* [Bug 7866] cpufreq fails to correctly identify Intel Conroe operating frequencies
@ 2007-02-07 13:57 bugme-daemon
0 siblings, 0 replies; 8+ messages in thread
From: bugme-daemon @ 2007-02-07 13:57 UTC (permalink / raw)
To: cpufreq
http://bugzilla.kernel.org/show_bug.cgi?id=7866
------- Additional Comments From jared@jaredcam.net 2007-02-07 05:48 -------
The FSB is currently overclocked, I think I have it set at 350 or so. However,
I was still having this problem before I overclocked it, when the FSB was at 266.
I can set the FSB back to 266 and test that again with 2.6.20 if you think
that's the problem (I suspect it's not). But cpufreq should probably either
disable itself or work correctly because the failure mode is pretty bad. I
wouldn't have noticed the problem if I hadn't cat-ed /proc/cpuinfo.
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Bug 7866] cpufreq fails to correctly identify Intel Conroe operating frequencies
@ 2007-02-07 15:01 bugme-daemon
0 siblings, 0 replies; 8+ messages in thread
From: bugme-daemon @ 2007-02-07 15:01 UTC (permalink / raw)
To: cpufreq
http://bugzilla.kernel.org/show_bug.cgi?id=7866
alexey.y.starikovskiy@intel.com changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |REJECTED
Resolution| |WILL_NOT_FIX
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Bug 7866] cpufreq fails to correctly identify Intel Conroe operating frequencies
@ 2007-02-07 14:59 bugme-daemon
0 siblings, 0 replies; 8+ messages in thread
From: bugme-daemon @ 2007-02-07 14:59 UTC (permalink / raw)
To: cpufreq
http://bugzilla.kernel.org/show_bug.cgi?id=7866
------- Additional Comments From alexey.y.starikovskiy@intel.com 2007-02-07 06:50 -------
cpufreq works. it switches between right frequencies (they are programmed as
multipliers for FSB freq). The only "broken" thing is the output of cpufreq,
there it prints these (multipliers * lowest FSB freq, which is 100Mhz). Values
to print cpufreq takes from BIOS, so it is BIOS who used 100Mhz instead of
your 350 for above calculation. 6-9 is a valid range for E6600. if you
multiply it by default 266 you will get advertised frequencies of E6600, if
you multiply them by 350, you will have your real frequencies.
cpufreq has no access to FSB frequency, so there is no option but to either
live with such printouts, or bug your BIOS vendor about it.
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Bug 7866] cpufreq fails to correctly identify Intel Conroe operating frequencies
@ 2007-02-07 13:57 bugme-daemon
0 siblings, 0 replies; 8+ messages in thread
From: bugme-daemon @ 2007-02-07 13:57 UTC (permalink / raw)
To: cpufreq
http://bugzilla.kernel.org/show_bug.cgi?id=7866
------- Additional Comments From jared@jaredcam.net 2007-02-07 05:48 -------
The FSB is currently overclocked, I think I have it set at 350 or so. However,
I was still having this problem before I overclocked it, when the FSB was at 266.
I can set the FSB back to 266 and test that again with 2.6.20 if you think
that's the problem (I suspect it's not). But cpufreq should probably either
disable itself or work correctly because the failure mode is pretty bad. I
wouldn't have noticed the problem if I hadn't cat-ed /proc/cpuinfo.
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Bug 7866] cpufreq fails to correctly identify Intel Conroe operating frequencies
@ 2007-02-07 7:00 bugme-daemon
0 siblings, 0 replies; 8+ messages in thread
From: bugme-daemon @ 2007-02-07 7:00 UTC (permalink / raw)
To: cpufreq
http://bugzilla.kernel.org/show_bug.cgi?id=7866
------- Additional Comments From alexey.y.starikovskiy@intel.com 2007-02-06 22:51 -------
Jared,
What frequency is set for your FSB? is it 266/1066 or something else?
Some people reported that they see such frequency values from BIOS if they (or
mainboard manufacturer) overclocked the FSB. Could you check if you see right
values if the FSB is set to default above?
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Bug 7866] cpufreq fails to correctly identify Intel Conroe operating frequencies
@ 2007-02-06 23:56 bugme-daemon
0 siblings, 0 replies; 8+ messages in thread
From: bugme-daemon @ 2007-02-06 23:56 UTC (permalink / raw)
To: cpufreq
http://bugzilla.kernel.org/show_bug.cgi?id=7866
jared@jaredcam.net changed:
What |Removed |Added
----------------------------------------------------------------------------
Kernel Version|2.6.20-rc5 |2.6.20
------- Additional Comments From jared@jaredcam.net 2007-02-06 15:47 -------
I've updated to 2.6.20 final and I'm still having the same problem.
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Bug 7866] cpufreq fails to correctly identify Intel Conroe operating frequencies
@ 2007-01-23 23:28 bugme-daemon
0 siblings, 0 replies; 8+ messages in thread
From: bugme-daemon @ 2007-01-23 23:28 UTC (permalink / raw)
To: cpufreq
http://bugzilla.kernel.org/show_bug.cgi?id=7866
------- Additional Comments From jared@jaredcam.net 2007-01-23 15:20 -------
Created an attachment (id=10167)
--> (http://bugzilla.kernel.org/attachment.cgi?id=10167&action=view)
result of acpidump
Here is the output of acpidump
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Bug 7866] cpufreq fails to correctly identify Intel Conroe operating frequencies
@ 2007-01-23 8:23 bugme-daemon
0 siblings, 0 replies; 8+ messages in thread
From: bugme-daemon @ 2007-01-23 8:23 UTC (permalink / raw)
To: cpufreq
http://bugzilla.kernel.org/show_bug.cgi?id=7866
luming.yu@intel.com changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |acpi-
| |bugzilla@lists.sourceforge.n
| |et
------- Additional Comments From luming.yu@intel.com 2007-01-23 00:15 -------
Please post acpidump output
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2007-02-07 15:01 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-02-07 13:57 [Bug 7866] cpufreq fails to correctly identify Intel Conroe operating frequencies bugme-daemon
-- strict thread matches above, loose matches on Subject: below --
2007-02-07 15:01 bugme-daemon
2007-02-07 14:59 bugme-daemon
2007-02-07 13:57 bugme-daemon
2007-02-07 7:00 bugme-daemon
2007-02-06 23:56 bugme-daemon
2007-01-23 23:28 bugme-daemon
2007-01-23 8:23 bugme-daemon
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.