From: Alexander Bartha <alex.xy.privat@gmx.at>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] ath9k WMP300nv2 (AR5416)
Date: Wed, 28 Jan 2009 14:17:22 +0100 [thread overview]
Message-ID: <20090128131722.218060@gmx.net> (raw)
In-Reply-To: <18812.40344.405972.672492@gargle.gargle.HOWL>
-------- Original-Nachricht --------
> Datum: Sun, 25 Jan 2009 22:42:56 +0530
> Von: Sujith <m.sujith@gmail.com>
> An: "Alexander Bartha" <alexander.bartha.office.rusz@gmx.at>
> CC: ath9k-devel at lists.ath9k.org
> Betreff: [ath9k-devel] ath9k WMP300nv2 (AR5416)
> Alexander Bartha wrote:
> > Hello to ath9k developers
> >
> > i am using:
> >
> > Distribution: gentoo
> > Kernel: 2.6.28-r1
> > Linux-Headers: 2.6.28-r1
> > Wireless Card: Linksys WMP300n v2 European
> > Router: Linksys WRT160n
>
> The easiest way is to just use compat-wireless.
> See: http://wireless.kernel.org/en/users/Download
>
> Sujith
> --
> http://sujith-m.blogspot.com
After building my kernel with cfg80211 and mac80211 as modules it was posible to install the compat-wirless drivers. And for the first time the worked! ifconfig tells me that my bandwith is only 1MBS and the ip i get from my LinksysWRT160 is renewed every 6Minutes. Later in the evening i make package updates (crda 0.9.5 to 1.0.1) my linksysWMP300nv2 card wont worke. The last message i get was link is not ready.
/var/log/messages before update:
an 27 15:01:53 ws1 [ 152.020563] cfg80211: Using static regulatory domain info
Jan 27 15:01:53 ws1 [ 152.020568] cfg80211: Regulatory domain: US
Jan 27 15:01:53 ws1 [ 152.020570] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 27 15:01:53 ws1 [ 152.020575] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
Jan 27 15:01:53 ws1 [ 152.020578] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 27 15:01:53 ws1 [ 152.020581] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 27 15:01:53 ws1 [ 152.020585] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 27 15:01:53 ws1 [ 152.020588] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 27 15:01:53 ws1 [ 152.020592] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
Jan 27 15:01:53 ws1 [ 152.020595] cfg80211: Calling CRDA for country: US
Jan 27 15:01:53 ws1 [ 152.040083] ath9k: 0.1
Jan 27 15:01:53 ws1 [ 152.040164] ath9k 0000:04:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Jan 27 15:01:53 ws1 [ 152.102946] cfg80211: Regulatory domain changed to country: US
Jan 27 15:01:53 ws1 [ 152.102951] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 27 15:01:53 ws1 [ 152.102956] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Jan 27 15:01:53 ws1 [ 152.102959] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Jan 27 15:01:53 ws1 [ 152.102963] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 27 15:01:53 ws1 [ 152.102966] (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 27 15:01:53 ws1 [ 152.102969] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Jan 27 15:01:54 ws1 [ 152.465925] phy0: Selected rate control algorithm 'ath9k_rate_control'
Jan 27 15:01:54 ws1 [ 152.467143] cfg80211: Calling CRDA for country: AT
Jan 27 15:01:54 ws1 [ 152.467188] Registered led device: ath9k-phy0:radio
Jan 27 15:01:54 ws1 [ 152.467213] Registered led device: ath9k-phy0:assoc
Jan 27 15:01:54 ws1 [ 152.467241] Registered led device: ath9k-phy0:tx
Jan 27 15:01:54 ws1 [ 152.467266] Registered led device: ath9k-phy0:rx
Jan 27 15:01:54 ws1 [ 152.467282] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81: mem=0xf9be0000, irq=20
Jan 27 15:01:54 ws1 [ 152.475534] cfg80211: Regulatory domain changed to country: AT
Jan 27 15:01:54 ws1 [ 152.475539] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 27 15:01:54 ws1 [ 152.475543] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 27 15:01:54 ws1 [ 152.475547] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 27 15:01:54 ws1 [ 152.475550] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 27 15:01:54 ws1 [ 152.475553] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 27 15:01:55 ws1 [ 153.371753] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 27 15:01:56 ws1 [ 154.337141] wlan0: authenticate with AP f5da96a8
Jan 27 15:01:56 ws1 [ 154.339093] wlan0: authenticated
Jan 27 15:01:56 ws1 [ 154.339097] wlan0: associate with AP f5da96a8
Jan 27 15:01:56 ws1 [ 154.344295] wlan0: RX AssocResp from f28f202a (capab=0x411 status=0 aid=1)
Jan 27 15:01:56 ws1 [ 154.344300] wlan0: associated
Jan 27 15:01:56 ws1 [ 154.352968] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan 27 15:01:56 ws1 wpa_cli: interface wlan0 CONNECTED
Jan 27 15:01:57 ws1 dhcpcd[8802]: wlan0: dhcpcd 4.0.7 starting
Jan 27 15:01:57 ws1 dhcpcd[8802]: wlan0: broadcasting for a lease
Jan 27 15:01:58 ws1 dhcpcd[8802]: wlan0: offered 192.168.1.100 from 192.168.1.1
Jan 27 15:01:58 ws1 dhcpcd[8802]: wlan0: checking 192.168.1.100 is available on attached networks
Jan 27 15:02:04 ws1 dhcpcd[8802]: wlan0: acknowledged 192.168.1.100 from 192.168.1.1
Jan 27 15:02:04 ws1 dhcpcd[8802]: wlan0: leased 192.168.1.100 for 86400 seconds
Jan 27 15:02:06 ws1 [ 164.757007] wlan0: no IPv6 routers present
/var/log/messages after crda update:
ws1 [ 475.022872] ath9k 0000:04:00.0: PCI INT A disabled
Jan 28 13:11:59 ws1 [ 475.022906] ath9k: Driver unloaded
Jan 28 13:12:34 ws1 rc-scripts: WARNING: net.wlan0 has not yet been started.
Jan 28 13:12:45 ws1 [ 520.974197] cfg80211: Using static regulatory domain info
Jan 28 13:12:45 ws1 [ 520.974202] cfg80211: Regulatory domain: US
Jan 28 13:12:45 ws1 [ 520.974205] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 28 13:12:45 ws1 [ 520.974209] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
Jan 28 13:12:45 ws1 [ 520.974213] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 28 13:12:45 ws1 [ 520.974216] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 28 13:12:45 ws1 [ 520.974219] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 28 13:12:45 ws1 [ 520.974223] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 28 13:12:45 ws1 [ 520.974226] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
Jan 28 13:12:45 ws1 [ 520.974230] cfg80211: Calling CRDA for country: US
Jan 28 13:12:45 ws1 [ 520.992789] ath9k: 0.1
Jan 28 13:12:45 ws1 [ 520.992829] ath9k 0000:04:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Jan 28 13:12:46 ws1 [ 521.420252] phy0: Selected rate control algorithm 'ath9k_rate_control'
Jan 28 13:12:46 ws1 [ 521.421635] cfg80211: Calling CRDA for country: AT
Jan 28 13:12:46 ws1 [ 521.421683] Registered led device: ath9k-phy0:radio
Jan 28 13:12:46 ws1 [ 521.421708] Registered led device: ath9k-phy0:assoc
Jan 28 13:12:46 ws1 [ 521.421732] Registered led device: ath9k-phy0:tx
Jan 28 13:12:46 ws1 [ 521.421756] Registered led device: ath9k-phy0:rx
Jan 28 13:12:46 ws1 [ 521.421773] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81: mem=0xf9520000, irq=20
Jan 28 13:12:47 ws1 [ 522.336623] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Is the only way to use the old crda???
Please help
kind regards
Alexander Bartha
--
NUR NOCH BIS 31.01.! GMX FreeDSL - Telefonanschluss + DSL
f?r nur 16,37 EURO/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a
next prev parent reply other threads:[~2009-01-28 13:17 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-24 18:49 [ath9k-devel] ath9k WMP300nv2 (AR5416) Alexander Bartha
2009-01-25 17:12 ` Sujith
2009-01-28 13:17 ` Alexander Bartha [this message]
2009-01-28 19:33 ` Luis R. Rodriguez
[not found] ` <20090129192832.83600@gmx.net>
2009-01-29 19:46 ` Luis R. Rodriguez
2009-01-30 5:39 ` [ath9k-devel] Problem compiling latest compate wirless Amit Sood
2009-01-30 6:31 ` Luis R. Rodriguez
[not found] ` <704147.74610.qm@web95016.mail.in2.yahoo.com>
2009-01-30 16:13 ` Luis R. Rodriguez
2009-01-31 13:50 ` Amit Sood
[not found] ` <20090130162123.104260@gmx.net>
[not found] ` <20090130165946.GE6534@tesla>
[not found] ` <20090130224802.194360@gmx.net>
2009-02-02 17:49 ` [ath9k-devel] ath9k WMP300nv2 (AR5416) Luis R. Rodriguez
[not found] <20090202234254.GI17941@tesla>
[not found] ` <20090203172701.137550@gmx.net>
[not found] ` <20090203173228.GB9713@tesla>
[not found] ` <20090203180007.137530@gmx.net>
[not found] ` <20090203182537.GA15591@tesla>
[not found] ` <20090203184632.137560@gmx.net>
[not found] ` <20090203190955.GB15591@tesla>
[not found] ` <20090203201941.242400@gmx.net>
[not found] ` <20090203212317.GA25036@tesla>
[not found] ` <20090204194544.158460@gmx.net>
[not found] ` <20090204214334.GF5581@tesla>
2009-02-06 20:22 ` Alexander Bartha
2009-02-06 21:18 ` Luis R. Rodriguez
2009-02-14 23:06 ` Alexander Bartha
2009-02-15 1:18 ` Luis R. Rodriguez
2009-02-16 20:51 ` Alexander Bartha
2009-02-16 21:42 ` Luis R. Rodriguez
2009-02-20 17:44 ` Alexander Bartha
2009-02-20 17:46 ` Alexander Bartha
2009-02-20 18:28 ` Pavel Roskin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090128131722.218060@gmx.net \
--to=alex.xy.privat@gmx.at \
--cc=ath9k-devel@lists.ath9k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.