+ input-bcm5974-report-abs_mt-events.patch added to -mm tree

+ input-bcm5974-report-abs_mt-events.patch added to -mm tree

[akpm]

The patch titled
     input: bcm5974: report ABS_MT events
has been added to the -mm tree.  Its filename is
     input-bcm5974-report-abs_mt-events.patch

Before you just go and hit "reply", please:
   a) Consider who else should be cc'ed
   b) Prefer to cc a suitable mailing list as well
   c) Ideally: find the original patch on the mailing list and do a
      reply-to-all to that, adding suitable additional cc's

*** Remember to use Documentation/SubmitChecklist when testing your code ***

See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this

The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/

------------------------------------------------------
Subject: input: bcm5974: report ABS_MT events
From: "Henrik Rydberg" <rydberg@euromail.se>

Make bcm5974 report raw multi-touch (MT) data in the form of ABS_MT
events.  The module parameter (nomt) may be used to turn off the effect of
this patch.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---


diff -puN drivers/input/mouse/bcm5974.c~input-bcm5974-report-abs_mt-events drivers/input/mouse/bcm5974.c
--- a/drivers/input/mouse/bcm5974.c~input-bcm5974-report-abs_mt-events
+++ a/drivers/input/mouse/bcm5974.c
@@ -96,6 +96,10 @@ static int debug = 1;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Activate debugging output");
 
+static int nomt;
+module_param(nomt, int, 0644);
+MODULE_PARM_DESC(nomt, "Disable multitouch (MT) events");
+
 /* button data structure */
 struct bt_data {
 	u8 unknown1;		/* constant */
@@ -139,6 +143,7 @@ struct tp_finger {
 /* trackpad finger data size, empirically at least ten fingers */
 #define SIZEOF_FINGER		sizeof(struct tp_finger)
 #define SIZEOF_ALL_FINGERS	(16 * SIZEOF_FINGER)
+#define MAX_FINGER_ORIENTATION	16384
 
 /* device-specific parameters */
 struct bcm5974_param {
@@ -284,6 +289,28 @@ static void setup_events_to_report(struc
 	input_set_abs_params(input_dev, ABS_Y,
 				0, cfg->y.dim, cfg->y.fuzz, 0);
 
+	if (!nomt) {
+		/* finger touch area */
+		input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+				     cfg->w.devmin, cfg->w.devmax, 0, 0);
+		input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR,
+				     cfg->w.devmin, cfg->w.devmax, 0, 0);
+		/* finger approach area */
+		input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR,
+				     cfg->w.devmin, cfg->w.devmax, 0, 0);
+		input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR,
+				     cfg->w.devmin, cfg->w.devmax, 0, 0);
+		/* finger orientation */
+		input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
+				     -MAX_FINGER_ORIENTATION,
+				     MAX_FINGER_ORIENTATION, 0, 0);
+		/* finger position */
+		input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+				     cfg->x.devmin, cfg->x.devmax, 0, 0);
+		input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+				     cfg->y.devmin, cfg->y.devmax, 0, 0);
+	}
+
 	__set_bit(EV_KEY, input_dev->evbit);
 	__set_bit(BTN_TOUCH, input_dev->keybit);
 	__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
@@ -316,7 +343,7 @@ static int report_tp_state(struct bcm597
 	const struct bcm5974_config *c = &dev->cfg;
 	const struct tp_finger *f;
 	struct input_dev *input = dev->input;
-	int raw_p, raw_w, raw_x, raw_y, raw_n;
+	int raw_p, raw_w, raw_x, raw_y, raw_n, i;
 	int ptest, origin, ibt = 0, nmin = 0, nmax = 0;
 	int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0;
 
@@ -329,6 +356,30 @@ static int report_tp_state(struct bcm597
 
 	/* always track the first finger; when detached, start over */
 	if (raw_n) {
+
+		/* report raw trackpad data */
+		if (!nomt) {
+			for (i = 0; i < raw_n; i++) {
+				int y = c->y.devmin + c->y.devmax;
+				input_report_abs(input, ABS_MT_TOUCH_MAJOR,
+						 raw2int(f[i].force_major));
+				input_report_abs(input, ABS_MT_TOUCH_MINOR,
+						 raw2int(f[i].force_minor));
+				input_report_abs(input, ABS_MT_WIDTH_MAJOR,
+						 raw2int(f[i].size_major));
+				input_report_abs(input, ABS_MT_WIDTH_MINOR,
+						 raw2int(f[i].size_minor));
+				input_report_abs(input, ABS_MT_ORIENTATION,
+						 MAX_FINGER_ORIENTATION -
+						 raw2int(f[i].orientation));
+				input_report_abs(input, ABS_MT_POSITION_X,
+						 raw2int(f[i].abs_x));
+				input_report_abs(input, ABS_MT_POSITION_Y,
+						 y - raw2int(f[i].abs_y));
+				input_mt_sync(input);
+			}
+		}
+
 		raw_p = raw2int(f->force_major);
 		raw_w = raw2int(f->size_major);
 		raw_x = raw2int(f->abs_x);
_

Patches currently in -mm which might be from rydberg@euromail.se are

input-bcm5974-report-abs_mt-events.patch
input-bcm5974-retract-efi-broken-suspend_resume.patch