* - fix-pnx8550-serial-breakage.patch removed from -mm tree
@ 2007-02-15 8:47 akpm
0 siblings, 0 replies; only message in thread
From: akpm @ 2007-02-15 8:47 UTC (permalink / raw)
To: vitalywool, ralf, mm-commits
The patch titled
fix PNX8550 serial breakage
has been removed from the -mm tree. Its filename was
fix-pnx8550-serial-breakage.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: fix PNX8550 serial breakage
From: Vitaly Wool <vitalywool@gmail.com>
Fix the serial header breakage for the PNX8550 MIPS platform.
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/linux/serial_core.h | 2
include/linux/serial_ip3106.h | 81 -------------------------------
include/linux/serial_pnx8xxx.h | 81 +++++++++++++++++++++++++++++++
3 files changed, 82 insertions(+), 82 deletions(-)
diff -puN include/linux/serial_core.h~fix-pnx8550-serial-breakage include/linux/serial_core.h
--- a/include/linux/serial_core.h~fix-pnx8550-serial-breakage
+++ a/include/linux/serial_core.h
@@ -122,7 +122,7 @@
/*Digi jsm */
#define PORT_JSM 69
-#define PORT_IP3106 70
+#define PORT_PNX8XXX 70
/* Hilscher netx */
#define PORT_NETX 71
diff -puN include/linux/serial_ip3106.h~fix-pnx8550-serial-breakage /dev/null
--- a/include/linux/serial_ip3106.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Embedded Alley Solutions, source@embeddedalley.com.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _LINUX_SERIAL_IP3106_H
-#define _LINUX_SERIAL_IP3106_H
-
-#include <linux/serial_core.h>
-#include <linux/device.h>
-
-#define IP3106_NR_PORTS 2
-
-struct ip3106_port {
- struct uart_port port;
- struct timer_list timer;
- unsigned int old_status;
-};
-
-/* register offsets */
-#define IP3106_LCR 0
-#define IP3106_MCR 0x004
-#define IP3106_BAUD 0x008
-#define IP3106_CFG 0x00c
-#define IP3106_FIFO 0x028
-#define IP3106_ISTAT 0xfe0
-#define IP3106_IEN 0xfe4
-#define IP3106_ICLR 0xfe8
-#define IP3106_ISET 0xfec
-#define IP3106_PD 0xff4
-#define IP3106_MID 0xffc
-
-#define IP3106_UART_LCR_TXBREAK (1<<30)
-#define IP3106_UART_LCR_PAREVN 0x10000000
-#define IP3106_UART_LCR_PAREN 0x08000000
-#define IP3106_UART_LCR_2STOPB 0x04000000
-#define IP3106_UART_LCR_8BIT 0x01000000
-#define IP3106_UART_LCR_TX_RST 0x00040000
-#define IP3106_UART_LCR_RX_RST 0x00020000
-#define IP3106_UART_LCR_RX_NEXT 0x00010000
-
-#define IP3106_UART_MCR_SCR 0xFF000000
-#define IP3106_UART_MCR_DCD 0x00800000
-#define IP3106_UART_MCR_CTS 0x00100000
-#define IP3106_UART_MCR_LOOP 0x00000010
-#define IP3106_UART_MCR_RTS 0x00000002
-#define IP3106_UART_MCR_DTR 0x00000001
-
-#define IP3106_UART_INT_TX 0x00000080
-#define IP3106_UART_INT_EMPTY 0x00000040
-#define IP3106_UART_INT_RCVTO 0x00000020
-#define IP3106_UART_INT_RX 0x00000010
-#define IP3106_UART_INT_RXOVRN 0x00000008
-#define IP3106_UART_INT_FRERR 0x00000004
-#define IP3106_UART_INT_BREAK 0x00000002
-#define IP3106_UART_INT_PARITY 0x00000001
-#define IP3106_UART_INT_ALLRX 0x0000003F
-#define IP3106_UART_INT_ALLTX 0x000000C0
-
-#define IP3106_UART_FIFO_TXFIFO 0x001F0000
-#define IP3106_UART_FIFO_TXFIFO_STA (0x1f<<16)
-#define IP3106_UART_FIFO_RXBRK 0x00008000
-#define IP3106_UART_FIFO_RXFE 0x00004000
-#define IP3106_UART_FIFO_RXPAR 0x00002000
-#define IP3106_UART_FIFO_RXFIFO 0x00001F00
-#define IP3106_UART_FIFO_RBRTHR 0x000000FF
-
-#endif
diff -puN /dev/null include/linux/serial_pnx8xxx.h
--- /dev/null
+++ a/include/linux/serial_pnx8xxx.h
@@ -0,0 +1,81 @@
+/*
+ * Embedded Alley Solutions, source@embeddedalley.com.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _LINUX_SERIAL_PNX8XXX_H
+#define _LINUX_SERIAL_PNX8XXX_H
+
+#include <linux/serial_core.h>
+#include <linux/device.h>
+
+#define PNX8XXX_NR_PORTS 2
+
+struct pnx8xxx_port {
+ struct uart_port port;
+ struct timer_list timer;
+ unsigned int old_status;
+};
+
+/* register offsets */
+#define PNX8XXX_LCR 0
+#define PNX8XXX_MCR 0x004
+#define PNX8XXX_BAUD 0x008
+#define PNX8XXX_CFG 0x00c
+#define PNX8XXX_FIFO 0x028
+#define PNX8XXX_ISTAT 0xfe0
+#define PNX8XXX_IEN 0xfe4
+#define PNX8XXX_ICLR 0xfe8
+#define PNX8XXX_ISET 0xfec
+#define PNX8XXX_PD 0xff4
+#define PNX8XXX_MID 0xffc
+
+#define PNX8XXX_UART_LCR_TXBREAK (1<<30)
+#define PNX8XXX_UART_LCR_PAREVN 0x10000000
+#define PNX8XXX_UART_LCR_PAREN 0x08000000
+#define PNX8XXX_UART_LCR_2STOPB 0x04000000
+#define PNX8XXX_UART_LCR_8BIT 0x01000000
+#define PNX8XXX_UART_LCR_TX_RST 0x00040000
+#define PNX8XXX_UART_LCR_RX_RST 0x00020000
+#define PNX8XXX_UART_LCR_RX_NEXT 0x00010000
+
+#define PNX8XXX_UART_MCR_SCR 0xFF000000
+#define PNX8XXX_UART_MCR_DCD 0x00800000
+#define PNX8XXX_UART_MCR_CTS 0x00100000
+#define PNX8XXX_UART_MCR_LOOP 0x00000010
+#define PNX8XXX_UART_MCR_RTS 0x00000002
+#define PNX8XXX_UART_MCR_DTR 0x00000001
+
+#define PNX8XXX_UART_INT_TX 0x00000080
+#define PNX8XXX_UART_INT_EMPTY 0x00000040
+#define PNX8XXX_UART_INT_RCVTO 0x00000020
+#define PNX8XXX_UART_INT_RX 0x00000010
+#define PNX8XXX_UART_INT_RXOVRN 0x00000008
+#define PNX8XXX_UART_INT_FRERR 0x00000004
+#define PNX8XXX_UART_INT_BREAK 0x00000002
+#define PNX8XXX_UART_INT_PARITY 0x00000001
+#define PNX8XXX_UART_INT_ALLRX 0x0000003F
+#define PNX8XXX_UART_INT_ALLTX 0x000000C0
+
+#define PNX8XXX_UART_FIFO_TXFIFO 0x001F0000
+#define PNX8XXX_UART_FIFO_TXFIFO_STA (0x1f<<16)
+#define PNX8XXX_UART_FIFO_RXBRK 0x00008000
+#define PNX8XXX_UART_FIFO_RXFE 0x00004000
+#define PNX8XXX_UART_FIFO_RXPAR 0x00002000
+#define PNX8XXX_UART_FIFO_RXFIFO 0x00001F00
+#define PNX8XXX_UART_FIFO_RBRTHR 0x000000FF
+
+#endif
_
Patches currently in -mm which might be from vitalywool@gmail.com are
origin.patch
8250-make-probing-for-txen-bug-a-config-option.patch
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-02-15 8:50 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-02-15 8:47 - fix-pnx8550-serial-breakage.patch removed from -mm tree akpm
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.