* Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
@ 2008-05-14 7:58 Erik Inge Bolsø
2008-05-14 8:05 ` [RESOLVED] " Tvrtko A. Ursulin
0 siblings, 1 reply; 7+ messages in thread
From: Erik Inge Bolsø @ 2008-05-14 7:58 UTC (permalink / raw)
To: tvrtko, htejun, linux-ide
The drive does say
Enabled Supported:
SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
... so doesn't look like SMART is enabled on the drive.
Does the problem go away if you do a
smartctl -s on /dev/sda
first? :)
--
-erik http://useofwords.blogspot.com/
^ permalink raw reply [flat|nested] 7+ messages in thread
* [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
2008-05-14 7:58 libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI Erik Inge Bolsø
@ 2008-05-14 8:05 ` Tvrtko A. Ursulin
2008-05-14 8:31 ` Tejun Heo
0 siblings, 1 reply; 7+ messages in thread
From: Tvrtko A. Ursulin @ 2008-05-14 8:05 UTC (permalink / raw)
To: Erik Inge Bolsø; +Cc: htejun, linux-ide
On Wednesday 14 May 2008 08:58:56 Erik Inge Bolsø wrote:
> The drive does say
>
> Enabled Supported:
> SMART feature set
> Security Mode feature set
> * Power Management feature set
> * Write cache
> * Look-ahead
>
> ... so doesn't look like SMART is enabled on the drive.
>
> Does the problem go away if you do a
>
> smartctl -s on /dev/sda
>
> first? :)
Indeed it does, shame on me for overseeing that small detail. :)
Thanks,
Tvrtko
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
2008-05-14 8:05 ` [RESOLVED] " Tvrtko A. Ursulin
@ 2008-05-14 8:31 ` Tejun Heo
2008-05-14 19:36 ` Jim Paris
0 siblings, 1 reply; 7+ messages in thread
From: Tejun Heo @ 2008-05-14 8:31 UTC (permalink / raw)
To: Tvrtko A. Ursulin; +Cc: Erik Inge Bolsø, linux-ide
Tvrtko A. Ursulin wrote:
> On Wednesday 14 May 2008 08:58:56 Erik Inge Bolsø wrote:
>> The drive does say
>>
>> Enabled Supported:
>> SMART feature set
>> Security Mode feature set
>> * Power Management feature set
>> * Write cache
>> * Look-ahead
>>
>> ... so doesn't look like SMART is enabled on the drive.
>>
>> Does the problem go away if you do a
>>
>> smartctl -s on /dev/sda
>>
>> first? :)
>
> Indeed it does, shame on me for overseeing that small detail. :)
Oh... shame on me too. :-)
--
tejun
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
2008-05-14 8:31 ` Tejun Heo
@ 2008-05-14 19:36 ` Jim Paris
2008-05-15 3:44 ` Tejun Heo
0 siblings, 1 reply; 7+ messages in thread
From: Jim Paris @ 2008-05-14 19:36 UTC (permalink / raw)
To: Tejun Heo; +Cc: Tvrtko A. Ursulin, Erik Inge Bolsø, linux-ide
Tejun Heo wrote:
> Tvrtko A. Ursulin wrote:
>> On Wednesday 14 May 2008 08:58:56 Erik Inge Bolsø wrote:
>>> The drive does say
>>>
>>> Enabled Supported:
>>> SMART feature set
>>> Security Mode feature set
>>> * Power Management feature set
>>> * Write cache
>>> * Look-ahead
>>>
>>> ... so doesn't look like SMART is enabled on the drive.
>>>
>>> Does the problem go away if you do a
>>>
>>> smartctl -s on /dev/sda
>>>
>>> first? :)
>> Indeed it does, shame on me for overseeing that small detail. :)
>
> Oh... shame on me too. :-)
Why didn't smartctl notice that? In my experience it usually does
report when SMART is disabled. Is the error not being properly
reported back to userspace maybe? Tvrtko's original problem report
has lots of uninitialized (or leaked?) data, and a lot of it looks
like ASCII (for example his bogus RAW_VALUEs contain pieces of the
model number).
-jim
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
2008-05-14 19:36 ` Jim Paris
@ 2008-05-15 3:44 ` Tejun Heo
2008-05-15 5:28 ` Bruce Allen
0 siblings, 1 reply; 7+ messages in thread
From: Tejun Heo @ 2008-05-15 3:44 UTC (permalink / raw)
To: Jim Paris; +Cc: Tvrtko A. Ursulin, Erik Inge Bolsø, linux-ide, Bruce Allen
Jim Paris wrote:
> Tejun Heo wrote:
>> Tvrtko A. Ursulin wrote:
>>> On Wednesday 14 May 2008 08:58:56 Erik Inge Bolsø wrote:
>>>> The drive does say
>>>>
>>>> Enabled Supported:
>>>> SMART feature set
>>>> Security Mode feature set
>>>> * Power Management feature set
>>>> * Write cache
>>>> * Look-ahead
>>>>
>>>> ... so doesn't look like SMART is enabled on the drive.
>>>>
>>>> Does the problem go away if you do a
>>>>
>>>> smartctl -s on /dev/sda
>>>>
>>>> first? :)
>>> Indeed it does, shame on me for overseeing that small detail. :)
>> Oh... shame on me too. :-)
>
> Why didn't smartctl notice that? In my experience it usually does
> report when SMART is disabled. Is the error not being properly
> reported back to userspace maybe? Tvrtko's original problem report
> has lots of uninitialized (or leaked?) data, and a lot of it looks
> like ASCII (for example his bogus RAW_VALUEs contain pieces of the
> model number).
Let's ask Bruce. Bruce, SMART was disabled on WD3200AAKS but smartctl
-a didn't detect it and issued SMART commands anyway triggering
timeouts. Is this expected behavior? Or is libata feeding wrong status
to smartctl?
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
2008-05-15 3:44 ` Tejun Heo
@ 2008-05-15 5:28 ` Bruce Allen
2008-05-15 7:21 ` Tvrtko A. Ursulin
0 siblings, 1 reply; 7+ messages in thread
From: Bruce Allen @ 2008-05-15 5:28 UTC (permalink / raw)
To: Jim Paris, Tvrtko A. Ursulin, Erik Inge Bolsø, Tejun Heo; +Cc: linux-ide
[-- Attachment #1: Type: TEXT/PLAIN, Size: 1520 bytes --]
Gentlemen,
Please reproduce the problem, adding the command-line switch '-r ioctl,3'
which shows return status of various commands, then send session
transcript.
Cheers,
Bruce
On Thu, 15 May 2008, Tejun Heo wrote:
> Jim Paris wrote:
>> Tejun Heo wrote:
>>> Tvrtko A. Ursulin wrote:
>>>> On Wednesday 14 May 2008 08:58:56 Erik Inge Bolsø wrote:
>>>>> The drive does say
>>>>>
>>>>> Enabled Supported:
>>>>> SMART feature set
>>>>> Security Mode feature set
>>>>> * Power Management feature set
>>>>> * Write cache
>>>>> * Look-ahead
>>>>>
>>>>> ... so doesn't look like SMART is enabled on the drive.
>>>>>
>>>>> Does the problem go away if you do a
>>>>>
>>>>> smartctl -s on /dev/sda
>>>>>
>>>>> first? :)
>>>> Indeed it does, shame on me for overseeing that small detail. :)
>>> Oh... shame on me too. :-)
>>
>> Why didn't smartctl notice that? In my experience it usually does
>> report when SMART is disabled. Is the error not being properly
>> reported back to userspace maybe? Tvrtko's original problem report
>> has lots of uninitialized (or leaked?) data, and a lot of it looks
>> like ASCII (for example his bogus RAW_VALUEs contain pieces of the
>> model number).
>
> Let's ask Bruce. Bruce, SMART was disabled on WD3200AAKS but smartctl -a
> didn't detect it and issued SMART commands anyway triggering timeouts. Is
> this expected behavior? Or is libata feeding wrong status to smartctl?
>
> Thanks.
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
2008-05-15 5:28 ` Bruce Allen
@ 2008-05-15 7:21 ` Tvrtko A. Ursulin
0 siblings, 0 replies; 7+ messages in thread
From: Tvrtko A. Ursulin @ 2008-05-15 7:21 UTC (permalink / raw)
To: Bruce Allen; +Cc: Jim Paris, Erik Inge Bolsø, Tejun Heo, linux-ide
On Thursday 15 May 2008 06:28:34 Bruce Allen wrote:
> Gentlemen,
>
> Please reproduce the problem, adding the command-line switch '-r ioctl,3'
> which shows return status of various commands, then send session
> transcript.
Unfortunately since reporting this I switched away from vanilla 2.6.24 to
Ubuntu's 8.04 version of it so I can't exactly reproduce it right now.
However running smartctl -a still causes a SATA timeout, although the
output looks saner (to me at least).
Attached is what I can provide at the moment, for vanilla 2.6.24 I can't
do it before the weekend.
SMART is enabled in the BIOS btw.
---<smartctl 1>------------------------------------------------------------------------------------
root@sol:~# smartctl -a -r ioctl,3 /dev/sda
smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
[inquiry: 12 00 00 00 24 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=0 milliseconds
Incoming data, len=36:
00 00 00 05 02 5b 00 00 00 41 54 41 20 20 20 20 20
10 57 44 43 20 57 44 33 32 30 30 41 41 4b 53 2d 30
20 31 32 2e 30
status=0x0
[ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=0 milliseconds
Incoming data, len=512 [only first 256 bytes shown]:
00 7a 42 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00
10 00 00 00 00 20 20 20 20 57 20 2d 44 43 57 52 41
20 30 57 35 30 38 39 33 39 00 00 00 80 32 00 32 31
30 30 2e 42 31 32 30 44 57 20 43 44 57 32 33 30 30
40 41 41 53 4b 30 2d 56 30 41 59 20 30 20 20 20 20
50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80
60 00 00 00 2f 01 40 00 00 00 00 07 00 ff 3f 10 00
70 3f 00 10 fc fb 00 00 01 ff ff ff 0f 00 00 07 00
80 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00
90 00 00 00 00 00 00 1f 00 06 07 00 00 44 00 40 00
a0 fe 01 00 00 6b 74 61 7f 23 41 68 74 41 bc 23 41
b0 7f 40 2c 00 2c 00 00 00 fe ff 00 00 fe 80 00 00
c0 00 00 00 00 00 00 00 00 b0 ea 42 25 00 00 00 00
d0 00 00 00 00 00 00 00 00 01 50 e1 4e 48 00 55 56
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 40
f0 10 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
Detected SAT interface, switch to device type 'sat'
REPORT-IOCTL: DeviceFD=3 Command=IDENTIFY DEVICE
[ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=0 milliseconds
Incoming data, len=512 [only first 256 bytes shown]:
00 7a 42 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00
10 00 00 00 00 20 20 20 20 57 20 2d 44 43 57 52 41
20 30 57 35 30 38 39 33 39 00 00 00 80 32 00 32 31
30 30 2e 42 31 32 30 44 57 20 43 44 57 32 33 30 30
40 41 41 53 4b 30 2d 56 30 41 59 20 30 20 20 20 20
50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80
60 00 00 00 2f 01 40 00 00 00 00 07 00 ff 3f 10 00
70 3f 00 10 fc fb 00 00 01 ff ff ff 0f 00 00 07 00
80 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00
90 00 00 00 00 00 00 1f 00 06 07 00 00 44 00 40 00
a0 fe 01 00 00 6b 74 61 7f 23 41 68 74 41 bc 23 41
b0 7f 40 2c 00 2c 00 00 00 fe ff 00 00 fe 80 00 00
c0 00 00 00 00 00 00 00 00 b0 ea 42 25 00 00 00 00
d0 00 00 00 00 00 00 00 00 01 50 e1 4e 48 00 55 56
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 40
f0 10 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
REPORT-IOCTL: DeviceFD=3 Command=IDENTIFY DEVICE returned 0
===== [IDENTIFY DEVICE] DATA START (BASE-16) =====
000-015: 7a 42 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00
016-031: 00 00 00 00 20 20 20 20 57 20 2d 44 43 57 52 41
032-047: 30 57 35 30 38 39 33 39 00 00 00 80 32 00 32 31
048-063: 30 2e 42 31 32 30 44 57 20 43 44 57 32 33 30 30
064-079: 41 41 53 4b 30 2d 56 30 41 59 20 30 20 20 20 20
080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80
096-111: 00 00 00 2f 01 40 00 00 00 00 07 00 ff 3f 10 00
112-127: 3f 00 10 fc fb 00 00 01 ff ff ff 0f 00 00 07 00
128-143: 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 1f 00 06 07 00 00 44 00 40 00
160-175: fe 01 00 00 6b 74 61 7f 23 41 68 74 41 bc 23 41
176-191: 7f 40 2c 00 2c 00 00 00 fe ff 00 00 fe 80 00 00
192-207: 00 00 00 00 00 00 00 00 b0 ea 42 25 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 01 50 e1 4e 48 00 55 56
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 40
240-255: 10 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 21 00 00 00 00 00 00 00 00 00 90 16 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 3f 30 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 01 00 00 10 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 50
===== [IDENTIFY DEVICE] DATA END (512 Bytes) =====
=== START OF INFORMATION SECTION ===
Device Model: WDC WD3200AAKS-00VYA0
Serial Number: WD-WCARW0059893
Firmware Version: 12.01B02
User Capacity: 320,072,933,376 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu May 15 08:16:48 2008 BST
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS
[ata pass-through(16): 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=0 milliseconds
>>> Sense buffer, len=22:
00 72 0b 00 00 00 00 00 0e 09 0c 00 04 00 01 00 b4
10 00 4f 00 c2 00 51
status=2: [desc] sense_key=b asc=0 ascq=0
Values from ATA status return descriptor are:
00 09 0c 00 04 00 01 00 b4 00 4f 00 c2 00 51
REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS returned 0
REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS CHECK
[ata pass-through(16): 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=6648 milliseconds
>>> Sense buffer, len=22:
00 72 0b 00 00 00 00 00 0e 09 0c 00 00 00 01 00 b4
10 00 4f 00 c2 00 40
status=2: [desc] sense_key=b asc=0 ascq=0
Values from ATA status return descriptor are:
00 09 0c 00 00 00 01 00 b4 00 4f 00 c2 00 40
REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS CHECK returned 0
REPORT-IOCTL: DeviceFD=3 Command=SMART READ ATTRIBUTE VALUES
[ata pass-through(16): 85 08 0e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=248 milliseconds
Incoming data, len=512 [only first 256 bytes shown]:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> Sense buffer, len=22:
00 72 0b 00 00 00 00 00 0e 09 0c 00 04 00 01 00 b4
10 00 4f 00 c2 00 51
status=2: [desc] sense_key=b asc=0 ascq=0
REPORT-IOCTL: DeviceFD=3 Command=SMART READ ATTRIBUTE VALUES returned 0
===== [SMART READ ATTRIBUTE VALUES] DATA START (BASE-16) =====
000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
===== [SMART READ ATTRIBUTE VALUES] DATA END (512 Bytes) =====
REPORT-IOCTL: DeviceFD=3 Command=SMART READ ATTRIBUTE THRESHOLDS
[ata pass-through(16): 85 08 0e 00 d1 00 01 00 01 00 4f 00 c2 00 b0 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=0 milliseconds
Incoming data, len=512 [only first 256 bytes shown]:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> Sense buffer, len=22:
00 72 0b 00 00 00 00 00 0e 09 0c 00 04 00 01 00 b4
10 00 4f 00 c2 00 51
status=2: [desc] sense_key=b asc=0 ascq=0
REPORT-IOCTL: DeviceFD=3 Command=SMART READ ATTRIBUTE THRESHOLDS returned 0
===== [SMART READ ATTRIBUTE THRESHOLDS] DATA START (BASE-16) =====
000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
===== [SMART READ ATTRIBUTE THRESHOLDS] DATA END (512 Bytes) =====
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented.
Error logging capability: (0x00) Error logging supported.
General Purpose Logging supported.
REPORT-IOCTL: DeviceFD=3 Command=SMART READ LOG InputParameter=1
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 01 00 4f 00 c2 00 b0 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=4 milliseconds
Incoming data, len=512 [only first 256 bytes shown]:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> Sense buffer, len=22:
00 72 0b 00 00 00 00 00 0e 09 0c 00 04 00 01 00 b4
10 00 4f 00 c2 00 51
status=2: [desc] sense_key=b asc=0 ascq=0
REPORT-IOCTL: DeviceFD=3 Command=SMART READ LOG returned 0
===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
===== [SMART READ LOG] DATA END (512 Bytes) =====
SMART Error Log Version: 0
No Errors Logged
REPORT-IOCTL: DeviceFD=3 Command=SMART READ LOG InputParameter=6
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 06 00 4f 00 c2 00 b0 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=0 milliseconds
Incoming data, len=512 [only first 256 bytes shown]:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> Sense buffer, len=22:
00 72 0b 00 00 00 00 00 0e 09 0c 00 04 00 01 00 b4
10 00 4f 00 c2 00 51
status=2: [desc] sense_key=b asc=0 ascq=0
REPORT-IOCTL: DeviceFD=3 Command=SMART READ LOG returned 0
===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
===== [SMART READ LOG] DATA END (512 Bytes) =====
SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging
---</smartctl 1>------------------------------------------------------------------------------------
---<kernel 1>------------------------------------------------------------------------------------
May 15 08:16:54 sol kernel: [ 221.680528] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
May 15 08:16:54 sol kernel: [ 221.680536] ata2.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0
May 15 08:16:54 sol kernel: [ 221.680537] res 40/00:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
May 15 08:16:54 sol kernel: [ 221.680539] ata2.00: status: { DRDY }
May 15 08:16:54 sol kernel: [ 221.680545] ata2: hard resetting link
May 15 08:16:55 sol kernel: [ 222.319062] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
May 15 08:16:55 sol kernel: [ 222.329415] ata2.00: configured for UDMA/133
May 15 08:16:55 sol kernel: [ 222.329424] ata2: EH complete
May 15 08:16:55 sol kernel: [ 222.329573] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
May 15 08:16:55 sol kernel: [ 222.329703] sd 1:0:0:0: [sda] Write Protect is off
May 15 08:16:55 sol kernel: [ 222.329706] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 15 08:16:55 sol kernel: [ 222.329980] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
---</kernel 1>------------------------------------------------------------------------------------
> On Thu, 15 May 2008, Tejun Heo wrote:
> > Jim Paris wrote:
> >> Tejun Heo wrote:
> >>> Tvrtko A. Ursulin wrote:
> >>>> On Wednesday 14 May 2008 08:58:56 Erik Inge Bolsø wrote:
> >>>>> The drive does say
> >>>>>
> >>>>> Enabled Supported:
> >>>>> SMART feature set
> >>>>> Security Mode feature set
> >>>>> * Power Management feature set
> >>>>> * Write cache
> >>>>> * Look-ahead
> >>>>>
> >>>>> ... so doesn't look like SMART is enabled on the drive.
> >>>>>
> >>>>> Does the problem go away if you do a
> >>>>>
> >>>>> smartctl -s on /dev/sda
> >>>>>
> >>>>> first? :)
> >>>>
> >>>> Indeed it does, shame on me for overseeing that small detail. :)
> >>>
> >>> Oh... shame on me too. :-)
> >>
> >> Why didn't smartctl notice that? In my experience it usually does
> >> report when SMART is disabled. Is the error not being properly
> >> reported back to userspace maybe? Tvrtko's original problem report
> >> has lots of uninitialized (or leaked?) data, and a lot of it looks
> >> like ASCII (for example his bogus RAW_VALUEs contain pieces of the
> >> model number).
> >
> > Let's ask Bruce. Bruce, SMART was disabled on WD3200AAKS but smartctl -a
> > didn't detect it and issued SMART commands anyway triggering timeouts.
> > Is this expected behavior? Or is libata feeding wrong status to
> > smartctl?
> >
> > Thanks.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2008-05-15 7:21 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-05-14 7:58 libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI Erik Inge Bolsø
2008-05-14 8:05 ` [RESOLVED] " Tvrtko A. Ursulin
2008-05-14 8:31 ` Tejun Heo
2008-05-14 19:36 ` Jim Paris
2008-05-15 3:44 ` Tejun Heo
2008-05-15 5:28 ` Bruce Allen
2008-05-15 7:21 ` Tvrtko A. Ursulin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.