* Re: 2.6.21-rc5-mm3
2007-03-30 8:05 2.6.21-rc5-mm3 Andrew Morton
@ 2007-03-30 11:00 ` Rafael J. Wysocki
2007-03-30 16:31 ` 2.6.21-rc5-mm3 Michal Piotrowski
` (10 subsequent siblings)
11 siblings, 0 replies; 60+ messages in thread
From: Rafael J. Wysocki @ 2007-03-30 11:00 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Friday, 30 March 2007 10:05, Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm3/
>
> - git-cryptodev has things in it again
>
> - Re-added git-e1000: a large amount of e1000 driver work
>
> - git-net has a huge amount of material in it, but I dropped it because it
> went oops.
>
> - git-block is back, minus the problematic unplugging rework.
>
> - Lots of x86 updates.
>
> - lguest is being redone and has been dropped
>
> - The IDE development tree has been restored
On my system (x86_64) 'make install_modules' produces a lot of warning messages:
if [ -r System.map -a -x /sbin/depmod ]; then /sbin/depmod -ae -F System.map 2.6.21-rc5-mm3; fi
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol __nf_ct_l4proto_find
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol nf_conntrack_find_get
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol nf_conntrack_l4proto_register
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol nf_conntrack_l4proto_udp6
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol nf_conntrack_checksum
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol __nfa_fill
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol nf_ct_get_tuple
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol __nf_ct_event_cache_init
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol nf_conntrack_l3proto_register
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol nf_ct_log_invalid
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol nf_conntrack_l4proto_tcp6
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol need_conntrack
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol nf_conntrack_l4proto_unregister
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol per_cpu__nf_conntrack_stat
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol __nf_conntrack_confirm
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol nf_ct_invert_tuple
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol per_cpu__nf_conntrack_ecache
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol nf_conntrack_l3proto_unregister
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol nf_ct_deliver_cached_events
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol __nf_ct_refresh_acct
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko needs unknown symbol nf_conntrack_in
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_rt.ko needs unknown symbol xt_register_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_rt.ko needs unknown symbol xt_unregister_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_owner.ko needs unknown symbol xt_register_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_owner.ko needs unknown symbol xt_unregister_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_mh.ko needs unknown symbol xt_register_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_mh.ko needs unknown symbol xt_unregister_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_ipv6header.ko needs unknown symbol xt_register_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_ipv6header.ko needs unknown symbol xt_unregister_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_hl.ko needs unknown symbol xt_register_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_hl.ko needs unknown symbol xt_unregister_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_hbh.ko needs unknown symbol xt_unregister_matches
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_hbh.ko needs unknown symbol xt_register_matches
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_frag.ko needs unknown symbol xt_register_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_frag.ko needs unknown symbol xt_unregister_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_eui64.ko needs unknown symbol xt_register_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_eui64.ko needs unknown symbol xt_unregister_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_ah.ko needs unknown symbol xt_register_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_ah.ko needs unknown symbol xt_unregister_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_REJECT.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_REJECT.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_LOG.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_LOG.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_HL.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6t_HL.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6_tables.ko needs unknown symbol xt_free_table_info
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6_tables.ko needs unknown symbol xt_register_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6_tables.ko needs unknown symbol xt_find_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6_tables.ko needs unknown symbol xt_alloc_table_info
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6_tables.ko needs unknown symbol xt_check_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6_tables.ko needs unknown symbol xt_unregister_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6_tables.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6_tables.ko needs unknown symbol xt_register_table
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6_tables.ko needs unknown symbol xt_proto_init
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6_tables.ko needs unknown symbol xt_replace_table
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6_tables.ko needs unknown symbol xt_find_table_lock
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6_tables.ko needs unknown symbol xt_table_unlock
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6_tables.ko needs unknown symbol xt_proto_fini
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6_tables.ko needs unknown symbol xt_check_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6_tables.ko needs unknown symbol xt_find_revision
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6_tables.ko needs unknown symbol xt_unregister_table
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6_tables.ko needs unknown symbol xt_find_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv6/netfilter/ip6_tables.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_tftp.ko needs unknown symbol nf_conntrack_expect_related
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_tftp.ko needs unknown symbol nf_nat_tftp_hook
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_snmp_basic.ko needs unknown symbol nf_conntrack_helper_unregister
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_snmp_basic.ko needs unknown symbol nf_conntrack_helper_register
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_sip.ko needs unknown symbol nf_nat_sdp_hook
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_sip.ko needs unknown symbol nf_conntrack_expect_related
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_sip.ko needs unknown symbol nf_nat_sip_hook
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_sip.ko needs unknown symbol nf_conntrack_unexpect_related
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_sip.ko needs unknown symbol ct_sip_get_info
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_pptp.ko needs unknown symbol nf_nat_pptp_hook_exp_gre
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_pptp.ko needs unknown symbol nf_conntrack_expect_find_get
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_pptp.ko needs unknown symbol nf_nat_pptp_hook_inbound
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_pptp.ko needs unknown symbol nf_nat_pptp_hook_outbound
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_pptp.ko needs unknown symbol nf_conntrack_expect_put
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_pptp.ko needs unknown symbol nf_nat_pptp_hook_expectfn
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_pptp.ko needs unknown symbol nf_conntrack_unexpect_related
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_irc.ko needs unknown symbol nf_conntrack_expect_related
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_irc.ko needs unknown symbol nf_nat_irc_hook
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_irc.ko needs unknown symbol nf_conntrack_unexpect_related
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_h323.ko needs unknown symbol nat_callforwarding_hook
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_h323.ko needs unknown symbol nat_t120_hook
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_h323.ko needs unknown symbol set_h225_addr_hook
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_h323.ko needs unknown symbol set_ras_addr_hook
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_h323.ko needs unknown symbol nat_q931_hook
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_h323.ko needs unknown symbol nat_rtp_rtcp_hook
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_h323.ko needs unknown symbol nf_conntrack_expect_related
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_h323.ko needs unknown symbol nf_conntrack_unexpect_related
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_h323.ko needs unknown symbol set_sig_addr_hook
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_h323.ko needs unknown symbol get_h225_addr
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_h323.ko needs unknown symbol nat_h245_hook
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_h323.ko needs unknown symbol set_h245_addr_hook
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_ftp.ko needs unknown symbol nf_nat_ftp_hook
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_ftp.ko needs unknown symbol nf_conntrack_expect_related
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat_ftp.ko needs unknown symbol nf_conntrack_unexpect_related
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat.ko needs unknown symbol __nf_ct_l4proto_find
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat.ko needs unknown symbol nf_ct_invert_tuplepr
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat.ko needs unknown symbol nf_ct_l3proto_put
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat.ko needs unknown symbol __nfa_fill
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat.ko needs unknown symbol nf_conntrack_tcp_update
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat.ko needs unknown symbol nf_ct_get_tuple
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat.ko needs unknown symbol nf_conntrack_untracked
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat.ko needs unknown symbol nf_ct_l3proto_find_get
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat.ko needs unknown symbol nf_conntrack_tuple_taken
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat.ko needs unknown symbol nf_conntrack_htable_size
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat.ko needs unknown symbol nf_ct_iterate_cleanup
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat.ko needs unknown symbol nf_conntrack_alter_reply
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_nat.ko needs unknown symbol nf_conntrack_destroyed
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol __nf_ct_l4proto_find
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_conntrack_find_get
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_conntrack_l4proto_register
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_conntrack_checksum
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol __nfa_fill
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_ct_get_tuple
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_conntrack_l4proto_udp4
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol __nf_ct_event_cache_init
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_conntrack_l3proto_register
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_conntrack_max
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_ct_log_invalid
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_ct_l3protos
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol need_conntrack
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_conntrack_htable_size
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_conntrack_expect_list
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_conntrack_l4proto_unregister
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol per_cpu__nf_conntrack_stat
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_conntrack_count
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol __nf_conntrack_confirm
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_ct_invert_tuple
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol print_tuple
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol per_cpu__nf_conntrack_ecache
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_conntrack_lock
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_conntrack_l3proto_unregister
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_conntrack_l4proto_tcp4
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_ct_deliver_cached_events
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_conntrack_hash
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol __nf_ct_refresh_acct
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_conntrack_l3proto_generic
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko needs unknown symbol nf_conntrack_in
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/iptable_nat.ko needs unknown symbol nf_conntrack_untracked
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/iptable_nat.ko needs unknown symbol need_conntrack
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/iptable_nat.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/iptable_nat.ko needs unknown symbol nf_conntrack_unregister_cache
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/iptable_nat.ko needs unknown symbol nf_conntrack_register_cache
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/iptable_nat.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_ttl.ko needs unknown symbol xt_register_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_ttl.ko needs unknown symbol xt_unregister_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_tos.ko needs unknown symbol xt_register_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_tos.ko needs unknown symbol xt_unregister_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_recent.ko needs unknown symbol xt_register_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_recent.ko needs unknown symbol xt_unregister_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_owner.ko needs unknown symbol xt_register_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_owner.ko needs unknown symbol xt_unregister_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_iprange.ko needs unknown symbol xt_register_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_iprange.ko needs unknown symbol xt_unregister_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_ecn.ko needs unknown symbol xt_register_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_ecn.ko needs unknown symbol xt_unregister_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_ah.ko needs unknown symbol xt_register_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_ah.ko needs unknown symbol xt_unregister_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_addrtype.ko needs unknown symbol xt_register_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_addrtype.ko needs unknown symbol xt_unregister_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_ULOG.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_ULOG.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_TTL.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_TTL.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_TOS.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_TOS.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_SAME.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_SAME.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_REJECT.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_REJECT.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_REDIRECT.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_REDIRECT.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_NETMAP.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_NETMAP.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko needs unknown symbol nf_ct_iterate_cleanup
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_LOG.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_LOG.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_ECN.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_ECN.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_CLUSTERIP.ko needs unknown symbol nf_ct_l3proto_module_put
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_CLUSTERIP.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_CLUSTERIP.ko needs unknown symbol nf_ct_l3proto_try_module_get
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ipt_CLUSTERIP.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_compat_unlock
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_free_table_info
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_register_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_find_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_alloc_table_info
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_check_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_compat_match_from_user
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_unregister_match
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_compat_target_from_user
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_compat_match_to_user
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_register_table
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_proto_init
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_replace_table
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_find_table_lock
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_compat_target_offset
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_table_unlock
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_proto_fini
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_compat_target_to_user
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_compat_match_offset
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_check_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_find_revision
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_compat_lock
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_unregister_table
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_find_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/ip_tables.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/arpt_mangle.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/arpt_mangle.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/arp_tables.ko needs unknown symbol xt_free_table_info
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/arp_tables.ko needs unknown symbol xt_alloc_table_info
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/arp_tables.ko needs unknown symbol xt_register_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/arp_tables.ko needs unknown symbol xt_register_table
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/arp_tables.ko needs unknown symbol xt_proto_init
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/arp_tables.ko needs unknown symbol xt_replace_table
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/arp_tables.ko needs unknown symbol xt_find_table_lock
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/arp_tables.ko needs unknown symbol xt_table_unlock
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/arp_tables.ko needs unknown symbol xt_proto_fini
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/arp_tables.ko needs unknown symbol xt_check_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/arp_tables.ko needs unknown symbol xt_find_revision
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/arp_tables.ko needs unknown symbol xt_unregister_table
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/arp_tables.ko needs unknown symbol xt_find_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/net/ipv4/netfilter/arp_tables.ko needs unknown symbol xt_unregister_target
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol xdr_decode_string_inplace
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol rpc_shutdown_client
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol auth_domain_find
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol svc_recv
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol xdr_inline_decode
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol svc_reserve
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol svc_max_payload
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol svc_exit_thread
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol xdr_encode_opaque
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol svc_proc_register
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol cache_purge
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol nfsd_debug
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol qword_add
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol cache_unregister
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol svc_set_num_threads
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol svc_process
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol unix_domain_find
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol rpcauth_lookup_credcache
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol qword_addhex
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol qword_get
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol svc_create_pooled
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol xdr_init_decode
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol auth_unix_forget_old
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol sunrpc_cache_lookup
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol svc_sock_names
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol rpc_create
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol svc_destroy
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol svcauth_unix_purge
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol rpc_call_sync
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol auth_unix_add_addr
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol cache_check
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol svc_makesock
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol svc_set_client
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol rpciod_up
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol xdr_reserve_space
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol rpciod_down
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol cache_register
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol svc_seq_show
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol cache_flush
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol svc_proc_unregister
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol put_rpccred
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol svc_addsock
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol svc_print_addr
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol auth_unix_lookup
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol rpc_call_async
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol xdr_init_encode
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol sunrpc_cache_update
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfsd/nfsd.ko needs unknown symbol auth_domain_put
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs_common/nfs_acl.ko needs unknown symbol xdr_decode_array2
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs_common/nfs_acl.ko needs unknown symbol xdr_encode_word
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs_common/nfs_acl.ko needs unknown symbol xdr_encode_array2
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs_common/nfs_acl.ko needs unknown symbol xdr_decode_word
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_put_task
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_new_task
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_proc_register
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_wake_up_task
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol xdr_write_pages
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_shutdown_client
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol svc_recv
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol xdr_inline_decode
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_mkpipe
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_wake_up
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol svc_exit_thread
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol xdr_encode_opaque
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol xdr_read_pages
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol xdr_encode_opaque_fixed
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_sleep_on
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_run_task
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_init_task
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_print_iostats
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol xdr_enter_page
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol xdr_encode_pages
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol __rpc_wait_for_completion_task
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_setbufsize
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_clnt_sigmask
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_clone_client
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol svc_process
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol xdr_init_decode
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_max_payload
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_proc_unregister
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_exit_task
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_bind_new_program
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_create
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol svc_destroy
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol svc_create
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_call_sync
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_queue_upcall
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_delay
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol svc_makesock
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol svc_create_thread
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_execute
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpciod_up
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol xdr_reserve_space
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_clnt_sigunmask
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpcauth_lookupcred
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpciod_down
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_restart_call
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol xdr_inline_pages
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_call_setup
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_init_wait_queue
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol put_rpccred
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_unlink
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol svc_print_addr
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpc_call_async
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol rpcauth_create
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol xdr_init_encode
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol nfs_debug
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/nfs/nfs.ko needs unknown symbol xdr_shift_buf
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol svc_wake_up
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol xdr_decode_string_inplace
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol svc_recv
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol rpc_peeraddr
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol svc_exit_thread
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol xdr_encode_netobj
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol svc_process
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol nlm_debug
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol rpc_create
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol svc_destroy
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol svc_create
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol rpc_call_sync
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol rpc_delay
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol svc_makesock
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol svc_create_thread
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol svc_set_client
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol rpciod_up
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol rpciod_down
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol rpc_force_rebind
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol rpc_restart_call
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol xdr_encode_string
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol xdr_decode_netobj
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol svc_print_addr
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol rpc_call_async
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/fs/lockd/lockd.ko needs unknown symbol rpc_destroy_client
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/drivers/net/wireless/mac80211/bcm43xx/bcm43xx-mac80211.ko needs unknown symbol ieee80211_free_hw
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/drivers/net/wireless/mac80211/bcm43xx/bcm43xx-mac80211.ko needs unknown symbol ieee80211_alloc_hw
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/drivers/net/wireless/mac80211/bcm43xx/bcm43xx-mac80211.ko needs unknown symbol ieee80211_register_hw
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/drivers/net/wireless/mac80211/bcm43xx/bcm43xx-mac80211.ko needs unknown symbol ieee80211_wake_queue
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/drivers/net/wireless/mac80211/bcm43xx/bcm43xx-mac80211.ko needs unknown symbol ieee80211_tx_status_irqsafe
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/drivers/net/wireless/mac80211/bcm43xx/bcm43xx-mac80211.ko needs unknown symbol ieee80211_ctstoself_get
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/drivers/net/wireless/mac80211/bcm43xx/bcm43xx-mac80211.ko needs unknown symbol ieee80211_start_queues
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/drivers/net/wireless/mac80211/bcm43xx/bcm43xx-mac80211.ko needs unknown symbol ieee80211_stop_queue
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/drivers/net/wireless/mac80211/bcm43xx/bcm43xx-mac80211.ko needs unknown symbol ieee80211_stop_queues
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/drivers/net/wireless/mac80211/bcm43xx/bcm43xx-mac80211.ko needs unknown symbol ieee80211_get_hdrlen
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/drivers/net/wireless/mac80211/bcm43xx/bcm43xx-mac80211.ko needs unknown symbol ieee80211_unregister_hw
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/drivers/net/wireless/mac80211/bcm43xx/bcm43xx-mac80211.ko needs unknown symbol ieee80211_rts_get
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/drivers/net/wireless/mac80211/bcm43xx/bcm43xx-mac80211.ko needs unknown symbol ieee80211_register_hwmode
WARNING: /lib/modules/2.6.21-rc5-mm3/kernel/drivers/net/wireless/mac80211/bcm43xx/bcm43xx-mac80211.ko needs unknown symbol ieee80211_rx_irqsafe
^ permalink raw reply [flat|nested] 60+ messages in thread* Re: 2.6.21-rc5-mm3
2007-03-30 8:05 2.6.21-rc5-mm3 Andrew Morton
2007-03-30 11:00 ` 2.6.21-rc5-mm3 Rafael J. Wysocki
@ 2007-03-30 16:31 ` Michal Piotrowski
2007-03-30 16:55 ` 2.6.21-rc5-mm3 Ingo Molnar
2007-03-30 16:38 ` 2.6.21-rc5-mm3 Dmitry Torokhov
` (9 subsequent siblings)
11 siblings, 1 reply; 60+ messages in thread
From: Michal Piotrowski @ 2007-03-30 16:31 UTC (permalink / raw)
To: Andrew Morton; +Cc: Ingo Molnar, Thomas Gleixner, linux-kernel
On 30/03/07, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm3/
>
It's my lucky Friday, kernel hangs shortly after
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Adding info for No Bus:rtc
Real Time Clock Driver v1.12ac
due to
GOOD
mm-only-hrtimers-debug-patch.patch
mm-only-hrtimers-debug-patch-fix.patch
BAD
patches. Both patches works fine for me in vanilla tree.
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.21-rc5-mm3/mm-config
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.21-rc5-mm3/mm-console.log
Regards,
Michal
--
Michal K. K. Piotrowski
LTG - Linux Testers Group (PL)
(http://www.stardust.webpages.pl/ltg/)
LTG - Linux Testers Group (EN)
(http://www.stardust.webpages.pl/linux_testers_group_en/)
^ permalink raw reply [flat|nested] 60+ messages in thread* Re: 2.6.21-rc5-mm3
2007-03-30 16:31 ` 2.6.21-rc5-mm3 Michal Piotrowski
@ 2007-03-30 16:55 ` Ingo Molnar
2007-03-30 17:19 ` 2.6.21-rc5-mm3 Michal Piotrowski
0 siblings, 1 reply; 60+ messages in thread
From: Ingo Molnar @ 2007-03-30 16:55 UTC (permalink / raw)
To: Michal Piotrowski; +Cc: Andrew Morton, Thomas Gleixner, linux-kernel
* Michal Piotrowski <michal.k.k.piotrowski@gmail.com> wrote:
> It's my lucky Friday, kernel hangs shortly after
>
> PM: Removing info for No Bus:vcsa1
> PM: Adding info for No Bus:vcs1
> PM: Adding info for No Bus:vcsa1
> PM: Removing info for No Bus:vcs1
> PM: Removing info for No Bus:vcsa1
> PM: Adding info for No Bus:vcs1
> PM: Adding info for No Bus:vcsa1
> PM: Adding info for No Bus:rtc
> Real Time Clock Driver v1.12ac
>
> due to
>
> GOOD
> mm-only-hrtimers-debug-patch.patch
> mm-only-hrtimers-debug-patch-fix.patch
> BAD
>
> patches. Both patches works fine for me in vanilla tree.
hm. now that's a mystery ... Any way to figure out where it hangs?
nmi_watchdog=1/2, softlockup, etc?
Ingo
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3
2007-03-30 16:55 ` 2.6.21-rc5-mm3 Ingo Molnar
@ 2007-03-30 17:19 ` Michal Piotrowski
0 siblings, 0 replies; 60+ messages in thread
From: Michal Piotrowski @ 2007-03-30 17:19 UTC (permalink / raw)
To: Ingo Molnar
Cc: Michal Piotrowski, Andrew Morton, Thomas Gleixner, linux-kernel
Ingo Molnar napisał(a):
> * Michal Piotrowski <michal.k.k.piotrowski@gmail.com> wrote:
>
>> It's my lucky Friday, kernel hangs shortly after
>>
>> PM: Removing info for No Bus:vcsa1
>> PM: Adding info for No Bus:vcs1
>> PM: Adding info for No Bus:vcsa1
>> PM: Removing info for No Bus:vcs1
>> PM: Removing info for No Bus:vcsa1
>> PM: Adding info for No Bus:vcs1
>> PM: Adding info for No Bus:vcsa1
>> PM: Adding info for No Bus:rtc
>> Real Time Clock Driver v1.12ac
>>
>> due to
>>
>> GOOD
>> mm-only-hrtimers-debug-patch.patch
>> mm-only-hrtimers-debug-patch-fix.patch
>> BAD
>>
>> patches. Both patches works fine for me in vanilla tree.
>
> hm. now that's a mystery ... Any way to figure out where it hangs?
> nmi_watchdog=1/2, softlockup, etc?
>
> Ingo
>
nmi_watchdog=1 boots fine
nmi_watchdog=2 shows this
BUG: NMI Watchdog detected LOCKUP on CPU0, eip c014ce9c, registers:
Modules linked in: ide_cd cdrom rtc unix
CPU: 0
EIP: 0060:[<c014ce9c>] Not tainted VLI
EFLAGS: 00000093 (2.6.21-rc5-mm3 #10)
EIP is at read_pointer+0x49/0x2d8
eax: c7a8dd04 ebx: 00000000 ecx: 00000000 edx: c043d19c
esi: c043d184 edi: c043d19c ebp: c7a8dbf4 esp: c7a8dbbc
ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
Process udevd (pid: 864, ti=c7a8c000 task=c97cd4d0 task.ti=c7a8c000)
Stack: 0000000b c7a8dc70 c7a8dbf4 c014d6d0 c7a8dd04 c043e454 c7a8dbf4 c011fdd1
c043e404 c043e454 c043d190 0005cd94 c043d184 c7a8dd04 c7a8dd14 c014dd3a
00000000 00000000 00000000 00000000 c7a8df44 c7a8dd74 c741eefb 00000008
Call Trace:
[<c014dd3a>] unwind+0x414/0xfa2
[<c010510d>] dump_trace_unwind+0xb4/0xe5
[<c014ce4d>] unwind_init_running+0x25/0x2b
[<c01051a1>] dump_trace+0x63/0x1eb
[<c010ad39>] save_stack_trace+0x23/0x42
[<c01393c9>] update_cpu_base_expires_next+0x56/0x5a
[<c013a475>] hrtimer_interrupt+0x17c/0x1b8
[<c0115e8e>] smp_apic_timer_interrupt+0x72/0x85
[<c0104bef>] apic_timer_interrupt+0x33/0x38
[<c014320c>] lock_release+0x1d2/0x1da
[<c013a7ef>] up_read+0x19/0x2e
[<c011b800>] do_page_fault+0x28f/0x55b
[<c034d191>] error_code+0x79/0x80
[<c020c23e>] __put_user_4+0x12/0x18
DWARF2 unwinder stuck at __put_user_4+0x12/0x18
Leftover inexact backtrace:
[<c01040d6>] ret_from_fork+0x6/0x1c
=======================
Code: a8 47 83 c0 00 0f 84 a3 02 00 00 8b 55 d8 8b 02 89 7c 24 0c 89 44 24 08 89 5c 24 04 c7 04 24 7c 54 3f c0 e9 75 02 00 00 8b 45 d8 <8b> 08 89 4d f0 89 d8 83 e0 07 83 f8 01 74 7f 7f 04 85 c0 eb 08
l *0xc014ce9c
0xc014ce9c is in read_pointer (/mnt/md0/devel/linux-mm/kernel/unwind.c:526).
521
522 if (ptrType < 0 || ptrType == DW_EH_PE_omit) {
523 dprintk(1, "Invalid pointer encoding %02X (%p,%p).", ptrType, *pLoc, end);
524 return 0;
525 }
526 ptr.p8 = *pLoc;
527 switch(ptrType & DW_EH_PE_FORM) {
528 case DW_EH_PE_data2:
529 if (end < (const void *)(ptr.p16u + 1)) {
530 dprintk(1, "Data16 overrun (%p,%p).", ptr.p8, end);
UNWIND_INFO stuff
BUG: NMI Watchdog detected LOCKUP<0>Kernel panic - not syncing: Aiee, killing interrupt handler!
on CPU1, eip c014cd37, registers:
Modules linked in: ide_cd cdrom rtc unix
CPU: 1
EIP: 0060:[<c014cd37>] Not tainted VLI
EFLAGS: 00000012 (2.6.21-rc5-mm3 #10)
EIP is at cie_for_fde+0x45/0x65
eax: 0001c260 ebx: c04431f4 ecx: 0001c264 edx: 00000010
esi: c04431f8 edi: c97f7da4 ebp: c97f7c94 esp: c97f7c8c
ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
Process udevd (pid: 843, ti=c97f6000 task=c97f2ac0 task.ti=c97f6000)
Stack: 0003aac0 c045f458 c97f7db4 c014dd93 00000000 00000000 c97f3014 000001cc
c97f7f0c c97f7e14 c741eefb 00000008 c97f7f0c c04431f8 c020c184 c97f7f0c
c97f7f44 c97f7f44 00000000 00000008 c0834780 00000000 c97f7d34 c0142dc8
Call Trace:
[<c014dd93>] unwind+0x46d/0xfa2
[<c010510d>] dump_trace_unwind+0xb4/0xe5
[<c014ce4d>] unwind_init_running+0x25/0x2b
[<c01051a1>] dump_trace+0x63/0x1eb
[<c010ad39>] save_stack_trace+0x23/0x42
[<c01393c9>] update_cpu_base_expires_next+0x56/0x5a
[<c013a475>] hrtimer_interrupt+0x17c/0x1b8
[<c0115e8e>] smp_apic_timer_interrupt+0x72/0x85
[<c0104bef>] apic_timer_interrupt+0x33/0x38
[<c020c184>] __get_user_4+0x14/0x17
DWARF2 unwinder stuck at __get_user_4+0x14/0x17
Leftover inexact backtrace:
[<c018b42f>] do_execve+0xdd/0x210
[<c0102497>] sys_execve+0x3f/0x62
[<c01041c2>] sysenter_past_esp+0x5f/0x99
=======================
Code: c9 74 42 f6 c1 03 75 3b b8 04 00 00 00 2b 42 10 01 d8 39 c1 77 2d 89 c8 83 e0 fc 29 c3 8d 73 04 8b 53 04 83 fa 08 76 1b 8d 41 fc <39> c2 73 14 80 e2 03 75 0f 83 7e 04 00 74 0b eb 07 be ac 47 83
l *0xc014cd37
0xc014cd37 is in cie_for_fde (/mnt/md0/devel/linux-mm/kernel/unwind.c:498).
493 return ¬_fde; /* this is a CIE */
494 if ((fde[1] & (sizeof(*fde) - 1))
495 || fde[1] > (unsigned long)(fde + 1) - (unsigned long)table->address)
496 return NULL; /* this is not a valid FDE */
497 cie = fde + 1 - fde[1] / sizeof(*fde);
498 if (*cie <= sizeof(*cie) + 4
499 || *cie >= fde[1] - sizeof(*fde)
500 || (*cie & (sizeof(*cie) - 1))
501 || cie[1])
502 return NULL; /* this is not a (valid) CIE */
UNWIND_INFO stuff
BUG: sleeping function called from invalid context at /mnt/md0/devel/linux-mm/drivers/char/vt.c:3409
in_atomic():1, irqs_disabled():1
no locks held by udevd/843.
irq event stamp: 186
hardirqs last enabled at (185): [<c0141e40>] debug_check_no_locks_freed+0x123/0x12d
hardirqs last disabled at (186): [<c0104be5>] apic_timer_interrupt+0x29/0x38
softirqs last enabled at (0): [<c0123442>] copy_process+0x534/0x138b
softirqs last disabled at (0): [<00000000>] 0x0
l *0xc0141e40
0xc0141e40 is in debug_check_no_locks_freed (include2/asm/irqflags.h:24).
19 return f;
20 }
21
22 static inline void native_restore_fl(unsigned long f)
23 {
24 asm volatile("pushl %0 ; popfl": /* no output */
25 :"g" (f)
26 :"memory", "cc");
27 }
28
l *0xc0104be5
0xc0104be5 is at include2/asm/bitops.h:246.
241 static int test_bit(int nr, const volatile void * addr);
242 #endif
243
244 static __always_inline int constant_test_bit(int nr, const volatile unsigned long *addr)
245 {
246 return ((1UL << (nr & 31)) & (addr[nr >> 5])) != 0;
247 }
248
249 static inline int variable_test_bit(int nr, const volatile unsigned long * addr)
250 {
l *0xc0123442
0xc0123442 is in copy_process (/mnt/md0/devel/linux-mm/kernel/fork.c:1084).
1079 p->hardirq_enable_ip = 0;
1080 p->hardirq_enable_event = 0;
1081 p->hardirq_disable_ip = _THIS_IP_;
1082 p->hardirq_disable_event = 0;
1083 p->softirqs_enabled = 1;
1084 p->softirq_enable_ip = _THIS_IP_;
1085 p->softirq_enable_event = 0;
1086 p->softirq_disable_ip = 0;
1087 p->softirq_disable_event = 0;
1088 p->hardirq_context = 0;
[<c01051a1>] dump_trace+0x63/0x1eb
[<c0105343>] show_trace_log_lvl+0x1a/0x30
[<c0105f8a>] show_trace+0x12/0x14
[<c0106027>] dump_stack+0x16/0x18
[<c011dd5b>] __might_sleep+0xc9/0xcf
[<c0269cb7>] do_unblank_screen+0x23/0x138
[<c0269dd9>] unblank_screen+0xd/0xf
[<c020d3df>] bust_spinlocks+0x1b/0x2c
[<c01060c5>] die_nmi+0x9c/0xd9
[<c0116ce1>] nmi_watchdog_tick+0x12e/0x20d
[<c010643a>] do_nmi+0x97/0x274
[<c034d23b>] nmi_stack_correct+0x26/0x2b
[<c014cd37>] cie_for_fde+0x45/0x65
[<c014dd93>] unwind+0x46d/0xfa2
[<c010510d>] dump_trace_unwind+0xb4/0xe5
[<c014ce4d>] unwind_init_running+0x25/0x2b
[<c01051a1>] dump_trace+0x63/0x1eb
[<c010ad39>] save_stack_trace+0x23/0x42
[<c01393c9>] update_cpu_base_expires_next+0x56/0x5a
[<c013a475>] hrtimer_interrupt+0x17c/0x1b8
[<c0115e8e>] smp_apic_timer_interrupt+0x72/0x85
[<c0104bef>] apic_timer_interrupt+0x33/0x38
[<c020c184>] __get_user_4+0x14/0x17
DWARF2 unwinder stuck at __get_user_4+0x14/0x17
Leftover inexact backtrace:
[<c018b42f>] do_execve+0xdd/0x210
[<c0102497>] sys_execve+0x3f/0x62
[<c01041c2>] sysenter_past_esp+0x5f/0x99
=======================
BUG: at /mnt/md0/devel/linux-mm/drivers/char/vt.c:3411 do_unblank_screen()
[<c01051a1>] dump_trace+0x63/0x1eb
[<c0105343>] show_trace_log_lvl+0x1a/0x30
[<c0105f8a>] show_trace+0x12/0x14
[<c0106027>] dump_stack+0x16/0x18
[<c0269d07>] do_unblank_screen+0x73/0x138
[<c0269dd9>] unblank_screen+0xd/0xf
[<c020d3df>] bust_spinlocks+0x1b/0x2c
[<c01060c5>] die_nmi+0x9c/0xd9
[<c0116ce1>] nmi_watchdog_tick+0x12e/0x20d
[<c010643a>] do_nmi+0x97/0x274
[<c034d23b>] nmi_stack_correct+0x26/0x2b
[<c014cd37>] cie_for_fde+0x45/0x65
[<c014dd93>] unwind+0x46d/0xfa2
[<c010510d>] dump_trace_unwind+0xb4/0xe5
[<c014ce4d>] unwind_init_running+0x25/0x2b
[<c01051a1>] dump_trace+0x63/0x1eb
[<c010ad39>] save_stack_trace+0x23/0x42
[<c01393c9>] update_cpu_base_expires_next+0x56/0x5a
[<c013a475>] hrtimer_interrupt+0x17c/0x1b8
[<c0115e8e>] smp_apic_timer_interrupt+0x72/0x85
[<c0104bef>] apic_timer_interrupt+0x33/0x38
[<c020c184>] __get_user_4+0x14/0x17
DWARF2 unwinder stuck at __get_user_4+0x14/0x17
Leftover inexact backtrace:
[<c018b42f>] do_execve+0xdd/0x210
[<c0102497>] sys_execve+0x3f/0x62
[<c01041c2>] sysenter_past_esp+0x5f/0x99
=======================
Kernel panic - not syncing: Aiee, killing interrupt handler!
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.21-rc5-mm3/mm-console2.log
Regards,
Michal
--
Michal K. K. Piotrowski
LTG - Linux Testers Group (PL)
(http://www.stardust.webpages.pl/ltg/)
LTG - Linux Testers Group (EN)
(http://www.stardust.webpages.pl/linux_testers_group_en/)
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3
2007-03-30 8:05 2.6.21-rc5-mm3 Andrew Morton
2007-03-30 11:00 ` 2.6.21-rc5-mm3 Rafael J. Wysocki
2007-03-30 16:31 ` 2.6.21-rc5-mm3 Michal Piotrowski
@ 2007-03-30 16:38 ` Dmitry Torokhov
2007-03-30 16:59 ` 2.6.21-rc5-mm3 Andrew Morton
2007-03-30 17:23 ` 2.6.21-rc5-mm3 Valdis.Kletnieks
` (8 subsequent siblings)
11 siblings, 1 reply; 60+ messages in thread
From: Dmitry Torokhov @ 2007-03-30 16:38 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On 3/30/07, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm3/
>
> - git-cryptodev has things in it again
>
> - Re-added git-e1000: a large amount of e1000 driver work
>
> - git-net has a huge amount of material in it, but I dropped it because it
> went oops.
>
> - git-block is back, minus the problematic unplugging rework.
>
> - Lots of x86 updates.
>
> - lguest is being redone and has been dropped
>
> - The IDE development tree has been restored
>
Andrew,
Did you drop git-input? I do not see it anywhere....
--
Dmitry
^ permalink raw reply [flat|nested] 60+ messages in thread* Re: 2.6.21-rc5-mm3
2007-03-30 16:38 ` 2.6.21-rc5-mm3 Dmitry Torokhov
@ 2007-03-30 16:59 ` Andrew Morton
0 siblings, 0 replies; 60+ messages in thread
From: Andrew Morton @ 2007-03-30 16:59 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: linux-kernel
On Fri, 30 Mar 2007 12:38:11 -0400 "Dmitry Torokhov" <dmitry.torokhov@gmail.com> wrote:
> On 3/30/07, Andrew Morton <akpm@linux-foundation.org> wrote:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm3/
> >
> > - git-cryptodev has things in it again
> >
> > - Re-added git-e1000: a large amount of e1000 driver work
> >
> > - git-net has a huge amount of material in it, but I dropped it because it
> > went oops.
> >
> > - git-block is back, minus the problematic unplugging rework.
> >
> > - Lots of x86 updates.
> >
> > - lguest is being redone and has been dropped
> >
> > - The IDE development tree has been restored
> >
>
> Andrew,
>
> Did you drop git-input? I do not see it anywhere....
>
hm, odd, my git-input pull came up with a short changelog and no diff, so
it was decided that the tree was empty. I don't know what could have
caused that. Seems OK now though.
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3
2007-03-30 8:05 2.6.21-rc5-mm3 Andrew Morton
` (2 preceding siblings ...)
2007-03-30 16:38 ` 2.6.21-rc5-mm3 Dmitry Torokhov
@ 2007-03-30 17:23 ` Valdis.Kletnieks
2007-03-30 18:58 ` 2.6.21-rc5-mm3 Johannes Berg
2007-03-31 7:12 ` 2.6.21-rc5-mm3 - no boot, "address not 2M aligned" Helge Hafting
` (7 subsequent siblings)
11 siblings, 1 reply; 60+ messages in thread
From: Valdis.Kletnieks @ 2007-03-30 17:23 UTC (permalink / raw)
To: Andrew Morton, johannes; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 681 bytes --]
On Fri, 30 Mar 2007 01:05:59 PDT, Andrew Morton said:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm3/
Building with CONFIG_MAC80211_DEBUGFS=y but CONFIG_MAC80211_DEBUG_COUNTERS=n
blows chunks on my box:
CC [M] net/mac80211/debugfs.o
net/mac80211/debugfs.c: In function ‘stats_wme_rx_queue_read’:
net/mac80211/debugfs.c:266: error: ‘struct ieee80211_local’ has no member named ‘wme_rx_queue’
net/mac80211/debugfs.c: In function ‘stats_wme_tx_queue_read’:
net/mac80211/debugfs.c:286: error: ‘struct ieee80211_local’ has no member named ‘wme_tx_queue’
make[2]: *** [net/mac80211/debugfs.o] Error 1
[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]
^ permalink raw reply [flat|nested] 60+ messages in thread* Re: 2.6.21-rc5-mm3
2007-03-30 17:23 ` 2.6.21-rc5-mm3 Valdis.Kletnieks
@ 2007-03-30 18:58 ` Johannes Berg
0 siblings, 0 replies; 60+ messages in thread
From: Johannes Berg @ 2007-03-30 18:58 UTC (permalink / raw)
To: Valdis.Kletnieks; +Cc: Andrew Morton, linux-kernel
On Fri, 2007-03-30 at 13:23 -0400, Valdis.Kletnieks@vt.edu wrote:
> On Fri, 30 Mar 2007 01:05:59 PDT, Andrew Morton said:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm3/
>
> Building with CONFIG_MAC80211_DEBUGFS=y but CONFIG_MAC80211_DEBUG_COUNTERS=n
> blows chunks on my box:
>
> CC [M] net/mac80211/debugfs.o
> net/mac80211/debugfs.c: In function ‘stats_wme_rx_queue_read’:
> net/mac80211/debugfs.c:266: error: ‘struct ieee80211_local’ has no member named ‘wme_rx_queue’
> net/mac80211/debugfs.c: In function ‘stats_wme_tx_queue_read’:
> net/mac80211/debugfs.c:286: error: ‘struct ieee80211_local’ has no member named ‘wme_tx_queue’
> make[2]: *** [net/mac80211/debugfs.o] Error 1
Yeah, my mistake. I posted a patch to fix it to wireless-dev but John is
on vacation, below is a copy.
If you want to put it anywhere here's my
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
---
net/mac80211/debugfs.c | 20 ++++++++++----------
net/mac80211/debugfs_sta.c | 4 ++++
net/mac80211/ieee80211_i.h | 4 ++--
net/mac80211/sta_info.h | 2 ++
4 files changed, 18 insertions(+), 12 deletions(-)
--- wireless-dev.orig/net/mac80211/debugfs.c 2007-03-28 22:57:03.937731699 +0200
+++ wireless-dev/net/mac80211/debugfs.c 2007-03-28 22:59:12.287731699 +0200
@@ -246,12 +246,6 @@ DEBUGFS_STATS_FILE(rx_handlers_fragments
local->rx_handlers_fragments);
DEBUGFS_STATS_FILE(tx_status_drop, 20, "%u",
local->tx_status_drop);
-#endif
-
-DEBUGFS_DEVSTATS_FILE(dot11ACKFailureCount);
-DEBUGFS_DEVSTATS_FILE(dot11RTSFailureCount);
-DEBUGFS_DEVSTATS_FILE(dot11FCSErrorCount);
-DEBUGFS_DEVSTATS_FILE(dot11RTSSuccessCount);
static ssize_t stats_wme_rx_queue_read(struct file *file,
char __user *userbuf,
@@ -292,6 +286,12 @@ static const struct file_operations stat
.read = stats_wme_tx_queue_read,
.open = mac80211_open_file_generic,
};
+#endif
+
+DEBUGFS_DEVSTATS_FILE(dot11ACKFailureCount);
+DEBUGFS_DEVSTATS_FILE(dot11RTSFailureCount);
+DEBUGFS_DEVSTATS_FILE(dot11FCSErrorCount);
+DEBUGFS_DEVSTATS_FILE(dot11RTSSuccessCount);
void debugfs_hw_add(struct ieee80211_local *local)
@@ -360,13 +360,13 @@ void debugfs_hw_add(struct ieee80211_loc
DEBUGFS_STATS_ADD(rx_expand_skb_head2);
DEBUGFS_STATS_ADD(rx_handlers_fragments);
DEBUGFS_STATS_ADD(tx_status_drop);
+ DEBUGFS_STATS_ADD(wme_tx_queue);
+ DEBUGFS_STATS_ADD(wme_rx_queue);
#endif
DEBUGFS_STATS_ADD(dot11ACKFailureCount);
DEBUGFS_STATS_ADD(dot11RTSFailureCount);
DEBUGFS_STATS_ADD(dot11FCSErrorCount);
DEBUGFS_STATS_ADD(dot11RTSSuccessCount);
- DEBUGFS_STATS_ADD(wme_tx_queue);
- DEBUGFS_STATS_ADD(wme_rx_queue);
}
void debugfs_hw_del(struct ieee80211_local *local)
@@ -419,13 +419,13 @@ void debugfs_hw_del(struct ieee80211_loc
DEBUGFS_STATS_DEL(rx_expand_skb_head2);
DEBUGFS_STATS_DEL(rx_handlers_fragments);
DEBUGFS_STATS_DEL(tx_status_drop);
+ DEBUGFS_STATS_DEL(wme_tx_queue);
+ DEBUGFS_STATS_DEL(wme_rx_queue);
#endif
DEBUGFS_STATS_DEL(dot11ACKFailureCount);
DEBUGFS_STATS_DEL(dot11RTSFailureCount);
DEBUGFS_STATS_DEL(dot11FCSErrorCount);
DEBUGFS_STATS_DEL(dot11RTSSuccessCount);
- DEBUGFS_STATS_DEL(wme_tx_queue);
- DEBUGFS_STATS_DEL(wme_rx_queue);
debugfs_remove(local->debugfs.statistics);
local->debugfs.statistics = NULL;
--- wireless-dev.orig/net/mac80211/ieee80211_i.h 2007-03-28 22:58:07.635731699 +0200
+++ wireless-dev/net/mac80211/ieee80211_i.h 2007-03-28 22:58:20.591731699 +0200
@@ -647,13 +647,13 @@ struct ieee80211_local {
struct dentry *rx_expand_skb_head2;
struct dentry *rx_handlers_fragments;
struct dentry *tx_status_drop;
+ struct dentry *wme_tx_queue;
+ struct dentry *wme_rx_queue;
#endif
struct dentry *dot11ACKFailureCount;
struct dentry *dot11RTSFailureCount;
struct dentry *dot11FCSErrorCount;
struct dentry *dot11RTSSuccessCount;
- struct dentry *wme_tx_queue;
- struct dentry *wme_rx_queue;
} stats;
struct dentry *stations;
struct dentry *keys;
--- wireless-dev.orig/net/mac80211/debugfs_sta.c 2007-03-28 22:59:49.973731699 +0200
+++ wireless-dev/net/mac80211/debugfs_sta.c 2007-03-28 23:00:22.353731699 +0200
@@ -222,8 +222,10 @@ void ieee80211_sta_debugfs_add(struct st
DEBUGFS_ADD(last_ack_ms);
DEBUGFS_ADD(inactive_ms);
DEBUGFS_ADD(last_seq_ctrl);
+#ifdef CONFIG_MAC80211_DEBUG_COUNTERS
DEBUGFS_ADD(wme_rx_queue);
DEBUGFS_ADD(wme_tx_queue);
+#endif
}
void ieee80211_sta_debugfs_remove(struct sta_info *sta)
@@ -234,8 +236,10 @@ void ieee80211_sta_debugfs_remove(struct
DEBUGFS_DEL(last_ack_ms);
DEBUGFS_DEL(inactive_ms);
DEBUGFS_DEL(last_seq_ctrl);
+#ifdef CONFIG_MAC80211_DEBUG_COUNTERS
DEBUGFS_DEL(wme_rx_queue);
DEBUGFS_DEL(wme_tx_queue);
+#endif
debugfs_remove(sta->debugfs.dir);
sta->debugfs.dir = NULL;
--- wireless-dev.orig/net/mac80211/sta_info.h 2007-03-28 23:01:03.437731699 +0200
+++ wireless-dev/net/mac80211/sta_info.h 2007-03-28 23:01:15.009731699 +0200
@@ -124,8 +124,10 @@ struct sta_info {
struct dentry *last_ack_ms;
struct dentry *inactive_ms;
struct dentry *last_seq_ctrl;
+#ifdef CONFIG_MAC80211_DEBUG_COUNTERS
struct dentry *wme_rx_queue;
struct dentry *wme_tx_queue;
+#endif
} debugfs;
#endif
};
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-03-30 8:05 2.6.21-rc5-mm3 Andrew Morton
` (3 preceding siblings ...)
2007-03-30 17:23 ` 2.6.21-rc5-mm3 Valdis.Kletnieks
@ 2007-03-31 7:12 ` Helge Hafting
2007-03-31 7:53 ` Andrew Morton
2007-03-31 8:05 ` 2.6.21-rc5-mm3 - cpuidle, acpi, and C-states Valdis.Kletnieks
` (6 subsequent siblings)
11 siblings, 1 reply; 60+ messages in thread
From: Helge Hafting @ 2007-03-31 7:12 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
A new error for me:
loading 2.6.21rc5mm3
Bios data check successful
Destination address not 2M aligned
-- System halted
This is using the same lilo that loads 2.6.18rc5mm1 fine.
x86-64
Helge Hafting
^ permalink raw reply [flat|nested] 60+ messages in thread* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-03-31 7:12 ` 2.6.21-rc5-mm3 - no boot, "address not 2M aligned" Helge Hafting
@ 2007-03-31 7:53 ` Andrew Morton
2007-03-31 8:14 ` Eric W. Biederman
2007-04-01 5:29 ` thunder7
0 siblings, 2 replies; 60+ messages in thread
From: Andrew Morton @ 2007-03-31 7:53 UTC (permalink / raw)
To: Helge Hafting; +Cc: linux-kernel, Vivek Goyal, Eric W. Biederman
On Sat, 31 Mar 2007 09:12:20 +0200 Helge Hafting <helgehaf@aitel.hist.no> wrote:
> A new error for me:
>
> loading 2.6.21rc5mm3
> Bios data check successful
> Destination address not 2M aligned
> -- System halted
>
>
> This is using the same lilo that loads 2.6.18rc5mm1 fine.
> x86-64
>
That's new. Does changing the value of CONFIG_RELOCATABLE change anything?
Please send the .config.
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-03-31 7:53 ` Andrew Morton
@ 2007-03-31 8:14 ` Eric W. Biederman
2007-04-09 22:09 ` Helge Hafting
2007-04-01 5:29 ` thunder7
1 sibling, 1 reply; 60+ messages in thread
From: Eric W. Biederman @ 2007-03-31 8:14 UTC (permalink / raw)
To: Andrew Morton; +Cc: Helge Hafting, linux-kernel, Vivek Goyal
Andrew Morton <akpm@linux-foundation.org> writes:
> On Sat, 31 Mar 2007 09:12:20 +0200 Helge Hafting <helgehaf@aitel.hist.no> wrote:
>
>> A new error for me:
>>
>> loading 2.6.21rc5mm3
>> Bios data check successful
>> Destination address not 2M aligned
>> -- System halted
>>
>>
>> This is using the same lilo that loads 2.6.18rc5mm1 fine.
>> x86-64
>>
>
> That's new. Does changing the value of CONFIG_RELOCATABLE change anything?
I will have to dig a little deeper but this certainly sounds like the
x86_64 relocatable kernel patches. I believe the check is in
arch/x86_64/boot/compressed/misc.c
I think the interesting .config variable is going to be
CONFIG_PHYSICAL_START.
I suspect that isn't going to be 2M aligned, like the kernel requires
for best performance.
> Please send the .config.
Please.
Eric
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-03-31 8:14 ` Eric W. Biederman
@ 2007-04-09 22:09 ` Helge Hafting
2007-04-10 4:48 ` Helge Hafting
0 siblings, 1 reply; 60+ messages in thread
From: Helge Hafting @ 2007-04-09 22:09 UTC (permalink / raw)
To: Eric W. Biederman; +Cc: Andrew Morton, linux-kernel, Vivek Goyal
[-- Attachment #1: Type: text/plain, Size: 71 bytes --]
Here is my .config
Sorry for the late reply, I have been on a holiday.
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 47658 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.21-rc5-mm2
# Wed Mar 28 12:18:09 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_PAGE_GROUP_BY_MOBILITY=y
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Process debugging support
#
CONFIG_UTRACE=y
CONFIG_PTRACE=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_PARAVIRT is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MCORE2 is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_ADAPTIVE_READAHEAD=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_KEXEC is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_COMPAT_VDSO is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_SLEEP is not set
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=y
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=y
#
# CPU idle PM support
#
CONFIG_CPU_IDLE=y
#
# Governors
#
CONFIG_CPU_IDLE_GOV_LADDER=y
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_DEBUG=y
# CONFIG_HT_IRQ is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
# CONFIG_IP_PIMSM_V2 is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
# CONFIG_NF_CONNTRACK_ENABLED is not set
CONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_IPRANGE is not set
CONFIG_IP_NF_MATCH_TOS=y
# CONFIG_IP_NF_MATCH_RECENT is not set
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_OWNER=y
CONFIG_IP_NF_MATCH_ADDRTYPE=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_NF_TARGET_TOS is not set
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_OWNER=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_AH=y
CONFIG_IP6_NF_MATCH_MH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_TARGET_HL=y
# CONFIG_IP6_NF_RAW is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=y
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_TFRC_LIB=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_FIB_RULES=y
#
# Wireless
#
CONFIG_CFG80211=y
CONFIG_CFG80211_WEXT_COMPAT=y
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=y
# CONFIG_MAC80211_DEBUG is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_ACPI_IBM is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_BLK_DEV_IDEACPI=y
CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACPI=y
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
# CONFIG_MAC_EMUMOUSEBTN is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_VIOC is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX_MAC80211 is not set
CONFIG_RT2X00=y
CONFIG_RT2X00_LIB=y
CONFIG_RT2400PCI=y
CONFIG_RT2500PCI=y
# CONFIG_RT61PCI is not set
# CONFIG_RT2500USB is not set
# CONFIG_RT73USB is not set
# CONFIG_RT2X00_DEBUG is not set
# CONFIG_ADM8211 is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ZD1211RW_MAC80211 is not set
# CONFIG_RTL818X is not set
# CONFIG_RTL8187 is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_ALPS is not set
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
# CONFIG_MOUSE_PS2_LIFEBOOK is not set
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_DONT_TEST_BUG_TXEN is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=y
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PASEMI is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_PROGEAR is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frambuffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
CONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# SoC audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
# CONFIG_USB_STORAGE_FREECOM is not set
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Input Devices
#
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_GTCO is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=y
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=y
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_WBSD=y
CONFIG_MMC_TIFM_SD=y
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
#
# DMA Devices
#
#
# Auxiliary Display support
#
#
# Virtualization
#
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
# CONFIG_KVM_AMD is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4DEV_FS=y
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
# CONFIG_EXT4DEV_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Layered filesystems
#
# CONFIG_UNION_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=y
CONFIG_SMB_FS=y
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_UPCALL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_RODATA is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_INTEGRITY is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CAMELLIA=y
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_CRC_ITU_T is not set
CONFIG_LIBCRC32C=y
CONFIG_EEPROM_93CX6=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-04-09 22:09 ` Helge Hafting
@ 2007-04-10 4:48 ` Helge Hafting
0 siblings, 0 replies; 60+ messages in thread
From: Helge Hafting @ 2007-04-10 4:48 UTC (permalink / raw)
To: Eric W. Biederman; +Cc: Andrew Morton, linux-kernel, Vivek Goyal
[-- Attachment #1: Type: text/plain, Size: 82 bytes --]
Sorry, that was a wrong .config file. Here is the right one, form
the amd64 box:
[-- Attachment #2: .config64 --]
[-- Type: text/plain, Size: 48028 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.21-rc5-mm3
# Sat Mar 31 09:01:57 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_PAGE_GROUP_BY_MOBILITY=y
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Process debugging support
#
CONFIG_UTRACE=y
CONFIG_PTRACE=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not set
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
# CONFIG_SMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_ADAPTIVE_READAHEAD=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_REORDER=y
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_SLEEP is not set
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_ACPI_CPUFREQ=y
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# CPU idle PM support
#
CONFIG_CPU_IDLE=y
#
# Governors
#
CONFIG_CPU_IDLE_GOV_LADDER=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
# CONFIG_NF_CONNTRACK_ENABLED is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=y
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_IPRANGE is not set
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_OWNER=y
CONFIG_IP_NF_MATCH_ADDRTYPE=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_OWNER=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_AH=y
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_TARGET_HL=y
# CONFIG_IP6_NF_RAW is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=y
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_TFRC_LIB=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Wireless
#
CONFIG_CFG80211=y
CONFIG_CFG80211_WEXT_COMPAT=y
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=y
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=y
CONFIG_IEEE80211_CRYPT_TKIP=y
CONFIG_IEEE80211_SOFTMAC=y
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_ACPI_IBM is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_BLK_DEV_IDEACPI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACPI=y
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
# CONFIG_MAC_EMUMOUSEBTN is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_VIOC is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
# CONFIG_ZD1211RW is not set
# CONFIG_BCM43XX_MAC80211 is not set
# CONFIG_RT2X00 is not set
# CONFIG_ADM8211 is not set
# CONFIG_ZD1211RW_MAC80211 is not set
# CONFIG_RTL818X is not set
# CONFIG_RTL8187 is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=y
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_JOYDUMP=y
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_GEODE is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
CONFIG_AGP_VIA=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
CONFIG_DRM_MGA=y
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PASEMI is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_K8TEMP=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_VIA686A=y
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_HWMON_DEBUG_CHIP=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_PROGEAR is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frambuffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_INTEL is not set
CONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not set
# CONFIG_FB_MATROX_MYSTIQUE is not set
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
# CONFIG_FB_MATROX_MAVEN is not set
# CONFIG_FB_MATROX_MULTIHEAD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
# CONFIG_FONT_8x16 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
CONFIG_FONT_ACORN_8x8=y
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=y
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# SoC audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Input Devices
#
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_GTCO is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
CONFIG_USB_SERIAL_IPAQ=y
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=y
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc"
CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
#
# Auxiliary Display support
#
# CONFIG_KS0108 is not set
#
# Virtualization
#
CONFIG_KVM=y
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=y
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_PROC_SYSCTL is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Layered filesystems
#
# CONFIG_UNION_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_UNWIND_INFO is not set
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_INTEGRITY is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CAMELLIA=y
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_CRC_ITU_T is not set
CONFIG_LIBCRC32C=y
# CONFIG_EEPROM_93CX6 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-03-31 7:53 ` Andrew Morton
2007-03-31 8:14 ` Eric W. Biederman
@ 2007-04-01 5:29 ` thunder7
2007-04-01 6:15 ` Eric W. Biederman
1 sibling, 1 reply; 60+ messages in thread
From: thunder7 @ 2007-04-01 5:29 UTC (permalink / raw)
To: Andrew Morton; +Cc: Helge Hafting, linux-kernel, Vivek Goyal, Eric W. Biederman
From: Andrew Morton <akpm@linux-foundation.org>
Date: Sat, Mar 31, 2007 at 12:53:03AM -0700
> On Sat, 31 Mar 2007 09:12:20 +0200 Helge Hafting <helgehaf@aitel.hist.no> wrote:
>
> > A new error for me:
> >
> > loading 2.6.21rc5mm3
> > Bios data check successful
> > Destination address not 2M aligned
> > -- System halted
> >
> >
> > This is using the same lilo that loads 2.6.18rc5mm1 fine.
> > x86-64
> >
>
> That's new. Does changing the value of CONFIG_RELOCATABLE change anything?
>
> Please send the .config.
>
I had the same with this .config from 2.6.21-rc3-mm2 after running 'make
oldconfig' and answering N to all new questions. Then, I tweaked some
items, mostly to see if there was an 'align kernel' item in there
somewhere. Diff between _working_ 2.6.21-rc5-mm3 .config and this
2.6.21-rc3-mm2 .config at the end. Somehow that seems to have adapted
'CONFIG_PHYSICAL_START', maybe that's it?
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.21-rc3-mm2
# Tue Mar 13 18:35:46 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_PAGE_GROUP_BY_MOBILITY=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Process debugging support
#
CONFIG_UTRACE=y
CONFIG_PTRACE=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_ADAPTIVE_READAHEAD=y
CONFIG_NR_CPUS=2
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_REORDER=y
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_ACPI_CPUFREQ=m
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# CPU idle PM support
#
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_DOMAINS is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_IA32_EMULATION is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
CONFIG_NF_CONNTRACK_ENABLED=y
CONFIG_NF_CONNTRACK_SUPPORT=y
# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_FIFO=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=32
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=12
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_HPTIOP=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
CONFIG_SATA_SIL24=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_INTEL_COMBINED=y
CONFIG_SATA_ACPI=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_RAID5_RESHAPE=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FW is not set
CONFIG_IEEE1394=y
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=y
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=y
CONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=y
CONFIG_IEEE1394_RAWIO=y
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
# CONFIG_MAC_EMUMOUSEBTN is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
# CONFIG_ARCNET_CAP is not set
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
#
# PHY device support
#
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
CONFIG_FORCEDETH_NAPI=y
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_VIOC is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_RTL818X is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_DONT_TEST_BUG_TXEN is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=m
# CONFIG_I6300ESB_WDT is not set
CONFIG_I8XX_TCO=m
# CONFIG_ITCO_WDT is not set
CONFIG_SC1200_WDT=m
# CONFIG_PC87413_WDT is not set
CONFIG_60XX_WDT=m
# CONFIG_SBC8360_WDT is not set
CONFIG_CPU5_WDT=m
# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
# CONFIG_W83697HF_WDT is not set
CONFIG_W83877F_WDT=m
# CONFIG_W83977F_WDT is not set
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_GEODE is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PASEMI is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=m
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_PROGEAR is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frambuffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
# CONFIG_FONT_8x16 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
CONFIG_FONT_10x18=y
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# SoC audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_GTCO is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_E752X is not set
CONFIG_EDAC_K8=y
CONFIG_EDAC_POLL=y
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_M48T86=m
# CONFIG_RTC_DRV_TEST is not set
CONFIG_RTC_DRV_V3020=m
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
#
# DMA Devices
#
#
# Auxiliary Display support
#
#
# Virtualization
#
# CONFIG_KVM is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Layered filesystems
#
# CONFIG_UNION_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
# CONFIG_MARKERS is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_INTEGRITY is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_CRC_ITU_T is not set
CONFIG_LIBCRC32C=y
# CONFIG_EEPROM_93CX6 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
The diff between this .config and a working 2.6.21-rc5-mm3 .config:
--- /usr/src/linux-2.6.21-rc3-mm2/.config 2007-03-13 18:35:46.000000000 +0100
+++ /usr/src/linux-2.6.21-rc5-mm3/.config 2007-03-31 19:50:11.000000000 +0200
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc3-mm2
-# Tue Mar 13 18:35:46 2007
+# Linux kernel version: 2.6.21-rc5-mm3
+# Sat Mar 31 19:50:11 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
@@ -61,8 +61,8 @@
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -75,15 +75,12 @@
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_PAGE_GROUP_BY_MOBILITY=y
+# CONFIG_PAGE_GROUP_BY_MOBILITY is not set
#
# Loadable module support
@@ -175,7 +172,8 @@
CONFIG_X86_MCE_AMD=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x100000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
@@ -212,7 +210,6 @@
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
-# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
@@ -251,7 +248,6 @@
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
-# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
@@ -637,12 +633,12 @@
# CONFIG_TIFM_CORE is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
+# CONFIG_ACPI_IBM is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=12
CONFIG_BLK_DEV_IDE=y
#
@@ -675,7 +671,6 @@
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
@@ -706,7 +701,6 @@
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
@@ -736,6 +730,7 @@
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
@@ -804,8 +799,8 @@
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-CONFIG_SATA_INTEL_COMBINED=y
CONFIG_SATA_ACPI=y
+# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -842,7 +837,6 @@
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
#
# Multi-device support (RAID and LVM)
@@ -870,15 +864,13 @@
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_FW is not set
+# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
-CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
#
# Device Drivers
@@ -891,6 +883,7 @@
#
CONFIG_IEEE1394_VIDEO1394=y
CONFIG_IEEE1394_SBP2=y
+# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=y
CONFIG_IEEE1394_RAWIO=y
@@ -1133,7 +1126,6 @@
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_DONT_TEST_BUG_TXEN is not set
CONFIG_SERIAL_8250_RSA=y
#
@@ -1230,6 +1222,7 @@
# I2C support
#
CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
@@ -1264,7 +1257,6 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
@@ -1299,6 +1291,7 @@
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@@ -1314,6 +1307,7 @@
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
@@ -1326,6 +1320,7 @@
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
@@ -1343,6 +1338,7 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -1558,6 +1554,7 @@
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_CAIAQ is not set
#
# SoC audio support
@@ -1578,6 +1575,17 @@
# CONFIG_HIDRAW is not set
#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
@@ -1590,6 +1598,7 @@
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
@@ -1629,13 +1638,6 @@
#
# USB Input Devices
#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
@@ -1763,24 +1765,38 @@
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# RTC drivers
+# I2C RTC drivers
#
-CONFIG_RTC_DRV_CMOS=m
-CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_DS1553=m
-CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_DS1672=m
-CONFIG_RTC_DRV_DS1742=m
-CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_M48T86=m
-# CONFIG_RTC_DRV_TEST is not set
CONFIG_RTC_DRV_V3020=m
#
+# on-CPU RTC drivers
+#
+
+#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
@@ -1846,7 +1862,7 @@
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
+CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -2014,6 +2030,8 @@
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
+CONFIG_UNWIND_INFO=y
+CONFIG_STACK_UNWIND=y
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
Kind regards,
Jurriaan
--
I am the widget missing from the easy to assemble swingset
Darkwing Duck
Debian (Unstable) GNU/Linux 2.6.21-rc5-mm3 2x2010 bogomips load 0.39
the Jack Vance Integral Edition: http://www.integralarchive.org
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-04-01 5:29 ` thunder7
@ 2007-04-01 6:15 ` Eric W. Biederman
2007-04-01 6:29 ` Andrew Morton
0 siblings, 1 reply; 60+ messages in thread
From: Eric W. Biederman @ 2007-04-01 6:15 UTC (permalink / raw)
To: Jurriaan; +Cc: Andrew Morton, Helge Hafting, linux-kernel, Vivek Goyal
thunder7@xs4all.nl writes:
> I had the same with this .config from 2.6.21-rc3-mm2 after running 'make
> oldconfig' and answering N to all new questions. Then, I tweaked some
> items, mostly to see if there was an 'align kernel' item in there
> somewhere. Diff between _working_ 2.6.21-rc5-mm3 .config and this
> 2.6.21-rc3-mm2 .config at the end. Somehow that seems to have adapted
> 'CONFIG_PHYSICAL_START', maybe that's it?
That looks like it.
Does anyone know how to express the constraint of a 2M aligned number in Kconfig?
The original plan was to remove CONFIG_PHYSICAL_START and CONFIG_RELOCATABLE on
x86_64 because after this series they have no cost and thus just lead to a little
more confusion.
However because we don't tag vmlinux as ET_DYN and Xen has some use for kernel
built at different physical addresses (or at least loaded at them), and because
Xen directly loads vmlinux he kept those options.
If we can find a place to stick it into the build doing a little post processing
of vmlinux so that it has the proper ELF header type (ET_DYN not ET_EXEC) would
be useful and allow us to remove those extra confusing options.
If I have a spare moment I will take a look. Since there is confusion it is
probably worth removing the unnecessary confusing options if we can instead
of supporting the full confusion.
Doing the same for i386 would be a little harder but with Dave
Miller's suggestions for Xen and leaving the functions to be replaced
unlinked so the compiler generates efficient calls and then doing
linking magic to fill in the pieces at boot looks about as tricky as
moving the relocation logic for i386 into vmlinux as well. So it
seems feasible and possibly worth doing.
Eric
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-04-01 6:15 ` Eric W. Biederman
@ 2007-04-01 6:29 ` Andrew Morton
2007-04-02 7:41 ` Vivek Goyal
0 siblings, 1 reply; 60+ messages in thread
From: Andrew Morton @ 2007-04-01 6:29 UTC (permalink / raw)
To: Eric W. Biederman; +Cc: Jurriaan, Helge Hafting, linux-kernel, Vivek Goyal
On Sun, 01 Apr 2007 00:15:51 -0600 ebiederm@xmission.com (Eric W. Biederman) wrote:
> Does anyone know how to express the constraint of a 2M aligned number in Kconfig?
Nope, but we could make CONFIG_PHYSICAL_START be in units of 2MB, which
would be a bit hard to use.
Adding a BUILD_BUG_ON which checks this constraint might help. Plus a
useful comment right at the BUILD_BUG_ON site explaining what to do about
it.
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-04-01 6:29 ` Andrew Morton
@ 2007-04-02 7:41 ` Vivek Goyal
2007-04-02 8:43 ` Eric W. Biederman
2007-04-02 11:17 ` 2.6.21-rc5-mm3 - no boot, "address not 2M aligned" thunder7
0 siblings, 2 replies; 60+ messages in thread
From: Vivek Goyal @ 2007-04-02 7:41 UTC (permalink / raw)
To: Andrew Morton; +Cc: Eric W. Biederman, Jurriaan, Helge Hafting, linux-kernel
On Sat, Mar 31, 2007 at 11:29:57PM -0700, Andrew Morton wrote:
> On Sun, 01 Apr 2007 00:15:51 -0600 ebiederm@xmission.com (Eric W. Biederman) wrote:
>
> > Does anyone know how to express the constraint of a 2M aligned number in Kconfig?
>
> Nope, but we could make CONFIG_PHYSICAL_START be in units of 2MB, which
> would be a bit hard to use.
>
> Adding a BUILD_BUG_ON which checks this constraint might help. Plus a
> useful comment right at the BUILD_BUG_ON site explaining what to do about
> it.
How about attached patch?
Thanks
Vivek
o X86_64 kernel should run from 2MB aligned address for two reasons.
- Performance.
- For relocatable kernels, page tables are updated based on difference
between compile time address and load time physical address.
This difference should be multiple of 2MB as kernel text and data
is mapped using 2MB pages and PMD should be pointing to a 2MB
aligned address. Life is simpler if both compile time and load time
kernel addresses are 2MB aligned.
o Flag the error at compile time if one is trying to build a kernel which
does not meet alignment restrictions.
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
---
arch/x86_64/kernel/head64.c | 8 ++++++++
include/asm-x86_64/page.h | 1 +
2 files changed, 9 insertions(+)
diff -puN arch/x86_64/kernel/head64.c~x86_64-check-for-config-physical-start-aligned-2M arch/x86_64/kernel/head64.c
--- linux-2.6.21-rc5-mm3-vanilla/arch/x86_64/kernel/head64.c~x86_64-check-for-config-physical-start-aligned-2M 2007-04-02 20:46:43.000000000 +0530
+++ linux-2.6.21-rc5-mm3-vanilla-root/arch/x86_64/kernel/head64.c 2007-04-02 21:20:45.000000000 +0530
@@ -62,6 +62,14 @@ void __init x86_64_start_kernel(char * r
{
int i;
+ /*
+ * Make sure kernel is aligned to 2MB address. Catching it at compile
+ * time is better. Change your config file and compile the kernel
+ * for a 2MB aligned address (CONFIG_PHYSICAL_START)
+ */
+ BUILD_BUG_ON(ALIGN(CONFIG_PHYSICAL_START, __KERNEL_ALIGN)
+ != CONFIG_PHYSICAL_START);
+
/* clear bss before set_intr_gate with early_idt_handler */
clear_bss();
diff -puN include/asm-x86_64/page.h~x86_64-check-for-config-physical-start-aligned-2M include/asm-x86_64/page.h
--- linux-2.6.21-rc5-mm3-vanilla/include/asm-x86_64/page.h~x86_64-check-for-config-physical-start-aligned-2M 2007-04-02 20:50:55.000000000 +0530
+++ linux-2.6.21-rc5-mm3-vanilla-root/include/asm-x86_64/page.h 2007-04-02 20:51:34.000000000 +0530
@@ -79,6 +79,7 @@ extern unsigned long phys_base;
#endif /* !__ASSEMBLY__ */
#define __PHYSICAL_START CONFIG_PHYSICAL_START
+#define __KERNEL_ALIGN 0x200000
#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
#define __START_KERNEL_map 0xffffffff80000000
#define __PAGE_OFFSET 0xffff810000000000
_
^ permalink raw reply [flat|nested] 60+ messages in thread* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-04-02 7:41 ` Vivek Goyal
@ 2007-04-02 8:43 ` Eric W. Biederman
2007-04-02 9:45 ` Vivek Goyal
2007-04-02 11:17 ` 2.6.21-rc5-mm3 - no boot, "address not 2M aligned" thunder7
1 sibling, 1 reply; 60+ messages in thread
From: Eric W. Biederman @ 2007-04-02 8:43 UTC (permalink / raw)
To: vgoyal; +Cc: Andrew Morton, Jurriaan, Helge Hafting, linux-kernel
Vivek Goyal <vgoyal@in.ibm.com> writes:
> On Sat, Mar 31, 2007 at 11:29:57PM -0700, Andrew Morton wrote:
>> On Sun, 01 Apr 2007 00:15:51 -0600 ebiederm@xmission.com (Eric W. Biederman)
> wrote:
>>
>> > Does anyone know how to express the constraint of a 2M aligned number in
> Kconfig?
>>
>> Nope, but we could make CONFIG_PHYSICAL_START be in units of 2MB, which
>> would be a bit hard to use.
>>
>> Adding a BUILD_BUG_ON which checks this constraint might help. Plus a
>> useful comment right at the BUILD_BUG_ON site explaining what to do about
>> it.
>
> How about attached patch?
Looks like that will work.
Vivek. If I can get the x86_64 vmlinux to have type ET_DYN (to mark
it as relocatable) is there any reason to keep CONFIG_PHYSICAL_START?
I think I can switch the vmlinux header type in about 100 lines or so
of code. Assuming I can ever get 30 minutes with the appropriate
kernel.
> Thanks
> Vivek
>
>
>
> o X86_64 kernel should run from 2MB aligned address for two reasons.
> - Performance.
> - For relocatable kernels, page tables are updated based on difference
> between compile time address and load time physical address.
> This difference should be multiple of 2MB as kernel text and data
> is mapped using 2MB pages and PMD should be pointing to a 2MB
> aligned address. Life is simpler if both compile time and load time
> kernel addresses are 2MB aligned.
>
> o Flag the error at compile time if one is trying to build a kernel which
> does not meet alignment restrictions.
>
> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
> ---
>
> arch/x86_64/kernel/head64.c | 8 ++++++++
> include/asm-x86_64/page.h | 1 +
> 2 files changed, 9 insertions(+)
>
> diff -puN
> arch/x86_64/kernel/head64.c~x86_64-check-for-config-physical-start-aligned-2M
> arch/x86_64/kernel/head64.c
> ---
> linux-2.6.21-rc5-mm3-vanilla/arch/x86_64/kernel/head64.c~x86_64-check-for-config-physical-start-aligned-2M
> 2007-04-02 20:46:43.000000000 +0530
> +++ linux-2.6.21-rc5-mm3-vanilla-root/arch/x86_64/kernel/head64.c 2007-04-02
> 21:20:45.000000000 +0530
> @@ -62,6 +62,14 @@ void __init x86_64_start_kernel(char * r
> {
> int i;
>
> + /*
> + * Make sure kernel is aligned to 2MB address. Catching it at compile
> + * time is better. Change your config file and compile the kernel
> + * for a 2MB aligned address (CONFIG_PHYSICAL_START)
> + */
> + BUILD_BUG_ON(ALIGN(CONFIG_PHYSICAL_START, __KERNEL_ALIGN)
> + != CONFIG_PHYSICAL_START);
Just as a nit.
BUILD_BUG_ON(CONFIG_PHYSICAL_START & (__KERNEL_ALIGN - 1))
is a little shorter... Although maybe not quite as readable.
> +
> /* clear bss before set_intr_gate with early_idt_handler */
> clear_bss();
>
> diff -puN
> include/asm-x86_64/page.h~x86_64-check-for-config-physical-start-aligned-2M
> include/asm-x86_64/page.h
> ---
> linux-2.6.21-rc5-mm3-vanilla/include/asm-x86_64/page.h~x86_64-check-for-config-physical-start-aligned-2M
> 2007-04-02 20:50:55.000000000 +0530
> +++ linux-2.6.21-rc5-mm3-vanilla-root/include/asm-x86_64/page.h 2007-04-02
> 20:51:34.000000000 +0530
> @@ -79,6 +79,7 @@ extern unsigned long phys_base;
> #endif /* !__ASSEMBLY__ */
>
> #define __PHYSICAL_START CONFIG_PHYSICAL_START
> +#define __KERNEL_ALIGN 0x200000
> #define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
> #define __START_KERNEL_map 0xffffffff80000000
> #define __PAGE_OFFSET 0xffff810000000000
Do we want to use the __KERNEL_ALIGN directive in the test in misc.c?
Eric
^ permalink raw reply [flat|nested] 60+ messages in thread* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-04-02 8:43 ` Eric W. Biederman
@ 2007-04-02 9:45 ` Vivek Goyal
2007-04-02 17:26 ` Eric W. Biederman
0 siblings, 1 reply; 60+ messages in thread
From: Vivek Goyal @ 2007-04-02 9:45 UTC (permalink / raw)
To: Eric W. Biederman; +Cc: Andrew Morton, Jurriaan, Helge Hafting, linux-kernel
On Mon, Apr 02, 2007 at 02:43:56AM -0600, Eric W. Biederman wrote:
> Vivek Goyal <vgoyal@in.ibm.com> writes:
>
> > On Sat, Mar 31, 2007 at 11:29:57PM -0700, Andrew Morton wrote:
> >> On Sun, 01 Apr 2007 00:15:51 -0600 ebiederm@xmission.com (Eric W. Biederman)
> > wrote:
> >>
> >> > Does anyone know how to express the constraint of a 2M aligned number in
> > Kconfig?
> >>
> >> Nope, but we could make CONFIG_PHYSICAL_START be in units of 2MB, which
> >> would be a bit hard to use.
> >>
> >> Adding a BUILD_BUG_ON which checks this constraint might help. Plus a
> >> useful comment right at the BUILD_BUG_ON site explaining what to do about
> >> it.
> >
> > How about attached patch?
>
> Looks like that will work.
>
> Vivek. If I can get the x86_64 vmlinux to have type ET_DYN (to mark
> it as relocatable) is there any reason to keep CONFIG_PHYSICAL_START?
Only advantage of CONFIG_PHYSICAL_START seems to be that one has got
capability to run the kernel from other addresses without modifying the
boot-loader. One can argue that now people should use a relocatable kernel
for such a feature. But for using relocatable kenrel, one needs to modify
grub, lilo and I am not sure if somebody is going to do that. Secondly, how
would one specify an address to a boot-loader to load image at?
On i386, somebody already found an interesting usage of CONFIG_PHYSICAL_START
where he was running his kernel above 16MB so that he can maximize on
DMA ZONE. Can't think of any usage for x86_64 at the moment but I think
down the line people might come up with such usages.
To me, retaining CONFIG_PHYSICAL_START gives added flexibility to the user,
at the expense of reduced simplicity. We should definitely change the type
of vmlinux to ET_DYN but at the same time it might still be worth to retain
CONFIG_PHYSICAL_START option.
> I think I can switch the vmlinux header type in about 100 lines or so
> of code. Assuming I can ever get 30 minutes with the appropriate
> kernel.
>
That would be awesome. Then vmlinux will be relocatable too. (Officially).
[..]
> > @@ -62,6 +62,14 @@ void __init x86_64_start_kernel(char * r
> > {
> > int i;
> >
> > + /*
> > + * Make sure kernel is aligned to 2MB address. Catching it at compile
> > + * time is better. Change your config file and compile the kernel
> > + * for a 2MB aligned address (CONFIG_PHYSICAL_START)
> > + */
> > + BUILD_BUG_ON(ALIGN(CONFIG_PHYSICAL_START, __KERNEL_ALIGN)
> > + != CONFIG_PHYSICAL_START);
>
> Just as a nit.
> BUILD_BUG_ON(CONFIG_PHYSICAL_START & (__KERNEL_ALIGN - 1))
> is a little shorter... Although maybe not quite as readable.
This looks better. I changed it in attached patch.
> > +
> > /* clear bss before set_intr_gate with early_idt_handler */
> > clear_bss();
> >
> > diff -puN
> > include/asm-x86_64/page.h~x86_64-check-for-config-physical-start-aligned-2M
> > include/asm-x86_64/page.h
> > ---
> > linux-2.6.21-rc5-mm3-vanilla/include/asm-x86_64/page.h~x86_64-check-for-config-physical-start-aligned-2M
> > 2007-04-02 20:50:55.000000000 +0530
> > +++ linux-2.6.21-rc5-mm3-vanilla-root/include/asm-x86_64/page.h 2007-04-02
> > 20:51:34.000000000 +0530
> > @@ -79,6 +79,7 @@ extern unsigned long phys_base;
> > #endif /* !__ASSEMBLY__ */
> >
> > #define __PHYSICAL_START CONFIG_PHYSICAL_START
> > +#define __KERNEL_ALIGN 0x200000
> > #define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
> > #define __START_KERNEL_map 0xffffffff80000000
> > #define __PAGE_OFFSET 0xffff810000000000
>
> Do we want to use the __KERNEL_ALIGN directive in the test in misc.c?
Thanks. I changed it in misc.c too.
Thanks
Vivek
o X86_64 kernel should run from 2MB aligned address for two reasons.
- Performance.
- For relocatable kernels, page tables are updated based on difference
between compile time address and load time physical address.
This difference should be multiple of 2MB as kernel text and data
is mapped using 2MB pages and PMD should be pointing to a 2MB
aligned address. Life is simpler if both compile time and load time
kernel addresses are 2MB aligned.
o Flag the error at compile time if one is trying to build a kernel which
does not meet alignment restrictions.
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
---
arch/x86_64/boot/compressed/misc.c | 2 +-
arch/x86_64/kernel/head64.c | 7 +++++++
include/asm-x86_64/page.h | 1 +
3 files changed, 9 insertions(+), 1 deletion(-)
diff -puN arch/x86_64/kernel/head64.c~x86_64-check-for-config-physical-start-aligned-2M arch/x86_64/kernel/head64.c
--- linux-2.6.21-rc5-mm3-vanilla/arch/x86_64/kernel/head64.c~x86_64-check-for-config-physical-start-aligned-2M 2007-04-02 20:46:43.000000000 +0530
+++ linux-2.6.21-rc5-mm3-vanilla-root/arch/x86_64/kernel/head64.c 2007-04-02 23:03:08.000000000 +0530
@@ -62,6 +62,13 @@ void __init x86_64_start_kernel(char * r
{
int i;
+ /*
+ * Make sure kernel is aligned to 2MB address. Catching it at compile
+ * time is better. Change your config file and compile the kernel
+ * for a 2MB aligned address (CONFIG_PHYSICAL_START)
+ */
+ BUILD_BUG_ON(CONFIG_PHYSICAL_START & (__KERNEL_ALIGN - 1));
+
/* clear bss before set_intr_gate with early_idt_handler */
clear_bss();
diff -puN include/asm-x86_64/page.h~x86_64-check-for-config-physical-start-aligned-2M include/asm-x86_64/page.h
--- linux-2.6.21-rc5-mm3-vanilla/include/asm-x86_64/page.h~x86_64-check-for-config-physical-start-aligned-2M 2007-04-02 20:50:55.000000000 +0530
+++ linux-2.6.21-rc5-mm3-vanilla-root/include/asm-x86_64/page.h 2007-04-02 20:51:34.000000000 +0530
@@ -79,6 +79,7 @@ extern unsigned long phys_base;
#endif /* !__ASSEMBLY__ */
#define __PHYSICAL_START CONFIG_PHYSICAL_START
+#define __KERNEL_ALIGN 0x200000
#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
#define __START_KERNEL_map 0xffffffff80000000
#define __PAGE_OFFSET 0xffff810000000000
diff -puN arch/x86_64/boot/compressed/misc.c~x86_64-check-for-config-physical-start-aligned-2M arch/x86_64/boot/compressed/misc.c
--- linux-2.6.21-rc5-mm3-vanilla/arch/x86_64/boot/compressed/misc.c~x86_64-check-for-config-physical-start-aligned-2M 2007-04-02 23:05:20.000000000 +0530
+++ linux-2.6.21-rc5-mm3-vanilla-root/arch/x86_64/boot/compressed/misc.c 2007-04-02 23:06:09.000000000 +0530
@@ -358,7 +358,7 @@ asmlinkage void decompress_kernel(void *
insize = input_len;
inptr = 0;
- if ((ulg)output & 0x1fffffUL)
+ if ((ulg)output & (__KERNEL_ALIGN - 1))
error("Destination address not 2M aligned");
if ((ulg)output >= 0xffffffffffUL)
error("Destination address too large");
_
^ permalink raw reply [flat|nested] 60+ messages in thread* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-04-02 9:45 ` Vivek Goyal
@ 2007-04-02 17:26 ` Eric W. Biederman
2007-04-03 4:01 ` Vivek Goyal
0 siblings, 1 reply; 60+ messages in thread
From: Eric W. Biederman @ 2007-04-02 17:26 UTC (permalink / raw)
To: vgoyal; +Cc: Andrew Morton, Jurriaan, Helge Hafting, linux-kernel
Vivek Goyal <vgoyal@in.ibm.com> writes:
> Only advantage of CONFIG_PHYSICAL_START seems to be that one has got
> capability to run the kernel from other addresses without modifying the
> boot-loader. One can argue that now people should use a relocatable kernel
> for such a feature. But for using relocatable kenrel, one needs to modify
> grub, lilo and I am not sure if somebody is going to do that. Secondly, how
> would one specify an address to a boot-loader to load image at?
I thought this was important for vmlinux and Xen?
I guess at this point the easy case is that we modify /sbin/kexec to support
it. And the other bootloaders can come be upgraded if the feature is
interesting enough.
> On i386, somebody already found an interesting usage of CONFIG_PHYSICAL_START
> where he was running his kernel above 16MB so that he can maximize on
> DMA ZONE. Can't think of any usage for x86_64 at the moment but I think
> down the line people might come up with such usages.
Agreed. We do have CONFIG_PHYSICAL_ALIGN that can handle that case,
although I admit that is a bit of a hack.
> To me, retaining CONFIG_PHYSICAL_START gives added flexibility to the user,
> at the expense of reduced simplicity. We should definitely change the type
> of vmlinux to ET_DYN but at the same time it might still be worth to retain
> CONFIG_PHYSICAL_START option.
I think something like CONFIG_PHYSICAL_START currently gives us very
little gain, and is hard to use correctly, and there are alternative
solutions. So if we can get rid of it, by only inconveniencing users
who want load their kernels at a weird address it is worth it.
>> I think I can switch the vmlinux header type in about 100 lines or so
>> of code. Assuming I can ever get 30 minutes with the appropriate
>> kernel.
>>
>
> That would be awesome. Then vmlinux will be relocatable too. (Officially).
Yes. For x86_64 I can do this. i386 is more difficult. (Although with
a little cleverness we can move the code that processes relocations into
vmlinux).
Eric
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-04-02 17:26 ` Eric W. Biederman
@ 2007-04-03 4:01 ` Vivek Goyal
2007-04-03 5:23 ` Eric W. Biederman
0 siblings, 1 reply; 60+ messages in thread
From: Vivek Goyal @ 2007-04-03 4:01 UTC (permalink / raw)
To: Eric W. Biederman
Cc: Andrew Morton, Jurriaan, Helge Hafting, linux-kernel, Magnus Damm, Horms
On Mon, Apr 02, 2007 at 11:26:38AM -0600, Eric W. Biederman wrote:
> Vivek Goyal <vgoyal@in.ibm.com> writes:
>
> > Only advantage of CONFIG_PHYSICAL_START seems to be that one has got
> > capability to run the kernel from other addresses without modifying the
> > boot-loader. One can argue that now people should use a relocatable kernel
> > for such a feature. But for using relocatable kenrel, one needs to modify
> > grub, lilo and I am not sure if somebody is going to do that. Secondly, how
> > would one specify an address to a boot-loader to load image at?
>
> I thought this was important for vmlinux and Xen?
>
Yes it is. Actually you had already mentioned it in the previous mail that's
why I did not repeat it here. Xen folks wanted to continue using vmlinux
for capturing dump. I am not sure if there is any technical limitation in
using relocatable bzImage or just that they wanted to continue using
existing working interface and did not want to switch to new interface.
Magnus, Horms, do you want to add to it? Is there a reason that relocatable
bzImage will not work in Xen env and we need to retain CONFIG_PHYSICAL_START
option in x86_64?
> I guess at this point the easy case is that we modify /sbin/kexec to support
> it. And the other bootloaders can come be upgraded if the feature is
> interesting enough.
>
> > On i386, somebody already found an interesting usage of CONFIG_PHYSICAL_START
> > where he was running his kernel above 16MB so that he can maximize on
> > DMA ZONE. Can't think of any usage for x86_64 at the moment but I think
> > down the line people might come up with such usages.
>
> Agreed. We do have CONFIG_PHYSICAL_ALIGN that can handle that case,
> although I admit that is a bit of a hack.
>
Yes, but x86_64 will not have any of those options and only way to run
kernel will be either use kexec or modify your boot-loader to so that
it can handle relocatable images.
> > To me, retaining CONFIG_PHYSICAL_START gives added flexibility to the user,
> > at the expense of reduced simplicity. We should definitely change the type
> > of vmlinux to ET_DYN but at the same time it might still be worth to retain
> > CONFIG_PHYSICAL_START option.
>
> I think something like CONFIG_PHYSICAL_START currently gives us very
> little gain, and is hard to use correctly, and there are alternative
> solutions. So if we can get rid of it, by only inconveniencing users
> who want load their kernels at a weird address it is worth it.
>
> >> I think I can switch the vmlinux header type in about 100 lines or so
> >> of code. Assuming I can ever get 30 minutes with the appropriate
> >> kernel.
> >>
> >
> > That would be awesome. Then vmlinux will be relocatable too. (Officially).
>
> Yes. For x86_64 I can do this. i386 is more difficult. (Although with
> a little cleverness we can move the code that processes relocations into
> vmlinux).
>
Performing relocations in vmlinux will be interesting. That way i386 vmlinux
too will become relocatable and only piece of puzzle to solve will be to
make vmlinux of type ET_DYN.
Thanks
Vivek
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-04-03 4:01 ` Vivek Goyal
@ 2007-04-03 5:23 ` Eric W. Biederman
2007-04-03 10:03 ` Vivek Goyal
0 siblings, 1 reply; 60+ messages in thread
From: Eric W. Biederman @ 2007-04-03 5:23 UTC (permalink / raw)
To: vgoyal
Cc: Andrew Morton, Jurriaan, Helge Hafting, linux-kernel, Magnus Damm, Horms
Vivek Goyal <vgoyal@in.ibm.com> writes:
>> I guess at this point the easy case is that we modify /sbin/kexec to support
>> it. And the other bootloaders can come be upgraded if the feature is
>> interesting enough.
>>
>> > On i386, somebody already found an interesting usage of
> CONFIG_PHYSICAL_START
>> > where he was running his kernel above 16MB so that he can maximize on
>> > DMA ZONE. Can't think of any usage for x86_64 at the moment but I think
>> > down the line people might come up with such usages.
>>
>> Agreed. We do have CONFIG_PHYSICAL_ALIGN that can handle that case,
>> although I admit that is a bit of a hack.
>>
>
> Yes, but x86_64 will not have any of those options and only way to run
> kernel will be either use kexec or modify your boot-loader to so that
> it can handle relocatable images.
True.
>> > To me, retaining CONFIG_PHYSICAL_START gives added flexibility to the user,
>> > at the expense of reduced simplicity. We should definitely change the type
>> > of vmlinux to ET_DYN but at the same time it might still be worth to retain
>> > CONFIG_PHYSICAL_START option.
>>
>> I think something like CONFIG_PHYSICAL_START currently gives us very
>> little gain, and is hard to use correctly, and there are alternative
>> solutions. So if we can get rid of it, by only inconveniencing users
>> who want load their kernels at a weird address it is worth it.
>>
>> >> I think I can switch the vmlinux header type in about 100 lines or so
>> >> of code. Assuming I can ever get 30 minutes with the appropriate
>> >> kernel.
>> >>
>> >
>> > That would be awesome. Then vmlinux will be relocatable too. (Officially).
>>
>> Yes. For x86_64 I can do this. i386 is more difficult. (Although with
>> a little cleverness we can move the code that processes relocations into
>> vmlinux).
>>
>
> Performing relocations in vmlinux will be interesting. That way i386 vmlinux
> too will become relocatable and only piece of puzzle to solve will be to
> make vmlinux of type ET_DYN.
Actually making vmlinux have type ET_DYN is the easier piece. Basically
the quick way to do this is to have an arch specific: "cmd_vmlinux__"
like uml does so we can edit things after the make.
Changing an integer in an ELF header is simple.
Inserting the code to perform the relocations feels a bit trickier but
we can probably just dump it in head.S like we do on x86_64. We still need
to insert the actual relocations to process though. Which requires all of the
post processing we currently do just called at a slightly different location.
Eric
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-04-03 5:23 ` Eric W. Biederman
@ 2007-04-03 10:03 ` Vivek Goyal
2007-04-23 5:12 ` Eric W. Biederman
0 siblings, 1 reply; 60+ messages in thread
From: Vivek Goyal @ 2007-04-03 10:03 UTC (permalink / raw)
To: Eric W. Biederman
Cc: Andrew Morton, Jurriaan, Helge Hafting, linux-kernel, Magnus Damm, Horms
On Mon, Apr 02, 2007 at 11:23:17PM -0600, Eric W. Biederman wrote:
> Vivek Goyal <vgoyal@in.ibm.com> writes:
>
> >> I guess at this point the easy case is that we modify /sbin/kexec to support
> >> it. And the other bootloaders can come be upgraded if the feature is
> >> interesting enough.
> >>
> >> > On i386, somebody already found an interesting usage of
> > CONFIG_PHYSICAL_START
> >> > where he was running his kernel above 16MB so that he can maximize on
> >> > DMA ZONE. Can't think of any usage for x86_64 at the moment but I think
> >> > down the line people might come up with such usages.
> >>
> >> Agreed. We do have CONFIG_PHYSICAL_ALIGN that can handle that case,
> >> although I admit that is a bit of a hack.
> >>
> >
> > Yes, but x86_64 will not have any of those options and only way to run
> > kernel will be either use kexec or modify your boot-loader to so that
> > it can handle relocatable images.
>
> True.
>
> >> > To me, retaining CONFIG_PHYSICAL_START gives added flexibility to the user,
> >> > at the expense of reduced simplicity. We should definitely change the type
> >> > of vmlinux to ET_DYN but at the same time it might still be worth to retain
> >> > CONFIG_PHYSICAL_START option.
> >>
> >> I think something like CONFIG_PHYSICAL_START currently gives us very
> >> little gain, and is hard to use correctly, and there are alternative
> >> solutions. So if we can get rid of it, by only inconveniencing users
> >> who want load their kernels at a weird address it is worth it.
> >>
> >> >> I think I can switch the vmlinux header type in about 100 lines or so
> >> >> of code. Assuming I can ever get 30 minutes with the appropriate
> >> >> kernel.
> >> >>
> >> >
> >> > That would be awesome. Then vmlinux will be relocatable too. (Officially).
> >>
> >> Yes. For x86_64 I can do this. i386 is more difficult. (Although with
> >> a little cleverness we can move the code that processes relocations into
> >> vmlinux).
> >>
> >
> > Performing relocations in vmlinux will be interesting. That way i386 vmlinux
> > too will become relocatable and only piece of puzzle to solve will be to
> > make vmlinux of type ET_DYN.
>
> Actually making vmlinux have type ET_DYN is the easier piece. Basically
> the quick way to do this is to have an arch specific: "cmd_vmlinux__"
> like uml does so we can edit things after the make.
>
> Changing an integer in an ELF header is simple.
>
> Inserting the code to perform the relocations feels a bit trickier but
> we can probably just dump it in head.S like we do on x86_64. We still need
> to insert the actual relocations to process though. Which requires all of the
> post processing we currently do just called at a slightly different location.
Something like what kallsyms does? Read .tmp_vmlinux2, extract and
filter relocations, pack them in relocs.S, build reloc.o and relink it back
to .tmp_vmlinux2 to make vmlinux. Then arch/i386/kernel/head.S can perform
the relocations. But any additiona step of re-linking after final kallsyms
information has been generated can potentially spoil kallsyms data?
Thanks
Vivek
^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 1/2] x86_64: Reflect the relocatability of the kernel in the ELF header.
2007-04-03 10:03 ` Vivek Goyal
@ 2007-04-23 5:12 ` Eric W. Biederman
0 siblings, 0 replies; 60+ messages in thread
From: Eric W. Biederman @ 2007-04-23 5:12 UTC (permalink / raw)
To: Andrew Morton, Andi Kleen
Cc: vgoyal, Jurriaan, Helge Hafting, linux-kernel, Magnus Damm,
Horms, thunder7, fastboot, Kexec Mailing List
Currently because vmlinux does not reflect that the kernel is relocatable
we still have to support CONFIG_PHYSICAL_START. So this patch adds a small
c program to do what we cannot do with a linker script, set the elf header
type to ET_DYN.
This should remove the last obstacle to removing CONFIG_PHYSICAL_START
on x86_64.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
---
arch/x86_64/Kconfig | 4 +++
arch/x86_64/Makefile | 10 +++++++
scripts/Makefile | 11 ++++---
scripts/mketrel.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 90 insertions(+), 5 deletions(-)
create mode 100644 scripts/mketrel.c
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 16d9bf3..773b487 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -121,6 +121,10 @@ config ARCH_HAS_ILOG2_U64
bool
default n
+config ELF_RELOCATABLE
+ bool
+ default y
+
source "init/Kconfig"
diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile
index 9dd91b2..5ae79ab 100644
--- a/arch/x86_64/Makefile
+++ b/arch/x86_64/Makefile
@@ -124,6 +124,16 @@ define archhelp
echo ' isoimage - Create a boot CD-ROM image'
endef
+ifeq ($(CONFIG_RELOCATABLE),y)
+define cmd_vmlinux__
+ $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
+ -T $(vmlinux-lds) $(vmlinux-init) \
+ --start-group $(vmlinux-main) --end-group \
+ $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) FORCE ,$^) \
+ && scripts/mketrel $@
+endef
+endif
+
CLEAN_FILES += arch/$(ARCH)/boot/fdimage \
arch/$(ARCH)/boot/image.iso \
arch/$(ARCH)/boot/mtools.conf
diff --git a/scripts/Makefile b/scripts/Makefile
index 1c73c5a..ddba550 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -7,11 +7,12 @@
# conmakehash: Create chartable
# conmakehash: Create arrays for initializing the kernel console tables
-hostprogs-$(CONFIG_KALLSYMS) += kallsyms
-hostprogs-$(CONFIG_LOGO) += pnmtologo
-hostprogs-$(CONFIG_VT) += conmakehash
-hostprogs-$(CONFIG_PROM_CONSOLE) += conmakehash
-hostprogs-$(CONFIG_IKCONFIG) += bin2c
+hostprogs-$(CONFIG_KALLSYMS) += kallsyms
+hostprogs-$(CONFIG_LOGO) += pnmtologo
+hostprogs-$(CONFIG_VT) += conmakehash
+hostprogs-$(CONFIG_PROM_CONSOLE) += conmakehash
+hostprogs-$(CONFIG_IKCONFIG) += bin2c
+hostprogs-$(CONFIG_ELF_RELOCATABLE) += mketrel
always := $(hostprogs-y) $(hostprogs-m)
diff --git a/scripts/mketrel.c b/scripts/mketrel.c
new file mode 100644
index 0000000..effa312
--- /dev/null
+++ b/scripts/mketrel.c
@@ -0,0 +1,70 @@
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <elf.h>
+#include <stdio.h>
+#include <errno.h>
+#include <string.h>
+#include <stdarg.h>
+#include <stdlib.h>
+
+static int fd;
+unsigned char e_ident[EI_NIDENT];
+
+void die(const char * str, ...)
+{
+ va_list args;
+ va_start(args, str);
+ vfprintf(stderr, str, args);
+ fputc('\n', stderr);
+ exit(1);
+}
+
+void file_open(const char *name)
+{
+ if ((fd = open(name, O_RDWR, 0)) < 0)
+ die("Unable to open `%s': %m", name);
+}
+
+static void mketrel(void)
+{
+ unsigned char e_type[2];
+ if (read(fd, &e_ident, sizeof(e_ident)) != sizeof(e_ident))
+ die("Cannot read ELF header: %s\n", strerror(errno));
+
+ if (memcmp(e_ident, ELFMAG, 4) != 0)
+ die("No ELF magic\n");
+
+ if ((e_ident[EI_CLASS] != ELFCLASS64) &&
+ (e_ident[EI_CLASS] != ELFCLASS32))
+ die("Unrecognized ELF class: %x\n", e_ident[EI_CLASS]);
+
+ if ((e_ident[EI_DATA] != ELFDATA2LSB) &&
+ (e_ident[EI_DATA] != ELFDATA2MSB))
+ die("Unrecognized ELF data encoding: %x\n", e_ident[EI_DATA]);
+
+ if (e_ident[EI_VERSION] != EV_CURRENT)
+ die("Unknown ELF version: %d\n", e_ident[EI_VERSION]);
+
+ if (e_ident[EI_DATA] == ELFDATA2LSB) {
+ e_type[0] = ET_REL & 0xff;
+ e_type[1] = ET_REL >> 8;
+ } else {
+ e_type[1] = ET_REL & 0xff;
+ e_type[0] = ET_REL >> 8;
+ }
+
+ if (write(fd, &e_type, sizeof(e_type)) != sizeof(e_type))
+ die("Cannot write ELF type: %s\n", strerror(errno));
+}
+
+int main(int argc, char **argv)
+{
+ if (argc != 2)
+ die("Usage: mketrel: vmlinux");
+ file_open(argv[1]);
+ mketrel();
+ close(fd);
+ return 0;
+}
--
1.5.1.1.181.g2de0
^ permalink raw reply related [flat|nested] 60+ messages in thread* [PATCH 1/2] x86_64: Reflect the relocatability of the kernel in the ELF header.
@ 2007-04-23 5:12 ` Eric W. Biederman
0 siblings, 0 replies; 60+ messages in thread
From: Eric W. Biederman @ 2007-04-23 5:12 UTC (permalink / raw)
To: Andrew Morton, Andi Kleen
Cc: fastboot, Horms, linux-kernel, Kexec Mailing List, Helge Hafting,
thunder7, Magnus Damm, vgoyal
Currently because vmlinux does not reflect that the kernel is relocatable
we still have to support CONFIG_PHYSICAL_START. So this patch adds a small
c program to do what we cannot do with a linker script, set the elf header
type to ET_DYN.
This should remove the last obstacle to removing CONFIG_PHYSICAL_START
on x86_64.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
---
arch/x86_64/Kconfig | 4 +++
arch/x86_64/Makefile | 10 +++++++
scripts/Makefile | 11 ++++---
scripts/mketrel.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 90 insertions(+), 5 deletions(-)
create mode 100644 scripts/mketrel.c
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 16d9bf3..773b487 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -121,6 +121,10 @@ config ARCH_HAS_ILOG2_U64
bool
default n
+config ELF_RELOCATABLE
+ bool
+ default y
+
source "init/Kconfig"
diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile
index 9dd91b2..5ae79ab 100644
--- a/arch/x86_64/Makefile
+++ b/arch/x86_64/Makefile
@@ -124,6 +124,16 @@ define archhelp
echo ' isoimage - Create a boot CD-ROM image'
endef
+ifeq ($(CONFIG_RELOCATABLE),y)
+define cmd_vmlinux__
+ $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
+ -T $(vmlinux-lds) $(vmlinux-init) \
+ --start-group $(vmlinux-main) --end-group \
+ $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) FORCE ,$^) \
+ && scripts/mketrel $@
+endef
+endif
+
CLEAN_FILES += arch/$(ARCH)/boot/fdimage \
arch/$(ARCH)/boot/image.iso \
arch/$(ARCH)/boot/mtools.conf
diff --git a/scripts/Makefile b/scripts/Makefile
index 1c73c5a..ddba550 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -7,11 +7,12 @@
# conmakehash: Create chartable
# conmakehash: Create arrays for initializing the kernel console tables
-hostprogs-$(CONFIG_KALLSYMS) += kallsyms
-hostprogs-$(CONFIG_LOGO) += pnmtologo
-hostprogs-$(CONFIG_VT) += conmakehash
-hostprogs-$(CONFIG_PROM_CONSOLE) += conmakehash
-hostprogs-$(CONFIG_IKCONFIG) += bin2c
+hostprogs-$(CONFIG_KALLSYMS) += kallsyms
+hostprogs-$(CONFIG_LOGO) += pnmtologo
+hostprogs-$(CONFIG_VT) += conmakehash
+hostprogs-$(CONFIG_PROM_CONSOLE) += conmakehash
+hostprogs-$(CONFIG_IKCONFIG) += bin2c
+hostprogs-$(CONFIG_ELF_RELOCATABLE) += mketrel
always := $(hostprogs-y) $(hostprogs-m)
diff --git a/scripts/mketrel.c b/scripts/mketrel.c
new file mode 100644
index 0000000..effa312
--- /dev/null
+++ b/scripts/mketrel.c
@@ -0,0 +1,70 @@
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <elf.h>
+#include <stdio.h>
+#include <errno.h>
+#include <string.h>
+#include <stdarg.h>
+#include <stdlib.h>
+
+static int fd;
+unsigned char e_ident[EI_NIDENT];
+
+void die(const char * str, ...)
+{
+ va_list args;
+ va_start(args, str);
+ vfprintf(stderr, str, args);
+ fputc('\n', stderr);
+ exit(1);
+}
+
+void file_open(const char *name)
+{
+ if ((fd = open(name, O_RDWR, 0)) < 0)
+ die("Unable to open `%s': %m", name);
+}
+
+static void mketrel(void)
+{
+ unsigned char e_type[2];
+ if (read(fd, &e_ident, sizeof(e_ident)) != sizeof(e_ident))
+ die("Cannot read ELF header: %s\n", strerror(errno));
+
+ if (memcmp(e_ident, ELFMAG, 4) != 0)
+ die("No ELF magic\n");
+
+ if ((e_ident[EI_CLASS] != ELFCLASS64) &&
+ (e_ident[EI_CLASS] != ELFCLASS32))
+ die("Unrecognized ELF class: %x\n", e_ident[EI_CLASS]);
+
+ if ((e_ident[EI_DATA] != ELFDATA2LSB) &&
+ (e_ident[EI_DATA] != ELFDATA2MSB))
+ die("Unrecognized ELF data encoding: %x\n", e_ident[EI_DATA]);
+
+ if (e_ident[EI_VERSION] != EV_CURRENT)
+ die("Unknown ELF version: %d\n", e_ident[EI_VERSION]);
+
+ if (e_ident[EI_DATA] == ELFDATA2LSB) {
+ e_type[0] = ET_REL & 0xff;
+ e_type[1] = ET_REL >> 8;
+ } else {
+ e_type[1] = ET_REL & 0xff;
+ e_type[0] = ET_REL >> 8;
+ }
+
+ if (write(fd, &e_type, sizeof(e_type)) != sizeof(e_type))
+ die("Cannot write ELF type: %s\n", strerror(errno));
+}
+
+int main(int argc, char **argv)
+{
+ if (argc != 2)
+ die("Usage: mketrel: vmlinux");
+ file_open(argv[1]);
+ mketrel();
+ close(fd);
+ return 0;
+}
--
1.5.1.1.181.g2de0
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply related [flat|nested] 60+ messages in thread* [PATCH 2/2] x86_64: Remove CONFIG_PHYSICAL_START and CONFIG_RELOCATABLE
2007-04-23 5:12 ` Eric W. Biederman
@ 2007-04-23 5:15 ` Eric W. Biederman
-1 siblings, 0 replies; 60+ messages in thread
From: Eric W. Biederman @ 2007-04-23 5:15 UTC (permalink / raw)
To: Andrew Morton, Andi Kleen
Cc: vgoyal, Jurriaan, Helge Hafting, linux-kernel, Magnus Damm,
Horms, fastboot, Kexec Mailing List
Now that the vmlinux is marked as relocatable there is no reason to
retain the CONFIG_PHYSICAL_START option, as we can put the binary we
have at any 2MB aligned address in memory.
With CONFIG_PHYSICAL_START gone the handful of code lines that depend
on CONFIG_RELOCATABLE no longer make sense to be conditional and can
be removed.
The big win of this patch (besides Kconfig simplicity) is that the
nasty BUILD_BUG_ON test for people misaligning their kernel when using
CONFIG_PHYSICAL_START can be removed as this case can only happen with
CONFIG_PHYSICAL_START selected.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
---
arch/x86_64/Kconfig | 55 +-----------------------------------
arch/x86_64/Makefile | 2 -
arch/x86_64/boot/compressed/head.S | 13 +--------
arch/x86_64/boot/setup.S | 4 --
arch/x86_64/defconfig | 2 -
arch/x86_64/kernel/head64.c | 7 ----
include/asm-x86_64/page.h | 2 +-
7 files changed, 3 insertions(+), 82 deletions(-)
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 773b487..713c1ad 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -565,62 +565,9 @@ config CRASH_DUMP
which are loaded in the main kernel with kexec-tools into
a specially reserved region and then later executed after
a crash by kdump/kexec. The crash dump kernel must be compiled
- to a memory address not used by the main kernel or BIOS using
- PHYSICAL_START.
+ to a memory address not used by the main kernel or BIOS
For more details see Documentation/kdump/kdump.txt
-config RELOCATABLE
- bool "Build a relocatable kernel(EXPERIMENTAL)"
- depends on EXPERIMENTAL
- help
- Builds a relocatable kernel. This enables loading and running
- a kernel binary from a different physical address than it has
- been compiled for.
-
- One use is for the kexec on panic case where the recovery kernel
- must live at a different physical address than the primary
- kernel.
-
- Note: If CONFIG_RELOCATABLE=y, then kernel run from the address
- it has been loaded at and compile time physical address
- (CONFIG_PHYSICAL_START) is ignored.
-
-config PHYSICAL_START
- hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
- default "0x200000"
- help
- This gives the physical address where the kernel is loaded. It
- should be aligned to 2MB boundary.
-
- If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
- bzImage will decompress itself to above physical address and
- run from there. Otherwise, bzImage will run from the address where
- it has been loaded by the boot loader and will ignore above physical
- address.
-
- In normal kdump cases one does not have to set/change this option
- as now bzImage can be compiled as a completely relocatable image
- (CONFIG_RELOCATABLE=y) and be used to load and run from a different
- address. This option is mainly useful for the folks who don't want
- to use a bzImage for capturing the crash dump and want to use a
- vmlinux instead.
-
- So if you are using bzImage for capturing the crash dump, leave
- the value here unchanged to 0x200000 and set CONFIG_RELOCATABLE=y.
- Otherwise if you plan to use vmlinux for capturing the crash dump
- change this value to start of the reserved region (Typically 16MB
- 0x1000000). In other words, it can be set based on the "X" value as
- specified in the "crashkernel=YM@XM" command line boot parameter
- passed to the panic-ed kernel. Typically this parameter is set as
- crashkernel=64M@16M. Please take a look at
- Documentation/kdump/kdump.txt for more details about crash dumps.
-
- Usage of bzImage for capturing the crash dump is advantageous as
- one does not have to build two kernels. Same kernel can be used
- as production kernel and capture kernel.
-
- Don't change this unless you know what you are doing.
-
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
depends on PROC_FS
diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile
index 5ae79ab..5d96f4f 100644
--- a/arch/x86_64/Makefile
+++ b/arch/x86_64/Makefile
@@ -124,7 +124,6 @@ define archhelp
echo ' isoimage - Create a boot CD-ROM image'
endef
-ifeq ($(CONFIG_RELOCATABLE),y)
define cmd_vmlinux__
$(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
-T $(vmlinux-lds) $(vmlinux-init) \
@@ -132,7 +131,6 @@ define cmd_vmlinux__
$(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) FORCE ,$^) \
&& scripts/mketrel $@
endef
-endif
CLEAN_FILES += arch/$(ARCH)/boot/fdimage \
arch/$(ARCH)/boot/image.iso \
diff --git a/arch/x86_64/boot/compressed/head.S b/arch/x86_64/boot/compressed/head.S
index f9d5692..493723e 100644
--- a/arch/x86_64/boot/compressed/head.S
+++ b/arch/x86_64/boot/compressed/head.S
@@ -71,13 +71,9 @@ startup_32:
* for safe in-place decompression.
*/
-#ifdef CONFIG_RELOCATABLE
movl %ebp, %ebx
addl $(LARGE_PAGE_SIZE -1), %ebx
andl $LARGE_PAGE_MASK, %ebx
-#else
- movl $CONFIG_PHYSICAL_START, %ebx
-#endif
/* Replace the compressed data size with the uncompressed size */
subl input_len(%ebp), %ebx
@@ -200,21 +196,14 @@ ENTRY(startup_64)
* we were loaded at aligned to a 2M boundary. %rbp contains the
* decompressed kernel start address.
*
- * If it is a relocatable kernel then decompress and run the kernel
- * from load address aligned to 2MB addr, otherwise decompress and
- * run the kernel from CONFIG_PHYSICAL_START
+ * Decompress and run the kernel from load address aligned to 2MB addr
*/
/* Start with the delta to where the kernel will run at. */
-#ifdef CONFIG_RELOCATABLE
leaq startup_32(%rip) /* - $startup_32 */, %rbp
addq $(LARGE_PAGE_SIZE - 1), %rbp
andq $LARGE_PAGE_MASK, %rbp
movq %rbp, %rbx
-#else
- movq $CONFIG_PHYSICAL_START, %rbp
- movq %rbp, %rbx
-#endif
/* Replace the compressed data size with the uncompressed size */
movl input_len(%rip), %eax
diff --git a/arch/x86_64/boot/setup.S b/arch/x86_64/boot/setup.S
index 4f88510..8a70c92 100644
--- a/arch/x86_64/boot/setup.S
+++ b/arch/x86_64/boot/setup.S
@@ -158,11 +158,7 @@ cmd_line_ptr: .long 0 # (Header version 0x0202 or later)
ramdisk_max: .long 0xffffffff
kernel_alignment: .long 0x200000 # physical addr alignment required for
# protected mode relocatable kernel
-#ifdef CONFIG_RELOCATABLE
relocatable_kernel: .byte 1
-#else
-relocatable_kernel: .byte 0
-#endif
pad2: .byte 0
pad3: .word 0
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index 90c5a9d..d977bcb 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -174,8 +174,6 @@ CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
diff --git a/arch/x86_64/kernel/head64.c b/arch/x86_64/kernel/head64.c
index 213d90e..6c34bdd 100644
--- a/arch/x86_64/kernel/head64.c
+++ b/arch/x86_64/kernel/head64.c
@@ -62,13 +62,6 @@ void __init x86_64_start_kernel(char * real_mode_data)
{
int i;
- /*
- * Make sure kernel is aligned to 2MB address. Catching it at compile
- * time is better. Change your config file and compile the kernel
- * for a 2MB aligned address (CONFIG_PHYSICAL_START)
- */
- BUILD_BUG_ON(CONFIG_PHYSICAL_START & (__KERNEL_ALIGN - 1));
-
/* clear bss before set_intr_gate with early_idt_handler */
clear_bss();
diff --git a/include/asm-x86_64/page.h b/include/asm-x86_64/page.h
index 7bb725f..20662ab 100644
--- a/include/asm-x86_64/page.h
+++ b/include/asm-x86_64/page.h
@@ -78,7 +78,7 @@ extern unsigned long phys_base;
#endif /* !__ASSEMBLY__ */
-#define __PHYSICAL_START CONFIG_PHYSICAL_START
+#define __PHYSICAL_START 0x200000
#define __KERNEL_ALIGN 0x200000
#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
#define __START_KERNEL_map 0xffffffff80000000
--
1.5.1.1.181.g2de0
^ permalink raw reply related [flat|nested] 60+ messages in thread* [PATCH 2/2] x86_64: Remove CONFIG_PHYSICAL_START and CONFIG_RELOCATABLE
@ 2007-04-23 5:15 ` Eric W. Biederman
0 siblings, 0 replies; 60+ messages in thread
From: Eric W. Biederman @ 2007-04-23 5:15 UTC (permalink / raw)
To: Andrew Morton, Andi Kleen
Cc: fastboot, Horms, linux-kernel, Kexec Mailing List, Helge Hafting,
Jurriaan, Magnus Damm, vgoyal
Now that the vmlinux is marked as relocatable there is no reason to
retain the CONFIG_PHYSICAL_START option, as we can put the binary we
have at any 2MB aligned address in memory.
With CONFIG_PHYSICAL_START gone the handful of code lines that depend
on CONFIG_RELOCATABLE no longer make sense to be conditional and can
be removed.
The big win of this patch (besides Kconfig simplicity) is that the
nasty BUILD_BUG_ON test for people misaligning their kernel when using
CONFIG_PHYSICAL_START can be removed as this case can only happen with
CONFIG_PHYSICAL_START selected.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
---
arch/x86_64/Kconfig | 55 +-----------------------------------
arch/x86_64/Makefile | 2 -
arch/x86_64/boot/compressed/head.S | 13 +--------
arch/x86_64/boot/setup.S | 4 --
arch/x86_64/defconfig | 2 -
arch/x86_64/kernel/head64.c | 7 ----
include/asm-x86_64/page.h | 2 +-
7 files changed, 3 insertions(+), 82 deletions(-)
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 773b487..713c1ad 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -565,62 +565,9 @@ config CRASH_DUMP
which are loaded in the main kernel with kexec-tools into
a specially reserved region and then later executed after
a crash by kdump/kexec. The crash dump kernel must be compiled
- to a memory address not used by the main kernel or BIOS using
- PHYSICAL_START.
+ to a memory address not used by the main kernel or BIOS
For more details see Documentation/kdump/kdump.txt
-config RELOCATABLE
- bool "Build a relocatable kernel(EXPERIMENTAL)"
- depends on EXPERIMENTAL
- help
- Builds a relocatable kernel. This enables loading and running
- a kernel binary from a different physical address than it has
- been compiled for.
-
- One use is for the kexec on panic case where the recovery kernel
- must live at a different physical address than the primary
- kernel.
-
- Note: If CONFIG_RELOCATABLE=y, then kernel run from the address
- it has been loaded at and compile time physical address
- (CONFIG_PHYSICAL_START) is ignored.
-
-config PHYSICAL_START
- hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
- default "0x200000"
- help
- This gives the physical address where the kernel is loaded. It
- should be aligned to 2MB boundary.
-
- If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
- bzImage will decompress itself to above physical address and
- run from there. Otherwise, bzImage will run from the address where
- it has been loaded by the boot loader and will ignore above physical
- address.
-
- In normal kdump cases one does not have to set/change this option
- as now bzImage can be compiled as a completely relocatable image
- (CONFIG_RELOCATABLE=y) and be used to load and run from a different
- address. This option is mainly useful for the folks who don't want
- to use a bzImage for capturing the crash dump and want to use a
- vmlinux instead.
-
- So if you are using bzImage for capturing the crash dump, leave
- the value here unchanged to 0x200000 and set CONFIG_RELOCATABLE=y.
- Otherwise if you plan to use vmlinux for capturing the crash dump
- change this value to start of the reserved region (Typically 16MB
- 0x1000000). In other words, it can be set based on the "X" value as
- specified in the "crashkernel=YM@XM" command line boot parameter
- passed to the panic-ed kernel. Typically this parameter is set as
- crashkernel=64M@16M. Please take a look at
- Documentation/kdump/kdump.txt for more details about crash dumps.
-
- Usage of bzImage for capturing the crash dump is advantageous as
- one does not have to build two kernels. Same kernel can be used
- as production kernel and capture kernel.
-
- Don't change this unless you know what you are doing.
-
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
depends on PROC_FS
diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile
index 5ae79ab..5d96f4f 100644
--- a/arch/x86_64/Makefile
+++ b/arch/x86_64/Makefile
@@ -124,7 +124,6 @@ define archhelp
echo ' isoimage - Create a boot CD-ROM image'
endef
-ifeq ($(CONFIG_RELOCATABLE),y)
define cmd_vmlinux__
$(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
-T $(vmlinux-lds) $(vmlinux-init) \
@@ -132,7 +131,6 @@ define cmd_vmlinux__
$(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) FORCE ,$^) \
&& scripts/mketrel $@
endef
-endif
CLEAN_FILES += arch/$(ARCH)/boot/fdimage \
arch/$(ARCH)/boot/image.iso \
diff --git a/arch/x86_64/boot/compressed/head.S b/arch/x86_64/boot/compressed/head.S
index f9d5692..493723e 100644
--- a/arch/x86_64/boot/compressed/head.S
+++ b/arch/x86_64/boot/compressed/head.S
@@ -71,13 +71,9 @@ startup_32:
* for safe in-place decompression.
*/
-#ifdef CONFIG_RELOCATABLE
movl %ebp, %ebx
addl $(LARGE_PAGE_SIZE -1), %ebx
andl $LARGE_PAGE_MASK, %ebx
-#else
- movl $CONFIG_PHYSICAL_START, %ebx
-#endif
/* Replace the compressed data size with the uncompressed size */
subl input_len(%ebp), %ebx
@@ -200,21 +196,14 @@ ENTRY(startup_64)
* we were loaded at aligned to a 2M boundary. %rbp contains the
* decompressed kernel start address.
*
- * If it is a relocatable kernel then decompress and run the kernel
- * from load address aligned to 2MB addr, otherwise decompress and
- * run the kernel from CONFIG_PHYSICAL_START
+ * Decompress and run the kernel from load address aligned to 2MB addr
*/
/* Start with the delta to where the kernel will run at. */
-#ifdef CONFIG_RELOCATABLE
leaq startup_32(%rip) /* - $startup_32 */, %rbp
addq $(LARGE_PAGE_SIZE - 1), %rbp
andq $LARGE_PAGE_MASK, %rbp
movq %rbp, %rbx
-#else
- movq $CONFIG_PHYSICAL_START, %rbp
- movq %rbp, %rbx
-#endif
/* Replace the compressed data size with the uncompressed size */
movl input_len(%rip), %eax
diff --git a/arch/x86_64/boot/setup.S b/arch/x86_64/boot/setup.S
index 4f88510..8a70c92 100644
--- a/arch/x86_64/boot/setup.S
+++ b/arch/x86_64/boot/setup.S
@@ -158,11 +158,7 @@ cmd_line_ptr: .long 0 # (Header version 0x0202 or later)
ramdisk_max: .long 0xffffffff
kernel_alignment: .long 0x200000 # physical addr alignment required for
# protected mode relocatable kernel
-#ifdef CONFIG_RELOCATABLE
relocatable_kernel: .byte 1
-#else
-relocatable_kernel: .byte 0
-#endif
pad2: .byte 0
pad3: .word 0
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index 90c5a9d..d977bcb 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -174,8 +174,6 @@ CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
diff --git a/arch/x86_64/kernel/head64.c b/arch/x86_64/kernel/head64.c
index 213d90e..6c34bdd 100644
--- a/arch/x86_64/kernel/head64.c
+++ b/arch/x86_64/kernel/head64.c
@@ -62,13 +62,6 @@ void __init x86_64_start_kernel(char * real_mode_data)
{
int i;
- /*
- * Make sure kernel is aligned to 2MB address. Catching it at compile
- * time is better. Change your config file and compile the kernel
- * for a 2MB aligned address (CONFIG_PHYSICAL_START)
- */
- BUILD_BUG_ON(CONFIG_PHYSICAL_START & (__KERNEL_ALIGN - 1));
-
/* clear bss before set_intr_gate with early_idt_handler */
clear_bss();
diff --git a/include/asm-x86_64/page.h b/include/asm-x86_64/page.h
index 7bb725f..20662ab 100644
--- a/include/asm-x86_64/page.h
+++ b/include/asm-x86_64/page.h
@@ -78,7 +78,7 @@ extern unsigned long phys_base;
#endif /* !__ASSEMBLY__ */
-#define __PHYSICAL_START CONFIG_PHYSICAL_START
+#define __PHYSICAL_START 0x200000
#define __KERNEL_ALIGN 0x200000
#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
#define __START_KERNEL_map 0xffffffff80000000
--
1.5.1.1.181.g2de0
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply related [flat|nested] 60+ messages in thread* Re: [PATCH 2/2] x86_64: Remove CONFIG_PHYSICAL_START and CONFIG_RELOCATABLE
2007-04-23 5:15 ` Eric W. Biederman
@ 2007-04-23 6:07 ` Vivek Goyal
-1 siblings, 0 replies; 60+ messages in thread
From: Vivek Goyal @ 2007-04-23 6:07 UTC (permalink / raw)
To: Eric W. Biederman
Cc: Andrew Morton, Andi Kleen, Jurriaan, Helge Hafting, linux-kernel,
Magnus Damm, Horms, fastboot, Kexec Mailing List
On Sun, Apr 22, 2007 at 11:15:48PM -0600, Eric W. Biederman wrote:
>
> Now that the vmlinux is marked as relocatable there is no reason to
> retain the CONFIG_PHYSICAL_START option, as we can put the binary we
> have at any 2MB aligned address in memory.
>
> With CONFIG_PHYSICAL_START gone the handful of code lines that depend
> on CONFIG_RELOCATABLE no longer make sense to be conditional and can
> be removed.
>
> The big win of this patch (besides Kconfig simplicity) is that the
> nasty BUILD_BUG_ON test for people misaligning their kernel when using
> CONFIG_PHYSICAL_START can be removed as this case can only happen with
> CONFIG_PHYSICAL_START selected.
>
> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
> ---
> arch/x86_64/Kconfig | 55 +-----------------------------------
> arch/x86_64/Makefile | 2 -
> arch/x86_64/boot/compressed/head.S | 13 +--------
> arch/x86_64/boot/setup.S | 4 --
> arch/x86_64/defconfig | 2 -
> arch/x86_64/kernel/head64.c | 7 ----
> include/asm-x86_64/page.h | 2 +-
> 7 files changed, 3 insertions(+), 82 deletions(-)
>
> diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
> index 773b487..713c1ad 100644
> --- a/arch/x86_64/Kconfig
> +++ b/arch/x86_64/Kconfig
> @@ -565,62 +565,9 @@ config CRASH_DUMP
> which are loaded in the main kernel with kexec-tools into
> a specially reserved region and then later executed after
> a crash by kdump/kexec. The crash dump kernel must be compiled
> - to a memory address not used by the main kernel or BIOS using
> - PHYSICAL_START.
> + to a memory address not used by the main kernel or BIOS
> For more details see Documentation/kdump/kdump.txt
Hi Eric,
I think "must be compiled" should be replaced with "must be loaded" now.
Otherwise both the patches look fine. I am planning to test these.
This change will also require modifications to Documentation/kdump/kdump.txt
file.
Thanks
Vivek
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH 2/2] x86_64: Remove CONFIG_PHYSICAL_START and CONFIG_RELOCATABLE
@ 2007-04-23 6:07 ` Vivek Goyal
0 siblings, 0 replies; 60+ messages in thread
From: Vivek Goyal @ 2007-04-23 6:07 UTC (permalink / raw)
To: Eric W. Biederman
Cc: fastboot, Kexec Mailing List, Jurriaan, linux-kernel,
Magnus Damm, Helge Hafting, Horms, Andrew Morton, Andi Kleen
On Sun, Apr 22, 2007 at 11:15:48PM -0600, Eric W. Biederman wrote:
>
> Now that the vmlinux is marked as relocatable there is no reason to
> retain the CONFIG_PHYSICAL_START option, as we can put the binary we
> have at any 2MB aligned address in memory.
>
> With CONFIG_PHYSICAL_START gone the handful of code lines that depend
> on CONFIG_RELOCATABLE no longer make sense to be conditional and can
> be removed.
>
> The big win of this patch (besides Kconfig simplicity) is that the
> nasty BUILD_BUG_ON test for people misaligning their kernel when using
> CONFIG_PHYSICAL_START can be removed as this case can only happen with
> CONFIG_PHYSICAL_START selected.
>
> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
> ---
> arch/x86_64/Kconfig | 55 +-----------------------------------
> arch/x86_64/Makefile | 2 -
> arch/x86_64/boot/compressed/head.S | 13 +--------
> arch/x86_64/boot/setup.S | 4 --
> arch/x86_64/defconfig | 2 -
> arch/x86_64/kernel/head64.c | 7 ----
> include/asm-x86_64/page.h | 2 +-
> 7 files changed, 3 insertions(+), 82 deletions(-)
>
> diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
> index 773b487..713c1ad 100644
> --- a/arch/x86_64/Kconfig
> +++ b/arch/x86_64/Kconfig
> @@ -565,62 +565,9 @@ config CRASH_DUMP
> which are loaded in the main kernel with kexec-tools into
> a specially reserved region and then later executed after
> a crash by kdump/kexec. The crash dump kernel must be compiled
> - to a memory address not used by the main kernel or BIOS using
> - PHYSICAL_START.
> + to a memory address not used by the main kernel or BIOS
> For more details see Documentation/kdump/kdump.txt
Hi Eric,
I think "must be compiled" should be replaced with "must be loaded" now.
Otherwise both the patches look fine. I am planning to test these.
This change will also require modifications to Documentation/kdump/kdump.txt
file.
Thanks
Vivek
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH 2/2] x86_64: Remove CONFIG_PHYSICAL_START and CONFIG_RELOCATABLE
2007-04-23 6:07 ` Vivek Goyal
@ 2007-04-23 6:17 ` Eric W. Biederman
-1 siblings, 0 replies; 60+ messages in thread
From: Eric W. Biederman @ 2007-04-23 6:17 UTC (permalink / raw)
To: vgoyal
Cc: Andrew Morton, Andi Kleen, Jurriaan, Helge Hafting, linux-kernel,
Magnus Damm, Horms, fastboot, Kexec Mailing List
Vivek Goyal <vgoyal@in.ibm.com> writes:
> On Sun, Apr 22, 2007 at 11:15:48PM -0600, Eric W. Biederman wrote:
>> +++ b/arch/x86_64/Kconfig
>> @@ -565,62 +565,9 @@ config CRASH_DUMP
>> which are loaded in the main kernel with kexec-tools into
>> a specially reserved region and then later executed after
>> a crash by kdump/kexec. The crash dump kernel must be compiled
>> - to a memory address not used by the main kernel or BIOS using
>> - PHYSICAL_START.
>> + to a memory address not used by the main kernel or BIOS
>> For more details see Documentation/kdump/kdump.txt
>
> Hi Eric,
>
> I think "must be compiled" should be replaced with "must be loaded" now.
Yes, that sounds right. Ugh. I didn't look at enough context to read
the whole sentence. I just killed the part about PHYSICAL_START.
> Otherwise both the patches look fine. I am planning to test these.
>
> This change will also require modifications to Documentation/kdump/kdump.txt
> file.
Do you think you can generate the patch fix up the CONFIG_CRASH_DUMP
and kdump.txt documentation.
I was just interested enough to spend the 15 minutes needed to generate
this patch. I don't think I care enough to dot the i's and cross the t's
in the documentation.
Eric
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH 2/2] x86_64: Remove CONFIG_PHYSICAL_START and CONFIG_RELOCATABLE
@ 2007-04-23 6:17 ` Eric W. Biederman
0 siblings, 0 replies; 60+ messages in thread
From: Eric W. Biederman @ 2007-04-23 6:17 UTC (permalink / raw)
To: vgoyal
Cc: fastboot, Kexec Mailing List, Jurriaan, linux-kernel,
Magnus Damm, Helge Hafting, Horms, Andrew Morton, Andi Kleen
Vivek Goyal <vgoyal@in.ibm.com> writes:
> On Sun, Apr 22, 2007 at 11:15:48PM -0600, Eric W. Biederman wrote:
>> +++ b/arch/x86_64/Kconfig
>> @@ -565,62 +565,9 @@ config CRASH_DUMP
>> which are loaded in the main kernel with kexec-tools into
>> a specially reserved region and then later executed after
>> a crash by kdump/kexec. The crash dump kernel must be compiled
>> - to a memory address not used by the main kernel or BIOS using
>> - PHYSICAL_START.
>> + to a memory address not used by the main kernel or BIOS
>> For more details see Documentation/kdump/kdump.txt
>
> Hi Eric,
>
> I think "must be compiled" should be replaced with "must be loaded" now.
Yes, that sounds right. Ugh. I didn't look at enough context to read
the whole sentence. I just killed the part about PHYSICAL_START.
> Otherwise both the patches look fine. I am planning to test these.
>
> This change will also require modifications to Documentation/kdump/kdump.txt
> file.
Do you think you can generate the patch fix up the CONFIG_CRASH_DUMP
and kdump.txt documentation.
I was just interested enough to spend the 15 minutes needed to generate
this patch. I don't think I care enough to dot the i's and cross the t's
in the documentation.
Eric
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH 2/2] x86_64: Remove CONFIG_PHYSICAL_START and CONFIG_RELOCATABLE
2007-04-23 6:17 ` Eric W. Biederman
@ 2007-04-23 6:25 ` Vivek Goyal
-1 siblings, 0 replies; 60+ messages in thread
From: Vivek Goyal @ 2007-04-23 6:25 UTC (permalink / raw)
To: Eric W. Biederman
Cc: Andrew Morton, Andi Kleen, Jurriaan, Helge Hafting, linux-kernel,
Magnus Damm, Horms, fastboot, Kexec Mailing List
On Mon, Apr 23, 2007 at 12:17:22AM -0600, Eric W. Biederman wrote:
> Vivek Goyal <vgoyal@in.ibm.com> writes:
>
> > On Sun, Apr 22, 2007 at 11:15:48PM -0600, Eric W. Biederman wrote:
> >> +++ b/arch/x86_64/Kconfig
> >> @@ -565,62 +565,9 @@ config CRASH_DUMP
> >> which are loaded in the main kernel with kexec-tools into
> >> a specially reserved region and then later executed after
> >> a crash by kdump/kexec. The crash dump kernel must be compiled
> >> - to a memory address not used by the main kernel or BIOS using
> >> - PHYSICAL_START.
> >> + to a memory address not used by the main kernel or BIOS
> >> For more details see Documentation/kdump/kdump.txt
> >
> > Hi Eric,
> >
> > I think "must be compiled" should be replaced with "must be loaded" now.
>
> Yes, that sounds right. Ugh. I didn't look at enough context to read
> the whole sentence. I just killed the part about PHYSICAL_START.
>
> > Otherwise both the patches look fine. I am planning to test these.
> >
> > This change will also require modifications to Documentation/kdump/kdump.txt
> > file.
>
> Do you think you can generate the patch fix up the CONFIG_CRASH_DUMP
> and kdump.txt documentation.
>
Ok. I will send one.
Thanks
Vivek
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH 2/2] x86_64: Remove CONFIG_PHYSICAL_START and CONFIG_RELOCATABLE
@ 2007-04-23 6:25 ` Vivek Goyal
0 siblings, 0 replies; 60+ messages in thread
From: Vivek Goyal @ 2007-04-23 6:25 UTC (permalink / raw)
To: Eric W. Biederman
Cc: fastboot, Kexec Mailing List, Jurriaan, linux-kernel,
Magnus Damm, Helge Hafting, Horms, Andrew Morton, Andi Kleen
On Mon, Apr 23, 2007 at 12:17:22AM -0600, Eric W. Biederman wrote:
> Vivek Goyal <vgoyal@in.ibm.com> writes:
>
> > On Sun, Apr 22, 2007 at 11:15:48PM -0600, Eric W. Biederman wrote:
> >> +++ b/arch/x86_64/Kconfig
> >> @@ -565,62 +565,9 @@ config CRASH_DUMP
> >> which are loaded in the main kernel with kexec-tools into
> >> a specially reserved region and then later executed after
> >> a crash by kdump/kexec. The crash dump kernel must be compiled
> >> - to a memory address not used by the main kernel or BIOS using
> >> - PHYSICAL_START.
> >> + to a memory address not used by the main kernel or BIOS
> >> For more details see Documentation/kdump/kdump.txt
> >
> > Hi Eric,
> >
> > I think "must be compiled" should be replaced with "must be loaded" now.
>
> Yes, that sounds right. Ugh. I didn't look at enough context to read
> the whole sentence. I just killed the part about PHYSICAL_START.
>
> > Otherwise both the patches look fine. I am planning to test these.
> >
> > This change will also require modifications to Documentation/kdump/kdump.txt
> > file.
>
> Do you think you can generate the patch fix up the CONFIG_CRASH_DUMP
> and kdump.txt documentation.
>
Ok. I will send one.
Thanks
Vivek
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH 1/2] x86_64: Reflect the relocatability of the kernel in the ELF header.
2007-04-23 5:12 ` Eric W. Biederman
@ 2007-04-24 6:31 ` Vivek Goyal
-1 siblings, 0 replies; 60+ messages in thread
From: Vivek Goyal @ 2007-04-24 6:31 UTC (permalink / raw)
To: Eric W. Biederman
Cc: Andrew Morton, Andi Kleen, Jurriaan, Helge Hafting, linux-kernel,
Horms, Kexec Mailing List
On Sun, Apr 22, 2007 at 11:12:13PM -0600, Eric W. Biederman wrote:
>
> Currently because vmlinux does not reflect that the kernel is relocatable
> we still have to support CONFIG_PHYSICAL_START. So this patch adds a small
> c program to do what we cannot do with a linker script, set the elf header
> type to ET_DYN.
>
> This should remove the last obstacle to removing CONFIG_PHYSICAL_START
> on x86_64.
>
> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
[Dropping fastboot mailing list from CC as kexec mailing list is new list
for this discussion]
[..]
> +void file_open(const char *name)
> +{
> + if ((fd = open(name, O_RDWR, 0)) < 0)
> + die("Unable to open `%s': %m", name);
> +}
> +
> +static void mketrel(void)
> +{
> + unsigned char e_type[2];
> + if (read(fd, &e_ident, sizeof(e_ident)) != sizeof(e_ident))
> + die("Cannot read ELF header: %s\n", strerror(errno));
> +
> + if (memcmp(e_ident, ELFMAG, 4) != 0)
> + die("No ELF magic\n");
> +
> + if ((e_ident[EI_CLASS] != ELFCLASS64) &&
> + (e_ident[EI_CLASS] != ELFCLASS32))
> + die("Unrecognized ELF class: %x\n", e_ident[EI_CLASS]);
> +
> + if ((e_ident[EI_DATA] != ELFDATA2LSB) &&
> + (e_ident[EI_DATA] != ELFDATA2MSB))
> + die("Unrecognized ELF data encoding: %x\n", e_ident[EI_DATA]);
> +
> + if (e_ident[EI_VERSION] != EV_CURRENT)
> + die("Unknown ELF version: %d\n", e_ident[EI_VERSION]);
> +
> + if (e_ident[EI_DATA] == ELFDATA2LSB) {
> + e_type[0] = ET_REL & 0xff;
> + e_type[1] = ET_REL >> 8;
> + } else {
> + e_type[1] = ET_REL & 0xff;
> + e_type[0] = ET_REL >> 8;
> + }
Hi Eric,
Should this be ET_REL or ET_DYN? kexec refuses to load this vmlinux
as it does not find it to be executable type.
I am not well versed with various conventions but if I go through "Executable
and Linking Format" document, this is what it says about various file types.
• A relocatable file holds code and data suitable for linking with other
object files to create an executable or a shared object file.
• An executable file holds a program suitable for execution.
• A shared object file holds code and data suitable for linking in two
contexts. First, the link editor may process it with other relocatable and
shared object files to create another object file. Second, the dynamic
linker combines it with an executable file and other shared objects
to create a process image.
So above does not seem to fit in the ET_REL type. We can't relink this
vmlinux? And it does not seem to fit in ET_DYN definition too. We are
not relinking this vmlinux with another executable or other relocatable
files.
I remember once you mentioned the term dynamic executable which can be
loaded at a non-compiled address and let run without requiring any
relocation processing. This vmlinux will fall in that category but can't
relate it to standard elf file definitions.
Thanks
Vivek
^ permalink raw reply [flat|nested] 60+ messages in thread* Re: [PATCH 1/2] x86_64: Reflect the relocatability of the kernel in the ELF header.
@ 2007-04-24 6:31 ` Vivek Goyal
0 siblings, 0 replies; 60+ messages in thread
From: Vivek Goyal @ 2007-04-24 6:31 UTC (permalink / raw)
To: Eric W. Biederman
Cc: Kexec Mailing List, Jurriaan, linux-kernel, Andi Kleen,
Helge Hafting, Horms, Andrew Morton
On Sun, Apr 22, 2007 at 11:12:13PM -0600, Eric W. Biederman wrote:
>
> Currently because vmlinux does not reflect that the kernel is relocatable
> we still have to support CONFIG_PHYSICAL_START. So this patch adds a small
> c program to do what we cannot do with a linker script, set the elf header
> type to ET_DYN.
>
> This should remove the last obstacle to removing CONFIG_PHYSICAL_START
> on x86_64.
>
> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
[Dropping fastboot mailing list from CC as kexec mailing list is new list
for this discussion]
[..]
> +void file_open(const char *name)
> +{
> + if ((fd = open(name, O_RDWR, 0)) < 0)
> + die("Unable to open `%s': %m", name);
> +}
> +
> +static void mketrel(void)
> +{
> + unsigned char e_type[2];
> + if (read(fd, &e_ident, sizeof(e_ident)) != sizeof(e_ident))
> + die("Cannot read ELF header: %s\n", strerror(errno));
> +
> + if (memcmp(e_ident, ELFMAG, 4) != 0)
> + die("No ELF magic\n");
> +
> + if ((e_ident[EI_CLASS] != ELFCLASS64) &&
> + (e_ident[EI_CLASS] != ELFCLASS32))
> + die("Unrecognized ELF class: %x\n", e_ident[EI_CLASS]);
> +
> + if ((e_ident[EI_DATA] != ELFDATA2LSB) &&
> + (e_ident[EI_DATA] != ELFDATA2MSB))
> + die("Unrecognized ELF data encoding: %x\n", e_ident[EI_DATA]);
> +
> + if (e_ident[EI_VERSION] != EV_CURRENT)
> + die("Unknown ELF version: %d\n", e_ident[EI_VERSION]);
> +
> + if (e_ident[EI_DATA] == ELFDATA2LSB) {
> + e_type[0] = ET_REL & 0xff;
> + e_type[1] = ET_REL >> 8;
> + } else {
> + e_type[1] = ET_REL & 0xff;
> + e_type[0] = ET_REL >> 8;
> + }
Hi Eric,
Should this be ET_REL or ET_DYN? kexec refuses to load this vmlinux
as it does not find it to be executable type.
I am not well versed with various conventions but if I go through "Executable
and Linking Format" document, this is what it says about various file types.
• A relocatable file holds code and data suitable for linking with other
object files to create an executable or a shared object file.
• An executable file holds a program suitable for execution.
• A shared object file holds code and data suitable for linking in two
contexts. First, the link editor may process it with other relocatable and
shared object files to create another object file. Second, the dynamic
linker combines it with an executable file and other shared objects
to create a process image.
So above does not seem to fit in the ET_REL type. We can't relink this
vmlinux? And it does not seem to fit in ET_DYN definition too. We are
not relinking this vmlinux with another executable or other relocatable
files.
I remember once you mentioned the term dynamic executable which can be
loaded at a non-compiled address and let run without requiring any
relocation processing. This vmlinux will fall in that category but can't
relate it to standard elf file definitions.
Thanks
Vivek
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 60+ messages in thread* Re: [PATCH 1/2] x86_64: Reflect the relocatability of the kernel in the ELF header.
2007-04-24 6:31 ` Vivek Goyal
@ 2007-04-24 7:21 ` Eric W. Biederman
-1 siblings, 0 replies; 60+ messages in thread
From: Eric W. Biederman @ 2007-04-24 7:21 UTC (permalink / raw)
To: vgoyal
Cc: Andrew Morton, Andi Kleen, Jurriaan, Helge Hafting, linux-kernel,
Horms, Kexec Mailing List
Vivek Goyal <vgoyal@in.ibm.com> writes:
> On Sun, Apr 22, 2007 at 11:12:13PM -0600, Eric W. Biederman wrote:
>>
>> Currently because vmlinux does not reflect that the kernel is relocatable
>> we still have to support CONFIG_PHYSICAL_START. So this patch adds a small
>> c program to do what we cannot do with a linker script, set the elf header
>> type to ET_DYN.
>>
>> This should remove the last obstacle to removing CONFIG_PHYSICAL_START
>> on x86_64.
>>
>> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
>
> [Dropping fastboot mailing list from CC as kexec mailing list is new list
> for this discussion]
>
> [..]
>> +void file_open(const char *name)
>> +{
>> + if ((fd = open(name, O_RDWR, 0)) < 0)
>> + die("Unable to open `%s': %m", name);
>> +}
>> +
>> +static void mketrel(void)
>> +{
>> + unsigned char e_type[2];
>> + if (read(fd, &e_ident, sizeof(e_ident)) != sizeof(e_ident))
>> + die("Cannot read ELF header: %s\n", strerror(errno));
>> +
>> + if (memcmp(e_ident, ELFMAG, 4) != 0)
>> + die("No ELF magic\n");
>> +
>> + if ((e_ident[EI_CLASS] != ELFCLASS64) &&
>> + (e_ident[EI_CLASS] != ELFCLASS32))
>> + die("Unrecognized ELF class: %x\n", e_ident[EI_CLASS]);
>> +
>> + if ((e_ident[EI_DATA] != ELFDATA2LSB) &&
>> + (e_ident[EI_DATA] != ELFDATA2MSB))
>> + die("Unrecognized ELF data encoding: %x\n", e_ident[EI_DATA]);
>> +
>> + if (e_ident[EI_VERSION] != EV_CURRENT)
>> + die("Unknown ELF version: %d\n", e_ident[EI_VERSION]);
>> +
>> + if (e_ident[EI_DATA] == ELFDATA2LSB) {
>> + e_type[0] = ET_REL & 0xff;
>> + e_type[1] = ET_REL >> 8;
>> + } else {
>> + e_type[1] = ET_REL & 0xff;
>> + e_type[0] = ET_REL >> 8;
>> + }
>
> Hi Eric,
>
> Should this be ET_REL or ET_DYN? kexec refuses to load this vmlinux
> as it does not find it to be executable type.
Doh. It should be ET_DYN. I had relocatable much to much on the brain,
and so I stuffed in the wrong type.
> I am not well versed with various conventions but if I go through "Executable
> and Linking Format" document, this is what it says about various file types.
>
> • A relocatable file holds code and data suitable for linking with other
> object files to create an executable or a shared object file.
>
> • An executable file holds a program suitable for execution.
>
> • A shared object file holds code and data suitable for linking in two
> contexts. First, the link editor may process it with other relocatable and
> shared object files to create another object file. Second, the dynamic
> linker combines it with an executable file and other shared objects
> to create a process image.
>
> So above does not seem to fit in the ET_REL type. We can't relink this
> vmlinux? And it does not seem to fit in ET_DYN definition too. We are
> not relinking this vmlinux with another executable or other relocatable
> files.
>
> I remember once you mentioned the term dynamic executable which can be
> loaded at a non-compiled address and let run without requiring any
> relocation processing. This vmlinux will fall in that category but can't
> relate it to standard elf file definitions.
Sorry about that.
ET_DYN without a PT_DYNAMIC segment, without a PT_INTERP segment,
and with a valid entry point is exactly that. Loaders never perform
relocation processing on a ET_DYN executable but they are allowed to
shift all of the addresses by a single delta so long as all of the
alignment restrictions are honored.
Relocation processing when it happens comes from the dynamic linker,
which is set in PT_INTERP and the dynamic linker looks a PT_DYNAMIC
to figure out what relocations are available for processing.
The basic issue is that ld don't really comprehend what we are doing
since we are building a position independent executable in a way
that the normal tools don't allow, so we have to poke the header.
If we had compiled with -fPIC we could have specified -pie or
--pic-executable to ld and it would have done the right thing.
But as it is our executable only changes physical addresses and
not virtual addresses something completely foreign to ld.
Eric
^ permalink raw reply [flat|nested] 60+ messages in thread* Re: [PATCH 1/2] x86_64: Reflect the relocatability of the kernel in the ELF header.
@ 2007-04-24 7:21 ` Eric W. Biederman
0 siblings, 0 replies; 60+ messages in thread
From: Eric W. Biederman @ 2007-04-24 7:21 UTC (permalink / raw)
To: vgoyal
Cc: Kexec Mailing List, Jurriaan, linux-kernel, Andi Kleen,
Helge Hafting, Horms, Andrew Morton
[-- Attachment #1: Type: text/plain, Size: 4202 bytes --]
Vivek Goyal <vgoyal@in.ibm.com> writes:
> On Sun, Apr 22, 2007 at 11:12:13PM -0600, Eric W. Biederman wrote:
>>
>> Currently because vmlinux does not reflect that the kernel is relocatable
>> we still have to support CONFIG_PHYSICAL_START. So this patch adds a small
>> c program to do what we cannot do with a linker script, set the elf header
>> type to ET_DYN.
>>
>> This should remove the last obstacle to removing CONFIG_PHYSICAL_START
>> on x86_64.
>>
>> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
>
> [Dropping fastboot mailing list from CC as kexec mailing list is new list
> for this discussion]
>
> [..]
>> +void file_open(const char *name)
>> +{
>> + if ((fd = open(name, O_RDWR, 0)) < 0)
>> + die("Unable to open `%s': %m", name);
>> +}
>> +
>> +static void mketrel(void)
>> +{
>> + unsigned char e_type[2];
>> + if (read(fd, &e_ident, sizeof(e_ident)) != sizeof(e_ident))
>> + die("Cannot read ELF header: %s\n", strerror(errno));
>> +
>> + if (memcmp(e_ident, ELFMAG, 4) != 0)
>> + die("No ELF magic\n");
>> +
>> + if ((e_ident[EI_CLASS] != ELFCLASS64) &&
>> + (e_ident[EI_CLASS] != ELFCLASS32))
>> + die("Unrecognized ELF class: %x\n", e_ident[EI_CLASS]);
>> +
>> + if ((e_ident[EI_DATA] != ELFDATA2LSB) &&
>> + (e_ident[EI_DATA] != ELFDATA2MSB))
>> + die("Unrecognized ELF data encoding: %x\n", e_ident[EI_DATA]);
>> +
>> + if (e_ident[EI_VERSION] != EV_CURRENT)
>> + die("Unknown ELF version: %d\n", e_ident[EI_VERSION]);
>> +
>> + if (e_ident[EI_DATA] == ELFDATA2LSB) {
>> + e_type[0] = ET_REL & 0xff;
>> + e_type[1] = ET_REL >> 8;
>> + } else {
>> + e_type[1] = ET_REL & 0xff;
>> + e_type[0] = ET_REL >> 8;
>> + }
>
> Hi Eric,
>
> Should this be ET_REL or ET_DYN? kexec refuses to load this vmlinux
> as it does not find it to be executable type.
Doh. It should be ET_DYN. I had relocatable much to much on the brain,
and so I stuffed in the wrong type.
> I am not well versed with various conventions but if I go through "Executable
> and Linking Format" document, this is what it says about various file types.
>
> • A relocatable file holds code and data suitable for linking with other
> object files to create an executable or a shared object file.
>
> • An executable file holds a program suitable for execution.
>
> • A shared object file holds code and data suitable for linking in two
> contexts. First, the link editor may process it with other relocatable and
> shared object files to create another object file. Second, the dynamic
> linker combines it with an executable file and other shared objects
> to create a process image.
>
> So above does not seem to fit in the ET_REL type. We can't relink this
> vmlinux? And it does not seem to fit in ET_DYN definition too. We are
> not relinking this vmlinux with another executable or other relocatable
> files.
>
> I remember once you mentioned the term dynamic executable which can be
> loaded at a non-compiled address and let run without requiring any
> relocation processing. This vmlinux will fall in that category but can't
> relate it to standard elf file definitions.
Sorry about that.
ET_DYN without a PT_DYNAMIC segment, without a PT_INTERP segment,
and with a valid entry point is exactly that. Loaders never perform
relocation processing on a ET_DYN executable but they are allowed to
shift all of the addresses by a single delta so long as all of the
alignment restrictions are honored.
Relocation processing when it happens comes from the dynamic linker,
which is set in PT_INTERP and the dynamic linker looks a PT_DYNAMIC
to figure out what relocations are available for processing.
The basic issue is that ld don't really comprehend what we are doing
since we are building a position independent executable in a way
that the normal tools don't allow, so we have to poke the header.
If we had compiled with -fPIC we could have specified -pie or
--pic-executable to ld and it would have done the right thing.
But as it is our executable only changes physical addresses and
not virtual addresses something completely foreign to ld.
Eric
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-04-02 7:41 ` Vivek Goyal
2007-04-02 8:43 ` Eric W. Biederman
@ 2007-04-02 11:17 ` thunder7
2007-04-02 11:36 ` Vivek Goyal
1 sibling, 1 reply; 60+ messages in thread
From: thunder7 @ 2007-04-02 11:17 UTC (permalink / raw)
To: Vivek Goyal
Cc: Andrew Morton, Eric W. Biederman, Jurriaan, Helge Hafting, linux-kernel
From: Vivek Goyal <vgoyal@in.ibm.com>
Date: Mon, Apr 02, 2007 at 01:11:59PM +0530
>
> How about attached patch?
>
> o X86_64 kernel should run from 2MB aligned address for two reasons.
> - Performance.
> - For relocatable kernels, page tables are updated based on difference
> between compile time address and load time physical address.
> This difference should be multiple of 2MB as kernel text and data
> is mapped using 2MB pages and PMD should be pointing to a 2MB
> aligned address. Life is simpler if both compile time and load time
> kernel addresses are 2MB aligned.
>
> o Flag the error at compile time if one is trying to build a kernel which
> does not meet alignment restrictions.
>
> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
> ---
>
> arch/x86_64/kernel/head64.c | 8 ++++++++
> include/asm-x86_64/page.h | 1 +
> 2 files changed, 9 insertions(+)
>
> diff -puN arch/x86_64/kernel/head64.c~x86_64-check-for-config-physical-start-aligned-2M arch/x86_64/kernel/head64.c
> --- linux-2.6.21-rc5-mm3-vanilla/arch/x86_64/kernel/head64.c~x86_64-check-for-config-physical-start-aligned-2M 2007-04-02 20:46:43.000000000 +0530
> +++ linux-2.6.21-rc5-mm3-vanilla-root/arch/x86_64/kernel/head64.c 2007-04-02 21:20:45.000000000 +0530
> @@ -62,6 +62,14 @@ void __init x86_64_start_kernel(char * r
> {
> int i;
>
> + /*
> + * Make sure kernel is aligned to 2MB address. Catching it at compile
> + * time is better. Change your config file and compile the kernel
> + * for a 2MB aligned address (CONFIG_PHYSICAL_START)
> + */
> + BUILD_BUG_ON(ALIGN(CONFIG_PHYSICAL_START, __KERNEL_ALIGN)
> + != CONFIG_PHYSICAL_START);
> +
> /* clear bss before set_intr_gate with early_idt_handler */
> clear_bss();
>
> diff -puN include/asm-x86_64/page.h~x86_64-check-for-config-physical-start-aligned-2M include/asm-x86_64/page.h
> --- linux-2.6.21-rc5-mm3-vanilla/include/asm-x86_64/page.h~x86_64-check-for-config-physical-start-aligned-2M 2007-04-02 20:50:55.000000000 +0530
> +++ linux-2.6.21-rc5-mm3-vanilla-root/include/asm-x86_64/page.h 2007-04-02 20:51:34.000000000 +0530
> @@ -79,6 +79,7 @@ extern unsigned long phys_base;
> #endif /* !__ASSEMBLY__ */
>
> #define __PHYSICAL_START CONFIG_PHYSICAL_START
> +#define __KERNEL_ALIGN 0x200000
> #define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
> #define __START_KERNEL_map 0xffffffff80000000
> #define __PAGE_OFFSET 0xffff810000000000
> _
I'm only a user, so I'm not uptodate on these addresses and how they
work. However, how does this solve the problem that running
make oldconfig
on a working 2.6.21-rc3-mm2 .config gives an unbootable 2.6.21-rc5-mm3
kernel? If I read things correctly, you now get a BUG, but the kernel
still won't boot. If that is correct, than I, as a user, don't think
that this is the solution that I feel comfortable with.
If the kernel only boots CONFIG_PHYSICAL_START is aligned on a 2MB
address, then we should align it, not BUG out when it's not, and
especially not when it's unaligned through no fault of the user.
Kind regards,
Jurriaan
--
Debian (Unstable) GNU/Linux 2.6.21-rc5-mm3 2x2010 bogomips load 0.89
the Jack Vance Integral Edition: http://www.integralarchive.org
^ permalink raw reply [flat|nested] 60+ messages in thread* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-04-02 11:17 ` 2.6.21-rc5-mm3 - no boot, "address not 2M aligned" thunder7
@ 2007-04-02 11:36 ` Vivek Goyal
2007-04-02 14:49 ` thunder7
0 siblings, 1 reply; 60+ messages in thread
From: Vivek Goyal @ 2007-04-02 11:36 UTC (permalink / raw)
To: thunder7; +Cc: Andrew Morton, Eric W. Biederman, Helge Hafting, linux-kernel
On Mon, Apr 02, 2007 at 01:17:45PM +0200, thunder7@xs4all.nl wrote:
[..]
> > + /*
> > + * Make sure kernel is aligned to 2MB address. Catching it at compile
> > + * time is better. Change your config file and compile the kernel
> > + * for a 2MB aligned address (CONFIG_PHYSICAL_START)
> > + */
> > + BUILD_BUG_ON(ALIGN(CONFIG_PHYSICAL_START, __KERNEL_ALIGN)
> > + != CONFIG_PHYSICAL_START);
> > +
> > /* clear bss before set_intr_gate with early_idt_handler */
> > clear_bss();
> >
> > diff -puN include/asm-x86_64/page.h~x86_64-check-for-config-physical-start-aligned-2M include/asm-x86_64/page.h
> > --- linux-2.6.21-rc5-mm3-vanilla/include/asm-x86_64/page.h~x86_64-check-for-config-physical-start-aligned-2M 2007-04-02 20:50:55.000000000 +0530
> > +++ linux-2.6.21-rc5-mm3-vanilla-root/include/asm-x86_64/page.h 2007-04-02 20:51:34.000000000 +0530
> > @@ -79,6 +79,7 @@ extern unsigned long phys_base;
> > #endif /* !__ASSEMBLY__ */
> >
> > #define __PHYSICAL_START CONFIG_PHYSICAL_START
> > +#define __KERNEL_ALIGN 0x200000
> > #define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
> > #define __START_KERNEL_map 0xffffffff80000000
> > #define __PAGE_OFFSET 0xffff810000000000
> > _
>
> I'm only a user, so I'm not uptodate on these addresses and how they
> work. However, how does this solve the problem that running
>
> make oldconfig
>
> on a working 2.6.21-rc3-mm2 .config gives an unbootable 2.6.21-rc5-mm3
> kernel? If I read things correctly, you now get a BUG, but the kernel
> still won't boot. If that is correct, than I, as a user, don't think
> that this is the solution that I feel comfortable with.
>
You will get a compile time error and your compilation will not be
through if your physical address is not 2MB aligned. Just give it a try.
Thanks
Vivek
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-04-02 11:36 ` Vivek Goyal
@ 2007-04-02 14:49 ` thunder7
2007-04-02 14:59 ` thunder7
0 siblings, 1 reply; 60+ messages in thread
From: thunder7 @ 2007-04-02 14:49 UTC (permalink / raw)
To: Vivek Goyal
Cc: thunder7, Andrew Morton, Eric W. Biederman, Helge Hafting, linux-kernel
From: Vivek Goyal <vgoyal@in.ibm.com>
Date: Mon, Apr 02, 2007 at 05:06:39PM +0530
> On Mon, Apr 02, 2007 at 01:17:45PM +0200, thunder7@xs4all.nl wrote:
> [..]
> > > + /*
> > > + * Make sure kernel is aligned to 2MB address. Catching it at compile
> > > + * time is better. Change your config file and compile the kernel
> > > + * for a 2MB aligned address (CONFIG_PHYSICAL_START)
> > > + */
> > > + BUILD_BUG_ON(ALIGN(CONFIG_PHYSICAL_START, __KERNEL_ALIGN)
> > > + != CONFIG_PHYSICAL_START);
> > > +
> > > /* clear bss before set_intr_gate with early_idt_handler */
> > > clear_bss();
> > >
> > > diff -puN include/asm-x86_64/page.h~x86_64-check-for-config-physical-start-aligned-2M include/asm-x86_64/page.h
> > > --- linux-2.6.21-rc5-mm3-vanilla/include/asm-x86_64/page.h~x86_64-check-for-config-physical-start-aligned-2M 2007-04-02 20:50:55.000000000 +0530
> > > +++ linux-2.6.21-rc5-mm3-vanilla-root/include/asm-x86_64/page.h 2007-04-02 20:51:34.000000000 +0530
> > > @@ -79,6 +79,7 @@ extern unsigned long phys_base;
> > > #endif /* !__ASSEMBLY__ */
> > >
> > > #define __PHYSICAL_START CONFIG_PHYSICAL_START
> > > +#define __KERNEL_ALIGN 0x200000
> > > #define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
> > > #define __START_KERNEL_map 0xffffffff80000000
> > > #define __PAGE_OFFSET 0xffff810000000000
> > > _
> >
> You will get a compile time error and your compilation will not be
> through if your physical address is not 2MB aligned. Just give it a try.
>
Just gave it a try, but I'm not convinced yet :-)
I used a working 2.6.21-rc3-mm2 tree, patched it up to 2.6.21-rc5-mm3
and applied your patch. I ended up with the .config later in this email,
and got this error:
CC arch/x86_64/kernel/head64.o
arch/x86_64/kernel/head64.c: In function 'x86_64_start_kernel':
arch/x86_64/kernel/head64.c:70: error: size of array 'type name' is negative
make[1]: *** [arch/x86_64/kernel/head64.o] Error 1
make: *** [arch/x86_64/kernel] Error 2
After reverting your patch, the build didn't fail, but of course the
kernel won't build.
Good luck,
Jurriaan
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.21-rc5-mm3
# Mon Apr 2 16:38:50 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_PAGE_GROUP_BY_MOBILITY=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Process debugging support
#
CONFIG_UTRACE=y
CONFIG_PTRACE=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_ADAPTIVE_READAHEAD=y
CONFIG_NR_CPUS=2
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_REORDER=y
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_ACPI_CPUFREQ=m
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# CPU idle PM support
#
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_DOMAINS is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_IA32_EMULATION is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
CONFIG_NF_CONNTRACK_ENABLED=y
CONFIG_NF_CONNTRACK_SUPPORT=y
# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_FIFO=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=32
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_ACPI_IBM is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=12
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_HPTIOP=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
CONFIG_SATA_SIL24=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACPI=y
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_RAID5_RESHAPE=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=y
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=y
CONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=y
CONFIG_IEEE1394_RAWIO=y
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
# CONFIG_MAC_EMUMOUSEBTN is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
# CONFIG_ARCNET_CAP is not set
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
#
# PHY device support
#
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
CONFIG_FORCEDETH_NAPI=y
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_VIOC is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_RTL818X is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=m
# CONFIG_I6300ESB_WDT is not set
CONFIG_I8XX_TCO=m
# CONFIG_ITCO_WDT is not set
CONFIG_SC1200_WDT=m
# CONFIG_PC87413_WDT is not set
CONFIG_60XX_WDT=m
# CONFIG_SBC8360_WDT is not set
CONFIG_CPU5_WDT=m
# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
# CONFIG_W83697HF_WDT is not set
CONFIG_W83877F_WDT=m
# CONFIG_W83977F_WDT is not set
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_GEODE is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PASEMI is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=m
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_PROGEAR is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frambuffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
# CONFIG_FONT_8x16 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
CONFIG_FONT_10x18=y
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# SoC audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_GTCO is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_E752X is not set
CONFIG_EDAC_K8=y
CONFIG_EDAC_POLL=y
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1672=m
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
# CONFIG_RTC_DRV_PCF8583 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
#
# DMA Devices
#
#
# Auxiliary Display support
#
#
# Virtualization
#
# CONFIG_KVM is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Layered filesystems
#
# CONFIG_UNION_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
# CONFIG_MARKERS is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
# CONFIG_UNWIND_INFO is not set
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_INTEGRITY is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_CRC_ITU_T is not set
CONFIG_LIBCRC32C=y
# CONFIG_EEPROM_93CX6 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
--
"Your mother was a hamster, and your father smelt of elderberrys!"
Monty Python and the Holy Grail
Debian (Unstable) GNU/Linux 2.6.21-rc5-mm3 2x2010 bogomips load 1.37
the Jack Vance Integral Edition: http://www.integralarchive.org
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-04-02 14:49 ` thunder7
@ 2007-04-02 14:59 ` thunder7
2007-04-03 4:05 ` Vivek Goyal
0 siblings, 1 reply; 60+ messages in thread
From: thunder7 @ 2007-04-02 14:59 UTC (permalink / raw)
To: thunder7
Cc: Vivek Goyal, Andrew Morton, Eric W. Biederman, Helge Hafting,
linux-kernel
From: thunder7@xs4all.nl <thunder7@xs4all.nl>
Date: Mon, Apr 02, 2007 at 04:49:14PM +0200
>
> I used a working 2.6.21-rc3-mm2 tree, patched it up to 2.6.21-rc5-mm3
> and applied your patch. I ended up with the .config later in this email,
> and got this error:
>
> CC arch/x86_64/kernel/head64.o
> arch/x86_64/kernel/head64.c: In function 'x86_64_start_kernel':
> arch/x86_64/kernel/head64.c:70: error: size of array 'type name' is negative
> make[1]: *** [arch/x86_64/kernel/head64.o] Error 1
> make: *** [arch/x86_64/kernel] Error 2
>
> After reverting your patch, the build didn't fail, but of course the
> kernel won't build.
>
That should, of course, read 'kernel won't boot'.
Sorry,
Jurriaan
--
Debian (Unstable) GNU/Linux 2.6.21-rc5-mm3 2x4826 bogomips load 0.92
the Jack Vance Integral Edition: http://www.integralarchive.org
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3 - no boot, "address not 2M aligned"
2007-04-02 14:59 ` thunder7
@ 2007-04-03 4:05 ` Vivek Goyal
0 siblings, 0 replies; 60+ messages in thread
From: Vivek Goyal @ 2007-04-03 4:05 UTC (permalink / raw)
To: thunder7; +Cc: Andrew Morton, Eric W. Biederman, Helge Hafting, linux-kernel
On Mon, Apr 02, 2007 at 04:59:26PM +0200, thunder7@xs4all.nl wrote:
> From: thunder7@xs4all.nl <thunder7@xs4all.nl>
> Date: Mon, Apr 02, 2007 at 04:49:14PM +0200
> >
> > I used a working 2.6.21-rc3-mm2 tree, patched it up to 2.6.21-rc5-mm3
> > and applied your patch. I ended up with the .config later in this email,
> > and got this error:
> >
> > CC arch/x86_64/kernel/head64.o
> > arch/x86_64/kernel/head64.c: In function 'x86_64_start_kernel':
> > arch/x86_64/kernel/head64.c:70: error: size of array 'type name' is negative
> > make[1]: *** [arch/x86_64/kernel/head64.o] Error 1
> > make: *** [arch/x86_64/kernel] Error 2
> >
> > After reverting your patch, the build didn't fail, but of course the
> > kernel won't build.
> >
> That should, of course, read 'kernel won't boot'.
>
I agree that error message is not very clear. It is just an indication that
there is a problem on line 70 in head64.c. That's why I have put a
commet there so that anybody can make out that CONFIG_PHYSICAL_START
is not 2MB aligned hence the failure.
Unfortunately, Kconfig infrastrucutre does not allow to place alignment
restrictions on the values. Otherwise that would have been the best
solution.
So we still have detected the problem at compilation time in a little
indirect manner though.
Thanks
Vivek
^ permalink raw reply [flat|nested] 60+ messages in thread
* 2.6.21-rc5-mm3 - cpuidle, acpi, and C-states
2007-03-30 8:05 2.6.21-rc5-mm3 Andrew Morton
` (4 preceding siblings ...)
2007-03-31 7:12 ` 2.6.21-rc5-mm3 - no boot, "address not 2M aligned" Helge Hafting
@ 2007-03-31 8:05 ` Valdis.Kletnieks
2007-03-31 19:25 ` 2.6.21-rc5-mm3: Why was my vioc cleanup patch dropped? Adrian Bunk
` (5 subsequent siblings)
11 siblings, 0 replies; 60+ messages in thread
From: Valdis.Kletnieks @ 2007-03-31 8:05 UTC (permalink / raw)
To: Andrew Morton, Venkatesh Pallipadi, Len Brown; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1763 bytes --]
On Fri, 30 Mar 2007 01:05:59 PDT, Andrew Morton said:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm3/
Somebody is confused (possibly me). Running an x86_64 kernel, and I have:
% cat /proc/acpi/processor/CPU0/power
active state: C0
max_cstate: C8
bus master activity: 00000000
maximum allowed latency: 2000 usec
states:
C1: type[C1] promotion[--] demotion[--] latency[001] usage[00000003] duration[00000000000000000000]
C2: type[C2] promotion[--] demotion[--] latency[001] usage[00166266] duration[00000000000000000000]
C3: type[C3] promotion[--] demotion[--] latency[057] usage[02045938] duration[00000000000000000000]
Wow. Lots of zeros in that last column..
The 'duration' is output by this code in drivers/acpi/processor_idle.c that
thinks the value is an 'unsigned long long':
seq_printf(seq, "latency[%03d] usage[%08d] duration[%020llu]\n",
pr->power.states[i].latency,
pr->power.states[i].usage,
(unsigned long long)pr->power.states[i].time);
However, over in /sys, we have non-zero values for the usage/time:
% cat /sys/devices/system/cpu/cpu0/cpuidle/state?/time
0
110861364
-2091818383
That's because in drivers/cpuidle/sysfs.c, we have this code that thinks
a %d is suitable to output that number:
#define define_show_state_function(_name) static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) { \
return sprintf(buf, "%d\n", state->_name);\
}
...
define_one_state_ro(time, show_state_time);
But the negative number for state2/time indicates that *this* isn't right either....
[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]
^ permalink raw reply [flat|nested] 60+ messages in thread* 2.6.21-rc5-mm3: Why was my vioc cleanup patch dropped?
2007-03-30 8:05 2.6.21-rc5-mm3 Andrew Morton
` (5 preceding siblings ...)
2007-03-31 8:05 ` 2.6.21-rc5-mm3 - cpuidle, acpi, and C-states Valdis.Kletnieks
@ 2007-03-31 19:25 ` Adrian Bunk
2007-03-31 20:48 ` [-mm patch] make drivers/ata/pata_ali.c:ali_tf_load() static Adrian Bunk
` (4 subsequent siblings)
11 siblings, 0 replies; 60+ messages in thread
From: Adrian Bunk @ 2007-03-31 19:25 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, netdev, Sriram Chidambaram, jgarzik
On Fri, Mar 30, 2007 at 01:05:59AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.21-rc5-mm2:
>...
> -drivers-net-vioc-possible-cleanups.patch
>...
> Merged into mainline or a subsystem tree.
>...
Please give me a clue:
- This patch is not merged into the netdev tree as included in -mm and
- it still applies fine against 2.6.21-rc5-mm3 and
- it still compiles fine with 2.6.21-rc5-mm3.
TIA
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 60+ messages in thread* [-mm patch] make drivers/ata/pata_ali.c:ali_tf_load() static
2007-03-30 8:05 2.6.21-rc5-mm3 Andrew Morton
` (6 preceding siblings ...)
2007-03-31 19:25 ` 2.6.21-rc5-mm3: Why was my vioc cleanup patch dropped? Adrian Bunk
@ 2007-03-31 20:48 ` Adrian Bunk
2007-04-01 16:21 ` Tejun Heo
2007-03-31 20:55 ` [2.6 patch] remove the config option for the cs5530a_warm_reset() quirk Adrian Bunk
` (3 subsequent siblings)
11 siblings, 1 reply; 60+ messages in thread
From: Adrian Bunk @ 2007-03-31 20:48 UTC (permalink / raw)
To: Andrew Morton, Alan Cox, jgarzik; +Cc: linux-kernel, linux-ide
On Fri, Mar 30, 2007 at 01:05:59AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.21-rc5-mm2:
>...
> +testing-patch-for-ali-pata-fixes-hopefully-for-the-problems-with-atapi-dma.patch
>
> pata experiment
>...
This patch makes the needlesly global ali_tf_load() static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
--- linux-2.6.21-rc5-mm3/drivers/ata/pata_ali.c.old 2007-03-31 21:06:19.000000000 +0200
+++ linux-2.6.21-rc5-mm3/drivers/ata/pata_ali.c 2007-03-31 21:06:33.000000000 +0200
@@ -288,7 +288,7 @@
* Inherited from caller.
*/
-void ali_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+static void ali_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
^ permalink raw reply [flat|nested] 60+ messages in thread* [2.6 patch] remove the config option for the cs5530a_warm_reset() quirk
2007-03-30 8:05 2.6.21-rc5-mm3 Andrew Morton
` (7 preceding siblings ...)
2007-03-31 20:48 ` [-mm patch] make drivers/ata/pata_ali.c:ali_tf_load() static Adrian Bunk
@ 2007-03-31 20:55 ` Adrian Bunk
2007-03-31 21:05 ` Jeremy Fitzhardinge
2007-03-31 20:55 ` [-mm patch] make drivers/net/qla3xxx.c:PHY_DEVICES[] static Adrian Bunk
` (2 subsequent siblings)
11 siblings, 1 reply; 60+ messages in thread
From: Adrian Bunk @ 2007-03-31 20:55 UTC (permalink / raw)
To: Andrew Morton, ak; +Cc: linux-kernel, Jeremy Fitzhardinge
On Fri, Mar 30, 2007 at 01:05:59AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.21-rc5-mm2:
>...
> +x86_64-mm-clean-up-mach_reboot_fixups.patch
>...
> A few x86 updates
>...
OMG - I'll never understand how someone could initially start doing this
hiding of a small fixup behind a config option.
Instead of cleaning up this mess, please replace this patch with the
patch below.
cu
Adrian
<-- snip -->
A config option for hiding one small hardware specific fixup is overkill.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
arch/i386/Kconfig | 18 ----------
arch/i386/kernel/Makefile | 1
arch/i386/kernel/reboot.c | 43 +++++++++++++++++++++++-
arch/i386/kernel/reboot_fixups.c | 55 -------------------------------
include/linux/reboot_fixups.h | 10 -----
5 files changed, 42 insertions(+), 85 deletions(-)
--- linux-2.6.21-rc5-mm3/arch/i386/Kconfig.old 2007-03-31 20:50:28.000000000 +0200
+++ linux-2.6.21-rc5-mm3/arch/i386/Kconfig 2007-03-31 20:50:43.000000000 +0200
@@ -426,24 +426,6 @@
Say Y if you intend to run this kernel on a Dell Inspiron 8000.
Say N otherwise.
-config X86_REBOOTFIXUPS
- bool "Enable X86 board specific fixups for reboot"
- depends on X86
- default n
- ---help---
- This enables chipset and/or board specific fixups to be done
- in order to get reboot to work correctly. This is only needed on
- some combinations of hardware and BIOS. The symptom, for which
- this config is intended, is when reboot ends with a stalled/hung
- system.
-
- Currently, the only fixup is for the Geode GX1/CS5530A/TROM2.1.
- combination.
-
- Say Y if you want to enable the fixup. Currently, it's safe to
- enable this option even if you don't need it.
- Say N otherwise.
-
config MICROCODE
tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support"
select FW_LOADER
--- linux-2.6.21-rc5-mm3/arch/i386/kernel/Makefile.old 2007-03-31 20:51:03.000000000 +0200
+++ linux-2.6.21-rc5-mm3/arch/i386/kernel/Makefile 2007-03-31 20:51:28.000000000 +0200
@@ -23,7 +23,6 @@
obj-$(CONFIG_X86_MPPARSE) += mpparse.o
obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o
obj-$(CONFIG_X86_IO_APIC) += io_apic.o
-obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_X86_NUMAQ) += numaq.o
--- linux-2.6.21-rc5-mm3/arch/i386/kernel/reboot.c.old 2007-03-31 20:52:12.000000000 +0200
+++ linux-2.6.21-rc5-mm3/arch/i386/kernel/reboot.c 2007-03-31 21:20:18.000000000 +0200
@@ -13,11 +13,11 @@
#include <linux/ctype.h>
#include <linux/pm.h>
#include <linux/reboot.h>
+#include <linux/pci.h>
#include <asm/uaccess.h>
#include <asm/apic.h>
#include <asm/desc.h>
#include "mach_reboot.h"
-#include <linux/reboot_fixups.h>
/*
* Power off function, if any
@@ -314,6 +314,47 @@
#endif
}
+static void cs5530a_warm_reset(struct pci_dev *dev)
+{
+ /* writing 1 to the reset control register, 0x44 causes the
+ cs5530a to perform a system warm reset */
+ pci_write_config_byte(dev, 0x44, 0x1);
+ udelay(50); /* shouldn't get here but be safe and spin-a-while */
+ return;
+}
+
+struct device_fixup {
+ unsigned int vendor;
+ unsigned int device;
+ void (*reboot_fixup)(struct pci_dev *);
+};
+
+static struct device_fixup fixups_table[] = {
+{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
+};
+
+/*
+ * we see if any fixup is available for our current hardware. if there
+ * is a fixup, we call it and we expect to never return from it. if we
+ * do return, we keep looking and then eventually fall back to the
+ * standard mach_reboot on return.
+ */
+static void mach_reboot_fixups(void)
+{
+ struct device_fixup *cur;
+ struct pci_dev *dev;
+ int i;
+
+ for (i=0; i < ARRAY_SIZE(fixups_table); i++) {
+ cur = &(fixups_table[i]);
+ dev = pci_get_device(cur->vendor, cur->device, NULL);
+ if (!dev)
+ continue;
+
+ cur->reboot_fixup(dev);
+ }
+}
+
void machine_emergency_restart(void)
{
if (!reboot_thru_bios) {
--- linux-2.6.21-rc5-mm3/include/linux/reboot_fixups.h 2007-03-31 20:45:40.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,10 +0,0 @@
-#ifndef _LINUX_REBOOT_FIXUPS_H
-#define _LINUX_REBOOT_FIXUPS_H
-
-#ifdef CONFIG_X86_REBOOTFIXUPS
-extern void mach_reboot_fixups(void);
-#else
-#define mach_reboot_fixups() ((void)(0))
-#endif
-
-#endif /* _LINUX_REBOOT_FIXUPS_H */
--- linux-2.6.21-rc5-mm3/arch/i386/kernel/reboot_fixups.c 2007-03-31 20:45:40.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,55 +0,0 @@
-/*
- * linux/arch/i386/kernel/reboot_fixups.c
- *
- * This is a good place to put board specific reboot fixups.
- *
- * List of supported fixups:
- * geode-gx1/cs5530a - Jaya Kumar <jayalk@intworks.biz>
- *
- */
-
-#include <asm/delay.h>
-#include <linux/pci.h>
-#include <linux/reboot_fixups.h>
-
-static void cs5530a_warm_reset(struct pci_dev *dev)
-{
- /* writing 1 to the reset control register, 0x44 causes the
- cs5530a to perform a system warm reset */
- pci_write_config_byte(dev, 0x44, 0x1);
- udelay(50); /* shouldn't get here but be safe and spin-a-while */
- return;
-}
-
-struct device_fixup {
- unsigned int vendor;
- unsigned int device;
- void (*reboot_fixup)(struct pci_dev *);
-};
-
-static struct device_fixup fixups_table[] = {
-{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
-};
-
-/*
- * we see if any fixup is available for our current hardware. if there
- * is a fixup, we call it and we expect to never return from it. if we
- * do return, we keep looking and then eventually fall back to the
- * standard mach_reboot on return.
- */
-void mach_reboot_fixups(void)
-{
- struct device_fixup *cur;
- struct pci_dev *dev;
- int i;
-
- for (i=0; i < ARRAY_SIZE(fixups_table); i++) {
- cur = &(fixups_table[i]);
- dev = pci_get_device(cur->vendor, cur->device, NULL);
- if (!dev)
- continue;
-
- cur->reboot_fixup(dev);
- }
-}
-
^ permalink raw reply [flat|nested] 60+ messages in thread* Re: [2.6 patch] remove the config option for the cs5530a_warm_reset() quirk
2007-03-31 20:55 ` [2.6 patch] remove the config option for the cs5530a_warm_reset() quirk Adrian Bunk
@ 2007-03-31 21:05 ` Jeremy Fitzhardinge
2007-03-31 21:11 ` Adrian Bunk
0 siblings, 1 reply; 60+ messages in thread
From: Jeremy Fitzhardinge @ 2007-03-31 21:05 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, ak, linux-kernel, Jeremy Fitzhardinge
Adrian Bunk wrote:
> Instead of cleaning up this mess, please replace this patch with the
> patch below.
>
Yeah, I considered that patch as a placeholder; I'd been wondering if it
can be completely removed.
But this patch looks fine, though I'd go further - the lookup table of
pci ids is overkill since it only has one entry (and doesn't look likely
to grow any more).
J
^ permalink raw reply [flat|nested] 60+ messages in thread* Re: [2.6 patch] remove the config option for the cs5530a_warm_reset() quirk
2007-03-31 21:05 ` Jeremy Fitzhardinge
@ 2007-03-31 21:11 ` Adrian Bunk
2007-03-31 21:17 ` Jeremy Fitzhardinge
0 siblings, 1 reply; 60+ messages in thread
From: Adrian Bunk @ 2007-03-31 21:11 UTC (permalink / raw)
To: Jeremy Fitzhardinge; +Cc: Andrew Morton, ak, linux-kernel
On Sat, Mar 31, 2007 at 02:05:23PM -0700, Jeremy Fitzhardinge wrote:
> Adrian Bunk wrote:
> > Instead of cleaning up this mess, please replace this patch with the
> > patch below.
> >
>
> Yeah, I considered that patch as a placeholder; I'd been wondering if it
> can be completely removed.
>
> But this patch looks fine, though I'd go further - the lookup table of
> pci ids is overkill since it only has one entry (and doesn't look likely
> to grow any more).
I have no strong opinion regarding this - if it's agreed upon that it's
unlikely it will ever grow, I can also send an additional patch
simplifying it.
> J
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 60+ messages in thread* Re: [2.6 patch] remove the config option for the cs5530a_warm_reset() quirk
2007-03-31 21:11 ` Adrian Bunk
@ 2007-03-31 21:17 ` Jeremy Fitzhardinge
0 siblings, 0 replies; 60+ messages in thread
From: Jeremy Fitzhardinge @ 2007-03-31 21:17 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, ak, linux-kernel
Adrian Bunk wrote:
> I have no strong opinion regarding this - if it's agreed upon that it's
> unlikely it will ever grow, I can also send an additional patch
> simplifying it.
I haven't got any response from the original person who submitted this
patch. It isn't clear to me whether this is a fix for some machine
that's in wide use, or a workaround for a prototype sitting on someone's
bench.
Andi has already accepted my more general patch which allows
intercepting the halt/reboot process in arbitrary ways (the machine_ops
patch), so that would seem to be a better way of handling this problem
if more cases arise.
J
^ permalink raw reply [flat|nested] 60+ messages in thread
* [-mm patch] make drivers/net/qla3xxx.c:PHY_DEVICES[] static
2007-03-30 8:05 2.6.21-rc5-mm3 Andrew Morton
` (8 preceding siblings ...)
2007-03-31 20:55 ` [2.6 patch] remove the config option for the cs5530a_warm_reset() quirk Adrian Bunk
@ 2007-03-31 20:55 ` Adrian Bunk
2007-04-04 2:34 ` Jeff Garzik
2007-03-31 20:55 ` [-mm patch] make struct proc_fdinfo_file_operations static Adrian Bunk
2007-04-01 16:00 ` 2.6.21-rc5-mm3 Michal Piotrowski
11 siblings, 1 reply; 60+ messages in thread
From: Adrian Bunk @ 2007-03-31 20:55 UTC (permalink / raw)
To: Andrew Morton, linux-driver, jgarzik; +Cc: linux-kernel, netdev
On Fri, Mar 30, 2007 at 01:05:59AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.21-rc5-mm2:
>...
> git-netdev-all.patch
>...
> git trees
>...
This patch makes the needlessly global PHY_DEVICES[] static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
BTW: Why is the name uppercase?
--- linux-2.6.21-rc5-mm3/drivers/net/qla3xxx.c.old 2007-03-31 21:30:20.000000000 +0200
+++ linux-2.6.21-rc5-mm3/drivers/net/qla3xxx.c 2007-03-31 22:02:00.000000000 +0200
@@ -88,7 +88,7 @@
char *name;
} PHY_DEVICE_INFO_t;
-const PHY_DEVICE_INFO_t PHY_DEVICES[] =
+static const PHY_DEVICE_INFO_t PHY_DEVICES[] =
{{PHY_TYPE_UNKNOWN, 0x000000, 0x0, "PHY_TYPE_UNKNOWN"},
{PHY_VITESSE_VSC8211, 0x0003f1, 0xb, "PHY_VITESSE_VSC8211"},
{PHY_AGERE_ET1011C, 0x00a0bc, 0x1, "PHY_AGERE_ET1011C"},
^ permalink raw reply [flat|nested] 60+ messages in thread* Re: [-mm patch] make drivers/net/qla3xxx.c:PHY_DEVICES[] static
2007-03-31 20:55 ` [-mm patch] make drivers/net/qla3xxx.c:PHY_DEVICES[] static Adrian Bunk
@ 2007-04-04 2:34 ` Jeff Garzik
2007-04-04 17:11 ` Ron Mercer
0 siblings, 1 reply; 60+ messages in thread
From: Jeff Garzik @ 2007-04-04 2:34 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, linux-driver, linux-kernel, netdev
Adrian Bunk wrote:
> On Fri, Mar 30, 2007 at 01:05:59AM -0700, Andrew Morton wrote:
>> ...
>> Changes since 2.6.21-rc5-mm2:
>> ...
>> git-netdev-all.patch
>> ...
>> git trees
>> ...
>
>
> This patch makes the needlessly global PHY_DEVICES[] static.
>
> Signed-off-by: Adrian Bunk <bunk@stusta.de>
>
> ---
>
> BTW: Why is the name uppercase?
applied
^ permalink raw reply [flat|nested] 60+ messages in thread
* RE: [-mm patch] make drivers/net/qla3xxx.c:PHY_DEVICES[] static
2007-04-04 2:34 ` Jeff Garzik
@ 2007-04-04 17:11 ` Ron Mercer
0 siblings, 0 replies; 60+ messages in thread
From: Ron Mercer @ 2007-04-04 17:11 UTC (permalink / raw)
To: Jeff Garzik, Adrian Bunk; +Cc: netdev
Adrian,
Sorry about the upper case stuff. The new PHY code was ported from our
firmware guys and the case didn't not get changed. I normally will make
such changes but it didn't get done this time. I will clean it up in
the near future.
Ron
> -----Original Message-----
> From: Jeff Garzik [mailto:jgarzik@pobox.com]
> Sent: Tuesday, April 03, 2007 7:34 PM
> To: Adrian Bunk
> Cc: Andrew Morton; Linux Driver;
> linux-kernel@vger.kernel.org; netdev@vger.kernel.org
> Subject: Re: [-mm patch] make
> drivers/net/qla3xxx.c:PHY_DEVICES[] static
>
> Adrian Bunk wrote:
> > On Fri, Mar 30, 2007 at 01:05:59AM -0700, Andrew Morton wrote:
> >> ...
> >> Changes since 2.6.21-rc5-mm2:
> >> ...
> >> git-netdev-all.patch
> >> ...
> >> git trees
> >> ...
> >
> >
> > This patch makes the needlessly global PHY_DEVICES[] static.
> >
> > Signed-off-by: Adrian Bunk <bunk@stusta.de>
> >
> > ---
> >
> > BTW: Why is the name uppercase?
>
> applied
>
>
>
^ permalink raw reply [flat|nested] 60+ messages in thread
* [-mm patch] make struct proc_fdinfo_file_operations static
2007-03-30 8:05 2.6.21-rc5-mm3 Andrew Morton
` (9 preceding siblings ...)
2007-03-31 20:55 ` [-mm patch] make drivers/net/qla3xxx.c:PHY_DEVICES[] static Adrian Bunk
@ 2007-03-31 20:55 ` Adrian Bunk
2007-04-01 16:00 ` 2.6.21-rc5-mm3 Michal Piotrowski
11 siblings, 0 replies; 60+ messages in thread
From: Adrian Bunk @ 2007-03-31 20:55 UTC (permalink / raw)
To: Andrew Morton, Miklos Szeredi; +Cc: linux-kernel
On Fri, Mar 30, 2007 at 01:05:59AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.21-rc5-mm2:
>...
> +add-file-position-info-to-proc.patch
>
> /proc feature work
>...
This patch makes the needlessly global
struct proc_fdinfo_file_operations static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
--- linux-2.6.21-rc5-mm3/fs/proc/base.c.old 2007-03-31 22:07:21.000000000 +0200
+++ linux-2.6.21-rc5-mm3/fs/proc/base.c 2007-03-31 22:07:30.000000000 +0200
@@ -1515,7 +1515,7 @@
return err;
}
-const struct file_operations proc_fdinfo_file_operations = {
+static const struct file_operations proc_fdinfo_file_operations = {
.open = nonseekable_open,
.read = proc_fdinfo_read,
};
^ permalink raw reply [flat|nested] 60+ messages in thread* Re: 2.6.21-rc5-mm3
2007-03-30 8:05 2.6.21-rc5-mm3 Andrew Morton
` (10 preceding siblings ...)
2007-03-31 20:55 ` [-mm patch] make struct proc_fdinfo_file_operations static Adrian Bunk
@ 2007-04-01 16:00 ` Michal Piotrowski
2007-04-01 19:03 ` 2.6.21-rc5-mm3 Andrew Morton
11 siblings, 1 reply; 60+ messages in thread
From: Michal Piotrowski @ 2007-04-01 16:00 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Andrew Morton napisał(a):
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm3/
>
BUG: at /mnt/md0/devel/linux-mm/arch/i386/kernel/smp.c:571 native_smp_call_function_mask()
[<c01051a1>] dump_trace+0x63/0x1eb
[<c0105343>] show_trace_log_lvl+0x1a/0x30
[<c0105f8a>] show_trace+0x12/0x14
[<c0106027>] dump_stack+0x16/0x18
[<c0113a92>] native_smp_call_function_mask+0x57/0x14b
[<c0113c9b>] smp_call_function+0x1e/0x22
[<c0129a60>] on_each_cpu+0x2a/0x73
[<c013a12d>] clock_was_set+0x1b/0x1d
[<c013b99d>] timekeeping_resume+0xb5/0xbb
[<c027af35>] __sysdev_resume+0x17/0x5d
[<c027b2aa>] sysdev_resume+0x19/0x4b
[<c027fd12>] device_power_up+0xb/0x12
[<c014f30b>] swsusp_suspend+0x55/0x63
[<c014fad0>] pm_suspend_disk+0x163/0x28f
[<c014e7be>] enter_state+0x54/0x1d5
[<c014e9c5>] state_store+0x86/0x9c
[<c01bfe47>] subsys_attr_store+0x23/0x2b
[<c01bff89>] sysfs_write_file+0xc1/0xe9
[<c0186485>] vfs_write+0xd1/0x15a
[<c0186ab7>] sys_write+0x3d/0x72
[<c010424c>] syscall_call+0x7/0xb
[<b7f9b410>] 0xb7f9b410
=======================
BUG: using smp_processor_id() in preemptible [00000001] code: swsusp_shutdown/3246
caller is setup_apic_nmi_watchdog+0x13/0x423
[<c01051a1>] dump_trace+0x63/0x1eb
[<c0105343>] show_trace_log_lvl+0x1a/0x30
[<c0105f8a>] show_trace+0x12/0x14
[<c0106027>] dump_stack+0x16/0x18
[<c021a0ff>] debug_smp_processor_id+0xb3/0xc8
[<c011633d>] setup_apic_nmi_watchdog+0x13/0x423
[<c0116871>] lapic_nmi_resume+0x16/0x1f
[<c027af35>] __sysdev_resume+0x17/0x5d
[<c027b2aa>] sysdev_resume+0x19/0x4b
[<c027fd12>] device_power_up+0xb/0x12
[<c014f30b>] swsusp_suspend+0x55/0x63
[<c014fad0>] pm_suspend_disk+0x163/0x28f
[<c014e7be>] enter_state+0x54/0x1d5
[<c014e9c5>] state_store+0x86/0x9c
[<c01bfe47>] subsys_attr_store+0x23/0x2b
[<c01bff89>] sysfs_write_file+0xc1/0xe9
[<c0186485>] vfs_write+0xd1/0x15a
[<c0186ab7>] sys_write+0x3d/0x72
[<c010424c>] syscall_call+0x7/0xb
[<b7f9b410>] 0xb7f9b410
l *setup_apic_nmi_watchdog+0x13
0xc011633d is in setup_apic_nmi_watchdog (/mnt/md0/devel/linux-mm/arch/i386/kernel/nmi.c:793).
788 release_perfctr_nmi(wd->perfctr_msr);
789 }
790
791 void setup_apic_nmi_watchdog (void *unused)
792 {
793 struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
794
795 /* only support LOCAL and IO APICs for now */
796 if ((nmi_watchdog != NMI_LOCAL_APIC) &&
797 (nmi_watchdog != NMI_IO_APIC))
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.21-rc5-mm3/mm-console3.log
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.21-rc5-mm3/mm-config2
Regards,
Michal
--
Michal K. K. Piotrowski
Hurd Testers Group
(http://www.hurdtestersgroup.org/)
^ permalink raw reply [flat|nested] 60+ messages in thread* Re: 2.6.21-rc5-mm3
2007-04-01 16:00 ` 2.6.21-rc5-mm3 Michal Piotrowski
@ 2007-04-01 19:03 ` Andrew Morton
2007-04-01 20:39 ` 2.6.21-rc5-mm3 Rafael J. Wysocki
0 siblings, 1 reply; 60+ messages in thread
From: Andrew Morton @ 2007-04-01 19:03 UTC (permalink / raw)
To: Michal Piotrowski
Cc: linux-kernel, Rafael J. Wysocki, Pavel Machek, john stultz,
Thomas Gleixner
On Sun, 01 Apr 2007 18:00:12 +0200 Michal Piotrowski <michal.k.k.piotrowski@gmail.com> wrote:
> Andrew Morton napisał(a):
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm3/
> >
>
> BUG: at /mnt/md0/devel/linux-mm/arch/i386/kernel/smp.c:571 native_smp_call_function_mask()
> [<c01051a1>] dump_trace+0x63/0x1eb
> [<c0105343>] show_trace_log_lvl+0x1a/0x30
> [<c0105f8a>] show_trace+0x12/0x14
> [<c0106027>] dump_stack+0x16/0x18
> [<c0113a92>] native_smp_call_function_mask+0x57/0x14b
> [<c0113c9b>] smp_call_function+0x1e/0x22
> [<c0129a60>] on_each_cpu+0x2a/0x73
> [<c013a12d>] clock_was_set+0x1b/0x1d
> [<c013b99d>] timekeeping_resume+0xb5/0xbb
> [<c027af35>] __sysdev_resume+0x17/0x5d
> [<c027b2aa>] sysdev_resume+0x19/0x4b
> [<c027fd12>] device_power_up+0xb/0x12
> [<c014f30b>] swsusp_suspend+0x55/0x63
> [<c014fad0>] pm_suspend_disk+0x163/0x28f
> [<c014e7be>] enter_state+0x54/0x1d5
> [<c014e9c5>] state_store+0x86/0x9c
> [<c01bfe47>] subsys_attr_store+0x23/0x2b
> [<c01bff89>] sysfs_write_file+0xc1/0xe9
> [<c0186485>] vfs_write+0xd1/0x15a
> [<c0186ab7>] sys_write+0x3d/0x72
> [<c010424c>] syscall_call+0x7/0xb
> [<b7f9b410>] 0xb7f9b410
We're calling smp_call_function() with local interrupts disabled, which is
deadlockable.
This, I expect, is because swsusp_suspend() optimistically tries to run
everything with local interrupts disabled.
I don't know why this has suddenly started happening -
timekeeping_resume()->clock_was_set()->on_each_cpu() has been there for a
while. Doesn't mainline do the same thing?
Not sure what to do about this. The best fix would be to teach swsusp to
not be so optmistic: resume functions are called with local irqs _enabled_
- that's part of their call environment. swsusp tries to call them with
local irqs disabled and bad things happen.
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3
2007-04-01 19:03 ` 2.6.21-rc5-mm3 Andrew Morton
@ 2007-04-01 20:39 ` Rafael J. Wysocki
2007-04-01 20:56 ` 2.6.21-rc5-mm3 Rafael J. Wysocki
2007-04-01 21:59 ` 2.6.21-rc5-mm3 Rafael J. Wysocki
0 siblings, 2 replies; 60+ messages in thread
From: Rafael J. Wysocki @ 2007-04-01 20:39 UTC (permalink / raw)
To: Andrew Morton
Cc: Michal Piotrowski, linux-kernel, Pavel Machek, john stultz,
Thomas Gleixner
On Sunday, 1 April 2007 21:03, Andrew Morton wrote:
> On Sun, 01 Apr 2007 18:00:12 +0200 Michal Piotrowski <michal.k.k.piotrowski@gmail.com> wrote:
>
> > Andrew Morton napisał(a):
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm3/
> > >
> >
> > BUG: at /mnt/md0/devel/linux-mm/arch/i386/kernel/smp.c:571 native_smp_call_function_mask()
> > [<c01051a1>] dump_trace+0x63/0x1eb
> > [<c0105343>] show_trace_log_lvl+0x1a/0x30
> > [<c0105f8a>] show_trace+0x12/0x14
> > [<c0106027>] dump_stack+0x16/0x18
> > [<c0113a92>] native_smp_call_function_mask+0x57/0x14b
> > [<c0113c9b>] smp_call_function+0x1e/0x22
> > [<c0129a60>] on_each_cpu+0x2a/0x73
> > [<c013a12d>] clock_was_set+0x1b/0x1d
> > [<c013b99d>] timekeeping_resume+0xb5/0xbb
> > [<c027af35>] __sysdev_resume+0x17/0x5d
> > [<c027b2aa>] sysdev_resume+0x19/0x4b
> > [<c027fd12>] device_power_up+0xb/0x12
> > [<c014f30b>] swsusp_suspend+0x55/0x63
> > [<c014fad0>] pm_suspend_disk+0x163/0x28f
> > [<c014e7be>] enter_state+0x54/0x1d5
> > [<c014e9c5>] state_store+0x86/0x9c
> > [<c01bfe47>] subsys_attr_store+0x23/0x2b
> > [<c01bff89>] sysfs_write_file+0xc1/0xe9
> > [<c0186485>] vfs_write+0xd1/0x15a
> > [<c0186ab7>] sys_write+0x3d/0x72
> > [<c010424c>] syscall_call+0x7/0xb
> > [<b7f9b410>] 0xb7f9b410
>
> We're calling smp_call_function() with local interrupts disabled, which is
> deadlockable.
>
> This, I expect, is because swsusp_suspend() optimistically tries to run
> everything with local interrupts disabled.
Well, not everything, but device_power_down()/device_power_up() which only
handle sysdevs.
> I don't know why this has suddenly started happening -
> timekeeping_resume()->clock_was_set()->on_each_cpu() has been there for a
> while. Doesn't mainline do the same thing?
Yes, and it has always done it. It even is documented in
Documentation/power/devices.txt:System Devices . ;-)
> Not sure what to do about this. The best fix would be to teach swsusp to
> not be so optmistic: resume functions are called with local irqs _enabled_
> - that's part of their call environment. swsusp tries to call them with
> local irqs disabled and bad things happen.
I think timekeeping_resume() shouldn't call smp_call_function() ...
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3
2007-04-01 20:39 ` 2.6.21-rc5-mm3 Rafael J. Wysocki
@ 2007-04-01 20:56 ` Rafael J. Wysocki
2007-04-01 21:59 ` 2.6.21-rc5-mm3 Rafael J. Wysocki
1 sibling, 0 replies; 60+ messages in thread
From: Rafael J. Wysocki @ 2007-04-01 20:56 UTC (permalink / raw)
To: Andrew Morton
Cc: Michal Piotrowski, linux-kernel, Pavel Machek, john stultz,
Thomas Gleixner
On Sunday, 1 April 2007 22:39, Rafael J. Wysocki wrote:
> On Sunday, 1 April 2007 21:03, Andrew Morton wrote:
> > On Sun, 01 Apr 2007 18:00:12 +0200 Michal Piotrowski <michal.k.k.piotrowski@gmail.com> wrote:
> >
> > > Andrew Morton napisał(a):
> > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm3/
> > > >
> > >
> > > BUG: at /mnt/md0/devel/linux-mm/arch/i386/kernel/smp.c:571 native_smp_call_function_mask()
> > > [<c01051a1>] dump_trace+0x63/0x1eb
> > > [<c0105343>] show_trace_log_lvl+0x1a/0x30
> > > [<c0105f8a>] show_trace+0x12/0x14
> > > [<c0106027>] dump_stack+0x16/0x18
> > > [<c0113a92>] native_smp_call_function_mask+0x57/0x14b
> > > [<c0113c9b>] smp_call_function+0x1e/0x22
> > > [<c0129a60>] on_each_cpu+0x2a/0x73
> > > [<c013a12d>] clock_was_set+0x1b/0x1d
> > > [<c013b99d>] timekeeping_resume+0xb5/0xbb
> > > [<c027af35>] __sysdev_resume+0x17/0x5d
> > > [<c027b2aa>] sysdev_resume+0x19/0x4b
> > > [<c027fd12>] device_power_up+0xb/0x12
> > > [<c014f30b>] swsusp_suspend+0x55/0x63
> > > [<c014fad0>] pm_suspend_disk+0x163/0x28f
> > > [<c014e7be>] enter_state+0x54/0x1d5
> > > [<c014e9c5>] state_store+0x86/0x9c
> > > [<c01bfe47>] subsys_attr_store+0x23/0x2b
> > > [<c01bff89>] sysfs_write_file+0xc1/0xe9
> > > [<c0186485>] vfs_write+0xd1/0x15a
> > > [<c0186ab7>] sys_write+0x3d/0x72
> > > [<c010424c>] syscall_call+0x7/0xb
> > > [<b7f9b410>] 0xb7f9b410
> >
> > We're calling smp_call_function() with local interrupts disabled, which is
> > deadlockable.
> >
> > This, I expect, is because swsusp_suspend() optimistically tries to run
> > everything with local interrupts disabled.
>
> Well, not everything, but device_power_down()/device_power_up() which only
> handle sysdevs.
>
> > I don't know why this has suddenly started happening -
> > timekeeping_resume()->clock_was_set()->on_each_cpu() has been there for a
> > while. Doesn't mainline do the same thing?
>
> Yes, and it has always done it. It even is documented in
> Documentation/power/devices.txt:System Devices . ;-)
>
> > Not sure what to do about this. The best fix would be to teach swsusp to
> > not be so optmistic: resume functions are called with local irqs _enabled_
> > - that's part of their call environment. swsusp tries to call them with
> > local irqs disabled and bad things happen.
>
> I think timekeeping_resume() shouldn't call smp_call_function() ...
... which even is unnecessary, because sysdev_resume() runs on _one_ CPU.
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: 2.6.21-rc5-mm3
2007-04-01 20:39 ` 2.6.21-rc5-mm3 Rafael J. Wysocki
2007-04-01 20:56 ` 2.6.21-rc5-mm3 Rafael J. Wysocki
@ 2007-04-01 21:59 ` Rafael J. Wysocki
1 sibling, 0 replies; 60+ messages in thread
From: Rafael J. Wysocki @ 2007-04-01 21:59 UTC (permalink / raw)
To: Andrew Morton
Cc: Michal Piotrowski, linux-kernel, Pavel Machek, john stultz,
Thomas Gleixner
On Sunday, 1 April 2007 22:39, Rafael J. Wysocki wrote:
> On Sunday, 1 April 2007 21:03, Andrew Morton wrote:
> > On Sun, 01 Apr 2007 18:00:12 +0200 Michal Piotrowski <michal.k.k.piotrowski@gmail.com> wrote:
> >
> > > Andrew Morton napisał(a):
> > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm3/
> > > >
> > >
> > > BUG: at /mnt/md0/devel/linux-mm/arch/i386/kernel/smp.c:571 native_smp_call_function_mask()
> > > [<c01051a1>] dump_trace+0x63/0x1eb
> > > [<c0105343>] show_trace_log_lvl+0x1a/0x30
> > > [<c0105f8a>] show_trace+0x12/0x14
> > > [<c0106027>] dump_stack+0x16/0x18
> > > [<c0113a92>] native_smp_call_function_mask+0x57/0x14b
> > > [<c0113c9b>] smp_call_function+0x1e/0x22
> > > [<c0129a60>] on_each_cpu+0x2a/0x73
> > > [<c013a12d>] clock_was_set+0x1b/0x1d
> > > [<c013b99d>] timekeeping_resume+0xb5/0xbb
> > > [<c027af35>] __sysdev_resume+0x17/0x5d
> > > [<c027b2aa>] sysdev_resume+0x19/0x4b
> > > [<c027fd12>] device_power_up+0xb/0x12
> > > [<c014f30b>] swsusp_suspend+0x55/0x63
> > > [<c014fad0>] pm_suspend_disk+0x163/0x28f
> > > [<c014e7be>] enter_state+0x54/0x1d5
> > > [<c014e9c5>] state_store+0x86/0x9c
> > > [<c01bfe47>] subsys_attr_store+0x23/0x2b
> > > [<c01bff89>] sysfs_write_file+0xc1/0xe9
> > > [<c0186485>] vfs_write+0xd1/0x15a
> > > [<c0186ab7>] sys_write+0x3d/0x72
> > > [<c010424c>] syscall_call+0x7/0xb
> > > [<b7f9b410>] 0xb7f9b410
> >
> > We're calling smp_call_function() with local interrupts disabled, which is
> > deadlockable.
> >
> > This, I expect, is because swsusp_suspend() optimistically tries to run
> > everything with local interrupts disabled.
>
> Well, not everything, but device_power_down()/device_power_up() which only
> handle sysdevs.
>
> > I don't know why this has suddenly started happening -
> > timekeeping_resume()->clock_was_set()->on_each_cpu() has been there for a
> > while. Doesn't mainline do the same thing?
>
> Yes, and it has always done it. It even is documented in
> Documentation/power/devices.txt:System Devices . ;-)
Some clarification is necessary, I suppose:
I meant that the mainline had always called device_power_up() with IRQs
disabled, which was documented.
_OTOH_ the clock_was_set() was added to timekeeping_resume() after
2.6.20 and it shouldn't call on_each_cpu(), because it is run on one CPU.
Greetings,
Rafael (who's apparently too tired to read email now)
^ permalink raw reply [flat|nested] 60+ messages in thread