; i < NR_CPUS; i++) {
-			if(cpu_present_map & (1 << i)) {
+			if (cpu_isset(i, cpu_present_map)) {
 				bogosum += cpu_data(i).udelay_val;
 				smp_highest_cpu = i;
 			}
@@ -344,12 +343,13 @@
 
 		/* Init receive/complete mapping, plus fire the IPI's off. */
 		{
-			register unsigned long mask;
+			cpumask_t mask;
 			register int i;
 
-			mask = (cpu_present_map & ~(1 << hard_smp4d_processor_id()));
+			mask = cpumask_of_cpu(hard_smp4d_processor_id());
+			cpus_andnot(mask, cpu_present_map, mask);
 			for(i = 0; i <= high; i++) {
-				if(mask & (1 << i)) {
+				if (cpu_isset(i, mask)) {
 					ccall_info.processors_in[i] = 0;
 					ccall_info.processors_out[i] = 0;
 					sun4d_send_ipi(i, IRQ_CROSS_CALL);

^ permalink raw reply	[flat|nested] 55+ messages in thread

* [sparc32] [4/13] smp_processor_id() BITFIXUP fixes
  2004-08-05  4:41     ` [sparc32] [3/13] sun4d cpu_present_map is a cpumask_t William Lee Irwin III
@ 2004-08-05  4:44       ` William Lee Irwin III
  2004-08-05  4:46         ` [sparc32] [5/13] reinstate smp_reschedule_irq() William Lee Irwin III
  0 siblings, 1 reply; 55+ messages in thread
From: William Lee Irwin III @ 2004-08-05  4:44 UTC (permalink / raw)
  To: Andrew Morton, linux-kernel

On Wed, Aug 04, 2004 at 09:41:30PM -0700, William Lee Irwin III wrote:
> cpu_present_map is a cpumask_t. Sweep arch/sparc/kernel/sun4d_smp.c so
> that it is treated as such.

The SMP initialization functions try to do btfixups on the wrong
symbols for smp_processor_id(), which is now implemented in terms
of current_thread_info()->cpu. hard_smp_processor_id() etc. are now
in use where smp_processor_id() was once used.


Index: mm2-2.6.8-rc2/arch/sparc/kernel/sun4m_smp.c
===================================================================
--- mm2-2.6.8-rc2.orig/arch/sparc/kernel/sun4m_smp.c
+++ mm2-2.6.8-rc2/arch/sparc/kernel/sun4m_smp.c
@@ -458,9 +458,9 @@
 
 void __init sun4m_init_smp(void)
 {
-	BTFIXUPSET_BLACKBOX(smp_processor_id, smp4m_blackbox_id);
+	BTFIXUPSET_BLACKBOX(hard_smp_processor_id, smp4m_blackbox_id);
 	BTFIXUPSET_BLACKBOX(load_current, smp4m_blackbox_current);
 	BTFIXUPSET_CALL(smp_cross_call, smp4m_cross_call, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(smp_message_pass, smp4m_message_pass, BTFIXUPCALL_NORM);
-	BTFIXUPSET_CALL(__smp_processor_id, __smp4m_processor_id, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(__hard_smp_processor_id, __smp4m_processor_id, BTFIXUPCALL_NORM);
 }
Index: mm2-2.6.8-rc2/arch/sparc/kernel/sun4d_smp.c
===================================================================
--- mm2-2.6.8-rc2.orig/arch/sparc/kernel/sun4d_smp.c
+++ mm2-2.6.8-rc2/arch/sparc/kernel/sun4d_smp.c
@@ -496,11 +496,11 @@
 	t_nmi[1] = t_nmi[1] + (linux_trap_ipi15_sun4d - linux_trap_ipi15_sun4m);
 	
 	/* And set btfixup... */
-	BTFIXUPSET_BLACKBOX(smp_processor_id, smp4d_blackbox_id);
+	BTFIXUPSET_BLACKBOX(hard_smp_processor_id, smp4d_blackbox_id);
 	BTFIXUPSET_BLACKBOX(load_current, smp4d_blackbox_current);
 	BTFIXUPSET_CALL(smp_cross_call, smp4d_cross_call, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(smp_message_pass, smp4d_message_pass, BTFIXUPCALL_NORM);
-	BTFIXUPSET_CALL(__smp_processor_id, __smp4d_processor_id, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(__hard_smp_processor_id, __smp4d_processor_id, BTFIXUPCALL_NORM);
 	
 	for (i = 0; i < NR_CPUS; i++) {
 		ccall_info.processors_in[i] = 1;

^ permalink raw reply	[flat|nested] 55+ messages in thread

* [sparc32] [5/13] reinstate smp_reschedule_irq()
  2004-08-05  4:44       ` [sparc32] [4/13] smp_processor_id() BITFIXUP fixes William Lee Irwin III
@ 2004-08-05  4:46         ` William Lee Irwin III
  2004-08-05  4:47           ` [sparc32] [6/13] remove references to start_secondary() William Lee Irwin III
  0 siblings, 1 reply; 55+ messages in thread
From: William Lee Irwin III @ 2004-08-05  4:46 UTC (permalink / raw)
  To: Andrew Morton, linux-kernel

On Wed, Aug 04, 2004 at 09:44:27PM -0700, William Lee Irwin III wrote:
> The SMP initialization functions try to do btfixups on the wrong
> symbols for smp_processor_id(), which is now implemented in terms
> of current_thread_info()->cpu. hard_smp_processor_id() etc. are now
> in use where smp_processor_id() was once used.

smp_reschedule_irq() mysteriously vanished sometime after 2.4.
This patch reinstates it so that the kernel will link properly
and so cpus will set TIF_NEED_RESCHED when it's asked of them.

Index: mm2-2.6.8-rc2/arch/sparc/kernel/smp.c
===================================================================
--- mm2-2.6.8-rc2.orig/arch/sparc/kernel/smp.c
+++ mm2-2.6.8-rc2/arch/sparc/kernel/smp.c
@@ -203,6 +203,11 @@
 	}
 }
 
+void smp_reschedule_irq(void)
+{
+	set_need_resched();
+}
+
 void smp_flush_page_to_ram(unsigned long page)
 {
 	/* Current theory is that those who call this are the one's

^ permalink raw reply	[flat|nested] 55+ messages in thread

* [sparc32] [6/13] remove references to start_secondary()
  2004-08-05  4:46         ` [sparc32] [5/13] reinstate smp_reschedule_irq() William Lee Irwin III
@ 2004-08-05  4:47           ` William Lee Irwin III
  2004-08-05  4:48             ` [sparc32] [7/13] remove references to num_context_patch2 William Lee Irwin III
  0 siblings, 1 reply; 55+ messages in thread
From: William Lee Irwin III @ 2004-08-05  4:47 UTC (permalink / raw)
  To: Andrew Morton, linux-kernel

On Wed, Aug 04, 2004 at 09:46:27PM -0700, William Lee Irwin III wrote:
> smp_reschedule_irq() mysteriously vanished sometime after 2.4.
> This patch reinstates it so that the kernel will link properly
> and so cpus will set TIF_NEED_RESCHED when it's asked of them.

This looks rather unusual, however, this is what sparc32 really wants.
The function pointer argument to kernel_thread() is irrelevant here;
the execution state of the thread is established in the SMP trampoline.

Index: mm2-2.6.8-rc2/arch/sparc/kernel/sun4m_smp.c
===================================================================
--- mm2-2.6.8-rc2.orig/arch/sparc/kernel/sun4m_smp.c
+++ mm2-2.6.8-rc2/arch/sparc/kernel/sun4m_smp.c
@@ -124,7 +124,6 @@
 extern int cpu_idle(void *unused);
 extern void init_IRQ(void);
 extern void cpu_panic(void);
-extern int start_secondary(void *unused);
 
 /*
  *	Cycle through the processors asking the PROM to start each one.
@@ -174,7 +173,7 @@
 			int timeout;
 
 			/* Cook up an idler for this guy. */
-			kernel_thread(start_secondary, NULL, CLONE_IDLETASK);
+			kernel_thread(NULL, NULL, CLONE_IDLETASK);
 
 			cpucount++;
 
Index: mm2-2.6.8-rc2/arch/sparc/kernel/sun4d_smp.c
===================================================================
--- mm2-2.6.8-rc2.orig/arch/sparc/kernel/sun4d_smp.c
+++ mm2-2.6.8-rc2/arch/sparc/kernel/sun4d_smp.c
@@ -149,7 +149,6 @@
 extern int cpu_idle(void *unused);
 extern void init_IRQ(void);
 extern void cpu_panic(void);
-extern int start_secondary(void *unused);
 
 /*
  *	Cycle through the processors asking the PROM to start each one.
@@ -202,7 +201,7 @@
 			int no;
 
 			/* Cook up an idler for this guy. */
-			kernel_thread(start_secondary, NULL, CLONE_IDLETASK);
+			kernel_thread(NULL, NULL, CLONE_IDLETASK);
 
 			cpucount++;
 

^ permalink raw reply	[flat|nested] 55+ messages in thread

* [sparc32] [7/13] remove references to num_context_patch2
  2004-08-05  4:47           ` [sparc32] [6/13] remove references to start_secondary() William Lee Irwin III
@ 2004-08-05  4:48             ` William Lee Irwin III
  2004-08-05  4:49               ` [sparc32] [8/13] define cache_decay_ticks William Lee Irwin III
  0 siblings, 1 reply; 55+ messages in thread
From: William Lee Irwin III @ 2004-08-05  4:48 UTC (permalink / raw)
  To: Andrew Morton, linux-kernel

On Wed, Aug 04, 2004 at 09:47:36PM -0700, William Lee Irwin III wrote:
> This looks rather unusual, however, this is what sparc32 really wants.
> The function pointer argument to kernel_thread() is irrelevant here;
> the execution state of the thread is established in the SMP trampoline.

num_context_patch2 is never defined, only declared. However, these
declarations generate an undefined symbol reference. So remove it.

Index: mm2-2.6.8-rc2/arch/sparc/kernel/entry.S
===================================================================
--- mm2-2.6.8-rc2.orig/arch/sparc/kernel/entry.S
+++ mm2-2.6.8-rc2/arch/sparc/kernel/entry.S
@@ -858,7 +858,7 @@
 vac_hwflush_patch2_on:		sta	%g0, [%l3 + %l7] ASI_HWFLUSHSEG
 
 	.globl	invalid_segment_patch1, invalid_segment_patch2
-	.globl	num_context_patch1, num_context_patch2
+	.globl	num_context_patch1
 	.globl	vac_linesize_patch, vac_hwflush_patch1
 	.globl	vac_hwflush_patch2
 
Index: mm2-2.6.8-rc2/arch/sparc/mm/sun4c.c
===================================================================
--- mm2-2.6.8-rc2.orig/arch/sparc/mm/sun4c.c
+++ mm2-2.6.8-rc2/arch/sparc/mm/sun4c.c
@@ -379,7 +379,7 @@
 extern unsigned long invalid_segment_patch2, invalid_segment_patch2_ff;
 extern unsigned long invalid_segment_patch1_1ff, invalid_segment_patch2_1ff;
 extern unsigned long num_context_patch1, num_context_patch1_16;
-extern unsigned long num_context_patch2, num_context_patch2_16;
+extern unsigned long num_context_patch2_16;
 extern unsigned long vac_linesize_patch, vac_linesize_patch_32;
 extern unsigned long vac_hwflush_patch1, vac_hwflush_patch1_on;
 extern unsigned long vac_hwflush_patch2, vac_hwflush_patch2_on;

^ permalink raw reply	[flat|nested] 55+ messages in thread

* [sparc32] [8/13] define cache_decay_ticks
  2004-08-05  4:48             ` [sparc32] [7/13] remove references to num_context_patch2 William Lee Irwin III
@ 2004-08-05  4:49               ` William Lee Irwin III
  2004-08-05  4:54                 ` [sparc32] [9/13] remove unused variable in dvma.c William Lee Irwin III
  0 siblings, 1 reply; 55+ messages in thread
From: William Lee Irwin III @ 2004-08-05  4:49 UTC (permalink / raw)
  To: Andrew Morton, linux-kernel

On Wed, Aug 04, 2004 at 09:48:39PM -0700, William Lee Irwin III wrote:
> num_context_patch2 is never defined, only declared. However, these
> declarations generate an undefined symbol reference. So remove it.

cache_decay_ticks needs to be defined in order for the kernel to link.
This placeholder is inaccurate, however, other, more grave SMP issues
need to be addressed first.

Index: mm2-2.6.8-rc2/arch/sparc/kernel/smp.c
===================================================================
--- mm2-2.6.8-rc2.orig/arch/sparc/kernel/smp.c
+++ mm2-2.6.8-rc2/arch/sparc/kernel/smp.c
@@ -45,6 +45,7 @@
 volatile int __cpu_number_map[NR_CPUS];
 volatile int __cpu_logical_map[NR_CPUS];
 cycles_t cacheflush_time = 0; /* XXX */
+unsigned long cache_decay_ticks = 100;
 
 cpumask_t cpu_online_map = CPU_MASK_NONE;
 cpumask_t phys_cpu_present_map = CPU_MASK_NONE;

^ permalink raw reply	[flat|nested] 55+ messages in thread

* [sparc32] [9/13] remove unused variable in dvma.c
  2004-08-05  4:49               ` [sparc32] [8/13] define cache_decay_ticks William Lee Irwin III
@ 2004-08-05  4:54                 ` William Lee Irwin III
  2004-08-05  4:55                   ` [sparc32] [10/13] sun4 does not support SMP William Lee Irwin III
  0 siblings, 1 reply; 55+ messages in thread
From: William Lee Irwin III @ 2004-08-05  4:54 UTC (permalink / raw)
  To: Andrew Morton, linux-kernel

On Wed, Aug 04, 2004 at 09:49:50PM -0700, William Lee Irwin III wrote:
> cache_decay_ticks needs to be defined in order for the kernel to link.
> This placeholder is inaccurate, however, other, more grave SMP issues
> need to be addressed first.

This variable is unused and causes noisy compiles.

Index: mm2-2.6.8-rc2/drivers/sbus/dvma.c
===================================================================
--- mm2-2.6.8-rc2.orig/drivers/sbus/dvma.c
+++ mm2-2.6.8-rc2/drivers/sbus/dvma.c
@@ -121,7 +121,6 @@
 void __init sun4_dvma_init(void)
 {
 	struct sbus_dma *dma;
-	struct sbus_dma *dchain;
 	struct resource r;
 
 	if(sun4_dma_physaddr) {

^ permalink raw reply	[flat|nested] 55+ messages in thread

* [sparc32] [10/13] sun4 does not support SMP
  2004-08-05  4:54                 ` [sparc32] [9/13] remove unused variable in dvma.c William Lee Irwin III
@ 2004-08-05  4:55                   ` William Lee Irwin III
  2004-08-05  4:56                     ` [sparc32] [11/13] make CONFIG_SMP depend on CONFIG_BROKEN William Lee Irwin III
  0 siblings, 1 reply; 55+ messages in thread
From: William Lee Irwin III @ 2004-08-05  4:55 UTC (permalink / raw)
  To: Andrew Morton, linux-kernel

On Wed, Aug 04, 2004 at 09:54:17PM -0700, William Lee Irwin III wrote:
> This variable is unused and causes noisy compiles.

The sun4 port does not support SMP. Disable it via Kconfig.

Index: mm2-2.6.8-rc2/arch/sparc/Kconfig
===================================================================
--- mm2-2.6.8-rc2.orig/arch/sparc/Kconfig
+++ mm2-2.6.8-rc2/arch/sparc/Kconfig
@@ -221,6 +221,7 @@
 
 config SUN4
 	bool "Support for SUN4 machines (disables SUN4[CDM] support)"
+	depends on !SMP
 	help
 	  Say Y here if, and only if, your machine is a sun4. Note that
 	  a kernel compiled with this option will run only on sun4.

^ permalink raw reply	[flat|nested] 55+ messages in thread

* [sparc32] [11/13] make CONFIG_SMP depend on CONFIG_BROKEN
  2004-08-05  4:55                   ` [sparc32] [10/13] sun4 does not support SMP William Lee Irwin III
@ 2004-08-05  4:56                     ` William Lee Irwin III
  2004-08-05  5:01                       ` [sparc32] [12/13] gcc-3.3 macro parenthesization fix for memcpy.S William Lee Irwin III
  0 siblings, 1 reply; 55+ messages in thread
From: William Lee Irwin III @ 2004-08-05  4:56 UTC (permalink / raw)
  To: Andrew Morton, linux-kernel

On Wed, Aug 04, 2004 at 09:55:28PM -0700, William Lee Irwin III wrote:
> The sun4 port does not support SMP. Disable it via Kconfig.

SMP support is in need of a great deal of work to port it from 2.2 and
2.4. Add a dependency on BROKEN in the Kconfig to warn the unwary.

Index: mm2-2.6.8-rc2/arch/sparc/Kconfig
===================================================================
--- mm2-2.6.8-rc2.orig/arch/sparc/Kconfig
+++ mm2-2.6.8-rc2/arch/sparc/Kconfig
@@ -83,6 +83,7 @@
 
 config SMP
 	bool "Symmetric multi-processing support (does not work on sun4/sun4c)"
+	depends on BROKEN
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If

^ permalink raw reply	[flat|nested] 55+ messages in thread

* [sparc32] [12/13] gcc-3.3 macro parenthesization fix for memcpy.S
  2004-08-05  4:56                     ` [sparc32] [11/13] make CONFIG_SMP depend on CONFIG_BROKEN William Lee Irwin III
@ 2004-08-05  5:01                       ` William Lee Irwin III
  2004-08-05  5:31                         ` [sparc32] [13/13] ignore undefined symbols with 3 or more leading underscores William Lee Irwin III
  2004-08-05  7:28                         ` [sparc32] [12/13] gcc-3.3 macro parenthesization fix for memcpy.S Jakub Jelinek
  0 siblings, 2 replies; 55+ messages in thread
From: William Lee Irwin III @ 2004-08-05  5:01 UTC (permalink / raw)
  To: Andrew Morton, linux-kernel

On Wed, Aug 04, 2004 at 09:56:43PM -0700, William Lee Irwin III wrote:
> SMP support is in need of a great deal of work to port it from 2.2 and
> 2.4. Add a dependency on BROKEN in the Kconfig to warn the unwary.

From: Art Haas <ahaas@airmail.net>

The 1.3->1.4 changes to the arch/sparc/lib/copy_user.S file added
parenthesis to a number of macros within that file. The BK changlog
associated with this change indicate the change was to make the
file work with gcc-3.3.

When looking at the changes made, I see that similar macros exist in
memcpy.S as well, so would a patch adding parens to that file be
worthwhile? Also, just what was the problem with gcc-3.3 that was
resolved by adding the parenthesis? Macro mis-expansion I'm guessing.

Signed-off-by: Art Haas <ahaas@airmail.net>
Signed-off-by: William Irwin <wli@holomorphy.com>


Index: mm2-2.6.8-rc2/arch/sparc/lib/memcpy.S
===================================================================
--- mm2-2.6.8-rc2.orig/arch/sparc/lib/memcpy.S
+++ mm2-2.6.8-rc2/arch/sparc/lib/memcpy.S
@@ -42,124 +42,124 @@
 #endif
 
 /* Both these macros have to start with exactly the same insn */
-#define MOVE_BIGCHUNK(src, dst, offset, t0, t1, t2, t3, t4, t5, t6, t7) 				\
-	ldd	[%src + offset + 0x00], %t0; 								\
-	ldd	[%src + offset + 0x08], %t2; 								\
-	ldd	[%src + offset + 0x10], %t4; 								\
-	ldd	[%src + offset + 0x18], %t6; 								\
-	st	%t0, [%dst + offset + 0x00]; 								\
-	st	%t1, [%dst + offset + 0x04]; 								\
-	st	%t2, [%dst + offset + 0x08]; 								\
-	st	%t3, [%dst + offset + 0x0c]; 								\
-	st	%t4, [%dst + offset + 0x10]; 								\
-	st	%t5, [%dst + offset + 0x14]; 								\
-	st	%t6, [%dst + offset + 0x18]; 								\
-	st	%t7, [%dst + offset + 0x1c];
-
-#define MOVE_BIGALIGNCHUNK(src, dst, offset, t0, t1, t2, t3, t4, t5, t6, t7) 				\
-	ldd	[%src + offset + 0x00], %t0; 								\
-	ldd	[%src + offset + 0x08], %t2; 								\
-	ldd	[%src + offset + 0x10], %t4; 								\
-	ldd	[%src + offset + 0x18], %t6; 								\
-	std	%t0, [%dst + offset + 0x00]; 								\
-	std	%t2, [%dst + offset + 0x08]; 								\
-	std	%t4, [%dst + offset + 0x10]; 								\
-	std	%t6, [%dst + offset + 0x18];
-
-#define MOVE_LASTCHUNK(src, dst, offset, t0, t1, t2, t3) 						\
-	ldd	[%src - offset - 0x10], %t0; 								\
-	ldd	[%src - offset - 0x08], %t2; 								\
-	st	%t0, [%dst - offset - 0x10]; 								\
-	st	%t1, [%dst - offset - 0x0c]; 								\
-	st	%t2, [%dst - offset - 0x08]; 								\
-	st	%t3, [%dst - offset - 0x04];
-
-#define MOVE_LASTALIGNCHUNK(src, dst, offset, t0, t1, t2, t3) 						\
-	ldd	[%src - offset - 0x10], %t0; 								\
-	ldd	[%src - offset - 0x08], %t2; 								\
-	std	%t0, [%dst - offset - 0x10]; 								\
-	std	%t2, [%dst - offset - 0x08];
-
-#define MOVE_SHORTCHUNK(src, dst, offset, t0, t1) 							\
-	ldub	[%src - offset - 0x02], %t0; 								\
-	ldub	[%src - offset - 0x01], %t1; 								\
-	stb	%t0, [%dst - offset - 0x02]; 								\
-	stb	%t1, [%dst - offset - 0x01];
+#define MOVE_BIGCHUNK(src, dst, offset, t0, t1, t2, t3, t4, t5, t6, t7) \
+	ldd	[%src + (offset) + 0x00], %t0; \
+	ldd	[%src + (offset) + 0x08], %t2; \
+	ldd	[%src + (offset) + 0x10], %t4; \
+	ldd	[%src + (offset) + 0x18], %t6; \
+	st	%t0, [%dst + (offset) + 0x00]; \
+	st	%t1, [%dst + (offset) + 0x04]; \
+	st	%t2, [%dst + (offset) + 0x08]; \
+	st	%t3, [%dst + (offset) + 0x0c]; \
+	st	%t4, [%dst + (offset) + 0x10]; \
+	st	%t5, [%dst + (offset) + 0x14]; \
+	st	%t6, [%dst + (offset) + 0x18]; \
+	st	%t7, [%dst + (offset) + 0x1c];
+
+#define MOVE_BIGALIGNCHUNK(src, dst, offset, t0, t1, t2, t3, t4, t5, t6, t7) \
+	ldd	[%src + (offset) + 0x00], %t0; \
+	ldd	[%src + (offset) + 0x08], %t2; \
+	ldd	[%src + (offset) + 0x10], %t4; \
+	ldd	[%src + (offset) + 0x18], %t6; \
+	std	%t0, [%dst + (offset) + 0x00]; \
+	std	%t2, [%dst + (offset) + 0x08]; \
+	std	%t4, [%dst + (offset) + 0x10]; \
+	std	%t6, [%dst + (offset) + 0x18];
+
+#define MOVE_LASTCHUNK(src, dst, offset, t0, t1, t2, t3) \
+	ldd	[%src - (offset) - 0x10], %t0; \
+	ldd	[%src - (offset) - 0x08], %t2; \
+	st	%t0, [%dst - (offset) - 0x10]; \
+	st	%t1, [%dst - (offset) - 0x0c]; \
+	st	%t2, [%dst - (offset) - 0x08]; \
+	st	%t3, [%dst - (offset) - 0x04];
+
+#define MOVE_LASTALIGNCHUNK(src, dst, offset, t0, t1, t2, t3) \
+	ldd	[%src - (offset) - 0x10], %t0; \
+	ldd	[%src - (offset) - 0x08], %t2; \
+	std	%t0, [%dst - (offset) - 0x10]; \
+	std	%t2, [%dst - (offset) - 0x08];
+
+#define MOVE_SHORTCHUNK(src, dst, offset, t0, t1) \
+	ldub	[%src - (offset) - 0x02], %t0; \
+	ldub	[%src - (offset) - 0x01], %t1; \
+	stb	%t0, [%dst - (offset) - 0x02]; \
+	stb	%t1, [%dst - (offset) - 0x01];
 
 /* Both these macros have to start with exactly the same insn */
-#define RMOVE_BIGCHUNK(src, dst, offset, t0, t1, t2, t3, t4, t5, t6, t7) 				\
-	ldd	[%src - offset - 0x20], %t0; 								\
-	ldd	[%src - offset - 0x18], %t2; 								\
-	ldd	[%src - offset - 0x10], %t4; 								\
-	ldd	[%src - offset - 0x08], %t6; 								\
-	st	%t0, [%dst - offset - 0x20]; 								\
-	st	%t1, [%dst - offset - 0x1c]; 								\
-	st	%t2, [%dst - offset - 0x18]; 								\
-	st	%t3, [%dst - offset - 0x14]; 								\
-	st	%t4, [%dst - offset - 0x10]; 								\
-	st	%t5, [%dst - offset - 0x0c]; 								\
-	st	%t6, [%dst - offset - 0x08]; 								\
-	st	%t7, [%dst - offset - 0x04];
-
-#define RMOVE_BIGALIGNCHUNK(src, dst, offset, t0, t1, t2, t3, t4, t5, t6, t7) 				\
-	ldd	[%src - offset - 0x20], %t0; 								\
-	ldd	[%src - offset - 0x18], %t2; 								\
-	ldd	[%src - offset - 0x10], %t4; 								\
-	ldd	[%src - offset - 0x08], %t6; 								\
-	std	%t0, [%dst - offset - 0x20]; 								\
-	std	%t2, [%dst - offset - 0x18]; 								\
-	std	%t4, [%dst - offset - 0x10]; 								\
-	std	%t6, [%dst - offset - 0x08];
-
-#define RMOVE_LASTCHUNK(src, dst, offset, t0, t1, t2, t3) 						\
-	ldd	[%src + offset + 0x00], %t0; 								\
-	ldd	[%src + offset + 0x08], %t2; 								\
-	st	%t0, [%dst + offset + 0x00]; 								\
-	st	%t1, [%dst + offset + 0x04]; 								\
-	st	%t2, [%dst + offset + 0x08]; 								\
-	st	%t3, [%dst + offset + 0x0c];
-
-#define RMOVE_SHORTCHUNK(src, dst, offset, t0, t1) 							\
-	ldub	[%src + offset + 0x00], %t0; 								\
-	ldub	[%src + offset + 0x01], %t1; 								\
-	stb	%t0, [%dst + offset + 0x00]; 								\
-	stb	%t1, [%dst + offset + 0x01];
-
-#define SMOVE_CHUNK(src, dst, offset, t0, t1, t2, t3, t4, t5, t6, prev, shil, shir, offset2) 		\
-	ldd	[%src + offset + 0x00], %t0; 								\
-	ldd	[%src + offset + 0x08], %t2; 								\
-	srl	%t0, shir, %t5; 									\
-	srl	%t1, shir, %t6; 									\
-	sll	%t0, shil, %t0; 									\
-	or	%t5, %prev, %t5; 									\
-	sll	%t1, shil, %prev; 									\
-	or	%t6, %t0, %t0; 										\
-	srl	%t2, shir, %t1; 									\
-	srl	%t3, shir, %t6; 									\
-	sll	%t2, shil, %t2; 									\
-	or	%t1, %prev, %t1; 									\
-	std	%t4, [%dst + offset + offset2 - 0x04]; 							\
-	std	%t0, [%dst + offset + offset2 + 0x04];							\
-	sll	%t3, shil, %prev; 									\
+#define RMOVE_BIGCHUNK(src, dst, offset, t0, t1, t2, t3, t4, t5, t6, t7) \
+	ldd	[%src - (offset) - 0x20], %t0; \
+	ldd	[%src - (offset) - 0x18], %t2; \
+	ldd	[%src - (offset) - 0x10], %t4; \
+	ldd	[%src - (offset) - 0x08], %t6; \
+	st	%t0, [%dst - (offset) - 0x20]; \
+	st	%t1, [%dst - (offset) - 0x1c]; \
+	st	%t2, [%dst - (offset) - 0x18]; \
+	st	%t3, [%dst - (offset) - 0x14]; \
+	st	%t4, [%dst - (offset) - 0x10]; \
+	st	%t5, [%dst - (offset) - 0x0c]; \
+	st	%t6, [%dst - (offset) - 0x08]; \
+	st	%t7, [%dst - (offset) - 0x04];
+
+#define RMOVE_BIGALIGNCHUNK(src, dst, offset, t0, t1, t2, t3, t4, t5, t6, t7) \
+	ldd	[%src - (offset) - 0x20], %t0; \
+	ldd	[%src - (offset) - 0x18], %t2; \
+	ldd	[%src - (offset) - 0x10], %t4; \
+	ldd	[%src - (offset) - 0x08], %t6; \
+	std	%t0, [%dst - (offset) - 0x20]; \
+	std	%t2, [%dst - (offset) - 0x18]; \
+	std	%t4, [%dst - (offset) - 0x10]; \
+	std	%t6, [%dst - (offset) - 0x08];
+
+#define RMOVE_LASTCHUNK(src, dst, offset, t0, t1, t2, t3) \
+	ldd	[%src + (offset) + 0x00], %t0; \
+	ldd	[%src + (offset) + 0x08], %t2; \
+	st	%t0, [%dst + (offset) + 0x00]; \
+	st	%t1, [%dst + (offset) + 0x04]; \
+	st	%t2, [%dst + (offset) + 0x08]; \
+	st	%t3, [%dst + (offset) + 0x0c];
+
+#define RMOVE_SHORTCHUNK(src, dst, offset, t0, t1) \
+	ldub	[%src + (offset) + 0x00], %t0; \
+	ldub	[%src + (offset) + 0x01], %t1; \
+	stb	%t0, [%dst + (offset) + 0x00]; \
+	stb	%t1, [%dst + (offset) + 0x01];
+
+#define SMOVE_CHUNK(src, dst, offset, t0, t1, t2, t3, t4, t5, t6, prev, shil, shir, offset2) \
+	ldd	[%src + (offset) + 0x00], %t0; \
+	ldd	[%src + (offset) + 0x08], %t2; \
+	srl	%t0, shir, %t5; \
+	srl	%t1, shir, %t6; \
+	sll	%t0, shil, %t0; \
+	or	%t5, %prev, %t5; \
+	sll	%t1, shil, %prev; \
+	or	%t6, %t0, %t0; \
+	srl	%t2, shir, %t1; \
+	srl	%t3, shir, %t6; \
+	sll	%t2, shil, %t2; \
+	or	%t1, %prev, %t1; \
+	std	%t4, [%dst + (offset) + (offset2) - 0x04]; \
+	std	%t0, [%dst + (offset) + (offset2) + 0x04]; \
+	sll	%t3, shil, %prev; \
 	or	%t6, %t2, %t4;
 
-#define SMOVE_ALIGNCHUNK(src, dst, offset, t0, t1, t2, t3, t4, t5, t6, prev, shil, shir, offset2) 	\
-	ldd	[%src + offset + 0x00], %t0; 								\
-	ldd	[%src + offset + 0x08], %t2; 								\
-	srl	%t0, shir, %t4; 									\
-	srl	%t1, shir, %t5; 									\
-	sll	%t0, shil, %t6; 									\
-	or	%t4, %prev, %t0; 									\
-	sll	%t1, shil, %prev; 									\
-	or	%t5, %t6, %t1; 										\
-	srl	%t2, shir, %t4; 									\
-	srl	%t3, shir, %t5; 									\
-	sll	%t2, shil, %t6; 									\
-	or	%t4, %prev, %t2; 									\
-	sll	%t3, shil, %prev; 									\
-	or	%t5, %t6, %t3;										\
-	std	%t0, [%dst + offset + offset2 + 0x00]; 							\
-	std	%t2, [%dst + offset + offset2 + 0x08];
+#define SMOVE_ALIGNCHUNK(src, dst, offset, t0, t1, t2, t3, t4, t5, t6, prev, shil, shir, offset2) \
+	ldd	[%src + (offset) + 0x00], %t0; \
+	ldd	[%src + (offset) + 0x08], %t2; \
+	srl	%t0, shir, %t4;	\
+	srl	%t1, shir, %t5;	\
+	sll	%t0, shil, %t6;	\
+	or	%t4, %prev, %t0; \
+	sll	%t1, shil, %prev; \
+	or	%t5, %t6, %t1; \
+	srl	%t2, shir, %t4;	\
+	srl	%t3, shir, %t5;	\
+	sll	%t2, shil, %t6; \
+	or	%t4, %prev, %t2; \
+	sll	%t3, shil, %prev; \
+	or	%t5, %t6, %t3; \
+	std	%t0, [%dst + (offset) + (offset2) + 0x00]; \
+	std	%t2, [%dst + (offset) + (offset2) + 0x08];
 
 	.text
 	.align	4

^ permalink raw reply	[flat|nested] 55+ messages in thread

* [sparc32] [13/13] ignore undefined symbols with 3 or more leading underscores
  2004-08-05  5:01                       ` [sparc32] [12/13] gcc-3.3 macro parenthesization fix for memcpy.S William Lee Irwin III
@ 2004-08-05  5:31                         ` William Lee Irwin III
  2004-08-05  7:28                         ` [sparc32] [12/13] gcc-3.3 macro parenthesization fix for memcpy.S Jakub Jelinek
  1 sibling, 0 replies; 55+ messages in thread
From: William Lee Irwin III @ 2004-08-05  5:31 UTC (permalink / raw)
  To: Andrew Morton, linux-kernel

On Wed, Aug 04, 2004 at 10:01:41PM -0700, William Lee Irwin III wrote:
> From: Art Haas <ahaas@airmail.net>
> The 1.3->1.4 changes to the arch/sparc/lib/copy_user.S file added
> parenthesis to a number of macros within that file. The BK changlog
> associated with this change indicate the change was to make the
> file work with gcc-3.3.

***** this touches core files ******

All of the BTFIXUP-related symbols are prefixed with at least three
underscores. In order not to trip this error, sparc32 needs to have
some kind of hook around this phase of linking. So here is one method.

****** this may not be the best patch possible *******

Index: mm2-2.6.8-rc2/Makefile
===================================================================
--- mm2-2.6.8-rc2.orig/Makefile
+++ mm2-2.6.8-rc2/Makefile
@@ -538,7 +538,8 @@
 	$(if $($(quiet)cmd_vmlinux__),					\
 	  echo '  $($(quiet)cmd_vmlinux__)' &&) 			\
 	$(cmd_vmlinux__);						\
-	if $(OBJDUMP) --syms $@ | egrep -q '^([^R]|R[^E]|RE[^G])[^w]*\*UND\*'; then	\
+	if $(OBJDUMP) --syms $@ | $(AWK) '$$4!~/^___.*/ { print $$0 }'	\
+		| egrep -q '^([^R]|R[^E]|RE[^G])[^w]*\*UND\*'; then	\
 		echo 'ldchk: $@: final image has undefined symbols:';	\
 		$(NM) $@ | sed 's/^ *U \(.*\)/  \1/p;d';		\
 		$(RM) -f $@;						\

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [sparc32] [12/13] gcc-3.3 macro parenthesization fix for memcpy.S
  2004-08-05  5:01                       ` [sparc32] [12/13] gcc-3.3 macro parenthesization fix for memcpy.S William Lee Irwin III
  2004-08-05  5:31                         ` [sparc32] [13/13] ignore undefined symbols with 3 or more leading underscores William Lee Irwin III
@ 2004-08-05  7:28                         ` Jakub Jelinek
  2004-08-05  7:38                           ` William Lee Irwin III
  1 sibling, 1 reply; 55+ messages in thread
From: Jakub Jelinek @ 2004-08-05  7:28 UTC (permalink / raw)
  To: William Lee Irwin III, Andrew Morton, linux-kernel

On Wed, Aug 04, 2004 at 10:01:41PM -0700, William Lee Irwin III wrote:
> On Wed, Aug 04, 2004 at 09:56:43PM -0700, William Lee Irwin III wrote:
> > SMP support is in need of a great deal of work to port it from 2.2 and
> > 2.4. Add a dependency on BROKEN in the Kconfig to warn the unwary.
> 
> From: Art Haas <ahaas@airmail.net>
> 
> The 1.3->1.4 changes to the arch/sparc/lib/copy_user.S file added
> parenthesis to a number of macros within that file. The BK changlog
> associated with this change indicate the change was to make the
> file work with gcc-3.3.
> 
> When looking at the changes made, I see that similar macros exist in
> memcpy.S as well, so would a patch adding parens to that file be
> worthwhile? Also, just what was the problem with gcc-3.3 that was
> resolved by adding the parenthesis? Macro mis-expansion I'm guessing.

The problem was an (already fixed) gas bug, which for a short time treated
%reg - -0x02
as if there was a -- operator in between.
arch/arch/lib/memcpy.S never passes -0xNN offsets to any of these macros,
so the parenthesis is unnecessary there IMHO.

	Jakub

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [sparc32] [12/13] gcc-3.3 macro parenthesization fix for memcpy.S
  2004-08-05  7:28                         ` [sparc32] [12/13] gcc-3.3 macro parenthesization fix for memcpy.S Jakub Jelinek
@ 2004-08-05  7:38                           ` William Lee Irwin III
  0 siblings, 0 replies; 55+ messages in thread
From: William Lee Irwin III @ 2004-08-05  7:38 UTC (permalink / raw)
  To: Jakub Jelinek; +Cc: Andrew Morton, linux-kernel

On Wed, Aug 04, 2004 at 10:01:41PM -0700, William Lee Irwin III wrote:
>> From: Art Haas <ahaas@airmail.net>
>> The 1.3->1.4 changes to the arch/sparc/lib/copy_user.S file added
>> parenthesis to a number of macros within that file. The BK changlog
>> associated with this change indicate the change was to make the
>> file work with gcc-3.3.
>> When looking at the changes made, I see that similar macros exist in
>> memcpy.S as well, so would a patch adding parens to that file be
>> worthwhile? Also, just what was the problem with gcc-3.3 that was
>> resolved by adding the parenthesis? Macro mis-expansion I'm guessing.

On Thu, Aug 05, 2004 at 03:28:38AM -0400, Jakub Jelinek wrote:
> The problem was an (already fixed) gas bug, which for a short time treated
> %reg - -0x02
> as if there was a -- operator in between.
> arch/arch/lib/memcpy.S never passes -0xNN offsets to any of these macros,
> so the parenthesis is unnecessary there IMHO.

I'd be inclined to take it anyway, as macros should generally
parenthesize their arguments, though it's good to know what specific
toolchain issue the copy_user.S change was meant to deal with.

Thanks.

-- wli

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-05  2:53                 ` 2.6.8-rc2-mm2 Con Kolivas
@ 2004-08-05  8:34                   ` Helge Hafting
  2004-08-05  9:34                     ` 2.6.8-rc2-mm2 Con Kolivas
  2004-08-05 10:47                   ` 2.6.8-rc2-mm2 Ingo Molnar
  1 sibling, 1 reply; 55+ messages in thread
From: Helge Hafting @ 2004-08-05  8:34 UTC (permalink / raw)
  To: Con Kolivas; +Cc: linux-kernel

Con Kolivas wrote:

> Ingo Molnar writes:
>
>>
>> * Con Kolivas <kernel@kolivas.org> wrote:
>>
>>>
>>> Can you define them please? I haven't had any reported to me.
>>
>>
>> sure: take a process that uses 85% of CPU time (and sleeps 15% of the
>> time) if running on an idle system. Start just two of these hogs at
>> normal priority. 2.6.8-rc2-mm2 becomes almost instantly unusable even
>> over a text console: a single 'top' refresh takes ages, 'ls' displays
>> one line per second or so. Start more of these and the system
>> effectively locks up.
>
>
> It's only if I physically try and create such a test application that 
> I can reproduce it. I haven't found any real world load that does that 
> - but of course that doesn't mean I should discount it. However, 
> interactive mode off doesn't exhibit it and it should be easy enough 
> to fix for interactive mode on. Thanks for pointing it out.

I can easily imagine this sort of real-life application.  Anything that 
generate real-time data, such as sound or video for immediate playback 
will use some continous fraction of cpu, depending on how much data and 
how fast the cpu happens to be.   A scheduler with such
a problem will now and then cause trouble when some processor needs just the
"wrong" percentage of its capacity to run the task(s). 
Consider someone playing several video files until he exceeds the 
capacity of the machine. Video skipping frames is then ok, a frozen UI 
is not.  Or consider a multiuser machine running several games.  Or even 
a parallell kernel compile when the source isn't cached. The compiler(s) 
will work for a while, wait for disk for a while, work for a while . . .

2.6.8-rc2-mm2 seems to work fine for me right now, but I hope there will 
be solutions for this sort of problem.

Helge Hafting



^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-05  8:34                   ` 2.6.8-rc2-mm2 Helge Hafting
@ 2004-08-05  9:34                     ` Con Kolivas
  0 siblings, 0 replies; 55+ messages in thread
From: Con Kolivas @ 2004-08-05  9:34 UTC (permalink / raw)
  To: Helge Hafting; +Cc: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 2813 bytes --]

Helge Hafting wrote:
> Con Kolivas wrote:
> 
>> Ingo Molnar writes:
>>
>>>
>>> * Con Kolivas <kernel@kolivas.org> wrote:
>>>
>>>>
>>>> Can you define them please? I haven't had any reported to me.
>>>
>>>
>>>
>>> sure: take a process that uses 85% of CPU time (and sleeps 15% of the
>>> time) if running on an idle system. Start just two of these hogs at
>>> normal priority. 2.6.8-rc2-mm2 becomes almost instantly unusable even
>>> over a text console: a single 'top' refresh takes ages, 'ls' displays
>>> one line per second or so. Start more of these and the system
>>> effectively locks up.
>>
>>
>>
>> It's only if I physically try and create such a test application that 
>> I can reproduce it. I haven't found any real world load that does that 
>> - but of course that doesn't mean I should discount it. However, 
>> interactive mode off doesn't exhibit it and it should be easy enough 
>> to fix for interactive mode on. Thanks for pointing it out.
> 
> 
> I can easily imagine this sort of real-life application.  Anything that 
> generate real-time data, such as sound or video for immediate playback 
> will use some continous fraction of cpu, depending on how much data and 
> how fast the cpu happens to be.   A scheduler with such
> a problem will now and then cause trouble when some processor needs just 
> the
> "wrong" percentage of its capacity to run the task(s). Consider someone 
> playing several video files until he exceeds the capacity of the 
> machine. Video skipping frames is then ok, a frozen UI is not.  Or 
> consider a multiuser machine running several games.  Or even a parallell 
> kernel compile when the source isn't cached. The compiler(s) will work 
> for a while, wait for disk for a while, work for a while . . .

Your concerns are valid, and are relevant for _any_ scheduler design. 
However none of these occur with staircase. Ingo is describing a special 
case where it runs for more than 1ms and less than 10ms. Most things do 
not run exactly in this manner, which is why you haven't seen it, and 
neither have I till I created his test case.

As for the multiuser machine, this is actually an area where staircase 
_excels_ at when put into non-interactive mode. The fact that 
interactivity is not as good in interactive mode under load in a single 
desktop mode doesn't really describe that interactivity is still 
remarkably good considering how strict the cpu distribution is - and 
that's by design. I have now a couple of users using staircase in 
non-interactive mode sharing resources between up to 10 users happily, 
where previously the mainline 2.6 kernel was unable to do this in a fair 
manner.

> 2.6.8-rc2-mm2 seems to work fine for me right now, but I hope there will 
> be solutions for this sort of problem.

Great.

> Helge Hafting

Cheers,
Con

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 256 bytes --]

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-05  2:53                 ` 2.6.8-rc2-mm2 Con Kolivas
  2004-08-05  8:34                   ` 2.6.8-rc2-mm2 Helge Hafting
@ 2004-08-05 10:47                   ` Ingo Molnar
  1 sibling, 0 replies; 55+ messages in thread
From: Ingo Molnar @ 2004-08-05 10:47 UTC (permalink / raw)
  To: Con Kolivas; +Cc: Nick Piggin, Andrew Morton, linux-kernel


* Con Kolivas <kernel@kolivas.org> wrote:

> >sure: take a process that uses 85% of CPU time (and sleeps 15% of the
> >time) if running on an idle system. Start just two of these hogs at
> >normal priority. 2.6.8-rc2-mm2 becomes almost instantly unusable even
> >over a text console: a single 'top' refresh takes ages, 'ls' displays
> >one line per second or so. Start more of these and the system
> >effectively locks up.
> 
> It's only if I physically try and create such a test application that
> I can reproduce it. I haven't found any real world load that does that
> - but of course that doesn't mean I should discount it. However,
> interactive mode off doesn't exhibit it and it should be easy enough
> to fix for interactive mode on. Thanks for pointing it out.

cool. Will be curious how it will look like once staircase-sched gets
its time-shared slot in -mm next time around :-) But in general i'm
quite positive about the staircase scheduler.

	Ingo

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-02 12:10 ` 2.6.8-rc2-mm2 Rik van Riel
@ 2004-08-05 10:56   ` Hideo AOKI
  2004-08-05 12:55     ` 2.6.8-rc2-mm2 Hideo AOKI
  0 siblings, 1 reply; 55+ messages in thread
From: Hideo AOKI @ 2004-08-05 10:56 UTC (permalink / raw)
  To: Rik van Riel; +Cc: Andrew Morton, linux-kernel

Hi, 

Rik van Riel wrote:

> I would really appreciate any testing results on this, both good
> and bad.  I want to get this thing tuned and into a generally good
> shape for use by everybody upstream.
> 
> I'm especially interested in how this affects compute servers,
> desktops and heavily overloaded network servers (the "spamassassin
> slowed my system to a crawl" symptom would be one to test ;)).
> 
> I suspect the patch may need some tweaking to help interactivity
> in some cases, but maybe it'll already work magically by itself...

To evaluate your patch, I tested -mm kernels for thrashing generated
by our benchmark suit.

In 2.6.8-rc2-mm2, performance of application increased, and overhead
of kernel decreased.


** Overview of workload

 Benchmark program creates disk I/O processes and shared memory access
 processes. Generating disk I/O and shared memory access at the same
 time.



** Detailed environment of performance evaluation

 - Hardware
   CPU: Xeon 1.6GHz * 4
   Memory: 2GB
   HDD: IDE ATA100 

 - The benchmark suit 
   The benchmark suit is the wblg-disk, which I have released on
   SourceForge.

   <http://sourceforge.net/project/showfiles.php?group_id=110454&package_id=119281> 
   # I used alpha version (1.0.3-alpha) in this test.
   # I will release 1.0.3 soon.

 - configuration of benchmark
   1. disk IO workload
     + number of process: 4 processes
     + read/write ratio: read 0% / write 100%
     + file IO size: 1KB - 256KB (random) 

   2. memory access workload
     + number of process: 32 processes
     + Shard memory regions: 512MB * 4 
     + Each process accesses one shared memory region.
       (8 processes share one shared memory region.)
     + Each process repeats 4 byte memory access each 4KB.

   Measurement time: 1 hour
   Measurement items: write throughput

 - Other configurations
   Using Oprofile 
   Issue vmstat command each 1 minute



** Results of performance evaluation

* result of benchmark
                        write throughput [MB/s]
        2.6.8-rc2-mm1:  2.39
        2.6.8-rc2-mm2:  2.68


* result of vmstat
                        swap in(kB/s)   swap out(kB/s)
        2.6.8-rc2-mm1:  0 - 641         0 - 583         
        2.6.8-rc2-mm2:  0 - 727         0 - 684         


* results of Oprofile

  - System profiling (top 2)

    Overhead of kernel decreased by 3.9%.

    2.6.8-rc2-mm1:
        No.     samples         %               
        1.      170981153       77.6102 wblg-disk_client
        2.       46808551       21.2469 vmlinux-2.6.8-rc2-mm1

    2.6.8-rc2-mm2:
        No.     samples         %               
        1.      179798682       81.6102 wblg-disk_client
        2.       38141112       17.3122 vmlinux-2.6.8-rc2-mm2


  - Kernel profiling (top 10) 

    Ratio of page_referenced_one() and kmap_atomic() decreased.

    2.6.8-rc2-mm1:
        No.     samples         %       symbol name
        1       11398599        24.3515 page_referenced_one
        2        5652276        12.0753 kmap_atomic
        3        2257662         4.8232 sysenter_past_esp
        4        2098275         4.4827 flush_tlb_others
        5        1467288         3.1347 __copy_to_user_ll
        6        1167740         2.4947 page_address
        7        1145108         2.4464 page_fault
        8         946909         2.0229 flush_tlb_page
        9         889151         1.8995 do_gettimeofday
        10        828174         1.7693 refill_inactive_zone

    2.6.8-rc2-mm2:
        No.     samples         %       symbol name
        1        6057840        15.8827 page_referenced_one
        2        3707571         9.7207 kmap_atomic
        3        2531840         6.6381 sysenter_past_esp
        4        1707017         4.4755 __copy_to_user_ll
        5        1328610         3.4834 flush_tlb_others
        6        1233726         3.2346 page_fault
        7        1140917         2.9913 do_gettimeofday
        8         970534         2.5446 get_offset_tsc
        9         759579         1.9915 mark_offset_tsc
        10        650208         1.7047 page_address


Best regards,
Hideo AOKI

Systems Development Laboratory, Hitachi, Ltd.


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: 2.6.8-rc2-mm2
  2004-08-05 10:56   ` 2.6.8-rc2-mm2 Hideo AOKI
@ 2004-08-05 12:55     ` Hideo AOKI
  0 siblings, 0 replies; 55+ messages in thread
From: Hideo AOKI @ 2004-08-05 12:55 UTC (permalink / raw)
  To: Rik van Riel; +Cc: Andrew Morton, linux-kernel

I also tested --mm kernels for no thrashing situation by our benchmark
suit.

In 2.6.8-rc2-mm2, overhead of page_refernced_one() decreases in shared
memory access. Additionally, it seems that token based thrashing
control patch has not bad effect in no thrashing situation.


** Overview of workload

Benchmark program creates workload processes that alternate disk IO
with shared memory access.



** Detailed environment of performance evaluation

 - Hardware
   CPU: Xeon 1.6GHz * 4
   Memory: 4GB
   HDD: IDE ATA100 

 - The benchmark suit
   The benchmark suit is the wblg-disk 1.0.2, which I have released on
   SourceForge. You can get from following URL.


   <http://sourceforge.net/project/showfiles.php?group_id=110454&package_id=119281>. 

 - Configuration of benchmark suit
   + number of workload process: 640 processes
   + read/write ratio: read 0% / write 100%
   + file IO size: 1KB - 256KB (random) 

   + Shard memory regions: 1.6GB * 1 
     All workload processes share one shared memory region.
   + Each process repeats 4 byte memory access each 4KB.

   Measurement time: 3 hour
   Measurement items: write throughput

 - Other configurations
   Using Oprofile 
   Issue vmstat command each 1 minute


** Results of performance evaluation

* result of benchmark
                        write throughput [MB/s]
        2.6.8-rc2-mm1:  2.08
        2.6.8-rc2-mm2:  2.10

* result of vmstat
                        swap in (min-max)(kB/s) swap out (min-max)(kB/s)
        2.6.8-rc2-mm1:  0 - 9                   0 - 9         
        2.6.8-rc2-mm2:  0 - 1                   0 - 1         

* Results of Oprofile

  - system profiling (top 2)

    2.6.8-rc2-mm1:
        No.     samples         %               
        1       252096016       81.1833 wblg-disk_client
        2        55708450       17.94   vmlinux-2.6.8-rc2-mm1

    2.6.8-rc2-mm2:
        No.     samples         %
        1       180452715       84.9684 wblg-disk_client
        2        29715808       13.9921 vmlinux-2.6.8-rc2-mm2

  - kernel profiling (top 10) 

    Ratio of page_referenced_one() and kmap_atomic() decreased. Ratio
    of copy_page_range(), page_fault(), and refill_inactive_zone()
    increased.

    2.6.8-rc2-mm1:
        No.     samples         %       symbol name
        1       24952210        44.7907 page_referenced_one
        2        6924133        12.4292 kmap_atomic
        3        2751806         4.9397 flush_tlb_page
        4        1466868         2.6331 copy_page_range
        5        1362218         2.4453 try_atomic_semop
        6        1042919         1.8721 mark_offset_tsc
        7         820792         1.4734 page_fault
        8         633105         1.1365 vma_prio_tree_next
        9         586925         1.0536 update_queue
        10        576520         1.0349 __copy_from_user_ll

    2.6.8-rc2-mm2:
        No.     samples         %       symbol name
        1       10778546        36.2721 page_referenced_one
        2        2821678         9.4955 kmap_atomic
        3        1526580         5.1373 copy_page_range
        4        1400807         4.714  flush_tlb_page
        5         753029         2.5341 mark_offset_tsc
        6         724207         2.4371 page_fault
        7         461152         1.5519 refill_inactive_zone
        8         436286         1.4682 __copy_from_user_ll
        9         395080         1.3295 ext3_find_entry
        10        341127         1.148  apic_timer_interrupt

Best regards,
Hideo AOKI

Systems Development Laboratory, Hitachi, Ltd.



^ permalink raw reply	[flat|nested] 55+ messages in thread

end of thread, other threads:[~2004-08-05 13:00 UTC | newest]

Thread overview: 55+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-08-02  8:55 2.6.8-rc2-mm2 Andrew Morton
2004-08-02  9:23 ` 2.6.8-rc2-mm2 Espen Fjellvær Olsen
2004-08-02 12:10 ` 2.6.8-rc2-mm2 Rik van Riel
2004-08-05 10:56   ` 2.6.8-rc2-mm2 Hideo AOKI
2004-08-05 12:55     ` 2.6.8-rc2-mm2 Hideo AOKI
2004-08-02 13:07 ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-03  6:43   ` 2.6.8-rc2-mm2 Nick Piggin
2004-08-03  7:35     ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-03  7:43       ` 2.6.8-rc2-mm2 Nick Piggin
2004-08-03  7:45       ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-04  8:35         ` 2.6.8-rc2-mm2 Nick Piggin
2004-08-04 10:12           ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-04 10:33             ` 2.6.8-rc2-mm2 Nick Piggin
2004-08-04 11:42               ` 2.6.8-rc2-mm2 bert hubert
2004-08-05  1:21                 ` 2.6.8-rc2-mm2 Nick Piggin
2004-08-04 10:31           ` 2.6.8-rc2-mm2 Ingo Molnar
2004-08-04 10:46             ` 2.6.8-rc2-mm2 Nick Piggin
2004-08-04 10:47             ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-04 12:45               ` 2.6.8-rc2-mm2 Ingo Molnar
2004-08-05  2:53                 ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-05  8:34                   ` 2.6.8-rc2-mm2 Helge Hafting
2004-08-05  9:34                     ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-05 10:47                   ` 2.6.8-rc2-mm2 Ingo Molnar
2004-08-02 13:52 ` 2.6.8-rc2-mm2 William Lee Irwin III
2004-08-02 16:12   ` 2.6.8-rc2-mm2 William Lee Irwin III
2004-08-02 14:28 ` 2.6.8-rc2-mm2 William Lee Irwin III
2004-08-02 15:31 ` 2.6.8-rc2-mm2 Mark Watts
2004-08-02 15:33   ` 2.6.8-rc2-mm2 Jesper Juhl
2004-08-02 15:38   ` 2.6.8-rc2-mm2 Dominik Karall
2004-08-02 16:02     ` 2.6.8-rc2-mm2 Mark Watts
2004-08-03  6:55   ` 2.6.8-rc2-mm2 Clemens Schwaighofer
2004-08-02 15:57 ` 2.6.8-rc2-mm2 Martin Zwickel
2004-08-02 17:59 ` 2.6.8-rc2-mm2 (compile stats) John Cherry
2004-08-02 18:15 ` 2.6.8-rc2-mm2 Peter Osterlund
2004-08-02 22:16 ` [patch] 2.6.8-rc2-mm2: compile error with SWAP=n Adrian Bunk
2004-08-03  8:27 ` 2.6.8-rc2-mm2 Mark Watts
2004-08-03 13:05   ` 2.6.8-rc2-mm2 R. J. Wysocki
2004-08-03 13:13 ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-03 19:44 ` 2.6.8-rc2-mm2 Adrian Bunk
2004-08-04 16:32 ` 2.6.8-rc2-mm2 Dominik Karall
2004-08-05  4:38 ` [sparc32] [1/13] turbosparc flush warnings William Lee Irwin III
2004-08-05  4:39   ` [sparc32] [2/13] sparc32 init_idle() William Lee Irwin III
2004-08-05  4:41     ` [sparc32] [3/13] sun4d cpu_present_map is a cpumask_t William Lee Irwin III
2004-08-05  4:44       ` [sparc32] [4/13] smp_processor_id() BITFIXUP fixes William Lee Irwin III
2004-08-05  4:46         ` [sparc32] [5/13] reinstate smp_reschedule_irq() William Lee Irwin III
2004-08-05  4:47           ` [sparc32] [6/13] remove references to start_secondary() William Lee Irwin III
2004-08-05  4:48             ` [sparc32] [7/13] remove references to num_context_patch2 William Lee Irwin III
2004-08-05  4:49               ` [sparc32] [8/13] define cache_decay_ticks William Lee Irwin III
2004-08-05  4:54                 ` [sparc32] [9/13] remove unused variable in dvma.c William Lee Irwin III
2004-08-05  4:55                   ` [sparc32] [10/13] sun4 does not support SMP William Lee Irwin III
2004-08-05  4:56                     ` [sparc32] [11/13] make CONFIG_SMP depend on CONFIG_BROKEN William Lee Irwin III
2004-08-05  5:01                       ` [sparc32] [12/13] gcc-3.3 macro parenthesization fix for memcpy.S William Lee Irwin III
2004-08-05  5:31                         ` [sparc32] [13/13] ignore undefined symbols with 3 or more leading underscores William Lee Irwin III
2004-08-05  7:28                         ` [sparc32] [12/13] gcc-3.3 macro parenthesization fix for memcpy.S Jakub Jelinek
2004-08-05  7:38                           ` William Lee Irwin III

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.