* [U-Boot] u-boot-v2 rc7
@ 2009-02-25 21:04 John Jeffers
2009-02-25 21:35 ` [U-Boot] [ptxdist] " Robert Schwebel
0 siblings, 1 reply; 2+ messages in thread
From: John Jeffers @ 2009-02-25 21:04 UTC (permalink / raw)
To: u-boot
In "~/u-boot-v2/board/pcm038/env/config
(and in most other boards in v2)
the following is found:
/****+
autoboot_timeout=3
nfsroot="/ptx/work/octopus/rsc/svn/oselas/bsp/phytec/phyCORE-i.MX27/OSELAS.BSP-Phytec-phyCORE-i.MX27-trunk/root"
bootargs="console=ttymxc0,115200"
-****/
I believe this causes certain scripting in ptxdist to fail "~>ptxdist
test setenv<cr>" since it is setting up uboot configuration for Robert
S.'s machine. It does not actually "hurt" u-boot-v2 rc7 since the
knowledgeable user will make this go away for his board.
Likely the community would be better served if there was a comment as
the following:
#really make sure this points to the nfs root source. Assuming the BSP
was at the user home. ~>
nfsroot="/OSELAS.BSP-Phytec-phyCORE-8/projectroot"
It may be useful to fix this as a question to the user.//
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] [ptxdist] u-boot-v2 rc7
2009-02-25 21:04 [U-Boot] u-boot-v2 rc7 John Jeffers
@ 2009-02-25 21:35 ` Robert Schwebel
0 siblings, 0 replies; 2+ messages in thread
From: Robert Schwebel @ 2009-02-25 21:35 UTC (permalink / raw)
To: u-boot
On Wed, Feb 25, 2009 at 03:04:56PM -0600, John Jeffers wrote:
> In "~/u-boot-v2/board/pcm038/env/config
> (and in most other boards in v2)
>
> the following is found:
> /****+
> autoboot_timeout=3
>
> nfsroot="/ptx/work/octopus/rsc/svn/oselas/bsp/phytec/phyCORE-i.MX27/OSELAS.BSP-Phytec-phyCORE-i.MX27-trunk/root"
>
> bootargs="console=ttymxc0,115200"
> -****/
> I believe this causes certain scripting in ptxdist to fail "~>ptxdist
> test setenv<cr>" since it is setting up uboot configuration for Robert
> S.'s machine. It does not actually "hurt" u-boot-v2 rc7 since the
> knowledgeable user will make this go away for his board.
The automatic setup scripts in OSELAS.BSPs using this board should do
the right thing, the 'test setenv' script will push a well defined
environment into the box.
> Likely the community would be better served if there was a comment as
> the following:
>
> #really make sure this points to the nfs root source. Assuming the BSP
> was at the user home. ~>
> nfsroot="/OSELAS.BSP-Phytec-phyCORE-8/projectroot"
>
> It may be useful to fix this as a question to the user.//
Yes, good idea, please send a proper patch that fixes all of these
issues.
rsc
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-02-25 21:35 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-02-25 21:04 [U-Boot] u-boot-v2 rc7 John Jeffers
2009-02-25 21:35 ` [U-Boot] [ptxdist] " Robert Schwebel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.