* Need a patch tested on a windtunnel powermac @ 2009-04-29 23:30 Paul Mackerras 2009-04-30 0:24 ` Josh Boyer 2009-05-04 21:02 ` Giuliano Pochini 0 siblings, 2 replies; 9+ messages in thread From: Paul Mackerras @ 2009-04-29 23:30 UTC (permalink / raw) To: linuxppc-dev; +Cc: Jean Delvare Does anyone here still have a "windtunnel" powermac (PowerMac3,6) machine running Linux? We need someone to test Jean Delvare's patch to the therm_windtunnel driver. The patch is at: http://patchwork.ozlabs.org/patch/26095/ I don't have a windtunnel machine myself - I have a PowerMac3,5 but not a PowerMac3,6. Paul. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Need a patch tested on a windtunnel powermac 2009-04-29 23:30 Need a patch tested on a windtunnel powermac Paul Mackerras @ 2009-04-30 0:24 ` Josh Boyer 2009-04-30 19:17 ` Josh Boyer 2009-05-04 21:02 ` Giuliano Pochini 1 sibling, 1 reply; 9+ messages in thread From: Josh Boyer @ 2009-04-30 0:24 UTC (permalink / raw) To: Paul Mackerras; +Cc: Jean Delvare, linuxppc-dev On Thu, Apr 30, 2009 at 09:30:59AM +1000, Paul Mackerras wrote: >Does anyone here still have a "windtunnel" powermac (PowerMac3,6) >machine running Linux? We need someone to test Jean Delvare's patch >to the therm_windtunnel driver. The patch is at: > >http://patchwork.ozlabs.org/patch/26095/ > >I don't have a windtunnel machine myself - I have a PowerMac3,5 but >not a PowerMac3,6. I might have one. I'll pull the G4 I have out of it's box and check tomorrow. josh ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Need a patch tested on a windtunnel powermac 2009-04-30 0:24 ` Josh Boyer @ 2009-04-30 19:17 ` Josh Boyer 2009-05-04 14:52 ` Josh Boyer 0 siblings, 1 reply; 9+ messages in thread From: Josh Boyer @ 2009-04-30 19:17 UTC (permalink / raw) To: Paul Mackerras; +Cc: Jean Delvare, linuxppc-dev On Wed, Apr 29, 2009 at 08:24:48PM -0400, Josh Boyer wrote: >On Thu, Apr 30, 2009 at 09:30:59AM +1000, Paul Mackerras wrote: >>Does anyone here still have a "windtunnel" powermac (PowerMac3,6) >>machine running Linux? We need someone to test Jean Delvare's patch >>to the therm_windtunnel driver. The patch is at: >> >>http://patchwork.ozlabs.org/patch/26095/ >> >>I don't have a windtunnel machine myself - I have a PowerMac3,5 but >>not a PowerMac3,6. > >I might have one. I'll pull the G4 I have out of it's box and check tomorrow. Amazingly enough, I do. It's running some crusty-arse gentoo install from 2005, so I need to install something newer on it. Hopefully that goes smoothly today... josh ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Need a patch tested on a windtunnel powermac 2009-04-30 19:17 ` Josh Boyer @ 2009-05-04 14:52 ` Josh Boyer 2009-05-04 15:40 ` Jean Delvare 0 siblings, 1 reply; 9+ messages in thread From: Josh Boyer @ 2009-05-04 14:52 UTC (permalink / raw) To: Paul Mackerras, Jean Delvare; +Cc: linuxppc-dev On Thu, Apr 30, 2009 at 03:17:08PM -0400, Josh Boyer wrote: >On Wed, Apr 29, 2009 at 08:24:48PM -0400, Josh Boyer wrote: >>On Thu, Apr 30, 2009 at 09:30:59AM +1000, Paul Mackerras wrote: >>>Does anyone here still have a "windtunnel" powermac (PowerMac3,6) >>>machine running Linux? We need someone to test Jean Delvare's patch >>>to the therm_windtunnel driver. The patch is at: >>> >>>http://patchwork.ozlabs.org/patch/26095/ >>> >>>I don't have a windtunnel machine myself - I have a PowerMac3,5 but >>>not a PowerMac3,6. >> >>I might have one. I'll pull the G4 I have out of it's box and check tomorrow. > >Amazingly enough, I do. It's running some crusty-arse gentoo install from >2005, so I need to install something newer on it. Hopefully that goes smoothly >today... Ok, installed 2.6.30-rc4 plus Jean's patch and it appears to do something correctly: [jwboyer@localhost macintosh]$ sudo modprobe therm_windtunnel [jwboyer@localhost macintosh]$ dmesg <snip> DS1775 digital thermometer [@49] Temp: 52.5 C Hyst: 75.0 C OS: 80.0 C ADM1030 fan controller [@2c] Reducing overheating limit to 65.0 C (Hyst: 60.0 C) CPU-temp: 52.9 C, Case: 31.3 C, Fan: 0 (tuned -11) [jwboyer@localhost macintosh]$ uname -a Linux localhost.localdomain 2.6.30-rc4 #1 SMP Mon May 4 10:20:39 EDT 2009 ppc ppc ppc GNU/Linux josh ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Need a patch tested on a windtunnel powermac 2009-05-04 14:52 ` Josh Boyer @ 2009-05-04 15:40 ` Jean Delvare 2009-05-04 15:42 ` Josh Boyer 0 siblings, 1 reply; 9+ messages in thread From: Jean Delvare @ 2009-05-04 15:40 UTC (permalink / raw) To: Josh Boyer; +Cc: linuxppc-dev, Paul Mackerras Hi Josh, On Mon, 4 May 2009 10:52:32 -0400, Josh Boyer wrote: > On Thu, Apr 30, 2009 at 03:17:08PM -0400, Josh Boyer wrote: > >On Wed, Apr 29, 2009 at 08:24:48PM -0400, Josh Boyer wrote: > >>On Thu, Apr 30, 2009 at 09:30:59AM +1000, Paul Mackerras wrote: > >>>Does anyone here still have a "windtunnel" powermac (PowerMac3,6) > >>>machine running Linux? We need someone to test Jean Delvare's patch > >>>to the therm_windtunnel driver. The patch is at: > >>> > >>>http://patchwork.ozlabs.org/patch/26095/ > >>> > >>>I don't have a windtunnel machine myself - I have a PowerMac3,5 but > >>>not a PowerMac3,6. > >> > >>I might have one. I'll pull the G4 I have out of it's box and check tomorrow. > > > >Amazingly enough, I do. It's running some crusty-arse gentoo install from > >2005, so I need to install something newer on it. Hopefully that goes smoothly > >today... > > Ok, installed 2.6.30-rc4 plus Jean's patch and it appears to do something > correctly: > > [jwboyer@localhost macintosh]$ sudo modprobe therm_windtunnel > [jwboyer@localhost macintosh]$ dmesg > <snip> > DS1775 digital thermometer [@49] > Temp: 52.5 C Hyst: 75.0 C OS: 80.0 C > ADM1030 fan controller [@2c] > Reducing overheating limit to 65.0 C (Hyst: 60.0 C) > CPU-temp: 52.9 C, Case: 31.3 C, Fan: 0 (tuned -11) > [jwboyer@localhost macintosh]$ uname -a > Linux localhost.localdomain 2.6.30-rc4 #1 SMP Mon May 4 10:20:39 EDT 2009 ppc ppc ppc GNU/Linux Thanks for testing and reporting. This completes the testing of all macintosh thermal drivers. For completeness, as I see you built the driver as a module, could you try unloading and reloading it? Thanks, -- Jean Delvare ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Need a patch tested on a windtunnel powermac 2009-05-04 15:40 ` Jean Delvare @ 2009-05-04 15:42 ` Josh Boyer 2009-05-04 15:49 ` Jean Delvare 0 siblings, 1 reply; 9+ messages in thread From: Josh Boyer @ 2009-05-04 15:42 UTC (permalink / raw) To: Jean Delvare; +Cc: linuxppc-dev, Paul Mackerras On Mon, May 04, 2009 at 05:40:01PM +0200, Jean Delvare wrote: >Hi Josh, >> Ok, installed 2.6.30-rc4 plus Jean's patch and it appears to do something >> correctly: >> >> [jwboyer@localhost macintosh]$ sudo modprobe therm_windtunnel >> [jwboyer@localhost macintosh]$ dmesg >> <snip> >> DS1775 digital thermometer [@49] >> Temp: 52.5 C Hyst: 75.0 C OS: 80.0 C >> ADM1030 fan controller [@2c] >> Reducing overheating limit to 65.0 C (Hyst: 60.0 C) >> CPU-temp: 52.9 C, Case: 31.3 C, Fan: 0 (tuned -11) >> [jwboyer@localhost macintosh]$ uname -a >> Linux localhost.localdomain 2.6.30-rc4 #1 SMP Mon May 4 10:20:39 EDT 2009 ppc ppc ppc GNU/Linux > >Thanks for testing and reporting. This completes the testing of all >macintosh thermal drivers. > >For completeness, as I see you built the driver as a module, could you >try unloading and reloading it? Sure: [jwboyer@localhost macintosh]$ sudo rmmod therm_windtunnel [jwboyer@localhost macintosh]$ sudo modprobe therm_windtunnel [jwboyer@localhost macintosh]$ dmesg <snip> DS1775 digital thermometer [@49] Temp: 53.6 C Hyst: 60.0 C OS: 65.0 C ADM1030 fan controller [@2c] CPU-temp: 53.6 C, Case: 31.8 C, Fan: 0 (tuned -11) Seems to work fine. josh ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Need a patch tested on a windtunnel powermac 2009-05-04 15:42 ` Josh Boyer @ 2009-05-04 15:49 ` Jean Delvare 0 siblings, 0 replies; 9+ messages in thread From: Jean Delvare @ 2009-05-04 15:49 UTC (permalink / raw) To: Josh Boyer; +Cc: linuxppc-dev, Paul Mackerras On Mon, 4 May 2009 11:42:08 -0400, Josh Boyer wrote: > On Mon, May 04, 2009 at 05:40:01PM +0200, Jean Delvare wrote: > >For completeness, as I see you built the driver as a module, could you > >try unloading and reloading it? > > Sure: > > [jwboyer@localhost macintosh]$ sudo rmmod therm_windtunnel > [jwboyer@localhost macintosh]$ sudo modprobe therm_windtunnel > [jwboyer@localhost macintosh]$ dmesg > <snip> > DS1775 digital thermometer [@49] > Temp: 53.6 C Hyst: 60.0 C OS: 65.0 C > ADM1030 fan controller [@2c] > CPU-temp: 53.6 C, Case: 31.8 C, Fan: 0 (tuned -11) > > Seems to work fine. Excellent. Thanks again! -- Jean Delvare ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Need a patch tested on a windtunnel powermac 2009-04-29 23:30 Need a patch tested on a windtunnel powermac Paul Mackerras 2009-04-30 0:24 ` Josh Boyer @ 2009-05-04 21:02 ` Giuliano Pochini 2009-05-05 6:35 ` Jean Delvare 1 sibling, 1 reply; 9+ messages in thread From: Giuliano Pochini @ 2009-05-04 21:02 UTC (permalink / raw) To: Paul Mackerras; +Cc: Jean Delvare, linuxppc-dev On Thu, 30 Apr 2009 09:30:59 +1000 Paul Mackerras <paulus@samba.org> wrote: > Does anyone here still have a "windtunnel" powermac (PowerMac3,6) > machine running Linux? We need someone to test Jean Delvare's patch > to the therm_windtunnel driver. The patch is at: > > http://patchwork.ozlabs.org/patch/26095/ > > I don't have a windtunnel machine myself - I have a PowerMac3,5 but > not a PowerMac3,6. I have a dual-G4 MDD (/proc/cpuinfo says PowerMac3,6). On: Linux Jay 2.6.30-rc4 #1 SMP Sun May 3 16:20:08 CEST 2009 ppc 7455, altivec supported PowerMac3,6 GNU/Linux plus the patch above seems working fine as usual: temperature reports are written in the logs and fan speed changes correctly. therm_windtunnel is not compiled as module. I tested it for a few hours only. -- Giuliano. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Need a patch tested on a windtunnel powermac 2009-05-04 21:02 ` Giuliano Pochini @ 2009-05-05 6:35 ` Jean Delvare 0 siblings, 0 replies; 9+ messages in thread From: Jean Delvare @ 2009-05-05 6:35 UTC (permalink / raw) To: Giuliano Pochini; +Cc: linuxppc-dev, Paul Mackerras On Mon, 4 May 2009 23:02:16 +0200, Giuliano Pochini wrote: > On Thu, 30 Apr 2009 09:30:59 +1000 > Paul Mackerras <paulus@samba.org> wrote: > > > Does anyone here still have a "windtunnel" powermac (PowerMac3,6) > > machine running Linux? We need someone to test Jean Delvare's patch > > to the therm_windtunnel driver. The patch is at: > > > > http://patchwork.ozlabs.org/patch/26095/ > > > > I don't have a windtunnel machine myself - I have a PowerMac3,5 but > > not a PowerMac3,6. > > I have a dual-G4 MDD (/proc/cpuinfo says PowerMac3,6). > > On: > > Linux Jay 2.6.30-rc4 #1 SMP Sun May 3 16:20:08 CEST 2009 ppc 7455, altivec supported PowerMac3,6 GNU/Linux > > plus the patch above seems working fine as usual: temperature reports > are written in the logs and fan speed changes correctly. therm_windtunnel > is not compiled as module. I tested it for a few hours only. Thanks for the report, Giuliano! I've added the information to the wiki. -- Jean Delvare ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2009-05-05 6:36 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2009-04-29 23:30 Need a patch tested on a windtunnel powermac Paul Mackerras 2009-04-30 0:24 ` Josh Boyer 2009-04-30 19:17 ` Josh Boyer 2009-05-04 14:52 ` Josh Boyer 2009-05-04 15:40 ` Jean Delvare 2009-05-04 15:42 ` Josh Boyer 2009-05-04 15:49 ` Jean Delvare 2009-05-04 21:02 ` Giuliano Pochini 2009-05-05 6:35 ` Jean Delvare
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.