* [linux-lvm] more than 10 shapshots freeze system @ 2007-02-12 17:47 ` Andre Noll 0 siblings, 0 replies; 4+ messages in thread From: Andre Noll @ 2007-02-12 17:47 UTC (permalink / raw) To: Alasdair G Kergon Cc: dm-devel, LVM general discussion and development, Heinz Mauelshagen [-- Attachment #1: Type: text/plain, Size: 1539 bytes --] Hi last week I was experimenting a bit with lvm snapshots. What I tried to do was to create 2 snapshots per day from our ~5T "backup" ext3 filesystem which gets rsynced twice a day from the (remote) "real" production filesystem. Our workload changes at most 50G of data a day, so I chose an initial snapshot size of 50G. After each rsync run, the snapshot lvs were extended so that each of them had again 50G free space available. This worked very well for about three days, i.e. six snapshots. From this day on, the system [1] became more and more sluggish during the rsync runs. Hitting return in bash on the otherwise idle system began to take as much as several seconds. Simple lvm commands like lvdisplay took up to several minutes. Two or three days later (i.e. 10+ snapshots) the system froze totally during the rsync. Nothing made it to the system log. I could easily reproduce this by running rsync again or by simply creating a 100M file. Is this an expected behaviour? If so, is there a formula in terms of filesytem/snapshot/ram size to compute the maximal number of snapshots that may be created from the same filesystem without risking to freeze the system? If this behaviour is not expected, what can I do to improve the situation or to debug this problem? Thanks Andre [1] HP Proliant, 2-way AMD Opteron, 5G Ram, linux-2.6.19.x and linux-2.6.20, ubuntu server lvm tools based on libdevmapper-1.02 -- The only person who always got his work done by Friday was Robinson Crusoe [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 4+ messages in thread
* more than 10 shapshots freeze system @ 2007-02-12 17:47 ` Andre Noll 0 siblings, 0 replies; 4+ messages in thread From: Andre Noll @ 2007-02-12 17:47 UTC (permalink / raw) To: Alasdair G Kergon Cc: dm-devel, LVM general discussion and development, Heinz Mauelshagen [-- Attachment #1.1: Type: text/plain, Size: 1539 bytes --] Hi last week I was experimenting a bit with lvm snapshots. What I tried to do was to create 2 snapshots per day from our ~5T "backup" ext3 filesystem which gets rsynced twice a day from the (remote) "real" production filesystem. Our workload changes at most 50G of data a day, so I chose an initial snapshot size of 50G. After each rsync run, the snapshot lvs were extended so that each of them had again 50G free space available. This worked very well for about three days, i.e. six snapshots. From this day on, the system [1] became more and more sluggish during the rsync runs. Hitting return in bash on the otherwise idle system began to take as much as several seconds. Simple lvm commands like lvdisplay took up to several minutes. Two or three days later (i.e. 10+ snapshots) the system froze totally during the rsync. Nothing made it to the system log. I could easily reproduce this by running rsync again or by simply creating a 100M file. Is this an expected behaviour? If so, is there a formula in terms of filesytem/snapshot/ram size to compute the maximal number of snapshots that may be created from the same filesystem without risking to freeze the system? If this behaviour is not expected, what can I do to improve the situation or to debug this problem? Thanks Andre [1] HP Proliant, 2-way AMD Opteron, 5G Ram, linux-2.6.19.x and linux-2.6.20, ubuntu server lvm tools based on libdevmapper-1.02 -- The only person who always got his work done by Friday was Robinson Crusoe [-- Attachment #1.2: Digital signature --] [-- Type: application/pgp-signature, Size: 189 bytes --] [-- Attachment #2: Type: text/plain, Size: 197 bytes --] _______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ ^ permalink raw reply [flat|nested] 4+ messages in thread
* [linux-lvm] Re: INFO: possible recursive locking detected. Was: more than 10 shapshots freeze system 2007-02-12 17:47 ` Andre Noll @ 2007-02-28 17:45 ` Andre Noll -1 siblings, 0 replies; 4+ messages in thread From: Andre Noll @ 2007-02-28 17:45 UTC (permalink / raw) To: Alasdair G Kergon Cc: dm-devel, Heinz Mauelshagen, LVM general discussion and development [-- Attachment #1: Type: text/plain, Size: 38645 bytes --] On 18:47, Andre Noll wrote: [problems with snapshots] No response, so here's some more info: - the problem remains with 2.6.20.1 and 2.6.21-rc2 - Writing to the lv from which a couple of snapshots were taken results in a kernel panic within minutes on 2.6.21-rc2. Screenshot: http://systemlinux.org/~maan/shots/kernel-panic-21-rc2-huangho2.png - Sometimes the system locks up without panicing. In this case it still responds to Alt + SysRq, is pingable, but otherwise dead (impossible to ssh in, no response on keyboard, no disk io) - 2.6.21-rc2 seems to have dm-related locking problems, see below Thanks Andre [ 0.000000] Linux version 2.6.21-rc2 (root@huangho2) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #39 SMP Wed Feb 28 14:19:48 CET 2007 [ 0.000000] Command line: [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000f57f8000 (usable) [ 0.000000] BIOS-e820: 00000000f57f8000 - 00000000f5800000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fdc00000 - 00000000fdc01000 (reserved) [ 0.000000] BIOS-e820: 00000000fdc10000 - 00000000fdc11000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) [ 0.000000] BIOS-e820: 00000000fec20000 - 00000000fec21000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000013ffff000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 1005560) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310719) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1310719 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F4F20, 0024 (r2 HP ) [ 0.000000] ACPI: XSDT F57F83E0, 0044 (r1 HP A05 2 Ò\x04 162E) [ 0.000000] ACPI: FACP F57F8460, 00F4 (r3 HP A05 2 Ò\x04 162E) [ 0.000000] ACPI: DSDT F57F8560, 422D (r1 HP DSDT 1 MSFT 2000001) [ 0.000000] ACPI: FACS F57F80C0, 0040 [ 0.000000] ACPI: APIC F57F8100, 00B8 (r1 HP 00000083 2 0) [ 0.000000] ACPI: SPCR F57F81E0, 0050 (r1 HP SPCRRBSU 1 Ò\x04 162E) [ 0.000000] ACPI: SRAT F57F8260, 0150 (r1 HP A05 1 0) [ 0.000000] SRAT: PXM 1 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 2 -> Node 1 [ 0.000000] ACPI: [SRAT:0x00] ignored 4 entries of 8 found [ 0.000000] SRAT: Node 0 PXM 1 0-c0000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786432) 1 entries of 3200 used [ 0.000000] SRAT: Node 1 PXM 2 c0000000-140000000 [ 0.000000] Entering add_active_range(1, 786432, 1005560) 2 entries of 3200 used [ 0.000000] Entering add_active_range(1, 1048576, 1310719) 3 entries of 3200 used [ 0.000000] NUMA: Using 30 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-00000000c0000000 [ 0.000000] Bootmem setup node 1 00000000c0000000-000000013ffff000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1310719 [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 786432 [ 0.000000] 1: 786432 -> 1005560 [ 0.000000] 1: 1048576 -> 1310719 [ 0.000000] On node 0 totalpages: 786335 [ 0.000000] DMA zone: 88 pages used for memmap [ 0.000000] DMA zone: 2643 pages reserved [ 0.000000] DMA zone: 1268 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16808 pages used for memmap [ 0.000000] DMA32 zone: 765528 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] On node 1 totalpages: 481271 [ 0.000000] DMA zone: 0 pages used for memmap [ 0.000000] DMA32 zone: 5632 pages used for memmap [ 0.000000] DMA32 zone: 213496 pages, LIFO batch:31 [ 0.000000] Normal zone: 5631 pages used for memmap [ 0.000000] Normal zone: 256512 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x908 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] Processor #2 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] Processor #3 [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 5, address 0xfec10000, GSI 24-27 [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[28]) [ 0.000000] IOAPIC[2]: apic_id 6, address 0xfec20000, GSI 28-31 [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfdc00000] gsi_base[32]) [ 0.000000] IOAPIC[3]: apic_id 7, address 0xfdc00000, GSI 32-35 [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfdc10000] gsi_base[36]) [ 0.000000] IOAPIC[4]: apic_id 8, address 0xfdc10000, GSI 36-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000 [ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000 [ 0.000000] Nosave address range: 00000000f57f8000 - 00000000f5800000 [ 0.000000] Nosave address range: 00000000f5800000 - 00000000fdc00000 [ 0.000000] Nosave address range: 00000000fdc00000 - 00000000fdc01000 [ 0.000000] Nosave address range: 00000000fdc01000 - 00000000fdc10000 [ 0.000000] Nosave address range: 00000000fdc10000 - 00000000fdc11000 [ 0.000000] Nosave address range: 00000000fdc11000 - 00000000fec00000 [ 0.000000] Nosave address range: 00000000fec00000 - 00000000fec01000 [ 0.000000] Nosave address range: 00000000fec01000 - 00000000fec10000 [ 0.000000] Nosave address range: 00000000fec10000 - 00000000fec11000 [ 0.000000] Nosave address range: 00000000fec11000 - 00000000fec20000 [ 0.000000] Nosave address range: 00000000fec20000 - 00000000fec21000 [ 0.000000] Nosave address range: 00000000fec21000 - 00000000fee00000 [ 0.000000] Nosave address range: 00000000fee00000 - 00000000fee10000 [ 0.000000] Nosave address range: 00000000fee10000 - 00000000ff800000 [ 0.000000] Nosave address range: 00000000ff800000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at f6000000 (gap: f5800000:8400000) [ 0.000000] PERCPU: Allocating 34176 bytes of per cpu data [ 0.000000] Built 2 zonelists. Total pages: 1236804 [ 0.000000] Kernel command line: [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 60.011565] time.c: Detected 2205.042 MHz processor. [ 60.014387] Console: colour VGA+ 80x25 [ 60.027154] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 60.027343] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 60.027459] ... MAX_LOCK_DEPTH: 30 [ 60.027585] ... MAX_LOCKDEP_KEYS: 2048 [ 60.027712] ... CLASSHASH_SIZE: 1024 [ 60.027839] ... MAX_LOCKDEP_ENTRIES: 8192 [ 60.027985] ... MAX_LOCKDEP_CHAINS: 16384 [ 60.028112] ... CHAINHASH_SIZE: 8192 [ 60.028239] memory used by lock dependency info: 1648 kB [ 60.028373] per task-struct memory footprint: 1680 bytes [ 60.028504] ------------------------ [ 60.028626] | Locking API testsuite: [ 60.028751] ---------------------------------------------------------------------------- [ 60.028958] | spin |wlock |rlock |mutex | wsem | rsem | [ 60.029150] -------------------------------------------------------------------------- [ 60.029345] A-A deadlock: ok | ok | ok | ok | ok | ok | [ 60.030804] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | [ 60.032266] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | [ 60.033792] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | [ 60.035317] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 60.036960] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 60.038567] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 60.040132] double unlock: ok | ok | ok | ok | ok | ok | [ 60.041467] initialize held: ok | ok | ok | ok | ok | ok | [ 60.042814] bad unlock order: ok | ok | ok | ok | ok | ok | [ 60.044216] -------------------------------------------------------------------------- [ 60.044369] recursive read-lock: | ok | | ok | [ 60.045068] recursive read-lock #2: | ok | | ok | [ 60.045777] mixed read-write-lock: | ok | | ok | [ 60.046483] mixed write-read-lock: | ok | | ok | [ 60.047203] -------------------------------------------------------------------------- [ 60.047355] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 60.048089] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 60.048825] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 60.049586] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 60.050322] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 60.051057] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 60.051791] hard-safe-A + irqs-on/12: ok | ok | ok | [ 60.052524] soft-safe-A + irqs-on/12: ok | ok | ok | [ 60.053259] hard-safe-A + irqs-on/21: ok | ok | ok | [ 60.054004] soft-safe-A + irqs-on/21: ok | ok | ok | [ 60.054739] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 60.055503] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 60.056266] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 60.057027] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 60.057799] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 60.058562] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 60.059325] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 60.060079] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 60.060836] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 60.061588] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 60.062331] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 60.063086] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 60.063842] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 60.064597] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 60.065355] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 60.066212] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 60.066970] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 60.067724] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 60.068483] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 60.069231] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 60.069995] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 60.070746] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 60.071506] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 60.072256] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 60.073008] hard-irq lock-inversion/123: ok | ok | ok | [ 60.073774] soft-irq lock-inversion/123: ok | ok | ok | [ 60.074534] hard-irq lock-inversion/132: ok | ok | ok | [ 60.075286] soft-irq lock-inversion/132: ok | ok | ok | [ 60.077757] hard-irq lock-inversion/213: ok | ok | ok | [ 60.078512] soft-irq lock-inversion/213: ok | ok | ok | [ 60.079273] hard-irq lock-inversion/231: ok | ok | ok | [ 60.080021] soft-irq lock-inversion/231: ok | ok | ok | [ 60.080775] hard-irq lock-inversion/312: ok | ok | ok | [ 60.081539] soft-irq lock-inversion/312: ok | ok | ok | [ 60.082300] hard-irq lock-inversion/321: ok | ok | ok | [ 60.083050] soft-irq lock-inversion/321: ok | ok | ok | [ 60.083804] hard-irq read-recursion/123: ok | [ 60.084164] soft-irq read-recursion/123: ok | [ 60.084525] hard-irq read-recursion/132: ok | [ 60.084894] soft-irq read-recursion/132: ok | [ 60.085255] hard-irq read-recursion/213: ok | [ 60.085625] soft-irq read-recursion/213: ok | [ 60.085986] hard-irq read-recursion/231: ok | [ 60.086346] soft-irq read-recursion/231: ok | [ 60.086707] hard-irq read-recursion/312: ok | [ 60.087067] soft-irq read-recursion/312: ok | [ 60.087428] hard-irq read-recursion/321: ok | [ 60.087788] soft-irq read-recursion/321: ok | [ 60.088166] ------------------------------------------------------- [ 60.088280] Good, all 218 testcases passed! | [ 60.088386] --------------------------------- [ 60.093055] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 60.100645] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 60.103301] Checking aperture... [ 60.103406] CPU 0: aperture @ 8000000 size 32 MB [ 60.103513] Aperture too small (32 MB) [ 60.110468] No AGP bridge found [ 60.110569] Your BIOS doesn't leave a aperture memory hole [ 60.110679] Please enable the IOMMU option in the BIOS setup [ 60.110791] This costs you 64 MB of RAM [ 60.148054] Mapping aperture over 65536 KB of RAM @ 8000000 [ 60.220565] Memory: 4871608k/5242876k available (3191k kernel code, 198816k reserved, 1506k data, 1560k init) [ 60.301335] Calibrating delay using timer specific routine.. 4415.63 BogoMIPS (lpj=8831279) [ 60.302065] Mount-cache hash table entries: 256 [ 60.303162] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 60.303280] CPU: L2 Cache: 1024K (64 bytes/line) [ 60.303388] CPU 0/0 -> Node 0 [ 60.303489] CPU: Physical Processor ID: 0 [ 60.303594] CPU: Processor Core ID: 0 [ 60.303709] Freeing SMP alternatives: 28k freed [ 60.303831] ACPI: Core revision 20070126 [ 60.354197] Using local APIC timer interrupts. [ 60.399617] result 12528651 [ 60.399716] Detected 12.528 MHz APIC timer. [ 60.402631] lockdep: not fixing up alternatives. [ 60.402859] Booting processor 1/4 APIC 0x2 [ 60.413270] Initializing CPU#1 [ 60.493172] Calibrating delay using timer specific routine.. 4410.33 BogoMIPS (lpj=8820661) [ 60.493179] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 60.493182] CPU: L2 Cache: 1024K (64 bytes/line) [ 60.493184] CPU 1/2 -> Node 1 [ 60.493186] CPU: Physical Processor ID: 1 [ 60.493187] CPU: Processor Core ID: 0 [ 60.493196] AMD Opteron(tm) Processor 275 stepping 02 [ 60.498040] lockdep: not fixing up alternatives. [ 60.499068] Booting processor 2/4 APIC 0x1 [ 60.509474] Initializing CPU#2 [ 60.589095] Calibrating delay using timer specific routine.. 4410.36 BogoMIPS (lpj=8820730) [ 60.589101] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 60.589103] CPU: L2 Cache: 1024K (64 bytes/line) [ 60.589106] CPU 2/1 -> Node 0 [ 60.589108] CPU: Physical Processor ID: 0 [ 60.589109] CPU: Processor Core ID: 1 [ 60.589115] AMD Opteron(tm) Processor 275 stepping 02 [ 60.594169] lockdep: not fixing up alternatives. [ 60.595207] Booting processor 3/4 APIC 0x3 [ 60.606128] Initializing CPU#3 [ 60.685018] Calibrating delay using timer specific routine.. 4410.35 BogoMIPS (lpj=8820706) [ 60.685026] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 60.685028] CPU: L2 Cache: 1024K (64 bytes/line) [ 60.685030] CPU 3/3 -> Node 1 [ 60.685032] CPU: Physical Processor ID: 1 [ 60.685034] CPU: Processor Core ID: 1 [ 60.685042] AMD Opteron(tm) Processor 275 stepping 02 [ 60.689051] Brought up 4 CPUs [ 60.690146] testing NMI watchdog ... OK. [ 62.181374] migration_cost=342,388 [ 62.182752] NET: Registered protocol family 16 [ 62.183361] ACPI: bus type pci registered [ 62.183477] PCI: Using configuration type 1 [ 62.199903] ACPI: SSDT F57FD000, 059D (r1 HP SSDT0 1 MSFT 2000001) [ 62.200597] ACPI: SSDT F57FD700, 059D (r1 HP SSDT1 1 MSFT 2000001) [ 62.201286] ACPI: SSDT F57FDE00, 059D (r1 HP SSDT2 1 MSFT 2000001) [ 62.201978] ACPI: SSDT F57FE500, 059D (r1 HP SSDT3 1 MSFT 2000001) [ 62.202964] ACPI: Interpreter enabled [ 62.203068] ACPI: Using IOAPIC for interrupt routing [ 62.219075] ACPI: PCI Root Bridge [CFG0] (0000:00) [ 62.219217] PCI: Probing PCI hardware (bus 00) [ 62.220855] Boot video device is 0000:01:03.0 [ 62.221528] ACPI: PCI Interrupt Routing Table [\_SB_.CFG0._PRT] [ 62.221804] ACPI: PCI Interrupt Routing Table [\_SB_.CFG0.PCI0._PRT] [ 62.222245] ACPI: PCI Interrupt Routing Table [\_SB_.CFG0.PCI1._PRT] [ 62.222498] ACPI: PCI Interrupt Routing Table [\_SB_.CFG0.PCI2._PRT] [ 62.233327] ACPI: PCI Root Bridge [CFG1] (0000:04) [ 62.233440] PCI: Probing PCI hardware (bus 04) [ 62.234321] ACPI: PCI Interrupt Routing Table [\_SB_.CFG1.PCI3._PRT] [ 62.235257] ACPI: PCI Interrupt Routing Table [\_SB_.CFG1.PCI4._PRT] [ 62.238167] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 7 *10 11) [ 62.238843] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 7 10 *11) [ 62.239507] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 7 10 11) *0, disabled. [ 62.240433] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *5 7 10 11) [ 62.241164] Linux Plug and Play Support v0.97 (c) Adam Belay [ 62.241307] pnp: PnP ACPI init [ 62.251012] pnp: PnP ACPI: found 10 devices [ 62.252581] SCSI subsystem initialized [ 62.252972] usbcore: registered new interface driver usbfs [ 62.253229] usbcore: registered new interface driver hub [ 62.253505] usbcore: registered new device driver usb [ 62.253734] PCI: Using ACPI for IRQ routing [ 62.253840] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 62.254447] PCI-DMA: Disabling AGP. [ 62.254604] PCI-DMA: aperture base @ 8000000 size 65536 KB [ 62.254715] PCI-DMA: using GART IOMMU. [ 62.254820] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 62.255163] pnp: 00:01: ioport range 0x230-0x233 has been reserved [ 62.255279] pnp: 00:01: ioport range 0x260-0x267 has been reserved [ 62.255395] pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 62.256784] PCI: Bridge: 0000:00:03.0 [ 62.256889] IO window: 4000-4fff [ 62.256996] MEM window: f5f00000-f7cfffff [ 62.257106] PREFETCH window: f8000000-f80fffff [ 62.257219] PCI: Bridge: 0000:00:07.0 [ 62.257323] IO window: 5000-5fff [ 62.257428] MEM window: f7d00000-f7dfffff [ 62.257535] PREFETCH window: f8100000-f81fffff [ 62.257664] PCI: Bridge: 0000:00:08.0 [ 62.257767] IO window: disabled. [ 62.257872] MEM window: f7e00000-f7efffff [ 62.257979] PREFETCH window: disabled. [ 62.258131] PCI: Bridge: 0000:04:09.0 [ 62.258235] IO window: 6000-6fff [ 62.258340] MEM window: f7f00000-f7ffffff [ 62.258448] PREFETCH window: f8200000-f82fffff [ 62.258557] PCI: Bridge: 0000:04:0a.0 [ 62.258678] IO window: disabled. [ 62.258783] MEM window: disabled. [ 62.258887] PREFETCH window: disabled. [ 62.259225] NET: Registered protocol family 2 [ 62.295814] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 62.297336] TCP established hash table entries: 65536 (order: 10, 4194304 bytes) [ 62.308707] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) [ 62.316827] TCP: Hash tables configured (established 65536 bind 65536) [ 62.316969] TCP reno registered [ 62.378385] audit: initializing netlink socket (disabled) [ 62.378554] audit(1172669747.284:1): initialized [ 62.378908] Total HugeTLB memory allocated, 0 [ 62.379768] VFS: Disk quotas dquot_6.5.1 [ 62.379919] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 62.380569] SGI XFS with large block/inode numbers, no debug enabled [ 62.381983] io scheduler noop registered [ 62.382148] io scheduler anticipatory registered [ 62.382315] io scheduler deadline registered [ 62.382557] io scheduler cfq registered (default) [ 62.417265] input: Power Button (FF) as /class/input/input0 [ 62.417388] ACPI: Power Button (FF) [PWRF] [ 62.428417] Generic RTC Driver v1.07 [ 62.428717] AMD768 RNG detected [ 62.429097] Linux agpgart interface v0.102 (c) Dave Jones [ 62.429209] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 62.429733] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 62.433509] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 62.434909] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 62.438010] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 62.438161] HP CISS Driver (v 3.6.14) [ 62.438623] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 24 (level, low) -> IRQ 24 [ 62.519482] cciss0: <0x46> at PCI 0000:02:04.0 IRQ 24 using DAC [ 62.535450] blocks= 142253280 block_size= 512 [ 62.543443] heads=255, sectors=32, cylinders=17433 [ 62.543445] [ 62.551435] blocks= 142253280 block_size= 512 [ 62.559430] heads=255, sectors=32, cylinders=17433 [ 62.559431] [ 62.561641] blocks= 142253280 block_size= 512 [ 62.561837] heads=255, sectors=32, cylinders=17433 [ 62.561838] [ 62.562089] cciss/c0d0: p1 p2 p3 [ 62.572705] blocks= 142253280 block_size= 512 [ 62.572908] heads=255, sectors=32, cylinders=17433 [ 62.572909] [ 62.573131] cciss/c0d1: p1 p2 p3 [ 62.580161] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 62.580279] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 62.580511] AMD8111: IDE controller at PCI slot 0000:00:04.1 [ 62.580636] AMD8111: chipset revision 3 [ 62.580740] AMD8111: not 100% native mode: will probe irqs later [ 62.580861] AMD8111: 0000:00:04.1 (rev 03) UDMA133 controller [ 62.580981] ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:pio, hdb:pio [ 62.581253] Probing IDE interface ide0... [ 63.374939] hda: TSSTcorpCD-ROM TS-L162C, ATAPI CD/DVD-ROM drive [ 64.051365] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 64.054275] hda: ATAPI 24X CD-ROM drive, 96kB Cache, UDMA(33) [ 64.054742] Uniform CD-ROM driver Revision: 3.20 [ 64.059130] Loading iSCSI transport class v2.0-724. [ 64.059576] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 64.059745] ACPI: PCI Interrupt 0000:01:00.0[D] -> GSI 19 (level, low) -> IRQ 19 [ 64.059977] ohci_hcd 0000:01:00.0: OHCI Host Controller [ 64.060598] ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 64.060776] ohci_hcd 0000:01:00.0: irq 19, io mem 0xf7cf0000 [ 64.120747] usb usb1: configuration #1 chosen from 1 choice [ 64.121075] hub 1-0:1.0: USB hub found [ 64.121216] hub 1-0:1.0: 3 ports detected [ 64.226637] ACPI: PCI Interrupt 0000:01:00.1[D] -> GSI 19 (level, low) -> IRQ 19 [ 64.226866] ohci_hcd 0000:01:00.1: OHCI Host Controller [ 64.227141] ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2 [ 64.227310] ohci_hcd 0000:01:00.1: irq 19, io mem 0xf7ce0000 [ 64.288399] usb usb2: configuration #1 chosen from 1 choice [ 64.288670] hub 2-0:1.0: USB hub found [ 64.288787] hub 2-0:1.0: 3 ports detected [ 64.394428] usbcore: registered new interface driver hiddev [ 64.394672] usbcore: registered new interface driver usbhid [ 64.394786] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 64.395187] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 64.397164] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 64.397331] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 64.397800] mice: PS/2 mouse device common for all mice [ 64.439516] input: AT Translated Set 2 keyboard as /class/input/input1 [ 64.444884] md: raid0 personality registered for level 0 [ 64.444996] md: raid1 personality registered for level 1 [ 64.445400] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 64.446079] TCP cubic registered [ 64.446220] NET: Registered protocol family 1 [ 64.446758] Freeing unused kernel memory: 1560k freed [ 64.448226] Write protecting the kernel read-only data: 1157k [ 64.450003] Time: acpi_pm clocksource has been installed. [ 64.500964] md: md0 stopped. [ 64.544656] md: bind<cciss/c0d1p1> [ 64.545204] md: bind<cciss/c0d0p1> [ 64.545949] raid1: raid set md0 active with 2 out of 2 mirrors [ 64.548036] md: md1 stopped. [ 64.579344] md: bind<cciss/c0d1p2> [ 64.579803] md: bind<cciss/c0d0p2> [ 64.580367] raid1: raid set md1 active with 2 out of 2 mirrors [ 64.582393] md: md2 stopped. [ 64.598875] md: bind<cciss/c0d1p3> [ 64.599325] md: bind<cciss/c0d0p3> [ 64.599892] raid1: raid set md2 active with 2 out of 2 mirrors [ 64.625046] kjournald starting. Commit interval 5 seconds [ 64.625155] EXT3-fs: mounted filesystem with ordered data mode. [ 68.318788] tg3.c:v3.74 (February 20, 2007) [ 68.318969] ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 28 (level, low) -> IRQ 28 [ 68.366156] eth0: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:18:71:e4:5e:8a [ 68.366669] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0] [ 68.366824] eth0: dma_rwctrl[769f4000] dma_mask[64-bit] [ 68.366995] ACPI: PCI Interrupt 0000:03:06.1[B] -> GSI 29 (level, low) -> IRQ 29 [ 68.414189] eth1: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:18:71:e4:5e:89 [ 68.414704] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] [ 68.414860] eth1: dma_rwctrl[769f4000] dma_mask[64-bit] [ 68.572438] QLogic Fibre Channel HBA Driver [ 68.572724] ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 32 (level, low) -> IRQ 32 [ 68.573262] qla2xxx 0000:05:08.0: Found an ISP2422, irq 32, iobase 0xffffc20000022000 [ 68.573716] qla2xxx 0000:05:08.0: Configuring PCI space... [ 68.576054] qla2xxx 0000:05:08.0: Configure NVRAM parameters... [ 68.582688] qla2xxx 0000:05:08.0: Verifying loaded RISC code... [ 68.666290] PM: Writing back config space on device 0000:03:06.1 at offset b (was 164814e4, writing d00e11) [ 68.666307] PM: Writing back config space on device 0000:03:06.1 at offset 3 (was 804000, writing 804010) [ 68.666312] PM: Writing back config space on device 0000:03:06.1 at offset 2 (was 2000000, writing 2000010) [ 68.666318] PM: Writing back config space on device 0000:03:06.1 at offset 1 (was 2b00000, writing 2b00146) [ 68.848753] Adding 6540152k swap on /dev/md2. Priority:-1 extents:1 across:6540152k [ 68.918029] qla2xxx 0000:05:08.0: Allocated (64 KB) for EFT... [ 68.918352] qla2xxx 0000:05:08.0: Allocated (1413 KB) for firmware dump... [ 68.938105] scsi0 : qla2xxx [ 69.029240] EXT3 FS on md1, internal journal [ 69.071784] qla2xxx 0000:05:08.0: [ 69.071785] QLogic Fibre Channel HBA Driver: 8.01.07-k5 [ 69.071786] QLogic HP AE369-60001 - QLA2340 [ 69.071787] ISP2422: PCI-X Mode 1 (133 MHz) @ 0000:05:08.0 hdma+, host#=0, fw=4.00.27 [IP] [ 69.072317] ACPI: PCI Interrupt 0000:05:08.1[B] -> GSI 33 (level, low) -> IRQ 33 [ 69.072671] qla2xxx 0000:05:08.1: Found an ISP2422, irq 33, iobase 0xffffc20000028000 [ 69.073179] qla2xxx 0000:05:08.1: Configuring PCI space... [ 69.075480] qla2xxx 0000:05:08.1: Configure NVRAM parameters... [ 69.082057] qla2xxx 0000:05:08.1: Verifying loaded RISC code... [ 69.425615] qla2xxx 0000:05:08.1: Allocated (64 KB) for EFT... [ 69.425949] qla2xxx 0000:05:08.1: Allocated (1413 KB) for firmware dump... [ 69.445950] scsi1 : qla2xxx [ 69.570607] PM: Writing back config space on device 0000:03:06.0 at offset b (was 164814e4, writing d00e11) [ 69.570627] PM: Writing back config space on device 0000:03:06.0 at offset 3 (was 804000, writing 804010) [ 69.570634] PM: Writing back config space on device 0000:03:06.0 at offset 2 (was 2000000, writing 2000010) [ 69.570641] PM: Writing back config space on device 0000:03:06.0 at offset 1 (was 2b00000, writing 2b00146) [ 69.595597] qla2xxx 0000:05:08.1: [ 69.595599] QLogic Fibre Channel HBA Driver: 8.01.07-k5 [ 69.595600] QLogic HP AE369-60001 - QLA2340 [ 69.595601] ISP2422: PCI-X Mode 1 (133 MHz) @ 0000:05:08.1 hdma+, host#=1, fw=4.00.27 [IP] [ 69.761182] qla2xxx 0000:05:08.0: LIP reset occured (f8f7). [ 69.796520] qla2xxx 0000:05:08.0: LIP occured (f8f7). [ 69.798698] qla2xxx 0000:05:08.0: LOOP UP detected (2 Gbps). [ 69.940110] scsi 0:0:0:0: Direct-Access transtec T6100F16R1-E 342I PQ: 0 ANSI: 5 [ 69.940785] sda : very big device. try to use READ CAPACITY(16). [ 69.940999] SCSI device sda: 11714863104 512-byte hdwr sectors (5998010 MB) [ 69.941386] sda: Write Protect is off [ 69.941491] sda: Mode Sense: 9b 00 00 08 [ 69.941794] SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 69.942531] sda : very big device. try to use READ CAPACITY(16). [ 69.942737] SCSI device sda: 11714863104 512-byte hdwr sectors (5998010 MB) [ 69.943093] sda: Write Protect is off [ 69.943198] sda: Mode Sense: 9b 00 00 08 [ 69.943483] SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 69.943665] sda: unknown partition table [ 69.944175] sd 0:0:0:0: Attached scsi disk sda [ 69.944491] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 70.206428] qla2xxx 0000:05:08.1: LIP reset occured (f7f7). [ 70.241834] qla2xxx 0000:05:08.1: LIP occured (f7f7). [ 70.244010] qla2xxx 0000:05:08.1: LOOP UP detected (2 Gbps). [ 70.447043] scsi 1:0:0:0: Direct-Access ADVUNI OXYGENRAID 416F 341B PQ: 0 ANSI: 3 [ 70.447653] sdb : very big device. try to use READ CAPACITY(16). [ 70.447918] SCSI device sdb: 9370656768 512-byte hdwr sectors (4797776 MB) [ 70.448369] sdb: Write Protect is off [ 70.448475] sdb: Mode Sense: 8f 00 00 08 [ 70.448939] SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 70.449468] sdb : very big device. try to use READ CAPACITY(16). [ 70.449737] SCSI device sdb: 9370656768 512-byte hdwr sectors (4797776 MB) [ 70.450175] sdb: Write Protect is off [ 70.450282] sdb: Mode Sense: 8f 00 00 08 [ 70.450738] SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 70.450919] sdb: unknown partition table [ 70.451546] sd 1:0:0:0: Attached scsi disk sdb [ 70.451809] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 70.494620] hda: packet command error: status=0x51 { DriveReady SeekComplete Error } [ 70.496805] hda: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [ 70.497134] ide: failed opcode was: unknown [ 71.057732] NET: Registered protocol family 17 [ 71.274301] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.274461] device-mapper: ioctl: error adding target to table [ 71.275795] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.275948] device-mapper: ioctl: error adding target to table [ 71.277527] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.277718] device-mapper: ioctl: error adding target to table [ 71.279141] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.279332] device-mapper: ioctl: error adding target to table [ 71.280791] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.280980] device-mapper: ioctl: error adding target to table [ 71.282711] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.282902] device-mapper: ioctl: error adding target to table [ 71.284376] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.284574] device-mapper: ioctl: error adding target to table [ 71.285940] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.286131] device-mapper: ioctl: error adding target to table [ 71.287512] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.287703] device-mapper: ioctl: error adding target to table [ 71.289147] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.289336] device-mapper: ioctl: error adding target to table [ 71.290811] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.291002] device-mapper: ioctl: error adding target to table [ 71.292474] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.292671] device-mapper: ioctl: error adding target to table [ 72.122418] tg3: eth2: Link is up at 1000 Mbps, full duplex. [ 72.122538] tg3: eth2: Flow control is on for TX and on for RX. [ 72.220661] tg3: eth3: Link is up at 1000 Mbps, full duplex. [ 72.220779] tg3: eth3: Flow control is off for TX and off for RX. [ 73.447400] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 73.486247] kjournald starting. Commit interval 5 seconds [ 73.503340] EXT3 FS on md0, internal journal [ 73.503519] EXT3-fs: mounted filesystem with ordered data mode. [ 77.025062] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 77.034331] NFSD: starting 90-second grace period [ 712.188710] [ 712.188713] ============================================= [ 712.188927] [ INFO: possible recursive locking detected ] [ 712.189041] 2.6.21-rc2 #39 [ 712.189142] --------------------------------------------- [ 712.189257] lvs/6073 is trying to acquire lock: [ 712.189368] (&md->io_lock){----}, at: [<ffffffff8049de65>] dm_request+0x25/0x150 [ 712.189771] [ 712.189772] but task is already holding lock: [ 712.189977] (&md->io_lock){----}, at: [<ffffffff8049de65>] dm_request+0x25/0x150 [ 712.190374] [ 712.190374] other info that might help us debug this: [ 712.190583] 1 lock held by lvs/6073: [ 712.190708] #0: (&md->io_lock){----}, at: [<ffffffff8049de65>] dm_request+0x25/0x150 [ 712.191230] [ 712.191231] stack backtrace: [ 712.191467] [ 712.191468] Call Trace: [ 712.191712] [<ffffffff8024aa49>] __lock_acquire+0xae9/0xfa0 [ 712.191855] [<ffffffff80264bb1>] mempool_alloc_slab+0x11/0x20 [ 712.191999] [<ffffffff8028997c>] kmem_cache_alloc+0x11c/0x140 [ 712.192142] [<ffffffff8049de65>] dm_request+0x25/0x150 [ 712.192283] [<ffffffff8024b2cb>] lock_acquire+0x8b/0xc0 [ 712.192423] [<ffffffff8049de65>] dm_request+0x25/0x150 [ 712.192561] [<ffffffff80245109>] down_read+0x39/0x50 [ 712.192698] [<ffffffff8049de65>] dm_request+0x25/0x150 [ 712.192837] [<ffffffff8039ba9e>] generic_make_request+0x17e/0x1a0 [ 712.192983] [<ffffffff8049cd2c>] __map_bio+0x4c/0xb0 [ 712.193119] [<ffffffff8049d5ff>] __split_bio+0x16f/0x3e0 [ 712.193261] [<ffffffff8049df70>] dm_request+0x130/0x150 [ 712.193401] [<ffffffff8039ba9e>] generic_make_request+0x17e/0x1a0 [ 712.193547] [<ffffffff802b9d90>] dio_bio_submit+0x40/0xa0 [ 712.193690] [<ffffffff8039df92>] submit_bio+0xd2/0xe0 [ 712.193826] [<ffffffff802b9dc8>] dio_bio_submit+0x78/0xa0 [ 712.193969] [<ffffffff802bafa8>] __blockdev_direct_IO+0x958/0xbd0 [ 712.194112] [<ffffffff8024ae4f>] __lock_acquire+0xeef/0xfa0 [ 712.194252] [<ffffffff802b9b19>] blkdev_direct_IO+0x49/0x50 [ 712.194392] [<ffffffff802b9a20>] blkdev_get_blocks+0x0/0xb0 [ 712.194531] [<ffffffff802628ad>] generic_file_direct_IO+0xad/0x120 [ 712.194675] [<ffffffff80264223>] generic_file_aio_read+0xd3/0x1d0 [ 712.194818] [<ffffffff8024ae4f>] __lock_acquire+0xeef/0xfa0 [ 712.194963] [<ffffffff8028fd19>] do_sync_read+0xe9/0x140 [ 712.195102] [<ffffffff8024b5b1>] trace_hardirqs_on+0x141/0x180 [ 712.195244] [<ffffffff80241ee0>] autoremove_wake_function+0x0/0x40 [ 712.195390] [<ffffffff8024b5b1>] trace_hardirqs_on+0x141/0x180 [ 712.195536] [<ffffffff8029014b>] vfs_read+0xbb/0x160 [ 712.195674] [<ffffffff80290ae0>] sys_read+0x50/0x90 [ 712.195813] [<ffffffff80209a7e>] system_call+0x7e/0x83 [ 712.195950] -- The only person who always got his work done by Friday was Robinson Crusoe [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: INFO: possible recursive locking detected. Was: more than 10 shapshots freeze system @ 2007-02-28 17:45 ` Andre Noll 0 siblings, 0 replies; 4+ messages in thread From: Andre Noll @ 2007-02-28 17:45 UTC (permalink / raw) To: Alasdair G Kergon Cc: dm-devel, Heinz Mauelshagen, LVM general discussion and development [-- Attachment #1.1: Type: text/plain, Size: 38645 bytes --] On 18:47, Andre Noll wrote: [problems with snapshots] No response, so here's some more info: - the problem remains with 2.6.20.1 and 2.6.21-rc2 - Writing to the lv from which a couple of snapshots were taken results in a kernel panic within minutes on 2.6.21-rc2. Screenshot: http://systemlinux.org/~maan/shots/kernel-panic-21-rc2-huangho2.png - Sometimes the system locks up without panicing. In this case it still responds to Alt + SysRq, is pingable, but otherwise dead (impossible to ssh in, no response on keyboard, no disk io) - 2.6.21-rc2 seems to have dm-related locking problems, see below Thanks Andre [ 0.000000] Linux version 2.6.21-rc2 (root@huangho2) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #39 SMP Wed Feb 28 14:19:48 CET 2007 [ 0.000000] Command line: [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000f57f8000 (usable) [ 0.000000] BIOS-e820: 00000000f57f8000 - 00000000f5800000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fdc00000 - 00000000fdc01000 (reserved) [ 0.000000] BIOS-e820: 00000000fdc10000 - 00000000fdc11000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) [ 0.000000] BIOS-e820: 00000000fec20000 - 00000000fec21000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000013ffff000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 1005560) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310719) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1310719 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F4F20, 0024 (r2 HP ) [ 0.000000] ACPI: XSDT F57F83E0, 0044 (r1 HP A05 2 Ò\x04 162E) [ 0.000000] ACPI: FACP F57F8460, 00F4 (r3 HP A05 2 Ò\x04 162E) [ 0.000000] ACPI: DSDT F57F8560, 422D (r1 HP DSDT 1 MSFT 2000001) [ 0.000000] ACPI: FACS F57F80C0, 0040 [ 0.000000] ACPI: APIC F57F8100, 00B8 (r1 HP 00000083 2 0) [ 0.000000] ACPI: SPCR F57F81E0, 0050 (r1 HP SPCRRBSU 1 Ò\x04 162E) [ 0.000000] ACPI: SRAT F57F8260, 0150 (r1 HP A05 1 0) [ 0.000000] SRAT: PXM 1 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 2 -> Node 1 [ 0.000000] ACPI: [SRAT:0x00] ignored 4 entries of 8 found [ 0.000000] SRAT: Node 0 PXM 1 0-c0000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786432) 1 entries of 3200 used [ 0.000000] SRAT: Node 1 PXM 2 c0000000-140000000 [ 0.000000] Entering add_active_range(1, 786432, 1005560) 2 entries of 3200 used [ 0.000000] Entering add_active_range(1, 1048576, 1310719) 3 entries of 3200 used [ 0.000000] NUMA: Using 30 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-00000000c0000000 [ 0.000000] Bootmem setup node 1 00000000c0000000-000000013ffff000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1310719 [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 786432 [ 0.000000] 1: 786432 -> 1005560 [ 0.000000] 1: 1048576 -> 1310719 [ 0.000000] On node 0 totalpages: 786335 [ 0.000000] DMA zone: 88 pages used for memmap [ 0.000000] DMA zone: 2643 pages reserved [ 0.000000] DMA zone: 1268 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16808 pages used for memmap [ 0.000000] DMA32 zone: 765528 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] On node 1 totalpages: 481271 [ 0.000000] DMA zone: 0 pages used for memmap [ 0.000000] DMA32 zone: 5632 pages used for memmap [ 0.000000] DMA32 zone: 213496 pages, LIFO batch:31 [ 0.000000] Normal zone: 5631 pages used for memmap [ 0.000000] Normal zone: 256512 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x908 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] Processor #2 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] Processor #3 [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 5, address 0xfec10000, GSI 24-27 [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[28]) [ 0.000000] IOAPIC[2]: apic_id 6, address 0xfec20000, GSI 28-31 [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfdc00000] gsi_base[32]) [ 0.000000] IOAPIC[3]: apic_id 7, address 0xfdc00000, GSI 32-35 [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfdc10000] gsi_base[36]) [ 0.000000] IOAPIC[4]: apic_id 8, address 0xfdc10000, GSI 36-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000 [ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000 [ 0.000000] Nosave address range: 00000000f57f8000 - 00000000f5800000 [ 0.000000] Nosave address range: 00000000f5800000 - 00000000fdc00000 [ 0.000000] Nosave address range: 00000000fdc00000 - 00000000fdc01000 [ 0.000000] Nosave address range: 00000000fdc01000 - 00000000fdc10000 [ 0.000000] Nosave address range: 00000000fdc10000 - 00000000fdc11000 [ 0.000000] Nosave address range: 00000000fdc11000 - 00000000fec00000 [ 0.000000] Nosave address range: 00000000fec00000 - 00000000fec01000 [ 0.000000] Nosave address range: 00000000fec01000 - 00000000fec10000 [ 0.000000] Nosave address range: 00000000fec10000 - 00000000fec11000 [ 0.000000] Nosave address range: 00000000fec11000 - 00000000fec20000 [ 0.000000] Nosave address range: 00000000fec20000 - 00000000fec21000 [ 0.000000] Nosave address range: 00000000fec21000 - 00000000fee00000 [ 0.000000] Nosave address range: 00000000fee00000 - 00000000fee10000 [ 0.000000] Nosave address range: 00000000fee10000 - 00000000ff800000 [ 0.000000] Nosave address range: 00000000ff800000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at f6000000 (gap: f5800000:8400000) [ 0.000000] PERCPU: Allocating 34176 bytes of per cpu data [ 0.000000] Built 2 zonelists. Total pages: 1236804 [ 0.000000] Kernel command line: [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 60.011565] time.c: Detected 2205.042 MHz processor. [ 60.014387] Console: colour VGA+ 80x25 [ 60.027154] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 60.027343] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 60.027459] ... MAX_LOCK_DEPTH: 30 [ 60.027585] ... MAX_LOCKDEP_KEYS: 2048 [ 60.027712] ... CLASSHASH_SIZE: 1024 [ 60.027839] ... MAX_LOCKDEP_ENTRIES: 8192 [ 60.027985] ... MAX_LOCKDEP_CHAINS: 16384 [ 60.028112] ... CHAINHASH_SIZE: 8192 [ 60.028239] memory used by lock dependency info: 1648 kB [ 60.028373] per task-struct memory footprint: 1680 bytes [ 60.028504] ------------------------ [ 60.028626] | Locking API testsuite: [ 60.028751] ---------------------------------------------------------------------------- [ 60.028958] | spin |wlock |rlock |mutex | wsem | rsem | [ 60.029150] -------------------------------------------------------------------------- [ 60.029345] A-A deadlock: ok | ok | ok | ok | ok | ok | [ 60.030804] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | [ 60.032266] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | [ 60.033792] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | [ 60.035317] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 60.036960] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 60.038567] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 60.040132] double unlock: ok | ok | ok | ok | ok | ok | [ 60.041467] initialize held: ok | ok | ok | ok | ok | ok | [ 60.042814] bad unlock order: ok | ok | ok | ok | ok | ok | [ 60.044216] -------------------------------------------------------------------------- [ 60.044369] recursive read-lock: | ok | | ok | [ 60.045068] recursive read-lock #2: | ok | | ok | [ 60.045777] mixed read-write-lock: | ok | | ok | [ 60.046483] mixed write-read-lock: | ok | | ok | [ 60.047203] -------------------------------------------------------------------------- [ 60.047355] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 60.048089] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 60.048825] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 60.049586] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 60.050322] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 60.051057] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 60.051791] hard-safe-A + irqs-on/12: ok | ok | ok | [ 60.052524] soft-safe-A + irqs-on/12: ok | ok | ok | [ 60.053259] hard-safe-A + irqs-on/21: ok | ok | ok | [ 60.054004] soft-safe-A + irqs-on/21: ok | ok | ok | [ 60.054739] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 60.055503] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 60.056266] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 60.057027] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 60.057799] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 60.058562] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 60.059325] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 60.060079] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 60.060836] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 60.061588] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 60.062331] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 60.063086] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 60.063842] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 60.064597] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 60.065355] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 60.066212] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 60.066970] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 60.067724] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 60.068483] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 60.069231] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 60.069995] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 60.070746] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 60.071506] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 60.072256] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 60.073008] hard-irq lock-inversion/123: ok | ok | ok | [ 60.073774] soft-irq lock-inversion/123: ok | ok | ok | [ 60.074534] hard-irq lock-inversion/132: ok | ok | ok | [ 60.075286] soft-irq lock-inversion/132: ok | ok | ok | [ 60.077757] hard-irq lock-inversion/213: ok | ok | ok | [ 60.078512] soft-irq lock-inversion/213: ok | ok | ok | [ 60.079273] hard-irq lock-inversion/231: ok | ok | ok | [ 60.080021] soft-irq lock-inversion/231: ok | ok | ok | [ 60.080775] hard-irq lock-inversion/312: ok | ok | ok | [ 60.081539] soft-irq lock-inversion/312: ok | ok | ok | [ 60.082300] hard-irq lock-inversion/321: ok | ok | ok | [ 60.083050] soft-irq lock-inversion/321: ok | ok | ok | [ 60.083804] hard-irq read-recursion/123: ok | [ 60.084164] soft-irq read-recursion/123: ok | [ 60.084525] hard-irq read-recursion/132: ok | [ 60.084894] soft-irq read-recursion/132: ok | [ 60.085255] hard-irq read-recursion/213: ok | [ 60.085625] soft-irq read-recursion/213: ok | [ 60.085986] hard-irq read-recursion/231: ok | [ 60.086346] soft-irq read-recursion/231: ok | [ 60.086707] hard-irq read-recursion/312: ok | [ 60.087067] soft-irq read-recursion/312: ok | [ 60.087428] hard-irq read-recursion/321: ok | [ 60.087788] soft-irq read-recursion/321: ok | [ 60.088166] ------------------------------------------------------- [ 60.088280] Good, all 218 testcases passed! | [ 60.088386] --------------------------------- [ 60.093055] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 60.100645] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 60.103301] Checking aperture... [ 60.103406] CPU 0: aperture @ 8000000 size 32 MB [ 60.103513] Aperture too small (32 MB) [ 60.110468] No AGP bridge found [ 60.110569] Your BIOS doesn't leave a aperture memory hole [ 60.110679] Please enable the IOMMU option in the BIOS setup [ 60.110791] This costs you 64 MB of RAM [ 60.148054] Mapping aperture over 65536 KB of RAM @ 8000000 [ 60.220565] Memory: 4871608k/5242876k available (3191k kernel code, 198816k reserved, 1506k data, 1560k init) [ 60.301335] Calibrating delay using timer specific routine.. 4415.63 BogoMIPS (lpj=8831279) [ 60.302065] Mount-cache hash table entries: 256 [ 60.303162] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 60.303280] CPU: L2 Cache: 1024K (64 bytes/line) [ 60.303388] CPU 0/0 -> Node 0 [ 60.303489] CPU: Physical Processor ID: 0 [ 60.303594] CPU: Processor Core ID: 0 [ 60.303709] Freeing SMP alternatives: 28k freed [ 60.303831] ACPI: Core revision 20070126 [ 60.354197] Using local APIC timer interrupts. [ 60.399617] result 12528651 [ 60.399716] Detected 12.528 MHz APIC timer. [ 60.402631] lockdep: not fixing up alternatives. [ 60.402859] Booting processor 1/4 APIC 0x2 [ 60.413270] Initializing CPU#1 [ 60.493172] Calibrating delay using timer specific routine.. 4410.33 BogoMIPS (lpj=8820661) [ 60.493179] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 60.493182] CPU: L2 Cache: 1024K (64 bytes/line) [ 60.493184] CPU 1/2 -> Node 1 [ 60.493186] CPU: Physical Processor ID: 1 [ 60.493187] CPU: Processor Core ID: 0 [ 60.493196] AMD Opteron(tm) Processor 275 stepping 02 [ 60.498040] lockdep: not fixing up alternatives. [ 60.499068] Booting processor 2/4 APIC 0x1 [ 60.509474] Initializing CPU#2 [ 60.589095] Calibrating delay using timer specific routine.. 4410.36 BogoMIPS (lpj=8820730) [ 60.589101] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 60.589103] CPU: L2 Cache: 1024K (64 bytes/line) [ 60.589106] CPU 2/1 -> Node 0 [ 60.589108] CPU: Physical Processor ID: 0 [ 60.589109] CPU: Processor Core ID: 1 [ 60.589115] AMD Opteron(tm) Processor 275 stepping 02 [ 60.594169] lockdep: not fixing up alternatives. [ 60.595207] Booting processor 3/4 APIC 0x3 [ 60.606128] Initializing CPU#3 [ 60.685018] Calibrating delay using timer specific routine.. 4410.35 BogoMIPS (lpj=8820706) [ 60.685026] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 60.685028] CPU: L2 Cache: 1024K (64 bytes/line) [ 60.685030] CPU 3/3 -> Node 1 [ 60.685032] CPU: Physical Processor ID: 1 [ 60.685034] CPU: Processor Core ID: 1 [ 60.685042] AMD Opteron(tm) Processor 275 stepping 02 [ 60.689051] Brought up 4 CPUs [ 60.690146] testing NMI watchdog ... OK. [ 62.181374] migration_cost=342,388 [ 62.182752] NET: Registered protocol family 16 [ 62.183361] ACPI: bus type pci registered [ 62.183477] PCI: Using configuration type 1 [ 62.199903] ACPI: SSDT F57FD000, 059D (r1 HP SSDT0 1 MSFT 2000001) [ 62.200597] ACPI: SSDT F57FD700, 059D (r1 HP SSDT1 1 MSFT 2000001) [ 62.201286] ACPI: SSDT F57FDE00, 059D (r1 HP SSDT2 1 MSFT 2000001) [ 62.201978] ACPI: SSDT F57FE500, 059D (r1 HP SSDT3 1 MSFT 2000001) [ 62.202964] ACPI: Interpreter enabled [ 62.203068] ACPI: Using IOAPIC for interrupt routing [ 62.219075] ACPI: PCI Root Bridge [CFG0] (0000:00) [ 62.219217] PCI: Probing PCI hardware (bus 00) [ 62.220855] Boot video device is 0000:01:03.0 [ 62.221528] ACPI: PCI Interrupt Routing Table [\_SB_.CFG0._PRT] [ 62.221804] ACPI: PCI Interrupt Routing Table [\_SB_.CFG0.PCI0._PRT] [ 62.222245] ACPI: PCI Interrupt Routing Table [\_SB_.CFG0.PCI1._PRT] [ 62.222498] ACPI: PCI Interrupt Routing Table [\_SB_.CFG0.PCI2._PRT] [ 62.233327] ACPI: PCI Root Bridge [CFG1] (0000:04) [ 62.233440] PCI: Probing PCI hardware (bus 04) [ 62.234321] ACPI: PCI Interrupt Routing Table [\_SB_.CFG1.PCI3._PRT] [ 62.235257] ACPI: PCI Interrupt Routing Table [\_SB_.CFG1.PCI4._PRT] [ 62.238167] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 7 *10 11) [ 62.238843] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 7 10 *11) [ 62.239507] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 7 10 11) *0, disabled. [ 62.240433] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *5 7 10 11) [ 62.241164] Linux Plug and Play Support v0.97 (c) Adam Belay [ 62.241307] pnp: PnP ACPI init [ 62.251012] pnp: PnP ACPI: found 10 devices [ 62.252581] SCSI subsystem initialized [ 62.252972] usbcore: registered new interface driver usbfs [ 62.253229] usbcore: registered new interface driver hub [ 62.253505] usbcore: registered new device driver usb [ 62.253734] PCI: Using ACPI for IRQ routing [ 62.253840] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 62.254447] PCI-DMA: Disabling AGP. [ 62.254604] PCI-DMA: aperture base @ 8000000 size 65536 KB [ 62.254715] PCI-DMA: using GART IOMMU. [ 62.254820] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 62.255163] pnp: 00:01: ioport range 0x230-0x233 has been reserved [ 62.255279] pnp: 00:01: ioport range 0x260-0x267 has been reserved [ 62.255395] pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 62.256784] PCI: Bridge: 0000:00:03.0 [ 62.256889] IO window: 4000-4fff [ 62.256996] MEM window: f5f00000-f7cfffff [ 62.257106] PREFETCH window: f8000000-f80fffff [ 62.257219] PCI: Bridge: 0000:00:07.0 [ 62.257323] IO window: 5000-5fff [ 62.257428] MEM window: f7d00000-f7dfffff [ 62.257535] PREFETCH window: f8100000-f81fffff [ 62.257664] PCI: Bridge: 0000:00:08.0 [ 62.257767] IO window: disabled. [ 62.257872] MEM window: f7e00000-f7efffff [ 62.257979] PREFETCH window: disabled. [ 62.258131] PCI: Bridge: 0000:04:09.0 [ 62.258235] IO window: 6000-6fff [ 62.258340] MEM window: f7f00000-f7ffffff [ 62.258448] PREFETCH window: f8200000-f82fffff [ 62.258557] PCI: Bridge: 0000:04:0a.0 [ 62.258678] IO window: disabled. [ 62.258783] MEM window: disabled. [ 62.258887] PREFETCH window: disabled. [ 62.259225] NET: Registered protocol family 2 [ 62.295814] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 62.297336] TCP established hash table entries: 65536 (order: 10, 4194304 bytes) [ 62.308707] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) [ 62.316827] TCP: Hash tables configured (established 65536 bind 65536) [ 62.316969] TCP reno registered [ 62.378385] audit: initializing netlink socket (disabled) [ 62.378554] audit(1172669747.284:1): initialized [ 62.378908] Total HugeTLB memory allocated, 0 [ 62.379768] VFS: Disk quotas dquot_6.5.1 [ 62.379919] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 62.380569] SGI XFS with large block/inode numbers, no debug enabled [ 62.381983] io scheduler noop registered [ 62.382148] io scheduler anticipatory registered [ 62.382315] io scheduler deadline registered [ 62.382557] io scheduler cfq registered (default) [ 62.417265] input: Power Button (FF) as /class/input/input0 [ 62.417388] ACPI: Power Button (FF) [PWRF] [ 62.428417] Generic RTC Driver v1.07 [ 62.428717] AMD768 RNG detected [ 62.429097] Linux agpgart interface v0.102 (c) Dave Jones [ 62.429209] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 62.429733] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 62.433509] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 62.434909] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 62.438010] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 62.438161] HP CISS Driver (v 3.6.14) [ 62.438623] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 24 (level, low) -> IRQ 24 [ 62.519482] cciss0: <0x46> at PCI 0000:02:04.0 IRQ 24 using DAC [ 62.535450] blocks= 142253280 block_size= 512 [ 62.543443] heads=255, sectors=32, cylinders=17433 [ 62.543445] [ 62.551435] blocks= 142253280 block_size= 512 [ 62.559430] heads=255, sectors=32, cylinders=17433 [ 62.559431] [ 62.561641] blocks= 142253280 block_size= 512 [ 62.561837] heads=255, sectors=32, cylinders=17433 [ 62.561838] [ 62.562089] cciss/c0d0: p1 p2 p3 [ 62.572705] blocks= 142253280 block_size= 512 [ 62.572908] heads=255, sectors=32, cylinders=17433 [ 62.572909] [ 62.573131] cciss/c0d1: p1 p2 p3 [ 62.580161] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 62.580279] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 62.580511] AMD8111: IDE controller at PCI slot 0000:00:04.1 [ 62.580636] AMD8111: chipset revision 3 [ 62.580740] AMD8111: not 100% native mode: will probe irqs later [ 62.580861] AMD8111: 0000:00:04.1 (rev 03) UDMA133 controller [ 62.580981] ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:pio, hdb:pio [ 62.581253] Probing IDE interface ide0... [ 63.374939] hda: TSSTcorpCD-ROM TS-L162C, ATAPI CD/DVD-ROM drive [ 64.051365] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 64.054275] hda: ATAPI 24X CD-ROM drive, 96kB Cache, UDMA(33) [ 64.054742] Uniform CD-ROM driver Revision: 3.20 [ 64.059130] Loading iSCSI transport class v2.0-724. [ 64.059576] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 64.059745] ACPI: PCI Interrupt 0000:01:00.0[D] -> GSI 19 (level, low) -> IRQ 19 [ 64.059977] ohci_hcd 0000:01:00.0: OHCI Host Controller [ 64.060598] ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 64.060776] ohci_hcd 0000:01:00.0: irq 19, io mem 0xf7cf0000 [ 64.120747] usb usb1: configuration #1 chosen from 1 choice [ 64.121075] hub 1-0:1.0: USB hub found [ 64.121216] hub 1-0:1.0: 3 ports detected [ 64.226637] ACPI: PCI Interrupt 0000:01:00.1[D] -> GSI 19 (level, low) -> IRQ 19 [ 64.226866] ohci_hcd 0000:01:00.1: OHCI Host Controller [ 64.227141] ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2 [ 64.227310] ohci_hcd 0000:01:00.1: irq 19, io mem 0xf7ce0000 [ 64.288399] usb usb2: configuration #1 chosen from 1 choice [ 64.288670] hub 2-0:1.0: USB hub found [ 64.288787] hub 2-0:1.0: 3 ports detected [ 64.394428] usbcore: registered new interface driver hiddev [ 64.394672] usbcore: registered new interface driver usbhid [ 64.394786] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 64.395187] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 64.397164] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 64.397331] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 64.397800] mice: PS/2 mouse device common for all mice [ 64.439516] input: AT Translated Set 2 keyboard as /class/input/input1 [ 64.444884] md: raid0 personality registered for level 0 [ 64.444996] md: raid1 personality registered for level 1 [ 64.445400] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 64.446079] TCP cubic registered [ 64.446220] NET: Registered protocol family 1 [ 64.446758] Freeing unused kernel memory: 1560k freed [ 64.448226] Write protecting the kernel read-only data: 1157k [ 64.450003] Time: acpi_pm clocksource has been installed. [ 64.500964] md: md0 stopped. [ 64.544656] md: bind<cciss/c0d1p1> [ 64.545204] md: bind<cciss/c0d0p1> [ 64.545949] raid1: raid set md0 active with 2 out of 2 mirrors [ 64.548036] md: md1 stopped. [ 64.579344] md: bind<cciss/c0d1p2> [ 64.579803] md: bind<cciss/c0d0p2> [ 64.580367] raid1: raid set md1 active with 2 out of 2 mirrors [ 64.582393] md: md2 stopped. [ 64.598875] md: bind<cciss/c0d1p3> [ 64.599325] md: bind<cciss/c0d0p3> [ 64.599892] raid1: raid set md2 active with 2 out of 2 mirrors [ 64.625046] kjournald starting. Commit interval 5 seconds [ 64.625155] EXT3-fs: mounted filesystem with ordered data mode. [ 68.318788] tg3.c:v3.74 (February 20, 2007) [ 68.318969] ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 28 (level, low) -> IRQ 28 [ 68.366156] eth0: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:18:71:e4:5e:8a [ 68.366669] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0] [ 68.366824] eth0: dma_rwctrl[769f4000] dma_mask[64-bit] [ 68.366995] ACPI: PCI Interrupt 0000:03:06.1[B] -> GSI 29 (level, low) -> IRQ 29 [ 68.414189] eth1: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:18:71:e4:5e:89 [ 68.414704] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] [ 68.414860] eth1: dma_rwctrl[769f4000] dma_mask[64-bit] [ 68.572438] QLogic Fibre Channel HBA Driver [ 68.572724] ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 32 (level, low) -> IRQ 32 [ 68.573262] qla2xxx 0000:05:08.0: Found an ISP2422, irq 32, iobase 0xffffc20000022000 [ 68.573716] qla2xxx 0000:05:08.0: Configuring PCI space... [ 68.576054] qla2xxx 0000:05:08.0: Configure NVRAM parameters... [ 68.582688] qla2xxx 0000:05:08.0: Verifying loaded RISC code... [ 68.666290] PM: Writing back config space on device 0000:03:06.1 at offset b (was 164814e4, writing d00e11) [ 68.666307] PM: Writing back config space on device 0000:03:06.1 at offset 3 (was 804000, writing 804010) [ 68.666312] PM: Writing back config space on device 0000:03:06.1 at offset 2 (was 2000000, writing 2000010) [ 68.666318] PM: Writing back config space on device 0000:03:06.1 at offset 1 (was 2b00000, writing 2b00146) [ 68.848753] Adding 6540152k swap on /dev/md2. Priority:-1 extents:1 across:6540152k [ 68.918029] qla2xxx 0000:05:08.0: Allocated (64 KB) for EFT... [ 68.918352] qla2xxx 0000:05:08.0: Allocated (1413 KB) for firmware dump... [ 68.938105] scsi0 : qla2xxx [ 69.029240] EXT3 FS on md1, internal journal [ 69.071784] qla2xxx 0000:05:08.0: [ 69.071785] QLogic Fibre Channel HBA Driver: 8.01.07-k5 [ 69.071786] QLogic HP AE369-60001 - QLA2340 [ 69.071787] ISP2422: PCI-X Mode 1 (133 MHz) @ 0000:05:08.0 hdma+, host#=0, fw=4.00.27 [IP] [ 69.072317] ACPI: PCI Interrupt 0000:05:08.1[B] -> GSI 33 (level, low) -> IRQ 33 [ 69.072671] qla2xxx 0000:05:08.1: Found an ISP2422, irq 33, iobase 0xffffc20000028000 [ 69.073179] qla2xxx 0000:05:08.1: Configuring PCI space... [ 69.075480] qla2xxx 0000:05:08.1: Configure NVRAM parameters... [ 69.082057] qla2xxx 0000:05:08.1: Verifying loaded RISC code... [ 69.425615] qla2xxx 0000:05:08.1: Allocated (64 KB) for EFT... [ 69.425949] qla2xxx 0000:05:08.1: Allocated (1413 KB) for firmware dump... [ 69.445950] scsi1 : qla2xxx [ 69.570607] PM: Writing back config space on device 0000:03:06.0 at offset b (was 164814e4, writing d00e11) [ 69.570627] PM: Writing back config space on device 0000:03:06.0 at offset 3 (was 804000, writing 804010) [ 69.570634] PM: Writing back config space on device 0000:03:06.0 at offset 2 (was 2000000, writing 2000010) [ 69.570641] PM: Writing back config space on device 0000:03:06.0 at offset 1 (was 2b00000, writing 2b00146) [ 69.595597] qla2xxx 0000:05:08.1: [ 69.595599] QLogic Fibre Channel HBA Driver: 8.01.07-k5 [ 69.595600] QLogic HP AE369-60001 - QLA2340 [ 69.595601] ISP2422: PCI-X Mode 1 (133 MHz) @ 0000:05:08.1 hdma+, host#=1, fw=4.00.27 [IP] [ 69.761182] qla2xxx 0000:05:08.0: LIP reset occured (f8f7). [ 69.796520] qla2xxx 0000:05:08.0: LIP occured (f8f7). [ 69.798698] qla2xxx 0000:05:08.0: LOOP UP detected (2 Gbps). [ 69.940110] scsi 0:0:0:0: Direct-Access transtec T6100F16R1-E 342I PQ: 0 ANSI: 5 [ 69.940785] sda : very big device. try to use READ CAPACITY(16). [ 69.940999] SCSI device sda: 11714863104 512-byte hdwr sectors (5998010 MB) [ 69.941386] sda: Write Protect is off [ 69.941491] sda: Mode Sense: 9b 00 00 08 [ 69.941794] SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 69.942531] sda : very big device. try to use READ CAPACITY(16). [ 69.942737] SCSI device sda: 11714863104 512-byte hdwr sectors (5998010 MB) [ 69.943093] sda: Write Protect is off [ 69.943198] sda: Mode Sense: 9b 00 00 08 [ 69.943483] SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 69.943665] sda: unknown partition table [ 69.944175] sd 0:0:0:0: Attached scsi disk sda [ 69.944491] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 70.206428] qla2xxx 0000:05:08.1: LIP reset occured (f7f7). [ 70.241834] qla2xxx 0000:05:08.1: LIP occured (f7f7). [ 70.244010] qla2xxx 0000:05:08.1: LOOP UP detected (2 Gbps). [ 70.447043] scsi 1:0:0:0: Direct-Access ADVUNI OXYGENRAID 416F 341B PQ: 0 ANSI: 3 [ 70.447653] sdb : very big device. try to use READ CAPACITY(16). [ 70.447918] SCSI device sdb: 9370656768 512-byte hdwr sectors (4797776 MB) [ 70.448369] sdb: Write Protect is off [ 70.448475] sdb: Mode Sense: 8f 00 00 08 [ 70.448939] SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 70.449468] sdb : very big device. try to use READ CAPACITY(16). [ 70.449737] SCSI device sdb: 9370656768 512-byte hdwr sectors (4797776 MB) [ 70.450175] sdb: Write Protect is off [ 70.450282] sdb: Mode Sense: 8f 00 00 08 [ 70.450738] SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 70.450919] sdb: unknown partition table [ 70.451546] sd 1:0:0:0: Attached scsi disk sdb [ 70.451809] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 70.494620] hda: packet command error: status=0x51 { DriveReady SeekComplete Error } [ 70.496805] hda: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [ 70.497134] ide: failed opcode was: unknown [ 71.057732] NET: Registered protocol family 17 [ 71.274301] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.274461] device-mapper: ioctl: error adding target to table [ 71.275795] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.275948] device-mapper: ioctl: error adding target to table [ 71.277527] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.277718] device-mapper: ioctl: error adding target to table [ 71.279141] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.279332] device-mapper: ioctl: error adding target to table [ 71.280791] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.280980] device-mapper: ioctl: error adding target to table [ 71.282711] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.282902] device-mapper: ioctl: error adding target to table [ 71.284376] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.284574] device-mapper: ioctl: error adding target to table [ 71.285940] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.286131] device-mapper: ioctl: error adding target to table [ 71.287512] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.287703] device-mapper: ioctl: error adding target to table [ 71.289147] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.289336] device-mapper: ioctl: error adding target to table [ 71.290811] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.291002] device-mapper: ioctl: error adding target to table [ 71.292474] device-mapper: table: 238:8: linear: dm-linear: Device lookup failed [ 71.292671] device-mapper: ioctl: error adding target to table [ 72.122418] tg3: eth2: Link is up at 1000 Mbps, full duplex. [ 72.122538] tg3: eth2: Flow control is on for TX and on for RX. [ 72.220661] tg3: eth3: Link is up at 1000 Mbps, full duplex. [ 72.220779] tg3: eth3: Flow control is off for TX and off for RX. [ 73.447400] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 73.486247] kjournald starting. Commit interval 5 seconds [ 73.503340] EXT3 FS on md0, internal journal [ 73.503519] EXT3-fs: mounted filesystem with ordered data mode. [ 77.025062] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 77.034331] NFSD: starting 90-second grace period [ 712.188710] [ 712.188713] ============================================= [ 712.188927] [ INFO: possible recursive locking detected ] [ 712.189041] 2.6.21-rc2 #39 [ 712.189142] --------------------------------------------- [ 712.189257] lvs/6073 is trying to acquire lock: [ 712.189368] (&md->io_lock){----}, at: [<ffffffff8049de65>] dm_request+0x25/0x150 [ 712.189771] [ 712.189772] but task is already holding lock: [ 712.189977] (&md->io_lock){----}, at: [<ffffffff8049de65>] dm_request+0x25/0x150 [ 712.190374] [ 712.190374] other info that might help us debug this: [ 712.190583] 1 lock held by lvs/6073: [ 712.190708] #0: (&md->io_lock){----}, at: [<ffffffff8049de65>] dm_request+0x25/0x150 [ 712.191230] [ 712.191231] stack backtrace: [ 712.191467] [ 712.191468] Call Trace: [ 712.191712] [<ffffffff8024aa49>] __lock_acquire+0xae9/0xfa0 [ 712.191855] [<ffffffff80264bb1>] mempool_alloc_slab+0x11/0x20 [ 712.191999] [<ffffffff8028997c>] kmem_cache_alloc+0x11c/0x140 [ 712.192142] [<ffffffff8049de65>] dm_request+0x25/0x150 [ 712.192283] [<ffffffff8024b2cb>] lock_acquire+0x8b/0xc0 [ 712.192423] [<ffffffff8049de65>] dm_request+0x25/0x150 [ 712.192561] [<ffffffff80245109>] down_read+0x39/0x50 [ 712.192698] [<ffffffff8049de65>] dm_request+0x25/0x150 [ 712.192837] [<ffffffff8039ba9e>] generic_make_request+0x17e/0x1a0 [ 712.192983] [<ffffffff8049cd2c>] __map_bio+0x4c/0xb0 [ 712.193119] [<ffffffff8049d5ff>] __split_bio+0x16f/0x3e0 [ 712.193261] [<ffffffff8049df70>] dm_request+0x130/0x150 [ 712.193401] [<ffffffff8039ba9e>] generic_make_request+0x17e/0x1a0 [ 712.193547] [<ffffffff802b9d90>] dio_bio_submit+0x40/0xa0 [ 712.193690] [<ffffffff8039df92>] submit_bio+0xd2/0xe0 [ 712.193826] [<ffffffff802b9dc8>] dio_bio_submit+0x78/0xa0 [ 712.193969] [<ffffffff802bafa8>] __blockdev_direct_IO+0x958/0xbd0 [ 712.194112] [<ffffffff8024ae4f>] __lock_acquire+0xeef/0xfa0 [ 712.194252] [<ffffffff802b9b19>] blkdev_direct_IO+0x49/0x50 [ 712.194392] [<ffffffff802b9a20>] blkdev_get_blocks+0x0/0xb0 [ 712.194531] [<ffffffff802628ad>] generic_file_direct_IO+0xad/0x120 [ 712.194675] [<ffffffff80264223>] generic_file_aio_read+0xd3/0x1d0 [ 712.194818] [<ffffffff8024ae4f>] __lock_acquire+0xeef/0xfa0 [ 712.194963] [<ffffffff8028fd19>] do_sync_read+0xe9/0x140 [ 712.195102] [<ffffffff8024b5b1>] trace_hardirqs_on+0x141/0x180 [ 712.195244] [<ffffffff80241ee0>] autoremove_wake_function+0x0/0x40 [ 712.195390] [<ffffffff8024b5b1>] trace_hardirqs_on+0x141/0x180 [ 712.195536] [<ffffffff8029014b>] vfs_read+0xbb/0x160 [ 712.195674] [<ffffffff80290ae0>] sys_read+0x50/0x90 [ 712.195813] [<ffffffff80209a7e>] system_call+0x7e/0x83 [ 712.195950] -- The only person who always got his work done by Friday was Robinson Crusoe [-- Attachment #1.2: Digital signature --] [-- Type: application/pgp-signature, Size: 189 bytes --] [-- Attachment #2: Type: text/plain, Size: 0 bytes --] ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2007-02-28 17:45 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2007-02-12 17:47 [linux-lvm] more than 10 shapshots freeze system Andre Noll 2007-02-12 17:47 ` Andre Noll 2007-02-28 17:45 ` [linux-lvm] Re: INFO: possible recursive locking detected. Was: " Andre Noll 2007-02-28 17:45 ` Andre Noll
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.
