* [PATCH 0/2] NR_CPUS: increase maximum NR_CPUS to 4096
@ 2008-03-26 1:41 ` Mike Travis
0 siblings, 0 replies; 26+ messages in thread
From: Mike Travis @ 2008-03-26 1:41 UTC (permalink / raw)
To: Andrew Morton; +Cc: Ingo Molnar, linux-mm, linux-kernel
Increases the limit of NR_CPUS to 4096 and introduces a
boolean called "MAXSMP" which when set (e.g. "allyesconfig")
will set NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
I've been running this config (4k NR_CPUS, 512 Max Nodes)
on an AMD box with 2 dual-cores and 4gb memory. I've also
successfully booted it in a simulated 2cpus/1Gb environment.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
Signed-off-by: Mike Travis <travis@sgi.com>
---
Memory usage effects from upping NR_CPUS to 4096 and MAX_NUMANODES to 512.
255-akpm2: akpm2 config with NR_CPUS=255 / NUMA_NODE_SHIFT=6
4k-akpm2: akpm2 config with NR_CPUS=4096 / NUMA_NODE_SHIFT=9
====== Data (-l 1000)
1 - 255-akpm2
2 - 4k-akpm2
.1. .2. ..final..
1114112 +3899392 5013504 +350% irq_desc(.data.cacheline_aligned)
313344 +4177920 4491264 +1333% irq_cfg(.data.read_mostly)
76800 +537600 614400 +700% early_node_map(.init.data)
32640 +491648 524288 +1506% boot_pageset(.bss)
32640 +491648 524288 +1506% boot_cpu_pda(.data.cacheline_aligned)
23040 +161280 184320 +700% initkmem_list3(.init.data)
5632 +39424 45056 +700% node_devices(.bss)
4096 +28672 32768 +700% plat_node_bdata(.bss)
2656 +34312 36968 +1291% cache_cache(.data)
2048 +14336 16384 +700% rio_devs(.init.data)
2048 +260096 262144 +12700% node_to_cpumask_map(.data.read_mostly)
2040 +30728 32768 +1506% centrino_model(.bss)
2040 +30728 32768 +1506% centrino_cpu(.bss)
2040 +30728 32768 +1506% _cpu_pda(.data.read_mostly)
1024 +1024 2048 +100% pxm_to_node_map(.data)
1024 +7168 8192 +700% nodes_add(.bss)
1024 +7168 8192 +700% nodes(.init.data)
1024 +7168 8192 +700% hugepage_freelists(.bss)
1020 +15364 16384 +1506% x86_cpu_to_node_map_init(.data)
1020 +15364 16384 +1506% cpu_set_freq(.bss)
1020 +15364 16384 +1506% cpu_min_freq(.bss)
1020 +15364 16384 +1506% cpu_max_freq(.bss)
1020 +15364 16384 +1506% cpu_is_managed(.bss)
1020 +15364 16384 +1506% cpu_cur_freq(.bss)
512 +3584 4096 +700% zone_movable_pfn(.init.data)
512 +3584 4096 +700% scal_devs(.init.data)
512 +3584 4096 +700% node_data(.data.read_mostly)
510 +7682 8192 +1506% x86_cpu_to_apicid_init(.init.data)
510 +7682 8192 +1506% x86_bios_cpu_apicid_init(.init.data)
0 +4096 4096 . tvec_base_done(.data)
0 +2048 2048 . surplus_huge_pages_node(.bss)
0 +2048 2048 . nr_huge_pages_node(.bss)
0 +2048 2048 . node_to_pxm_map(.data)
0 +2048 2048 . node_order(.bss)
0 +2048 2048 . node_load(.bss)
0 +2048 2048 . free_huge_pages_node(.bss)
0 +2048 2048 . fake_node_to_pxm_map(.init.data)
0 +1552 1552 . def_root_domain(.bss)
====== Sections (-l 500)
1 - 255-akpm2
2 - 4k-akpm2
.1. .2. ..final..
63092788 +10579589 73672377 +16% Total
41514099 +93823 41607922 <1% .debug_info
6648945 -2268 6646677 <1% .debug_loc
3365341 +7483 3372824 <1% .text
2631073 -1672 2629401 <1% .debug_line
1320219 +31557 1351776 +2% .debug_abbrev
1149568 +4391040 5540608 +381% .data.cacheline_aligned
1106192 -4784 1101408 <1% .debug_ranges
732736 +728832 1461568 +99% .bss
329672 +4474992 4804664 +1357% .data.read_mostly
285576 +100320 385896 +35% .data
173664 +751936 925600 +432% .init.data
40824 +7808 48632 +19% .data.percpu
====== Text/Data ()
1 - 255-akpm2
2 - 4k-akpm2
.1. .2. ..final..
3364864 +8192 3373056 <1% TextSize
1552384 +100352 1652736 +6% DataSize
733184 +729088 1462272 +99% BssSize
393216 +757760 1150976 +192% InitSize
40960 +8192 49152 +20% PerCPU
1529856 +8869888 10399744 +579% OtherSize
7614464 +10473472 18087936 +137% Totals
====== PerCPU ()
1 - 255-akpm2
2 - 4k-akpm2
.1. .2. ..final..
18432 -2048 16384 -11% kstat
10240 -2048 8192 -20% init_tss
2048 -2048 . -100% fdtable_defer_list
0 +2048 2048 . node_domains
0 +2048 2048 . lru_add_active_pvecs
0 +2048 2048 . cpuidle_devices
0 +2048 2048 . cpu_mask
0 +2048 2048 . cpu_info
0 +2048 2048 . cpu_core_map
0 +2048 2048 . core_domains
30720 +8192 38912 +26% Totals
====== Stack (-l 1000)
1 - 255-akpm2
2 - 4k-akpm2
.1. .2. ..final..
0 +4216 4216 . show_schedstat
0 +2744 2744 . build_sched_domains
0 +2152 2152 . centrino_target
0 +1640 1640 . setup_IO_APIC
0 +1592 1592 . move_task_off_dead_cpu
0 +1576 1576 . setup_IO_APIC_irq
0 +1560 1560 . tick_notify
0 +1560 1560 . __assign_irq_vector
0 +1552 1552 . arch_setup_msi_irq
0 +1552 1552 . arch_setup_ht_irq
0 +1544 1544 . tick_do_periodic_broadcast
0 +1544 1544 . irq_affinity_write_proc
0 +1144 1144 . threshold_create_device
0 +1112 1112 . sched_balance_self
0 +1064 1064 . _cpu_down
0 +1056 1056 . __smp_call_function_mask
0 +1048 1048 . store_threshold_limit
0 +1048 1048 . set_ioapic_affinity_irq
0 +1048 1048 . acpi_processor_set_throttling
0 +1048 1048 . acpi_map_lsapic
0 +1040 1040 . store_interrupt_enable
0 +1040 1040 . set_msi_irq_affinity
0 +1040 1040 . set_ht_irq_affinity
0 +1032 1032 . store_error_count
0 +1032 1032 . show_error_count
0 +1032 1032 . setup_ioapic_dest
0 +1032 1032 . sched_setaffinity
0 +1032 1032 . physflat_send_IPI_allbutself
0 +1032 1032 . native_flush_tlb_others
0 +1032 1032 . move_masked_irq
0 +1032 1032 . flat_send_IPI_allbutself
0 +1024 1024 . pci_bus_show_cpuaffinity
0 +1024 1024 . machine_crash_shutdown
0 +1024 1024 . local_cpus_show
0 +1024 1024 . irq_complete_move
0 +1024 1024 . ioapic_retrigger_irq
0 +1024 1024 . fixup_irqs
0 +1024 1024 . create_irq
====== MemInfo ()
1 - 255-akpm2
2 - 4k-akpm2
.1. .2. ..final..
30146560 +786432 30932992 +2% Active
1018880 +64512 1083392 +6% Active(Node.0)
6517760 +132096 6649856 +2% Active(Node.1)
17465344 -12288 17453056 <1% AnonPages
2932736 +69632 3002368 +2% AnonPages(Node.0)
14532608 -81920 14450688 <1% AnonPages(Node.1)
5804032 +327680 6131712 +5% Buffers
57851904 +17252352 75104256 +29% Cached
10078793728 -5058560 10073735168 <1% CommitLimit
73453568 +1028096 74481664 +1% Committed_AS
184320 -184320 . -100% Dirty
20480 -20480 . -100% Dirty(Node.0)
163840 -163840 . -100% Dirty(Node.1)
3391488 +352256 3743744 +10% FilePages(Node.0)
60264448 +17227776 77492224 +28% FilePages(Node.1)
50900992 +16818176 67719168 +33% Inactive
561152 +41984 603136 +7% Inactive(Node.0)
12164096 +4162560 16326656 +34% Inactive(Node.1)
8847360 +16384 8863744 <1% Mapped
290816 +45056 335872 +15% Mapped(Node.0)
8556544 -28672 8527872 <1% Mapped(Node.1)
4014837760 -54091776 3960745984 -1% MemFree
2012188672 -16060416 1996128256 <1% MemFree(Node.0)
2002522112 -38031360 1964490752 -1% MemFree(Node.1)
4151279616 -10117120 4141162496 <1% MemTotal
134877184 +16060416 150937600 +11% MemUsed(Node.0)
143912960 +38031360 181944320 +26% MemUsed(Node.1)
2306048 -8192 2297856 <1% PageTables
872448 +32768 905216 +3% PageTables(Node.0)
1433600 -40960 1392640 -2% PageTables(Node.1)
8290304 +217088 8507392 +2% SReclaimable
1155072 -184320 970752 -15% SReclaimable(Node.0)
7135232 +401408 7536640 +5% SReclaimable(Node.1)
12480512 +11087872 23568384 +88% SUnreclaim
4730880 +6569984 11300864 +138% SUnreclaim(Node.0)
7749632 +4517888 12267520 +58% SUnreclaim(Node.1)
20770816 +11304960 32075776 +54% Slab
5885952 +6385664 12271616 +108% Slab(Node.0)
14884864 +4919296 19804160 +33% Slab(Node.1)
159670272 -4096 159666176 <1% VmallocUsed
23140846592 +33765376 23174611968 +0% Totals
Memory usage in a simulated 2cpu/1gb environment using the
default configuration and NR_CPUS=4096, MAX Nodes=512:
Memory: 1013440k/1048576k available
(3588k kernel code, 33728k reserved, 1962k data, 1212k init)
MemTotal: 1014652 kB
MemFree: 991364 kB
Buffers: 192 kB
Cached: 3436 kB
SwapCached: 0 kB
Active: 1636 kB
Inactive: 2648 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 20 kB
Writeback: 0 kB
AnonPages: 656 kB
Mapped: 1412 kB
Slab: 12752 kB
SReclaimable: 236 kB
SUnreclaim: 12516 kB
PageTables: 36 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
CommitLimit: 507324 kB
Committed_AS: 0 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 4896 kB
VmallocChunk: 34359733471 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
--
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 0/2] NR_CPUS: increase maximum NR_CPUS to 4096
@ 2008-03-26 1:41 ` Mike Travis
0 siblings, 0 replies; 26+ messages in thread
From: Mike Travis @ 2008-03-26 1:41 UTC (permalink / raw)
To: Andrew Morton; +Cc: Ingo Molnar, linux-mm, linux-kernel
Increases the limit of NR_CPUS to 4096 and introduces a
boolean called "MAXSMP" which when set (e.g. "allyesconfig")
will set NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
I've been running this config (4k NR_CPUS, 512 Max Nodes)
on an AMD box with 2 dual-cores and 4gb memory. I've also
successfully booted it in a simulated 2cpus/1Gb environment.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
Signed-off-by: Mike Travis <travis@sgi.com>
---
Memory usage effects from upping NR_CPUS to 4096 and MAX_NUMANODES to 512.
255-akpm2: akpm2 config with NR_CPUS=255 / NUMA_NODE_SHIFT=6
4k-akpm2: akpm2 config with NR_CPUS=4096 / NUMA_NODE_SHIFT=9
====== Data (-l 1000)
1 - 255-akpm2
2 - 4k-akpm2
.1. .2. ..final..
1114112 +3899392 5013504 +350% irq_desc(.data.cacheline_aligned)
313344 +4177920 4491264 +1333% irq_cfg(.data.read_mostly)
76800 +537600 614400 +700% early_node_map(.init.data)
32640 +491648 524288 +1506% boot_pageset(.bss)
32640 +491648 524288 +1506% boot_cpu_pda(.data.cacheline_aligned)
23040 +161280 184320 +700% initkmem_list3(.init.data)
5632 +39424 45056 +700% node_devices(.bss)
4096 +28672 32768 +700% plat_node_bdata(.bss)
2656 +34312 36968 +1291% cache_cache(.data)
2048 +14336 16384 +700% rio_devs(.init.data)
2048 +260096 262144 +12700% node_to_cpumask_map(.data.read_mostly)
2040 +30728 32768 +1506% centrino_model(.bss)
2040 +30728 32768 +1506% centrino_cpu(.bss)
2040 +30728 32768 +1506% _cpu_pda(.data.read_mostly)
1024 +1024 2048 +100% pxm_to_node_map(.data)
1024 +7168 8192 +700% nodes_add(.bss)
1024 +7168 8192 +700% nodes(.init.data)
1024 +7168 8192 +700% hugepage_freelists(.bss)
1020 +15364 16384 +1506% x86_cpu_to_node_map_init(.data)
1020 +15364 16384 +1506% cpu_set_freq(.bss)
1020 +15364 16384 +1506% cpu_min_freq(.bss)
1020 +15364 16384 +1506% cpu_max_freq(.bss)
1020 +15364 16384 +1506% cpu_is_managed(.bss)
1020 +15364 16384 +1506% cpu_cur_freq(.bss)
512 +3584 4096 +700% zone_movable_pfn(.init.data)
512 +3584 4096 +700% scal_devs(.init.data)
512 +3584 4096 +700% node_data(.data.read_mostly)
510 +7682 8192 +1506% x86_cpu_to_apicid_init(.init.data)
510 +7682 8192 +1506% x86_bios_cpu_apicid_init(.init.data)
0 +4096 4096 . tvec_base_done(.data)
0 +2048 2048 . surplus_huge_pages_node(.bss)
0 +2048 2048 . nr_huge_pages_node(.bss)
0 +2048 2048 . node_to_pxm_map(.data)
0 +2048 2048 . node_order(.bss)
0 +2048 2048 . node_load(.bss)
0 +2048 2048 . free_huge_pages_node(.bss)
0 +2048 2048 . fake_node_to_pxm_map(.init.data)
0 +1552 1552 . def_root_domain(.bss)
====== Sections (-l 500)
1 - 255-akpm2
2 - 4k-akpm2
.1. .2. ..final..
63092788 +10579589 73672377 +16% Total
41514099 +93823 41607922 <1% .debug_info
6648945 -2268 6646677 <1% .debug_loc
3365341 +7483 3372824 <1% .text
2631073 -1672 2629401 <1% .debug_line
1320219 +31557 1351776 +2% .debug_abbrev
1149568 +4391040 5540608 +381% .data.cacheline_aligned
1106192 -4784 1101408 <1% .debug_ranges
732736 +728832 1461568 +99% .bss
329672 +4474992 4804664 +1357% .data.read_mostly
285576 +100320 385896 +35% .data
173664 +751936 925600 +432% .init.data
40824 +7808 48632 +19% .data.percpu
====== Text/Data ()
1 - 255-akpm2
2 - 4k-akpm2
.1. .2. ..final..
3364864 +8192 3373056 <1% TextSize
1552384 +100352 1652736 +6% DataSize
733184 +729088 1462272 +99% BssSize
393216 +757760 1150976 +192% InitSize
40960 +8192 49152 +20% PerCPU
1529856 +8869888 10399744 +579% OtherSize
7614464 +10473472 18087936 +137% Totals
====== PerCPU ()
1 - 255-akpm2
2 - 4k-akpm2
.1. .2. ..final..
18432 -2048 16384 -11% kstat
10240 -2048 8192 -20% init_tss
2048 -2048 . -100% fdtable_defer_list
0 +2048 2048 . node_domains
0 +2048 2048 . lru_add_active_pvecs
0 +2048 2048 . cpuidle_devices
0 +2048 2048 . cpu_mask
0 +2048 2048 . cpu_info
0 +2048 2048 . cpu_core_map
0 +2048 2048 . core_domains
30720 +8192 38912 +26% Totals
====== Stack (-l 1000)
1 - 255-akpm2
2 - 4k-akpm2
.1. .2. ..final..
0 +4216 4216 . show_schedstat
0 +2744 2744 . build_sched_domains
0 +2152 2152 . centrino_target
0 +1640 1640 . setup_IO_APIC
0 +1592 1592 . move_task_off_dead_cpu
0 +1576 1576 . setup_IO_APIC_irq
0 +1560 1560 . tick_notify
0 +1560 1560 . __assign_irq_vector
0 +1552 1552 . arch_setup_msi_irq
0 +1552 1552 . arch_setup_ht_irq
0 +1544 1544 . tick_do_periodic_broadcast
0 +1544 1544 . irq_affinity_write_proc
0 +1144 1144 . threshold_create_device
0 +1112 1112 . sched_balance_self
0 +1064 1064 . _cpu_down
0 +1056 1056 . __smp_call_function_mask
0 +1048 1048 . store_threshold_limit
0 +1048 1048 . set_ioapic_affinity_irq
0 +1048 1048 . acpi_processor_set_throttling
0 +1048 1048 . acpi_map_lsapic
0 +1040 1040 . store_interrupt_enable
0 +1040 1040 . set_msi_irq_affinity
0 +1040 1040 . set_ht_irq_affinity
0 +1032 1032 . store_error_count
0 +1032 1032 . show_error_count
0 +1032 1032 . setup_ioapic_dest
0 +1032 1032 . sched_setaffinity
0 +1032 1032 . physflat_send_IPI_allbutself
0 +1032 1032 . native_flush_tlb_others
0 +1032 1032 . move_masked_irq
0 +1032 1032 . flat_send_IPI_allbutself
0 +1024 1024 . pci_bus_show_cpuaffinity
0 +1024 1024 . machine_crash_shutdown
0 +1024 1024 . local_cpus_show
0 +1024 1024 . irq_complete_move
0 +1024 1024 . ioapic_retrigger_irq
0 +1024 1024 . fixup_irqs
0 +1024 1024 . create_irq
====== MemInfo ()
1 - 255-akpm2
2 - 4k-akpm2
.1. .2. ..final..
30146560 +786432 30932992 +2% Active
1018880 +64512 1083392 +6% Active(Node.0)
6517760 +132096 6649856 +2% Active(Node.1)
17465344 -12288 17453056 <1% AnonPages
2932736 +69632 3002368 +2% AnonPages(Node.0)
14532608 -81920 14450688 <1% AnonPages(Node.1)
5804032 +327680 6131712 +5% Buffers
57851904 +17252352 75104256 +29% Cached
10078793728 -5058560 10073735168 <1% CommitLimit
73453568 +1028096 74481664 +1% Committed_AS
184320 -184320 . -100% Dirty
20480 -20480 . -100% Dirty(Node.0)
163840 -163840 . -100% Dirty(Node.1)
3391488 +352256 3743744 +10% FilePages(Node.0)
60264448 +17227776 77492224 +28% FilePages(Node.1)
50900992 +16818176 67719168 +33% Inactive
561152 +41984 603136 +7% Inactive(Node.0)
12164096 +4162560 16326656 +34% Inactive(Node.1)
8847360 +16384 8863744 <1% Mapped
290816 +45056 335872 +15% Mapped(Node.0)
8556544 -28672 8527872 <1% Mapped(Node.1)
4014837760 -54091776 3960745984 -1% MemFree
2012188672 -16060416 1996128256 <1% MemFree(Node.0)
2002522112 -38031360 1964490752 -1% MemFree(Node.1)
4151279616 -10117120 4141162496 <1% MemTotal
134877184 +16060416 150937600 +11% MemUsed(Node.0)
143912960 +38031360 181944320 +26% MemUsed(Node.1)
2306048 -8192 2297856 <1% PageTables
872448 +32768 905216 +3% PageTables(Node.0)
1433600 -40960 1392640 -2% PageTables(Node.1)
8290304 +217088 8507392 +2% SReclaimable
1155072 -184320 970752 -15% SReclaimable(Node.0)
7135232 +401408 7536640 +5% SReclaimable(Node.1)
12480512 +11087872 23568384 +88% SUnreclaim
4730880 +6569984 11300864 +138% SUnreclaim(Node.0)
7749632 +4517888 12267520 +58% SUnreclaim(Node.1)
20770816 +11304960 32075776 +54% Slab
5885952 +6385664 12271616 +108% Slab(Node.0)
14884864 +4919296 19804160 +33% Slab(Node.1)
159670272 -4096 159666176 <1% VmallocUsed
23140846592 +33765376 23174611968 +0% Totals
Memory usage in a simulated 2cpu/1gb environment using the
default configuration and NR_CPUS=4096, MAX Nodes=512:
Memory: 1013440k/1048576k available
(3588k kernel code, 33728k reserved, 1962k data, 1212k init)
MemTotal: 1014652 kB
MemFree: 991364 kB
Buffers: 192 kB
Cached: 3436 kB
SwapCached: 0 kB
Active: 1636 kB
Inactive: 2648 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 20 kB
Writeback: 0 kB
AnonPages: 656 kB
Mapped: 1412 kB
Slab: 12752 kB
SReclaimable: 236 kB
SUnreclaim: 12516 kB
PageTables: 36 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
CommitLimit: 507324 kB
Committed_AS: 0 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 4896 kB
VmallocChunk: 34359733471 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
--
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 1/2] boot: increase stack size for kernel boot loader decompressor
2008-03-26 1:41 ` Mike Travis
@ 2008-03-26 1:41 ` Mike Travis
-1 siblings, 0 replies; 26+ messages in thread
From: Mike Travis @ 2008-03-26 1:41 UTC (permalink / raw)
To: Andrew Morton; +Cc: Ingo Molnar, linux-mm, linux-kernel
[-- Attachment #1: compressed-head_64 --]
[-- Type: text/plain, Size: 723 bytes --]
Increase stack size for the kernel bootloader decompressor. This is
needed to boot a kernel with NR_CPUS = 4096. I tested with 8k stack
size but that wasn't sufficient.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
Signed-off-by: Mike Travis <travis@sgi.com>
---
arch/x86/boot/compressed/head_64.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- linux-2.6.25-rc5.orig/arch/x86/boot/compressed/head_64.S
+++ linux-2.6.25-rc5/arch/x86/boot/compressed/head_64.S
@@ -314,5 +314,5 @@ gdt_end:
/* Stack for uncompression */
.balign 4
user_stack:
- .fill 4096,4,0
+ .fill 16384,4,0
user_stack_end:
--
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 1/2] boot: increase stack size for kernel boot loader decompressor
@ 2008-03-26 1:41 ` Mike Travis
0 siblings, 0 replies; 26+ messages in thread
From: Mike Travis @ 2008-03-26 1:41 UTC (permalink / raw)
To: Andrew Morton; +Cc: Ingo Molnar, linux-mm, linux-kernel
[-- Attachment #1: compressed-head_64 --]
[-- Type: text/plain, Size: 949 bytes --]
Increase stack size for the kernel bootloader decompressor. This is
needed to boot a kernel with NR_CPUS = 4096. I tested with 8k stack
size but that wasn't sufficient.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
Signed-off-by: Mike Travis <travis@sgi.com>
---
arch/x86/boot/compressed/head_64.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- linux-2.6.25-rc5.orig/arch/x86/boot/compressed/head_64.S
+++ linux-2.6.25-rc5/arch/x86/boot/compressed/head_64.S
@@ -314,5 +314,5 @@ gdt_end:
/* Stack for uncompression */
.balign 4
user_stack:
- .fill 4096,4,0
+ .fill 16384,4,0
user_stack_end:
--
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 2/2] x86: Modify Kconfig to allow up to 4096 cpus
2008-03-26 1:41 ` Mike Travis
@ 2008-03-26 1:41 ` Mike Travis
-1 siblings, 0 replies; 26+ messages in thread
From: Mike Travis @ 2008-03-26 1:41 UTC (permalink / raw)
To: Andrew Morton; +Cc: Ingo Molnar, linux-mm, linux-kernel
[-- Attachment #1: Kconfig --]
[-- Type: text/plain, Size: 1991 bytes --]
Increase the limit of NR_CPUS to 4096 and introduce a boolean
called "MAXSMP" which when set (e.g. "allyesconfig"), will set
NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
Signed-off-by: Mike Travis <travis@sgi.com>
---
arch/x86/Kconfig | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
--- linux.trees.git.orig/arch/x86/Kconfig
+++ linux.trees.git/arch/x86/Kconfig
@@ -522,16 +522,24 @@ config SWIOTLB
access 32-bits of memory can be used on systems with more than
3 GB of memory. If unsure, say Y.
+config MAXSMP
+ bool "Configure Maximum number of SMP Processors"
+ depends on X86_64 && SMP
+ default n
+ help
+ Configure maximum number of CPUS for this architecture.
+ If unsure, say N.
config NR_CPUS
- int "Maximum number of CPUs (2-255)"
- range 2 255
+ int "Maximum number of CPUs (2-4096)"
+ range 2 4096
depends on SMP
+ default "4096" if MAXSMP
default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
default "8"
help
This allows you to specify the maximum number of CPUs which this
- kernel will support. The maximum supported value is 255 and the
+ kernel will support. The maximum supported value is 4096 and the
minimum value which makes sense is 2.
This is purely to save memory - each supported CPU adds
@@ -918,12 +926,16 @@ config NUMA_EMU
number of nodes. This is only useful for debugging.
config NODES_SHIFT
- int "Max num nodes shift(1-15)"
+ int "Maximum NUMA Nodes (as a power of 2)"
range 1 15 if X86_64
+ default "9" if MAXSMP
default "6" if X86_64
default "4" if X86_NUMAQ
default "3"
depends on NEED_MULTIPLE_NODES
+ help
+ Specify the maximum number of NUMA Nodes available on the target
+ system. Increases memory reserved to accomodate various tables.
config HAVE_ARCH_BOOTMEM_NODE
def_bool y
--
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 2/2] x86: Modify Kconfig to allow up to 4096 cpus
@ 2008-03-26 1:41 ` Mike Travis
0 siblings, 0 replies; 26+ messages in thread
From: Mike Travis @ 2008-03-26 1:41 UTC (permalink / raw)
To: Andrew Morton; +Cc: Ingo Molnar, linux-mm, linux-kernel
[-- Attachment #1: Kconfig --]
[-- Type: text/plain, Size: 2217 bytes --]
Increase the limit of NR_CPUS to 4096 and introduce a boolean
called "MAXSMP" which when set (e.g. "allyesconfig"), will set
NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
Signed-off-by: Mike Travis <travis@sgi.com>
---
arch/x86/Kconfig | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
--- linux.trees.git.orig/arch/x86/Kconfig
+++ linux.trees.git/arch/x86/Kconfig
@@ -522,16 +522,24 @@ config SWIOTLB
access 32-bits of memory can be used on systems with more than
3 GB of memory. If unsure, say Y.
+config MAXSMP
+ bool "Configure Maximum number of SMP Processors"
+ depends on X86_64 && SMP
+ default n
+ help
+ Configure maximum number of CPUS for this architecture.
+ If unsure, say N.
config NR_CPUS
- int "Maximum number of CPUs (2-255)"
- range 2 255
+ int "Maximum number of CPUs (2-4096)"
+ range 2 4096
depends on SMP
+ default "4096" if MAXSMP
default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
default "8"
help
This allows you to specify the maximum number of CPUs which this
- kernel will support. The maximum supported value is 255 and the
+ kernel will support. The maximum supported value is 4096 and the
minimum value which makes sense is 2.
This is purely to save memory - each supported CPU adds
@@ -918,12 +926,16 @@ config NUMA_EMU
number of nodes. This is only useful for debugging.
config NODES_SHIFT
- int "Max num nodes shift(1-15)"
+ int "Maximum NUMA Nodes (as a power of 2)"
range 1 15 if X86_64
+ default "9" if MAXSMP
default "6" if X86_64
default "4" if X86_NUMAQ
default "3"
depends on NEED_MULTIPLE_NODES
+ help
+ Specify the maximum number of NUMA Nodes available on the target
+ system. Increases memory reserved to accomodate various tables.
config HAVE_ARCH_BOOTMEM_NODE
def_bool y
--
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 0/2] NR_CPUS: increase maximum NR_CPUS to 4096
2008-03-26 1:41 ` Mike Travis
@ 2008-03-26 6:19 ` Ingo Molnar
-1 siblings, 0 replies; 26+ messages in thread
From: Ingo Molnar @ 2008-03-26 6:19 UTC (permalink / raw)
To: Mike Travis; +Cc: Andrew Morton, linux-mm, linux-kernel
* Mike Travis <travis@sgi.com> wrote:
> Increases the limit of NR_CPUS to 4096 and introduces a boolean called
> "MAXSMP" which when set (e.g. "allyesconfig") will set NR_CPUS = 4096
> and NODES_SHIFT = 9 (512).
>
> I've been running this config (4k NR_CPUS, 512 Max Nodes) on an AMD
> box with 2 dual-cores and 4gb memory. I've also successfully booted
> it in a simulated 2cpus/1Gb environment.
cool!
this depends on the cpumask changes to work correctly (i.e. to boot at
all), right?
Ingo
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 0/2] NR_CPUS: increase maximum NR_CPUS to 4096
@ 2008-03-26 6:19 ` Ingo Molnar
0 siblings, 0 replies; 26+ messages in thread
From: Ingo Molnar @ 2008-03-26 6:19 UTC (permalink / raw)
To: Mike Travis; +Cc: Andrew Morton, linux-mm, linux-kernel
* Mike Travis <travis@sgi.com> wrote:
> Increases the limit of NR_CPUS to 4096 and introduces a boolean called
> "MAXSMP" which when set (e.g. "allyesconfig") will set NR_CPUS = 4096
> and NODES_SHIFT = 9 (512).
>
> I've been running this config (4k NR_CPUS, 512 Max Nodes) on an AMD
> box with 2 dual-cores and 4gb memory. I've also successfully booted
> it in a simulated 2cpus/1Gb environment.
cool!
this depends on the cpumask changes to work correctly (i.e. to boot at
all), right?
Ingo
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 0/2] NR_CPUS: increase maximum NR_CPUS to 4096
2008-03-26 6:19 ` Ingo Molnar
@ 2008-03-26 15:59 ` Mike Travis
-1 siblings, 0 replies; 26+ messages in thread
From: Mike Travis @ 2008-03-26 15:59 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Andrew Morton, linux-mm, linux-kernel
Ingo Molnar wrote:
> * Mike Travis <travis@sgi.com> wrote:
>
>> Increases the limit of NR_CPUS to 4096 and introduces a boolean called
>> "MAXSMP" which when set (e.g. "allyesconfig") will set NR_CPUS = 4096
>> and NODES_SHIFT = 9 (512).
>>
>> I've been running this config (4k NR_CPUS, 512 Max Nodes) on an AMD
>> box with 2 dual-cores and 4gb memory. I've also successfully booted
>> it in a simulated 2cpus/1Gb environment.
>
> cool!
>
> this depends on the cpumask changes to work correctly (i.e. to boot at
> all), right?
>
> Ingo
Yes, it overflows the stack quite quickly without the cpumask changes.
I didn't do any testing to see what's the minimal set of changes.
Thanks,
Mike
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 0/2] NR_CPUS: increase maximum NR_CPUS to 4096
@ 2008-03-26 15:59 ` Mike Travis
0 siblings, 0 replies; 26+ messages in thread
From: Mike Travis @ 2008-03-26 15:59 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Andrew Morton, linux-mm, linux-kernel
Ingo Molnar wrote:
> * Mike Travis <travis@sgi.com> wrote:
>
>> Increases the limit of NR_CPUS to 4096 and introduces a boolean called
>> "MAXSMP" which when set (e.g. "allyesconfig") will set NR_CPUS = 4096
>> and NODES_SHIFT = 9 (512).
>>
>> I've been running this config (4k NR_CPUS, 512 Max Nodes) on an AMD
>> box with 2 dual-cores and 4gb memory. I've also successfully booted
>> it in a simulated 2cpus/1Gb environment.
>
> cool!
>
> this depends on the cpumask changes to work correctly (i.e. to boot at
> all), right?
>
> Ingo
Yes, it overflows the stack quite quickly without the cpumask changes.
I didn't do any testing to see what's the minimal set of changes.
Thanks,
Mike
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] x86: Modify Kconfig to allow up to 4096 cpus
2008-03-26 1:41 ` Mike Travis
@ 2008-03-26 16:09 ` Adrian Bunk
-1 siblings, 0 replies; 26+ messages in thread
From: Adrian Bunk @ 2008-03-26 16:09 UTC (permalink / raw)
To: Mike Travis; +Cc: Andrew Morton, linux-mm, linux-kernel
On Tue, Mar 25, 2008 at 06:41:39PM -0700, Mike Travis wrote:
> Increase the limit of NR_CPUS to 4096 and introduce a boolean
> called "MAXSMP" which when set (e.g. "allyesconfig"), will set
> NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
I'm not really getting the point of MAXSMP - people should simply pick
their values, and when they want the maximum "(2-4096)" and "(1-15)"
already provide this information (except that your patch hides the
latter information from the user).
And with your patch, even with MAXSMP=y people could still set
NR_CPUS=7 and NODES_SHIFT=15 or whatever else they want...
More interesting would be why you want it to set NODES_SHIFT to
something less than the maximum value of 15. I'm getting the fact that
2^15 > 4096 and that 15 might be nonsensical high, but this sounds more
like requiring a patch to limit the range to 9?
>...
> --- linux.trees.git.orig/arch/x86/Kconfig
> +++ linux.trees.git/arch/x86/Kconfig
> @@ -522,16 +522,24 @@ config SWIOTLB
> access 32-bits of memory can be used on systems with more than
> 3 GB of memory. If unsure, say Y.
>
> +config MAXSMP
> + bool "Configure Maximum number of SMP Processors"
> + depends on X86_64 && SMP
> + default n
> + help
> + Configure maximum number of CPUS for this architecture.
> + If unsure, say N.
>
> config NR_CPUS
> - int "Maximum number of CPUs (2-255)"
> - range 2 255
> + int "Maximum number of CPUs (2-4096)"
> + range 2 4096
> depends on SMP
> + default "4096" if MAXSMP
> default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
> default "8"
> help
> This allows you to specify the maximum number of CPUs which this
> - kernel will support. The maximum supported value is 255 and the
> + kernel will support. The maximum supported value is 4096 and the
> minimum value which makes sense is 2.
>
> This is purely to save memory - each supported CPU adds
> @@ -918,12 +926,16 @@ config NUMA_EMU
> number of nodes. This is only useful for debugging.
>
> config NODES_SHIFT
> - int "Max num nodes shift(1-15)"
> + int "Maximum NUMA Nodes (as a power of 2)"
> range 1 15 if X86_64
> + default "9" if MAXSMP
> default "6" if X86_64
> default "4" if X86_NUMAQ
> default "3"
> depends on NEED_MULTIPLE_NODES
> + help
> + Specify the maximum number of NUMA Nodes available on the target
> + system. Increases memory reserved to accomodate various tables.
>
> config HAVE_ARCH_BOOTMEM_NODE
> def_bool y
>
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] x86: Modify Kconfig to allow up to 4096 cpus
@ 2008-03-26 16:09 ` Adrian Bunk
0 siblings, 0 replies; 26+ messages in thread
From: Adrian Bunk @ 2008-03-26 16:09 UTC (permalink / raw)
To: Mike Travis; +Cc: Andrew Morton, linux-mm, linux-kernel
On Tue, Mar 25, 2008 at 06:41:39PM -0700, Mike Travis wrote:
> Increase the limit of NR_CPUS to 4096 and introduce a boolean
> called "MAXSMP" which when set (e.g. "allyesconfig"), will set
> NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
I'm not really getting the point of MAXSMP - people should simply pick
their values, and when they want the maximum "(2-4096)" and "(1-15)"
already provide this information (except that your patch hides the
latter information from the user).
And with your patch, even with MAXSMP=y people could still set
NR_CPUS=7 and NODES_SHIFT=15 or whatever else they want...
More interesting would be why you want it to set NODES_SHIFT to
something less than the maximum value of 15. I'm getting the fact that
2^15 > 4096 and that 15 might be nonsensical high, but this sounds more
like requiring a patch to limit the range to 9?
>...
> --- linux.trees.git.orig/arch/x86/Kconfig
> +++ linux.trees.git/arch/x86/Kconfig
> @@ -522,16 +522,24 @@ config SWIOTLB
> access 32-bits of memory can be used on systems with more than
> 3 GB of memory. If unsure, say Y.
>
> +config MAXSMP
> + bool "Configure Maximum number of SMP Processors"
> + depends on X86_64 && SMP
> + default n
> + help
> + Configure maximum number of CPUS for this architecture.
> + If unsure, say N.
>
> config NR_CPUS
> - int "Maximum number of CPUs (2-255)"
> - range 2 255
> + int "Maximum number of CPUs (2-4096)"
> + range 2 4096
> depends on SMP
> + default "4096" if MAXSMP
> default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
> default "8"
> help
> This allows you to specify the maximum number of CPUs which this
> - kernel will support. The maximum supported value is 255 and the
> + kernel will support. The maximum supported value is 4096 and the
> minimum value which makes sense is 2.
>
> This is purely to save memory - each supported CPU adds
> @@ -918,12 +926,16 @@ config NUMA_EMU
> number of nodes. This is only useful for debugging.
>
> config NODES_SHIFT
> - int "Max num nodes shift(1-15)"
> + int "Maximum NUMA Nodes (as a power of 2)"
> range 1 15 if X86_64
> + default "9" if MAXSMP
> default "6" if X86_64
> default "4" if X86_NUMAQ
> default "3"
> depends on NEED_MULTIPLE_NODES
> + help
> + Specify the maximum number of NUMA Nodes available on the target
> + system. Increases memory reserved to accomodate various tables.
>
> config HAVE_ARCH_BOOTMEM_NODE
> def_bool y
>
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] x86: Modify Kconfig to allow up to 4096 cpus
2008-03-26 16:09 ` Adrian Bunk
@ 2008-03-26 16:31 ` Mike Travis
-1 siblings, 0 replies; 26+ messages in thread
From: Mike Travis @ 2008-03-26 16:31 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, linux-mm, linux-kernel
Adrian Bunk wrote:
> On Tue, Mar 25, 2008 at 06:41:39PM -0700, Mike Travis wrote:
>> Increase the limit of NR_CPUS to 4096 and introduce a boolean
>> called "MAXSMP" which when set (e.g. "allyesconfig"), will set
>> NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
>
>
> I'm not really getting the point of MAXSMP - people should simply pick
> their values, and when they want the maximum "(2-4096)" and "(1-15)"
> already provide this information (except that your patch hides the
> latter information from the user).
>
> And with your patch, even with MAXSMP=y people could still set
> NR_CPUS=7 and NODES_SHIFT=15 or whatever else they want...
>
> More interesting would be why you want it to set NODES_SHIFT to
> something less than the maximum value of 15. I'm getting the fact that
> 2^15 > 4096 and that 15 might be nonsensical high, but this sounds more
> like requiring a patch to limit the range to 9?
I guess the main effect is that "MAXSMP" represents what's really
usable for an architecture based on other factors. The limit of
NODES_SHIFT = 15 is that it's represented in some places as a signed
16-bit value, so 15 is the hard limit without coding changes, not
an architecture limit.
Thanks,
Mike
>
>
>> ...
>> --- linux.trees.git.orig/arch/x86/Kconfig
>> +++ linux.trees.git/arch/x86/Kconfig
>> @@ -522,16 +522,24 @@ config SWIOTLB
>> access 32-bits of memory can be used on systems with more than
>> 3 GB of memory. If unsure, say Y.
>>
>> +config MAXSMP
>> + bool "Configure Maximum number of SMP Processors"
>> + depends on X86_64 && SMP
>> + default n
>> + help
>> + Configure maximum number of CPUS for this architecture.
>> + If unsure, say N.
>>
>> config NR_CPUS
>> - int "Maximum number of CPUs (2-255)"
>> - range 2 255
>> + int "Maximum number of CPUs (2-4096)"
>> + range 2 4096
>> depends on SMP
>> + default "4096" if MAXSMP
>> default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
>> default "8"
>> help
>> This allows you to specify the maximum number of CPUs which this
>> - kernel will support. The maximum supported value is 255 and the
>> + kernel will support. The maximum supported value is 4096 and the
>> minimum value which makes sense is 2.
>>
>> This is purely to save memory - each supported CPU adds
>> @@ -918,12 +926,16 @@ config NUMA_EMU
>> number of nodes. This is only useful for debugging.
>>
>> config NODES_SHIFT
>> - int "Max num nodes shift(1-15)"
>> + int "Maximum NUMA Nodes (as a power of 2)"
>> range 1 15 if X86_64
>> + default "9" if MAXSMP
>> default "6" if X86_64
>> default "4" if X86_NUMAQ
>> default "3"
>> depends on NEED_MULTIPLE_NODES
>> + help
>> + Specify the maximum number of NUMA Nodes available on the target
>> + system. Increases memory reserved to accomodate various tables.
>>
>> config HAVE_ARCH_BOOTMEM_NODE
>> def_bool y
>>
>
> cu
> Adrian
>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] x86: Modify Kconfig to allow up to 4096 cpus
@ 2008-03-26 16:31 ` Mike Travis
0 siblings, 0 replies; 26+ messages in thread
From: Mike Travis @ 2008-03-26 16:31 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, linux-mm, linux-kernel
Adrian Bunk wrote:
> On Tue, Mar 25, 2008 at 06:41:39PM -0700, Mike Travis wrote:
>> Increase the limit of NR_CPUS to 4096 and introduce a boolean
>> called "MAXSMP" which when set (e.g. "allyesconfig"), will set
>> NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
>
>
> I'm not really getting the point of MAXSMP - people should simply pick
> their values, and when they want the maximum "(2-4096)" and "(1-15)"
> already provide this information (except that your patch hides the
> latter information from the user).
>
> And with your patch, even with MAXSMP=y people could still set
> NR_CPUS=7 and NODES_SHIFT=15 or whatever else they want...
>
> More interesting would be why you want it to set NODES_SHIFT to
> something less than the maximum value of 15. I'm getting the fact that
> 2^15 > 4096 and that 15 might be nonsensical high, but this sounds more
> like requiring a patch to limit the range to 9?
I guess the main effect is that "MAXSMP" represents what's really
usable for an architecture based on other factors. The limit of
NODES_SHIFT = 15 is that it's represented in some places as a signed
16-bit value, so 15 is the hard limit without coding changes, not
an architecture limit.
Thanks,
Mike
>
>
>> ...
>> --- linux.trees.git.orig/arch/x86/Kconfig
>> +++ linux.trees.git/arch/x86/Kconfig
>> @@ -522,16 +522,24 @@ config SWIOTLB
>> access 32-bits of memory can be used on systems with more than
>> 3 GB of memory. If unsure, say Y.
>>
>> +config MAXSMP
>> + bool "Configure Maximum number of SMP Processors"
>> + depends on X86_64 && SMP
>> + default n
>> + help
>> + Configure maximum number of CPUS for this architecture.
>> + If unsure, say N.
>>
>> config NR_CPUS
>> - int "Maximum number of CPUs (2-255)"
>> - range 2 255
>> + int "Maximum number of CPUs (2-4096)"
>> + range 2 4096
>> depends on SMP
>> + default "4096" if MAXSMP
>> default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
>> default "8"
>> help
>> This allows you to specify the maximum number of CPUs which this
>> - kernel will support. The maximum supported value is 255 and the
>> + kernel will support. The maximum supported value is 4096 and the
>> minimum value which makes sense is 2.
>>
>> This is purely to save memory - each supported CPU adds
>> @@ -918,12 +926,16 @@ config NUMA_EMU
>> number of nodes. This is only useful for debugging.
>>
>> config NODES_SHIFT
>> - int "Max num nodes shift(1-15)"
>> + int "Maximum NUMA Nodes (as a power of 2)"
>> range 1 15 if X86_64
>> + default "9" if MAXSMP
>> default "6" if X86_64
>> default "4" if X86_NUMAQ
>> default "3"
>> depends on NEED_MULTIPLE_NODES
>> + help
>> + Specify the maximum number of NUMA Nodes available on the target
>> + system. Increases memory reserved to accomodate various tables.
>>
>> config HAVE_ARCH_BOOTMEM_NODE
>> def_bool y
>>
>
> cu
> Adrian
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] x86: Modify Kconfig to allow up to 4096 cpus
2008-03-26 16:31 ` Mike Travis
@ 2008-03-26 16:55 ` Adrian Bunk
-1 siblings, 0 replies; 26+ messages in thread
From: Adrian Bunk @ 2008-03-26 16:55 UTC (permalink / raw)
To: Mike Travis; +Cc: Andrew Morton, linux-mm, linux-kernel
On Wed, Mar 26, 2008 at 09:31:22AM -0700, Mike Travis wrote:
> Adrian Bunk wrote:
> > On Tue, Mar 25, 2008 at 06:41:39PM -0700, Mike Travis wrote:
> >> Increase the limit of NR_CPUS to 4096 and introduce a boolean
> >> called "MAXSMP" which when set (e.g. "allyesconfig"), will set
> >> NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
> >
> >
> > I'm not really getting the point of MAXSMP - people should simply pick
> > their values, and when they want the maximum "(2-4096)" and "(1-15)"
> > already provide this information (except that your patch hides the
> > latter information from the user).
> >
> > And with your patch, even with MAXSMP=y people could still set
> > NR_CPUS=7 and NODES_SHIFT=15 or whatever else they want...
> >
> > More interesting would be why you want it to set NODES_SHIFT to
> > something less than the maximum value of 15. I'm getting the fact that
> > 2^15 > 4096 and that 15 might be nonsensical high, but this sounds more
> > like requiring a patch to limit the range to 9?
>
> I guess the main effect is that "MAXSMP" represents what's really
> usable for an architecture based on other factors. The limit of
> NODES_SHIFT = 15 is that it's represented in some places as a signed
> 16-bit value, so 15 is the hard limit without coding changes, not
> an architecture limit.
This is the x86-specific Kconfig file that presents the x86 specific
limits to the users.
If NODES_SHIFT=15 is offered to the user although it's higher than the
current architecture limit on x86 then this is simply a bug that should
be fixed.
> Thanks,
> Mike
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] x86: Modify Kconfig to allow up to 4096 cpus
@ 2008-03-26 16:55 ` Adrian Bunk
0 siblings, 0 replies; 26+ messages in thread
From: Adrian Bunk @ 2008-03-26 16:55 UTC (permalink / raw)
To: Mike Travis; +Cc: Andrew Morton, linux-mm, linux-kernel
On Wed, Mar 26, 2008 at 09:31:22AM -0700, Mike Travis wrote:
> Adrian Bunk wrote:
> > On Tue, Mar 25, 2008 at 06:41:39PM -0700, Mike Travis wrote:
> >> Increase the limit of NR_CPUS to 4096 and introduce a boolean
> >> called "MAXSMP" which when set (e.g. "allyesconfig"), will set
> >> NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
> >
> >
> > I'm not really getting the point of MAXSMP - people should simply pick
> > their values, and when they want the maximum "(2-4096)" and "(1-15)"
> > already provide this information (except that your patch hides the
> > latter information from the user).
> >
> > And with your patch, even with MAXSMP=y people could still set
> > NR_CPUS=7 and NODES_SHIFT=15 or whatever else they want...
> >
> > More interesting would be why you want it to set NODES_SHIFT to
> > something less than the maximum value of 15. I'm getting the fact that
> > 2^15 > 4096 and that 15 might be nonsensical high, but this sounds more
> > like requiring a patch to limit the range to 9?
>
> I guess the main effect is that "MAXSMP" represents what's really
> usable for an architecture based on other factors. The limit of
> NODES_SHIFT = 15 is that it's represented in some places as a signed
> 16-bit value, so 15 is the hard limit without coding changes, not
> an architecture limit.
This is the x86-specific Kconfig file that presents the x86 specific
limits to the users.
If NODES_SHIFT=15 is offered to the user although it's higher than the
current architecture limit on x86 then this is simply a bug that should
be fixed.
> Thanks,
> Mike
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] x86: Modify Kconfig to allow up to 4096 cpus
2008-03-26 16:31 ` Mike Travis
@ 2008-03-26 19:16 ` Christoph Lameter
-1 siblings, 0 replies; 26+ messages in thread
From: Christoph Lameter @ 2008-03-26 19:16 UTC (permalink / raw)
To: Mike Travis; +Cc: Adrian Bunk, Andrew Morton, linux-mm, linux-kernel
On Wed, 26 Mar 2008, Mike Travis wrote:
> I guess the main effect is that "MAXSMP" represents what's really
> usable for an architecture based on other factors. The limit of
> NODES_SHIFT = 15 is that it's represented in some places as a signed
> 16-bit value, so 15 is the hard limit without coding changes, not
> an architecture limit.
NODES_SHIFT also controls how many page flag bits are set aside for the
node number. If you limit x86_64 to 512 nodes then lets keep this at 9.
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] x86: Modify Kconfig to allow up to 4096 cpus
@ 2008-03-26 19:16 ` Christoph Lameter
0 siblings, 0 replies; 26+ messages in thread
From: Christoph Lameter @ 2008-03-26 19:16 UTC (permalink / raw)
To: Mike Travis; +Cc: Adrian Bunk, Andrew Morton, linux-mm, linux-kernel
On Wed, 26 Mar 2008, Mike Travis wrote:
> I guess the main effect is that "MAXSMP" represents what's really
> usable for an architecture based on other factors. The limit of
> NODES_SHIFT = 15 is that it's represented in some places as a signed
> 16-bit value, so 15 is the hard limit without coding changes, not
> an architecture limit.
NODES_SHIFT also controls how many page flag bits are set aside for the
node number. If you limit x86_64 to 512 nodes then lets keep this at 9.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] x86: Modify Kconfig to allow up to 4096 cpus
2008-03-26 1:41 ` Mike Travis
@ 2008-03-26 19:28 ` Yinghai Lu
-1 siblings, 0 replies; 26+ messages in thread
From: Yinghai Lu @ 2008-03-26 19:28 UTC (permalink / raw)
To: Mike Travis; +Cc: Andrew Morton, Ingo Molnar, linux-mm, linux-kernel
On Tue, Mar 25, 2008 at 6:41 PM, Mike Travis <travis@sgi.com> wrote:
> Increase the limit of NR_CPUS to 4096 and introduce a boolean
> called "MAXSMP" which when set (e.g. "allyesconfig"), will set
> NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
>
> Based on:
> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
> git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
>
> Signed-off-by: Mike Travis <travis@sgi.com>
> ---
> arch/x86/Kconfig | 20 ++++++++++++++++----
> 1 file changed, 16 insertions(+), 4 deletions(-)
>
> --- linux.trees.git.orig/arch/x86/Kconfig
> +++ linux.trees.git/arch/x86/Kconfig
> @@ -522,16 +522,24 @@ config SWIOTLB
> access 32-bits of memory can be used on systems with more than
> 3 GB of memory. If unsure, say Y.
>
> +config MAXSMP
> + bool "Configure Maximum number of SMP Processors"
> + depends on X86_64 && SMP
> + default n
> + help
> + Configure maximum number of CPUS for this architecture.
> + If unsure, say N.
>
> config NR_CPUS
> - int "Maximum number of CPUs (2-255)"
> - range 2 255
> + int "Maximum number of CPUs (2-4096)"
> + range 2 4096
> depends on SMP
> + default "4096" if MAXSMP
> default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
> default "8"
> help
> This allows you to specify the maximum number of CPUs which this
> - kernel will support. The maximum supported value is 255 and the
> + kernel will support. The maximum supported value is 4096 and the
> minimum value which makes sense is 2.
>
> This is purely to save memory - each supported CPU adds
or put
if MAXSMP around NR_CPUS...
YH
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] x86: Modify Kconfig to allow up to 4096 cpus
@ 2008-03-26 19:28 ` Yinghai Lu
0 siblings, 0 replies; 26+ messages in thread
From: Yinghai Lu @ 2008-03-26 19:28 UTC (permalink / raw)
To: Mike Travis; +Cc: Andrew Morton, Ingo Molnar, linux-mm, linux-kernel
On Tue, Mar 25, 2008 at 6:41 PM, Mike Travis <travis@sgi.com> wrote:
> Increase the limit of NR_CPUS to 4096 and introduce a boolean
> called "MAXSMP" which when set (e.g. "allyesconfig"), will set
> NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
>
> Based on:
> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
> git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
>
> Signed-off-by: Mike Travis <travis@sgi.com>
> ---
> arch/x86/Kconfig | 20 ++++++++++++++++----
> 1 file changed, 16 insertions(+), 4 deletions(-)
>
> --- linux.trees.git.orig/arch/x86/Kconfig
> +++ linux.trees.git/arch/x86/Kconfig
> @@ -522,16 +522,24 @@ config SWIOTLB
> access 32-bits of memory can be used on systems with more than
> 3 GB of memory. If unsure, say Y.
>
> +config MAXSMP
> + bool "Configure Maximum number of SMP Processors"
> + depends on X86_64 && SMP
> + default n
> + help
> + Configure maximum number of CPUS for this architecture.
> + If unsure, say N.
>
> config NR_CPUS
> - int "Maximum number of CPUs (2-255)"
> - range 2 255
> + int "Maximum number of CPUs (2-4096)"
> + range 2 4096
> depends on SMP
> + default "4096" if MAXSMP
> default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
> default "8"
> help
> This allows you to specify the maximum number of CPUs which this
> - kernel will support. The maximum supported value is 255 and the
> + kernel will support. The maximum supported value is 4096 and the
> minimum value which makes sense is 2.
>
> This is purely to save memory - each supported CPU adds
or put
if MAXSMP around NR_CPUS...
YH
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] x86: Modify Kconfig to allow up to 4096 cpus
2008-03-26 16:55 ` Adrian Bunk
@ 2008-03-27 15:06 ` Mike Travis
-1 siblings, 0 replies; 26+ messages in thread
From: Mike Travis @ 2008-03-27 15:06 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, linux-mm, linux-kernel
Adrian Bunk wrote:
> On Wed, Mar 26, 2008 at 09:31:22AM -0700, Mike Travis wrote:
>> Adrian Bunk wrote:
>>> On Tue, Mar 25, 2008 at 06:41:39PM -0700, Mike Travis wrote:
>>>> Increase the limit of NR_CPUS to 4096 and introduce a boolean
>>>> called "MAXSMP" which when set (e.g. "allyesconfig"), will set
>>>> NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
>>>
>>> I'm not really getting the point of MAXSMP - people should simply pick
>>> their values, and when they want the maximum "(2-4096)" and "(1-15)"
>>> already provide this information (except that your patch hides the
>>> latter information from the user).
>>>
>>> And with your patch, even with MAXSMP=y people could still set
>>> NR_CPUS=7 and NODES_SHIFT=15 or whatever else they want...
>>>
>>> More interesting would be why you want it to set NODES_SHIFT to
>>> something less than the maximum value of 15. I'm getting the fact that
>>> 2^15 > 4096 and that 15 might be nonsensical high, but this sounds more
>>> like requiring a patch to limit the range to 9?
>> I guess the main effect is that "MAXSMP" represents what's really
>> usable for an architecture based on other factors. The limit of
>> NODES_SHIFT = 15 is that it's represented in some places as a signed
>> 16-bit value, so 15 is the hard limit without coding changes, not
>> an architecture limit.
>
>
> This is the x86-specific Kconfig file that presents the x86 specific
> limits to the users.
>
> If NODES_SHIFT=15 is offered to the user although it's higher than the
> current architecture limit on x86 then this is simply a bug that should
> be fixed.
>
>
>> Thanks,
>> Mike
>
> cu
> Adrian
>
Ok, I'll modify it in the next version.
Thanks!
Mike
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/2] x86: Modify Kconfig to allow up to 4096 cpus
@ 2008-03-27 15:06 ` Mike Travis
0 siblings, 0 replies; 26+ messages in thread
From: Mike Travis @ 2008-03-27 15:06 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, linux-mm, linux-kernel
Adrian Bunk wrote:
> On Wed, Mar 26, 2008 at 09:31:22AM -0700, Mike Travis wrote:
>> Adrian Bunk wrote:
>>> On Tue, Mar 25, 2008 at 06:41:39PM -0700, Mike Travis wrote:
>>>> Increase the limit of NR_CPUS to 4096 and introduce a boolean
>>>> called "MAXSMP" which when set (e.g. "allyesconfig"), will set
>>>> NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
>>>
>>> I'm not really getting the point of MAXSMP - people should simply pick
>>> their values, and when they want the maximum "(2-4096)" and "(1-15)"
>>> already provide this information (except that your patch hides the
>>> latter information from the user).
>>>
>>> And with your patch, even with MAXSMP=y people could still set
>>> NR_CPUS=7 and NODES_SHIFT=15 or whatever else they want...
>>>
>>> More interesting would be why you want it to set NODES_SHIFT to
>>> something less than the maximum value of 15. I'm getting the fact that
>>> 2^15 > 4096 and that 15 might be nonsensical high, but this sounds more
>>> like requiring a patch to limit the range to 9?
>> I guess the main effect is that "MAXSMP" represents what's really
>> usable for an architecture based on other factors. The limit of
>> NODES_SHIFT = 15 is that it's represented in some places as a signed
>> 16-bit value, so 15 is the hard limit without coding changes, not
>> an architecture limit.
>
>
> This is the x86-specific Kconfig file that presents the x86 specific
> limits to the users.
>
> If NODES_SHIFT=15 is offered to the user although it's higher than the
> current architecture limit on x86 then this is simply a bug that should
> be fixed.
>
>
>> Thanks,
>> Mike
>
> cu
> Adrian
>
Ok, I'll modify it in the next version.
Thanks!
Mike
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 0/2] NR_CPUS: increase maximum NR_CPUS to 4096
2008-04-08 22:03 ` Mike Travis
@ 2008-04-08 22:32 ` Yinghai Lu
0 siblings, 0 replies; 26+ messages in thread
From: Yinghai Lu @ 2008-04-08 22:32 UTC (permalink / raw)
To: Mike Travis
Cc: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1373 bytes --]
On Tue, Apr 8, 2008 at 3:03 PM, Mike Travis <travis@sgi.com> wrote:
> Yinghai Lu wrote:
> > On Fri, Apr 4, 2008 at 6:30 PM, Mike Travis <travis@sgi.com> wrote:
> >> * Increases the limit of NR_CPUS to 4096 and introduces a
> >> boolean called "MAXSMP" which when set (e.g. "allyesconfig")
> >> will set NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
> >>
> >> I've been running this config (4k NR_CPUS, 512 Max Nodes)
> >> on an AMD box with 2 dual-cores and 4gb memory as well as an
> >> Intel box with 4 single-core cpus and 8Mb. I've also
> >> successfully booted it in a simulated 2cpus/1Gb environment.
> >>
> >> Based on:
> >> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
> >> + x86/latest .../x86/linux-2.6-x86.git
> >> + sched-devel/latest .../mingo/linux-2.6-sched-devel.git
> >>
> >> Signed-off-by: Mike Travis <travis@sgi.com>
> >
> > got
>
> Hi Yinghai,
>
> Thanks for the feedback! Would you send me your config file and
> other details (like cpu type/mem size/etc.) and I'll attempt
> to reproduce the failure.
>
> (My problem is that only the AMD box is a real "workstation", the
> Intel box is a dual quad-cpu server so it's really deficient in I/O.)
>
AMD quadcore eight sockets and 256G RAM
if I set NR_CPUS to 128 instead of 4096 it will be ok.
YH
[-- Attachment #2: config.4096 --]
[-- Type: application/octet-stream, Size: 48769 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc8
# Tue Apr 8 15:33:19 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-smp"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_TASK_XACCT is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CPUSETS=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="/home/yhlu/xx/xx/kernel/default-files /home/yhlu/xx/xx/kernel/root"
CONFIG_INITRAMFS_ROOT_UID=0
CONFIG_INITRAMFS_ROOT_GID=0
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_MARKERS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_MEMTEST_BOOTPARAM=y
CONFIG_MEMTEST_BOOTPARAM_VALUE=0
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=4096
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_X86_PAT is not set
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR_ALL=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x200000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_SYSFS_POWER=y
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=y
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_MVSAS=y
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_SCSI_LPFC=y
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SRP=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SVW=y
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SERVERWORKS=y
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_MULTIPATH_EMC=y
CONFIG_DM_MULTIPATH_RDAC=y
CONFIG_DM_MULTIPATH_HP=y
CONFIG_DM_DELAY=y
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LAN=y
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
#
# Controllers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=y
#
# Protocols
#
CONFIG_IEEE1394_VIDEO1394=y
CONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=y
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
CONFIG_MACVLAN=y
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
CONFIG_VETH=y
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_E1000E=y
CONFIG_E1000E_ENABLED=y
# CONFIG_IP1000 is not set
CONFIG_IGB=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_BNX2=y
CONFIG_QLA3XXX=y
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
CONFIG_IXGBE=y
CONFIG_IXGB=y
# CONFIG_IXGB_NAPI is not set
# CONFIG_S2IO is not set
CONFIG_MYRI10GE=y
CONFIG_NETXEN_NIC=y
CONFIG_NIU=y
CONFIG_MLX4_CORE=y
CONFIG_MLX4_DEBUG=y
# CONFIG_TEHUTI is not set
CONFIG_BNX2X=y
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
# CONFIG_USB_NET_CDCETHER is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_WAN is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_NET_FC=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_NVRAM=y
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
CONFIG_TCG_INFINEON=y
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=y
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
CONFIG_SENSORS_MAX6875=y
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=y
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
CONFIG_SENSORS_ADM1026=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
CONFIG_SENSORS_K8TEMP=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_I5K_AMB=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
# CONFIG_VIDEO_SELECT is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=y
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# SPI devices
#
#
# USB devices
#
CONFIG_SND_USB_AUDIO=y
# CONFIG_SND_USB_USX2Y is not set
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y
#
# System on Chip audio support
#
CONFIG_SND_SOC=y
#
# SoC Audio support for SuperH
#
#
# ALSA SoC audio for Freescale SOCs
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
CONFIG_USB_STORAGE_ISD200=y
# CONFIG_USB_STORAGE_DPCM is not set
CONFIG_USB_STORAGE_USBAT=y
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
CONFIG_USB_SERIAL_DEBUG=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=y
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=y
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_WBSD=y
CONFIG_MMC_TIFM_SD=y
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_CLEVO_MAIL is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=y
CONFIG_INFINIBAND_AMSO1100=y
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_MLX4_INFINIBAND=y
# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_ISER=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
#
# Userspace I/O
#
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_NOLOCK=y
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_XPRT_RDMA=y
CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_LKDTM=m
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_SAMPLES=y
CONFIG_SAMPLE_MARKERS=m
CONFIG_SAMPLE_KOBJECT=m
# CONFIG_SAMPLE_KPROBES is not set
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_NONPROMISC_DEVMEM=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_X86_PTDUMP=y
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DIRECT_GBPAGES is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_X86_MPPARSE=y
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_MMIOTRACE is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
CONFIG_KVM_AMD=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 0/2] NR_CPUS: increase maximum NR_CPUS to 4096
2008-04-08 21:53 ` Yinghai Lu
@ 2008-04-08 22:03 ` Mike Travis
2008-04-08 22:32 ` Yinghai Lu
0 siblings, 1 reply; 26+ messages in thread
From: Mike Travis @ 2008-04-08 22:03 UTC (permalink / raw)
To: Yinghai Lu
Cc: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
linux-kernel
Yinghai Lu wrote:
> On Fri, Apr 4, 2008 at 6:30 PM, Mike Travis <travis@sgi.com> wrote:
>> * Increases the limit of NR_CPUS to 4096 and introduces a
>> boolean called "MAXSMP" which when set (e.g. "allyesconfig")
>> will set NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
>>
>> I've been running this config (4k NR_CPUS, 512 Max Nodes)
>> on an AMD box with 2 dual-cores and 4gb memory as well as an
>> Intel box with 4 single-core cpus and 8Mb. I've also
>> successfully booted it in a simulated 2cpus/1Gb environment.
>>
>> Based on:
>> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
>> + x86/latest .../x86/linux-2.6-x86.git
>> + sched-devel/latest .../mingo/linux-2.6-sched-devel.git
>>
>> Signed-off-by: Mike Travis <travis@sgi.com>
>
> got
Hi Yinghai,
Thanks for the feedback! Would you send me your config file and
other details (like cpu type/mem size/etc.) and I'll attempt
to reproduce the failure.
(My problem is that only the AMD box is a real "workstation", the
Intel box is a dual quad-cpu server so it's really deficient in I/O.)
Thanks,
Mike
>
> ------------[ cut here ]------------
> WARNING: at kernel/sched_fair.c:815 hrtick_start_fair+0x69/0x156()
> Modules linked in:
> Pid: 1, comm: swapper Not tainted
> 2.6.25-rc8-x86-latest.git-smp-01033-ga39ae31-dirty #77
>
> Call Trace:
> [<ffffffff802596ce>] warn_on_slowpath+0x67/0x8e
> [<ffffffff8024b266>] hrtick_start_fair+0x69/0x156
> [<ffffffff8024a619>] ? dequeue_entity+0x2a/0xf8
> [<ffffffff8025547d>] dequeue_task_fair+0x5f/0x7e
> [<ffffffff80248ea3>] dequeue_task+0x22/0x44
> [<ffffffff80248efe>] deactivate_task+0x39/0x69
> [<ffffffff80a57c31>] schedule+0x1b9/0x5c5
> [<ffffffff80270dff>] ? autoremove_wake_function+0x20/0x5e
> [<ffffffff80a58338>] schedule_timeout+0x31/0xd7
> [<ffffffff8024db1a>] ? __wake_up+0x52/0x75
> [<ffffffff80a578a3>] wait_for_common+0x103/0x189
> [<ffffffff8024f29b>] ? default_wake_function+0x0/0x36
> [<ffffffff80a57a62>] wait_for_completion+0x2b/0x41
> [<ffffffff8026c0d2>] call_usermodehelper_exec+0x87/0xe5
> [<ffffffff80561073>] kobject_uevent_env+0x3d0/0x424
> [<ffffffff805610e5>] kobject_uevent+0x1e/0x34
> [<ffffffff805f2dbd>] device_add+0x2f9/0x494
> [<ffffffff805f2f80>] device_register+0x28/0x43
> [<ffffffff80577abf>] pcie_port_device_register+0x3f1/0x43e
> [<ffffffff80972165>] ? pcibios_set_master+0x8d/0xa8
> [<ffffffff80a24a1c>] pcie_portdrv_probe+0x79/0xbb
> [<ffffffff80574173>] pci_call_probe+0xe5/0x146
> [<ffffffff80574331>] pci_device_probe+0x64/0xa2
> [<ffffffff805f5946>] driver_probe_device+0xcf/0x16d
> [<ffffffff8031d708>] ? sysfs_addrm_finish+0x2f/0x22b
> [<ffffffff805f5b0b>] ? __driver_attach+0x0/0xbe
> [<ffffffff805f5b79>] __driver_attach+0x6e/0xbe
> [<ffffffff805f4999>] bus_for_each_dev+0x5e/0xa2
> [<ffffffff805f571f>] driver_attach+0x2f/0x45
> [<ffffffff805f5430>] bus_add_driver+0xc6/0x226
> [<ffffffff805f45a4>] ? bus_put+0x29/0x3f
> [<ffffffff805f5e66>] driver_register+0x6d/0xfc
> [<ffffffff805745fa>] __pci_register_driver+0x62/0xb0
> [<ffffffff818b25db>] pcie_portdrv_init+0x4a/0x72
> [<ffffffff81890bcf>] kernel_init+0x1b4/0x340
> [<ffffffff80225308>] child_rip+0xa/0x12
> [<ffffffff81890a1b>] ? kernel_init+0x0/0x340
> [<ffffffff802252fe>] ? child_rip+0x0/0x12
>
> ---[ end trace e26645195698f5cf ]---
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000148
> IP: [<ffffffff8024b3cf>] pick_next_task_fair+0x7c/0xbb
> PGD 0
> Oops: 0000 [1] SMP
> CPU 28
> Modules linked in:
> Pid: 1, comm: swapper Not tainted
> 2.6.25-rc8-x86-latest.git-smp-01033-ga39ae31-dirty #77
> RIP: 0010:[<ffffffff8024b3cf>] [<ffffffff8024b3cf>]
> pick_next_task_fair+0x7c/0xbb
> RSP: 0018:ffff81081cc5cd70 EFLAGS: 00010046
> RAX: 0000000000000000 RBX: ffff81383c21a280 RCX: 0000000000000000
> RDX: ffff81383c224080 RSI: ffff81383c224080 RDI: 0000000063e15417
> RBP: ffff81081cc5cda0 R08: 0000000000000000 R09: ffff81383c224108
> R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
> R13: ffff81383c224080 R14: ffff81383c224080 R15: 000000000000001c
> FS: 0000000000000000(0000) GS:ffff81401cc3c600(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000148 CR3: 0000000000201000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process swapper (pid: 1, threadinfo ffff81081cc5c000, task ffff81401cc52000)
> Stack: ffff81081cc5cda0 0000000063e15417 ffffffff80a81840 0000000000000000
> 00000000fffeecfd ffff81383c224080 ffff81081cc5ce70 ffffffff80a57d28
> ffff81081cc5ce00 ffff81081cc5ce20 ffffffff81963080 ffffffff81963080
> Call Trace:
> [<ffffffff80a57d28>] schedule+0x2b0/0x5c5
> [<ffffffff80270dff>] ? autoremove_wake_function+0x20/0x5e
> [<ffffffff80a58338>] schedule_timeout+0x31/0xd7
> [<ffffffff8024db1a>] ? __wake_up+0x52/0x75
> [<ffffffff80a578a3>] wait_for_common+0x103/0x189
> [<ffffffff8024f29b>] ? default_wake_function+0x0/0x36
> [<ffffffff80a57a62>] wait_for_completion+0x2b/0x41
> [<ffffffff8026c0d2>] call_usermodehelper_exec+0x87/0xe5
> [<ffffffff80561073>] kobject_uevent_env+0x3d0/0x424
> [<ffffffff805610e5>] kobject_uevent+0x1e/0x34
> [<ffffffff805f2dbd>] device_add+0x2f9/0x494
> [<ffffffff805f2f80>] device_register+0x28/0x43
> [<ffffffff80577abf>] pcie_port_device_register+0x3f1/0x43e
> [<ffffffff80972165>] ? pcibios_set_master+0x8d/0xa8
> [<ffffffff80a24a1c>] pcie_portdrv_probe+0x79/0xbb
> [<ffffffff80574173>] pci_call_probe+0xe5/0x146
> [<ffffffff80574331>] pci_device_probe+0x64/0xa2
> [<ffffffff805f5946>] driver_probe_device+0xcf/0x16d
> [<ffffffff8031d708>] ? sysfs_addrm_finish+0x2f/0x22b
> [<ffffffff805f5b0b>] ? __driver_attach+0x0/0xbe
> [<ffffffff805f5b79>] __driver_attach+0x6e/0xbe
> [<ffffffff805f4999>] bus_for_each_dev+0x5e/0xa2
> [<ffffffff805f571f>] driver_attach+0x2f/0x45
> [<ffffffff805f5430>] bus_add_driver+0xc6/0x226
> [<ffffffff805f45a4>] ? bus_put+0x29/0x3f
> [<ffffffff805f5e66>] driver_register+0x6d/0xfc
> [<ffffffff805745fa>] __pci_register_driver+0x62/0xb0
> [<ffffffff818b25db>] pcie_portdrv_init+0x4a/0x72
> [<ffffffff81890bcf>] kernel_init+0x1b4/0x340
> [<ffffffff80225308>] child_rip+0xa/0x12
> [<ffffffff81890a1b>] ? kernel_init+0x0/0x340
> [<ffffffff802252fe>] ? child_rip+0x0/0x12
>
>
> Code: 24 40 78 1c 8b 3d 36 05 b3 00 48 89 da be 00 04 00 00 e8 7a eb
> ff ff 49 39 c6 7f 04 4c 8b 63 48 4c 89 e6 4
> 8 89 df e8 29 f1 ff ff <49> 8b 9c 24 48 01 00 00 48 85 db 75 a5 49 8d
> 5c 24 c8 4c 89 ef
> RIP [<ffffffff8024b3cf>] pick_next_task_fair+0x7c/0xbb
> RSP <ffff81081cc5cd70>
> CR2: 0000000000000148
> ---[ end trace e26645195698f5cf ]---
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 0/2] NR_CPUS: increase maximum NR_CPUS to 4096
2008-04-05 1:30 Mike Travis
@ 2008-04-08 21:53 ` Yinghai Lu
2008-04-08 22:03 ` Mike Travis
0 siblings, 1 reply; 26+ messages in thread
From: Yinghai Lu @ 2008-04-08 21:53 UTC (permalink / raw)
To: Mike Travis
Cc: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
linux-kernel
On Fri, Apr 4, 2008 at 6:30 PM, Mike Travis <travis@sgi.com> wrote:
>
> * Increases the limit of NR_CPUS to 4096 and introduces a
> boolean called "MAXSMP" which when set (e.g. "allyesconfig")
> will set NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
>
> I've been running this config (4k NR_CPUS, 512 Max Nodes)
> on an AMD box with 2 dual-cores and 4gb memory as well as an
> Intel box with 4 single-core cpus and 8Mb. I've also
> successfully booted it in a simulated 2cpus/1Gb environment.
>
> Based on:
> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
> + x86/latest .../x86/linux-2.6-x86.git
> + sched-devel/latest .../mingo/linux-2.6-sched-devel.git
>
> Signed-off-by: Mike Travis <travis@sgi.com>
got
------------[ cut here ]------------
WARNING: at kernel/sched_fair.c:815 hrtick_start_fair+0x69/0x156()
Modules linked in:
Pid: 1, comm: swapper Not tainted
2.6.25-rc8-x86-latest.git-smp-01033-ga39ae31-dirty #77
Call Trace:
[<ffffffff802596ce>] warn_on_slowpath+0x67/0x8e
[<ffffffff8024b266>] hrtick_start_fair+0x69/0x156
[<ffffffff8024a619>] ? dequeue_entity+0x2a/0xf8
[<ffffffff8025547d>] dequeue_task_fair+0x5f/0x7e
[<ffffffff80248ea3>] dequeue_task+0x22/0x44
[<ffffffff80248efe>] deactivate_task+0x39/0x69
[<ffffffff80a57c31>] schedule+0x1b9/0x5c5
[<ffffffff80270dff>] ? autoremove_wake_function+0x20/0x5e
[<ffffffff80a58338>] schedule_timeout+0x31/0xd7
[<ffffffff8024db1a>] ? __wake_up+0x52/0x75
[<ffffffff80a578a3>] wait_for_common+0x103/0x189
[<ffffffff8024f29b>] ? default_wake_function+0x0/0x36
[<ffffffff80a57a62>] wait_for_completion+0x2b/0x41
[<ffffffff8026c0d2>] call_usermodehelper_exec+0x87/0xe5
[<ffffffff80561073>] kobject_uevent_env+0x3d0/0x424
[<ffffffff805610e5>] kobject_uevent+0x1e/0x34
[<ffffffff805f2dbd>] device_add+0x2f9/0x494
[<ffffffff805f2f80>] device_register+0x28/0x43
[<ffffffff80577abf>] pcie_port_device_register+0x3f1/0x43e
[<ffffffff80972165>] ? pcibios_set_master+0x8d/0xa8
[<ffffffff80a24a1c>] pcie_portdrv_probe+0x79/0xbb
[<ffffffff80574173>] pci_call_probe+0xe5/0x146
[<ffffffff80574331>] pci_device_probe+0x64/0xa2
[<ffffffff805f5946>] driver_probe_device+0xcf/0x16d
[<ffffffff8031d708>] ? sysfs_addrm_finish+0x2f/0x22b
[<ffffffff805f5b0b>] ? __driver_attach+0x0/0xbe
[<ffffffff805f5b79>] __driver_attach+0x6e/0xbe
[<ffffffff805f4999>] bus_for_each_dev+0x5e/0xa2
[<ffffffff805f571f>] driver_attach+0x2f/0x45
[<ffffffff805f5430>] bus_add_driver+0xc6/0x226
[<ffffffff805f45a4>] ? bus_put+0x29/0x3f
[<ffffffff805f5e66>] driver_register+0x6d/0xfc
[<ffffffff805745fa>] __pci_register_driver+0x62/0xb0
[<ffffffff818b25db>] pcie_portdrv_init+0x4a/0x72
[<ffffffff81890bcf>] kernel_init+0x1b4/0x340
[<ffffffff80225308>] child_rip+0xa/0x12
[<ffffffff81890a1b>] ? kernel_init+0x0/0x340
[<ffffffff802252fe>] ? child_rip+0x0/0x12
---[ end trace e26645195698f5cf ]---
BUG: unable to handle kernel NULL pointer dereference at 0000000000000148
IP: [<ffffffff8024b3cf>] pick_next_task_fair+0x7c/0xbb
PGD 0
Oops: 0000 [1] SMP
CPU 28
Modules linked in:
Pid: 1, comm: swapper Not tainted
2.6.25-rc8-x86-latest.git-smp-01033-ga39ae31-dirty #77
RIP: 0010:[<ffffffff8024b3cf>] [<ffffffff8024b3cf>]
pick_next_task_fair+0x7c/0xbb
RSP: 0018:ffff81081cc5cd70 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff81383c21a280 RCX: 0000000000000000
RDX: ffff81383c224080 RSI: ffff81383c224080 RDI: 0000000063e15417
RBP: ffff81081cc5cda0 R08: 0000000000000000 R09: ffff81383c224108
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: ffff81383c224080 R14: ffff81383c224080 R15: 000000000000001c
FS: 0000000000000000(0000) GS:ffff81401cc3c600(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000148 CR3: 0000000000201000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff81081cc5c000, task ffff81401cc52000)
Stack: ffff81081cc5cda0 0000000063e15417 ffffffff80a81840 0000000000000000
00000000fffeecfd ffff81383c224080 ffff81081cc5ce70 ffffffff80a57d28
ffff81081cc5ce00 ffff81081cc5ce20 ffffffff81963080 ffffffff81963080
Call Trace:
[<ffffffff80a57d28>] schedule+0x2b0/0x5c5
[<ffffffff80270dff>] ? autoremove_wake_function+0x20/0x5e
[<ffffffff80a58338>] schedule_timeout+0x31/0xd7
[<ffffffff8024db1a>] ? __wake_up+0x52/0x75
[<ffffffff80a578a3>] wait_for_common+0x103/0x189
[<ffffffff8024f29b>] ? default_wake_function+0x0/0x36
[<ffffffff80a57a62>] wait_for_completion+0x2b/0x41
[<ffffffff8026c0d2>] call_usermodehelper_exec+0x87/0xe5
[<ffffffff80561073>] kobject_uevent_env+0x3d0/0x424
[<ffffffff805610e5>] kobject_uevent+0x1e/0x34
[<ffffffff805f2dbd>] device_add+0x2f9/0x494
[<ffffffff805f2f80>] device_register+0x28/0x43
[<ffffffff80577abf>] pcie_port_device_register+0x3f1/0x43e
[<ffffffff80972165>] ? pcibios_set_master+0x8d/0xa8
[<ffffffff80a24a1c>] pcie_portdrv_probe+0x79/0xbb
[<ffffffff80574173>] pci_call_probe+0xe5/0x146
[<ffffffff80574331>] pci_device_probe+0x64/0xa2
[<ffffffff805f5946>] driver_probe_device+0xcf/0x16d
[<ffffffff8031d708>] ? sysfs_addrm_finish+0x2f/0x22b
[<ffffffff805f5b0b>] ? __driver_attach+0x0/0xbe
[<ffffffff805f5b79>] __driver_attach+0x6e/0xbe
[<ffffffff805f4999>] bus_for_each_dev+0x5e/0xa2
[<ffffffff805f571f>] driver_attach+0x2f/0x45
[<ffffffff805f5430>] bus_add_driver+0xc6/0x226
[<ffffffff805f45a4>] ? bus_put+0x29/0x3f
[<ffffffff805f5e66>] driver_register+0x6d/0xfc
[<ffffffff805745fa>] __pci_register_driver+0x62/0xb0
[<ffffffff818b25db>] pcie_portdrv_init+0x4a/0x72
[<ffffffff81890bcf>] kernel_init+0x1b4/0x340
[<ffffffff80225308>] child_rip+0xa/0x12
[<ffffffff81890a1b>] ? kernel_init+0x0/0x340
[<ffffffff802252fe>] ? child_rip+0x0/0x12
Code: 24 40 78 1c 8b 3d 36 05 b3 00 48 89 da be 00 04 00 00 e8 7a eb
ff ff 49 39 c6 7f 04 4c 8b 63 48 4c 89 e6 4
8 89 df e8 29 f1 ff ff <49> 8b 9c 24 48 01 00 00 48 85 db 75 a5 49 8d
5c 24 c8 4c 89 ef
RIP [<ffffffff8024b3cf>] pick_next_task_fair+0x7c/0xbb
RSP <ffff81081cc5cd70>
CR2: 0000000000000148
---[ end trace e26645195698f5cf ]---
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 0/2] NR_CPUS: increase maximum NR_CPUS to 4096
@ 2008-04-05 1:30 Mike Travis
2008-04-08 21:53 ` Yinghai Lu
0 siblings, 1 reply; 26+ messages in thread
From: Mike Travis @ 2008-04-05 1:30 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Thomas Gleixner, H. Peter Anvin, Andrew Morton, linux-kernel
* Increases the limit of NR_CPUS to 4096 and introduces a
boolean called "MAXSMP" which when set (e.g. "allyesconfig")
will set NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
I've been running this config (4k NR_CPUS, 512 Max Nodes)
on an AMD box with 2 dual-cores and 4gb memory as well as an
Intel box with 4 single-core cpus and 8Mb. I've also
successfully booted it in a simulated 2cpus/1Gb environment.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ x86/latest .../x86/linux-2.6-x86.git
+ sched-devel/latest .../mingo/linux-2.6-sched-devel.git
Signed-off-by: Mike Travis <travis@sgi.com>
---
Memory usage effects from upping NR_CPUS to 4096 and MAX_NUMANODES to 512.
255-akpm2: akpm2 config with NR_CPUS=255 / NUMA_NODE_SHIFT=6
4k-akpm2: akpm2 config with NR_CPUS=4096 / NUMA_NODE_SHIFT=9
====== Data (-l 1000)
1 - 255-akpm2
2 - 4k-akpm2
.1. .2. ..final..
1114112 +3899392 5013504 +350% irq_desc(.data.cacheline_aligned)
313344 +4177920 4491264 +1333% irq_cfg(.data.read_mostly)
76800 +537600 614400 +700% early_node_map(.init.data)
32640 +491648 524288 +1506% boot_pageset(.bss)
32640 +491648 524288 +1506% boot_cpu_pda(.data.cacheline_aligned)
23040 +161280 184320 +700% initkmem_list3(.init.data)
5632 +39424 45056 +700% node_devices(.bss)
4096 +28672 32768 +700% plat_node_bdata(.bss)
2656 +34312 36968 +1291% cache_cache(.data)
2048 +14336 16384 +700% rio_devs(.init.data)
2048 +260096 262144 +12700% node_to_cpumask_map(.data.read_mostly)
2040 +30728 32768 +1506% centrino_model(.bss)
2040 +30728 32768 +1506% centrino_cpu(.bss)
2040 +30728 32768 +1506% _cpu_pda(.data.read_mostly)
1024 +1024 2048 +100% pxm_to_node_map(.data)
1024 +7168 8192 +700% nodes_add(.bss)
1024 +7168 8192 +700% nodes(.init.data)
1024 +7168 8192 +700% hugepage_freelists(.bss)
1020 +15364 16384 +1506% x86_cpu_to_node_map_init(.data)
1020 +15364 16384 +1506% cpu_set_freq(.bss)
1020 +15364 16384 +1506% cpu_min_freq(.bss)
1020 +15364 16384 +1506% cpu_max_freq(.bss)
1020 +15364 16384 +1506% cpu_is_managed(.bss)
1020 +15364 16384 +1506% cpu_cur_freq(.bss)
512 +3584 4096 +700% zone_movable_pfn(.init.data)
512 +3584 4096 +700% scal_devs(.init.data)
512 +3584 4096 +700% node_data(.data.read_mostly)
510 +7682 8192 +1506% x86_cpu_to_apicid_init(.init.data)
510 +7682 8192 +1506% x86_bios_cpu_apicid_init(.init.data)
0 +4096 4096 . tvec_base_done(.data)
0 +2048 2048 . surplus_huge_pages_node(.bss)
0 +2048 2048 . nr_huge_pages_node(.bss)
0 +2048 2048 . node_to_pxm_map(.data)
0 +2048 2048 . node_order(.bss)
0 +2048 2048 . node_load(.bss)
0 +2048 2048 . free_huge_pages_node(.bss)
0 +2048 2048 . fake_node_to_pxm_map(.init.data)
0 +1552 1552 . def_root_domain(.bss)
====== Sections (-l 500)
1 - 255-akpm2
2 - 4k-akpm2
.1. .2. ..final..
63092788 +10579589 73672377 +16% Total
41514099 +93823 41607922 <1% .debug_info
6648945 -2268 6646677 <1% .debug_loc
3365341 +7483 3372824 <1% .text
2631073 -1672 2629401 <1% .debug_line
1320219 +31557 1351776 +2% .debug_abbrev
1149568 +4391040 5540608 +381% .data.cacheline_aligned
1106192 -4784 1101408 <1% .debug_ranges
732736 +728832 1461568 +99% .bss
329672 +4474992 4804664 +1357% .data.read_mostly
285576 +100320 385896 +35% .data
173664 +751936 925600 +432% .init.data
40824 +7808 48632 +19% .data.percpu
====== Text/Data ()
1 - 255-akpm2
2 - 4k-akpm2
.1. .2. ..final..
3364864 +8192 3373056 <1% TextSize
1552384 +100352 1652736 +6% DataSize
733184 +729088 1462272 +99% BssSize
393216 +757760 1150976 +192% InitSize
40960 +8192 49152 +20% PerCPU
1529856 +8869888 10399744 +579% OtherSize
7614464 +10473472 18087936 +137% Totals
====== PerCPU ()
1 - 255-akpm2
2 - 4k-akpm2
.1. .2. ..final..
18432 -2048 16384 -11% kstat
10240 -2048 8192 -20% init_tss
2048 -2048 . -100% fdtable_defer_list
0 +2048 2048 . node_domains
0 +2048 2048 . lru_add_active_pvecs
0 +2048 2048 . cpuidle_devices
0 +2048 2048 . cpu_mask
0 +2048 2048 . cpu_info
0 +2048 2048 . cpu_core_map
0 +2048 2048 . core_domains
30720 +8192 38912 +26% Totals
====== Stack (-l 1000)
1 - 255-akpm2
2 - 4k-akpm2
.1. .2. ..final..
0 +4216 4216 . show_schedstat
0 +2744 2744 . build_sched_domains
0 +2152 2152 . centrino_target
0 +1640 1640 . setup_IO_APIC
0 +1592 1592 . move_task_off_dead_cpu
0 +1576 1576 . setup_IO_APIC_irq
0 +1560 1560 . tick_notify
0 +1560 1560 . __assign_irq_vector
0 +1552 1552 . arch_setup_msi_irq
0 +1552 1552 . arch_setup_ht_irq
0 +1544 1544 . tick_do_periodic_broadcast
0 +1544 1544 . irq_affinity_write_proc
0 +1144 1144 . threshold_create_device
0 +1112 1112 . sched_balance_self
0 +1064 1064 . _cpu_down
0 +1056 1056 . __smp_call_function_mask
0 +1048 1048 . store_threshold_limit
0 +1048 1048 . set_ioapic_affinity_irq
0 +1048 1048 . acpi_processor_set_throttling
0 +1048 1048 . acpi_map_lsapic
0 +1040 1040 . store_interrupt_enable
0 +1040 1040 . set_msi_irq_affinity
0 +1040 1040 . set_ht_irq_affinity
0 +1032 1032 . store_error_count
0 +1032 1032 . show_error_count
0 +1032 1032 . setup_ioapic_dest
0 +1032 1032 . sched_setaffinity
0 +1032 1032 . physflat_send_IPI_allbutself
0 +1032 1032 . native_flush_tlb_others
0 +1032 1032 . move_masked_irq
0 +1032 1032 . flat_send_IPI_allbutself
0 +1024 1024 . pci_bus_show_cpuaffinity
0 +1024 1024 . machine_crash_shutdown
0 +1024 1024 . local_cpus_show
0 +1024 1024 . irq_complete_move
0 +1024 1024 . ioapic_retrigger_irq
0 +1024 1024 . fixup_irqs
0 +1024 1024 . create_irq
====== MemInfo ()
1 - 255-akpm2
2 - 4k-akpm2
.1. .2. ..final..
30146560 +786432 30932992 +2% Active
1018880 +64512 1083392 +6% Active(Node.0)
6517760 +132096 6649856 +2% Active(Node.1)
17465344 -12288 17453056 <1% AnonPages
2932736 +69632 3002368 +2% AnonPages(Node.0)
14532608 -81920 14450688 <1% AnonPages(Node.1)
5804032 +327680 6131712 +5% Buffers
57851904 +17252352 75104256 +29% Cached
10078793728 -5058560 10073735168 <1% CommitLimit
73453568 +1028096 74481664 +1% Committed_AS
184320 -184320 . -100% Dirty
20480 -20480 . -100% Dirty(Node.0)
163840 -163840 . -100% Dirty(Node.1)
3391488 +352256 3743744 +10% FilePages(Node.0)
60264448 +17227776 77492224 +28% FilePages(Node.1)
50900992 +16818176 67719168 +33% Inactive
561152 +41984 603136 +7% Inactive(Node.0)
12164096 +4162560 16326656 +34% Inactive(Node.1)
8847360 +16384 8863744 <1% Mapped
290816 +45056 335872 +15% Mapped(Node.0)
8556544 -28672 8527872 <1% Mapped(Node.1)
4014837760 -54091776 3960745984 -1% MemFree
2012188672 -16060416 1996128256 <1% MemFree(Node.0)
2002522112 -38031360 1964490752 -1% MemFree(Node.1)
4151279616 -10117120 4141162496 <1% MemTotal
134877184 +16060416 150937600 +11% MemUsed(Node.0)
143912960 +38031360 181944320 +26% MemUsed(Node.1)
2306048 -8192 2297856 <1% PageTables
872448 +32768 905216 +3% PageTables(Node.0)
1433600 -40960 1392640 -2% PageTables(Node.1)
8290304 +217088 8507392 +2% SReclaimable
1155072 -184320 970752 -15% SReclaimable(Node.0)
7135232 +401408 7536640 +5% SReclaimable(Node.1)
12480512 +11087872 23568384 +88% SUnreclaim
4730880 +6569984 11300864 +138% SUnreclaim(Node.0)
7749632 +4517888 12267520 +58% SUnreclaim(Node.1)
20770816 +11304960 32075776 +54% Slab
5885952 +6385664 12271616 +108% Slab(Node.0)
14884864 +4919296 19804160 +33% Slab(Node.1)
159670272 -4096 159666176 <1% VmallocUsed
23140846592 +33765376 23174611968 +0% Totals
Memory usage in a simulated 2cpu/1gb environment using the
default configuration and NR_CPUS=4096, MAX Nodes=512:
Memory: 1013440k/1048576k available
(3588k kernel code, 33728k reserved, 1962k data, 1212k init)
MemTotal: 1014652 kB
MemFree: 991364 kB
Buffers: 192 kB
Cached: 3436 kB
SwapCached: 0 kB
Active: 1636 kB
Inactive: 2648 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 20 kB
Writeback: 0 kB
AnonPages: 656 kB
Mapped: 1412 kB
Slab: 12752 kB
SReclaimable: 236 kB
SUnreclaim: 12516 kB
PageTables: 36 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
CommitLimit: 507324 kB
Committed_AS: 0 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 4896 kB
VmallocChunk: 34359733471 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
--
^ permalink raw reply [flat|nested] 26+ messages in thread
end of thread, other threads:[~2008-04-08 22:33 UTC | newest]
Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-03-26 1:41 [PATCH 0/2] NR_CPUS: increase maximum NR_CPUS to 4096 Mike Travis
2008-03-26 1:41 ` Mike Travis
2008-03-26 1:41 ` [PATCH 1/2] boot: increase stack size for kernel boot loader decompressor Mike Travis
2008-03-26 1:41 ` Mike Travis
2008-03-26 1:41 ` [PATCH 2/2] x86: Modify Kconfig to allow up to 4096 cpus Mike Travis
2008-03-26 1:41 ` Mike Travis
2008-03-26 16:09 ` Adrian Bunk
2008-03-26 16:09 ` Adrian Bunk
2008-03-26 16:31 ` Mike Travis
2008-03-26 16:31 ` Mike Travis
2008-03-26 16:55 ` Adrian Bunk
2008-03-26 16:55 ` Adrian Bunk
2008-03-27 15:06 ` Mike Travis
2008-03-27 15:06 ` Mike Travis
2008-03-26 19:16 ` Christoph Lameter
2008-03-26 19:16 ` Christoph Lameter
2008-03-26 19:28 ` Yinghai Lu
2008-03-26 19:28 ` Yinghai Lu
2008-03-26 6:19 ` [PATCH 0/2] NR_CPUS: increase maximum NR_CPUS to 4096 Ingo Molnar
2008-03-26 6:19 ` Ingo Molnar
2008-03-26 15:59 ` Mike Travis
2008-03-26 15:59 ` Mike Travis
2008-04-05 1:30 Mike Travis
2008-04-08 21:53 ` Yinghai Lu
2008-04-08 22:03 ` Mike Travis
2008-04-08 22:32 ` Yinghai Lu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.