* [PATCH 0/2] of_device 8xx PCMCIA support && cleanup
@ 2007-05-06 1:26 ` Vitaly Bordug
0 siblings, 0 replies; 10+ messages in thread
From: Vitaly Bordug @ 2007-05-06 1:26 UTC (permalink / raw)
To: linux-pcmcia; +Cc: linuxppc-dev, linux-kernel, linuxppc-dev
Current series features the reworked 8xx of_device PCMCIA patch
based on feedback from Andrew + indentation & whitespace fixes
in drivers/pcmcia/m8xx_pcmcia.c
Andrew,
Please disregard previous patch since it contains a typo. Indentation
patch is not strictly necessary but is useful too, imho.
--
-Vitaly
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 0/2] of_device 8xx PCMCIA support && cleanup
@ 2007-05-06 1:26 ` Vitaly Bordug
0 siblings, 0 replies; 10+ messages in thread
From: Vitaly Bordug @ 2007-05-06 1:26 UTC (permalink / raw)
To: linux-pcmcia; +Cc: linuxppc-dev, linux-kernel
Current series features the reworked 8xx of_device PCMCIA patch
based on feedback from Andrew + indentation & whitespace fixes
in drivers/pcmcia/m8xx_pcmcia.c
Andrew,
Please disregard previous patch since it contains a typo. Indentation
patch is not strictly necessary but is useful too, imho.
--
-Vitaly
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/2] [POWERPC] 8xx: mpc885ads pcmcia support
2007-05-06 1:26 ` Vitaly Bordug
@ 2007-05-06 1:26 ` Vitaly Bordug
-1 siblings, 0 replies; 10+ messages in thread
From: Vitaly Bordug @ 2007-05-06 1:26 UTC (permalink / raw)
To: linux-pcmcia; +Cc: linuxppc-dev, linux-kernel, linuxppc-dev
Adds support for PowerQuicc on-chip PCMCIA. The driver is implemented as
of_device, so only arch/powerpc stuff is capable to use it, which now
implies only mpc885ads reference board.
To cope with the code that should be hooked inside driver, but is really
board specific (like set_voltage), global structure mpc8xx_pcmcia_ops
holds necessary function pointers that are filled in the BSP code.
Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
arch/powerpc/boot/dts/mpc885ads.dts | 12 +
arch/powerpc/platforms/8xx/m8xx_setup.c | 5
arch/powerpc/platforms/8xx/mpc885ads.h | 8 +
arch/powerpc/platforms/8xx/mpc885ads_setup.c | 76 ++++++
arch/powerpc/sysdev/fsl_soc.c | 13 +
arch/powerpc/sysdev/mpc8xx_pic.h | 2
drivers/pcmcia/Kconfig | 1
drivers/pcmcia/m8xx_pcmcia.c | 351 ++++++++++++--------------
include/asm-powerpc/mpc8xx.h | 4
include/linux/fsl_devices.h | 5
10 files changed, 292 insertions(+), 185 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index 110bf61..0f3e8cf 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -112,6 +112,18 @@
compatible = "CPM";
};
+ pcmcia@0080 {
+ linux,phandle = <0080>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ compatible = "fsl,pq-pcmcia";
+ device_type = "pcmcia";
+ reg = <80 80>;
+ clock-frequency = <2faf080>;
+ interrupt-parent = <ff000000>;
+ interrupts = <d 1>;
+ };
+
cpm@ff000000 {
linux,phandle = <ff000000>;
#address-cells = <1>;
diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
index 0901dba..f169355 100644
--- a/arch/powerpc/platforms/8xx/m8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -32,6 +32,7 @@
#include <linux/root_dev.h>
#include <linux/time.h>
#include <linux/rtc.h>
+#include <linux/fsl_devices.h>
#include <asm/mmu.h>
#include <asm/reg.h>
@@ -49,6 +50,10 @@
#include "sysdev/mpc8xx_pic.h"
+#ifdef CONFIG_PCMCIA_M8XX
+struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
+#endif
+
void m8xx_calibrate_decr(void);
extern void m8xx_wdt_handler_install(bd_t *bp);
extern int cpm_pic_init(void);
diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h
index 7c31aec..932b59a 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads.h
+++ b/arch/powerpc/platforms/8xx/mpc885ads.h
@@ -91,5 +91,13 @@
#define SICR_ENET_MASK ((uint)0x00ff0000)
#define SICR_ENET_CLKRT ((uint)0x002c0000)
+/*
+ * Some internal interrupt registers use an 8-bit mask for the interrupt
+ * level instead of a number.
+ */
+static inline uint mk_int_int_mask(uint mask) {
+ return (1 << (7 - (mask/2)));
+}
+
#endif /* __ASM_MPC885ADS_H__ */
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
index a57b577..4e76e1c 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
@@ -22,6 +22,7 @@
#include <linux/fs_enet_pd.h>
#include <linux/fs_uart_pd.h>
+#include <linux/fsl_devices.h>
#include <linux/mii.h>
#include <asm/delay.h>
@@ -51,6 +52,11 @@ static void init_smc1_uart_ioports(struct fs_uart_platform_info* fpi);
static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi);
static void init_scc3_ioports(struct fs_platform_info* ptr);
+#ifdef CONFIG_PCMCIA_M8XX
+static void pcmcia_hw_setup(int slot, int enable);
+static int pcmcia_set_voltage(int slot, int vcc, int vpp);
+#endif
+
void __init mpc885ads_board_setup(void)
{
cpm8xx_t *cp;
@@ -115,6 +121,12 @@ void __init mpc885ads_board_setup(void)
immr_unmap(io_port);
#endif
+
+#ifdef CONFIG_PCMCIA_M8XX
+ /*Set up board specific hook-ups*/
+ m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup;
+ m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage;
+#endif
}
@@ -322,6 +334,70 @@ void init_smc_ioports(struct fs_uart_platform_info *data)
}
}
+#ifdef CONFIG_PCMCIA_M8XX
+static void pcmcia_hw_setup(int slot, int enable)
+{
+ unsigned *bcsr_io;
+
+ bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+ if (enable)
+ clrbits32(bcsr_io, BCSR1_PCCEN);
+ else
+ setbits32(bcsr_io, BCSR1_PCCEN);
+
+ iounmap(bcsr_io);
+}
+
+static int pcmcia_set_voltage(int slot, int vcc, int vpp)
+{
+ u32 reg = 0;
+ unsigned *bcsr_io;
+
+ bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+
+ switch(vcc) {
+ case 0:
+ break;
+ case 33:
+ reg |= BCSR1_PCCVCC0;
+ break;
+ case 50:
+ reg |= BCSR1_PCCVCC1;
+ break;
+ default:
+ return 1;
+ }
+
+ switch(vpp) {
+ case 0:
+ break;
+ case 33:
+ case 50:
+ if(vcc == vpp)
+ reg |= BCSR1_PCCVPP1;
+ else
+ return 1;
+ break;
+ case 120:
+ if ((vcc == 33) || (vcc == 50))
+ reg |= BCSR1_PCCVPP0;
+ else
+ return 1;
+ default:
+ return 1;
+ }
+
+ /* first, turn off all power */
+ clrbits32(bcsr_io, 0x00610000);
+
+ /* enable new powersettings */
+ setbits32(bcsr_io, reg);
+
+ iounmap(bcsr_io);
+ return 0;
+}
+#endif
+
int platform_device_skip(const char *model, int id)
{
#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 8a123c7..880e45f 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -1028,6 +1028,19 @@ err:
arch_initcall(fs_enet_of_init);
+static int __init fsl_pcmcia_of_init(void)
+{
+ struct device_node *np = NULL;
+ /*
+ * Register all the devices which type is "pcmcia"
+ */
+ while ((np = of_find_compatible_node(np,
+ "pcmcia", "fsl,pq-pcmcia")) != NULL)
+ of_platform_device_create(np, "m8xx-pcmcia", NULL);
+ return 0;
+}
+
+arch_initcall(fsl_pcmcia_of_init);
static const char *smc_regs = "regs";
static const char *smc_pram = "pram";
diff --git a/arch/powerpc/sysdev/mpc8xx_pic.h b/arch/powerpc/sysdev/mpc8xx_pic.h
index afa2ee6..07be061 100644
--- a/arch/powerpc/sysdev/mpc8xx_pic.h
+++ b/arch/powerpc/sysdev/mpc8xx_pic.h
@@ -4,7 +4,7 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
-extern struct hw_interrupt_type mpc8xx_pic;
+/*extern struct hw_interrupt_type mpc8xx_pic;*/
int mpc8xx_pic_init(void);
unsigned int mpc8xx_get_irq(void);
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 35f8864..c3fd55d 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -183,6 +183,7 @@ config PCMCIA_M8XX
tristate "MPC8xx PCMCIA support"
depends on PCMCIA && PPC && 8xx
select PCCARD_IODYN
+ select PCCARD_NONSTATIC
help
Say Y here to include support for PowerPC 8xx series PCMCIA
controller.
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 9721ed7..40f6e20 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -10,7 +10,7 @@
* Further fixes, v2.6 kernel port
* <marcelo.tosatti@cyclades.com>
*
- * Some fixes, additions (C) 2005 Montavista Software, Inc.
+ * Some fixes, additions (C) 2005-2007 Montavista Software, Inc.
* <vbordug@ru.mvista.com>
*
* "The ExCA standard specifies that socket controllers should provide
@@ -40,10 +40,6 @@
#include <linux/fcntl.h>
#include <linux/string.h>
-#include <asm/io.h>
-#include <asm/bitops.h>
-#include <asm/system.h>
-
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
@@ -51,11 +47,18 @@
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+#include <asm/io.h>
+#include <asm/bitops.h>
+#include <asm/system.h>
+#include <asm/time.h>
#include <asm/mpc8xx.h>
#include <asm/8xx_immap.h>
#include <asm/irq.h>
+#include <asm/fs_pd.h>
+#include <asm/of_device.h>
+#include <asm/of_platform.h>
#include <pcmcia/version.h>
#include <pcmcia/cs_types.h>
@@ -146,27 +149,17 @@ MODULE_LICENSE("Dual MPL/GPL");
#define PCMCIA_MEM_WIN_BASE 0xe0000000 /* base address for memory window 0 */
#define PCMCIA_MEM_WIN_SIZE 0x04000000 /* each memory window is 64 MByte */
#define PCMCIA_IO_WIN_BASE _IO_BASE /* base address for io window 0 */
-
-#define PCMCIA_SCHLVL PCMCIA_INTERRUPT /* Status Change Interrupt Level */
-
/* ------------------------------------------------------------------------- */
-/* 2.4.x and newer has this always in HZ */
-#define M8XX_BUSFREQ ((((bd_t *)&(__res))->bi_busfreq))
-
-static int pcmcia_schlvl = PCMCIA_SCHLVL;
+static int pcmcia_schlvl;
static DEFINE_SPINLOCK(events_lock);
-
#define PCMCIA_SOCKET_KEY_5V 1
#define PCMCIA_SOCKET_KEY_LV 2
/* look up table for pgcrx registers */
-static u32 *m8xx_pgcrx[2] = {
- &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pgcra,
- &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pgcrb
-};
+static u32 *m8xx_pgcrx[2];
/*
* This structure is used to address each window in the PCMCIA controller.
@@ -228,11 +221,16 @@ struct event_table {
u32 eventbit;
};
+static const char driver_name[] = "m8xx-pcmcia";
+
struct socket_info {
void (*handler)(void *info, u32 events);
void *info;
u32 slot;
+ pcmconf8xx_t *pcmcia;
+ u32 bus_freq;
+ int hwirq;
socket_state_t state;
struct pccard_mem_map mem_win[PCMCIA_MEM_WIN_NO];
@@ -408,78 +406,21 @@ static void hardware_disable(int slot)
#if defined(CONFIG_MPC885ADS)
#define PCMCIA_BOARD_MSG "MPC885ADS"
+#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-static int voltage_set(int slot, int vcc, int vpp)
+static inline void hardware_enable(int slot)
{
- u32 reg = 0;
- unsigned *bcsr_io;
-
- bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
- switch(vcc) {
- case 0:
- break;
- case 33:
- reg |= BCSR1_PCCVCC0;
- break;
- case 50:
- reg |= BCSR1_PCCVCC1;
- break;
- default:
- goto out_unmap;
- }
-
- switch(vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if(vcc == vpp)
- reg |= BCSR1_PCCVPP1;
- else
- goto out_unmap;
- break;
- case 120:
- if ((vcc == 33) || (vcc == 50))
- reg |= BCSR1_PCCVPP0;
- else
- goto out_unmap;
- default:
- goto out_unmap;
- }
-
- /* first, turn off all power */
- out_be32(bcsr_io, in_be32(bcsr_io) & ~(BCSR1_PCCVCC_MASK | BCSR1_PCCVPP_MASK));
-
- /* enable new powersettings */
- out_be32(bcsr_io, in_be32(bcsr_io) | reg);
-
- iounmap(bcsr_io);
- return 0;
-
-out_unmap:
- iounmap(bcsr_io);
- return 1;
+ m8xx_pcmcia_ops.hw_ctrl(slot, 1);
}
-#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-
-static void hardware_enable(int slot)
+static inline void hardware_disable(int slot)
{
- unsigned *bcsr_io;
-
- bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
- out_be32(bcsr_io, in_be32(bcsr_io) & ~BCSR1_PCCEN);
- iounmap(bcsr_io);
+ m8xx_pcmcia_ops.hw_ctrl(slot, 0);
}
-static void hardware_disable(int slot)
+static inline int voltage_set(int slot, int vcc, int vpp)
{
- unsigned *bcsr_io;
-
- bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
- out_be32(bcsr_io, in_be32(bcsr_io) | BCSR1_PCCEN);
- iounmap(bcsr_io);
+ return m8xx_pcmcia_ops.voltage_set(slot, vcc, vpp);
}
#endif
@@ -604,48 +545,6 @@ static int voltage_set(int slot, int vcc, int vpp)
#endif /* CONFIG_PRxK */
-static void m8xx_shutdown(void)
-{
- u32 m, i;
- struct pcmcia_win *w;
-
- for(i = 0; i < PCMCIA_SOCKETS_NO; i++){
- w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
-
- out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr, M8XX_PCMCIA_MASK(i));
- out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per, in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per) & ~M8XX_PCMCIA_MASK(i));
-
- /* turn off interrupt and disable CxOE */
- out_be32(M8XX_PGCRX(i), M8XX_PGCRX_CXOE);
-
- /* turn off memory windows */
- for(m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
- out_be32(&w->or, 0); /* set to not valid */
- w++;
- }
-
- /* turn off voltage */
- voltage_set(i, 0, 0);
-
- /* disable external hardware */
- hardware_disable(i);
- }
-
- free_irq(pcmcia_schlvl, NULL);
-}
-
-static struct device_driver m8xx_driver = {
- .name = "m8xx-pcmcia",
- .bus = &platform_bus_type,
- .suspend = pcmcia_socket_dev_suspend,
- .resume = pcmcia_socket_dev_resume,
-};
-
-static struct platform_device m8xx_device = {
- .name = "m8xx-pcmcia",
- .id = 0,
-};
-
static u32 pending_events[PCMCIA_SOCKETS_NO];
static DEFINE_SPINLOCK(pending_event_lock);
@@ -654,13 +553,14 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
struct socket_info *s;
struct event_table *e;
unsigned int i, events, pscr, pipr, per;
+ pcmconf8xx_t *pcmcia = socket[0].pcmcia;
dprintk("Interrupt!\n");
/* get interrupt sources */
- pscr = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr);
- pipr = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pipr);
- per = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per);
+ pscr = in_be32(&pcmcia->pcmc_pscr);
+ pipr = in_be32(&pcmcia->pcmc_pipr);
+ per = in_be32(&pcmcia->pcmc_per);
for(i = 0; i < PCMCIA_SOCKETS_NO; i++) {
s = &socket[i];
@@ -724,7 +624,7 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
per &= ~M8XX_PCMCIA_RDY_L(0);
per &= ~M8XX_PCMCIA_RDY_L(1);
- out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per, per);
+ out_be32(&pcmcia->pcmc_per, per);
if (events)
pcmcia_parse_events(&socket[i].socket, events);
@@ -732,7 +632,7 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
}
/* clear the interrupt sources */
- out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr, pscr);
+ out_be32(&pcmcia->pcmc_pscr, pscr);
dprintk("Interrupt done.\n");
@@ -753,7 +653,7 @@ static u32 m8xx_get_graycode(u32 size)
return k;
}
-static u32 m8xx_get_speed(u32 ns, u32 is_io)
+static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq)
{
u32 reg, clocks, psst, psl, psht;
@@ -781,7 +681,7 @@ static u32 m8xx_get_speed(u32 ns, u32 is_io)
#define ADJ 180 /* 80 % longer accesstime - to be sure */
- clocks = ((M8XX_BUSFREQ / 1000) * ns) / 1000;
+ clocks = ((bus_freq / 1000) * ns) / 1000;
clocks = (clocks * ADJ) / (100*1000);
if(clocks >= PCMCIA_BMT_LIMIT) {
printk( "Max access time limit reached\n");
@@ -806,8 +706,9 @@ static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value)
int lsock = container_of(sock, struct socket_info, socket)->slot;
struct socket_info *s = &socket[lsock];
unsigned int pipr, reg;
+ pcmconf8xx_t *pcmcia = s->pcmcia;
- pipr = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pipr);
+ pipr = in_be32(&pcmcia->pcmc_pipr);
*value = ((pipr & (M8XX_PCMCIA_CD1(lsock)
| M8XX_PCMCIA_CD2(lsock))) == 0) ? SS_DETECT : 0;
@@ -918,6 +819,7 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
struct event_table *e;
unsigned int reg;
unsigned long flags;
+ pcmconf8xx_t *pcmcia = socket[0].pcmcia;
dprintk( "SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
"io_irq %d, csc_mask %#2.2x)\n", lsock, state->flags,
@@ -927,6 +829,7 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
if(voltage_set(lsock, state->Vcc, state->Vpp))
return -EINVAL;
+
/* Take care of reset... */
if(state->flags & SS_RESET)
out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXRESET); /* active high */
@@ -982,7 +885,8 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
* If io_irq is non-zero we should enable irq.
*/
if(state->io_irq) {
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | mk_int_int_mask(state->io_irq) << 24);
+ out_be32(M8XX_PGCRX(lsock),
+ in_be32(M8XX_PGCRX(lsock)) | mk_int_int_mask(s->hwirq) << 24);
/*
* Strange thing here:
* The manual does not tell us which interrupt
@@ -1027,7 +931,7 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
* Writing ones will clear the bits.
*/
- out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr, reg);
+ out_be32(&pcmcia->pcmc_pscr, reg);
/*
* Write the mask.
@@ -1036,15 +940,8 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
* Ones will enable the interrupt.
*/
- /*
- reg |= ((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per
- & M8XX_PCMCIA_MASK(lsock);
- */
-
- reg |= in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per) &
- (M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
-
- out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per, reg);
+ reg |= in_be32(&pcmcia->pcmc_per) & (M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
+ out_be32(&pcmcia->pcmc_per, reg);
spin_unlock_irqrestore(&events_lock, flags);
@@ -1062,6 +959,8 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
struct socket_info *s = &socket[lsock];
struct pcmcia_win *w;
unsigned int reg, winnr;
+ pcmconf8xx_t *pcmcia = s->pcmcia;
+
#define M8XX_SIZE (io->stop - io->start + 1)
#define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start)
@@ -1086,7 +985,7 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
/* setup registers */
- w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
+ w = (void *) &pcmcia->pcmc_pbr0;
w += winnr;
out_be32(&w->or, 0); /* turn off window first */
@@ -1095,12 +994,13 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
reg <<= 27;
reg |= M8XX_PCMCIA_POR_IO |(lsock << 2);
- reg |= m8xx_get_speed(io->speed, 1);
+ reg |= m8xx_get_speed(io->speed, 1, s->bus_freq);
if(io->flags & MAP_WRPROT)
reg |= M8XX_PCMCIA_POR_WRPROT;
- if(io->flags & (MAP_16BIT | MAP_AUTOSZ))
+ /*if(io->flags & (MAP_16BIT | MAP_AUTOSZ))*/
+ if(io->flags & MAP_16BIT)
reg |= M8XX_PCMCIA_POR_16BIT;
if(io->flags & MAP_ACTIVE)
@@ -1117,7 +1017,7 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
/* setup registers */
- w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
+ w = (void *) &pcmcia->pcmc_pbr0;
w += winnr;
out_be32(&w->or, 0); /* turn off window */
@@ -1144,6 +1044,7 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *m
struct pcmcia_win *w;
struct pccard_mem_map *old;
unsigned int reg, winnr;
+ pcmconf8xx_t *pcmcia = s->pcmcia;
dprintk( "SetMemMap(%d, %d, %#2.2x, %d ns, "
"%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
@@ -1166,12 +1067,12 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *m
/* Setup the window in the pcmcia controller */
- w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
+ w = (void *) &pcmcia->pcmc_pbr0;
w += winnr;
reg |= lsock << 2;
- reg |= m8xx_get_speed(mem->speed, 0);
+ reg |= m8xx_get_speed(mem->speed, 0, s->bus_freq);
if(mem->flags & MAP_ATTRIB)
reg |= M8XX_PCMCIA_POR_ATTRMEM;
@@ -1236,60 +1137,69 @@ static int m8xx_sock_init(struct pcmcia_socket *sock)
}
-static int m8xx_suspend(struct pcmcia_socket *sock)
+static int m8xx_sock_suspend(struct pcmcia_socket *sock)
{
return m8xx_set_socket(sock, &dead_socket);
}
static struct pccard_operations m8xx_services = {
.init = m8xx_sock_init,
- .suspend = m8xx_suspend,
+ .suspend = m8xx_sock_suspend,
.get_status = m8xx_get_status,
.set_socket = m8xx_set_socket,
.set_io_map = m8xx_set_io_map,
.set_mem_map = m8xx_set_mem_map,
};
-static int __init m8xx_init(void)
+static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id *match)
{
struct pcmcia_win *w;
- unsigned int i,m;
+ unsigned int i, m, hwirq;
+ pcmconf8xx_t *pcmcia;
+ int status;
+ struct device_node *np = ofdev->node;
pcmcia_info("%s\n", version);
- if (driver_register(&m8xx_driver))
- return -1;
+ pcmcia = of_iomap(np, 0);
+ if(pcmcia == NULL)
+ return -EINVAL;
+
+ pcmcia_schlvl = irq_of_parse_and_map(np, 0);
+ hwirq = irq_map[pcmcia_schlvl].hwirq;
+ if (pcmcia_schlvl < 0)
+ return -EINVAL;
+
+ m8xx_pgcrx[0] = &pcmcia->pcmc_pgcra;
+ m8xx_pgcrx[1] = &pcmcia->pcmc_pgcrb;
+
pcmcia_info(PCMCIA_BOARD_MSG " using " PCMCIA_SLOT_MSG
- " with IRQ %u.\n", pcmcia_schlvl);
+ " with IRQ %u (%d). \n", pcmcia_schlvl, hwirq);
/* Configure Status change interrupt */
- if(request_irq(pcmcia_schlvl, m8xx_interrupt, 0,
- "m8xx_pcmcia", NULL)) {
+ if(request_irq(pcmcia_schlvl, m8xx_interrupt, IRQF_SHARED,
+ driver_name, socket)) {
pcmcia_error("Cannot allocate IRQ %u for SCHLVL!\n",
pcmcia_schlvl);
return -1;
}
- w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
-
- out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr,
- M8XX_PCMCIA_MASK(0)| M8XX_PCMCIA_MASK(1));
+ w = (void *) &pcmcia->pcmc_pbr0;
- out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per,
- in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per) &
- ~(M8XX_PCMCIA_MASK(0)| M8XX_PCMCIA_MASK(1)));
+ out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(0)| M8XX_PCMCIA_MASK(1));
+ clrbits32(&pcmcia->pcmc_per, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
-/* connect interrupt and disable CxOE */
+ /* connect interrupt and disable CxOE */
- out_be32(M8XX_PGCRX(0), M8XX_PGCRX_CXOE | (mk_int_int_mask(pcmcia_schlvl) << 16));
- out_be32(M8XX_PGCRX(1), M8XX_PGCRX_CXOE | (mk_int_int_mask(pcmcia_schlvl) << 16));
+ out_be32(M8XX_PGCRX(0), M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
+ out_be32(M8XX_PGCRX(1), M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
-/* intialize the fixed memory windows */
+ /* intialize the fixed memory windows */
for(i = 0; i < PCMCIA_SOCKETS_NO; i++){
- for(m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
+ for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
out_be32(&w->br, PCMCIA_MEM_WIN_BASE +
(PCMCIA_MEM_WIN_SIZE
* (m + i * PCMCIA_MEM_WIN_NO)));
@@ -1300,16 +1210,14 @@ static int __init m8xx_init(void)
}
}
-/* turn off voltage */
+ /* turn off voltage */
voltage_set(0, 0, 0);
voltage_set(1, 0, 0);
-/* Enable external hardware */
+ /* Enable external hardware */
hardware_enable(0);
hardware_enable(1);
- platform_device_register(&m8xx_device);
-
for (i = 0 ; i < PCMCIA_SOCKETS_NO; i++) {
socket[i].slot = i;
socket[i].socket.owner = THIS_MODULE;
@@ -1317,30 +1225,105 @@ static int __init m8xx_init(void)
socket[i].socket.irq_mask = 0x000;
socket[i].socket.map_size = 0x1000;
socket[i].socket.io_offset = 0;
- socket[i].socket.pci_irq = i ? 7 : 9;
+ socket[i].socket.pci_irq = pcmcia_schlvl;
socket[i].socket.ops = &m8xx_services;
- socket[i].socket.resource_ops = &pccard_iodyn_ops;
+ socket[i].socket.resource_ops = &pccard_nonstatic_ops;
socket[i].socket.cb_dev = NULL;
- socket[i].socket.dev.parent = &m8xx_device.dev;
+ socket[i].socket.dev.parent = &ofdev->dev;
+ socket[i].pcmcia = pcmcia;
+ socket[i].bus_freq = ppc_proc_freq;
+ socket[i].hwirq = hwirq;
+
+
}
- for (i = 0; i < PCMCIA_SOCKETS_NO; i++)
- pcmcia_register_socket(&socket[i].socket);
+ for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
+ status = pcmcia_register_socket(&socket[i].socket);
+ if (status < 0)
+ pcmcia_error("Socket register failed\n");
+ }
return 0;
}
-static void __exit m8xx_exit(void)
+static int m8xx_remove(struct of_device* ofdev)
{
- int i;
+ u32 m, i;
+ struct pcmcia_win *w;
+ pcmconf8xx_t *pcmcia = socket[0].pcmcia;
+
+ for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
+ w = (void *) &pcmcia->pcmc_pbr0;
+
+ out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(i));
+ out_be32(&pcmcia->pcmc_per,
+ in_be32(&pcmcia->pcmc_per) & ~M8XX_PCMCIA_MASK(i));
+ /* turn off interrupt and disable CxOE */
+ out_be32(M8XX_PGCRX(i), M8XX_PGCRX_CXOE);
+
+ /* turn off memory windows */
+ for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
+ out_be32(&w->or, 0); /* set to not valid */
+ w++;
+ }
+
+ /* turn off voltage */
+ voltage_set(i, 0, 0);
+
+ /* disable external hardware */
+ hardware_disable(i);
+ }
for (i = 0; i < PCMCIA_SOCKETS_NO; i++)
pcmcia_unregister_socket(&socket[i].socket);
- m8xx_shutdown();
+ free_irq(pcmcia_schlvl, NULL);
- platform_device_unregister(&m8xx_device);
- driver_unregister(&m8xx_driver);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int m8xx_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ return pcmcia_socket_dev_suspend(&pdev->dev, state);
+}
+
+static int m8xx_resume(struct platform_device *pdev)
+{
+ return pcmcia_socket_dev_resume(&pdev->dev);
+}
+#else
+#define m8xx_suspend NULL
+#define m8xx_resume NULL
+#endif
+
+static struct of_device_id m8xx_pcmcia_match[] = {
+ {
+ .type = "pcmcia",
+ .compatible = "fsl,pq-pcmcia",
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, m8xx_pcmcia_match);
+
+static struct of_platform_driver m8xx_pcmcia_driver = {
+ .name = (char *) driver_name,
+ .match_table = m8xx_pcmcia_match,
+ .probe = m8xx_probe,
+ .remove = m8xx_remove,
+ .suspend = m8xx_suspend,
+ .resume = m8xx_resume,
+};
+
+static int __init m8xx_init(void)
+{
+ return of_register_platform_driver(&m8xx_pcmcia_driver);
+}
+
+static void __exit m8xx_exit(void)
+{
+ of_unregister_platform_driver(&m8xx_pcmcia_driver);
}
module_init(m8xx_init);
diff --git a/include/asm-powerpc/mpc8xx.h b/include/asm-powerpc/mpc8xx.h
index 5803711..c1a6efc 100644
--- a/include/asm-powerpc/mpc8xx.h
+++ b/include/asm-powerpc/mpc8xx.h
@@ -23,6 +23,10 @@
#include <platforms/8xx/mpc885ads.h>
#endif
+#ifdef CONFIG_PCMCIA_M8XX
+extern struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
+#endif
+
#endif /* CONFIG_8xx */
#endif /* __CONFIG_8xx_DEFS */
#endif /* __KERNEL__ */
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index 73710d6..12e631f 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -120,5 +120,10 @@ struct fsl_spi_platform_data {
u32 sysclk;
};
+struct mpc8xx_pcmcia_ops {
+ void(*hw_ctrl)(int slot, int enable);
+ int(*voltage_set)(int slot, int vcc, int vpp);
+};
+
#endif /* _FSL_DEVICE_H_ */
#endif /* __KERNEL__ */
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 1/2] [POWERPC] 8xx: mpc885ads pcmcia support
@ 2007-05-06 1:26 ` Vitaly Bordug
0 siblings, 0 replies; 10+ messages in thread
From: Vitaly Bordug @ 2007-05-06 1:26 UTC (permalink / raw)
To: linux-pcmcia; +Cc: linuxppc-dev, linux-kernel
Adds support for PowerQuicc on-chip PCMCIA. The driver is implemented as
of_device, so only arch/powerpc stuff is capable to use it, which now
implies only mpc885ads reference board.
To cope with the code that should be hooked inside driver, but is really
board specific (like set_voltage), global structure mpc8xx_pcmcia_ops
holds necessary function pointers that are filled in the BSP code.
Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
arch/powerpc/boot/dts/mpc885ads.dts | 12 +
arch/powerpc/platforms/8xx/m8xx_setup.c | 5
arch/powerpc/platforms/8xx/mpc885ads.h | 8 +
arch/powerpc/platforms/8xx/mpc885ads_setup.c | 76 ++++++
arch/powerpc/sysdev/fsl_soc.c | 13 +
arch/powerpc/sysdev/mpc8xx_pic.h | 2
drivers/pcmcia/Kconfig | 1
drivers/pcmcia/m8xx_pcmcia.c | 351 ++++++++++++--------------
include/asm-powerpc/mpc8xx.h | 4
include/linux/fsl_devices.h | 5
10 files changed, 292 insertions(+), 185 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index 110bf61..0f3e8cf 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -112,6 +112,18 @@
compatible = "CPM";
};
+ pcmcia@0080 {
+ linux,phandle = <0080>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ compatible = "fsl,pq-pcmcia";
+ device_type = "pcmcia";
+ reg = <80 80>;
+ clock-frequency = <2faf080>;
+ interrupt-parent = <ff000000>;
+ interrupts = <d 1>;
+ };
+
cpm@ff000000 {
linux,phandle = <ff000000>;
#address-cells = <1>;
diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
index 0901dba..f169355 100644
--- a/arch/powerpc/platforms/8xx/m8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -32,6 +32,7 @@
#include <linux/root_dev.h>
#include <linux/time.h>
#include <linux/rtc.h>
+#include <linux/fsl_devices.h>
#include <asm/mmu.h>
#include <asm/reg.h>
@@ -49,6 +50,10 @@
#include "sysdev/mpc8xx_pic.h"
+#ifdef CONFIG_PCMCIA_M8XX
+struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
+#endif
+
void m8xx_calibrate_decr(void);
extern void m8xx_wdt_handler_install(bd_t *bp);
extern int cpm_pic_init(void);
diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h
index 7c31aec..932b59a 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads.h
+++ b/arch/powerpc/platforms/8xx/mpc885ads.h
@@ -91,5 +91,13 @@
#define SICR_ENET_MASK ((uint)0x00ff0000)
#define SICR_ENET_CLKRT ((uint)0x002c0000)
+/*
+ * Some internal interrupt registers use an 8-bit mask for the interrupt
+ * level instead of a number.
+ */
+static inline uint mk_int_int_mask(uint mask) {
+ return (1 << (7 - (mask/2)));
+}
+
#endif /* __ASM_MPC885ADS_H__ */
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
index a57b577..4e76e1c 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
@@ -22,6 +22,7 @@
#include <linux/fs_enet_pd.h>
#include <linux/fs_uart_pd.h>
+#include <linux/fsl_devices.h>
#include <linux/mii.h>
#include <asm/delay.h>
@@ -51,6 +52,11 @@ static void init_smc1_uart_ioports(struct fs_uart_platform_info* fpi);
static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi);
static void init_scc3_ioports(struct fs_platform_info* ptr);
+#ifdef CONFIG_PCMCIA_M8XX
+static void pcmcia_hw_setup(int slot, int enable);
+static int pcmcia_set_voltage(int slot, int vcc, int vpp);
+#endif
+
void __init mpc885ads_board_setup(void)
{
cpm8xx_t *cp;
@@ -115,6 +121,12 @@ void __init mpc885ads_board_setup(void)
immr_unmap(io_port);
#endif
+
+#ifdef CONFIG_PCMCIA_M8XX
+ /*Set up board specific hook-ups*/
+ m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup;
+ m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage;
+#endif
}
@@ -322,6 +334,70 @@ void init_smc_ioports(struct fs_uart_platform_info *data)
}
}
+#ifdef CONFIG_PCMCIA_M8XX
+static void pcmcia_hw_setup(int slot, int enable)
+{
+ unsigned *bcsr_io;
+
+ bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+ if (enable)
+ clrbits32(bcsr_io, BCSR1_PCCEN);
+ else
+ setbits32(bcsr_io, BCSR1_PCCEN);
+
+ iounmap(bcsr_io);
+}
+
+static int pcmcia_set_voltage(int slot, int vcc, int vpp)
+{
+ u32 reg = 0;
+ unsigned *bcsr_io;
+
+ bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+
+ switch(vcc) {
+ case 0:
+ break;
+ case 33:
+ reg |= BCSR1_PCCVCC0;
+ break;
+ case 50:
+ reg |= BCSR1_PCCVCC1;
+ break;
+ default:
+ return 1;
+ }
+
+ switch(vpp) {
+ case 0:
+ break;
+ case 33:
+ case 50:
+ if(vcc == vpp)
+ reg |= BCSR1_PCCVPP1;
+ else
+ return 1;
+ break;
+ case 120:
+ if ((vcc == 33) || (vcc == 50))
+ reg |= BCSR1_PCCVPP0;
+ else
+ return 1;
+ default:
+ return 1;
+ }
+
+ /* first, turn off all power */
+ clrbits32(bcsr_io, 0x00610000);
+
+ /* enable new powersettings */
+ setbits32(bcsr_io, reg);
+
+ iounmap(bcsr_io);
+ return 0;
+}
+#endif
+
int platform_device_skip(const char *model, int id)
{
#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 8a123c7..880e45f 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -1028,6 +1028,19 @@ err:
arch_initcall(fs_enet_of_init);
+static int __init fsl_pcmcia_of_init(void)
+{
+ struct device_node *np = NULL;
+ /*
+ * Register all the devices which type is "pcmcia"
+ */
+ while ((np = of_find_compatible_node(np,
+ "pcmcia", "fsl,pq-pcmcia")) != NULL)
+ of_platform_device_create(np, "m8xx-pcmcia", NULL);
+ return 0;
+}
+
+arch_initcall(fsl_pcmcia_of_init);
static const char *smc_regs = "regs";
static const char *smc_pram = "pram";
diff --git a/arch/powerpc/sysdev/mpc8xx_pic.h b/arch/powerpc/sysdev/mpc8xx_pic.h
index afa2ee6..07be061 100644
--- a/arch/powerpc/sysdev/mpc8xx_pic.h
+++ b/arch/powerpc/sysdev/mpc8xx_pic.h
@@ -4,7 +4,7 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
-extern struct hw_interrupt_type mpc8xx_pic;
+/*extern struct hw_interrupt_type mpc8xx_pic;*/
int mpc8xx_pic_init(void);
unsigned int mpc8xx_get_irq(void);
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 35f8864..c3fd55d 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -183,6 +183,7 @@ config PCMCIA_M8XX
tristate "MPC8xx PCMCIA support"
depends on PCMCIA && PPC && 8xx
select PCCARD_IODYN
+ select PCCARD_NONSTATIC
help
Say Y here to include support for PowerPC 8xx series PCMCIA
controller.
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 9721ed7..40f6e20 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -10,7 +10,7 @@
* Further fixes, v2.6 kernel port
* <marcelo.tosatti@cyclades.com>
*
- * Some fixes, additions (C) 2005 Montavista Software, Inc.
+ * Some fixes, additions (C) 2005-2007 Montavista Software, Inc.
* <vbordug@ru.mvista.com>
*
* "The ExCA standard specifies that socket controllers should provide
@@ -40,10 +40,6 @@
#include <linux/fcntl.h>
#include <linux/string.h>
-#include <asm/io.h>
-#include <asm/bitops.h>
-#include <asm/system.h>
-
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
@@ -51,11 +47,18 @@
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+#include <asm/io.h>
+#include <asm/bitops.h>
+#include <asm/system.h>
+#include <asm/time.h>
#include <asm/mpc8xx.h>
#include <asm/8xx_immap.h>
#include <asm/irq.h>
+#include <asm/fs_pd.h>
+#include <asm/of_device.h>
+#include <asm/of_platform.h>
#include <pcmcia/version.h>
#include <pcmcia/cs_types.h>
@@ -146,27 +149,17 @@ MODULE_LICENSE("Dual MPL/GPL");
#define PCMCIA_MEM_WIN_BASE 0xe0000000 /* base address for memory window 0 */
#define PCMCIA_MEM_WIN_SIZE 0x04000000 /* each memory window is 64 MByte */
#define PCMCIA_IO_WIN_BASE _IO_BASE /* base address for io window 0 */
-
-#define PCMCIA_SCHLVL PCMCIA_INTERRUPT /* Status Change Interrupt Level */
-
/* ------------------------------------------------------------------------- */
-/* 2.4.x and newer has this always in HZ */
-#define M8XX_BUSFREQ ((((bd_t *)&(__res))->bi_busfreq))
-
-static int pcmcia_schlvl = PCMCIA_SCHLVL;
+static int pcmcia_schlvl;
static DEFINE_SPINLOCK(events_lock);
-
#define PCMCIA_SOCKET_KEY_5V 1
#define PCMCIA_SOCKET_KEY_LV 2
/* look up table for pgcrx registers */
-static u32 *m8xx_pgcrx[2] = {
- &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pgcra,
- &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pgcrb
-};
+static u32 *m8xx_pgcrx[2];
/*
* This structure is used to address each window in the PCMCIA controller.
@@ -228,11 +221,16 @@ struct event_table {
u32 eventbit;
};
+static const char driver_name[] = "m8xx-pcmcia";
+
struct socket_info {
void (*handler)(void *info, u32 events);
void *info;
u32 slot;
+ pcmconf8xx_t *pcmcia;
+ u32 bus_freq;
+ int hwirq;
socket_state_t state;
struct pccard_mem_map mem_win[PCMCIA_MEM_WIN_NO];
@@ -408,78 +406,21 @@ static void hardware_disable(int slot)
#if defined(CONFIG_MPC885ADS)
#define PCMCIA_BOARD_MSG "MPC885ADS"
+#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-static int voltage_set(int slot, int vcc, int vpp)
+static inline void hardware_enable(int slot)
{
- u32 reg = 0;
- unsigned *bcsr_io;
-
- bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
- switch(vcc) {
- case 0:
- break;
- case 33:
- reg |= BCSR1_PCCVCC0;
- break;
- case 50:
- reg |= BCSR1_PCCVCC1;
- break;
- default:
- goto out_unmap;
- }
-
- switch(vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if(vcc == vpp)
- reg |= BCSR1_PCCVPP1;
- else
- goto out_unmap;
- break;
- case 120:
- if ((vcc == 33) || (vcc == 50))
- reg |= BCSR1_PCCVPP0;
- else
- goto out_unmap;
- default:
- goto out_unmap;
- }
-
- /* first, turn off all power */
- out_be32(bcsr_io, in_be32(bcsr_io) & ~(BCSR1_PCCVCC_MASK | BCSR1_PCCVPP_MASK));
-
- /* enable new powersettings */
- out_be32(bcsr_io, in_be32(bcsr_io) | reg);
-
- iounmap(bcsr_io);
- return 0;
-
-out_unmap:
- iounmap(bcsr_io);
- return 1;
+ m8xx_pcmcia_ops.hw_ctrl(slot, 1);
}
-#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-
-static void hardware_enable(int slot)
+static inline void hardware_disable(int slot)
{
- unsigned *bcsr_io;
-
- bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
- out_be32(bcsr_io, in_be32(bcsr_io) & ~BCSR1_PCCEN);
- iounmap(bcsr_io);
+ m8xx_pcmcia_ops.hw_ctrl(slot, 0);
}
-static void hardware_disable(int slot)
+static inline int voltage_set(int slot, int vcc, int vpp)
{
- unsigned *bcsr_io;
-
- bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
- out_be32(bcsr_io, in_be32(bcsr_io) | BCSR1_PCCEN);
- iounmap(bcsr_io);
+ return m8xx_pcmcia_ops.voltage_set(slot, vcc, vpp);
}
#endif
@@ -604,48 +545,6 @@ static int voltage_set(int slot, int vcc, int vpp)
#endif /* CONFIG_PRxK */
-static void m8xx_shutdown(void)
-{
- u32 m, i;
- struct pcmcia_win *w;
-
- for(i = 0; i < PCMCIA_SOCKETS_NO; i++){
- w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
-
- out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr, M8XX_PCMCIA_MASK(i));
- out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per, in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per) & ~M8XX_PCMCIA_MASK(i));
-
- /* turn off interrupt and disable CxOE */
- out_be32(M8XX_PGCRX(i), M8XX_PGCRX_CXOE);
-
- /* turn off memory windows */
- for(m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
- out_be32(&w->or, 0); /* set to not valid */
- w++;
- }
-
- /* turn off voltage */
- voltage_set(i, 0, 0);
-
- /* disable external hardware */
- hardware_disable(i);
- }
-
- free_irq(pcmcia_schlvl, NULL);
-}
-
-static struct device_driver m8xx_driver = {
- .name = "m8xx-pcmcia",
- .bus = &platform_bus_type,
- .suspend = pcmcia_socket_dev_suspend,
- .resume = pcmcia_socket_dev_resume,
-};
-
-static struct platform_device m8xx_device = {
- .name = "m8xx-pcmcia",
- .id = 0,
-};
-
static u32 pending_events[PCMCIA_SOCKETS_NO];
static DEFINE_SPINLOCK(pending_event_lock);
@@ -654,13 +553,14 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
struct socket_info *s;
struct event_table *e;
unsigned int i, events, pscr, pipr, per;
+ pcmconf8xx_t *pcmcia = socket[0].pcmcia;
dprintk("Interrupt!\n");
/* get interrupt sources */
- pscr = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr);
- pipr = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pipr);
- per = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per);
+ pscr = in_be32(&pcmcia->pcmc_pscr);
+ pipr = in_be32(&pcmcia->pcmc_pipr);
+ per = in_be32(&pcmcia->pcmc_per);
for(i = 0; i < PCMCIA_SOCKETS_NO; i++) {
s = &socket[i];
@@ -724,7 +624,7 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
per &= ~M8XX_PCMCIA_RDY_L(0);
per &= ~M8XX_PCMCIA_RDY_L(1);
- out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per, per);
+ out_be32(&pcmcia->pcmc_per, per);
if (events)
pcmcia_parse_events(&socket[i].socket, events);
@@ -732,7 +632,7 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
}
/* clear the interrupt sources */
- out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr, pscr);
+ out_be32(&pcmcia->pcmc_pscr, pscr);
dprintk("Interrupt done.\n");
@@ -753,7 +653,7 @@ static u32 m8xx_get_graycode(u32 size)
return k;
}
-static u32 m8xx_get_speed(u32 ns, u32 is_io)
+static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq)
{
u32 reg, clocks, psst, psl, psht;
@@ -781,7 +681,7 @@ static u32 m8xx_get_speed(u32 ns, u32 is_io)
#define ADJ 180 /* 80 % longer accesstime - to be sure */
- clocks = ((M8XX_BUSFREQ / 1000) * ns) / 1000;
+ clocks = ((bus_freq / 1000) * ns) / 1000;
clocks = (clocks * ADJ) / (100*1000);
if(clocks >= PCMCIA_BMT_LIMIT) {
printk( "Max access time limit reached\n");
@@ -806,8 +706,9 @@ static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value)
int lsock = container_of(sock, struct socket_info, socket)->slot;
struct socket_info *s = &socket[lsock];
unsigned int pipr, reg;
+ pcmconf8xx_t *pcmcia = s->pcmcia;
- pipr = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pipr);
+ pipr = in_be32(&pcmcia->pcmc_pipr);
*value = ((pipr & (M8XX_PCMCIA_CD1(lsock)
| M8XX_PCMCIA_CD2(lsock))) == 0) ? SS_DETECT : 0;
@@ -918,6 +819,7 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
struct event_table *e;
unsigned int reg;
unsigned long flags;
+ pcmconf8xx_t *pcmcia = socket[0].pcmcia;
dprintk( "SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
"io_irq %d, csc_mask %#2.2x)\n", lsock, state->flags,
@@ -927,6 +829,7 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
if(voltage_set(lsock, state->Vcc, state->Vpp))
return -EINVAL;
+
/* Take care of reset... */
if(state->flags & SS_RESET)
out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXRESET); /* active high */
@@ -982,7 +885,8 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
* If io_irq is non-zero we should enable irq.
*/
if(state->io_irq) {
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | mk_int_int_mask(state->io_irq) << 24);
+ out_be32(M8XX_PGCRX(lsock),
+ in_be32(M8XX_PGCRX(lsock)) | mk_int_int_mask(s->hwirq) << 24);
/*
* Strange thing here:
* The manual does not tell us which interrupt
@@ -1027,7 +931,7 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
* Writing ones will clear the bits.
*/
- out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr, reg);
+ out_be32(&pcmcia->pcmc_pscr, reg);
/*
* Write the mask.
@@ -1036,15 +940,8 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
* Ones will enable the interrupt.
*/
- /*
- reg |= ((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per
- & M8XX_PCMCIA_MASK(lsock);
- */
-
- reg |= in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per) &
- (M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
-
- out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per, reg);
+ reg |= in_be32(&pcmcia->pcmc_per) & (M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
+ out_be32(&pcmcia->pcmc_per, reg);
spin_unlock_irqrestore(&events_lock, flags);
@@ -1062,6 +959,8 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
struct socket_info *s = &socket[lsock];
struct pcmcia_win *w;
unsigned int reg, winnr;
+ pcmconf8xx_t *pcmcia = s->pcmcia;
+
#define M8XX_SIZE (io->stop - io->start + 1)
#define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start)
@@ -1086,7 +985,7 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
/* setup registers */
- w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
+ w = (void *) &pcmcia->pcmc_pbr0;
w += winnr;
out_be32(&w->or, 0); /* turn off window first */
@@ -1095,12 +994,13 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
reg <<= 27;
reg |= M8XX_PCMCIA_POR_IO |(lsock << 2);
- reg |= m8xx_get_speed(io->speed, 1);
+ reg |= m8xx_get_speed(io->speed, 1, s->bus_freq);
if(io->flags & MAP_WRPROT)
reg |= M8XX_PCMCIA_POR_WRPROT;
- if(io->flags & (MAP_16BIT | MAP_AUTOSZ))
+ /*if(io->flags & (MAP_16BIT | MAP_AUTOSZ))*/
+ if(io->flags & MAP_16BIT)
reg |= M8XX_PCMCIA_POR_16BIT;
if(io->flags & MAP_ACTIVE)
@@ -1117,7 +1017,7 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
/* setup registers */
- w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
+ w = (void *) &pcmcia->pcmc_pbr0;
w += winnr;
out_be32(&w->or, 0); /* turn off window */
@@ -1144,6 +1044,7 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *m
struct pcmcia_win *w;
struct pccard_mem_map *old;
unsigned int reg, winnr;
+ pcmconf8xx_t *pcmcia = s->pcmcia;
dprintk( "SetMemMap(%d, %d, %#2.2x, %d ns, "
"%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
@@ -1166,12 +1067,12 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *m
/* Setup the window in the pcmcia controller */
- w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
+ w = (void *) &pcmcia->pcmc_pbr0;
w += winnr;
reg |= lsock << 2;
- reg |= m8xx_get_speed(mem->speed, 0);
+ reg |= m8xx_get_speed(mem->speed, 0, s->bus_freq);
if(mem->flags & MAP_ATTRIB)
reg |= M8XX_PCMCIA_POR_ATTRMEM;
@@ -1236,60 +1137,69 @@ static int m8xx_sock_init(struct pcmcia_socket *sock)
}
-static int m8xx_suspend(struct pcmcia_socket *sock)
+static int m8xx_sock_suspend(struct pcmcia_socket *sock)
{
return m8xx_set_socket(sock, &dead_socket);
}
static struct pccard_operations m8xx_services = {
.init = m8xx_sock_init,
- .suspend = m8xx_suspend,
+ .suspend = m8xx_sock_suspend,
.get_status = m8xx_get_status,
.set_socket = m8xx_set_socket,
.set_io_map = m8xx_set_io_map,
.set_mem_map = m8xx_set_mem_map,
};
-static int __init m8xx_init(void)
+static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id *match)
{
struct pcmcia_win *w;
- unsigned int i,m;
+ unsigned int i, m, hwirq;
+ pcmconf8xx_t *pcmcia;
+ int status;
+ struct device_node *np = ofdev->node;
pcmcia_info("%s\n", version);
- if (driver_register(&m8xx_driver))
- return -1;
+ pcmcia = of_iomap(np, 0);
+ if(pcmcia == NULL)
+ return -EINVAL;
+
+ pcmcia_schlvl = irq_of_parse_and_map(np, 0);
+ hwirq = irq_map[pcmcia_schlvl].hwirq;
+ if (pcmcia_schlvl < 0)
+ return -EINVAL;
+
+ m8xx_pgcrx[0] = &pcmcia->pcmc_pgcra;
+ m8xx_pgcrx[1] = &pcmcia->pcmc_pgcrb;
+
pcmcia_info(PCMCIA_BOARD_MSG " using " PCMCIA_SLOT_MSG
- " with IRQ %u.\n", pcmcia_schlvl);
+ " with IRQ %u (%d). \n", pcmcia_schlvl, hwirq);
/* Configure Status change interrupt */
- if(request_irq(pcmcia_schlvl, m8xx_interrupt, 0,
- "m8xx_pcmcia", NULL)) {
+ if(request_irq(pcmcia_schlvl, m8xx_interrupt, IRQF_SHARED,
+ driver_name, socket)) {
pcmcia_error("Cannot allocate IRQ %u for SCHLVL!\n",
pcmcia_schlvl);
return -1;
}
- w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
-
- out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr,
- M8XX_PCMCIA_MASK(0)| M8XX_PCMCIA_MASK(1));
+ w = (void *) &pcmcia->pcmc_pbr0;
- out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per,
- in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per) &
- ~(M8XX_PCMCIA_MASK(0)| M8XX_PCMCIA_MASK(1)));
+ out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(0)| M8XX_PCMCIA_MASK(1));
+ clrbits32(&pcmcia->pcmc_per, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
-/* connect interrupt and disable CxOE */
+ /* connect interrupt and disable CxOE */
- out_be32(M8XX_PGCRX(0), M8XX_PGCRX_CXOE | (mk_int_int_mask(pcmcia_schlvl) << 16));
- out_be32(M8XX_PGCRX(1), M8XX_PGCRX_CXOE | (mk_int_int_mask(pcmcia_schlvl) << 16));
+ out_be32(M8XX_PGCRX(0), M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
+ out_be32(M8XX_PGCRX(1), M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
-/* intialize the fixed memory windows */
+ /* intialize the fixed memory windows */
for(i = 0; i < PCMCIA_SOCKETS_NO; i++){
- for(m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
+ for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
out_be32(&w->br, PCMCIA_MEM_WIN_BASE +
(PCMCIA_MEM_WIN_SIZE
* (m + i * PCMCIA_MEM_WIN_NO)));
@@ -1300,16 +1210,14 @@ static int __init m8xx_init(void)
}
}
-/* turn off voltage */
+ /* turn off voltage */
voltage_set(0, 0, 0);
voltage_set(1, 0, 0);
-/* Enable external hardware */
+ /* Enable external hardware */
hardware_enable(0);
hardware_enable(1);
- platform_device_register(&m8xx_device);
-
for (i = 0 ; i < PCMCIA_SOCKETS_NO; i++) {
socket[i].slot = i;
socket[i].socket.owner = THIS_MODULE;
@@ -1317,30 +1225,105 @@ static int __init m8xx_init(void)
socket[i].socket.irq_mask = 0x000;
socket[i].socket.map_size = 0x1000;
socket[i].socket.io_offset = 0;
- socket[i].socket.pci_irq = i ? 7 : 9;
+ socket[i].socket.pci_irq = pcmcia_schlvl;
socket[i].socket.ops = &m8xx_services;
- socket[i].socket.resource_ops = &pccard_iodyn_ops;
+ socket[i].socket.resource_ops = &pccard_nonstatic_ops;
socket[i].socket.cb_dev = NULL;
- socket[i].socket.dev.parent = &m8xx_device.dev;
+ socket[i].socket.dev.parent = &ofdev->dev;
+ socket[i].pcmcia = pcmcia;
+ socket[i].bus_freq = ppc_proc_freq;
+ socket[i].hwirq = hwirq;
+
+
}
- for (i = 0; i < PCMCIA_SOCKETS_NO; i++)
- pcmcia_register_socket(&socket[i].socket);
+ for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
+ status = pcmcia_register_socket(&socket[i].socket);
+ if (status < 0)
+ pcmcia_error("Socket register failed\n");
+ }
return 0;
}
-static void __exit m8xx_exit(void)
+static int m8xx_remove(struct of_device* ofdev)
{
- int i;
+ u32 m, i;
+ struct pcmcia_win *w;
+ pcmconf8xx_t *pcmcia = socket[0].pcmcia;
+
+ for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
+ w = (void *) &pcmcia->pcmc_pbr0;
+
+ out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(i));
+ out_be32(&pcmcia->pcmc_per,
+ in_be32(&pcmcia->pcmc_per) & ~M8XX_PCMCIA_MASK(i));
+ /* turn off interrupt and disable CxOE */
+ out_be32(M8XX_PGCRX(i), M8XX_PGCRX_CXOE);
+
+ /* turn off memory windows */
+ for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
+ out_be32(&w->or, 0); /* set to not valid */
+ w++;
+ }
+
+ /* turn off voltage */
+ voltage_set(i, 0, 0);
+
+ /* disable external hardware */
+ hardware_disable(i);
+ }
for (i = 0; i < PCMCIA_SOCKETS_NO; i++)
pcmcia_unregister_socket(&socket[i].socket);
- m8xx_shutdown();
+ free_irq(pcmcia_schlvl, NULL);
- platform_device_unregister(&m8xx_device);
- driver_unregister(&m8xx_driver);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int m8xx_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ return pcmcia_socket_dev_suspend(&pdev->dev, state);
+}
+
+static int m8xx_resume(struct platform_device *pdev)
+{
+ return pcmcia_socket_dev_resume(&pdev->dev);
+}
+#else
+#define m8xx_suspend NULL
+#define m8xx_resume NULL
+#endif
+
+static struct of_device_id m8xx_pcmcia_match[] = {
+ {
+ .type = "pcmcia",
+ .compatible = "fsl,pq-pcmcia",
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, m8xx_pcmcia_match);
+
+static struct of_platform_driver m8xx_pcmcia_driver = {
+ .name = (char *) driver_name,
+ .match_table = m8xx_pcmcia_match,
+ .probe = m8xx_probe,
+ .remove = m8xx_remove,
+ .suspend = m8xx_suspend,
+ .resume = m8xx_resume,
+};
+
+static int __init m8xx_init(void)
+{
+ return of_register_platform_driver(&m8xx_pcmcia_driver);
+}
+
+static void __exit m8xx_exit(void)
+{
+ of_unregister_platform_driver(&m8xx_pcmcia_driver);
}
module_init(m8xx_init);
diff --git a/include/asm-powerpc/mpc8xx.h b/include/asm-powerpc/mpc8xx.h
index 5803711..c1a6efc 100644
--- a/include/asm-powerpc/mpc8xx.h
+++ b/include/asm-powerpc/mpc8xx.h
@@ -23,6 +23,10 @@
#include <platforms/8xx/mpc885ads.h>
#endif
+#ifdef CONFIG_PCMCIA_M8XX
+extern struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
+#endif
+
#endif /* CONFIG_8xx */
#endif /* __CONFIG_8xx_DEFS */
#endif /* __KERNEL__ */
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index 73710d6..12e631f 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -120,5 +120,10 @@ struct fsl_spi_platform_data {
u32 sysclk;
};
+struct mpc8xx_pcmcia_ops {
+ void(*hw_ctrl)(int slot, int enable);
+ int(*voltage_set)(int slot, int vcc, int vpp);
+};
+
#endif /* _FSL_DEVICE_H_ */
#endif /* __KERNEL__ */
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] [POWERPC] 8xx: fix whitespace and indentation
2007-05-06 1:26 ` Vitaly Bordug
@ 2007-05-06 1:26 ` Vitaly Bordug
-1 siblings, 0 replies; 10+ messages in thread
From: Vitaly Bordug @ 2007-05-06 1:26 UTC (permalink / raw)
To: linux-pcmcia; +Cc: linuxppc-dev, linux-kernel, linuxppc-dev
Rolling forward PCMCIA driver, it was discovered that the indentation
in existing one is very odd. This patch is just result of Lindent run ontop
of culprit files.
Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
---
drivers/pcmcia/m8xx_pcmcia.c | 548 +++++++++++++++++++++---------------------
1 files changed, 278 insertions(+), 270 deletions(-)
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 40f6e20..79e14ab 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -113,7 +113,7 @@ MODULE_LICENSE("Dual MPL/GPL");
#define CONFIG_PCMCIA_SLOT_B
#endif
-#endif /* !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) */
+#endif /* !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) */
#if defined(CONFIG_PCMCIA_SLOT_A) && defined(CONFIG_PCMCIA_SLOT_B)
@@ -146,9 +146,9 @@ MODULE_LICENSE("Dual MPL/GPL");
/* ------------------------------------------------------------------------- */
-#define PCMCIA_MEM_WIN_BASE 0xe0000000 /* base address for memory window 0 */
-#define PCMCIA_MEM_WIN_SIZE 0x04000000 /* each memory window is 64 MByte */
-#define PCMCIA_IO_WIN_BASE _IO_BASE /* base address for io window 0 */
+#define PCMCIA_MEM_WIN_BASE 0xe0000000 /* base address for memory window 0 */
+#define PCMCIA_MEM_WIN_SIZE 0x04000000 /* each memory window is 64 MByte */
+#define PCMCIA_IO_WIN_BASE _IO_BASE /* base address for io window 0 */
/* ------------------------------------------------------------------------- */
static int pcmcia_schlvl;
@@ -169,8 +169,8 @@ static u32 *m8xx_pgcrx[2];
*/
struct pcmcia_win {
- u32 br;
- u32 or;
+ u32 br;
+ u32 or;
};
/*
@@ -214,7 +214,7 @@ struct pcmcia_win {
/* we keep one lookup table per socket to check flags */
-#define PCMCIA_EVENTS_MAX 5 /* 4 max at a time + termination */
+#define PCMCIA_EVENTS_MAX 5 /* 4 max at a time + termination */
struct event_table {
u32 regbit;
@@ -224,8 +224,8 @@ struct event_table {
static const char driver_name[] = "m8xx-pcmcia";
struct socket_info {
- void (*handler)(void *info, u32 events);
- void *info;
+ void (*handler) (void *info, u32 events);
+ void *info;
u32 slot;
pcmconf8xx_t *pcmcia;
@@ -234,7 +234,7 @@ struct socket_info {
socket_state_t state;
struct pccard_mem_map mem_win[PCMCIA_MEM_WIN_NO];
- struct pccard_io_map io_win[PCMCIA_IO_WIN_NO];
+ struct pccard_io_map io_win[PCMCIA_IO_WIN_NO];
struct event_table events[PCMCIA_EVENTS_MAX];
struct pcmcia_socket socket;
};
@@ -248,8 +248,7 @@ static struct socket_info socket[PCMCIA_SOCKETS_NO];
#define M8XX_SIZES_NO 32
-static const u32 m8xx_size_to_gray[M8XX_SIZES_NO] =
-{
+static const u32 m8xx_size_to_gray[M8XX_SIZES_NO] = {
0x00000001, 0x00000002, 0x00000008, 0x00000004,
0x00000080, 0x00000040, 0x00000010, 0x00000020,
0x00008000, 0x00004000, 0x00001000, 0x00002000,
@@ -265,7 +264,7 @@ static const u32 m8xx_size_to_gray[M8XX_SIZES_NO] =
static irqreturn_t m8xx_interrupt(int irq, void *dev);
-#define PCMCIA_BMT_LIMIT (15*4) /* Bus Monitor Timeout value */
+#define PCMCIA_BMT_LIMIT (15*4) /* Bus Monitor Timeout value */
/* ------------------------------------------------------------------------- */
/* board specific stuff: */
@@ -289,8 +288,9 @@ static int voltage_set(int slot, int vcc, int vpp)
{
u32 reg = 0;
- switch(vcc) {
- case 0: break;
+ switch (vcc) {
+ case 0:
+ break;
case 33:
reg |= BCSR1_PCVCTL4;
break;
@@ -301,11 +301,12 @@ static int voltage_set(int slot, int vcc, int vpp)
return 1;
}
- switch(vpp) {
- case 0: break;
+ switch (vpp) {
+ case 0:
+ break;
case 33:
case 50:
- if(vcc == vpp)
+ if (vcc == vpp)
reg |= BCSR1_PCVCTL6;
else
return 1;
@@ -316,25 +317,29 @@ static int voltage_set(int slot, int vcc, int vpp)
return 1;
}
- if(!((vcc == 50) || (vcc == 0)))
+ if (!((vcc == 50) || (vcc == 0)))
return 1;
/* first, turn off all power */
- out_be32(((u32 *)RPX_CSR_ADDR), in_be32(((u32 *)RPX_CSR_ADDR)) & ~(BCSR1_PCVCTL4 | BCSR1_PCVCTL5 | BCSR1_PCVCTL6 | BCSR1_PCVCTL7));
+ out_be32(((u32 *) RPX_CSR_ADDR),
+ in_be32(((u32 *) RPX_CSR_ADDR)) & ~(BCSR1_PCVCTL4 |
+ BCSR1_PCVCTL5 |
+ BCSR1_PCVCTL6 |
+ BCSR1_PCVCTL7));
/* enable new powersettings */
- out_be32(((u32 *)RPX_CSR_ADDR), in_be32(((u32 *)RPX_CSR_ADDR)) | reg);
+ out_be32(((u32 *) RPX_CSR_ADDR), in_be32(((u32 *) RPX_CSR_ADDR)) | reg);
return 0;
}
#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-#define hardware_enable(_slot_) /* No hardware to enable */
-#define hardware_disable(_slot_) /* No hardware to disable */
+#define hardware_enable(_slot_) /* No hardware to enable */
+#define hardware_disable(_slot_) /* No hardware to disable */
-#endif /* CONFIG_RPXCLASSIC */
+#endif /* CONFIG_RPXCLASSIC */
/* FADS Boards from Motorola */
@@ -346,43 +351,45 @@ static int voltage_set(int slot, int vcc, int vpp)
{
u32 reg = 0;
- switch(vcc) {
- case 0:
- break;
- case 33:
- reg |= BCSR1_PCCVCC0;
- break;
- case 50:
- reg |= BCSR1_PCCVCC1;
- break;
- default:
- return 1;
+ switch (vcc) {
+ case 0:
+ break;
+ case 33:
+ reg |= BCSR1_PCCVCC0;
+ break;
+ case 50:
+ reg |= BCSR1_PCCVCC1;
+ break;
+ default:
+ return 1;
}
- switch(vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if(vcc == vpp)
- reg |= BCSR1_PCCVPP1;
- else
- return 1;
- break;
- case 120:
- if ((vcc == 33) || (vcc == 50))
- reg |= BCSR1_PCCVPP0;
- else
- return 1;
- default:
+ switch (vpp) {
+ case 0:
+ break;
+ case 33:
+ case 50:
+ if (vcc == vpp)
+ reg |= BCSR1_PCCVPP1;
+ else
return 1;
+ break;
+ case 120:
+ if ((vcc == 33) || (vcc == 50))
+ reg |= BCSR1_PCCVPP0;
+ else
+ return 1;
+ default:
+ return 1;
}
/* first, turn off all power */
- out_be32((u32 *)BCSR1, in_be32((u32 *)BCSR1) & ~(BCSR1_PCCVCC_MASK | BCSR1_PCCVPP_MASK));
+ out_be32((u32 *) BCSR1,
+ in_be32((u32 *) BCSR1) & ~(BCSR1_PCCVCC_MASK |
+ BCSR1_PCCVPP_MASK));
/* enable new powersettings */
- out_be32((u32 *)BCSR1, in_be32((u32 *)BCSR1) | reg);
+ out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) | reg);
return 0;
}
@@ -391,12 +398,12 @@ static int voltage_set(int slot, int vcc, int vpp)
static void hardware_enable(int slot)
{
- out_be32((u32 *)BCSR1, in_be32((u32 *)BCSR1) & ~BCSR1_PCCEN);
+ out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) & ~BCSR1_PCCEN);
}
static void hardware_disable(int slot)
{
- out_be32((u32 *)BCSR1, in_be32((u32 *)BCSR1) | BCSR1_PCCEN);
+ out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) | BCSR1_PCCEN);
}
#endif
@@ -410,7 +417,7 @@ static void hardware_disable(int slot)
static inline void hardware_enable(int slot)
{
- m8xx_pcmcia_ops.hw_ctrl(slot, 1);
+ m8xx_pcmcia_ops.hw_ctrl(slot, 1);
}
static inline void hardware_disable(int slot)
@@ -436,52 +443,53 @@ static int voltage_set(int slot, int vcc, int vpp)
{
u8 reg = 0;
- switch(vcc) {
- case 0:
- break;
- case 33:
- reg |= CSR2_VCC_33;
- break;
- case 50:
- reg |= CSR2_VCC_50;
- break;
- default:
- return 1;
+ switch (vcc) {
+ case 0:
+ break;
+ case 33:
+ reg |= CSR2_VCC_33;
+ break;
+ case 50:
+ reg |= CSR2_VCC_50;
+ break;
+ default:
+ return 1;
}
- switch(vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if(vcc == vpp)
- reg |= CSR2_VPP_VCC;
- else
- return 1;
- break;
- case 120:
- if ((vcc == 33) || (vcc == 50))
- reg |= CSR2_VPP_12;
- else
- return 1;
- default:
+ switch (vpp) {
+ case 0:
+ break;
+ case 33:
+ case 50:
+ if (vcc == vpp)
+ reg |= CSR2_VPP_VCC;
+ else
+ return 1;
+ break;
+ case 120:
+ if ((vcc == 33) || (vcc == 50))
+ reg |= CSR2_VPP_12;
+ else
return 1;
+ default:
+ return 1;
}
/* first, turn off all power */
- out_8((u8 *)MBX_CSR2_ADDR, in_8((u8 *)MBX_CSR2_ADDR) & ~(CSR2_VCC_MASK | CSR2_VPP_MASK));
+ out_8((u8 *) MBX_CSR2_ADDR,
+ in_8((u8 *) MBX_CSR2_ADDR) & ~(CSR2_VCC_MASK | CSR2_VPP_MASK));
/* enable new powersettings */
- out_8((u8 *)MBX_CSR2_ADDR, in_8((u8 *)MBX_CSR2_ADDR) | reg);
+ out_8((u8 *) MBX_CSR2_ADDR, in_8((u8 *) MBX_CSR2_ADDR) | reg);
return 0;
}
#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-#define hardware_enable(_slot_) /* No hardware to enable */
-#define hardware_disable(_slot_) /* No hardware to disable */
+#define hardware_enable(_slot_) /* No hardware to enable */
+#define hardware_disable(_slot_) /* No hardware to disable */
-#endif /* CONFIG_MBX */
+#endif /* CONFIG_MBX */
#if defined(CONFIG_PRxK)
#include <asm/cpld.h>
@@ -495,43 +503,46 @@ static int voltage_set(int slot, int vcc, int vpp)
u8 regread;
cpld_regs *ccpld = get_cpld();
- switch(vcc) {
- case 0:
- break;
- case 33:
- reg |= PCMCIA_VCC_33;
- break;
- case 50:
- reg |= PCMCIA_VCC_50;
- break;
- default:
- return 1;
+ switch (vcc) {
+ case 0:
+ break;
+ case 33:
+ reg |= PCMCIA_VCC_33;
+ break;
+ case 50:
+ reg |= PCMCIA_VCC_50;
+ break;
+ default:
+ return 1;
}
- switch(vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if(vcc == vpp)
- reg |= PCMCIA_VPP_VCC;
- else
- return 1;
- break;
- case 120:
- if ((vcc == 33) || (vcc == 50))
- reg |= PCMCIA_VPP_12;
- else
- return 1;
- default:
+ switch (vpp) {
+ case 0:
+ break;
+ case 33:
+ case 50:
+ if (vcc == vpp)
+ reg |= PCMCIA_VPP_VCC;
+ else
return 1;
+ break;
+ case 120:
+ if ((vcc == 33) || (vcc == 50))
+ reg |= PCMCIA_VPP_12;
+ else
+ return 1;
+ default:
+ return 1;
}
reg = reg >> (slot << 2);
regread = in_8(&ccpld->fpga_pc_ctl);
- if (reg != (regread & ((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2)))) {
+ if (reg !=
+ (regread & ((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2)))) {
/* enable new powersettings */
- regread = regread & ~((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2));
+ regread =
+ regread & ~((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >>
+ (slot << 2));
out_8(&ccpld->fpga_pc_ctl, reg | regread);
msleep(100);
}
@@ -540,10 +551,10 @@ static int voltage_set(int slot, int vcc, int vpp)
}
#define socket_get(_slot_) PCMCIA_SOCKET_KEY_LV
-#define hardware_enable(_slot_) /* No hardware to enable */
-#define hardware_disable(_slot_) /* No hardware to disable */
+#define hardware_enable(_slot_) /* No hardware to enable */
+#define hardware_disable(_slot_) /* No hardware to disable */
-#endif /* CONFIG_PRxK */
+#endif /* CONFIG_PRxK */
static u32 pending_events[PCMCIA_SOCKETS_NO];
static DEFINE_SPINLOCK(pending_event_lock);
@@ -553,7 +564,7 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
struct socket_info *s;
struct event_table *e;
unsigned int i, events, pscr, pipr, per;
- pcmconf8xx_t *pcmcia = socket[0].pcmcia;
+ pcmconf8xx_t *pcmcia = socket[0].pcmcia;
dprintk("Interrupt!\n");
/* get interrupt sources */
@@ -562,16 +573,16 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
pipr = in_be32(&pcmcia->pcmc_pipr);
per = in_be32(&pcmcia->pcmc_per);
- for(i = 0; i < PCMCIA_SOCKETS_NO; i++) {
+ for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
s = &socket[i];
e = &s->events[0];
events = 0;
- while(e->regbit) {
- if(pscr & e->regbit)
+ while (e->regbit) {
+ if (pscr & e->regbit)
events |= e->eventbit;
- e++;
+ e++;
}
/*
@@ -579,13 +590,11 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
* not too nice done,
* we depend on that CD2 is the bit to the left of CD1...
*/
- if(events & SS_DETECT)
- if(((pipr & M8XX_PCMCIA_CD2(i)) >> 1) ^
- (pipr & M8XX_PCMCIA_CD1(i)))
- {
+ if (events & SS_DETECT)
+ if (((pipr & M8XX_PCMCIA_CD2(i)) >> 1) ^
+ (pipr & M8XX_PCMCIA_CD1(i))) {
events &= ~SS_DETECT;
}
-
#ifdef PCMCIA_GLITCHY_CD
/*
* I've experienced CD problems with my ADS board.
@@ -593,24 +602,23 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
* real change of Card detection.
*/
- if((events & SS_DETECT) &&
- ((pipr &
- (M8XX_PCMCIA_CD2(i) | M8XX_PCMCIA_CD1(i))) == 0) &&
- (s->state.Vcc | s->state.Vpp)) {
+ if ((events & SS_DETECT) &&
+ ((pipr &
+ (M8XX_PCMCIA_CD2(i) | M8XX_PCMCIA_CD1(i))) == 0) &&
+ (s->state.Vcc | s->state.Vpp)) {
events &= ~SS_DETECT;
/*printk( "CD glitch workaround - CD = 0x%08x!\n",
- (pipr & (M8XX_PCMCIA_CD2(i)
- | M8XX_PCMCIA_CD1(i))));*/
+ (pipr & (M8XX_PCMCIA_CD2(i)
+ | M8XX_PCMCIA_CD1(i)))); */
}
#endif
/* call the handler */
dprintk("slot %u: events = 0x%02x, pscr = 0x%08x, "
- "pipr = 0x%08x\n",
- i, events, pscr, pipr);
+ "pipr = 0x%08x\n", i, events, pscr, pipr);
- if(events) {
+ if (events) {
spin_lock(&pending_event_lock);
pending_events[i] |= events;
spin_unlock(&pending_event_lock);
@@ -643,11 +651,11 @@ static u32 m8xx_get_graycode(u32 size)
{
u32 k;
- for(k = 0; k < M8XX_SIZES_NO; k++)
- if(m8xx_size_to_gray[k] == size)
+ for (k = 0; k < M8XX_SIZES_NO; k++)
+ if (m8xx_size_to_gray[k] == size)
break;
- if((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1))
+ if ((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1))
k = -1;
return k;
@@ -657,7 +665,7 @@ static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq)
{
u32 reg, clocks, psst, psl, psht;
- if(!ns) {
+ if (!ns) {
/*
* We get called with IO maps setup to 0ns
@@ -665,10 +673,10 @@ static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq)
* They should be 255ns.
*/
- if(is_io)
+ if (is_io)
ns = 255;
else
- ns = 100; /* fast memory if 0 */
+ ns = 100; /* fast memory if 0 */
}
/*
@@ -679,23 +687,23 @@ static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq)
/* how we want to adjust the timing - in percent */
-#define ADJ 180 /* 80 % longer accesstime - to be sure */
+#define ADJ 180 /* 80 % longer accesstime - to be sure */
clocks = ((bus_freq / 1000) * ns) / 1000;
- clocks = (clocks * ADJ) / (100*1000);
- if(clocks >= PCMCIA_BMT_LIMIT) {
- printk( "Max access time limit reached\n");
- clocks = PCMCIA_BMT_LIMIT-1;
+ clocks = (clocks * ADJ) / (100 * 1000);
+ if (clocks >= PCMCIA_BMT_LIMIT) {
+ printk("Max access time limit reached\n");
+ clocks = PCMCIA_BMT_LIMIT - 1;
}
- psst = clocks / 7; /* setup time */
- psht = clocks / 7; /* hold time */
- psl = (clocks * 5) / 7; /* strobe length */
+ psst = clocks / 7; /* setup time */
+ psht = clocks / 7; /* hold time */
+ psl = (clocks * 5) / 7; /* strobe length */
psst += clocks - (psst + psht + psl);
- reg = psst << 12;
- reg |= psl << 7;
+ reg = psst << 12;
+ reg |= psl << 7;
reg |= psht << 16;
return reg;
@@ -710,8 +718,8 @@ static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value)
pipr = in_be32(&pcmcia->pcmc_pipr);
- *value = ((pipr & (M8XX_PCMCIA_CD1(lsock)
- | M8XX_PCMCIA_CD2(lsock))) == 0) ? SS_DETECT : 0;
+ *value = ((pipr & (M8XX_PCMCIA_CD1(lsock)
+ | M8XX_PCMCIA_CD2(lsock))) == 0) ? SS_DETECT : 0;
*value |= (pipr & M8XX_PCMCIA_WP(lsock)) ? SS_WRPROT : 0;
if (s->state.flags & SS_IOCARD)
@@ -795,16 +803,16 @@ static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value)
/* read out VS1 and VS2 */
reg = (pipr & M8XX_PCMCIA_VS_MASK(lsock))
- >> M8XX_PCMCIA_VS_SHIFT(lsock);
+ >> M8XX_PCMCIA_VS_SHIFT(lsock);
- if(socket_get(lsock) == PCMCIA_SOCKET_KEY_LV) {
- switch(reg) {
+ if (socket_get(lsock) == PCMCIA_SOCKET_KEY_LV) {
+ switch (reg) {
case 1:
*value |= SS_3VCARD;
- break; /* GND, NC - 3.3V only */
+ break; /* GND, NC - 3.3V only */
case 2:
*value |= SS_XVCARD;
- break; /* NC. GND - x.xV only */
+ break; /* NC. GND - x.xV only */
};
}
@@ -812,7 +820,7 @@ static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value)
return 0;
}
-static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
+static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t * state)
{
int lsock = container_of(sock, struct socket_info, socket)->slot;
struct socket_info *s = &socket[lsock];
@@ -821,20 +829,20 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
unsigned long flags;
pcmconf8xx_t *pcmcia = socket[0].pcmcia;
- dprintk( "SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
- "io_irq %d, csc_mask %#2.2x)\n", lsock, state->flags,
- state->Vcc, state->Vpp, state->io_irq, state->csc_mask);
+ dprintk("SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
+ "io_irq %d, csc_mask %#2.2x)\n", lsock, state->flags,
+ state->Vcc, state->Vpp, state->io_irq, state->csc_mask);
/* First, set voltage - bail out if invalid */
- if(voltage_set(lsock, state->Vcc, state->Vpp))
+ if (voltage_set(lsock, state->Vcc, state->Vpp))
return -EINVAL;
-
/* Take care of reset... */
- if(state->flags & SS_RESET)
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXRESET); /* active high */
+ if (state->flags & SS_RESET)
+ out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXRESET); /* active high */
else
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXRESET);
+ out_be32(M8XX_PGCRX(lsock),
+ in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXRESET);
/* ... and output enable. */
@@ -846,10 +854,11 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
no pullups are present -> the cards act wierd.
So right now the buffers are enabled if the power is on. */
- if(state->Vcc || state->Vpp)
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXOE); /* active low */
+ if (state->Vcc || state->Vpp)
+ out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXOE); /* active low */
else
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXOE);
+ out_be32(M8XX_PGCRX(lsock),
+ in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXOE);
/*
* We'd better turn off interrupts before
@@ -866,17 +875,17 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
e = &s->events[0];
reg = 0;
- if(state->csc_mask & SS_DETECT) {
+ if (state->csc_mask & SS_DETECT) {
e->eventbit = SS_DETECT;
reg |= e->regbit = (M8XX_PCMCIA_CD2(lsock)
| M8XX_PCMCIA_CD1(lsock));
e++;
}
- if(state->flags & SS_IOCARD) {
+ if (state->flags & SS_IOCARD) {
/*
* I/O card
*/
- if(state->csc_mask & SS_STSCHG) {
+ if (state->csc_mask & SS_STSCHG) {
e->eventbit = SS_STSCHG;
reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock);
e++;
@@ -884,9 +893,10 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
/*
* If io_irq is non-zero we should enable irq.
*/
- if(state->io_irq) {
+ if (state->io_irq) {
out_be32(M8XX_PGCRX(lsock),
- in_be32(M8XX_PGCRX(lsock)) | mk_int_int_mask(s->hwirq) << 24);
+ in_be32(M8XX_PGCRX(lsock)) |
+ mk_int_int_mask(s->hwirq) << 24);
/*
* Strange thing here:
* The manual does not tell us which interrupt
@@ -897,33 +907,32 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
* have to be cleared in PSCR in the interrupt handler.
*/
reg |= M8XX_PCMCIA_RDY_L(lsock);
- }
- else
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & 0x00ffffff);
- }
- else {
+ } else
+ out_be32(M8XX_PGCRX(lsock),
+ in_be32(M8XX_PGCRX(lsock)) & 0x00ffffff);
+ } else {
/*
* Memory card
*/
- if(state->csc_mask & SS_BATDEAD) {
+ if (state->csc_mask & SS_BATDEAD) {
e->eventbit = SS_BATDEAD;
reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock);
e++;
}
- if(state->csc_mask & SS_BATWARN) {
+ if (state->csc_mask & SS_BATWARN) {
e->eventbit = SS_BATWARN;
reg |= e->regbit = M8XX_PCMCIA_BVD2(lsock);
e++;
}
/* What should I trigger on - low/high,raise,fall? */
- if(state->csc_mask & SS_READY) {
+ if (state->csc_mask & SS_READY) {
e->eventbit = SS_READY;
- reg |= e->regbit = 0; //??
+ reg |= e->regbit = 0; //??
e++;
}
}
- e->regbit = 0; /* terminate list */
+ e->regbit = 0; /* terminate list */
/*
* Clear the status changed .
@@ -940,7 +949,9 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
* Ones will enable the interrupt.
*/
- reg |= in_be32(&pcmcia->pcmc_per) & (M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
+ reg |=
+ in_be32(&pcmcia->
+ pcmc_per) & (M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
out_be32(&pcmcia->pcmc_per, reg);
spin_unlock_irqrestore(&events_lock, flags);
@@ -961,67 +972,66 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
unsigned int reg, winnr;
pcmconf8xx_t *pcmcia = s->pcmcia;
-
#define M8XX_SIZE (io->stop - io->start + 1)
#define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start)
- dprintk( "SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#4.4x-%#4.4x)\n", lsock, io->map, io->flags,
- io->speed, io->start, io->stop);
+ dprintk("SetIOMap(%d, %d, %#2.2x, %d ns, "
+ "%#4.4x-%#4.4x)\n", lsock, io->map, io->flags,
+ io->speed, io->start, io->stop);
if ((io->map >= PCMCIA_IO_WIN_NO) || (io->start > 0xffff)
|| (io->stop > 0xffff) || (io->stop < io->start))
return -EINVAL;
- if((reg = m8xx_get_graycode(M8XX_SIZE)) == -1)
+ if ((reg = m8xx_get_graycode(M8XX_SIZE)) == -1)
return -EINVAL;
- if(io->flags & MAP_ACTIVE) {
+ if (io->flags & MAP_ACTIVE) {
- dprintk( "io->flags & MAP_ACTIVE\n");
+ dprintk("io->flags & MAP_ACTIVE\n");
winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO)
- + (lsock * PCMCIA_IO_WIN_NO) + io->map;
+ + (lsock * PCMCIA_IO_WIN_NO) + io->map;
/* setup registers */
- w = (void *) &pcmcia->pcmc_pbr0;
+ w = (void *)&pcmcia->pcmc_pbr0;
w += winnr;
- out_be32(&w->or, 0); /* turn off window first */
+ out_be32(&w->or, 0); /* turn off window first */
out_be32(&w->br, M8XX_BASE);
reg <<= 27;
- reg |= M8XX_PCMCIA_POR_IO |(lsock << 2);
+ reg |= M8XX_PCMCIA_POR_IO | (lsock << 2);
reg |= m8xx_get_speed(io->speed, 1, s->bus_freq);
- if(io->flags & MAP_WRPROT)
+ if (io->flags & MAP_WRPROT)
reg |= M8XX_PCMCIA_POR_WRPROT;
- /*if(io->flags & (MAP_16BIT | MAP_AUTOSZ))*/
- if(io->flags & MAP_16BIT)
+ /*if(io->flags & (MAP_16BIT | MAP_AUTOSZ)) */
+ if (io->flags & MAP_16BIT)
reg |= M8XX_PCMCIA_POR_16BIT;
- if(io->flags & MAP_ACTIVE)
+ if (io->flags & MAP_ACTIVE)
reg |= M8XX_PCMCIA_POR_VALID;
out_be32(&w->or, reg);
dprintk("Socket %u: Mapped io window %u at %#8.8x, "
- "OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
+ "OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
} else {
/* shutdown IO window */
winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO)
- + (lsock * PCMCIA_IO_WIN_NO) + io->map;
+ + (lsock * PCMCIA_IO_WIN_NO) + io->map;
/* setup registers */
- w = (void *) &pcmcia->pcmc_pbr0;
+ w = (void *)&pcmcia->pcmc_pbr0;
w += winnr;
- out_be32(&w->or, 0); /* turn off window */
- out_be32(&w->br, 0); /* turn off base address */
+ out_be32(&w->or, 0); /* turn off window */
+ out_be32(&w->br, 0); /* turn off base address */
dprintk("Socket %u: Unmapped io window %u at %#8.8x, "
"OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
@@ -1029,15 +1039,14 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
/* copy the struct and modify the copy */
s->io_win[io->map] = *io;
- s->io_win[io->map].flags &= (MAP_WRPROT
- | MAP_16BIT
- | MAP_ACTIVE);
+ s->io_win[io->map].flags &= (MAP_WRPROT | MAP_16BIT | MAP_ACTIVE);
dprintk("SetIOMap exit\n");
return 0;
}
-static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *mem)
+static int m8xx_set_mem_map(struct pcmcia_socket *sock,
+ struct pccard_mem_map *mem)
{
int lsock = container_of(sock, struct socket_info, socket)->slot;
struct socket_info *s = &socket[lsock];
@@ -1046,19 +1055,19 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *m
unsigned int reg, winnr;
pcmconf8xx_t *pcmcia = s->pcmcia;
- dprintk( "SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
- mem->speed, mem->static_start, mem->card_start);
+ dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, "
+ "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
+ mem->speed, mem->static_start, mem->card_start);
if ((mem->map >= PCMCIA_MEM_WIN_NO)
-// || ((mem->s) >= PCMCIA_MEM_WIN_SIZE)
+// || ((mem->s) >= PCMCIA_MEM_WIN_SIZE)
|| (mem->card_start >= 0x04000000)
- || (mem->static_start & 0xfff) /* 4KByte resolution */
- || (mem->card_start & 0xfff))
+ || (mem->static_start & 0xfff) /* 4KByte resolution */
+ ||(mem->card_start & 0xfff))
return -EINVAL;
- if((reg = m8xx_get_graycode(PCMCIA_MEM_WIN_SIZE)) == -1) {
- printk( "Cannot set size to 0x%08x.\n", PCMCIA_MEM_WIN_SIZE);
+ if ((reg = m8xx_get_graycode(PCMCIA_MEM_WIN_SIZE)) == -1) {
+ printk("Cannot set size to 0x%08x.\n", PCMCIA_MEM_WIN_SIZE);
return -EINVAL;
}
reg <<= 27;
@@ -1067,50 +1076,47 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *m
/* Setup the window in the pcmcia controller */
- w = (void *) &pcmcia->pcmc_pbr0;
+ w = (void *)&pcmcia->pcmc_pbr0;
w += winnr;
reg |= lsock << 2;
reg |= m8xx_get_speed(mem->speed, 0, s->bus_freq);
- if(mem->flags & MAP_ATTRIB)
- reg |= M8XX_PCMCIA_POR_ATTRMEM;
+ if (mem->flags & MAP_ATTRIB)
+ reg |= M8XX_PCMCIA_POR_ATTRMEM;
- if(mem->flags & MAP_WRPROT)
+ if (mem->flags & MAP_WRPROT)
reg |= M8XX_PCMCIA_POR_WRPROT;
- if(mem->flags & MAP_16BIT)
+ if (mem->flags & MAP_16BIT)
reg |= M8XX_PCMCIA_POR_16BIT;
- if(mem->flags & MAP_ACTIVE)
+ if (mem->flags & MAP_ACTIVE)
reg |= M8XX_PCMCIA_POR_VALID;
out_be32(&w->or, reg);
dprintk("Socket %u: Mapped memory window %u at %#8.8x, "
- "OR = %#8.8x.\n", lsock, mem->map, w->br, w->or);
+ "OR = %#8.8x.\n", lsock, mem->map, w->br, w->or);
- if(mem->flags & MAP_ACTIVE) {
+ if (mem->flags & MAP_ACTIVE) {
/* get the new base address */
mem->static_start = PCMCIA_MEM_WIN_BASE +
- (PCMCIA_MEM_WIN_SIZE * winnr)
- + mem->card_start;
+ (PCMCIA_MEM_WIN_SIZE * winnr)
+ + mem->card_start;
}
dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
- mem->speed, mem->static_start, mem->card_start);
+ "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
+ mem->speed, mem->static_start, mem->card_start);
/* copy the struct and modify the copy */
old = &s->mem_win[mem->map];
*old = *mem;
- old->flags &= (MAP_ATTRIB
- | MAP_WRPROT
- | MAP_16BIT
- | MAP_ACTIVE);
+ old->flags &= (MAP_ATTRIB | MAP_WRPROT | MAP_16BIT | MAP_ACTIVE);
return 0;
}
@@ -1121,7 +1127,7 @@ static int m8xx_sock_init(struct pcmcia_socket *sock)
pccard_io_map io = { 0, 0, 0, 0, 1 };
pccard_mem_map mem = { 0, 0, 0, 0, 0, 0 };
- dprintk( "sock_init(%d)\n", s);
+ dprintk("sock_init(%d)\n", s);
m8xx_set_socket(sock, &dead_socket);
for (i = 0; i < PCMCIA_IO_WIN_NO; i++) {
@@ -1143,7 +1149,7 @@ static int m8xx_sock_suspend(struct pcmcia_socket *sock)
}
static struct pccard_operations m8xx_services = {
- .init = m8xx_sock_init,
+ .init = m8xx_sock_init,
.suspend = m8xx_sock_suspend,
.get_status = m8xx_get_status,
.set_socket = m8xx_set_socket,
@@ -1151,7 +1157,8 @@ static struct pccard_operations m8xx_services = {
.set_mem_map = m8xx_set_mem_map,
};
-static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id *match)
+static int __init m8xx_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
{
struct pcmcia_win *w;
unsigned int i, m, hwirq;
@@ -1162,49 +1169,50 @@ static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id
pcmcia_info("%s\n", version);
pcmcia = of_iomap(np, 0);
- if(pcmcia == NULL)
+ if (pcmcia == NULL)
return -EINVAL;
pcmcia_schlvl = irq_of_parse_and_map(np, 0);
- hwirq = irq_map[pcmcia_schlvl].hwirq;
+ hwirq = irq_map[pcmcia_schlvl].hwirq;
if (pcmcia_schlvl < 0)
return -EINVAL;
m8xx_pgcrx[0] = &pcmcia->pcmc_pgcra;
m8xx_pgcrx[1] = &pcmcia->pcmc_pgcrb;
-
pcmcia_info(PCMCIA_BOARD_MSG " using " PCMCIA_SLOT_MSG
" with IRQ %u (%d). \n", pcmcia_schlvl, hwirq);
/* Configure Status change interrupt */
- if(request_irq(pcmcia_schlvl, m8xx_interrupt, IRQF_SHARED,
- driver_name, socket)) {
+ if (request_irq(pcmcia_schlvl, m8xx_interrupt, IRQF_SHARED,
+ driver_name, socket)) {
pcmcia_error("Cannot allocate IRQ %u for SCHLVL!\n",
pcmcia_schlvl);
return -1;
}
- w = (void *) &pcmcia->pcmc_pbr0;
+ w = (void *)&pcmcia->pcmc_pbr0;
- out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(0)| M8XX_PCMCIA_MASK(1));
+ out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
clrbits32(&pcmcia->pcmc_per, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
/* connect interrupt and disable CxOE */
- out_be32(M8XX_PGCRX(0), M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
- out_be32(M8XX_PGCRX(1), M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
+ out_be32(M8XX_PGCRX(0),
+ M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
+ out_be32(M8XX_PGCRX(1),
+ M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
/* intialize the fixed memory windows */
- for(i = 0; i < PCMCIA_SOCKETS_NO; i++){
+ for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
out_be32(&w->br, PCMCIA_MEM_WIN_BASE +
- (PCMCIA_MEM_WIN_SIZE
- * (m + i * PCMCIA_MEM_WIN_NO)));
+ (PCMCIA_MEM_WIN_SIZE
+ * (m + i * PCMCIA_MEM_WIN_NO)));
- out_be32(&w->or, 0); /* set to not valid */
+ out_be32(&w->or, 0); /* set to not valid */
w++;
}
@@ -1218,10 +1226,11 @@ static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id
hardware_enable(0);
hardware_enable(1);
- for (i = 0 ; i < PCMCIA_SOCKETS_NO; i++) {
+ for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
socket[i].slot = i;
socket[i].socket.owner = THIS_MODULE;
- socket[i].socket.features = SS_CAP_PCCARD | SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP;
+ socket[i].socket.features =
+ SS_CAP_PCCARD | SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP;
socket[i].socket.irq_mask = 0x000;
socket[i].socket.map_size = 0x1000;
socket[i].socket.io_offset = 0;
@@ -1234,7 +1243,6 @@ static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id
socket[i].bus_freq = ppc_proc_freq;
socket[i].hwirq = hwirq;
-
}
for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
@@ -1246,25 +1254,25 @@ static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id
return 0;
}
-static int m8xx_remove(struct of_device* ofdev)
+static int m8xx_remove(struct of_device *ofdev)
{
u32 m, i;
struct pcmcia_win *w;
pcmconf8xx_t *pcmcia = socket[0].pcmcia;
for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
- w = (void *) &pcmcia->pcmc_pbr0;
+ w = (void *)&pcmcia->pcmc_pbr0;
out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(i));
out_be32(&pcmcia->pcmc_per,
- in_be32(&pcmcia->pcmc_per) & ~M8XX_PCMCIA_MASK(i));
+ in_be32(&pcmcia->pcmc_per) & ~M8XX_PCMCIA_MASK(i));
/* turn off interrupt and disable CxOE */
out_be32(M8XX_PGCRX(i), M8XX_PGCRX_CXOE);
/* turn off memory windows */
for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
- out_be32(&w->or, 0); /* set to not valid */
+ out_be32(&w->or, 0); /* set to not valid */
w++;
}
@@ -1299,21 +1307,21 @@ static int m8xx_resume(struct platform_device *pdev)
static struct of_device_id m8xx_pcmcia_match[] = {
{
- .type = "pcmcia",
- .compatible = "fsl,pq-pcmcia",
- },
+ .type = "pcmcia",
+ .compatible = "fsl,pq-pcmcia",
+ },
{},
};
MODULE_DEVICE_TABLE(of, m8xx_pcmcia_match);
static struct of_platform_driver m8xx_pcmcia_driver = {
- .name = (char *) driver_name,
- .match_table = m8xx_pcmcia_match,
- .probe = m8xx_probe,
- .remove = m8xx_remove,
- .suspend = m8xx_suspend,
- .resume = m8xx_resume,
+ .name = (char *)driver_name,
+ .match_table = m8xx_pcmcia_match,
+ .probe = m8xx_probe,
+ .remove = m8xx_remove,
+ .suspend = m8xx_suspend,
+ .resume = m8xx_resume,
};
static int __init m8xx_init(void)
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] [POWERPC] 8xx: fix whitespace and indentation
@ 2007-05-06 1:26 ` Vitaly Bordug
0 siblings, 0 replies; 10+ messages in thread
From: Vitaly Bordug @ 2007-05-06 1:26 UTC (permalink / raw)
To: linux-pcmcia; +Cc: linuxppc-dev, linux-kernel
Rolling forward PCMCIA driver, it was discovered that the indentation
in existing one is very odd. This patch is just result of Lindent run ontop
of culprit files.
Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
---
drivers/pcmcia/m8xx_pcmcia.c | 548 +++++++++++++++++++++---------------------
1 files changed, 278 insertions(+), 270 deletions(-)
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 40f6e20..79e14ab 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -113,7 +113,7 @@ MODULE_LICENSE("Dual MPL/GPL");
#define CONFIG_PCMCIA_SLOT_B
#endif
-#endif /* !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) */
+#endif /* !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) */
#if defined(CONFIG_PCMCIA_SLOT_A) && defined(CONFIG_PCMCIA_SLOT_B)
@@ -146,9 +146,9 @@ MODULE_LICENSE("Dual MPL/GPL");
/* ------------------------------------------------------------------------- */
-#define PCMCIA_MEM_WIN_BASE 0xe0000000 /* base address for memory window 0 */
-#define PCMCIA_MEM_WIN_SIZE 0x04000000 /* each memory window is 64 MByte */
-#define PCMCIA_IO_WIN_BASE _IO_BASE /* base address for io window 0 */
+#define PCMCIA_MEM_WIN_BASE 0xe0000000 /* base address for memory window 0 */
+#define PCMCIA_MEM_WIN_SIZE 0x04000000 /* each memory window is 64 MByte */
+#define PCMCIA_IO_WIN_BASE _IO_BASE /* base address for io window 0 */
/* ------------------------------------------------------------------------- */
static int pcmcia_schlvl;
@@ -169,8 +169,8 @@ static u32 *m8xx_pgcrx[2];
*/
struct pcmcia_win {
- u32 br;
- u32 or;
+ u32 br;
+ u32 or;
};
/*
@@ -214,7 +214,7 @@ struct pcmcia_win {
/* we keep one lookup table per socket to check flags */
-#define PCMCIA_EVENTS_MAX 5 /* 4 max at a time + termination */
+#define PCMCIA_EVENTS_MAX 5 /* 4 max at a time + termination */
struct event_table {
u32 regbit;
@@ -224,8 +224,8 @@ struct event_table {
static const char driver_name[] = "m8xx-pcmcia";
struct socket_info {
- void (*handler)(void *info, u32 events);
- void *info;
+ void (*handler) (void *info, u32 events);
+ void *info;
u32 slot;
pcmconf8xx_t *pcmcia;
@@ -234,7 +234,7 @@ struct socket_info {
socket_state_t state;
struct pccard_mem_map mem_win[PCMCIA_MEM_WIN_NO];
- struct pccard_io_map io_win[PCMCIA_IO_WIN_NO];
+ struct pccard_io_map io_win[PCMCIA_IO_WIN_NO];
struct event_table events[PCMCIA_EVENTS_MAX];
struct pcmcia_socket socket;
};
@@ -248,8 +248,7 @@ static struct socket_info socket[PCMCIA_SOCKETS_NO];
#define M8XX_SIZES_NO 32
-static const u32 m8xx_size_to_gray[M8XX_SIZES_NO] =
-{
+static const u32 m8xx_size_to_gray[M8XX_SIZES_NO] = {
0x00000001, 0x00000002, 0x00000008, 0x00000004,
0x00000080, 0x00000040, 0x00000010, 0x00000020,
0x00008000, 0x00004000, 0x00001000, 0x00002000,
@@ -265,7 +264,7 @@ static const u32 m8xx_size_to_gray[M8XX_SIZES_NO] =
static irqreturn_t m8xx_interrupt(int irq, void *dev);
-#define PCMCIA_BMT_LIMIT (15*4) /* Bus Monitor Timeout value */
+#define PCMCIA_BMT_LIMIT (15*4) /* Bus Monitor Timeout value */
/* ------------------------------------------------------------------------- */
/* board specific stuff: */
@@ -289,8 +288,9 @@ static int voltage_set(int slot, int vcc, int vpp)
{
u32 reg = 0;
- switch(vcc) {
- case 0: break;
+ switch (vcc) {
+ case 0:
+ break;
case 33:
reg |= BCSR1_PCVCTL4;
break;
@@ -301,11 +301,12 @@ static int voltage_set(int slot, int vcc, int vpp)
return 1;
}
- switch(vpp) {
- case 0: break;
+ switch (vpp) {
+ case 0:
+ break;
case 33:
case 50:
- if(vcc == vpp)
+ if (vcc == vpp)
reg |= BCSR1_PCVCTL6;
else
return 1;
@@ -316,25 +317,29 @@ static int voltage_set(int slot, int vcc, int vpp)
return 1;
}
- if(!((vcc == 50) || (vcc == 0)))
+ if (!((vcc == 50) || (vcc == 0)))
return 1;
/* first, turn off all power */
- out_be32(((u32 *)RPX_CSR_ADDR), in_be32(((u32 *)RPX_CSR_ADDR)) & ~(BCSR1_PCVCTL4 | BCSR1_PCVCTL5 | BCSR1_PCVCTL6 | BCSR1_PCVCTL7));
+ out_be32(((u32 *) RPX_CSR_ADDR),
+ in_be32(((u32 *) RPX_CSR_ADDR)) & ~(BCSR1_PCVCTL4 |
+ BCSR1_PCVCTL5 |
+ BCSR1_PCVCTL6 |
+ BCSR1_PCVCTL7));
/* enable new powersettings */
- out_be32(((u32 *)RPX_CSR_ADDR), in_be32(((u32 *)RPX_CSR_ADDR)) | reg);
+ out_be32(((u32 *) RPX_CSR_ADDR), in_be32(((u32 *) RPX_CSR_ADDR)) | reg);
return 0;
}
#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-#define hardware_enable(_slot_) /* No hardware to enable */
-#define hardware_disable(_slot_) /* No hardware to disable */
+#define hardware_enable(_slot_) /* No hardware to enable */
+#define hardware_disable(_slot_) /* No hardware to disable */
-#endif /* CONFIG_RPXCLASSIC */
+#endif /* CONFIG_RPXCLASSIC */
/* FADS Boards from Motorola */
@@ -346,43 +351,45 @@ static int voltage_set(int slot, int vcc, int vpp)
{
u32 reg = 0;
- switch(vcc) {
- case 0:
- break;
- case 33:
- reg |= BCSR1_PCCVCC0;
- break;
- case 50:
- reg |= BCSR1_PCCVCC1;
- break;
- default:
- return 1;
+ switch (vcc) {
+ case 0:
+ break;
+ case 33:
+ reg |= BCSR1_PCCVCC0;
+ break;
+ case 50:
+ reg |= BCSR1_PCCVCC1;
+ break;
+ default:
+ return 1;
}
- switch(vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if(vcc == vpp)
- reg |= BCSR1_PCCVPP1;
- else
- return 1;
- break;
- case 120:
- if ((vcc == 33) || (vcc == 50))
- reg |= BCSR1_PCCVPP0;
- else
- return 1;
- default:
+ switch (vpp) {
+ case 0:
+ break;
+ case 33:
+ case 50:
+ if (vcc == vpp)
+ reg |= BCSR1_PCCVPP1;
+ else
return 1;
+ break;
+ case 120:
+ if ((vcc == 33) || (vcc == 50))
+ reg |= BCSR1_PCCVPP0;
+ else
+ return 1;
+ default:
+ return 1;
}
/* first, turn off all power */
- out_be32((u32 *)BCSR1, in_be32((u32 *)BCSR1) & ~(BCSR1_PCCVCC_MASK | BCSR1_PCCVPP_MASK));
+ out_be32((u32 *) BCSR1,
+ in_be32((u32 *) BCSR1) & ~(BCSR1_PCCVCC_MASK |
+ BCSR1_PCCVPP_MASK));
/* enable new powersettings */
- out_be32((u32 *)BCSR1, in_be32((u32 *)BCSR1) | reg);
+ out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) | reg);
return 0;
}
@@ -391,12 +398,12 @@ static int voltage_set(int slot, int vcc, int vpp)
static void hardware_enable(int slot)
{
- out_be32((u32 *)BCSR1, in_be32((u32 *)BCSR1) & ~BCSR1_PCCEN);
+ out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) & ~BCSR1_PCCEN);
}
static void hardware_disable(int slot)
{
- out_be32((u32 *)BCSR1, in_be32((u32 *)BCSR1) | BCSR1_PCCEN);
+ out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) | BCSR1_PCCEN);
}
#endif
@@ -410,7 +417,7 @@ static void hardware_disable(int slot)
static inline void hardware_enable(int slot)
{
- m8xx_pcmcia_ops.hw_ctrl(slot, 1);
+ m8xx_pcmcia_ops.hw_ctrl(slot, 1);
}
static inline void hardware_disable(int slot)
@@ -436,52 +443,53 @@ static int voltage_set(int slot, int vcc, int vpp)
{
u8 reg = 0;
- switch(vcc) {
- case 0:
- break;
- case 33:
- reg |= CSR2_VCC_33;
- break;
- case 50:
- reg |= CSR2_VCC_50;
- break;
- default:
- return 1;
+ switch (vcc) {
+ case 0:
+ break;
+ case 33:
+ reg |= CSR2_VCC_33;
+ break;
+ case 50:
+ reg |= CSR2_VCC_50;
+ break;
+ default:
+ return 1;
}
- switch(vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if(vcc == vpp)
- reg |= CSR2_VPP_VCC;
- else
- return 1;
- break;
- case 120:
- if ((vcc == 33) || (vcc == 50))
- reg |= CSR2_VPP_12;
- else
- return 1;
- default:
+ switch (vpp) {
+ case 0:
+ break;
+ case 33:
+ case 50:
+ if (vcc == vpp)
+ reg |= CSR2_VPP_VCC;
+ else
+ return 1;
+ break;
+ case 120:
+ if ((vcc == 33) || (vcc == 50))
+ reg |= CSR2_VPP_12;
+ else
return 1;
+ default:
+ return 1;
}
/* first, turn off all power */
- out_8((u8 *)MBX_CSR2_ADDR, in_8((u8 *)MBX_CSR2_ADDR) & ~(CSR2_VCC_MASK | CSR2_VPP_MASK));
+ out_8((u8 *) MBX_CSR2_ADDR,
+ in_8((u8 *) MBX_CSR2_ADDR) & ~(CSR2_VCC_MASK | CSR2_VPP_MASK));
/* enable new powersettings */
- out_8((u8 *)MBX_CSR2_ADDR, in_8((u8 *)MBX_CSR2_ADDR) | reg);
+ out_8((u8 *) MBX_CSR2_ADDR, in_8((u8 *) MBX_CSR2_ADDR) | reg);
return 0;
}
#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-#define hardware_enable(_slot_) /* No hardware to enable */
-#define hardware_disable(_slot_) /* No hardware to disable */
+#define hardware_enable(_slot_) /* No hardware to enable */
+#define hardware_disable(_slot_) /* No hardware to disable */
-#endif /* CONFIG_MBX */
+#endif /* CONFIG_MBX */
#if defined(CONFIG_PRxK)
#include <asm/cpld.h>
@@ -495,43 +503,46 @@ static int voltage_set(int slot, int vcc, int vpp)
u8 regread;
cpld_regs *ccpld = get_cpld();
- switch(vcc) {
- case 0:
- break;
- case 33:
- reg |= PCMCIA_VCC_33;
- break;
- case 50:
- reg |= PCMCIA_VCC_50;
- break;
- default:
- return 1;
+ switch (vcc) {
+ case 0:
+ break;
+ case 33:
+ reg |= PCMCIA_VCC_33;
+ break;
+ case 50:
+ reg |= PCMCIA_VCC_50;
+ break;
+ default:
+ return 1;
}
- switch(vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if(vcc == vpp)
- reg |= PCMCIA_VPP_VCC;
- else
- return 1;
- break;
- case 120:
- if ((vcc == 33) || (vcc == 50))
- reg |= PCMCIA_VPP_12;
- else
- return 1;
- default:
+ switch (vpp) {
+ case 0:
+ break;
+ case 33:
+ case 50:
+ if (vcc == vpp)
+ reg |= PCMCIA_VPP_VCC;
+ else
return 1;
+ break;
+ case 120:
+ if ((vcc == 33) || (vcc == 50))
+ reg |= PCMCIA_VPP_12;
+ else
+ return 1;
+ default:
+ return 1;
}
reg = reg >> (slot << 2);
regread = in_8(&ccpld->fpga_pc_ctl);
- if (reg != (regread & ((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2)))) {
+ if (reg !=
+ (regread & ((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2)))) {
/* enable new powersettings */
- regread = regread & ~((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2));
+ regread =
+ regread & ~((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >>
+ (slot << 2));
out_8(&ccpld->fpga_pc_ctl, reg | regread);
msleep(100);
}
@@ -540,10 +551,10 @@ static int voltage_set(int slot, int vcc, int vpp)
}
#define socket_get(_slot_) PCMCIA_SOCKET_KEY_LV
-#define hardware_enable(_slot_) /* No hardware to enable */
-#define hardware_disable(_slot_) /* No hardware to disable */
+#define hardware_enable(_slot_) /* No hardware to enable */
+#define hardware_disable(_slot_) /* No hardware to disable */
-#endif /* CONFIG_PRxK */
+#endif /* CONFIG_PRxK */
static u32 pending_events[PCMCIA_SOCKETS_NO];
static DEFINE_SPINLOCK(pending_event_lock);
@@ -553,7 +564,7 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
struct socket_info *s;
struct event_table *e;
unsigned int i, events, pscr, pipr, per;
- pcmconf8xx_t *pcmcia = socket[0].pcmcia;
+ pcmconf8xx_t *pcmcia = socket[0].pcmcia;
dprintk("Interrupt!\n");
/* get interrupt sources */
@@ -562,16 +573,16 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
pipr = in_be32(&pcmcia->pcmc_pipr);
per = in_be32(&pcmcia->pcmc_per);
- for(i = 0; i < PCMCIA_SOCKETS_NO; i++) {
+ for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
s = &socket[i];
e = &s->events[0];
events = 0;
- while(e->regbit) {
- if(pscr & e->regbit)
+ while (e->regbit) {
+ if (pscr & e->regbit)
events |= e->eventbit;
- e++;
+ e++;
}
/*
@@ -579,13 +590,11 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
* not too nice done,
* we depend on that CD2 is the bit to the left of CD1...
*/
- if(events & SS_DETECT)
- if(((pipr & M8XX_PCMCIA_CD2(i)) >> 1) ^
- (pipr & M8XX_PCMCIA_CD1(i)))
- {
+ if (events & SS_DETECT)
+ if (((pipr & M8XX_PCMCIA_CD2(i)) >> 1) ^
+ (pipr & M8XX_PCMCIA_CD1(i))) {
events &= ~SS_DETECT;
}
-
#ifdef PCMCIA_GLITCHY_CD
/*
* I've experienced CD problems with my ADS board.
@@ -593,24 +602,23 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
* real change of Card detection.
*/
- if((events & SS_DETECT) &&
- ((pipr &
- (M8XX_PCMCIA_CD2(i) | M8XX_PCMCIA_CD1(i))) == 0) &&
- (s->state.Vcc | s->state.Vpp)) {
+ if ((events & SS_DETECT) &&
+ ((pipr &
+ (M8XX_PCMCIA_CD2(i) | M8XX_PCMCIA_CD1(i))) == 0) &&
+ (s->state.Vcc | s->state.Vpp)) {
events &= ~SS_DETECT;
/*printk( "CD glitch workaround - CD = 0x%08x!\n",
- (pipr & (M8XX_PCMCIA_CD2(i)
- | M8XX_PCMCIA_CD1(i))));*/
+ (pipr & (M8XX_PCMCIA_CD2(i)
+ | M8XX_PCMCIA_CD1(i)))); */
}
#endif
/* call the handler */
dprintk("slot %u: events = 0x%02x, pscr = 0x%08x, "
- "pipr = 0x%08x\n",
- i, events, pscr, pipr);
+ "pipr = 0x%08x\n", i, events, pscr, pipr);
- if(events) {
+ if (events) {
spin_lock(&pending_event_lock);
pending_events[i] |= events;
spin_unlock(&pending_event_lock);
@@ -643,11 +651,11 @@ static u32 m8xx_get_graycode(u32 size)
{
u32 k;
- for(k = 0; k < M8XX_SIZES_NO; k++)
- if(m8xx_size_to_gray[k] == size)
+ for (k = 0; k < M8XX_SIZES_NO; k++)
+ if (m8xx_size_to_gray[k] == size)
break;
- if((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1))
+ if ((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1))
k = -1;
return k;
@@ -657,7 +665,7 @@ static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq)
{
u32 reg, clocks, psst, psl, psht;
- if(!ns) {
+ if (!ns) {
/*
* We get called with IO maps setup to 0ns
@@ -665,10 +673,10 @@ static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq)
* They should be 255ns.
*/
- if(is_io)
+ if (is_io)
ns = 255;
else
- ns = 100; /* fast memory if 0 */
+ ns = 100; /* fast memory if 0 */
}
/*
@@ -679,23 +687,23 @@ static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq)
/* how we want to adjust the timing - in percent */
-#define ADJ 180 /* 80 % longer accesstime - to be sure */
+#define ADJ 180 /* 80 % longer accesstime - to be sure */
clocks = ((bus_freq / 1000) * ns) / 1000;
- clocks = (clocks * ADJ) / (100*1000);
- if(clocks >= PCMCIA_BMT_LIMIT) {
- printk( "Max access time limit reached\n");
- clocks = PCMCIA_BMT_LIMIT-1;
+ clocks = (clocks * ADJ) / (100 * 1000);
+ if (clocks >= PCMCIA_BMT_LIMIT) {
+ printk("Max access time limit reached\n");
+ clocks = PCMCIA_BMT_LIMIT - 1;
}
- psst = clocks / 7; /* setup time */
- psht = clocks / 7; /* hold time */
- psl = (clocks * 5) / 7; /* strobe length */
+ psst = clocks / 7; /* setup time */
+ psht = clocks / 7; /* hold time */
+ psl = (clocks * 5) / 7; /* strobe length */
psst += clocks - (psst + psht + psl);
- reg = psst << 12;
- reg |= psl << 7;
+ reg = psst << 12;
+ reg |= psl << 7;
reg |= psht << 16;
return reg;
@@ -710,8 +718,8 @@ static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value)
pipr = in_be32(&pcmcia->pcmc_pipr);
- *value = ((pipr & (M8XX_PCMCIA_CD1(lsock)
- | M8XX_PCMCIA_CD2(lsock))) == 0) ? SS_DETECT : 0;
+ *value = ((pipr & (M8XX_PCMCIA_CD1(lsock)
+ | M8XX_PCMCIA_CD2(lsock))) == 0) ? SS_DETECT : 0;
*value |= (pipr & M8XX_PCMCIA_WP(lsock)) ? SS_WRPROT : 0;
if (s->state.flags & SS_IOCARD)
@@ -795,16 +803,16 @@ static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value)
/* read out VS1 and VS2 */
reg = (pipr & M8XX_PCMCIA_VS_MASK(lsock))
- >> M8XX_PCMCIA_VS_SHIFT(lsock);
+ >> M8XX_PCMCIA_VS_SHIFT(lsock);
- if(socket_get(lsock) == PCMCIA_SOCKET_KEY_LV) {
- switch(reg) {
+ if (socket_get(lsock) == PCMCIA_SOCKET_KEY_LV) {
+ switch (reg) {
case 1:
*value |= SS_3VCARD;
- break; /* GND, NC - 3.3V only */
+ break; /* GND, NC - 3.3V only */
case 2:
*value |= SS_XVCARD;
- break; /* NC. GND - x.xV only */
+ break; /* NC. GND - x.xV only */
};
}
@@ -812,7 +820,7 @@ static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value)
return 0;
}
-static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
+static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t * state)
{
int lsock = container_of(sock, struct socket_info, socket)->slot;
struct socket_info *s = &socket[lsock];
@@ -821,20 +829,20 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
unsigned long flags;
pcmconf8xx_t *pcmcia = socket[0].pcmcia;
- dprintk( "SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
- "io_irq %d, csc_mask %#2.2x)\n", lsock, state->flags,
- state->Vcc, state->Vpp, state->io_irq, state->csc_mask);
+ dprintk("SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
+ "io_irq %d, csc_mask %#2.2x)\n", lsock, state->flags,
+ state->Vcc, state->Vpp, state->io_irq, state->csc_mask);
/* First, set voltage - bail out if invalid */
- if(voltage_set(lsock, state->Vcc, state->Vpp))
+ if (voltage_set(lsock, state->Vcc, state->Vpp))
return -EINVAL;
-
/* Take care of reset... */
- if(state->flags & SS_RESET)
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXRESET); /* active high */
+ if (state->flags & SS_RESET)
+ out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXRESET); /* active high */
else
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXRESET);
+ out_be32(M8XX_PGCRX(lsock),
+ in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXRESET);
/* ... and output enable. */
@@ -846,10 +854,11 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
no pullups are present -> the cards act wierd.
So right now the buffers are enabled if the power is on. */
- if(state->Vcc || state->Vpp)
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXOE); /* active low */
+ if (state->Vcc || state->Vpp)
+ out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXOE); /* active low */
else
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXOE);
+ out_be32(M8XX_PGCRX(lsock),
+ in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXOE);
/*
* We'd better turn off interrupts before
@@ -866,17 +875,17 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
e = &s->events[0];
reg = 0;
- if(state->csc_mask & SS_DETECT) {
+ if (state->csc_mask & SS_DETECT) {
e->eventbit = SS_DETECT;
reg |= e->regbit = (M8XX_PCMCIA_CD2(lsock)
| M8XX_PCMCIA_CD1(lsock));
e++;
}
- if(state->flags & SS_IOCARD) {
+ if (state->flags & SS_IOCARD) {
/*
* I/O card
*/
- if(state->csc_mask & SS_STSCHG) {
+ if (state->csc_mask & SS_STSCHG) {
e->eventbit = SS_STSCHG;
reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock);
e++;
@@ -884,9 +893,10 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
/*
* If io_irq is non-zero we should enable irq.
*/
- if(state->io_irq) {
+ if (state->io_irq) {
out_be32(M8XX_PGCRX(lsock),
- in_be32(M8XX_PGCRX(lsock)) | mk_int_int_mask(s->hwirq) << 24);
+ in_be32(M8XX_PGCRX(lsock)) |
+ mk_int_int_mask(s->hwirq) << 24);
/*
* Strange thing here:
* The manual does not tell us which interrupt
@@ -897,33 +907,32 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
* have to be cleared in PSCR in the interrupt handler.
*/
reg |= M8XX_PCMCIA_RDY_L(lsock);
- }
- else
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & 0x00ffffff);
- }
- else {
+ } else
+ out_be32(M8XX_PGCRX(lsock),
+ in_be32(M8XX_PGCRX(lsock)) & 0x00ffffff);
+ } else {
/*
* Memory card
*/
- if(state->csc_mask & SS_BATDEAD) {
+ if (state->csc_mask & SS_BATDEAD) {
e->eventbit = SS_BATDEAD;
reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock);
e++;
}
- if(state->csc_mask & SS_BATWARN) {
+ if (state->csc_mask & SS_BATWARN) {
e->eventbit = SS_BATWARN;
reg |= e->regbit = M8XX_PCMCIA_BVD2(lsock);
e++;
}
/* What should I trigger on - low/high,raise,fall? */
- if(state->csc_mask & SS_READY) {
+ if (state->csc_mask & SS_READY) {
e->eventbit = SS_READY;
- reg |= e->regbit = 0; //??
+ reg |= e->regbit = 0; //??
e++;
}
}
- e->regbit = 0; /* terminate list */
+ e->regbit = 0; /* terminate list */
/*
* Clear the status changed .
@@ -940,7 +949,9 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
* Ones will enable the interrupt.
*/
- reg |= in_be32(&pcmcia->pcmc_per) & (M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
+ reg |=
+ in_be32(&pcmcia->
+ pcmc_per) & (M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
out_be32(&pcmcia->pcmc_per, reg);
spin_unlock_irqrestore(&events_lock, flags);
@@ -961,67 +972,66 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
unsigned int reg, winnr;
pcmconf8xx_t *pcmcia = s->pcmcia;
-
#define M8XX_SIZE (io->stop - io->start + 1)
#define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start)
- dprintk( "SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#4.4x-%#4.4x)\n", lsock, io->map, io->flags,
- io->speed, io->start, io->stop);
+ dprintk("SetIOMap(%d, %d, %#2.2x, %d ns, "
+ "%#4.4x-%#4.4x)\n", lsock, io->map, io->flags,
+ io->speed, io->start, io->stop);
if ((io->map >= PCMCIA_IO_WIN_NO) || (io->start > 0xffff)
|| (io->stop > 0xffff) || (io->stop < io->start))
return -EINVAL;
- if((reg = m8xx_get_graycode(M8XX_SIZE)) == -1)
+ if ((reg = m8xx_get_graycode(M8XX_SIZE)) == -1)
return -EINVAL;
- if(io->flags & MAP_ACTIVE) {
+ if (io->flags & MAP_ACTIVE) {
- dprintk( "io->flags & MAP_ACTIVE\n");
+ dprintk("io->flags & MAP_ACTIVE\n");
winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO)
- + (lsock * PCMCIA_IO_WIN_NO) + io->map;
+ + (lsock * PCMCIA_IO_WIN_NO) + io->map;
/* setup registers */
- w = (void *) &pcmcia->pcmc_pbr0;
+ w = (void *)&pcmcia->pcmc_pbr0;
w += winnr;
- out_be32(&w->or, 0); /* turn off window first */
+ out_be32(&w->or, 0); /* turn off window first */
out_be32(&w->br, M8XX_BASE);
reg <<= 27;
- reg |= M8XX_PCMCIA_POR_IO |(lsock << 2);
+ reg |= M8XX_PCMCIA_POR_IO | (lsock << 2);
reg |= m8xx_get_speed(io->speed, 1, s->bus_freq);
- if(io->flags & MAP_WRPROT)
+ if (io->flags & MAP_WRPROT)
reg |= M8XX_PCMCIA_POR_WRPROT;
- /*if(io->flags & (MAP_16BIT | MAP_AUTOSZ))*/
- if(io->flags & MAP_16BIT)
+ /*if(io->flags & (MAP_16BIT | MAP_AUTOSZ)) */
+ if (io->flags & MAP_16BIT)
reg |= M8XX_PCMCIA_POR_16BIT;
- if(io->flags & MAP_ACTIVE)
+ if (io->flags & MAP_ACTIVE)
reg |= M8XX_PCMCIA_POR_VALID;
out_be32(&w->or, reg);
dprintk("Socket %u: Mapped io window %u at %#8.8x, "
- "OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
+ "OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
} else {
/* shutdown IO window */
winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO)
- + (lsock * PCMCIA_IO_WIN_NO) + io->map;
+ + (lsock * PCMCIA_IO_WIN_NO) + io->map;
/* setup registers */
- w = (void *) &pcmcia->pcmc_pbr0;
+ w = (void *)&pcmcia->pcmc_pbr0;
w += winnr;
- out_be32(&w->or, 0); /* turn off window */
- out_be32(&w->br, 0); /* turn off base address */
+ out_be32(&w->or, 0); /* turn off window */
+ out_be32(&w->br, 0); /* turn off base address */
dprintk("Socket %u: Unmapped io window %u at %#8.8x, "
"OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
@@ -1029,15 +1039,14 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
/* copy the struct and modify the copy */
s->io_win[io->map] = *io;
- s->io_win[io->map].flags &= (MAP_WRPROT
- | MAP_16BIT
- | MAP_ACTIVE);
+ s->io_win[io->map].flags &= (MAP_WRPROT | MAP_16BIT | MAP_ACTIVE);
dprintk("SetIOMap exit\n");
return 0;
}
-static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *mem)
+static int m8xx_set_mem_map(struct pcmcia_socket *sock,
+ struct pccard_mem_map *mem)
{
int lsock = container_of(sock, struct socket_info, socket)->slot;
struct socket_info *s = &socket[lsock];
@@ -1046,19 +1055,19 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *m
unsigned int reg, winnr;
pcmconf8xx_t *pcmcia = s->pcmcia;
- dprintk( "SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
- mem->speed, mem->static_start, mem->card_start);
+ dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, "
+ "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
+ mem->speed, mem->static_start, mem->card_start);
if ((mem->map >= PCMCIA_MEM_WIN_NO)
-// || ((mem->s) >= PCMCIA_MEM_WIN_SIZE)
+// || ((mem->s) >= PCMCIA_MEM_WIN_SIZE)
|| (mem->card_start >= 0x04000000)
- || (mem->static_start & 0xfff) /* 4KByte resolution */
- || (mem->card_start & 0xfff))
+ || (mem->static_start & 0xfff) /* 4KByte resolution */
+ ||(mem->card_start & 0xfff))
return -EINVAL;
- if((reg = m8xx_get_graycode(PCMCIA_MEM_WIN_SIZE)) == -1) {
- printk( "Cannot set size to 0x%08x.\n", PCMCIA_MEM_WIN_SIZE);
+ if ((reg = m8xx_get_graycode(PCMCIA_MEM_WIN_SIZE)) == -1) {
+ printk("Cannot set size to 0x%08x.\n", PCMCIA_MEM_WIN_SIZE);
return -EINVAL;
}
reg <<= 27;
@@ -1067,50 +1076,47 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *m
/* Setup the window in the pcmcia controller */
- w = (void *) &pcmcia->pcmc_pbr0;
+ w = (void *)&pcmcia->pcmc_pbr0;
w += winnr;
reg |= lsock << 2;
reg |= m8xx_get_speed(mem->speed, 0, s->bus_freq);
- if(mem->flags & MAP_ATTRIB)
- reg |= M8XX_PCMCIA_POR_ATTRMEM;
+ if (mem->flags & MAP_ATTRIB)
+ reg |= M8XX_PCMCIA_POR_ATTRMEM;
- if(mem->flags & MAP_WRPROT)
+ if (mem->flags & MAP_WRPROT)
reg |= M8XX_PCMCIA_POR_WRPROT;
- if(mem->flags & MAP_16BIT)
+ if (mem->flags & MAP_16BIT)
reg |= M8XX_PCMCIA_POR_16BIT;
- if(mem->flags & MAP_ACTIVE)
+ if (mem->flags & MAP_ACTIVE)
reg |= M8XX_PCMCIA_POR_VALID;
out_be32(&w->or, reg);
dprintk("Socket %u: Mapped memory window %u at %#8.8x, "
- "OR = %#8.8x.\n", lsock, mem->map, w->br, w->or);
+ "OR = %#8.8x.\n", lsock, mem->map, w->br, w->or);
- if(mem->flags & MAP_ACTIVE) {
+ if (mem->flags & MAP_ACTIVE) {
/* get the new base address */
mem->static_start = PCMCIA_MEM_WIN_BASE +
- (PCMCIA_MEM_WIN_SIZE * winnr)
- + mem->card_start;
+ (PCMCIA_MEM_WIN_SIZE * winnr)
+ + mem->card_start;
}
dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
- mem->speed, mem->static_start, mem->card_start);
+ "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
+ mem->speed, mem->static_start, mem->card_start);
/* copy the struct and modify the copy */
old = &s->mem_win[mem->map];
*old = *mem;
- old->flags &= (MAP_ATTRIB
- | MAP_WRPROT
- | MAP_16BIT
- | MAP_ACTIVE);
+ old->flags &= (MAP_ATTRIB | MAP_WRPROT | MAP_16BIT | MAP_ACTIVE);
return 0;
}
@@ -1121,7 +1127,7 @@ static int m8xx_sock_init(struct pcmcia_socket *sock)
pccard_io_map io = { 0, 0, 0, 0, 1 };
pccard_mem_map mem = { 0, 0, 0, 0, 0, 0 };
- dprintk( "sock_init(%d)\n", s);
+ dprintk("sock_init(%d)\n", s);
m8xx_set_socket(sock, &dead_socket);
for (i = 0; i < PCMCIA_IO_WIN_NO; i++) {
@@ -1143,7 +1149,7 @@ static int m8xx_sock_suspend(struct pcmcia_socket *sock)
}
static struct pccard_operations m8xx_services = {
- .init = m8xx_sock_init,
+ .init = m8xx_sock_init,
.suspend = m8xx_sock_suspend,
.get_status = m8xx_get_status,
.set_socket = m8xx_set_socket,
@@ -1151,7 +1157,8 @@ static struct pccard_operations m8xx_services = {
.set_mem_map = m8xx_set_mem_map,
};
-static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id *match)
+static int __init m8xx_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
{
struct pcmcia_win *w;
unsigned int i, m, hwirq;
@@ -1162,49 +1169,50 @@ static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id
pcmcia_info("%s\n", version);
pcmcia = of_iomap(np, 0);
- if(pcmcia == NULL)
+ if (pcmcia == NULL)
return -EINVAL;
pcmcia_schlvl = irq_of_parse_and_map(np, 0);
- hwirq = irq_map[pcmcia_schlvl].hwirq;
+ hwirq = irq_map[pcmcia_schlvl].hwirq;
if (pcmcia_schlvl < 0)
return -EINVAL;
m8xx_pgcrx[0] = &pcmcia->pcmc_pgcra;
m8xx_pgcrx[1] = &pcmcia->pcmc_pgcrb;
-
pcmcia_info(PCMCIA_BOARD_MSG " using " PCMCIA_SLOT_MSG
" with IRQ %u (%d). \n", pcmcia_schlvl, hwirq);
/* Configure Status change interrupt */
- if(request_irq(pcmcia_schlvl, m8xx_interrupt, IRQF_SHARED,
- driver_name, socket)) {
+ if (request_irq(pcmcia_schlvl, m8xx_interrupt, IRQF_SHARED,
+ driver_name, socket)) {
pcmcia_error("Cannot allocate IRQ %u for SCHLVL!\n",
pcmcia_schlvl);
return -1;
}
- w = (void *) &pcmcia->pcmc_pbr0;
+ w = (void *)&pcmcia->pcmc_pbr0;
- out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(0)| M8XX_PCMCIA_MASK(1));
+ out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
clrbits32(&pcmcia->pcmc_per, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
/* connect interrupt and disable CxOE */
- out_be32(M8XX_PGCRX(0), M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
- out_be32(M8XX_PGCRX(1), M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
+ out_be32(M8XX_PGCRX(0),
+ M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
+ out_be32(M8XX_PGCRX(1),
+ M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
/* intialize the fixed memory windows */
- for(i = 0; i < PCMCIA_SOCKETS_NO; i++){
+ for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
out_be32(&w->br, PCMCIA_MEM_WIN_BASE +
- (PCMCIA_MEM_WIN_SIZE
- * (m + i * PCMCIA_MEM_WIN_NO)));
+ (PCMCIA_MEM_WIN_SIZE
+ * (m + i * PCMCIA_MEM_WIN_NO)));
- out_be32(&w->or, 0); /* set to not valid */
+ out_be32(&w->or, 0); /* set to not valid */
w++;
}
@@ -1218,10 +1226,11 @@ static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id
hardware_enable(0);
hardware_enable(1);
- for (i = 0 ; i < PCMCIA_SOCKETS_NO; i++) {
+ for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
socket[i].slot = i;
socket[i].socket.owner = THIS_MODULE;
- socket[i].socket.features = SS_CAP_PCCARD | SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP;
+ socket[i].socket.features =
+ SS_CAP_PCCARD | SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP;
socket[i].socket.irq_mask = 0x000;
socket[i].socket.map_size = 0x1000;
socket[i].socket.io_offset = 0;
@@ -1234,7 +1243,6 @@ static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id
socket[i].bus_freq = ppc_proc_freq;
socket[i].hwirq = hwirq;
-
}
for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
@@ -1246,25 +1254,25 @@ static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id
return 0;
}
-static int m8xx_remove(struct of_device* ofdev)
+static int m8xx_remove(struct of_device *ofdev)
{
u32 m, i;
struct pcmcia_win *w;
pcmconf8xx_t *pcmcia = socket[0].pcmcia;
for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
- w = (void *) &pcmcia->pcmc_pbr0;
+ w = (void *)&pcmcia->pcmc_pbr0;
out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(i));
out_be32(&pcmcia->pcmc_per,
- in_be32(&pcmcia->pcmc_per) & ~M8XX_PCMCIA_MASK(i));
+ in_be32(&pcmcia->pcmc_per) & ~M8XX_PCMCIA_MASK(i));
/* turn off interrupt and disable CxOE */
out_be32(M8XX_PGCRX(i), M8XX_PGCRX_CXOE);
/* turn off memory windows */
for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
- out_be32(&w->or, 0); /* set to not valid */
+ out_be32(&w->or, 0); /* set to not valid */
w++;
}
@@ -1299,21 +1307,21 @@ static int m8xx_resume(struct platform_device *pdev)
static struct of_device_id m8xx_pcmcia_match[] = {
{
- .type = "pcmcia",
- .compatible = "fsl,pq-pcmcia",
- },
+ .type = "pcmcia",
+ .compatible = "fsl,pq-pcmcia",
+ },
{},
};
MODULE_DEVICE_TABLE(of, m8xx_pcmcia_match);
static struct of_platform_driver m8xx_pcmcia_driver = {
- .name = (char *) driver_name,
- .match_table = m8xx_pcmcia_match,
- .probe = m8xx_probe,
- .remove = m8xx_remove,
- .suspend = m8xx_suspend,
- .resume = m8xx_resume,
+ .name = (char *)driver_name,
+ .match_table = m8xx_pcmcia_match,
+ .probe = m8xx_probe,
+ .remove = m8xx_remove,
+ .suspend = m8xx_suspend,
+ .resume = m8xx_resume,
};
static int __init m8xx_init(void)
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] [POWERPC] 8xx: mpc885ads pcmcia support
2007-05-06 1:26 ` Vitaly Bordug
@ 2007-05-07 13:56 ` Olof Johansson
-1 siblings, 0 replies; 10+ messages in thread
From: Olof Johansson @ 2007-05-07 13:56 UTC (permalink / raw)
To: Vitaly Bordug; +Cc: linux-pcmcia, linuxppc-dev, linux-kernel
Hi,
Some minor nitpicks below. Overall it looks good.
-Olof
On Sun, May 06, 2007 at 05:26:33AM +0400, Vitaly Bordug wrote:
> @@ -322,6 +334,70 @@ void init_smc_ioports(struct fs_uart_platform_info *data)
> }
> }
>
> +#ifdef CONFIG_PCMCIA_M8XX
> +static void pcmcia_hw_setup(int slot, int enable)
> +{
> + unsigned *bcsr_io;
> +
> + bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
> + if (enable)
> + clrbits32(bcsr_io, BCSR1_PCCEN);
> + else
> + setbits32(bcsr_io, BCSR1_PCCEN);
> +
> + iounmap(bcsr_io);
> +}
If you move this (and next) function up, you don't have to do the
prototypes in the beginning of the file. One less #ifdef that way.
> +
> +static int pcmcia_set_voltage(int slot, int vcc, int vpp)
> +{
> + u32 reg = 0;
> + unsigned *bcsr_io;
> +
> + bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
> +
> + switch(vcc) {
> + case 0:
> + break;
> + case 33:
> + reg |= BCSR1_PCCVCC0;
> + break;
> + case 50:
> + reg |= BCSR1_PCCVCC1;
> + break;
> + default:
> + return 1;
> + }
> +
> + switch(vpp) {
> + case 0:
> + break;
> + case 33:
> + case 50:
> + if(vcc == vpp)
> + reg |= BCSR1_PCCVPP1;
> + else
> + return 1;
> + break;
> + case 120:
> + if ((vcc == 33) || (vcc == 50))
> + reg |= BCSR1_PCCVPP0;
> + else
> + return 1;
> + default:
> + return 1;
> + }
> +
> + /* first, turn off all power */
> + clrbits32(bcsr_io, 0x00610000);
> +
> + /* enable new powersettings */
> + setbits32(bcsr_io, reg);
> +
> + iounmap(bcsr_io);
> + return 0;
> +}
> +#endif
> +
> int platform_device_skip(const char *model, int id)
> {
> #ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
> diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
> index 8a123c7..880e45f 100644
> --- a/arch/powerpc/sysdev/fsl_soc.c
> +++ b/arch/powerpc/sysdev/fsl_soc.c
> @@ -1028,6 +1028,19 @@ err:
>
> arch_initcall(fs_enet_of_init);
>
> +static int __init fsl_pcmcia_of_init(void)
> +{
> + struct device_node *np = NULL;
> + /*
> + * Register all the devices which type is "pcmcia"
> + */
> + while ((np = of_find_compatible_node(np,
> + "pcmcia", "fsl,pq-pcmcia")) != NULL)
> + of_platform_device_create(np, "m8xx-pcmcia", NULL);
Do you really need this now that you have the device table in the driver?
> + return 0;
> +}
> +
> +arch_initcall(fsl_pcmcia_of_init);
>
> static const char *smc_regs = "regs";
> static const char *smc_pram = "pram";
> diff --git a/arch/powerpc/sysdev/mpc8xx_pic.h b/arch/powerpc/sysdev/mpc8xx_pic.h
> index afa2ee6..07be061 100644
> --- a/arch/powerpc/sysdev/mpc8xx_pic.h
> +++ b/arch/powerpc/sysdev/mpc8xx_pic.h
> @@ -4,7 +4,7 @@
> #include <linux/irq.h>
> #include <linux/interrupt.h>
>
> -extern struct hw_interrupt_type mpc8xx_pic;
> +/*extern struct hw_interrupt_type mpc8xx_pic;*/
Take it out or leave it in, but don't comment it out, please
>
> int mpc8xx_pic_init(void);
> unsigned int mpc8xx_get_irq(void);
> diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
> index 35f8864..c3fd55d 100644
> --- a/drivers/pcmcia/Kconfig
> +++ b/drivers/pcmcia/Kconfig
> @@ -183,6 +183,7 @@ config PCMCIA_M8XX
> tristate "MPC8xx PCMCIA support"
> depends on PCMCIA && PPC && 8xx
> select PCCARD_IODYN
> + select PCCARD_NONSTATIC
I was going to say "whitespace!", but seems like this added line is the only one
that's actually using tabs. :-) (Yes, I saw 2/2 that fixes this).
> help
> Say Y here to include support for PowerPC 8xx series PCMCIA
> controller.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] [POWERPC] 8xx: mpc885ads pcmcia support
@ 2007-05-07 13:56 ` Olof Johansson
0 siblings, 0 replies; 10+ messages in thread
From: Olof Johansson @ 2007-05-07 13:56 UTC (permalink / raw)
To: Vitaly Bordug; +Cc: linuxppc-dev, linux-pcmcia, linux-kernel
Hi,
Some minor nitpicks below. Overall it looks good.
-Olof
On Sun, May 06, 2007 at 05:26:33AM +0400, Vitaly Bordug wrote:
> @@ -322,6 +334,70 @@ void init_smc_ioports(struct fs_uart_platform_info *data)
> }
> }
>
> +#ifdef CONFIG_PCMCIA_M8XX
> +static void pcmcia_hw_setup(int slot, int enable)
> +{
> + unsigned *bcsr_io;
> +
> + bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
> + if (enable)
> + clrbits32(bcsr_io, BCSR1_PCCEN);
> + else
> + setbits32(bcsr_io, BCSR1_PCCEN);
> +
> + iounmap(bcsr_io);
> +}
If you move this (and next) function up, you don't have to do the
prototypes in the beginning of the file. One less #ifdef that way.
> +
> +static int pcmcia_set_voltage(int slot, int vcc, int vpp)
> +{
> + u32 reg = 0;
> + unsigned *bcsr_io;
> +
> + bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
> +
> + switch(vcc) {
> + case 0:
> + break;
> + case 33:
> + reg |= BCSR1_PCCVCC0;
> + break;
> + case 50:
> + reg |= BCSR1_PCCVCC1;
> + break;
> + default:
> + return 1;
> + }
> +
> + switch(vpp) {
> + case 0:
> + break;
> + case 33:
> + case 50:
> + if(vcc == vpp)
> + reg |= BCSR1_PCCVPP1;
> + else
> + return 1;
> + break;
> + case 120:
> + if ((vcc == 33) || (vcc == 50))
> + reg |= BCSR1_PCCVPP0;
> + else
> + return 1;
> + default:
> + return 1;
> + }
> +
> + /* first, turn off all power */
> + clrbits32(bcsr_io, 0x00610000);
> +
> + /* enable new powersettings */
> + setbits32(bcsr_io, reg);
> +
> + iounmap(bcsr_io);
> + return 0;
> +}
> +#endif
> +
> int platform_device_skip(const char *model, int id)
> {
> #ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
> diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
> index 8a123c7..880e45f 100644
> --- a/arch/powerpc/sysdev/fsl_soc.c
> +++ b/arch/powerpc/sysdev/fsl_soc.c
> @@ -1028,6 +1028,19 @@ err:
>
> arch_initcall(fs_enet_of_init);
>
> +static int __init fsl_pcmcia_of_init(void)
> +{
> + struct device_node *np = NULL;
> + /*
> + * Register all the devices which type is "pcmcia"
> + */
> + while ((np = of_find_compatible_node(np,
> + "pcmcia", "fsl,pq-pcmcia")) != NULL)
> + of_platform_device_create(np, "m8xx-pcmcia", NULL);
Do you really need this now that you have the device table in the driver?
> + return 0;
> +}
> +
> +arch_initcall(fsl_pcmcia_of_init);
>
> static const char *smc_regs = "regs";
> static const char *smc_pram = "pram";
> diff --git a/arch/powerpc/sysdev/mpc8xx_pic.h b/arch/powerpc/sysdev/mpc8xx_pic.h
> index afa2ee6..07be061 100644
> --- a/arch/powerpc/sysdev/mpc8xx_pic.h
> +++ b/arch/powerpc/sysdev/mpc8xx_pic.h
> @@ -4,7 +4,7 @@
> #include <linux/irq.h>
> #include <linux/interrupt.h>
>
> -extern struct hw_interrupt_type mpc8xx_pic;
> +/*extern struct hw_interrupt_type mpc8xx_pic;*/
Take it out or leave it in, but don't comment it out, please
>
> int mpc8xx_pic_init(void);
> unsigned int mpc8xx_get_irq(void);
> diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
> index 35f8864..c3fd55d 100644
> --- a/drivers/pcmcia/Kconfig
> +++ b/drivers/pcmcia/Kconfig
> @@ -183,6 +183,7 @@ config PCMCIA_M8XX
> tristate "MPC8xx PCMCIA support"
> depends on PCMCIA && PPC && 8xx
> select PCCARD_IODYN
> + select PCCARD_NONSTATIC
I was going to say "whitespace!", but seems like this added line is the only one
that's actually using tabs. :-) (Yes, I saw 2/2 that fixes this).
> help
> Say Y here to include support for PowerPC 8xx series PCMCIA
> controller.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] [POWERPC] 8xx: mpc885ads pcmcia support
2007-05-07 13:56 ` Olof Johansson
@ 2007-05-08 7:23 ` Vitaly Bordug
-1 siblings, 0 replies; 10+ messages in thread
From: Vitaly Bordug @ 2007-05-08 7:23 UTC (permalink / raw)
To: Olof Johansson; +Cc: linux-pcmcia, linuxppc-dev, linux-kernel
On Mon, 7 May 2007 08:56:09 -0500
Olof Johansson wrote:
> Hi,
>
> Some minor nitpicks below. Overall it looks good.
>
>
> -Olof
>
> On Sun, May 06, 2007 at 05:26:33AM +0400, Vitaly Bordug wrote:
> > @@ -322,6 +334,70 @@ void init_smc_ioports(struct
> > fs_uart_platform_info *data) }
> > }
> >
> > +#ifdef CONFIG_PCMCIA_M8XX
> > +static void pcmcia_hw_setup(int slot, int enable)
> > +{
> > + unsigned *bcsr_io;
> > +
> > + bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
> > + if (enable)
> > + clrbits32(bcsr_io, BCSR1_PCCEN);
> > + else
> > + setbits32(bcsr_io, BCSR1_PCCEN);
> > +
> > + iounmap(bcsr_io);
> > +}
>
> If you move this (and next) function up, you don't have to do the
> prototypes in the beginning of the file. One less #ifdef that way.
>
ok.
> > +
> > +static int pcmcia_set_voltage(int slot, int vcc, int vpp)
> > +{
> > + u32 reg = 0;
> > + unsigned *bcsr_io;
> > +
> > + bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
> > +
> > + switch(vcc) {
> > + case 0:
> > + break;
> > + case 33:
> > + reg |= BCSR1_PCCVCC0;
> > + break;
> > + case 50:
> > + reg |= BCSR1_PCCVCC1;
> > + break;
> > + default:
> > + return 1;
> > + }
> > +
> > + switch(vpp) {
> > + case 0:
> > + break;
> > + case 33:
> > + case 50:
> > + if(vcc == vpp)
> > + reg |= BCSR1_PCCVPP1;
> > + else
> > + return 1;
> > + break;
> > + case 120:
> > + if ((vcc == 33) || (vcc == 50))
> > + reg |= BCSR1_PCCVPP0;
> > + else
> > + return 1;
> > + default:
> > + return 1;
> > + }
> > +
> > + /* first, turn off all power */
> > + clrbits32(bcsr_io, 0x00610000);
> > +
> > + /* enable new powersettings */
> > + setbits32(bcsr_io, reg);
> > +
> > + iounmap(bcsr_io);
> > + return 0;
> > +}
> > +#endif
> > +
> > int platform_device_skip(const char *model, int id)
> > {
> > #ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
> > diff --git a/arch/powerpc/sysdev/fsl_soc.c
> > b/arch/powerpc/sysdev/fsl_soc.c index 8a123c7..880e45f 100644
> > --- a/arch/powerpc/sysdev/fsl_soc.c
> > +++ b/arch/powerpc/sysdev/fsl_soc.c
> > @@ -1028,6 +1028,19 @@ err:
> >
> > arch_initcall(fs_enet_of_init);
> >
> > +static int __init fsl_pcmcia_of_init(void)
> > +{
> > + struct device_node *np = NULL;
> > + /*
> > + * Register all the devices which type is "pcmcia"
> > + */
> > + while ((np = of_find_compatible_node(np,
> > + "pcmcia", "fsl,pq-pcmcia")) != NULL)
> > + of_platform_device_create(np,
> > "m8xx-pcmcia", NULL);
>
> Do you really need this now that you have the device table in the
> driver?
>
Want to keep this one for now...
> > + return 0;
> > +}
> > +
> > +arch_initcall(fsl_pcmcia_of_init);
> >
> > static const char *smc_regs = "regs";
> > static const char *smc_pram = "pram";
> > diff --git a/arch/powerpc/sysdev/mpc8xx_pic.h
> > b/arch/powerpc/sysdev/mpc8xx_pic.h index afa2ee6..07be061 100644
> > --- a/arch/powerpc/sysdev/mpc8xx_pic.h
> > +++ b/arch/powerpc/sysdev/mpc8xx_pic.h
> > @@ -4,7 +4,7 @@
> > #include <linux/irq.h>
> > #include <linux/interrupt.h>
> >
> > -extern struct hw_interrupt_type mpc8xx_pic;
> > +/*extern struct hw_interrupt_type mpc8xx_pic;*/
>
> Take it out or leave it in, but don't comment it out, please
>
ok
> >
> > int mpc8xx_pic_init(void);
> > unsigned int mpc8xx_get_irq(void);
> > diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
> > index 35f8864..c3fd55d 100644
> > --- a/drivers/pcmcia/Kconfig
> > +++ b/drivers/pcmcia/Kconfig
> > @@ -183,6 +183,7 @@ config PCMCIA_M8XX
> > tristate "MPC8xx PCMCIA support"
> > depends on PCMCIA && PPC && 8xx
> > select PCCARD_IODYN
> > + select PCCARD_NONSTATIC
>
> I was going to say "whitespace!", but seems like this added line is
> the only one that's actually using tabs. :-) (Yes, I saw 2/2 that
> fixes this).
>
> > help
> > Say Y here to include support for PowerPC 8xx series PCMCIA
> > controller.
--
Sincerely, Vitaly
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] [POWERPC] 8xx: mpc885ads pcmcia support
@ 2007-05-08 7:23 ` Vitaly Bordug
0 siblings, 0 replies; 10+ messages in thread
From: Vitaly Bordug @ 2007-05-08 7:23 UTC (permalink / raw)
To: Olof Johansson; +Cc: linuxppc-dev, linux-pcmcia, linux-kernel
On Mon, 7 May 2007 08:56:09 -0500
Olof Johansson wrote:
> Hi,
>
> Some minor nitpicks below. Overall it looks good.
>
>
> -Olof
>
> On Sun, May 06, 2007 at 05:26:33AM +0400, Vitaly Bordug wrote:
> > @@ -322,6 +334,70 @@ void init_smc_ioports(struct
> > fs_uart_platform_info *data) }
> > }
> >
> > +#ifdef CONFIG_PCMCIA_M8XX
> > +static void pcmcia_hw_setup(int slot, int enable)
> > +{
> > + unsigned *bcsr_io;
> > +
> > + bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
> > + if (enable)
> > + clrbits32(bcsr_io, BCSR1_PCCEN);
> > + else
> > + setbits32(bcsr_io, BCSR1_PCCEN);
> > +
> > + iounmap(bcsr_io);
> > +}
>
> If you move this (and next) function up, you don't have to do the
> prototypes in the beginning of the file. One less #ifdef that way.
>
ok.
> > +
> > +static int pcmcia_set_voltage(int slot, int vcc, int vpp)
> > +{
> > + u32 reg = 0;
> > + unsigned *bcsr_io;
> > +
> > + bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
> > +
> > + switch(vcc) {
> > + case 0:
> > + break;
> > + case 33:
> > + reg |= BCSR1_PCCVCC0;
> > + break;
> > + case 50:
> > + reg |= BCSR1_PCCVCC1;
> > + break;
> > + default:
> > + return 1;
> > + }
> > +
> > + switch(vpp) {
> > + case 0:
> > + break;
> > + case 33:
> > + case 50:
> > + if(vcc == vpp)
> > + reg |= BCSR1_PCCVPP1;
> > + else
> > + return 1;
> > + break;
> > + case 120:
> > + if ((vcc == 33) || (vcc == 50))
> > + reg |= BCSR1_PCCVPP0;
> > + else
> > + return 1;
> > + default:
> > + return 1;
> > + }
> > +
> > + /* first, turn off all power */
> > + clrbits32(bcsr_io, 0x00610000);
> > +
> > + /* enable new powersettings */
> > + setbits32(bcsr_io, reg);
> > +
> > + iounmap(bcsr_io);
> > + return 0;
> > +}
> > +#endif
> > +
> > int platform_device_skip(const char *model, int id)
> > {
> > #ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
> > diff --git a/arch/powerpc/sysdev/fsl_soc.c
> > b/arch/powerpc/sysdev/fsl_soc.c index 8a123c7..880e45f 100644
> > --- a/arch/powerpc/sysdev/fsl_soc.c
> > +++ b/arch/powerpc/sysdev/fsl_soc.c
> > @@ -1028,6 +1028,19 @@ err:
> >
> > arch_initcall(fs_enet_of_init);
> >
> > +static int __init fsl_pcmcia_of_init(void)
> > +{
> > + struct device_node *np = NULL;
> > + /*
> > + * Register all the devices which type is "pcmcia"
> > + */
> > + while ((np = of_find_compatible_node(np,
> > + "pcmcia", "fsl,pq-pcmcia")) != NULL)
> > + of_platform_device_create(np,
> > "m8xx-pcmcia", NULL);
>
> Do you really need this now that you have the device table in the
> driver?
>
Want to keep this one for now...
> > + return 0;
> > +}
> > +
> > +arch_initcall(fsl_pcmcia_of_init);
> >
> > static const char *smc_regs = "regs";
> > static const char *smc_pram = "pram";
> > diff --git a/arch/powerpc/sysdev/mpc8xx_pic.h
> > b/arch/powerpc/sysdev/mpc8xx_pic.h index afa2ee6..07be061 100644
> > --- a/arch/powerpc/sysdev/mpc8xx_pic.h
> > +++ b/arch/powerpc/sysdev/mpc8xx_pic.h
> > @@ -4,7 +4,7 @@
> > #include <linux/irq.h>
> > #include <linux/interrupt.h>
> >
> > -extern struct hw_interrupt_type mpc8xx_pic;
> > +/*extern struct hw_interrupt_type mpc8xx_pic;*/
>
> Take it out or leave it in, but don't comment it out, please
>
ok
> >
> > int mpc8xx_pic_init(void);
> > unsigned int mpc8xx_get_irq(void);
> > diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
> > index 35f8864..c3fd55d 100644
> > --- a/drivers/pcmcia/Kconfig
> > +++ b/drivers/pcmcia/Kconfig
> > @@ -183,6 +183,7 @@ config PCMCIA_M8XX
> > tristate "MPC8xx PCMCIA support"
> > depends on PCMCIA && PPC && 8xx
> > select PCCARD_IODYN
> > + select PCCARD_NONSTATIC
>
> I was going to say "whitespace!", but seems like this added line is
> the only one that's actually using tabs. :-) (Yes, I saw 2/2 that
> fixes this).
>
> > help
> > Say Y here to include support for PowerPC 8xx series PCMCIA
> > controller.
--
Sincerely, Vitaly
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2007-05-08 7:25 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-05-06 1:26 [PATCH 0/2] of_device 8xx PCMCIA support && cleanup Vitaly Bordug
2007-05-06 1:26 ` Vitaly Bordug
2007-05-06 1:26 ` [PATCH 1/2] [POWERPC] 8xx: mpc885ads pcmcia support Vitaly Bordug
2007-05-06 1:26 ` Vitaly Bordug
2007-05-07 13:56 ` Olof Johansson
2007-05-07 13:56 ` Olof Johansson
2007-05-08 7:23 ` Vitaly Bordug
2007-05-08 7:23 ` Vitaly Bordug
2007-05-06 1:26 ` [PATCH 2/2] [POWERPC] 8xx: fix whitespace and indentation Vitaly Bordug
2007-05-06 1:26 ` Vitaly Bordug
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.