* Re: [CFT:PATCH] Removing possible wrong asm/serial.h inclusions
@ 2006-08-28 20:05 Mark A. Greer
0 siblings, 0 replies; 14+ messages in thread
From: Mark A. Greer @ 2006-08-28 20:05 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
All,
This was sent to linuxppc-embedded by Russel King. In case you missed it,
I'm forwarding it here:
Mark
--
http://ozlabs.org/pipermail/linuxppc-embedded/2006-August/024178.html
--
asm/serial.h is supposed to contain the definitions for the architecture
specific 8250 ports for the 8250 driver. It may also define BASE_BAUD,
but this is the base baud for the architecture specific ports _only_.
Therefore, nothing other than the 8250 driver should be including this
header file. In order to move towards this goal, here is a patch which
removes some of the more obvious incorrect includes of the file.
MIPS and PPC has rather a lot of stuff in asm/serial.h, some of it looks
related to non-8250 ports. Hence, it's not trivial to conclude that
these includes are indeed unnecessary, so can mips and ppc people please
test this patch carefully.
Thanks.
diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c
--- a/arch/frv/kernel/setup.c
+++ b/arch/frv/kernel/setup.c
@@ -31,7 +31,6 @@
#include <linux/serial_reg.h>
#include <asm/setup.h>
-#include <asm/serial.h>
#include <asm/irq.h>
#include <asm/sections.h>
#include <asm/pgalloc.h>
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -54,7 +54,6 @@
#include <asm/processor.h>
#include <asm/sal.h>
#include <asm/sections.h>
-#include <asm/serial.h>
#include <asm/setup.h>
#include <asm/smp.h>
#include <asm/system.h>
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -23,7 +23,6 @@
#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/gt64120.h>
-#include <asm/serial.h>
#include <asm/mach-cobalt/cobalt.h>
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -34,7 +34,6 @@
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
-#include <asm/serial.h>
#include <asm/lasat/lasat.h>
#include <asm/lasat/serial.h>
diff --git a/arch/powerpc/kernel/setup-common.c
b/arch/powerpc/kernel/setup-common.c
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -51,7 +51,6 @@
#include <asm/system.h>
#include <asm/rtas.h>
#include <asm/iommu.h>
-#include <asm/serial.h>
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
diff --git a/arch/powerpc/kernel/setup_32.c
b/arch/powerpc/kernel/setup_32.c
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -38,7 +38,6 @@
#include <asm/nvram.h>
#include <asm/xmon.h>
#include <asm/time.h>
-#include <asm/serial.h>
#include <asm/udbg.h>
#include "setup.h"
diff --git a/arch/powerpc/kernel/setup_64.c
b/arch/powerpc/kernel/setup_64.c
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -51,7 +51,6 @@
#include <asm/system.h>
#include <asm/rtas.h>
#include <asm/iommu.h>
-#include <asm/serial.h>
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
diff --git a/drivers/char/pcmcia/synclink_cs.c
b/drivers/char/pcmcia/synclink_cs.c
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -57,7 +57,6 @@
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
-#include <asm/serial.h>
#include <linux/delay.h>
#include <linux/ioctl.h>
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -87,7 +87,6 @@
#include <linux/vmalloc.h>
#include <linux/init.h>
-#include <asm/serial.h>
#include <linux/delay.h>
#include <linux/ioctl.h>
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -76,17 +76,16 @@
*/
#define is_real_interrupt(irq) ((irq) != 0)
-#include <asm/serial.h>
+#define BASE_BAUD 115200
/* Standard COM flags */
#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
/*
* SERIAL_PORT_DFNS tells us about built-in ports that have no
* standard enumeration mechanism. Platforms that can find all
* serial ports via mechanisms like ACPI or PCI need not supply it.
*/
-#undef SERIAL_PORT_DFNS
#if defined(CONFIG_PLAT_USRV)
#define SERIAL_PORT_DFNS
\
@@ -109,7 +108,7 @@
#endif /* !CONFIG_PLAT_USRV */
static struct old_serial_port old_serial_port[] = {
- SERIAL_PORT_DFNS /* defined in asm/serial.h */
+ SERIAL_PORT_DFNS
};
#define UART_NR ARRAY_SIZE(old_serial_port)
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core
^ permalink raw reply [flat|nested] 14+ messages in thread* RE: [CFT:PATCH] Removing possible wrong asm/serial.h inclusions
@ 2006-08-28 16:28 ` Luck, Tony
0 siblings, 0 replies; 14+ messages in thread
From: Luck, Tony @ 2006-08-28 16:28 UTC (permalink / raw)
To: Russell King, linux-ia64, linux-mips, linuxppc-embedded, paulkf,
takata, linux-kernel
> diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
Acked-by: Tony Luck <tony.luck@intel.com>
[IA-64 part only ... I didn't look at the rest]
-Tony
^ permalink raw reply [flat|nested] 14+ messages in thread
* RE: [CFT:PATCH] Removing possible wrong asm/serial.h inclusions
@ 2006-08-28 16:28 ` Luck, Tony
0 siblings, 0 replies; 14+ messages in thread
From: Luck, Tony @ 2006-08-28 16:28 UTC (permalink / raw)
To: Russell King, linux-ia64, linux-mips, linuxppc-embedded, paulkf,
takata, linux-kernel
> diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
Acked-by: Tony Luck <tony.luck@intel.com>
[IA-64 part only ... I didn't look at the rest]
-Tony
^ permalink raw reply [flat|nested] 14+ messages in thread
* RE: [CFT:PATCH] Removing possible wrong asm/serial.h inclusions
@ 2006-08-28 16:28 ` Luck, Tony
0 siblings, 0 replies; 14+ messages in thread
From: Luck, Tony @ 2006-08-28 16:28 UTC (permalink / raw)
To: Russell King, linux-ia64, linux-mips, linuxppc-embedded, paulkf,
takata, linux-kernel
> diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
Acked-by: Tony Luck <tony.luck@intel.com>
[IA-64 part only ... I didn't look at the rest]
-Tony
^ permalink raw reply [flat|nested] 14+ messages in thread
* [CFT:PATCH] Removing possible wrong asm/serial.h inclusions
@ 2006-08-28 8:52 ` Russell King
0 siblings, 0 replies; 14+ messages in thread
From: Russell King @ 2006-08-28 8:52 UTC (permalink / raw)
To: linux-ia64, linux-mips, linuxppc-embedded, paulkf, takata, linux-kernel
asm/serial.h is supposed to contain the definitions for the architecture
specific 8250 ports for the 8250 driver. It may also define BASE_BAUD,
but this is the base baud for the architecture specific ports _only_.
Therefore, nothing other than the 8250 driver should be including this
header file. In order to move towards this goal, here is a patch which
removes some of the more obvious incorrect includes of the file.
MIPS and PPC has rather a lot of stuff in asm/serial.h, some of it looks
related to non-8250 ports. Hence, it's not trivial to conclude that
these includes are indeed unnecessary, so can mips and ppc people please
test this patch carefully.
Thanks.
diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c
--- a/arch/frv/kernel/setup.c
+++ b/arch/frv/kernel/setup.c
@@ -31,7 +31,6 @@
#include <linux/serial_reg.h>
#include <asm/setup.h>
-#include <asm/serial.h>
#include <asm/irq.h>
#include <asm/sections.h>
#include <asm/pgalloc.h>
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -54,7 +54,6 @@
#include <asm/processor.h>
#include <asm/sal.h>
#include <asm/sections.h>
-#include <asm/serial.h>
#include <asm/setup.h>
#include <asm/smp.h>
#include <asm/system.h>
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -23,7 +23,6 @@
#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/gt64120.h>
-#include <asm/serial.h>
#include <asm/mach-cobalt/cobalt.h>
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -34,7 +34,6 @@
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
-#include <asm/serial.h>
#include <asm/lasat/lasat.h>
#include <asm/lasat/serial.h>
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -51,7 +51,6 @@
#include <asm/system.h>
#include <asm/rtas.h>
#include <asm/iommu.h>
-#include <asm/serial.h>
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -38,7 +38,6 @@
#include <asm/nvram.h>
#include <asm/xmon.h>
#include <asm/time.h>
-#include <asm/serial.h>
#include <asm/udbg.h>
#include "setup.h"
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -51,7 +51,6 @@
#include <asm/system.h>
#include <asm/rtas.h>
#include <asm/iommu.h>
-#include <asm/serial.h>
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -57,7 +57,6 @@
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
-#include <asm/serial.h>
#include <linux/delay.h>
#include <linux/ioctl.h>
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -87,7 +87,6 @@
#include <linux/vmalloc.h>
#include <linux/init.h>
-#include <asm/serial.h>
#include <linux/delay.h>
#include <linux/ioctl.h>
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -76,17 +76,16 @@
*/
#define is_real_interrupt(irq) ((irq) != 0)
-#include <asm/serial.h>
+#define BASE_BAUD 115200
/* Standard COM flags */
#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
/*
* SERIAL_PORT_DFNS tells us about built-in ports that have no
* standard enumeration mechanism. Platforms that can find all
* serial ports via mechanisms like ACPI or PCI need not supply it.
*/
-#undef SERIAL_PORT_DFNS
#if defined(CONFIG_PLAT_USRV)
#define SERIAL_PORT_DFNS \
@@ -109,7 +108,7 @@
#endif /* !CONFIG_PLAT_USRV */
static struct old_serial_port old_serial_port[] = {
- SERIAL_PORT_DFNS /* defined in asm/serial.h */
+ SERIAL_PORT_DFNS
};
#define UART_NR ARRAY_SIZE(old_serial_port)
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core
^ permalink raw reply [flat|nested] 14+ messages in thread* [CFT:PATCH] Removing possible wrong asm/serial.h inclusions
@ 2006-08-28 8:52 ` Russell King
0 siblings, 0 replies; 14+ messages in thread
From: Russell King @ 2006-08-28 8:52 UTC (permalink / raw)
To: linux-ia64, linux-mips, linuxppc-embedded, paulkf, takata, linux-kernel
asm/serial.h is supposed to contain the definitions for the architecture
specific 8250 ports for the 8250 driver. It may also define BASE_BAUD,
but this is the base baud for the architecture specific ports _only_.
Therefore, nothing other than the 8250 driver should be including this
header file. In order to move towards this goal, here is a patch which
removes some of the more obvious incorrect includes of the file.
MIPS and PPC has rather a lot of stuff in asm/serial.h, some of it looks
related to non-8250 ports. Hence, it's not trivial to conclude that
these includes are indeed unnecessary, so can mips and ppc people please
test this patch carefully.
Thanks.
diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c
--- a/arch/frv/kernel/setup.c
+++ b/arch/frv/kernel/setup.c
@@ -31,7 +31,6 @@
#include <linux/serial_reg.h>
#include <asm/setup.h>
-#include <asm/serial.h>
#include <asm/irq.h>
#include <asm/sections.h>
#include <asm/pgalloc.h>
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -54,7 +54,6 @@
#include <asm/processor.h>
#include <asm/sal.h>
#include <asm/sections.h>
-#include <asm/serial.h>
#include <asm/setup.h>
#include <asm/smp.h>
#include <asm/system.h>
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -23,7 +23,6 @@
#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/gt64120.h>
-#include <asm/serial.h>
#include <asm/mach-cobalt/cobalt.h>
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -34,7 +34,6 @@
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
-#include <asm/serial.h>
#include <asm/lasat/lasat.h>
#include <asm/lasat/serial.h>
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -51,7 +51,6 @@
#include <asm/system.h>
#include <asm/rtas.h>
#include <asm/iommu.h>
-#include <asm/serial.h>
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -38,7 +38,6 @@
#include <asm/nvram.h>
#include <asm/xmon.h>
#include <asm/time.h>
-#include <asm/serial.h>
#include <asm/udbg.h>
#include "setup.h"
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -51,7 +51,6 @@
#include <asm/system.h>
#include <asm/rtas.h>
#include <asm/iommu.h>
-#include <asm/serial.h>
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -57,7 +57,6 @@
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
-#include <asm/serial.h>
#include <linux/delay.h>
#include <linux/ioctl.h>
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -87,7 +87,6 @@
#include <linux/vmalloc.h>
#include <linux/init.h>
-#include <asm/serial.h>
#include <linux/delay.h>
#include <linux/ioctl.h>
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -76,17 +76,16 @@
*/
#define is_real_interrupt(irq) ((irq) != 0)
-#include <asm/serial.h>
+#define BASE_BAUD 115200
/* Standard COM flags */
#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
/*
* SERIAL_PORT_DFNS tells us about built-in ports that have no
* standard enumeration mechanism. Platforms that can find all
* serial ports via mechanisms like ACPI or PCI need not supply it.
*/
-#undef SERIAL_PORT_DFNS
#if defined(CONFIG_PLAT_USRV)
#define SERIAL_PORT_DFNS \
@@ -109,7 +108,7 @@
#endif /* !CONFIG_PLAT_USRV */
static struct old_serial_port old_serial_port[] = {
- SERIAL_PORT_DFNS /* defined in asm/serial.h */
+ SERIAL_PORT_DFNS
};
#define UART_NR ARRAY_SIZE(old_serial_port)
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [CFT:PATCH] Removing possible wrong asm/serial.h inclusions
2006-08-28 8:52 ` Russell King
(?)
@ 2006-08-28 14:42 ` Paul Fulghum
-1 siblings, 0 replies; 14+ messages in thread
From: Paul Fulghum @ 2006-08-28 14:42 UTC (permalink / raw)
To: Russell King; +Cc: linux-kernel
On Mon, 2006-08-28 at 09:52 +0100, Russell King wrote:
> asm/serial.h is supposed to contain the definitions for the architecture
> specific 8250 ports for the 8250 driver. It may also define BASE_BAUD,
> but this is the base baud for the architecture specific ports _only_.
>
> Therefore, nothing other than the 8250 driver should be including this
> header file. In order to move towards this goal, here is a patch which
> removes some of the more obvious incorrect includes of the file.
>
> MIPS and PPC has rather a lot of stuff in asm/serial.h, some of it looks
> related to non-8250 ports. Hence, it's not trivial to conclude that
> these includes are indeed unnecessary, so can mips and ppc people please
> test this patch carefully.
...
> diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
> diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
Acked-by: Paul Fulghum <paulkf@microgate.com>
--
Paul Fulghum
Microgate Systems, Ltd
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [CFT:PATCH] Removing possible wrong asm/serial.h inclusions
2006-08-28 8:52 ` Russell King
@ 2006-08-29 16:17 ` Ralf Baechle
-1 siblings, 0 replies; 14+ messages in thread
From: Ralf Baechle @ 2006-08-29 16:17 UTC (permalink / raw)
To: linux-ia64, linux-mips, linuxppc-embedded, paulkf, takata, linux-kernel
On Mon, Aug 28, 2006 at 09:52:44AM +0100, Russell King wrote:
> asm/serial.h is supposed to contain the definitions for the architecture
> specific 8250 ports for the 8250 driver. It may also define BASE_BAUD,
> but this is the base baud for the architecture specific ports _only_.
>
> Therefore, nothing other than the 8250 driver should be including this
> header file. In order to move towards this goal, here is a patch which
> removes some of the more obvious incorrect includes of the file.
>
> MIPS and PPC has rather a lot of stuff in asm/serial.h, some of it looks
> related to non-8250 ports. Hence, it's not trivial to conclude that
> these includes are indeed unnecessary, so can mips and ppc people please
> test this patch carefully.
The MIPS bits were just unused leftovers from the days when the arch
code did did register serials & consoles. So for the MIPS bits:
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Ralf
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [CFT:PATCH] Removing possible wrong asm/serial.h inclusions
@ 2006-08-29 16:17 ` Ralf Baechle
0 siblings, 0 replies; 14+ messages in thread
From: Ralf Baechle @ 2006-08-29 16:17 UTC (permalink / raw)
To: linux-ia64, linux-mips, linuxppc-embedded, paulkf, takata, linux-kernel
On Mon, Aug 28, 2006 at 09:52:44AM +0100, Russell King wrote:
> asm/serial.h is supposed to contain the definitions for the architecture
> specific 8250 ports for the 8250 driver. It may also define BASE_BAUD,
> but this is the base baud for the architecture specific ports _only_.
>
> Therefore, nothing other than the 8250 driver should be including this
> header file. In order to move towards this goal, here is a patch which
> removes some of the more obvious incorrect includes of the file.
>
> MIPS and PPC has rather a lot of stuff in asm/serial.h, some of it looks
> related to non-8250 ports. Hence, it's not trivial to conclude that
> these includes are indeed unnecessary, so can mips and ppc people please
> test this patch carefully.
The MIPS bits were just unused leftovers from the days when the arch
code did did register serials & consoles. So for the MIPS bits:
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Ralf
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [CFT:PATCH] Removing possible wrong asm/serial.h inclusions
2006-08-28 8:52 ` Russell King
(?)
@ 2006-08-30 9:09 ` David Howells
-1 siblings, 0 replies; 14+ messages in thread
From: David Howells @ 2006-08-30 9:09 UTC (permalink / raw)
To: Russell King
Cc: linux-ia64, linux-mips, linuxppc-embedded, paulkf, takata, linux-kernel
Russell King <rmk+lkml@arm.linux.org.uk> wrote:
> --- a/arch/frv/kernel/setup.c
> +++ b/arch/frv/kernel/setup.c
> @@ -31,7 +31,6 @@
> #include <linux/serial_reg.h>
>
> #include <asm/setup.h>
> -#include <asm/serial.h>
> #include <asm/irq.h>
> #include <asm/sections.h>
> #include <asm/pgalloc.h>
Acked-By: David Howells <dhowells@redhat.com>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [CFT:PATCH] Removing possible wrong asm/serial.h inclusions
@ 2006-08-30 9:09 ` David Howells
0 siblings, 0 replies; 14+ messages in thread
From: David Howells @ 2006-08-30 9:09 UTC (permalink / raw)
To: Russell King
Cc: linux-ia64, linux-mips, linuxppc-embedded, paulkf, takata, linux-kernel
Russell King <rmk+lkml@arm.linux.org.uk> wrote:
> --- a/arch/frv/kernel/setup.c
> +++ b/arch/frv/kernel/setup.c
> @@ -31,7 +31,6 @@
> #include <linux/serial_reg.h>
>
> #include <asm/setup.h>
> -#include <asm/serial.h>
> #include <asm/irq.h>
> #include <asm/sections.h>
> #include <asm/pgalloc.h>
Acked-By: David Howells <dhowells@redhat.com>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [CFT:PATCH] Removing possible wrong asm/serial.h inclusions
@ 2006-08-30 9:09 ` David Howells
0 siblings, 0 replies; 14+ messages in thread
From: David Howells @ 2006-08-30 9:09 UTC (permalink / raw)
To: Russell King
Cc: linux-mips, linux-ia64, takata, linux-kernel, paulkf, linuxppc-embedded
Russell King <rmk+lkml@arm.linux.org.uk> wrote:
> --- a/arch/frv/kernel/setup.c
> +++ b/arch/frv/kernel/setup.c
> @@ -31,7 +31,6 @@
> #include <linux/serial_reg.h>
>
> #include <asm/setup.h>
> -#include <asm/serial.h>
> #include <asm/irq.h>
> #include <asm/sections.h>
> #include <asm/pgalloc.h>
Acked-By: David Howells <dhowells@redhat.com>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [CFT:PATCH] Removing possible wrong asm/serial.h inclusions
2006-08-28 8:52 ` Russell King
@ 2006-08-30 13:03 ` Hirokazu Takata
-1 siblings, 0 replies; 14+ messages in thread
From: Hirokazu Takata @ 2006-08-30 13:03 UTC (permalink / raw)
To: linux-ia64, linux-mips, linuxppc-embedded, paulkf, takata, linux-kernel
From: Russell King <rmk+lkml@arm.linux.org.uk>
Subject: [CFT:PATCH] Removing possible wrong asm/serial.h inclusions
Date: Mon, 28 Aug 2006 09:52:44 +0100
> diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
> --- a/drivers/serial/m32r_sio.c
> +++ b/drivers/serial/m32r_sio.c
> @@ -76,17 +76,16 @@
> */
> #define is_real_interrupt(irq) ((irq) != 0)
>
> -#include <asm/serial.h>
> +#define BASE_BAUD 115200
>
> /* Standard COM flags */
> #define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
>
> /*
> * SERIAL_PORT_DFNS tells us about built-in ports that have no
> * standard enumeration mechanism. Platforms that can find all
> * serial ports via mechanisms like ACPI or PCI need not supply it.
> */
> -#undef SERIAL_PORT_DFNS
> #if defined(CONFIG_PLAT_USRV)
>
> #define SERIAL_PORT_DFNS \
> @@ -109,7 +108,7 @@
> #endif /* !CONFIG_PLAT_USRV */
>
> static struct old_serial_port old_serial_port[] = {
> - SERIAL_PORT_DFNS /* defined in asm/serial.h */
> + SERIAL_PORT_DFNS
> };
>
> #define UART_NR ARRAY_SIZE(old_serial_port)
>
Acked-by: Hirokazu Takata <takata@linux-m32r.org>
Thank you.
-- Takata
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [CFT:PATCH] Removing possible wrong asm/serial.h inclusions
@ 2006-08-30 13:03 ` Hirokazu Takata
0 siblings, 0 replies; 14+ messages in thread
From: Hirokazu Takata @ 2006-08-30 13:03 UTC (permalink / raw)
To: linux-ia64, linux-mips, linuxppc-embedded, paulkf, takata, linux-kernel
From: Russell King <rmk+lkml@arm.linux.org.uk>
Subject: [CFT:PATCH] Removing possible wrong asm/serial.h inclusions
Date: Mon, 28 Aug 2006 09:52:44 +0100
> diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
> --- a/drivers/serial/m32r_sio.c
> +++ b/drivers/serial/m32r_sio.c
> @@ -76,17 +76,16 @@
> */
> #define is_real_interrupt(irq) ((irq) != 0)
>
> -#include <asm/serial.h>
> +#define BASE_BAUD 115200
>
> /* Standard COM flags */
> #define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
>
> /*
> * SERIAL_PORT_DFNS tells us about built-in ports that have no
> * standard enumeration mechanism. Platforms that can find all
> * serial ports via mechanisms like ACPI or PCI need not supply it.
> */
> -#undef SERIAL_PORT_DFNS
> #if defined(CONFIG_PLAT_USRV)
>
> #define SERIAL_PORT_DFNS \
> @@ -109,7 +108,7 @@
> #endif /* !CONFIG_PLAT_USRV */
>
> static struct old_serial_port old_serial_port[] = {
> - SERIAL_PORT_DFNS /* defined in asm/serial.h */
> + SERIAL_PORT_DFNS
> };
>
> #define UART_NR ARRAY_SIZE(old_serial_port)
>
Acked-by: Hirokazu Takata <takata@linux-m32r.org>
Thank you.
-- Takata
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2006-08-30 13:03 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-08-28 20:05 [CFT:PATCH] Removing possible wrong asm/serial.h inclusions Mark A. Greer
-- strict thread matches above, loose matches on Subject: below --
2006-08-28 16:28 Luck, Tony
2006-08-28 16:28 ` Luck, Tony
2006-08-28 16:28 ` Luck, Tony
2006-08-28 8:52 Russell King
2006-08-28 8:52 ` Russell King
2006-08-28 14:42 ` Paul Fulghum
2006-08-29 16:17 ` Ralf Baechle
2006-08-29 16:17 ` Ralf Baechle
2006-08-30 9:09 ` David Howells
2006-08-30 9:09 ` David Howells
2006-08-30 9:09 ` David Howells
2006-08-30 13:03 ` Hirokazu Takata
2006-08-30 13:03 ` Hirokazu Takata
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.