All of lore.kernel.org
 help / color / mirror / Atom feed
* skb_over_panic kernel panic
@ 2009-03-11  1:10 Christian
  2009-03-11  3:07 ` Christian
  2009-03-13 21:22 ` Francois Romieu
  0 siblings, 2 replies; 4+ messages in thread
From: Christian @ 2009-03-11  1:10 UTC (permalink / raw)
  To: netdev

Hello,

I keep getting kernel panics on my system with output similar to this:

skb_over_panic: text:fffffffff80456cc4 len:2580 put:2580
head:ffff9900bf18a000 data:ffff8800bf18a010 tail:0xa end:0x640 dev:eth0
--------[ cut here ] ----------
kernel BUG at net/core/skbuff.c:124!xt:ffffffff80456cc4 len:2580
put:2580 head:ffff8800bf18a000 data:ffff8800bf18a010 tail:0xa 
invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1f.0/resource
CPU 5
Modules linked in nvidia(P)
Pid: 0, comm: swapper Tainted: P        2.6.28.7 #3
RIP: 0010:[<ffffffff80531630>] [<ffffffff80531630>] skb_put+0x7a/0x89
RSP: 0018:ffff8801bf9b3dd0 EFLAGS: 00010282

(I copied this output by hand so there may be a typo or two) 

Linux server1 2.6.28.7 #3 SMP Mon Mar 9 20:04:12 EDT 2009 x86_64
Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz GenuineIntel GNU/Linux

Before this my kernel was 2.6.27.5 and I was still getting the same
panics.

eth0: RTL8168c/8111c at 0xffffc20000042000, 00:23:54:ed:7f:a6, XID
3c4000c0 IRQ 18
r8169: eth0: link up

00:00.0 Host bridge: Intel Corporation QuickPath Architecture I/O Hub to
ESI Port (rev 12)
00:01.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 1 (rev 12)
00:03.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 3 (rev 12)
00:07.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 7 (rev 12)
00:10.0 PIC: Intel Corporation QuickPath Interconnect Physical and Link
Layer Registers Port 0 (rev 12)
00:10.1 PIC: Intel Corporation QuickPath Interconnect Routing and
Protocol Layer Registers Port 0 (rev 12)
00:13.0 PIC: Intel Corporation QuickPath Architecture I/O Hub I/OxAPIC
Interrupt Controller (rev 12)
00:14.0 PIC: Intel Corporation QuickPath Architecture I/O Hub System
Management Registers (rev 12)
00:14.1 PIC: Intel Corporation QuickPath Architecture I/O Hub GPIO and
Scratch Pad Registers (rev 12)
00:14.2 PIC: Intel Corporation QuickPath Architecture I/O Hub Control
Status and RAS Registers (rev 12)
00:14.3 PIC: Intel Corporation QuickPath Architecture I/O Hub Throttle
Registers (rev 12)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 1
00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 3
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 4
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 5
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller
02:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300
LE] (rev a1)
04:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller (rev 03)
04:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller (rev 03)
05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3403
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
08:00.0 SCSI storage controller: Marvell Technology Group Ltd.
MV88SX6081 8-port SATA II PCI-X Controller (rev 09)
08:01.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA
300 TX4) (rev 02)

# lsmod
Module                  Size  Used by
nvidia               7797560  0 



^ permalink raw reply	[flat|nested] 4+ messages in thread
* Re: skb_over_panic kernel panic
  2009-03-11  1:10 skb_over_panic kernel panic Christian
@ 2009-03-11  3:07 ` Christian
  2009-03-13 21:22 ` Francois Romieu
  1 sibling, 0 replies; 4+ messages in thread
From: Christian @ 2009-03-11  3:07 UTC (permalink / raw)
  To: netdev

I've traced down this problem some more.  It only happens when I send
more than a small amount of data from my OSX86 system to my linux
server.  I can download files from the linux server without any
problems, but if I begin to upload anything it will kernel panic the
system in 2 seconds or less.  I haven't had any problem with regular SSH
sessions, but if I send files using scp or SMB the linux kernel panics
almost immediately.

My OSX86 system is using an Asus Striker Extreme with onboard Marvell
88E1116 Gigabit Ethernet 10/100/1000Mbps and the driver is
nForcEthernetDriver.kext which uses forcedeth. 

-rwxr-xr-x  1 root  wheel  131148 Feb 22  2008
nForcEthernetDriver.kext/Contents/MacOS/forcedeth

On Tue, Mar 10, 2009 at 09:10:13PM -0400, Christian wrote:
> Hello,
> 
> I keep getting kernel panics on my system with output similar to this:
> 
> skb_over_panic: text:fffffffff80456cc4 len:2580 put:2580
> head:ffff9900bf18a000 data:ffff8800bf18a010 tail:0xa end:0x640 dev:eth0
> --------[ cut here ] ----------
> kernel BUG at net/core/skbuff.c:124!xt:ffffffff80456cc4 len:2580
> put:2580 head:ffff8800bf18a000 data:ffff8800bf18a010 tail:0xa 
> invalid opcode: 0000 [#1] SMP
> last sysfs file: /sys/devices/pci0000:00/0000:00:1f.0/resource
> CPU 5
> Modules linked in nvidia(P)
> Pid: 0, comm: swapper Tainted: P        2.6.28.7 #3
> RIP: 0010:[<ffffffff80531630>] [<ffffffff80531630>] skb_put+0x7a/0x89
> RSP: 0018:ffff8801bf9b3dd0 EFLAGS: 00010282
> 
> (I copied this output by hand so there may be a typo or two) 
> 
> Linux server1 2.6.28.7 #3 SMP Mon Mar 9 20:04:12 EDT 2009 x86_64
> Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz GenuineIntel GNU/Linux
> 
> Before this my kernel was 2.6.27.5 and I was still getting the same
> panics.
> 
> eth0: RTL8168c/8111c at 0xffffc20000042000, 00:23:54:ed:7f:a6, XID
> 3c4000c0 IRQ 18
> r8169: eth0: link up
> 
> 00:00.0 Host bridge: Intel Corporation QuickPath Architecture I/O Hub to
> ESI Port (rev 12)
> 00:01.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
> Express Root Port 1 (rev 12)
> 00:03.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
> Express Root Port 3 (rev 12)
> 00:07.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
> Express Root Port 7 (rev 12)
> 00:10.0 PIC: Intel Corporation QuickPath Interconnect Physical and Link
> Layer Registers Port 0 (rev 12)
> 00:10.1 PIC: Intel Corporation QuickPath Interconnect Routing and
> Protocol Layer Registers Port 0 (rev 12)
> 00:13.0 PIC: Intel Corporation QuickPath Architecture I/O Hub I/OxAPIC
> Interrupt Controller (rev 12)
> 00:14.0 PIC: Intel Corporation QuickPath Architecture I/O Hub System
> Management Registers (rev 12)
> 00:14.1 PIC: Intel Corporation QuickPath Architecture I/O Hub GPIO and
> Scratch Pad Registers (rev 12)
> 00:14.2 PIC: Intel Corporation QuickPath Architecture I/O Hub Control
> Status and RAS Registers (rev 12)
> 00:14.3 PIC: Intel Corporation QuickPath Architecture I/O Hub Throttle
> Registers (rev 12)
> 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
> UHCI Controller #4
> 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
> UHCI Controller #5
> 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
> UHCI Controller #6
> 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
> EHCI Controller #2
> 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
> Controller
> 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
> Port 1
> 00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
> Port 3
> 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
> Port 4
> 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
> Port 5
> 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
> UHCI Controller #1
> 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
> UHCI Controller #2
> 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
> UHCI Controller #3
> 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
> EHCI Controller #1
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
> 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface
> Controller
> 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port
> SATA IDE Controller
> 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
> 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port
> SATA IDE Controller
> 02:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300
> LE] (rev a1)
> 04:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363
> AHCI Controller (rev 03)
> 04:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363
> AHCI Controller (rev 03)
> 05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3403
> 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
> 08:00.0 SCSI storage controller: Marvell Technology Group Ltd.
> MV88SX6081 8-port SATA II PCI-X Controller (rev 09)
> 08:01.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA
> 300 TX4) (rev 02)
> 
> # lsmod
> Module                  Size  Used by
> nvidia               7797560  0 
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

^ permalink raw reply	[flat|nested] 4+ messages in thread
* Re: skb_over_panic kernel panic
  2009-03-11  1:10 skb_over_panic kernel panic Christian
  2009-03-11  3:07 ` Christian
@ 2009-03-13 21:22 ` Francois Romieu
  2009-03-13 21:36   ` Christian
  1 sibling, 1 reply; 4+ messages in thread
From: Francois Romieu @ 2009-03-13 21:22 UTC (permalink / raw)
  To: Christian; +Cc: netdev

Christian <cjs@dhp.com> :
[...]
> skb_over_panic: text:fffffffff80456cc4 len:2580 put:2580
> head:ffff9900bf18a000 data:ffff8800bf18a010 tail:0xa end:0x640 dev:eth0
> --------[ cut here ] ----------
> kernel BUG at net/core/skbuff.c:124!xt:ffffffff80456cc4 len:2580
> put:2580 head:ffff8800bf18a000 data:ffff8800bf18a010 tail:0xa 
> invalid opcode: 0000 [#1] SMP
> last sysfs file: /sys/devices/pci0000:00/0000:00:1f.0/resource
> CPU 5
> Modules linked in nvidia(P)
> Pid: 0, comm: swapper Tainted: P        2.6.28.7 #3
[...]
> # lsmod
> Module                  Size  Used by
> nvidia               7797560  0 

Can you reproduce the bug when nvidia's module is not loaded
after boot ?

-- 
Ueimor

^ permalink raw reply	[flat|nested] 4+ messages in thread
* Re: skb_over_panic kernel panic
  2009-03-13 21:22 ` Francois Romieu
@ 2009-03-13 21:36   ` Christian
  0 siblings, 0 replies; 4+ messages in thread
From: Christian @ 2009-03-13 21:36 UTC (permalink / raw)
  To: Francois Romieu; +Cc: netdev

Yes I booted without loading the nvidia module and have the same
problem.

On Fri, Mar 13, 2009 at 10:22:55PM +0100, Francois Romieu wrote:
> Christian <cjs@dhp.com> :
> [...]
> > skb_over_panic: text:fffffffff80456cc4 len:2580 put:2580
> > head:ffff9900bf18a000 data:ffff8800bf18a010 tail:0xa end:0x640 dev:eth0
> > --------[ cut here ] ----------
> > kernel BUG at net/core/skbuff.c:124!xt:ffffffff80456cc4 len:2580
> > put:2580 head:ffff8800bf18a000 data:ffff8800bf18a010 tail:0xa 
> > invalid opcode: 0000 [#1] SMP
> > last sysfs file: /sys/devices/pci0000:00/0000:00:1f.0/resource
> > CPU 5
> > Modules linked in nvidia(P)
> > Pid: 0, comm: swapper Tainted: P        2.6.28.7 #3
> [...]
> > # lsmod
> > Module                  Size  Used by
> > nvidia               7797560  0 
> 
> Can you reproduce the bug when nvidia's module is not loaded
> after boot ?
> 
> -- 
> Ueimor
> 

^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2009-03-13 21:36 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-03-11  1:10 skb_over_panic kernel panic Christian
2009-03-11  3:07 ` Christian
2009-03-13 21:22 ` Francois Romieu
2009-03-13 21:36   ` Christian

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.