* [GIT]: Networking
@ 2008-12-28 8:01 ` David Miller
0 siblings, 0 replies; 39+ messages in thread
From: David Miller @ 2008-12-28 8:01 UTC (permalink / raw)
To: torvalds; +Cc: akpm, netdev, linux-kernel
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: Text/Plain; charset=utf-8, Size: 175386 bytes --]
Here are the pending networking changes for the 2.6.29 merge window.
A lot of what you see follows the usual boiler plate. A driver
maintainer making a lot of changes to driver FOO. Similarly for
maintainers of networking protocols. Another person does a series of
similar sparse warning fixes, etc.
And of course my list of changes is largely composed of merges.
But here are the interesting other changes in here:
1) Socket hashes converted to RCU locking by Eric Dumazet.
Some really excellent stuff, and he's also done some
things to help out socket open/close scalability. Eric
also has some VFS layer changes under review with the
VFS folks to make that area even better.
2) Harvey Harrison has added some new %pX formatting handlers
for ethernet MAC addresses, ipv4 addresses, and ipv6 addresses.
3) Alexey Dobriyan, Benjamin Thery, Daniel Lezcano, and
Eric W. Biederman have made more large strides in namespace
support for networking.
4) Stephen Hemminger has started the long laborious but useful
process of seperating the driver callbacks out of the
network device struct. All unconverted drivers still work
just fine during this transition period, at pretty much no
cost to the fast paths.
5) Ilpo Järvinen implemented resegmentation for the retransmit
queue. This is a very powerful operation which cures the most
expensive aspects during fast recovery after a loss. In such
cases we have to hold onto an entire window of data, and if
that window is very large then when the missing chunk gets
filled in we loop for a long time freeing tons of SKBs.
So as the SACK information advances the edge of packets
received in order, we can coalesce these portions back into
one large TSO'ish SKB. As a result, when the missing piece
of the window is filled in, we do only a small number of
SKB frees. It basically divides the work more evenly over
the process of recovery.
6) Wang Chen went through the entire tree and made sure every
networking driver uses netdev_priv() to get at the driver
private. And as a result we could eliminate the struct netdev
"priv" member entirely.
This set of changes helped spot a few bugs and driver private
memory lifetime issues.
7) Benchmarks over loopback hit the dev->last_rx shared data real
hard on SMP boxes. This jiffies state is only used by bonding,
so we've rearranged things such that only the bonding path even
tries to set this thing.
This work was done by Jay Vosburgh.
Please pull, thanks a lot!
The following changes since commit 4a6908a3a050aacc9c3a2f36b276b46c0629ad91:
Linus Torvalds (1):
Linux 2.6.28
are available in the git repository at:
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-next-2.6.git master
Abbas, Mohamed (3):
iwl3945: add debugfs support
iwl3945: Fix iwl3945 rate scaling.
iwl3945: Fix rate scale for B-mode connection
Abhijeet Kolekar (3):
iwlwifi : fix checkpatch.pl errors
iwl3945 : Fix ad-hoc mode for 3945
iwl3945 : Fix a-band association for passive channels
Adrian Bunk (1):
The overdue eepro100 removal.
Al Viro (1):
ixgbe: section fixes
Alan Cox (2):
tty: Flags should be accessed via the foo_bit interfaces
tty: driverdata and discdata are void *
Alexander Duyck (20):
e1000e: enable ECC correction on 82571 silicon
igb: update name to reflect new hardware
igb: simplify swap in clean_rx_irq if using packet split
igb: Fix tx/rx_ring_count parameters for igb on suspend/resume/ring resize
ixgbe: this patch adds support for DCB to the kernel and ixgbe driver
DCB: Add interface to query for the DCB capabilities of an device.
DCB: Add interface to query # of TCs supported by device
DCB: Add interface to query the state of PFC feature.
DCB: Add support for DCB BCN
e1000e: disable correctable errors for quad ports while going to D3
igb: do not use phy ops in ethtool test cleanup for non-copper parts
igb: remove unneeded bit refrence when enabling jumbo frames
igb: loopback bits not correctly cleared from RCTL register
igb: link up/down messages must follow a specific format
igb: Add support for pci-e Advanced Error Reporting
igb/e1000e: Naming interrupt vectors
igb: update handling of RCTL for smaller buffer sizes
igb: Correctly determine pci-e function number in virtual environment
igb: defeature tx head writeback
igb: re-order queues to support cleaner use of ivar on 82576
Alexey Dobriyan (85):
net: reduce structures when XFRM=n
net: don't use INIT_RCU_HEAD
xfrm: C99 for xfrm_dev_notifier
xfrm: remove unused struct xfrm_policy::next
net: '&' redux
netfilter: netns-aware ipt_addrtype
netfilter: arptable_filter: merge forward hook
netfilter: netns ebtables: part 1
netfilter: netns ebtables: part 2
netfilter: netns ebtables: more cleanup during ebt_unregister_table()
netfilter: netns ebtables: ebtable_broute in netns
netfilter: netns ebtables: ebtable_filter in netns
netfilter: netns ebtables: ebtable_nat in netns
netfilter: netns ebtables: br_nf_pre_routing_finish() fixup
net: #ifdef ->sk_security
net: mark flow_cache_cpu_prepare() as __init
net: remove struct neigh_table::pde
net: remove struct dst_entry::entry_size
net: ifdef struct sock::sk_async_wait_queue
net: use %pF for /proc/net/ptype
ematch: simpler tcf_em_unregister()
netfilter: xt_recent: don't save proc dirs
netfilter: ip6table_filter: merge LOCAL_IN and FORWARD hooks
netfilter: nf_conntrack_proto_gre: spread __exit
net: fix tunnels in netns after ndo_ changes
ah4/ah6: remove useless NULL assignments
xfrm: remove useless forward declarations
xfrm: initialise xfrm_policy_gc_work statically
netns xfrm: add netns boilerplate
netns xfrm: add struct xfrm_state::xs_net
netns xfrm: per-netns xfrm_state_all list
netns xfrm: per-netns xfrm_state_bydst hash
netns xfrm: per-netns xfrm_state_bysrc hash
netns xfrm: per-netns xfrm_state_byspi hash
netns xfrm: per-netns xfrm_state_hmask
netns xfrm: per-netns xfrm_state counts
netns xfrm: per-netns xfrm_hash_work
netns xfrm: per-netns state GC list
netns xfrm: per-netns state GC work
netns xfrm: per-netns km_waitq
netns xfrm: add struct xfrm_policy::xp_net
netns xfrm: per-netns policy list
netns xfrm: per-netns xfrm_policy_byidx hash
netns xfrm: per-netns xfrm_policy_byidx hashmask
netns xfrm: per-netns inexact policies
netns xfrm: per-netns xfrm_policy_bydst hash
netns xfrm: per-netns policy counts
netns xfrm: per-netns policy hash resizing work
netns xfrm: propagate netns into bydst/bysrc/byspi hash functions
netns xfrm: trivial netns propagations
netns xfrm: state flush in netns
netns xfrm: state lookup in netns
netns xfrm: fixup xfrm_alloc_spi()
netns xfrm: finding states in netns
netns xfrm: state walking in netns
netns xfrm: propagate netns into policy byidx hash
netns xfrm: policy insertion in netns
netns xfrm: policy flushing in netns
netns xfrm: finding policy in netns
netns xfrm: policy walking in netns
netns xfrm: lookup in netns
netns xfrm: xfrm_policy_check in netns
netns xfrm: xfrm_route_forward() in netns
netns xfrm: flushing/pruning bundles in netns
netns xfrm: dst garbage-collecting in netns
netns xfrm: xfrm_input() fixup
netns xfrm: per-netns NETLINK_XFRM socket
netns xfrm: xfrm_user module in netns
netns xfrm: pass netns with KM notifications
netns xfrm: KM reporting in netns
netns xfrm: ->dst_lookup in netns
netns xfrm: ->get_saddr in netns
netns xfrm: flush SA/SPDs on netns stop
netns PF_KEY: part 1
netns PF_KEY: part 2
netns PF_KEY: per-netns /proc/pfkey
netns xfrm: AH/ESP in netns!
netns xfrm: per-netns MIBs
netns xfrm: /proc/net/xfrm_stat in netns
netns xfrm: per-netns sysctls
netdev: remove pathetic compile-command lines
hydra: fix compilation
simeth: convert to net_device_ops
netns: igmp: allow IPPROTO_IGMP sockets in netns
netns: igmp: make /proc/net/{igmp,mcfilter} per netns
Alexey Fisher (1):
ipw2200: make association only if SSID is known.
Andrew Morton (1):
drivers/net/smc911x.c: smc911x_drv_probe() cleanup
Andrey Borzenkov (3):
orinoco: reload firmware on resume
orinoco: cache downloadable firmware image in memory for use during resume
orinoco: indicate it is using dBm in wireless_stats and spy
Andrey Yurovsky (4):
ath5k: fix mesh point operation
mac80211: allow all interfaces types to handle RX action frames
mac80211: disable BSSID filtering for mesh interfaces
mac80211_hwsim: enable Mesh Point operation
Andy Fleming (6):
gianfar: Use gfar_halt to stop DMA in gfar_probe
gianfar: Convert gianfar to an of_platform_driver
gianfar: Add macros for stepping through BDs
phylib: Remove unnecessary "reset" fixups in genphy_setup_forced
gianfar: Fix packet drop when out of memory
gianfar: Continue polling until both tx and rx are empty
Andy Gospodarek (1):
bonding: update docs to correctly reflect arp_ip_target behavior
Andy Whitcroft (1):
netfilter: ip{,6}t_policy.h should include xp_policy.h
Anna Neal (2):
libertas: Fine grained configuration of wake-on-lan.
libertas: Create sysfs entry for changing the mesh probe response limit
Anton Vorontsov (7):
ucc_geth: Fix endless loop in stop_{tx,rx} routines
ucc_geth: Fix TX watchdog timeout handling
ucc_geth: Fix IRQ freeing code in ucc_geth_open()
ucc_geth: Cleanup repetitive ucc_geth_memclean() calls
ucc_geth: Fix IO memory (un)mapping code
ucc_geth: Remove UGETH_FILTERING dead code
ucc_geth: Eliminate the need for forward references
Arjan van de Ven (1):
pci: use pci_ioremap_bar() in drivers/net
Arnaldo Carvalho de Melo (1):
dccp_diag: LISTEN sockets don't have CCIDs
Arnaud Ebalard (1):
net: Remove unused parameter of xfrm_gen_index()
Atsushi Nemoto (2):
tc35815: Define more Rx status bits
tc35815: Enable StripCRC feature
Balazs Scheidler (1):
TPROXY: implemented IP_RECVORIGDSTADDR socket option
Baruch Siach (1):
enc28j60: reduce the number of spi transfers in enc28j60_set_bank()
Ben Greear (1):
ipv4: Fix ARP behavior with many mac-vlans
Ben Hutchings (41):
sfc: Correct address of gPXE boot configuration in EEPROM
sfc: Clean up non-volatile memory partitioning
sfc: Expose flash region storing boot code as MTD
sfc: Use lm87 and lm90 drivers for board temperature/power monitoring
sfc: Do not reset when hardware monitor detects a fault
sfc: Fix dependency for SFC_MTD
sfc: Board support fixes
sfc: Change SPI lengths to type size_t
sfc: Remove unneeded register write
sfc: Correct interpretation of second param to ethtool phys_id()
sfc: Clean up waits for flash/EEPROM operations
sfc: Work around unreliable strap pins
sfc: Restore phy_flash_cfg module parameter
sfc: Provide hints to irqbalance daemon
sfc: Abbreviate self-test names so they are not truncated
sfc: Don't count RX checksum errors during loopback self-test
sfc: Remove MII extension cruft
sfc: Add support for MMDs numbered >15
sfc: Add phy_type device attribute
sfc: Clean up board identification
sfc: Clean up MDIO flag setting
sfc: Add support for sub-10G speeds
sfc: Implement auto-negotiation
sfc: Rework MAC, PHY and board event handling
sfc: Add support for Solarflare 10Xpress SFT9001
sfc: Add support for SFN4111T
sfc: Remove leading spaces
sfc: Specify a meaningful component for loopback RX-side and PHY tests
sfc: Use mutex_lock_interruptible() for ethtool EEPROM access
sfc: Use model numbers for PHY type names
sfc: Use kzalloc() to ensure struct efx_spi_device is fully initialised
sfc: Fix synchronisation of efx_mtd_{probe,rename,remove}
sfc: Version 2.3
sfc: Generate unique names for per-NIC workqueues
sfc: Fix unreliable link detection in some loopback modes
sfc: Clean up PHY mode management in loopback self-test
sfc: Merge top-level functions for self-tests
sfc: Add support for multiple PHY self-tests
sfc: SFT9001: Add cable diagnostics
sfc: When disabling the NIC, close the device rather than unregistering it
sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
Benjamin Thery (11):
net: fix /proc/net/ip_mr_cache display - V2
net: /proc/net/ip_mr_cache, display Iif as a signed short
netns: ip6mr: allocate mroute6_socket per-namespace.
netns: ip6mr: dynamically allocates vif6_table
netns: ip6mr: store netns in struct mfc6_cache
netns: ip6mr: dynamically allocate mfc6_cache_array
netns: ip6mr: declare counter cache_resolve_queue_len per-namespace
netns: ip6mr: declare mroute_do_assert and mroute_do_pim per-namespace
netns: ip6mr: declare reg_vif_num per-namespace
netns: ip6mr: declare ip6mr /proc/net entries per-namespace
netns: ip6mr: enable namespace support in ipv6 multicast forwarding code
Benoit PAPILLAULT (2):
ath9k : Display MAC/BB and RF version at startup (v2)
ath5k: fix 802.11 header padding on RX, unpadding on TX
Bob Copeland (11):
mac80211: fix a few typos in mac80211 kernel doc
ath9k: remove useless conditional
ath5k: fix keytable type buglet in ath5k_hw_reset_key
ath5k: enable hardware encryption for WEP
ath5k: update keycache to support TKIP handling
ath5k: set mac address in add_interface
ath5k: preserve higher order bits when setting mac address
ath5k: clean up ath5k_hw_set_key
ath5k: enable combined michael mic in key cache
ath5k: fix endianness of bitwise ops when installing mic
ath5k: correct packet length in tx descriptors
Brian Haley (1):
bonding: send IPv6 neighbor advertisement on failover
Brice Goglin (7):
myri10ge: fix per-slice rx/tx_dropped counters
myri10ge: remove hardcoded sram_size
myri10ge: update DCA comments
myri10ge: update firmware headers
myri10ge: check fragmentation in LRO get_frag_header()
myri10ge: update firmware headers to 1.4.37
myri10ge: update driver version to 1.4.4-1.395
Bruce Allan (11):
e1000e: commit speed/duplex changes for m88 PHY
e1000e: 82571 check for link fix on 82571 serdes
e1000e: update comments listing supported parts for each MAC family
e1000e: check return of pci_save_state
e1000e: ESB2 config after link up
e1000e: link up/down messages must follow a specific format
e1000e: sync change flow control variables with ixgbe
e1000e: cosmetic newline in debug message
e1000e: store EEPROM version number to prevent unnecessary NVM reads
e1000e: fix incorrect link status when switch module pulled
e1000e: check return code from NVM accesses and fix bank detection
Chaithrika U S (1):
phy: Add LSI ET1011C PHY driver
Chatre, Reinette (2):
iwlwifi: replace magic constants with define
iwlwifi: store ucode version number
Chr (1):
p54: initialize all deprecated fields
Christian Lamparter (30):
p54: honour bss_info_changed's short slot time settings
p54: broken out edcf changes
p54: refactor statistic timer code
p54: p54: refactor p54_rx_frame_sent
p54: fix memory management
p54: borrow some setup code from stlc45xx
p54: introduce new names for device firmwares
p54: more definitions form lmac_longbow.h and pda.h
p54: put broadcast frames into the right queues
p54: AP & Ad-hoc testing
p54: enable Mesh Point support
p54: minor fixes
p54pci: cache firmware for suspend/resume
p54: honour bss_info_changed's basic_rates and other settings
p54: fix wmm queue settings
mac80211: add sta_notify_ps callback
p54: revamp station power save management in access point mode
p54: utilize cryptographic accelerator
p54: include support for 2.13.24.0 USB LM87 Firmwares
p54: refactoring
p54: per-device names
p54usb: rewriting rx/tx routines to make use of usb_anchor's facilities
mac80211: integrate sta_notify_ps cmds into sta_notify
p54: enforce strict tx_queue limits
p54: fix oops on faulty devices
p54: move statistic timer update routine into a workqueue
p54: update ACK failure statistic counter in real-time
p54: more accurate rssi to dBm conversion
p54: remove free_on_tx parameter
p54usb: bring first generation devices back to life
Colin McCabe (1):
ath9k: Replace ath9k_opmode with nl80211_iftype
Cyrill Gorcunov (2):
net: ppp_generic - use idr technique instead of cardmaps
net: ppp_generic - use DEFINE_IDR for static initialization
Dai Haruki (9):
gianfar: Optimize interrupt coalescing configuration
gianfar: Fix eTSEC configuration procedure
gianfar: Fix VLAN HW feature related frame/buffer size calculation.
gianfar: Enable padding and Optimize the frame prepended bytes handling
gianfar: Remove unused gfar_add_fcb() function parameter
gianfar: Make all BD status writes 32-bit
gianfar: Add Scatter Gather support
gianfar: Use interface name in interrupt name to distinguish the source.
gianfar: Merge Tx and Rx interrupt for scheduling clean up ring
Daniel C. Halperin (1):
iwlwifi: convert correctly rate_n_flags to PLCP index for mimo3 packets
Daniel Halperin (1):
iwlwifi: Update reclaim flag
Daniel Lezcano (3):
veth: Remove useless veth field
veth: remove unused list
netns: filter out uevent not belonging to init_net
Daniel Silverstone (1):
net: Add support for the KS8695 ethernet devices.
Dave Jones (1):
net: Allow dependancies of FDDI & Tokenring to be modular.
David Brownell (1):
pegasus: minor resource shrinkage
David Kilroy (8):
orinoco: Move sources to a subdirectory
orinoco: Separate fw caching from download
orinoco: Cache Symbol firmware
orinoco: Resume spectrum_cs in the same way as orinoco_cs
orinoco: Provide option to avoid unnecessary fw caching
orinoco: Fix function names used in debug strings
orinoco: Fix inappropriate use of IRQ_BAP
spectrum_cs: Fix function names used in debug strings
David S. Miller (49):
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
Merge branch 'davem-next' of master.kernel.org:/.../jgarzik/netdev-2.6
sunrpc: Fix build warning due to typo in %pI4 format changes.
drivers/net: Kill now superfluous ->last_rx stores.
net/: Kill now superfluous ->last_rx stores.
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
Merge branch 'davem-next' of master.kernel.org:/.../jgarzik/netdev-2.6
Revert "net: Guaranetee the proper ordering of the loopback device."
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-next-2.6
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-next-2.6
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
dm9000: Fix build error.
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
inet_diag: Missed conversion after changing inet ehash lockl to spinlocks.
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-next-2.6
Merge branch 'for-david' of git://git.kernel.org/.../chris/linux-2.6
net: Make sure BHs are disabled in sock_prot_inuse_add()
axnet_cs: Fix build after net device ops ne2k conversion.
Revert "hso: Add TIOCM ioctl handling."
Revert "hso: Fix free of mutexes still in use."
Revert "hso: Fix crashes on close."
smc-mca: Fix build failure due to typo.
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-next-2.6
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
Merge branch 'master' of git://git.kernel.org/.../kaber/nf-next-2.6
phy: Add file missed in previous commit.
Merge branch 'master' of ssh://master.kernel.org/.../rusty/linux-2.6-for-linus
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
Merge branch 'master' of git://git.kernel.org/.../holtmann/bluetooth-next-2.6
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-next-2.6
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
bluetooth: Fix rfcomm_sock_ioctl() build failure with debugging enabled.
bluetooth: Fix unused var warning properly in rfcomm_sock_ioctl().
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-next-2.6
8390/8390p: Fix compat netdev ops handling.
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
bnx2: Don't redefine FLOW_CTRL_{RX,TX}.
bnx2x: Fix namespace collision with FLOW_CTRL_{TX,RX}
Revert "net: release skb->dst in sock_queue_rcv_skb()"
Revert "xfrm: Accept ESP packets regardless of UDP encapsulation mode"
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-next-2.6
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
Merge branch 'for-david' of git://git.kernel.org/.../chris/linux-2.6
net: Fix warning fallout from recent NAPI interface changes.
igb: Fix build warning when DCA is disabled.
Merge branch 'master' of ../net-next-2.6/ into net2629
David Woodhouse (2):
atm: 32-bit ioctl compatibility
atm: Driver for Solos PCI ADSL2+ card.
Denis Joseph Barrow (6):
hso: Add new usb device id's.
hso: Fix crashes on close.
hso: Fix URB submission -EINVAL.
hso: Fix free of mutexes still in use.
hso: Add TIOCM ioctl handling.
hso: Hook up ->reset_resume
Divy Le Ray (8):
cxgb3 - enable lro control through ethtool
cxgb3: set hard_xmit in the netdev_ops
cxgb3: avoid potential memory leak.
cxgb3: integrate FW and protocol engines in the kernel
cxgb3: Update FW loading path.
cxgb3: Add multiple Tx queue support.
cxgb3: untie strict FW matching
cxgb3: add control to access embedded images
Don Skidmore (4):
net: fix dcbnl_setnumtcs operation check
net: fix DCB setstate to return success/failure
net: add DCNA attribute to the BCN interface for DCB
ixgbe: fix the display of DCB control stats in ethtool
Donald Skidmore (1):
ixgbe: add SFP+ driver support
Ed Swierk (1):
forcedeth: power down phy when interface is down
Emmanuel Grumbach (2):
iwlwifi: rename generic iwlagn functions that had a HW specific name
iwlwifi: rename double inclusion protection name in iwl-commands.h
Eric Dumazet (43):
udp: introduce struct udp_table and multiple spinlocks
udp: RCU handling for Unicast packets.
udp: calculate udp_mem based on low memory instead of all memory
udp: udp_get_next() should use spin_unlock_bh()
udp: introduce sk_for_each_rcu_safenext()
udp: Should use spin_lock_bh()/spin_unlock_bh() in udp_lib_unhash()
udp: add a missing smp_wmb() in udp_lib_get_port()
net: sk_free_datagram() should use sk_mem_reclaim_partial()
net: Introduce read_pnet() and write_pnet() helpers
net: ib_net pointer should depends on CONFIG_NET_NS
net: Cleanup of neighbour code
net: speedup dst_release()
rcu: Introduce hlist_nulls variant of hlist
udp: Use hlist_nulls in UDP RCU code
net: Convert TCP & DCCP hash tables to use RCU / hlist_nulls
rcu: documents rculist_nulls
net: make sure struct dst_entry refcount is aligned on 64 bytes
net: Cleanup of af_unix
net: af_unix can make unix_nr_socks visbile in /proc
net: af_unix should update its inuse counter
net: sctp should update its inuse counter
net: af_packet should update its inuse counter
net: make /proc/net/protocols namespace aware
net: inet_diag_handler structs can be const
net: af_unix should use KERN_INFO instead of KERN_DEBUG
net: listening_hash get a spinlock per bucket
net: convert TCP/DCCP ehash rwlocks to spinlocks
net: use net_eq() in INET_MATCH and INET_TW_MATCH
net: some optimizations in af_inet
net: af_netlink should update its inuse counter
net: Convert TCP/DCCP listening hash tables to use RCU
eth: Declare an optimized compare_ether_addr_64bits() function
net: Make sure BHs are disabled in sock_prot_inuse_add()
net: Make sure BHs are disabled in sock_prot_inuse_add()
net: avoid a pair of dst_hold()/dst_release() in ip_append_data()
net: avoid a pair of dst_hold()/dst_release() in ip_push_pending_frames()
net: Make sure BHs are disabled in sock_prot_inuse_add()
net: udp_unhash() can test if sk is hashed
net: Use a percpu_counter for sockets_allocated
net: Use a percpu_counter for orphan_count
net: release skb->dst in sock_queue_rcv_skb()
net: percpu_counter_inc() should not be called in BH-disabled section
vlan: fix convertion to net_device_ops
Eric Leblond (4):
netfilter: xt_NFLOG: don't call nf_log_packet in NFLOG module.
netfilter: nfmark routing in OUTPUT, mangle, NFQUEUE
netfilter: nfmark IPV6 routing in OUTPUT, mangle, NFQUEUE
netfilter: xt_NFLOG is dependant of nfnetlink_log
Eric W. Biederman (6):
netns: Coexist with the sysfs limitations v2
netns: Delete virtual interfaces during namespace cleanup
net: Guaranetee the proper ordering of the loopback device.
net: Don't leak packets when a netns is going down
net: fib_rules ordering fixes.
net: Guaranetee the proper ordering of the loopback device. v2
Fabio Rossi (1):
mac80211: accept empty strings for hidden SSIDs
Fabrice Bellet (1):
iwl3945: iwl3945_mac_get_tsf() should not return zero
Felix Fietkau (4):
minstrel: improve performance for non-MRR drivers
ath5k: ignore the return value of ath5k_hw_noise_floor_calibration
mac80211: fix BUILD_BUG_ON() caused by misalignment on arm
ath5k: Clean up eeprom parsing and add missing calibration data
Florian Fainelli (1):
r6040: bump release number to 0.19
Francois Romieu (1):
r8169: convert to net_device_ops
Gerrit Renker (33):
dccp: Basic data structure for feature negotiation
dccp: Implement lookup table for feature-negotiation information
dccp: List management for new feature negotiation
dccp: Per-socket initialisation of feature negotiation
dccp: Cleanup routines for feature negotiation
dccp: Limit feature negotiation to connection setup phase
dccp: Registration routines for changing feature values
dccp: Query supported CCIDs
dccp: Resolve dependencies of features on choice of CCID
dccp: Mechanism to resolve CCID dependencies
dccp: Deprecate old setsockopt framework
dccp: Feature negotiation for minimum-checksum-coverage
dccp: Deprecate Ack Ratio sysctl
dccp: Tidy up setsockopt calls
dccp: Fix bracing in dccp_feat_list_lookup.
dccp: Set per-connection CCIDs via socket options
dccp: API to query the current TX/RX CCID
dccp: Increase the scope of variable-length htonl/ntohl functions
dccp: Support for Mandatory options
dccp: Header option insertion routine for feature-negotiation
dccp: Insert feature-negotiation options into skb
dccp: Integrate feature-negotiation insertion code
dccp: Preference list reconciliation
dccp: Process incoming Change feature-negotiation options
dccp: Processing Confirm options
dccp: Feature activation handlers
dccp: Integration of dynamic feature activation - part 1 (socket setup)
dccp: Integration of dynamic feature activation - part 2 (server side)
dccp: Integration of dynamic feature activation - part 3 (client side)
dccp: Clean up old feature-negotiation infrastructure
dccp: Remove obsolete parts of the old CCID interface
dccp: Remove manual influence on NDP Count feature
dccp ccid-2: Phase out the use of boolean Ack Vector sysctl
Giuseppe Cavallaro (3):
phy: add natsemi PHY driver
phy: power management support
phy: add the ST ste10Xp PHYs
Guo-Fu Tseng (1):
jme: Remove 64 and 40 bit dma_mask
Halperin, Daniel C (2):
iwlwifi: update iwl-commands.h for 3 stream support
iwlwifi: implement iwl_debug_report_frame for iwlagn
Hannes Eder (37):
pkt_sched: fix sparse warning
mISDN: use NULL pointer instead of plain integer
mISDN: consistently define 'debug' as '*u_int'
mISDN: make global symbols static or include header files
mISDN: un-export symbol 'plx_lock'
mISDN: fix sparse warning: symbol 'nskb' shadows an earlier one
mISDN: fix sparse warning: symbol 'id' shadows an earlier one
mISDN: comment out unused symbols
mISDN: timerdev: use __user for mISDN_read's buffer argument
mISDN: hfcmulti: use __iomem address space modifier
isdn: eicon: fix sparse warning: make global functions static
drivers/net: fix sparse warning: use ANSI-style function declaration
drivers/net: fix sparse warnings: make do-while a compound statement
drivers/net: fix sparse warning: returning void-valued expression
drivers/net: fix sparse warnings: make symbols static
drivers/net/arcnet: fix sparse warnings: make symbols static
drivers/net/atlx: fix sparse warnings: make symbols static
drivers/net/bonding: fix sparse warnings: move decls to header file
drivers/net/cxgb3: comment out dead code
drivers/net/e1000e: fix sparse warnings: make symbols static
drivers/net/enic: fix sparse warning: make symbol static
drivers/net/igb: remove dead code (function 'igb_read_pci_cfg')
drivers/net/irda: fix sparse warnings: make symbols static
drivers/net/ixgbe: fix sparse warnings: make symbols static
drivers/net/netxen: fix sparse warnings: use NULL pointer instead of plain integer
drivers/net/qlge: fix sparse warnings: make symbols static
drivers/net/skfp: fix sparse warnings: make symbols static
drivers/net/tokenring: fix sparse warnings: make symbols static
drivers/net/tulip: fix sparse warnings: make do-while a compound statement
drivers/net/wan: fix sparse warnings: make do-while a compound statement
drivers/net/wan: fix sparse warning: make symbol static
drivers/net/wan/z85230.c: fix sparse warnings: un-EXPORT symbols
drivers/net/wireless: fix sparse warnings: make symbols static
drivers/net/wireless/ath9k: fix sparse warnings: make symbols static
drivers/net/wireless/b43: fix sparse warnings: make symbols static
drivers/net/wireless/ipw2x00: fix sparse warnings: make symbols static
drivers/net/wireless/prism54: fix sparse warnings: make symbols static
Hannes Hering (1):
ehea: Fix some whitespace issues
Harvey Harrison (35):
printk: add %pM format specifier for MAC addresses
printk: add %p6 format specifier for IPv6 addresses
net: replace all current users of NIP6_SEQFMT with %#p6
misc: replace NIP6_FMT with %p6 format specifier
netfilter: replace uses of NIP6_FMT with %p6
net: replace uses of NIP6_FMT with %p6
net, misc: replace uses of NIP6_FMT with %p6
infiniband: use %p6 for printing message ids
infiniband: ipoib replace IPOIB_GID_FMT with %p6
infiniband: remove IPOIB_GID_RAW_ARG, IPOIB_GID_ARG, IPOIB_GID_FMT
uwb: use the %pM formatting specifier in eda.c
net: remove NIP6(), NIP6_FMT, NIP6_SEQFMT and final users
printk: add %I4, %I6, %i4, %i6 format specifiers
net: replace %#p6 format specifier with %pi6
net: replace %p6 with %pI6
printk: remove %p6 format specifier, fix up comments
net: easy removals of HIPQUAD using %pI4 format
net: replace NIPQUAD() in net/ipv4/netfilter/
net: replace NIPQUAD() in net/ipv4/ net/ipv6/
net: replace NIPQUAD() in net/netfilter/
net: replace NIPQUAD() in net/*/
drivers: replace NIPQUAD()
fs: replace NIPQUAD()
misc: replace NIPQUAD()
printk: ipv4 address digits printed in reverse order
ipvs: oldlen, newlen should be be16, not be32
phonet: sparse annotations of protocol, remove forward declaration
tipc: trivial endian annotation in debug statement
isdn: use %pI4, remove get_{u8/u16/u32} and put_{u8/u16/u32} inlines
net: ip_sockglue.c add static, annotate ports' endianness
isdn: isdn_net.c annotate struct ip_ports and trivial sparse fixes
aoe: remove private mac address format function
decnet: remove private wrappers of endian helpers
decnet: compile fix for removal of byteorder wrapper
iwlwifi: remove uses of __constant_{endian} helpers
Helmut Schaa (2):
iwl3945: remove obsolete irq handling
ipw2200: fix scanning while associated
Henning Rogge (1):
nl80211: Add signal strength and bandwith to nl80211station info
Henrique de Moraes Holschuh (7):
rfkill: use killable locks instead of interruptible
rfkill: export global states to rfkill-input
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input
rfkill: honour EPO state when resuming a rfkill controller
rfkill: rate-limit rfkill-input workqueue usage (v3)
rfkill: preserve state across suspend
rfkill: always call get_state() hook on resume
Herbert Xu (11):
net: Add frag_list support to skb_segment
net: Add frag_list support to GSO
net: Add Generic Receive Offload infrastructure
ipv4: Add GRO infrastructure
net: Add skb_gro_receive
tcp: Add GRO support
ethtool: Add GGRO and SGRO ops
e1000e: Add GRO support
tcp: Always set urgent pointer if it's beyond snd_nxt
ipsec: Remove useless ret variable
gro: Fix potential use after free
Herton Ronaldo Krzesinski (6):
rtl8187: adapt for deprecated IEEE80211_CONF_SHORT_SLOT_TIME flag
rtl8187: add short slot handling for 8187B
rtl8187: fix 8187B throughput regression
rtl8187: implement conf_tx callback to configure tx queues
rtl8187: feedback transmitted packets using tx close descriptor for 8187B
rtl8187: Fix crash on unload when using SLUB debug
Holger Eitzenberger (23):
bonding: add and use bond_is_lb()
bonding: use table for mode names
bonding: fix compile error if debug enabled
bonding: use pr_debug instead of own macros
bonding: remove duplicate declarations
bonding: make tbl argument to bond_parse_parm() const
bonding: turn all bond_parm_tbls const
bonding: improve elaborate port_state assignment
bonding: introduce and use port_params structure
bonding: use port_params in __record_pdu()
bonding: use plain memcpy in __record_default()
bonding: init port_params from template
bonding: remove various function declarations
bonding: use port_params in __update_selected()
bonding: use port_params in __update_default_selected()
bonding: use port_params in __update_lacpdu_from_port
802.3ad: make ntt bool
802.3ad: turn ports is_enabled into a bool
802.3ad: turn ports is_individual into a bool
802.3ad: remove typedef around ad_system
802.3ad: initialize ports LACPDU from const initializer
802.3ad: generalize out mac address initializer
802.3ad: use standard ethhdr instead of ad_header
Holger Schurig (1):
wireless: fix two bad print_ssid conversions
Ilpo Järvinen (40):
b43legacy: reindent misleading statement
tcp: collapse more than two on retransmission
tcp: move tcp_simple_retransmit to tcp_input
tcp: more aggressive skipping
tcp: Make SACK code to split only at mss boundaries
tcp: make tcp_sacktag_one able to handle partial skb too
tcp: Try to restore large SKBs while SACK processing
tcp: Make shifting not clear the hints
tcp: add some mibs to track collapsing
tcp: handle shift/merge of cloned skbs too
tcp: tcp_limit_reno_sacked can become static
tcp: skb_shift cannot cache frag ptrs past pskb_expand_head
niu: use net_device_stats nowadays available in net_device
bnx2: use net_device_stats nowadays available in net_device
ne2: silence static never defined warnings
dccp: use roundup instead of opencoding
tcp: force mss equality with the next skb too.
tcp: Fix thinko making the not-shiftable to cover S|R as well
tcp: make mtu probe failure to not break gso'ed skbs unnecessarily
tcp: introduce struct tcp_sacktag_state to reduce arg pressure
tcp: no need to pass prev skb around, reduces arg pressure
tcp: drop tcp_bound_rto, merge content of it tcp_set_rto
tcp: share code through function, not through copy-paste. :-)
tcp: move some parts from tcp_write_xmit
tcp: use tcp_write_xmit also in tcp_push_one
tcp: fix tso_should_defer in 64bit
icsk: join error paths using goto
xfrm6_tunnel: join error paths using goto
ipv6/mcast: join error paths using goto
ip6mr: use goto to common label instead of opencoding
xfrm: join error paths
can: merge error paths
ax25: join the return paths that free skb
bt/rfcomm/tty: join error paths
irda: merge exit paths
nf/dccp: merge errorpaths
rpc/rdma: goto instead of copypaste
hp100: use roundup instead of open coding
ipmr: merge common code
libertas: use roundup instead of opencoding
Ingo Molnar (24):
netfilter: fix warning in net/netfilter/nf_conntrack_proto_tcp.c
netfilter: fix warning in net/netfilter/nf_conntrack_ftp.c
s2io: fix warning in drivers/net/s2io.c
niu: fix warnings in drivers/net/niu.c
niu: fix another warning in drivers/net/niu.c
qla3xxx: fix warning in drivers/net/qla3xxx.c
sunrpc: fix warning in net/sunrpc/xprtrdma/svc_rdma_transport.c
pkt_sched: fix warning in net/sched/sch_hfsc.c
ipv6: fix warning in net/ipv6/ip6_flowlabel.c
dsa: fix warning in net/dsa/mv88e6xxx.c
dsa: fix warning in net/dsa/mv88e6060.c
fix warning in fs/dlm/netlink.c
sis900: fix warning in drivers/net/sis900.c
z85230: fix warning in drivers/net/wan/z85230.c
mlx4: fix error path in drivers/net/mlx4/en_rx.c
cassini: fix warning in drivers/net/cassini.c
dccp: fix warning in net/dccp/options.c
mlx4: fix warning in drivers/net/mlx4/mcg.c
ax25: fix warning in net/ax25/sysctl_net_ax25.c
sunrpc: fix warning in net/sunrpc/xprtrdma/verbs.c
bluetooth: fix warning in net/bluetooth/rfcomm/sock.c
atlx: fix warning in drivers/net/atlx/atl2.c
depca: fix warning in drivers/net/depca.c
3c523: fix warning in drivers/net/3c523.c
Ivan Kuten (1):
mac80211: fix unaligned access in ieee80211_wep_encrypt_data
Ivo van Doorn (26):
rt2x00: Optimize configuration handling
rt2x00: Remove ieee80211_bss_conf from rt2x00_intf
rt2x00: Improve interface_modes initialization
rt2x00: Release rt2x00 2.2.2
rt2x00: Remove debugfs CSR access wrappers
rt2x00: Remove RATE_BASIC flag
rt2x00: Fix LED state handling
rt2x00: Block set_key() during suspend/shutdown
rt2x00: Fix BUG_ON() with antenna handling
rt2x00: Cleanup TX/RX entry handling
rt2x00: Optimize get_duration / get_duration_res
rt2x00: Fix race condition when using inderect registers
rt2x00: Cleanup indirect register access
rt2x00: Move rt73usb register access wrappers into rt2x00usb
rt2x00: Fix TX failure path
rt2x00: Detect USB BULK in/out endpoints
rt2x00: Don't switch off LED on initialization
rt2x00: Optimize IV/EIV handling
rt2x00: Store retry limit values
rt2x00: Remove duplicate code
rt2x00: Implement HW encryption (rt2500usb)
rt2x00: Release rt2x00 2.2.3
rt2x00: Add RXDONE_CRYPTO_IV/ICV flags
rt2x00: Fix check for BSS info changes
rt2x00: Move crypto TX descriptor handling to rt2x00crypto.c
rt2x00: Correctly initialize AID during set_key()
James Chapman (1):
l2tp: fix UDP checksum support
Jarek Poplawski (24):
pkt_sched: sch_generic: Add Qdisc_ops peek() method.
pkt_sched: sch_generic: Add generic qdisc->ops->peek() implementation.
pkt_sched: Add qdisc->ops->peek() implementation.
pkt_sched: Use qdisc->ops->peek() instead of ->dequeue() & ->requeue()
pkt_sched: Add peek emulation for non-work-conserving qdiscs.
sch_netem: Remove classful functionality
sch_netem: Replace ->requeue() method with open code
pkt_sched: sch_generic: Kfree gso_skb in qdisc_reset()
pkt_sched: Fix qdisc len in qdisc_peek_dequeued()
pkt_sched: Remove qdisc->ops->requeue() etc.
pkt_sched: sch_drr: Fix qlen in drr_drop()
net: gen_estimator: Fix gen_kill_estimator() lookups
pkt_sched: sch_api: Remove qdisc_list_lock
pkt_sched: gen_estimator: Optimize gen_estimator_active()
pkt_sched: sch_htb: Remove htb_class aprio field
pkt_sched: sch_htb: Remove htb_sched nwc_hit field
pkt_sched: sch_htb: Clean htb_class prio and quantum fields
pkt_sched: sch_htb: Remove L2T()
pkt_sched: sch_htb: Replace HTB_ACCNT() macro with inlines
pkt_sched: sch_htb: Optimize htb_find_next_upper()
pkt_sched: sch_htb: Optimize WARN_ONs in htb_dequeue_tree() etc.
pkt_sched: Annotate uninitialized var in sfq_enqueue()
net: Fix oops in dev_ifsioc()
pkt_sched: Remove smp_wmb() in qdisc_watchdog()
Jay Sternberg (3):
iwlwifi: define firmware file name once
iwlwifi: expand error lookup and align output
iwlwifi: indicate txpower is off in sysfs
Jay Vosburgh (3):
bonding, net: Move last_rx update into bonding recv logic
bonding: Fix ALB mode to balance traffic on VLANs
bonding: alternate agg selection policies for 802.3ad
Jeff Kirsher (6):
DCB: fix kconfig option
ixgbe: cleanup link up/down messages
e1000: cleanup link up/down messages
ixgb: cleanup link up/down messages
e100: cleanup link up/down messages
igb: fixup AER with proper error handling
Jesper Dangaard Brouer (3):
NIU: Implement discard counters
NIU: Implement discard counters, info/debug statements.
NIU: Implement discard counters, optimize
Jesse Brandeburg (3):
ixgbe: add device support for 82598AT (copper 10GbE) adapters
pktgen: add full reset functionality
ixgbe: fix dma mapping unbalance
Jianjun Kong (12):
af_unix: clean up net/unix/af_unix.c garbage.c sysctl_net_unix.c
net: clean up net/ipv4/ah4.c esp4.c fib_semantics.c inet_connection_sock.c inetpeer.c ip_output.c
net: clean up net/ipv4/ipip.c raw.c tcp.c tcp_minisocks.c tcp_yeah.c xfrm4_policy.c
net: clean up net/ipv4/fib_frontend.c fib_hash.c ip_gre.c
net: clean up net/ipv4/igmp.c
net: clean up net/ipv4/ip_sockglue.c tcp_output.c
net: clean up net/ipv4/ipmr.c
net: clean up net/ipv4/ip_fragment.c tcp_timer.c ip_input.c
net: clean up net/ipv4/pararp.c
net: clean up net/ipv4/devinet.c
net: clean up net/ipv4/tcp_ipv4.c
net: remove two duplicated #include
Jiri Slaby (1):
Ath5k: add AP mode
Jirka Pirko (3):
tokenring/3c359.c: fix allocation null check
tokenring/3c359.c: Fix error message when allocating tx_ring
tokenring/3c359.c: Prevent possible mem leak when open failed
Joe Chou (2):
r6040: fix wrong logic in mdio code
r6040: save and restore MIER correctly in the interrupt routine
Joe Korty (1):
forcdeth: increase max_interrupt_work
Joe Perches (3):
include/net net/ - csum_partial - remove unnecessary casts
drivers/s390/ - csum_partial - remove unnecessary casts
net/ipv6/ip6mr.c: Use kmem_cache_zalloc, remove memset
Johannes Berg (72):
mac80211: convert to %pM away from print_mac
net: convert print_mac to %pM
net: convert more to %pM
mac80211: remove aggregation status write support from debugfs
mac80211: remove writable debugs mesh parameters
mac80211: minor code cleanups
mac80211: remove wiphy_to_hw
mac80211: clean up ieee80211_hw_config errors
mac80211: remove max_antenna_gain config
mac80211: fix short slot handling
802.11: clean up/fix HT support
mac80211: kill hw.conf.antenna_sel_{rx,tx}
mac80211: introduce hw config change flags
mac80211: provide sequence numbers
nl80211: export HT capabilities
iwl3945: fix station stuff in RC algorithm
mac80211: make retry limits part of hw config
mac80211: move bss_conf into vif
mac80211: rewrite HT handling
p54/rtl8187: fix up the seqno patch
mac80211: add might_sleep to hw_config
mac80211/drivers: rewrite the rate control API
p54: implement MRR
make ieee80211 invisible
nl80211: fix monitor flags
mac80211: remove rate_control_clear
mac80211: inform userspace of probe/auth/assoc timeout
wireless: don't publish __regulatory_hint
wireless: remove cfg80211_reg_mutex
wireless: get rid of pointless request list
wireless: fix EU check
mac80211: insert AP sta entry after filling it
wireless: remove write-only 'granted' variable
wireless: make regdom passing semantics simpler
wireless: remove struct regdom hinting
wireless: clean up regulatory ignore_request function
wireless regulatory: move ignore_request
mac80211: fix two kernel-doc warnings
wireless: move mesh config length constant
wireless: fix a few sparse warnings
ath9k: remove useless NULL initialisers
iwl3945: remove dead code
iwlwifi: remove implicit direct scan
iwlwifi: remove unused essid variable
b43/legacy: remove SSID code
adm8211: remove SSID code
mac80211: remove SSID driver code
iwl3945: remove bogus comment
don't use net/ieee80211.h
wireless: implement basic rate helper function
b43: implement short slot and basic rate handling
libertas_tf: fix skb tail pointer
b43legacy: implement short slot and basic rate handling
b43: remove rate index warning
wireless: clean up sysfs code using %pM
ath5k: name pci driver "ath5k" too
mac80211: only transition STAs ps->wake on data frames
cfg80211: handle SIOCGIWNAME
cfg80211: handle SIOCGIWMODE/SIOCSIWMODE
wireless: clean up radiotap a bit
cfg80211: fix wiphy remove if no regulatory request
cfg80211: "fix" 11d oops
p54: fix lm87 checksum endianness
iwlwifi: disable AP mode
mac80211: improve sta_notify documentation
cfg80211: fix nl80211 frequency handling
mac80211: only create default STA interface if supported
ath9k: remove fragmentation workaround again
mac80211: remove fragmentation offload functionality
mac80211/cfg80211: check endianness in sparse runs
rfkill: strip pointless notifier chain
forcedeth: don't poll NV event 36
John Daiker (2):
ath5k: reduce checkpatch.pl errors
rt2x00: reduce checkpatch.pl errors
John W. Linville (21):
p54: integrate parts of lmac_longbow.h and other parts of stlc45xx
wireless: consolidate on a single escape_essid implementation
wireless: remove NETWORK_EMPTY_ESSID flag
wireless: escape_ssid should handle non-printables
wireless: use individual buffers for printing ssid values
wireless: avoid some net/ieee80211.h vs. linux/ieee80211.h conflicts
p54: eliminate warning for uninitialized variable 'tim_len'
ath9k: correct warning about unintialized variable 'tid'
netdevice zd1201: Convert directly reference of netdev->priv to netdev_priv()
ipw2100, ipw2200: select LIB80211
lib80211: absorb crypto bits from net/ieee80211
lib80211: consolidate crypt init routines
ipw2x00: relocate ipw2100/ipw2200 to common directory
net/ieee80211 -> drivers/net/ipw2x00/libipw_* rename
mac80211: add explicit padding in struct ieee80211_tx_info
rtl8180: adapt for deprecated IEEE80211_CONF_SHORT_SLOT_TIME flag
MAINTAINERS: claim maintenance over rtl818x drivers
mac80211_hwsim: fix-up some print_mac merge damage
hostap: select required crypto bits in Kconfig
mac80211: deauth when interface is marked down
ieee80211_security: correct warning about width of auth_mode
Jouni Malinen (25):
mac80211_hwsim: Debug info for BSS config changes
nl80211: Add basic rate configuration for AP mode
mac80211_hwsim: Debug info for TX queue parameters
nl80211: Add TX queue parameter configuration
mac80211_hwsim: Make sure beacon_timer gets deleted
mac80211: Allow AP mode to be enabled
mac80211_hwsim: Add support for client PS mode
mac80211_hwsim: Update documentation (AP mode enabled)
nl80211: Report max TX power in NL80211_BAND_ATTR_FREQS
nl80211: Change max TX power to be in mBm instead of dBm
nl80211: Add frequency configuration (including HT40)
ath9k: Free Beacon skbs in AP mode
ath9k: Disable staggered Beacon frame scheduling
mac80211: Disable requests for new scans in AP mode
ath9k: Do not remove header padding on RX from short frames
mac80211: Add HT rates into RX status reporting
ath9k: Report HT rates in RX status
mac80211: Send Layer 2 Update frame on reassociation
mac80211: Remove radiotap rate-present flag for HT
ath9k: Fix TX status reporting for retries and MCS index
ath9k: Remove MAC header pad before reporting TX status
ath9k: Fix a NULL pointer dereference in ath_rate_get
ath9k: Key cache allocation for AP mode
ath9k: Fix key cache slot selection for splitmic
ath9k: Fixed RX decryption status reporting
Julia Lawall (10):
drivers/net/wireless/ath9k/rc.c: use ARRAY_SIZE
Bluetooth: Change simple_strtol to simple_strtoul
drivers/isdn/mISDN: use ARRAY_SIZE
drivers/net/hamradio: Move a dereference below a NULL test
drivers/net/wan: Remove redundant test
drivers/net/au1000_eth.c: Remove redundant test
drivers/net/ehea: Remove redundant test
drivers/net: Remove redundant test
drivers/net/wan: Remove redundant test
net/appletalk: Remove redundant test
Julius Volz (3):
IPVS: Add IPv6 support to SH and DH schedulers
IPVS: Add IPv6 support to LBLC/LBLCR schedulers
IPVS: Remove supports_ipv6 scheduler flag
Kalle Valo (4):
mac80211: document ieee80211_tx_info.pad
mac80211: enable IEEE80211_CONF_PS only when associated
mac80211: track master queue status
mac80211: implement dynamic power save
Karen Xie (1):
cxgb3: manage private iSCSI IP address
Karsten Keil (1):
misdn: Fix lockdep warning
Kay Sievers (2):
net: struct device - replace bus_id with dev_name(), dev_set_name()
ssb: struct device - replace bus_id with dev_name(), dev_set_name()
Kolekar, Abhijeet (3):
iwl3945 : Fix Sparse Warnings
iwl3945 : Simplify iwl3945_send_beacon_cmd
iwl3945 : Simplify iwl3945_pci_probe
Komuro (1):
fmvj18x_cs: write interrupt ack bit for lan and modem to work simultaneously.
Krzysztof Halasa (1):
net: PHYLIB mdio fixes #2
Krzysztof HaÅasa (28):
WAN: split hd6457x.c into hd64570.c and hd64572.c
WAN: remove SCA II support from SCA drivers
WAN: remove SCA support from SCA-II drivers
WAN: convert HD64572-based drivers to NAPI.
WAN: TX-done handler now uses the ownership bit in HD64572 drivers.
WAN: HD64572 already handles TX underruns with DMAC.
WAN: rework HD64572 interrupts a bit.
WAN: Simplify HD64572 status handling.
WAN: don't print HD64572 driver versions anymore.
WAN: Simplify HD64572 drivers.
WAN: HD64572 drivers don't use next_desc() anymore.
WAN: Correct comments in hd6457[02].c
WAN: Simplify sca_init_port() in HD64572 driver.
WAN: new synchronous PPP implementation for generic HDLC.
WAN: syncppp.c is no longer used by any kernel code. Remove it.
WAN pc300too.c: Fix PC300-X.21 detection
IXP4xx: check for queue being empty in qmgr_release_queue().
IXP4xx: clear IRQ stat in qmgr_disable_irq().
IXP4xx: Silence section mismatch warning in Ethernet driver.
IXP4xx: Make the Ethernet driver use built-in netdev stats.
IXP4xx: Add PHYLIB support to Ethernet driver.
IXP4xx: Add PHYLIB MII ioctl to the Ethernet driver.
IXP4xx: Add ethtool support to Ethernet driver.
WAN: Add IXP4xx HSS HDLC driver.
Update MAINTAINERS entries for IXP4xx and WAN network drivers.
IXP4xx: move common debugging from network drivers to QMGR module.
HDLC_PPP: Fix Configure-Ack to return original options as required by the standard.
Convert ixp4xx_eth driver to use net_device_ops.
Larry Finger (20):
p54: Move rx_mtu to struct bootrec_desc
hostap: Fix sparse warnings
rtl8187: Remove large delays
rtl8187: Remove OFDM delays
rtl8187: Remove CCK delays
rtl8187: Remove msleep calls after calls to rtl8225_write
rtl8187: Remove primitive write delays
rtl8187: Reduce channel switch delay
rtl8187: Change TX power settings
Move all rtl818x files to a common directory.
Update of MAINTAINERS for RTL8187
rtl8187: Update file authorship in comments
rtl8187: Remove module warning and dependence on CONFIG_EXPERIMENTAL
mac80211: Fix pid rate-setting algorithm to allow rate changes
rtl8187: Fix transmission count sent to mac80211
rtl8187: Improve wireless statistics for RTL8187
rtl8187: Use usb anchor facilities to manage urbs
b43legacy: Fix sparse warnings
rtl8187: Fix error returns
mac80211: Print unknown packet type in tasklet_handler
Lennert Buytenhek (6):
mv643xx_eth: checkpatch fixes
mv643xx_eth: introduce per-port register area pointer
mv643xx_eth: inline txq_alloc_desc_index()
mv643xx_eth: implement ->set_rx_mode()
mv643xx_eth: move receive error handling out of line
mv643xx_eth: calculate descriptor pointer only once in rxq_refill()
Luis R. Rodriguez (32):
ath5k/ath9k: correct signal quality
ath9k: correct signal quality report
ath5k: correct ath5k signal quality
mac80211: make use of regulatory tx power settings on change of tx power
ath9k: remove pointless sc_txintrperiod and spin_lock_bh on tx prepare
ath9k: enable RX interrupt mitigation
ath9k: Allow user to change tx power when asked
ath9k: use ETH_P_PAE
cfg80211: a reg rule is invalid if freq diff is 0
cfg80211: Add regulatory domain intersection capability
cfg80211: make use of reg macros on REG_RULE
cfg80211: Add kdoc for struct regulatory_request
ath5k: allow APs to receive beacons
ath9k: enable RXing of beacons on STA/IBSS
cfg80211: mark negative frequencies as invalid
cfg80211: remove switch from __regulatory_hint()
cfg80211: remove switch from __set_regdom()
cfg80211: separate intersection section in __set_regdom()
cfg80211: expect different rd in cfg80211 when intersecting
cfg80211: call_crda() won't tell us if CRDA was present
cfg80211: mark regdomains with > NL80211_MAX_SUPP_REG_RULES invalid
cfg80211/mac80211: Add 802.11d support
cfg80211: add support for custom firmware regulatory solutions
iwlwifi: enable custom fw regulatory solution
ath9k: Clarify we only want 32-bit DMA
ath9k: make DMA memory consistent
mac80211: don't assume driver has been attached on registration
mac80211: make Minstrel the default rate control algorithm
ath9k: Handle -ENOMEM on RX gracefully
nl80211: relicense nl80211.h under the ISC
ath9k: Check for pci_map_single() errors
ath9k: Use GFP_ATOMIC when allocating TX private area
Luotao Fu (1):
smc91x: remove isa stuff from smc91x driver
Marcel Holtmann (10):
Bluetooth: Add fine grained mem_flags usage to btusb driver
Bluetooth: Handle bulk URBs in btusb driver from notify callback
Bluetooth: Add suspend/resume support to btusb driver
Bluetooth: Fix warnings for bt_key_strings and bt_slock_key_strings
Bluetooth: Remove deprecated hci_usb driver
Bluetooth: Send HCI Reset command by default on device initialization
Bluetooth: Allow SCO audio with Asus WL-BTD202 dongle
Bluetooth: Enable per-module dynamic debug messages
Bluetooth: Fix format arguments warning
Bluetooth: Fix RFCOMM release oops when device is still in use
Mark McLoughlin (4):
virtio_net: Recycle some more rx buffer pages
virtio_net: hook up the set-tso ethtool op
virtio_net: VIRTIO_NET_F_MSG_RXBUF (imprive rcv buffer allocation)
virtio_net: large tx MTU support
Martin Willi (3):
xfrm: Notify changes in UDP encapsulation via netlink
xfrm: Accept XFRM_STATE_AF_UNSPEC SAs on IPv4/IPv6 only hosts
xfrm: Accept ESP packets regardless of UDP encapsulation mode
Matt Carlson (30):
tg3: Add 5761S support
tg3: Use pci_ioremap_bar()
tg3: Preserve DASH connectivity when WOL enabled
tg3: Preserve LAA when device control is released
tg3: Reclaim TG3_FLG3_5761_5784_AX_FIXES flag
tg3: Do not enable APE on bcm5700
tg3: Move phylib report to end of tg3_init_one
tg3: Refine power management and WOL code
tg3: Allow WOL for phylib controlled Broadcom phys
tg3: Refine phylib support
tg3: 5785 enhancements
broadcom: Add flow control support
broadcom: Refine expansion register access routine
broadcom: Add support for BCM50610
tg3: Update version to 3.95
tg3: Use NET_IP_ALIGN
tg3: Qualify use of tp->pcix_cap
tg3: Prevent corruption at 10 / 100Mbps w CLKREQ
tg3: Enable GPHY APD on select devices
tg3: Extract FW ver from alt NVRAM formats
tg3: Embrace pci_ioremap_bar()
tg3: Allow GPHY powerdown on 5761
tg3: Add 57780 support
broadcom: Add 57780 support
tg3: Update version to 3.96
tg3: WOL fixes
tg3: Cleanup IPV6 LSO
tg3: Remove unused cfgspc device members
tg3: tg3.h cleanups
tg3: Update version to 3.97
Matt Mackall (1):
tcp: Stop scaring users with "treason uncloaked!"
Michael Buesch (3):
b43: Fix some MAC locking
b43: Suspend MAC while killing the radio
b43: Add key memory dumping
Michael Chan (7):
bnx2: Add PCI ID for 5716S.
bnx2: Restrict WoL support.
bnx2: Set rx buffer water marks based on MTU.
bnx2: Reorganize timeout constants.
bnx2: Update version to 1.8.2.
bnx2: Rename MSI-X vectors.
bnx2: Update version to 1.9.0.
Mike Frysinger (2):
smc91x: add __init markings to smc_drv_probe()
netdev/smc91x: unify Blackfin code a bit and use proper read/write functions
Mohamed Abbas (6):
iwlwifi: clear scanning bits upon failure
iwlwifi: do not call statistics from rfkill
iwlagn: fix resume for ADHOC network
iwl3945: fix resume for ADHOC network
iwlwifi: fix resume while txpower off
iwlagn: fix agn rate scaling
Nathan Lynch (1):
ehea: use get_zeroed_page for alignment-sensitive allocation
Neil Horman (2):
net: implement emergency route cache rebulds when gc_elasticity is exceeded
net: Remove unused netdev arg from some NAPI interfaces.
Neil Turton (1):
sfc: Add option to use a separate channel for TX completions
Nick Andrew (2):
wireless: Fix incorrect use of loose in wext.c
net: Fix incorrect use of loose in spider_net.c
Nick Kossifidis (3):
ath5k: Update interrupt masking code
ath5k: Update PCU code
ath5k: Fix IMR init
Nick Pelly (1):
Bluetooth: Respect HCI_UART_DEBUG config in hci_ll.c
Nicolas Dichtel (1):
xfrm6: handling fragment
Oliver Hartkopp (2):
vcan: convert to net_device_ops
vcan: whitespace fixes
Oliver Neukum (2):
net: prepare usb net drivers for addition of status as a parameter
net: startup race in hso driver
PJ Waskiewicz (1):
ixgbe: Fix usage of netif_*_all_queues() with netif_carrier_{off|on}()
Pablo Neira Ayuso (7):
netfilter: ctnetlink: use nf_conntrack_get instead of atomic_inc
netfilter: ctnetlink: use EOPNOTSUPP instead of EINVAL if the conntrack has no helper
netfilter: ctnetlink: get rid of module refcounting in ctnetlink
netfilter: nf_conntrack: connection tracking helper name persistent aliases
netfilter: ctnetlink: helper modules load-on-demand support
netfilter: ctnetlink: deliver events for conntracks changed from userspace
filter: add SKF_AD_NLATTR_NEST to look for nested attributes
Patrick McHardy (12):
netlink: constify struct nlattr * arg to parsing functions
pkt_sched: Add ->peek() methods for fifo, prio and SFQ qdiscs.
netfilter: nfnetlink_log: fix warning and prototype mismatch
netfilter: nf_conntrack: fix warning and prototype mismatch
netlink: avoid memset of 0 bytes sparse warning
pkt_sched: add DRR scheduler
pkt_sched: remove unnecessary xchg() in packet schedulers
pkt_sched: remove unnecessary xchg() in packet classifiers
netfilter: nf_conntrack_proto_sctp: avoid bogus warning
netfilter: nf_conntrack_ftp: change "partial ..." message to pr_debug()
pkt_sched: sch_drr: fix drr_dequeue loop()
netlink: allow empty nested attributes
Paulius Zaleckas (2):
phylib: rename mdio-ofgpio to mdio-gpio
phylib: make mdio-gpio work without OF (v4)
Pavel Roskin (3):
p54: don't report known but unhandled EEPROM codes as unknown
orinoco: fix last beacon reporting on 64-bit systems
airport: remove useless return in a function returning void
Peter P Waskiewicz Jr (4):
ixgbe: Implement PCIe AER support
net: Init NAPI dev_list on napi_del
ixgbe: Fix NAPI enable/disable path when using DCB
ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
Petr Tesarik (1):
tcp: remove an unnecessary field in struct tcp_skb_cb
Qinghuang Feng (1):
net: remove redundant argument comments
Rafael J. Wysocki (2):
skge: adapt skge to use reworked PCI PM
e100: adapt to the reworked PCI PM
Rami Rosen (13):
mac80211: remove unused declaration of struct sta_attribute.
mac80211: use HWSIM_STA_MAGIC in hwsim_check_sta_magic() and hwsim_set_sta_magic().
mac80211: check return value of dev_alloc_skb() in ieee80211_sta_join_ibss().
mac80211: remove unnecessary include.
wireless: missing include in lib80211.h
mac80211: tx module cleanup.
iwlwifi: cleanup (remove pm_state)
iwlwifi: fix build error (iwl-rx.c).
mac80211: misc cleanups
iwlwifi: fix build warning (iwl-rx.c)
iwlwifi: remove a parameter (dest) from *_fill_beacon_frame() methods.
mac80211: fix a typo in ieee80211_send_assoc() method.
iwlwifi: iwl-tx.c cleanup (remove unused parameter and unused local variable).
Randy Dunlap (2):
mac80211: remove more excess kernel-doc
sctp: fix missing label when PROC_FS=n
Reinette Chatre (2):
iwlwifi: rely on API version read from firmware
mac80211: remove WARN_ON() from ieee80211_hw_config
Robert Olsson (2):
niu: Naming interrupt vectors.
ixgbe: Naming interrupt vectors
Roel Kluin (2):
net: Make static
qlge: ql_adapter_down() typo
Roland Dreier (1):
cxgb3: Fix sparse warning and micro-optimize is_pure_response()
Rémi Denis-Courmont (8):
Phonet: use net_device built-in stats for GPRS
Phonet: basic net namespace support
Phonet: improve GPRS variable names
Phonet: allocate a non-Ethernet ARP type
Phonet: allocate separate ARP type for GPRS over a Phonet pipe
Phonet: use atomic for packet TX window
Phonet: get rid of deferred work on the transmission path
Phonet: USB CDC Phonet function for gadget framework
Sakari Ailus (1):
tlan: Remove broken support for big buffers
Samuel Ortiz (1):
iwl3945: Select correct sta ID from find_station()
Sangtae Ha (1):
[TCP] CUBIC v2.3
Scott Feldman (5):
enic: enable ethtool LRO support
enic: driver/firmware API updates
enic: mask off some reserved bits in CQ descriptor for future use
enic: move wmb closer to where needed: before writing posted_index to hw
enic: misc cleanup items:
Senthil Balasubramanian (12):
ath9k: INI update for atheros chipets.
ath9k: incorrect noise floor threshold values.
ath9k: Build RFKILL feature even when RFKILL subsystem is a MODULE
ath9k: IRQ should be disabled before calling free_irq()
ath9k: Race condition in accessing TX and RX buffers.
wireless: Incorrect LEAP authentication algorithm identifier.
ath9k: Adding AR9285 chipset register information.
ath9k: Adding initvalues for Atheros AR9285 chipset.
ath9k: Adding support for Atheros AR9285 chipset.
ath9k: Incorrect band enum causes invalid antenna configuration.
ath9k: avoid rx frames with corrupted descriptor.
ath9k: BH shouldn't be enabled when hardirqs are disabled.
Simon Arlott (1):
netfilter: nf_nat: remove warn_if_extra_mangle
Stephen Hemminger (92):
vlan: propogate ethtool speed values
macvlan: add support for ethtool get settings
atlx: use embedded net_device_stats
atlx: timer cleanup
net: increase receive packet quantum
netem: eliminate unneeded return values
netdev: network device operations infrastructure
netdev: introduce dev_get_stats()
netdev: expose ethernet address primitives
netdev: convert loopback to net_device_ops
ifb: convert to net_device_ops
bridge: convert to net_device_ops
veth: convert to net_device_ops
macvlan: convert to net_device_ops
ip: convert to net_device_ops for ioctl
vlan: convert to net_device_ops
bonding: convert to net_device_ops
e1000e: convert to net_device_ops
sky2: convert to net_device_ops
skge: convert to net_device_ops
8139: convert to net_device_ops
tun: convert to net_device_ops
atl1e: convert to net_device_ops
atlx: convert to net_device_ops
cxgb3: convert to net_device_ops
cxgb2: convert to net_device_ops
e1000: convert to net_device_ops
via-velocity: convert to net_device_ops
igb: convert to net_device_ops
e100: convert to net_device_ops
ppp: convert to net_device_ops
enic: convert to net_device_ops
ixgb: convert to net_device_ops
tg3: convert to net_device_ops
forcedeth: convert to net_device_ops
niu: convert to net_device_ops
acenic: convert to net_device_ops
netdev: add more functions to netdevice ops
dummy: convert to net_device_ops
ipmr: convert ipmr virtual interface to net_device_ops
fddi: convert to new network device ops
defxx: convert driver to net_device_ops
hippi: convert driver to net_device_ops
ipip: convert to net_device_ops
ipv6: convert tunnels to net_device_ops
ipgre: convert to netdevice_ops
jme: convert driver to net_device_ops
s2io: convert to net_device_ops
qlge: convert to net_device_ops
qlge: fix sparse warnings
via-rhine: convert to net_device_ops
myri10ge: convert to net_device_ops
mlx4: convert to net_device_ops
bnx2: convert to net_device_ops
dl2k: convert to net_device_ops
netxen: convert to net_device_ops
sfc: convert to net_device_ops
tehuti: convert to net_device_ops
sis900: convert to net_device_ops
r6040: convert to net_device_ops
yellowfin: convert to net_device_ops
ns83820: convert to net_device_ops
bnx2x: convert to net_device_ops
hamachi: convert to net_device_ops
qla3xxx: convert to net_device_ops
sc92031: convert to net_device_ops
eql: convert to net_device_ops
ne2k: convert to net_device_ops
8139too: use err.h macros
netdev: add HAVE_NET_DEVICE_OPS
8390: add common net_device ops
wd: use net_device_ops
hp-plus: convert to net_device_ops
smc: convert to net_device_ops
ne3210: convert to net_device_ops
es3210: convert to net_device_ops
e2100: convert to net_device_ops
lne390: convert to net_device_ops
hp: convert to net_device_ops
ne2: convert to net_device_ops
apne: convert to net_device_ops
stnic: convert to net_device_ops
3c503: convert to net_device_ops
ne2000: convert to net_device_ops
tc: propogate errors from tcf_hash_create
tc: check for errors in gen_rate_estimator creation
tc: policing requires a rate estimator
etherh: build fix for net-next
mac8390: update to net_device_ops
zorro8390: convert to net_device_ops
hydra: convert to net_device_ops
ne-h8300: convert to net_device_ops
Steve Glendinning (15):
SMSC LAN911x and LAN921x vendor driver
smsc95xx: add tx checksum offload support
smsc911x: add dynamic bus configuration
smsc9420: SMSC LAN9420 10/100 PCI ethernet adapter
smsc911x: make smsc911x_poll_controller static
smsc9420: add netpoll support
smsc9420: add ethtool eeprom support
smsc9420: add ethtool register dump support
net: Move flow control definitions to mii.h
net: Refactor full duplex flow control resolution
smsc911x: fix BUG if module is removed while interface is up
smsc911x: convert driver to use net_device_ops
smsc911x: make smsc911x_ethtool_ops constant
smsc911x: don't clobber driver_data
smsc911x: fix platform resource call during module unload
Steve Hodgson (2):
sfc: Make reset_workqueue driver-global rather than per-NIC
sfc: Treat probe as unsuccessful if it scheduled a reset
Sujith (57):
mac80211: Change WARN_ON to WARN_ON_ONCE
ath9k: Check if the STA supports HT when initializing rate control
mac80211: Re-enable aggregation
ath9k: Node cleanup
ath9k: Simplify node attach/detach routines
ath9k: Revamp transmit control block
ath9k: Remove SM Power Save as it is not supported now
ath9k: Ensure ath_node is not NULL when updating tx chainmask
ath9k: Use bitfields to store tid's state in a single variable
ath9k: Revamp VAP management
ath9k: Refactor hw.c
ath9k: Remove unused function ath_get_currentCountry()
ath9k: Streamline attach/detach
ath9k: Remove unnecessary TSF reset
ath9k: Enable interrupts at the proper place
ath9k: Remove ath_tx_aggr_resp()
ath9k: Clear HT info on starting the driver
ath9k: Remove internal RX A-MPDU processing
mac80211: Add a new event in ieee80211_ampdu_mlme_action
ath9k: Fix compilation failure when RFKILL is enabled
mac80211: Use the HT capabilities from the IE instead of the station's caps.
ath9k: Merge struct ath_tx_ratectrl with ath_rate_node
ath9k: Simplify RC alloc/free functions
ath9k: Remove ath_setup_rates
ath9k: Remove ath_rate_newassoc()
ath9k: Remove half/quarter rate tables
ath9k: Nuke fixed rate handling in driver
ath9k: Revamp RX handling
ath9k: We don't support non-HT devices, so remove superfluous code.
ath9k: Remove rate control reference in VAP
ath9k: Remove ath_rate_softc
ath9k: Use rate_driver_data
ath9k: Remove ath9k_rate_table
ath9k: General code scrub
ath9k: Use helpers
ath9k: Move TX completion routine to xmit.c
ath9k: Fix bug in deciphering channel flags
ath9k: Update TX trigger level on a FIFO underrun.
ath9k: Use straightforward PCI routines to setup the TX buffer.
ath9k: Code scrub
ath9k: Use proper TX channel width for setting channels
ath9k: Handle channel initialization for AP mode
ath9k: Use cleaner debug masks
ath9k: Add ATH9K_DEBUG configuration option
ath9k: Remove includes that are not needed
ath9k: Add initial layout for an ath9k specific debugfs mechanism
ath9k: Add a debugfs file for dumping DMA status
ath9k: Choose correct ANI calibration period
ath9k: Fix bug in rate table management
ath9k: Maintain rate table choice after association
ath9k: Add a debugfs file to show interrupt statistics
ath9k: Remove remaining occurrences of CONFIG_SLOW_ANT_DIV
ath9k: Merge structures ath_atx, ath_node_aggr with ath_node
ath9k: Refactor struct ath_softc
mac80211: Fix HT channel selection
ath9k: Do not use association state to update rate table
ath9k: Protect config() callback with a mutex
Thomas Graf (1):
pkt_sched: Control group classifier
Tilman Schmidt (4):
gigaset: remove unnecessary poll method
gigaset: get rid of info() and warn() macros
gigaset: use pr_err() and pr_info()
gigaset: ifdef cleanup
Tim Gardner (1):
ipw2x00: change default policy for auto-associate
Tomas Winkler (34):
iwlwifi: make initial calibration set configurable
iwlwifi: take a valid antenna upon rate scale init
iwlwifi: refactor rxon time command
iwlwifi: remove host commands structures from iwl_cmd
iwlwifi: add iwl_cmd_queue_free for readability
iwlwifi: unify tx antenna toggling
iwlwifi: fix TX cmd dma unmapping
iwlwifi: tx command must run on same tfd as packet
iwlwifi: protect headers from double inclusion
iwlwifi: refactor TX response flow
iwlwifi: don't update TFD free counter for invalid station
iwlwifi: parametrize eeprom versions
iwlwifi: calibration command namespace renaming
iwlwifi: refactor tx byte count table usage
iwlwifi: run through spell checker
mac80211: fix basic rates setting from association response
iwlwifi: revamp tx scheduler byte count tables handling
iwlwifi: move spectrum measurement code to iwl-spectrum.c file
mac80211: rc80211_pid eliminate sparse warnings
iwlwifi: consolidate station management code
iwlwifi: rs: remove fc variable and other cleanups
iwlwifi: iwl-fh.h cleanup
iwlwifi: enable base band calibration in 5000 HW
Bluetooth: Fix TX error path in btsdio driver
mac80211: disassociate prior to unlinking AP/station
iwlwifi: properly initialize calibration command header
iwlwifi: 5150 add support for 5150
iwlwifi: 5150 enable DC calibration
iwlwifi: 5150 compute ct kill threshold
iwlwifi: 5150 parametrize eeprom versions
iwlwifi: remove unused clip_groups priv member
iwlwifi: remove includes of iwl-helpers.h where not needed
iwlwifi: remove 4965 from common uCode API structures
iwlwifi: add contact email to MODULE_AUTHOR
Vasanthakumar Thiagarajan (5):
ath9k: Configure AR_PHY_SWITCH_COM with apropriate antenna control
ath9k: Fix panic while unregistering rfkill
ath9k: Dont update rate control for every AMPDU
ath9k: Synchronize DMA transfer with CPU at right place
ath9k: Move rate control alg register/unregister to appropriate place
Vegard Nossum (2):
Bluetooth: Fix leak of uninitialized data to userspace
netlink: fix (theoretical) overrun in message iteration
Vivek Natarajan (1):
mac80211: Look out for some other AP when disassoc is received.
Wang Chen (37):
airo: Kill directly reference of netdev->priv
netdevice libertas: Fix directly reference of netdev->priv
netdevice: safe convert to netdev_priv() #part-1
netdevice: safe convert to netdev_priv() #part-2
netdevice: safe convert to netdev_priv() #part-3
netdevice: safe convert to netdev_priv() #part-4
netdevice chelsio: Convert directly reference of netdev->priv
netdevice: 82596: Convert netdev->priv to netdev_priv
netdevice hamradio: Convert directly reference of netdev->priv
netdevice lance: Convert directly reference of netdev->priv
netdevice ppp: Convert directly reference of netdev->priv
netdevice ni65: Convert directly reference of netdev->priv
netdevice wanrouter: Convert directly reference of netdev->priv
ixgbe: convert directly reference of netdev->priv
netdevice hdlc: Convert directly reference of netdev->priv
netdevice pc300: Convert directly reference of netdev->priv
netdevice pc300: Add the reason about PC300 BROKEN in Kconfig
netdevice sbni: Convert directly reference of netdev->priv
infiniband: Kill directly reference of netdev->priv
hysdn: Kill directly reference of netdev->priv
isdn: Kill directly reference of netdev->priv
dvb: Kill directly reference of netdev->priv
mptlan: Kill directly reference of netdev->priv
bond: Kill directly reference of netdev->priv
ixgbe: function comment typo
e1000: e1000_adapter->polling_netdev is useless
if_usb: Kill directly reference of netdev->priv
simeth: Kill directly reference of netdev->priv
xtensa: Kill directly reference of netdev->priv
um: Kill directly reference of netdev->priv
sgi-xp: Kill directly reference of netdev->priv
s390_net: Kill directly reference of netdev->priv
staging-p80211: Kill directly reference of netdev->priv
staging-slicoss: Kill directly reference of netdev->priv
staging-winbond: Kill directly reference of netdev->priv
netdevice: Kill netdev->priv
netdevice zd1201: Use after free
Wei Yongjun (6):
xfrm: Cleanup for unlink SPD entry
sctp: Bring SCTP_MAXSEG socket option into ietf API extension compliance
sctp: Fix a typo in socket.c
sctp: Implement socket option SCTP_GET_ASSOC_NUMBER
sctp: Avoid memory overflow while FWD-TSN chunk is received with bad stream ID
sctp: Add validity check for SCTP_PARTIAL_DELIVERY_POINT socket option
Winkler, Tomas (21):
iwlwifi: reorganize flow handler bitology
iwlwifi: trivial removal of some 4965 remaining from iwl-agn-rs.h
iwlwifi: iwl-agn-rs: initialize rs with valid antenna
iwlwifi: trivial fix in includes
iwlwifi: don't fail power set when calibration is not done yet
iwlwifi: move rx queue read pointer into rxq
iwlwifi: move iwl_print_hex_dump to iwl-debug.h
iwlwifi: get some more information about command failure
iwlwifi: move iwl_clear_stations_table to iwl-sta.c
iwlwifi: 4965 define firmware file name once
iwlwifi: TX setup fix confusion between TX queue and TX DMA channel
iwlwifi: TX update chicken bits
iwlwifi: 5150 enable LO, TXIQ and BB calibrations
iwlwifi: move host command check function into separate file
iwlwifi: move disable/enable interrupts to iwl-core.c
iwlwifi: move channels sysfs to debugfs
iwlwifi: change email contact information
iwlifi: remove twice defined SINGLE_FRAME RX FH MASK
iwlwifi: 3945 remove qos module parameter
iwlwifi: remove qos module parameter
iwlwifi: cleanup iwl-dev.h
Wu Fengguang (2):
generic swap(): ath9k: rename swap() to swap_array()
iwlwifi: remove useless goto
Wu, Fengguang (4):
iwlwifi: add line feed to printk
iwlwifi: update comments on the debug interface
iwlwifi: use type uint for module param debug
iwlwifi: use meaningful vars in _iwl_poll_bit()
Yang Hongyang (3):
ipv6: Add IPV6_PKTINFO sticky option support to setsockopt()
ipv6: fix the return interface index when get it while no message is received
ipv6: fix the outgoing interface selection order in udpv6_sendmsg()
Yevgeny Petrilin (5):
mlx4_en: Memory leak on completion queue free
mlx4_en: Removed TX locking when polling TX cq
mlx4_en: Removed redundant cq->armed flag
mlx4_en: Removed Interrupt moderation module parameters
mlx4_en: Remove pauses module parameters.
Zhaolei (2):
Fix debugfs_create_bool's error checking method for wireless/iwlwifi/
Fix debugfs_create_*'s error checking method for wireless/rt2x00/
Zhu Yi (4):
mac80211: print reason code for deauth/dissoc frames
iwlwifi: fix printk size format error
iwlwifi: fix DMA channel number in iwl_txq_ctx_stop
iwlwifi: use GFP_KERNEL to allocate Rx SKB memory
Zhu, Yi (9):
iwlwifi: fix priv->iw_mode setting when multiple vif are configured
iwlwifi: use Rx single frame mode (one Rx frame per RB)
iwlwifi: configure_filter rewrite
iwlwifi: some fh document fix and cleanup
iwlwifi: fix time interval misuse in iwl_poll_{direct_}bit
iwlwifi: fix "MAC in deep sleep" error
iwlwifi: iwl_poll_{direct_}bit cleanup
iwlwifi: use rmb/wmb to protect indirect mmio operation
iwlwifi: use iwl_poll_direct_bit in EEPROM reading
akeemting (1):
jme: GHC register control fix for new hardware
colin@cozybit.com (1):
Add nl80211 commands to get and set o11s mesh networking parameters
herton (1):
rtl8187: fix retry count passed in rtl8187_tx
Documentation/DocBook/Makefile | 2 +-
Documentation/DocBook/networking.tmpl | 3 -
Documentation/DocBook/wanbook.tmpl | 99 -
Documentation/RCU/rculist_nulls.txt | 167 +
Documentation/feature-removal-schedule.txt | 7 -
Documentation/networking/README.ipw2200 | 2 +-
Documentation/networking/bonding.txt | 68 +-
Documentation/networking/dccp.txt | 32 +-
Documentation/networking/driver.txt | 2 +-
Documentation/networking/generic-hdlc.txt | 8 +-
Documentation/networking/ip-sysctl.txt | 6 +
Documentation/networking/mac80211_hwsim/README | 9 +-
Documentation/networking/netdevices.txt | 2 +-
Documentation/networking/regulatory.txt | 22 +-
Documentation/powerpc/dts-bindings/fsl/tsec.txt | 12 +-
Documentation/rfkill.txt | 20 +-
MAINTAINERS | 48 +-
arch/arm/mach-ixp4xx/fsg-setup.c | 9 +-
arch/arm/mach-ixp4xx/include/mach/qmgr.h | 35 +-
arch/arm/mach-ixp4xx/ixp4xx_qmgr.c | 44 +-
arch/arm/mach-ixp4xx/nas100d-setup.c | 5 +-
arch/arm/mach-ixp4xx/nslu2-setup.c | 5 +-
arch/ia64/hp/sim/simeth.c | 25 +-
arch/powerpc/boot/dts/asp834x-redboot.dts | 20 +
arch/powerpc/boot/dts/ksi8560.dts | 20 +
arch/powerpc/boot/dts/mpc8313erdb.dts | 20 +
arch/powerpc/boot/dts/mpc8315erdb.dts | 19 +
arch/powerpc/boot/dts/mpc8349emitx.dts | 18 +
arch/powerpc/boot/dts/mpc8349emitxgp.dts | 5 +
arch/powerpc/boot/dts/mpc834x_mds.dts | 19 +
arch/powerpc/boot/dts/mpc8377_mds.dts | 19 +
arch/powerpc/boot/dts/mpc8377_rdb.dts | 19 +
arch/powerpc/boot/dts/mpc8378_mds.dts | 19 +
arch/powerpc/boot/dts/mpc8378_rdb.dts | 17 +
arch/powerpc/boot/dts/mpc8379_mds.dts | 18 +
arch/powerpc/boot/dts/mpc8379_rdb.dts | 18 +
arch/powerpc/boot/dts/mpc8536ds.dts | 18 +
arch/powerpc/boot/dts/mpc8540ads.dts | 31 +
arch/powerpc/boot/dts/mpc8541cds.dts | 18 +
arch/powerpc/boot/dts/mpc8544ds.dts | 20 +
arch/powerpc/boot/dts/mpc8548cds.dts | 44 +
arch/powerpc/boot/dts/mpc8555cds.dts | 18 +
arch/powerpc/boot/dts/mpc8560ads.dts | 18 +
arch/powerpc/boot/dts/mpc8568mds.dts | 18 +
arch/powerpc/boot/dts/mpc8572ds.dts | 45 +
arch/powerpc/boot/dts/mpc8641_hpcn.dts | 45 +
arch/powerpc/boot/dts/sbc8349.dts | 18 +
arch/powerpc/boot/dts/sbc8548.dts | 18 +
arch/powerpc/boot/dts/sbc8560.dts | 18 +
arch/powerpc/boot/dts/sbc8641d.dts | 44 +
arch/powerpc/boot/dts/stx_gp3_8560.dts | 18 +
arch/powerpc/boot/dts/tqm8540.dts | 28 +
arch/powerpc/boot/dts/tqm8541.dts | 18 +
arch/powerpc/boot/dts/tqm8548-bigflash.dts | 44 +
arch/powerpc/boot/dts/tqm8548.dts | 44 +
arch/powerpc/boot/dts/tqm8555.dts | 18 +
arch/powerpc/boot/dts/tqm8560.dts | 18 +
arch/powerpc/sysdev/fsl_soc.c | 241 +-
arch/s390/appldata/appldata_net_sum.c | 4 +-
arch/sparc64/kernel/idprom.c | 5 +-
arch/um/drivers/daemon_kern.c | 2 +-
arch/um/drivers/mcast_kern.c | 2 +-
arch/um/drivers/net_kern.c | 29 +-
arch/um/drivers/pcap_kern.c | 2 +-
arch/um/drivers/slip_kern.c | 2 +-
arch/um/drivers/slirp_kern.c | 2 +-
arch/um/drivers/vde_kern.c | 2 +-
arch/um/os-Linux/drivers/ethertap_kern.c | 2 +-
arch/um/os-Linux/drivers/tuntap_kern.c | 2 +-
arch/xtensa/platforms/iss/network.c | 21 +-
drivers/atm/Kconfig | 6 +
drivers/atm/Makefile | 1 +
drivers/atm/solos-pci.c | 790 ++
drivers/block/aoe/aoe.h | 1 -
drivers/block/aoe/aoeblk.c | 2 +-
drivers/block/aoe/aoecmd.c | 22 +-
drivers/block/aoe/aoenet.c | 11 -
drivers/bluetooth/Kconfig | 20 -
drivers/bluetooth/Makefile | 1 -
drivers/bluetooth/bcm203x.c | 9 +-
drivers/bluetooth/bfusb.c | 11 +-
drivers/bluetooth/bpa10x.c | 7 +-
drivers/bluetooth/bt3c_cs.c | 8 +-
drivers/bluetooth/btsdio.c | 6 +-
drivers/bluetooth/btusb.c | 229 +-
drivers/bluetooth/hci_bcsp.c | 5 -
drivers/bluetooth/hci_h4.c | 5 -
drivers/bluetooth/hci_ldisc.c | 9 +-
drivers/bluetooth/hci_usb.c | 1136 ---
drivers/bluetooth/hci_usb.h | 129 -
drivers/bluetooth/hci_vhci.c | 5 -
drivers/firmware/iscsi_ibft.c | 7 +-
drivers/infiniband/core/sysfs.c | 10 +-
drivers/infiniband/hw/amso1100/c2_provider.c | 8 +-
drivers/infiniband/hw/mthca/mthca_mcg.c | 23 +-
drivers/infiniband/hw/nes/nes.c | 17 +-
drivers/infiniband/hw/nes/nes_cm.c | 31 +-
drivers/infiniband/hw/nes/nes_hw.c | 2 +-
drivers/infiniband/hw/nes/nes_nic.c | 13 +-
drivers/infiniband/hw/nes/nes_utils.c | 5 +-
drivers/infiniband/ulp/ipoib/ipoib.h | 23 -
drivers/infiniband/ulp/ipoib/ipoib_cm.c | 8 +-
drivers/infiniband/ulp/ipoib/ipoib_ib.c | 6 +-
drivers/infiniband/ulp/ipoib/ipoib_main.c | 25 +-
drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 70 +-
drivers/infiniband/ulp/iser/iser_verbs.c | 8 +-
drivers/infiniband/ulp/srp/ib_srp.c | 31 +-
drivers/isdn/gigaset/asyncdata.c | 18 +-
drivers/isdn/gigaset/bas-gigaset.c | 13 +-
drivers/isdn/gigaset/common.c | 21 +-
drivers/isdn/gigaset/ev-layer.c | 42 +-
drivers/isdn/gigaset/gigaset.h | 20 +-
drivers/isdn/gigaset/i4l.c | 4 +-
drivers/isdn/gigaset/interface.c | 52 +-
drivers/isdn/gigaset/isocdata.c | 6 +-
drivers/isdn/gigaset/ser-gigaset.c | 32 +-
drivers/isdn/gigaset/usb-gigaset.c | 14 +-
drivers/isdn/hardware/eicon/di.c | 28 +-
drivers/isdn/hardware/eicon/message.c | 60 +-
drivers/isdn/hardware/mISDN/hfc_multi.h | 4 +-
drivers/isdn/hardware/mISDN/hfcmulti.c | 67 +-
drivers/isdn/hysdn/hysdn_net.c | 6 +-
drivers/isdn/i4l/isdn_concap.c | 4 +-
drivers/isdn/i4l/isdn_net.c | 224 +-
drivers/isdn/i4l/isdn_net.h | 50 +-
drivers/isdn/i4l/isdn_ppp.c | 32 +-
drivers/isdn/mISDN/core.c | 8 +-
drivers/isdn/mISDN/dsp_audio.c | 2 +-
drivers/isdn/mISDN/dsp_cmx.c | 8 +-
drivers/isdn/mISDN/dsp_core.c | 4 +-
drivers/isdn/mISDN/dsp_hwec.c | 2 +-
drivers/isdn/mISDN/dsp_pipeline.c | 2 +-
drivers/isdn/mISDN/dsp_tones.c | 92 +-
drivers/isdn/mISDN/l1oip_codec.c | 1 +
drivers/isdn/mISDN/l1oip_core.c | 22 +-
drivers/isdn/mISDN/layer1.c | 3 +-
drivers/isdn/mISDN/layer2.c | 16 +-
drivers/isdn/mISDN/socket.c | 2 +-
drivers/isdn/mISDN/stack.c | 2 +-
drivers/isdn/mISDN/tei.c | 4 +-
drivers/isdn/mISDN/timerdev.c | 9 +-
drivers/media/dvb/b2c2/flexcop.c | 2 +-
drivers/media/dvb/bt8xx/dst.c | 4 +-
drivers/media/dvb/dm1105/dm1105.c | 3 +-
drivers/media/dvb/dvb-core/dvb_net.c | 37 +-
drivers/media/dvb/dvb-usb/dvb-usb-dvb.c | 5 +-
drivers/media/dvb/pluto2/pluto2.c | 3 +-
drivers/message/fusion/mptlan.c | 22 +-
drivers/message/fusion/mptlan.h | 2 +-
drivers/misc/sgi-xp/xpnet.c | 13 +-
drivers/net/3c501.c | 3 +-
drivers/net/3c501.h | 2 +-
drivers/net/3c503.c | 21 +-
drivers/net/3c505.c | 51 +-
drivers/net/3c507.c | 15 +-
drivers/net/3c509.c | 6 +-
drivers/net/3c515.c | 13 +-
drivers/net/3c523.c | 46 +-
drivers/net/3c527.c | 4 +-
drivers/net/3c59x.c | 13 +-
drivers/net/7990.c | 1 -
drivers/net/8139cp.c | 47 +-
drivers/net/8139too.c | 57 +-
drivers/net/82596.c | 48 +-
drivers/net/8390.c | 50 +-
drivers/net/8390.h | 15 +
drivers/net/8390p.c | 50 +-
drivers/net/Kconfig | 64 +-
drivers/net/Makefile | 11 +-
drivers/net/a2065.c | 5 +-
drivers/net/ac3200.c | 5 +-
drivers/net/acenic.c | 37 +-
drivers/net/amd8111e.c | 12 +-
drivers/net/apne.c | 29 +-
drivers/net/appletalk/cops.c | 9 -
drivers/net/appletalk/ipddp.c | 6 +-
drivers/net/appletalk/ltpc.c | 13 +-
drivers/net/arcnet/arc-rawmode.c | 5 +-
drivers/net/arcnet/arc-rimi.c | 16 +-
drivers/net/arcnet/arcnet.c | 32 +-
drivers/net/arcnet/capmode.c | 9 +-
drivers/net/arcnet/com20020-isa.c | 4 +-
drivers/net/arcnet/com20020-pci.c | 2 +-
drivers/net/arcnet/com20020.c | 10 +-
drivers/net/arcnet/com90io.c | 4 +-
drivers/net/arcnet/com90xx.c | 12 +-
drivers/net/arcnet/rfc1051.c | 9 +-
drivers/net/arcnet/rfc1201.c | 14 +-
drivers/net/ariadne.c | 21 +-
drivers/net/arm/Kconfig | 10 +-
drivers/net/arm/Makefile | 3 +-
drivers/net/arm/am79c961a.c | 7 +-
drivers/net/arm/at91_ether.c | 11 +-
drivers/net/arm/ep93xx_eth.c | 8 +-
drivers/net/arm/ether1.c | 5 +-
drivers/net/arm/ether3.c | 5 +-
drivers/net/arm/etherh.c | 24 +-
drivers/net/arm/ixp4xx_eth.c | 344 +-
drivers/net/arm/ks8695net.c | 1676 ++++
drivers/net/arm/ks8695net.h | 107 +
drivers/net/at1700.c | 16 +-
drivers/net/atarilance.c | 52 +-
drivers/net/atl1e/atl1e_main.c | 47 +-
drivers/net/atlx/atl1.c | 102 +-
drivers/net/atlx/atl1.h | 4 +-
drivers/net/atlx/atl2.c | 101 +-
drivers/net/atlx/atl2.h | 1 -
drivers/net/atlx/atlx.c | 13 -
drivers/net/atp.c | 29 +-
drivers/net/au1000_eth.c | 50 +-
drivers/net/ax88796.c | 9 +-
drivers/net/b44.c | 13 +-
drivers/net/bfin_mac.c | 1 -
drivers/net/bmac.c | 7 +-
drivers/net/bnx2.c | 94 +-
drivers/net/bnx2.h | 42 +-
drivers/net/bnx2x_link.c | 72 +-
drivers/net/bnx2x_link.h | 10 +-
drivers/net/bnx2x_main.c | 95 +-
drivers/net/bonding/Makefile | 3 +
drivers/net/bonding/bond_3ad.c | 667 +-
drivers/net/bonding/bond_3ad.h | 59 +-
drivers/net/bonding/bond_alb.c | 37 +-
drivers/net/bonding/bond_ipv6.c | 216 +
drivers/net/bonding/bond_main.c | 477 +-
drivers/net/bonding/bond_sysfs.c | 160 +-
drivers/net/bonding/bonding.h | 68 +-
drivers/net/can/vcan.c | 24 +-
drivers/net/cassini.c | 16 +-
drivers/net/chelsio/cxgb2.c | 94 +-
drivers/net/chelsio/sge.c | 10 +-
drivers/net/cpmac.c | 15 +-
drivers/net/cris/eth_v10.c | 4 +-
drivers/net/cs89x0.c | 16 +-
drivers/net/cxgb3/adapter.h | 5 +-
drivers/net/cxgb3/common.h | 4 +-
drivers/net/cxgb3/cxgb3_ctl_defs.h | 17 +
drivers/net/cxgb3/cxgb3_main.c | 130 +-
drivers/net/cxgb3/cxgb3_offload.c | 76 +-
drivers/net/cxgb3/sge.c | 105 +-
drivers/net/cxgb3/t3_hw.c | 26 +-
drivers/net/cxgb3/version.h | 2 +-
drivers/net/cxgb3/vsc8211.c | 2 +
drivers/net/de600.c | 4 +-
drivers/net/de620.c | 26 +-
drivers/net/declance.c | 7 +-
drivers/net/defxx.c | 27 +-
drivers/net/depca.c | 54 +-
drivers/net/dl2k.c | 28 +-
drivers/net/dm9000.c | 40 +-
drivers/net/dummy.c | 15 +-
drivers/net/e100.c | 68 +-
drivers/net/e1000/e1000.h | 1 -
drivers/net/e1000/e1000_main.c | 107 +-
drivers/net/e1000e/82571.c | 19 +-
drivers/net/e1000e/defines.h | 8 +
drivers/net/e1000e/e1000.h | 2 +
drivers/net/e1000e/es2lan.c | 194 +-
drivers/net/e1000e/ethtool.c | 82 +-
drivers/net/e1000e/hw.h | 8 +-
drivers/net/e1000e/ich8lan.c | 151 +-
drivers/net/e1000e/lib.c | 80 +-
drivers/net/e1000e/netdev.c | 131 +-
drivers/net/e1000e/phy.c | 12 +-
drivers/net/e2100.c | 24 +-
drivers/net/eepro.c | 10 +-
drivers/net/eepro100.c | 2401 ------
drivers/net/eexpress.c | 3 +-
drivers/net/ehea/ehea.h | 2 +-
drivers/net/ehea/ehea_main.c | 7 +-
drivers/net/ehea/ehea_qmr.c | 18 +-
drivers/net/enc28j60.c | 49 +-
drivers/net/enic/cq_desc.h | 5 +-
drivers/net/enic/enic.h | 2 +-
drivers/net/enic/enic_main.c | 86 +-
drivers/net/enic/enic_res.c | 7 +-
drivers/net/enic/enic_res.h | 4 -
drivers/net/enic/vnic_dev.c | 70 +-
drivers/net/enic/vnic_devcmd.h | 19 +-
drivers/net/enic/vnic_intr.h | 2 +-
drivers/net/enic/vnic_resource.h | 2 +-
drivers/net/enic/vnic_rq.h | 9 +-
drivers/net/enic/vnic_rss.h | 13 +
drivers/net/enic/vnic_wq.h | 9 +-
drivers/net/epic100.c | 56 +-
drivers/net/eql.c | 12 +-
drivers/net/es3210.c | 34 +-
drivers/net/eth16i.c | 15 +-
drivers/net/ewrk3.c | 18 +-
drivers/net/fealnx.c | 6 +-
drivers/net/fec.c | 6 +-
drivers/net/fec_mpc52xx.c | 3 +-
drivers/net/forcedeth.c | 90 +-
drivers/net/fs_enet/fs_enet-main.c | 9 +-
drivers/net/gianfar.c | 861 ++-
drivers/net/gianfar.h | 78 +-
drivers/net/gianfar_ethtool.c | 89 +-
drivers/net/gianfar_mii.c | 212 +-
drivers/net/gianfar_mii.h | 2 +
drivers/net/hamachi.c | 27 +-
drivers/net/hamradio/6pack.c | 1 -
drivers/net/hamradio/baycom_epp.c | 1 -
drivers/net/hamradio/bpqether.c | 8 +-
drivers/net/hamradio/dmascc.c | 13 +-
drivers/net/hamradio/hdlcdrv.c | 1 -
drivers/net/hamradio/mkiss.c | 4 +-
drivers/net/hamradio/scc.c | 13 +-
drivers/net/hamradio/yam.c | 1 -
drivers/net/hp-plus.c | 27 +-
drivers/net/hp.c | 25 +-
drivers/net/hp100.c | 24 +-
drivers/net/hydra.c | 28 +-
drivers/net/ibm_newemac/core.c | 11 +-
drivers/net/ibmlana.c | 6 +-
drivers/net/ibmveth.c | 46 +-
drivers/net/ifb.c | 13 +-
drivers/net/igb/e1000_defines.h | 7 +-
drivers/net/igb/e1000_mac.c | 25 +-
drivers/net/igb/e1000_regs.h | 4 +
drivers/net/igb/igb.h | 44 +-
drivers/net/igb/igb_ethtool.c | 131 +-
drivers/net/igb/igb_main.c | 403 +-
drivers/net/ioc3-eth.c | 13 +-
drivers/net/ipg.c | 9 -
drivers/net/irda/ali-ircc.c | 17 +-
drivers/net/irda/au1k_ir.c | 1 -
drivers/net/irda/donauboe.c | 8 +-
drivers/net/irda/irda-usb.c | 15 +-
drivers/net/irda/irtty-sir.c | 7 +-
drivers/net/irda/kingsun-sir.c | 1 -
drivers/net/irda/ks959-sir.c | 1 -
drivers/net/irda/ksdazzle-sir.c | 1 -
drivers/net/irda/ma600-sir.c | 2 +-
drivers/net/irda/mcs7780.c | 1 -
drivers/net/irda/nsc-ircc.c | 17 +-
drivers/net/irda/pxaficp_ir.c | 4 -
drivers/net/irda/sa1100_ir.c | 28 +-
drivers/net/irda/sir_dev.c | 12 +-
drivers/net/irda/smsc-ircc2.c | 6 +-
drivers/net/irda/stir4200.c | 1 -
drivers/net/irda/via-ircc.c | 16 +-
drivers/net/irda/vlsi_ir.c | 37 +-
drivers/net/irda/w83977af_ir.c | 29 +-
drivers/net/isa-skeleton.c | 16 +-
drivers/net/iseries_veth.c | 14 +-
drivers/net/ixgb/ixgb_main.c | 58 +-
drivers/net/ixgbe/Makefile | 2 +
drivers/net/ixgbe/ixgbe.h | 32 +-
drivers/net/ixgbe/ixgbe_82598.c | 192 +-
drivers/net/ixgbe/ixgbe_dcb.c | 332 +
drivers/net/ixgbe/ixgbe_dcb.h | 184 +
drivers/net/ixgbe/ixgbe_dcb_82598.c | 398 +
drivers/net/ixgbe/ixgbe_dcb_82598.h | 94 +
drivers/net/ixgbe/ixgbe_dcb_nl.c | 641 ++
drivers/net/ixgbe/ixgbe_ethtool.c | 134 +-
drivers/net/ixgbe/ixgbe_main.c | 485 +-
drivers/net/ixgbe/ixgbe_phy.c | 326 +
drivers/net/ixgbe/ixgbe_phy.h | 25 +
drivers/net/ixgbe/ixgbe_type.h | 28 +-
drivers/net/ixp2000/ixpdev.c | 6 +-
drivers/net/jazzsonic.c | 4 +-
drivers/net/jme.c | 71 +-
drivers/net/jme.h | 34 +-
drivers/net/korina.c | 5 +-
drivers/net/lance.c | 32 +-
drivers/net/lib82596.c | 14 +-
drivers/net/lib8390.c | 20 +-
drivers/net/lne390.c | 29 +-
drivers/net/loopback.c | 29 +-
drivers/net/lp486e.c | 29 +-
drivers/net/mac8390.c | 22 +-
drivers/net/mac89x0.c | 16 +-
drivers/net/macb.c | 18 +-
drivers/net/mace.c | 34 +-
drivers/net/macmace.c | 6 +-
drivers/net/macsonic.c | 9 +-
drivers/net/macvlan.c | 49 +-
drivers/net/meth.c | 4 +-
drivers/net/mlx4/en_cq.c | 4 +-
drivers/net/mlx4/en_netdev.c | 48 +-
drivers/net/mlx4/en_params.c | 20 +-
drivers/net/mlx4/en_rx.c | 9 +-
drivers/net/mlx4/en_tx.c | 29 +-
drivers/net/mlx4/mcg.c | 25 +-
drivers/net/mlx4/mlx4_en.h | 12 +-
drivers/net/mv643xx_eth.c | 525 +-
drivers/net/mvme147.c | 9 +-
drivers/net/myri10ge/myri10ge.c | 71 +-
drivers/net/myri10ge/myri10ge_mcp.h | 175 +-
drivers/net/myri10ge/myri10ge_mcp_gen_header.h | 2 +
drivers/net/myri_sbus.c | 27 +-
drivers/net/natsemi.c | 12 +-
drivers/net/ne-h8300.c | 30 +-
drivers/net/ne.c | 29 +-
drivers/net/ne2.c | 29 +-
drivers/net/ne2k-pci.c | 28 +-
drivers/net/ne3210.c | 31 +-
drivers/net/netconsole.c | 9 +-
drivers/net/netx-eth.c | 1 -
drivers/net/netxen/netxen_nic_ethtool.c | 10 +-
drivers/net/netxen/netxen_nic_hw.c | 6 +-
drivers/net/netxen/netxen_nic_init.c | 2 -
drivers/net/netxen/netxen_nic_main.c | 57 +-
drivers/net/netxen/netxen_nic_niu.c | 7 +-
drivers/net/ni5010.c | 15 +-
drivers/net/ni52.c | 43 +-
drivers/net/ni65.c | 39 +-
drivers/net/niu.c | 145 +-
drivers/net/niu.h | 2 +-
drivers/net/ns83820.c | 28 +-
drivers/net/pasemi_mac.c | 14 +-
drivers/net/pasemi_mac_ethtool.c | 4 +-
drivers/net/pci-skeleton.c | 8 +-
drivers/net/pcmcia/3c574_cs.c | 6 +-
drivers/net/pcmcia/3c589_cs.c | 6 +-
drivers/net/pcmcia/axnet_cs.c | 22 +-
drivers/net/pcmcia/com20020_cs.c | 6 +-
drivers/net/pcmcia/fmvj18x_cs.c | 79 +-
drivers/net/pcmcia/nmclan_cs.c | 6 +-
drivers/net/pcmcia/pcnet_cs.c | 3 +-
drivers/net/pcmcia/smc91c92_cs.c | 5 +-
drivers/net/pcmcia/xirc2ps_cs.c | 6 +-
drivers/net/pcnet32.c | 10 +-
drivers/net/phy/Kconfig | 23 +-
drivers/net/phy/Makefile | 5 +-
drivers/net/phy/broadcom.c | 216 +-
drivers/net/phy/et1011c.c | 113 +
drivers/net/phy/mdio-gpio.c | 296 +
drivers/net/phy/mdio-ofgpio.c | 204 -
drivers/net/phy/mdio_bus.c | 40 +-
drivers/net/phy/national.c | 155 +
drivers/net/phy/phy.c | 2 +-
drivers/net/phy/phy_device.c | 54 +-
drivers/net/phy/smsc.c | 28 +
drivers/net/phy/ste10Xp.c | 137 +
drivers/net/plip.c | 35 +-
drivers/net/ppp_async.c | 6 -
drivers/net/ppp_generic.c | 206 +-
drivers/net/ppp_synctty.c | 6 -
drivers/net/pppoe.c | 5 +-
drivers/net/pppol2tp.c | 94 +-
drivers/net/ps3_gelic_net.c | 6 +-
drivers/net/ps3_gelic_wireless.c | 37 +-
drivers/net/ps3_gelic_wireless.h | 4 +-
drivers/net/qla3xxx.c | 42 +-
drivers/net/qlge/qlge_ethtool.c | 2 +-
drivers/net/qlge/qlge_main.c | 79 +-
drivers/net/qlge/qlge_mpi.c | 2 +-
drivers/net/r6040.c | 51 +-
drivers/net/r8169.c | 57 +-
drivers/net/rionet.c | 31 +-
drivers/net/rrunner.c | 25 +-
drivers/net/s2io.c | 146 +-
drivers/net/sb1000.c | 1 -
drivers/net/sb1250-mac.c | 11 +-
drivers/net/sc92031.c | 30 +-
drivers/net/seeq8005.c | 13 +-
drivers/net/sfc/Kconfig | 8 +
drivers/net/sfc/Makefile | 5 +-
drivers/net/sfc/boards.c | 206 +-
drivers/net/sfc/boards.h | 14 +-
drivers/net/sfc/efx.c | 449 +-
drivers/net/sfc/efx.h | 12 +-
drivers/net/sfc/enum.h | 36 +-
drivers/net/sfc/ethtool.c | 175 +-
drivers/net/sfc/falcon.c | 476 +-
drivers/net/sfc/falcon.h | 3 +
drivers/net/sfc/falcon_gmac.c | 229 +
drivers/net/sfc/falcon_hwdefs.h | 161 +-
drivers/net/sfc/falcon_xmac.c | 261 +-
drivers/net/sfc/gmii.h | 137 +-
drivers/net/sfc/mac.h | 16 +-
drivers/net/sfc/mdio_10g.c | 483 +-
drivers/net/sfc/mdio_10g.h | 63 +-
drivers/net/sfc/mtd.c | 268 +
drivers/net/sfc/net_driver.h | 131 +-
drivers/net/sfc/phy.h | 7 +-
drivers/net/sfc/rx.c | 2 +-
drivers/net/sfc/selftest.c | 145 +-
drivers/net/sfc/selftest.h | 14 +-
drivers/net/sfc/sfe4001.c | 225 +-
drivers/net/sfc/spi.h | 34 +-
drivers/net/sfc/tenxpress.c | 796 ++-
drivers/net/sfc/workarounds.h | 12 +-
drivers/net/sfc/xfp_phy.c | 29 +-
drivers/net/sgiseeq.c | 7 +-
drivers/net/sh_eth.c | 3 +-
drivers/net/sis190.c | 7 +-
drivers/net/sis900.c | 99 +-
drivers/net/skfp/skfddi.c | 27 +-
drivers/net/skge.c | 103 +-
drivers/net/sky2.c | 56 +-
drivers/net/slip.c | 12 +-
drivers/net/smc-mca.c | 27 +-
drivers/net/smc-ultra.c | 27 +-
drivers/net/smc-ultra32.c | 5 +-
drivers/net/smc911x.c | 16 +-
drivers/net/smc9194.c | 13 +-
drivers/net/smc91x.c | 42 +-
drivers/net/smc91x.h | 58 +-
drivers/net/smsc911x.c | 2071 +++++
drivers/net/smsc911x.h | 390 +
drivers/net/smsc9420.c | 1744 ++++
drivers/net/smsc9420.h | 275 +
drivers/net/sonic.c | 1 -
drivers/net/sonic.h | 20 +-
drivers/net/spider_net.c | 17 +-
drivers/net/spider_net_ethtool.c | 8 +-
drivers/net/starfire.c | 24 +-
drivers/net/stnic.c | 25 +-
drivers/net/sun3_82586.c | 40 +-
drivers/net/sun3lance.c | 10 +-
drivers/net/sunbmac.c | 22 +-
drivers/net/sundance.c | 6 +-
drivers/net/sungem.c | 65 +-
drivers/net/sunhme.c | 31 +-
drivers/net/sunlance.c | 7 +-
drivers/net/sunqe.c | 15 +-
drivers/net/sunvnet.c | 5 +-
drivers/net/tc35815.c | 49 +-
drivers/net/tehuti.c | 73 +-
drivers/net/tg3.c | 1068 ++-
drivers/net/tg3.h | 188 +-
drivers/net/tlan.c | 213 +-
drivers/net/tokenring/3c359.c | 13 +-
drivers/net/tokenring/Kconfig | 2 +-
drivers/net/tokenring/abyss.c | 4 +-
drivers/net/tokenring/ibmtr.c | 15 +-
drivers/net/tokenring/lanstreamer.c | 36 +-
drivers/net/tokenring/madgemc.c | 12 +-
drivers/net/tokenring/olympic.c | 52 +-
drivers/net/tokenring/proteon.c | 7 +-
drivers/net/tokenring/skisa.c | 7 +-
drivers/net/tokenring/smctr.c | 2 -
drivers/net/tokenring/tms380tr.c | 15 +-
drivers/net/tokenring/tmspci.c | 5 +-
drivers/net/tsi108_eth.c | 12 +-
drivers/net/tulip/de2104x.c | 54 +-
drivers/net/tulip/de4x5.c | 17 +-
drivers/net/tulip/dmfe.c | 7 +-
drivers/net/tulip/eeprom.c | 2 +-
drivers/net/tulip/interrupt.c | 10 +-
drivers/net/tulip/tulip_core.c | 15 +-
drivers/net/tulip/uli526x.c | 8 +-
drivers/net/tulip/winbond-840.c | 16 +-
drivers/net/tulip/xircom_cb.c | 4 +-
drivers/net/tun.c | 33 +-
drivers/net/typhoon.c | 15 +-
drivers/net/ucc_geth.c | 408 +-
drivers/net/ucc_geth.h | 1 +
drivers/net/usb/asix.c | 5 +-
drivers/net/usb/catc.c | 43 +-
drivers/net/usb/dm9601.c | 5 +-
drivers/net/usb/hso.c | 34 +-
drivers/net/usb/kaweth.c | 17 +-
drivers/net/usb/mcs7830.c | 9 +-
drivers/net/usb/pegasus.c | 74 +-
drivers/net/usb/rtl8150.c | 38 +-
drivers/net/usb/smsc95xx.c | 110 +-
drivers/net/usb/usbnet.c | 5 +-
drivers/net/veth.c | 30 +-
drivers/net/via-rhine.c | 47 +-
drivers/net/via-velocity.c | 28 +-
drivers/net/virtio_net.c | 217 +-
drivers/net/wan/Kconfig | 9 +
drivers/net/wan/Makefile | 3 +-
drivers/net/wan/c101.c | 6 +-
drivers/net/wan/cosa.c | 1 -
drivers/net/wan/cycx_x25.c | 91 +-
drivers/net/wan/dlci.c | 37 +-
drivers/net/wan/dscc4.c | 4 +-
drivers/net/wan/farsync.c | 2 -
drivers/net/wan/{hd6457x.c => hd64570.c} | 255 +-
drivers/net/wan/hd64572.c | 640 ++
drivers/net/wan/hdlc_fr.c | 10 +-
drivers/net/wan/hdlc_ppp.c | 649 ++-
drivers/net/wan/hostess_sv11.c | 1 -
drivers/net/wan/ixp4xx_hss.c | 1325 +++
drivers/net/wan/lapbether.c | 3 -
drivers/net/wan/lmc/lmc_main.c | 1 -
drivers/net/wan/lmc/lmc_proto.c | 1 -
drivers/net/wan/n2.c | 9 +-
drivers/net/wan/pc300_drv.c | 22 +-
drivers/net/wan/pc300too.c | 121 +-
drivers/net/wan/pci200syn.c | 79 +-
drivers/net/wan/sbni.c | 101 +-
drivers/net/wan/sdla.c | 48 +-
drivers/net/wan/sealevel.c | 1 -
drivers/net/wan/syncppp.c | 1480 ----
drivers/net/wan/wanxl.c | 9 +-
drivers/net/wan/x25_asy.c | 52 +-
drivers/net/wan/z85230.c | 12 +-
drivers/net/wd.c | 29 +-
drivers/net/wireless/Kconfig | 163 +-
drivers/net/wireless/Makefile | 22 +-
drivers/net/wireless/adm8211.c | 52 +-
drivers/net/wireless/adm8211.h | 2 -
drivers/net/wireless/airo.c | 243 +-
drivers/net/wireless/arlan-main.c | 27 +-
drivers/net/wireless/ath5k/ath5k.h | 102 +-
drivers/net/wireless/ath5k/attach.c | 14 +-
drivers/net/wireless/ath5k/base.c | 191 +-
drivers/net/wireless/ath5k/desc.c | 4 +-
drivers/net/wireless/ath5k/dma.c | 190 +-
drivers/net/wireless/ath5k/eeprom.c | 1194 +++-
drivers/net/wireless/ath5k/eeprom.h | 253 +-
drivers/net/wireless/ath5k/initvals.c | 8 +-
drivers/net/wireless/ath5k/pcu.c | 233 +-
drivers/net/wireless/ath5k/phy.c | 9 +-
drivers/net/wireless/ath5k/qcu.c | 37 +-
drivers/net/wireless/ath5k/reg.h | 16 +-
drivers/net/wireless/ath5k/reset.c | 9 +-
drivers/net/wireless/ath9k/Kconfig | 11 +
drivers/net/wireless/ath9k/Makefile | 9 +-
drivers/net/wireless/ath9k/ani.c | 852 ++
drivers/net/wireless/ath9k/ath9k.h | 432 +-
drivers/net/wireless/ath9k/beacon.c | 319 +-
drivers/net/wireless/ath9k/calib.c | 1021 +++
drivers/net/wireless/ath9k/core.c | 1886 -----
drivers/net/wireless/ath9k/core.h | 926 +--
drivers/net/wireless/ath9k/debug.c | 262 +
drivers/net/wireless/ath9k/eeprom.c | 2824 +++++++
drivers/net/wireless/ath9k/hw.c | 8490 +++++---------------
drivers/net/wireless/ath9k/hw.h | 165 +-
drivers/net/wireless/ath9k/initvals.h | 1938 +++++-
drivers/net/wireless/ath9k/mac.c | 946 +++
drivers/net/wireless/ath9k/main.c | 2353 ++++--
drivers/net/wireless/ath9k/phy.c | 24 +-
drivers/net/wireless/ath9k/phy.h | 5 +
drivers/net/wireless/ath9k/rc.c | 1832 ++---
drivers/net/wireless/ath9k/rc.h | 220 +-
drivers/net/wireless/ath9k/recv.c | 1242 +---
drivers/net/wireless/ath9k/reg.h | 109 +-
drivers/net/wireless/ath9k/regd.c | 85 +-
drivers/net/wireless/ath9k/regd.h | 2 +-
drivers/net/wireless/ath9k/xmit.c | 1532 ++--
drivers/net/wireless/atmel.c | 79 +-
drivers/net/wireless/b43/b43.h | 1 -
drivers/net/wireless/b43/debugfs.c | 1 +
drivers/net/wireless/b43/debugfs.h | 1 +
drivers/net/wireless/b43/dma.c | 4 +-
drivers/net/wireless/b43/main.c | 280 +-
drivers/net/wireless/b43/phy_a.c | 4 +-
drivers/net/wireless/b43/phy_common.c | 18 +
drivers/net/wireless/b43/phy_g.c | 28 +-
drivers/net/wireless/b43/pio.c | 3 +-
drivers/net/wireless/b43/xmit.c | 64 +-
drivers/net/wireless/b43/xmit.h | 5 +-
drivers/net/wireless/b43legacy/b43legacy.h | 5 +-
drivers/net/wireless/b43legacy/debugfs.c | 2 +-
drivers/net/wireless/b43legacy/dma.c | 48 +-
drivers/net/wireless/b43legacy/main.c | 211 +-
drivers/net/wireless/b43legacy/phy.c | 6 +-
drivers/net/wireless/b43legacy/pio.c | 31 +-
drivers/net/wireless/b43legacy/xmit.c | 26 +-
drivers/net/wireless/b43legacy/xmit.h | 2 +-
drivers/net/wireless/hostap/Kconfig | 13 +-
drivers/net/wireless/hostap/hostap.h | 2 +-
drivers/net/wireless/hostap/hostap_80211.h | 2 +-
drivers/net/wireless/hostap/hostap_80211_rx.c | 72 +-
drivers/net/wireless/hostap/hostap_80211_tx.c | 23 +-
drivers/net/wireless/hostap/hostap_ap.c | 253 +-
drivers/net/wireless/hostap/hostap_ap.h | 8 +-
drivers/net/wireless/hostap/hostap_common.h | 13 -
drivers/net/wireless/hostap/hostap_hw.c | 71 +-
drivers/net/wireless/hostap/hostap_info.c | 16 +-
drivers/net/wireless/hostap/hostap_ioctl.c | 157 +-
drivers/net/wireless/hostap/hostap_main.c | 45 +-
drivers/net/wireless/hostap/hostap_pci.c | 2 +-
drivers/net/wireless/hostap/hostap_proc.c | 35 +-
drivers/net/wireless/hostap/hostap_wlan.h | 8 +-
drivers/net/wireless/ipw2x00/Kconfig | 191 +
drivers/net/wireless/ipw2x00/Makefile | 14 +
drivers/net/wireless/{ => ipw2x00}/ipw2100.c | 71 +-
drivers/net/wireless/{ => ipw2x00}/ipw2100.h | 0
drivers/net/wireless/{ => ipw2x00}/ipw2200.c | 482 +-
drivers/net/wireless/{ => ipw2x00}/ipw2200.h | 2 +
.../net/wireless/ipw2x00/libipw_geo.c | 0
.../net/wireless/ipw2x00/libipw_module.c | 51 +-
.../net/wireless/ipw2x00/libipw_rx.c | 124 +-
.../net/wireless/ipw2x00/libipw_tx.c | 7 +-
.../net/wireless/ipw2x00/libipw_wx.c | 98 +-
drivers/net/wireless/iwlwifi/Kconfig | 2 +
drivers/net/wireless/iwlwifi/Makefile | 3 +-
drivers/net/wireless/iwlwifi/iwl-3945-commands.h | 148 +-
drivers/net/wireless/iwlwifi/iwl-3945-core.h | 28 +-
drivers/net/wireless/iwlwifi/iwl-3945-debug.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-3945-hw.h | 4 +-
drivers/net/wireless/iwlwifi/iwl-3945-io.h | 24 +-
drivers/net/wireless/iwlwifi/iwl-3945-led.c | 2 +-
drivers/net/wireless/iwlwifi/iwl-3945-led.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-3945-rs.c | 223 +-
drivers/net/wireless/iwlwifi/iwl-3945-rs.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-3945.c | 125 +-
drivers/net/wireless/iwlwifi/iwl-3945.h | 40 +-
drivers/net/wireless/iwlwifi/iwl-4965-hw.h | 203 +-
drivers/net/wireless/iwlwifi/iwl-4965.c | 251 +-
drivers/net/wireless/iwlwifi/iwl-5000-hw.h | 64 +-
drivers/net/wireless/iwlwifi/iwl-5000.c | 440 +-
drivers/net/wireless/iwlwifi/iwl-agn-hcmd-check.c | 108 +
drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 179 +-
drivers/net/wireless/iwlwifi/iwl-agn-rs.h | 22 +-
drivers/net/wireless/iwlwifi/iwl-agn.c | 1241 +--
drivers/net/wireless/iwlwifi/iwl-calib.c | 19 +-
drivers/net/wireless/iwlwifi/iwl-calib.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-commands.h | 536 +-
drivers/net/wireless/iwlwifi/iwl-core.c | 335 +-
drivers/net/wireless/iwlwifi/iwl-core.h | 78 +-
drivers/net/wireless/iwlwifi/iwl-csr.h | 8 +-
drivers/net/wireless/iwlwifi/iwl-debug.h | 33 +-
drivers/net/wireless/iwlwifi/iwl-debugfs.c | 83 +-
drivers/net/wireless/iwlwifi/iwl-dev.h | 183 +-
drivers/net/wireless/iwlwifi/iwl-eeprom.c | 50 +-
drivers/net/wireless/iwlwifi/iwl-eeprom.h | 15 +-
drivers/net/wireless/iwlwifi/iwl-fh.h | 173 +-
drivers/net/wireless/iwlwifi/iwl-hcmd.c | 4 +-
drivers/net/wireless/iwlwifi/iwl-helpers.h | 111 +-
drivers/net/wireless/iwlwifi/iwl-io.h | 37 +-
drivers/net/wireless/iwlwifi/iwl-led.c | 7 +-
drivers/net/wireless/iwlwifi/iwl-led.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-power.c | 38 +-
drivers/net/wireless/iwlwifi/iwl-power.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-prph.h | 8 +-
drivers/net/wireless/iwlwifi/iwl-rfkill.c | 12 +-
drivers/net/wireless/iwlwifi/iwl-rfkill.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-rx.c | 230 +-
drivers/net/wireless/iwlwifi/iwl-scan.c | 131 +-
drivers/net/wireless/iwlwifi/iwl-spectrum.c | 198 +
drivers/net/wireless/iwlwifi/iwl-spectrum.h | 3 +-
drivers/net/wireless/iwlwifi/iwl-sta.c | 259 +-
drivers/net/wireless/iwlwifi/iwl-sta.h | 16 +-
drivers/net/wireless/iwlwifi/iwl-tx.c | 438 +-
drivers/net/wireless/iwlwifi/iwl3945-base.c | 751 +-
drivers/net/wireless/libertas/assoc.c | 69 +-
drivers/net/wireless/libertas/cmd.c | 32 +-
drivers/net/wireless/libertas/cmd.h | 3 +-
drivers/net/wireless/libertas/debugfs.c | 11 +-
drivers/net/wireless/libertas/decl.h | 4 -
drivers/net/wireless/libertas/defs.h | 14 +-
drivers/net/wireless/libertas/dev.h | 7 +-
drivers/net/wireless/libertas/ethtool.c | 14 +-
drivers/net/wireless/libertas/host.h | 9 +
drivers/net/wireless/libertas/hostcmd.h | 26 +-
drivers/net/wireless/libertas/if_sdio.c | 3 +-
drivers/net/wireless/libertas/if_usb.c | 7 +-
drivers/net/wireless/libertas/main.c | 135 +-
drivers/net/wireless/libertas/persistcfg.c | 18 +-
drivers/net/wireless/libertas/radiotap.h | 3 -
drivers/net/wireless/libertas/scan.c | 105 +-
drivers/net/wireless/libertas/scan.h | 4 +
drivers/net/wireless/libertas/tx.c | 2 +-
drivers/net/wireless/libertas/types.h | 5 +-
drivers/net/wireless/libertas/wext.c | 80 +-
drivers/net/wireless/libertas_tf/cmd.c | 5 +-
drivers/net/wireless/libertas_tf/main.c | 8 +-
drivers/net/wireless/mac80211_hwsim.c | 294 +-
drivers/net/wireless/netwave_cs.c | 6 +-
drivers/net/wireless/orinoco/Makefile | 12 +
drivers/net/wireless/{ => orinoco}/airport.c | 2 +-
drivers/net/wireless/{ => orinoco}/hermes.c | 0
drivers/net/wireless/{ => orinoco}/hermes.h | 0
drivers/net/wireless/{ => orinoco}/hermes_dld.c | 0
drivers/net/wireless/{ => orinoco}/hermes_dld.h | 0
drivers/net/wireless/{ => orinoco}/hermes_rid.h | 0
drivers/net/wireless/{ => orinoco}/orinoco.c | 231 +-
drivers/net/wireless/{ => orinoco}/orinoco.h | 9 +
drivers/net/wireless/{ => orinoco}/orinoco_cs.c | 10 +-
.../net/wireless/{ => orinoco}/orinoco_nortel.c | 0
drivers/net/wireless/{ => orinoco}/orinoco_pci.c | 0
drivers/net/wireless/{ => orinoco}/orinoco_pci.h | 0
drivers/net/wireless/{ => orinoco}/orinoco_plx.c | 0
drivers/net/wireless/{ => orinoco}/orinoco_tmd.c | 0
drivers/net/wireless/{ => orinoco}/spectrum_cs.c | 31 +-
drivers/net/wireless/p54/p54.h | 74 +-
drivers/net/wireless/p54/p54common.c | 1620 +++-
drivers/net/wireless/p54/p54common.h | 349 +-
drivers/net/wireless/p54/p54pci.c | 70 +-
drivers/net/wireless/p54/p54pci.h | 2 +-
drivers/net/wireless/p54/p54usb.c | 261 +-
drivers/net/wireless/p54/p54usb.h | 1 +
drivers/net/wireless/prism54/isl_ioctl.c | 24 +-
drivers/net/wireless/prism54/islpci_hotplug.c | 8 +-
drivers/net/wireless/ray_cs.c | 12 +-
drivers/net/wireless/rndis_wlan.c | 95 +-
drivers/net/wireless/rt2x00/Kconfig | 1 +
drivers/net/wireless/rt2x00/rt2400pci.c | 373 +-
drivers/net/wireless/rt2x00/rt2400pci.h | 2 +
drivers/net/wireless/rt2x00/rt2500pci.c | 407 +-
drivers/net/wireless/rt2x00/rt2500pci.h | 2 +
drivers/net/wireless/rt2x00/rt2500usb.c | 443 +-
drivers/net/wireless/rt2x00/rt2500usb.h | 5 +
drivers/net/wireless/rt2x00/rt2x00.h | 113 +-
drivers/net/wireless/rt2x00/rt2x00config.c | 202 +-
drivers/net/wireless/rt2x00/rt2x00crypto.c | 79 +-
drivers/net/wireless/rt2x00/rt2x00debug.c | 47 +-
drivers/net/wireless/rt2x00/rt2x00debug.h | 13 +
drivers/net/wireless/rt2x00/rt2x00dev.c | 86 +-
drivers/net/wireless/rt2x00/rt2x00leds.c | 88 +-
drivers/net/wireless/rt2x00/rt2x00lib.h | 33 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 56 +-
drivers/net/wireless/rt2x00/rt2x00pci.c | 41 +-
drivers/net/wireless/rt2x00/rt2x00pci.h | 37 +-
drivers/net/wireless/rt2x00/rt2x00queue.c | 94 +-
drivers/net/wireless/rt2x00/rt2x00queue.h | 47 +-
drivers/net/wireless/rt2x00/rt2x00usb.c | 145 +-
drivers/net/wireless/rt2x00/rt2x00usb.h | 141 +-
drivers/net/wireless/rt2x00/rt61pci.c | 469 +-
drivers/net/wireless/rt2x00/rt61pci.h | 2 +
drivers/net/wireless/rt2x00/rt73usb.c | 689 +-
drivers/net/wireless/rt2x00/rt73usb.h | 2 +
drivers/net/wireless/rtl818x/Makefile | 7 +
drivers/net/wireless/{ => rtl818x}/rtl8180.h | 0
drivers/net/wireless/{ => rtl818x}/rtl8180_dev.c | 48 +-
.../net/wireless/{ => rtl818x}/rtl8180_grf5101.c | 0
.../net/wireless/{ => rtl818x}/rtl8180_grf5101.h | 0
.../net/wireless/{ => rtl818x}/rtl8180_max2820.c | 0
.../net/wireless/{ => rtl818x}/rtl8180_max2820.h | 0
.../net/wireless/{ => rtl818x}/rtl8180_rtl8225.c | 14 +-
.../net/wireless/{ => rtl818x}/rtl8180_rtl8225.h | 0
.../net/wireless/{ => rtl818x}/rtl8180_sa2400.c | 0
.../net/wireless/{ => rtl818x}/rtl8180_sa2400.h | 0
drivers/net/wireless/{ => rtl818x}/rtl8187.h | 8 +-
drivers/net/wireless/{ => rtl818x}/rtl8187_dev.c | 459 +-
.../net/wireless/{ => rtl818x}/rtl8187_rtl8225.c | 397 +-
.../net/wireless/{ => rtl818x}/rtl8187_rtl8225.h | 0
drivers/net/wireless/{ => rtl818x}/rtl818x.h | 1 +
drivers/net/wireless/strip.c | 22 +-
drivers/net/wireless/wavelan.c | 122 +-
drivers/net/wireless/wavelan_cs.c | 39 +-
drivers/net/wireless/wl3501.h | 4 +-
drivers/net/wireless/wl3501_cs.c | 11 +-
drivers/net/wireless/zd1201.c | 131 +-
drivers/net/wireless/zd1211rw/zd_chip.c | 4 +-
drivers/net/wireless/zd1211rw/zd_mac.c | 44 +-
drivers/net/wireless/zd1211rw/zd_usb.c | 2 +-
drivers/net/xen-netfront.c | 9 +-
drivers/net/xtsonic.c | 6 +-
drivers/net/yellowfin.c | 42 +-
drivers/net/znet.c | 28 +-
drivers/net/zorro8390.c | 29 +-
drivers/parisc/led.c | 4 +-
drivers/s390/net/lcs.c | 12 +-
drivers/s390/net/qeth_core_offl.c | 8 +-
drivers/s390/net/qeth_l2_main.c | 18 +-
drivers/scsi/iscsi_tcp.c | 4 +-
drivers/scsi/qla4xxx/ql4_os.c | 3 +-
drivers/ssb/main.c | 11 +-
drivers/ssb/pcihost_wrapper.c | 2 +-
drivers/staging/slicoss/slicoss.c | 7 +-
drivers/staging/winbond/linux/wbusb.c | 6 +-
drivers/staging/wlan-ng/p80211netdev.c | 20 +-
drivers/staging/wlan-ng/p80211wext.c | 58 +-
drivers/usb/atm/cxacru.c | 4 +-
drivers/usb/atm/usbatm.c | 5 +-
drivers/usb/gadget/f_phonet.c | 621 ++
drivers/usb/gadget/u_ether.c | 10 +-
drivers/usb/gadget/u_phonet.h | 21 +
drivers/uwb/wlp/eda.c | 38 +-
firmware/Makefile | 3 +
firmware/WHENCE | 11 +
firmware/cxgb3/t3b_psram-1.1.0.bin.ihex | 162 +
firmware/cxgb3/t3c_psram-1.1.0.bin.ihex | 162 +
firmware/cxgb3/t3fw-7.0.0.bin.ihex | 1881 +++++
fs/afs/proc.c | 4 +-
fs/afs/server.c | 9 +-
fs/cifs/cifs_spnego.c | 6 +-
fs/cifs/connect.c | 4 +-
fs/dlm/netlink.c | 2 +-
fs/lockd/host.c | 8 +-
fs/lockd/mon.c | 2 +-
fs/nfs/nfsroot.c | 6 +-
fs/nfs/super.c | 6 +-
fs/nfsd/nfs4state.c | 4 +-
fs/nfsd/nfsctl.c | 2 +-
fs/ocfs2/cluster/netdebug.c | 8 +-
fs/ocfs2/cluster/nodemanager.c | 2 +-
fs/ocfs2/cluster/tcp.c | 29 +-
include/linux/atm.h | 17 +-
include/linux/atmdev.h | 15 +
include/linux/cgroup_subsys.h | 6 +
include/linux/dcbnl.h | 340 +
include/linux/dccp.h | 42 +-
include/linux/etherdevice.h | 46 +
include/linux/ethtool.h | 2 +
include/linux/fddidevice.h | 1 +
include/linux/filter.h | 3 +-
include/linux/fsl_devices.h | 18 +-
include/linux/hdlc.h | 4 +-
include/linux/hippidevice.h | 4 +-
include/linux/ieee80211.h | 212 +-
include/linux/if.h | 1 +
include/linux/if_arp.h | 3 +
include/linux/in.h | 4 +
include/linux/ipv6.h | 1 +
include/linux/kernel.h | 12 -
include/linux/list_nulls.h | 94 +
include/linux/mdio-gpio.h | 25 +
include/linux/mii.h | 33 +
include/linux/mroute6.h | 26 +-
include/linux/netdevice.h | 400 +-
include/linux/netfilter_bridge/ebtables.h | 3 +-
include/linux/netfilter_ipv4/ipt_policy.h | 2 +
include/linux/netfilter_ipv6/ip6t_policy.h | 2 +
include/linux/netlink.h | 3 +-
include/linux/netpoll.h | 5 -
include/linux/nl80211.h | 223 +-
include/linux/phy.h | 2 +
include/linux/pkt_cls.h | 14 +
include/linux/pkt_sched.h | 16 +
include/linux/rculist_nulls.h | 110 +
include/linux/rfkill.h | 8 +-
include/linux/rtnetlink.h | 5 +
include/linux/skbuff.h | 54 +-
include/linux/smsc911x.h | 47 +
include/linux/snmp.h | 3 +
include/linux/sunrpc/svc_xprt.h | 8 +-
include/linux/virtio_net.h | 9 +
include/linux/xfrm.h | 14 +
include/net/bluetooth/bluetooth.h | 4 +-
include/net/bluetooth/hci.h | 2 +-
include/net/cfg80211.h | 142 +-
include/net/checksum.h | 2 +-
include/net/dcbnl.h | 53 +
include/net/dn.h | 8 +-
include/net/dn_fib.h | 6 +-
include/net/dst.h | 39 +-
include/net/flow.h | 9 +-
include/net/gen_stats.h | 3 +-
include/net/ieee80211.h | 148 +-
include/net/ieee80211_radiotap.h | 15 +-
include/net/inet_hashtables.h | 85 +-
include/net/inet_timewait_sock.h | 10 +-
include/net/ip.h | 3 +-
include/net/ip_vs.h | 17 +-
include/net/{ieee80211_crypt.h => lib80211.h} | 75 +-
include/net/mac80211.h | 446 +-
include/net/ndisc.h | 14 +
include/net/neighbour.h | 15 +-
include/net/net_namespace.h | 22 +
include/net/netfilter/nf_conntrack.h | 5 +-
include/net/netfilter/nf_conntrack_ecache.h | 57 +-
include/net/netfilter/nf_conntrack_expect.h | 2 +
include/net/netfilter/nf_conntrack_helper.h | 5 +-
include/net/netfilter/nf_conntrack_l4proto.h | 2 +-
include/net/netfilter/nf_conntrack_tuple.h | 12 +-
include/net/netfilter/nfnetlink_log.h | 14 +
include/net/netlink.h | 24 +-
include/net/netns/ipv4.h | 2 +
include/net/netns/ipv6.h | 12 +
include/net/netns/mib.h | 3 +
include/net/netns/x_tables.h | 5 +
include/net/netns/xfrm.h | 56 +
include/net/phonet/pep.h | 2 +-
include/net/phonet/phonet.h | 2 +-
include/net/phonet/pn_dev.h | 2 +-
include/net/pkt_cls.h | 2 +-
include/net/protocol.h | 3 +
include/net/sch_generic.h | 38 +-
include/net/sctp/sctp.h | 9 +-
include/net/sctp/user.h | 2 +
include/net/sock.h | 86 +-
include/net/syncppp.h | 102 -
include/net/tcp.h | 20 +-
include/net/udp.h | 25 +-
include/net/udplite.h | 2 +-
include/net/wireless.h | 90 +-
include/net/xfrm.h | 110 +-
lib/vsprintf.c | 77 +
net/802/fddi.c | 8 +-
net/802/hippi.c | 14 +-
net/802/tr.c | 24 +-
net/8021q/vlan.c | 26 +-
net/8021q/vlan.h | 6 +-
net/8021q/vlan_core.c | 2 -
net/8021q/vlan_dev.c | 76 +-
net/9p/trans_rdma.c | 2 -
net/Kconfig | 7 +-
net/Makefile | 4 +-
net/appletalk/aarp.c | 3 +-
net/appletalk/ddp.c | 5 +-
net/appletalk/sysctl_net_atalk.c | 14 +-
net/atm/atm_sysfs.c | 2 +-
net/atm/br2684.c | 7 +-
net/atm/clip.c | 4 +-
net/atm/common.h | 1 +
net/atm/ioctl.c | 49 +-
net/atm/lec.c | 60 +-
net/atm/mpc.c | 40 +-
net/atm/mpoa_caches.c | 18 +-
net/atm/pvc.c | 3 +
net/atm/resources.c | 88 +-
net/atm/resources.h | 2 +-
net/atm/svc.c | 19 +
net/ax25/ax25_in.c | 41 +-
net/ax25/sysctl_net_ax25.c | 58 +-
net/bluetooth/af_bluetooth.c | 50 +-
net/bluetooth/bnep/bnep.h | 2 +-
net/bluetooth/bnep/core.c | 8 +-
net/bluetooth/bnep/netdev.c | 11 +-
net/bluetooth/bnep/sock.c | 5 -
net/bluetooth/cmtp/capi.c | 5 -
net/bluetooth/cmtp/core.c | 5 -
net/bluetooth/cmtp/sock.c | 5 -
net/bluetooth/hci_conn.c | 5 -
net/bluetooth/hci_core.c | 11 +-
net/bluetooth/hci_event.c | 5 -
net/bluetooth/hci_sock.c | 5 -
net/bluetooth/hci_sysfs.c | 12 +-
net/bluetooth/hidp/core.c | 5 -
net/bluetooth/hidp/sock.c | 5 -
net/bluetooth/l2cap.c | 5 -
net/bluetooth/rfcomm/core.c | 5 -
net/bluetooth/rfcomm/sock.c | 9 +-
net/bluetooth/rfcomm/tty.c | 48 +-
net/bluetooth/sco.c | 5 -
net/bridge/br_device.c | 20 +-
net/bridge/br_if.c | 4 +-
net/bridge/br_netfilter.c | 13 +-
net/bridge/br_sysfs_br.c | 2 +-
net/bridge/netfilter/ebt_log.c | 18 +-
net/bridge/netfilter/ebtable_broute.c | 26 +-
net/bridge/netfilter/ebtable_filter.c | 41 +-
net/bridge/netfilter/ebtable_nat.c | 38 +-
net/bridge/netfilter/ebtables.c | 52 +-
net/can/raw.c | 22 +-
net/core/datagram.c | 5 +-
net/core/dev.c | 458 +-
net/core/dst.c | 6 +-
net/core/ethtool.c | 53 +-
net/core/fib_rules.c | 7 +-
net/core/filter.c | 19 +
net/core/flow.c | 6 +-
net/core/gen_estimator.c | 97 +-
net/core/neighbour.c | 73 +-
net/core/net-sysfs.c | 15 +-
net/core/net_namespace.c | 2 -
net/core/netpoll.c | 20 +-
net/core/pktgen.c | 42 +-
net/core/rtnetlink.c | 15 +-
net/core/skbuff.c | 277 +-
net/core/sock.c | 46 +-
net/core/sysctl_net_core.c | 68 +-
net/dcb/Kconfig | 22 +
net/dcb/Makefile | 1 +
net/dcb/dcbnl.c | 1122 +++
net/dccp/ackvec.c | 9 +-
net/dccp/ackvec.h | 5 +-
net/dccp/ccid.c | 62 +-
net/dccp/ccid.h | 26 +-
net/dccp/ccids/ccid2.c | 6 +-
net/dccp/dccp.h | 17 +-
net/dccp/diag.c | 11 +-
net/dccp/feat.c | 1458 +++-
net/dccp/feat.h | 130 +-
net/dccp/input.c | 44 +-
net/dccp/ipv4.c | 13 +-
net/dccp/ipv6.c | 15 +-
net/dccp/minisocks.c | 54 +-
net/dccp/options.c | 229 +-
net/dccp/output.c | 19 +-
net/dccp/probe.c | 19 +-
net/dccp/proto.c | 224 +-
net/dccp/sysctl.c | 21 -
net/dccp/timer.c | 12 -
net/decnet/af_decnet.c | 62 +-
net/decnet/dn_dev.c | 22 +-
net/decnet/dn_neigh.c | 18 +-
net/decnet/dn_nsp_in.c | 28 +-
net/decnet/dn_nsp_out.c | 23 +-
net/decnet/dn_route.c | 29 +-
net/decnet/dn_table.c | 2 +-
net/decnet/sysctl_net_decnet.c | 48 +-
net/dsa/mv88e6060.c | 6 +-
net/dsa/mv88e6123_61_65.c | 4 +-
net/dsa/mv88e6131.c | 4 +-
net/dsa/mv88e6xxx.c | 2 +-
net/dsa/slave.c | 2 +-
net/dsa/tag_dsa.c | 1 -
net/dsa/tag_edsa.c | 1 -
net/dsa/tag_trailer.c | 1 -
net/ethernet/eth.c | 19 +-
net/ieee80211/Kconfig | 73 -
net/ieee80211/Makefile | 12 -
net/ieee80211/ieee80211_crypt.c | 206 -
net/ipv4/af_inet.c | 116 +-
net/ipv4/ah4.c | 10 +-
net/ipv4/arp.c | 36 +-
net/ipv4/cipso_ipv4.c | 1 -
net/ipv4/devinet.c | 19 +-
net/ipv4/esp4.c | 8 +-
net/ipv4/fib_frontend.c | 10 +-
net/ipv4/fib_hash.c | 12 +-
net/ipv4/fib_semantics.c | 8 +-
net/ipv4/fib_trie.c | 6 +-
net/ipv4/icmp.c | 39 +-
net/ipv4/igmp.c | 95 +-
net/ipv4/inet_connection_sock.c | 31 +-
net/ipv4/inet_diag.c | 31 +-
net/ipv4/inet_hashtables.c | 277 +-
net/ipv4/inet_lro.c | 4 +-
net/ipv4/inet_timewait_sock.c | 48 +-
net/ipv4/inetpeer.c | 2 +-
net/ipv4/ip_forward.c | 2 +-
net/ipv4/ip_fragment.c | 21 +-
net/ipv4/ip_gre.c | 58 +-
net/ipv4/ip_input.c | 10 +-
net/ipv4/ip_output.c | 24 +-
net/ipv4/ip_sockglue.c | 72 +-
net/ipv4/ipcomp.c | 10 +-
net/ipv4/ipconfig.c | 40 +-
net/ipv4/ipip.c | 37 +-
net/ipv4/ipmr.c | 280 +-
net/ipv4/netfilter.c | 7 +-
net/ipv4/netfilter/arp_tables.c | 16 +-
net/ipv4/netfilter/arptable_filter.c | 12 +-
net/ipv4/netfilter/ip_tables.c | 12 +-
net/ipv4/netfilter/ipt_CLUSTERIP.c | 9 +-
net/ipv4/netfilter/ipt_LOG.c | 7 +-
net/ipv4/netfilter/ipt_addrtype.c | 16 +-
net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c | 27 +-
net/ipv4/netfilter/nf_conntrack_proto_icmp.c | 4 +-
net/ipv4/netfilter/nf_nat_h323.c | 58 +-
net/ipv4/netfilter/nf_nat_irc.c | 4 +-
net/ipv4/netfilter/nf_nat_rule.c | 27 +-
net/ipv4/netfilter/nf_nat_sip.c | 18 +-
net/ipv4/netfilter/nf_nat_snmp_basic.c | 9 +-
net/ipv4/proc.c | 8 +-
net/ipv4/raw.c | 10 +-
net/ipv4/route.c | 227 +-
net/ipv4/sysctl_net_ipv4.c | 188 +-
net/ipv4/tcp.c | 130 +-
net/ipv4/tcp_cubic.c | 120 +-
net/ipv4/tcp_diag.c | 2 +-
net/ipv4/tcp_input.c | 511 +-
net/ipv4/tcp_ipv4.c | 137 +-
net/ipv4/tcp_minisocks.c | 2 +-
net/ipv4/tcp_output.c | 219 +-
net/ipv4/tcp_probe.c | 7 +-
net/ipv4/tcp_timer.c | 14 +-
net/ipv4/tcp_yeah.c | 4 +-
net/ipv4/udp.c | 271 +-
net/ipv4/udp_impl.h | 4 +-
net/ipv4/udplite.c | 14 +-
net/ipv4/xfrm4_input.c | 4 +-
net/ipv4/xfrm4_policy.c | 15 +-
net/ipv4/xfrm4_state.c | 2 -
net/ipv6/addrconf.c | 80 +-
net/ipv6/addrlabel.c | 34 +-
net/ipv6/af_inet6.c | 2 +-
net/ipv6/ah6.c | 9 +-
net/ipv6/anycast.c | 6 +-
net/ipv6/datagram.c | 3 +-
net/ipv6/esp6.c | 7 +-
net/ipv6/exthdrs.c | 2 +-
net/ipv6/icmp.c | 21 +-
net/ipv6/inet6_connection_sock.c | 2 +-
net/ipv6/inet6_hashtables.c | 182 +-
net/ipv6/ip6_flowlabel.c | 6 +-
net/ipv6/ip6_output.c | 5 +-
net/ipv6/ip6_tunnel.c | 37 +-
net/ipv6/ip6mr.c | 490 +-
net/ipv6/ipcomp6.c | 10 +-
net/ipv6/ipv6_sockglue.c | 34 +-
net/ipv6/mcast.c | 41 +-
net/ipv6/mip6.c | 3 +-
net/ipv6/ndisc.c | 105 +-
net/ipv6/netfilter.c | 7 +-
net/ipv6/netfilter/ip6t_LOG.c | 7 +-
net/ipv6/netfilter/ip6t_REJECT.c | 2 +-
net/ipv6/netfilter/ip6table_filter.c | 17 +-
net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c | 5 +-
net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c | 2 +-
net/ipv6/netfilter/nf_conntrack_reasm.c | 6 +-
net/ipv6/raw.c | 3 +-
net/ipv6/reassembly.c | 12 +-
net/ipv6/route.c | 47 +-
net/ipv6/sit.c | 35 +-
net/ipv6/syncookies.c | 2 +-
net/ipv6/sysctl_net_ipv6.c | 4 +-
net/ipv6/tcp_ipv6.c | 28 +-
net/ipv6/udp.c | 151 +-
net/ipv6/udp_impl.h | 4 +-
net/ipv6/udplite.c | 9 +-
net/ipv6/xfrm6_input.c | 9 +-
net/ipv6/xfrm6_policy.c | 22 +-
net/ipv6/xfrm6_state.c | 2 -
net/ipv6/xfrm6_tunnel.c | 33 +-
net/ipx/sysctl_net_ipx.c | 2 +-
net/irda/irlan/irlan_client.c | 4 +-
net/irda/irlan/irlan_common.c | 2 +-
net/irda/irlap_frame.c | 17 +-
net/irda/irsysctl.c | 50 +-
net/irda/irttp.c | 14 +-
net/irda/timer.c | 2 +-
net/key/af_key.c | 217 +-
net/llc/af_llc.c | 1 -
net/llc/llc_proc.c | 3 +-
net/llc/sysctl_net_llc.c | 20 +-
net/mac80211/Kconfig | 8 +-
net/mac80211/Makefile | 2 +
net/mac80211/cfg.c | 194 +-
net/mac80211/debugfs.c | 12 +-
net/mac80211/debugfs_key.c | 4 +-
net/mac80211/debugfs_netdev.c | 117 +-
net/mac80211/debugfs_sta.c | 84 +-
net/mac80211/event.c | 5 +-
net/mac80211/ht.c | 265 +-
net/mac80211/ieee80211_i.h | 90 +-
net/mac80211/iface.c | 54 +-
net/mac80211/key.c | 10 +-
net/mac80211/main.c | 284 +-
net/mac80211/mesh.c | 4 +-
net/mac80211/mesh.h | 5 +-
net/mac80211/mesh_hwmp.c | 7 +-
net/mac80211/mesh_plink.c | 49 +-
net/mac80211/mlme.c | 606 +-
net/mac80211/rate.c | 52 +-
net/mac80211/rate.h | 11 +-
net/mac80211/rc80211_minstrel.c | 109 +-
net/mac80211/rc80211_minstrel.h | 2 +
net/mac80211/rc80211_pid.h | 3 +-
net/mac80211/rc80211_pid_algo.c | 38 +-
net/mac80211/rc80211_pid_debugfs.c | 5 +-
net/mac80211/rx.c | 174 +-
net/mac80211/scan.c | 24 +-
net/mac80211/sta_info.c | 37 +-
net/mac80211/sta_info.h | 45 +-
net/mac80211/tkip.c | 10 +-
net/mac80211/tx.c | 462 +-
net/mac80211/util.c | 107 +-
net/mac80211/wep.c | 33 +-
net/mac80211/wep.h | 2 +-
net/mac80211/wext.c | 257 +-
net/mac80211/wme.c | 32 +-
net/mac80211/wpa.c | 32 +-
net/netfilter/Kconfig | 5 +-
net/netfilter/ipvs/ip_vs_conn.c | 20 +-
net/netfilter/ipvs/ip_vs_core.c | 20 +-
net/netfilter/ipvs/ip_vs_ctl.c | 82 +-
net/netfilter/ipvs/ip_vs_dh.c | 34 +-
net/netfilter/ipvs/ip_vs_ftp.c | 13 +-
net/netfilter/ipvs/ip_vs_lblc.c | 69 +-
net/netfilter/ipvs/ip_vs_lblcr.c | 96 +-
net/netfilter/ipvs/ip_vs_lc.c | 3 -
net/netfilter/ipvs/ip_vs_nq.c | 3 -
net/netfilter/ipvs/ip_vs_proto.c | 38 +-
net/netfilter/ipvs/ip_vs_proto_ah_esp.c | 10 +-
net/netfilter/ipvs/ip_vs_proto_tcp.c | 8 +-
net/netfilter/ipvs/ip_vs_proto_udp.c | 8 +-
net/netfilter/ipvs/ip_vs_rr.c | 3 -
net/netfilter/ipvs/ip_vs_sed.c | 3 -
net/netfilter/ipvs/ip_vs_sh.c | 34 +-
net/netfilter/ipvs/ip_vs_sync.c | 4 +-
net/netfilter/ipvs/ip_vs_wlc.c | 3 -
net/netfilter/ipvs/ip_vs_wrr.c | 3 -
net/netfilter/ipvs/ip_vs_xmit.c | 34 +-
net/netfilter/nf_conntrack_acct.c | 2 +-
net/netfilter/nf_conntrack_amanda.c | 1 +
net/netfilter/nf_conntrack_core.c | 61 +-
net/netfilter/nf_conntrack_ecache.c | 14 +-
net/netfilter/nf_conntrack_expect.c | 43 +-
net/netfilter/nf_conntrack_ftp.c | 24 +-
net/netfilter/nf_conntrack_h323_main.c | 13 +-
net/netfilter/nf_conntrack_helper.c | 32 +-
net/netfilter/nf_conntrack_irc.c | 14 +-
net/netfilter/nf_conntrack_netbios_ns.c | 1 +
net/netfilter/nf_conntrack_netlink.c | 201 +-
net/netfilter/nf_conntrack_pptp.c | 1 +
net/netfilter/nf_conntrack_proto_generic.c | 4 +-
net/netfilter/nf_conntrack_proto_gre.c | 2 +-
net/netfilter/nf_conntrack_proto_sctp.c | 30 +-
net/netfilter/nf_conntrack_proto_tcp.c | 50 +-
net/netfilter/nf_conntrack_proto_udp.c | 8 +-
net/netfilter/nf_conntrack_proto_udplite.c | 4 +-
net/netfilter/nf_conntrack_sane.c | 1 +
net/netfilter/nf_conntrack_sip.c | 1 +
net/netfilter/nf_conntrack_standalone.c | 16 +-
net/netfilter/nf_conntrack_tftp.c | 1 +
net/netfilter/nfnetlink_log.c | 4 +-
net/netfilter/xt_NFLOG.c | 5 +-
net/netfilter/xt_dccp.c | 16 +-
net/netfilter/xt_hashlimit.c | 14 +-
net/netfilter/xt_iprange.c | 36 +-
net/netfilter/xt_recent.c | 32 +-
net/netlabel/netlabel_addrlist.c | 4 +-
net/netlabel/netlabel_mgmt.c | 1 -
net/netlink/af_netlink.c | 7 +
net/netlink/attr.c | 8 +-
net/netrom/sysctl_net_netrom.c | 48 +-
net/packet/af_packet.c | 2 +
net/phonet/af_phonet.c | 8 +-
net/phonet/pep-gprs.c | 218 +-
net/phonet/pep.c | 38 +-
net/phonet/pn_dev.c | 6 +-
net/phonet/socket.c | 13 +-
net/phonet/sysctl.c | 4 +-
net/rfkill/rfkill-input.c | 337 +-
net/rfkill/rfkill-input.h | 3 +
net/rfkill/rfkill.c | 183 +-
net/rose/sysctl_net_rose.c | 40 +-
net/rxrpc/af_rxrpc.c | 4 +-
net/rxrpc/ar-connection.c | 2 +-
net/rxrpc/ar-connevent.c | 2 +-
net/rxrpc/ar-error.c | 3 +-
net/rxrpc/ar-local.c | 16 +-
net/rxrpc/ar-peer.c | 8 +-
net/rxrpc/ar-proc.c | 16 +-
net/rxrpc/ar-security.c | 2 +-
net/rxrpc/ar-transport.c | 12 +-
net/rxrpc/rxkad.c | 2 +-
net/sched/Kconfig | 22 +
net/sched/Makefile | 2 +
net/sched/act_api.c | 18 +-
net/sched/act_gact.c | 4 +-
net/sched/act_ipt.c | 4 +-
net/sched/act_mirred.c | 4 +-
net/sched/act_nat.c | 4 +-
net/sched/act_pedit.c | 4 +-
net/sched/act_police.c | 33 +-
net/sched/act_simple.c | 4 +-
net/sched/act_skbedit.c | 4 +-
net/sched/cls_api.c | 3 +-
net/sched/cls_basic.c | 2 +-
net/sched/cls_cgroup.c | 288 +
net/sched/cls_fw.c | 2 +-
net/sched/cls_route.c | 2 +-
net/sched/cls_tcindex.c | 6 -
net/sched/cls_u32.c | 11 +-
net/sched/ematch.c | 18 +-
net/sched/sch_api.c | 50 +-
net/sched/sch_atm.c | 36 +-
net/sched/sch_blackhole.c | 1 +
net/sched/sch_cbq.c | 76 +-
net/sched/sch_drr.c | 519 ++
net/sched/sch_dsmark.c | 22 +-
net/sched/sch_fifo.c | 4 +-
net/sched/sch_generic.c | 40 +-
net/sched/sch_gred.c | 22 +-
net/sched/sch_hfsc.c | 64 +-
net/sched/sch_htb.c | 171 +-
net/sched/sch_multiq.c | 82 +-
net/sched/sch_netem.c | 160 +-
net/sched/sch_prio.c | 50 +-
net/sched/sch_red.c | 33 +-
net/sched/sch_sfq.c | 71 +-
net/sched/sch_tbf.c | 44 +-
net/sched/sch_teql.c | 19 +-
net/sctp/ipv6.c | 35 +-
net/sctp/protocol.c | 29 +-
net/sctp/sm_statefuns.c | 24 +-
net/sctp/socket.c | 206 +-
net/sctp/sysctl.c | 82 +-
net/socket.c | 1 -
net/sunrpc/clnt.c | 8 +-
net/sunrpc/rpcb_clnt.c | 17 +-
net/sunrpc/svcauth_unix.c | 24 +-
net/sunrpc/svcsock.c | 6 +-
net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 4 +-
net/sunrpc/xprtrdma/svc_rdma_sendto.c | 2 +-
net/sunrpc/xprtrdma/svc_rdma_transport.c | 16 +-
net/sunrpc/xprtrdma/transport.c | 14 +-
net/sunrpc/xprtrdma/verbs.c | 16 +-
net/sunrpc/xprtsock.c | 41 +-
net/tipc/eth_media.c | 3 +-
net/tipc/name_table.c | 2 +-
net/unix/af_unix.c | 200 +-
net/unix/garbage.c | 12 +-
net/unix/sysctl_net_unix.c | 3 +-
net/wanrouter/wanmain.c | 36 +-
net/wireless/Kconfig | 30 +
net/wireless/Makefile | 7 +
net/wireless/core.c | 14 +-
net/wireless/core.h | 13 +
net/wireless/lib80211.c | 284 +
.../lib80211_crypt_ccmp.c} | 129 +-
.../lib80211_crypt_tkip.c} | 181 +-
.../lib80211_crypt_wep.c} | 79 +-
net/wireless/nl80211.c | 417 +-
net/wireless/reg.c | 1005 ++-
net/wireless/reg.h | 33 +-
net/wireless/sysfs.c | 25 +-
net/wireless/util.c | 19 +
net/wireless/wext-compat.c | 139 +
net/wireless/wext.c | 2 +-
net/x25/sysctl_net_x25.c | 22 +-
net/xfrm/Makefile | 4 +-
net/xfrm/xfrm_input.c | 25 +-
net/xfrm/xfrm_output.c | 18 +-
net/xfrm/xfrm_policy.c | 511 +-
net/xfrm/xfrm_proc.c | 26 +-
net/xfrm/xfrm_state.c | 407 +-
net/xfrm/xfrm_sysctl.c | 85 +
net/xfrm/xfrm_user.c | 249 +-
security/selinux/avc.c | 4 +-
security/selinux/hooks.c | 4 +-
1395 files changed, 73267 insertions(+), 48032 deletions(-)
delete mode 100644 Documentation/DocBook/wanbook.tmpl
create mode 100644 Documentation/RCU/rculist_nulls.txt
create mode 100644 drivers/atm/solos-pci.c
delete mode 100644 drivers/bluetooth/hci_usb.c
delete mode 100644 drivers/bluetooth/hci_usb.h
create mode 100644 drivers/net/arm/ks8695net.c
create mode 100644 drivers/net/arm/ks8695net.h
create mode 100644 drivers/net/bonding/bond_ipv6.c
delete mode 100644 drivers/net/eepro100.c
create mode 100644 drivers/net/ixgbe/ixgbe_dcb.c
create mode 100644 drivers/net/ixgbe/ixgbe_dcb.h
create mode 100644 drivers/net/ixgbe/ixgbe_dcb_82598.c
create mode 100644 drivers/net/ixgbe/ixgbe_dcb_82598.h
create mode 100644 drivers/net/ixgbe/ixgbe_dcb_nl.c
create mode 100644 drivers/net/phy/et1011c.c
create mode 100644 drivers/net/phy/mdio-gpio.c
delete mode 100644 drivers/net/phy/mdio-ofgpio.c
create mode 100644 drivers/net/phy/national.c
create mode 100644 drivers/net/phy/ste10Xp.c
create mode 100644 drivers/net/sfc/falcon_gmac.c
create mode 100644 drivers/net/sfc/mtd.c
create mode 100644 drivers/net/smsc911x.c
create mode 100644 drivers/net/smsc911x.h
create mode 100644 drivers/net/smsc9420.c
create mode 100644 drivers/net/smsc9420.h
rename drivers/net/wan/{hd6457x.c => hd64570.c} (78%)
create mode 100644 drivers/net/wan/hd64572.c
create mode 100644 drivers/net/wan/ixp4xx_hss.c
delete mode 100644 drivers/net/wan/syncppp.c
create mode 100644 drivers/net/wireless/ath9k/ani.c
create mode 100644 drivers/net/wireless/ath9k/calib.c
delete mode 100644 drivers/net/wireless/ath9k/core.c
create mode 100644 drivers/net/wireless/ath9k/debug.c
create mode 100644 drivers/net/wireless/ath9k/eeprom.c
create mode 100644 drivers/net/wireless/ath9k/mac.c
create mode 100644 drivers/net/wireless/ipw2x00/Kconfig
create mode 100644 drivers/net/wireless/ipw2x00/Makefile
rename drivers/net/wireless/{ => ipw2x00}/ipw2100.c (99%)
rename drivers/net/wireless/{ => ipw2x00}/ipw2100.h (100%)
rename drivers/net/wireless/{ => ipw2x00}/ipw2200.c (97%)
rename drivers/net/wireless/{ => ipw2x00}/ipw2200.h (99%)
rename net/ieee80211/ieee80211_geo.c => drivers/net/wireless/ipw2x00/libipw_geo.c (100%)
rename net/ieee80211/ieee80211_module.c => drivers/net/wireless/ipw2x00/libipw_module.c (88%)
rename net/ieee80211/ieee80211_rx.c => drivers/net/wireless/ipw2x00/libipw_rx.c (94%)
rename net/ieee80211/ieee80211_tx.c => drivers/net/wireless/ipw2x00/libipw_tx.c (98%)
rename net/ieee80211/ieee80211_wx.c => drivers/net/wireless/ipw2x00/libipw_wx.c (91%)
create mode 100644 drivers/net/wireless/iwlwifi/iwl-agn-hcmd-check.c
create mode 100644 drivers/net/wireless/iwlwifi/iwl-spectrum.c
create mode 100644 drivers/net/wireless/orinoco/Makefile
rename drivers/net/wireless/{ => orinoco}/airport.c (99%)
rename drivers/net/wireless/{ => orinoco}/hermes.c (100%)
rename drivers/net/wireless/{ => orinoco}/hermes.h (100%)
rename drivers/net/wireless/{ => orinoco}/hermes_dld.c (100%)
rename drivers/net/wireless/{ => orinoco}/hermes_dld.h (100%)
rename drivers/net/wireless/{ => orinoco}/hermes_rid.h (100%)
rename drivers/net/wireless/{ => orinoco}/orinoco.c (96%)
rename drivers/net/wireless/{ => orinoco}/orinoco.h (96%)
rename drivers/net/wireless/{ => orinoco}/orinoco_cs.c (98%)
rename drivers/net/wireless/{ => orinoco}/orinoco_nortel.c (100%)
rename drivers/net/wireless/{ => orinoco}/orinoco_pci.c (100%)
rename drivers/net/wireless/{ => orinoco}/orinoco_pci.h (100%)
rename drivers/net/wireless/{ => orinoco}/orinoco_plx.c (100%)
rename drivers/net/wireless/{ => orinoco}/orinoco_tmd.c (100%)
rename drivers/net/wireless/{ => orinoco}/spectrum_cs.c (95%)
create mode 100644 drivers/net/wireless/rtl818x/Makefile
rename drivers/net/wireless/{ => rtl818x}/rtl8180.h (100%)
rename drivers/net/wireless/{ => rtl818x}/rtl8180_dev.c (96%)
rename drivers/net/wireless/{ => rtl818x}/rtl8180_grf5101.c (100%)
rename drivers/net/wireless/{ => rtl818x}/rtl8180_grf5101.h (100%)
rename drivers/net/wireless/{ => rtl818x}/rtl8180_max2820.c (100%)
rename drivers/net/wireless/{ => rtl818x}/rtl8180_max2820.h (100%)
rename drivers/net/wireless/{ => rtl818x}/rtl8180_rtl8225.c (98%)
rename drivers/net/wireless/{ => rtl818x}/rtl8180_rtl8225.h (100%)
rename drivers/net/wireless/{ => rtl818x}/rtl8180_sa2400.c (100%)
rename drivers/net/wireless/{ => rtl818x}/rtl8180_sa2400.h (100%)
rename drivers/net/wireless/{ => rtl818x}/rtl8187.h (97%)
rename drivers/net/wireless/{ => rtl818x}/rtl8187_dev.c (79%)
rename drivers/net/wireless/{ => rtl818x}/rtl8187_rtl8225.c (69%)
rename drivers/net/wireless/{ => rtl818x}/rtl8187_rtl8225.h (100%)
rename drivers/net/wireless/{ => rtl818x}/rtl818x.h (98%)
create mode 100644 drivers/usb/gadget/f_phonet.c
create mode 100644 drivers/usb/gadget/u_phonet.h
create mode 100644 firmware/cxgb3/t3b_psram-1.1.0.bin.ihex
create mode 100644 firmware/cxgb3/t3c_psram-1.1.0.bin.ihex
create mode 100644 firmware/cxgb3/t3fw-7.0.0.bin.ihex
create mode 100644 include/linux/dcbnl.h
create mode 100644 include/linux/list_nulls.h
create mode 100644 include/linux/mdio-gpio.h
create mode 100644 include/linux/rculist_nulls.h
create mode 100644 include/linux/smsc911x.h
create mode 100644 include/net/dcbnl.h
rename include/net/{ieee80211_crypt.h => lib80211.h} (58%)
create mode 100644 include/net/netfilter/nfnetlink_log.h
create mode 100644 include/net/netns/xfrm.h
delete mode 100644 include/net/syncppp.h
create mode 100644 net/dcb/Kconfig
create mode 100644 net/dcb/Makefile
create mode 100644 net/dcb/dcbnl.c
delete mode 100644 net/ieee80211/Kconfig
delete mode 100644 net/ieee80211/Makefile
delete mode 100644 net/ieee80211/ieee80211_crypt.c
create mode 100644 net/sched/cls_cgroup.c
create mode 100644 net/sched/sch_drr.c
create mode 100644 net/wireless/lib80211.c
rename net/{ieee80211/ieee80211_crypt_ccmp.c => wireless/lib80211_crypt_ccmp.c} (74%)
rename net/{ieee80211/ieee80211_crypt_tkip.c => wireless/lib80211_crypt_tkip.c} (79%)
rename net/{ieee80211/ieee80211_crypt_wep.c => wireless/lib80211_crypt_wep.c} (74%)
create mode 100644 net/wireless/wext-compat.c
create mode 100644 net/xfrm/xfrm_sysctl.c
ÿôèº{.nÇ+·®+%Ëÿ±éݶ\x17¥wÿº{.nÇ+·¥{±þG«éÿ{ayº\x1dÊÚë,j\a¢f£¢·hïêÿêçz_è®\x03(éÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?¨èÚ&£ø§~á¶iOæ¬z·vØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?I¥
^ permalink raw reply [flat|nested] 39+ messages in thread
* [GIT]: Networking
@ 2008-12-28 8:01 ` David Miller
0 siblings, 0 replies; 39+ messages in thread
From: David Miller @ 2008-12-28 8:01 UTC (permalink / raw)
To: torvalds; +Cc: akpm, netdev, linux-kernel
Here are the pending networking changes for the 2.6.29 merge window.
A lot of what you see follows the usual boiler plate. A driver
maintainer making a lot of changes to driver FOO. Similarly for
maintainers of networking protocols. Another person does a series of
similar sparse warning fixes, etc.
And of course my list of changes is largely composed of merges.
But here are the interesting other changes in here:
1) Socket hashes converted to RCU locking by Eric Dumazet.
Some really excellent stuff, and he's also done some
things to help out socket open/close scalability. Eric
also has some VFS layer changes under review with the
VFS folks to make that area even better.
2) Harvey Harrison has added some new %pX formatting handlers
for ethernet MAC addresses, ipv4 addresses, and ipv6 addresses.
3) Alexey Dobriyan, Benjamin Thery, Daniel Lezcano, and
Eric W. Biederman have made more large strides in namespace
support for networking.
4) Stephen Hemminger has started the long laborious but useful
process of seperating the driver callbacks out of the
network device struct. All unconverted drivers still work
just fine during this transition period, at pretty much no
cost to the fast paths.
5) Ilpo Järvinen implemented resegmentation for the retransmit
queue. This is a very powerful operation which cures the most
expensive aspects during fast recovery after a loss. In such
cases we have to hold onto an entire window of data, and if
that window is very large then when the missing chunk gets
filled in we loop for a long time freeing tons of SKBs.
So as the SACK information advances the edge of packets
received in order, we can coalesce these portions back into
one large TSO'ish SKB. As a result, when the missing piece
of the window is filled in, we do only a small number of
SKB frees. It basically divides the work more evenly over
the process of recovery.
6) Wang Chen went through the entire tree and made sure every
networking driver uses netdev_priv() to get at the driver
private. And as a result we could eliminate the struct netdev
"priv" member entirely.
This set of changes helped spot a few bugs and driver private
memory lifetime issues.
7) Benchmarks over loopback hit the dev->last_rx shared data real
hard on SMP boxes. This jiffies state is only used by bonding,
so we've rearranged things such that only the bonding path even
tries to set this thing.
This work was done by Jay Vosburgh.
Please pull, thanks a lot!
The following changes since commit 4a6908a3a050aacc9c3a2f36b276b46c0629ad91:
Linus Torvalds (1):
Linux 2.6.28
are available in the git repository at:
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-next-2.6.git master
Abbas, Mohamed (3):
iwl3945: add debugfs support
iwl3945: Fix iwl3945 rate scaling.
iwl3945: Fix rate scale for B-mode connection
Abhijeet Kolekar (3):
iwlwifi : fix checkpatch.pl errors
iwl3945 : Fix ad-hoc mode for 3945
iwl3945 : Fix a-band association for passive channels
Adrian Bunk (1):
The overdue eepro100 removal.
Al Viro (1):
ixgbe: section fixes
Alan Cox (2):
tty: Flags should be accessed via the foo_bit interfaces
tty: driverdata and discdata are void *
Alexander Duyck (20):
e1000e: enable ECC correction on 82571 silicon
igb: update name to reflect new hardware
igb: simplify swap in clean_rx_irq if using packet split
igb: Fix tx/rx_ring_count parameters for igb on suspend/resume/ring resize
ixgbe: this patch adds support for DCB to the kernel and ixgbe driver
DCB: Add interface to query for the DCB capabilities of an device.
DCB: Add interface to query # of TCs supported by device
DCB: Add interface to query the state of PFC feature.
DCB: Add support for DCB BCN
e1000e: disable correctable errors for quad ports while going to D3
igb: do not use phy ops in ethtool test cleanup for non-copper parts
igb: remove unneeded bit refrence when enabling jumbo frames
igb: loopback bits not correctly cleared from RCTL register
igb: link up/down messages must follow a specific format
igb: Add support for pci-e Advanced Error Reporting
igb/e1000e: Naming interrupt vectors
igb: update handling of RCTL for smaller buffer sizes
igb: Correctly determine pci-e function number in virtual environment
igb: defeature tx head writeback
igb: re-order queues to support cleaner use of ivar on 82576
Alexey Dobriyan (85):
net: reduce structures when XFRM=n
net: don't use INIT_RCU_HEAD
xfrm: C99 for xfrm_dev_notifier
xfrm: remove unused struct xfrm_policy::next
net: '&' redux
netfilter: netns-aware ipt_addrtype
netfilter: arptable_filter: merge forward hook
netfilter: netns ebtables: part 1
netfilter: netns ebtables: part 2
netfilter: netns ebtables: more cleanup during ebt_unregister_table()
netfilter: netns ebtables: ebtable_broute in netns
netfilter: netns ebtables: ebtable_filter in netns
netfilter: netns ebtables: ebtable_nat in netns
netfilter: netns ebtables: br_nf_pre_routing_finish() fixup
net: #ifdef ->sk_security
net: mark flow_cache_cpu_prepare() as __init
net: remove struct neigh_table::pde
net: remove struct dst_entry::entry_size
net: ifdef struct sock::sk_async_wait_queue
net: use %pF for /proc/net/ptype
ematch: simpler tcf_em_unregister()
netfilter: xt_recent: don't save proc dirs
netfilter: ip6table_filter: merge LOCAL_IN and FORWARD hooks
netfilter: nf_conntrack_proto_gre: spread __exit
net: fix tunnels in netns after ndo_ changes
ah4/ah6: remove useless NULL assignments
xfrm: remove useless forward declarations
xfrm: initialise xfrm_policy_gc_work statically
netns xfrm: add netns boilerplate
netns xfrm: add struct xfrm_state::xs_net
netns xfrm: per-netns xfrm_state_all list
netns xfrm: per-netns xfrm_state_bydst hash
netns xfrm: per-netns xfrm_state_bysrc hash
netns xfrm: per-netns xfrm_state_byspi hash
netns xfrm: per-netns xfrm_state_hmask
netns xfrm: per-netns xfrm_state counts
netns xfrm: per-netns xfrm_hash_work
netns xfrm: per-netns state GC list
netns xfrm: per-netns state GC work
netns xfrm: per-netns km_waitq
netns xfrm: add struct xfrm_policy::xp_net
netns xfrm: per-netns policy list
netns xfrm: per-netns xfrm_policy_byidx hash
netns xfrm: per-netns xfrm_policy_byidx hashmask
netns xfrm: per-netns inexact policies
netns xfrm: per-netns xfrm_policy_bydst hash
netns xfrm: per-netns policy counts
netns xfrm: per-netns policy hash resizing work
netns xfrm: propagate netns into bydst/bysrc/byspi hash functions
netns xfrm: trivial netns propagations
netns xfrm: state flush in netns
netns xfrm: state lookup in netns
netns xfrm: fixup xfrm_alloc_spi()
netns xfrm: finding states in netns
netns xfrm: state walking in netns
netns xfrm: propagate netns into policy byidx hash
netns xfrm: policy insertion in netns
netns xfrm: policy flushing in netns
netns xfrm: finding policy in netns
netns xfrm: policy walking in netns
netns xfrm: lookup in netns
netns xfrm: xfrm_policy_check in netns
netns xfrm: xfrm_route_forward() in netns
netns xfrm: flushing/pruning bundles in netns
netns xfrm: dst garbage-collecting in netns
netns xfrm: xfrm_input() fixup
netns xfrm: per-netns NETLINK_XFRM socket
netns xfrm: xfrm_user module in netns
netns xfrm: pass netns with KM notifications
netns xfrm: KM reporting in netns
netns xfrm: ->dst_lookup in netns
netns xfrm: ->get_saddr in netns
netns xfrm: flush SA/SPDs on netns stop
netns PF_KEY: part 1
netns PF_KEY: part 2
netns PF_KEY: per-netns /proc/pfkey
netns xfrm: AH/ESP in netns!
netns xfrm: per-netns MIBs
netns xfrm: /proc/net/xfrm_stat in netns
netns xfrm: per-netns sysctls
netdev: remove pathetic compile-command lines
hydra: fix compilation
simeth: convert to net_device_ops
netns: igmp: allow IPPROTO_IGMP sockets in netns
netns: igmp: make /proc/net/{igmp,mcfilter} per netns
Alexey Fisher (1):
ipw2200: make association only if SSID is known.
Andrew Morton (1):
drivers/net/smc911x.c: smc911x_drv_probe() cleanup
Andrey Borzenkov (3):
orinoco: reload firmware on resume
orinoco: cache downloadable firmware image in memory for use during resume
orinoco: indicate it is using dBm in wireless_stats and spy
Andrey Yurovsky (4):
ath5k: fix mesh point operation
mac80211: allow all interfaces types to handle RX action frames
mac80211: disable BSSID filtering for mesh interfaces
mac80211_hwsim: enable Mesh Point operation
Andy Fleming (6):
gianfar: Use gfar_halt to stop DMA in gfar_probe
gianfar: Convert gianfar to an of_platform_driver
gianfar: Add macros for stepping through BDs
phylib: Remove unnecessary "reset" fixups in genphy_setup_forced
gianfar: Fix packet drop when out of memory
gianfar: Continue polling until both tx and rx are empty
Andy Gospodarek (1):
bonding: update docs to correctly reflect arp_ip_target behavior
Andy Whitcroft (1):
netfilter: ip{,6}t_policy.h should include xp_policy.h
Anna Neal (2):
libertas: Fine grained configuration of wake-on-lan.
libertas: Create sysfs entry for changing the mesh probe response limit
Anton Vorontsov (7):
ucc_geth: Fix endless loop in stop_{tx,rx} routines
ucc_geth: Fix TX watchdog timeout handling
ucc_geth: Fix IRQ freeing code in ucc_geth_open()
ucc_geth: Cleanup repetitive ucc_geth_memclean() calls
ucc_geth: Fix IO memory (un)mapping code
ucc_geth: Remove UGETH_FILTERING dead code
ucc_geth: Eliminate the need for forward references
Arjan van de Ven (1):
pci: use pci_ioremap_bar() in drivers/net
Arnaldo Carvalho de Melo (1):
dccp_diag: LISTEN sockets don't have CCIDs
Arnaud Ebalard (1):
net: Remove unused parameter of xfrm_gen_index()
Atsushi Nemoto (2):
tc35815: Define more Rx status bits
tc35815: Enable StripCRC feature
Balazs Scheidler (1):
TPROXY: implemented IP_RECVORIGDSTADDR socket option
Baruch Siach (1):
enc28j60: reduce the number of spi transfers in enc28j60_set_bank()
Ben Greear (1):
ipv4: Fix ARP behavior with many mac-vlans
Ben Hutchings (41):
sfc: Correct address of gPXE boot configuration in EEPROM
sfc: Clean up non-volatile memory partitioning
sfc: Expose flash region storing boot code as MTD
sfc: Use lm87 and lm90 drivers for board temperature/power monitoring
sfc: Do not reset when hardware monitor detects a fault
sfc: Fix dependency for SFC_MTD
sfc: Board support fixes
sfc: Change SPI lengths to type size_t
sfc: Remove unneeded register write
sfc: Correct interpretation of second param to ethtool phys_id()
sfc: Clean up waits for flash/EEPROM operations
sfc: Work around unreliable strap pins
sfc: Restore phy_flash_cfg module parameter
sfc: Provide hints to irqbalance daemon
sfc: Abbreviate self-test names so they are not truncated
sfc: Don't count RX checksum errors during loopback self-test
sfc: Remove MII extension cruft
sfc: Add support for MMDs numbered >15
sfc: Add phy_type device attribute
sfc: Clean up board identification
sfc: Clean up MDIO flag setting
sfc: Add support for sub-10G speeds
sfc: Implement auto-negotiation
sfc: Rework MAC, PHY and board event handling
sfc: Add support for Solarflare 10Xpress SFT9001
sfc: Add support for SFN4111T
sfc: Remove leading spaces
sfc: Specify a meaningful component for loopback RX-side and PHY tests
sfc: Use mutex_lock_interruptible() for ethtool EEPROM access
sfc: Use model numbers for PHY type names
sfc: Use kzalloc() to ensure struct efx_spi_device is fully initialised
sfc: Fix synchronisation of efx_mtd_{probe,rename,remove}
sfc: Version 2.3
sfc: Generate unique names for per-NIC workqueues
sfc: Fix unreliable link detection in some loopback modes
sfc: Clean up PHY mode management in loopback self-test
sfc: Merge top-level functions for self-tests
sfc: Add support for multiple PHY self-tests
sfc: SFT9001: Add cable diagnostics
sfc: When disabling the NIC, close the device rather than unregistering it
sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
Benjamin Thery (11):
net: fix /proc/net/ip_mr_cache display - V2
net: /proc/net/ip_mr_cache, display Iif as a signed short
netns: ip6mr: allocate mroute6_socket per-namespace.
netns: ip6mr: dynamically allocates vif6_table
netns: ip6mr: store netns in struct mfc6_cache
netns: ip6mr: dynamically allocate mfc6_cache_array
netns: ip6mr: declare counter cache_resolve_queue_len per-namespace
netns: ip6mr: declare mroute_do_assert and mroute_do_pim per-namespace
netns: ip6mr: declare reg_vif_num per-namespace
netns: ip6mr: declare ip6mr /proc/net entries per-namespace
netns: ip6mr: enable namespace support in ipv6 multicast forwarding code
Benoit PAPILLAULT (2):
ath9k : Display MAC/BB and RF version at startup (v2)
ath5k: fix 802.11 header padding on RX, unpadding on TX
Bob Copeland (11):
mac80211: fix a few typos in mac80211 kernel doc
ath9k: remove useless conditional
ath5k: fix keytable type buglet in ath5k_hw_reset_key
ath5k: enable hardware encryption for WEP
ath5k: update keycache to support TKIP handling
ath5k: set mac address in add_interface
ath5k: preserve higher order bits when setting mac address
ath5k: clean up ath5k_hw_set_key
ath5k: enable combined michael mic in key cache
ath5k: fix endianness of bitwise ops when installing mic
ath5k: correct packet length in tx descriptors
Brian Haley (1):
bonding: send IPv6 neighbor advertisement on failover
Brice Goglin (7):
myri10ge: fix per-slice rx/tx_dropped counters
myri10ge: remove hardcoded sram_size
myri10ge: update DCA comments
myri10ge: update firmware headers
myri10ge: check fragmentation in LRO get_frag_header()
myri10ge: update firmware headers to 1.4.37
myri10ge: update driver version to 1.4.4-1.395
Bruce Allan (11):
e1000e: commit speed/duplex changes for m88 PHY
e1000e: 82571 check for link fix on 82571 serdes
e1000e: update comments listing supported parts for each MAC family
e1000e: check return of pci_save_state
e1000e: ESB2 config after link up
e1000e: link up/down messages must follow a specific format
e1000e: sync change flow control variables with ixgbe
e1000e: cosmetic newline in debug message
e1000e: store EEPROM version number to prevent unnecessary NVM reads
e1000e: fix incorrect link status when switch module pulled
e1000e: check return code from NVM accesses and fix bank detection
Chaithrika U S (1):
phy: Add LSI ET1011C PHY driver
Chatre, Reinette (2):
iwlwifi: replace magic constants with define
iwlwifi: store ucode version number
Chr (1):
p54: initialize all deprecated fields
Christian Lamparter (30):
p54: honour bss_info_changed's short slot time settings
p54: broken out edcf changes
p54: refactor statistic timer code
p54: p54: refactor p54_rx_frame_sent
p54: fix memory management
p54: borrow some setup code from stlc45xx
p54: introduce new names for device firmwares
p54: more definitions form lmac_longbow.h and pda.h
p54: put broadcast frames into the right queues
p54: AP & Ad-hoc testing
p54: enable Mesh Point support
p54: minor fixes
p54pci: cache firmware for suspend/resume
p54: honour bss_info_changed's basic_rates and other settings
p54: fix wmm queue settings
mac80211: add sta_notify_ps callback
p54: revamp station power save management in access point mode
p54: utilize cryptographic accelerator
p54: include support for 2.13.24.0 USB LM87 Firmwares
p54: refactoring
p54: per-device names
p54usb: rewriting rx/tx routines to make use of usb_anchor's facilities
mac80211: integrate sta_notify_ps cmds into sta_notify
p54: enforce strict tx_queue limits
p54: fix oops on faulty devices
p54: move statistic timer update routine into a workqueue
p54: update ACK failure statistic counter in real-time
p54: more accurate rssi to dBm conversion
p54: remove free_on_tx parameter
p54usb: bring first generation devices back to life
Colin McCabe (1):
ath9k: Replace ath9k_opmode with nl80211_iftype
Cyrill Gorcunov (2):
net: ppp_generic - use idr technique instead of cardmaps
net: ppp_generic - use DEFINE_IDR for static initialization
Dai Haruki (9):
gianfar: Optimize interrupt coalescing configuration
gianfar: Fix eTSEC configuration procedure
gianfar: Fix VLAN HW feature related frame/buffer size calculation.
gianfar: Enable padding and Optimize the frame prepended bytes handling
gianfar: Remove unused gfar_add_fcb() function parameter
gianfar: Make all BD status writes 32-bit
gianfar: Add Scatter Gather support
gianfar: Use interface name in interrupt name to distinguish the source.
gianfar: Merge Tx and Rx interrupt for scheduling clean up ring
Daniel C. Halperin (1):
iwlwifi: convert correctly rate_n_flags to PLCP index for mimo3 packets
Daniel Halperin (1):
iwlwifi: Update reclaim flag
Daniel Lezcano (3):
veth: Remove useless veth field
veth: remove unused list
netns: filter out uevent not belonging to init_net
Daniel Silverstone (1):
net: Add support for the KS8695 ethernet devices.
Dave Jones (1):
net: Allow dependancies of FDDI & Tokenring to be modular.
David Brownell (1):
pegasus: minor resource shrinkage
David Kilroy (8):
orinoco: Move sources to a subdirectory
orinoco: Separate fw caching from download
orinoco: Cache Symbol firmware
orinoco: Resume spectrum_cs in the same way as orinoco_cs
orinoco: Provide option to avoid unnecessary fw caching
orinoco: Fix function names used in debug strings
orinoco: Fix inappropriate use of IRQ_BAP
spectrum_cs: Fix function names used in debug strings
David S. Miller (49):
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
Merge branch 'davem-next' of master.kernel.org:/.../jgarzik/netdev-2.6
sunrpc: Fix build warning due to typo in %pI4 format changes.
drivers/net: Kill now superfluous ->last_rx stores.
net/: Kill now superfluous ->last_rx stores.
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
Merge branch 'davem-next' of master.kernel.org:/.../jgarzik/netdev-2.6
Revert "net: Guaranetee the proper ordering of the loopback device."
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-next-2.6
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-next-2.6
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
dm9000: Fix build error.
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
inet_diag: Missed conversion after changing inet ehash lockl to spinlocks.
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-next-2.6
Merge branch 'for-david' of git://git.kernel.org/.../chris/linux-2.6
net: Make sure BHs are disabled in sock_prot_inuse_add()
axnet_cs: Fix build after net device ops ne2k conversion.
Revert "hso: Add TIOCM ioctl handling."
Revert "hso: Fix free of mutexes still in use."
Revert "hso: Fix crashes on close."
smc-mca: Fix build failure due to typo.
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-next-2.6
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
Merge branch 'master' of git://git.kernel.org/.../kaber/nf-next-2.6
phy: Add file missed in previous commit.
Merge branch 'master' of ssh://master.kernel.org/.../rusty/linux-2.6-for-linus
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
Merge branch 'master' of git://git.kernel.org/.../holtmann/bluetooth-next-2.6
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-next-2.6
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
bluetooth: Fix rfcomm_sock_ioctl() build failure with debugging enabled.
bluetooth: Fix unused var warning properly in rfcomm_sock_ioctl().
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-next-2.6
8390/8390p: Fix compat netdev ops handling.
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
bnx2: Don't redefine FLOW_CTRL_{RX,TX}.
bnx2x: Fix namespace collision with FLOW_CTRL_{TX,RX}
Revert "net: release skb->dst in sock_queue_rcv_skb()"
Revert "xfrm: Accept ESP packets regardless of UDP encapsulation mode"
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-next-2.6
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
Merge branch 'for-david' of git://git.kernel.org/.../chris/linux-2.6
net: Fix warning fallout from recent NAPI interface changes.
igb: Fix build warning when DCA is disabled.
Merge branch 'master' of ../net-next-2.6/ into net2629
David Woodhouse (2):
atm: 32-bit ioctl compatibility
atm: Driver for Solos PCI ADSL2+ card.
Denis Joseph Barrow (6):
hso: Add new usb device id's.
hso: Fix crashes on close.
hso: Fix URB submission -EINVAL.
hso: Fix free of mutexes still in use.
hso: Add TIOCM ioctl handling.
hso: Hook up ->reset_resume
Divy Le Ray (8):
cxgb3 - enable lro control through ethtool
cxgb3: set hard_xmit in the netdev_ops
cxgb3: avoid potential memory leak.
cxgb3: integrate FW and protocol engines in the kernel
cxgb3: Update FW loading path.
cxgb3: Add multiple Tx queue support.
cxgb3: untie strict FW matching
cxgb3: add control to access embedded images
Don Skidmore (4):
net: fix dcbnl_setnumtcs operation check
net: fix DCB setstate to return success/failure
net: add DCNA attribute to the BCN interface for DCB
ixgbe: fix the display of DCB control stats in ethtool
Donald Skidmore (1):
ixgbe: add SFP+ driver support
Ed Swierk (1):
forcedeth: power down phy when interface is down
Emmanuel Grumbach (2):
iwlwifi: rename generic iwlagn functions that had a HW specific name
iwlwifi: rename double inclusion protection name in iwl-commands.h
Eric Dumazet (43):
udp: introduce struct udp_table and multiple spinlocks
udp: RCU handling for Unicast packets.
udp: calculate udp_mem based on low memory instead of all memory
udp: udp_get_next() should use spin_unlock_bh()
udp: introduce sk_for_each_rcu_safenext()
udp: Should use spin_lock_bh()/spin_unlock_bh() in udp_lib_unhash()
udp: add a missing smp_wmb() in udp_lib_get_port()
net: sk_free_datagram() should use sk_mem_reclaim_partial()
net: Introduce read_pnet() and write_pnet() helpers
net: ib_net pointer should depends on CONFIG_NET_NS
net: Cleanup of neighbour code
net: speedup dst_release()
rcu: Introduce hlist_nulls variant of hlist
udp: Use hlist_nulls in UDP RCU code
net: Convert TCP & DCCP hash tables to use RCU / hlist_nulls
rcu: documents rculist_nulls
net: make sure struct dst_entry refcount is aligned on 64 bytes
net: Cleanup of af_unix
net: af_unix can make unix_nr_socks visbile in /proc
net: af_unix should update its inuse counter
net: sctp should update its inuse counter
net: af_packet should update its inuse counter
net: make /proc/net/protocols namespace aware
net: inet_diag_handler structs can be const
net: af_unix should use KERN_INFO instead of KERN_DEBUG
net: listening_hash get a spinlock per bucket
net: convert TCP/DCCP ehash rwlocks to spinlocks
net: use net_eq() in INET_MATCH and INET_TW_MATCH
net: some optimizations in af_inet
net: af_netlink should update its inuse counter
net: Convert TCP/DCCP listening hash tables to use RCU
eth: Declare an optimized compare_ether_addr_64bits() function
net: Make sure BHs are disabled in sock_prot_inuse_add()
net: Make sure BHs are disabled in sock_prot_inuse_add()
net: avoid a pair of dst_hold()/dst_release() in ip_append_data()
net: avoid a pair of dst_hold()/dst_release() in ip_push_pending_frames()
net: Make sure BHs are disabled in sock_prot_inuse_add()
net: udp_unhash() can test if sk is hashed
net: Use a percpu_counter for sockets_allocated
net: Use a percpu_counter for orphan_count
net: release skb->dst in sock_queue_rcv_skb()
net: percpu_counter_inc() should not be called in BH-disabled section
vlan: fix convertion to net_device_ops
Eric Leblond (4):
netfilter: xt_NFLOG: don't call nf_log_packet in NFLOG module.
netfilter: nfmark routing in OUTPUT, mangle, NFQUEUE
netfilter: nfmark IPV6 routing in OUTPUT, mangle, NFQUEUE
netfilter: xt_NFLOG is dependant of nfnetlink_log
Eric W. Biederman (6):
netns: Coexist with the sysfs limitations v2
netns: Delete virtual interfaces during namespace cleanup
net: Guaranetee the proper ordering of the loopback device.
net: Don't leak packets when a netns is going down
net: fib_rules ordering fixes.
net: Guaranetee the proper ordering of the loopback device. v2
Fabio Rossi (1):
mac80211: accept empty strings for hidden SSIDs
Fabrice Bellet (1):
iwl3945: iwl3945_mac_get_tsf() should not return zero
Felix Fietkau (4):
minstrel: improve performance for non-MRR drivers
ath5k: ignore the return value of ath5k_hw_noise_floor_calibration
mac80211: fix BUILD_BUG_ON() caused by misalignment on arm
ath5k: Clean up eeprom parsing and add missing calibration data
Florian Fainelli (1):
r6040: bump release number to 0.19
Francois Romieu (1):
r8169: convert to net_device_ops
Gerrit Renker (33):
dccp: Basic data structure for feature negotiation
dccp: Implement lookup table for feature-negotiation information
dccp: List management for new feature negotiation
dccp: Per-socket initialisation of feature negotiation
dccp: Cleanup routines for feature negotiation
dccp: Limit feature negotiation to connection setup phase
dccp: Registration routines for changing feature values
dccp: Query supported CCIDs
dccp: Resolve dependencies of features on choice of CCID
dccp: Mechanism to resolve CCID dependencies
dccp: Deprecate old setsockopt framework
dccp: Feature negotiation for minimum-checksum-coverage
dccp: Deprecate Ack Ratio sysctl
dccp: Tidy up setsockopt calls
dccp: Fix bracing in dccp_feat_list_lookup.
dccp: Set per-connection CCIDs via socket options
dccp: API to query the current TX/RX CCID
dccp: Increase the scope of variable-length htonl/ntohl functions
dccp: Support for Mandatory options
dccp: Header option insertion routine for feature-negotiation
dccp: Insert feature-negotiation options into skb
dccp: Integrate feature-negotiation insertion code
dccp: Preference list reconciliation
dccp: Process incoming Change feature-negotiation options
dccp: Processing Confirm options
dccp: Feature activation handlers
dccp: Integration of dynamic feature activation - part 1 (socket setup)
dccp: Integration of dynamic feature activation - part 2 (server side)
dccp: Integration of dynamic feature activation - part 3 (client side)
dccp: Clean up old feature-negotiation infrastructure
dccp: Remove obsolete parts of the old CCID interface
dccp: Remove manual influence on NDP Count feature
dccp ccid-2: Phase out the use of boolean Ack Vector sysctl
Giuseppe Cavallaro (3):
phy: add natsemi PHY driver
phy: power management support
phy: add the ST ste10Xp PHYs
Guo-Fu Tseng (1):
jme: Remove 64 and 40 bit dma_mask
Halperin, Daniel C (2):
iwlwifi: update iwl-commands.h for 3 stream support
iwlwifi: implement iwl_debug_report_frame for iwlagn
Hannes Eder (37):
pkt_sched: fix sparse warning
mISDN: use NULL pointer instead of plain integer
mISDN: consistently define 'debug' as '*u_int'
mISDN: make global symbols static or include header files
mISDN: un-export symbol 'plx_lock'
mISDN: fix sparse warning: symbol 'nskb' shadows an earlier one
mISDN: fix sparse warning: symbol 'id' shadows an earlier one
mISDN: comment out unused symbols
mISDN: timerdev: use __user for mISDN_read's buffer argument
mISDN: hfcmulti: use __iomem address space modifier
isdn: eicon: fix sparse warning: make global functions static
drivers/net: fix sparse warning: use ANSI-style function declaration
drivers/net: fix sparse warnings: make do-while a compound statement
drivers/net: fix sparse warning: returning void-valued expression
drivers/net: fix sparse warnings: make symbols static
drivers/net/arcnet: fix sparse warnings: make symbols static
drivers/net/atlx: fix sparse warnings: make symbols static
drivers/net/bonding: fix sparse warnings: move decls to header file
drivers/net/cxgb3: comment out dead code
drivers/net/e1000e: fix sparse warnings: make symbols static
drivers/net/enic: fix sparse warning: make symbol static
drivers/net/igb: remove dead code (function 'igb_read_pci_cfg')
drivers/net/irda: fix sparse warnings: make symbols static
drivers/net/ixgbe: fix sparse warnings: make symbols static
drivers/net/netxen: fix sparse warnings: use NULL pointer instead of plain integer
drivers/net/qlge: fix sparse warnings: make symbols static
drivers/net/skfp: fix sparse warnings: make symbols static
drivers/net/tokenring: fix sparse warnings: make symbols static
drivers/net/tulip: fix sparse warnings: make do-while a compound statement
drivers/net/wan: fix sparse warnings: make do-while a compound statement
drivers/net/wan: fix sparse warning: make symbol static
drivers/net/wan/z85230.c: fix sparse warnings: un-EXPORT symbols
drivers/net/wireless: fix sparse warnings: make symbols static
drivers/net/wireless/ath9k: fix sparse warnings: make symbols static
drivers/net/wireless/b43: fix sparse warnings: make symbols static
drivers/net/wireless/ipw2x00: fix sparse warnings: make symbols static
drivers/net/wireless/prism54: fix sparse warnings: make symbols static
Hannes Hering (1):
ehea: Fix some whitespace issues
Harvey Harrison (35):
printk: add %pM format specifier for MAC addresses
printk: add %p6 format specifier for IPv6 addresses
net: replace all current users of NIP6_SEQFMT with %#p6
misc: replace NIP6_FMT with %p6 format specifier
netfilter: replace uses of NIP6_FMT with %p6
net: replace uses of NIP6_FMT with %p6
net, misc: replace uses of NIP6_FMT with %p6
infiniband: use %p6 for printing message ids
infiniband: ipoib replace IPOIB_GID_FMT with %p6
infiniband: remove IPOIB_GID_RAW_ARG, IPOIB_GID_ARG, IPOIB_GID_FMT
uwb: use the %pM formatting specifier in eda.c
net: remove NIP6(), NIP6_FMT, NIP6_SEQFMT and final users
printk: add %I4, %I6, %i4, %i6 format specifiers
net: replace %#p6 format specifier with %pi6
net: replace %p6 with %pI6
printk: remove %p6 format specifier, fix up comments
net: easy removals of HIPQUAD using %pI4 format
net: replace NIPQUAD() in net/ipv4/netfilter/
net: replace NIPQUAD() in net/ipv4/ net/ipv6/
net: replace NIPQUAD() in net/netfilter/
net: replace NIPQUAD() in net/*/
drivers: replace NIPQUAD()
fs: replace NIPQUAD()
misc: replace NIPQUAD()
printk: ipv4 address digits printed in reverse order
ipvs: oldlen, newlen should be be16, not be32
phonet: sparse annotations of protocol, remove forward declaration
tipc: trivial endian annotation in debug statement
isdn: use %pI4, remove get_{u8/u16/u32} and put_{u8/u16/u32} inlines
net: ip_sockglue.c add static, annotate ports' endianness
isdn: isdn_net.c annotate struct ip_ports and trivial sparse fixes
aoe: remove private mac address format function
decnet: remove private wrappers of endian helpers
decnet: compile fix for removal of byteorder wrapper
iwlwifi: remove uses of __constant_{endian} helpers
Helmut Schaa (2):
iwl3945: remove obsolete irq handling
ipw2200: fix scanning while associated
Henning Rogge (1):
nl80211: Add signal strength and bandwith to nl80211station info
Henrique de Moraes Holschuh (7):
rfkill: use killable locks instead of interruptible
rfkill: export global states to rfkill-input
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input
rfkill: honour EPO state when resuming a rfkill controller
rfkill: rate-limit rfkill-input workqueue usage (v3)
rfkill: preserve state across suspend
rfkill: always call get_state() hook on resume
Herbert Xu (11):
net: Add frag_list support to skb_segment
net: Add frag_list support to GSO
net: Add Generic Receive Offload infrastructure
ipv4: Add GRO infrastructure
net: Add skb_gro_receive
tcp: Add GRO support
ethtool: Add GGRO and SGRO ops
e1000e: Add GRO support
tcp: Always set urgent pointer if it's beyond snd_nxt
ipsec: Remove useless ret variable
gro: Fix potential use after free
Herton Ronaldo Krzesinski (6):
rtl8187: adapt for deprecated IEEE80211_CONF_SHORT_SLOT_TIME flag
rtl8187: add short slot handling for 8187B
rtl8187: fix 8187B throughput regression
rtl8187: implement conf_tx callback to configure tx queues
rtl8187: feedback transmitted packets using tx close descriptor for 8187B
rtl8187: Fix crash on unload when using SLUB debug
Holger Eitzenberger (23):
bonding: add and use bond_is_lb()
bonding: use table for mode names
bonding: fix compile error if debug enabled
bonding: use pr_debug instead of own macros
bonding: remove duplicate declarations
bonding: make tbl argument to bond_parse_parm() const
bonding: turn all bond_parm_tbls const
bonding: improve elaborate port_state assignment
bonding: introduce and use port_params structure
bonding: use port_params in __record_pdu()
bonding: use plain memcpy in __record_default()
bonding: init port_params from template
bonding: remove various function declarations
bonding: use port_params in __update_selected()
bonding: use port_params in __update_default_selected()
bonding: use port_params in __update_lacpdu_from_port
802.3ad: make ntt bool
802.3ad: turn ports is_enabled into a bool
802.3ad: turn ports is_individual into a bool
802.3ad: remove typedef around ad_system
802.3ad: initialize ports LACPDU from const initializer
802.3ad: generalize out mac address initializer
802.3ad: use standard ethhdr instead of ad_header
Holger Schurig (1):
wireless: fix two bad print_ssid conversions
Ilpo Järvinen (40):
b43legacy: reindent misleading statement
tcp: collapse more than two on retransmission
tcp: move tcp_simple_retransmit to tcp_input
tcp: more aggressive skipping
tcp: Make SACK code to split only at mss boundaries
tcp: make tcp_sacktag_one able to handle partial skb too
tcp: Try to restore large SKBs while SACK processing
tcp: Make shifting not clear the hints
tcp: add some mibs to track collapsing
tcp: handle shift/merge of cloned skbs too
tcp: tcp_limit_reno_sacked can become static
tcp: skb_shift cannot cache frag ptrs past pskb_expand_head
niu: use net_device_stats nowadays available in net_device
bnx2: use net_device_stats nowadays available in net_device
ne2: silence static never defined warnings
dccp: use roundup instead of opencoding
tcp: force mss equality with the next skb too.
tcp: Fix thinko making the not-shiftable to cover S|R as well
tcp: make mtu probe failure to not break gso'ed skbs unnecessarily
tcp: introduce struct tcp_sacktag_state to reduce arg pressure
tcp: no need to pass prev skb around, reduces arg pressure
tcp: drop tcp_bound_rto, merge content of it tcp_set_rto
tcp: share code through function, not through copy-paste. :-)
tcp: move some parts from tcp_write_xmit
tcp: use tcp_write_xmit also in tcp_push_one
tcp: fix tso_should_defer in 64bit
icsk: join error paths using goto
xfrm6_tunnel: join error paths using goto
ipv6/mcast: join error paths using goto
ip6mr: use goto to common label instead of opencoding
xfrm: join error paths
can: merge error paths
ax25: join the return paths that free skb
bt/rfcomm/tty: join error paths
irda: merge exit paths
nf/dccp: merge errorpaths
rpc/rdma: goto instead of copypaste
hp100: use roundup instead of open coding
ipmr: merge common code
libertas: use roundup instead of opencoding
Ingo Molnar (24):
netfilter: fix warning in net/netfilter/nf_conntrack_proto_tcp.c
netfilter: fix warning in net/netfilter/nf_conntrack_ftp.c
s2io: fix warning in drivers/net/s2io.c
niu: fix warnings in drivers/net/niu.c
niu: fix another warning in drivers/net/niu.c
qla3xxx: fix warning in drivers/net/qla3xxx.c
sunrpc: fix warning in net/sunrpc/xprtrdma/svc_rdma_transport.c
pkt_sched: fix warning in net/sched/sch_hfsc.c
ipv6: fix warning in net/ipv6/ip6_flowlabel.c
dsa: fix warning in net/dsa/mv88e6xxx.c
dsa: fix warning in net/dsa/mv88e6060.c
fix warning in fs/dlm/netlink.c
sis900: fix warning in drivers/net/sis900.c
z85230: fix warning in drivers/net/wan/z85230.c
mlx4: fix error path in drivers/net/mlx4/en_rx.c
cassini: fix warning in drivers/net/cassini.c
dccp: fix warning in net/dccp/options.c
mlx4: fix warning in drivers/net/mlx4/mcg.c
ax25: fix warning in net/ax25/sysctl_net_ax25.c
sunrpc: fix warning in net/sunrpc/xprtrdma/verbs.c
bluetooth: fix warning in net/bluetooth/rfcomm/sock.c
atlx: fix warning in drivers/net/atlx/atl2.c
depca: fix warning in drivers/net/depca.c
3c523: fix warning in drivers/net/3c523.c
Ivan Kuten (1):
mac80211: fix unaligned access in ieee80211_wep_encrypt_data
Ivo van Doorn (26):
rt2x00: Optimize configuration handling
rt2x00: Remove ieee80211_bss_conf from rt2x00_intf
rt2x00: Improve interface_modes initialization
rt2x00: Release rt2x00 2.2.2
rt2x00: Remove debugfs CSR access wrappers
rt2x00: Remove RATE_BASIC flag
rt2x00: Fix LED state handling
rt2x00: Block set_key() during suspend/shutdown
rt2x00: Fix BUG_ON() with antenna handling
rt2x00: Cleanup TX/RX entry handling
rt2x00: Optimize get_duration / get_duration_res
rt2x00: Fix race condition when using inderect registers
rt2x00: Cleanup indirect register access
rt2x00: Move rt73usb register access wrappers into rt2x00usb
rt2x00: Fix TX failure path
rt2x00: Detect USB BULK in/out endpoints
rt2x00: Don't switch off LED on initialization
rt2x00: Optimize IV/EIV handling
rt2x00: Store retry limit values
rt2x00: Remove duplicate code
rt2x00: Implement HW encryption (rt2500usb)
rt2x00: Release rt2x00 2.2.3
rt2x00: Add RXDONE_CRYPTO_IV/ICV flags
rt2x00: Fix check for BSS info changes
rt2x00: Move crypto TX descriptor handling to rt2x00crypto.c
rt2x00: Correctly initialize AID during set_key()
James Chapman (1):
l2tp: fix UDP checksum support
Jarek Poplawski (24):
pkt_sched: sch_generic: Add Qdisc_ops peek() method.
pkt_sched: sch_generic: Add generic qdisc->ops->peek() implementation.
pkt_sched: Add qdisc->ops->peek() implementation.
pkt_sched: Use qdisc->ops->peek() instead of ->dequeue() & ->requeue()
pkt_sched: Add peek emulation for non-work-conserving qdiscs.
sch_netem: Remove classful functionality
sch_netem: Replace ->requeue() method with open code
pkt_sched: sch_generic: Kfree gso_skb in qdisc_reset()
pkt_sched: Fix qdisc len in qdisc_peek_dequeued()
pkt_sched: Remove qdisc->ops->requeue() etc.
pkt_sched: sch_drr: Fix qlen in drr_drop()
net: gen_estimator: Fix gen_kill_estimator() lookups
pkt_sched: sch_api: Remove qdisc_list_lock
pkt_sched: gen_estimator: Optimize gen_estimator_active()
pkt_sched: sch_htb: Remove htb_class aprio field
pkt_sched: sch_htb: Remove htb_sched nwc_hit field
pkt_sched: sch_htb: Clean htb_class prio and quantum fields
pkt_sched: sch_htb: Remove L2T()
pkt_sched: sch_htb: Replace HTB_ACCNT() macro with inlines
pkt_sched: sch_htb: Optimize htb_find_next_upper()
pkt_sched: sch_htb: Optimize WARN_ONs in htb_dequeue_tree() etc.
pkt_sched: Annotate uninitialized var in sfq_enqueue()
net: Fix oops in dev_ifsioc()
pkt_sched: Remove smp_wmb() in qdisc_watchdog()
Jay Sternberg (3):
iwlwifi: define firmware file name once
iwlwifi: expand error lookup and align output
iwlwifi: indicate txpower is off in sysfs
Jay Vosburgh (3):
bonding, net: Move last_rx update into bonding recv logic
bonding: Fix ALB mode to balance traffic on VLANs
bonding: alternate agg selection policies for 802.3ad
Jeff Kirsher (6):
DCB: fix kconfig option
ixgbe: cleanup link up/down messages
e1000: cleanup link up/down messages
ixgb: cleanup link up/down messages
e100: cleanup link up/down messages
igb: fixup AER with proper error handling
Jesper Dangaard Brouer (3):
NIU: Implement discard counters
NIU: Implement discard counters, info/debug statements.
NIU: Implement discard counters, optimize
Jesse Brandeburg (3):
ixgbe: add device support for 82598AT (copper 10GbE) adapters
pktgen: add full reset functionality
ixgbe: fix dma mapping unbalance
Jianjun Kong (12):
af_unix: clean up net/unix/af_unix.c garbage.c sysctl_net_unix.c
net: clean up net/ipv4/ah4.c esp4.c fib_semantics.c inet_connection_sock.c inetpeer.c ip_output.c
net: clean up net/ipv4/ipip.c raw.c tcp.c tcp_minisocks.c tcp_yeah.c xfrm4_policy.c
net: clean up net/ipv4/fib_frontend.c fib_hash.c ip_gre.c
net: clean up net/ipv4/igmp.c
net: clean up net/ipv4/ip_sockglue.c tcp_output.c
net: clean up net/ipv4/ipmr.c
net: clean up net/ipv4/ip_fragment.c tcp_timer.c ip_input.c
net: clean up net/ipv4/pararp.c
net: clean up net/ipv4/devinet.c
net: clean up net/ipv4/tcp_ipv4.c
net: remove two duplicated #include
Jiri Slaby (1):
Ath5k: add AP mode
Jirka Pirko (3):
tokenring/3c359.c: fix allocation null check
tokenring/3c359.c: Fix error message when allocating tx_ring
tokenring/3c359.c: Prevent possible mem leak when open failed
Joe Chou (2):
r6040: fix wrong logic in mdio code
r6040: save and restore MIER correctly in the interrupt routine
Joe Korty (1):
forcdeth: increase max_interrupt_work
Joe Perches (3):
include/net net/ - csum_partial - remove unnecessary casts
drivers/s390/ - csum_partial - remove unnecessary casts
net/ipv6/ip6mr.c: Use kmem_cache_zalloc, remove memset
Johannes Berg (72):
mac80211: convert to %pM away from print_mac
net: convert print_mac to %pM
net: convert more to %pM
mac80211: remove aggregation status write support from debugfs
mac80211: remove writable debugs mesh parameters
mac80211: minor code cleanups
mac80211: remove wiphy_to_hw
mac80211: clean up ieee80211_hw_config errors
mac80211: remove max_antenna_gain config
mac80211: fix short slot handling
802.11: clean up/fix HT support
mac80211: kill hw.conf.antenna_sel_{rx,tx}
mac80211: introduce hw config change flags
mac80211: provide sequence numbers
nl80211: export HT capabilities
iwl3945: fix station stuff in RC algorithm
mac80211: make retry limits part of hw config
mac80211: move bss_conf into vif
mac80211: rewrite HT handling
p54/rtl8187: fix up the seqno patch
mac80211: add might_sleep to hw_config
mac80211/drivers: rewrite the rate control API
p54: implement MRR
make ieee80211 invisible
nl80211: fix monitor flags
mac80211: remove rate_control_clear
mac80211: inform userspace of probe/auth/assoc timeout
wireless: don't publish __regulatory_hint
wireless: remove cfg80211_reg_mutex
wireless: get rid of pointless request list
wireless: fix EU check
mac80211: insert AP sta entry after filling it
wireless: remove write-only 'granted' variable
wireless: make regdom passing semantics simpler
wireless: remove struct regdom hinting
wireless: clean up regulatory ignore_request function
wireless regulatory: move ignore_request
mac80211: fix two kernel-doc warnings
wireless: move mesh config length constant
wireless: fix a few sparse warnings
ath9k: remove useless NULL initialisers
iwl3945: remove dead code
iwlwifi: remove implicit direct scan
iwlwifi: remove unused essid variable
b43/legacy: remove SSID code
adm8211: remove SSID code
mac80211: remove SSID driver code
iwl3945: remove bogus comment
don't use net/ieee80211.h
wireless: implement basic rate helper function
b43: implement short slot and basic rate handling
libertas_tf: fix skb tail pointer
b43legacy: implement short slot and basic rate handling
b43: remove rate index warning
wireless: clean up sysfs code using %pM
ath5k: name pci driver "ath5k" too
mac80211: only transition STAs ps->wake on data frames
cfg80211: handle SIOCGIWNAME
cfg80211: handle SIOCGIWMODE/SIOCSIWMODE
wireless: clean up radiotap a bit
cfg80211: fix wiphy remove if no regulatory request
cfg80211: "fix" 11d oops
p54: fix lm87 checksum endianness
iwlwifi: disable AP mode
mac80211: improve sta_notify documentation
cfg80211: fix nl80211 frequency handling
mac80211: only create default STA interface if supported
ath9k: remove fragmentation workaround again
mac80211: remove fragmentation offload functionality
mac80211/cfg80211: check endianness in sparse runs
rfkill: strip pointless notifier chain
forcedeth: don't poll NV event 36
John Daiker (2):
ath5k: reduce checkpatch.pl errors
rt2x00: reduce checkpatch.pl errors
John W. Linville (21):
p54: integrate parts of lmac_longbow.h and other parts of stlc45xx
wireless: consolidate on a single escape_essid implementation
wireless: remove NETWORK_EMPTY_ESSID flag
wireless: escape_ssid should handle non-printables
wireless: use individual buffers for printing ssid values
wireless: avoid some net/ieee80211.h vs. linux/ieee80211.h conflicts
p54: eliminate warning for uninitialized variable 'tim_len'
ath9k: correct warning about unintialized variable 'tid'
netdevice zd1201: Convert directly reference of netdev->priv to netdev_priv()
ipw2100, ipw2200: select LIB80211
lib80211: absorb crypto bits from net/ieee80211
lib80211: consolidate crypt init routines
ipw2x00: relocate ipw2100/ipw2200 to common directory
net/ieee80211 -> drivers/net/ipw2x00/libipw_* rename
mac80211: add explicit padding in struct ieee80211_tx_info
rtl8180: adapt for deprecated IEEE80211_CONF_SHORT_SLOT_TIME flag
MAINTAINERS: claim maintenance over rtl818x drivers
mac80211_hwsim: fix-up some print_mac merge damage
hostap: select required crypto bits in Kconfig
mac80211: deauth when interface is marked down
ieee80211_security: correct warning about width of auth_mode
Jouni Malinen (25):
mac80211_hwsim: Debug info for BSS config changes
nl80211: Add basic rate configuration for AP mode
mac80211_hwsim: Debug info for TX queue parameters
nl80211: Add TX queue parameter configuration
mac80211_hwsim: Make sure beacon_timer gets deleted
mac80211: Allow AP mode to be enabled
mac80211_hwsim: Add support for client PS mode
mac80211_hwsim: Update documentation (AP mode enabled)
nl80211: Report max TX power in NL80211_BAND_ATTR_FREQS
nl80211: Change max TX power to be in mBm instead of dBm
nl80211: Add frequency configuration (including HT40)
ath9k: Free Beacon skbs in AP mode
ath9k: Disable staggered Beacon frame scheduling
mac80211: Disable requests for new scans in AP mode
ath9k: Do not remove header padding on RX from short frames
mac80211: Add HT rates into RX status reporting
ath9k: Report HT rates in RX status
mac80211: Send Layer 2 Update frame on reassociation
mac80211: Remove radiotap rate-present flag for HT
ath9k: Fix TX status reporting for retries and MCS index
ath9k: Remove MAC header pad before reporting TX status
ath9k: Fix a NULL pointer dereference in ath_rate_get
ath9k: Key cache allocation for AP mode
ath9k: Fix key cache slot selection for splitmic
ath9k: Fixed RX decryption status reporting
Julia Lawall (10):
drivers/net/wireless/ath9k/rc.c: use ARRAY_SIZE
Bluetooth: Change simple_strtol to simple_strtoul
drivers/isdn/mISDN: use ARRAY_SIZE
drivers/net/hamradio: Move a dereference below a NULL test
drivers/net/wan: Remove redundant test
drivers/net/au1000_eth.c: Remove redundant test
drivers/net/ehea: Remove redundant test
drivers/net: Remove redundant test
drivers/net/wan: Remove redundant test
net/appletalk: Remove redundant test
Julius Volz (3):
IPVS: Add IPv6 support to SH and DH schedulers
IPVS: Add IPv6 support to LBLC/LBLCR schedulers
IPVS: Remove supports_ipv6 scheduler flag
Kalle Valo (4):
mac80211: document ieee80211_tx_info.pad
mac80211: enable IEEE80211_CONF_PS only when associated
mac80211: track master queue status
mac80211: implement dynamic power save
Karen Xie (1):
cxgb3: manage private iSCSI IP address
Karsten Keil (1):
misdn: Fix lockdep warning
Kay Sievers (2):
net: struct device - replace bus_id with dev_name(), dev_set_name()
ssb: struct device - replace bus_id with dev_name(), dev_set_name()
Kolekar, Abhijeet (3):
iwl3945 : Fix Sparse Warnings
iwl3945 : Simplify iwl3945_send_beacon_cmd
iwl3945 : Simplify iwl3945_pci_probe
Komuro (1):
fmvj18x_cs: write interrupt ack bit for lan and modem to work simultaneously.
Krzysztof Halasa (1):
net: PHYLIB mdio fixes #2
Krzysztof Hałasa (28):
WAN: split hd6457x.c into hd64570.c and hd64572.c
WAN: remove SCA II support from SCA drivers
WAN: remove SCA support from SCA-II drivers
WAN: convert HD64572-based drivers to NAPI.
WAN: TX-done handler now uses the ownership bit in HD64572 drivers.
WAN: HD64572 already handles TX underruns with DMAC.
WAN: rework HD64572 interrupts a bit.
WAN: Simplify HD64572 status handling.
WAN: don't print HD64572 driver versions anymore.
WAN: Simplify HD64572 drivers.
WAN: HD64572 drivers don't use next_desc() anymore.
WAN: Correct comments in hd6457[02].c
WAN: Simplify sca_init_port() in HD64572 driver.
WAN: new synchronous PPP implementation for generic HDLC.
WAN: syncppp.c is no longer used by any kernel code. Remove it.
WAN pc300too.c: Fix PC300-X.21 detection
IXP4xx: check for queue being empty in qmgr_release_queue().
IXP4xx: clear IRQ stat in qmgr_disable_irq().
IXP4xx: Silence section mismatch warning in Ethernet driver.
IXP4xx: Make the Ethernet driver use built-in netdev stats.
IXP4xx: Add PHYLIB support to Ethernet driver.
IXP4xx: Add PHYLIB MII ioctl to the Ethernet driver.
IXP4xx: Add ethtool support to Ethernet driver.
WAN: Add IXP4xx HSS HDLC driver.
Update MAINTAINERS entries for IXP4xx and WAN network drivers.
IXP4xx: move common debugging from network drivers to QMGR module.
HDLC_PPP: Fix Configure-Ack to return original options as required by the standard.
Convert ixp4xx_eth driver to use net_device_ops.
Larry Finger (20):
p54: Move rx_mtu to struct bootrec_desc
hostap: Fix sparse warnings
rtl8187: Remove large delays
rtl8187: Remove OFDM delays
rtl8187: Remove CCK delays
rtl8187: Remove msleep calls after calls to rtl8225_write
rtl8187: Remove primitive write delays
rtl8187: Reduce channel switch delay
rtl8187: Change TX power settings
Move all rtl818x files to a common directory.
Update of MAINTAINERS for RTL8187
rtl8187: Update file authorship in comments
rtl8187: Remove module warning and dependence on CONFIG_EXPERIMENTAL
mac80211: Fix pid rate-setting algorithm to allow rate changes
rtl8187: Fix transmission count sent to mac80211
rtl8187: Improve wireless statistics for RTL8187
rtl8187: Use usb anchor facilities to manage urbs
b43legacy: Fix sparse warnings
rtl8187: Fix error returns
mac80211: Print unknown packet type in tasklet_handler
Lennert Buytenhek (6):
mv643xx_eth: checkpatch fixes
mv643xx_eth: introduce per-port register area pointer
mv643xx_eth: inline txq_alloc_desc_index()
mv643xx_eth: implement ->set_rx_mode()
mv643xx_eth: move receive error handling out of line
mv643xx_eth: calculate descriptor pointer only once in rxq_refill()
Luis R. Rodriguez (32):
ath5k/ath9k: correct signal quality
ath9k: correct signal quality report
ath5k: correct ath5k signal quality
mac80211: make use of regulatory tx power settings on change of tx power
ath9k: remove pointless sc_txintrperiod and spin_lock_bh on tx prepare
ath9k: enable RX interrupt mitigation
ath9k: Allow user to change tx power when asked
ath9k: use ETH_P_PAE
cfg80211: a reg rule is invalid if freq diff is 0
cfg80211: Add regulatory domain intersection capability
cfg80211: make use of reg macros on REG_RULE
cfg80211: Add kdoc for struct regulatory_request
ath5k: allow APs to receive beacons
ath9k: enable RXing of beacons on STA/IBSS
cfg80211: mark negative frequencies as invalid
cfg80211: remove switch from __regulatory_hint()
cfg80211: remove switch from __set_regdom()
cfg80211: separate intersection section in __set_regdom()
cfg80211: expect different rd in cfg80211 when intersecting
cfg80211: call_crda() won't tell us if CRDA was present
cfg80211: mark regdomains with > NL80211_MAX_SUPP_REG_RULES invalid
cfg80211/mac80211: Add 802.11d support
cfg80211: add support for custom firmware regulatory solutions
iwlwifi: enable custom fw regulatory solution
ath9k: Clarify we only want 32-bit DMA
ath9k: make DMA memory consistent
mac80211: don't assume driver has been attached on registration
mac80211: make Minstrel the default rate control algorithm
ath9k: Handle -ENOMEM on RX gracefully
nl80211: relicense nl80211.h under the ISC
ath9k: Check for pci_map_single() errors
ath9k: Use GFP_ATOMIC when allocating TX private area
Luotao Fu (1):
smc91x: remove isa stuff from smc91x driver
Marcel Holtmann (10):
Bluetooth: Add fine grained mem_flags usage to btusb driver
Bluetooth: Handle bulk URBs in btusb driver from notify callback
Bluetooth: Add suspend/resume support to btusb driver
Bluetooth: Fix warnings for bt_key_strings and bt_slock_key_strings
Bluetooth: Remove deprecated hci_usb driver
Bluetooth: Send HCI Reset command by default on device initialization
Bluetooth: Allow SCO audio with Asus WL-BTD202 dongle
Bluetooth: Enable per-module dynamic debug messages
Bluetooth: Fix format arguments warning
Bluetooth: Fix RFCOMM release oops when device is still in use
Mark McLoughlin (4):
virtio_net: Recycle some more rx buffer pages
virtio_net: hook up the set-tso ethtool op
virtio_net: VIRTIO_NET_F_MSG_RXBUF (imprive rcv buffer allocation)
virtio_net: large tx MTU support
Martin Willi (3):
xfrm: Notify changes in UDP encapsulation via netlink
xfrm: Accept XFRM_STATE_AF_UNSPEC SAs on IPv4/IPv6 only hosts
xfrm: Accept ESP packets regardless of UDP encapsulation mode
Matt Carlson (30):
tg3: Add 5761S support
tg3: Use pci_ioremap_bar()
tg3: Preserve DASH connectivity when WOL enabled
tg3: Preserve LAA when device control is released
tg3: Reclaim TG3_FLG3_5761_5784_AX_FIXES flag
tg3: Do not enable APE on bcm5700
tg3: Move phylib report to end of tg3_init_one
tg3: Refine power management and WOL code
tg3: Allow WOL for phylib controlled Broadcom phys
tg3: Refine phylib support
tg3: 5785 enhancements
broadcom: Add flow control support
broadcom: Refine expansion register access routine
broadcom: Add support for BCM50610
tg3: Update version to 3.95
tg3: Use NET_IP_ALIGN
tg3: Qualify use of tp->pcix_cap
tg3: Prevent corruption at 10 / 100Mbps w CLKREQ
tg3: Enable GPHY APD on select devices
tg3: Extract FW ver from alt NVRAM formats
tg3: Embrace pci_ioremap_bar()
tg3: Allow GPHY powerdown on 5761
tg3: Add 57780 support
broadcom: Add 57780 support
tg3: Update version to 3.96
tg3: WOL fixes
tg3: Cleanup IPV6 LSO
tg3: Remove unused cfgspc device members
tg3: tg3.h cleanups
tg3: Update version to 3.97
Matt Mackall (1):
tcp: Stop scaring users with "treason uncloaked!"
Michael Buesch (3):
b43: Fix some MAC locking
b43: Suspend MAC while killing the radio
b43: Add key memory dumping
Michael Chan (7):
bnx2: Add PCI ID for 5716S.
bnx2: Restrict WoL support.
bnx2: Set rx buffer water marks based on MTU.
bnx2: Reorganize timeout constants.
bnx2: Update version to 1.8.2.
bnx2: Rename MSI-X vectors.
bnx2: Update version to 1.9.0.
Mike Frysinger (2):
smc91x: add __init markings to smc_drv_probe()
netdev/smc91x: unify Blackfin code a bit and use proper read/write functions
Mohamed Abbas (6):
iwlwifi: clear scanning bits upon failure
iwlwifi: do not call statistics from rfkill
iwlagn: fix resume for ADHOC network
iwl3945: fix resume for ADHOC network
iwlwifi: fix resume while txpower off
iwlagn: fix agn rate scaling
Nathan Lynch (1):
ehea: use get_zeroed_page for alignment-sensitive allocation
Neil Horman (2):
net: implement emergency route cache rebulds when gc_elasticity is exceeded
net: Remove unused netdev arg from some NAPI interfaces.
Neil Turton (1):
sfc: Add option to use a separate channel for TX completions
Nick Andrew (2):
wireless: Fix incorrect use of loose in wext.c
net: Fix incorrect use of loose in spider_net.c
Nick Kossifidis (3):
ath5k: Update interrupt masking code
ath5k: Update PCU code
ath5k: Fix IMR init
Nick Pelly (1):
Bluetooth: Respect HCI_UART_DEBUG config in hci_ll.c
Nicolas Dichtel (1):
xfrm6: handling fragment
Oliver Hartkopp (2):
vcan: convert to net_device_ops
vcan: whitespace fixes
Oliver Neukum (2):
net: prepare usb net drivers for addition of status as a parameter
net: startup race in hso driver
PJ Waskiewicz (1):
ixgbe: Fix usage of netif_*_all_queues() with netif_carrier_{off|on}()
Pablo Neira Ayuso (7):
netfilter: ctnetlink: use nf_conntrack_get instead of atomic_inc
netfilter: ctnetlink: use EOPNOTSUPP instead of EINVAL if the conntrack has no helper
netfilter: ctnetlink: get rid of module refcounting in ctnetlink
netfilter: nf_conntrack: connection tracking helper name persistent aliases
netfilter: ctnetlink: helper modules load-on-demand support
netfilter: ctnetlink: deliver events for conntracks changed from userspace
filter: add SKF_AD_NLATTR_NEST to look for nested attributes
Patrick McHardy (12):
netlink: constify struct nlattr * arg to parsing functions
pkt_sched: Add ->peek() methods for fifo, prio and SFQ qdiscs.
netfilter: nfnetlink_log: fix warning and prototype mismatch
netfilter: nf_conntrack: fix warning and prototype mismatch
netlink: avoid memset of 0 bytes sparse warning
pkt_sched: add DRR scheduler
pkt_sched: remove unnecessary xchg() in packet schedulers
pkt_sched: remove unnecessary xchg() in packet classifiers
netfilter: nf_conntrack_proto_sctp: avoid bogus warning
netfilter: nf_conntrack_ftp: change "partial ..." message to pr_debug()
pkt_sched: sch_drr: fix drr_dequeue loop()
netlink: allow empty nested attributes
Paulius Zaleckas (2):
phylib: rename mdio-ofgpio to mdio-gpio
phylib: make mdio-gpio work without OF (v4)
Pavel Roskin (3):
p54: don't report known but unhandled EEPROM codes as unknown
orinoco: fix last beacon reporting on 64-bit systems
airport: remove useless return in a function returning void
Peter P Waskiewicz Jr (4):
ixgbe: Implement PCIe AER support
net: Init NAPI dev_list on napi_del
ixgbe: Fix NAPI enable/disable path when using DCB
ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
Petr Tesarik (1):
tcp: remove an unnecessary field in struct tcp_skb_cb
Qinghuang Feng (1):
net: remove redundant argument comments
Rafael J. Wysocki (2):
skge: adapt skge to use reworked PCI PM
e100: adapt to the reworked PCI PM
Rami Rosen (13):
mac80211: remove unused declaration of struct sta_attribute.
mac80211: use HWSIM_STA_MAGIC in hwsim_check_sta_magic() and hwsim_set_sta_magic().
mac80211: check return value of dev_alloc_skb() in ieee80211_sta_join_ibss().
mac80211: remove unnecessary include.
wireless: missing include in lib80211.h
mac80211: tx module cleanup.
iwlwifi: cleanup (remove pm_state)
iwlwifi: fix build error (iwl-rx.c).
mac80211: misc cleanups
iwlwifi: fix build warning (iwl-rx.c)
iwlwifi: remove a parameter (dest) from *_fill_beacon_frame() methods.
mac80211: fix a typo in ieee80211_send_assoc() method.
iwlwifi: iwl-tx.c cleanup (remove unused parameter and unused local variable).
Randy Dunlap (2):
mac80211: remove more excess kernel-doc
sctp: fix missing label when PROC_FS=n
Reinette Chatre (2):
iwlwifi: rely on API version read from firmware
mac80211: remove WARN_ON() from ieee80211_hw_config
Robert Olsson (2):
niu: Naming interrupt vectors.
ixgbe: Naming interrupt vectors
Roel Kluin (2):
net: Make static
qlge: ql_adapter_down() typo
Roland Dreier (1):
cxgb3: Fix sparse warning and micro-optimize is_pure_response()
Rémi Denis-Courmont (8):
Phonet: use net_device built-in stats for GPRS
Phonet: basic net namespace support
Phonet: improve GPRS variable names
Phonet: allocate a non-Ethernet ARP type
Phonet: allocate separate ARP type for GPRS over a Phonet pipe
Phonet: use atomic for packet TX window
Phonet: get rid of deferred work on the transmission path
Phonet: USB CDC Phonet function for gadget framework
Sakari Ailus (1):
tlan: Remove broken support for big buffers
Samuel Ortiz (1):
iwl3945: Select correct sta ID from find_station()
Sangtae Ha (1):
[TCP] CUBIC v2.3
Scott Feldman (5):
enic: enable ethtool LRO support
enic: driver/firmware API updates
enic: mask off some reserved bits in CQ descriptor for future use
enic: move wmb closer to where needed: before writing posted_index to hw
enic: misc cleanup items:
Senthil Balasubramanian (12):
ath9k: INI update for atheros chipets.
ath9k: incorrect noise floor threshold values.
ath9k: Build RFKILL feature even when RFKILL subsystem is a MODULE
ath9k: IRQ should be disabled before calling free_irq()
ath9k: Race condition in accessing TX and RX buffers.
wireless: Incorrect LEAP authentication algorithm identifier.
ath9k: Adding AR9285 chipset register information.
ath9k: Adding initvalues for Atheros AR9285 chipset.
ath9k: Adding support for Atheros AR9285 chipset.
ath9k: Incorrect band enum causes invalid antenna configuration.
ath9k: avoid rx frames with corrupted descriptor.
ath9k: BH shouldn't be enabled when hardirqs are disabled.
Simon Arlott (1):
netfilter: nf_nat: remove warn_if_extra_mangle
Stephen Hemminger (92):
vlan: propogate ethtool speed values
macvlan: add support for ethtool get settings
atlx: use embedded net_device_stats
atlx: timer cleanup
net: increase receive packet quantum
netem: eliminate unneeded return values
netdev: network device operations infrastructure
netdev: introduce dev_get_stats()
netdev: expose ethernet address primitives
netdev: convert loopback to net_device_ops
ifb: convert to net_device_ops
bridge: convert to net_device_ops
veth: convert to net_device_ops
macvlan: convert to net_device_ops
ip: convert to net_device_ops for ioctl
vlan: convert to net_device_ops
bonding: convert to net_device_ops
e1000e: convert to net_device_ops
sky2: convert to net_device_ops
skge: convert to net_device_ops
8139: convert to net_device_ops
tun: convert to net_device_ops
atl1e: convert to net_device_ops
atlx: convert to net_device_ops
cxgb3: convert to net_device_ops
cxgb2: convert to net_device_ops
e1000: convert to net_device_ops
via-velocity: convert to net_device_ops
igb: convert to net_device_ops
e100: convert to net_device_ops
ppp: convert to net_device_ops
enic: convert to net_device_ops
ixgb: convert to net_device_ops
tg3: convert to net_device_ops
forcedeth: convert to net_device_ops
niu: convert to net_device_ops
acenic: convert to net_device_ops
netdev: add more functions to netdevice ops
dummy: convert to net_device_ops
ipmr: convert ipmr virtual interface to net_device_ops
fddi: convert to new network device ops
defxx: convert driver to net_device_ops
hippi: convert driver to net_device_ops
ipip: convert to net_device_ops
ipv6: convert tunnels to net_device_ops
ipgre: convert to netdevice_ops
jme: convert driver to net_device_ops
s2io: convert to net_device_ops
qlge: convert to net_device_ops
qlge: fix sparse warnings
via-rhine: convert to net_device_ops
myri10ge: convert to net_device_ops
mlx4: convert to net_device_ops
bnx2: convert to net_device_ops
dl2k: convert to net_device_ops
netxen: convert to net_device_ops
sfc: convert to net_device_ops
tehuti: convert to net_device_ops
sis900: convert to net_device_ops
r6040: convert to net_device_ops
yellowfin: convert to net_device_ops
ns83820: convert to net_device_ops
bnx2x: convert to net_device_ops
hamachi: convert to net_device_ops
qla3xxx: convert to net_device_ops
sc92031: convert to net_device_ops
eql: convert to net_device_ops
ne2k: convert to net_device_ops
8139too: use err.h macros
netdev: add HAVE_NET_DEVICE_OPS
8390: add common net_device ops
wd: use net_device_ops
hp-plus: convert to net_device_ops
smc: convert to net_device_ops
ne3210: convert to net_device_ops
es3210: convert to net_device_ops
e2100: convert to net_device_ops
lne390: convert to net_device_ops
hp: convert to net_device_ops
ne2: convert to net_device_ops
apne: convert to net_device_ops
stnic: convert to net_device_ops
3c503: convert to net_device_ops
ne2000: convert to net_device_ops
tc: propogate errors from tcf_hash_create
tc: check for errors in gen_rate_estimator creation
tc: policing requires a rate estimator
etherh: build fix for net-next
mac8390: update to net_device_ops
zorro8390: convert to net_device_ops
hydra: convert to net_device_ops
ne-h8300: convert to net_device_ops
Steve Glendinning (15):
SMSC LAN911x and LAN921x vendor driver
smsc95xx: add tx checksum offload support
smsc911x: add dynamic bus configuration
smsc9420: SMSC LAN9420 10/100 PCI ethernet adapter
smsc911x: make smsc911x_poll_controller static
smsc9420: add netpoll support
smsc9420: add ethtool eeprom support
smsc9420: add ethtool register dump support
net: Move flow control definitions to mii.h
net: Refactor full duplex flow control resolution
smsc911x: fix BUG if module is removed while interface is up
smsc911x: convert driver to use net_device_ops
smsc911x: make smsc911x_ethtool_ops constant
smsc911x: don't clobber driver_data
smsc911x: fix platform resource call during module unload
Steve Hodgson (2):
sfc: Make reset_workqueue driver-global rather than per-NIC
sfc: Treat probe as unsuccessful if it scheduled a reset
Sujith (57):
mac80211: Change WARN_ON to WARN_ON_ONCE
ath9k: Check if the STA supports HT when initializing rate control
mac80211: Re-enable aggregation
ath9k: Node cleanup
ath9k: Simplify node attach/detach routines
ath9k: Revamp transmit control block
ath9k: Remove SM Power Save as it is not supported now
ath9k: Ensure ath_node is not NULL when updating tx chainmask
ath9k: Use bitfields to store tid's state in a single variable
ath9k: Revamp VAP management
ath9k: Refactor hw.c
ath9k: Remove unused function ath_get_currentCountry()
ath9k: Streamline attach/detach
ath9k: Remove unnecessary TSF reset
ath9k: Enable interrupts at the proper place
ath9k: Remove ath_tx_aggr_resp()
ath9k: Clear HT info on starting the driver
ath9k: Remove internal RX A-MPDU processing
mac80211: Add a new event in ieee80211_ampdu_mlme_action
ath9k: Fix compilation failure when RFKILL is enabled
mac80211: Use the HT capabilities from the IE instead of the station's caps.
ath9k: Merge struct ath_tx_ratectrl with ath_rate_node
ath9k: Simplify RC alloc/free functions
ath9k: Remove ath_setup_rates
ath9k: Remove ath_rate_newassoc()
ath9k: Remove half/quarter rate tables
ath9k: Nuke fixed rate handling in driver
ath9k: Revamp RX handling
ath9k: We don't support non-HT devices, so remove superfluous code.
ath9k: Remove rate control reference in VAP
ath9k: Remove ath_rate_softc
ath9k: Use rate_driver_data
ath9k: Remove ath9k_rate_table
ath9k: General code scrub
ath9k: Use helpers
ath9k: Move TX completion routine to xmit.c
ath9k: Fix bug in deciphering channel flags
ath9k: Update TX trigger level on a FIFO underrun.
ath9k: Use straightforward PCI routines to setup the TX buffer.
ath9k: Code scrub
ath9k: Use proper TX channel width for setting channels
ath9k: Handle channel initialization for AP mode
ath9k: Use cleaner debug masks
ath9k: Add ATH9K_DEBUG configuration option
ath9k: Remove includes that are not needed
ath9k: Add initial layout for an ath9k specific debugfs mechanism
ath9k: Add a debugfs file for dumping DMA status
ath9k: Choose correct ANI calibration period
ath9k: Fix bug in rate table management
ath9k: Maintain rate table choice after association
ath9k: Add a debugfs file to show interrupt statistics
ath9k: Remove remaining occurrences of CONFIG_SLOW_ANT_DIV
ath9k: Merge structures ath_atx, ath_node_aggr with ath_node
ath9k: Refactor struct ath_softc
mac80211: Fix HT channel selection
ath9k: Do not use association state to update rate table
ath9k: Protect config() callback with a mutex
Thomas Graf (1):
pkt_sched: Control group classifier
Tilman Schmidt (4):
gigaset: remove unnecessary poll method
gigaset: get rid of info() and warn() macros
gigaset: use pr_err() and pr_info()
gigaset: ifdef cleanup
Tim Gardner (1):
ipw2x00: change default policy for auto-associate
Tomas Winkler (34):
iwlwifi: make initial calibration set configurable
iwlwifi: take a valid antenna upon rate scale init
iwlwifi: refactor rxon time command
iwlwifi: remove host commands structures from iwl_cmd
iwlwifi: add iwl_cmd_queue_free for readability
iwlwifi: unify tx antenna toggling
iwlwifi: fix TX cmd dma unmapping
iwlwifi: tx command must run on same tfd as packet
iwlwifi: protect headers from double inclusion
iwlwifi: refactor TX response flow
iwlwifi: don't update TFD free counter for invalid station
iwlwifi: parametrize eeprom versions
iwlwifi: calibration command namespace renaming
iwlwifi: refactor tx byte count table usage
iwlwifi: run through spell checker
mac80211: fix basic rates setting from association response
iwlwifi: revamp tx scheduler byte count tables handling
iwlwifi: move spectrum measurement code to iwl-spectrum.c file
mac80211: rc80211_pid eliminate sparse warnings
iwlwifi: consolidate station management code
iwlwifi: rs: remove fc variable and other cleanups
iwlwifi: iwl-fh.h cleanup
iwlwifi: enable base band calibration in 5000 HW
Bluetooth: Fix TX error path in btsdio driver
mac80211: disassociate prior to unlinking AP/station
iwlwifi: properly initialize calibration command header
iwlwifi: 5150 add support for 5150
iwlwifi: 5150 enable DC calibration
iwlwifi: 5150 compute ct kill threshold
iwlwifi: 5150 parametrize eeprom versions
iwlwifi: remove unused clip_groups priv member
iwlwifi: remove includes of iwl-helpers.h where not needed
iwlwifi: remove 4965 from common uCode API structures
iwlwifi: add contact email to MODULE_AUTHOR
Vasanthakumar Thiagarajan (5):
ath9k: Configure AR_PHY_SWITCH_COM with apropriate antenna control
ath9k: Fix panic while unregistering rfkill
ath9k: Dont update rate control for every AMPDU
ath9k: Synchronize DMA transfer with CPU at right place
ath9k: Move rate control alg register/unregister to appropriate place
Vegard Nossum (2):
Bluetooth: Fix leak of uninitialized data to userspace
netlink: fix (theoretical) overrun in message iteration
Vivek Natarajan (1):
mac80211: Look out for some other AP when disassoc is received.
Wang Chen (37):
airo: Kill directly reference of netdev->priv
netdevice libertas: Fix directly reference of netdev->priv
netdevice: safe convert to netdev_priv() #part-1
netdevice: safe convert to netdev_priv() #part-2
netdevice: safe convert to netdev_priv() #part-3
netdevice: safe convert to netdev_priv() #part-4
netdevice chelsio: Convert directly reference of netdev->priv
netdevice: 82596: Convert netdev->priv to netdev_priv
netdevice hamradio: Convert directly reference of netdev->priv
netdevice lance: Convert directly reference of netdev->priv
netdevice ppp: Convert directly reference of netdev->priv
netdevice ni65: Convert directly reference of netdev->priv
netdevice wanrouter: Convert directly reference of netdev->priv
ixgbe: convert directly reference of netdev->priv
netdevice hdlc: Convert directly reference of netdev->priv
netdevice pc300: Convert directly reference of netdev->priv
netdevice pc300: Add the reason about PC300 BROKEN in Kconfig
netdevice sbni: Convert directly reference of netdev->priv
infiniband: Kill directly reference of netdev->priv
hysdn: Kill directly reference of netdev->priv
isdn: Kill directly reference of netdev->priv
dvb: Kill directly reference of netdev->priv
mptlan: Kill directly reference of netdev->priv
bond: Kill directly reference of netdev->priv
ixgbe: function comment typo
e1000: e1000_adapter->polling_netdev is useless
if_usb: Kill directly reference of netdev->priv
simeth: Kill directly reference of netdev->priv
xtensa: Kill directly reference of netdev->priv
um: Kill directly reference of netdev->priv
sgi-xp: Kill directly reference of netdev->priv
s390_net: Kill directly reference of netdev->priv
staging-p80211: Kill directly reference of netdev->priv
staging-slicoss: Kill directly reference of netdev->priv
staging-winbond: Kill directly reference of netdev->priv
netdevice: Kill netdev->priv
netdevice zd1201: Use after free
Wei Yongjun (6):
xfrm: Cleanup for unlink SPD entry
sctp: Bring SCTP_MAXSEG socket option into ietf API extension compliance
sctp: Fix a typo in socket.c
sctp: Implement socket option SCTP_GET_ASSOC_NUMBER
sctp: Avoid memory overflow while FWD-TSN chunk is received with bad stream ID
sctp: Add validity check for SCTP_PARTIAL_DELIVERY_POINT socket option
Winkler, Tomas (21):
iwlwifi: reorganize flow handler bitology
iwlwifi: trivial removal of some 4965 remaining from iwl-agn-rs.h
iwlwifi: iwl-agn-rs: initialize rs with valid antenna
iwlwifi: trivial fix in includes
iwlwifi: don't fail power set when calibration is not done yet
iwlwifi: move rx queue read pointer into rxq
iwlwifi: move iwl_print_hex_dump to iwl-debug.h
iwlwifi: get some more information about command failure
iwlwifi: move iwl_clear_stations_table to iwl-sta.c
iwlwifi: 4965 define firmware file name once
iwlwifi: TX setup fix confusion between TX queue and TX DMA channel
iwlwifi: TX update chicken bits
iwlwifi: 5150 enable LO, TXIQ and BB calibrations
iwlwifi: move host command check function into separate file
iwlwifi: move disable/enable interrupts to iwl-core.c
iwlwifi: move channels sysfs to debugfs
iwlwifi: change email contact information
iwlifi: remove twice defined SINGLE_FRAME RX FH MASK
iwlwifi: 3945 remove qos module parameter
iwlwifi: remove qos module parameter
iwlwifi: cleanup iwl-dev.h
Wu Fengguang (2):
generic swap(): ath9k: rename swap() to swap_array()
iwlwifi: remove useless goto
Wu, Fengguang (4):
iwlwifi: add line feed to printk
iwlwifi: update comments on the debug interface
iwlwifi: use type uint for module param debug
iwlwifi: use meaningful vars in _iwl_poll_bit()
Yang Hongyang (3):
ipv6: Add IPV6_PKTINFO sticky option support to setsockopt()
ipv6: fix the return interface index when get it while no message is received
ipv6: fix the outgoing interface selection order in udpv6_sendmsg()
Yevgeny Petrilin (5):
mlx4_en: Memory leak on completion queue free
mlx4_en: Removed TX locking when polling TX cq
mlx4_en: Removed redundant cq->armed flag
mlx4_en: Removed Interrupt moderation module parameters
mlx4_en: Remove pauses module parameters.
Zhaolei (2):
Fix debugfs_create_bool's error checking method for wireless/iwlwifi/
Fix debugfs_create_*'s error checking method for wireless/rt2x00/
Zhu Yi (4):
mac80211: print reason code for deauth/dissoc frames
iwlwifi: fix printk size format error
iwlwifi: fix DMA channel number in iwl_txq_ctx_stop
iwlwifi: use GFP_KERNEL to allocate Rx SKB memory
Zhu, Yi (9):
iwlwifi: fix priv->iw_mode setting when multiple vif are configured
iwlwifi: use Rx single frame mode (one Rx frame per RB)
iwlwifi: configure_filter rewrite
iwlwifi: some fh document fix and cleanup
iwlwifi: fix time interval misuse in iwl_poll_{direct_}bit
iwlwifi: fix "MAC in deep sleep" error
iwlwifi: iwl_poll_{direct_}bit cleanup
iwlwifi: use rmb/wmb to protect indirect mmio operation
iwlwifi: use iwl_poll_direct_bit in EEPROM reading
akeemting (1):
jme: GHC register control fix for new hardware
colin@cozybit.com (1):
Add nl80211 commands to get and set o11s mesh networking parameters
herton (1):
rtl8187: fix retry count passed in rtl8187_tx
Documentation/DocBook/Makefile | 2 +-
Documentation/DocBook/networking.tmpl | 3 -
Documentation/DocBook/wanbook.tmpl | 99 -
Documentation/RCU/rculist_nulls.txt | 167 +
Documentation/feature-removal-schedule.txt | 7 -
Documentation/networking/README.ipw2200 | 2 +-
Documentation/networking/bonding.txt | 68 +-
Documentation/networking/dccp.txt | 32 +-
Documentation/networking/driver.txt | 2 +-
Documentation/networking/generic-hdlc.txt | 8 +-
Documentation/networking/ip-sysctl.txt | 6 +
Documentation/networking/mac80211_hwsim/README | 9 +-
Documentation/networking/netdevices.txt | 2 +-
Documentation/networking/regulatory.txt | 22 +-
Documentation/powerpc/dts-bindings/fsl/tsec.txt | 12 +-
Documentation/rfkill.txt | 20 +-
MAINTAINERS | 48 +-
arch/arm/mach-ixp4xx/fsg-setup.c | 9 +-
arch/arm/mach-ixp4xx/include/mach/qmgr.h | 35 +-
arch/arm/mach-ixp4xx/ixp4xx_qmgr.c | 44 +-
arch/arm/mach-ixp4xx/nas100d-setup.c | 5 +-
arch/arm/mach-ixp4xx/nslu2-setup.c | 5 +-
arch/ia64/hp/sim/simeth.c | 25 +-
arch/powerpc/boot/dts/asp834x-redboot.dts | 20 +
arch/powerpc/boot/dts/ksi8560.dts | 20 +
arch/powerpc/boot/dts/mpc8313erdb.dts | 20 +
arch/powerpc/boot/dts/mpc8315erdb.dts | 19 +
arch/powerpc/boot/dts/mpc8349emitx.dts | 18 +
arch/powerpc/boot/dts/mpc8349emitxgp.dts | 5 +
arch/powerpc/boot/dts/mpc834x_mds.dts | 19 +
arch/powerpc/boot/dts/mpc8377_mds.dts | 19 +
arch/powerpc/boot/dts/mpc8377_rdb.dts | 19 +
arch/powerpc/boot/dts/mpc8378_mds.dts | 19 +
arch/powerpc/boot/dts/mpc8378_rdb.dts | 17 +
arch/powerpc/boot/dts/mpc8379_mds.dts | 18 +
arch/powerpc/boot/dts/mpc8379_rdb.dts | 18 +
arch/powerpc/boot/dts/mpc8536ds.dts | 18 +
arch/powerpc/boot/dts/mpc8540ads.dts | 31 +
arch/powerpc/boot/dts/mpc8541cds.dts | 18 +
arch/powerpc/boot/dts/mpc8544ds.dts | 20 +
arch/powerpc/boot/dts/mpc8548cds.dts | 44 +
arch/powerpc/boot/dts/mpc8555cds.dts | 18 +
arch/powerpc/boot/dts/mpc8560ads.dts | 18 +
arch/powerpc/boot/dts/mpc8568mds.dts | 18 +
arch/powerpc/boot/dts/mpc8572ds.dts | 45 +
arch/powerpc/boot/dts/mpc8641_hpcn.dts | 45 +
arch/powerpc/boot/dts/sbc8349.dts | 18 +
arch/powerpc/boot/dts/sbc8548.dts | 18 +
arch/powerpc/boot/dts/sbc8560.dts | 18 +
arch/powerpc/boot/dts/sbc8641d.dts | 44 +
arch/powerpc/boot/dts/stx_gp3_8560.dts | 18 +
arch/powerpc/boot/dts/tqm8540.dts | 28 +
arch/powerpc/boot/dts/tqm8541.dts | 18 +
arch/powerpc/boot/dts/tqm8548-bigflash.dts | 44 +
arch/powerpc/boot/dts/tqm8548.dts | 44 +
arch/powerpc/boot/dts/tqm8555.dts | 18 +
arch/powerpc/boot/dts/tqm8560.dts | 18 +
arch/powerpc/sysdev/fsl_soc.c | 241 +-
arch/s390/appldata/appldata_net_sum.c | 4 +-
arch/sparc64/kernel/idprom.c | 5 +-
arch/um/drivers/daemon_kern.c | 2 +-
arch/um/drivers/mcast_kern.c | 2 +-
arch/um/drivers/net_kern.c | 29 +-
arch/um/drivers/pcap_kern.c | 2 +-
arch/um/drivers/slip_kern.c | 2 +-
arch/um/drivers/slirp_kern.c | 2 +-
arch/um/drivers/vde_kern.c | 2 +-
arch/um/os-Linux/drivers/ethertap_kern.c | 2 +-
arch/um/os-Linux/drivers/tuntap_kern.c | 2 +-
arch/xtensa/platforms/iss/network.c | 21 +-
drivers/atm/Kconfig | 6 +
drivers/atm/Makefile | 1 +
drivers/atm/solos-pci.c | 790 ++
drivers/block/aoe/aoe.h | 1 -
drivers/block/aoe/aoeblk.c | 2 +-
drivers/block/aoe/aoecmd.c | 22 +-
drivers/block/aoe/aoenet.c | 11 -
drivers/bluetooth/Kconfig | 20 -
drivers/bluetooth/Makefile | 1 -
drivers/bluetooth/bcm203x.c | 9 +-
drivers/bluetooth/bfusb.c | 11 +-
drivers/bluetooth/bpa10x.c | 7 +-
drivers/bluetooth/bt3c_cs.c | 8 +-
drivers/bluetooth/btsdio.c | 6 +-
drivers/bluetooth/btusb.c | 229 +-
drivers/bluetooth/hci_bcsp.c | 5 -
drivers/bluetooth/hci_h4.c | 5 -
drivers/bluetooth/hci_ldisc.c | 9 +-
drivers/bluetooth/hci_usb.c | 1136 ---
drivers/bluetooth/hci_usb.h | 129 -
drivers/bluetooth/hci_vhci.c | 5 -
drivers/firmware/iscsi_ibft.c | 7 +-
drivers/infiniband/core/sysfs.c | 10 +-
drivers/infiniband/hw/amso1100/c2_provider.c | 8 +-
drivers/infiniband/hw/mthca/mthca_mcg.c | 23 +-
drivers/infiniband/hw/nes/nes.c | 17 +-
drivers/infiniband/hw/nes/nes_cm.c | 31 +-
drivers/infiniband/hw/nes/nes_hw.c | 2 +-
drivers/infiniband/hw/nes/nes_nic.c | 13 +-
drivers/infiniband/hw/nes/nes_utils.c | 5 +-
drivers/infiniband/ulp/ipoib/ipoib.h | 23 -
drivers/infiniband/ulp/ipoib/ipoib_cm.c | 8 +-
drivers/infiniband/ulp/ipoib/ipoib_ib.c | 6 +-
drivers/infiniband/ulp/ipoib/ipoib_main.c | 25 +-
drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 70 +-
drivers/infiniband/ulp/iser/iser_verbs.c | 8 +-
drivers/infiniband/ulp/srp/ib_srp.c | 31 +-
drivers/isdn/gigaset/asyncdata.c | 18 +-
drivers/isdn/gigaset/bas-gigaset.c | 13 +-
drivers/isdn/gigaset/common.c | 21 +-
drivers/isdn/gigaset/ev-layer.c | 42 +-
drivers/isdn/gigaset/gigaset.h | 20 +-
drivers/isdn/gigaset/i4l.c | 4 +-
drivers/isdn/gigaset/interface.c | 52 +-
drivers/isdn/gigaset/isocdata.c | 6 +-
drivers/isdn/gigaset/ser-gigaset.c | 32 +-
drivers/isdn/gigaset/usb-gigaset.c | 14 +-
drivers/isdn/hardware/eicon/di.c | 28 +-
drivers/isdn/hardware/eicon/message.c | 60 +-
drivers/isdn/hardware/mISDN/hfc_multi.h | 4 +-
drivers/isdn/hardware/mISDN/hfcmulti.c | 67 +-
drivers/isdn/hysdn/hysdn_net.c | 6 +-
drivers/isdn/i4l/isdn_concap.c | 4 +-
drivers/isdn/i4l/isdn_net.c | 224 +-
drivers/isdn/i4l/isdn_net.h | 50 +-
drivers/isdn/i4l/isdn_ppp.c | 32 +-
drivers/isdn/mISDN/core.c | 8 +-
drivers/isdn/mISDN/dsp_audio.c | 2 +-
drivers/isdn/mISDN/dsp_cmx.c | 8 +-
drivers/isdn/mISDN/dsp_core.c | 4 +-
drivers/isdn/mISDN/dsp_hwec.c | 2 +-
drivers/isdn/mISDN/dsp_pipeline.c | 2 +-
drivers/isdn/mISDN/dsp_tones.c | 92 +-
drivers/isdn/mISDN/l1oip_codec.c | 1 +
drivers/isdn/mISDN/l1oip_core.c | 22 +-
drivers/isdn/mISDN/layer1.c | 3 +-
drivers/isdn/mISDN/layer2.c | 16 +-
drivers/isdn/mISDN/socket.c | 2 +-
drivers/isdn/mISDN/stack.c | 2 +-
drivers/isdn/mISDN/tei.c | 4 +-
drivers/isdn/mISDN/timerdev.c | 9 +-
drivers/media/dvb/b2c2/flexcop.c | 2 +-
drivers/media/dvb/bt8xx/dst.c | 4 +-
drivers/media/dvb/dm1105/dm1105.c | 3 +-
drivers/media/dvb/dvb-core/dvb_net.c | 37 +-
drivers/media/dvb/dvb-usb/dvb-usb-dvb.c | 5 +-
drivers/media/dvb/pluto2/pluto2.c | 3 +-
drivers/message/fusion/mptlan.c | 22 +-
drivers/message/fusion/mptlan.h | 2 +-
drivers/misc/sgi-xp/xpnet.c | 13 +-
drivers/net/3c501.c | 3 +-
drivers/net/3c501.h | 2 +-
drivers/net/3c503.c | 21 +-
drivers/net/3c505.c | 51 +-
drivers/net/3c507.c | 15 +-
drivers/net/3c509.c | 6 +-
drivers/net/3c515.c | 13 +-
drivers/net/3c523.c | 46 +-
drivers/net/3c527.c | 4 +-
drivers/net/3c59x.c | 13 +-
drivers/net/7990.c | 1 -
drivers/net/8139cp.c | 47 +-
drivers/net/8139too.c | 57 +-
drivers/net/82596.c | 48 +-
drivers/net/8390.c | 50 +-
drivers/net/8390.h | 15 +
drivers/net/8390p.c | 50 +-
drivers/net/Kconfig | 64 +-
drivers/net/Makefile | 11 +-
drivers/net/a2065.c | 5 +-
drivers/net/ac3200.c | 5 +-
drivers/net/acenic.c | 37 +-
drivers/net/amd8111e.c | 12 +-
drivers/net/apne.c | 29 +-
drivers/net/appletalk/cops.c | 9 -
drivers/net/appletalk/ipddp.c | 6 +-
drivers/net/appletalk/ltpc.c | 13 +-
drivers/net/arcnet/arc-rawmode.c | 5 +-
drivers/net/arcnet/arc-rimi.c | 16 +-
drivers/net/arcnet/arcnet.c | 32 +-
drivers/net/arcnet/capmode.c | 9 +-
drivers/net/arcnet/com20020-isa.c | 4 +-
drivers/net/arcnet/com20020-pci.c | 2 +-
drivers/net/arcnet/com20020.c | 10 +-
drivers/net/arcnet/com90io.c | 4 +-
drivers/net/arcnet/com90xx.c | 12 +-
drivers/net/arcnet/rfc1051.c | 9 +-
drivers/net/arcnet/rfc1201.c | 14 +-
drivers/net/ariadne.c | 21 +-
drivers/net/arm/Kconfig | 10 +-
drivers/net/arm/Makefile | 3 +-
drivers/net/arm/am79c961a.c | 7 +-
drivers/net/arm/at91_ether.c | 11 +-
drivers/net/arm/ep93xx_eth.c | 8 +-
drivers/net/arm/ether1.c | 5 +-
drivers/net/arm/ether3.c | 5 +-
drivers/net/arm/etherh.c | 24 +-
drivers/net/arm/ixp4xx_eth.c | 344 +-
drivers/net/arm/ks8695net.c | 1676 ++++
drivers/net/arm/ks8695net.h | 107 +
drivers/net/at1700.c | 16 +-
drivers/net/atarilance.c | 52 +-
drivers/net/atl1e/atl1e_main.c | 47 +-
drivers/net/atlx/atl1.c | 102 +-
drivers/net/atlx/atl1.h | 4 +-
drivers/net/atlx/atl2.c | 101 +-
drivers/net/atlx/atl2.h | 1 -
drivers/net/atlx/atlx.c | 13 -
drivers/net/atp.c | 29 +-
drivers/net/au1000_eth.c | 50 +-
drivers/net/ax88796.c | 9 +-
drivers/net/b44.c | 13 +-
drivers/net/bfin_mac.c | 1 -
drivers/net/bmac.c | 7 +-
drivers/net/bnx2.c | 94 +-
drivers/net/bnx2.h | 42 +-
drivers/net/bnx2x_link.c | 72 +-
drivers/net/bnx2x_link.h | 10 +-
drivers/net/bnx2x_main.c | 95 +-
drivers/net/bonding/Makefile | 3 +
drivers/net/bonding/bond_3ad.c | 667 +-
drivers/net/bonding/bond_3ad.h | 59 +-
drivers/net/bonding/bond_alb.c | 37 +-
drivers/net/bonding/bond_ipv6.c | 216 +
drivers/net/bonding/bond_main.c | 477 +-
drivers/net/bonding/bond_sysfs.c | 160 +-
drivers/net/bonding/bonding.h | 68 +-
drivers/net/can/vcan.c | 24 +-
drivers/net/cassini.c | 16 +-
drivers/net/chelsio/cxgb2.c | 94 +-
drivers/net/chelsio/sge.c | 10 +-
drivers/net/cpmac.c | 15 +-
drivers/net/cris/eth_v10.c | 4 +-
drivers/net/cs89x0.c | 16 +-
drivers/net/cxgb3/adapter.h | 5 +-
drivers/net/cxgb3/common.h | 4 +-
drivers/net/cxgb3/cxgb3_ctl_defs.h | 17 +
drivers/net/cxgb3/cxgb3_main.c | 130 +-
drivers/net/cxgb3/cxgb3_offload.c | 76 +-
drivers/net/cxgb3/sge.c | 105 +-
drivers/net/cxgb3/t3_hw.c | 26 +-
drivers/net/cxgb3/version.h | 2 +-
drivers/net/cxgb3/vsc8211.c | 2 +
drivers/net/de600.c | 4 +-
drivers/net/de620.c | 26 +-
drivers/net/declance.c | 7 +-
drivers/net/defxx.c | 27 +-
drivers/net/depca.c | 54 +-
drivers/net/dl2k.c | 28 +-
drivers/net/dm9000.c | 40 +-
drivers/net/dummy.c | 15 +-
drivers/net/e100.c | 68 +-
drivers/net/e1000/e1000.h | 1 -
drivers/net/e1000/e1000_main.c | 107 +-
drivers/net/e1000e/82571.c | 19 +-
drivers/net/e1000e/defines.h | 8 +
drivers/net/e1000e/e1000.h | 2 +
drivers/net/e1000e/es2lan.c | 194 +-
drivers/net/e1000e/ethtool.c | 82 +-
drivers/net/e1000e/hw.h | 8 +-
drivers/net/e1000e/ich8lan.c | 151 +-
drivers/net/e1000e/lib.c | 80 +-
drivers/net/e1000e/netdev.c | 131 +-
drivers/net/e1000e/phy.c | 12 +-
drivers/net/e2100.c | 24 +-
drivers/net/eepro.c | 10 +-
drivers/net/eepro100.c | 2401 ------
drivers/net/eexpress.c | 3 +-
drivers/net/ehea/ehea.h | 2 +-
drivers/net/ehea/ehea_main.c | 7 +-
drivers/net/ehea/ehea_qmr.c | 18 +-
drivers/net/enc28j60.c | 49 +-
drivers/net/enic/cq_desc.h | 5 +-
drivers/net/enic/enic.h | 2 +-
drivers/net/enic/enic_main.c | 86 +-
drivers/net/enic/enic_res.c | 7 +-
drivers/net/enic/enic_res.h | 4 -
drivers/net/enic/vnic_dev.c | 70 +-
drivers/net/enic/vnic_devcmd.h | 19 +-
drivers/net/enic/vnic_intr.h | 2 +-
drivers/net/enic/vnic_resource.h | 2 +-
drivers/net/enic/vnic_rq.h | 9 +-
drivers/net/enic/vnic_rss.h | 13 +
drivers/net/enic/vnic_wq.h | 9 +-
drivers/net/epic100.c | 56 +-
drivers/net/eql.c | 12 +-
drivers/net/es3210.c | 34 +-
drivers/net/eth16i.c | 15 +-
drivers/net/ewrk3.c | 18 +-
drivers/net/fealnx.c | 6 +-
drivers/net/fec.c | 6 +-
drivers/net/fec_mpc52xx.c | 3 +-
drivers/net/forcedeth.c | 90 +-
drivers/net/fs_enet/fs_enet-main.c | 9 +-
drivers/net/gianfar.c | 861 ++-
drivers/net/gianfar.h | 78 +-
drivers/net/gianfar_ethtool.c | 89 +-
drivers/net/gianfar_mii.c | 212 +-
drivers/net/gianfar_mii.h | 2 +
drivers/net/hamachi.c | 27 +-
drivers/net/hamradio/6pack.c | 1 -
drivers/net/hamradio/baycom_epp.c | 1 -
drivers/net/hamradio/bpqether.c | 8 +-
drivers/net/hamradio/dmascc.c | 13 +-
drivers/net/hamradio/hdlcdrv.c | 1 -
drivers/net/hamradio/mkiss.c | 4 +-
drivers/net/hamradio/scc.c | 13 +-
drivers/net/hamradio/yam.c | 1 -
drivers/net/hp-plus.c | 27 +-
drivers/net/hp.c | 25 +-
drivers/net/hp100.c | 24 +-
drivers/net/hydra.c | 28 +-
drivers/net/ibm_newemac/core.c | 11 +-
drivers/net/ibmlana.c | 6 +-
drivers/net/ibmveth.c | 46 +-
drivers/net/ifb.c | 13 +-
drivers/net/igb/e1000_defines.h | 7 +-
drivers/net/igb/e1000_mac.c | 25 +-
drivers/net/igb/e1000_regs.h | 4 +
drivers/net/igb/igb.h | 44 +-
drivers/net/igb/igb_ethtool.c | 131 +-
drivers/net/igb/igb_main.c | 403 +-
drivers/net/ioc3-eth.c | 13 +-
drivers/net/ipg.c | 9 -
drivers/net/irda/ali-ircc.c | 17 +-
drivers/net/irda/au1k_ir.c | 1 -
drivers/net/irda/donauboe.c | 8 +-
drivers/net/irda/irda-usb.c | 15 +-
drivers/net/irda/irtty-sir.c | 7 +-
drivers/net/irda/kingsun-sir.c | 1 -
drivers/net/irda/ks959-sir.c | 1 -
drivers/net/irda/ksdazzle-sir.c | 1 -
drivers/net/irda/ma600-sir.c | 2 +-
drivers/net/irda/mcs7780.c | 1 -
drivers/net/irda/nsc-ircc.c | 17 +-
drivers/net/irda/pxaficp_ir.c | 4 -
drivers/net/irda/sa1100_ir.c | 28 +-
drivers/net/irda/sir_dev.c | 12 +-
drivers/net/irda/smsc-ircc2.c | 6 +-
drivers/net/irda/stir4200.c | 1 -
drivers/net/irda/via-ircc.c | 16 +-
drivers/net/irda/vlsi_ir.c | 37 +-
drivers/net/irda/w83977af_ir.c | 29 +-
drivers/net/isa-skeleton.c | 16 +-
drivers/net/iseries_veth.c | 14 +-
drivers/net/ixgb/ixgb_main.c | 58 +-
drivers/net/ixgbe/Makefile | 2 +
drivers/net/ixgbe/ixgbe.h | 32 +-
drivers/net/ixgbe/ixgbe_82598.c | 192 +-
drivers/net/ixgbe/ixgbe_dcb.c | 332 +
drivers/net/ixgbe/ixgbe_dcb.h | 184 +
drivers/net/ixgbe/ixgbe_dcb_82598.c | 398 +
drivers/net/ixgbe/ixgbe_dcb_82598.h | 94 +
drivers/net/ixgbe/ixgbe_dcb_nl.c | 641 ++
drivers/net/ixgbe/ixgbe_ethtool.c | 134 +-
drivers/net/ixgbe/ixgbe_main.c | 485 +-
drivers/net/ixgbe/ixgbe_phy.c | 326 +
drivers/net/ixgbe/ixgbe_phy.h | 25 +
drivers/net/ixgbe/ixgbe_type.h | 28 +-
drivers/net/ixp2000/ixpdev.c | 6 +-
drivers/net/jazzsonic.c | 4 +-
drivers/net/jme.c | 71 +-
drivers/net/jme.h | 34 +-
drivers/net/korina.c | 5 +-
drivers/net/lance.c | 32 +-
drivers/net/lib82596.c | 14 +-
drivers/net/lib8390.c | 20 +-
drivers/net/lne390.c | 29 +-
drivers/net/loopback.c | 29 +-
drivers/net/lp486e.c | 29 +-
drivers/net/mac8390.c | 22 +-
drivers/net/mac89x0.c | 16 +-
drivers/net/macb.c | 18 +-
drivers/net/mace.c | 34 +-
drivers/net/macmace.c | 6 +-
drivers/net/macsonic.c | 9 +-
drivers/net/macvlan.c | 49 +-
drivers/net/meth.c | 4 +-
drivers/net/mlx4/en_cq.c | 4 +-
drivers/net/mlx4/en_netdev.c | 48 +-
drivers/net/mlx4/en_params.c | 20 +-
drivers/net/mlx4/en_rx.c | 9 +-
drivers/net/mlx4/en_tx.c | 29 +-
drivers/net/mlx4/mcg.c | 25 +-
drivers/net/mlx4/mlx4_en.h | 12 +-
drivers/net/mv643xx_eth.c | 525 +-
drivers/net/mvme147.c | 9 +-
drivers/net/myri10ge/myri10ge.c | 71 +-
drivers/net/myri10ge/myri10ge_mcp.h | 175 +-
drivers/net/myri10ge/myri10ge_mcp_gen_header.h | 2 +
drivers/net/myri_sbus.c | 27 +-
drivers/net/natsemi.c | 12 +-
drivers/net/ne-h8300.c | 30 +-
drivers/net/ne.c | 29 +-
drivers/net/ne2.c | 29 +-
drivers/net/ne2k-pci.c | 28 +-
drivers/net/ne3210.c | 31 +-
drivers/net/netconsole.c | 9 +-
drivers/net/netx-eth.c | 1 -
drivers/net/netxen/netxen_nic_ethtool.c | 10 +-
drivers/net/netxen/netxen_nic_hw.c | 6 +-
drivers/net/netxen/netxen_nic_init.c | 2 -
drivers/net/netxen/netxen_nic_main.c | 57 +-
drivers/net/netxen/netxen_nic_niu.c | 7 +-
drivers/net/ni5010.c | 15 +-
drivers/net/ni52.c | 43 +-
drivers/net/ni65.c | 39 +-
drivers/net/niu.c | 145 +-
drivers/net/niu.h | 2 +-
drivers/net/ns83820.c | 28 +-
drivers/net/pasemi_mac.c | 14 +-
drivers/net/pasemi_mac_ethtool.c | 4 +-
drivers/net/pci-skeleton.c | 8 +-
drivers/net/pcmcia/3c574_cs.c | 6 +-
drivers/net/pcmcia/3c589_cs.c | 6 +-
drivers/net/pcmcia/axnet_cs.c | 22 +-
drivers/net/pcmcia/com20020_cs.c | 6 +-
drivers/net/pcmcia/fmvj18x_cs.c | 79 +-
drivers/net/pcmcia/nmclan_cs.c | 6 +-
drivers/net/pcmcia/pcnet_cs.c | 3 +-
drivers/net/pcmcia/smc91c92_cs.c | 5 +-
drivers/net/pcmcia/xirc2ps_cs.c | 6 +-
drivers/net/pcnet32.c | 10 +-
drivers/net/phy/Kconfig | 23 +-
drivers/net/phy/Makefile | 5 +-
drivers/net/phy/broadcom.c | 216 +-
drivers/net/phy/et1011c.c | 113 +
drivers/net/phy/mdio-gpio.c | 296 +
drivers/net/phy/mdio-ofgpio.c | 204 -
drivers/net/phy/mdio_bus.c | 40 +-
drivers/net/phy/national.c | 155 +
drivers/net/phy/phy.c | 2 +-
drivers/net/phy/phy_device.c | 54 +-
drivers/net/phy/smsc.c | 28 +
drivers/net/phy/ste10Xp.c | 137 +
drivers/net/plip.c | 35 +-
drivers/net/ppp_async.c | 6 -
drivers/net/ppp_generic.c | 206 +-
drivers/net/ppp_synctty.c | 6 -
drivers/net/pppoe.c | 5 +-
drivers/net/pppol2tp.c | 94 +-
drivers/net/ps3_gelic_net.c | 6 +-
drivers/net/ps3_gelic_wireless.c | 37 +-
drivers/net/ps3_gelic_wireless.h | 4 +-
drivers/net/qla3xxx.c | 42 +-
drivers/net/qlge/qlge_ethtool.c | 2 +-
drivers/net/qlge/qlge_main.c | 79 +-
drivers/net/qlge/qlge_mpi.c | 2 +-
drivers/net/r6040.c | 51 +-
drivers/net/r8169.c | 57 +-
drivers/net/rionet.c | 31 +-
drivers/net/rrunner.c | 25 +-
drivers/net/s2io.c | 146 +-
drivers/net/sb1000.c | 1 -
drivers/net/sb1250-mac.c | 11 +-
drivers/net/sc92031.c | 30 +-
drivers/net/seeq8005.c | 13 +-
drivers/net/sfc/Kconfig | 8 +
drivers/net/sfc/Makefile | 5 +-
drivers/net/sfc/boards.c | 206 +-
drivers/net/sfc/boards.h | 14 +-
drivers/net/sfc/efx.c | 449 +-
drivers/net/sfc/efx.h | 12 +-
drivers/net/sfc/enum.h | 36 +-
drivers/net/sfc/ethtool.c | 175 +-
drivers/net/sfc/falcon.c | 476 +-
drivers/net/sfc/falcon.h | 3 +
drivers/net/sfc/falcon_gmac.c | 229 +
drivers/net/sfc/falcon_hwdefs.h | 161 +-
drivers/net/sfc/falcon_xmac.c | 261 +-
drivers/net/sfc/gmii.h | 137 +-
drivers/net/sfc/mac.h | 16 +-
drivers/net/sfc/mdio_10g.c | 483 +-
drivers/net/sfc/mdio_10g.h | 63 +-
drivers/net/sfc/mtd.c | 268 +
drivers/net/sfc/net_driver.h | 131 +-
drivers/net/sfc/phy.h | 7 +-
drivers/net/sfc/rx.c | 2 +-
drivers/net/sfc/selftest.c | 145 +-
drivers/net/sfc/selftest.h | 14 +-
drivers/net/sfc/sfe4001.c | 225 +-
drivers/net/sfc/spi.h | 34 +-
drivers/net/sfc/tenxpress.c | 796 ++-
drivers/net/sfc/workarounds.h | 12 +-
drivers/net/sfc/xfp_phy.c | 29 +-
drivers/net/sgiseeq.c | 7 +-
drivers/net/sh_eth.c | 3 +-
drivers/net/sis190.c | 7 +-
drivers/net/sis900.c | 99 +-
drivers/net/skfp/skfddi.c | 27 +-
drivers/net/skge.c | 103 +-
drivers/net/sky2.c | 56 +-
drivers/net/slip.c | 12 +-
drivers/net/smc-mca.c | 27 +-
drivers/net/smc-ultra.c | 27 +-
drivers/net/smc-ultra32.c | 5 +-
drivers/net/smc911x.c | 16 +-
drivers/net/smc9194.c | 13 +-
drivers/net/smc91x.c | 42 +-
drivers/net/smc91x.h | 58 +-
drivers/net/smsc911x.c | 2071 +++++
drivers/net/smsc911x.h | 390 +
drivers/net/smsc9420.c | 1744 ++++
drivers/net/smsc9420.h | 275 +
drivers/net/sonic.c | 1 -
drivers/net/sonic.h | 20 +-
drivers/net/spider_net.c | 17 +-
drivers/net/spider_net_ethtool.c | 8 +-
drivers/net/starfire.c | 24 +-
drivers/net/stnic.c | 25 +-
drivers/net/sun3_82586.c | 40 +-
drivers/net/sun3lance.c | 10 +-
drivers/net/sunbmac.c | 22 +-
drivers/net/sundance.c | 6 +-
drivers/net/sungem.c | 65 +-
drivers/net/sunhme.c | 31 +-
drivers/net/sunlance.c | 7 +-
drivers/net/sunqe.c | 15 +-
drivers/net/sunvnet.c | 5 +-
drivers/net/tc35815.c | 49 +-
drivers/net/tehuti.c | 73 +-
drivers/net/tg3.c | 1068 ++-
drivers/net/tg3.h | 188 +-
drivers/net/tlan.c | 213 +-
drivers/net/tokenring/3c359.c | 13 +-
drivers/net/tokenring/Kconfig | 2 +-
drivers/net/tokenring/abyss.c | 4 +-
drivers/net/tokenring/ibmtr.c | 15 +-
drivers/net/tokenring/lanstreamer.c | 36 +-
drivers/net/tokenring/madgemc.c | 12 +-
drivers/net/tokenring/olympic.c | 52 +-
drivers/net/tokenring/proteon.c | 7 +-
drivers/net/tokenring/skisa.c | 7 +-
drivers/net/tokenring/smctr.c | 2 -
drivers/net/tokenring/tms380tr.c | 15 +-
drivers/net/tokenring/tmspci.c | 5 +-
drivers/net/tsi108_eth.c | 12 +-
drivers/net/tulip/de2104x.c | 54 +-
drivers/net/tulip/de4x5.c | 17 +-
drivers/net/tulip/dmfe.c | 7 +-
drivers/net/tulip/eeprom.c | 2 +-
drivers/net/tulip/interrupt.c | 10 +-
drivers/net/tulip/tulip_core.c | 15 +-
drivers/net/tulip/uli526x.c | 8 +-
drivers/net/tulip/winbond-840.c | 16 +-
drivers/net/tulip/xircom_cb.c | 4 +-
drivers/net/tun.c | 33 +-
drivers/net/typhoon.c | 15 +-
drivers/net/ucc_geth.c | 408 +-
drivers/net/ucc_geth.h | 1 +
drivers/net/usb/asix.c | 5 +-
drivers/net/usb/catc.c | 43 +-
drivers/net/usb/dm9601.c | 5 +-
drivers/net/usb/hso.c | 34 +-
drivers/net/usb/kaweth.c | 17 +-
drivers/net/usb/mcs7830.c | 9 +-
drivers/net/usb/pegasus.c | 74 +-
drivers/net/usb/rtl8150.c | 38 +-
drivers/net/usb/smsc95xx.c | 110 +-
drivers/net/usb/usbnet.c | 5 +-
drivers/net/veth.c | 30 +-
drivers/net/via-rhine.c | 47 +-
drivers/net/via-velocity.c | 28 +-
drivers/net/virtio_net.c | 217 +-
drivers/net/wan/Kconfig | 9 +
drivers/net/wan/Makefile | 3 +-
drivers/net/wan/c101.c | 6 +-
drivers/net/wan/cosa.c | 1 -
drivers/net/wan/cycx_x25.c | 91 +-
drivers/net/wan/dlci.c | 37 +-
drivers/net/wan/dscc4.c | 4 +-
drivers/net/wan/farsync.c | 2 -
drivers/net/wan/{hd6457x.c => hd64570.c} | 255 +-
drivers/net/wan/hd64572.c | 640 ++
drivers/net/wan/hdlc_fr.c | 10 +-
drivers/net/wan/hdlc_ppp.c | 649 ++-
drivers/net/wan/hostess_sv11.c | 1 -
drivers/net/wan/ixp4xx_hss.c | 1325 +++
drivers/net/wan/lapbether.c | 3 -
drivers/net/wan/lmc/lmc_main.c | 1 -
drivers/net/wan/lmc/lmc_proto.c | 1 -
drivers/net/wan/n2.c | 9 +-
drivers/net/wan/pc300_drv.c | 22 +-
drivers/net/wan/pc300too.c | 121 +-
drivers/net/wan/pci200syn.c | 79 +-
drivers/net/wan/sbni.c | 101 +-
drivers/net/wan/sdla.c | 48 +-
drivers/net/wan/sealevel.c | 1 -
drivers/net/wan/syncppp.c | 1480 ----
drivers/net/wan/wanxl.c | 9 +-
drivers/net/wan/x25_asy.c | 52 +-
drivers/net/wan/z85230.c | 12 +-
drivers/net/wd.c | 29 +-
drivers/net/wireless/Kconfig | 163 +-
drivers/net/wireless/Makefile | 22 +-
drivers/net/wireless/adm8211.c | 52 +-
drivers/net/wireless/adm8211.h | 2 -
drivers/net/wireless/airo.c | 243 +-
drivers/net/wireless/arlan-main.c | 27 +-
drivers/net/wireless/ath5k/ath5k.h | 102 +-
drivers/net/wireless/ath5k/attach.c | 14 +-
drivers/net/wireless/ath5k/base.c | 191 +-
drivers/net/wireless/ath5k/desc.c | 4 +-
drivers/net/wireless/ath5k/dma.c | 190 +-
drivers/net/wireless/ath5k/eeprom.c | 1194 +++-
drivers/net/wireless/ath5k/eeprom.h | 253 +-
drivers/net/wireless/ath5k/initvals.c | 8 +-
drivers/net/wireless/ath5k/pcu.c | 233 +-
drivers/net/wireless/ath5k/phy.c | 9 +-
drivers/net/wireless/ath5k/qcu.c | 37 +-
drivers/net/wireless/ath5k/reg.h | 16 +-
drivers/net/wireless/ath5k/reset.c | 9 +-
drivers/net/wireless/ath9k/Kconfig | 11 +
drivers/net/wireless/ath9k/Makefile | 9 +-
drivers/net/wireless/ath9k/ani.c | 852 ++
drivers/net/wireless/ath9k/ath9k.h | 432 +-
drivers/net/wireless/ath9k/beacon.c | 319 +-
drivers/net/wireless/ath9k/calib.c | 1021 +++
drivers/net/wireless/ath9k/core.c | 1886 -----
drivers/net/wireless/ath9k/core.h | 926 +--
drivers/net/wireless/ath9k/debug.c | 262 +
drivers/net/wireless/ath9k/eeprom.c | 2824 +++++++
drivers/net/wireless/ath9k/hw.c | 8490 +++++---------------
drivers/net/wireless/ath9k/hw.h | 165 +-
drivers/net/wireless/ath9k/initvals.h | 1938 +++++-
drivers/net/wireless/ath9k/mac.c | 946 +++
drivers/net/wireless/ath9k/main.c | 2353 ++++--
drivers/net/wireless/ath9k/phy.c | 24 +-
drivers/net/wireless/ath9k/phy.h | 5 +
drivers/net/wireless/ath9k/rc.c | 1832 ++---
drivers/net/wireless/ath9k/rc.h | 220 +-
drivers/net/wireless/ath9k/recv.c | 1242 +---
drivers/net/wireless/ath9k/reg.h | 109 +-
drivers/net/wireless/ath9k/regd.c | 85 +-
drivers/net/wireless/ath9k/regd.h | 2 +-
drivers/net/wireless/ath9k/xmit.c | 1532 ++--
drivers/net/wireless/atmel.c | 79 +-
drivers/net/wireless/b43/b43.h | 1 -
drivers/net/wireless/b43/debugfs.c | 1 +
drivers/net/wireless/b43/debugfs.h | 1 +
drivers/net/wireless/b43/dma.c | 4 +-
drivers/net/wireless/b43/main.c | 280 +-
drivers/net/wireless/b43/phy_a.c | 4 +-
drivers/net/wireless/b43/phy_common.c | 18 +
drivers/net/wireless/b43/phy_g.c | 28 +-
drivers/net/wireless/b43/pio.c | 3 +-
drivers/net/wireless/b43/xmit.c | 64 +-
drivers/net/wireless/b43/xmit.h | 5 +-
drivers/net/wireless/b43legacy/b43legacy.h | 5 +-
drivers/net/wireless/b43legacy/debugfs.c | 2 +-
drivers/net/wireless/b43legacy/dma.c | 48 +-
drivers/net/wireless/b43legacy/main.c | 211 +-
drivers/net/wireless/b43legacy/phy.c | 6 +-
drivers/net/wireless/b43legacy/pio.c | 31 +-
drivers/net/wireless/b43legacy/xmit.c | 26 +-
drivers/net/wireless/b43legacy/xmit.h | 2 +-
drivers/net/wireless/hostap/Kconfig | 13 +-
drivers/net/wireless/hostap/hostap.h | 2 +-
drivers/net/wireless/hostap/hostap_80211.h | 2 +-
drivers/net/wireless/hostap/hostap_80211_rx.c | 72 +-
drivers/net/wireless/hostap/hostap_80211_tx.c | 23 +-
drivers/net/wireless/hostap/hostap_ap.c | 253 +-
drivers/net/wireless/hostap/hostap_ap.h | 8 +-
drivers/net/wireless/hostap/hostap_common.h | 13 -
drivers/net/wireless/hostap/hostap_hw.c | 71 +-
drivers/net/wireless/hostap/hostap_info.c | 16 +-
drivers/net/wireless/hostap/hostap_ioctl.c | 157 +-
drivers/net/wireless/hostap/hostap_main.c | 45 +-
drivers/net/wireless/hostap/hostap_pci.c | 2 +-
drivers/net/wireless/hostap/hostap_proc.c | 35 +-
drivers/net/wireless/hostap/hostap_wlan.h | 8 +-
drivers/net/wireless/ipw2x00/Kconfig | 191 +
drivers/net/wireless/ipw2x00/Makefile | 14 +
drivers/net/wireless/{ => ipw2x00}/ipw2100.c | 71 +-
drivers/net/wireless/{ => ipw2x00}/ipw2100.h | 0
drivers/net/wireless/{ => ipw2x00}/ipw2200.c | 482 +-
drivers/net/wireless/{ => ipw2x00}/ipw2200.h | 2 +
.../net/wireless/ipw2x00/libipw_geo.c | 0
.../net/wireless/ipw2x00/libipw_module.c | 51 +-
.../net/wireless/ipw2x00/libipw_rx.c | 124 +-
.../net/wireless/ipw2x00/libipw_tx.c | 7 +-
.../net/wireless/ipw2x00/libipw_wx.c | 98 +-
drivers/net/wireless/iwlwifi/Kconfig | 2 +
drivers/net/wireless/iwlwifi/Makefile | 3 +-
drivers/net/wireless/iwlwifi/iwl-3945-commands.h | 148 +-
drivers/net/wireless/iwlwifi/iwl-3945-core.h | 28 +-
drivers/net/wireless/iwlwifi/iwl-3945-debug.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-3945-hw.h | 4 +-
drivers/net/wireless/iwlwifi/iwl-3945-io.h | 24 +-
drivers/net/wireless/iwlwifi/iwl-3945-led.c | 2 +-
drivers/net/wireless/iwlwifi/iwl-3945-led.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-3945-rs.c | 223 +-
drivers/net/wireless/iwlwifi/iwl-3945-rs.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-3945.c | 125 +-
drivers/net/wireless/iwlwifi/iwl-3945.h | 40 +-
drivers/net/wireless/iwlwifi/iwl-4965-hw.h | 203 +-
drivers/net/wireless/iwlwifi/iwl-4965.c | 251 +-
drivers/net/wireless/iwlwifi/iwl-5000-hw.h | 64 +-
drivers/net/wireless/iwlwifi/iwl-5000.c | 440 +-
drivers/net/wireless/iwlwifi/iwl-agn-hcmd-check.c | 108 +
drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 179 +-
drivers/net/wireless/iwlwifi/iwl-agn-rs.h | 22 +-
drivers/net/wireless/iwlwifi/iwl-agn.c | 1241 +--
drivers/net/wireless/iwlwifi/iwl-calib.c | 19 +-
drivers/net/wireless/iwlwifi/iwl-calib.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-commands.h | 536 +-
drivers/net/wireless/iwlwifi/iwl-core.c | 335 +-
drivers/net/wireless/iwlwifi/iwl-core.h | 78 +-
drivers/net/wireless/iwlwifi/iwl-csr.h | 8 +-
drivers/net/wireless/iwlwifi/iwl-debug.h | 33 +-
drivers/net/wireless/iwlwifi/iwl-debugfs.c | 83 +-
drivers/net/wireless/iwlwifi/iwl-dev.h | 183 +-
drivers/net/wireless/iwlwifi/iwl-eeprom.c | 50 +-
drivers/net/wireless/iwlwifi/iwl-eeprom.h | 15 +-
drivers/net/wireless/iwlwifi/iwl-fh.h | 173 +-
drivers/net/wireless/iwlwifi/iwl-hcmd.c | 4 +-
drivers/net/wireless/iwlwifi/iwl-helpers.h | 111 +-
drivers/net/wireless/iwlwifi/iwl-io.h | 37 +-
drivers/net/wireless/iwlwifi/iwl-led.c | 7 +-
drivers/net/wireless/iwlwifi/iwl-led.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-power.c | 38 +-
drivers/net/wireless/iwlwifi/iwl-power.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-prph.h | 8 +-
drivers/net/wireless/iwlwifi/iwl-rfkill.c | 12 +-
drivers/net/wireless/iwlwifi/iwl-rfkill.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-rx.c | 230 +-
drivers/net/wireless/iwlwifi/iwl-scan.c | 131 +-
drivers/net/wireless/iwlwifi/iwl-spectrum.c | 198 +
drivers/net/wireless/iwlwifi/iwl-spectrum.h | 3 +-
drivers/net/wireless/iwlwifi/iwl-sta.c | 259 +-
drivers/net/wireless/iwlwifi/iwl-sta.h | 16 +-
drivers/net/wireless/iwlwifi/iwl-tx.c | 438 +-
drivers/net/wireless/iwlwifi/iwl3945-base.c | 751 +-
drivers/net/wireless/libertas/assoc.c | 69 +-
drivers/net/wireless/libertas/cmd.c | 32 +-
drivers/net/wireless/libertas/cmd.h | 3 +-
drivers/net/wireless/libertas/debugfs.c | 11 +-
drivers/net/wireless/libertas/decl.h | 4 -
drivers/net/wireless/libertas/defs.h | 14 +-
drivers/net/wireless/libertas/dev.h | 7 +-
drivers/net/wireless/libertas/ethtool.c | 14 +-
drivers/net/wireless/libertas/host.h | 9 +
drivers/net/wireless/libertas/hostcmd.h | 26 +-
drivers/net/wireless/libertas/if_sdio.c | 3 +-
drivers/net/wireless/libertas/if_usb.c | 7 +-
drivers/net/wireless/libertas/main.c | 135 +-
drivers/net/wireless/libertas/persistcfg.c | 18 +-
drivers/net/wireless/libertas/radiotap.h | 3 -
drivers/net/wireless/libertas/scan.c | 105 +-
drivers/net/wireless/libertas/scan.h | 4 +
drivers/net/wireless/libertas/tx.c | 2 +-
drivers/net/wireless/libertas/types.h | 5 +-
drivers/net/wireless/libertas/wext.c | 80 +-
drivers/net/wireless/libertas_tf/cmd.c | 5 +-
drivers/net/wireless/libertas_tf/main.c | 8 +-
drivers/net/wireless/mac80211_hwsim.c | 294 +-
drivers/net/wireless/netwave_cs.c | 6 +-
drivers/net/wireless/orinoco/Makefile | 12 +
drivers/net/wireless/{ => orinoco}/airport.c | 2 +-
drivers/net/wireless/{ => orinoco}/hermes.c | 0
drivers/net/wireless/{ => orinoco}/hermes.h | 0
drivers/net/wireless/{ => orinoco}/hermes_dld.c | 0
drivers/net/wireless/{ => orinoco}/hermes_dld.h | 0
drivers/net/wireless/{ => orinoco}/hermes_rid.h | 0
drivers/net/wireless/{ => orinoco}/orinoco.c | 231 +-
drivers/net/wireless/{ => orinoco}/orinoco.h | 9 +
drivers/net/wireless/{ => orinoco}/orinoco_cs.c | 10 +-
.../net/wireless/{ => orinoco}/orinoco_nortel.c | 0
drivers/net/wireless/{ => orinoco}/orinoco_pci.c | 0
drivers/net/wireless/{ => orinoco}/orinoco_pci.h | 0
drivers/net/wireless/{ => orinoco}/orinoco_plx.c | 0
drivers/net/wireless/{ => orinoco}/orinoco_tmd.c | 0
drivers/net/wireless/{ => orinoco}/spectrum_cs.c | 31 +-
drivers/net/wireless/p54/p54.h | 74 +-
drivers/net/wireless/p54/p54common.c | 1620 +++-
drivers/net/wireless/p54/p54common.h | 349 +-
drivers/net/wireless/p54/p54pci.c | 70 +-
drivers/net/wireless/p54/p54pci.h | 2 +-
drivers/net/wireless/p54/p54usb.c | 261 +-
drivers/net/wireless/p54/p54usb.h | 1 +
drivers/net/wireless/prism54/isl_ioctl.c | 24 +-
drivers/net/wireless/prism54/islpci_hotplug.c | 8 +-
drivers/net/wireless/ray_cs.c | 12 +-
drivers/net/wireless/rndis_wlan.c | 95 +-
drivers/net/wireless/rt2x00/Kconfig | 1 +
drivers/net/wireless/rt2x00/rt2400pci.c | 373 +-
drivers/net/wireless/rt2x00/rt2400pci.h | 2 +
drivers/net/wireless/rt2x00/rt2500pci.c | 407 +-
drivers/net/wireless/rt2x00/rt2500pci.h | 2 +
drivers/net/wireless/rt2x00/rt2500usb.c | 443 +-
drivers/net/wireless/rt2x00/rt2500usb.h | 5 +
drivers/net/wireless/rt2x00/rt2x00.h | 113 +-
drivers/net/wireless/rt2x00/rt2x00config.c | 202 +-
drivers/net/wireless/rt2x00/rt2x00crypto.c | 79 +-
drivers/net/wireless/rt2x00/rt2x00debug.c | 47 +-
drivers/net/wireless/rt2x00/rt2x00debug.h | 13 +
drivers/net/wireless/rt2x00/rt2x00dev.c | 86 +-
drivers/net/wireless/rt2x00/rt2x00leds.c | 88 +-
drivers/net/wireless/rt2x00/rt2x00lib.h | 33 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 56 +-
drivers/net/wireless/rt2x00/rt2x00pci.c | 41 +-
drivers/net/wireless/rt2x00/rt2x00pci.h | 37 +-
drivers/net/wireless/rt2x00/rt2x00queue.c | 94 +-
drivers/net/wireless/rt2x00/rt2x00queue.h | 47 +-
drivers/net/wireless/rt2x00/rt2x00usb.c | 145 +-
drivers/net/wireless/rt2x00/rt2x00usb.h | 141 +-
drivers/net/wireless/rt2x00/rt61pci.c | 469 +-
drivers/net/wireless/rt2x00/rt61pci.h | 2 +
drivers/net/wireless/rt2x00/rt73usb.c | 689 +-
drivers/net/wireless/rt2x00/rt73usb.h | 2 +
drivers/net/wireless/rtl818x/Makefile | 7 +
drivers/net/wireless/{ => rtl818x}/rtl8180.h | 0
drivers/net/wireless/{ => rtl818x}/rtl8180_dev.c | 48 +-
.../net/wireless/{ => rtl818x}/rtl8180_grf5101.c | 0
.../net/wireless/{ => rtl818x}/rtl8180_grf5101.h | 0
.../net/wireless/{ => rtl818x}/rtl8180_max2820.c | 0
.../net/wireless/{ => rtl818x}/rtl8180_max2820.h | 0
.../net/wireless/{ => rtl818x}/rtl8180_rtl8225.c | 14 +-
.../net/wireless/{ => rtl818x}/rtl8180_rtl8225.h | 0
.../net/wireless/{ => rtl818x}/rtl8180_sa2400.c | 0
.../net/wireless/{ => rtl818x}/rtl8180_sa2400.h | 0
drivers/net/wireless/{ => rtl818x}/rtl8187.h | 8 +-
drivers/net/wireless/{ => rtl818x}/rtl8187_dev.c | 459 +-
.../net/wireless/{ => rtl818x}/rtl8187_rtl8225.c | 397 +-
.../net/wireless/{ => rtl818x}/rtl8187_rtl8225.h | 0
drivers/net/wireless/{ => rtl818x}/rtl818x.h | 1 +
drivers/net/wireless/strip.c | 22 +-
drivers/net/wireless/wavelan.c | 122 +-
drivers/net/wireless/wavelan_cs.c | 39 +-
drivers/net/wireless/wl3501.h | 4 +-
drivers/net/wireless/wl3501_cs.c | 11 +-
drivers/net/wireless/zd1201.c | 131 +-
drivers/net/wireless/zd1211rw/zd_chip.c | 4 +-
drivers/net/wireless/zd1211rw/zd_mac.c | 44 +-
drivers/net/wireless/zd1211rw/zd_usb.c | 2 +-
drivers/net/xen-netfront.c | 9 +-
drivers/net/xtsonic.c | 6 +-
drivers/net/yellowfin.c | 42 +-
drivers/net/znet.c | 28 +-
drivers/net/zorro8390.c | 29 +-
drivers/parisc/led.c | 4 +-
drivers/s390/net/lcs.c | 12 +-
drivers/s390/net/qeth_core_offl.c | 8 +-
drivers/s390/net/qeth_l2_main.c | 18 +-
drivers/scsi/iscsi_tcp.c | 4 +-
drivers/scsi/qla4xxx/ql4_os.c | 3 +-
drivers/ssb/main.c | 11 +-
drivers/ssb/pcihost_wrapper.c | 2 +-
drivers/staging/slicoss/slicoss.c | 7 +-
drivers/staging/winbond/linux/wbusb.c | 6 +-
drivers/staging/wlan-ng/p80211netdev.c | 20 +-
drivers/staging/wlan-ng/p80211wext.c | 58 +-
drivers/usb/atm/cxacru.c | 4 +-
drivers/usb/atm/usbatm.c | 5 +-
drivers/usb/gadget/f_phonet.c | 621 ++
drivers/usb/gadget/u_ether.c | 10 +-
drivers/usb/gadget/u_phonet.h | 21 +
drivers/uwb/wlp/eda.c | 38 +-
firmware/Makefile | 3 +
firmware/WHENCE | 11 +
firmware/cxgb3/t3b_psram-1.1.0.bin.ihex | 162 +
firmware/cxgb3/t3c_psram-1.1.0.bin.ihex | 162 +
firmware/cxgb3/t3fw-7.0.0.bin.ihex | 1881 +++++
fs/afs/proc.c | 4 +-
fs/afs/server.c | 9 +-
fs/cifs/cifs_spnego.c | 6 +-
fs/cifs/connect.c | 4 +-
fs/dlm/netlink.c | 2 +-
fs/lockd/host.c | 8 +-
fs/lockd/mon.c | 2 +-
fs/nfs/nfsroot.c | 6 +-
fs/nfs/super.c | 6 +-
fs/nfsd/nfs4state.c | 4 +-
fs/nfsd/nfsctl.c | 2 +-
fs/ocfs2/cluster/netdebug.c | 8 +-
fs/ocfs2/cluster/nodemanager.c | 2 +-
fs/ocfs2/cluster/tcp.c | 29 +-
include/linux/atm.h | 17 +-
include/linux/atmdev.h | 15 +
include/linux/cgroup_subsys.h | 6 +
include/linux/dcbnl.h | 340 +
include/linux/dccp.h | 42 +-
include/linux/etherdevice.h | 46 +
include/linux/ethtool.h | 2 +
include/linux/fddidevice.h | 1 +
include/linux/filter.h | 3 +-
include/linux/fsl_devices.h | 18 +-
include/linux/hdlc.h | 4 +-
include/linux/hippidevice.h | 4 +-
include/linux/ieee80211.h | 212 +-
include/linux/if.h | 1 +
include/linux/if_arp.h | 3 +
include/linux/in.h | 4 +
include/linux/ipv6.h | 1 +
include/linux/kernel.h | 12 -
include/linux/list_nulls.h | 94 +
include/linux/mdio-gpio.h | 25 +
include/linux/mii.h | 33 +
include/linux/mroute6.h | 26 +-
include/linux/netdevice.h | 400 +-
include/linux/netfilter_bridge/ebtables.h | 3 +-
include/linux/netfilter_ipv4/ipt_policy.h | 2 +
include/linux/netfilter_ipv6/ip6t_policy.h | 2 +
include/linux/netlink.h | 3 +-
include/linux/netpoll.h | 5 -
include/linux/nl80211.h | 223 +-
include/linux/phy.h | 2 +
include/linux/pkt_cls.h | 14 +
include/linux/pkt_sched.h | 16 +
include/linux/rculist_nulls.h | 110 +
include/linux/rfkill.h | 8 +-
include/linux/rtnetlink.h | 5 +
include/linux/skbuff.h | 54 +-
include/linux/smsc911x.h | 47 +
include/linux/snmp.h | 3 +
include/linux/sunrpc/svc_xprt.h | 8 +-
include/linux/virtio_net.h | 9 +
include/linux/xfrm.h | 14 +
include/net/bluetooth/bluetooth.h | 4 +-
include/net/bluetooth/hci.h | 2 +-
include/net/cfg80211.h | 142 +-
include/net/checksum.h | 2 +-
include/net/dcbnl.h | 53 +
include/net/dn.h | 8 +-
include/net/dn_fib.h | 6 +-
include/net/dst.h | 39 +-
include/net/flow.h | 9 +-
include/net/gen_stats.h | 3 +-
include/net/ieee80211.h | 148 +-
include/net/ieee80211_radiotap.h | 15 +-
include/net/inet_hashtables.h | 85 +-
include/net/inet_timewait_sock.h | 10 +-
include/net/ip.h | 3 +-
include/net/ip_vs.h | 17 +-
include/net/{ieee80211_crypt.h => lib80211.h} | 75 +-
include/net/mac80211.h | 446 +-
include/net/ndisc.h | 14 +
include/net/neighbour.h | 15 +-
include/net/net_namespace.h | 22 +
include/net/netfilter/nf_conntrack.h | 5 +-
include/net/netfilter/nf_conntrack_ecache.h | 57 +-
include/net/netfilter/nf_conntrack_expect.h | 2 +
include/net/netfilter/nf_conntrack_helper.h | 5 +-
include/net/netfilter/nf_conntrack_l4proto.h | 2 +-
include/net/netfilter/nf_conntrack_tuple.h | 12 +-
include/net/netfilter/nfnetlink_log.h | 14 +
include/net/netlink.h | 24 +-
include/net/netns/ipv4.h | 2 +
include/net/netns/ipv6.h | 12 +
include/net/netns/mib.h | 3 +
include/net/netns/x_tables.h | 5 +
include/net/netns/xfrm.h | 56 +
include/net/phonet/pep.h | 2 +-
include/net/phonet/phonet.h | 2 +-
include/net/phonet/pn_dev.h | 2 +-
include/net/pkt_cls.h | 2 +-
include/net/protocol.h | 3 +
include/net/sch_generic.h | 38 +-
include/net/sctp/sctp.h | 9 +-
include/net/sctp/user.h | 2 +
include/net/sock.h | 86 +-
include/net/syncppp.h | 102 -
include/net/tcp.h | 20 +-
include/net/udp.h | 25 +-
include/net/udplite.h | 2 +-
include/net/wireless.h | 90 +-
include/net/xfrm.h | 110 +-
lib/vsprintf.c | 77 +
net/802/fddi.c | 8 +-
net/802/hippi.c | 14 +-
net/802/tr.c | 24 +-
net/8021q/vlan.c | 26 +-
net/8021q/vlan.h | 6 +-
net/8021q/vlan_core.c | 2 -
net/8021q/vlan_dev.c | 76 +-
net/9p/trans_rdma.c | 2 -
net/Kconfig | 7 +-
net/Makefile | 4 +-
net/appletalk/aarp.c | 3 +-
net/appletalk/ddp.c | 5 +-
net/appletalk/sysctl_net_atalk.c | 14 +-
net/atm/atm_sysfs.c | 2 +-
net/atm/br2684.c | 7 +-
net/atm/clip.c | 4 +-
net/atm/common.h | 1 +
net/atm/ioctl.c | 49 +-
net/atm/lec.c | 60 +-
net/atm/mpc.c | 40 +-
net/atm/mpoa_caches.c | 18 +-
net/atm/pvc.c | 3 +
net/atm/resources.c | 88 +-
net/atm/resources.h | 2 +-
net/atm/svc.c | 19 +
net/ax25/ax25_in.c | 41 +-
net/ax25/sysctl_net_ax25.c | 58 +-
net/bluetooth/af_bluetooth.c | 50 +-
net/bluetooth/bnep/bnep.h | 2 +-
net/bluetooth/bnep/core.c | 8 +-
net/bluetooth/bnep/netdev.c | 11 +-
net/bluetooth/bnep/sock.c | 5 -
net/bluetooth/cmtp/capi.c | 5 -
net/bluetooth/cmtp/core.c | 5 -
net/bluetooth/cmtp/sock.c | 5 -
net/bluetooth/hci_conn.c | 5 -
net/bluetooth/hci_core.c | 11 +-
net/bluetooth/hci_event.c | 5 -
net/bluetooth/hci_sock.c | 5 -
net/bluetooth/hci_sysfs.c | 12 +-
net/bluetooth/hidp/core.c | 5 -
net/bluetooth/hidp/sock.c | 5 -
net/bluetooth/l2cap.c | 5 -
net/bluetooth/rfcomm/core.c | 5 -
net/bluetooth/rfcomm/sock.c | 9 +-
net/bluetooth/rfcomm/tty.c | 48 +-
net/bluetooth/sco.c | 5 -
net/bridge/br_device.c | 20 +-
net/bridge/br_if.c | 4 +-
net/bridge/br_netfilter.c | 13 +-
net/bridge/br_sysfs_br.c | 2 +-
net/bridge/netfilter/ebt_log.c | 18 +-
net/bridge/netfilter/ebtable_broute.c | 26 +-
net/bridge/netfilter/ebtable_filter.c | 41 +-
net/bridge/netfilter/ebtable_nat.c | 38 +-
net/bridge/netfilter/ebtables.c | 52 +-
net/can/raw.c | 22 +-
net/core/datagram.c | 5 +-
net/core/dev.c | 458 +-
net/core/dst.c | 6 +-
net/core/ethtool.c | 53 +-
net/core/fib_rules.c | 7 +-
net/core/filter.c | 19 +
net/core/flow.c | 6 +-
net/core/gen_estimator.c | 97 +-
net/core/neighbour.c | 73 +-
net/core/net-sysfs.c | 15 +-
net/core/net_namespace.c | 2 -
net/core/netpoll.c | 20 +-
net/core/pktgen.c | 42 +-
net/core/rtnetlink.c | 15 +-
net/core/skbuff.c | 277 +-
net/core/sock.c | 46 +-
net/core/sysctl_net_core.c | 68 +-
net/dcb/Kconfig | 22 +
net/dcb/Makefile | 1 +
net/dcb/dcbnl.c | 1122 +++
net/dccp/ackvec.c | 9 +-
net/dccp/ackvec.h | 5 +-
net/dccp/ccid.c | 62 +-
net/dccp/ccid.h | 26 +-
net/dccp/ccids/ccid2.c | 6 +-
net/dccp/dccp.h | 17 +-
net/dccp/diag.c | 11 +-
net/dccp/feat.c | 1458 +++-
net/dccp/feat.h | 130 +-
net/dccp/input.c | 44 +-
net/dccp/ipv4.c | 13 +-
net/dccp/ipv6.c | 15 +-
net/dccp/minisocks.c | 54 +-
net/dccp/options.c | 229 +-
net/dccp/output.c | 19 +-
net/dccp/probe.c | 19 +-
net/dccp/proto.c | 224 +-
net/dccp/sysctl.c | 21 -
net/dccp/timer.c | 12 -
net/decnet/af_decnet.c | 62 +-
net/decnet/dn_dev.c | 22 +-
net/decnet/dn_neigh.c | 18 +-
net/decnet/dn_nsp_in.c | 28 +-
net/decnet/dn_nsp_out.c | 23 +-
net/decnet/dn_route.c | 29 +-
net/decnet/dn_table.c | 2 +-
net/decnet/sysctl_net_decnet.c | 48 +-
net/dsa/mv88e6060.c | 6 +-
net/dsa/mv88e6123_61_65.c | 4 +-
net/dsa/mv88e6131.c | 4 +-
net/dsa/mv88e6xxx.c | 2 +-
net/dsa/slave.c | 2 +-
net/dsa/tag_dsa.c | 1 -
net/dsa/tag_edsa.c | 1 -
net/dsa/tag_trailer.c | 1 -
net/ethernet/eth.c | 19 +-
net/ieee80211/Kconfig | 73 -
net/ieee80211/Makefile | 12 -
net/ieee80211/ieee80211_crypt.c | 206 -
net/ipv4/af_inet.c | 116 +-
net/ipv4/ah4.c | 10 +-
net/ipv4/arp.c | 36 +-
net/ipv4/cipso_ipv4.c | 1 -
net/ipv4/devinet.c | 19 +-
net/ipv4/esp4.c | 8 +-
net/ipv4/fib_frontend.c | 10 +-
net/ipv4/fib_hash.c | 12 +-
net/ipv4/fib_semantics.c | 8 +-
net/ipv4/fib_trie.c | 6 +-
net/ipv4/icmp.c | 39 +-
net/ipv4/igmp.c | 95 +-
net/ipv4/inet_connection_sock.c | 31 +-
net/ipv4/inet_diag.c | 31 +-
net/ipv4/inet_hashtables.c | 277 +-
net/ipv4/inet_lro.c | 4 +-
net/ipv4/inet_timewait_sock.c | 48 +-
net/ipv4/inetpeer.c | 2 +-
net/ipv4/ip_forward.c | 2 +-
net/ipv4/ip_fragment.c | 21 +-
net/ipv4/ip_gre.c | 58 +-
net/ipv4/ip_input.c | 10 +-
net/ipv4/ip_output.c | 24 +-
net/ipv4/ip_sockglue.c | 72 +-
net/ipv4/ipcomp.c | 10 +-
net/ipv4/ipconfig.c | 40 +-
net/ipv4/ipip.c | 37 +-
net/ipv4/ipmr.c | 280 +-
net/ipv4/netfilter.c | 7 +-
net/ipv4/netfilter/arp_tables.c | 16 +-
net/ipv4/netfilter/arptable_filter.c | 12 +-
net/ipv4/netfilter/ip_tables.c | 12 +-
net/ipv4/netfilter/ipt_CLUSTERIP.c | 9 +-
net/ipv4/netfilter/ipt_LOG.c | 7 +-
net/ipv4/netfilter/ipt_addrtype.c | 16 +-
net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c | 27 +-
net/ipv4/netfilter/nf_conntrack_proto_icmp.c | 4 +-
net/ipv4/netfilter/nf_nat_h323.c | 58 +-
net/ipv4/netfilter/nf_nat_irc.c | 4 +-
net/ipv4/netfilter/nf_nat_rule.c | 27 +-
net/ipv4/netfilter/nf_nat_sip.c | 18 +-
net/ipv4/netfilter/nf_nat_snmp_basic.c | 9 +-
net/ipv4/proc.c | 8 +-
net/ipv4/raw.c | 10 +-
net/ipv4/route.c | 227 +-
net/ipv4/sysctl_net_ipv4.c | 188 +-
net/ipv4/tcp.c | 130 +-
net/ipv4/tcp_cubic.c | 120 +-
net/ipv4/tcp_diag.c | 2 +-
net/ipv4/tcp_input.c | 511 +-
net/ipv4/tcp_ipv4.c | 137 +-
net/ipv4/tcp_minisocks.c | 2 +-
net/ipv4/tcp_output.c | 219 +-
net/ipv4/tcp_probe.c | 7 +-
net/ipv4/tcp_timer.c | 14 +-
net/ipv4/tcp_yeah.c | 4 +-
net/ipv4/udp.c | 271 +-
net/ipv4/udp_impl.h | 4 +-
net/ipv4/udplite.c | 14 +-
net/ipv4/xfrm4_input.c | 4 +-
net/ipv4/xfrm4_policy.c | 15 +-
net/ipv4/xfrm4_state.c | 2 -
net/ipv6/addrconf.c | 80 +-
net/ipv6/addrlabel.c | 34 +-
net/ipv6/af_inet6.c | 2 +-
net/ipv6/ah6.c | 9 +-
net/ipv6/anycast.c | 6 +-
net/ipv6/datagram.c | 3 +-
net/ipv6/esp6.c | 7 +-
net/ipv6/exthdrs.c | 2 +-
net/ipv6/icmp.c | 21 +-
net/ipv6/inet6_connection_sock.c | 2 +-
net/ipv6/inet6_hashtables.c | 182 +-
net/ipv6/ip6_flowlabel.c | 6 +-
net/ipv6/ip6_output.c | 5 +-
net/ipv6/ip6_tunnel.c | 37 +-
net/ipv6/ip6mr.c | 490 +-
net/ipv6/ipcomp6.c | 10 +-
net/ipv6/ipv6_sockglue.c | 34 +-
net/ipv6/mcast.c | 41 +-
net/ipv6/mip6.c | 3 +-
net/ipv6/ndisc.c | 105 +-
net/ipv6/netfilter.c | 7 +-
net/ipv6/netfilter/ip6t_LOG.c | 7 +-
net/ipv6/netfilter/ip6t_REJECT.c | 2 +-
net/ipv6/netfilter/ip6table_filter.c | 17 +-
net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c | 5 +-
net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c | 2 +-
net/ipv6/netfilter/nf_conntrack_reasm.c | 6 +-
net/ipv6/raw.c | 3 +-
net/ipv6/reassembly.c | 12 +-
net/ipv6/route.c | 47 +-
net/ipv6/sit.c | 35 +-
net/ipv6/syncookies.c | 2 +-
net/ipv6/sysctl_net_ipv6.c | 4 +-
net/ipv6/tcp_ipv6.c | 28 +-
net/ipv6/udp.c | 151 +-
net/ipv6/udp_impl.h | 4 +-
net/ipv6/udplite.c | 9 +-
net/ipv6/xfrm6_input.c | 9 +-
net/ipv6/xfrm6_policy.c | 22 +-
net/ipv6/xfrm6_state.c | 2 -
net/ipv6/xfrm6_tunnel.c | 33 +-
net/ipx/sysctl_net_ipx.c | 2 +-
net/irda/irlan/irlan_client.c | 4 +-
net/irda/irlan/irlan_common.c | 2 +-
net/irda/irlap_frame.c | 17 +-
net/irda/irsysctl.c | 50 +-
net/irda/irttp.c | 14 +-
net/irda/timer.c | 2 +-
net/key/af_key.c | 217 +-
net/llc/af_llc.c | 1 -
net/llc/llc_proc.c | 3 +-
net/llc/sysctl_net_llc.c | 20 +-
net/mac80211/Kconfig | 8 +-
net/mac80211/Makefile | 2 +
net/mac80211/cfg.c | 194 +-
net/mac80211/debugfs.c | 12 +-
net/mac80211/debugfs_key.c | 4 +-
net/mac80211/debugfs_netdev.c | 117 +-
net/mac80211/debugfs_sta.c | 84 +-
net/mac80211/event.c | 5 +-
net/mac80211/ht.c | 265 +-
net/mac80211/ieee80211_i.h | 90 +-
net/mac80211/iface.c | 54 +-
net/mac80211/key.c | 10 +-
net/mac80211/main.c | 284 +-
net/mac80211/mesh.c | 4 +-
net/mac80211/mesh.h | 5 +-
net/mac80211/mesh_hwmp.c | 7 +-
net/mac80211/mesh_plink.c | 49 +-
net/mac80211/mlme.c | 606 +-
net/mac80211/rate.c | 52 +-
net/mac80211/rate.h | 11 +-
net/mac80211/rc80211_minstrel.c | 109 +-
net/mac80211/rc80211_minstrel.h | 2 +
net/mac80211/rc80211_pid.h | 3 +-
net/mac80211/rc80211_pid_algo.c | 38 +-
net/mac80211/rc80211_pid_debugfs.c | 5 +-
net/mac80211/rx.c | 174 +-
net/mac80211/scan.c | 24 +-
net/mac80211/sta_info.c | 37 +-
net/mac80211/sta_info.h | 45 +-
net/mac80211/tkip.c | 10 +-
net/mac80211/tx.c | 462 +-
net/mac80211/util.c | 107 +-
net/mac80211/wep.c | 33 +-
net/mac80211/wep.h | 2 +-
net/mac80211/wext.c | 257 +-
net/mac80211/wme.c | 32 +-
net/mac80211/wpa.c | 32 +-
net/netfilter/Kconfig | 5 +-
net/netfilter/ipvs/ip_vs_conn.c | 20 +-
net/netfilter/ipvs/ip_vs_core.c | 20 +-
net/netfilter/ipvs/ip_vs_ctl.c | 82 +-
net/netfilter/ipvs/ip_vs_dh.c | 34 +-
net/netfilter/ipvs/ip_vs_ftp.c | 13 +-
net/netfilter/ipvs/ip_vs_lblc.c | 69 +-
net/netfilter/ipvs/ip_vs_lblcr.c | 96 +-
net/netfilter/ipvs/ip_vs_lc.c | 3 -
net/netfilter/ipvs/ip_vs_nq.c | 3 -
net/netfilter/ipvs/ip_vs_proto.c | 38 +-
net/netfilter/ipvs/ip_vs_proto_ah_esp.c | 10 +-
net/netfilter/ipvs/ip_vs_proto_tcp.c | 8 +-
net/netfilter/ipvs/ip_vs_proto_udp.c | 8 +-
net/netfilter/ipvs/ip_vs_rr.c | 3 -
net/netfilter/ipvs/ip_vs_sed.c | 3 -
net/netfilter/ipvs/ip_vs_sh.c | 34 +-
net/netfilter/ipvs/ip_vs_sync.c | 4 +-
net/netfilter/ipvs/ip_vs_wlc.c | 3 -
net/netfilter/ipvs/ip_vs_wrr.c | 3 -
net/netfilter/ipvs/ip_vs_xmit.c | 34 +-
net/netfilter/nf_conntrack_acct.c | 2 +-
net/netfilter/nf_conntrack_amanda.c | 1 +
net/netfilter/nf_conntrack_core.c | 61 +-
net/netfilter/nf_conntrack_ecache.c | 14 +-
net/netfilter/nf_conntrack_expect.c | 43 +-
net/netfilter/nf_conntrack_ftp.c | 24 +-
net/netfilter/nf_conntrack_h323_main.c | 13 +-
net/netfilter/nf_conntrack_helper.c | 32 +-
net/netfilter/nf_conntrack_irc.c | 14 +-
net/netfilter/nf_conntrack_netbios_ns.c | 1 +
net/netfilter/nf_conntrack_netlink.c | 201 +-
net/netfilter/nf_conntrack_pptp.c | 1 +
net/netfilter/nf_conntrack_proto_generic.c | 4 +-
net/netfilter/nf_conntrack_proto_gre.c | 2 +-
net/netfilter/nf_conntrack_proto_sctp.c | 30 +-
net/netfilter/nf_conntrack_proto_tcp.c | 50 +-
net/netfilter/nf_conntrack_proto_udp.c | 8 +-
net/netfilter/nf_conntrack_proto_udplite.c | 4 +-
net/netfilter/nf_conntrack_sane.c | 1 +
net/netfilter/nf_conntrack_sip.c | 1 +
net/netfilter/nf_conntrack_standalone.c | 16 +-
net/netfilter/nf_conntrack_tftp.c | 1 +
net/netfilter/nfnetlink_log.c | 4 +-
net/netfilter/xt_NFLOG.c | 5 +-
net/netfilter/xt_dccp.c | 16 +-
net/netfilter/xt_hashlimit.c | 14 +-
net/netfilter/xt_iprange.c | 36 +-
net/netfilter/xt_recent.c | 32 +-
net/netlabel/netlabel_addrlist.c | 4 +-
net/netlabel/netlabel_mgmt.c | 1 -
net/netlink/af_netlink.c | 7 +
net/netlink/attr.c | 8 +-
net/netrom/sysctl_net_netrom.c | 48 +-
net/packet/af_packet.c | 2 +
net/phonet/af_phonet.c | 8 +-
net/phonet/pep-gprs.c | 218 +-
net/phonet/pep.c | 38 +-
net/phonet/pn_dev.c | 6 +-
net/phonet/socket.c | 13 +-
net/phonet/sysctl.c | 4 +-
net/rfkill/rfkill-input.c | 337 +-
net/rfkill/rfkill-input.h | 3 +
net/rfkill/rfkill.c | 183 +-
net/rose/sysctl_net_rose.c | 40 +-
net/rxrpc/af_rxrpc.c | 4 +-
net/rxrpc/ar-connection.c | 2 +-
net/rxrpc/ar-connevent.c | 2 +-
net/rxrpc/ar-error.c | 3 +-
net/rxrpc/ar-local.c | 16 +-
net/rxrpc/ar-peer.c | 8 +-
net/rxrpc/ar-proc.c | 16 +-
net/rxrpc/ar-security.c | 2 +-
net/rxrpc/ar-transport.c | 12 +-
net/rxrpc/rxkad.c | 2 +-
net/sched/Kconfig | 22 +
net/sched/Makefile | 2 +
net/sched/act_api.c | 18 +-
net/sched/act_gact.c | 4 +-
net/sched/act_ipt.c | 4 +-
net/sched/act_mirred.c | 4 +-
net/sched/act_nat.c | 4 +-
net/sched/act_pedit.c | 4 +-
net/sched/act_police.c | 33 +-
net/sched/act_simple.c | 4 +-
net/sched/act_skbedit.c | 4 +-
net/sched/cls_api.c | 3 +-
net/sched/cls_basic.c | 2 +-
net/sched/cls_cgroup.c | 288 +
net/sched/cls_fw.c | 2 +-
net/sched/cls_route.c | 2 +-
net/sched/cls_tcindex.c | 6 -
net/sched/cls_u32.c | 11 +-
net/sched/ematch.c | 18 +-
net/sched/sch_api.c | 50 +-
net/sched/sch_atm.c | 36 +-
net/sched/sch_blackhole.c | 1 +
net/sched/sch_cbq.c | 76 +-
net/sched/sch_drr.c | 519 ++
net/sched/sch_dsmark.c | 22 +-
net/sched/sch_fifo.c | 4 +-
net/sched/sch_generic.c | 40 +-
net/sched/sch_gred.c | 22 +-
net/sched/sch_hfsc.c | 64 +-
net/sched/sch_htb.c | 171 +-
net/sched/sch_multiq.c | 82 +-
net/sched/sch_netem.c | 160 +-
net/sched/sch_prio.c | 50 +-
net/sched/sch_red.c | 33 +-
net/sched/sch_sfq.c | 71 +-
net/sched/sch_tbf.c | 44 +-
net/sched/sch_teql.c | 19 +-
net/sctp/ipv6.c | 35 +-
net/sctp/protocol.c | 29 +-
net/sctp/sm_statefuns.c | 24 +-
net/sctp/socket.c | 206 +-
net/sctp/sysctl.c | 82 +-
net/socket.c | 1 -
net/sunrpc/clnt.c | 8 +-
net/sunrpc/rpcb_clnt.c | 17 +-
net/sunrpc/svcauth_unix.c | 24 +-
net/sunrpc/svcsock.c | 6 +-
net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 4 +-
net/sunrpc/xprtrdma/svc_rdma_sendto.c | 2 +-
net/sunrpc/xprtrdma/svc_rdma_transport.c | 16 +-
net/sunrpc/xprtrdma/transport.c | 14 +-
net/sunrpc/xprtrdma/verbs.c | 16 +-
net/sunrpc/xprtsock.c | 41 +-
net/tipc/eth_media.c | 3 +-
net/tipc/name_table.c | 2 +-
net/unix/af_unix.c | 200 +-
net/unix/garbage.c | 12 +-
net/unix/sysctl_net_unix.c | 3 +-
net/wanrouter/wanmain.c | 36 +-
net/wireless/Kconfig | 30 +
net/wireless/Makefile | 7 +
net/wireless/core.c | 14 +-
net/wireless/core.h | 13 +
net/wireless/lib80211.c | 284 +
.../lib80211_crypt_ccmp.c} | 129 +-
.../lib80211_crypt_tkip.c} | 181 +-
.../lib80211_crypt_wep.c} | 79 +-
net/wireless/nl80211.c | 417 +-
net/wireless/reg.c | 1005 ++-
net/wireless/reg.h | 33 +-
net/wireless/sysfs.c | 25 +-
net/wireless/util.c | 19 +
net/wireless/wext-compat.c | 139 +
net/wireless/wext.c | 2 +-
net/x25/sysctl_net_x25.c | 22 +-
net/xfrm/Makefile | 4 +-
net/xfrm/xfrm_input.c | 25 +-
net/xfrm/xfrm_output.c | 18 +-
net/xfrm/xfrm_policy.c | 511 +-
net/xfrm/xfrm_proc.c | 26 +-
net/xfrm/xfrm_state.c | 407 +-
net/xfrm/xfrm_sysctl.c | 85 +
net/xfrm/xfrm_user.c | 249 +-
security/selinux/avc.c | 4 +-
security/selinux/hooks.c | 4 +-
1395 files changed, 73267 insertions(+), 48032 deletions(-)
delete mode 100644 Documentation/DocBook/wanbook.tmpl
create mode 100644 Documentation/RCU/rculist_nulls.txt
create mode 100644 drivers/atm/solos-pci.c
delete mode 100644 drivers/bluetooth/hci_usb.c
delete mode 100644 drivers/bluetooth/hci_usb.h
create mode 100644 drivers/net/arm/ks8695net.c
create mode 100644 drivers/net/arm/ks8695net.h
create mode 100644 drivers/net/bonding/bond_ipv6.c
delete mode 100644 drivers/net/eepro100.c
create mode 100644 drivers/net/ixgbe/ixgbe_dcb.c
create mode 100644 drivers/net/ixgbe/ixgbe_dcb.h
create mode 100644 drivers/net/ixgbe/ixgbe_dcb_82598.c
create mode 100644 drivers/net/ixgbe/ixgbe_dcb_82598.h
create mode 100644 drivers/net/ixgbe/ixgbe_dcb_nl.c
create mode 100644 drivers/net/phy/et1011c.c
create mode 100644 drivers/net/phy/mdio-gpio.c
delete mode 100644 drivers/net/phy/mdio-ofgpio.c
create mode 100644 drivers/net/phy/national.c
create mode 100644 drivers/net/phy/ste10Xp.c
create mode 100644 drivers/net/sfc/falcon_gmac.c
create mode 100644 drivers/net/sfc/mtd.c
create mode 100644 drivers/net/smsc911x.c
create mode 100644 drivers/net/smsc911x.h
create mode 100644 drivers/net/smsc9420.c
create mode 100644 drivers/net/smsc9420.h
rename drivers/net/wan/{hd6457x.c => hd64570.c} (78%)
create mode 100644 drivers/net/wan/hd64572.c
create mode 100644 drivers/net/wan/ixp4xx_hss.c
delete mode 100644 drivers/net/wan/syncppp.c
create mode 100644 drivers/net/wireless/ath9k/ani.c
create mode 100644 drivers/net/wireless/ath9k/calib.c
delete mode 100644 drivers/net/wireless/ath9k/core.c
create mode 100644 drivers/net/wireless/ath9k/debug.c
create mode 100644 drivers/net/wireless/ath9k/eeprom.c
create mode 100644 drivers/net/wireless/ath9k/mac.c
create mode 100644 drivers/net/wireless/ipw2x00/Kconfig
create mode 100644 drivers/net/wireless/ipw2x00/Makefile
rename drivers/net/wireless/{ => ipw2x00}/ipw2100.c (99%)
rename drivers/net/wireless/{ => ipw2x00}/ipw2100.h (100%)
rename drivers/net/wireless/{ => ipw2x00}/ipw2200.c (97%)
rename drivers/net/wireless/{ => ipw2x00}/ipw2200.h (99%)
rename net/ieee80211/ieee80211_geo.c => drivers/net/wireless/ipw2x00/libipw_geo.c (100%)
rename net/ieee80211/ieee80211_module.c => drivers/net/wireless/ipw2x00/libipw_module.c (88%)
rename net/ieee80211/ieee80211_rx.c => drivers/net/wireless/ipw2x00/libipw_rx.c (94%)
rename net/ieee80211/ieee80211_tx.c => drivers/net/wireless/ipw2x00/libipw_tx.c (98%)
rename net/ieee80211/ieee80211_wx.c => drivers/net/wireless/ipw2x00/libipw_wx.c (91%)
create mode 100644 drivers/net/wireless/iwlwifi/iwl-agn-hcmd-check.c
create mode 100644 drivers/net/wireless/iwlwifi/iwl-spectrum.c
create mode 100644 drivers/net/wireless/orinoco/Makefile
rename drivers/net/wireless/{ => orinoco}/airport.c (99%)
rename drivers/net/wireless/{ => orinoco}/hermes.c (100%)
rename drivers/net/wireless/{ => orinoco}/hermes.h (100%)
rename drivers/net/wireless/{ => orinoco}/hermes_dld.c (100%)
rename drivers/net/wireless/{ => orinoco}/hermes_dld.h (100%)
rename drivers/net/wireless/{ => orinoco}/hermes_rid.h (100%)
rename drivers/net/wireless/{ => orinoco}/orinoco.c (96%)
rename drivers/net/wireless/{ => orinoco}/orinoco.h (96%)
rename drivers/net/wireless/{ => orinoco}/orinoco_cs.c (98%)
rename drivers/net/wireless/{ => orinoco}/orinoco_nortel.c (100%)
rename drivers/net/wireless/{ => orinoco}/orinoco_pci.c (100%)
rename drivers/net/wireless/{ => orinoco}/orinoco_pci.h (100%)
rename drivers/net/wireless/{ => orinoco}/orinoco_plx.c (100%)
rename drivers/net/wireless/{ => orinoco}/orinoco_tmd.c (100%)
rename drivers/net/wireless/{ => orinoco}/spectrum_cs.c (95%)
create mode 100644 drivers/net/wireless/rtl818x/Makefile
rename drivers/net/wireless/{ => rtl818x}/rtl8180.h (100%)
rename drivers/net/wireless/{ => rtl818x}/rtl8180_dev.c (96%)
rename drivers/net/wireless/{ => rtl818x}/rtl8180_grf5101.c (100%)
rename drivers/net/wireless/{ => rtl818x}/rtl8180_grf5101.h (100%)
rename drivers/net/wireless/{ => rtl818x}/rtl8180_max2820.c (100%)
rename drivers/net/wireless/{ => rtl818x}/rtl8180_max2820.h (100%)
rename drivers/net/wireless/{ => rtl818x}/rtl8180_rtl8225.c (98%)
rename drivers/net/wireless/{ => rtl818x}/rtl8180_rtl8225.h (100%)
rename drivers/net/wireless/{ => rtl818x}/rtl8180_sa2400.c (100%)
rename drivers/net/wireless/{ => rtl818x}/rtl8180_sa2400.h (100%)
rename drivers/net/wireless/{ => rtl818x}/rtl8187.h (97%)
rename drivers/net/wireless/{ => rtl818x}/rtl8187_dev.c (79%)
rename drivers/net/wireless/{ => rtl818x}/rtl8187_rtl8225.c (69%)
rename drivers/net/wireless/{ => rtl818x}/rtl8187_rtl8225.h (100%)
rename drivers/net/wireless/{ => rtl818x}/rtl818x.h (98%)
create mode 100644 drivers/usb/gadget/f_phonet.c
create mode 100644 drivers/usb/gadget/u_phonet.h
create mode 100644 firmware/cxgb3/t3b_psram-1.1.0.bin.ihex
create mode 100644 firmware/cxgb3/t3c_psram-1.1.0.bin.ihex
create mode 100644 firmware/cxgb3/t3fw-7.0.0.bin.ihex
create mode 100644 include/linux/dcbnl.h
create mode 100644 include/linux/list_nulls.h
create mode 100644 include/linux/mdio-gpio.h
create mode 100644 include/linux/rculist_nulls.h
create mode 100644 include/linux/smsc911x.h
create mode 100644 include/net/dcbnl.h
rename include/net/{ieee80211_crypt.h => lib80211.h} (58%)
create mode 100644 include/net/netfilter/nfnetlink_log.h
create mode 100644 include/net/netns/xfrm.h
delete mode 100644 include/net/syncppp.h
create mode 100644 net/dcb/Kconfig
create mode 100644 net/dcb/Makefile
create mode 100644 net/dcb/dcbnl.c
delete mode 100644 net/ieee80211/Kconfig
delete mode 100644 net/ieee80211/Makefile
delete mode 100644 net/ieee80211/ieee80211_crypt.c
create mode 100644 net/sched/cls_cgroup.c
create mode 100644 net/sched/sch_drr.c
create mode 100644 net/wireless/lib80211.c
rename net/{ieee80211/ieee80211_crypt_ccmp.c => wireless/lib80211_crypt_ccmp.c} (74%)
rename net/{ieee80211/ieee80211_crypt_tkip.c => wireless/lib80211_crypt_tkip.c} (79%)
rename net/{ieee80211/ieee80211_crypt_wep.c => wireless/lib80211_crypt_wep.c} (74%)
create mode 100644 net/wireless/wext-compat.c
create mode 100644 net/xfrm/xfrm_sysctl.c
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [GIT]: Networking
2008-12-28 8:01 ` David Miller
@ 2008-12-29 10:25 ` Andreas Mohr
-1 siblings, 0 replies; 39+ messages in thread
From: Andreas Mohr @ 2008-12-29 10:25 UTC (permalink / raw)
To: David Miller
Cc: torvalds, akpm, bunk, Jeff Kirsher, auke-jan.h.kok, e1000-devel,
netdev, linux-kernel
Hi,
> Adrian Bunk (1):
>
> The overdue eepro100 removal.
That would be a rather pronounced NAK then? (sorry ;)
(reason: rendering my web surfing box useless due to networking loss,
see thread "[RFC/PATCH] e100 driver didn't support any MII-less PHYs...")
AFAICS e100 is still "non-MII"-challenged (2.6.28 doesn't appear to have
the necessary changes, and this pull doesn't seem to contain updates either),
and a long chain of attempts to get this resolved hasn't worked yet.
Somehow I seem to hit some nice walls getting my stuff into kernel.
- e100 MII
- i810 AGP resume fix
- acx100 (ok, that one is a bit mean to add to this list ;)
- ...
ALSA patches handled by Takashi OTOH were almost always a
"bammm, in it is, there you are, HAND".
I can't seem to wash away my slightly CK'ish feeling ;)
Thanks,
Andreas Mohr
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [GIT]: Networking
@ 2008-12-29 10:25 ` Andreas Mohr
0 siblings, 0 replies; 39+ messages in thread
From: Andreas Mohr @ 2008-12-29 10:25 UTC (permalink / raw)
To: David Miller
Cc: auke-jan.h.kok, e1000-devel, netdev, bunk, linux-kernel,
Jeff Kirsher, akpm, torvalds
Hi,
> Adrian Bunk (1):
>
> The overdue eepro100 removal.
That would be a rather pronounced NAK then? (sorry ;)
(reason: rendering my web surfing box useless due to networking loss,
see thread "[RFC/PATCH] e100 driver didn't support any MII-less PHYs...")
AFAICS e100 is still "non-MII"-challenged (2.6.28 doesn't appear to have
the necessary changes, and this pull doesn't seem to contain updates either),
and a long chain of attempts to get this resolved hasn't worked yet.
Somehow I seem to hit some nice walls getting my stuff into kernel.
- e100 MII
- i810 AGP resume fix
- acx100 (ok, that one is a bit mean to add to this list ;)
- ...
ALSA patches handled by Takashi OTOH were almost always a
"bammm, in it is, there you are, HAND".
I can't seem to wash away my slightly CK'ish feeling ;)
Thanks,
Andreas Mohr
------------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [GIT]: Networking
2008-12-29 10:25 ` Andreas Mohr
@ 2008-12-29 17:17 ` Andrew Morton
-1 siblings, 0 replies; 39+ messages in thread
From: Andrew Morton @ 2008-12-29 17:17 UTC (permalink / raw)
To: Andreas Mohr
Cc: David Miller, torvalds, bunk, Jeff Kirsher, auke-jan.h.kok,
e1000-devel, netdev, linux-kernel
On Mon, 29 Dec 2008 11:25:15 +0100 Andreas Mohr <andi@lisas.de> wrote:
> Hi,
>
> > Adrian Bunk (1):
> >
> > The overdue eepro100 removal.
>
> That would be a rather pronounced NAK then? (sorry ;)
> (reason: rendering my web surfing box useless due to networking loss,
> see thread "[RFC/PATCH] e100 driver didn't support any MII-less PHYs...")
>
> AFAICS e100 is still "non-MII"-challenged (2.6.28 doesn't appear to have
> the necessary changes, and this pull doesn't seem to contain updates either),
> and a long chain of attempts to get this resolved hasn't worked yet.
I didn't know about this, and that patch has been around for a
loooooooong time. Please make more noise about these things.
>
> Somehow I seem to hit some nice walls getting my stuff into kernel.
> - e100 MII
What's that? Does it make your web surfing work again?
> - i810 AGP resume fix
Whats that?
> - acx100 (ok, that one is a bit mean to add to this list ;)
What's that?
Just resend everything, please, fulyl changelogged, with all necessary
cc's.
> - ...
> ALSA patches handled by Takashi OTOH were almost always a
> "bammm, in it is, there you are, HAND".
Fell free to cc me on these things - especially bugfixes. I help
prevent things from getting lost.
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [GIT]: Networking
@ 2008-12-29 17:17 ` Andrew Morton
0 siblings, 0 replies; 39+ messages in thread
From: Andrew Morton @ 2008-12-29 17:17 UTC (permalink / raw)
To: Andreas Mohr
Cc: bunk, e1000-devel, netdev, auke-jan.h.kok, linux-kernel,
Jeff Kirsher, torvalds, David Miller
On Mon, 29 Dec 2008 11:25:15 +0100 Andreas Mohr <andi@lisas.de> wrote:
> Hi,
>
> > Adrian Bunk (1):
> >
> > The overdue eepro100 removal.
>
> That would be a rather pronounced NAK then? (sorry ;)
> (reason: rendering my web surfing box useless due to networking loss,
> see thread "[RFC/PATCH] e100 driver didn't support any MII-less PHYs...")
>
> AFAICS e100 is still "non-MII"-challenged (2.6.28 doesn't appear to have
> the necessary changes, and this pull doesn't seem to contain updates either),
> and a long chain of attempts to get this resolved hasn't worked yet.
I didn't know about this, and that patch has been around for a
loooooooong time. Please make more noise about these things.
>
> Somehow I seem to hit some nice walls getting my stuff into kernel.
> - e100 MII
What's that? Does it make your web surfing work again?
> - i810 AGP resume fix
Whats that?
> - acx100 (ok, that one is a bit mean to add to this list ;)
What's that?
Just resend everything, please, fulyl changelogged, with all necessary
cc's.
> - ...
> ALSA patches handled by Takashi OTOH were almost always a
> "bammm, in it is, there you are, HAND".
Fell free to cc me on these things - especially bugfixes. I help
prevent things from getting lost.
------------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [GIT]: Networking
2008-12-29 17:17 ` Andrew Morton
(?)
@ 2008-12-29 21:09 ` Johannes Berg
2008-12-30 11:05 ` Andreas Mohr
-1 siblings, 1 reply; 39+ messages in thread
From: Johannes Berg @ 2008-12-29 21:09 UTC (permalink / raw)
To: Andrew Morton
Cc: Andreas Mohr, David Miller, torvalds, bunk, Jeff Kirsher,
auke-jan.h.kok, e1000-devel, netdev, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 491 bytes --]
On Mon, 2008-12-29 at 09:17 -0800, Andrew Morton wrote:
> > - acx100 (ok, that one is a bit mean to add to this list ;)
>
> What's that?
>
> Just resend everything, please, fulyl changelogged, with all necessary
> cc's.
acx100 is legally challenged. We don't want to see it without a clear
and full indication by the authors that they can guarantee that it was
written without any copyrighted Texas Instruments material. Which
they've never bothered to provide.
johannes
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [GIT]: Networking
2008-12-29 17:17 ` Andrew Morton
@ 2008-12-29 23:15 ` Jeff Kirsher
-1 siblings, 0 replies; 39+ messages in thread
From: Jeff Kirsher @ 2008-12-29 23:15 UTC (permalink / raw)
To: Andrew Morton
Cc: Andreas Mohr, David Miller, torvalds, bunk, auke-jan.h.kok,
e1000-devel, netdev, linux-kernel
On Mon, Dec 29, 2008 at 9:17 AM, Andrew Morton
<akpm@linux-foundation.org> wrote:
> On Mon, 29 Dec 2008 11:25:15 +0100 Andreas Mohr <andi@lisas.de> wrote:
>
>> Hi,
>>
>> > Adrian Bunk (1):
>> >
>> > The overdue eepro100 removal.
>>
>> That would be a rather pronounced NAK then? (sorry ;)
>> (reason: rendering my web surfing box useless due to networking loss,
>> see thread "[RFC/PATCH] e100 driver didn't support any MII-less PHYs...")
>>
>> AFAICS e100 is still "non-MII"-challenged (2.6.28 doesn't appear to have
>> the necessary changes, and this pull doesn't seem to contain updates either),
>> and a long chain of attempts to get this resolved hasn't worked yet.
>
> I didn't know about this, and that patch has been around for a
> loooooooong time. Please make more noise about these things.
>
>>
>> Somehow I seem to hit some nice walls getting my stuff into kernel.
>> - e100 MII
>
> What's that? Does it make your web surfing work again?
He is referring to a patch to add support for devices which do not use
the MII interface which use an Intel MAC. I have the patch in my
local tree and have been keeping it up-to-date. I should have an
update on this patch after the New Year.
--
Cheers,
Jeff
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [GIT]: Networking
@ 2008-12-29 23:15 ` Jeff Kirsher
0 siblings, 0 replies; 39+ messages in thread
From: Jeff Kirsher @ 2008-12-29 23:15 UTC (permalink / raw)
To: Andrew Morton
Cc: bunk, e1000-devel, netdev, auke-jan.h.kok, Andreas Mohr,
linux-kernel, torvalds, David Miller
On Mon, Dec 29, 2008 at 9:17 AM, Andrew Morton
<akpm@linux-foundation.org> wrote:
> On Mon, 29 Dec 2008 11:25:15 +0100 Andreas Mohr <andi@lisas.de> wrote:
>
>> Hi,
>>
>> > Adrian Bunk (1):
>> >
>> > The overdue eepro100 removal.
>>
>> That would be a rather pronounced NAK then? (sorry ;)
>> (reason: rendering my web surfing box useless due to networking loss,
>> see thread "[RFC/PATCH] e100 driver didn't support any MII-less PHYs...")
>>
>> AFAICS e100 is still "non-MII"-challenged (2.6.28 doesn't appear to have
>> the necessary changes, and this pull doesn't seem to contain updates either),
>> and a long chain of attempts to get this resolved hasn't worked yet.
>
> I didn't know about this, and that patch has been around for a
> loooooooong time. Please make more noise about these things.
>
>>
>> Somehow I seem to hit some nice walls getting my stuff into kernel.
>> - e100 MII
>
> What's that? Does it make your web surfing work again?
He is referring to a patch to add support for devices which do not use
the MII interface which use an Intel MAC. I have the patch in my
local tree and have been keeping it up-to-date. I should have an
update on this patch after the New Year.
--
Cheers,
Jeff
------------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [GIT]: Networking
2008-12-29 21:09 ` Johannes Berg
@ 2008-12-30 11:05 ` Andreas Mohr
0 siblings, 0 replies; 39+ messages in thread
From: Andreas Mohr @ 2008-12-30 11:05 UTC (permalink / raw)
To: Johannes Berg
Cc: Andrew Morton, Andreas Mohr, David Miller, torvalds, bunk,
Jeff Kirsher, auke-jan.h.kok, e1000-devel, netdev, linux-kernel
Hi,
On Mon, Dec 29, 2008 at 10:09:43PM +0100, Johannes Berg wrote:
> On Mon, 2008-12-29 at 09:17 -0800, Andrew Morton wrote:
>
> > > - acx100 (ok, that one is a bit mean to add to this list ;)
> >
> > What's that?
> >
> > Just resend everything, please, fulyl changelogged, with all necessary
> > cc's.
>
> acx100 is legally challenged. We don't want to see it without a clear
> and full indication by the authors that they can guarantee that it was
> written without any copyrighted Texas Instruments material. Which
> they've never bothered to provide.
True (and fully agreed), but then that particular entry was just meant
to stir up some fog, I didn't really intend to focus on it at all ;)
The project was based on non-clean-room reverse-engineering from the get-go
anyway (5 people working for 3 months),
thus the only way to get this unfortunate hardware non-support situation
resolved would be by trying to get TI (or possibly newer holders
of that technology) to extend its specifications/firmware blessing
to older variants, not just the Android device-related chipsets supported
by their new driver which they now provided, thankfully.
Andreas Mohr
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [GIT]: Networking
2008-12-29 23:15 ` Jeff Kirsher
@ 2008-12-30 12:07 ` Andreas Mohr
-1 siblings, 0 replies; 39+ messages in thread
From: Andreas Mohr @ 2008-12-30 12:07 UTC (permalink / raw)
To: Jeff Kirsher
Cc: Andrew Morton, Andreas Mohr, David Miller, torvalds, bunk,
auke-jan.h.kok, e1000-devel, netdev, linux-kernel
On Mon, Dec 29, 2008 at 03:15:37PM -0800, Jeff Kirsher wrote:
> He is referring to a patch to add support for devices which do not use
> the MII interface which use an Intel MAC. I have the patch in my
> local tree and have been keeping it up-to-date. I should have an
> update on this patch after the New Year.
Thanks!
One idea worth pondering might be to provide a special struct
mii_if_info hookup (fully emulated mdio_read()/write())
for the case of the non-MII hardware types of this driver,
thus eliminating any added penalty in the case of nicely MII-compliant
hardware.
But this should be tackled later, now let's better move on with eepro100
(non-)plans...
Andreas Mohr
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [GIT]: Networking
@ 2008-12-30 12:07 ` Andreas Mohr
0 siblings, 0 replies; 39+ messages in thread
From: Andreas Mohr @ 2008-12-30 12:07 UTC (permalink / raw)
To: Jeff Kirsher
Cc: bunk, e1000-devel, netdev, auke-jan.h.kok, Andreas Mohr,
linux-kernel, Andrew Morton, torvalds, David Miller
On Mon, Dec 29, 2008 at 03:15:37PM -0800, Jeff Kirsher wrote:
> He is referring to a patch to add support for devices which do not use
> the MII interface which use an Intel MAC. I have the patch in my
> local tree and have been keeping it up-to-date. I should have an
> update on this patch after the New Year.
Thanks!
One idea worth pondering might be to provide a special struct
mii_if_info hookup (fully emulated mdio_read()/write())
for the case of the non-MII hardware types of this driver,
thus eliminating any added penalty in the case of nicely MII-compliant
hardware.
But this should be tackled later, now let's better move on with eepro100
(non-)plans...
Andreas Mohr
------------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 39+ messages in thread
* 2.6.29 e100.c non-MII support status? (Re: [GIT]: Networking)
2008-12-30 12:07 ` Andreas Mohr
@ 2009-02-28 20:37 ` Andreas Mohr
-1 siblings, 0 replies; 39+ messages in thread
From: Andreas Mohr @ 2009-02-28 20:37 UTC (permalink / raw)
To: andi
Cc: Jeff Kirsher, Andrew Morton, David Miller, torvalds, bunk,
auke-jan.h.kok, e1000-devel, netdev, linux-kernel
Hi,
On Tue, Dec 30, 2008 at 01:07:56PM +0100, Andreas Mohr wrote:
> On Mon, Dec 29, 2008 at 03:15:37PM -0800, Jeff Kirsher wrote:
> > He is referring to a patch to add support for devices which do not use
> > the MII interface which use an Intel MAC. I have the patch in my
> > local tree and have been keeping it up-to-date. I should have an
> > update on this patch after the New Year.
>
> Thanks!
>
> One idea worth pondering might be to provide a special struct
> mii_if_info hookup (fully emulated mdio_read()/write())
> for the case of the non-MII hardware types of this driver,
> thus eliminating any added penalty in the case of nicely MII-compliant
> hardware.
> But this should be tackled later, now let's better move on with eepro100
> (non-)plans...
>
> Andreas Mohr
Given that 2.6.29-rc now actually has eepro100.c removed (since -rc3 or so)
and the current -rc6 e100.c does not contain non-MII parts, it looks like
2.6.29 proper will actually remove support for some PCI-based non-MII
e100 cards.
Thus I'd like to ask what should be done about this for real.
Of course we could consciously decide to simply skip e100.c support for those
non-MII cards entirely (hoping that they're not THAT wide-spread),
but obviously I'd semi-hate this (nevermind the fact that _locally_
I'd have to swap cards, too, which is somewhat more of a problem given an
older network requiring to be served by "combo" cards).
Simply spoken, it all boils down to actively deciding
what to do in the next, about-to-be _affected_, kernel version
about support for cards that an older, deprecated driver did support
and the new one doesn't.
Or one could just let things progress as-is and wait for
yet unknown (non-)amounts of scorching user feedback to arrive
after 2.6.29 has hit their machines ;)
My description in the mail above was meant to list things to be done
_after_ an initial non-MII support for e100.c has been added,
just for clarification.
Thanks,
Andreas Mohr
^ permalink raw reply [flat|nested] 39+ messages in thread
* 2.6.29 e100.c non-MII support status? (Re: [GIT]: Networking)
@ 2009-02-28 20:37 ` Andreas Mohr
0 siblings, 0 replies; 39+ messages in thread
From: Andreas Mohr @ 2009-02-28 20:37 UTC (permalink / raw)
To: andi
Cc: auke-jan.h.kok, e1000-devel, netdev, bunk, linux-kernel,
Jeff Kirsher, Andrew Morton, torvalds, David Miller
Hi,
On Tue, Dec 30, 2008 at 01:07:56PM +0100, Andreas Mohr wrote:
> On Mon, Dec 29, 2008 at 03:15:37PM -0800, Jeff Kirsher wrote:
> > He is referring to a patch to add support for devices which do not use
> > the MII interface which use an Intel MAC. I have the patch in my
> > local tree and have been keeping it up-to-date. I should have an
> > update on this patch after the New Year.
>
> Thanks!
>
> One idea worth pondering might be to provide a special struct
> mii_if_info hookup (fully emulated mdio_read()/write())
> for the case of the non-MII hardware types of this driver,
> thus eliminating any added penalty in the case of nicely MII-compliant
> hardware.
> But this should be tackled later, now let's better move on with eepro100
> (non-)plans...
>
> Andreas Mohr
Given that 2.6.29-rc now actually has eepro100.c removed (since -rc3 or so)
and the current -rc6 e100.c does not contain non-MII parts, it looks like
2.6.29 proper will actually remove support for some PCI-based non-MII
e100 cards.
Thus I'd like to ask what should be done about this for real.
Of course we could consciously decide to simply skip e100.c support for those
non-MII cards entirely (hoping that they're not THAT wide-spread),
but obviously I'd semi-hate this (nevermind the fact that _locally_
I'd have to swap cards, too, which is somewhat more of a problem given an
older network requiring to be served by "combo" cards).
Simply spoken, it all boils down to actively deciding
what to do in the next, about-to-be _affected_, kernel version
about support for cards that an older, deprecated driver did support
and the new one doesn't.
Or one could just let things progress as-is and wait for
yet unknown (non-)amounts of scorching user feedback to arrive
after 2.6.29 has hit their machines ;)
My description in the mail above was meant to list things to be done
_after_ an initial non-MII support for e100.c has been added,
just for clarification.
Thanks,
Andreas Mohr
------------------------------------------------------------------------------
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: 2.6.29 e100.c non-MII support status? (Re: [GIT]: Networking)
2009-02-28 20:37 ` Andreas Mohr
(?)
@ 2009-03-01 10:57 ` Jeff Kirsher
2009-03-01 21:24 ` Andreas Mohr
-1 siblings, 1 reply; 39+ messages in thread
From: Jeff Kirsher @ 2009-03-01 10:57 UTC (permalink / raw)
To: andi
Cc: Andrew Morton, David Miller, torvalds, bunk, auke-jan.h.kok,
e1000-devel, netdev, linux-kernel
On Sat, Feb 28, 2009 at 12:37 PM, Andreas Mohr
<andim2@users.sourceforge.net> wrote:
> Hi,
>
> On Tue, Dec 30, 2008 at 01:07:56PM +0100, Andreas Mohr wrote:
>> On Mon, Dec 29, 2008 at 03:15:37PM -0800, Jeff Kirsher wrote:
>> > He is referring to a patch to add support for devices which do not use
>> > the MII interface which use an Intel MAC. I have the patch in my
>> > local tree and have been keeping it up-to-date. I should have an
>> > update on this patch after the New Year.
>>
>> Thanks!
>>
>> One idea worth pondering might be to provide a special struct
>> mii_if_info hookup (fully emulated mdio_read()/write())
>> for the case of the non-MII hardware types of this driver,
>> thus eliminating any added penalty in the case of nicely MII-compliant
>> hardware.
>> But this should be tackled later, now let's better move on with eepro100
>> (non-)plans...
>>
>> Andreas Mohr
>
> Given that 2.6.29-rc now actually has eepro100.c removed (since -rc3 or so)
> and the current -rc6 e100.c does not contain non-MII parts, it looks like
> 2.6.29 proper will actually remove support for some PCI-based non-MII
> e100 cards.
>
> Thus I'd like to ask what should be done about this for real.
> Of course we could consciously decide to simply skip e100.c support for those
> non-MII cards entirely (hoping that they're not THAT wide-spread),
> but obviously I'd semi-hate this (nevermind the fact that _locally_
> I'd have to swap cards, too, which is somewhat more of a problem given an
> older network requiring to be served by "combo" cards).
>
> Simply spoken, it all boils down to actively deciding
> what to do in the next, about-to-be _affected_, kernel version
> about support for cards that an older, deprecated driver did support
> and the new one doesn't.
>
> Or one could just let things progress as-is and wait for
> yet unknown (non-)amounts of scorching user feedback to arrive
> after 2.6.29 has hit their machines ;)
>
>
> My description in the mail above was meant to list things to be done
> _after_ an initial non-MII support for e100.c has been added,
> just for clarification.
>
> Thanks,
>
> Andreas Mohr
> --
I am personally sorry that nothing has been done regarding this patch.
I still have this patch in my local tree. I admit that this patch
has been on the low priority list, so I will make sure the patch is
current this week and respond accordingly this week.
--
Cheers,
Jeff
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: 2.6.29 e100.c non-MII support status? (Re: [GIT]: Networking)
2009-03-01 10:57 ` Jeff Kirsher
@ 2009-03-01 21:24 ` Andreas Mohr
2009-06-02 21:48 ` [PATCH] Add non-MII PHY support to e100 (Re: 2.6.29 e100.c non-MII support status? (Re: [GIT]: Networking)) Andreas Mohr
0 siblings, 1 reply; 39+ messages in thread
From: Andreas Mohr @ 2009-03-01 21:24 UTC (permalink / raw)
To: Jeff Kirsher
Cc: andi, Andrew Morton, David Miller, torvalds, bunk,
auke-jan.h.kok, e1000-devel, netdev, linux-kernel
Hi,
On Sun, Mar 01, 2009 at 02:57:46AM -0800, Jeff Kirsher wrote:
> I am personally sorry that nothing has been done regarding this patch.
> I still have this patch in my local tree. I admit that this patch
> has been on the low priority list, so I will make sure the patch is
> current this week and respond accordingly this week.
The whole thing has been somewhat low-priority indeed
given the probable age of some non-MII contenders. OTOH it would be quite sad
(and locally problematic) to see support for those non-MII cards vanish
come 2.6.29.
Subsequently it would then be nice to devise non-MII support
in some structured way that enables us to support them without
much burden (code-wise) on proper standards-supporting MII cards.
Thank you,
Andreas Mohr
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH] Add non-MII PHY support to e100 (Re: 2.6.29 e100.c non-MII support status? (Re: [GIT]: Networking))
2009-03-01 21:24 ` Andreas Mohr
@ 2009-06-02 21:48 ` Andreas Mohr
2009-06-03 6:01 ` e100 kills S2R on my box, plus network drops dead Andreas Mohr
0 siblings, 1 reply; 39+ messages in thread
From: Andreas Mohr @ 2009-06-02 21:48 UTC (permalink / raw)
To: andi
Cc: Jeff Kirsher, Andrew Morton, David Miller, torvalds, bunk,
auke-jan.h.kok, e1000-devel, netdev, linux-kernel
Hi,
On Sun, Mar 01, 2009 at 10:24:12PM +0100, Andreas Mohr wrote:
> The whole thing has been somewhat low-priority indeed
> given the probable age of some non-MII contenders. OTOH it would be quite sad
> (and locally problematic) to see support for those non-MII cards vanish
> come 2.6.29.
> Subsequently it would then be nice to devise non-MII support
> in some structured way that enables us to support them without
> much burden (code-wise) on proper standards-supporting MII cards.
OK, so.......
Frankly, I didn't want to see my card slowly and painfully getting unsupported
(which, conversely, results in a PC cut off from ANY kernel upgrades...).
Thus I decided to clean up my previous still-too-messy patch
by removing all dirty "are we MII?" - noooo - skip it! barriers.
ChangeLog:
Restore support for cards with MII-lacking PHYs as compared to
removed pre-2.6.29 eepro100 driver:
use full low-level MII I/O access abstraction by providing clean
PHY-specific mdio_ctrl() functions for either standard MII-compliant cards,
slightly special ones or non-MII PHY ones.
We now have another netdev_priv member for mdio_ctrl(),
thus we have some array indirection, but we save some additional opcodes
for specific phy_82552_v handling in the common case.
Patch tested on 2.6.30-rc7 (cold boot results in working network
access - this mail typed.....), checkpatch.pl'ed.
Obviously this patch needs quite some testing (-mmotm?),
since it also touches phy_82552_v functionality.
Oh, and this will be my very ultimately last attempt at this,
if there's no serious inclusion of something similar to this,
then I'll just give up.
[and install my nice WGA'd DRM'd and billed/invaded-by-the-minute Windows...]
Thanks!
Signed-off-by: Andreas Mohr <andi@lisas.de>
--- linux-2.6.30-rc7/drivers/net/e100.c.orig 2009-06-02 19:27:19.000000000 +0200
+++ linux-2.6.30-rc7/drivers/net/e100.c 2009-06-02 23:31:25.000000000 +0200
@@ -143,6 +143,8 @@
* FIXES:
* 2005/12/02 - Michael O'Donnell <Michael.ODonnell at stratus dot com>
* - Stratus87247: protect MDI control register manipulations
+ * 2009/06/01 - Andreas Mohr <andi at lisas dot de>
+ * - add clean lowlevel I/O emulation for cards with MII-lacking PHYs
*/
#include <linux/module.h>
@@ -372,6 +374,7 @@
enum eeprom_offsets {
eeprom_cnfg_mdix = 0x03,
+ eeprom_phy_iface = 0x06,
eeprom_id = 0x0A,
eeprom_config_asf = 0x0D,
eeprom_smbus_addr = 0x90,
@@ -381,6 +384,18 @@
eeprom_mdix_enabled = 0x0080,
};
+enum eeprom_phy_iface {
+ NonSuchPhy = 0,
+ I82553AB,
+ I82553C,
+ I82503,
+ DP83840,
+ S80C240,
+ S80C24,
+ I82555,
+ DP83840A = 10,
+};
+
enum eeprom_id {
eeprom_id_wol = 0x0020,
};
@@ -545,6 +560,7 @@
u32 msg_enable ____cacheline_aligned;
struct net_device *netdev;
struct pci_dev *pdev;
+ u16 (*mdio_ctrl)(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data);
struct rx *rxs ____cacheline_aligned;
struct rx *rx_to_use;
@@ -899,7 +915,21 @@
return err;
}
-static u16 mdio_ctrl(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data)
+static int mdio_read(struct net_device *netdev, int addr, int reg)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return nic->mdio_ctrl(nic, addr, mdi_read, reg, 0);
+}
+
+static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ nic->mdio_ctrl(nic, addr, mdi_write, reg, data);
+}
+
+/* the standard mdio_ctrl() function for usual MII-compliant hardware */
+static u16 mdio_ctrl_hw(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data)
{
u32 data_out = 0;
unsigned int i;
@@ -938,30 +968,83 @@
return (u16)data_out;
}
-static int mdio_read(struct net_device *netdev, int addr, int reg)
-{
- return mdio_ctrl(netdev_priv(netdev), addr, mdi_read, reg, 0);
+/* slightly tweaked mdio_ctrl() function for phy_82552_v specifics */
+static u16 mdio_ctrl_phy_82552_v(struct nic *nic,
+ u32 addr,
+ u32 dir,
+ u32 reg,
+ u16 data)
+{
+ if ((reg == MII_BMCR) && (dir == mdi_write)) {
+ if (data & (BMCR_ANRESTART | BMCR_ANENABLE)) {
+ u16 advert = mdio_read(nic->netdev, nic->mii.phy_id,
+ MII_ADVERTISE);
+
+ /*
+ * Workaround Si issue where sometimes the part will not
+ * autoneg to 100Mbps even when advertised.
+ */
+ if (advert & ADVERTISE_100FULL)
+ data |= BMCR_SPEED100 | BMCR_FULLDPLX;
+ else if (advert & ADVERTISE_100HALF)
+ data |= BMCR_SPEED100;
+ }
+ }
+ return mdio_ctrl_hw(nic, addr, dir, reg, data);
}
-static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
-{
- struct nic *nic = netdev_priv(netdev);
-
- if ((nic->phy == phy_82552_v) && (reg == MII_BMCR) &&
- (data & (BMCR_ANRESTART | BMCR_ANENABLE))) {
- u16 advert = mdio_read(netdev, nic->mii.phy_id, MII_ADVERTISE);
-
- /*
- * Workaround Si issue where sometimes the part will not
- * autoneg to 100Mbps even when advertised.
- */
- if (advert & ADVERTISE_100FULL)
- data |= BMCR_SPEED100 | BMCR_FULLDPLX;
- else if (advert & ADVERTISE_100HALF)
- data |= BMCR_SPEED100;
+/* Fully software-emulated mdio_ctrl() function for cards without
+ * MII-compliant PHYs.
+ * For now, this is mainly geared towards 80c24 support; in case of further
+ * requirements for other types (i82503, ...?) either extend this mechanism
+ * or split it, whichever is cleaner.
+ */
+static u16 mdio_ctrl_phy_mii_emulated(struct nic *nic,
+ u32 addr,
+ u32 dir,
+ u32 reg,
+ u16 data)
+{
+ /* might need to allocate a netdev_priv'ed register array eventually
+ * to be able to record state changes, but for now
+ * some fully hardcoded register handling ought to be ok I guess. */
+
+ if (dir == mdi_read) {
+ switch (reg) {
+ case MII_BMCR:
+ /* Auto-negotiation, right? */
+ return BMCR_ANENABLE |
+ BMCR_FULLDPLX;
+ case MII_BMSR:
+ return BMSR_LSTATUS /* for mii_link_ok() */ |
+ BMSR_ANEGCAPABLE |
+ BMSR_10FULL;
+ case MII_ADVERTISE:
+ /* 80c24 is a "combo card" PHY, right? */
+ return ADVERTISE_10HALF |
+ ADVERTISE_10FULL;
+ default:
+ DPRINTK(HW, DEBUG,
+ "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
+ dir == mdi_read ? "READ" : "WRITE", addr, reg, data);
+ return 0xFFFF;
+ }
+ } else {
+ switch (reg) {
+ default:
+ DPRINTK(HW, DEBUG,
+ "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
+ dir == mdi_read ? "READ" : "WRITE", addr, reg, data);
+ return 0xFFFF;
+ }
}
-
- mdio_ctrl(netdev_priv(netdev), addr, mdi_write, reg, data);
+}
+static inline int e100_phy_supports_mii(struct nic *nic)
+{
+ /* for now, just check it by comparing whether we
+ are using MII software emulation.
+ */
+ return (nic->mdio_ctrl != mdio_ctrl_phy_mii_emulated);
}
static void e100_get_defaults(struct nic *nic)
@@ -1013,7 +1096,8 @@
config->standard_stat_counter = 0x1; /* 1=standard, 0=extended */
config->rx_discard_short_frames = 0x1; /* 1=discard, 0=pass */
config->tx_underrun_retry = 0x3; /* # of underrun retries */
- config->mii_mode = 0x1; /* 1=MII mode, 0=503 mode */
+ if (e100_phy_supports_mii(nic))
+ config->mii_mode = 1; /* 1=MII mode, 0=i82503 mode */
config->pad10 = 0x6;
config->no_source_addr_insertion = 0x1; /* 1=no, 0=yes */
config->preamble_length = 0x2; /* 0=1, 1=3, 2=7, 3=15 bytes */
@@ -1270,6 +1354,44 @@
offsetof(struct mem, dump_buf));
}
+static int e100_phy_check_without_mii(struct nic *nic)
+{
+ u8 phy_type;
+ int without_mii;
+
+ phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f;
+
+ switch (phy_type) {
+ case NonSuchPhy: /* Non-MII PHY; UNTESTED! */
+ case I82503: /* Non-MII PHY; UNTESTED! */
+ case S80C24: /* Non-MII PHY; tested and working */
+ {
+ /* paragraph from the FreeBSD driver, "FXP_PHY_80C24":
+ * The Seeq 80c24 AutoDUPLEX(tm) Ethernet Interface Adapter
+ * doesn't have a programming interface of any sort. The
+ * media is sensed automatically based on how the link partner
+ * is configured. This is, in essence, manual configuration.
+ */
+ DPRINTK(PROBE, INFO,
+ "found MII-less i82503 or 80c24 or other PHY\n");
+
+ nic->mdio_ctrl = mdio_ctrl_phy_mii_emulated;
+ nic->mii.phy_id = 0; /* is this ok for an MII-less PHY? */
+
+ /* these might be needed for certain MII-less cards...
+ * nic->flags |= ich;
+ * nic->flags |= ich_10h_workaround; */
+
+ without_mii = 1;
+ }
+ break;
+ default:
+ without_mii = 0;
+ break;
+ }
+ return without_mii;
+}
+
#define NCONFIG_AUTO_SWITCH 0x0080
#define MII_NSC_CONG MII_RESV1
#define NSC_CONG_ENABLE 0x0100
@@ -1290,9 +1412,21 @@
if (!((bmcr == 0xFFFF) || ((stat == 0) && (bmcr == 0))))
break;
}
- DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
- if (addr == 32)
- return -EAGAIN;
+ if (addr == 32) {
+ /* uhoh, no PHY detected: check whether we seem to be some
+ * weird, rare variant which is *known* to not have any MII.
+ * But do this AFTER MII checking only, since this does
+ * lookup of EEPROM values which may easily be unreliable. */
+ if (e100_phy_check_without_mii(nic))
+ return 0; /* simply return and hope for the best */
+ else {
+ /* for unknown cases log a fatal error */
+ DPRINTK(HW, ERR,
+ "Failed to locate any known PHY, aborting.\n");
+ return -EAGAIN;
+ }
+ } else
+ DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
/* Isolate all the PHY ids */
for (addr = 0; addr < 32; addr++)
@@ -1320,6 +1454,9 @@
if (nic->phy == phy_82552_v) {
u16 advert = mdio_read(netdev, nic->mii.phy_id, MII_ADVERTISE);
+ /* assign special tweaked mdio_ctrl() function */
+ nic->mdio_ctrl = mdio_ctrl_phy_82552_v;
+
/* Workaround Si not advertising flow-control during autoneg */
advert |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
mdio_write(netdev, nic->mii.phy_id, MII_ADVERTISE, advert);
@@ -2585,6 +2722,7 @@
nic->netdev = netdev;
nic->pdev = pdev;
nic->msg_enable = (1 << debug) - 1;
+ nic->mdio_ctrl = mdio_ctrl_hw;
pci_set_drvdata(pdev, netdev);
if ((err = pci_enable_device(pdev))) {
^ permalink raw reply [flat|nested] 39+ messages in thread
* e100 kills S2R on my box, plus network drops dead
2009-06-02 21:48 ` [PATCH] Add non-MII PHY support to e100 (Re: 2.6.29 e100.c non-MII support status? (Re: [GIT]: Networking)) Andreas Mohr
@ 2009-06-03 6:01 ` Andreas Mohr
2009-06-03 6:30 ` Andreas Mohr
0 siblings, 1 reply; 39+ messages in thread
From: Andreas Mohr @ 2009-06-03 6:01 UTC (permalink / raw)
To: andi; +Cc: Jeff Kirsher, rjw, e1000-devel, netdev, linux-kernel
Hi,
following my patch I tested -rc8 with it, everything pretty fine so far,
except for a S2R attempt:
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.02 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI handle has no context!
serial 00:09: disabled
ACPI handle has no context!
r8169 0000:02:0f.0: PME# enabled
ACPI handle has no context!
ACPI handle has no context!
e100 0000:02:07.0: PCI INT A disabled
pci_legacy_suspend(): e100_suspend+0x0/0x20 [e100] returns -5
pm_op(): pci_pm_suspend+0x0/0xd7 returns -5
PM: Device 0000:02:07.0 failed to suspend: error -5
PM: Some devices failed to suspend
firewire_ohci 0000:02:0e.0: restoring config space at offset 0xf (was
0x4020100, writing 0x402010b)
firewire_ohci 0000:02:0e.0: restoring config space at offset 0x5 (was
0x0, writing 0xfddf8000)
static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
{
bool wake;
__e100_shutdown(pdev, &wake);
return __e100_power_off(pdev, wake);
}
static int __e100_power_off(struct pci_dev *pdev, bool wake)
{
if (wake) {
return pci_prepare_to_sleep(pdev);
} else {
pci_wake_from_d3(pdev, false);
return pci_set_power_state(pdev, PCI_D3hot);
}
}
Well, the problem being that my card does not _have_ any PM support:
lspci -vvv:
02:07.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet
Pro 100 (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 14000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fdaff000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at df00 [size=32]
Region 2: Memory at fdc00000 (32-bit, non-prefetchable)
[size=1M]
[virtual] Expansion ROM at fdb00000 [disabled] [size=1M]
Kernel driver in use: e100
So I'm back up to the desktop rather quicker than I would have liked.
Worse, after resume I don't have my network back, and attempting to
unload e100 or ifconfig eth0 down results in this:
INFO: task nmbd:4633 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
nmbd D 00000061 0 4633 1
f56f7d14 00000082 0410aa36 00000061 00000100 f6716240 f61a7200 c0563740
c0563740 f6716000 f56f7cd0 f61f3000 f61f3284 c1f1f740 00000001 04132611
00000061 00000000 f56f7cfc c031fe90 f61a7200 40000040 f61f3284 f6716240
Call Trace:
[<c031fe90>] ? ip_push_pending_frames+0x2b6/0x2c0
[<c0336a8e>] ? udp_push_pending_frames+0x296/0x2e3
[<c0365bef>] __mutex_lock_common+0x136/0x239
[<c0365d04>] __mutex_lock_slowpath+0x12/0x15
[<c0365dbc>] ? mutex_lock+0x21/0x2e
[<c0365dbc>] mutex_lock+0x21/0x2e
[<c030b7ad>] rtnetlink_rcv+0x10/0x24
[<c0316723>] netlink_unicast+0xee/0x144
[<c0316996>] netlink_sendmsg+0x21d/0x22a
[<c02f800e>] sock_sendmsg+0xca/0xe1
[<c01352bf>] ? autoremove_wake_function+0x0/0x33
[<c01352bf>] ? autoremove_wake_function+0x0/0x33
[<c0183e88>] ? set_fd_set+0x38/0x3d
[<c011a47b>] ? __wake_up+0x31/0x3b
[<c022cb52>] ? might_fault+0x17/0x19
[<c022cb7e>] ? copy_from_user+0x2a/0x112
[<c02f825b>] sys_sendto+0xa4/0xc3
[<c02f893d>] ? move_addr_to_user+0x40/0x57
[<c02f8c63>] ? sys_getsockname+0x52/0x6f
[<c0199905>] ? inotify_d_instantiate+0x12/0x34
[<c0185f9f>] ? __d_instantiate+0x2d/0x30
[<c02f7d21>] ? sock_attach_fd+0x7e/0xab
[<c02f8ecc>] sys_socketcall+0xd5/0x16d
[<c01029f5>] syscall_call+0x7/0xb
IOW, we're deadlocking on the rtnl lock - something must have gone wrong network-wise
during suspend / emergency-resume handling.
IOW, we have _two_ issues:
- that PM suspend part here doesn't support non-PM PCI cards
- PM suspend breaks networking stuff (or is that caused by incomplete reinitialization of my card,
thus it's not network-suitable after resume and hangs on some network APIs?)
What to do?
(I should have provided some SysRq-T(?) lock traces I guess, will record that now)
Oh, and I will test whether eepro100 S2R works on that machine, and if
so what that driver does to avoid trouble.
Thanks,
Andreas Mohr
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: e100 kills S2R on my box, plus network drops dead
2009-06-03 6:01 ` e100 kills S2R on my box, plus network drops dead Andreas Mohr
@ 2009-06-03 6:30 ` Andreas Mohr
0 siblings, 0 replies; 39+ messages in thread
From: Andreas Mohr @ 2009-06-03 6:30 UTC (permalink / raw)
To: andi; +Cc: Jeff Kirsher, rjw, e1000-devel, netdev, linux-kernel
Hi,
On Wed, Jun 03, 2009 at 08:01:23AM +0200, Andreas Mohr wrote:
> IOW, we have _two_ issues:
>
> - that PM suspend part here doesn't support non-PM PCI cards
> - PM suspend breaks networking stuff (or is that caused by incomplete reinitialization of my card,
> thus it's not network-suitable after resume and hangs on some network APIs?)
>
> What to do?
>
> (I should have provided some SysRq-T(?) lock traces I guess, will record that now)
Those were not too useful methinks, but I can provide them if need be.
> Oh, and I will test whether eepro100 S2R works on that machine, and if
> so what that driver does to avoid trouble.
Well, yes, eepro100 (2.6.28.10) does achieve successful S2R,
and I _do_ have working network even after resume (which is not too astonishing
since it almost takes active measures to NOT make this card work,
given that it's fully auto-configuring on the transceiver side)
static int eepro100_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata (pdev);
struct speedo_private *sp = netdev_priv(dev);
void __iomem *ioaddr = sp->regs;
pci_save_state(pdev);
if (!netif_running(dev))
return 0;
del_timer_sync(&sp->timer);
netif_device_detach(dev);
iowrite32(PortPartialReset, ioaddr + SCBPort);
/* XXX call pci_set_power_state ()? */
pci_disable_device(pdev);
pci_set_power_state (pdev, PCI_D3hot);
return 0;
}
That's pretty boring code, linearily executing stuff without checking
results, thus it's unsurprising that it does not prevent suspend
on a non-PM PCI card.
So, what to do to fix those suspend issues on the e100 side of things?
And do we perhaps have similar non-PM PCI card support issues
with other drivers?
Thanks,
Andreas Mohr
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: e100 kills S2R on my box, plus network drops dead
@ 2009-06-03 6:30 ` Andreas Mohr
0 siblings, 0 replies; 39+ messages in thread
From: Andreas Mohr @ 2009-06-03 6:30 UTC (permalink / raw)
To: andi; +Cc: rjw, e1000-devel, Jeff Kirsher, linux-kernel, netdev
Hi,
On Wed, Jun 03, 2009 at 08:01:23AM +0200, Andreas Mohr wrote:
> IOW, we have _two_ issues:
>
> - that PM suspend part here doesn't support non-PM PCI cards
> - PM suspend breaks networking stuff (or is that caused by incomplete reinitialization of my card,
> thus it's not network-suitable after resume and hangs on some network APIs?)
>
> What to do?
>
> (I should have provided some SysRq-T(?) lock traces I guess, will record that now)
Those were not too useful methinks, but I can provide them if need be.
> Oh, and I will test whether eepro100 S2R works on that machine, and if
> so what that driver does to avoid trouble.
Well, yes, eepro100 (2.6.28.10) does achieve successful S2R,
and I _do_ have working network even after resume (which is not too astonishing
since it almost takes active measures to NOT make this card work,
given that it's fully auto-configuring on the transceiver side)
static int eepro100_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata (pdev);
struct speedo_private *sp = netdev_priv(dev);
void __iomem *ioaddr = sp->regs;
pci_save_state(pdev);
if (!netif_running(dev))
return 0;
del_timer_sync(&sp->timer);
netif_device_detach(dev);
iowrite32(PortPartialReset, ioaddr + SCBPort);
/* XXX call pci_set_power_state ()? */
pci_disable_device(pdev);
pci_set_power_state (pdev, PCI_D3hot);
return 0;
}
That's pretty boring code, linearily executing stuff without checking
results, thus it's unsurprising that it does not prevent suspend
on a non-PM PCI card.
So, what to do to fix those suspend issues on the e100 side of things?
And do we perhaps have similar non-PM PCI card support issues
with other drivers?
Thanks,
Andreas Mohr
------------------------------------------------------------------------------
OpenSolaris 2009.06 is a cutting edge operating system for enterprises
looking to deploy the next generation of Solaris that includes the latest
innovations from Sun and the OpenSource community. Download a copy and
enjoy capabilities such as Networking, Storage and Virtualization.
Go to: http://p.sf.net/sfu/opensolaris-get
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH] Make e100 suspend handler support PCI cards lacking PM capability
2009-06-03 6:30 ` Andreas Mohr
@ 2009-06-13 19:19 ` Andreas Mohr
-1 siblings, 0 replies; 39+ messages in thread
From: Andreas Mohr @ 2009-06-13 19:19 UTC (permalink / raw)
To: andi; +Cc: akpm, e1000-devel, netdev, linux-kernel
Hi all,
after having added non-MII PHY card support to e100, I noticed that
the suspend handler rejects power-management non-capable PCI cards,
causing a S2R request to immediately get back up to the desktop,
losing network access in the process (rtnl mutex deadlock).
ChangeLog:
Support PCI cards which are lacking power management capability
in the e100 suspend handler.
Frankly I was unsure how to best add this to the driver in a clean way.
Usually drivers use pci_set_power_state(..., pci_choose_state(...))
in order to avoid the rejection of an open-coded
pci_set_power_state(..., PCI_D3hot) in case of a non-PM card,
however pci_choose_state() depends on the _pm-internal_ pm_message_t type,
which was doable in .suspend directly but not at the other e100
driver locations where it was used.
Next attempt was to extend __e100_power_off() with a pci_power_t parameter,
however since __e100_power_off() is called by two locations,
that meant that I'd have to use pci_choose_state() at _both_ call sites.
Thus I simply resorted to do a brute-force yet most simple
pci_find_capability() check in the __e100_power_off() function.
Tested on 2.6.30-rc8 and suspending/resuming fine, checkpatch.pl:ed.
Patch against 2.6.30-rc8 with my original non-MII support patch applied.
(should apply fine in any case, I'd think).
Intended for testing in -mmotm or so.
Thanks!
Signed-off-by: Andreas Mohr <andi@lisas.de>
--- linux-2.6.30-rc8.e100/drivers/net/e100.c.my_patch_orig 2009-06-13 18:47:53.000000000 +0200
+++ linux-2.6.30-rc8.e100/drivers/net/e100.c 2009-06-13 20:27:46.000000000 +0200
@@ -2897,6 +2897,13 @@ static void __e100_shutdown(struct pci_d
static int __e100_power_off(struct pci_dev *pdev, bool wake)
{
+ /* some older devices don't support PCI PM
+ * (e.g. mac_82557_D100_B combo card with 80c24 PHY)
+ * - skip those! (they most likely won't support WoL either)
+ */
+ if (!pci_find_capability(pdev, PCI_CAP_ID_PM))
+ return 0;
+
if (wake) {
return pci_prepare_to_sleep(pdev);
} else {
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH] Make e100 suspend handler support PCI cards lacking PM capability
@ 2009-06-13 19:19 ` Andreas Mohr
0 siblings, 0 replies; 39+ messages in thread
From: Andreas Mohr @ 2009-06-13 19:19 UTC (permalink / raw)
To: andi; +Cc: e1000-devel, netdev, akpm, linux-kernel
Hi all,
after having added non-MII PHY card support to e100, I noticed that
the suspend handler rejects power-management non-capable PCI cards,
causing a S2R request to immediately get back up to the desktop,
losing network access in the process (rtnl mutex deadlock).
ChangeLog:
Support PCI cards which are lacking power management capability
in the e100 suspend handler.
Frankly I was unsure how to best add this to the driver in a clean way.
Usually drivers use pci_set_power_state(..., pci_choose_state(...))
in order to avoid the rejection of an open-coded
pci_set_power_state(..., PCI_D3hot) in case of a non-PM card,
however pci_choose_state() depends on the _pm-internal_ pm_message_t type,
which was doable in .suspend directly but not at the other e100
driver locations where it was used.
Next attempt was to extend __e100_power_off() with a pci_power_t parameter,
however since __e100_power_off() is called by two locations,
that meant that I'd have to use pci_choose_state() at _both_ call sites.
Thus I simply resorted to do a brute-force yet most simple
pci_find_capability() check in the __e100_power_off() function.
Tested on 2.6.30-rc8 and suspending/resuming fine, checkpatch.pl:ed.
Patch against 2.6.30-rc8 with my original non-MII support patch applied.
(should apply fine in any case, I'd think).
Intended for testing in -mmotm or so.
Thanks!
Signed-off-by: Andreas Mohr <andi@lisas.de>
--- linux-2.6.30-rc8.e100/drivers/net/e100.c.my_patch_orig 2009-06-13 18:47:53.000000000 +0200
+++ linux-2.6.30-rc8.e100/drivers/net/e100.c 2009-06-13 20:27:46.000000000 +0200
@@ -2897,6 +2897,13 @@ static void __e100_shutdown(struct pci_d
static int __e100_power_off(struct pci_dev *pdev, bool wake)
{
+ /* some older devices don't support PCI PM
+ * (e.g. mac_82557_D100_B combo card with 80c24 PHY)
+ * - skip those! (they most likely won't support WoL either)
+ */
+ if (!pci_find_capability(pdev, PCI_CAP_ID_PM))
+ return 0;
+
if (wake) {
return pci_prepare_to_sleep(pdev);
} else {
------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables unlimited
royalty-free distribution of the report engine for externally facing
server and web deployment.
http://p.sf.net/sfu/businessobjects
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH] Make e100 suspend handler support PCI cards lacking PM capability
2009-06-13 19:19 ` Andreas Mohr
(?)
@ 2009-06-13 22:28 ` Rafael J. Wysocki
2009-06-13 22:45 ` Rafael J. Wysocki
2009-06-14 12:51 ` Andreas Mohr
-1 siblings, 2 replies; 39+ messages in thread
From: Rafael J. Wysocki @ 2009-06-13 22:28 UTC (permalink / raw)
To: andi; +Cc: akpm, e1000-devel, netdev, linux-kernel
On Saturday 13 June 2009, Andreas Mohr wrote:
> Hi all,
>
> after having added non-MII PHY card support to e100, I noticed that
> the suspend handler rejects power-management non-capable PCI cards,
Well, that means we have a bug somewhere in the PCI PM core.
> causing a S2R request to immediately get back up to the desktop,
> losing network access in the process (rtnl mutex deadlock).
That's bad.
>
> ChangeLog:
> Support PCI cards which are lacking power management capability
> in the e100 suspend handler.
>
>
> Frankly I was unsure how to best add this to the driver in a clean way.
> Usually drivers use pci_set_power_state(..., pci_choose_state(...))
> in order to avoid the rejection of an open-coded
> pci_set_power_state(..., PCI_D3hot) in case of a non-PM card,
> however pci_choose_state() depends on the _pm-internal_ pm_message_t type,
> which was doable in .suspend directly but not at the other e100
> driver locations where it was used.
>
> Next attempt was to extend __e100_power_off() with a pci_power_t parameter,
> however since __e100_power_off() is called by two locations,
> that meant that I'd have to use pci_choose_state() at _both_ call sites.
>
> Thus I simply resorted to do a brute-force yet most simple
> pci_find_capability() check in the __e100_power_off() function.
>
>
> Tested on 2.6.30-rc8 and suspending/resuming fine, checkpatch.pl:ed.
> Patch against 2.6.30-rc8 with my original non-MII support patch applied.
> (should apply fine in any case, I'd think).
> Intended for testing in -mmotm or so.
>
> Thanks!
>
> Signed-off-by: Andreas Mohr <andi@lisas.de>
>
>
> --- linux-2.6.30-rc8.e100/drivers/net/e100.c.my_patch_orig 2009-06-13 18:47:53.000000000 +0200
> +++ linux-2.6.30-rc8.e100/drivers/net/e100.c 2009-06-13 20:27:46.000000000 +0200
> @@ -2897,6 +2897,13 @@ static void __e100_shutdown(struct pci_d
>
> static int __e100_power_off(struct pci_dev *pdev, bool wake)
> {
> + /* some older devices don't support PCI PM
> + * (e.g. mac_82557_D100_B combo card with 80c24 PHY)
> + * - skip those! (they most likely won't support WoL either)
> + */
> + if (!pci_find_capability(pdev, PCI_CAP_ID_PM))
> + return 0;
Devices without PCI_CAP_ID_PM may still be power-manageable by ACPI, so
returning 0 at this point is not a general solution.
> +
> if (wake) {
> return pci_prepare_to_sleep(pdev);
pci_prepare_to_sleep() is supposed to return 0 for your device. I'll have a
look at it.
Best,
Rafael
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH] Make e100 suspend handler support PCI cards lacking PM capability
2009-06-13 22:28 ` Rafael J. Wysocki
@ 2009-06-13 22:45 ` Rafael J. Wysocki
2009-06-14 12:51 ` Andreas Mohr
1 sibling, 0 replies; 39+ messages in thread
From: Rafael J. Wysocki @ 2009-06-13 22:45 UTC (permalink / raw)
To: andi; +Cc: akpm, e1000-devel, netdev, linux-kernel
On Sunday 14 June 2009, Rafael J. Wysocki wrote:
> On Saturday 13 June 2009, Andreas Mohr wrote:
> > Hi all,
> >
> > after having added non-MII PHY card support to e100, I noticed that
> > the suspend handler rejects power-management non-capable PCI cards,
>
> Well, that means we have a bug somewhere in the PCI PM core.
>
> > causing a S2R request to immediately get back up to the desktop,
> > losing network access in the process (rtnl mutex deadlock).
>
> That's bad.
>
> >
> > ChangeLog:
> > Support PCI cards which are lacking power management capability
> > in the e100 suspend handler.
> >
> >
> > Frankly I was unsure how to best add this to the driver in a clean way.
> > Usually drivers use pci_set_power_state(..., pci_choose_state(...))
> > in order to avoid the rejection of an open-coded
> > pci_set_power_state(..., PCI_D3hot) in case of a non-PM card,
> > however pci_choose_state() depends on the _pm-internal_ pm_message_t type,
> > which was doable in .suspend directly but not at the other e100
> > driver locations where it was used.
> >
> > Next attempt was to extend __e100_power_off() with a pci_power_t parameter,
> > however since __e100_power_off() is called by two locations,
> > that meant that I'd have to use pci_choose_state() at _both_ call sites.
> >
> > Thus I simply resorted to do a brute-force yet most simple
> > pci_find_capability() check in the __e100_power_off() function.
> >
> >
> > Tested on 2.6.30-rc8 and suspending/resuming fine, checkpatch.pl:ed.
> > Patch against 2.6.30-rc8 with my original non-MII support patch applied.
> > (should apply fine in any case, I'd think).
> > Intended for testing in -mmotm or so.
> >
> > Thanks!
> >
> > Signed-off-by: Andreas Mohr <andi@lisas.de>
> >
> >
> > --- linux-2.6.30-rc8.e100/drivers/net/e100.c.my_patch_orig 2009-06-13 18:47:53.000000000 +0200
> > +++ linux-2.6.30-rc8.e100/drivers/net/e100.c 2009-06-13 20:27:46.000000000 +0200
> > @@ -2897,6 +2897,13 @@ static void __e100_shutdown(struct pci_d
> >
> > static int __e100_power_off(struct pci_dev *pdev, bool wake)
> > {
> > + /* some older devices don't support PCI PM
> > + * (e.g. mac_82557_D100_B combo card with 80c24 PHY)
> > + * - skip those! (they most likely won't support WoL either)
> > + */
> > + if (!pci_find_capability(pdev, PCI_CAP_ID_PM))
> > + return 0;
>
> Devices without PCI_CAP_ID_PM may still be power-manageable by ACPI, so
> returning 0 at this point is not a general solution.
>
> > +
> > if (wake) {
> > return pci_prepare_to_sleep(pdev);
>
> pci_prepare_to_sleep() is supposed to return 0 for your device. I'll have a
> look at it.
Please check if the appended patch helps.
Best,
Rafael
---
drivers/pci/pci.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
Index: linux-2.6/drivers/pci/pci.c
===================================================================
--- linux-2.6.orig/drivers/pci/pci.c
+++ linux-2.6/drivers/pci/pci.c
@@ -1284,15 +1284,14 @@ pci_power_t pci_target_state(struct pci_
default:
target_state = state;
}
+ } else if (!dev->pm_cap) {
+ target_state = PCI_D0;
} else if (device_may_wakeup(&dev->dev)) {
/*
* Find the deepest state from which the device can generate
* wake-up events, make it the target state and enable device
* to generate PME#.
*/
- if (!dev->pm_cap)
- return PCI_POWER_ERROR;
-
if (dev->pme_support) {
while (target_state
&& !(dev->pme_support & (1 << target_state)))
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH] Make e100 suspend handler support PCI cards lacking PM capability
@ 2009-06-13 22:45 ` Rafael J. Wysocki
0 siblings, 0 replies; 39+ messages in thread
From: Rafael J. Wysocki @ 2009-06-13 22:45 UTC (permalink / raw)
To: andi; +Cc: e1000-devel, netdev, akpm, linux-kernel
On Sunday 14 June 2009, Rafael J. Wysocki wrote:
> On Saturday 13 June 2009, Andreas Mohr wrote:
> > Hi all,
> >
> > after having added non-MII PHY card support to e100, I noticed that
> > the suspend handler rejects power-management non-capable PCI cards,
>
> Well, that means we have a bug somewhere in the PCI PM core.
>
> > causing a S2R request to immediately get back up to the desktop,
> > losing network access in the process (rtnl mutex deadlock).
>
> That's bad.
>
> >
> > ChangeLog:
> > Support PCI cards which are lacking power management capability
> > in the e100 suspend handler.
> >
> >
> > Frankly I was unsure how to best add this to the driver in a clean way.
> > Usually drivers use pci_set_power_state(..., pci_choose_state(...))
> > in order to avoid the rejection of an open-coded
> > pci_set_power_state(..., PCI_D3hot) in case of a non-PM card,
> > however pci_choose_state() depends on the _pm-internal_ pm_message_t type,
> > which was doable in .suspend directly but not at the other e100
> > driver locations where it was used.
> >
> > Next attempt was to extend __e100_power_off() with a pci_power_t parameter,
> > however since __e100_power_off() is called by two locations,
> > that meant that I'd have to use pci_choose_state() at _both_ call sites.
> >
> > Thus I simply resorted to do a brute-force yet most simple
> > pci_find_capability() check in the __e100_power_off() function.
> >
> >
> > Tested on 2.6.30-rc8 and suspending/resuming fine, checkpatch.pl:ed.
> > Patch against 2.6.30-rc8 with my original non-MII support patch applied.
> > (should apply fine in any case, I'd think).
> > Intended for testing in -mmotm or so.
> >
> > Thanks!
> >
> > Signed-off-by: Andreas Mohr <andi@lisas.de>
> >
> >
> > --- linux-2.6.30-rc8.e100/drivers/net/e100.c.my_patch_orig 2009-06-13 18:47:53.000000000 +0200
> > +++ linux-2.6.30-rc8.e100/drivers/net/e100.c 2009-06-13 20:27:46.000000000 +0200
> > @@ -2897,6 +2897,13 @@ static void __e100_shutdown(struct pci_d
> >
> > static int __e100_power_off(struct pci_dev *pdev, bool wake)
> > {
> > + /* some older devices don't support PCI PM
> > + * (e.g. mac_82557_D100_B combo card with 80c24 PHY)
> > + * - skip those! (they most likely won't support WoL either)
> > + */
> > + if (!pci_find_capability(pdev, PCI_CAP_ID_PM))
> > + return 0;
>
> Devices without PCI_CAP_ID_PM may still be power-manageable by ACPI, so
> returning 0 at this point is not a general solution.
>
> > +
> > if (wake) {
> > return pci_prepare_to_sleep(pdev);
>
> pci_prepare_to_sleep() is supposed to return 0 for your device. I'll have a
> look at it.
Please check if the appended patch helps.
Best,
Rafael
---
drivers/pci/pci.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
Index: linux-2.6/drivers/pci/pci.c
===================================================================
--- linux-2.6.orig/drivers/pci/pci.c
+++ linux-2.6/drivers/pci/pci.c
@@ -1284,15 +1284,14 @@ pci_power_t pci_target_state(struct pci_
default:
target_state = state;
}
+ } else if (!dev->pm_cap) {
+ target_state = PCI_D0;
} else if (device_may_wakeup(&dev->dev)) {
/*
* Find the deepest state from which the device can generate
* wake-up events, make it the target state and enable device
* to generate PME#.
*/
- if (!dev->pm_cap)
- return PCI_POWER_ERROR;
-
if (dev->pme_support) {
while (target_state
&& !(dev->pme_support & (1 << target_state)))
------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables unlimited
royalty-free distribution of the report engine for externally facing
server and web deployment.
http://p.sf.net/sfu/businessobjects
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH] Make e100 suspend handler support PCI cards lacking PM capability
2009-06-13 22:28 ` Rafael J. Wysocki
2009-06-13 22:45 ` Rafael J. Wysocki
@ 2009-06-14 12:51 ` Andreas Mohr
2009-06-14 14:06 ` Rafael J. Wysocki
1 sibling, 1 reply; 39+ messages in thread
From: Andreas Mohr @ 2009-06-14 12:51 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: andi, akpm, e1000-devel, netdev, linux-kernel
Hi,
On Sun, Jun 14, 2009 at 12:28:15AM +0200, Rafael J. Wysocki wrote:
> On Saturday 13 June 2009, Andreas Mohr wrote:
> > Hi all,
> >
> > after having added non-MII PHY card support to e100, I noticed that
> > the suspend handler rejects power-management non-capable PCI cards,
>
> Well, that means we have a bug somewhere in the PCI PM core.
I don't know. I had shortly investigated the same thing,
but it very much seemed that this is by design, pci_set_power_state()
is documented to reject non-PM cards (in power/pci.txt, and in
pci.c, too). Thus I didn't work in this area.
And from a cleanliness point of view pci_set_power_state()
acting on a non-PM card with no special non-PM ACPI support _should_
return an error status I guess.
(especially since docs say that pci_set_power_state() should
be used for PM cards)
> > causing a S2R request to immediately get back up to the desktop,
> > losing network access in the process (rtnl mutex deadlock).
>
> That's bad.
Indeed, and I have no idea what the problem was.
rtnl_is_locked() always was false within suspend/resume,
thus it had to be a userspace-triggered effect sometime
_after_ (non-)resume happened
(probably due to the network controller being down and thus inoperable
after .suspend).
BTW, after that failed .suspend, .resume was not called. I assume this to
be correct behaviour.
> > static int __e100_power_off(struct pci_dev *pdev, bool wake)
> > {
> > + /* some older devices don't support PCI PM
> > + * (e.g. mac_82557_D100_B combo card with 80c24 PHY)
> > + * - skip those! (they most likely won't support WoL either)
> > + */
> > + if (!pci_find_capability(pdev, PCI_CAP_ID_PM))
> > + return 0;
>
> Devices without PCI_CAP_ID_PM may still be power-manageable by ACPI, so
> returning 0 at this point is not a general solution.
Oh, interesting.
BTW, any idea why we have several drivers doing some seemingly useless
/* Find power-management capability. */
pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
if (pm_cap == 0) {
printk(KERN_ERR PFX "Cannot find PowerManagement capability, "
"aborting.\n");
err = -EIO;
goto err_out_free_res;
}
?
- it's code bloat
- it needlessly rejects non-PM cards
- it annoys the hell out of users of a non-PM card
> > +
> > if (wake) {
> > return pci_prepare_to_sleep(pdev);
>
> pci_prepare_to_sleep() is supposed to return 0 for your device. I'll have a
> look at it.
No, wake is false for my card, thus that's not the branch to
investigate.
And that's probably the reason why the patch in the next mail
didn't work.
(I #if 0'ed my e100 changes, and then patched pci.c,
and it did properly contain the patched parts,
and the kernel rebuild then failed to suspend)
pci_legacy_suspend(): e100_suspend+0x0/0x20 [e100] returns -5
pm_op(): pci_pm_suspend+0x0/0xd7 returns -5
PM: Device 0000:02:07.0 failed to suspend: error -5
PM: Some devices failed to suspend
Most likely your patch didn't change pci_set_power_state() processing,
I'd think.
Now what to do next?
Note that I won't be able to test anything for about a week now,
unfortunately.
Thanks for your info!
Andreas Mohr
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH] Make e100 suspend handler support PCI cards lacking PM capability
2009-06-14 12:51 ` Andreas Mohr
@ 2009-06-14 14:06 ` Rafael J. Wysocki
0 siblings, 0 replies; 39+ messages in thread
From: Rafael J. Wysocki @ 2009-06-14 14:06 UTC (permalink / raw)
To: andi; +Cc: akpm, e1000-devel, netdev, linux-kernel
On Sunday 14 June 2009, Andreas Mohr wrote:
> Hi,
>
> On Sun, Jun 14, 2009 at 12:28:15AM +0200, Rafael J. Wysocki wrote:
> > On Saturday 13 June 2009, Andreas Mohr wrote:
> > > Hi all,
> > >
> > > after having added non-MII PHY card support to e100, I noticed that
> > > the suspend handler rejects power-management non-capable PCI cards,
> >
> > Well, that means we have a bug somewhere in the PCI PM core.
>
> I don't know. I had shortly investigated the same thing,
> but it very much seemed that this is by design, pci_set_power_state()
> is documented to reject non-PM cards (in power/pci.txt, and in
> pci.c, too). Thus I didn't work in this area.
>
> And from a cleanliness point of view pci_set_power_state()
> acting on a non-PM card with no special non-PM ACPI support _should_
> return an error status I guess.
> (especially since docs say that pci_set_power_state() should
> be used for PM cards)
>
> > > causing a S2R request to immediately get back up to the desktop,
> > > losing network access in the process (rtnl mutex deadlock).
> >
> > That's bad.
>
> Indeed, and I have no idea what the problem was.
> rtnl_is_locked() always was false within suspend/resume,
> thus it had to be a userspace-triggered effect sometime
> _after_ (non-)resume happened
> (probably due to the network controller being down and thus inoperable
> after .suspend).
>
> BTW, after that failed .suspend, .resume was not called. I assume this to
> be correct behaviour.
>
> > > static int __e100_power_off(struct pci_dev *pdev, bool wake)
> > > {
> > > + /* some older devices don't support PCI PM
> > > + * (e.g. mac_82557_D100_B combo card with 80c24 PHY)
> > > + * - skip those! (they most likely won't support WoL either)
> > > + */
> > > + if (!pci_find_capability(pdev, PCI_CAP_ID_PM))
> > > + return 0;
> >
> > Devices without PCI_CAP_ID_PM may still be power-manageable by ACPI, so
> > returning 0 at this point is not a general solution.
>
> Oh, interesting.
>
> BTW, any idea why we have several drivers doing some seemingly useless
>
> /* Find power-management capability. */
> pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
> if (pm_cap == 0) {
> printk(KERN_ERR PFX "Cannot find PowerManagement capability, "
> "aborting.\n");
> err = -EIO;
> goto err_out_free_res;
> }
>
> ?
>
> - it's code bloat
> - it needlessly rejects non-PM cards
> - it annoys the hell out of users of a non-PM card
No idea.
> > > +
> > > if (wake) {
> > > return pci_prepare_to_sleep(pdev);
> >
> > pci_prepare_to_sleep() is supposed to return 0 for your device. I'll have a
> > look at it.
>
> No, wake is false for my card, thus that's not the branch to
> investigate.
Ah. The problem is, then, that we try to put the device into D3, which it
cannot do and error code is correctly returned from pci_set_power_state().
I would use the appended patch in that case and the patch sent previously
is necessary for the 'wake = true' case.
Thanks,
Rafael
---
drivers/net/e100.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
Index: linux-2.6/drivers/net/e100.c
===================================================================
--- linux-2.6.orig/drivers/net/e100.c
+++ linux-2.6/drivers/net/e100.c
@@ -2763,8 +2763,9 @@ static int __e100_power_off(struct pci_d
return pci_prepare_to_sleep(pdev);
} else {
pci_wake_from_d3(pdev, false);
- return pci_set_power_state(pdev, PCI_D3hot);
+ pci_set_power_state(pdev, PCI_D3hot);
}
+ return 0;
}
#ifdef CONFIG_PM
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH] Make e100 suspend handler support PCI cards lacking PM capability
@ 2009-06-14 14:06 ` Rafael J. Wysocki
0 siblings, 0 replies; 39+ messages in thread
From: Rafael J. Wysocki @ 2009-06-14 14:06 UTC (permalink / raw)
To: andi; +Cc: e1000-devel, netdev, akpm, linux-kernel
On Sunday 14 June 2009, Andreas Mohr wrote:
> Hi,
>
> On Sun, Jun 14, 2009 at 12:28:15AM +0200, Rafael J. Wysocki wrote:
> > On Saturday 13 June 2009, Andreas Mohr wrote:
> > > Hi all,
> > >
> > > after having added non-MII PHY card support to e100, I noticed that
> > > the suspend handler rejects power-management non-capable PCI cards,
> >
> > Well, that means we have a bug somewhere in the PCI PM core.
>
> I don't know. I had shortly investigated the same thing,
> but it very much seemed that this is by design, pci_set_power_state()
> is documented to reject non-PM cards (in power/pci.txt, and in
> pci.c, too). Thus I didn't work in this area.
>
> And from a cleanliness point of view pci_set_power_state()
> acting on a non-PM card with no special non-PM ACPI support _should_
> return an error status I guess.
> (especially since docs say that pci_set_power_state() should
> be used for PM cards)
>
> > > causing a S2R request to immediately get back up to the desktop,
> > > losing network access in the process (rtnl mutex deadlock).
> >
> > That's bad.
>
> Indeed, and I have no idea what the problem was.
> rtnl_is_locked() always was false within suspend/resume,
> thus it had to be a userspace-triggered effect sometime
> _after_ (non-)resume happened
> (probably due to the network controller being down and thus inoperable
> after .suspend).
>
> BTW, after that failed .suspend, .resume was not called. I assume this to
> be correct behaviour.
>
> > > static int __e100_power_off(struct pci_dev *pdev, bool wake)
> > > {
> > > + /* some older devices don't support PCI PM
> > > + * (e.g. mac_82557_D100_B combo card with 80c24 PHY)
> > > + * - skip those! (they most likely won't support WoL either)
> > > + */
> > > + if (!pci_find_capability(pdev, PCI_CAP_ID_PM))
> > > + return 0;
> >
> > Devices without PCI_CAP_ID_PM may still be power-manageable by ACPI, so
> > returning 0 at this point is not a general solution.
>
> Oh, interesting.
>
> BTW, any idea why we have several drivers doing some seemingly useless
>
> /* Find power-management capability. */
> pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
> if (pm_cap == 0) {
> printk(KERN_ERR PFX "Cannot find PowerManagement capability, "
> "aborting.\n");
> err = -EIO;
> goto err_out_free_res;
> }
>
> ?
>
> - it's code bloat
> - it needlessly rejects non-PM cards
> - it annoys the hell out of users of a non-PM card
No idea.
> > > +
> > > if (wake) {
> > > return pci_prepare_to_sleep(pdev);
> >
> > pci_prepare_to_sleep() is supposed to return 0 for your device. I'll have a
> > look at it.
>
> No, wake is false for my card, thus that's not the branch to
> investigate.
Ah. The problem is, then, that we try to put the device into D3, which it
cannot do and error code is correctly returned from pci_set_power_state().
I would use the appended patch in that case and the patch sent previously
is necessary for the 'wake = true' case.
Thanks,
Rafael
---
drivers/net/e100.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
Index: linux-2.6/drivers/net/e100.c
===================================================================
--- linux-2.6.orig/drivers/net/e100.c
+++ linux-2.6/drivers/net/e100.c
@@ -2763,8 +2763,9 @@ static int __e100_power_off(struct pci_d
return pci_prepare_to_sleep(pdev);
} else {
pci_wake_from_d3(pdev, false);
- return pci_set_power_state(pdev, PCI_D3hot);
+ pci_set_power_state(pdev, PCI_D3hot);
}
+ return 0;
}
#ifdef CONFIG_PM
------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables unlimited
royalty-free distribution of the report engine for externally facing
server and web deployment.
http://p.sf.net/sfu/businessobjects
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH] Make e100 suspend handler support PCI cards lacking PM capability
2009-06-14 14:06 ` Rafael J. Wysocki
(?)
@ 2009-06-14 16:31 ` Rafael J. Wysocki
-1 siblings, 0 replies; 39+ messages in thread
From: Rafael J. Wysocki @ 2009-06-14 16:31 UTC (permalink / raw)
To: andi; +Cc: akpm, e1000-devel, netdev, linux-kernel
On Sunday 14 June 2009, Rafael J. Wysocki wrote:
> On Sunday 14 June 2009, Andreas Mohr wrote:
> > Hi,
> >
> > On Sun, Jun 14, 2009 at 12:28:15AM +0200, Rafael J. Wysocki wrote:
> > > On Saturday 13 June 2009, Andreas Mohr wrote:
> > > > Hi all,
> > > >
> > > > after having added non-MII PHY card support to e100, I noticed that
> > > > the suspend handler rejects power-management non-capable PCI cards,
> > >
> > > Well, that means we have a bug somewhere in the PCI PM core.
> >
> > I don't know. I had shortly investigated the same thing,
> > but it very much seemed that this is by design, pci_set_power_state()
> > is documented to reject non-PM cards (in power/pci.txt, and in
> > pci.c, too). Thus I didn't work in this area.
> >
> > And from a cleanliness point of view pci_set_power_state()
> > acting on a non-PM card with no special non-PM ACPI support _should_
> > return an error status I guess.
> > (especially since docs say that pci_set_power_state() should
> > be used for PM cards)
> >
> > > > causing a S2R request to immediately get back up to the desktop,
> > > > losing network access in the process (rtnl mutex deadlock).
> > >
> > > That's bad.
> >
> > Indeed, and I have no idea what the problem was.
> > rtnl_is_locked() always was false within suspend/resume,
> > thus it had to be a userspace-triggered effect sometime
> > _after_ (non-)resume happened
> > (probably due to the network controller being down and thus inoperable
> > after .suspend).
> >
> > BTW, after that failed .suspend, .resume was not called. I assume this to
> > be correct behaviour.
> >
> > > > static int __e100_power_off(struct pci_dev *pdev, bool wake)
> > > > {
> > > > + /* some older devices don't support PCI PM
> > > > + * (e.g. mac_82557_D100_B combo card with 80c24 PHY)
> > > > + * - skip those! (they most likely won't support WoL either)
> > > > + */
> > > > + if (!pci_find_capability(pdev, PCI_CAP_ID_PM))
> > > > + return 0;
> > >
> > > Devices without PCI_CAP_ID_PM may still be power-manageable by ACPI, so
> > > returning 0 at this point is not a general solution.
> >
> > Oh, interesting.
> >
> > BTW, any idea why we have several drivers doing some seemingly useless
> >
> > /* Find power-management capability. */
> > pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
> > if (pm_cap == 0) {
> > printk(KERN_ERR PFX "Cannot find PowerManagement capability, "
> > "aborting.\n");
> > err = -EIO;
> > goto err_out_free_res;
> > }
> >
> > ?
> >
> > - it's code bloat
> > - it needlessly rejects non-PM cards
> > - it annoys the hell out of users of a non-PM card
>
> No idea.
>
> > > > +
> > > > if (wake) {
> > > > return pci_prepare_to_sleep(pdev);
> > >
> > > pci_prepare_to_sleep() is supposed to return 0 for your device. I'll have a
> > > look at it.
> >
> > No, wake is false for my card, thus that's not the branch to
> > investigate.
>
> Ah. The problem is, then, that we try to put the device into D3, which it
> cannot do and error code is correctly returned from pci_set_power_state().
>
> I would use the appended patch.
Or perhaps better this one (functionally equivalent).
---
drivers/net/e100.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
Index: linux-2.6/drivers/net/e100.c
===================================================================
--- linux-2.6.orig/drivers/net/e100.c
+++ linux-2.6/drivers/net/e100.c
@@ -2759,12 +2759,13 @@ static void __e100_shutdown(struct pci_d
static int __e100_power_off(struct pci_dev *pdev, bool wake)
{
- if (wake) {
+ if (wake)
return pci_prepare_to_sleep(pdev);
- } else {
- pci_wake_from_d3(pdev, false);
- return pci_set_power_state(pdev, PCI_D3hot);
- }
+
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
}
#ifdef CONFIG_PM
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH] Make e100 suspend handler support PCI cards lacking PM capability
2009-06-14 14:06 ` Rafael J. Wysocki
@ 2009-06-14 16:46 ` Andreas Mohr
-1 siblings, 0 replies; 39+ messages in thread
From: Andreas Mohr @ 2009-06-14 16:46 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: andi, akpm, e1000-devel, netdev, linux-kernel
Hi,
On Sun, Jun 14, 2009 at 04:06:29PM +0200, Rafael J. Wysocki wrote:
> On Sunday 14 June 2009, Andreas Mohr wrote:
> > Hi,
> >
> > On Sun, Jun 14, 2009 at 12:28:15AM +0200, Rafael J. Wysocki wrote:
> > > On Saturday 13 June 2009, Andreas Mohr wrote:
> > > > +
> > > > if (wake) {
> > > > return pci_prepare_to_sleep(pdev);
> > >
> > > pci_prepare_to_sleep() is supposed to return 0 for your device. I'll have a
> > > look at it.
> >
> > No, wake is false for my card, thus that's not the branch to
> > investigate.
>
> Ah. The problem is, then, that we try to put the device into D3, which it
> cannot do and error code is correctly returned from pci_set_power_state().
>
> I would use the appended patch in that case and the patch sent previously
> is necessary for the 'wake = true' case.
OK, as said I cannot test this right now, but I'm _damn_ sure it would
work. Thus I'd say your equivalent patch posted a bit later can be
committed already.
But what about the wake = true case?
I'm not affected by this since my card doesn't have any wake capa,
thus it's your call of whether that pci core code part really was broken
and needed fixing.
So, for the patch in your next mail:
Acked-by: Andreas Mohr <andi@lisas.de>
BTW, that patch was (pasted):
static int __e100_power_off(struct pci_dev *pdev, bool wake)
{
- if (wake) {
+ if (wake)
return pci_prepare_to_sleep(pdev);
- } else {
- pci_wake_from_d3(pdev, false);
- return pci_set_power_state(pdev, PCI_D3hot);
- }
+
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
}
Couple questions still:
- why do we call pci_wake_from_d3(...false) only!?
Wouldn't this break WoL after one iteration back and forth,
due to missing 'true' case?
- why do we call netif_device_detach() _after_ doing hardware shutdown
of the network controller? I'd guess this can cause huge issues?
Someone told me he had rtnl lock issues upon S2D with e100
(very similar to my rtnl issues during aborted .suspend),
and that might possibly be the reason?
So few lines of code, so many questions...
Thanks,
Andreas Mohr
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH] Make e100 suspend handler support PCI cards lacking PM capability
@ 2009-06-14 16:46 ` Andreas Mohr
0 siblings, 0 replies; 39+ messages in thread
From: Andreas Mohr @ 2009-06-14 16:46 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: e1000-devel, netdev, akpm, linux-kernel, andi
Hi,
On Sun, Jun 14, 2009 at 04:06:29PM +0200, Rafael J. Wysocki wrote:
> On Sunday 14 June 2009, Andreas Mohr wrote:
> > Hi,
> >
> > On Sun, Jun 14, 2009 at 12:28:15AM +0200, Rafael J. Wysocki wrote:
> > > On Saturday 13 June 2009, Andreas Mohr wrote:
> > > > +
> > > > if (wake) {
> > > > return pci_prepare_to_sleep(pdev);
> > >
> > > pci_prepare_to_sleep() is supposed to return 0 for your device. I'll have a
> > > look at it.
> >
> > No, wake is false for my card, thus that's not the branch to
> > investigate.
>
> Ah. The problem is, then, that we try to put the device into D3, which it
> cannot do and error code is correctly returned from pci_set_power_state().
>
> I would use the appended patch in that case and the patch sent previously
> is necessary for the 'wake = true' case.
OK, as said I cannot test this right now, but I'm _damn_ sure it would
work. Thus I'd say your equivalent patch posted a bit later can be
committed already.
But what about the wake = true case?
I'm not affected by this since my card doesn't have any wake capa,
thus it's your call of whether that pci core code part really was broken
and needed fixing.
So, for the patch in your next mail:
Acked-by: Andreas Mohr <andi@lisas.de>
BTW, that patch was (pasted):
static int __e100_power_off(struct pci_dev *pdev, bool wake)
{
- if (wake) {
+ if (wake)
return pci_prepare_to_sleep(pdev);
- } else {
- pci_wake_from_d3(pdev, false);
- return pci_set_power_state(pdev, PCI_D3hot);
- }
+
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
}
Couple questions still:
- why do we call pci_wake_from_d3(...false) only!?
Wouldn't this break WoL after one iteration back and forth,
due to missing 'true' case?
- why do we call netif_device_detach() _after_ doing hardware shutdown
of the network controller? I'd guess this can cause huge issues?
Someone told me he had rtnl lock issues upon S2D with e100
(very similar to my rtnl issues during aborted .suspend),
and that might possibly be the reason?
So few lines of code, so many questions...
Thanks,
Andreas Mohr
------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables unlimited
royalty-free distribution of the report engine for externally facing
server and web deployment.
http://p.sf.net/sfu/businessobjects
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH] Make e100 suspend handler support PCI cards lacking PM capability
2009-06-14 16:46 ` Andreas Mohr
@ 2009-06-14 17:09 ` Rafael J. Wysocki
-1 siblings, 0 replies; 39+ messages in thread
From: Rafael J. Wysocki @ 2009-06-14 17:09 UTC (permalink / raw)
To: andi; +Cc: akpm, e1000-devel, netdev, linux-kernel
On Sunday 14 June 2009, Andreas Mohr wrote:
> Hi,
>
> On Sun, Jun 14, 2009 at 04:06:29PM +0200, Rafael J. Wysocki wrote:
> > On Sunday 14 June 2009, Andreas Mohr wrote:
> > > Hi,
> > >
> > > On Sun, Jun 14, 2009 at 12:28:15AM +0200, Rafael J. Wysocki wrote:
> > > > On Saturday 13 June 2009, Andreas Mohr wrote:
> > > > > +
> > > > > if (wake) {
> > > > > return pci_prepare_to_sleep(pdev);
> > > >
> > > > pci_prepare_to_sleep() is supposed to return 0 for your device. I'll have a
> > > > look at it.
> > >
> > > No, wake is false for my card, thus that's not the branch to
> > > investigate.
> >
> > Ah. The problem is, then, that we try to put the device into D3, which it
> > cannot do and error code is correctly returned from pci_set_power_state().
> >
> > I would use the appended patch in that case and the patch sent previously
> > is necessary for the 'wake = true' case.
>
> OK, as said I cannot test this right now, but I'm _damn_ sure it would
> work. Thus I'd say your equivalent patch posted a bit later can be
> committed already.
>
> But what about the wake = true case?
> I'm not affected by this since my card doesn't have any wake capa,
> thus it's your call of whether that pci core code part really was broken
> and needed fixing.
I think it needs fixing.
> So, for the patch in your next mail:
> Acked-by: Andreas Mohr <andi@lisas.de>
>
>
> BTW, that patch was (pasted):
>
> static int __e100_power_off(struct pci_dev *pdev, bool wake)
> {
> - if (wake) {
> + if (wake)
> return pci_prepare_to_sleep(pdev);
> - } else {
> - pci_wake_from_d3(pdev, false);
> - return pci_set_power_state(pdev, PCI_D3hot);
> - }
> +
> + pci_wake_from_d3(pdev, false);
> + pci_set_power_state(pdev, PCI_D3hot);
> +
> + return 0;
> }
>
>
> Couple questions still:
> - why do we call pci_wake_from_d3(...false) only!?
> Wouldn't this break WoL after one iteration back and forth,
> due to missing 'true' case?
The 'true' case is the 'wake = true' one.
> - why do we call netif_device_detach() _after_ doing hardware shutdown
> of the network controller? I'd guess this can cause huge issues?
> Someone told me he had rtnl lock issues upon S2D with e100
> (very similar to my rtnl issues during aborted .suspend),
> and that might possibly be the reason?
I think you're right, but I'm not a network driver expert.
Perhaps you can change the ordering and see if that fixes the rtnl issue
(since you're able to reproduce it without my patch, that should be easy to
verify).
Best,
Rafael
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH] Make e100 suspend handler support PCI cards lacking PM capability
@ 2009-06-14 17:09 ` Rafael J. Wysocki
0 siblings, 0 replies; 39+ messages in thread
From: Rafael J. Wysocki @ 2009-06-14 17:09 UTC (permalink / raw)
To: andi; +Cc: e1000-devel, netdev, akpm, linux-kernel
On Sunday 14 June 2009, Andreas Mohr wrote:
> Hi,
>
> On Sun, Jun 14, 2009 at 04:06:29PM +0200, Rafael J. Wysocki wrote:
> > On Sunday 14 June 2009, Andreas Mohr wrote:
> > > Hi,
> > >
> > > On Sun, Jun 14, 2009 at 12:28:15AM +0200, Rafael J. Wysocki wrote:
> > > > On Saturday 13 June 2009, Andreas Mohr wrote:
> > > > > +
> > > > > if (wake) {
> > > > > return pci_prepare_to_sleep(pdev);
> > > >
> > > > pci_prepare_to_sleep() is supposed to return 0 for your device. I'll have a
> > > > look at it.
> > >
> > > No, wake is false for my card, thus that's not the branch to
> > > investigate.
> >
> > Ah. The problem is, then, that we try to put the device into D3, which it
> > cannot do and error code is correctly returned from pci_set_power_state().
> >
> > I would use the appended patch in that case and the patch sent previously
> > is necessary for the 'wake = true' case.
>
> OK, as said I cannot test this right now, but I'm _damn_ sure it would
> work. Thus I'd say your equivalent patch posted a bit later can be
> committed already.
>
> But what about the wake = true case?
> I'm not affected by this since my card doesn't have any wake capa,
> thus it's your call of whether that pci core code part really was broken
> and needed fixing.
I think it needs fixing.
> So, for the patch in your next mail:
> Acked-by: Andreas Mohr <andi@lisas.de>
>
>
> BTW, that patch was (pasted):
>
> static int __e100_power_off(struct pci_dev *pdev, bool wake)
> {
> - if (wake) {
> + if (wake)
> return pci_prepare_to_sleep(pdev);
> - } else {
> - pci_wake_from_d3(pdev, false);
> - return pci_set_power_state(pdev, PCI_D3hot);
> - }
> +
> + pci_wake_from_d3(pdev, false);
> + pci_set_power_state(pdev, PCI_D3hot);
> +
> + return 0;
> }
>
>
> Couple questions still:
> - why do we call pci_wake_from_d3(...false) only!?
> Wouldn't this break WoL after one iteration back and forth,
> due to missing 'true' case?
The 'true' case is the 'wake = true' one.
> - why do we call netif_device_detach() _after_ doing hardware shutdown
> of the network controller? I'd guess this can cause huge issues?
> Someone told me he had rtnl lock issues upon S2D with e100
> (very similar to my rtnl issues during aborted .suspend),
> and that might possibly be the reason?
I think you're right, but I'm not a network driver expert.
Perhaps you can change the ordering and see if that fixes the rtnl issue
(since you're able to reproduce it without my patch, that should be easy to
verify).
Best,
Rafael
------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables unlimited
royalty-free distribution of the report engine for externally facing
server and web deployment.
http://p.sf.net/sfu/businessobjects
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH] Make e100 suspend handler support PCI cards lacking PM capability
2009-06-14 17:09 ` Rafael J. Wysocki
@ 2009-06-14 17:20 ` Andreas Mohr
-1 siblings, 0 replies; 39+ messages in thread
From: Andreas Mohr @ 2009-06-14 17:20 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: andi, akpm, e1000-devel, netdev, linux-kernel
Hi,
On Sun, Jun 14, 2009 at 07:09:45PM +0200, Rafael J. Wysocki wrote:
> On Sunday 14 June 2009, Andreas Mohr wrote:
> > Couple questions still:
> > - why do we call pci_wake_from_d3(...false) only!?
> > Wouldn't this break WoL after one iteration back and forth,
> > due to missing 'true' case?
>
> The 'true' case is the 'wake = true' one.
OK, so it wasn't an explicit pci_wake_from_d3(...true), but the
operations done there are the equivalent of it probably.
> > - why do we call netif_device_detach() _after_ doing hardware shutdown
> > of the network controller? I'd guess this can cause huge issues?
> > Someone told me he had rtnl lock issues upon S2D with e100
> > (very similar to my rtnl issues during aborted .suspend),
> > and that might possibly be the reason?
>
> I think you're right, but I'm not a network driver expert.
>
> Perhaps you can change the ordering and see if that fixes the rtnl issue
> (since you're able to reproduce it without my patch, that should be easy to
> verify).
I'll test this - later.
Thanks a lot,
Andreas Mohr
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH] Make e100 suspend handler support PCI cards lacking PM capability
@ 2009-06-14 17:20 ` Andreas Mohr
0 siblings, 0 replies; 39+ messages in thread
From: Andreas Mohr @ 2009-06-14 17:20 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: e1000-devel, netdev, akpm, linux-kernel, andi
Hi,
On Sun, Jun 14, 2009 at 07:09:45PM +0200, Rafael J. Wysocki wrote:
> On Sunday 14 June 2009, Andreas Mohr wrote:
> > Couple questions still:
> > - why do we call pci_wake_from_d3(...false) only!?
> > Wouldn't this break WoL after one iteration back and forth,
> > due to missing 'true' case?
>
> The 'true' case is the 'wake = true' one.
OK, so it wasn't an explicit pci_wake_from_d3(...true), but the
operations done there are the equivalent of it probably.
> > - why do we call netif_device_detach() _after_ doing hardware shutdown
> > of the network controller? I'd guess this can cause huge issues?
> > Someone told me he had rtnl lock issues upon S2D with e100
> > (very similar to my rtnl issues during aborted .suspend),
> > and that might possibly be the reason?
>
> I think you're right, but I'm not a network driver expert.
>
> Perhaps you can change the ordering and see if that fixes the rtnl issue
> (since you're able to reproduce it without my patch, that should be easy to
> verify).
I'll test this - later.
Thanks a lot,
Andreas Mohr
------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables unlimited
royalty-free distribution of the report engine for externally facing
server and web deployment.
http://p.sf.net/sfu/businessobjects
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH] Net / e100: Fix suspend of devices that cannot be power managed
2009-06-14 16:46 ` Andreas Mohr
@ 2009-06-14 19:46 ` Rafael J. Wysocki
-1 siblings, 0 replies; 39+ messages in thread
From: Rafael J. Wysocki @ 2009-06-14 19:46 UTC (permalink / raw)
To: Jeffrey Kirsher; +Cc: andi, akpm, e1000-devel, netdev, linux-kernel
From: Rafael J. Wysocki <rjw@sisk.pl>
If the adapter is not power-manageable using either ACPI, or the
native PCI PM interface, __e100_power_off() returns error code, which
causes every attempt to suspend to fail, although it should return 0
in such a case. Fix this problem by ignoring the return value of
pci_set_power_state() in __e100_power_off().
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Andreas Mohr <andi@lisas.de>
---
drivers/net/e100.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
Index: linux-2.6/drivers/net/e100.c
===================================================================
--- linux-2.6.orig/drivers/net/e100.c
+++ linux-2.6/drivers/net/e100.c
@@ -2759,12 +2759,13 @@ static void __e100_shutdown(struct pci_d
static int __e100_power_off(struct pci_dev *pdev, bool wake)
{
- if (wake) {
+ if (wake)
return pci_prepare_to_sleep(pdev);
- } else {
- pci_wake_from_d3(pdev, false);
- return pci_set_power_state(pdev, PCI_D3hot);
- }
+
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
}
#ifdef CONFIG_PM
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH] Net / e100: Fix suspend of devices that cannot be power managed
@ 2009-06-14 19:46 ` Rafael J. Wysocki
0 siblings, 0 replies; 39+ messages in thread
From: Rafael J. Wysocki @ 2009-06-14 19:46 UTC (permalink / raw)
To: Jeffrey Kirsher; +Cc: e1000-devel, netdev, akpm, linux-kernel, andi
From: Rafael J. Wysocki <rjw@sisk.pl>
If the adapter is not power-manageable using either ACPI, or the
native PCI PM interface, __e100_power_off() returns error code, which
causes every attempt to suspend to fail, although it should return 0
in such a case. Fix this problem by ignoring the return value of
pci_set_power_state() in __e100_power_off().
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Andreas Mohr <andi@lisas.de>
---
drivers/net/e100.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
Index: linux-2.6/drivers/net/e100.c
===================================================================
--- linux-2.6.orig/drivers/net/e100.c
+++ linux-2.6/drivers/net/e100.c
@@ -2759,12 +2759,13 @@ static void __e100_shutdown(struct pci_d
static int __e100_power_off(struct pci_dev *pdev, bool wake)
{
- if (wake) {
+ if (wake)
return pci_prepare_to_sleep(pdev);
- } else {
- pci_wake_from_d3(pdev, false);
- return pci_set_power_state(pdev, PCI_D3hot);
- }
+
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
}
#ifdef CONFIG_PM
------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables unlimited
royalty-free distribution of the report engine for externally facing
server and web deployment.
http://p.sf.net/sfu/businessobjects
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH] Net / e100: Fix suspend of devices that cannot be power managed
2009-06-14 19:46 ` Rafael J. Wysocki
(?)
@ 2009-06-18 2:03 ` David Miller
-1 siblings, 0 replies; 39+ messages in thread
From: David Miller @ 2009-06-18 2:03 UTC (permalink / raw)
To: rjw; +Cc: jeffrey.t.kirsher, andi, akpm, e1000-devel, netdev, linux-kernel
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Sun, 14 Jun 2009 21:46:46 +0200
> From: Rafael J. Wysocki <rjw@sisk.pl>
>
> If the adapter is not power-manageable using either ACPI, or the
> native PCI PM interface, __e100_power_off() returns error code, which
> causes every attempt to suspend to fail, although it should return 0
> in such a case. Fix this problem by ignoring the return value of
> pci_set_power_state() in __e100_power_off().
>
> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
> Acked-by: Andreas Mohr <andi@lisas.de>
Applied, thanks!
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH] Make e100 suspend handler support PCI cards lacking PM capability
2009-06-14 17:09 ` Rafael J. Wysocki
(?)
(?)
@ 2009-06-19 8:00 ` Andreas Mohr
-1 siblings, 0 replies; 39+ messages in thread
From: Andreas Mohr @ 2009-06-19 8:00 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: andi, akpm, e1000-devel, netdev, linux-kernel
Hi,
On Sun, Jun 14, 2009 at 07:09:45PM +0200, Rafael J. Wysocki wrote:
> On Sunday 14 June 2009, Andreas Mohr wrote:
> > - why do we call netif_device_detach() _after_ doing hardware shutdown
> > of the network controller? I'd guess this can cause huge issues?
> > Someone told me he had rtnl lock issues upon S2D with e100
> > (very similar to my rtnl issues during aborted .suspend),
> > and that might possibly be the reason?
>
> I think you're right, but I'm not a network driver expert.
>
> Perhaps you can change the ordering and see if that fixes the rtnl issue
> (since you're able to reproduce it without my patch, that should be easy to
> verify).
Well, I just moved netif_device_detach() above netif_running() check,
but this didn't fix my network issues in case of a rejecting .suspend
handler: after resume when unloading e100, that hangs, and I get tons of
rtnl timeouts and locked rtnl mutex.
This is most likely because upon e100 unload, a backtrace showed that I
was hanging in e100_down -> msleep (somewhere at the very beginning of e100_down),
which is most definitely the inlined napi_disable() call there:
static inline void napi_disable(struct napi_struct *n)
{
set_bit(NAPI_STATE_DISABLE, &n->state);
while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
msleep(1);
clear_bit(NAPI_STATE_DISABLE, &n->state);
}
IOW the .suspend seems to keep NAPI layer active, yet due to .suspend failure
there's no .resume called, thus card is in an _inoperable_ state and
NAPI cannot be processed any further, thus napi_disable() on driver unload
locks up.
BTW, in include/linux/napi.h, shouldn't napi_disable() make use of
napi_synchronize() instead of C&P?
(simply move napi_synchronize() above napi_disable() and use it there)
Oh wait, there's the CONFIG_SMP complication:
napi_synchronize() is implemented for SMP only, whereas napi_disable()
checks the same thing _always_.
(or is it a BUG that napi_disable() does the same check for non-SMP,
too??)
Thanks,
Andreas Mohr
^ permalink raw reply [flat|nested] 39+ messages in thread
end of thread, other threads:[~2009-06-19 8:00 UTC | newest]
Thread overview: 39+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-12-28 8:01 [GIT]: Networking David Miller
2008-12-28 8:01 ` David Miller
2008-12-29 10:25 ` Andreas Mohr
2008-12-29 10:25 ` Andreas Mohr
2008-12-29 17:17 ` Andrew Morton
2008-12-29 17:17 ` Andrew Morton
2008-12-29 21:09 ` Johannes Berg
2008-12-30 11:05 ` Andreas Mohr
2008-12-29 23:15 ` Jeff Kirsher
2008-12-29 23:15 ` Jeff Kirsher
2008-12-30 12:07 ` Andreas Mohr
2008-12-30 12:07 ` Andreas Mohr
2009-02-28 20:37 ` 2.6.29 e100.c non-MII support status? (Re: [GIT]: Networking) Andreas Mohr
2009-02-28 20:37 ` Andreas Mohr
2009-03-01 10:57 ` Jeff Kirsher
2009-03-01 21:24 ` Andreas Mohr
2009-06-02 21:48 ` [PATCH] Add non-MII PHY support to e100 (Re: 2.6.29 e100.c non-MII support status? (Re: [GIT]: Networking)) Andreas Mohr
2009-06-03 6:01 ` e100 kills S2R on my box, plus network drops dead Andreas Mohr
2009-06-03 6:30 ` Andreas Mohr
2009-06-03 6:30 ` Andreas Mohr
2009-06-13 19:19 ` [PATCH] Make e100 suspend handler support PCI cards lacking PM capability Andreas Mohr
2009-06-13 19:19 ` Andreas Mohr
2009-06-13 22:28 ` Rafael J. Wysocki
2009-06-13 22:45 ` Rafael J. Wysocki
2009-06-13 22:45 ` Rafael J. Wysocki
2009-06-14 12:51 ` Andreas Mohr
2009-06-14 14:06 ` Rafael J. Wysocki
2009-06-14 14:06 ` Rafael J. Wysocki
2009-06-14 16:31 ` Rafael J. Wysocki
2009-06-14 16:46 ` Andreas Mohr
2009-06-14 16:46 ` Andreas Mohr
2009-06-14 17:09 ` Rafael J. Wysocki
2009-06-14 17:09 ` Rafael J. Wysocki
2009-06-14 17:20 ` Andreas Mohr
2009-06-14 17:20 ` Andreas Mohr
2009-06-19 8:00 ` Andreas Mohr
2009-06-14 19:46 ` [PATCH] Net / e100: Fix suspend of devices that cannot be power managed Rafael J. Wysocki
2009-06-14 19:46 ` Rafael J. Wysocki
2009-06-18 2:03 ` David Miller
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.