* [PATCH 3/3] d80211: Split antenna selection into TX and RX antenna
@ 2007-02-21 16:02 Ivo van Doorn
2007-02-23 16:28 ` Jiri Benc
0 siblings, 1 reply; 5+ messages in thread
From: Ivo van Doorn @ 2007-02-21 16:02 UTC (permalink / raw)
To: Jiri Benc, John W. Linville, Michael Buesch; +Cc: linux-wireless
With the split antenna selection rt2x00 can now read the default
value for both selections from the EEPROM and can now configure
the card correctly based on the individual RX and TX antenna selections.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
diff --git a/drivers/net/wireless/d80211/rt2x00/rt2400pci.c b/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
index 2e3a514..a64a5a9 100644
--- a/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
@@ -460,7 +460,8 @@ static void rt2400pci_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower)
rt2x00dev->tx_power = txpower;
}
-static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
+static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev,
+ int antenna_tx, int antenna_rx)
{
u8 reg_rx;
u8 reg_tx;
@@ -468,7 +469,7 @@ static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
/*
* Only continue when there is something to be done.
*/
- if (rt2x00dev->rx_params.antenna == antenna)
+ if (rt2x00dev->rx_status.antenna == antenna_rx)
return;
rt2x00_bbp_read(rt2x00dev, 4, ®_rx);
@@ -481,25 +482,24 @@ static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
reg_tx &= ~0x03;
/*
- * Ralink devices have have antenna options for both TX as RX.
- * The ieee80211 stack currently only provide the user to set
- * 1 antenna, by default this is considered to be the TX antenna.
+ * Configure the TX antenna.
*/
- if (antenna == 0) {
- /* Diversity. */
- reg_rx |= 0x02;
+ if (antenna_tx == 0) /* Diversity. */
reg_tx |= 0x01;
- } else if (antenna == 1) {
- /* RX: Antenna B */
- reg_rx |= 0x04;
- /* TX: Antenna A */
+ else if (antenna_tx == 1) /* TX: Antenna A */
reg_tx |= 0x00;
- } else if (antenna == 2) {
- /* RX: Antenna A */
- reg_rx |= 0x00;
- /* TX: Antenna B */
+ else if (antenna_tx == 2) /* TX: Antenna B */
reg_tx |= 0x02;
- }
+
+ /*
+ * Configure the RX antenna.
+ */
+ if (antenna_rx == 0) /* Diversity. */
+ reg_rx |= 0x02;
+ else if (antenna_rx == 1) /* RX: Antenna A */
+ reg_rx |= 0x00;
+ else if (antenna_rx == 2) /* RX: Antenna B */
+ reg_rx |= 0x04;
rt2x00_bbp_write(rt2x00dev, 4, reg_rx);
rt2x00_bbp_write(rt2x00dev, 1, reg_tx);
@@ -507,7 +507,7 @@ static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
/*
* Update active info for RX.
*/
- rt2x00dev->rx_params.antenna = antenna;
+ rt2x00dev->rx_status.antenna = antenna_rx;
}
static void rt2400pci_config_cw(struct rt2x00_dev *rt2x00dev,
@@ -1972,7 +1972,8 @@ static int rt2400pci_config(struct ieee80211_hw *hw,
rt2400pci_config_channel(rt2x00dev,
conf->channel_val, conf->channel, conf->freq);
rt2400pci_config_txpower(rt2x00dev, conf->power_level);
- rt2400pci_config_antenna(rt2x00dev, conf->antenna_sel);
+ rt2400pci_config_antenna(rt2x00dev,
+ conf->antenna_sel_tx, conf->antenna_sel_rx);
rt2400pci_config_duration(rt2x00dev,
(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME));
rt2400pci_config_phymode(rt2x00dev, conf->phymode);
@@ -2444,12 +2445,11 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Identify default antenna configuration.
- * Ralink devices have have antenna options for both TX as RX.
- * The ieee80211 stack currently only provide the user to set
- * 1 antenna, by default this is considered to be the TX antenna.
*/
- rt2x00dev->hw->conf.antenna_sel = rt2x00_get_field16(eeprom,
+ rt2x00dev->hw->conf.antenna_sel_tx = rt2x00_get_field16(eeprom,
EEPROM_ANTENNA_TX_DEFAULT);
+ rt2x00dev->hw->conf.antenna_sel_rx = rt2x00_get_field16(eeprom,
+ EEPROM_ANTENNA_RX_DEFAULT);
/*
* Store led mode, for correct led behaviour.
diff --git a/drivers/net/wireless/d80211/rt2x00/rt2500pci.c b/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
index 305cff6..aee6233 100644
--- a/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
@@ -509,7 +509,8 @@ static void rt2500pci_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower)
rt2x00dev->tx_power = txpower;
}
-static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
+static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev,
+ int antenna_tx, int antenna_rx)
{
u32 reg;
u8 reg_rx;
@@ -518,7 +519,7 @@ static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
/*
* Only continue when there is something to be done.
*/
- if (rt2x00dev->rx_params.antenna == antenna)
+ if (rt2x00dev->rx_status.antenna == antenna_rx)
return;
rt2x00_register_read(rt2x00dev, BBPCSR1, ®);
@@ -532,33 +533,33 @@ static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
reg_tx &= ~0x03;
/*
- * Ralink devices have have antenna options for both TX as RX.
- * The ieee80211 stack currently only provide the user to set
- * 1 antenna, by default this is considered to be the TX antenna.
+ * Configure the TX antenna.
*/
- if (antenna == 0) {
- /* Diversity. */
- reg_rx |= 0x02;
+ if (antenna_tx == 0) { /* Diversity. */
reg_tx |= 0x02;
rt2x00_set_field32(®, BBPCSR1_CCK, 2);
rt2x00_set_field32(®, BBPCSR1_OFDM, 2);
- } else if (antenna == 1) {
- /* RX: Antenna B */
- reg_rx |= 0x02;
- /* TX: Antenna A */
+ } else if (antenna_tx == 1) { /* TX: Antenna A */
reg_tx |= 0x00;
rt2x00_set_field32(®, BBPCSR1_CCK, 0);
rt2x00_set_field32(®, BBPCSR1_OFDM, 0);
- } else if (antenna == 2) {
- /* RX: Antenna A */
- reg_rx |= 0x00;
- /* TX: Antenna B */
+ } else if (antenna_tx == 2) { /* TX: Antenna B */
reg_tx |= 0x02;
rt2x00_set_field32(®, BBPCSR1_CCK, 2);
rt2x00_set_field32(®, BBPCSR1_OFDM, 2);
}
/*
+ * Configure the RX antenna.
+ */
+ if (antenna_rx == 0) /* Diversity. */
+ reg_rx |= 0x02;
+ else if (antenna_rx == 1) /* RX: Antenna A */
+ reg_rx |= 0x00;
+ else if (antenna_rx == 2) /* RX: Antenna B */
+ reg_rx |= 0x02;
+
+ /*
* RT2525E and RT5222 need to flip TX I/Q
*/
if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
@@ -584,7 +585,7 @@ static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
/*
* Update active info for RX.
*/
- rt2x00dev->rx_params.antenna = antenna;
+ rt2x00dev->rx_status.antenna = antenna_rx;
}
static void rt2500pci_config_duration(struct rt2x00_dev *rt2x00dev,
@@ -2137,7 +2138,8 @@ static int rt2500pci_config(struct ieee80211_hw *hw,
conf->channel_val, conf->channel, conf->freq,
conf->power_level);
rt2500pci_config_txpower(rt2x00dev, conf->power_level);
- rt2500pci_config_antenna(rt2x00dev, conf->antenna_sel);
+ rt2500pci_config_antenna(rt2x00dev,
+ conf->antenna_sel_tx, conf->antenna_sel_rx);
rt2500pci_config_duration(rt2x00dev,
(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME));
rt2500pci_config_phymode(rt2x00dev, conf->phymode);
@@ -2605,12 +2607,11 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Identify default antenna configuration.
- * Ralink devices have have antenna options for both TX as RX.
- * The ieee80211 stack currently only provide the user to set
- * 1 antenna, by default this is considered to be the TX antenna.
*/
- rt2x00dev->hw->conf.antenna_sel = rt2x00_get_field16(eeprom,
+ rt2x00dev->hw->conf.antenna_sel_tx = rt2x00_get_field16(eeprom,
EEPROM_ANTENNA_TX_DEFAULT);
+ rt2x00dev->hw->conf.antenna_sel_rx = rt2x00_get_field16(eeprom,
+ EEPROM_ANTENNA_RX_DEFAULT);
/*
* Store led mode, for correct led behaviour.
diff --git a/drivers/net/wireless/d80211/rt2x00/rt2500usb.c b/drivers/net/wireless/d80211/rt2x00/rt2500usb.c
index 0976c98..8caaadd 100644
--- a/drivers/net/wireless/d80211/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/d80211/rt2x00/rt2500usb.c
@@ -559,7 +559,8 @@ static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower)
rt2x00dev->tx_power = txpower;
}
-static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
+static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev,
+ int antenna_tx, int antenna_rx)
{
u8 reg_rx;
u8 reg_tx;
@@ -569,7 +570,7 @@ static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
/*
* Only continue when there is something to be done.
*/
- if (rt2x00dev->rx_params.antenna == antenna)
+ if (rt2x00dev->rx_status.antenna == antenna_rx)
return;
rt2x00_bbp_read(rt2x00dev, 2, ®_tx);
@@ -584,33 +585,33 @@ static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
reg_rx &= ~0x03;
/*
- * Ralink devices have have antenna options for both TX as RX.
- * The ieee80211 stack currently only provide the user to set
- * 1 antenna, by default this is considered to be the TX antenna.
+ * Configure the TX antenna.
*/
- if (antenna == 0) {
- /* Diversity. */
- reg_rx |= 0x01;
+ if (antenna_tx == 0) { /* Diversity. */
reg_tx |= 0x01;
rt2x00_set_field16(&csr5_reg, PHY_CSR5_CCK, 1);
rt2x00_set_field16(&csr6_reg, PHY_CSR6_OFDM, 1);
- } else if (antenna == 1) {
- /* RX: Antenna B */
- reg_rx |= 0x02;
- /* TX: Antenna A */
+ } else if (antenna_tx == 1) { /* TX: Antenna A */
reg_tx |= 0x00;
rt2x00_set_field16(&csr5_reg, PHY_CSR5_CCK, 0);
rt2x00_set_field16(&csr6_reg, PHY_CSR6_OFDM, 0);
- } else if (antenna == 2) {
- /* RX: Antenna A */
- reg_rx |= 0x00;
- /* TX: Antenna B */
+ } else if (antenna_tx == 2) { /* TX: Antenna B */
reg_tx |= 0x02;
rt2x00_set_field16(&csr5_reg, PHY_CSR5_CCK, 2);
rt2x00_set_field16(&csr6_reg, PHY_CSR6_OFDM, 2);
}
/*
+ * Configure the RX antenna.
+ */
+ if (antenna_rx == 0) /* Diversity. */
+ reg_rx |= 0x01;
+ else if (antenna_rx == 1) /* RX: Antenna A */
+ reg_rx |= 0x00;
+ else if (antenna_rx == 2) /* RX: Antenna B */
+ reg_rx |= 0x02;
+
+ /*
* RT2525E and RT5222 need to flip TX I/Q
*/
if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
@@ -637,7 +638,7 @@ static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
/*
* Update active info for RX.
*/
- rt2x00dev->rx_params.antenna = antenna;
+ rt2x00dev->rx_status.antenna = antenna_rx;
}
static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev,
@@ -2073,7 +2074,8 @@ static int rt2500usb_config(struct ieee80211_hw *hw,
conf->channel_val, conf->channel, conf->freq,
conf->power_level);
rt2500usb_config_txpower(rt2x00dev, conf->power_level);
- rt2500usb_config_antenna(rt2x00dev, conf->antenna_sel);
+ rt2500usb_config_antenna(rt2x00dev,
+ conf->antenna_sel_tx, conf->antenna_sel_rx);
rt2500usb_config_duration(rt2x00dev,
(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME));
rt2500usb_config_phymode(rt2x00dev, conf->phymode);
@@ -2455,12 +2457,11 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Identify default antenna configuration.
- * Ralink devices have have antenna options for both TX as RX.
- * The ieee80211 stack currently only provide the user to set
- * 1 antenna, by default this is considered to be the TX antenna.
*/
- rt2x00dev->hw->conf.antenna_sel = rt2x00_get_field16(eeprom,
+ rt2x00dev->hw->conf.antenna_sel_tx = rt2x00_get_field16(eeprom,
EEPROM_ANTENNA_TX_DEFAULT);
+ rt2x00dev->hw->conf.antenna_sel_rx = rt2x00_get_field16(eeprom,
+ EEPROM_ANTENNA_RX_DEFAULT);
/*
* Store led mode, for correct led behaviour.
diff --git a/drivers/net/wireless/d80211/rt2x00/rt61pci.c b/drivers/net/wireless/d80211/rt2x00/rt61pci.c
index 547c660..51ada44 100644
--- a/drivers/net/wireless/d80211/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/d80211/rt2x00/rt61pci.c
@@ -677,7 +677,7 @@ static void rt61pci_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower)
}
static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev,
- int antenna, int phymode)
+ int antenna_tx, int antenna_rx, int phymode)
{
u32 reg;
u8 reg_r3;
@@ -688,7 +688,7 @@ static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev,
/*
* Only continue when there is something to be done.
*/
- if (rt2x00dev->rx_params.antenna == antenna)
+ if (rt2x00dev->rx_status.antenna == antenna_rx)
return;
rt2x00_register_read(rt2x00dev, PHY_CSR0, ®);
@@ -753,50 +753,40 @@ static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev,
if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
rt2x00_rf(&rt2x00dev->chip, RF5325)) {
- if (antenna == 0) {
- /* Diversity. */
+ if (antenna_rx == 0) { /* Diversity. */
reg_r4 |= 0x02;
if (phymode != MODE_IEEE80211A)
reg_r4 |= 0x20;
- } else if (antenna == 1) {
- /* RX: Antenna B */
- /* TX: Antenna A */
+ } else if (antenna_rx == 1) { /* RX: Antenna A */
reg_r4 |= 0x01;
if (phymode == MODE_IEEE80211A)
- reg_r77 |= 0x03;
- else
reg_r77 &= ~0x03;
+ else
+ reg_r77 |= 0x03;
rt2x00_bbp_write(rt2x00dev, 77, reg_r77);
- } else if (antenna == 2) {
- /* RX: Antenna A */
- /* TX: Antenna B */
+ } else if (antenna_rx == 2) { /* RX: Antenna B */
reg_r4 |= 0x01;
if (phymode == MODE_IEEE80211A)
- reg_r77 &= ~0x03;
- else
reg_r77 |= 0x03;
+ else
+ reg_r77 &= ~0x03;
rt2x00_bbp_write(rt2x00dev, 77, reg_r77);
}
} else if (rt2x00_rf(&rt2x00dev->chip, RF2527) ||
(rt2x00_rf(&rt2x00dev->chip, RF2529) &&
GET_FLAG(rt2x00dev, CONFIG_DOUBLE_ANTENNA))) {
- if (antenna == 0) {
- /* Diversity. */
+ if (antenna_rx == 0) { /* Diversity. */
reg_r4 |= 0x22;
reg_r4 &= frame_type;
- } else if (antenna == 1) {
- /* RX: Antenna B */
- /* TX: Antenna A */
+ } else if (antenna_rx == 1) { /* RX: Antenna A */
reg_r4 |= 0x21;
reg_r4 &= frame_type;
- reg_r77 &= ~0x03;
+ reg_r77 |= 0x03;
rt2x00_bbp_write(rt2x00dev, 77, reg_r77);
- } else if (antenna == 2) {
- /* RX: Antenna A */
- /* TX: Antenna B */
+ } else if (antenna_rx == 2) { /* RX: Antenna B */
reg_r4 |= 0x21;
reg_r4 &= frame_type;
- reg_r77 |= 0x03;
+ reg_r77 &= ~0x03;
rt2x00_bbp_write(rt2x00dev, 77, reg_r77);
}
}
@@ -813,7 +803,7 @@ static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev,
/*
* Update active info for RX.
*/
- rt2x00dev->rx_params.antenna = antenna;
+ rt2x00dev->rx_status.antenna = antenna_rx;
}
static void rt61pci_config_duration(struct rt2x00_dev *rt2x00dev,
@@ -2632,7 +2622,8 @@ static int rt61pci_config(struct ieee80211_hw *hw,
conf->channel_val, conf->channel, conf->freq,
conf->power_level);
rt61pci_config_txpower(rt2x00dev, conf->power_level);
- rt61pci_config_antenna(rt2x00dev, conf->antenna_sel, conf->phymode);
+ rt61pci_config_antenna(rt2x00dev,
+ conf->antenna_sel_tx, conf->antenna_sel_rx, conf->phymode);
rt61pci_config_duration(rt2x00dev,
(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME));
rt61pci_config_phymode(rt2x00dev, conf->phymode);
@@ -3095,12 +3086,11 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Identify default antenna configuration.
- * Ralink devices have have antenna options for both TX as RX.
- * The ieee80211 stack currently only provide the user to set
- * 1 antenna, by default this is considered to be the TX antenna.
*/
- rt2x00dev->hw->conf.antenna_sel = rt2x00_get_field16(eeprom,
+ rt2x00dev->hw->conf.antenna_sel_tx = rt2x00_get_field16(eeprom,
EEPROM_ANTENNA_TX_DEFAULT);
+ rt2x00dev->hw->conf.antenna_sel_rx = rt2x00_get_field16(eeprom,
+ EEPROM_ANTENNA_RX_DEFAULT);
/*
* Read the Frame type.
diff --git a/drivers/net/wireless/d80211/rt2x00/rt73usb.c b/drivers/net/wireless/d80211/rt2x00/rt73usb.c
index be66e2f..922b6f0 100644
--- a/drivers/net/wireless/d80211/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/d80211/rt2x00/rt73usb.c
@@ -586,7 +586,7 @@ static void rt73usb_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower)
}
static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev,
- int antenna, int phymode)
+ int antenna_tx, int antenna_rx, int phymode)
{
u32 reg;
u8 reg_r3;
@@ -597,7 +597,7 @@ static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev,
/*
* Only continue when there is something to be done.
*/
- if (rt2x00dev->rx_params.antenna == antenna)
+ if (rt2x00dev->rx_status.antenna == antenna_rx)
return;
rt2x00_register_read(rt2x00dev, PHY_CSR0, ®);
@@ -660,52 +660,42 @@ static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev,
if (rt2x00_rf(&rt2x00dev->chip, RF5226) ||
rt2x00_rf(&rt2x00dev->chip, RF5225)) {
- if (antenna == 0) {
- /* Diversity. */
+ if (antenna_rx == 0) { /* Diversity. */
reg_r4 |= 0x02;
if (phymode != MODE_IEEE80211A)
reg_r4 |= 0x20;
reg_r4 &= frame_type;
- } else if (antenna == 1) {
- /* RX: Antenna B */
- /* TX: Antenna A */
+ } else if (antenna_rx == 1) { /* RX: Antenna A */
reg_r4 |= 0x01;
reg_r4 &= frame_type;
if (phymode == MODE_IEEE80211A)
- reg_r77 |= 0x03;
- else
reg_r77 &= ~0x03;
+ else
+ reg_r77 |= 0x03;
rt2x00_bbp_write(rt2x00dev, 77, reg_r77);
- } else if (antenna == 2) {
- /* RX: Antenna A */
- /* TX: Antenna B */
+ } else if (antenna_rx == 2) { /* RX: Antenna B */
reg_r4 |= 0x01;
reg_r4 &= frame_type;
if (phymode == MODE_IEEE80211A)
- reg_r77 &= ~0x03;
- else
reg_r77 |= 0x03;
+ else
+ reg_r77 &= ~0x03;
rt2x00_bbp_write(rt2x00dev, 77, reg_r77);
}
} else if (rt2x00_rf(&rt2x00dev->chip, RF2528) ||
rt2x00_rf(&rt2x00dev->chip, RF2527)) {
- if (antenna == 0) {
- /* Diversity. */
+ if (antenna_rx == 0) { /* Diversity. */
reg_r4 |= 0x22;
reg_r4 &= frame_type;
- } else if (antenna == 1) {
- /* RX: Antenna B */
- /* TX: Antenna A */
+ } else if (antenna_rx == 1) { /* RX: Antenna A */
reg_r4 |= 0x21;
reg_r4 &= frame_type;
- reg_r77 &= ~0x03;
+ reg_r77 |= 0x03;
rt2x00_bbp_write(rt2x00dev, 77, reg_r77);
- } else if (antenna == 2) {
- /* RX: Antenna A */
- /* TX: Antenna B */
+ } else if (antenna_rx == 2) { /* RX: Antenna B */
reg_r4 |= 0x21;
reg_r4 &= frame_type;
- reg_r77 |= 0x03;
+ reg_r77 &= ~0x03;
rt2x00_bbp_write(rt2x00dev, 77, reg_r77);
}
}
@@ -716,7 +706,7 @@ static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev,
/*
* Update active info for RX.
*/
- rt2x00dev->rx_params.antenna = antenna;
+ rt2x00dev->rx_status.antenna = antenna_rx;
}
static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev,
@@ -2344,7 +2334,8 @@ static int rt73usb_config(struct ieee80211_hw *hw,
conf->channel_val, conf->channel, conf->freq,
conf->power_level);
rt73usb_config_txpower(rt2x00dev, conf->power_level);
- rt73usb_config_antenna(rt2x00dev, conf->antenna_sel, conf->phymode);
+ rt73usb_config_antenna(rt2x00dev,
+ conf->antenna_sel_tx, conf->antenna_sel_rx, conf->phymode);
rt73usb_config_duration(rt2x00dev,
(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME));
rt73usb_config_phymode(rt2x00dev, conf->phymode);
@@ -2770,12 +2761,11 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Identify default antenna configuration.
- * Ralink devices have have antenna options for both TX as RX.
- * The ieee80211 stack currently only provide the user to set
- * 1 antenna, by default this is considered to be the TX antenna.
*/
- rt2x00dev->hw->conf.antenna_sel = rt2x00_get_field16(eeprom,
+ rt2x00dev->hw->conf.antenna_sel_tx = rt2x00_get_field16(eeprom,
EEPROM_ANTENNA_TX_DEFAULT);
+ rt2x00dev->hw->conf.antenna_sel_rx = rt2x00_get_field16(eeprom,
+ EEPROM_ANTENNA_RX_DEFAULT);
/*
* Read the Frame type.
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 3/3] d80211: Split antenna selection into TX and RX antenna
2007-02-21 16:02 [PATCH 3/3] d80211: Split antenna selection into TX and RX antenna Ivo van Doorn
@ 2007-02-23 16:28 ` Jiri Benc
2007-02-23 16:39 ` Ivo van Doorn
0 siblings, 1 reply; 5+ messages in thread
From: Jiri Benc @ 2007-02-23 16:28 UTC (permalink / raw)
To: Ivo van Doorn; +Cc: John W. Linville, Michael Buesch, linux-wireless
On Wed, 21 Feb 2007 17:02:47 +0100, Ivo van Doorn wrote:
> With the split antenna selection rt2x00 can now read the default
> value for both selections from the EEPROM and can now configure
> the card correctly based on the individual RX and TX antenna selections.
>
> [...]
> @@ -468,7 +469,7 @@ static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
> /*
> * Only continue when there is something to be done.
> */
> - if (rt2x00dev->rx_params.antenna == antenna)
> + if (rt2x00dev->rx_status.antenna == antenna_rx)
drivers/net/wireless/d80211/rt2x00/rt2400pci.c:472: error: 'struct rt2x00_dev' has no member named 'rx_status'
Jiri
--
Jiri Benc
SUSE Labs
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 3/3] d80211: Split antenna selection into TX and RX antenna
2007-02-23 16:28 ` Jiri Benc
@ 2007-02-23 16:39 ` Ivo van Doorn
2007-02-26 1:18 ` John W. Linville
0 siblings, 1 reply; 5+ messages in thread
From: Ivo van Doorn @ 2007-02-23 16:39 UTC (permalink / raw)
To: Jiri Benc; +Cc: John W. Linville, Michael Buesch, linux-wireless
On Friday 23 February 2007 17:28, Jiri Benc wrote:
> On Wed, 21 Feb 2007 17:02:47 +0100, Ivo van Doorn wrote:
> > With the split antenna selection rt2x00 can now read the default
> > value for both selections from the EEPROM and can now configure
> > the card correctly based on the individual RX and TX antenna selections.
> >
> > [...]
> > @@ -468,7 +469,7 @@ static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
> > /*
> > * Only continue when there is something to be done.
> > */
> > - if (rt2x00dev->rx_params.antenna == antenna)
> > + if (rt2x00dev->rx_status.antenna == antenna_rx)
>
> drivers/net/wireless/d80211/rt2x00/rt2400pci.c:472: error: 'struct rt2x00_dev' has no member named 'rx_status'
Sorry about that, I had renamed rx_params to rx_status in my cvs tree and hadn't set that
correctly to the git tree yet. I'll try to update rt2x00 inside wireless-dev as soon as possible,
but in the mean time here is the correct patch.
Signed-off-by: Ivo van Doorn<IvDoorn@gmail.com>
---
diff --git a/drivers/net/wireless/d80211/rt2x00/rt2400pci.c b/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
index 2e3a514..a64a5a9 100644
--- a/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
@@ -460,7 +460,8 @@ static void rt2400pci_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower)
rt2x00dev->tx_power = txpower;
}
-static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
+static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev,
+ int antenna_tx, int antenna_rx)
{
u8 reg_rx;
u8 reg_tx;
@@ -468,7 +469,7 @@ static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
/*
* Only continue when there is something to be done.
*/
- if (rt2x00dev->rx_params.antenna == antenna)
+ if (rt2x00dev->rx_params.antenna == antenna_rx)
return;
rt2x00_bbp_read(rt2x00dev, 4, ®_rx);
@@ -481,25 +482,24 @@ static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
reg_tx &= ~0x03;
/*
- * Ralink devices have have antenna options for both TX as RX.
- * The ieee80211 stack currently only provide the user to set
- * 1 antenna, by default this is considered to be the TX antenna.
+ * Configure the TX antenna.
*/
- if (antenna == 0) {
- /* Diversity. */
- reg_rx |= 0x02;
+ if (antenna_tx == 0) /* Diversity. */
reg_tx |= 0x01;
- } else if (antenna == 1) {
- /* RX: Antenna B */
- reg_rx |= 0x04;
- /* TX: Antenna A */
+ else if (antenna_tx == 1) /* TX: Antenna A */
reg_tx |= 0x00;
- } else if (antenna == 2) {
- /* RX: Antenna A */
- reg_rx |= 0x00;
- /* TX: Antenna B */
+ else if (antenna_tx == 2) /* TX: Antenna B */
reg_tx |= 0x02;
- }
+
+ /*
+ * Configure the RX antenna.
+ */
+ if (antenna_rx == 0) /* Diversity. */
+ reg_rx |= 0x02;
+ else if (antenna_rx == 1) /* RX: Antenna A */
+ reg_rx |= 0x00;
+ else if (antenna_rx == 2) /* RX: Antenna B */
+ reg_rx |= 0x04;
rt2x00_bbp_write(rt2x00dev, 4, reg_rx);
rt2x00_bbp_write(rt2x00dev, 1, reg_tx);
@@ -507,7 +507,7 @@ static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
/*
* Update active info for RX.
*/
- rt2x00dev->rx_params.antenna = antenna;
+ rt2x00dev->rx_params.antenna = antenna_rx;
}
static void rt2400pci_config_cw(struct rt2x00_dev *rt2x00dev,
@@ -1972,7 +1972,8 @@ static int rt2400pci_config(struct ieee80211_hw *hw,
rt2400pci_config_channel(rt2x00dev,
conf->channel_val, conf->channel, conf->freq);
rt2400pci_config_txpower(rt2x00dev, conf->power_level);
- rt2400pci_config_antenna(rt2x00dev, conf->antenna_sel);
+ rt2400pci_config_antenna(rt2x00dev,
+ conf->antenna_sel_tx, conf->antenna_sel_rx);
rt2400pci_config_duration(rt2x00dev,
(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME));
rt2400pci_config_phymode(rt2x00dev, conf->phymode);
@@ -2444,12 +2445,11 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Identify default antenna configuration.
- * Ralink devices have have antenna options for both TX as RX.
- * The ieee80211 stack currently only provide the user to set
- * 1 antenna, by default this is considered to be the TX antenna.
*/
- rt2x00dev->hw->conf.antenna_sel = rt2x00_get_field16(eeprom,
+ rt2x00dev->hw->conf.antenna_sel_tx = rt2x00_get_field16(eeprom,
EEPROM_ANTENNA_TX_DEFAULT);
+ rt2x00dev->hw->conf.antenna_sel_rx = rt2x00_get_field16(eeprom,
+ EEPROM_ANTENNA_RX_DEFAULT);
/*
* Store led mode, for correct led behaviour.
diff --git a/drivers/net/wireless/d80211/rt2x00/rt2500pci.c b/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
index 305cff6..aee6233 100644
--- a/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
@@ -509,7 +509,8 @@ static void rt2500pci_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower)
rt2x00dev->tx_power = txpower;
}
-static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
+static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev,
+ int antenna_tx, int antenna_rx)
{
u32 reg;
u8 reg_rx;
@@ -518,7 +519,7 @@ static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
/*
* Only continue when there is something to be done.
*/
- if (rt2x00dev->rx_params.antenna == antenna)
+ if (rt2x00dev->rx_params.antenna == antenna_rx)
return;
rt2x00_register_read(rt2x00dev, BBPCSR1, ®);
@@ -532,33 +533,33 @@ static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
reg_tx &= ~0x03;
/*
- * Ralink devices have have antenna options for both TX as RX.
- * The ieee80211 stack currently only provide the user to set
- * 1 antenna, by default this is considered to be the TX antenna.
+ * Configure the TX antenna.
*/
- if (antenna == 0) {
- /* Diversity. */
- reg_rx |= 0x02;
+ if (antenna_tx == 0) { /* Diversity. */
reg_tx |= 0x02;
rt2x00_set_field32(®, BBPCSR1_CCK, 2);
rt2x00_set_field32(®, BBPCSR1_OFDM, 2);
- } else if (antenna == 1) {
- /* RX: Antenna B */
- reg_rx |= 0x02;
- /* TX: Antenna A */
+ } else if (antenna_tx == 1) { /* TX: Antenna A */
reg_tx |= 0x00;
rt2x00_set_field32(®, BBPCSR1_CCK, 0);
rt2x00_set_field32(®, BBPCSR1_OFDM, 0);
- } else if (antenna == 2) {
- /* RX: Antenna A */
- reg_rx |= 0x00;
- /* TX: Antenna B */
+ } else if (antenna_tx == 2) { /* TX: Antenna B */
reg_tx |= 0x02;
rt2x00_set_field32(®, BBPCSR1_CCK, 2);
rt2x00_set_field32(®, BBPCSR1_OFDM, 2);
}
/*
+ * Configure the RX antenna.
+ */
+ if (antenna_rx == 0) /* Diversity. */
+ reg_rx |= 0x02;
+ else if (antenna_rx == 1) /* RX: Antenna A */
+ reg_rx |= 0x00;
+ else if (antenna_rx == 2) /* RX: Antenna B */
+ reg_rx |= 0x02;
+
+ /*
* RT2525E and RT5222 need to flip TX I/Q
*/
if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
@@ -584,7 +585,7 @@ static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
/*
* Update active info for RX.
*/
- rt2x00dev->rx_params.antenna = antenna;
+ rt2x00dev->rx_params.antenna = antenna_rx;
}
static void rt2500pci_config_duration(struct rt2x00_dev *rt2x00dev,
@@ -2137,7 +2138,8 @@ static int rt2500pci_config(struct ieee80211_hw *hw,
conf->channel_val, conf->channel, conf->freq,
conf->power_level);
rt2500pci_config_txpower(rt2x00dev, conf->power_level);
- rt2500pci_config_antenna(rt2x00dev, conf->antenna_sel);
+ rt2500pci_config_antenna(rt2x00dev,
+ conf->antenna_sel_tx, conf->antenna_sel_rx);
rt2500pci_config_duration(rt2x00dev,
(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME));
rt2500pci_config_phymode(rt2x00dev, conf->phymode);
@@ -2605,12 +2607,11 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Identify default antenna configuration.
- * Ralink devices have have antenna options for both TX as RX.
- * The ieee80211 stack currently only provide the user to set
- * 1 antenna, by default this is considered to be the TX antenna.
*/
- rt2x00dev->hw->conf.antenna_sel = rt2x00_get_field16(eeprom,
+ rt2x00dev->hw->conf.antenna_sel_tx = rt2x00_get_field16(eeprom,
EEPROM_ANTENNA_TX_DEFAULT);
+ rt2x00dev->hw->conf.antenna_sel_rx = rt2x00_get_field16(eeprom,
+ EEPROM_ANTENNA_RX_DEFAULT);
/*
* Store led mode, for correct led behaviour.
diff --git a/drivers/net/wireless/d80211/rt2x00/rt2500usb.c b/drivers/net/wireless/d80211/rt2x00/rt2500usb.c
index 0976c98..8caaadd 100644
--- a/drivers/net/wireless/d80211/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/d80211/rt2x00/rt2500usb.c
@@ -559,7 +559,8 @@ static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower)
rt2x00dev->tx_power = txpower;
}
-static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
+static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev,
+ int antenna_tx, int antenna_rx)
{
u8 reg_rx;
u8 reg_tx;
@@ -569,7 +570,7 @@ static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
/*
* Only continue when there is something to be done.
*/
- if (rt2x00dev->rx_params.antenna == antenna)
+ if (rt2x00dev->rx_params.antenna == antenna_rx)
return;
rt2x00_bbp_read(rt2x00dev, 2, ®_tx);
@@ -584,33 +585,33 @@ static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
reg_rx &= ~0x03;
/*
- * Ralink devices have have antenna options for both TX as RX.
- * The ieee80211 stack currently only provide the user to set
- * 1 antenna, by default this is considered to be the TX antenna.
+ * Configure the TX antenna.
*/
- if (antenna == 0) {
- /* Diversity. */
- reg_rx |= 0x01;
+ if (antenna_tx == 0) { /* Diversity. */
reg_tx |= 0x01;
rt2x00_set_field16(&csr5_reg, PHY_CSR5_CCK, 1);
rt2x00_set_field16(&csr6_reg, PHY_CSR6_OFDM, 1);
- } else if (antenna == 1) {
- /* RX: Antenna B */
- reg_rx |= 0x02;
- /* TX: Antenna A */
+ } else if (antenna_tx == 1) { /* TX: Antenna A */
reg_tx |= 0x00;
rt2x00_set_field16(&csr5_reg, PHY_CSR5_CCK, 0);
rt2x00_set_field16(&csr6_reg, PHY_CSR6_OFDM, 0);
- } else if (antenna == 2) {
- /* RX: Antenna A */
- reg_rx |= 0x00;
- /* TX: Antenna B */
+ } else if (antenna_tx == 2) { /* TX: Antenna B */
reg_tx |= 0x02;
rt2x00_set_field16(&csr5_reg, PHY_CSR5_CCK, 2);
rt2x00_set_field16(&csr6_reg, PHY_CSR6_OFDM, 2);
}
/*
+ * Configure the RX antenna.
+ */
+ if (antenna_rx == 0) /* Diversity. */
+ reg_rx |= 0x01;
+ else if (antenna_rx == 1) /* RX: Antenna A */
+ reg_rx |= 0x00;
+ else if (antenna_rx == 2) /* RX: Antenna B */
+ reg_rx |= 0x02;
+
+ /*
* RT2525E and RT5222 need to flip TX I/Q
*/
if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
@@ -637,7 +638,7 @@ static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev, int antenna)
/*
* Update active info for RX.
*/
- rt2x00dev->rx_params.antenna = antenna;
+ rt2x00dev->rx_params.antenna = antenna_rx;
}
static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev,
@@ -2073,7 +2074,8 @@ static int rt2500usb_config(struct ieee80211_hw *hw,
conf->channel_val, conf->channel, conf->freq,
conf->power_level);
rt2500usb_config_txpower(rt2x00dev, conf->power_level);
- rt2500usb_config_antenna(rt2x00dev, conf->antenna_sel);
+ rt2500usb_config_antenna(rt2x00dev,
+ conf->antenna_sel_tx, conf->antenna_sel_rx);
rt2500usb_config_duration(rt2x00dev,
(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME));
rt2500usb_config_phymode(rt2x00dev, conf->phymode);
@@ -2455,12 +2457,11 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Identify default antenna configuration.
- * Ralink devices have have antenna options for both TX as RX.
- * The ieee80211 stack currently only provide the user to set
- * 1 antenna, by default this is considered to be the TX antenna.
*/
- rt2x00dev->hw->conf.antenna_sel = rt2x00_get_field16(eeprom,
+ rt2x00dev->hw->conf.antenna_sel_tx = rt2x00_get_field16(eeprom,
EEPROM_ANTENNA_TX_DEFAULT);
+ rt2x00dev->hw->conf.antenna_sel_rx = rt2x00_get_field16(eeprom,
+ EEPROM_ANTENNA_RX_DEFAULT);
/*
* Store led mode, for correct led behaviour.
diff --git a/drivers/net/wireless/d80211/rt2x00/rt61pci.c b/drivers/net/wireless/d80211/rt2x00/rt61pci.c
index 547c660..51ada44 100644
--- a/drivers/net/wireless/d80211/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/d80211/rt2x00/rt61pci.c
@@ -677,7 +677,7 @@ static void rt61pci_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower)
}
static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev,
- int antenna, int phymode)
+ int antenna_tx, int antenna_rx, int phymode)
{
u32 reg;
u8 reg_r3;
@@ -688,7 +688,7 @@ static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev,
/*
* Only continue when there is something to be done.
*/
- if (rt2x00dev->rx_params.antenna == antenna)
+ if (rt2x00dev->rx_params.antenna == antenna_rx)
return;
rt2x00_register_read(rt2x00dev, PHY_CSR0, ®);
@@ -753,50 +753,40 @@ static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev,
if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
rt2x00_rf(&rt2x00dev->chip, RF5325)) {
- if (antenna == 0) {
- /* Diversity. */
+ if (antenna_rx == 0) { /* Diversity. */
reg_r4 |= 0x02;
if (phymode != MODE_IEEE80211A)
reg_r4 |= 0x20;
- } else if (antenna == 1) {
- /* RX: Antenna B */
- /* TX: Antenna A */
+ } else if (antenna_rx == 1) { /* RX: Antenna A */
reg_r4 |= 0x01;
if (phymode == MODE_IEEE80211A)
- reg_r77 |= 0x03;
- else
reg_r77 &= ~0x03;
+ else
+ reg_r77 |= 0x03;
rt2x00_bbp_write(rt2x00dev, 77, reg_r77);
- } else if (antenna == 2) {
- /* RX: Antenna A */
- /* TX: Antenna B */
+ } else if (antenna_rx == 2) { /* RX: Antenna B */
reg_r4 |= 0x01;
if (phymode == MODE_IEEE80211A)
- reg_r77 &= ~0x03;
- else
reg_r77 |= 0x03;
+ else
+ reg_r77 &= ~0x03;
rt2x00_bbp_write(rt2x00dev, 77, reg_r77);
}
} else if (rt2x00_rf(&rt2x00dev->chip, RF2527) ||
(rt2x00_rf(&rt2x00dev->chip, RF2529) &&
GET_FLAG(rt2x00dev, CONFIG_DOUBLE_ANTENNA))) {
- if (antenna == 0) {
- /* Diversity. */
+ if (antenna_rx == 0) { /* Diversity. */
reg_r4 |= 0x22;
reg_r4 &= frame_type;
- } else if (antenna == 1) {
- /* RX: Antenna B */
- /* TX: Antenna A */
+ } else if (antenna_rx == 1) { /* RX: Antenna A */
reg_r4 |= 0x21;
reg_r4 &= frame_type;
- reg_r77 &= ~0x03;
+ reg_r77 |= 0x03;
rt2x00_bbp_write(rt2x00dev, 77, reg_r77);
- } else if (antenna == 2) {
- /* RX: Antenna A */
- /* TX: Antenna B */
+ } else if (antenna_rx == 2) { /* RX: Antenna B */
reg_r4 |= 0x21;
reg_r4 &= frame_type;
- reg_r77 |= 0x03;
+ reg_r77 &= ~0x03;
rt2x00_bbp_write(rt2x00dev, 77, reg_r77);
}
}
@@ -813,7 +803,7 @@ static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev,
/*
* Update active info for RX.
*/
- rt2x00dev->rx_params.antenna = antenna;
+ rt2x00dev->rx_params.antenna = antenna_rx;
}
static void rt61pci_config_duration(struct rt2x00_dev *rt2x00dev,
@@ -2632,7 +2622,8 @@ static int rt61pci_config(struct ieee80211_hw *hw,
conf->channel_val, conf->channel, conf->freq,
conf->power_level);
rt61pci_config_txpower(rt2x00dev, conf->power_level);
- rt61pci_config_antenna(rt2x00dev, conf->antenna_sel, conf->phymode);
+ rt61pci_config_antenna(rt2x00dev,
+ conf->antenna_sel_tx, conf->antenna_sel_rx, conf->phymode);
rt61pci_config_duration(rt2x00dev,
(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME));
rt61pci_config_phymode(rt2x00dev, conf->phymode);
@@ -3095,12 +3086,11 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Identify default antenna configuration.
- * Ralink devices have have antenna options for both TX as RX.
- * The ieee80211 stack currently only provide the user to set
- * 1 antenna, by default this is considered to be the TX antenna.
*/
- rt2x00dev->hw->conf.antenna_sel = rt2x00_get_field16(eeprom,
+ rt2x00dev->hw->conf.antenna_sel_tx = rt2x00_get_field16(eeprom,
EEPROM_ANTENNA_TX_DEFAULT);
+ rt2x00dev->hw->conf.antenna_sel_rx = rt2x00_get_field16(eeprom,
+ EEPROM_ANTENNA_RX_DEFAULT);
/*
* Read the Frame type.
diff --git a/drivers/net/wireless/d80211/rt2x00/rt73usb.c b/drivers/net/wireless/d80211/rt2x00/rt73usb.c
index be66e2f..922b6f0 100644
--- a/drivers/net/wireless/d80211/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/d80211/rt2x00/rt73usb.c
@@ -586,7 +586,7 @@ static void rt73usb_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower)
}
static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev,
- int antenna, int phymode)
+ int antenna_tx, int antenna_rx, int phymode)
{
u32 reg;
u8 reg_r3;
@@ -597,7 +597,7 @@ static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev,
/*
* Only continue when there is something to be done.
*/
- if (rt2x00dev->rx_params.antenna == antenna)
+ if (rt2x00dev->rx_params.antenna == antenna_rx)
return;
rt2x00_register_read(rt2x00dev, PHY_CSR0, ®);
@@ -660,52 +660,42 @@ static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev,
if (rt2x00_rf(&rt2x00dev->chip, RF5226) ||
rt2x00_rf(&rt2x00dev->chip, RF5225)) {
- if (antenna == 0) {
- /* Diversity. */
+ if (antenna_rx == 0) { /* Diversity. */
reg_r4 |= 0x02;
if (phymode != MODE_IEEE80211A)
reg_r4 |= 0x20;
reg_r4 &= frame_type;
- } else if (antenna == 1) {
- /* RX: Antenna B */
- /* TX: Antenna A */
+ } else if (antenna_rx == 1) { /* RX: Antenna A */
reg_r4 |= 0x01;
reg_r4 &= frame_type;
if (phymode == MODE_IEEE80211A)
- reg_r77 |= 0x03;
- else
reg_r77 &= ~0x03;
+ else
+ reg_r77 |= 0x03;
rt2x00_bbp_write(rt2x00dev, 77, reg_r77);
- } else if (antenna == 2) {
- /* RX: Antenna A */
- /* TX: Antenna B */
+ } else if (antenna_rx == 2) { /* RX: Antenna B */
reg_r4 |= 0x01;
reg_r4 &= frame_type;
if (phymode == MODE_IEEE80211A)
- reg_r77 &= ~0x03;
- else
reg_r77 |= 0x03;
+ else
+ reg_r77 &= ~0x03;
rt2x00_bbp_write(rt2x00dev, 77, reg_r77);
}
} else if (rt2x00_rf(&rt2x00dev->chip, RF2528) ||
rt2x00_rf(&rt2x00dev->chip, RF2527)) {
- if (antenna == 0) {
- /* Diversity. */
+ if (antenna_rx == 0) { /* Diversity. */
reg_r4 |= 0x22;
reg_r4 &= frame_type;
- } else if (antenna == 1) {
- /* RX: Antenna B */
- /* TX: Antenna A */
+ } else if (antenna_rx == 1) { /* RX: Antenna A */
reg_r4 |= 0x21;
reg_r4 &= frame_type;
- reg_r77 &= ~0x03;
+ reg_r77 |= 0x03;
rt2x00_bbp_write(rt2x00dev, 77, reg_r77);
- } else if (antenna == 2) {
- /* RX: Antenna A */
- /* TX: Antenna B */
+ } else if (antenna_rx == 2) { /* RX: Antenna B */
reg_r4 |= 0x21;
reg_r4 &= frame_type;
- reg_r77 |= 0x03;
+ reg_r77 &= ~0x03;
rt2x00_bbp_write(rt2x00dev, 77, reg_r77);
}
}
@@ -716,7 +706,7 @@ static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev,
/*
* Update active info for RX.
*/
- rt2x00dev->rx_params.antenna = antenna;
+ rt2x00dev->rx_params.antenna = antenna_rx;
}
static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev,
@@ -2344,7 +2334,8 @@ static int rt73usb_config(struct ieee80211_hw *hw,
conf->channel_val, conf->channel, conf->freq,
conf->power_level);
rt73usb_config_txpower(rt2x00dev, conf->power_level);
- rt73usb_config_antenna(rt2x00dev, conf->antenna_sel, conf->phymode);
+ rt73usb_config_antenna(rt2x00dev,
+ conf->antenna_sel_tx, conf->antenna_sel_rx, conf->phymode);
rt73usb_config_duration(rt2x00dev,
(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME));
rt73usb_config_phymode(rt2x00dev, conf->phymode);
@@ -2770,12 +2761,11 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Identify default antenna configuration.
- * Ralink devices have have antenna options for both TX as RX.
- * The ieee80211 stack currently only provide the user to set
- * 1 antenna, by default this is considered to be the TX antenna.
*/
- rt2x00dev->hw->conf.antenna_sel = rt2x00_get_field16(eeprom,
+ rt2x00dev->hw->conf.antenna_sel_tx = rt2x00_get_field16(eeprom,
EEPROM_ANTENNA_TX_DEFAULT);
+ rt2x00dev->hw->conf.antenna_sel_rx = rt2x00_get_field16(eeprom,
+ EEPROM_ANTENNA_RX_DEFAULT);
/*
* Read the Frame type.
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 3/3] d80211: Split antenna selection into TX and RX antenna
2007-02-23 16:39 ` Ivo van Doorn
@ 2007-02-26 1:18 ` John W. Linville
2007-02-26 9:26 ` Ivo Van Doorn
0 siblings, 1 reply; 5+ messages in thread
From: John W. Linville @ 2007-02-26 1:18 UTC (permalink / raw)
To: Ivo van Doorn; +Cc: Jiri Benc, Michael Buesch, linux-wireless
On Fri, Feb 23, 2007 at 05:39:04PM +0100, Ivo van Doorn wrote:
> Sorry about that, I had renamed rx_params to rx_status in my cvs tree and hadn't set that
> correctly to the git tree yet. I'll try to update rt2x00 inside wireless-dev as soon as possible,
> but in the mean time here is the correct patch.
Since you brought it up... :-)
It would be a big help if rt2x00 could keep upstream in-sync with your
current developments. FWIW, I expect wireless-dev to get picked-up
in -mm soon, and Fedora has it in rawhide already. So, it is in your
own best interest to make sure that we have the latest fixes here,
unless you want to support two different versions... :-)
Thanks!
John
--
John W. Linville
linville@tuxdriver.com
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 3/3] d80211: Split antenna selection into TX and RX antenna
2007-02-26 1:18 ` John W. Linville
@ 2007-02-26 9:26 ` Ivo Van Doorn
0 siblings, 0 replies; 5+ messages in thread
From: Ivo Van Doorn @ 2007-02-26 9:26 UTC (permalink / raw)
To: John W. Linville; +Cc: Jiri Benc, Michael Buesch, linux-wireless
Hi,
> > Sorry about that, I had renamed rx_params to rx_status in my cvs tree and hadn't set that
> > correctly to the git tree yet. I'll try to update rt2x00 inside wireless-dev as soon as possible,
> > but in the mean time here is the correct patch.
>
> Since you brought it up... :-)
>
> It would be a big help if rt2x00 could keep upstream in-sync with your
> current developments. FWIW, I expect wireless-dev to get picked-up
> in -mm soon, and Fedora has it in rawhide already. So, it is in your
> own best interest to make sure that we have the latest fixes here,
> unless you want to support two different versions... :-)
True true, I am terribly late with updating rt2x00 in the wireless-dev tree. :(
I'll try to send several patches this week, I am not sure if that will be entire
update because some changes are quite big.
Although I should note that rt2x00 still isn't stable, rt61pci and rt73usb seem
to be problematic in the sense that they still fail to associate or
manage to associate
only for a second before being disassociated again. The other drivers
in rt2x00 also
show various problematic behavior with suspend/resume, running
ifconfig down followed
by ifconfig up, monitor mode that isn't picking up everything,
scanning that only picks
up the strongest signals (Even APs that are a few meters away are
sometimes not detected.) etc. etc.
Ivo
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2007-02-26 9:26 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-02-21 16:02 [PATCH 3/3] d80211: Split antenna selection into TX and RX antenna Ivo van Doorn
2007-02-23 16:28 ` Jiri Benc
2007-02-23 16:39 ` Ivo van Doorn
2007-02-26 1:18 ` John W. Linville
2007-02-26 9:26 ` Ivo Van Doorn
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.