* - proper-backlight-selection-for-fbdev-drivers.patch removed from -mm tree
@ 2007-02-10 5:14 akpm
0 siblings, 0 replies; 2+ messages in thread
From: akpm @ 2007-02-10 5:14 UTC (permalink / raw)
To: jsimmons, mm-commits
The patch titled
Proper backlight selection for fbdev drivers
has been removed from the -mm tree. Its filename was
proper-backlight-selection-for-fbdev-drivers.patch
This patch was dropped because git-backlight tree broke it
------------------------------------------------------
Subject: Proper backlight selection for fbdev drivers
From: James Simmons <jsimmons@infradead.org>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
drivers/video/Kconfig | 73 +++++++++++++++----------------
drivers/video/aty/aty128fb.c | 4 -
drivers/video/aty/atyfb_base.c | 4 -
3 files changed, 40 insertions(+), 41 deletions(-)
diff -puN drivers/video/Kconfig~proper-backlight-selection-for-fbdev-drivers drivers/video/Kconfig
--- a/drivers/video/Kconfig~proper-backlight-selection-for-fbdev-drivers
+++ a/drivers/video/Kconfig
@@ -4,20 +4,9 @@
menu "Graphics support"
-config FIRMWARE_EDID
- bool "Enable firmware EDID"
- default y
- ---help---
- This enables access to the EDID transferred from the firmware.
- On the i386, this is from the Video BIOS. Enable this if DDC/I2C
- transfers do not work for your driver and if you are using
- nvidiafb, i810fb or savagefb.
-
- In general, choosing Y for this option is safe. If you
- experience extremely long delays while booting before you get
- something on your display, try setting this to N. Matrox cards in
- combination with certain motherboards and monitors are known to
- suffer from this problem.
+if SYSFS
+ source "drivers/video/backlight/Kconfig"
+endif
config FB
tristate "Support for frame buffer devices"
@@ -53,9 +42,27 @@ config FB
(e.g. an accelerated X server) and that are not frame buffer
device-aware may cause unexpected results. If unsure, say N.
+config FIRMWARE_EDID
+ bool "Enable firmware EDID"
+ depends on FB
+ default n
+ ---help---
+ This enables access to the EDID transferred from the firmware.
+ On the i386, this is from the Video BIOS. Enable this if DDC/I2C
+ transfers do not work for your driver and if you are using
+ nvidiafb, i810fb or savagefb.
+
+ In general, choosing Y for this option is safe. If you
+ experience extremely long delays while booting before you get
+ something on your display, try setting this to N. Matrox cards in
+ combination with certain motherboards and monitors are known to
+ suffer from this problem.
+
config FB_DDC
tristate
- depends on FB && I2C && I2C_ALGOBIT
+ depends on FB
+ select I2C_ALGOBIT
+ select I2C
default n
config FB_CFB_FILLRECT
@@ -126,6 +133,9 @@ config FB_TILEBLITTING
This is particularly important to one driver, matroxfb. If
unsure, say N.
+comment "Frambuffer hardware drivers"
+ depends on FB
+
config FB_CIRRUS
tristate "Cirrus Logic support"
depends on FB && (ZORRO || PCI)
@@ -703,6 +713,7 @@ config FB_NVIDIA
depends on FB && PCI
select I2C_ALGOBIT if FB_NVIDIA_I2C
select I2C if FB_NVIDIA_I2C
+ select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
@@ -731,8 +742,7 @@ config FB_NVIDIA_I2C
config FB_NVIDIA_BACKLIGHT
bool "Support for backlight control"
- depends on FB_NVIDIA && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_NVIDIA
default y
help
Say Y here if you want to control the backlight of your display.
@@ -740,9 +750,8 @@ config FB_NVIDIA_BACKLIGHT
config FB_RIVA
tristate "nVidia Riva support"
depends on FB && PCI
- select I2C_ALGOBIT if FB_RIVA_I2C
- select I2C if FB_RIVA_I2C
select FB_DDC if FB_RIVA_I2C
+ select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
@@ -779,8 +788,7 @@ config FB_RIVA_DEBUG
config FB_RIVA_BACKLIGHT
bool "Support for backlight control"
- depends on FB_RIVA && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_RIVA
default y
help
Say Y here if you want to control the backlight of your display.
@@ -830,8 +838,6 @@ config FB_I810_GTF
config FB_I810_I2C
bool "Enable DDC Support"
depends on FB_I810 && FB_I810_GTF
- select I2C
- select I2C_ALGOBIT
select FB_DDC
help
@@ -1021,9 +1027,8 @@ config FB_MATROX_MULTIHEAD
config FB_RADEON
tristate "ATI Radeon display support"
depends on FB && PCI
- select I2C_ALGOBIT if FB_RADEON_I2C
- select I2C if FB_RADEON_I2C
select FB_DDC if FB_RADEON_I2C
+ select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
@@ -1053,8 +1058,7 @@ config FB_RADEON_I2C
config FB_RADEON_BACKLIGHT
bool "Support for backlight control"
- depends on FB_RADEON && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_RADEON
default y
help
Say Y here if you want to control the backlight of your display.
@@ -1074,6 +1078,7 @@ config FB_ATY128
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
select FB_MACMODES if PPC_PMAC
help
This driver supports graphics boards with the ATI Rage128 chips.
@@ -1085,8 +1090,7 @@ config FB_ATY128
config FB_ATY128_BACKLIGHT
bool "Support for backlight control"
- depends on FB_ATY128 && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_ATY128
default y
help
Say Y here if you want to control the backlight of your display.
@@ -1097,6 +1101,7 @@ config FB_ATY
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_BACKLIGHT if FB_ATY_BACKLIGHT
select FB_MACMODES if PPC
help
This driver supports graphics boards with the ATI Mach64 chips.
@@ -1135,8 +1140,7 @@ config FB_ATY_GX
config FB_ATY_BACKLIGHT
bool "Support for backlight control"
- depends on FB_ATY && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_ATY
default y
help
Say Y here if you want to control the backlight of your display.
@@ -1150,8 +1154,6 @@ config FB_S3TRIO
config FB_SAVAGE
tristate "S3 Savage support"
depends on FB && PCI && EXPERIMENTAL
- select I2C_ALGOBIT if FB_SAVAGE_I2C
- select I2C if FB_SAVAGE_I2C
select FB_DDC if FB_SAVAGE_I2C
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
@@ -1646,6 +1648,7 @@ config FB_VIRTUAL
the vfb_enable=1 option.
If unsure, say N.
+
if VT
source "drivers/video/console/Kconfig"
endif
@@ -1654,9 +1657,5 @@ if FB || SGI_NEWPORT_CONSOLE
source "drivers/video/logo/Kconfig"
endif
-if SYSFS
- source "drivers/video/backlight/Kconfig"
-endif
-
endmenu
diff -puN drivers/video/aty/aty128fb.c~proper-backlight-selection-for-fbdev-drivers drivers/video/aty/aty128fb.c
--- a/drivers/video/aty/aty128fb.c~proper-backlight-selection-for-fbdev-drivers
+++ a/drivers/video/aty/aty128fb.c
@@ -2215,7 +2215,7 @@ static int aty128fb_blank(int blank, str
return 0;
#ifdef CONFIG_FB_ATY128_BACKLIGHT
- if (machine_is(powermac) && blank)
+ if (blank)
aty128_bl_set_power(fb, FB_BLANK_POWERDOWN);
#endif
@@ -2234,7 +2234,7 @@ static int aty128fb_blank(int blank, str
}
#ifdef CONFIG_FB_ATY128_BACKLIGHT
- if (machine_is(powermac) && !blank)
+ if (!blank)
aty128_bl_set_power(fb, FB_BLANK_UNBLANK);
#endif
diff -puN drivers/video/aty/atyfb_base.c~proper-backlight-selection-for-fbdev-drivers drivers/video/aty/atyfb_base.c
--- a/drivers/video/aty/atyfb_base.c~proper-backlight-selection-for-fbdev-drivers
+++ a/drivers/video/aty/atyfb_base.c
@@ -2814,7 +2814,7 @@ static int atyfb_blank(int blank, struct
return 0;
#ifdef CONFIG_FB_ATY_BACKLIGHT
- if (machine_is(powermac) && blank > FB_BLANK_NORMAL)
+ if (blank > FB_BLANK_NORMAL)
aty_bl_set_power(info, FB_BLANK_POWERDOWN);
#elif defined(CONFIG_FB_ATY_GENERIC_LCD)
if (par->lcd_table && blank > FB_BLANK_NORMAL &&
@@ -2846,7 +2846,7 @@ static int atyfb_blank(int blank, struct
aty_st_le32(CRTC_GEN_CNTL, gen_cntl, par);
#ifdef CONFIG_FB_ATY_BACKLIGHT
- if (machine_is(powermac) && blank <= FB_BLANK_NORMAL)
+ if (blank <= FB_BLANK_NORMAL)
aty_bl_set_power(info, FB_BLANK_UNBLANK);
#elif defined(CONFIG_FB_ATY_GENERIC_LCD)
if (par->lcd_table && blank <= FB_BLANK_NORMAL &&
_
Patches currently in -mm which might be from jsimmons@infradead.org are
origin.patch
git-input.patch
proper-backlight-selection-for-fbdev-drivers.patch
fbdev-driver-for-s3-trio-virge.patch
fbdev-driver-for-s3-trio-virge-update.patch
fbdev-driver-for-s3-trio-virge-update-2.patch
fbdev-driver-for-s3-trio-virge-update-2-fix.patch
remove-broken-video-drivers-v4.patch
tgafb-switch-to-framebuffer_alloc.patch
tgafb-fix-copying-overlapping-areas.patch
tgafb-support-the-directcolor-visual.patch
tgafb-fix-the-mode-register-setting.patch
tgafb-module-support-fixes.patch
tgafb-sync-on-green-support-fixes.patch
tgafb-fix-the-pci-id-table.patch
remove-bogus-con_is_present-prototypes.patch
cyber2010-framebuffer-on-arm-netwinder-fix.patch
cyber2010-framebuffer-on-arm-netwinder-fix-tidy.patch
proper-prototype-for-tosh_smm.patch
recognize-video=gx1fb-option.patch
correct-apparent-typo-config_aty_ct-in-aty-video.patch
pm3fb-kill-pci_find_device-usage.patch
drivers-video-sis-convert-to-generic-boolean.patch
matroxfb-use-kzalloc.patch
remove-the-broken-fb_s3trio-driver.patch
video-fb-add-true-ref_count-atomicity.patch
video-fb-kzalloc-changes.patch
change-nvidiafb_remove-to-__devexit.patch
ps3-add-shutdown-to-virtual-uart-port-driver-framework.patch
ps3-av-settings-driver.patch
fbdev-modedb-allow-refresh-rates-for-named-video-modes.patch
fbdev-modedb-make-more-pointer-parameters-const.patch
fb_videomode_to_var-reset-virtual-screen-parameters.patch
ps3-preallocate-bootmem-memory-for-ps3fb.patch
ps3-virtual-frame-buffer-driver.patch
ps3-disable-display-flipping-during-mode-changes.patch
ps3-cleanup-ps3fb-before-clearing-hpte.patch
ps3-ps3av-fb-defconfig-updates.patch
scheduled-removal-of-sa_xxx-interrupt-flags-fixups.patch
^ permalink raw reply [flat|nested] 2+ messages in thread
* - proper-backlight-selection-for-fbdev-drivers.patch removed from -mm tree
@ 2006-12-13 8:00 akpm
0 siblings, 0 replies; 2+ messages in thread
From: akpm @ 2006-12-13 8:00 UTC (permalink / raw)
To: jsimmons, mm-commits
The patch titled
Proper backlight selection for fbdev drivers
has been removed from the -mm tree. Its filename was
proper-backlight-selection-for-fbdev-drivers.patch
This patch was dropped because it had testing failures
------------------------------------------------------
Subject: Proper backlight selection for fbdev drivers
From: James Simmons <jsimmons@infradead.org>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
drivers/video/Kconfig | 73 +++++++++++++++++++---------------------
1 file changed, 36 insertions(+), 37 deletions(-)
diff -puN drivers/video/Kconfig~proper-backlight-selection-for-fbdev-drivers drivers/video/Kconfig
--- a/drivers/video/Kconfig~proper-backlight-selection-for-fbdev-drivers
+++ a/drivers/video/Kconfig
@@ -4,20 +4,9 @@
menu "Graphics support"
-config FIRMWARE_EDID
- bool "Enable firmware EDID"
- default y
- ---help---
- This enables access to the EDID transferred from the firmware.
- On the i386, this is from the Video BIOS. Enable this if DDC/I2C
- transfers do not work for your driver and if you are using
- nvidiafb, i810fb or savagefb.
-
- In general, choosing Y for this option is safe. If you
- experience extremely long delays while booting before you get
- something on your display, try setting this to N. Matrox cards in
- combination with certain motherboards and monitors are known to
- suffer from this problem.
+if SYSFS
+ source "drivers/video/backlight/Kconfig"
+endif
config FB
tristate "Support for frame buffer devices"
@@ -53,9 +42,27 @@ config FB
(e.g. an accelerated X server) and that are not frame buffer
device-aware may cause unexpected results. If unsure, say N.
+config FIRMWARE_EDID
+ bool "Enable firmware EDID"
+ depends on FB
+ default n
+ ---help---
+ This enables access to the EDID transferred from the firmware.
+ On the i386, this is from the Video BIOS. Enable this if DDC/I2C
+ transfers do not work for your driver and if you are using
+ nvidiafb, i810fb or savagefb.
+
+ In general, choosing Y for this option is safe. If you
+ experience extremely long delays while booting before you get
+ something on your display, try setting this to N. Matrox cards in
+ combination with certain motherboards and monitors are known to
+ suffer from this problem.
+
config FB_DDC
tristate
- depends on FB && I2C && I2C_ALGOBIT
+ depends on FB
+ select I2C_ALGOBIT
+ select I2C
default n
config FB_CFB_FILLRECT
@@ -126,6 +133,9 @@ config FB_TILEBLITTING
This is particularly important to one driver, matroxfb. If
unsure, say N.
+comment "Frambuffer hardware drivers"
+ depends on FB
+
config FB_CIRRUS
tristate "Cirrus Logic support"
depends on FB && (ZORRO || PCI)
@@ -703,6 +713,7 @@ config FB_NVIDIA
depends on FB && PCI
select I2C_ALGOBIT if FB_NVIDIA_I2C
select I2C if FB_NVIDIA_I2C
+ select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
@@ -731,8 +742,7 @@ config FB_NVIDIA_I2C
config FB_NVIDIA_BACKLIGHT
bool "Support for backlight control"
- depends on FB_NVIDIA && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_NVIDIA
default y
help
Say Y here if you want to control the backlight of your display.
@@ -740,9 +750,8 @@ config FB_NVIDIA_BACKLIGHT
config FB_RIVA
tristate "nVidia Riva support"
depends on FB && PCI
- select I2C_ALGOBIT if FB_RIVA_I2C
- select I2C if FB_RIVA_I2C
select FB_DDC if FB_RIVA_I2C
+ select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
@@ -779,8 +788,7 @@ config FB_RIVA_DEBUG
config FB_RIVA_BACKLIGHT
bool "Support for backlight control"
- depends on FB_RIVA && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_RIVA
default y
help
Say Y here if you want to control the backlight of your display.
@@ -830,8 +838,6 @@ config FB_I810_GTF
config FB_I810_I2C
bool "Enable DDC Support"
depends on FB_I810 && FB_I810_GTF
- select I2C
- select I2C_ALGOBIT
select FB_DDC
help
@@ -1021,9 +1027,8 @@ config FB_MATROX_MULTIHEAD
config FB_RADEON
tristate "ATI Radeon display support"
depends on FB && PCI
- select I2C_ALGOBIT if FB_RADEON_I2C
- select I2C if FB_RADEON_I2C
select FB_DDC if FB_RADEON_I2C
+ select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
@@ -1053,8 +1058,7 @@ config FB_RADEON_I2C
config FB_RADEON_BACKLIGHT
bool "Support for backlight control"
- depends on FB_RADEON && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_RADEON
default y
help
Say Y here if you want to control the backlight of your display.
@@ -1074,6 +1078,7 @@ config FB_ATY128
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
select FB_MACMODES if PPC_PMAC
help
This driver supports graphics boards with the ATI Rage128 chips.
@@ -1085,8 +1090,7 @@ config FB_ATY128
config FB_ATY128_BACKLIGHT
bool "Support for backlight control"
- depends on FB_ATY128 && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_ATY128
default y
help
Say Y here if you want to control the backlight of your display.
@@ -1097,6 +1101,7 @@ config FB_ATY
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_BACKLIGHT if FB_ATY_BACKLIGHT
select FB_MACMODES if PPC
help
This driver supports graphics boards with the ATI Mach64 chips.
@@ -1135,8 +1140,7 @@ config FB_ATY_GX
config FB_ATY_BACKLIGHT
bool "Support for backlight control"
- depends on FB_ATY && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_ATY
default y
help
Say Y here if you want to control the backlight of your display.
@@ -1150,8 +1154,6 @@ config FB_S3TRIO
config FB_SAVAGE
tristate "S3 Savage support"
depends on FB && PCI && EXPERIMENTAL
- select I2C_ALGOBIT if FB_SAVAGE_I2C
- select I2C if FB_SAVAGE_I2C
select FB_DDC if FB_SAVAGE_I2C
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
@@ -1636,6 +1638,7 @@ config FB_VIRTUAL
the vfb_enable=1 option.
If unsure, say N.
+
if VT
source "drivers/video/console/Kconfig"
endif
@@ -1644,9 +1647,5 @@ if FB || SGI_NEWPORT_CONSOLE
source "drivers/video/logo/Kconfig"
endif
-if SYSFS
- source "drivers/video/backlight/Kconfig"
-endif
-
endmenu
_
Patches currently in -mm which might be from jsimmons@infradead.org are
origin.patch
proper-backlight-selection-for-fbdev-drivers.patch
remove-references-to-non-existent.patch
sstfb-add-sysfs-interface.patch
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-02-10 5:15 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-02-10 5:14 - proper-backlight-selection-for-fbdev-drivers.patch removed from -mm tree akpm
-- strict thread matches above, loose matches on Subject: below --
2006-12-13 8:00 akpm
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.