* [linux-lvm] Failed to activate snapshot exception store.
@ 2009-05-26 17:01 jose nuno neto
2009-05-26 20:30 ` Jonathan Brassow
0 siblings, 1 reply; 3+ messages in thread
From: jose nuno neto @ 2009-05-26 17:01 UTC (permalink / raw)
To: linux-lvm
[-- Attachment #1: Type: text/plain, Size: 8756 bytes --]
HI
I'm running into some problems with lvm on redhat.
I'm trying to create a snapshot but gives always a error
" Aborting. Failed to activate snapshot exception store."
Also when I try to create a new volume and create new logical volumes I get
the same error
This is the output of the lvcreate -s and vgdisplay
Any ideas/hints are apreciated
Thanks
Jose Nuno Neto
lvcreate --test -L 504M -n SnapTest -i2 -s /dev/vgdb/lvdb02
Test mode: Metadata will NOT be updated.
Using default stripesize 64.00 KB
Rounding size (63 extents) up to stripe boundary size (64 extents)
Aborting. Failed to activate snapshot exception store.
--- Volume group ---
VG Name vgdb
System ID
Format lvm2
Metadata Areas 5
Metadata Sequence No 126
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 2
Open LV 2
Max PV 0
Cur PV 5
Act PV 5
VG Size 249.96 GB
PE Size 8.00 MB
Total PE 31995
Alloc PE / Size 30976 / 242.00 GB
Free PE / Size 1019 / 7.96 GB
VG UUID FqqBnv-EKiI-TXA2-GR3C-b4i0-XTeq-xPxpVa
--- Logical volume ---
LV Name /dev/vgdb/lvdb01
VG Name vgdb
LV UUID 0F2fNt-m2n5-MpJ8-dMNS-Xwzb-QsvS-LyHefm
LV Write Access read/write
LV Status available
# open 1
LV Size 2.00 GB
Current LE 256
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:4
--- Logical volume ---
LV Name /dev/vgdb/lvdb02
VG Name vgdb
LV UUID 7Q038a-7FfX-AhBo-djfL-chFO-MI3N-vzdcbo
LV Write Access read/write
LV Status available
# open 1
LV Size 240.00 GB
Current LE 30720
Segments 3
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:5
--- Physical volumes ---
PV Name /dev/sdh1
PV UUID 13EWPc-BeSd-w1ub-wbhM-c3Ff-pi7U-KWDkxr
PV Status allocatable
Total PE / Free PE 6399 / 0
PV Name /dev/sdi1
PV UUID 14OQ42-xq0w-xln5-z9ts-PHKF-goXA-X9qzTE
PV Status allocatable
Total PE / Free PE 6399 / 255
PV Name /dev/sdj1
PV UUID U3h5F6-g6Wt-MNMb-AHyy-BP2R-BWf1-6LNm55
PV Status allocatable
Total PE / Free PE 6399 / 255
PV Name /dev/sdk1
PV UUID qkpbY5-dvGg-Z1Xb-3cEM-sidS-frbr-pCe8Bk
PV Status allocatable
Total PE / Free PE 6399 / 255
PV Name /dev/sdb1
PV UUID WtDVja-1Q9u-Tgr8-bCU3-qlqS-lahj-m1p2cU
PV Status allocatable
Total PE / Free PE 6399 / 254
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
[-- Attachment #2: Type: text/html, Size: 10865 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [linux-lvm] Failed to activate snapshot exception store.
2009-05-26 17:01 [linux-lvm] Failed to activate snapshot exception store jose nuno neto
@ 2009-05-26 20:30 ` Jonathan Brassow
2009-05-28 13:40 ` jose nuno neto
0 siblings, 1 reply; 3+ messages in thread
From: Jonathan Brassow @ 2009-05-26 20:30 UTC (permalink / raw)
To: LVM general discussion and development
[-- Attachment #1: Type: text/plain, Size: 2854 bytes --]
what happens if you remove the '--test' from your command?
brassow
On May 26, 2009, at 12:01 PM, jose nuno neto wrote:
> HI
>
> I'm running into some problems with lvm on redhat.
> I'm trying to create a snapshot but gives always a error
> " Aborting. Failed to activate snapshot exception store."
>
> Also when I try to create a new volume and create new logical
> volumes I get the same error
>
> This is the output of the lvcreate -s and vgdisplay
> Any ideas/hints are apreciated
>
> Thanks
> Jose Nuno Neto
>
>
>
> lvcreate --test -L 504M -n SnapTest -i2 -s /dev/vgdb/lvdb02
> Test mode: Metadata will NOT be updated.
> Using default stripesize 64.00 KB
> Rounding size (63 extents) up to stripe boundary size (64 extents)
> Aborting. Failed to activate snapshot exception store.
>
>
>
> --- Volume group ---
> VG Name vgdb
> System ID
> Format lvm2
> Metadata Areas 5
> Metadata Sequence No 126
> VG Access read/write
> VG Status resizable
> MAX LV 0
> Cur LV 2
> Open LV 2
> Max PV 0
> Cur PV 5
> Act PV 5
> VG Size 249.96 GB
> PE Size 8.00 MB
> Total PE 31995
> Alloc PE / Size 30976 / 242.00 GB
> Free PE / Size 1019 / 7.96 GB
> VG UUID FqqBnv-EKiI-TXA2-GR3C-b4i0-XTeq-xPxpVa
>
> --- Logical volume ---
> LV Name /dev/vgdb/lvdb01
> VG Name vgdb
> LV UUID 0F2fNt-m2n5-MpJ8-dMNS-Xwzb-QsvS-LyHefm
> LV Write Access read/write
> LV Status available
> # open 1
> LV Size 2.00 GB
> Current LE 256
> Segments 1
> Allocation inherit
> Read ahead sectors auto
> - currently set to 256
> Block device 253:4
>
> --- Logical volume ---
> LV Name /dev/vgdb/lvdb02
> VG Name vgdb
> LV UUID 7Q038a-7FfX-AhBo-djfL-chFO-MI3N-vzdcbo
> LV Write Access read/write
> LV Status available
> # open 1
> LV Size 240.00 GB
> Current LE 30720
> Segments 3
> Allocation inherit
> Read ahead sectors auto
> - currently set to 256
> Block device 253:5
>
>
>
> --- Physical volumes ---
> PV Name /dev/sdh1
> PV UUID 13EWPc-BeSd-w1ub-wbhM-c3Ff-pi7U-KWDkxr
> PV Status allocatable
> Total PE / Free PE 6399 / 0
>
>
>
> PV Name /dev/sdi1
> PV UUID 14OQ42-xq0w-xln5-z9ts-PHKF-goXA-X9qzTE
> PV Status allocatable
> Total PE / Free PE 6399 / 255
>
>
>
> PV Name /dev/sdj1
> PV UUID U3h5F6-g6Wt-MNMb-AHyy-BP2R-BWf1-6LNm55
> PV Status allocatable
> Total PE / Free PE 6399 / 255
>
>
>
> PV Name /dev/sdk1
> PV UUID qkpbY5-dvGg-Z1Xb-3cEM-sidS-frbr-pCe8Bk
> PV Status allocatable
> Total PE / Free PE 6399 / 255
>
>
>
> PV Name /dev/sdb1
> PV UUID WtDVja-1Q9u-Tgr8-bCU3-qlqS-lahj-m1p2cU
> PV Status allocatable
> Total PE / Free PE 6399 / 254
>
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean. _______________________________________________
> linux-lvm mailing list
> linux-lvm@redhat.com
> https://www.redhat.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
[-- Attachment #2: Type: text/html, Size: 7580 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [linux-lvm] Failed to activate snapshot exception store.
2009-05-26 20:30 ` Jonathan Brassow
@ 2009-05-28 13:40 ` jose nuno neto
0 siblings, 0 replies; 3+ messages in thread
From: jose nuno neto @ 2009-05-28 13:40 UTC (permalink / raw)
To: LVM general discussion and development
[-- Attachment #1: Type: text/plain, Size: 4536 bytes --]
Hi,
Thanks for the reply :-)
If I take the --test, yes the snapshot gets created
But if I try to create a new VG and after a new LV I get the same error. I can
the work I was supposed to do, but would like to understand what's going
on......
lvcreate -L 1G -n TEST vg_mysql_bk
Aborting. Failed to activate new LV to wipe the start of it.
vgdisplay -v vg_mysql_bk
Using volume group(s) on command line
Finding volume group "vg_mysql_bk"
--- Volume group ---
VG Name vg_mysql_bk
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 3
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 0
Open LV 0
Max PV 0
Cur PV 1
Act PV 1
VG Size 250.00 GB
PE Size 4.00 MB
Total PE 63999
Alloc PE / Size 0 / 0
Free PE / Size 63999 / 250.00 GB
VG UUID orekvq-dWqZ-uXs8-gETe-WkyG-adTO-YHdHPh
--- Physical volumes ---
PV Name /dev/sdl1
PV UUID pw80TN-xYP2-FY4T-ASWF-PpIe-j6vo-WNQTtG
PV Status allocatable
Total PE / Free PE 63999 / 63999
On Tuesday 26 May 2009 21:30:40 Jonathan Brassow wrote:
> what happens if you remove the '--test' from your command?
>
> brassow
>
> On May 26, 2009, at 12:01 PM, jose nuno neto wrote:
> > HI
> >
> > I'm running into some problems with lvm on redhat.
> > I'm trying to create a snapshot but gives always a error
> > " Aborting. Failed to activate snapshot exception store."
> >
> > Also when I try to create a new volume and create new logical
> > volumes I get the same error
> >
> > This is the output of the lvcreate -s and vgdisplay
> > Any ideas/hints are apreciated
> >
> > Thanks
> > Jose Nuno Neto
> >
> >
> >
> > lvcreate --test -L 504M -n SnapTest -i2 -s /dev/vgdb/lvdb02
> > Test mode: Metadata will NOT be updated.
> > Using default stripesize 64.00 KB
> > Rounding size (63 extents) up to stripe boundary size (64 extents)
> > Aborting. Failed to activate snapshot exception store.
> >
> >
> >
> > --- Volume group ---
> > VG Name vgdb
> > System ID
> > Format lvm2
> > Metadata Areas 5
> > Metadata Sequence No 126
> > VG Access read/write
> > VG Status resizable
> > MAX LV 0
> > Cur LV 2
> > Open LV 2
> > Max PV 0
> > Cur PV 5
> > Act PV 5
> > VG Size 249.96 GB
> > PE Size 8.00 MB
> > Total PE 31995
> > Alloc PE / Size 30976 / 242.00 GB
> > Free PE / Size 1019 / 7.96 GB
> > VG UUID FqqBnv-EKiI-TXA2-GR3C-b4i0-XTeq-xPxpVa
> >
> > --- Logical volume ---
> > LV Name /dev/vgdb/lvdb01
> > VG Name vgdb
> > LV UUID 0F2fNt-m2n5-MpJ8-dMNS-Xwzb-QsvS-LyHefm
> > LV Write Access read/write
> > LV Status available
> > # open 1
> > LV Size 2.00 GB
> > Current LE 256
> > Segments 1
> > Allocation inherit
> > Read ahead sectors auto
> > - currently set to 256
> > Block device 253:4
> >
> > --- Logical volume ---
> > LV Name /dev/vgdb/lvdb02
> > VG Name vgdb
> > LV UUID 7Q038a-7FfX-AhBo-djfL-chFO-MI3N-vzdcbo
> > LV Write Access read/write
> > LV Status available
> > # open 1
> > LV Size 240.00 GB
> > Current LE 30720
> > Segments 3
> > Allocation inherit
> > Read ahead sectors auto
> > - currently set to 256
> > Block device 253:5
> >
> >
> >
> > --- Physical volumes ---
> > PV Name /dev/sdh1
> > PV UUID 13EWPc-BeSd-w1ub-wbhM-c3Ff-pi7U-KWDkxr
> > PV Status allocatable
> > Total PE / Free PE 6399 / 0
> >
> >
> >
> > PV Name /dev/sdi1
> > PV UUID 14OQ42-xq0w-xln5-z9ts-PHKF-goXA-X9qzTE
> > PV Status allocatable
> > Total PE / Free PE 6399 / 255
> >
> >
> >
> > PV Name /dev/sdj1
> > PV UUID U3h5F6-g6Wt-MNMb-AHyy-BP2R-BWf1-6LNm55
> > PV Status allocatable
> > Total PE / Free PE 6399 / 255
> >
> >
> >
> > PV Name /dev/sdk1
> > PV UUID qkpbY5-dvGg-Z1Xb-3cEM-sidS-frbr-pCe8Bk
> > PV Status allocatable
> > Total PE / Free PE 6399 / 255
> >
> >
> >
> > PV Name /dev/sdb1
> > PV UUID WtDVja-1Q9u-Tgr8-bCU3-qlqS-lahj-m1p2cU
> > PV Status allocatable
> > Total PE / Free PE 6399 / 254
> >
> >
> >
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean. _______________________________________________
> > linux-lvm mailing list
> > linux-lvm@redhat.com
> > https://www.redhat.com/mailman/listinfo/linux-lvm
> > read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
[-- Attachment #2: Type: text/html, Size: 7853 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-05-28 14:07 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-05-26 17:01 [linux-lvm] Failed to activate snapshot exception store jose nuno neto
2009-05-26 20:30 ` Jonathan Brassow
2009-05-28 13:40 ` jose nuno neto
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.