Re: PATCH: Network Device Naming mechanism and policy

Re: PATCH: Network Device Naming mechanism and policy

[Narendra K]

On Fri, Oct 09, 2009 at 07:12:07PM +0530, K, Narendra wrote:
> > example udev config:
> > SUBSYSTEM=="net",
> SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> 
> work as well.  But coupling the ifindex to the MAC address like this
> doesn't work.  (In general, coupling any two unrelated attributes when
> trying to do persistent names doesn't work.)
> 
Attaching the latest patch incorporating review comments.

By creating character devices for every network device, we can use
udev to maintain alternate naming policies for devices, including
additional names for the same device, without interfering with the
name that the kernel assigns a device.

This is conditionalized on CONFIG_NET_CDEV.  If enabled (the default),
device nodes will automatically be created in /dev/netdev/ for each
network device.  (/dev/net/ is already populated by the tun device.)

These device nodes are not functional at the moment - open() returns
-ENOSYS.  Their only purpose is to provide userspace with a kernel
name to ifindex mapping, in a form that udev can easily manage.

Signed-off-by: Jordan Hargrave <Jordan_Hargrave@dell.com>
Signed-off-by: Narendra K <narendra_k@dell.com>
Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
---
 include/linux/netdevice.h |    4 ++++
 net/Kconfig               |   10 ++++++++++
 net/core/Makefile         |    1 +
 net/core/cdev.c           |   42 ++++++++++++++++++++++++++++++++++++++++++
 net/core/cdev.h           |   13 +++++++++++++
 net/core/dev.c            |   10 ++++++++++
 net/core/net-sysfs.c      |   13 +++++++++++++
 7 files changed, 93 insertions(+), 0 deletions(-)
 create mode 100644 net/core/cdev.c
 create mode 100644 net/core/cdev.h

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 94958c1..7c0fc81 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -44,6 +44,7 @@
 #include <linux/workqueue.h>
 
 #include <linux/ethtool.h>
+#include <linux/cdev.h>
 #include <net/net_namespace.h>
 #include <net/dsa.h>
 #ifdef CONFIG_DCB
@@ -916,6 +917,9 @@ struct net_device
 	/* max exchange id for FCoE LRO by ddp */
 	unsigned int		fcoe_ddp_xid;
 #endif
+#ifdef CONFIG_NET_CDEV
+	struct cdev cdev;
+#endif
 };
 #define to_net_dev(d) container_of(d, struct net_device, dev)
 
diff --git a/net/Kconfig b/net/Kconfig
index 041c35e..bdc5bd7 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -43,6 +43,16 @@ config COMPAT_NETLINK_MESSAGES
 	  Newly written code should NEVER need this option but do
 	  compat-independent messages instead!
 
+config NET_CDEV
+       bool "/dev files for network devices"
+       default y
+       help
+         This option causes /dev entries to be created for each
+         network device.  This allows the use of udev to create
+         alternate device naming policies.
+
+	 If unsure, say Y.
+
 menu "Networking options"
 
 source "net/packet/Kconfig"
diff --git a/net/core/Makefile b/net/core/Makefile
index 796f46e..0b40d2c 100644
--- a/net/core/Makefile
+++ b/net/core/Makefile
@@ -19,4 +19,5 @@ obj-$(CONFIG_NET_DMA) += user_dma.o
 obj-$(CONFIG_FIB_RULES) += fib_rules.o
 obj-$(CONFIG_TRACEPOINTS) += net-traces.o
 obj-$(CONFIG_NET_DROP_MONITOR) += drop_monitor.o
+obj-$(CONFIG_NET_CDEV) += cdev.o
 
diff --git a/net/core/cdev.c b/net/core/cdev.c
new file mode 100644
index 0000000..1f36076
--- /dev/null
+++ b/net/core/cdev.c
@@ -0,0 +1,42 @@
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/netdevice.h>
+#include <linux/device.h>
+
+/* Used for network dynamic major number */
+static dev_t netdev_devt;
+
+static int netdev_cdev_open(struct inode *inode, struct file *filep)
+{
+	/* no operations on this device are implemented */
+	return -ENOSYS;
+}
+
+static const struct file_operations netdev_cdev_fops = {
+	.owner = THIS_MODULE,
+	.open = netdev_cdev_open,
+};
+
+void netdev_cdev_alloc(void)
+{
+	alloc_chrdev_region(&netdev_devt, 0, 1<<20, "net");
+}
+
+void netdev_cdev_init(struct net_device *dev)
+{
+	cdev_init(&dev->cdev, &netdev_cdev_fops);
+	cdev_add(&dev->cdev, MKDEV(MAJOR(netdev_devt), dev->ifindex), 1);
+
+}
+
+void netdev_cdev_del(struct net_device *dev)
+{
+	if (dev->cdev.dev)
+		cdev_del(&dev->cdev);
+}
+
+void netdev_cdev_kobj_init(struct device *dev, struct net_device *net)
+{
+	if (net->cdev.dev)
+		dev->devt = net->cdev.dev;
+}
diff --git a/net/core/cdev.h b/net/core/cdev.h
new file mode 100644
index 0000000..9cf5a90
--- /dev/null
+++ b/net/core/cdev.h
@@ -0,0 +1,13 @@
+#include <linux/netdevice.h>
+
+#ifdef CONFIG_NET_CDEV
+void netdev_cdev_alloc(void);
+void netdev_cdev_init(struct net_device *dev);
+void netdev_cdev_del(struct net_device *dev);
+void netdev_cdev_kobj_init(struct device *dev, struct net_device *net);
+#else
+static inline void netdev_cdev_alloc(void) {}
+static inline void netdev_cdev_init(struct net_device *dev) {}
+static inline void netdev_cdev_del(struct net_device *dev) {}
+static inline void netdev_cdev_kobj_init(struct device *dev, struct net_device *net) {}
+#endif
diff --git a/net/core/dev.c b/net/core/dev.c
index b8f74cf..c4ebfcd 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -129,6 +129,7 @@
 #include <trace/events/napi.h>
 
 #include "net-sysfs.h"
+#include "cdev.h"
 
 /* Instead of increasing this, you should create a hash table. */
 #define MAX_GRO_SKBS 8
@@ -4684,6 +4685,7 @@ static void rollback_registered(struct net_device *dev)
 
 	/* Remove entries from kobject tree */
 	netdev_unregister_kobject(dev);
+	netdev_cdev_del(dev);
 
 	synchronize_net();
 
@@ -4835,6 +4837,8 @@ int register_netdevice(struct net_device *dev)
 	if (dev->features & NETIF_F_SG)
 		dev->features |= NETIF_F_GSO;
 
+	netdev_cdev_init(dev);
+
 	netdev_initialize_kobject(dev);
 	ret = netdev_register_kobject(dev);
 	if (ret)
@@ -4864,6 +4868,7 @@ out:
 	return ret;
 
 err_uninit:
+	netdev_cdev_del(dev);
 	if (dev->netdev_ops->ndo_uninit)
 		dev->netdev_ops->ndo_uninit(dev);
 	goto out;
@@ -5371,6 +5376,7 @@ int dev_change_net_namespace(struct net_device *dev, struct net *net, const char
 	dev_addr_discard(dev);
 
 	netdev_unregister_kobject(dev);
+	netdev_cdev_del(dev);
 
 	/* Actually switch the network namespace */
 	dev_net_set(dev, net);
@@ -5387,6 +5393,8 @@ int dev_change_net_namespace(struct net_device *dev, struct net *net, const char
 			dev->iflink = dev->ifindex;
 	}
 
+	netdev_cdev_init(dev);
+
 	/* Fixup kobjects */
 	err = netdev_register_kobject(dev);
 	WARN_ON(err);
@@ -5620,6 +5628,8 @@ static int __init net_dev_init(void)
 
 	BUG_ON(!dev_boot_phase);
 
+	netdev_cdev_alloc();
+
 	if (dev_proc_init())
 		goto out;
 
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 821d309..ba0af79 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -19,6 +19,7 @@
 #include <net/wext.h>
 
 #include "net-sysfs.h"
+#include "cdev.h"
 
 #ifdef CONFIG_SYSFS
 static const char fmt_hex[] = "%#x\n";
@@ -461,6 +462,14 @@ static void netdev_release(struct device *d)
 	kfree((char *)dev - dev->padded);
 }
 
+#ifdef CONFIG_NET_CDEV
+static char *netdev_devnode(struct device *d, mode_t *mode)
+{
+	struct net_device *dev = to_net_dev(d);
+	return kasprintf(GFP_KERNEL, "netdev/%s", dev->name);
+}
+#endif
+
 static struct class net_class = {
 	.name = "net",
 	.dev_release = netdev_release,
@@ -470,6 +479,9 @@ static struct class net_class = {
 #ifdef CONFIG_HOTPLUG
 	.dev_uevent = netdev_uevent,
 #endif
+#ifdef CONFIG_NET_CDEV
+	.devnode = netdev_devnode,
+#endif
 };
 
 /* Delete sysfs entries but hold kobject reference until after all
@@ -496,6 +508,7 @@ int netdev_register_kobject(struct net_device *net)
 	dev->class = &net_class;
 	dev->platform_data = net;
 	dev->groups = groups;
+	netdev_cdev_kobj_init(dev, net);
 
 	dev_set_name(dev, "%s", net->name);
 
-- 

With regards,
Narendra K

Re: PATCH: Network Device Naming mechanism and policy

[Narendra K]

On Fri, Oct 09, 2009 at 07:12:07PM +0530, K, Narendra wrote:
> > example udev config:
> > SUBSYSTEM="net",
> SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> 
> work as well.  But coupling the ifindex to the MAC address like this
> doesn't work.  (In general, coupling any two unrelated attributes when
> trying to do persistent names doesn't work.)
> 
Attaching the latest patch incorporating review comments.

By creating character devices for every network device, we can use
udev to maintain alternate naming policies for devices, including
additional names for the same device, without interfering with the
name that the kernel assigns a device.

This is conditionalized on CONFIG_NET_CDEV.  If enabled (the default),
device nodes will automatically be created in /dev/netdev/ for each
network device.  (/dev/net/ is already populated by the tun device.)

These device nodes are not functional at the moment - open() returns
-ENOSYS.  Their only purpose is to provide userspace with a kernel
name to ifindex mapping, in a form that udev can easily manage.

Signed-off-by: Jordan Hargrave <Jordan_Hargrave@dell.com>
Signed-off-by: Narendra K <narendra_k@dell.com>
Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
---
 include/linux/netdevice.h |    4 ++++
 net/Kconfig               |   10 ++++++++++
 net/core/Makefile         |    1 +
 net/core/cdev.c           |   42 ++++++++++++++++++++++++++++++++++++++++++
 net/core/cdev.h           |   13 +++++++++++++
 net/core/dev.c            |   10 ++++++++++
 net/core/net-sysfs.c      |   13 +++++++++++++
 7 files changed, 93 insertions(+), 0 deletions(-)
 create mode 100644 net/core/cdev.c
 create mode 100644 net/core/cdev.h

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 94958c1..7c0fc81 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -44,6 +44,7 @@
 #include <linux/workqueue.h>
 
 #include <linux/ethtool.h>
+#include <linux/cdev.h>
 #include <net/net_namespace.h>
 #include <net/dsa.h>
 #ifdef CONFIG_DCB
@@ -916,6 +917,9 @@ struct net_device
 	/* max exchange id for FCoE LRO by ddp */
 	unsigned int		fcoe_ddp_xid;
 #endif
+#ifdef CONFIG_NET_CDEV
+	struct cdev cdev;
+#endif
 };
 #define to_net_dev(d) container_of(d, struct net_device, dev)
 
diff --git a/net/Kconfig b/net/Kconfig
index 041c35e..bdc5bd7 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -43,6 +43,16 @@ config COMPAT_NETLINK_MESSAGES
 	  Newly written code should NEVER need this option but do
 	  compat-independent messages instead!
 
+config NET_CDEV
+       bool "/dev files for network devices"
+       default y
+       help
+         This option causes /dev entries to be created for each
+         network device.  This allows the use of udev to create
+         alternate device naming policies.
+
+	 If unsure, say Y.
+
 menu "Networking options"
 
 source "net/packet/Kconfig"
diff --git a/net/core/Makefile b/net/core/Makefile
index 796f46e..0b40d2c 100644
--- a/net/core/Makefile
+++ b/net/core/Makefile
@@ -19,4 +19,5 @@ obj-$(CONFIG_NET_DMA) += user_dma.o
 obj-$(CONFIG_FIB_RULES) += fib_rules.o
 obj-$(CONFIG_TRACEPOINTS) += net-traces.o
 obj-$(CONFIG_NET_DROP_MONITOR) += drop_monitor.o
+obj-$(CONFIG_NET_CDEV) += cdev.o
 
diff --git a/net/core/cdev.c b/net/core/cdev.c
new file mode 100644
index 0000000..1f36076
--- /dev/null
+++ b/net/core/cdev.c
@@ -0,0 +1,42 @@
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/netdevice.h>
+#include <linux/device.h>
+
+/* Used for network dynamic major number */
+static dev_t netdev_devt;
+
+static int netdev_cdev_open(struct inode *inode, struct file *filep)
+{
+	/* no operations on this device are implemented */
+	return -ENOSYS;
+}
+
+static const struct file_operations netdev_cdev_fops = {
+	.owner = THIS_MODULE,
+	.open = netdev_cdev_open,
+};
+
+void netdev_cdev_alloc(void)
+{
+	alloc_chrdev_region(&netdev_devt, 0, 1<<20, "net");
+}
+
+void netdev_cdev_init(struct net_device *dev)
+{
+	cdev_init(&dev->cdev, &netdev_cdev_fops);
+	cdev_add(&dev->cdev, MKDEV(MAJOR(netdev_devt), dev->ifindex), 1);
+
+}
+
+void netdev_cdev_del(struct net_device *dev)
+{
+	if (dev->cdev.dev)
+		cdev_del(&dev->cdev);
+}
+
+void netdev_cdev_kobj_init(struct device *dev, struct net_device *net)
+{
+	if (net->cdev.dev)
+		dev->devt = net->cdev.dev;
+}
diff --git a/net/core/cdev.h b/net/core/cdev.h
new file mode 100644
index 0000000..9cf5a90
--- /dev/null
+++ b/net/core/cdev.h
@@ -0,0 +1,13 @@
+#include <linux/netdevice.h>
+
+#ifdef CONFIG_NET_CDEV
+void netdev_cdev_alloc(void);
+void netdev_cdev_init(struct net_device *dev);
+void netdev_cdev_del(struct net_device *dev);
+void netdev_cdev_kobj_init(struct device *dev, struct net_device *net);
+#else
+static inline void netdev_cdev_alloc(void) {}
+static inline void netdev_cdev_init(struct net_device *dev) {}
+static inline void netdev_cdev_del(struct net_device *dev) {}
+static inline void netdev_cdev_kobj_init(struct device *dev, struct net_device *net) {}
+#endif
diff --git a/net/core/dev.c b/net/core/dev.c
index b8f74cf..c4ebfcd 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -129,6 +129,7 @@
 #include <trace/events/napi.h>
 
 #include "net-sysfs.h"
+#include "cdev.h"
 
 /* Instead of increasing this, you should create a hash table. */
 #define MAX_GRO_SKBS 8
@@ -4684,6 +4685,7 @@ static void rollback_registered(struct net_device *dev)
 
 	/* Remove entries from kobject tree */
 	netdev_unregister_kobject(dev);
+	netdev_cdev_del(dev);
 
 	synchronize_net();
 
@@ -4835,6 +4837,8 @@ int register_netdevice(struct net_device *dev)
 	if (dev->features & NETIF_F_SG)
 		dev->features |= NETIF_F_GSO;
 
+	netdev_cdev_init(dev);
+
 	netdev_initialize_kobject(dev);
 	ret = netdev_register_kobject(dev);
 	if (ret)
@@ -4864,6 +4868,7 @@ out:
 	return ret;
 
 err_uninit:
+	netdev_cdev_del(dev);
 	if (dev->netdev_ops->ndo_uninit)
 		dev->netdev_ops->ndo_uninit(dev);
 	goto out;
@@ -5371,6 +5376,7 @@ int dev_change_net_namespace(struct net_device *dev, struct net *net, const char
 	dev_addr_discard(dev);
 
 	netdev_unregister_kobject(dev);
+	netdev_cdev_del(dev);
 
 	/* Actually switch the network namespace */
 	dev_net_set(dev, net);
@@ -5387,6 +5393,8 @@ int dev_change_net_namespace(struct net_device *dev, struct net *net, const char
 			dev->iflink = dev->ifindex;
 	}
 
+	netdev_cdev_init(dev);
+
 	/* Fixup kobjects */
 	err = netdev_register_kobject(dev);
 	WARN_ON(err);
@@ -5620,6 +5628,8 @@ static int __init net_dev_init(void)
 
 	BUG_ON(!dev_boot_phase);
 
+	netdev_cdev_alloc();
+
 	if (dev_proc_init())
 		goto out;
 
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 821d309..ba0af79 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -19,6 +19,7 @@
 #include <net/wext.h>
 
 #include "net-sysfs.h"
+#include "cdev.h"
 
 #ifdef CONFIG_SYSFS
 static const char fmt_hex[] = "%#x\n";
@@ -461,6 +462,14 @@ static void netdev_release(struct device *d)
 	kfree((char *)dev - dev->padded);
 }
 
+#ifdef CONFIG_NET_CDEV
+static char *netdev_devnode(struct device *d, mode_t *mode)
+{
+	struct net_device *dev = to_net_dev(d);
+	return kasprintf(GFP_KERNEL, "netdev/%s", dev->name);
+}
+#endif
+
 static struct class net_class = {
 	.name = "net",
 	.dev_release = netdev_release,
@@ -470,6 +479,9 @@ static struct class net_class = {
 #ifdef CONFIG_HOTPLUG
 	.dev_uevent = netdev_uevent,
 #endif
+#ifdef CONFIG_NET_CDEV
+	.devnode = netdev_devnode,
+#endif
 };
 
 /* Delete sysfs entries but hold kobject reference until after all
@@ -496,6 +508,7 @@ int netdev_register_kobject(struct net_device *net)
 	dev->class = &net_class;
 	dev->platform_data = net;
 	dev->groups = groups;
+	netdev_cdev_kobj_init(dev, net);
 
 	dev_set_name(dev, "%s", net->name);
 
-- 

With regards,
Narendra K

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Fri, Oct 09, 2009 at 09:00:01AM -0500, Narendra K wrote:
> On Fri, Oct 09, 2009 at 07:12:07PM +0530, K, Narendra wrote:
> > > example udev config:
> > > SUBSYSTEM=="net",
> > SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> > 
> > work as well.  But coupling the ifindex to the MAC address like this
> > doesn't work.  (In general, coupling any two unrelated attributes when
> > trying to do persistent names doesn't work.)
> > 
> Attaching the latest patch incorporating review comments.

Thank you Narendra.

Let me also note that we are prepared to have userspace consumers of
this new character device node.

http://linux.dell.com/wiki/index.php/Oss/libnetdevname

notes how the kernel patch will interact with udev, describes the new
library helper function in libnetdevname, and has patches for
net-tools, iproute2, and ethtool to make use of the helper function.

As has been noted here, MAC addresses are not necessarily unique to an
interface.  As such, we are not proposing a net/by-mac/* symlink to
/dev/netdev/*.

Thanks,
Matt

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Fri, Oct 09, 2009 at 09:00:01AM -0500, Narendra K wrote:
> On Fri, Oct 09, 2009 at 07:12:07PM +0530, K, Narendra wrote:
> > > example udev config:
> > > SUBSYSTEM="net",
> > SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> > 
> > work as well.  But coupling the ifindex to the MAC address like this
> > doesn't work.  (In general, coupling any two unrelated attributes when
> > trying to do persistent names doesn't work.)
> > 
> Attaching the latest patch incorporating review comments.

Thank you Narendra.

Let me also note that we are prepared to have userspace consumers of
this new character device node.

http://linux.dell.com/wiki/index.php/Oss/libnetdevname

notes how the kernel patch will interact with udev, describes the new
library helper function in libnetdevname, and has patches for
net-tools, iproute2, and ethtool to make use of the helper function.

As has been noted here, MAC addresses are not necessarily unique to an
interface.  As such, we are not proposing a net/by-mac/* symlink to
/dev/netdev/*.

Thanks,
Matt

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Bryan Kadzban]

[-- Attachment #1: Type: text/plain, Size: 905 bytes --]

Matt Domsch wrote:
> Let me also note that we are prepared to have userspace consumers of 
> this new character device node.
> 
> http://linux.dell.com/wiki/index.php/Oss/libnetdevname
> 
> notes how the kernel patch will interact with udev, describes the new
> library helper function in libnetdevname, and has patches for 
> net-tools, iproute2, and ethtool to make use of the helper function.
> 
> As has been noted here, MAC addresses are not necessarily unique to
> an interface.

Only in the case of e.g. qemu (virtual hardware), I think.  (Or some
kinds of broken hardware.  Anything not on the udev whitelist from
75-persistent-net-generator.rules.)

The combination of (MAC, ifindex) is not unique, which is what I meant
earlier -- but the setup on the wiki seems to handle this properly.
Assuming there was a /dev/net/by-mac/00:01:02:03:04:05 link, it should
work fine...


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 260 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[Bryan Kadzban]

[-- Attachment #1: Type: text/plain, Size: 905 bytes --]

Matt Domsch wrote:
> Let me also note that we are prepared to have userspace consumers of 
> this new character device node.
> 
> http://linux.dell.com/wiki/index.php/Oss/libnetdevname
> 
> notes how the kernel patch will interact with udev, describes the new
> library helper function in libnetdevname, and has patches for 
> net-tools, iproute2, and ethtool to make use of the helper function.
> 
> As has been noted here, MAC addresses are not necessarily unique to
> an interface.

Only in the case of e.g. qemu (virtual hardware), I think.  (Or some
kinds of broken hardware.  Anything not on the udev whitelist from
75-persistent-net-generator.rules.)

The combination of (MAC, ifindex) is not unique, which is what I meant
earlier -- but the setup on the wiki seems to handle this properly.
Assuming there was a /dev/net/by-mac/00:01:02:03:04:05 link, it should
work fine...


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 260 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Fri, Oct 09, 2009 at 09:00:01AM -0500, Narendra K wrote:
> On Fri, Oct 09, 2009 at 07:12:07PM +0530, K, Narendra wrote:
> > > example udev config:
> > > SUBSYSTEM=="net",
> > SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> > 
> > work as well.  But coupling the ifindex to the MAC address like this
> > doesn't work.  (In general, coupling any two unrelated attributes when
> > trying to do persistent names doesn't work.)
> > 
> Attaching the latest patch incorporating review comments.
> 
> By creating character devices for every network device, we can use
> udev to maintain alternate naming policies for devices, including
> additional names for the same device, without interfering with the
> name that the kernel assigns a device.
> 
> This is conditionalized on CONFIG_NET_CDEV.  If enabled (the default),
> device nodes will automatically be created in /dev/netdev/ for each
> network device.  (/dev/net/ is already populated by the tun device.)
> 
> These device nodes are not functional at the moment - open() returns
> -ENOSYS.  Their only purpose is to provide userspace with a kernel
> name to ifindex mapping, in a form that udev can easily manage.

How does this patch work with the network namespace functionality?

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Fri, Oct 09, 2009 at 09:00:01AM -0500, Narendra K wrote:
> On Fri, Oct 09, 2009 at 07:12:07PM +0530, K, Narendra wrote:
> > > example udev config:
> > > SUBSYSTEM="net",
> > SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> > 
> > work as well.  But coupling the ifindex to the MAC address like this
> > doesn't work.  (In general, coupling any two unrelated attributes when
> > trying to do persistent names doesn't work.)
> > 
> Attaching the latest patch incorporating review comments.
> 
> By creating character devices for every network device, we can use
> udev to maintain alternate naming policies for devices, including
> additional names for the same device, without interfering with the
> name that the kernel assigns a device.
> 
> This is conditionalized on CONFIG_NET_CDEV.  If enabled (the default),
> device nodes will automatically be created in /dev/netdev/ for each
> network device.  (/dev/net/ is already populated by the tun device.)
> 
> These device nodes are not functional at the moment - open() returns
> -ENOSYS.  Their only purpose is to provide userspace with a kernel
> name to ifindex mapping, in a form that udev can easily manage.

How does this patch work with the network namespace functionality?

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Marco d'Itri]

[-- Attachment #1: Type: text/plain, Size: 353 bytes --]

On Oct 09, Bryan Kadzban <bryan@kadzban.is-a-geek.net> wrote:

> > As has been noted here, MAC addresses are not necessarily unique to
> > an interface.
> Only in the case of e.g. qemu (virtual hardware), I think.  (Or some
> kinds of broken hardware.
Some Sun products have multiple interfaces sharing the same MAC address.

-- 
ciao,
Marco

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[Marco d'Itri]

[-- Attachment #1: Type: text/plain, Size: 353 bytes --]

On Oct 09, Bryan Kadzban <bryan@kadzban.is-a-geek.net> wrote:

> > As has been noted here, MAC addresses are not necessarily unique to
> > an interface.
> Only in the case of e.g. qemu (virtual hardware), I think.  (Or some
> kinds of broken hardware.
Some Sun products have multiple interfaces sharing the same MAC address.

-- 
ciao,
Marco

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Fri, Oct 09, 2009 at 09:36:13AM -0700, Greg KH wrote:
> On Fri, Oct 09, 2009 at 09:00:01AM -0500, Narendra K wrote:
> > On Fri, Oct 09, 2009 at 07:12:07PM +0530, K, Narendra wrote:
> > > > example udev config:
> > > > SUBSYSTEM=="net",
> > > SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> > > 
> > > work as well.  But coupling the ifindex to the MAC address like this
> > > doesn't work.  (In general, coupling any two unrelated attributes when
> > > trying to do persistent names doesn't work.)
> > > 
> > Attaching the latest patch incorporating review comments.
> > 
> > By creating character devices for every network device, we can use
> > udev to maintain alternate naming policies for devices, including
> > additional names for the same device, without interfering with the
> > name that the kernel assigns a device.
> > 
> > This is conditionalized on CONFIG_NET_CDEV.  If enabled (the default),
> > device nodes will automatically be created in /dev/netdev/ for each
> > network device.  (/dev/net/ is already populated by the tun device.)
> > 
> > These device nodes are not functional at the moment - open() returns
> > -ENOSYS.  Their only purpose is to provide userspace with a kernel
> > name to ifindex mapping, in a form that udev can easily manage.
> 
> How does this patch work with the network namespace functionality?

There is a monitonically increasing static ifindex kept in
net/core/dev.c:dev_new_index(), which is shared across all namespaces.
struct net_device ifindex field is assigned from this.  So two devices
in two different namespaces can't share an ifindex value.  However,
the device can be present (or not) in the per-namespace dev_name_hash
and dev_index_hashes.  This patch doesn't change this at all.

uevents aren't namespaced.  Presumably that means /dev can't be
polyinstantiated.  Therefore, all devnodes in /dev/netdev/* will be
visible to all processes, where 'ifconfig' and friends would only show
device names in the processes namespace.  This doesn't mean the app
can _do_ anything (it's the same as if it tried to act on a device
using an ifindex for a device not in its namespace), but yes, the fact
that such a device exists will be exposed.

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Fri, Oct 09, 2009 at 09:36:13AM -0700, Greg KH wrote:
> On Fri, Oct 09, 2009 at 09:00:01AM -0500, Narendra K wrote:
> > On Fri, Oct 09, 2009 at 07:12:07PM +0530, K, Narendra wrote:
> > > > example udev config:
> > > > SUBSYSTEM="net",
> > > SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> > > 
> > > work as well.  But coupling the ifindex to the MAC address like this
> > > doesn't work.  (In general, coupling any two unrelated attributes when
> > > trying to do persistent names doesn't work.)
> > > 
> > Attaching the latest patch incorporating review comments.
> > 
> > By creating character devices for every network device, we can use
> > udev to maintain alternate naming policies for devices, including
> > additional names for the same device, without interfering with the
> > name that the kernel assigns a device.
> > 
> > This is conditionalized on CONFIG_NET_CDEV.  If enabled (the default),
> > device nodes will automatically be created in /dev/netdev/ for each
> > network device.  (/dev/net/ is already populated by the tun device.)
> > 
> > These device nodes are not functional at the moment - open() returns
> > -ENOSYS.  Their only purpose is to provide userspace with a kernel
> > name to ifindex mapping, in a form that udev can easily manage.
> 
> How does this patch work with the network namespace functionality?

There is a monitonically increasing static ifindex kept in
net/core/dev.c:dev_new_index(), which is shared across all namespaces.
struct net_device ifindex field is assigned from this.  So two devices
in two different namespaces can't share an ifindex value.  However,
the device can be present (or not) in the per-namespace dev_name_hash
and dev_index_hashes.  This patch doesn't change this at all.

uevents aren't namespaced.  Presumably that means /dev can't be
polyinstantiated.  Therefore, all devnodes in /dev/netdev/* will be
visible to all processes, where 'ifconfig' and friends would only show
device names in the processes namespace.  This doesn't mean the app
can _do_ anything (it's the same as if it tried to act on a device
using an ifindex for a device not in its namespace), but yes, the fact
that such a device exists will be exposed.

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Fri, Oct 09, 2009 at 12:17:24PM -0500, Matt Domsch wrote:
> 
> uevents aren't namespaced.  Presumably that means /dev can't be
> polyinstantiated.  Therefore, all devnodes in /dev/netdev/* will be
> visible to all processes, where 'ifconfig' and friends would only show
> device names in the processes namespace.  This doesn't mean the app
> can _do_ anything (it's the same as if it tried to act on a device
> using an ifindex for a device not in its namespace), but yes, the fact
> that such a device exists will be exposed.

That's the problem that the sysfs namespace patches were trying to
address.

Now I'm not saying it is a valid thing to try to work with this kind of
crazy, I was just wondering how it would work out.  Looks like it
doesn't :)

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Fri, Oct 09, 2009 at 12:17:24PM -0500, Matt Domsch wrote:
> 
> uevents aren't namespaced.  Presumably that means /dev can't be
> polyinstantiated.  Therefore, all devnodes in /dev/netdev/* will be
> visible to all processes, where 'ifconfig' and friends would only show
> device names in the processes namespace.  This doesn't mean the app
> can _do_ anything (it's the same as if it tried to act on a device
> using an ifindex for a device not in its namespace), but yes, the fact
> that such a device exists will be exposed.

That's the problem that the sysfs namespace patches were trying to
address.

Now I'm not saying it is a valid thing to try to work with this kind of
crazy, I was just wondering how it would work out.  Looks like it
doesn't :)

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Fri, Oct 09, 2009 at 09:00:01AM -0500, Narendra K wrote:
> On Fri, Oct 09, 2009 at 07:12:07PM +0530, K, Narendra wrote:
> > > example udev config:
> > > SUBSYSTEM=="net",
> > SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> > 
> > work as well.  But coupling the ifindex to the MAC address like this
> > doesn't work.  (In general, coupling any two unrelated attributes when
> > trying to do persistent names doesn't work.)
> > 
> Attaching the latest patch incorporating review comments.

Same patch, rebased to linux-next.

By creating character devices for every network device, we can use
udev to maintain alternate naming policies for devices, including
additional names for the same device, without interfering with the
name that the kernel assigns a device.

This is conditionalized on CONFIG_NET_CDEV.  If enabled (the default),
device nodes will automatically be created in /dev/netdev/ for each
network device.  (/dev/net/ is already populated by the tun device.)

These device nodes are not functional at the moment - open() returns
-ENOSYS.  Their only purpose is to provide userspace with a kernel
name to ifindex mapping, in a form that udev can easily manage.

Signed-off-by: Jordan Hargrave <Jordan_Hargrave@dell.com>
Signed-off-by: Narendra K <Narendra_K@dell.com>
Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>

---
 include/linux/netdevice.h |    4 ++++
 net/Kconfig               |   10 ++++++++++
 net/core/Makefile         |    1 +
 net/core/cdev.c           |   42 ++++++++++++++++++++++++++++++++++++++++++
 net/core/cdev.h           |   13 +++++++++++++
 net/core/dev.c            |   10 ++++++++++
 net/core/net-sysfs.c      |   13 +++++++++++++
 7 files changed, 93 insertions(+), 0 deletions(-)
 create mode 100644 net/core/cdev.c
 create mode 100644 net/core/cdev.h

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index b332eef..a2f23b4 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -44,6 +44,7 @@
 #include <linux/workqueue.h>
 
 #include <linux/ethtool.h>
+#include <linux/cdev.h>
 #include <net/net_namespace.h>
 #include <net/dsa.h>
 #ifdef CONFIG_DCB
@@ -916,6 +917,9 @@ struct net_device
 	/* max exchange id for FCoE LRO by ddp */
 	unsigned int		fcoe_ddp_xid;
 #endif
+#ifdef CONFIG_NET_CDEV
+	struct cdev cdev;
+#endif
 };
 #define to_net_dev(d) container_of(d, struct net_device, dev)
 
diff --git a/net/Kconfig b/net/Kconfig
index 041c35e..bdc5bd7 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -43,6 +43,16 @@ config COMPAT_NETLINK_MESSAGES
 	  Newly written code should NEVER need this option but do
 	  compat-independent messages instead!
 
+config NET_CDEV
+       bool "/dev files for network devices"
+       default y
+       help
+         This option causes /dev entries to be created for each
+         network device.  This allows the use of udev to create
+         alternate device naming policies.
+
+	 If unsure, say Y.
+
 menu "Networking options"
 
 source "net/packet/Kconfig"
diff --git a/net/core/Makefile b/net/core/Makefile
index 796f46e..0b40d2c 100644
--- a/net/core/Makefile
+++ b/net/core/Makefile
@@ -19,4 +19,5 @@ obj-$(CONFIG_NET_DMA) += user_dma.o
 obj-$(CONFIG_FIB_RULES) += fib_rules.o
 obj-$(CONFIG_TRACEPOINTS) += net-traces.o
 obj-$(CONFIG_NET_DROP_MONITOR) += drop_monitor.o
+obj-$(CONFIG_NET_CDEV) += cdev.o
 
diff --git a/net/core/cdev.c b/net/core/cdev.c
new file mode 100644
index 0000000..1f36076
--- /dev/null
+++ b/net/core/cdev.c
@@ -0,0 +1,42 @@
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/netdevice.h>
+#include <linux/device.h>
+
+/* Used for network dynamic major number */
+static dev_t netdev_devt;
+
+static int netdev_cdev_open(struct inode *inode, struct file *filep)
+{
+	/* no operations on this device are implemented */
+	return -ENOSYS;
+}
+
+static const struct file_operations netdev_cdev_fops = {
+	.owner = THIS_MODULE,
+	.open = netdev_cdev_open,
+};
+
+void netdev_cdev_alloc(void)
+{
+	alloc_chrdev_region(&netdev_devt, 0, 1<<20, "net");
+}
+
+void netdev_cdev_init(struct net_device *dev)
+{
+	cdev_init(&dev->cdev, &netdev_cdev_fops);
+	cdev_add(&dev->cdev, MKDEV(MAJOR(netdev_devt), dev->ifindex), 1);
+
+}
+
+void netdev_cdev_del(struct net_device *dev)
+{
+	if (dev->cdev.dev)
+		cdev_del(&dev->cdev);
+}
+
+void netdev_cdev_kobj_init(struct device *dev, struct net_device *net)
+{
+	if (net->cdev.dev)
+		dev->devt = net->cdev.dev;
+}
diff --git a/net/core/cdev.h b/net/core/cdev.h
new file mode 100644
index 0000000..9cf5a90
--- /dev/null
+++ b/net/core/cdev.h
@@ -0,0 +1,13 @@
+#include <linux/netdevice.h>
+
+#ifdef CONFIG_NET_CDEV
+void netdev_cdev_alloc(void);
+void netdev_cdev_init(struct net_device *dev);
+void netdev_cdev_del(struct net_device *dev);
+void netdev_cdev_kobj_init(struct device *dev, struct net_device *net);
+#else
+static inline void netdev_cdev_alloc(void) {}
+static inline void netdev_cdev_init(struct net_device *dev) {}
+static inline void netdev_cdev_del(struct net_device *dev) {}
+static inline void netdev_cdev_kobj_init(struct device *dev, struct net_device *net) {}
+#endif
diff --git a/net/core/dev.c b/net/core/dev.c
index a74c8fd..d771438 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -129,6 +129,7 @@
 #include <trace/events/napi.h>
 
 #include "net-sysfs.h"
+#include "cdev.h"
 
 /* Instead of increasing this, you should create a hash table. */
 #define MAX_GRO_SKBS 8
@@ -4684,6 +4685,7 @@ static void rollback_registered(struct net_device *dev)
 
 	/* Remove entries from kobject tree */
 	netdev_unregister_kobject(dev);
+	netdev_cdev_del(dev);
 
 	synchronize_net();
 
@@ -4835,6 +4837,8 @@ int register_netdevice(struct net_device *dev)
 	if (dev->features & NETIF_F_SG)
 		dev->features |= NETIF_F_GSO;
 
+	netdev_cdev_init(dev);
+
 	netdev_initialize_kobject(dev);
 
 	ret = call_netdevice_notifiers(NETDEV_POST_INIT, dev);
@@ -4870,6 +4874,7 @@ out:
 	return ret;
 
 err_uninit:
+	netdev_cdev_del(dev);
 	if (dev->netdev_ops->ndo_uninit)
 		dev->netdev_ops->ndo_uninit(dev);
 	goto out;
@@ -5377,6 +5382,7 @@ int dev_change_net_namespace(struct net_device *dev, struct net *net, const char
 	dev_addr_discard(dev);
 
 	netdev_unregister_kobject(dev);
+	netdev_cdev_del(dev);
 
 	/* Actually switch the network namespace */
 	dev_net_set(dev, net);
@@ -5393,6 +5399,8 @@ int dev_change_net_namespace(struct net_device *dev, struct net *net, const char
 			dev->iflink = dev->ifindex;
 	}
 
+	netdev_cdev_init(dev);
+
 	/* Fixup kobjects */
 	err = netdev_register_kobject(dev);
 	WARN_ON(err);
@@ -5626,6 +5634,8 @@ static int __init net_dev_init(void)
 
 	BUG_ON(!dev_boot_phase);
 
+	netdev_cdev_alloc();
+
 	if (dev_proc_init())
 		goto out;
 
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 753c420..f4ee557 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -19,6 +19,7 @@
 #include <net/wext.h>
 
 #include "net-sysfs.h"
+#include "cdev.h"
 
 #ifdef CONFIG_SYSFS
 static const char fmt_hex[] = "%#x\n";
@@ -501,6 +502,14 @@ static void netdev_release(struct device *d)
 	kfree((char *)dev - dev->padded);
 }
 
+#ifdef CONFIG_NET_CDEV
+static char *netdev_devnode(struct device *d, mode_t *mode)
+{
+	struct net_device *dev = to_net_dev(d);
+	return kasprintf(GFP_KERNEL, "netdev/%s", dev->name);
+}
+#endif
+
 static struct class net_class = {
 	.name = "net",
 	.dev_release = netdev_release,
@@ -510,6 +519,9 @@ static struct class net_class = {
 #ifdef CONFIG_HOTPLUG
 	.dev_uevent = netdev_uevent,
 #endif
+#ifdef CONFIG_NET_CDEV
+	.devnode = netdev_devnode,
+#endif
 };
 
 /* Delete sysfs entries but hold kobject reference until after all
@@ -536,6 +548,7 @@ int netdev_register_kobject(struct net_device *net)
 	dev->class = &net_class;
 	dev->platform_data = net;
 	dev->groups = groups;
+	netdev_cdev_kobj_init(dev, net);
 
 	dev_set_name(dev, "%s", net->name);
 
-- 
1.6.0.6

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Fri, Oct 09, 2009 at 09:00:01AM -0500, Narendra K wrote:
> On Fri, Oct 09, 2009 at 07:12:07PM +0530, K, Narendra wrote:
> > > example udev config:
> > > SUBSYSTEM="net",
> > SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> > 
> > work as well.  But coupling the ifindex to the MAC address like this
> > doesn't work.  (In general, coupling any two unrelated attributes when
> > trying to do persistent names doesn't work.)
> > 
> Attaching the latest patch incorporating review comments.

Same patch, rebased to linux-next.

By creating character devices for every network device, we can use
udev to maintain alternate naming policies for devices, including
additional names for the same device, without interfering with the
name that the kernel assigns a device.

This is conditionalized on CONFIG_NET_CDEV.  If enabled (the default),
device nodes will automatically be created in /dev/netdev/ for each
network device.  (/dev/net/ is already populated by the tun device.)

These device nodes are not functional at the moment - open() returns
-ENOSYS.  Their only purpose is to provide userspace with a kernel
name to ifindex mapping, in a form that udev can easily manage.

Signed-off-by: Jordan Hargrave <Jordan_Hargrave@dell.com>
Signed-off-by: Narendra K <Narendra_K@dell.com>
Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>

---
 include/linux/netdevice.h |    4 ++++
 net/Kconfig               |   10 ++++++++++
 net/core/Makefile         |    1 +
 net/core/cdev.c           |   42 ++++++++++++++++++++++++++++++++++++++++++
 net/core/cdev.h           |   13 +++++++++++++
 net/core/dev.c            |   10 ++++++++++
 net/core/net-sysfs.c      |   13 +++++++++++++
 7 files changed, 93 insertions(+), 0 deletions(-)
 create mode 100644 net/core/cdev.c
 create mode 100644 net/core/cdev.h

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index b332eef..a2f23b4 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -44,6 +44,7 @@
 #include <linux/workqueue.h>
 
 #include <linux/ethtool.h>
+#include <linux/cdev.h>
 #include <net/net_namespace.h>
 #include <net/dsa.h>
 #ifdef CONFIG_DCB
@@ -916,6 +917,9 @@ struct net_device
 	/* max exchange id for FCoE LRO by ddp */
 	unsigned int		fcoe_ddp_xid;
 #endif
+#ifdef CONFIG_NET_CDEV
+	struct cdev cdev;
+#endif
 };
 #define to_net_dev(d) container_of(d, struct net_device, dev)
 
diff --git a/net/Kconfig b/net/Kconfig
index 041c35e..bdc5bd7 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -43,6 +43,16 @@ config COMPAT_NETLINK_MESSAGES
 	  Newly written code should NEVER need this option but do
 	  compat-independent messages instead!
 
+config NET_CDEV
+       bool "/dev files for network devices"
+       default y
+       help
+         This option causes /dev entries to be created for each
+         network device.  This allows the use of udev to create
+         alternate device naming policies.
+
+	 If unsure, say Y.
+
 menu "Networking options"
 
 source "net/packet/Kconfig"
diff --git a/net/core/Makefile b/net/core/Makefile
index 796f46e..0b40d2c 100644
--- a/net/core/Makefile
+++ b/net/core/Makefile
@@ -19,4 +19,5 @@ obj-$(CONFIG_NET_DMA) += user_dma.o
 obj-$(CONFIG_FIB_RULES) += fib_rules.o
 obj-$(CONFIG_TRACEPOINTS) += net-traces.o
 obj-$(CONFIG_NET_DROP_MONITOR) += drop_monitor.o
+obj-$(CONFIG_NET_CDEV) += cdev.o
 
diff --git a/net/core/cdev.c b/net/core/cdev.c
new file mode 100644
index 0000000..1f36076
--- /dev/null
+++ b/net/core/cdev.c
@@ -0,0 +1,42 @@
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/netdevice.h>
+#include <linux/device.h>
+
+/* Used for network dynamic major number */
+static dev_t netdev_devt;
+
+static int netdev_cdev_open(struct inode *inode, struct file *filep)
+{
+	/* no operations on this device are implemented */
+	return -ENOSYS;
+}
+
+static const struct file_operations netdev_cdev_fops = {
+	.owner = THIS_MODULE,
+	.open = netdev_cdev_open,
+};
+
+void netdev_cdev_alloc(void)
+{
+	alloc_chrdev_region(&netdev_devt, 0, 1<<20, "net");
+}
+
+void netdev_cdev_init(struct net_device *dev)
+{
+	cdev_init(&dev->cdev, &netdev_cdev_fops);
+	cdev_add(&dev->cdev, MKDEV(MAJOR(netdev_devt), dev->ifindex), 1);
+
+}
+
+void netdev_cdev_del(struct net_device *dev)
+{
+	if (dev->cdev.dev)
+		cdev_del(&dev->cdev);
+}
+
+void netdev_cdev_kobj_init(struct device *dev, struct net_device *net)
+{
+	if (net->cdev.dev)
+		dev->devt = net->cdev.dev;
+}
diff --git a/net/core/cdev.h b/net/core/cdev.h
new file mode 100644
index 0000000..9cf5a90
--- /dev/null
+++ b/net/core/cdev.h
@@ -0,0 +1,13 @@
+#include <linux/netdevice.h>
+
+#ifdef CONFIG_NET_CDEV
+void netdev_cdev_alloc(void);
+void netdev_cdev_init(struct net_device *dev);
+void netdev_cdev_del(struct net_device *dev);
+void netdev_cdev_kobj_init(struct device *dev, struct net_device *net);
+#else
+static inline void netdev_cdev_alloc(void) {}
+static inline void netdev_cdev_init(struct net_device *dev) {}
+static inline void netdev_cdev_del(struct net_device *dev) {}
+static inline void netdev_cdev_kobj_init(struct device *dev, struct net_device *net) {}
+#endif
diff --git a/net/core/dev.c b/net/core/dev.c
index a74c8fd..d771438 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -129,6 +129,7 @@
 #include <trace/events/napi.h>
 
 #include "net-sysfs.h"
+#include "cdev.h"
 
 /* Instead of increasing this, you should create a hash table. */
 #define MAX_GRO_SKBS 8
@@ -4684,6 +4685,7 @@ static void rollback_registered(struct net_device *dev)
 
 	/* Remove entries from kobject tree */
 	netdev_unregister_kobject(dev);
+	netdev_cdev_del(dev);
 
 	synchronize_net();
 
@@ -4835,6 +4837,8 @@ int register_netdevice(struct net_device *dev)
 	if (dev->features & NETIF_F_SG)
 		dev->features |= NETIF_F_GSO;
 
+	netdev_cdev_init(dev);
+
 	netdev_initialize_kobject(dev);
 
 	ret = call_netdevice_notifiers(NETDEV_POST_INIT, dev);
@@ -4870,6 +4874,7 @@ out:
 	return ret;
 
 err_uninit:
+	netdev_cdev_del(dev);
 	if (dev->netdev_ops->ndo_uninit)
 		dev->netdev_ops->ndo_uninit(dev);
 	goto out;
@@ -5377,6 +5382,7 @@ int dev_change_net_namespace(struct net_device *dev, struct net *net, const char
 	dev_addr_discard(dev);
 
 	netdev_unregister_kobject(dev);
+	netdev_cdev_del(dev);
 
 	/* Actually switch the network namespace */
 	dev_net_set(dev, net);
@@ -5393,6 +5399,8 @@ int dev_change_net_namespace(struct net_device *dev, struct net *net, const char
 			dev->iflink = dev->ifindex;
 	}
 
+	netdev_cdev_init(dev);
+
 	/* Fixup kobjects */
 	err = netdev_register_kobject(dev);
 	WARN_ON(err);
@@ -5626,6 +5634,8 @@ static int __init net_dev_init(void)
 
 	BUG_ON(!dev_boot_phase);
 
+	netdev_cdev_alloc();
+
 	if (dev_proc_init())
 		goto out;
 
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 753c420..f4ee557 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -19,6 +19,7 @@
 #include <net/wext.h>
 
 #include "net-sysfs.h"
+#include "cdev.h"
 
 #ifdef CONFIG_SYSFS
 static const char fmt_hex[] = "%#x\n";
@@ -501,6 +502,14 @@ static void netdev_release(struct device *d)
 	kfree((char *)dev - dev->padded);
 }
 
+#ifdef CONFIG_NET_CDEV
+static char *netdev_devnode(struct device *d, mode_t *mode)
+{
+	struct net_device *dev = to_net_dev(d);
+	return kasprintf(GFP_KERNEL, "netdev/%s", dev->name);
+}
+#endif
+
 static struct class net_class = {
 	.name = "net",
 	.dev_release = netdev_release,
@@ -510,6 +519,9 @@ static struct class net_class = {
 #ifdef CONFIG_HOTPLUG
 	.dev_uevent = netdev_uevent,
 #endif
+#ifdef CONFIG_NET_CDEV
+	.devnode = netdev_devnode,
+#endif
 };
 
 /* Delete sysfs entries but hold kobject reference until after all
@@ -536,6 +548,7 @@ int netdev_register_kobject(struct net_device *net)
 	dev->class = &net_class;
 	dev->platform_data = net;
 	dev->groups = groups;
+	netdev_cdev_kobj_init(dev, net);
 
 	dev_set_name(dev, "%s", net->name);
 
-- 
1.6.0.6

Re: PATCH: Network Device Naming mechanism and policy

[Stephen Hemminger]

On Fri, 9 Oct 2009 16:09:09 -0500
Matt Domsch <Matt_Domsch@dell.com> wrote:

> On Fri, Oct 09, 2009 at 09:00:01AM -0500, Narendra K wrote:
> > On Fri, Oct 09, 2009 at 07:12:07PM +0530, K, Narendra wrote:
> > > > example udev config:
> > > > SUBSYSTEM=="net",
> > > SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> > > 
> > > work as well.  But coupling the ifindex to the MAC address like this
> > > doesn't work.  (In general, coupling any two unrelated attributes when
> > > trying to do persistent names doesn't work.)
> > > 
> > Attaching the latest patch incorporating review comments.
> 
> Same patch, rebased to linux-next.
> 
> By creating character devices for every network device, we can use
> udev to maintain alternate naming policies for devices, including
> additional names for the same device, without interfering with the
> name that the kernel assigns a device.
> 
> This is conditionalized on CONFIG_NET_CDEV.  If enabled (the default),
> device nodes will automatically be created in /dev/netdev/ for each
> network device.  (/dev/net/ is already populated by the tun device.)
> 
> These device nodes are not functional at the moment - open() returns
> -ENOSYS.  Their only purpose is to provide userspace with a kernel
> name to ifindex mapping, in a form that udev can easily manage.
> 
> Signed-off-by: Jordan Hargrave <Jordan_Hargrave@dell.com>
> Signed-off-by: Narendra K <Narendra_K@dell.com>
> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>

Maybe I'm dense but can't see why having a useless /dev/net/ symlinks
is a good interface choice. Perhaps you should explain the race between
PCI scan and udev in more detail, and why solving it in either of those
places won't work. As it stands you are proposing yet another wart to
the already complex set of network interface API's which has implications
for security as well as increasing the number of possible bugs.

-- 

Re: PATCH: Network Device Naming mechanism and policy

[Stephen Hemminger]

On Fri, 9 Oct 2009 16:09:09 -0500
Matt Domsch <Matt_Domsch@dell.com> wrote:

> On Fri, Oct 09, 2009 at 09:00:01AM -0500, Narendra K wrote:
> > On Fri, Oct 09, 2009 at 07:12:07PM +0530, K, Narendra wrote:
> > > > example udev config:
> > > > SUBSYSTEM="net",
> > > SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> > > 
> > > work as well.  But coupling the ifindex to the MAC address like this
> > > doesn't work.  (In general, coupling any two unrelated attributes when
> > > trying to do persistent names doesn't work.)
> > > 
> > Attaching the latest patch incorporating review comments.
> 
> Same patch, rebased to linux-next.
> 
> By creating character devices for every network device, we can use
> udev to maintain alternate naming policies for devices, including
> additional names for the same device, without interfering with the
> name that the kernel assigns a device.
> 
> This is conditionalized on CONFIG_NET_CDEV.  If enabled (the default),
> device nodes will automatically be created in /dev/netdev/ for each
> network device.  (/dev/net/ is already populated by the tun device.)
> 
> These device nodes are not functional at the moment - open() returns
> -ENOSYS.  Their only purpose is to provide userspace with a kernel
> name to ifindex mapping, in a form that udev can easily manage.
> 
> Signed-off-by: Jordan Hargrave <Jordan_Hargrave@dell.com>
> Signed-off-by: Narendra K <Narendra_K@dell.com>
> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>

Maybe I'm dense but can't see why having a useless /dev/net/ symlinks
is a good interface choice. Perhaps you should explain the race between
PCI scan and udev in more detail, and why solving it in either of those
places won't work. As it stands you are proposing yet another wart to
the already complex set of network interface API's which has implications
for security as well as increasing the number of possible bugs.

-- 

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Fri, Oct 09, 2009 at 07:44:01PM -0700, Stephen Hemminger wrote:
> Maybe I'm dense but can't see why having a useless /dev/net/ symlinks
> is a good interface choice. Perhaps you should explain the race between
> PCI scan and udev in more detail, and why solving it in either of those
> places won't work. As it stands you are proposing yet another wart to
> the already complex set of network interface API's which has implications
> for security as well as increasing the number of possible bugs.

The fundamental challenge is that system administrators, particularly
those of server-class hardware with multiple network ports present
(some on the motherboard, some on add-in cards), have the
not-so-unreasonable expectation that there is a deterministic mapping
between those ports and the name one uses to address those ports.

The fundamental roadblock to this is that enumeration != naming,
except that it is for network devices, and we keep changing the
enumeration order.

Today, port naming is completely nondeterministic.  If you have but
one NIC, there are few chances to get the name wrong (it'll be eth0).
If you have >1 NIC, chances increase to get it wrong.

The complexity arises at multiple levels.

First, device driver load order.  In the 2.4 kernel days, and even
mostly early 2.6 kernel days, the order in which network drivers
loaded played a role in determining the name of the device.  Drivers
loaded first would get their devices named first.  If I have two types
of devices, say an e100-driven NIC and a tg3-driven NIC, I could
figure out that the names would be eth0=e100 and eth1=tg3 by setting
the load order in /etc/modules.conf (now modprobe.conf).  If I wanted
the other order, fine, just switch it around in modules.conf and
reboot.  OS installers, being the first running instance of Linux,
before modprobe.conf existed to set that ordering, had to have other
mechanisms to load drivers (often manually, or if programmatically
such as in a kickstart or autoyast file, was still somewhat fixed).

With the advent of modaliases + udev, now modprobe.conf doesn't
contain this ordering anymore, and udev loads the drivers.  So while
it wasn't perfect, it was better than nothing, and that's gone now.

It gets even worse as, to speed up boot time, modprobes can be run in
parallel, and even within individual drivers, the NICs get initialized
(and named) in parallel.  Further confusing things, some devices need
firmware loaded into them before getting names assigned, which is done
from userspace, and they race.

Second, PCI device list order.  In the 2.4 kernel days, the PCI device
list was scanned "breadth-first" (for each bus; for each device; for
each function; do load...).  FWIW, Windows still does this.  It gives
BIOS, which assigns PCI bus numbers, a chance to put LOMs at a lower
bus number than add-in cards.  Module load order still mattered, but
at least if you had say 2 e1000 ports as LOMs, and 2 e1000 ports on
add-in cards, you pretty much knew the ordering would be eth0 as
lowest bdf on the motherboard, eth1 as next bdf on the motherboard,
and eth2 and 3 as the add-in cards in ascending slot order.

With the advent of PCI hot plug in the 2.5 kernel series, the
breadth-first ordering became depth-first.    (for each bus; for each
device; if the device is a bridge, scan the busses behind it.).  This
caused NICs on bus 0 device 5, and bus 1 device 3, (eth0 and 1
respectively) to be enumerated differently due to the  a bridge from
bus 0 to bus 1 at 0:4.  My crude hack of pci=bfsort, with some dmi
strings to match and auto-enable, at least reverted this back to the
ordering the 2.4 kernel and Windows used.  Now we have to keep adding
systems to this DMI list (Dell has a number of systems on this list
today; HP has even more).  And it doesn't completely solve the
problem, just masks it.

So, to address the ordering problem, I placed a constraint on our
server hardware teams, forcing them to lay out their boards and assign
PCIe lanes and bus numbers, such that at least the designed "first"
LOM would get found first in either depth-first or breadth-first
order.  Our 10G and 11G servers have this restriction in place, though
it wasn't easy.  And it's gotten even harder, as the PCIe switches
expand the number of lanes available.  We no longer have the
traditional tiered buses architecture, but the PCI layer for this
purpose thinks we do.  I need to remove this constraint on the
hardware teams - it's gotten to be impossible for the chipset lanes to
be laid out efficiently with this constraint.

All of the above just papered over the enumeration != naming problem.

Third, stateless computing is becoming more and more commonplace.  The
Field Replaceable Unit is the server itself.  Got a bad server?  Pull
it out, move the disks to an identical unit, insert the new server,
and go.  Fix the bad server offline and bring it back.  In this model,
having MAC addresses as the mechanism that is providing the
determinism (/etc/mactab or udev persistent naming rules) breaks,
because the MAC addresses of the ports on the new server won't be the
same as on the old server.  HP even has a technology to solve _this_
problem (in their blade chassis) - Virtual Connect.  The MACs get
assigned by the chassis to the blades at POST, and are fixed to the
slot.  Slick, and Dell has an even more flexible similar feature
FlexAddress.  This doesn't solve the OS installer problem of "which of
these NICs should I use to do an install?" but it does recognize the
problem space and tries to overcome it.

Fourth, for OS installers, choosing which NIC to use at installtime,
when all the NICs are plugged in, can be difficult.  PXE environments,
using pxelinux and its IPAPPEND 2 option, will append
"BOOTIF=xx:xx:xx:xx:xx:xx" to the kernel command line, that
containing the MAC address of the NIC used for PXE.  Neat trick.  Yes,
we then had to teach the OS installers to recognize and use this.  But
it only works if you PXE boot, and only for that one NIC.

Fifth, network devices can have only a single name.  eth0.  If we look
at disks, we see udev manages a tree of symlinks for
/dev/disk/by-label, /dev/disk/by-path, /dev/disk/by-uuid. And as a
system admin, if I wanted to also create a udev rule for
/dev/disk/by-function (boot, swap, mattsstorage), it's trivial to do
so.  Why can't we have this flexibility for network devices too?

So, how do we get deterministic naming for all the NICs in a system?
That's what I'm going for.  Picture a network switch, with several
blades, and several ports on each blade.  The network admin addresses
each port as say 1/16 (the 16th port on blade 1, clearly labeled).
The parallel on servers is the chassis label printed on the outside
(say, "Gb1").  But due the above, there is no guarantee, and in fact
little chance, that Gb1 will be consistently named eth0 - it may vary
from boot to boot.  That's full of fail.

For a concrete example, the 4 bnx2 chips in my PowerEdge R610 with a
current 2.6 kernel, loading only one driver, the ports get assigned
names in nondeterministic order on each boot.  Given that the
ifcfg-eth* rules, netfilter rules, and the rest all expect
deterministic naming, massive failure ensues unless some form of
determinism is brought back in.

The idea to use a character device node to expose the ifindex value,
and udev to manage a tree of symlinks to it, really follows the model
used today for disks.  It allows us to get deterministic names for
devices (albeit, the names are symlinks), and multiple names for
devices (through multiple symlink rules).  That some people want to
use the char device to call ioctl() and read/write, as is possible on
the BSDs, would just be gravy IMHO.

It does require a change in behavior for a system administrator.
Instead of hard-coding 'eth0' into her scripts, she uses
'/dev/net/by-function/boot' or somesuch.  But then that name is
guaranteed to always refer to the "right" NIC.  Every admin I've
spoken to is willing to make this kind of change, as long as they get
the consistent, deterministic naming they expect but don't have
today.  And it does require patching userspace apps to take both a
kernel device name, or a path, and to resolve the path to device name
or ifindex.  We wrote libnetdevname (really, one function), and have
patches for several userspace apps to use it, to prove it can be done.

One alternative would be to do something using the sysfs ifindex value
already exported.  e.g.
  /sys/devices/pci0000:00/0000:00:05.0/0000:05:00.0/0000:06:07.0/net/eth0/ifindex

but we have never had symlinks from /dev into /sys before (doesn't
mean we couldn't though).  In that case, udev would grow to manage
/dev/net/by-chassis-label/Embedded_NIC_1 -> /sys/devices/.../net/eth0,
and libnetdevname would be used to follow the symlink in applications.
This approach could solve my problem without (many or any?) kernel
changes needed, but wouldn't help those who want to do
ioctl/read/write to a devnode.

Given the problem, I really do need a solution.  I've proposed one
method, and an alternative, but I can't afford to let the problem stay
unaddressed any longer, and need a clear direction to be chosen.  The
char device gives me what I need, and others what they want also.

Thanks for listening to the diatribe.  For more examples and
workarounds that we've been telling our customers for several years,
check out http://linux.dell.com/papers.shtml for the Network Interface
Card Naming whitepaper.


-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Fri, Oct 09, 2009 at 07:44:01PM -0700, Stephen Hemminger wrote:
> Maybe I'm dense but can't see why having a useless /dev/net/ symlinks
> is a good interface choice. Perhaps you should explain the race between
> PCI scan and udev in more detail, and why solving it in either of those
> places won't work. As it stands you are proposing yet another wart to
> the already complex set of network interface API's which has implications
> for security as well as increasing the number of possible bugs.

The fundamental challenge is that system administrators, particularly
those of server-class hardware with multiple network ports present
(some on the motherboard, some on add-in cards), have the
not-so-unreasonable expectation that there is a deterministic mapping
between those ports and the name one uses to address those ports.

The fundamental roadblock to this is that enumeration != naming,
except that it is for network devices, and we keep changing the
enumeration order.

Today, port naming is completely nondeterministic.  If you have but
one NIC, there are few chances to get the name wrong (it'll be eth0).
If you have >1 NIC, chances increase to get it wrong.

The complexity arises at multiple levels.

First, device driver load order.  In the 2.4 kernel days, and even
mostly early 2.6 kernel days, the order in which network drivers
loaded played a role in determining the name of the device.  Drivers
loaded first would get their devices named first.  If I have two types
of devices, say an e100-driven NIC and a tg3-driven NIC, I could
figure out that the names would be eth0á00 and eth1=tg3 by setting
the load order in /etc/modules.conf (now modprobe.conf).  If I wanted
the other order, fine, just switch it around in modules.conf and
reboot.  OS installers, being the first running instance of Linux,
before modprobe.conf existed to set that ordering, had to have other
mechanisms to load drivers (often manually, or if programmatically
such as in a kickstart or autoyast file, was still somewhat fixed).

With the advent of modaliases + udev, now modprobe.conf doesn't
contain this ordering anymore, and udev loads the drivers.  So while
it wasn't perfect, it was better than nothing, and that's gone now.

It gets even worse as, to speed up boot time, modprobes can be run in
parallel, and even within individual drivers, the NICs get initialized
(and named) in parallel.  Further confusing things, some devices need
firmware loaded into them before getting names assigned, which is done
from userspace, and they race.

Second, PCI device list order.  In the 2.4 kernel days, the PCI device
list was scanned "breadth-first" (for each bus; for each device; for
each function; do load...).  FWIW, Windows still does this.  It gives
BIOS, which assigns PCI bus numbers, a chance to put LOMs at a lower
bus number than add-in cards.  Module load order still mattered, but
at least if you had say 2 e1000 ports as LOMs, and 2 e1000 ports on
add-in cards, you pretty much knew the ordering would be eth0 as
lowest bdf on the motherboard, eth1 as next bdf on the motherboard,
and eth2 and 3 as the add-in cards in ascending slot order.

With the advent of PCI hot plug in the 2.5 kernel series, the
breadth-first ordering became depth-first.    (for each bus; for each
device; if the device is a bridge, scan the busses behind it.).  This
caused NICs on bus 0 device 5, and bus 1 device 3, (eth0 and 1
respectively) to be enumerated differently due to the  a bridge from
bus 0 to bus 1 at 0:4.  My crude hack of pci¿sort, with some dmi
strings to match and auto-enable, at least reverted this back to the
ordering the 2.4 kernel and Windows used.  Now we have to keep adding
systems to this DMI list (Dell has a number of systems on this list
today; HP has even more).  And it doesn't completely solve the
problem, just masks it.

So, to address the ordering problem, I placed a constraint on our
server hardware teams, forcing them to lay out their boards and assign
PCIe lanes and bus numbers, such that at least the designed "first"
LOM would get found first in either depth-first or breadth-first
order.  Our 10G and 11G servers have this restriction in place, though
it wasn't easy.  And it's gotten even harder, as the PCIe switches
expand the number of lanes available.  We no longer have the
traditional tiered buses architecture, but the PCI layer for this
purpose thinks we do.  I need to remove this constraint on the
hardware teams - it's gotten to be impossible for the chipset lanes to
be laid out efficiently with this constraint.

All of the above just papered over the enumeration != naming problem.

Third, stateless computing is becoming more and more commonplace.  The
Field Replaceable Unit is the server itself.  Got a bad server?  Pull
it out, move the disks to an identical unit, insert the new server,
and go.  Fix the bad server offline and bring it back.  In this model,
having MAC addresses as the mechanism that is providing the
determinism (/etc/mactab or udev persistent naming rules) breaks,
because the MAC addresses of the ports on the new server won't be the
same as on the old server.  HP even has a technology to solve _this_
problem (in their blade chassis) - Virtual Connect.  The MACs get
assigned by the chassis to the blades at POST, and are fixed to the
slot.  Slick, and Dell has an even more flexible similar feature
FlexAddress.  This doesn't solve the OS installer problem of "which of
these NICs should I use to do an install?" but it does recognize the
problem space and tries to overcome it.

Fourth, for OS installers, choosing which NIC to use at installtime,
when all the NICs are plugged in, can be difficult.  PXE environments,
using pxelinux and its IPAPPEND 2 option, will append
"BOOTIF=xx:xx:xx:xx:xx:xx" to the kernel command line, that
containing the MAC address of the NIC used for PXE.  Neat trick.  Yes,
we then had to teach the OS installers to recognize and use this.  But
it only works if you PXE boot, and only for that one NIC.

Fifth, network devices can have only a single name.  eth0.  If we look
at disks, we see udev manages a tree of symlinks for
/dev/disk/by-label, /dev/disk/by-path, /dev/disk/by-uuid. And as a
system admin, if I wanted to also create a udev rule for
/dev/disk/by-function (boot, swap, mattsstorage), it's trivial to do
so.  Why can't we have this flexibility for network devices too?

So, how do we get deterministic naming for all the NICs in a system?
That's what I'm going for.  Picture a network switch, with several
blades, and several ports on each blade.  The network admin addresses
each port as say 1/16 (the 16th port on blade 1, clearly labeled).
The parallel on servers is the chassis label printed on the outside
(say, "Gb1").  But due the above, there is no guarantee, and in fact
little chance, that Gb1 will be consistently named eth0 - it may vary
from boot to boot.  That's full of fail.

For a concrete example, the 4 bnx2 chips in my PowerEdge R610 with a
current 2.6 kernel, loading only one driver, the ports get assigned
names in nondeterministic order on each boot.  Given that the
ifcfg-eth* rules, netfilter rules, and the rest all expect
deterministic naming, massive failure ensues unless some form of
determinism is brought back in.

The idea to use a character device node to expose the ifindex value,
and udev to manage a tree of symlinks to it, really follows the model
used today for disks.  It allows us to get deterministic names for
devices (albeit, the names are symlinks), and multiple names for
devices (through multiple symlink rules).  That some people want to
use the char device to call ioctl() and read/write, as is possible on
the BSDs, would just be gravy IMHO.

It does require a change in behavior for a system administrator.
Instead of hard-coding 'eth0' into her scripts, she uses
'/dev/net/by-function/boot' or somesuch.  But then that name is
guaranteed to always refer to the "right" NIC.  Every admin I've
spoken to is willing to make this kind of change, as long as they get
the consistent, deterministic naming they expect but don't have
today.  And it does require patching userspace apps to take both a
kernel device name, or a path, and to resolve the path to device name
or ifindex.  We wrote libnetdevname (really, one function), and have
patches for several userspace apps to use it, to prove it can be done.

One alternative would be to do something using the sysfs ifindex value
already exported.  e.g.
  /sys/devices/pci0000:00/0000:00:05.0/0000:05:00.0/0000:06:07.0/net/eth0/ifindex

but we have never had symlinks from /dev into /sys before (doesn't
mean we couldn't though).  In that case, udev would grow to manage
/dev/net/by-chassis-label/Embedded_NIC_1 -> /sys/devices/.../net/eth0,
and libnetdevname would be used to follow the symlink in applications.
This approach could solve my problem without (many or any?) kernel
changes needed, but wouldn't help those who want to do
ioctl/read/write to a devnode.

Given the problem, I really do need a solution.  I've proposed one
method, and an alternative, but I can't afford to let the problem stay
unaddressed any longer, and need a clear direction to be chosen.  The
char device gives me what I need, and others what they want also.

Thanks for listening to the diatribe.  For more examples and
workarounds that we've been telling our customers for several years,
check out http://linux.dell.com/papers.shtml for the Network Interface
Card Naming whitepaper.


-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Fri, Oct 09, 2009 at 11:40:57PM -0500, Matt Domsch wrote:
> The fundamental roadblock to this is that enumeration != naming,
> except that it is for network devices, and we keep changing the
> enumeration order.

No, the hardware changes the enumeration order, it places _no_
guarantees on what order stuff will be found in.  So this is not the
kernel changing, just to be clear.

Again, I have a machine here that likes to reorder PCI devices every 4th
or so boot times, and that's fine according to the PCI spec.  Yeah, it's
a crappy BIOS, but the manufacturer rightly pointed out that it is not
in violation of anything.

> Today, port naming is completely nondeterministic.  If you have but
> one NIC, there are few chances to get the name wrong (it'll be eth0).
> If you have >1 NIC, chances increase to get it wrong.

That is why all distros name network devices based on the only
deterministic thing they have today, the MAC address.  I still fail to
see why you do not like this solution, it is honestly the only way to
properly name network devices in a sane manner.

All distros also provide a way to easily rename the network devices, to
place a specific name on a specific MAC address, so again, this should
all be solved already.

No matter how badly your BIOS teams mess up the PCI enumeration order :)

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Fri, Oct 09, 2009 at 11:40:57PM -0500, Matt Domsch wrote:
> The fundamental roadblock to this is that enumeration != naming,
> except that it is for network devices, and we keep changing the
> enumeration order.

No, the hardware changes the enumeration order, it places _no_
guarantees on what order stuff will be found in.  So this is not the
kernel changing, just to be clear.

Again, I have a machine here that likes to reorder PCI devices every 4th
or so boot times, and that's fine according to the PCI spec.  Yeah, it's
a crappy BIOS, but the manufacturer rightly pointed out that it is not
in violation of anything.

> Today, port naming is completely nondeterministic.  If you have but
> one NIC, there are few chances to get the name wrong (it'll be eth0).
> If you have >1 NIC, chances increase to get it wrong.

That is why all distros name network devices based on the only
deterministic thing they have today, the MAC address.  I still fail to
see why you do not like this solution, it is honestly the only way to
properly name network devices in a sane manner.

All distros also provide a way to easily rename the network devices, to
place a specific name on a specific MAC address, so again, this should
all be solved already.

No matter how badly your BIOS teams mess up the PCI enumeration order :)

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Sujit K M]

Greg,


> No, the hardware changes the enumeration order, it places _no_
> guarantees on what order stuff will be found in.  So this is not the
> kernel changing, just to be clear.
> Again, I have a machine here that likes to reorder PCI devices every 4th
> or so boot times, and that's fine according to the PCI spec.  Yeah, it's
> a crappy BIOS, but the manufacturer rightly pointed out that it is not
> in violation of anything.
>

I think the open call should be implemented then. By the patch very little
knowledge is being shared on type of network implementation it is trying to
do.Also it is messing with core datastructure and procedures. This seems
to be simplified by changing implementing the other operations like poll().

> That is why all distros name network devices based on the only
> deterministic thing they have today, the MAC address.  I still fail to
> see why you do not like this solution, it is honestly the only way to
> properly name network devices in a sane manner.

This is feature that needs to be implemented. As per the rules followed.

>
> All distros also provide a way to easily rename the network devices, to
> place a specific name on a specific MAC address, so again, this should
> all be solved already.
>
> No matter how badly your BIOS teams mess up the PCI enumeration order :)

This is an problem, But I think this can be solved by implementing some of the
routines in the network device.

Re: PATCH: Network Device Naming mechanism and policy

[Sujit K M]

Greg,


> No, the hardware changes the enumeration order, it places _no_
> guarantees on what order stuff will be found in.  So this is not the
> kernel changing, just to be clear.
> Again, I have a machine here that likes to reorder PCI devices every 4th
> or so boot times, and that's fine according to the PCI spec.  Yeah, it's
> a crappy BIOS, but the manufacturer rightly pointed out that it is not
> in violation of anything.
>

I think the open call should be implemented then. By the patch very little
knowledge is being shared on type of network implementation it is trying to
do.Also it is messing with core datastructure and procedures. This seems
to be simplified by changing implementing the other operations like poll().

> That is why all distros name network devices based on the only
> deterministic thing they have today, the MAC address.  I still fail to
> see why you do not like this solution, it is honestly the only way to
> properly name network devices in a sane manner.

This is feature that needs to be implemented. As per the rules followed.

>
> All distros also provide a way to easily rename the network devices, to
> place a specific name on a specific MAC address, so again, this should
> all be solved already.
>
> No matter how badly your BIOS teams mess up the PCI enumeration order :)

This is an problem, But I think this can be solved by implementing some of the
routines in the network device.

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Fri, Oct 09, 2009 at 10:23:08PM -0700, Greg KH wrote:
> On Fri, Oct 09, 2009 at 11:40:57PM -0500, Matt Domsch wrote:
> > The fundamental roadblock to this is that enumeration != naming,
> > except that it is for network devices, and we keep changing the
> > enumeration order.
> 
> No, the hardware changes the enumeration order, it places _no_
> guarantees on what order stuff will be found in.  So this is not the
> kernel changing, just to be clear.

Over time the kernel has changed its enumeration mechanisms, and
introduced parallelism into the process (which is a good thing),
which, from a user perspective, makes names nondeterministic.  Yes,
fixing this up by hard-coding MAC addresses after install has been
the traditional mechanism to address this.  I think there's a better
way.

> Again, I have a machine here that likes to reorder PCI devices every 4th
> or so boot times, and that's fine according to the PCI spec.  Yeah, it's
> a crappy BIOS, but the manufacturer rightly pointed out that it is not
> in violation of anything.

I haven't encounted this myself, but yes, it's valid but annoying.
 
> > Today, port naming is completely nondeterministic.  If you have but
> > one NIC, there are few chances to get the name wrong (it'll be eth0).
> > If you have >1 NIC, chances increase to get it wrong.
> 
> That is why all distros name network devices based on the only
> deterministic thing they have today, the MAC address.  I still fail to
> see why you do not like this solution, it is honestly the only way to
> properly name network devices in a sane manner.
>
> All distros also provide a way to easily rename the network devices, to
> place a specific name on a specific MAC address, so again, this should
> all be solved already.

It's not the only way, it introduces state where there's a desire for
a stateless solution, it's useless for getting all the names right at
initial OS install time, and it restricts us to a single "name" for a
given device.

We can get additional information from BIOS.  SMBIOS 2.6 (types 9 and
41) has the fields to let us get a "label" for an device at a given
b/d/f.  On my PowerEdge R610, I see "Embedded NIC 1" .. "Embedded NIC
4" for the 4 LOMs.  These labels have a clear correlation to the
labels on the back of the chassis at these ports.  biosdevname can
parse and report this.  HP made a similar vendor-specific extension to
SMBIOS for their platforms, which biosdevname also parses.  Even if
BIOS decides they need to renumber the busses on every boot, it can
keep this table correct.  (insert general mistrust of BIOS authors
rant; that's not the point here.)

biosdevname can be used in udev rules to create multiple names for a
given device.  Rules such as:

 PROGRAM="/sbin/biosdevname --policy=all_names -i %k", SYMLINK+="net/by-slot-name/%c", OPTIONS+="string_escape=replace"
 PROGRAM="/sbin/biosdevname --policy=smbios_names -i %k", SYMLINK+="net/by-chassis-label/%c", OPTIONS+="string_escape=replace"

SMBIOS has its own problems, specifically that it's not hot-plug
aware (it's a static table created during POST).  And if a better way
is found (perhaps through the PCI SIG or ACPI), great, biosdevname can
be extended to use it.  But, without at least a change in udev or the
kernel, it doesn't do any good.
 
> No matter how badly your BIOS teams mess up the PCI enumeration
> order :)

In my case, the BIOS for a given system always configures the ports
the same way, and assigns b/d/f the same way.  With no change in the
BIOS or hardware, I still see the ports enumerated differently on each
boot. :-(



-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Fri, Oct 09, 2009 at 10:23:08PM -0700, Greg KH wrote:
> On Fri, Oct 09, 2009 at 11:40:57PM -0500, Matt Domsch wrote:
> > The fundamental roadblock to this is that enumeration != naming,
> > except that it is for network devices, and we keep changing the
> > enumeration order.
> 
> No, the hardware changes the enumeration order, it places _no_
> guarantees on what order stuff will be found in.  So this is not the
> kernel changing, just to be clear.

Over time the kernel has changed its enumeration mechanisms, and
introduced parallelism into the process (which is a good thing),
which, from a user perspective, makes names nondeterministic.  Yes,
fixing this up by hard-coding MAC addresses after install has been
the traditional mechanism to address this.  I think there's a better
way.

> Again, I have a machine here that likes to reorder PCI devices every 4th
> or so boot times, and that's fine according to the PCI spec.  Yeah, it's
> a crappy BIOS, but the manufacturer rightly pointed out that it is not
> in violation of anything.

I haven't encounted this myself, but yes, it's valid but annoying.
 
> > Today, port naming is completely nondeterministic.  If you have but
> > one NIC, there are few chances to get the name wrong (it'll be eth0).
> > If you have >1 NIC, chances increase to get it wrong.
> 
> That is why all distros name network devices based on the only
> deterministic thing they have today, the MAC address.  I still fail to
> see why you do not like this solution, it is honestly the only way to
> properly name network devices in a sane manner.
>
> All distros also provide a way to easily rename the network devices, to
> place a specific name on a specific MAC address, so again, this should
> all be solved already.

It's not the only way, it introduces state where there's a desire for
a stateless solution, it's useless for getting all the names right at
initial OS install time, and it restricts us to a single "name" for a
given device.

We can get additional information from BIOS.  SMBIOS 2.6 (types 9 and
41) has the fields to let us get a "label" for an device at a given
b/d/f.  On my PowerEdge R610, I see "Embedded NIC 1" .. "Embedded NIC
4" for the 4 LOMs.  These labels have a clear correlation to the
labels on the back of the chassis at these ports.  biosdevname can
parse and report this.  HP made a similar vendor-specific extension to
SMBIOS for their platforms, which biosdevname also parses.  Even if
BIOS decides they need to renumber the busses on every boot, it can
keep this table correct.  (insert general mistrust of BIOS authors
rant; that's not the point here.)

biosdevname can be used in udev rules to create multiple names for a
given device.  Rules such as:

 PROGRAM="/sbin/biosdevname --policy=all_names -i %k", SYMLINK+="net/by-slot-name/%c", OPTIONS+="string_escape=replace"
 PROGRAM="/sbin/biosdevname --policy=smbios_names -i %k", SYMLINK+="net/by-chassis-label/%c", OPTIONS+="string_escape=replace"

SMBIOS has its own problems, specifically that it's not hot-plug
aware (it's a static table created during POST).  And if a better way
is found (perhaps through the PCI SIG or ACPI), great, biosdevname can
be extended to use it.  But, without at least a change in udev or the
kernel, it doesn't do any good.
 
> No matter how badly your BIOS teams mess up the PCI enumeration
> order :)

In my case, the BIOS for a given system always configures the ports
the same way, and assigns b/d/f the same way.  With no change in the
BIOS or hardware, I still see the ports enumerated differently on each
boot. :-(



-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Sat, Oct 10, 2009 at 07:47:32AM -0500, Matt Domsch wrote:
> On Fri, Oct 09, 2009 at 10:23:08PM -0700, Greg KH wrote:
> > On Fri, Oct 09, 2009 at 11:40:57PM -0500, Matt Domsch wrote:
> > > The fundamental roadblock to this is that enumeration != naming,
> > > except that it is for network devices, and we keep changing the
> > > enumeration order.
> > 
> > No, the hardware changes the enumeration order, it places _no_
> > guarantees on what order stuff will be found in.  So this is not the
> > kernel changing, just to be clear.
> 
> Over time the kernel has changed its enumeration mechanisms, and
> introduced parallelism into the process (which is a good thing),
> which, from a user perspective, makes names nondeterministic.  Yes,
> fixing this up by hard-coding MAC addresses after install has been
> the traditional mechanism to address this.  I think there's a better
> way.

Ok, but that way can be done in userspace, without the need for this
char device, right?

> > > Today, port naming is completely nondeterministic.  If you have but
> > > one NIC, there are few chances to get the name wrong (it'll be eth0).
> > > If you have >1 NIC, chances increase to get it wrong.
> > 
> > That is why all distros name network devices based on the only
> > deterministic thing they have today, the MAC address.  I still fail to
> > see why you do not like this solution, it is honestly the only way to
> > properly name network devices in a sane manner.
> >
> > All distros also provide a way to easily rename the network devices, to
> > place a specific name on a specific MAC address, so again, this should
> > all be solved already.
> 
> It's not the only way, it introduces state where there's a desire for
> a stateless solution, it's useless for getting all the names right at
> initial OS install time, and it restricts us to a single "name" for a
> given device.
> 
> We can get additional information from BIOS.  SMBIOS 2.6 (types 9 and
> 41) has the fields to let us get a "label" for an device at a given
> b/d/f.  On my PowerEdge R610, I see "Embedded NIC 1" .. "Embedded NIC
> 4" for the 4 LOMs.  These labels have a clear correlation to the
> labels on the back of the chassis at these ports.  biosdevname can
> parse and report this.  HP made a similar vendor-specific extension to
> SMBIOS for their platforms, which biosdevname also parses.  Even if
> BIOS decides they need to renumber the busses on every boot, it can
> keep this table correct.  (insert general mistrust of BIOS authors
> rant; that's not the point here.)
> 
> biosdevname can be used in udev rules to create multiple names for a
> given device.  Rules such as:

Yes, if you want multiple ways to name a network device, then you need
the char nodes.  But without that, you can just pick "always use the
biosdevname" type option from your distro setup screen and go with that.
Then you have everything always working properly from the very
beginning.

> > No matter how badly your BIOS teams mess up the PCI enumeration
> > order :)
> 
> In my case, the BIOS for a given system always configures the ports
> the same way, and assigns b/d/f the same way.  With no change in the
> BIOS or hardware, I still see the ports enumerated differently on each
> boot. :-(

Again, that's legal from a PCI standpoint :)

So you really want this for multiple ways to name the same network
device.  That's a choice the network developers are going to have to
make, as to if that is going to be a legal thing to have happen or not.

But this code is not a requirement to "solve" the fact that network
devices can show up in different order, that problem can be solved as
long as the user picks a single way to name the devices, using tools
that are already present today in distros.

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Sat, Oct 10, 2009 at 07:47:32AM -0500, Matt Domsch wrote:
> On Fri, Oct 09, 2009 at 10:23:08PM -0700, Greg KH wrote:
> > On Fri, Oct 09, 2009 at 11:40:57PM -0500, Matt Domsch wrote:
> > > The fundamental roadblock to this is that enumeration != naming,
> > > except that it is for network devices, and we keep changing the
> > > enumeration order.
> > 
> > No, the hardware changes the enumeration order, it places _no_
> > guarantees on what order stuff will be found in.  So this is not the
> > kernel changing, just to be clear.
> 
> Over time the kernel has changed its enumeration mechanisms, and
> introduced parallelism into the process (which is a good thing),
> which, from a user perspective, makes names nondeterministic.  Yes,
> fixing this up by hard-coding MAC addresses after install has been
> the traditional mechanism to address this.  I think there's a better
> way.

Ok, but that way can be done in userspace, without the need for this
char device, right?

> > > Today, port naming is completely nondeterministic.  If you have but
> > > one NIC, there are few chances to get the name wrong (it'll be eth0).
> > > If you have >1 NIC, chances increase to get it wrong.
> > 
> > That is why all distros name network devices based on the only
> > deterministic thing they have today, the MAC address.  I still fail to
> > see why you do not like this solution, it is honestly the only way to
> > properly name network devices in a sane manner.
> >
> > All distros also provide a way to easily rename the network devices, to
> > place a specific name on a specific MAC address, so again, this should
> > all be solved already.
> 
> It's not the only way, it introduces state where there's a desire for
> a stateless solution, it's useless for getting all the names right at
> initial OS install time, and it restricts us to a single "name" for a
> given device.
> 
> We can get additional information from BIOS.  SMBIOS 2.6 (types 9 and
> 41) has the fields to let us get a "label" for an device at a given
> b/d/f.  On my PowerEdge R610, I see "Embedded NIC 1" .. "Embedded NIC
> 4" for the 4 LOMs.  These labels have a clear correlation to the
> labels on the back of the chassis at these ports.  biosdevname can
> parse and report this.  HP made a similar vendor-specific extension to
> SMBIOS for their platforms, which biosdevname also parses.  Even if
> BIOS decides they need to renumber the busses on every boot, it can
> keep this table correct.  (insert general mistrust of BIOS authors
> rant; that's not the point here.)
> 
> biosdevname can be used in udev rules to create multiple names for a
> given device.  Rules such as:

Yes, if you want multiple ways to name a network device, then you need
the char nodes.  But without that, you can just pick "always use the
biosdevname" type option from your distro setup screen and go with that.
Then you have everything always working properly from the very
beginning.

> > No matter how badly your BIOS teams mess up the PCI enumeration
> > order :)
> 
> In my case, the BIOS for a given system always configures the ports
> the same way, and assigns b/d/f the same way.  With no change in the
> BIOS or hardware, I still see the ports enumerated differently on each
> boot. :-(

Again, that's legal from a PCI standpoint :)

So you really want this for multiple ways to name the same network
device.  That's a choice the network developers are going to have to
make, as to if that is going to be a legal thing to have happen or not.

But this code is not a requirement to "solve" the fact that network
devices can show up in different order, that problem can be solved as
long as the user picks a single way to name the devices, using tools
that are already present today in distros.

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Sat, Oct 10, 2009 at 01:47:39PM +0530, Sujit K M wrote:
> Greg,
> 
> 
> > No, the hardware changes the enumeration order, it places _no_
> > guarantees on what order stuff will be found in. ?So this is not the
> > kernel changing, just to be clear.
> > Again, I have a machine here that likes to reorder PCI devices every 4th
> > or so boot times, and that's fine according to the PCI spec. ?Yeah, it's
> > a crappy BIOS, but the manufacturer rightly pointed out that it is not
> > in violation of anything.
> >
> 
> I think the open call should be implemented then. By the patch very little
> knowledge is being shared on type of network implementation it is trying to
> do.

What would open() accomplish?  What good would the file descriptor be?
What could you use it for?

> Also it is messing with core datastructure and procedures. This seems
> to be simplified by changing implementing the other operations like poll().

I don't understand.

> > That is why all distros name network devices based on the only
> > deterministic thing they have today, the MAC address. ?I still fail to
> > see why you do not like this solution, it is honestly the only way to
> > properly name network devices in a sane manner.
> 
> This is feature that needs to be implemented. As per the rules followed.

This feature is already implemented today, all distros have it.

> > All distros also provide a way to easily rename the network devices, to
> > place a specific name on a specific MAC address, so again, this should
> > all be solved already.
> >
> > No matter how badly your BIOS teams mess up the PCI enumeration order :)
> 
> This is an problem, But I think this can be solved by implementing some of the
> routines in the network device.

I don't, see the rules that your distro ships today for persistant
network devices, it's already there, no need to change the kernel at
all.

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Sat, Oct 10, 2009 at 01:47:39PM +0530, Sujit K M wrote:
> Greg,
> 
> 
> > No, the hardware changes the enumeration order, it places _no_
> > guarantees on what order stuff will be found in. ?So this is not the
> > kernel changing, just to be clear.
> > Again, I have a machine here that likes to reorder PCI devices every 4th
> > or so boot times, and that's fine according to the PCI spec. ?Yeah, it's
> > a crappy BIOS, but the manufacturer rightly pointed out that it is not
> > in violation of anything.
> >
> 
> I think the open call should be implemented then. By the patch very little
> knowledge is being shared on type of network implementation it is trying to
> do.

What would open() accomplish?  What good would the file descriptor be?
What could you use it for?

> Also it is messing with core datastructure and procedures. This seems
> to be simplified by changing implementing the other operations like poll().

I don't understand.

> > That is why all distros name network devices based on the only
> > deterministic thing they have today, the MAC address. ?I still fail to
> > see why you do not like this solution, it is honestly the only way to
> > properly name network devices in a sane manner.
> 
> This is feature that needs to be implemented. As per the rules followed.

This feature is already implemented today, all distros have it.

> > All distros also provide a way to easily rename the network devices, to
> > place a specific name on a specific MAC address, so again, this should
> > all be solved already.
> >
> > No matter how badly your BIOS teams mess up the PCI enumeration order :)
> 
> This is an problem, But I think this can be solved by implementing some of the
> routines in the network device.

I don't, see the rules that your distro ships today for persistant
network devices, it's already there, no need to change the kernel at
all.

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Bryan Kadzban]

[-- Attachment #1: Type: text/plain, Size: 3218 bytes --]

Greg KH wrote:
> On Sat, Oct 10, 2009 at 07:47:32AM -0500, Matt Domsch wrote:
>> On Fri, Oct 09, 2009 at 10:23:08PM -0700, Greg KH wrote:
>>> On Fri, Oct 09, 2009 at 11:40:57PM -0500, Matt Domsch wrote:
>>>> The fundamental roadblock to this is that enumeration !=
>>>> naming, except that it is for network devices, and we keep
>>>> changing the enumeration order.
>>> No, the hardware changes the enumeration order, it places _no_ 
>>> guarantees on what order stuff will be found in.  So this is not
>>> the kernel changing, just to be clear.
>> Over time the kernel has changed its enumeration mechanisms, and 
>> introduced parallelism into the process (which is a good thing), 
>> which, from a user perspective, makes names nondeterministic.  Yes,
>> fixing this up by hard-coding MAC addresses after install has been
>> the traditional mechanism to address this.  I think there's a
>> better way.
> 
> Ok, but that way can be done in userspace, without the need for this 
> char device, right?

For the record -- when I tried to send a patch that did exactly this
(provided an option to use by-path persistence for network drivers), it
was rejected because "that doesn't work for USB".

True, it doesn't.  But by-mac (what we have today) doesn't work for
replacing motherboards in a random home system (that can't override the
MAC address in the BIOS), either.

So why not provide both alternatives?

As you say below, it's up to the network devs whether this should be
allowed...

>> biosdevname can be used in udev rules to create multiple names for
>> a given device.  Rules such as:
> 
> Yes, if you want multiple ways to name a network device, then you
> need the char nodes.  But without that, you can just pick "always use
> the biosdevname" type option from your distro setup screen and go
> with that. Then you have everything always working properly from the
> very beginning.

*If* biosdevname works on your system.  It doesn't on mine: this SMBIOS
extension doesn't exist.  :-)

> So you really want this for multiple ways to name the same network 
> device.  That's a choice the network developers are going to have to 
> make, as to if that is going to be a legal thing to have happen or
> not.

Yes.  So do I, actually (for what little that's worth)...

> But this code is not a requirement to "solve" the fact that network 
> devices can show up in different order, that problem can be solved as
> long as the user picks a single way to name the devices, using tools
> that are already present today in distros.

This code is not a requirement, no.  But -- as you say -- it does
provide a halfway-decent way to assign multiple names to a NIC.  And
that provides admins the choice to use a couple different persistence
schemes, depending on how they expect their hardware to work.

(It *may* even be possible to use some kind of layer-2 traffic to see
what else is on the connected network and provide symlinks based on
that.  IPv6 autoconfig type of thing, maybe.  That's probably a *lot*
more complicated, and may be impossible, but would be even closer to
what I think Dell customers are asking for based on Matt's posts.)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 260 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[Bryan Kadzban]

[-- Attachment #1: Type: text/plain, Size: 3218 bytes --]

Greg KH wrote:
> On Sat, Oct 10, 2009 at 07:47:32AM -0500, Matt Domsch wrote:
>> On Fri, Oct 09, 2009 at 10:23:08PM -0700, Greg KH wrote:
>>> On Fri, Oct 09, 2009 at 11:40:57PM -0500, Matt Domsch wrote:
>>>> The fundamental roadblock to this is that enumeration !=
>>>> naming, except that it is for network devices, and we keep
>>>> changing the enumeration order.
>>> No, the hardware changes the enumeration order, it places _no_ 
>>> guarantees on what order stuff will be found in.  So this is not
>>> the kernel changing, just to be clear.
>> Over time the kernel has changed its enumeration mechanisms, and 
>> introduced parallelism into the process (which is a good thing), 
>> which, from a user perspective, makes names nondeterministic.  Yes,
>> fixing this up by hard-coding MAC addresses after install has been
>> the traditional mechanism to address this.  I think there's a
>> better way.
> 
> Ok, but that way can be done in userspace, without the need for this 
> char device, right?

For the record -- when I tried to send a patch that did exactly this
(provided an option to use by-path persistence for network drivers), it
was rejected because "that doesn't work for USB".

True, it doesn't.  But by-mac (what we have today) doesn't work for
replacing motherboards in a random home system (that can't override the
MAC address in the BIOS), either.

So why not provide both alternatives?

As you say below, it's up to the network devs whether this should be
allowed...

>> biosdevname can be used in udev rules to create multiple names for
>> a given device.  Rules such as:
> 
> Yes, if you want multiple ways to name a network device, then you
> need the char nodes.  But without that, you can just pick "always use
> the biosdevname" type option from your distro setup screen and go
> with that. Then you have everything always working properly from the
> very beginning.

*If* biosdevname works on your system.  It doesn't on mine: this SMBIOS
extension doesn't exist.  :-)

> So you really want this for multiple ways to name the same network 
> device.  That's a choice the network developers are going to have to 
> make, as to if that is going to be a legal thing to have happen or
> not.

Yes.  So do I, actually (for what little that's worth)...

> But this code is not a requirement to "solve" the fact that network 
> devices can show up in different order, that problem can be solved as
> long as the user picks a single way to name the devices, using tools
> that are already present today in distros.

This code is not a requirement, no.  But -- as you say -- it does
provide a halfway-decent way to assign multiple names to a NIC.  And
that provides admins the choice to use a couple different persistence
schemes, depending on how they expect their hardware to work.

(It *may* even be possible to use some kind of layer-2 traffic to see
what else is on the connected network and provide symlinks based on
that.  IPv6 autoconfig type of thing, maybe.  That's probably a *lot*
more complicated, and may be impossible, but would be even closer to
what I think Dell customers are asking for based on Matt's posts.)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 260 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[Bill Fink]

On Fri, 9 Oct 2009, Greg KH wrote:

> On Fri, Oct 09, 2009 at 11:40:57PM -0500, Matt Domsch wrote:
> > The fundamental roadblock to this is that enumeration != naming,
> > except that it is for network devices, and we keep changing the
> > enumeration order.
> 
> No, the hardware changes the enumeration order, it places _no_
> guarantees on what order stuff will be found in.  So this is not the
> kernel changing, just to be clear.
> 
> Again, I have a machine here that likes to reorder PCI devices every 4th
> or so boot times, and that's fine according to the PCI spec.  Yeah, it's
> a crappy BIOS, but the manufacturer rightly pointed out that it is not
> in violation of anything.
> 
> > Today, port naming is completely nondeterministic.  If you have but
> > one NIC, there are few chances to get the name wrong (it'll be eth0).
> > If you have >1 NIC, chances increase to get it wrong.
> 
> That is why all distros name network devices based on the only
> deterministic thing they have today, the MAC address.  I still fail to
> see why you do not like this solution, it is honestly the only way to
> properly name network devices in a sane manner.
> 
> All distros also provide a way to easily rename the network devices, to
> place a specific name on a specific MAC address, so again, this should
> all be solved already.
> 
> No matter how badly your BIOS teams mess up the PCI enumeration order :)

No comment on the specific implementation decision, but I am in the
process of setting up a large number of test systems with identical
hardware configurations, and using a master disk image to clone all the
test systems.  The biggest pain in this process is identiying the MAC
addresses for each of the six or more network interfaces in each test
system (we want eth0...ethN to always reference the same physical port
on the test systems), and then having to modify the 70-persistent-net.rules
udev file and the HWADDR entry for all the ifcfg-ethX files to reflect
the correct MAC addresses.  It would be fantastic if there were some
mechanism for making this part of the process unnecessary.

						-Bill

Re: PATCH: Network Device Naming mechanism and policy

[Bill Fink]

On Fri, 9 Oct 2009, Greg KH wrote:

> On Fri, Oct 09, 2009 at 11:40:57PM -0500, Matt Domsch wrote:
> > The fundamental roadblock to this is that enumeration != naming,
> > except that it is for network devices, and we keep changing the
> > enumeration order.
> 
> No, the hardware changes the enumeration order, it places _no_
> guarantees on what order stuff will be found in.  So this is not the
> kernel changing, just to be clear.
> 
> Again, I have a machine here that likes to reorder PCI devices every 4th
> or so boot times, and that's fine according to the PCI spec.  Yeah, it's
> a crappy BIOS, but the manufacturer rightly pointed out that it is not
> in violation of anything.
> 
> > Today, port naming is completely nondeterministic.  If you have but
> > one NIC, there are few chances to get the name wrong (it'll be eth0).
> > If you have >1 NIC, chances increase to get it wrong.
> 
> That is why all distros name network devices based on the only
> deterministic thing they have today, the MAC address.  I still fail to
> see why you do not like this solution, it is honestly the only way to
> properly name network devices in a sane manner.
> 
> All distros also provide a way to easily rename the network devices, to
> place a specific name on a specific MAC address, so again, this should
> all be solved already.
> 
> No matter how badly your BIOS teams mess up the PCI enumeration order :)

No comment on the specific implementation decision, but I am in the
process of setting up a large number of test systems with identical
hardware configurations, and using a master disk image to clone all the
test systems.  The biggest pain in this process is identiying the MAC
addresses for each of the six or more network interfaces in each test
system (we want eth0...ethN to always reference the same physical port
on the test systems), and then having to modify the 70-persistent-net.rules
udev file and the HWADDR entry for all the ifcfg-ethX files to reflect
the correct MAC addresses.  It would be fantastic if there were some
mechanism for making this part of the process unnecessary.

						-Bill

Re: PATCH: Network Device Naming mechanism and policy

[Stephen Hemminger]

On Fri, 9 Oct 2009 23:40:57 -0500
Matt Domsch <Matt_Domsch@dell.com> wrote:

> On Fri, Oct 09, 2009 at 07:44:01PM -0700, Stephen Hemminger wrote:
> > Maybe I'm dense but can't see why having a useless /dev/net/ symlinks
> > is a good interface choice. Perhaps you should explain the race between
> > PCI scan and udev in more detail, and why solving it in either of those
> > places won't work. As it stands you are proposing yet another wart to
> > the already complex set of network interface API's which has implications
> > for security as well as increasing the number of possible bugs.
> 
> The fundamental challenge is that system administrators, particularly
> those of server-class hardware with multiple network ports present
> (some on the motherboard, some on add-in cards), have the
> not-so-unreasonable expectation that there is a deterministic mapping
> between those ports and the name one uses to address those ports.
> 
> The fundamental roadblock to this is that enumeration != naming,
> except that it is for network devices, and we keep changing the
> enumeration order.
> 
> Today, port naming is completely nondeterministic.  If you have but
> one NIC, there are few chances to get the name wrong (it'll be eth0).
> If you have >1 NIC, chances increase to get it wrong.
> 
> The complexity arises at multiple levels.
> 
> First, device driver load order.  In the 2.4 kernel days, and even
> mostly early 2.6 kernel days, the order in which network drivers
> loaded played a role in determining the name of the device.  Drivers
> loaded first would get their devices named first.  If I have two types
> of devices, say an e100-driven NIC and a tg3-driven NIC, I could
> figure out that the names would be eth0=e100 and eth1=tg3 by setting
> the load order in /etc/modules.conf (now modprobe.conf).  If I wanted
> the other order, fine, just switch it around in modules.conf and
> reboot.  OS installers, being the first running instance of Linux,
> before modprobe.conf existed to set that ordering, had to have other
> mechanisms to load drivers (often manually, or if programmatically
> such as in a kickstart or autoyast file, was still somewhat fixed).
> 
> With the advent of modaliases + udev, now modprobe.conf doesn't
> contain this ordering anymore, and udev loads the drivers.  So while
> it wasn't perfect, it was better than nothing, and that's gone now.
> 
> It gets even worse as, to speed up boot time, modprobes can be run in
> parallel, and even within individual drivers, the NICs get initialized
> (and named) in parallel.  Further confusing things, some devices need
> firmware loaded into them before getting names assigned, which is done
> from userspace, and they race.
> 
> Second, PCI device list order.  In the 2.4 kernel days, the PCI device
> list was scanned "breadth-first" (for each bus; for each device; for
> each function; do load...).  FWIW, Windows still does this.  It gives
> BIOS, which assigns PCI bus numbers, a chance to put LOMs at a lower
> bus number than add-in cards.  Module load order still mattered, but
> at least if you had say 2 e1000 ports as LOMs, and 2 e1000 ports on
> add-in cards, you pretty much knew the ordering would be eth0 as
> lowest bdf on the motherboard, eth1 as next bdf on the motherboard,
> and eth2 and 3 as the add-in cards in ascending slot order.
> 
> With the advent of PCI hot plug in the 2.5 kernel series, the
> breadth-first ordering became depth-first.    (for each bus; for each
> device; if the device is a bridge, scan the busses behind it.).  This
> caused NICs on bus 0 device 5, and bus 1 device 3, (eth0 and 1
> respectively) to be enumerated differently due to the  a bridge from
> bus 0 to bus 1 at 0:4.  My crude hack of pci=bfsort, with some dmi
> strings to match and auto-enable, at least reverted this back to the
> ordering the 2.4 kernel and Windows used.  Now we have to keep adding
> systems to this DMI list (Dell has a number of systems on this list
> today; HP has even more).  And it doesn't completely solve the
> problem, just masks it.
> 
> So, to address the ordering problem, I placed a constraint on our
> server hardware teams, forcing them to lay out their boards and assign
> PCIe lanes and bus numbers, such that at least the designed "first"
> LOM would get found first in either depth-first or breadth-first
> order.  Our 10G and 11G servers have this restriction in place, though
> it wasn't easy.  And it's gotten even harder, as the PCIe switches
> expand the number of lanes available.  We no longer have the
> traditional tiered buses architecture, but the PCI layer for this
> purpose thinks we do.  I need to remove this constraint on the
> hardware teams - it's gotten to be impossible for the chipset lanes to
> be laid out efficiently with this constraint.
> 
> All of the above just papered over the enumeration != naming problem.
> 
> Third, stateless computing is becoming more and more commonplace.  The
> Field Replaceable Unit is the server itself.  Got a bad server?  Pull
> it out, move the disks to an identical unit, insert the new server,
> and go.  Fix the bad server offline and bring it back.  In this model,
> having MAC addresses as the mechanism that is providing the
> determinism (/etc/mactab or udev persistent naming rules) breaks,
> because the MAC addresses of the ports on the new server won't be the
> same as on the old server.  HP even has a technology to solve _this_
> problem (in their blade chassis) - Virtual Connect.  The MACs get
> assigned by the chassis to the blades at POST, and are fixed to the
> slot.  Slick, and Dell has an even more flexible similar feature
> FlexAddress.  This doesn't solve the OS installer problem of "which of
> these NICs should I use to do an install?" but it does recognize the
> problem space and tries to overcome it.
> 
> Fourth, for OS installers, choosing which NIC to use at installtime,
> when all the NICs are plugged in, can be difficult.  PXE environments,
> using pxelinux and its IPAPPEND 2 option, will append
> "BOOTIF=xx:xx:xx:xx:xx:xx" to the kernel command line, that
> containing the MAC address of the NIC used for PXE.  Neat trick.  Yes,
> we then had to teach the OS installers to recognize and use this.  But
> it only works if you PXE boot, and only for that one NIC.
> 
> Fifth, network devices can have only a single name.  eth0.  If we look
> at disks, we see udev manages a tree of symlinks for
> /dev/disk/by-label, /dev/disk/by-path, /dev/disk/by-uuid. And as a
> system admin, if I wanted to also create a udev rule for
> /dev/disk/by-function (boot, swap, mattsstorage), it's trivial to do
> so.  Why can't we have this flexibility for network devices too?
> 
> So, how do we get deterministic naming for all the NICs in a system?
> That's what I'm going for.  Picture a network switch, with several
> blades, and several ports on each blade.  The network admin addresses
> each port as say 1/16 (the 16th port on blade 1, clearly labeled).
> The parallel on servers is the chassis label printed on the outside
> (say, "Gb1").  But due the above, there is no guarantee, and in fact
> little chance, that Gb1 will be consistently named eth0 - it may vary
> from boot to boot.  That's full of fail.
> 
> For a concrete example, the 4 bnx2 chips in my PowerEdge R610 with a
> current 2.6 kernel, loading only one driver, the ports get assigned
> names in nondeterministic order on each boot.  Given that the
> ifcfg-eth* rules, netfilter rules, and the rest all expect
> deterministic naming, massive failure ensues unless some form of
> determinism is brought back in.
> 
> The idea to use a character device node to expose the ifindex value,
> and udev to manage a tree of symlinks to it, really follows the model
> used today for disks.  It allows us to get deterministic names for
> devices (albeit, the names are symlinks), and multiple names for
> devices (through multiple symlink rules).  That some people want to
> use the char device to call ioctl() and read/write, as is possible on
> the BSDs, would just be gravy IMHO.
> 
> It does require a change in behavior for a system administrator.
> Instead of hard-coding 'eth0' into her scripts, she uses
> '/dev/net/by-function/boot' or somesuch.  But then that name is
> guaranteed to always refer to the "right" NIC.  Every admin I've
> spoken to is willing to make this kind of change, as long as they get
> the consistent, deterministic naming they expect but don't have
> today.  And it does require patching userspace apps to take both a
> kernel device name, or a path, and to resolve the path to device name
> or ifindex.  We wrote libnetdevname (really, one function), and have
> patches for several userspace apps to use it, to prove it can be done.
> 
> One alternative would be to do something using the sysfs ifindex value
> already exported.  e.g.
>   /sys/devices/pci0000:00/0000:00:05.0/0000:05:00.0/0000:06:07.0/net/eth0/ifindex
> 
> but we have never had symlinks from /dev into /sys before (doesn't
> mean we couldn't though).  In that case, udev would grow to manage
> /dev/net/by-chassis-label/Embedded_NIC_1 -> /sys/devices/.../net/eth0,
> and libnetdevname would be used to follow the symlink in applications.
> This approach could solve my problem without (many or any?) kernel
> changes needed, but wouldn't help those who want to do
> ioctl/read/write to a devnode.
> 
> Given the problem, I really do need a solution.  I've proposed one
> method, and an alternative, but I can't afford to let the problem stay
> unaddressed any longer, and need a clear direction to be chosen.  The
> char device gives me what I need, and others what they want also.
> 
> Thanks for listening to the diatribe.  For more examples and
> workarounds that we've been telling our customers for several years,
> check out http://linux.dell.com/papers.shtml for the Network Interface
> Card Naming whitepaper.
> 
> 

Why isn't the available through sysfs enough, if not why not
add the necessary attributes there.

BTW, for our distro, we are looking into device renaming based on PCI slot
because that is what router OS's do. Customers expect if they replace the card
in slot 0, it will come back with the same name.  This is not what server
customers expect.

Re: PATCH: Network Device Naming mechanism and policy

[Stephen Hemminger]

On Fri, 9 Oct 2009 23:40:57 -0500
Matt Domsch <Matt_Domsch@dell.com> wrote:

> On Fri, Oct 09, 2009 at 07:44:01PM -0700, Stephen Hemminger wrote:
> > Maybe I'm dense but can't see why having a useless /dev/net/ symlinks
> > is a good interface choice. Perhaps you should explain the race between
> > PCI scan and udev in more detail, and why solving it in either of those
> > places won't work. As it stands you are proposing yet another wart to
> > the already complex set of network interface API's which has implications
> > for security as well as increasing the number of possible bugs.
> 
> The fundamental challenge is that system administrators, particularly
> those of server-class hardware with multiple network ports present
> (some on the motherboard, some on add-in cards), have the
> not-so-unreasonable expectation that there is a deterministic mapping
> between those ports and the name one uses to address those ports.
> 
> The fundamental roadblock to this is that enumeration != naming,
> except that it is for network devices, and we keep changing the
> enumeration order.
> 
> Today, port naming is completely nondeterministic.  If you have but
> one NIC, there are few chances to get the name wrong (it'll be eth0).
> If you have >1 NIC, chances increase to get it wrong.
> 
> The complexity arises at multiple levels.
> 
> First, device driver load order.  In the 2.4 kernel days, and even
> mostly early 2.6 kernel days, the order in which network drivers
> loaded played a role in determining the name of the device.  Drivers
> loaded first would get their devices named first.  If I have two types
> of devices, say an e100-driven NIC and a tg3-driven NIC, I could
> figure out that the names would be eth0á00 and eth1=tg3 by setting
> the load order in /etc/modules.conf (now modprobe.conf).  If I wanted
> the other order, fine, just switch it around in modules.conf and
> reboot.  OS installers, being the first running instance of Linux,
> before modprobe.conf existed to set that ordering, had to have other
> mechanisms to load drivers (often manually, or if programmatically
> such as in a kickstart or autoyast file, was still somewhat fixed).
> 
> With the advent of modaliases + udev, now modprobe.conf doesn't
> contain this ordering anymore, and udev loads the drivers.  So while
> it wasn't perfect, it was better than nothing, and that's gone now.
> 
> It gets even worse as, to speed up boot time, modprobes can be run in
> parallel, and even within individual drivers, the NICs get initialized
> (and named) in parallel.  Further confusing things, some devices need
> firmware loaded into them before getting names assigned, which is done
> from userspace, and they race.
> 
> Second, PCI device list order.  In the 2.4 kernel days, the PCI device
> list was scanned "breadth-first" (for each bus; for each device; for
> each function; do load...).  FWIW, Windows still does this.  It gives
> BIOS, which assigns PCI bus numbers, a chance to put LOMs at a lower
> bus number than add-in cards.  Module load order still mattered, but
> at least if you had say 2 e1000 ports as LOMs, and 2 e1000 ports on
> add-in cards, you pretty much knew the ordering would be eth0 as
> lowest bdf on the motherboard, eth1 as next bdf on the motherboard,
> and eth2 and 3 as the add-in cards in ascending slot order.
> 
> With the advent of PCI hot plug in the 2.5 kernel series, the
> breadth-first ordering became depth-first.    (for each bus; for each
> device; if the device is a bridge, scan the busses behind it.).  This
> caused NICs on bus 0 device 5, and bus 1 device 3, (eth0 and 1
> respectively) to be enumerated differently due to the  a bridge from
> bus 0 to bus 1 at 0:4.  My crude hack of pci¿sort, with some dmi
> strings to match and auto-enable, at least reverted this back to the
> ordering the 2.4 kernel and Windows used.  Now we have to keep adding
> systems to this DMI list (Dell has a number of systems on this list
> today; HP has even more).  And it doesn't completely solve the
> problem, just masks it.
> 
> So, to address the ordering problem, I placed a constraint on our
> server hardware teams, forcing them to lay out their boards and assign
> PCIe lanes and bus numbers, such that at least the designed "first"
> LOM would get found first in either depth-first or breadth-first
> order.  Our 10G and 11G servers have this restriction in place, though
> it wasn't easy.  And it's gotten even harder, as the PCIe switches
> expand the number of lanes available.  We no longer have the
> traditional tiered buses architecture, but the PCI layer for this
> purpose thinks we do.  I need to remove this constraint on the
> hardware teams - it's gotten to be impossible for the chipset lanes to
> be laid out efficiently with this constraint.
> 
> All of the above just papered over the enumeration != naming problem.
> 
> Third, stateless computing is becoming more and more commonplace.  The
> Field Replaceable Unit is the server itself.  Got a bad server?  Pull
> it out, move the disks to an identical unit, insert the new server,
> and go.  Fix the bad server offline and bring it back.  In this model,
> having MAC addresses as the mechanism that is providing the
> determinism (/etc/mactab or udev persistent naming rules) breaks,
> because the MAC addresses of the ports on the new server won't be the
> same as on the old server.  HP even has a technology to solve _this_
> problem (in their blade chassis) - Virtual Connect.  The MACs get
> assigned by the chassis to the blades at POST, and are fixed to the
> slot.  Slick, and Dell has an even more flexible similar feature
> FlexAddress.  This doesn't solve the OS installer problem of "which of
> these NICs should I use to do an install?" but it does recognize the
> problem space and tries to overcome it.
> 
> Fourth, for OS installers, choosing which NIC to use at installtime,
> when all the NICs are plugged in, can be difficult.  PXE environments,
> using pxelinux and its IPAPPEND 2 option, will append
> "BOOTIF=xx:xx:xx:xx:xx:xx" to the kernel command line, that
> containing the MAC address of the NIC used for PXE.  Neat trick.  Yes,
> we then had to teach the OS installers to recognize and use this.  But
> it only works if you PXE boot, and only for that one NIC.
> 
> Fifth, network devices can have only a single name.  eth0.  If we look
> at disks, we see udev manages a tree of symlinks for
> /dev/disk/by-label, /dev/disk/by-path, /dev/disk/by-uuid. And as a
> system admin, if I wanted to also create a udev rule for
> /dev/disk/by-function (boot, swap, mattsstorage), it's trivial to do
> so.  Why can't we have this flexibility for network devices too?
> 
> So, how do we get deterministic naming for all the NICs in a system?
> That's what I'm going for.  Picture a network switch, with several
> blades, and several ports on each blade.  The network admin addresses
> each port as say 1/16 (the 16th port on blade 1, clearly labeled).
> The parallel on servers is the chassis label printed on the outside
> (say, "Gb1").  But due the above, there is no guarantee, and in fact
> little chance, that Gb1 will be consistently named eth0 - it may vary
> from boot to boot.  That's full of fail.
> 
> For a concrete example, the 4 bnx2 chips in my PowerEdge R610 with a
> current 2.6 kernel, loading only one driver, the ports get assigned
> names in nondeterministic order on each boot.  Given that the
> ifcfg-eth* rules, netfilter rules, and the rest all expect
> deterministic naming, massive failure ensues unless some form of
> determinism is brought back in.
> 
> The idea to use a character device node to expose the ifindex value,
> and udev to manage a tree of symlinks to it, really follows the model
> used today for disks.  It allows us to get deterministic names for
> devices (albeit, the names are symlinks), and multiple names for
> devices (through multiple symlink rules).  That some people want to
> use the char device to call ioctl() and read/write, as is possible on
> the BSDs, would just be gravy IMHO.
> 
> It does require a change in behavior for a system administrator.
> Instead of hard-coding 'eth0' into her scripts, she uses
> '/dev/net/by-function/boot' or somesuch.  But then that name is
> guaranteed to always refer to the "right" NIC.  Every admin I've
> spoken to is willing to make this kind of change, as long as they get
> the consistent, deterministic naming they expect but don't have
> today.  And it does require patching userspace apps to take both a
> kernel device name, or a path, and to resolve the path to device name
> or ifindex.  We wrote libnetdevname (really, one function), and have
> patches for several userspace apps to use it, to prove it can be done.
> 
> One alternative would be to do something using the sysfs ifindex value
> already exported.  e.g.
>   /sys/devices/pci0000:00/0000:00:05.0/0000:05:00.0/0000:06:07.0/net/eth0/ifindex
> 
> but we have never had symlinks from /dev into /sys before (doesn't
> mean we couldn't though).  In that case, udev would grow to manage
> /dev/net/by-chassis-label/Embedded_NIC_1 -> /sys/devices/.../net/eth0,
> and libnetdevname would be used to follow the symlink in applications.
> This approach could solve my problem without (many or any?) kernel
> changes needed, but wouldn't help those who want to do
> ioctl/read/write to a devnode.
> 
> Given the problem, I really do need a solution.  I've proposed one
> method, and an alternative, but I can't afford to let the problem stay
> unaddressed any longer, and need a clear direction to be chosen.  The
> char device gives me what I need, and others what they want also.
> 
> Thanks for listening to the diatribe.  For more examples and
> workarounds that we've been telling our customers for several years,
> check out http://linux.dell.com/papers.shtml for the Network Interface
> Card Naming whitepaper.
> 
> 

Why isn't the available through sysfs enough, if not why not
add the necessary attributes there.

BTW, for our distro, we are looking into device renaming based on PCI slot
because that is what router OS's do. Customers expect if they replace the card
in slot 0, it will come back with the same name.  This is not what server
customers expect.

Re: PATCH: Network Device Naming mechanism and policy

[Kay Sievers]

On Sat, Oct 10, 2009 at 20:11, Bill Fink <billfink@mindspring.com> wrote:
> No comment on the specific implementation decision, but I am in the
> process of setting up a large number of test systems with identical
> hardware configurations, and using a master disk image to clone all the
> test systems.  The biggest pain in this process is identiying the MAC
> addresses for each of the six or more network interfaces in each test
> system (we want eth0...ethN to always reference the same physical port
> on the test systems), and then having to modify the 70-persistent-net.rules
> udev file and the HWADDR entry for all the ifcfg-ethX files to reflect
> the correct MAC addresses.  It would be fantastic if there were some
> mechanism for making this part of the process unnecessary.

Udev creates the persistent rules only if no other rule set a name.
Adding something like:
  SUBSYSTEM=="net", KERNEL==""eth*", NAME="eth%n"
in any earlier rules file before the udev generated one will skip all
off the automatic udev rule creation.

Kay

Re: PATCH: Network Device Naming mechanism and policy

[Kay Sievers]

On Sat, Oct 10, 2009 at 20:11, Bill Fink <billfink@mindspring.com> wrote:
> No comment on the specific implementation decision, but I am in the
> process of setting up a large number of test systems with identical
> hardware configurations, and using a master disk image to clone all the
> test systems.  The biggest pain in this process is identiying the MAC
> addresses for each of the six or more network interfaces in each test
> system (we want eth0...ethN to always reference the same physical port
> on the test systems), and then having to modify the 70-persistent-net.rules
> udev file and the HWADDR entry for all the ifcfg-ethX files to reflect
> the correct MAC addresses.  It would be fantastic if there were some
> mechanism for making this part of the process unnecessary.

Udev creates the persistent rules only if no other rule set a name.
Adding something like:
  SUBSYSTEM="net", KERNEL=""eth*", NAME="eth%n"
in any earlier rules file before the udev generated one will skip all
off the automatic udev rule creation.

Kay

Re: PATCH: Network Device Naming mechanism and policy

[Ben Hutchings]

On Sat, 2009-10-10 at 09:27 -0700, Greg KH wrote:
> On Sat, Oct 10, 2009 at 01:47:39PM +0530, Sujit K M wrote:
> > Greg,
> > 
> > 
> > > No, the hardware changes the enumeration order, it places _no_
> > > guarantees on what order stuff will be found in. ?So this is not the
> > > kernel changing, just to be clear.
> > > Again, I have a machine here that likes to reorder PCI devices every 4th
> > > or so boot times, and that's fine according to the PCI spec. ?Yeah, it's
> > > a crappy BIOS, but the manufacturer rightly pointed out that it is not
> > > in violation of anything.
> > >
> > 
> > I think the open call should be implemented then. By the patch very little
> > knowledge is being shared on type of network implementation it is trying to
> > do.
> 
> What would open() accomplish?  What good would the file descriptor be?
> What could you use it for?

Currently all net device ioctls are carried out through arbitrary
sockets and identify the device by name (aside from one to look up the
name by ifindex).  Ever since it became possible to rename net devices,
it has been possible for a sequence of ioctls intended for one device to
race with renaming of that device.  Adding open() and ioctl() to the
character device (which seems reasonably easy) would provide a way to
avoid this.

On the other hand, the netlink configuration APIs already use ifindex so
it may be better just to say that the device ioctls are deprecated and
applications should use netlink.

> > Also it is messing with core datastructure and procedures. This seems
> > to be simplified by changing implementing the other operations like poll().
> 
> I don't understand.
> 
> > > That is why all distros name network devices based on the only
> > > deterministic thing they have today, the MAC address. ?I still fail to
> > > see why you do not like this solution, it is honestly the only way to
> > > properly name network devices in a sane manner.
> > 
> > This is feature that needs to be implemented. As per the rules followed.
> 
> This feature is already implemented today, all distros have it.

No, see below.

> > > All distros also provide a way to easily rename the network devices, to
> > > place a specific name on a specific MAC address, so again, this should
> > > all be solved already.
> > >
> > > No matter how badly your BIOS teams mess up the PCI enumeration order :)
> > 
> > This is an problem, But I think this can be solved by implementing some of the
> > routines in the network device.
> 
> I don't, see the rules that your distro ships today for persistant
> network devices, it's already there, no need to change the kernel at
> all.

The udev persistent net rules work tolerably well for a single system
with a stable set of net devices.

They do not solve the problem Matt's talking about, which is lack of
consistency between multiple systems, because the initial enumeration
order is not predictable.

They also result in name changes when a NIC (or motherboard) is swapped.
For some users, that's fine; for others, it's not.

The ability to specify NICs by port name or PCI address should solve
these problems.

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: PATCH: Network Device Naming mechanism and policy

[Ben Hutchings]

On Sat, 2009-10-10 at 09:27 -0700, Greg KH wrote:
> On Sat, Oct 10, 2009 at 01:47:39PM +0530, Sujit K M wrote:
> > Greg,
> > 
> > 
> > > No, the hardware changes the enumeration order, it places _no_
> > > guarantees on what order stuff will be found in. ?So this is not the
> > > kernel changing, just to be clear.
> > > Again, I have a machine here that likes to reorder PCI devices every 4th
> > > or so boot times, and that's fine according to the PCI spec. ?Yeah, it's
> > > a crappy BIOS, but the manufacturer rightly pointed out that it is not
> > > in violation of anything.
> > >
> > 
> > I think the open call should be implemented then. By the patch very little
> > knowledge is being shared on type of network implementation it is trying to
> > do.
> 
> What would open() accomplish?  What good would the file descriptor be?
> What could you use it for?

Currently all net device ioctls are carried out through arbitrary
sockets and identify the device by name (aside from one to look up the
name by ifindex).  Ever since it became possible to rename net devices,
it has been possible for a sequence of ioctls intended for one device to
race with renaming of that device.  Adding open() and ioctl() to the
character device (which seems reasonably easy) would provide a way to
avoid this.

On the other hand, the netlink configuration APIs already use ifindex so
it may be better just to say that the device ioctls are deprecated and
applications should use netlink.

> > Also it is messing with core datastructure and procedures. This seems
> > to be simplified by changing implementing the other operations like poll().
> 
> I don't understand.
> 
> > > That is why all distros name network devices based on the only
> > > deterministic thing they have today, the MAC address. ?I still fail to
> > > see why you do not like this solution, it is honestly the only way to
> > > properly name network devices in a sane manner.
> > 
> > This is feature that needs to be implemented. As per the rules followed.
> 
> This feature is already implemented today, all distros have it.

No, see below.

> > > All distros also provide a way to easily rename the network devices, to
> > > place a specific name on a specific MAC address, so again, this should
> > > all be solved already.
> > >
> > > No matter how badly your BIOS teams mess up the PCI enumeration order :)
> > 
> > This is an problem, But I think this can be solved by implementing some of the
> > routines in the network device.
> 
> I don't, see the rules that your distro ships today for persistant
> network devices, it's already there, no need to change the kernel at
> all.

The udev persistent net rules work tolerably well for a single system
with a stable set of net devices.

They do not solve the problem Matt's talking about, which is lack of
consistency between multiple systems, because the initial enumeration
order is not predictable.

They also result in name changes when a NIC (or motherboard) is swapped.
For some users, that's fine; for others, it's not.

The ability to specify NICs by port name or PCI address should solve
these problems.

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Sat, Oct 10, 2009 at 11:32:19AM -0700, Stephen Hemminger wrote:
> 
> BTW, for our distro, we are looking into device renaming based on PCI slot
> because that is what router OS's do. Customers expect if they replace the card
> in slot 0, it will come back with the same name.  This is not what server
> customers expect.

If your bios exposes the PCI slots to userspace (through the proper ACPI
namespace), doing this type of naming should be trivial with some simple
udev rules, no additional kernel infrastructure is needed.

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Sat, Oct 10, 2009 at 11:32:19AM -0700, Stephen Hemminger wrote:
> 
> BTW, for our distro, we are looking into device renaming based on PCI slot
> because that is what router OS's do. Customers expect if they replace the card
> in slot 0, it will come back with the same name.  This is not what server
> customers expect.

If your bios exposes the PCI slots to userspace (through the proper ACPI
namespace), doing this type of naming should be trivial with some simple
udev rules, no additional kernel infrastructure is needed.

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Sat, Oct 10, 2009 at 08:00:30PM +0100, Ben Hutchings wrote:
> On the other hand, the netlink configuration APIs already use ifindex so
> it may be better just to say that the device ioctls are deprecated and
> applications should use netlink.

I thought that is what was already encouraged to happen.

> > > > That is why all distros name network devices based on the only
> > > > deterministic thing they have today, the MAC address. ?I still fail to
> > > > see why you do not like this solution, it is honestly the only way to
> > > > properly name network devices in a sane manner.
> > > 
> > > This is feature that needs to be implemented. As per the rules followed.
> > 
> > This feature is already implemented today, all distros have it.
> 
> No, see below.

Yes, if not, file a bug in your distro, all of the infrastructure is
already in place, and the udev rules and scripts are already written.

> > > > All distros also provide a way to easily rename the network devices, to
> > > > place a specific name on a specific MAC address, so again, this should
> > > > all be solved already.
> > > >
> > > > No matter how badly your BIOS teams mess up the PCI enumeration order :)
> > > 
> > > This is an problem, But I think this can be solved by implementing some of the
> > > routines in the network device.
> > 
> > I don't, see the rules that your distro ships today for persistant
> > network devices, it's already there, no need to change the kernel at
> > all.
> 
> The udev persistent net rules work tolerably well for a single system
> with a stable set of net devices.
> 
> They do not solve the problem Matt's talking about, which is lack of
> consistency between multiple systems, because the initial enumeration
> order is not predictable.

Again, you name the device as a MAC address.  Or something else that the
BIOS exports in a unique manner (PCI slot name, etc.).  That is
consistant.  If not, then fix the BIOS.

> They also result in name changes when a NIC (or motherboard) is swapped.
> For some users, that's fine; for others, it's not.
> 
> The ability to specify NICs by port name or PCI address should solve
> these problems.

That can be done today quite easily.  But note that PCI addresses are
not guaranteed to be stable.  As lots of machines are known to have
happen.

Again, none of this requires any kernel changes today at all, let alone
adding dummy char devices for network devices.

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Sat, Oct 10, 2009 at 08:00:30PM +0100, Ben Hutchings wrote:
> On the other hand, the netlink configuration APIs already use ifindex so
> it may be better just to say that the device ioctls are deprecated and
> applications should use netlink.

I thought that is what was already encouraged to happen.

> > > > That is why all distros name network devices based on the only
> > > > deterministic thing they have today, the MAC address. ?I still fail to
> > > > see why you do not like this solution, it is honestly the only way to
> > > > properly name network devices in a sane manner.
> > > 
> > > This is feature that needs to be implemented. As per the rules followed.
> > 
> > This feature is already implemented today, all distros have it.
> 
> No, see below.

Yes, if not, file a bug in your distro, all of the infrastructure is
already in place, and the udev rules and scripts are already written.

> > > > All distros also provide a way to easily rename the network devices, to
> > > > place a specific name on a specific MAC address, so again, this should
> > > > all be solved already.
> > > >
> > > > No matter how badly your BIOS teams mess up the PCI enumeration order :)
> > > 
> > > This is an problem, But I think this can be solved by implementing some of the
> > > routines in the network device.
> > 
> > I don't, see the rules that your distro ships today for persistant
> > network devices, it's already there, no need to change the kernel at
> > all.
> 
> The udev persistent net rules work tolerably well for a single system
> with a stable set of net devices.
> 
> They do not solve the problem Matt's talking about, which is lack of
> consistency between multiple systems, because the initial enumeration
> order is not predictable.

Again, you name the device as a MAC address.  Or something else that the
BIOS exports in a unique manner (PCI slot name, etc.).  That is
consistant.  If not, then fix the BIOS.

> They also result in name changes when a NIC (or motherboard) is swapped.
> For some users, that's fine; for others, it's not.
> 
> The ability to specify NICs by port name or PCI address should solve
> these problems.

That can be done today quite easily.  But note that PCI addresses are
not guaranteed to be stable.  As lots of machines are known to have
happen.

Again, none of this requires any kernel changes today at all, let alone
adding dummy char devices for network devices.

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Sat, Oct 10, 2009 at 10:34:16AM -0700, Bryan Kadzban wrote:
> Greg KH wrote:
> > On Sat, Oct 10, 2009 at 07:47:32AM -0500, Matt Domsch wrote:
> >> On Fri, Oct 09, 2009 at 10:23:08PM -0700, Greg KH wrote:
> >>> On Fri, Oct 09, 2009 at 11:40:57PM -0500, Matt Domsch wrote:
> >>>> The fundamental roadblock to this is that enumeration !=
> >>>> naming, except that it is for network devices, and we keep
> >>>> changing the enumeration order.
> >>> No, the hardware changes the enumeration order, it places _no_ 
> >>> guarantees on what order stuff will be found in.  So this is not
> >>> the kernel changing, just to be clear.
> >> Over time the kernel has changed its enumeration mechanisms, and 
> >> introduced parallelism into the process (which is a good thing), 
> >> which, from a user perspective, makes names nondeterministic.  Yes,
> >> fixing this up by hard-coding MAC addresses after install has been
> >> the traditional mechanism to address this.  I think there's a
> >> better way.
> > 
> > Ok, but that way can be done in userspace, without the need for this 
> > char device, right?
> 
> For the record -- when I tried to send a patch that did exactly this
> (provided an option to use by-path persistence for network drivers), it
> was rejected because "that doesn't work for USB".
> 
> True, it doesn't.  But by-mac (what we have today) doesn't work for
> replacing motherboards in a random home system (that can't override the
> MAC address in the BIOS), either.

If you replace a motherboard, you honestly expect no configuration to be
needed to be changed?  If so, then don't use the MAC naming scheme for
your systems.

> > But this code is not a requirement to "solve" the fact that network 
> > devices can show up in different order, that problem can be solved as
> > long as the user picks a single way to name the devices, using tools
> > that are already present today in distros.
> 
> This code is not a requirement, no.  But -- as you say -- it does
> provide a halfway-decent way to assign multiple names to a NIC.  And
> that provides admins the choice to use a couple different persistence
> schemes, depending on how they expect their hardware to work.

But the names need to then be resolved back to a "real" kernel name in
order to do anything with that network connection, as the char devices
are not real ones.  So that adds an additional layer of complexity on
all of the system configuration tools.

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Sat, Oct 10, 2009 at 10:34:16AM -0700, Bryan Kadzban wrote:
> Greg KH wrote:
> > On Sat, Oct 10, 2009 at 07:47:32AM -0500, Matt Domsch wrote:
> >> On Fri, Oct 09, 2009 at 10:23:08PM -0700, Greg KH wrote:
> >>> On Fri, Oct 09, 2009 at 11:40:57PM -0500, Matt Domsch wrote:
> >>>> The fundamental roadblock to this is that enumeration !> >>>> naming, except that it is for network devices, and we keep
> >>>> changing the enumeration order.
> >>> No, the hardware changes the enumeration order, it places _no_ 
> >>> guarantees on what order stuff will be found in.  So this is not
> >>> the kernel changing, just to be clear.
> >> Over time the kernel has changed its enumeration mechanisms, and 
> >> introduced parallelism into the process (which is a good thing), 
> >> which, from a user perspective, makes names nondeterministic.  Yes,
> >> fixing this up by hard-coding MAC addresses after install has been
> >> the traditional mechanism to address this.  I think there's a
> >> better way.
> > 
> > Ok, but that way can be done in userspace, without the need for this 
> > char device, right?
> 
> For the record -- when I tried to send a patch that did exactly this
> (provided an option to use by-path persistence for network drivers), it
> was rejected because "that doesn't work for USB".
> 
> True, it doesn't.  But by-mac (what we have today) doesn't work for
> replacing motherboards in a random home system (that can't override the
> MAC address in the BIOS), either.

If you replace a motherboard, you honestly expect no configuration to be
needed to be changed?  If so, then don't use the MAC naming scheme for
your systems.

> > But this code is not a requirement to "solve" the fact that network 
> > devices can show up in different order, that problem can be solved as
> > long as the user picks a single way to name the devices, using tools
> > that are already present today in distros.
> 
> This code is not a requirement, no.  But -- as you say -- it does
> provide a halfway-decent way to assign multiple names to a NIC.  And
> that provides admins the choice to use a couple different persistence
> schemes, depending on how they expect their hardware to work.

But the names need to then be resolved back to a "real" kernel name in
order to do anything with that network connection, as the char devices
are not real ones.  So that adds an additional layer of complexity on
all of the system configuration tools.

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Marco d'Itri]

[-- Attachment #1: Type: text/plain, Size: 1879 bytes --]

On Oct 10, Matt Domsch <Matt_Domsch@dell.com> wrote:

> It does require a change in behavior for a system administrator.
> Instead of hard-coding 'eth0' into her scripts, she uses
> '/dev/net/by-function/boot' or somesuch.  But then that name is
> guaranteed to always refer to the "right" NIC.  Every admin I've
> spoken to is willing to make this kind of change, as long as they get
> the consistent, deterministic naming they expect but don't have
> today.  And it does require patching userspace apps to take both a
> kernel device name, or a path, and to resolve the path to device name
> or ifindex.  We wrote libnetdevname (really, one function), and have
> patches for several userspace apps to use it, to prove it can be done.
For the records, before being a distribution developer I am a system
administrator (who designed and manages many firewalls with multiple
network interfaces) and I am still unconvinced that what you are
proposing is a practical solution and that its downsides justify the
significant changes both in software and in system administration
practices that it requires.
The first issue which greatly concerns me is the need to modify *every*
userspace application and kernel tool (what about iptables? What about
the kernel logs?): from an users experience point of view it would be
very annoying if different applications used different names to refer to
the same network device.
I am also concerned with the practical implications of trying to use
such long (and unusual) names: IFNAMSIZ is 16, so user interfaces tend
to assume both short names and that they match something like
/^[a-z0-9]+$/. What about e.g. distribution scripts which use the
interface name as a file system path component? Do you already have a
(standard) scheme to losslessly convert the names to a form without
slashes?

-- 
ciao,
Marco

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[Marco d'Itri]

[-- Attachment #1: Type: text/plain, Size: 1879 bytes --]

On Oct 10, Matt Domsch <Matt_Domsch@dell.com> wrote:

> It does require a change in behavior for a system administrator.
> Instead of hard-coding 'eth0' into her scripts, she uses
> '/dev/net/by-function/boot' or somesuch.  But then that name is
> guaranteed to always refer to the "right" NIC.  Every admin I've
> spoken to is willing to make this kind of change, as long as they get
> the consistent, deterministic naming they expect but don't have
> today.  And it does require patching userspace apps to take both a
> kernel device name, or a path, and to resolve the path to device name
> or ifindex.  We wrote libnetdevname (really, one function), and have
> patches for several userspace apps to use it, to prove it can be done.
For the records, before being a distribution developer I am a system
administrator (who designed and manages many firewalls with multiple
network interfaces) and I am still unconvinced that what you are
proposing is a practical solution and that its downsides justify the
significant changes both in software and in system administration
practices that it requires.
The first issue which greatly concerns me is the need to modify *every*
userspace application and kernel tool (what about iptables? What about
the kernel logs?): from an users experience point of view it would be
very annoying if different applications used different names to refer to
the same network device.
I am also concerned with the practical implications of trying to use
such long (and unusual) names: IFNAMSIZ is 16, so user interfaces tend
to assume both short names and that they match something like
/^[a-z0-9]+$/. What about e.g. distribution scripts which use the
interface name as a file system path component? Do you already have a
(standard) scheme to losslessly convert the names to a form without
slashes?

-- 
ciao,
Marco

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[David Zeuthen]

On Sat, 2009-10-10 at 09:25 -0700, Greg KH wrote:
> Ok, but that way can be done in userspace, without the need for this
> char device, right?

It might actually be nice to have a device file anyway since you can use
existing udev infrastructure to adjust permissions (e.g. chown it to the
netdev group) and add ACLs. This would allow running some software as an
unprivileged user instead of uid 0.

      David

Re: PATCH: Network Device Naming mechanism and policy

[David Zeuthen]

On Sat, 2009-10-10 at 09:25 -0700, Greg KH wrote:
> Ok, but that way can be done in userspace, without the need for this
> char device, right?

It might actually be nice to have a device file anyway since you can use
existing udev infrastructure to adjust permissions (e.g. chown it to the
netdev group) and add ACLs. This would allow running some software as an
unprivileged user instead of uid 0.

      David

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Sun, Oct 11, 2009 at 12:40:18PM -0400, David Zeuthen wrote:
> On Sat, 2009-10-10 at 09:25 -0700, Greg KH wrote:
> > Ok, but that way can be done in userspace, without the need for this
> > char device, right?
> 
> It might actually be nice to have a device file anyway since you can use
> existing udev infrastructure to adjust permissions (e.g. chown it to the
> netdev group) and add ACLs. This would allow running some software as an
> unprivileged user instead of uid 0.

But as the char nodes would not actually control access to anything, how
would this help?  Remember, these device nodes are "dummies" with
nothing behind them (open() fails).

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Sun, Oct 11, 2009 at 12:40:18PM -0400, David Zeuthen wrote:
> On Sat, 2009-10-10 at 09:25 -0700, Greg KH wrote:
> > Ok, but that way can be done in userspace, without the need for this
> > char device, right?
> 
> It might actually be nice to have a device file anyway since you can use
> existing udev infrastructure to adjust permissions (e.g. chown it to the
> netdev group) and add ACLs. This would allow running some software as an
> unprivileged user instead of uid 0.

But as the char nodes would not actually control access to anything, how
would this help?  Remember, these device nodes are "dummies" with
nothing behind them (open() fails).

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Rob Townley]

On Sat, Oct 10, 2009 at 12:23 AM, Greg KH <greg@kroah.com> wrote:
> On Fri, Oct 09, 2009 at 11:40:57PM -0500, Matt Domsch wrote:
>> The fundamental roadblock to this is that enumeration != naming,
>> except that it is for network devices, and we keep changing the
>> enumeration order.
>
> No, the hardware changes the enumeration order, it places _no_
> guarantees on what order stuff will be found in.  So this is not the
> kernel changing, just to be clear.
>
> Again, I have a machine here that likes to reorder PCI devices every 4th
> or so boot times, and that's fine according to the PCI spec.  Yeah, it's
> a crappy BIOS, but the manufacturer rightly pointed out that it is not
> in violation of anything.
>
>> Today, port naming is completely nondeterministic.  If you have but
>> one NIC, there are few chances to get the name wrong (it'll be eth0).
>> If you have >1 NIC, chances increase to get it wrong.
>
> That is why all distros name network devices based on the only
> deterministic thing they have today, the MAC address.  I still fail to
> see why you do not like this solution, it is honestly the only way to
> properly name network devices in a sane manner.
>
> All distros also provide a way to easily rename the network devices, to
> place a specific name on a specific MAC address, so again, this should
> all be solved already.
>
> No matter how badly your BIOS teams mess up the PCI enumeration order :)
>
> thanks,
>
> greg k-h
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

So when an add-in PCI NIC has a lower MAC than the motherboard NICs,
the add-in cards will come before the motherboard NICs.   i don't like it.

But please whatever is done, make sure ping and tracert still works when
telling it to use a ethX source interface:

eth0 = 4.3.2.8, the default gateway is thru eth1.
ping -I eth0 208.67.222.222              FAILS
ping -I 4.3.2.8 208.67.222.222          WORKS
tracert -i eth0 -I 208.67.222.222        FAILS
tracert -s 4.3.2.8 -I 208.67.222.222   WORKS
tracert -i eth0 208.67.222.222           FAILS
tracert -s 4.3.2.8 208.67.222.222      WORKS

Re: PATCH: Network Device Naming mechanism and policy

[Rob Townley]

On Sat, Oct 10, 2009 at 12:23 AM, Greg KH <greg@kroah.com> wrote:
> On Fri, Oct 09, 2009 at 11:40:57PM -0500, Matt Domsch wrote:
>> The fundamental roadblock to this is that enumeration != naming,
>> except that it is for network devices, and we keep changing the
>> enumeration order.
>
> No, the hardware changes the enumeration order, it places _no_
> guarantees on what order stuff will be found in.  So this is not the
> kernel changing, just to be clear.
>
> Again, I have a machine here that likes to reorder PCI devices every 4th
> or so boot times, and that's fine according to the PCI spec.  Yeah, it's
> a crappy BIOS, but the manufacturer rightly pointed out that it is not
> in violation of anything.
>
>> Today, port naming is completely nondeterministic.  If you have but
>> one NIC, there are few chances to get the name wrong (it'll be eth0).
>> If you have >1 NIC, chances increase to get it wrong.
>
> That is why all distros name network devices based on the only
> deterministic thing they have today, the MAC address.  I still fail to
> see why you do not like this solution, it is honestly the only way to
> properly name network devices in a sane manner.
>
> All distros also provide a way to easily rename the network devices, to
> place a specific name on a specific MAC address, so again, this should
> all be solved already.
>
> No matter how badly your BIOS teams mess up the PCI enumeration order :)
>
> thanks,
>
> greg k-h
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

So when an add-in PCI NIC has a lower MAC than the motherboard NICs,
the add-in cards will come before the motherboard NICs.   i don't like it.

But please whatever is done, make sure ping and tracert still works when
telling it to use a ethX source interface:

eth0 = 4.3.2.8, the default gateway is thru eth1.
ping -I eth0 208.67.222.222              FAILS
ping -I 4.3.2.8 208.67.222.222          WORKS
tracert -i eth0 -I 208.67.222.222        FAILS
tracert -s 4.3.2.8 -I 208.67.222.222   WORKS
tracert -i eth0 208.67.222.222           FAILS
tracert -s 4.3.2.8 208.67.222.222      WORKS

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Sun, Oct 11, 2009 at 04:10:03PM -0500, Rob Townley wrote:
> So when an add-in PCI NIC has a lower MAC than the motherboard NICs,
> the add-in cards will come before the motherboard NICs.   i don't like it.

Actually, MAC address has nothing to do with device naming/ordering at
all.  Often systems will have onboard NICs in ascending MAC address
order, but that's not a requirement, and I've seen systems not do
that.  And once you get to add-in vs onboard, BIOS wouldn't be able to
enforce such an ordering anyhow (in general).

But yes, you raise the point that, without using MAC-assigned names or
another naming mechanism designed to cope with this, adding or
removing a card can cause a difference in device enumeration, and thus
name.

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Sun, Oct 11, 2009 at 04:10:03PM -0500, Rob Townley wrote:
> So when an add-in PCI NIC has a lower MAC than the motherboard NICs,
> the add-in cards will come before the motherboard NICs.   i don't like it.

Actually, MAC address has nothing to do with device naming/ordering at
all.  Often systems will have onboard NICs in ascending MAC address
order, but that's not a requirement, and I've seen systems not do
that.  And once you get to add-in vs onboard, BIOS wouldn't be able to
enforce such an ordering anyhow (in general).

But yes, you raise the point that, without using MAC-assigned names or
another naming mechanism designed to cope with this, adding or
removing a card can cause a difference in device enumeration, and thus
name.

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Sun, Oct 11, 2009 at 04:10:03PM -0500, Rob Townley wrote:
> So when an add-in PCI NIC has a lower MAC than the motherboard NICs,
> the add-in cards will come before the motherboard NICs.   i don't like it.

Huh?  Have you used the MAC persistant rules?  If you add a new card,
what does it pick for it?

> But please whatever is done, make sure ping and tracert still works when
> telling it to use a ethX source interface:
> 
> eth0 = 4.3.2.8, the default gateway is thru eth1.
> ping -I eth0 208.67.222.222              FAILS
> ping -I 4.3.2.8 208.67.222.222          WORKS
> tracert -i eth0 -I 208.67.222.222        FAILS
> tracert -s 4.3.2.8 -I 208.67.222.222   WORKS
> tracert -i eth0 208.67.222.222           FAILS
> tracert -s 4.3.2.8 208.67.222.222      WORKS

Again, is what we currently have broken?  I am confused as to what this
is referring to.

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Sun, Oct 11, 2009 at 04:10:03PM -0500, Rob Townley wrote:
> So when an add-in PCI NIC has a lower MAC than the motherboard NICs,
> the add-in cards will come before the motherboard NICs.   i don't like it.

Huh?  Have you used the MAC persistant rules?  If you add a new card,
what does it pick for it?

> But please whatever is done, make sure ping and tracert still works when
> telling it to use a ethX source interface:
> 
> eth0 = 4.3.2.8, the default gateway is thru eth1.
> ping -I eth0 208.67.222.222              FAILS
> ping -I 4.3.2.8 208.67.222.222          WORKS
> tracert -i eth0 -I 208.67.222.222        FAILS
> tracert -s 4.3.2.8 -I 208.67.222.222   WORKS
> tracert -i eth0 208.67.222.222           FAILS
> tracert -s 4.3.2.8 208.67.222.222      WORKS

Again, is what we currently have broken?  I am confused as to what this
is referring to.

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Bryan Kadzban]

[-- Attachment #1: Type: text/plain, Size: 3285 bytes --]

Greg KH wrote:
> On Sat, Oct 10, 2009 at 10:34:16AM -0700, Bryan Kadzban wrote:
>> Greg KH wrote:
>>> On Sat, Oct 10, 2009 at 07:47:32AM -0500, Matt Domsch wrote:
>>>> On Fri, Oct 09, 2009 at 10:23:08PM -0700, Greg KH wrote:
>>>>> On Fri, Oct 09, 2009 at 11:40:57PM -0500, Matt Domsch wrote:
>>>>>> The fundamental roadblock to this is that enumeration != 
>>>>>> naming, except that it is for network devices, and we keep 
>>>>>> changing the enumeration order.
>>>>> No, the hardware changes the enumeration order, it places
>>>>> _no_ guarantees on what order stuff will be found in.  So
>>>>> this is not the kernel changing, just to be clear.
>>>> Over time the kernel has changed its enumeration mechanisms,
>>>> and introduced parallelism into the process (which is a good
>>>> thing), which, from a user perspective, makes names
>>>> nondeterministic.  Yes, fixing this up by hard-coding MAC
>>>> addresses after install has been the traditional mechanism to
>>>> address this.  I think there's a better way.
>>> Ok, but that way can be done in userspace, without the need for
>>> this char device, right?
>> For the record -- when I tried to send a patch that did exactly
>> this (provided an option to use by-path persistence for network
>> drivers), it was rejected because "that doesn't work for USB".
>> 
>> True, it doesn't.  But by-mac (what we have today) doesn't work for
>> replacing motherboards in a random home system (that can't override
>> the MAC address in the BIOS), either.
> 
> If you replace a motherboard, you honestly expect no configuration to
> be needed to be changed?  If so, then don't use the MAC naming scheme
> for your systems.

What else is there?  biosdevname doesn't work with this BIOS.  It looks
like at least path_id has been updated to work with NICs now, so that
might work, with a bit of custom rule hacking.

Or at least, it won't work any more poorly than for disks, which seem to
work pretty well...  :-)

>>> But this code is not a requirement to "solve" the fact that
>>> network devices can show up in different order, that problem can
>>> be solved as long as the user picks a single way to name the
>>> devices, using tools that are already present today in distros.
>> This code is not a requirement, no.  But -- as you say -- it does 
>> provide a halfway-decent way to assign multiple names to a NIC.
>> And that provides admins the choice to use a couple different
>> persistence schemes, depending on how they expect their hardware to
>> work.
> 
> But the names need to then be resolved back to a "real" kernel name
> in order to do anything with that network connection, as the char
> devices are not real ones.  So that adds an additional layer of
> complexity on all of the system configuration tools.

Yes, that is true -- and no, this change isn't perfect.  But it lets me
have multiple "names" per interface, and have "names" that are longer
than IFNAMSIZ, though, which is why I like it.

(Now, if open() would return effectively a netlink socket bound to that
ifindex already, such that the program didn't need to fill in the
various ifindex fields for e.g. rtnetlink... but it's probably really
hard to do that, so this isn't a serious suggestion.)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 260 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[Bryan Kadzban]

[-- Attachment #1: Type: text/plain, Size: 3285 bytes --]

Greg KH wrote:
> On Sat, Oct 10, 2009 at 10:34:16AM -0700, Bryan Kadzban wrote:
>> Greg KH wrote:
>>> On Sat, Oct 10, 2009 at 07:47:32AM -0500, Matt Domsch wrote:
>>>> On Fri, Oct 09, 2009 at 10:23:08PM -0700, Greg KH wrote:
>>>>> On Fri, Oct 09, 2009 at 11:40:57PM -0500, Matt Domsch wrote:
>>>>>> The fundamental roadblock to this is that enumeration != 
>>>>>> naming, except that it is for network devices, and we keep 
>>>>>> changing the enumeration order.
>>>>> No, the hardware changes the enumeration order, it places
>>>>> _no_ guarantees on what order stuff will be found in.  So
>>>>> this is not the kernel changing, just to be clear.
>>>> Over time the kernel has changed its enumeration mechanisms,
>>>> and introduced parallelism into the process (which is a good
>>>> thing), which, from a user perspective, makes names
>>>> nondeterministic.  Yes, fixing this up by hard-coding MAC
>>>> addresses after install has been the traditional mechanism to
>>>> address this.  I think there's a better way.
>>> Ok, but that way can be done in userspace, without the need for
>>> this char device, right?
>> For the record -- when I tried to send a patch that did exactly
>> this (provided an option to use by-path persistence for network
>> drivers), it was rejected because "that doesn't work for USB".
>> 
>> True, it doesn't.  But by-mac (what we have today) doesn't work for
>> replacing motherboards in a random home system (that can't override
>> the MAC address in the BIOS), either.
> 
> If you replace a motherboard, you honestly expect no configuration to
> be needed to be changed?  If so, then don't use the MAC naming scheme
> for your systems.

What else is there?  biosdevname doesn't work with this BIOS.  It looks
like at least path_id has been updated to work with NICs now, so that
might work, with a bit of custom rule hacking.

Or at least, it won't work any more poorly than for disks, which seem to
work pretty well...  :-)

>>> But this code is not a requirement to "solve" the fact that
>>> network devices can show up in different order, that problem can
>>> be solved as long as the user picks a single way to name the
>>> devices, using tools that are already present today in distros.
>> This code is not a requirement, no.  But -- as you say -- it does 
>> provide a halfway-decent way to assign multiple names to a NIC.
>> And that provides admins the choice to use a couple different
>> persistence schemes, depending on how they expect their hardware to
>> work.
> 
> But the names need to then be resolved back to a "real" kernel name
> in order to do anything with that network connection, as the char
> devices are not real ones.  So that adds an additional layer of
> complexity on all of the system configuration tools.

Yes, that is true -- and no, this change isn't perfect.  But it lets me
have multiple "names" per interface, and have "names" that are longer
than IFNAMSIZ, though, which is why I like it.

(Now, if open() would return effectively a netlink socket bound to that
ifindex already, such that the program didn't need to fill in the
various ifindex fields for e.g. rtnetlink... but it's probably really
hard to do that, so this isn't a serious suggestion.)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 260 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[Kurt Van Dijck]

On Sat, Oct 10, 2009 at 11:32:19AM -0700, Stephen Hemminger wrote:
> > On Fri, Oct 09, 2009 at 07:44:01PM -0700, Stephen Hemminger wrote:
[...]
> 
> Why isn't the available through sysfs enough, if not why not
> add the necessary attributes there.
True. If sysfs is not sufficient, what exact naming scheme could be
applied that the chardev based naming could use?
> 
[...]

Kurt

Re: PATCH: Network Device Naming mechanism and policy

[Kurt Van Dijck]

On Sat, Oct 10, 2009 at 11:32:19AM -0700, Stephen Hemminger wrote:
> > On Fri, Oct 09, 2009 at 07:44:01PM -0700, Stephen Hemminger wrote:
[...]
> 
> Why isn't the available through sysfs enough, if not why not
> add the necessary attributes there.
True. If sysfs is not sufficient, what exact naming scheme could be
applied that the chardev based naming could use?
> 
[...]

Kurt

Re: PATCH: Network Device Naming mechanism and policy

[Scott James Remnant]

[-- Attachment #1: Type: text/plain, Size: 693 bytes --]

On Fri, 2009-10-09 at 09:51 -0500, Matt Domsch wrote:

> As has been noted here, MAC addresses are not necessarily unique to an
> interface.  As such, we are not proposing a net/by-mac/* symlink to
> /dev/netdev/*.
> 
On the other hand, they *tend* to be unique for a wide range of systems.
This makes them pretty comparable to LABELs on disks, and we have
a /dev/disk/by-label

Remember that udev already supports symlink stacking, and priorities and
such.

I don't think there's any danger of supporting a /dev/netdev/by-mac by
default, it'll be a benefit to most and those who don't have unique MACs
will just ignore it.

Scott
-- 
Scott James Remnant
scott@ubuntu.com

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[Scott James Remnant]

[-- Attachment #1: Type: text/plain, Size: 693 bytes --]

On Fri, 2009-10-09 at 09:51 -0500, Matt Domsch wrote:

> As has been noted here, MAC addresses are not necessarily unique to an
> interface.  As such, we are not proposing a net/by-mac/* symlink to
> /dev/netdev/*.
> 
On the other hand, they *tend* to be unique for a wide range of systems.
This makes them pretty comparable to LABELs on disks, and we have
a /dev/disk/by-label

Remember that udev already supports symlink stacking, and priorities and
such.

I don't think there's any danger of supporting a /dev/netdev/by-mac by
default, it'll be a benefit to most and those who don't have unique MACs
will just ignore it.

Scott
-- 
Scott James Remnant
scott@ubuntu.com

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[Ben Hutchings]

On Mon, 2009-10-12 at 11:41 +0100, Scott James Remnant wrote:
> On Fri, 2009-10-09 at 09:51 -0500, Matt Domsch wrote:
> 
> > As has been noted here, MAC addresses are not necessarily unique to an
> > interface.  As such, we are not proposing a net/by-mac/* symlink to
> > /dev/netdev/*.
> > 
> On the other hand, they *tend* to be unique for a wide range of systems.
> This makes them pretty comparable to LABELs on disks, and we have
> a /dev/disk/by-label
[...]

MAC addresses are normally assigned automatically but can be overridden
if necessary.  In that respect they are more like UUIDs for disks.

I don't see any analogue of disk labels, though labels could conceivably
be added to some NICs using VPD.

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: PATCH: Network Device Naming mechanism and policy

[Ben Hutchings]

On Mon, 2009-10-12 at 11:41 +0100, Scott James Remnant wrote:
> On Fri, 2009-10-09 at 09:51 -0500, Matt Domsch wrote:
> 
> > As has been noted here, MAC addresses are not necessarily unique to an
> > interface.  As such, we are not proposing a net/by-mac/* symlink to
> > /dev/netdev/*.
> > 
> On the other hand, they *tend* to be unique for a wide range of systems.
> This makes them pretty comparable to LABELs on disks, and we have
> a /dev/disk/by-label
[...]

MAC addresses are normally assigned automatically but can be overridden
if necessary.  In that respect they are more like UUIDs for disks.

I don't see any analogue of disk labels, though labels could conceivably
be added to some NICs using VPD.

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: PATCH: Network Device Naming mechanism and policy

[Bryan Kadzban]

[-- Attachment #1: Type: text/plain, Size: 788 bytes --]

Bryan Kadzban wrote:
> (Now, if open() would return effectively a netlink socket bound to
> that ifindex already, such that the program didn't need to fill in
> the various ifindex fields for e.g. rtnetlink... but it's probably
> really hard to do that, so this isn't a serious suggestion.)

Wait, scratch that.  It's not "really hard", it's "almost impossible".

At open() time, you have no idea which netlink family the program wants
to communicate with.  bind() is also hard.  (In theory, you could
support bind() on this new FD -- but then why is userspace using a file
in the first place, and not a socket?)

So this is even less of a serious suggestion now.

I'd still like to be able to refer to NICs by multiple names though, if
we can find a way that works...


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 260 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[Bryan Kadzban]

[-- Attachment #1: Type: text/plain, Size: 788 bytes --]

Bryan Kadzban wrote:
> (Now, if open() would return effectively a netlink socket bound to
> that ifindex already, such that the program didn't need to fill in
> the various ifindex fields for e.g. rtnetlink... but it's probably
> really hard to do that, so this isn't a serious suggestion.)

Wait, scratch that.  It's not "really hard", it's "almost impossible".

At open() time, you have no idea which netlink family the program wants
to communicate with.  bind() is also hard.  (In theory, you could
support bind() on this new FD -- but then why is userspace using a file
in the first place, and not a socket?)

So this is even less of a serious suggestion now.

I'd still like to be able to refer to NICs by multiple names though, if
we can find a way that works...


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 260 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[Bill Nottingham]

Scott James Remnant (scott@ubuntu.com) said: 
> On the other hand, they *tend* to be unique for a wide range of systems.
> This makes them pretty comparable to LABELs on disks, and we have
> a /dev/disk/by-label
> 
> Remember that udev already supports symlink stacking, and priorities and
> such.
> 
> I don't think there's any danger of supporting a /dev/netdev/by-mac by
> default, it'll be a benefit to most and those who don't have unique MACs
> will just ignore it.

At the moment, we do not appear to get the proper change uevents from things
like 'ip link set dev <foo> address <bar>', so we can't currently maintain
these symlinks.

Bill

Re: PATCH: Network Device Naming mechanism and policy

[Bill Nottingham]

Scott James Remnant (scott@ubuntu.com) said: 
> On the other hand, they *tend* to be unique for a wide range of systems.
> This makes them pretty comparable to LABELs on disks, and we have
> a /dev/disk/by-label
> 
> Remember that udev already supports symlink stacking, and priorities and
> such.
> 
> I don't think there's any danger of supporting a /dev/netdev/by-mac by
> default, it'll be a benefit to most and those who don't have unique MACs
> will just ignore it.

At the moment, we do not appear to get the proper change uevents from things
like 'ip link set dev <foo> address <bar>', so we can't currently maintain
these symlinks.

Bill

Re: PATCH: Network Device Naming mechanism and policy

[Bill Nottingham]

Greg KH (greg@kroah.com) said: 
> > Today, port naming is completely nondeterministic.  If you have but
> > one NIC, there are few chances to get the name wrong (it'll be eth0).
> > If you have >1 NIC, chances increase to get it wrong.
> 
> That is why all distros name network devices based on the only
> deterministic thing they have today, the MAC address.  I still fail to
> see why you do not like this solution, it is honestly the only way to
> properly name network devices in a sane manner.
> 
> All distros also provide a way to easily rename the network devices, to
> place a specific name on a specific MAC address, so again, this should
> all be solved already.

No, it's not solved. Even if you have persistent names once you install,
if you ever re-image, you're likely to get *different* persistent names;
the first load will always be non-detmerministic.

The only way around this would be to have some sort of screen like:

  Would you like your network devices to be enumerated by

  [ ] MAC address
  [ ] PCI device order
  [ ] Driver name
  [ ] Other

which is just all sorts of fail in and of itself. Especially since
once you get to the point where you can coherently ask this in a
native installer, the drivers have already loaded.

Bill

Re: PATCH: Network Device Naming mechanism and policy

[Bill Nottingham]

Greg KH (greg@kroah.com) said: 
> > Today, port naming is completely nondeterministic.  If you have but
> > one NIC, there are few chances to get the name wrong (it'll be eth0).
> > If you have >1 NIC, chances increase to get it wrong.
> 
> That is why all distros name network devices based on the only
> deterministic thing they have today, the MAC address.  I still fail to
> see why you do not like this solution, it is honestly the only way to
> properly name network devices in a sane manner.
> 
> All distros also provide a way to easily rename the network devices, to
> place a specific name on a specific MAC address, so again, this should
> all be solved already.

No, it's not solved. Even if you have persistent names once you install,
if you ever re-image, you're likely to get *different* persistent names;
the first load will always be non-detmerministic.

The only way around this would be to have some sort of screen like:

  Would you like your network devices to be enumerated by

  [ ] MAC address
  [ ] PCI device order
  [ ] Driver name
  [ ] Other

which is just all sorts of fail in and of itself. Especially since
once you get to the point where you can coherently ask this in a
native installer, the drivers have already loaded.

Bill

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Mon, Oct 12, 2009 at 01:45:28PM -0400, Bill Nottingham wrote:
> Greg KH (greg@kroah.com) said: 
> > > Today, port naming is completely nondeterministic.  If you have but
> > > one NIC, there are few chances to get the name wrong (it'll be eth0).
> > > If you have >1 NIC, chances increase to get it wrong.
> > 
> > That is why all distros name network devices based on the only
> > deterministic thing they have today, the MAC address.  I still fail to
> > see why you do not like this solution, it is honestly the only way to
> > properly name network devices in a sane manner.
> > 
> > All distros also provide a way to easily rename the network devices, to
> > place a specific name on a specific MAC address, so again, this should
> > all be solved already.
> 
> No, it's not solved. Even if you have persistent names once you install,
> if you ever re-image, you're likely to get *different* persistent names;
> the first load will always be non-detmerministic.
> 
> The only way around this would be to have some sort of screen like:
> 
>   Would you like your network devices to be enumerated by
> 
>   [ ] MAC address
>   [ ] PCI device order
>   [ ] Driver name
>   [ ] Other

[ ] PCI slot name

That's one that modern systems are now reporting, and should solve
Matt's problem as well, right?

> which is just all sorts of fail in and of itself. Especially since
> once you get to the point where you can coherently ask this in a
> native installer, the drivers have already loaded.

No, the driver load order doesn't determine this, you need the drivers
loaded first before you can rename anything :)

And I don't see how Matt's proposed patch helps resolve this type of
issue any better than what we currently have today, do you?

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Mon, Oct 12, 2009 at 01:45:28PM -0400, Bill Nottingham wrote:
> Greg KH (greg@kroah.com) said: 
> > > Today, port naming is completely nondeterministic.  If you have but
> > > one NIC, there are few chances to get the name wrong (it'll be eth0).
> > > If you have >1 NIC, chances increase to get it wrong.
> > 
> > That is why all distros name network devices based on the only
> > deterministic thing they have today, the MAC address.  I still fail to
> > see why you do not like this solution, it is honestly the only way to
> > properly name network devices in a sane manner.
> > 
> > All distros also provide a way to easily rename the network devices, to
> > place a specific name on a specific MAC address, so again, this should
> > all be solved already.
> 
> No, it's not solved. Even if you have persistent names once you install,
> if you ever re-image, you're likely to get *different* persistent names;
> the first load will always be non-detmerministic.
> 
> The only way around this would be to have some sort of screen like:
> 
>   Would you like your network devices to be enumerated by
> 
>   [ ] MAC address
>   [ ] PCI device order
>   [ ] Driver name
>   [ ] Other

[ ] PCI slot name

That's one that modern systems are now reporting, and should solve
Matt's problem as well, right?

> which is just all sorts of fail in and of itself. Especially since
> once you get to the point where you can coherently ask this in a
> native installer, the drivers have already loaded.

No, the driver load order doesn't determine this, you need the drivers
loaded first before you can rename anything :)

And I don't see how Matt's proposed patch helps resolve this type of
issue any better than what we currently have today, do you?

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Bill Nottingham]

Greg KH (greg@kroah.com) said: 
> > No, it's not solved. Even if you have persistent names once you install,
> > if you ever re-image, you're likely to get *different* persistent names;
> > the first load will always be non-detmerministic.
> > 
> > The only way around this would be to have some sort of screen like:
> > 
> >   Would you like your network devices to be enumerated by
> > 
> >   [ ] MAC address
> >   [ ] PCI device order
> >   [ ] Driver name
> >   [ ] Other
> 
> [ ] PCI slot name
> 
> That's one that modern systems are now reporting, and should solve
> Matt's problem as well, right?

... maybe. On my laptop, the first 'slot' enumerated appears to be
the cardbus bridge, before the on-board ethernet. And on the desktop
next to me, the slot driver shows nothing.

> And I don't see how Matt's proposed patch helps resolve this type of
> issue any better than what we currently have today, do you?

It allows multiple addressing schemes to be active at once, which
can allow the admin to choose post-install without making an
active choice at installation. This is an improvement, even if
it doesn't solve the world.

Bill

Re: PATCH: Network Device Naming mechanism and policy

[Bill Nottingham]

Greg KH (greg@kroah.com) said: 
> > No, it's not solved. Even if you have persistent names once you install,
> > if you ever re-image, you're likely to get *different* persistent names;
> > the first load will always be non-detmerministic.
> > 
> > The only way around this would be to have some sort of screen like:
> > 
> >   Would you like your network devices to be enumerated by
> > 
> >   [ ] MAC address
> >   [ ] PCI device order
> >   [ ] Driver name
> >   [ ] Other
> 
> [ ] PCI slot name
> 
> That's one that modern systems are now reporting, and should solve
> Matt's problem as well, right?

... maybe. On my laptop, the first 'slot' enumerated appears to be
the cardbus bridge, before the on-board ethernet. And on the desktop
next to me, the slot driver shows nothing.

> And I don't see how Matt's proposed patch helps resolve this type of
> issue any better than what we currently have today, do you?

It allows multiple addressing schemes to be active at once, which
can allow the admin to choose post-install without making an
active choice at installation. This is an improvement, even if
it doesn't solve the world.

Bill

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Mon, Oct 12, 2009 at 02:07:42PM -0400, Bill Nottingham wrote:
> Greg KH (greg@kroah.com) said: 
> > > No, it's not solved. Even if you have persistent names once you install,
> > > if you ever re-image, you're likely to get *different* persistent names;
> > > the first load will always be non-detmerministic.
> > > 
> > > The only way around this would be to have some sort of screen like:
> > > 
> > >   Would you like your network devices to be enumerated by
> > > 
> > >   [ ] MAC address
> > >   [ ] PCI device order
> > >   [ ] Driver name
> > >   [ ] Other
> > 
> > [ ] PCI slot name
> > 
> > That's one that modern systems are now reporting, and should solve
> > Matt's problem as well, right?
> 
> ... maybe. On my laptop, the first 'slot' enumerated appears to be
> the cardbus bridge, before the on-board ethernet. And on the desktop
> next to me, the slot driver shows nothing.

On servers, where this matters (multiple ethernet pci devices), this
should all be present if the manufacturer wants it to be, as it is just
an ACPI table entry.

> > And I don't see how Matt's proposed patch helps resolve this type of
> > issue any better than what we currently have today, do you?
> 
> It allows multiple addressing schemes to be active at once, which
> can allow the admin to choose post-install without making an
> active choice at installation. This is an improvement, even if
> it doesn't solve the world.

But these different names can not be used by the networking stack, or in
scripts, as others have pointed out.  Which seems to be the big problem
here.

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Mon, Oct 12, 2009 at 02:07:42PM -0400, Bill Nottingham wrote:
> Greg KH (greg@kroah.com) said: 
> > > No, it's not solved. Even if you have persistent names once you install,
> > > if you ever re-image, you're likely to get *different* persistent names;
> > > the first load will always be non-detmerministic.
> > > 
> > > The only way around this would be to have some sort of screen like:
> > > 
> > >   Would you like your network devices to be enumerated by
> > > 
> > >   [ ] MAC address
> > >   [ ] PCI device order
> > >   [ ] Driver name
> > >   [ ] Other
> > 
> > [ ] PCI slot name
> > 
> > That's one that modern systems are now reporting, and should solve
> > Matt's problem as well, right?
> 
> ... maybe. On my laptop, the first 'slot' enumerated appears to be
> the cardbus bridge, before the on-board ethernet. And on the desktop
> next to me, the slot driver shows nothing.

On servers, where this matters (multiple ethernet pci devices), this
should all be present if the manufacturer wants it to be, as it is just
an ACPI table entry.

> > And I don't see how Matt's proposed patch helps resolve this type of
> > issue any better than what we currently have today, do you?
> 
> It allows multiple addressing schemes to be active at once, which
> can allow the admin to choose post-install without making an
> active choice at installation. This is an improvement, even if
> it doesn't solve the world.

But these different names can not be used by the networking stack, or in
scripts, as others have pointed out.  Which seems to be the big problem
here.

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Rob Townley]

On Sun, Oct 11, 2009 at 10:00 PM, Greg KH <greg@kroah.com> wrote:
> On Sun, Oct 11, 2009 at 04:10:03PM -0500, Rob Townley wrote:
>> So when an add-in PCI NIC has a lower MAC than the motherboard NICs,
>> the add-in cards will come before the motherboard NICs.   i don't like it.
>
> Huh?  Have you used the MAC persistant rules?  If you add a new card,
> what does it pick for it?

i have a hp-dl360 (two nics) with a fibre optic add in nic.  On a
fresh install, the add-in is eth0.  i didn't like it, but ran it for
years.

>
>> But please whatever is done, make sure ping and tracert still works when
>> telling it to use a ethX source interface:
>>
>> eth0 = 4.3.2.8, the default gateway is thru eth1.
>> ping -I eth0 208.67.222.222              FAILS
>> ping -I 4.3.2.8 208.67.222.222          WORKS
>> tracert -i eth0 -I 208.67.222.222        FAILS
>> tracert -s 4.3.2.8 -I 208.67.222.222   WORKS
>> tracert -i eth0 208.67.222.222           FAILS
>> tracert -s 4.3.2.8 208.67.222.222      WORKS
>
> Again, is what we currently have broken?  I am confused as to what this
> is referring to.

Yes, ping and traceroute are broken at least on Fedora, CentOS, and busybox.
On a multinic, multigatewayed machine, passing ethX instead of the IP
address will give the false result: "Destination Host Unreachable"
when the machine's default gateway is reached thru the other nic.   In
the following example, the default gateway is thru eth1, not eth0.
Pay attention to the text between the '*****'.

ping -c 1 -B -I  eth0 208.67.222.222
PING 208.67.222.222 (208.67.222.222) from ***** 4.3.2.8 eth0*****:
56(84) bytes of data.
From 4.3.2.8 icmp_seq=1 Destination Host Unreachable

#ping -c 1 -B -I  4.3.2.8 208.67.222.222
PING 208.67.222.222 (208.67.222.222) from ***** 4.3.2.8 *****: 56(84)
bytes of data.
64 bytes from 208.67.222.222: icmp_seq=1 ttl=55 time=562 ms



>
> greg k-h
>

Re: PATCH: Network Device Naming mechanism and policy

[Rob Townley]

On Sun, Oct 11, 2009 at 10:00 PM, Greg KH <greg@kroah.com> wrote:
> On Sun, Oct 11, 2009 at 04:10:03PM -0500, Rob Townley wrote:
>> So when an add-in PCI NIC has a lower MAC than the motherboard NICs,
>> the add-in cards will come before the motherboard NICs.   i don't like it.
>
> Huh?  Have you used the MAC persistant rules?  If you add a new card,
> what does it pick for it?

i have a hp-dl360 (two nics) with a fibre optic add in nic.  On a
fresh install, the add-in is eth0.  i didn't like it, but ran it for
years.

>
>> But please whatever is done, make sure ping and tracert still works when
>> telling it to use a ethX source interface:
>>
>> eth0 = 4.3.2.8, the default gateway is thru eth1.
>> ping -I eth0 208.67.222.222              FAILS
>> ping -I 4.3.2.8 208.67.222.222          WORKS
>> tracert -i eth0 -I 208.67.222.222        FAILS
>> tracert -s 4.3.2.8 -I 208.67.222.222   WORKS
>> tracert -i eth0 208.67.222.222           FAILS
>> tracert -s 4.3.2.8 208.67.222.222      WORKS
>
> Again, is what we currently have broken?  I am confused as to what this
> is referring to.

Yes, ping and traceroute are broken at least on Fedora, CentOS, and busybox.
On a multinic, multigatewayed machine, passing ethX instead of the IP
address will give the false result: "Destination Host Unreachable"
when the machine's default gateway is reached thru the other nic.   In
the following example, the default gateway is thru eth1, not eth0.
Pay attention to the text between the '*****'.

ping -c 1 -B -I  eth0 208.67.222.222
PING 208.67.222.222 (208.67.222.222) from ***** 4.3.2.8 eth0*****:
56(84) bytes of data.
From 4.3.2.8 icmp_seq=1 Destination Host Unreachable

#ping -c 1 -B -I  4.3.2.8 208.67.222.222
PING 208.67.222.222 (208.67.222.222) from ***** 4.3.2.8 *****: 56(84)
bytes of data.
64 bytes from 208.67.222.222: icmp_seq=1 ttlU timeV2 ms



>
> greg k-h
>

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Mon, Oct 12, 2009 at 01:35:25PM -0500, Rob Townley wrote:
> > Again, is what we currently have broken?  I am confused as to what this
> > is referring to.
> 
> Yes, ping and traceroute are broken at least on Fedora, CentOS, and busybox.
> On a multinic, multigatewayed machine, passing ethX instead of the IP
> address will give the false result: "Destination Host Unreachable"
> when the machine's default gateway is reached thru the other nic.   In
> the following example, the default gateway is thru eth1, not eth0.

Unrelated to this thread.  We're having a hard enough time making sure
this conversation accurately reflects the views and needs of everyone
involved.  Please let's not throw in another tangent.

Thanks,
Matt

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Mon, Oct 12, 2009 at 01:35:25PM -0500, Rob Townley wrote:
> > Again, is what we currently have broken?  I am confused as to what this
> > is referring to.
> 
> Yes, ping and traceroute are broken at least on Fedora, CentOS, and busybox.
> On a multinic, multigatewayed machine, passing ethX instead of the IP
> address will give the false result: "Destination Host Unreachable"
> when the machine's default gateway is reached thru the other nic.   In
> the following example, the default gateway is thru eth1, not eth0.

Unrelated to this thread.  We're having a hard enough time making sure
this conversation accurately reflects the views and needs of everyone
involved.  Please let's not throw in another tangent.

Thanks,
Matt

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[dann frazier]

On Fri, Oct 09, 2009 at 09:00:01AM -0500, Narendra K wrote:
> On Fri, Oct 09, 2009 at 07:12:07PM +0530, K, Narendra wrote:
> > > example udev config:
> > > SUBSYSTEM=="net",
> > SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> > 
> > work as well.  But coupling the ifindex to the MAC address like this
> > doesn't work.  (In general, coupling any two unrelated attributes when
> > trying to do persistent names doesn't work.)
> > 
> Attaching the latest patch incorporating review comments.
> 
> By creating character devices for every network device, we can use
> udev to maintain alternate naming policies for devices, including
> additional names for the same device, without interfering with the
> name that the kernel assigns a device.
> 
> This is conditionalized on CONFIG_NET_CDEV.  If enabled (the default),
> device nodes will automatically be created in /dev/netdev/ for each
> network device.  (/dev/net/ is already populated by the tun device.)
> 
> These device nodes are not functional at the moment - open() returns
> -ENOSYS.  Their only purpose is to provide userspace with a kernel
> name to ifindex mapping, in a form that udev can easily manage.

If the idea is just to provide a userspace-visible mapping (and
presumably take advantage of udev's infrastructure for naming) does
this need kernel changes? Could this be a hierarchy under
e.g. /etc/udev instead, using plain text files? It still means we need
something like libnetdevname for apps to do the translation, but I'm
not seeing why it matters how this map is stored. Is there some
special property of the character devices (e.g. uevents) that we're
not already getting with the existing interfaces?

-- 
dann frazier

Re: PATCH: Network Device Naming mechanism and policy

[dann frazier]

On Fri, Oct 09, 2009 at 09:00:01AM -0500, Narendra K wrote:
> On Fri, Oct 09, 2009 at 07:12:07PM +0530, K, Narendra wrote:
> > > example udev config:
> > > SUBSYSTEM="net",
> > SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> > 
> > work as well.  But coupling the ifindex to the MAC address like this
> > doesn't work.  (In general, coupling any two unrelated attributes when
> > trying to do persistent names doesn't work.)
> > 
> Attaching the latest patch incorporating review comments.
> 
> By creating character devices for every network device, we can use
> udev to maintain alternate naming policies for devices, including
> additional names for the same device, without interfering with the
> name that the kernel assigns a device.
> 
> This is conditionalized on CONFIG_NET_CDEV.  If enabled (the default),
> device nodes will automatically be created in /dev/netdev/ for each
> network device.  (/dev/net/ is already populated by the tun device.)
> 
> These device nodes are not functional at the moment - open() returns
> -ENOSYS.  Their only purpose is to provide userspace with a kernel
> name to ifindex mapping, in a form that udev can easily manage.

If the idea is just to provide a userspace-visible mapping (and
presumably take advantage of udev's infrastructure for naming) does
this need kernel changes? Could this be a hierarchy under
e.g. /etc/udev instead, using plain text files? It still means we need
something like libnetdevname for apps to do the translation, but I'm
not seeing why it matters how this map is stored. Is there some
special property of the character devices (e.g. uevents) that we're
not already getting with the existing interfaces?

-- 
dann frazier

RE: PATCH: Network Device Naming mechanism and policy

[Narendra_K]

>> These device nodes are not functional at the moment - open() returns 
>> -ENOSYS.  Their only purpose is to provide userspace with a kernel 
>> name to ifindex mapping, in a form that udev can easily manage.
>
>If the idea is just to provide a userspace-visible mapping 
>(and presumably take advantage of udev's infrastructure for 
>naming) does this need kernel changes? Could this be a 
>hierarchy under e.g. /etc/udev instead, using plain text 
>files? It still means we need something like libnetdevname for 
>apps to do the translation, but I'm not seeing why it matters 
>how this map is stored. Is there some special property of the 
>character devices (e.g. uevents) that we're not already 
>getting with the existing interfaces?

Yes. The char device by itself doesn't help in any way. But it provides
a flexible mechanism to provide multiple names for the same device, just
the way it is for disks.

With regards,
Narendra K

RE: PATCH: Network Device Naming mechanism and policy

[Narendra_K]

>> These device nodes are not functional at the moment - open() returns 
>> -ENOSYS.  Their only purpose is to provide userspace with a kernel 
>> name to ifindex mapping, in a form that udev can easily manage.
>
>If the idea is just to provide a userspace-visible mapping 
>(and presumably take advantage of udev's infrastructure for 
>naming) does this need kernel changes? Could this be a 
>hierarchy under e.g. /etc/udev instead, using plain text 
>files? It still means we need something like libnetdevname for 
>apps to do the translation, but I'm not seeing why it matters 
>how this map is stored. Is there some special property of the 
>character devices (e.g. uevents) that we're not already 
>getting with the existing interfaces?

Yes. The char device by itself doesn't help in any way. But it provides
a flexible mechanism to provide multiple names for the same device, just
the way it is for disks.

With regards,
Narendra K

Re: PATCH: Network Device Naming mechanism and policy

[dann frazier]

1;2202;0cOn Tue, Oct 13, 2009 at 10:43:49PM +0530, Narendra_K@Dell.com wrote:
> 
> >> These device nodes are not functional at the moment - open() returns 
> >> -ENOSYS.  Their only purpose is to provide userspace with a kernel 
> >> name to ifindex mapping, in a form that udev can easily manage.
> >
> >If the idea is just to provide a userspace-visible mapping 
> >(and presumably take advantage of udev's infrastructure for 
> >naming) does this need kernel changes? Could this be a 
> >hierarchy under e.g. /etc/udev instead, using plain text 
> >files? It still means we need something like libnetdevname for 
> >apps to do the translation, but I'm not seeing why it matters 
> >how this map is stored. Is there some special property of the 
> >character devices (e.g. uevents) that we're not already 
> >getting with the existing interfaces?
> 
> Yes. The char device by itself doesn't help in any way. But it provides
> a flexible mechanism to provide multiple names for the same device, just
> the way it is for disks.

Right - so any reason this couldn't be implemented completely in
userspace by having udev manipulate plain text files under say
/etc/udev/net/?

I do agree that it would be nice for admins/installers to tweak/use
nic names in a similar way to storage names (udev rules), and it might
let us take advantage of a lot of the existing udev code.

-- 
dann frazier

Re: PATCH: Network Device Naming mechanism and policy

[dann frazier]

1;2202;0cOn Tue, Oct 13, 2009 at 10:43:49PM +0530, Narendra_K@Dell.com wrote:
> 
> >> These device nodes are not functional at the moment - open() returns 
> >> -ENOSYS.  Their only purpose is to provide userspace with a kernel 
> >> name to ifindex mapping, in a form that udev can easily manage.
> >
> >If the idea is just to provide a userspace-visible mapping 
> >(and presumably take advantage of udev's infrastructure for 
> >naming) does this need kernel changes? Could this be a 
> >hierarchy under e.g. /etc/udev instead, using plain text 
> >files? It still means we need something like libnetdevname for 
> >apps to do the translation, but I'm not seeing why it matters 
> >how this map is stored. Is there some special property of the 
> >character devices (e.g. uevents) that we're not already 
> >getting with the existing interfaces?
> 
> Yes. The char device by itself doesn't help in any way. But it provides
> a flexible mechanism to provide multiple names for the same device, just
> the way it is for disks.

Right - so any reason this couldn't be implemented completely in
userspace by having udev manipulate plain text files under say
/etc/udev/net/?

I do agree that it would be nice for admins/installers to tweak/use
nic names in a similar way to storage names (udev rules), and it might
let us take advantage of a lot of the existing udev code.

-- 
dann frazier

Re: PATCH: Network Device Naming mechanism and policy

[Dan Williams]

On Sat, 2009-10-10 at 14:06 -0700, Greg KH wrote:
> On Sat, Oct 10, 2009 at 11:32:19AM -0700, Stephen Hemminger wrote:
> > 
> > BTW, for our distro, we are looking into device renaming based on PCI slot
> > because that is what router OS's do. Customers expect if they replace the card
> > in slot 0, it will come back with the same name.  This is not what server
> > customers expect.
> 
> If your bios exposes the PCI slots to userspace (through the proper ACPI
> namespace), doing this type of naming should be trivial with some simple
> udev rules, no additional kernel infrastructure is needed.

By and large, the people that care most about persistent network device
names based on *location in the machine* are server users.  This allows
hotswap of cards or single-image-multiple-machine without needing
configuration changes, which is nice.

Those users can reasonably be expected to choose hardware whose BIOS
supports the ACPI tables that (mostly) guarantee to provide actual,
stable names for their hardware.  If there's even a 10% chance that on
consumer-level systems the names won't be stable on a given boot (and I
can't see how, without BIOS support, we can guarantee 100% stability)
then it's a worthless guarantee.

If the BIOS support exists, it is trivial to use udev to create the
correct naming mechanism for your machine, either using MAC address or
BIOS-provided slot naming.  No kernel patch is required.

If the BIOS support does not exist, you are not guaranteed a stable
naming mechanism except by MAC address, because the BIOS may randomly
change enumeration based on the time of day, or it may not.  A 90 or 95%
stability guarantee is not a guarantee at all.

Third, USB enumeration will always be unstable.  Thus we have an
unsolvable discrepancy in behavior between PCI and USB.

Is this correct?

Dan

Re: PATCH: Network Device Naming mechanism and policy

[Dan Williams]

On Sat, 2009-10-10 at 14:06 -0700, Greg KH wrote:
> On Sat, Oct 10, 2009 at 11:32:19AM -0700, Stephen Hemminger wrote:
> > 
> > BTW, for our distro, we are looking into device renaming based on PCI slot
> > because that is what router OS's do. Customers expect if they replace the card
> > in slot 0, it will come back with the same name.  This is not what server
> > customers expect.
> 
> If your bios exposes the PCI slots to userspace (through the proper ACPI
> namespace), doing this type of naming should be trivial with some simple
> udev rules, no additional kernel infrastructure is needed.

By and large, the people that care most about persistent network device
names based on *location in the machine* are server users.  This allows
hotswap of cards or single-image-multiple-machine without needing
configuration changes, which is nice.

Those users can reasonably be expected to choose hardware whose BIOS
supports the ACPI tables that (mostly) guarantee to provide actual,
stable names for their hardware.  If there's even a 10% chance that on
consumer-level systems the names won't be stable on a given boot (and I
can't see how, without BIOS support, we can guarantee 100% stability)
then it's a worthless guarantee.

If the BIOS support exists, it is trivial to use udev to create the
correct naming mechanism for your machine, either using MAC address or
BIOS-provided slot naming.  No kernel patch is required.

If the BIOS support does not exist, you are not guaranteed a stable
naming mechanism except by MAC address, because the BIOS may randomly
change enumeration based on the time of day, or it may not.  A 90 or 95%
stability guarantee is not a guarantee at all.

Third, USB enumeration will always be unstable.  Thus we have an
unsolvable discrepancy in behavior between PCI and USB.

Is this correct?

Dan

Re: PATCH: Network Device Naming mechanism and policy

[Dan Williams]

On Mon, 2009-10-12 at 13:37 -0400, Bill Nottingham wrote:
> Scott James Remnant (scott@ubuntu.com) said: 
> > On the other hand, they *tend* to be unique for a wide range of systems.
> > This makes them pretty comparable to LABELs on disks, and we have
> > a /dev/disk/by-label
> > 
> > Remember that udev already supports symlink stacking, and priorities and
> > such.
> > 
> > I don't think there's any danger of supporting a /dev/netdev/by-mac by
> > default, it'll be a benefit to most and those who don't have unique MACs
> > will just ignore it.
> 
> At the moment, we do not appear to get the proper change uevents from things
> like 'ip link set dev <foo> address <bar>', so we can't currently maintain
> these symlinks.

And if we really want seamless support for MAC spoofing, we want
ETHTOOL_GPERMADDR for all drivers too, so that if your configuration
says "rename device XX:XX:XX:XX:XX:XX to YY:YY:YY:YY:YY:YY" we can
actually figure stuff out after the spoof.

Dan

Re: PATCH: Network Device Naming mechanism and policy

[Dan Williams]

On Mon, 2009-10-12 at 13:37 -0400, Bill Nottingham wrote:
> Scott James Remnant (scott@ubuntu.com) said: 
> > On the other hand, they *tend* to be unique for a wide range of systems.
> > This makes them pretty comparable to LABELs on disks, and we have
> > a /dev/disk/by-label
> > 
> > Remember that udev already supports symlink stacking, and priorities and
> > such.
> > 
> > I don't think there's any danger of supporting a /dev/netdev/by-mac by
> > default, it'll be a benefit to most and those who don't have unique MACs
> > will just ignore it.
> 
> At the moment, we do not appear to get the proper change uevents from things
> like 'ip link set dev <foo> address <bar>', so we can't currently maintain
> these symlinks.

And if we really want seamless support for MAC spoofing, we want
ETHTOOL_GPERMADDR for all drivers too, so that if your configuration
says "rename device XX:XX:XX:XX:XX:XX to YY:YY:YY:YY:YY:YY" we can
actually figure stuff out after the spoof.

Dan

RE: PATCH: Network Device Naming mechanism and policy

[Narendra_K]

>If the BIOS support exists, it is trivial to use udev to 
>create the correct naming mechanism for your machine, either 
>using MAC address or BIOS-provided slot naming.  No kernel 
>patch is required.
>

Yes. In case, we want to rename only once. MAC address or slot names do
provide persistent naming. They help in retaining whatever names are
assigned during install time, which is the first instantiation of the
OS. But these names may not be as expected (like first on board network
interface name is expected to be "eth0" which is not always the case and
might not reflect what is written on the chassis label as "Gb1" and
"Gb2" etc) which would result in unattended installs break. Also image
based deployments will face problems by introducing state such as MAC
address. 

With regards,
Narendra K

Re: PATCH: Network Device Naming mechanism and policy

[Ben Hutchings]

On Tue, 2009-10-13 at 11:06 -0700, Dan Williams wrote:
> On Mon, 2009-10-12 at 13:37 -0400, Bill Nottingham wrote:
> > Scott James Remnant (scott@ubuntu.com) said: 
> > > On the other hand, they *tend* to be unique for a wide range of systems.
> > > This makes them pretty comparable to LABELs on disks, and we have
> > > a /dev/disk/by-label
> > > 
> > > Remember that udev already supports symlink stacking, and priorities and
> > > such.
> > > 
> > > I don't think there's any danger of supporting a /dev/netdev/by-mac by
> > > default, it'll be a benefit to most and those who don't have unique MACs
> > > will just ignore it.
> > 
> > At the moment, we do not appear to get the proper change uevents from things
> > like 'ip link set dev <foo> address <bar>', so we can't currently maintain
> > these symlinks.
> 
> And if we really want seamless support for MAC spoofing, we want
> ETHTOOL_GPERMADDR for all drivers too, so that if your configuration
> says "rename device XX:XX:XX:XX:XX:XX to YY:YY:YY:YY:YY:YY" we can
> actually figure stuff out after the spoof.

ETHTOOL_GPERMADDR is handled in the ethtool core now.  Are you thinking
of drivers that don't have ethtool ops?  Maybe it's time to add default
operations.

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: PATCH: Network Device Naming mechanism and policy

[Ben Hutchings]

On Tue, 2009-10-13 at 11:06 -0700, Dan Williams wrote:
> On Mon, 2009-10-12 at 13:37 -0400, Bill Nottingham wrote:
> > Scott James Remnant (scott@ubuntu.com) said: 
> > > On the other hand, they *tend* to be unique for a wide range of systems.
> > > This makes them pretty comparable to LABELs on disks, and we have
> > > a /dev/disk/by-label
> > > 
> > > Remember that udev already supports symlink stacking, and priorities and
> > > such.
> > > 
> > > I don't think there's any danger of supporting a /dev/netdev/by-mac by
> > > default, it'll be a benefit to most and those who don't have unique MACs
> > > will just ignore it.
> > 
> > At the moment, we do not appear to get the proper change uevents from things
> > like 'ip link set dev <foo> address <bar>', so we can't currently maintain
> > these symlinks.
> 
> And if we really want seamless support for MAC spoofing, we want
> ETHTOOL_GPERMADDR for all drivers too, so that if your configuration
> says "rename device XX:XX:XX:XX:XX:XX to YY:YY:YY:YY:YY:YY" we can
> actually figure stuff out after the spoof.

ETHTOOL_GPERMADDR is handled in the ethtool core now.  Are you thinking
of drivers that don't have ethtool ops?  Maybe it's time to add default
operations.

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

RE: PATCH: Network Device Naming mechanism and policy

[Narendra_K]

>If the BIOS support exists, it is trivial to use udev to 
>create the correct naming mechanism for your machine, either 
>using MAC address or BIOS-provided slot naming.  No kernel 
>patch is required.
>

Yes. In case, we want to rename only once. MAC address or slot names do
provide persistent naming. They help in retaining whatever names are
assigned during install time, which is the first instantiation of the
OS. But these names may not be as expected (like first on board network
interface name is expected to be "eth0" which is not always the case and
might not reflect what is written on the chassis label as "Gb1" and
"Gb2" etc) which would result in unattended installs break. Also image
based deployments will face problems by introducing state such as MAC
address. 

With regards,
Narendra K

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Tue, Oct 13, 2009 at 10:43:49PM +0530, Narendra_K@Dell.com wrote:
> 
> >> These device nodes are not functional at the moment - open() returns 
> >> -ENOSYS.  Their only purpose is to provide userspace with a kernel 
> >> name to ifindex mapping, in a form that udev can easily manage.
> >
> >If the idea is just to provide a userspace-visible mapping 
> >(and presumably take advantage of udev's infrastructure for 
> >naming) does this need kernel changes? Could this be a 
> >hierarchy under e.g. /etc/udev instead, using plain text 
> >files? It still means we need something like libnetdevname for 
> >apps to do the translation, but I'm not seeing why it matters 
> >how this map is stored. Is there some special property of the 
> >character devices (e.g. uevents) that we're not already 
> >getting with the existing interfaces?
> 
> Yes. The char device by itself doesn't help in any way. But it provides
> a flexible mechanism to provide multiple names for the same device, just
> the way it is for disks.

No, it's quite different than disks in that the symlinks, _and_ the
device nodes do absolutly nothing.  And any reference to a name that is
a symlink will not work with any existing network tool, you will have to
do some kind of lookup to determine which network device you really were
referring to.

These links end up being useless, and confusing, I still don't see how
you can use them for anything.

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Tue, Oct 13, 2009 at 10:43:49PM +0530, Narendra_K@Dell.com wrote:
> 
> >> These device nodes are not functional at the moment - open() returns 
> >> -ENOSYS.  Their only purpose is to provide userspace with a kernel 
> >> name to ifindex mapping, in a form that udev can easily manage.
> >
> >If the idea is just to provide a userspace-visible mapping 
> >(and presumably take advantage of udev's infrastructure for 
> >naming) does this need kernel changes? Could this be a 
> >hierarchy under e.g. /etc/udev instead, using plain text 
> >files? It still means we need something like libnetdevname for 
> >apps to do the translation, but I'm not seeing why it matters 
> >how this map is stored. Is there some special property of the 
> >character devices (e.g. uevents) that we're not already 
> >getting with the existing interfaces?
> 
> Yes. The char device by itself doesn't help in any way. But it provides
> a flexible mechanism to provide multiple names for the same device, just
> the way it is for disks.

No, it's quite different than disks in that the symlinks, _and_ the
device nodes do absolutly nothing.  And any reference to a name that is
a symlink will not work with any existing network tool, you will have to
do some kind of lookup to determine which network device you really were
referring to.

These links end up being useless, and confusing, I still don't see how
you can use them for anything.

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[John W. Linville]

On Tue, Oct 13, 2009 at 07:53:04PM +0100, Ben Hutchings wrote:
> On Tue, 2009-10-13 at 11:06 -0700, Dan Williams wrote:

> > And if we really want seamless support for MAC spoofing, we want
> > ETHTOOL_GPERMADDR for all drivers too, so that if your configuration
> > says "rename device XX:XX:XX:XX:XX:XX to YY:YY:YY:YY:YY:YY" we can
> > actually figure stuff out after the spoof.
> 
> ETHTOOL_GPERMADDR is handled in the ethtool core now.  Are you thinking
> of drivers that don't have ethtool ops?  Maybe it's time to add default
> operations.

Not quite true -- dev->perm_addr still has to be set by the driver.

John
-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

Re: PATCH: Network Device Naming mechanism and policy

[John W. Linville]

On Tue, Oct 13, 2009 at 07:53:04PM +0100, Ben Hutchings wrote:
> On Tue, 2009-10-13 at 11:06 -0700, Dan Williams wrote:

> > And if we really want seamless support for MAC spoofing, we want
> > ETHTOOL_GPERMADDR for all drivers too, so that if your configuration
> > says "rename device XX:XX:XX:XX:XX:XX to YY:YY:YY:YY:YY:YY" we can
> > actually figure stuff out after the spoof.
> 
> ETHTOOL_GPERMADDR is handled in the ethtool core now.  Are you thinking
> of drivers that don't have ethtool ops?  Maybe it's time to add default
> operations.

Not quite true -- dev->perm_addr still has to be set by the driver.

John
-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

RE: PATCH: Network Device Naming mechanism and policy

[Jordan_Hargrave]

We have developed a mapping library that will convert the user-friendly symlink names to the kernel names necessary for socket ioctls.  All network tools that normally take ethX as argument have been modified to use this mapping library.  Usually it's just a one-line addition when parsing the command line arguments.


--jordan hargrave
Dell Enterprise Linux Engineering



-----Original Message-----
From: Greg KH [mailto:greg@kroah.com]
Sent: Tue 10/13/2009 14:51
To: K, Narendra
Cc: dannf@hp.com; netdev@vger.kernel.org; linux-hotplug@vger.kernel.org; Domsch, Matt; Hargrave, Jordan; Rose, Charles
Subject: Re: PATCH: Network Device Naming mechanism and policy
 
On Tue, Oct 13, 2009 at 10:43:49PM +0530, Narendra_K@Dell.com wrote:
> 
> >> These device nodes are not functional at the moment - open() returns 
> >> -ENOSYS.  Their only purpose is to provide userspace with a kernel 
> >> name to ifindex mapping, in a form that udev can easily manage.
> >
> >If the idea is just to provide a userspace-visible mapping 
> >(and presumably take advantage of udev's infrastructure for 
> >naming) does this need kernel changes? Could this be a 
> >hierarchy under e.g. /etc/udev instead, using plain text 
> >files? It still means we need something like libnetdevname for 
> >apps to do the translation, but I'm not seeing why it matters 
> >how this map is stored. Is there some special property of the 
> >character devices (e.g. uevents) that we're not already 
> >getting with the existing interfaces?
> 
> Yes. The char device by itself doesn't help in any way. But it provides
> a flexible mechanism to provide multiple names for the same device, just
> the way it is for disks.

No, it's quite different than disks in that the symlinks, _and_ the
device nodes do absolutly nothing.  And any reference to a name that is
a symlink will not work with any existing network tool, you will have to
do some kind of lookup to determine which network device you really were
referring to.

These links end up being useless, and confusing, I still don't see how
you can use them for anything.

thanks,

greg k-h

RE: PATCH: Network Device Naming mechanism and policy

[Jordan_Hargrave]

We have developed a mapping library that will convert the user-friendly symlink names to the kernel names necessary for socket ioctls.  All network tools that normally take ethX as argument have been modified to use this mapping library.  Usually it's just a one-line addition when parsing the command line arguments.


--jordan hargrave
Dell Enterprise Linux Engineering



-----Original Message-----
From: Greg KH [mailto:greg@kroah.com]
Sent: Tue 10/13/2009 14:51
To: K, Narendra
Cc: dannf@hp.com; netdev@vger.kernel.org; linux-hotplug@vger.kernel.org; Domsch, Matt; Hargrave, Jordan; Rose, Charles
Subject: Re: PATCH: Network Device Naming mechanism and policy
 
On Tue, Oct 13, 2009 at 10:43:49PM +0530, Narendra_K@Dell.com wrote:
> 
> >> These device nodes are not functional at the moment - open() returns 
> >> -ENOSYS.  Their only purpose is to provide userspace with a kernel 
> >> name to ifindex mapping, in a form that udev can easily manage.
> >
> >If the idea is just to provide a userspace-visible mapping 
> >(and presumably take advantage of udev's infrastructure for 
> >naming) does this need kernel changes? Could this be a 
> >hierarchy under e.g. /etc/udev instead, using plain text 
> >files? It still means we need something like libnetdevname for 
> >apps to do the translation, but I'm not seeing why it matters 
> >how this map is stored. Is there some special property of the 
> >character devices (e.g. uevents) that we're not already 
> >getting with the existing interfaces?
> 
> Yes. The char device by itself doesn't help in any way. But it provides
> a flexible mechanism to provide multiple names for the same device, just
> the way it is for disks.

No, it's quite different than disks in that the symlinks, _and_ the
device nodes do absolutly nothing.  And any reference to a name that is
a symlink will not work with any existing network tool, you will have to
do some kind of lookup to determine which network device you really were
referring to.

These links end up being useless, and confusing, I still don't see how
you can use them for anything.

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

A: No.
Q: Should I include quotations after my reply?

http://daringfireball.net/2007/07/on_top

On Tue, Oct 13, 2009 at 03:00:59PM -0500, Jordan_Hargrave@Dell.com wrote:
> We have developed a mapping library that will convert the
> user-friendly symlink names to the kernel names necessary for socket
> ioctls.  All network tools that normally take ethX as argument have
> been modified to use this mapping library.  Usually it's just a
> one-line addition when parsing the command line arguments.

Either I missed this in the first message in this thread, or this was
never stated before, but that is nice.  Where is this library, and will
it be accepted by the upstream tool maintainers?

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

A: No.
Q: Should I include quotations after my reply?

http://daringfireball.net/2007/07/on_top

On Tue, Oct 13, 2009 at 03:00:59PM -0500, Jordan_Hargrave@Dell.com wrote:
> We have developed a mapping library that will convert the
> user-friendly symlink names to the kernel names necessary for socket
> ioctls.  All network tools that normally take ethX as argument have
> been modified to use this mapping library.  Usually it's just a
> one-line addition when parsing the command line arguments.

Either I missed this in the first message in this thread, or this was
never stated before, but that is nice.  Where is this library, and will
it be accepted by the upstream tool maintainers?

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Tue, Oct 13, 2009 at 01:19:31PM -0700, Greg KH wrote:
> On Tue, Oct 13, 2009 at 03:00:59PM -0500, Jordan_Hargrave@Dell.com wrote:
> > We have developed a mapping library that will convert the
> > user-friendly symlink names to the kernel names necessary for socket
> > ioctls.  All network tools that normally take ethX as argument have
> > been modified to use this mapping library.  Usually it's just a
> > one-line addition when parsing the command line arguments.
> 
> Either I missed this in the first message in this thread, or this was
> never stated before, but that is nice.  Where is this library,

It was not noted in the initial patch post, but I did note it
immediately thereafter.

 Let me also note that we are prepared to have userspace consumers of
 this new character device node.
 
 http://linux.dell.com/wiki/index.php/Oss/libnetdevname
 
 notes how the kernel patch will interact with udev, describes the new
 library helper function in libnetdevname, and has patches for
 net-tools, iproute2, and ethtool to make use of the helper function.
 
 As has been noted here, MAC addresses are not necessarily unique to an
 interface.  As such, we are not proposing a net/by-mac/* symlink to
 /dev/netdev/*.


> and will it be accepted by the upstream tool maintainers?

Unknown, we haven't proposed it to any yet as it's irrelevant until
there is general acceptance of the approach (kernel or otherwise).  I
figured we'd start with the kernel discussion, and show how it could
be used.

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Tue, Oct 13, 2009 at 01:19:31PM -0700, Greg KH wrote:
> On Tue, Oct 13, 2009 at 03:00:59PM -0500, Jordan_Hargrave@Dell.com wrote:
> > We have developed a mapping library that will convert the
> > user-friendly symlink names to the kernel names necessary for socket
> > ioctls.  All network tools that normally take ethX as argument have
> > been modified to use this mapping library.  Usually it's just a
> > one-line addition when parsing the command line arguments.
> 
> Either I missed this in the first message in this thread, or this was
> never stated before, but that is nice.  Where is this library,

It was not noted in the initial patch post, but I did note it
immediately thereafter.

 Let me also note that we are prepared to have userspace consumers of
 this new character device node.
 
 http://linux.dell.com/wiki/index.php/Oss/libnetdevname
 
 notes how the kernel patch will interact with udev, describes the new
 library helper function in libnetdevname, and has patches for
 net-tools, iproute2, and ethtool to make use of the helper function.
 
 As has been noted here, MAC addresses are not necessarily unique to an
 interface.  As such, we are not proposing a net/by-mac/* symlink to
 /dev/netdev/*.


> and will it be accepted by the upstream tool maintainers?

Unknown, we haven't proposed it to any yet as it's irrelevant until
there is general acceptance of the approach (kernel or otherwise).  I
figured we'd start with the kernel discussion, and show how it could
be used.

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[dann frazier]

On Tue, Oct 13, 2009 at 01:19:31PM -0700, Greg KH wrote:
> 
> A: No.
> Q: Should I include quotations after my reply?
> 
> http://daringfireball.net/2007/07/on_top
> 
> On Tue, Oct 13, 2009 at 03:00:59PM -0500, Jordan_Hargrave@Dell.com wrote:
> > We have developed a mapping library that will convert the
> > user-friendly symlink names to the kernel names necessary for socket
> > ioctls.  All network tools that normally take ethX as argument have
> > been modified to use this mapping library.  Usually it's just a
> > one-line addition when parsing the command line arguments.
> 
> Either I missed this in the first message in this thread, or this was
> never stated before, but that is nice.  Where is this library,

I read about it here:
  http://linux.dell.com/wiki/index.php/Oss/libnetdevname#libnetdevname

Source appears to be here:
  http://linux.dell.com/git/?p=libnetdevname.git;a=summary

> and will
> it be accepted by the upstream tool maintainers?

-- 
dann frazier

Re: PATCH: Network Device Naming mechanism and policy

[dann frazier]

On Tue, Oct 13, 2009 at 01:19:31PM -0700, Greg KH wrote:
> 
> A: No.
> Q: Should I include quotations after my reply?
> 
> http://daringfireball.net/2007/07/on_top
> 
> On Tue, Oct 13, 2009 at 03:00:59PM -0500, Jordan_Hargrave@Dell.com wrote:
> > We have developed a mapping library that will convert the
> > user-friendly symlink names to the kernel names necessary for socket
> > ioctls.  All network tools that normally take ethX as argument have
> > been modified to use this mapping library.  Usually it's just a
> > one-line addition when parsing the command line arguments.
> 
> Either I missed this in the first message in this thread, or this was
> never stated before, but that is nice.  Where is this library,

I read about it here:
  http://linux.dell.com/wiki/index.php/Oss/libnetdevname#libnetdevname

Source appears to be here:
  http://linux.dell.com/git/?p=libnetdevname.git;a=summary

> and will
> it be accepted by the upstream tool maintainers?

-- 
dann frazier

Re: PATCH: Network Device Naming mechanism and policy

[dann frazier]

On Tue, Oct 13, 2009 at 11:36:38AM -0600, dann frazier wrote:
> 1;2202;0cOn Tue, Oct 13, 2009 at 10:43:49PM +0530, Narendra_K@Dell.com wrote:
> > 
> > >> These device nodes are not functional at the moment - open() returns 
> > >> -ENOSYS.  Their only purpose is to provide userspace with a kernel 
> > >> name to ifindex mapping, in a form that udev can easily manage.
> > >
> > >If the idea is just to provide a userspace-visible mapping 
> > >(and presumably take advantage of udev's infrastructure for 
> > >naming) does this need kernel changes? Could this be a 
> > >hierarchy under e.g. /etc/udev instead, using plain text 
> > >files? It still means we need something like libnetdevname for 
> > >apps to do the translation, but I'm not seeing why it matters 
> > >how this map is stored. Is there some special property of the 
> > >character devices (e.g. uevents) that we're not already 
> > >getting with the existing interfaces?
> > 
> > Yes. The char device by itself doesn't help in any way. But it provides
> > a flexible mechanism to provide multiple names for the same device, just
> > the way it is for disks.
> 
> Right - so any reason this couldn't be implemented completely in
> userspace by having udev manipulate plain text files under say
> /etc/udev/net/?
> 
> I do agree that it would be nice for admins/installers to tweak/use
> nic names in a similar way to storage names (udev rules), and it might
> let us take advantage of a lot of the existing udev code.

Is there interest in this approach?

 - modify udev to manage network devices names as regular (non-device)
   files (stored in /etc/udev, /dev/netdev, or wherever)
 - use the existing udev rules to manage symlinks to these files
 - point libnetdevname at these text files for its name resolution

I've started prototyping this, and it certainly looks possible w/o any
kernel changes. However, I could probably use some advice from a udev
person to do a proper implementation.

-- 
dann frazier

Re: PATCH: Network Device Naming mechanism and policy

[dann frazier]

On Tue, Oct 13, 2009 at 11:36:38AM -0600, dann frazier wrote:
> 1;2202;0cOn Tue, Oct 13, 2009 at 10:43:49PM +0530, Narendra_K@Dell.com wrote:
> > 
> > >> These device nodes are not functional at the moment - open() returns 
> > >> -ENOSYS.  Their only purpose is to provide userspace with a kernel 
> > >> name to ifindex mapping, in a form that udev can easily manage.
> > >
> > >If the idea is just to provide a userspace-visible mapping 
> > >(and presumably take advantage of udev's infrastructure for 
> > >naming) does this need kernel changes? Could this be a 
> > >hierarchy under e.g. /etc/udev instead, using plain text 
> > >files? It still means we need something like libnetdevname for 
> > >apps to do the translation, but I'm not seeing why it matters 
> > >how this map is stored. Is there some special property of the 
> > >character devices (e.g. uevents) that we're not already 
> > >getting with the existing interfaces?
> > 
> > Yes. The char device by itself doesn't help in any way. But it provides
> > a flexible mechanism to provide multiple names for the same device, just
> > the way it is for disks.
> 
> Right - so any reason this couldn't be implemented completely in
> userspace by having udev manipulate plain text files under say
> /etc/udev/net/?
> 
> I do agree that it would be nice for admins/installers to tweak/use
> nic names in a similar way to storage names (udev rules), and it might
> let us take advantage of a lot of the existing udev code.

Is there interest in this approach?

 - modify udev to manage network devices names as regular (non-device)
   files (stored in /etc/udev, /dev/netdev, or wherever)
 - use the existing udev rules to manage symlinks to these files
 - point libnetdevname at these text files for its name resolution

I've started prototyping this, and it certainly looks possible w/o any
kernel changes. However, I could probably use some advice from a udev
person to do a proper implementation.

-- 
dann frazier

RE: PATCH: Network Device Naming mechanism and policy

[Narendra_K]

>On Tue, Oct 13, 2009 at 11:36:38AM -0600, dann frazier wrote:
>> Right - so any reason this couldn't be implemented completely in 
>> userspace by having udev manipulate plain text files under say 
>> /etc/udev/net/?
>> 
>> I do agree that it would be nice for admins/installers to tweak/use 
>> nic names in a similar way to storage names (udev rules), 
>and it might 
>> let us take advantage of a lot of the existing udev code.
>
>Is there interest in this approach?
> - modify udev to manage network devices names as regular (non-device)
>   files (stored in /etc/udev, /dev/netdev, or wherever)

Yes. Would you elaborate little more on "modify udev to manage network
devices as regular files". Does it mean some custom rules which will
generate a regular file under, say, /dev/netdev/ or extend udev itself ?
And how would the regular file look like in terms of holding ifindex of
the interface, which can be passed to libnetdevname.


> - use the existing udev rules to manage symlinks to these files
> - point libnetdevname at these text files for its name resolution
>
>I've started prototyping this, and it certainly looks possible 
>w/o any kernel changes. However, I could probably use some 
>advice from a udev person to do a proper implementation.

With regards,
Narendra K  

RE: PATCH: Network Device Naming mechanism and policy

[Narendra_K]

>On Tue, Oct 13, 2009 at 11:36:38AM -0600, dann frazier wrote:
>> Right - so any reason this couldn't be implemented completely in 
>> userspace by having udev manipulate plain text files under say 
>> /etc/udev/net/?
>> 
>> I do agree that it would be nice for admins/installers to tweak/use 
>> nic names in a similar way to storage names (udev rules), 
>and it might 
>> let us take advantage of a lot of the existing udev code.
>
>Is there interest in this approach?
> - modify udev to manage network devices names as regular (non-device)
>   files (stored in /etc/udev, /dev/netdev, or wherever)

Yes. Would you elaborate little more on "modify udev to manage network
devices as regular files". Does it mean some custom rules which will
generate a regular file under, say, /dev/netdev/ or extend udev itself ?
And how would the regular file look like in terms of holding ifindex of
the interface, which can be passed to libnetdevname.


> - use the existing udev rules to manage symlinks to these files
> - point libnetdevname at these text files for its name resolution
>
>I've started prototyping this, and it certainly looks possible 
>w/o any kernel changes. However, I could probably use some 
>advice from a udev person to do a proper implementation.

With regards,
Narendra K  

Re: PATCH: Network Device Naming mechanism and policy

[dann frazier]

On Fri, Oct 16, 2009 at 07:32:50PM +0530, Narendra_K@Dell.com wrote:
> 
> >On Tue, Oct 13, 2009 at 11:36:38AM -0600, dann frazier wrote:
> >> Right - so any reason this couldn't be implemented completely in 
> >> userspace by having udev manipulate plain text files under say 
> >> /etc/udev/net/?
> >> 
> >> I do agree that it would be nice for admins/installers to tweak/use 
> >> nic names in a similar way to storage names (udev rules), 
> >and it might 
> >> let us take advantage of a lot of the existing udev code.
> >
> >Is there interest in this approach?
> > - modify udev to manage network devices names as regular (non-device)
> >   files (stored in /etc/udev, /dev/netdev, or wherever)
> 
> Yes. Would you elaborate little more on "modify udev to manage network
> devices as regular files".

Sure. We already get an event when netifs get added/removed - udev
just doesn't create a device file for it. And since all we care about
is the file's name (and the symlinks to it), there's really no point
in creating a real device file anyway.

So, instead of 'mknod /dev/netdev/eth0', why not just 'touch
/dev/netdev/eth0'? A file exists, so we can still maintain
aliases as symlinks, we just don't need to modify the kernel.

> Does it mean some custom rules which will
> generate a regular file under, say, /dev/netdev/ or extend udev
> itself ?

I believe we have to extend udev itself. We could probably do this
completely within udev rules by running programs that do the touching
and symlinking, but it would be nicer and more consistent/familiar to
take advantage of the udev syntax (SYMLINK) to do this
natively. Besides, udev already has the logic to know when/how to
instantiate and unlink symlinks, it would suck to duplicate that.

So, udev would need to be modified to know how to go through the
normal "node" creation for net devices, and to call creat() instead of
mknod().

> And how would the regular file look like in terms of holding ifindex of
> the interface, which can be passed to libnetdevname.

I can't think of anything we need to store in the regular file. If we
have the kernel name for the device, we can look up the ifindex in
/sys. Correct me if I'm wrong, but storing it ourselves seems
redundant.

> 
> 
> > - use the existing udev rules to manage symlinks to these files
> > - point libnetdevname at these text files for its name resolution
> >
> >I've started prototyping this, and it certainly looks possible 
> >w/o any kernel changes. However, I could probably use some 
> >advice from a udev person to do a proper implementation.
> 
> With regards,
> Narendra K  

-- 
dann frazier

Re: PATCH: Network Device Naming mechanism and policy

[dann frazier]

On Fri, Oct 16, 2009 at 07:32:50PM +0530, Narendra_K@Dell.com wrote:
> 
> >On Tue, Oct 13, 2009 at 11:36:38AM -0600, dann frazier wrote:
> >> Right - so any reason this couldn't be implemented completely in 
> >> userspace by having udev manipulate plain text files under say 
> >> /etc/udev/net/?
> >> 
> >> I do agree that it would be nice for admins/installers to tweak/use 
> >> nic names in a similar way to storage names (udev rules), 
> >and it might 
> >> let us take advantage of a lot of the existing udev code.
> >
> >Is there interest in this approach?
> > - modify udev to manage network devices names as regular (non-device)
> >   files (stored in /etc/udev, /dev/netdev, or wherever)
> 
> Yes. Would you elaborate little more on "modify udev to manage network
> devices as regular files".

Sure. We already get an event when netifs get added/removed - udev
just doesn't create a device file for it. And since all we care about
is the file's name (and the symlinks to it), there's really no point
in creating a real device file anyway.

So, instead of 'mknod /dev/netdev/eth0', why not just 'touch
/dev/netdev/eth0'? A file exists, so we can still maintain
aliases as symlinks, we just don't need to modify the kernel.

> Does it mean some custom rules which will
> generate a regular file under, say, /dev/netdev/ or extend udev
> itself ?

I believe we have to extend udev itself. We could probably do this
completely within udev rules by running programs that do the touching
and symlinking, but it would be nicer and more consistent/familiar to
take advantage of the udev syntax (SYMLINK) to do this
natively. Besides, udev already has the logic to know when/how to
instantiate and unlink symlinks, it would suck to duplicate that.

So, udev would need to be modified to know how to go through the
normal "node" creation for net devices, and to call creat() instead of
mknod().

> And how would the regular file look like in terms of holding ifindex of
> the interface, which can be passed to libnetdevname.

I can't think of anything we need to store in the regular file. If we
have the kernel name for the device, we can look up the ifindex in
/sys. Correct me if I'm wrong, but storing it ourselves seems
redundant.

> 
> 
> > - use the existing udev rules to manage symlinks to these files
> > - point libnetdevname at these text files for its name resolution
> >
> >I've started prototyping this, and it certainly looks possible 
> >w/o any kernel changes. However, I could probably use some 
> >advice from a udev person to do a proper implementation.
> 
> With regards,
> Narendra K  

-- 
dann frazier

Re: PATCH: Network Device Naming mechanism and policy

[Ben Hutchings]

On Fri, 2009-10-16 at 09:20 -0600, dann frazier wrote:
> On Fri, Oct 16, 2009 at 07:32:50PM +0530, Narendra_K@Dell.com wrote:
[...]
> > And how would the regular file look like in terms of holding ifindex of
> > the interface, which can be passed to libnetdevname.
> 
> I can't think of anything we need to store in the regular file. If we
> have the kernel name for the device, we can look up the ifindex in
> /sys. Correct me if I'm wrong, but storing it ourselves seems
> redundant.

But the name of a netdev can change whereas its ifindex never does.
Identifying netdevs by name would require additional work to update the
links when a netdev is renamed and would still be prone to race
conditions.  This is why Narendra and Matt were proposing to store the
ifindex in the node all along...

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: PATCH: Network Device Naming mechanism and policy

[Ben Hutchings]

On Fri, 2009-10-16 at 09:20 -0600, dann frazier wrote:
> On Fri, Oct 16, 2009 at 07:32:50PM +0530, Narendra_K@Dell.com wrote:
[...]
> > And how would the regular file look like in terms of holding ifindex of
> > the interface, which can be passed to libnetdevname.
> 
> I can't think of anything we need to store in the regular file. If we
> have the kernel name for the device, we can look up the ifindex in
> /sys. Correct me if I'm wrong, but storing it ourselves seems
> redundant.

But the name of a netdev can change whereas its ifindex never does.
Identifying netdevs by name would require additional work to update the
links when a netdev is renamed and would still be prone to race
conditions.  This is why Narendra and Matt were proposing to store the
ifindex in the node all along...

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: PATCH: Network Device Naming mechanism and policy

[dann frazier]

On Fri, Oct 16, 2009 at 04:33:13PM +0100, Ben Hutchings wrote:
> On Fri, 2009-10-16 at 09:20 -0600, dann frazier wrote:
> > On Fri, Oct 16, 2009 at 07:32:50PM +0530, Narendra_K@Dell.com wrote:
> [...]
> > > And how would the regular file look like in terms of holding ifindex of
> > > the interface, which can be passed to libnetdevname.
> > 
> > I can't think of anything we need to store in the regular file. If we
> > have the kernel name for the device, we can look up the ifindex in
> > /sys. Correct me if I'm wrong, but storing it ourselves seems
> > redundant.
> 
> But the name of a netdev can change whereas its ifindex never does.
> Identifying netdevs by name would require additional work to update the
> links when a netdev is renamed and would still be prone to race
> conditions.  This is why Narendra and Matt were proposing to store the
> ifindex in the node all along...

ah, yes - I see that now - the ability to rename an interface is what
prevents this from working. Thanks for the explanation.
-- 
dann frazier

Re: PATCH: Network Device Naming mechanism and policy

[dann frazier]

On Fri, Oct 16, 2009 at 04:33:13PM +0100, Ben Hutchings wrote:
> On Fri, 2009-10-16 at 09:20 -0600, dann frazier wrote:
> > On Fri, Oct 16, 2009 at 07:32:50PM +0530, Narendra_K@Dell.com wrote:
> [...]
> > > And how would the regular file look like in terms of holding ifindex of
> > > the interface, which can be passed to libnetdevname.
> > 
> > I can't think of anything we need to store in the regular file. If we
> > have the kernel name for the device, we can look up the ifindex in
> > /sys. Correct me if I'm wrong, but storing it ourselves seems
> > redundant.
> 
> But the name of a netdev can change whereas its ifindex never does.
> Identifying netdevs by name would require additional work to update the
> links when a netdev is renamed and would still be prone to race
> conditions.  This is why Narendra and Matt were proposing to store the
> ifindex in the node all along...

ah, yes - I see that now - the ability to rename an interface is what
prevents this from working. Thanks for the explanation.
-- 
dann frazier

Re: PATCH: Network Device Naming mechanism and policy

[dann frazier]

On Fri, Oct 16, 2009 at 04:33:13PM +0100, Ben Hutchings wrote:
> On Fri, 2009-10-16 at 09:20 -0600, dann frazier wrote:
> > On Fri, Oct 16, 2009 at 07:32:50PM +0530, Narendra_K@Dell.com wrote:
> [...]
> > > And how would the regular file look like in terms of holding ifindex of
> > > the interface, which can be passed to libnetdevname.
> > 
> > I can't think of anything we need to store in the regular file. If we
> > have the kernel name for the device, we can look up the ifindex in
> > /sys. Correct me if I'm wrong, but storing it ourselves seems
> > redundant.
> 
> But the name of a netdev can change whereas its ifindex never does.
> Identifying netdevs by name would require additional work to update the
> links when a netdev is renamed and would still be prone to race
> conditions.  This is why Narendra and Matt were proposing to store the
> ifindex in the node all along...

Matt, Ben and I talked about a few other possibilities on IRC.
The one I like the most at the moment is an idea Ben had to creat
dummy files named after the ifindex. Then, use symlinks for the kernel
name and the various by-$property subdirectories. This means the KOBJ
events will need to expose the ifindex.

I'm a novice at net programming, but I'm told that ifindex is
the information apps ultimately require here.

-- 
dann frazier

Re: PATCH: Network Device Naming mechanism and policy

[dann frazier]

On Fri, Oct 16, 2009 at 04:33:13PM +0100, Ben Hutchings wrote:
> On Fri, 2009-10-16 at 09:20 -0600, dann frazier wrote:
> > On Fri, Oct 16, 2009 at 07:32:50PM +0530, Narendra_K@Dell.com wrote:
> [...]
> > > And how would the regular file look like in terms of holding ifindex of
> > > the interface, which can be passed to libnetdevname.
> > 
> > I can't think of anything we need to store in the regular file. If we
> > have the kernel name for the device, we can look up the ifindex in
> > /sys. Correct me if I'm wrong, but storing it ourselves seems
> > redundant.
> 
> But the name of a netdev can change whereas its ifindex never does.
> Identifying netdevs by name would require additional work to update the
> links when a netdev is renamed and would still be prone to race
> conditions.  This is why Narendra and Matt were proposing to store the
> ifindex in the node all along...

Matt, Ben and I talked about a few other possibilities on IRC.
The one I like the most at the moment is an idea Ben had to creat
dummy files named after the ifindex. Then, use symlinks for the kernel
name and the various by-$property subdirectories. This means the KOBJ
events will need to expose the ifindex.

I'm a novice at net programming, but I'm told that ifindex is
the information apps ultimately require here.

-- 
dann frazier

RE: PATCH: Network Device Naming mechanism and policy

[Narendra_K]

>> > > And how would the regular file look like in terms of holding 
>> > > ifindex of the interface, which can be passed to libnetdevname.
>> > 
>> > I can't think of anything we need to store in the regular file. If 
>> > we have the kernel name for the device, we can look up the ifindex 
>> > in /sys. Correct me if I'm wrong, but storing it ourselves seems 
>> > redundant.
>> 
>> But the name of a netdev can change whereas its ifindex never does.
>> Identifying netdevs by name would require additional work to update 
>> the links when a netdev is renamed and would still be prone to race 
>> conditions.  This is why Narendra and Matt were proposing to 
>store the 
>> ifindex in the node all along...
>
>Matt, Ben and I talked about a few other possibilities on IRC.
>The one I like the most at the moment is an idea Ben had to 
>creat dummy files named after the ifindex. Then, use symlinks 
>for the kernel name and the various by-$property 
>subdirectories. This means the KOBJ events will need to expose 
>the ifindex.
>

I suppose the KOBJ events already expose the ifindex of a network
interface. The file "/sys/class/net/ethN/uevent" contains INTERFACE=ethN
and IFINDEX=n already. But it looks like udev doesn't use it in any way.
For example, with the kernel patch the "/sys/class/net/ethN/uevent"
contains in addition to the above details, MAJOR=M and MINOR=m which the
udev knows how to make use of with a rule like 

SUBSYSTEM=="net", KERNEL!="tun", NAME="netdev/%k", MODE="0600".

>I'm a novice at net programming, but I'm told that ifindex is 
>the information apps ultimately require here.

Yes. The minor number of the device node is retreived by libnetdevname
by "stat"ing the pathname which happens to be ifindex of the device and
it is mapped to corresponding kernel name by "if_indextoname"  call.

With regards,
Narendra K  

RE: PATCH: Network Device Naming mechanism and policy

[Narendra_K]

>> > > And how would the regular file look like in terms of holding 
>> > > ifindex of the interface, which can be passed to libnetdevname.
>> > 
>> > I can't think of anything we need to store in the regular file. If 
>> > we have the kernel name for the device, we can look up the ifindex 
>> > in /sys. Correct me if I'm wrong, but storing it ourselves seems 
>> > redundant.
>> 
>> But the name of a netdev can change whereas its ifindex never does.
>> Identifying netdevs by name would require additional work to update 
>> the links when a netdev is renamed and would still be prone to race 
>> conditions.  This is why Narendra and Matt were proposing to 
>store the 
>> ifindex in the node all along...
>
>Matt, Ben and I talked about a few other possibilities on IRC.
>The one I like the most at the moment is an idea Ben had to 
>creat dummy files named after the ifindex. Then, use symlinks 
>for the kernel name and the various by-$property 
>subdirectories. This means the KOBJ events will need to expose 
>the ifindex.
>

I suppose the KOBJ events already expose the ifindex of a network
interface. The file "/sys/class/net/ethN/uevent" contains INTERFACE=ethN
and IFINDEX=n already. But it looks like udev doesn't use it in any way.
For example, with the kernel patch the "/sys/class/net/ethN/uevent"
contains in addition to the above details, MAJOR=M and MINOR=m which the
udev knows how to make use of with a rule like 

SUBSYSTEM="net", KERNEL!="tun", NAME="netdev/%k", MODE="0600".

>I'm a novice at net programming, but I'm told that ifindex is 
>the information apps ultimately require here.

Yes. The minor number of the device node is retreived by libnetdevname
by "stat"ing the pathname which happens to be ifindex of the device and
it is mapped to corresponding kernel name by "if_indextoname"  call.

With regards,
Narendra K  

Re: PATCH: Network Device Naming mechanism and policy

[Bryan Kadzban]

[-- Attachment #1: Type: text/plain, Size: 2371 bytes --]

Narendra_K@Dell.com wrote:
>>>>> And how would the regular file look like in terms of holding
>>>>>  ifindex of the interface, which can be passed to
>>>>> libnetdevname.
>>>> I can't think of anything we need to store in the regular file.
>>>> If we have the kernel name for the device, we can look up the
>>>> ifindex in /sys. Correct me if I'm wrong, but storing it
>>>> ourselves seems redundant.
>>> But the name of a netdev can change whereas its ifindex never
>>> does. Identifying netdevs by name would require additional work
>>> to update the links when a netdev is renamed and would still be
>>> prone to race conditions.  This is why Narendra and Matt were
>>> proposing to
>> store the
>>> ifindex in the node all along...
>> Matt, Ben and I talked about a few other possibilities on IRC. The
>> one I like the most at the moment is an idea Ben had to creat dummy
>> files named after the ifindex. Then, use symlinks for the kernel
>> name and the various by-$property subdirectories. This means the
>> KOBJ events will need to expose the ifindex.
>> 
> 
> I suppose the KOBJ events already expose the ifindex of a network 
> interface. The file "/sys/class/net/ethN/uevent" contains
> INTERFACE=ethN and IFINDEX=n already. But it looks like udev doesn't
> use it in any way.

Right; it could simply do the equivalent of:

touch /dev/netdev/$env{IFINDEX}

instead of its normal mknod(2), and then do normal SYMLINK processing.
That last part is what would link /dev/netdev/by-name/$env{INTERFACE} to
that device, along with /dev/netdev/by-mac/*, /dev/netdev/by-path/*,
etc., etc., in as many different ways as people want to add rules.

(Or /dev/net/by-* instead of netdev; I'm mostly ambivalent about the
first-level directory under /dev.  Looks like libnetdevname requires
/dev/netdev though.)

> For example, with the kernel patch the "/sys/class/net/ethN/uevent" 
> contains in addition to the above details, MAJOR=M and MINOR=m which
> the udev knows how to make use of with a rule like
> 
> SUBSYSTEM=="net", KERNEL!="tun", NAME="netdev/%k", MODE="0600".

And if the only point is to get the ifindex via stat(2) on the resulting
symlinks, but people don't like device files, then why not get the
ifindex via readlink(2) (and a bit of string parsing, and a strtol(3) or
strtoul(3) call) instead?  :-)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 260 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[Bryan Kadzban]

[-- Attachment #1: Type: text/plain, Size: 2371 bytes --]

Narendra_K@Dell.com wrote:
>>>>> And how would the regular file look like in terms of holding
>>>>>  ifindex of the interface, which can be passed to
>>>>> libnetdevname.
>>>> I can't think of anything we need to store in the regular file.
>>>> If we have the kernel name for the device, we can look up the
>>>> ifindex in /sys. Correct me if I'm wrong, but storing it
>>>> ourselves seems redundant.
>>> But the name of a netdev can change whereas its ifindex never
>>> does. Identifying netdevs by name would require additional work
>>> to update the links when a netdev is renamed and would still be
>>> prone to race conditions.  This is why Narendra and Matt were
>>> proposing to
>> store the
>>> ifindex in the node all along...
>> Matt, Ben and I talked about a few other possibilities on IRC. The
>> one I like the most at the moment is an idea Ben had to creat dummy
>> files named after the ifindex. Then, use symlinks for the kernel
>> name and the various by-$property subdirectories. This means the
>> KOBJ events will need to expose the ifindex.
>> 
> 
> I suppose the KOBJ events already expose the ifindex of a network 
> interface. The file "/sys/class/net/ethN/uevent" contains
> INTERFACE=ethN and IFINDEX=n already. But it looks like udev doesn't
> use it in any way.

Right; it could simply do the equivalent of:

touch /dev/netdev/$env{IFINDEX}

instead of its normal mknod(2), and then do normal SYMLINK processing.
That last part is what would link /dev/netdev/by-name/$env{INTERFACE} to
that device, along with /dev/netdev/by-mac/*, /dev/netdev/by-path/*,
etc., etc., in as many different ways as people want to add rules.

(Or /dev/net/by-* instead of netdev; I'm mostly ambivalent about the
first-level directory under /dev.  Looks like libnetdevname requires
/dev/netdev though.)

> For example, with the kernel patch the "/sys/class/net/ethN/uevent" 
> contains in addition to the above details, MAJOR=M and MINOR=m which
> the udev knows how to make use of with a rule like
> 
> SUBSYSTEM=="net", KERNEL!="tun", NAME="netdev/%k", MODE="0600".

And if the only point is to get the ifindex via stat(2) on the resulting
symlinks, but people don't like device files, then why not get the
ifindex via readlink(2) (and a bit of string parsing, and a strtol(3) or
strtoul(3) call) instead?  :-)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 260 bytes --]

[PATCH] udev: create empty regular files to represent net interfaces

[dann frazier]

Here's a proof of concept to further the discussion..

The default filename uses the format:
  /dev/netdev/by-ifindex/$ifindex

This provides the infrastructure to permit udev rules to create aliases for
network devices using symlinks, for example:

  /dev/netdev/by-name/eth0 -> ../by-ifindex/1
  /dev/netdev/by-biosname/LOM0 -> ../by-ifindex/3

A library (such as the proposed libnetdevname) could use this information
to provide an alias->realname mapping for network utilities.

Tested with the following rule:

SUBSYSTEM=="net", PROGRAM=="/usr/local/bin/ifindex2name $attr{ifindex}", SYMLINK+="netdev/by-name/%c"

$ cat /usr/local/bin/ifindex2name
#!/bin/sh

set -e

ifindex="$1"

for d in /sys/class/net/*; do
    testindex="$(cat $d/ifindex)"
    if [ "$ifindex" = "$testindex" ]; then
	echo "$(basename $d)"
	exit 0
    fi
done

exit 1

---
 libudev/exported_symbols |    1 +
 libudev/libudev.c        |   29 ++++++++++++++++
 libudev/libudev.h        |    1 +
 udev/udev-event.c        |   82 ++++++++++++++++++++--------------------------
 udev/udev-node.c         |   41 ++++++++++++++++++++---
 udev/udev-rules.c        |    3 +-
 6 files changed, 105 insertions(+), 52 deletions(-)

diff --git a/libudev/exported_symbols b/libudev/exported_symbols
index 018463d..31c616a 100644
--- a/libudev/exported_symbols
+++ b/libudev/exported_symbols
@@ -8,6 +8,7 @@ udev_get_userdata
 udev_set_userdata
 udev_get_sys_path
 udev_get_dev_path
+udev_get_netdev_path
 udev_list_entry_get_next
 udev_list_entry_get_by_name
 udev_list_entry_get_name
diff --git a/libudev/libudev.c b/libudev/libudev.c
index 1909138..2a83417 100644
--- a/libudev/libudev.c
+++ b/libudev/libudev.c
@@ -42,6 +42,7 @@ struct udev {
 	void *userdata;
 	char *sys_path;
 	char *dev_path;
+	char *netdev_path;
 	char *rules_path;
 	struct udev_list_node properties_list;
 	int log_priority;
@@ -125,8 +126,10 @@ struct udev *udev_new(void)
 	udev->run = 1;
 	udev->dev_path = strdup("/dev");
 	udev->sys_path = strdup("/sys");
+	udev->netdev_path = strdup("/dev/netdev/by-ifindex");
 	config_file = strdup(SYSCONFDIR "/udev/udev.conf");
 	if (udev->dev_path == NULL ||
+	    udev->netdev_path == NULL ||
 	    udev->sys_path == NULL ||
 	    config_file == NULL)
 		goto err;
@@ -243,6 +246,14 @@ struct udev *udev_new(void)
 		udev_add_property(udev, "UDEV_ROOT", udev->dev_path);
 	}
 
+	env = getenv("NETDEV_ROOT");
+	if (env != NULL) {
+		free(udev->netdev_path);
+		udev->netdev_path = strdup(env);
+		util_remove_trailing_chars(udev->netdev_path, '/');
+		udev_add_property(udev, "NETDEV_ROOT", udev->netdev_path);
+	}
+
 	env = getenv("UDEV_LOG");
 	if (env != NULL)
 		udev_set_log_priority(udev, util_log_priority(env));
@@ -253,6 +264,7 @@ struct udev *udev_new(void)
 	dbg(udev, "log_priority=%d\n", udev->log_priority);
 	dbg(udev, "config_file='%s'\n", config_file);
 	dbg(udev, "dev_path='%s'\n", udev->dev_path);
+	dbg(udev, "netdev_path='%s'\n", udev->netdev_path);
 	dbg(udev, "sys_path='%s'\n", udev->sys_path);
 	if (udev->rules_path != NULL)
 		dbg(udev, "rules_path='%s'\n", udev->rules_path);
@@ -398,6 +410,23 @@ const char *udev_get_dev_path(struct udev *udev)
 	return udev->dev_path;
 }
 
+/**
+ * udev_get_netdev_path:
+ * @udev: udev library context
+ *
+ * Retrieve the device directory path. The default value is "/etc/udev/net",
+ * the actual value may be overridden in the udev configuration
+ * file.
+ *
+ * Returns: the device directory path
+ **/
+const char *udev_get_netdev_path(struct udev *udev)
+{
+	if (udev == NULL)
+		return NULL;
+	return udev->netdev_path;
+}
+
 struct udev_list_entry *udev_add_property(struct udev *udev, const char *key, const char *value)
 {
 	if (value == NULL) {
diff --git a/libudev/libudev.h b/libudev/libudev.h
index 4bcf442..5834781 100644
--- a/libudev/libudev.h
+++ b/libudev/libudev.h
@@ -77,6 +77,7 @@ struct udev_device *udev_device_get_parent_with_subsystem_devtype(struct udev_de
 								  const char *subsystem, const char *devtype);
 /* retrieve device properties */
 const char *udev_device_get_devpath(struct udev_device *udev_device);
+const char *udev_device_get_netdevpath(struct udev_device *udev_device);
 const char *udev_device_get_subsystem(struct udev_device *udev_device);
 const char *udev_device_get_devtype(struct udev_device *udev_device);
 const char *udev_device_get_syspath(struct udev_device *udev_device);
diff --git a/udev/udev-event.c b/udev/udev-event.c
index d5b4d09..953f87a 100644
--- a/udev/udev-event.c
+++ b/udev/udev-event.c
@@ -542,7 +542,7 @@ int udev_event_execute_rules(struct udev_event *event, struct udev_rules *rules)
 	}
 
 	/* add device node */
-	if (major(udev_device_get_devnum(dev)) != 0 &&
+	if ((major(udev_device_get_devnum(dev)) != 0 || strcmp(udev_device_get_subsystem(dev), "net") == 0) &&
 	    (strcmp(udev_device_get_action(dev), "add") == 0 || strcmp(udev_device_get_action(dev), "change") == 0)) {
 		char filename[UTIL_PATH_SIZE];
 		struct udev_device *dev_old;
@@ -603,10 +603,38 @@ int udev_event_execute_rules(struct udev_event *event, struct udev_rules *rules)
 			goto exit_add;
 		}
 
-		/* set device node name */
-		util_strscpyl(filename, sizeof(filename), udev_get_dev_path(event->udev), "/", event->name, NULL);
-		udev_device_set_devnode(dev, filename);
-
+		/* add netif */
+		if (strcmp(udev_device_get_subsystem(dev), "net") == 0 &&
+		    strcmp(udev_device_get_action(dev), "add") == 0) {
+			char syspath[UTIL_PATH_SIZE];
+			info(event->udev, "netif add '%s'\n", udev_device_get_devpath(dev));
+			/* look if we want to change the name of the netif */
+			if (strcmp(event->name, udev_device_get_sysname(dev)) != 0) {
+				char *pos;
+				err = rename_netif(event);
+				if (err != 0)
+					goto exit;
+				info(event->udev, "renamed netif to '%s'\n", event->name);
+				
+				/* remember old name */
+				udev_device_add_property(dev, "INTERFACE_OLD", udev_device_get_sysname(dev));
+				
+				/* now change the devpath, because the kernel device name has changed */
+				util_strscpy(syspath, sizeof(syspath), udev_device_get_syspath(dev));
+				pos = strrchr(syspath, '/');
+				if (pos != NULL) {
+					pos++;
+					util_strscpy(pos, sizeof(syspath) - (pos - syspath), event->name);
+					udev_device_set_syspath(event->dev, syspath);
+					udev_device_add_property(dev, "INTERFACE", udev_device_get_sysname(dev));
+					info(event->udev, "changed devpath to '%s'\n", udev_device_get_devpath(dev));
+				}
+			}
+			snprintf(syspath, sizeof(syspath), "%s/%s", udev_get_netdev_path(event->udev),
+				 udev_device_get_property_value(event->dev, "IFINDEX"));
+			udev_device_set_devnode(dev, syspath);
+		}
+		    
 		/* write current database entry */
 		udev_device_update_db(dev);
 
@@ -632,49 +660,11 @@ exit_add:
 		goto exit;
 	}
 
-	/* add netif */
-	if (strcmp(udev_device_get_subsystem(dev), "net") == 0 && strcmp(udev_device_get_action(dev), "add") == 0) {
-		dbg(event->udev, "netif add '%s'\n", udev_device_get_devpath(dev));
-		udev_device_delete_db(dev);
-
-		udev_rules_apply_to_event(rules, event);
-		if (event->ignore_device) {
-			info(event->udev, "device event will be ignored\n");
-			goto exit;
-		}
-		if (event->name == NULL)
-			goto exit;
-
-		/* look if we want to change the name of the netif */
-		if (strcmp(event->name, udev_device_get_sysname(dev)) != 0) {
-			char syspath[UTIL_PATH_SIZE];
-			char *pos;
-
-			err = rename_netif(event);
-			if (err != 0)
-				goto exit;
-			info(event->udev, "renamed netif to '%s'\n", event->name);
-
-			/* remember old name */
-			udev_device_add_property(dev, "INTERFACE_OLD", udev_device_get_sysname(dev));
-
-			/* now change the devpath, because the kernel device name has changed */
-			util_strscpy(syspath, sizeof(syspath), udev_device_get_syspath(dev));
-			pos = strrchr(syspath, '/');
-			if (pos != NULL) {
-				pos++;
-				util_strscpy(pos, sizeof(syspath) - (pos - syspath), event->name);
-				udev_device_set_syspath(event->dev, syspath);
-				udev_device_add_property(dev, "INTERFACE", udev_device_get_sysname(dev));
-				info(event->udev, "changed devpath to '%s'\n", udev_device_get_devpath(dev));
-			}
-		}
-		udev_device_update_db(dev);
-		goto exit;
-	}
 
 	/* remove device node */
-	if (major(udev_device_get_devnum(dev)) != 0 && strcmp(udev_device_get_action(dev), "remove") == 0) {
+	if ((major(udev_device_get_devnum(dev)) != 0 ||
+	     strcmp(udev_device_get_subsystem(dev), "net") == 0) &&
+	    strcmp(udev_device_get_action(dev), "remove") == 0) {
 		/* import database entry and delete it */
 		udev_device_read_db(dev);
 		udev_device_set_info_loaded(dev);
diff --git a/udev/udev-node.c b/udev/udev-node.c
index 39bec3e..da96a4a 100644
--- a/udev/udev-node.c
+++ b/udev/udev-node.c
@@ -32,6 +32,34 @@
 
 #define TMP_FILE_EXT		".udev-tmp"
 
+static bool udev_node_mode_matches(struct stat *stats, dev_t devnum, mode_t mode)
+{
+	if ((stats->st_mode & S_IFMT) != (mode & S_IFMT))
+		return false;
+
+	if ((S_ISCHR(mode) || S_ISBLK(mode)) && (stats->st_rdev != devnum))
+		return false;
+
+	return true;
+}
+
+static int udev_node_create_file(struct udev *udev, const char *path, dev_t devnum, mode_t mode)
+{
+	int fd, ret = 0;
+
+	if (S_ISCHR(mode) || S_ISBLK(mode))
+		ret = mknod(path, mode, devnum);
+	else {
+		fd = creat(path, mode);
+		if (fd < 0)
+			ret = fd;
+		else
+			close(fd);
+	}
+
+	return ret;
+}
+
 int udev_node_mknod(struct udev_device *dev, const char *file, dev_t devnum, mode_t mode, uid_t uid, gid_t gid)
 {
 	struct udev *udev = udev_device_get_udev(dev);
@@ -47,12 +75,15 @@ int udev_node_mknod(struct udev_device *dev, const char *file, dev_t devnum, mod
 	else
 		mode |= S_IFCHR;
 
+	if (strcmp(udev_device_get_subsystem(dev), "net") == 0)
+		mode = S_IFREG | S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH;
+
 	if (file == NULL)
 		file = udev_device_get_devnode(dev);
 
 	if (lstat(file, &stats) == 0) {
-		if (((stats.st_mode & S_IFMT) == (mode & S_IFMT)) && (stats.st_rdev == devnum)) {
-			info(udev, "preserve file '%s', because it has correct dev_t\n", file);
+		if (udev_node_mode_matches(&stats, devnum, mode)) {
+			info(udev, "preserve file '%s', because it has correct type\n", file);
 			preserve = 1;
 			udev_selinux_lsetfilecon(udev, file, mode);
 		} else {
@@ -62,10 +93,10 @@ int udev_node_mknod(struct udev_device *dev, const char *file, dev_t devnum, mod
 			util_strscpyl(file_tmp, sizeof(file_tmp), file, TMP_FILE_EXT, NULL);
 			unlink(file_tmp);
 			udev_selinux_setfscreatecon(udev, file_tmp, mode);
-			err = mknod(file_tmp, mode, devnum);
+			err = udev_node_create_file(udev, file_tmp, devnum, mode);
 			udev_selinux_resetfscreatecon(udev);
 			if (err != 0) {
-				err(udev, "mknod(%s, %#o, %u, %u) failed: %m\n",
+				err(udev, "udev_node_create_file(%s, %#o, %u, %u) failed: %m\n",
 				    file_tmp, mode, major(devnum), minor(devnum));
 				goto exit;
 			}
@@ -80,7 +111,7 @@ int udev_node_mknod(struct udev_device *dev, const char *file, dev_t devnum, mod
 		do {
 			util_create_path(udev, file);
 			udev_selinux_setfscreatecon(udev, file, mode);
-			err = mknod(file, mode, devnum);
+			err = udev_node_create_file(udev, file, devnum, mode);
 			if (err != 0)
 				err = errno;
 			udev_selinux_resetfscreatecon(udev);
diff --git a/udev/udev-rules.c b/udev/udev-rules.c
index ddb51de..a1fe991 100644
--- a/udev/udev-rules.c
+++ b/udev/udev-rules.c
@@ -2435,7 +2435,8 @@ int udev_rules_apply_to_event(struct udev_rules *rules, struct udev_event *event
 
 				if (event->devlink_final)
 					break;
-				if (major(udev_device_get_devnum(event->dev)) == 0)
+				if ((major(udev_device_get_devnum(event->dev)) == 0) &&
+				    (strcmp(udev_device_get_subsystem(event->dev), "net") != 0))
 					break;
 				if (cur->key.op == OP_ASSIGN_FINAL)
 					event->devlink_final = 1;
-- 
1.6.5

[PATCH] udev: create empty regular files to represent net

[dann frazier]

Here's a proof of concept to further the discussion..

The default filename uses the format:
  /dev/netdev/by-ifindex/$ifindex

This provides the infrastructure to permit udev rules to create aliases for
network devices using symlinks, for example:

  /dev/netdev/by-name/eth0 -> ../by-ifindex/1
  /dev/netdev/by-biosname/LOM0 -> ../by-ifindex/3

A library (such as the proposed libnetdevname) could use this information
to provide an alias->realname mapping for network utilities.

Tested with the following rule:

SUBSYSTEM="net", PROGRAM="/usr/local/bin/ifindex2name $attr{ifindex}", SYMLINK+="netdev/by-name/%c"

$ cat /usr/local/bin/ifindex2name
#!/bin/sh

set -e

ifindex="$1"

for d in /sys/class/net/*; do
    testindex="$(cat $d/ifindex)"
    if [ "$ifindex" = "$testindex" ]; then
	echo "$(basename $d)"
	exit 0
    fi
done

exit 1

---
 libudev/exported_symbols |    1 +
 libudev/libudev.c        |   29 ++++++++++++++++
 libudev/libudev.h        |    1 +
 udev/udev-event.c        |   82 ++++++++++++++++++++--------------------------
 udev/udev-node.c         |   41 ++++++++++++++++++++---
 udev/udev-rules.c        |    3 +-
 6 files changed, 105 insertions(+), 52 deletions(-)

diff --git a/libudev/exported_symbols b/libudev/exported_symbols
index 018463d..31c616a 100644
--- a/libudev/exported_symbols
+++ b/libudev/exported_symbols
@@ -8,6 +8,7 @@ udev_get_userdata
 udev_set_userdata
 udev_get_sys_path
 udev_get_dev_path
+udev_get_netdev_path
 udev_list_entry_get_next
 udev_list_entry_get_by_name
 udev_list_entry_get_name
diff --git a/libudev/libudev.c b/libudev/libudev.c
index 1909138..2a83417 100644
--- a/libudev/libudev.c
+++ b/libudev/libudev.c
@@ -42,6 +42,7 @@ struct udev {
 	void *userdata;
 	char *sys_path;
 	char *dev_path;
+	char *netdev_path;
 	char *rules_path;
 	struct udev_list_node properties_list;
 	int log_priority;
@@ -125,8 +126,10 @@ struct udev *udev_new(void)
 	udev->run = 1;
 	udev->dev_path = strdup("/dev");
 	udev->sys_path = strdup("/sys");
+	udev->netdev_path = strdup("/dev/netdev/by-ifindex");
 	config_file = strdup(SYSCONFDIR "/udev/udev.conf");
 	if (udev->dev_path = NULL ||
+	    udev->netdev_path = NULL ||
 	    udev->sys_path = NULL ||
 	    config_file = NULL)
 		goto err;
@@ -243,6 +246,14 @@ struct udev *udev_new(void)
 		udev_add_property(udev, "UDEV_ROOT", udev->dev_path);
 	}
 
+	env = getenv("NETDEV_ROOT");
+	if (env != NULL) {
+		free(udev->netdev_path);
+		udev->netdev_path = strdup(env);
+		util_remove_trailing_chars(udev->netdev_path, '/');
+		udev_add_property(udev, "NETDEV_ROOT", udev->netdev_path);
+	}
+
 	env = getenv("UDEV_LOG");
 	if (env != NULL)
 		udev_set_log_priority(udev, util_log_priority(env));
@@ -253,6 +264,7 @@ struct udev *udev_new(void)
 	dbg(udev, "log_priority=%d\n", udev->log_priority);
 	dbg(udev, "config_file='%s'\n", config_file);
 	dbg(udev, "dev_path='%s'\n", udev->dev_path);
+	dbg(udev, "netdev_path='%s'\n", udev->netdev_path);
 	dbg(udev, "sys_path='%s'\n", udev->sys_path);
 	if (udev->rules_path != NULL)
 		dbg(udev, "rules_path='%s'\n", udev->rules_path);
@@ -398,6 +410,23 @@ const char *udev_get_dev_path(struct udev *udev)
 	return udev->dev_path;
 }
 
+/**
+ * udev_get_netdev_path:
+ * @udev: udev library context
+ *
+ * Retrieve the device directory path. The default value is "/etc/udev/net",
+ * the actual value may be overridden in the udev configuration
+ * file.
+ *
+ * Returns: the device directory path
+ **/
+const char *udev_get_netdev_path(struct udev *udev)
+{
+	if (udev = NULL)
+		return NULL;
+	return udev->netdev_path;
+}
+
 struct udev_list_entry *udev_add_property(struct udev *udev, const char *key, const char *value)
 {
 	if (value = NULL) {
diff --git a/libudev/libudev.h b/libudev/libudev.h
index 4bcf442..5834781 100644
--- a/libudev/libudev.h
+++ b/libudev/libudev.h
@@ -77,6 +77,7 @@ struct udev_device *udev_device_get_parent_with_subsystem_devtype(struct udev_de
 								  const char *subsystem, const char *devtype);
 /* retrieve device properties */
 const char *udev_device_get_devpath(struct udev_device *udev_device);
+const char *udev_device_get_netdevpath(struct udev_device *udev_device);
 const char *udev_device_get_subsystem(struct udev_device *udev_device);
 const char *udev_device_get_devtype(struct udev_device *udev_device);
 const char *udev_device_get_syspath(struct udev_device *udev_device);
diff --git a/udev/udev-event.c b/udev/udev-event.c
index d5b4d09..953f87a 100644
--- a/udev/udev-event.c
+++ b/udev/udev-event.c
@@ -542,7 +542,7 @@ int udev_event_execute_rules(struct udev_event *event, struct udev_rules *rules)
 	}
 
 	/* add device node */
-	if (major(udev_device_get_devnum(dev)) != 0 &&
+	if ((major(udev_device_get_devnum(dev)) != 0 || strcmp(udev_device_get_subsystem(dev), "net") = 0) &&
 	    (strcmp(udev_device_get_action(dev), "add") = 0 || strcmp(udev_device_get_action(dev), "change") = 0)) {
 		char filename[UTIL_PATH_SIZE];
 		struct udev_device *dev_old;
@@ -603,10 +603,38 @@ int udev_event_execute_rules(struct udev_event *event, struct udev_rules *rules)
 			goto exit_add;
 		}
 
-		/* set device node name */
-		util_strscpyl(filename, sizeof(filename), udev_get_dev_path(event->udev), "/", event->name, NULL);
-		udev_device_set_devnode(dev, filename);
-
+		/* add netif */
+		if (strcmp(udev_device_get_subsystem(dev), "net") = 0 &&
+		    strcmp(udev_device_get_action(dev), "add") = 0) {
+			char syspath[UTIL_PATH_SIZE];
+			info(event->udev, "netif add '%s'\n", udev_device_get_devpath(dev));
+			/* look if we want to change the name of the netif */
+			if (strcmp(event->name, udev_device_get_sysname(dev)) != 0) {
+				char *pos;
+				err = rename_netif(event);
+				if (err != 0)
+					goto exit;
+				info(event->udev, "renamed netif to '%s'\n", event->name);
+				
+				/* remember old name */
+				udev_device_add_property(dev, "INTERFACE_OLD", udev_device_get_sysname(dev));
+				
+				/* now change the devpath, because the kernel device name has changed */
+				util_strscpy(syspath, sizeof(syspath), udev_device_get_syspath(dev));
+				pos = strrchr(syspath, '/');
+				if (pos != NULL) {
+					pos++;
+					util_strscpy(pos, sizeof(syspath) - (pos - syspath), event->name);
+					udev_device_set_syspath(event->dev, syspath);
+					udev_device_add_property(dev, "INTERFACE", udev_device_get_sysname(dev));
+					info(event->udev, "changed devpath to '%s'\n", udev_device_get_devpath(dev));
+				}
+			}
+			snprintf(syspath, sizeof(syspath), "%s/%s", udev_get_netdev_path(event->udev),
+				 udev_device_get_property_value(event->dev, "IFINDEX"));
+			udev_device_set_devnode(dev, syspath);
+		}
+		    
 		/* write current database entry */
 		udev_device_update_db(dev);
 
@@ -632,49 +660,11 @@ exit_add:
 		goto exit;
 	}
 
-	/* add netif */
-	if (strcmp(udev_device_get_subsystem(dev), "net") = 0 && strcmp(udev_device_get_action(dev), "add") = 0) {
-		dbg(event->udev, "netif add '%s'\n", udev_device_get_devpath(dev));
-		udev_device_delete_db(dev);
-
-		udev_rules_apply_to_event(rules, event);
-		if (event->ignore_device) {
-			info(event->udev, "device event will be ignored\n");
-			goto exit;
-		}
-		if (event->name = NULL)
-			goto exit;
-
-		/* look if we want to change the name of the netif */
-		if (strcmp(event->name, udev_device_get_sysname(dev)) != 0) {
-			char syspath[UTIL_PATH_SIZE];
-			char *pos;
-
-			err = rename_netif(event);
-			if (err != 0)
-				goto exit;
-			info(event->udev, "renamed netif to '%s'\n", event->name);
-
-			/* remember old name */
-			udev_device_add_property(dev, "INTERFACE_OLD", udev_device_get_sysname(dev));
-
-			/* now change the devpath, because the kernel device name has changed */
-			util_strscpy(syspath, sizeof(syspath), udev_device_get_syspath(dev));
-			pos = strrchr(syspath, '/');
-			if (pos != NULL) {
-				pos++;
-				util_strscpy(pos, sizeof(syspath) - (pos - syspath), event->name);
-				udev_device_set_syspath(event->dev, syspath);
-				udev_device_add_property(dev, "INTERFACE", udev_device_get_sysname(dev));
-				info(event->udev, "changed devpath to '%s'\n", udev_device_get_devpath(dev));
-			}
-		}
-		udev_device_update_db(dev);
-		goto exit;
-	}
 
 	/* remove device node */
-	if (major(udev_device_get_devnum(dev)) != 0 && strcmp(udev_device_get_action(dev), "remove") = 0) {
+	if ((major(udev_device_get_devnum(dev)) != 0 ||
+	     strcmp(udev_device_get_subsystem(dev), "net") = 0) &&
+	    strcmp(udev_device_get_action(dev), "remove") = 0) {
 		/* import database entry and delete it */
 		udev_device_read_db(dev);
 		udev_device_set_info_loaded(dev);
diff --git a/udev/udev-node.c b/udev/udev-node.c
index 39bec3e..da96a4a 100644
--- a/udev/udev-node.c
+++ b/udev/udev-node.c
@@ -32,6 +32,34 @@
 
 #define TMP_FILE_EXT		".udev-tmp"
 
+static bool udev_node_mode_matches(struct stat *stats, dev_t devnum, mode_t mode)
+{
+	if ((stats->st_mode & S_IFMT) != (mode & S_IFMT))
+		return false;
+
+	if ((S_ISCHR(mode) || S_ISBLK(mode)) && (stats->st_rdev != devnum))
+		return false;
+
+	return true;
+}
+
+static int udev_node_create_file(struct udev *udev, const char *path, dev_t devnum, mode_t mode)
+{
+	int fd, ret = 0;
+
+	if (S_ISCHR(mode) || S_ISBLK(mode))
+		ret = mknod(path, mode, devnum);
+	else {
+		fd = creat(path, mode);
+		if (fd < 0)
+			ret = fd;
+		else
+			close(fd);
+	}
+
+	return ret;
+}
+
 int udev_node_mknod(struct udev_device *dev, const char *file, dev_t devnum, mode_t mode, uid_t uid, gid_t gid)
 {
 	struct udev *udev = udev_device_get_udev(dev);
@@ -47,12 +75,15 @@ int udev_node_mknod(struct udev_device *dev, const char *file, dev_t devnum, mod
 	else
 		mode |= S_IFCHR;
 
+	if (strcmp(udev_device_get_subsystem(dev), "net") = 0)
+		mode = S_IFREG | S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH;
+
 	if (file = NULL)
 		file = udev_device_get_devnode(dev);
 
 	if (lstat(file, &stats) = 0) {
-		if (((stats.st_mode & S_IFMT) = (mode & S_IFMT)) && (stats.st_rdev = devnum)) {
-			info(udev, "preserve file '%s', because it has correct dev_t\n", file);
+		if (udev_node_mode_matches(&stats, devnum, mode)) {
+			info(udev, "preserve file '%s', because it has correct type\n", file);
 			preserve = 1;
 			udev_selinux_lsetfilecon(udev, file, mode);
 		} else {
@@ -62,10 +93,10 @@ int udev_node_mknod(struct udev_device *dev, const char *file, dev_t devnum, mod
 			util_strscpyl(file_tmp, sizeof(file_tmp), file, TMP_FILE_EXT, NULL);
 			unlink(file_tmp);
 			udev_selinux_setfscreatecon(udev, file_tmp, mode);
-			err = mknod(file_tmp, mode, devnum);
+			err = udev_node_create_file(udev, file_tmp, devnum, mode);
 			udev_selinux_resetfscreatecon(udev);
 			if (err != 0) {
-				err(udev, "mknod(%s, %#o, %u, %u) failed: %m\n",
+				err(udev, "udev_node_create_file(%s, %#o, %u, %u) failed: %m\n",
 				    file_tmp, mode, major(devnum), minor(devnum));
 				goto exit;
 			}
@@ -80,7 +111,7 @@ int udev_node_mknod(struct udev_device *dev, const char *file, dev_t devnum, mod
 		do {
 			util_create_path(udev, file);
 			udev_selinux_setfscreatecon(udev, file, mode);
-			err = mknod(file, mode, devnum);
+			err = udev_node_create_file(udev, file, devnum, mode);
 			if (err != 0)
 				err = errno;
 			udev_selinux_resetfscreatecon(udev);
diff --git a/udev/udev-rules.c b/udev/udev-rules.c
index ddb51de..a1fe991 100644
--- a/udev/udev-rules.c
+++ b/udev/udev-rules.c
@@ -2435,7 +2435,8 @@ int udev_rules_apply_to_event(struct udev_rules *rules, struct udev_event *event
 
 				if (event->devlink_final)
 					break;
-				if (major(udev_device_get_devnum(event->dev)) = 0)
+				if ((major(udev_device_get_devnum(event->dev)) = 0) &&
+				    (strcmp(udev_device_get_subsystem(event->dev), "net") != 0))
 					break;
 				if (cur->key.op = OP_ASSIGN_FINAL)
 					event->devlink_final = 1;
-- 
1.6.5

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Matt Domsch]

On Thu, Oct 22, 2009 at 12:36:20AM -0600, dann frazier wrote:
> Here's a proof of concept to further the discussion..
> 
> The default filename uses the format:
>   /dev/netdev/by-ifindex/$ifindex
> 
> This provides the infrastructure to permit udev rules to create aliases for
> network devices using symlinks, for example:
> 
>   /dev/netdev/by-name/eth0 -> ../by-ifindex/1
>   /dev/netdev/by-biosname/LOM0 -> ../by-ifindex/3
> 
> A library (such as the proposed libnetdevname) could use this information
> to provide an alias->realname mapping for network utilities.

yes, this could work, as IFINDEX is already exported in the uevents,
and that's the primary value udev needs to set up the mapping.

While I like the little ifindex2name script you've got, I think udev
could simply call if_indextoname() to get this, and not call an
external program?  I suppose it could be a really really simple
external program too.

I'd be fine with this approach.  It has the advantages of not
requiring a kernel change at all, and not creating a whole character
device which would be useless.  And it doesn't preclude someone in the
future from creating a char device for network devices should they so
choose.

Kay, what say you as udev owner?

Thanks,
Matt

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Matt Domsch]

On Thu, Oct 22, 2009 at 12:36:20AM -0600, dann frazier wrote:
> Here's a proof of concept to further the discussion..
> 
> The default filename uses the format:
>   /dev/netdev/by-ifindex/$ifindex
> 
> This provides the infrastructure to permit udev rules to create aliases for
> network devices using symlinks, for example:
> 
>   /dev/netdev/by-name/eth0 -> ../by-ifindex/1
>   /dev/netdev/by-biosname/LOM0 -> ../by-ifindex/3
> 
> A library (such as the proposed libnetdevname) could use this information
> to provide an alias->realname mapping for network utilities.

yes, this could work, as IFINDEX is already exported in the uevents,
and that's the primary value udev needs to set up the mapping.

While I like the little ifindex2name script you've got, I think udev
could simply call if_indextoname() to get this, and not call an
external program?  I suppose it could be a really really simple
external program too.

I'd be fine with this approach.  It has the advantages of not
requiring a kernel change at all, and not creating a whole character
device which would be useless.  And it doesn't preclude someone in the
future from creating a char device for network devices should they so
choose.

Kay, what say you as udev owner?

Thanks,
Matt

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Kay Sievers]

On Tue, Oct 27, 2009 at 21:55, Matt Domsch <Matt_Domsch@dell.com> wrote:
> On Thu, Oct 22, 2009 at 12:36:20AM -0600, dann frazier wrote:
>> Here's a proof of concept to further the discussion..
>>
>> The default filename uses the format:
>>   /dev/netdev/by-ifindex/$ifindex
>>
>> This provides the infrastructure to permit udev rules to create aliases for
>> network devices using symlinks, for example:
>>
>>   /dev/netdev/by-name/eth0 -> ../by-ifindex/1
>>   /dev/netdev/by-biosname/LOM0 -> ../by-ifindex/3
>>
>> A library (such as the proposed libnetdevname) could use this information
>> to provide an alias->realname mapping for network utilities.
>
> yes, this could work, as IFINDEX is already exported in the uevents,
> and that's the primary value udev needs to set up the mapping.
>
> While I like the little ifindex2name script you've got, I think udev
> could simply call if_indextoname() to get this, and not call an
> external program?  I suppose it could be a really really simple
> external program too.

What's the point of all this? Why would udev ever need to find the
name of a device by the ifindex? The device name is the primary value
for the kernel events udev acts on.

> I'd be fine with this approach.  It has the advantages of not
> requiring a kernel change at all, and not creating a whole character
> device which would be useless.  And it doesn't preclude someone in the
> future from creating a char device for network devices should they so
> choose.
>
> Kay, what say you as udev owner?

That all sounds very much like something which will hit us back some
day. I'm not sure, if udev should publish such dead text files in
/dev, it does not seem to fit the usual APIs/assumptions where /sys
and /dev match, and libudev provides access to both. It all sounds
more like a database for a possible netdevname library, which does not
need to be public in /dev, right?

Thanks,
Kay
--
To unsubscribe from this list: send the line "unsubscribe linux-hotplug" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] udev: create empty regular files to represent net

[Kay Sievers]

On Tue, Oct 27, 2009 at 21:55, Matt Domsch <Matt_Domsch@dell.com> wrote:
> On Thu, Oct 22, 2009 at 12:36:20AM -0600, dann frazier wrote:
>> Here's a proof of concept to further the discussion..
>>
>> The default filename uses the format:
>>   /dev/netdev/by-ifindex/$ifindex
>>
>> This provides the infrastructure to permit udev rules to create aliases for
>> network devices using symlinks, for example:
>>
>>   /dev/netdev/by-name/eth0 -> ../by-ifindex/1
>>   /dev/netdev/by-biosname/LOM0 -> ../by-ifindex/3
>>
>> A library (such as the proposed libnetdevname) could use this information
>> to provide an alias->realname mapping for network utilities.
>
> yes, this could work, as IFINDEX is already exported in the uevents,
> and that's the primary value udev needs to set up the mapping.
>
> While I like the little ifindex2name script you've got, I think udev
> could simply call if_indextoname() to get this, and not call an
> external program?  I suppose it could be a really really simple
> external program too.

What's the point of all this? Why would udev ever need to find the
name of a device by the ifindex? The device name is the primary value
for the kernel events udev acts on.

> I'd be fine with this approach.  It has the advantages of not
> requiring a kernel change at all, and not creating a whole character
> device which would be useless.  And it doesn't preclude someone in the
> future from creating a char device for network devices should they so
> choose.
>
> Kay, what say you as udev owner?

That all sounds very much like something which will hit us back some
day. I'm not sure, if udev should publish such dead text files in
/dev, it does not seem to fit the usual APIs/assumptions where /sys
and /dev match, and libudev provides access to both. It all sounds
more like a database for a possible netdevname library, which does not
need to be public in /dev, right?

Thanks,
Kay

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Matt Domsch]

On Wed, Oct 28, 2009 at 09:23:57AM +0100, Kay Sievers wrote:
> On Tue, Oct 27, 2009 at 21:55, Matt Domsch <Matt_Domsch@dell.com> wrote:
> > On Thu, Oct 22, 2009 at 12:36:20AM -0600, dann frazier wrote:
> >> Here's a proof of concept to further the discussion..
> >>
> >> The default filename uses the format:
> >> ?? /dev/netdev/by-ifindex/$ifindex
> >>
> >> This provides the infrastructure to permit udev rules to create aliases for
> >> network devices using symlinks, for example:
> >>
> >> ?? /dev/netdev/by-name/eth0 -> ../by-ifindex/1
> >> ?? /dev/netdev/by-biosname/LOM0 -> ../by-ifindex/3
> >>
> >> A library (such as the proposed libnetdevname) could use this information
> >> to provide an alias->realname mapping for network utilities.
> >
> > yes, this could work, as IFINDEX is already exported in the uevents,
> > and that's the primary value udev needs to set up the mapping.
> >
> > While I like the little ifindex2name script you've got, I think udev
> > could simply call if_indextoname() to get this, and not call an
> > external program? ??I suppose it could be a really really simple
> > external program too.
> 
> What's the point of all this? Why would udev ever need to find the
> name of a device by the ifindex? The device name is the primary value
> for the kernel events udev acts on.

Ultimately, udev doesn't care.  I just want to use udev to keep track
of the pathname to device connections, like it does for all other
types of devices.

Applications such as net-tools, iproute, ethtool, etc.  take a kernel
device name.  I want to extend them to also take a path, and resolve
that path to a kernel device name.  libnetdevname currently is _one
small function_ which does this.  It need not even be in a library.
But whatever the mechanism, the path names need to be anchored
somewhere, so the library or all apps doing this kind of lookup know
where to look.

> That all sounds very much like something which will hit us back some
> day. I'm not sure, if udev should publish such dead text files in
> /dev, it does not seem to fit the usual APIs/assumptions where /sys
> and /dev match, and libudev provides access to both. It all sounds
> more like a database for a possible netdevname library, which does not
> need to be public in /dev, right?

Right, it doesn't need to be in /dev.  We could have udev rules that
simply call yet another program to maintain that database, in yet
another way.  But I really like how udev maintains the database of
symlinks for other device types, using symlinks in /dev/, and which
people are quite familiar with.  Why can't it be extended to do
likewise for network device names too?

There is a completely different approach possible here, if people
don't want to use something like /dev to track device name aliases.
We could put the whole name alias mechanism in the kernel, with new
netlink commands to add/remove/list aliases (and now we've overloaded that
term, as the old eth0:1 "alias" and dmz -> eth1 "alias" wouldn't be
the same thing).  But that idea hasn't met with a lot of interest
either.


-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Matt Domsch]

On Wed, Oct 28, 2009 at 09:23:57AM +0100, Kay Sievers wrote:
> On Tue, Oct 27, 2009 at 21:55, Matt Domsch <Matt_Domsch@dell.com> wrote:
> > On Thu, Oct 22, 2009 at 12:36:20AM -0600, dann frazier wrote:
> >> Here's a proof of concept to further the discussion..
> >>
> >> The default filename uses the format:
> >> ?? /dev/netdev/by-ifindex/$ifindex
> >>
> >> This provides the infrastructure to permit udev rules to create aliases for
> >> network devices using symlinks, for example:
> >>
> >> ?? /dev/netdev/by-name/eth0 -> ../by-ifindex/1
> >> ?? /dev/netdev/by-biosname/LOM0 -> ../by-ifindex/3
> >>
> >> A library (such as the proposed libnetdevname) could use this information
> >> to provide an alias->realname mapping for network utilities.
> >
> > yes, this could work, as IFINDEX is already exported in the uevents,
> > and that's the primary value udev needs to set up the mapping.
> >
> > While I like the little ifindex2name script you've got, I think udev
> > could simply call if_indextoname() to get this, and not call an
> > external program? ??I suppose it could be a really really simple
> > external program too.
> 
> What's the point of all this? Why would udev ever need to find the
> name of a device by the ifindex? The device name is the primary value
> for the kernel events udev acts on.

Ultimately, udev doesn't care.  I just want to use udev to keep track
of the pathname to device connections, like it does for all other
types of devices.

Applications such as net-tools, iproute, ethtool, etc.  take a kernel
device name.  I want to extend them to also take a path, and resolve
that path to a kernel device name.  libnetdevname currently is _one
small function_ which does this.  It need not even be in a library.
But whatever the mechanism, the path names need to be anchored
somewhere, so the library or all apps doing this kind of lookup know
where to look.

> That all sounds very much like something which will hit us back some
> day. I'm not sure, if udev should publish such dead text files in
> /dev, it does not seem to fit the usual APIs/assumptions where /sys
> and /dev match, and libudev provides access to both. It all sounds
> more like a database for a possible netdevname library, which does not
> need to be public in /dev, right?

Right, it doesn't need to be in /dev.  We could have udev rules that
simply call yet another program to maintain that database, in yet
another way.  But I really like how udev maintains the database of
symlinks for other device types, using symlinks in /dev/, and which
people are quite familiar with.  Why can't it be extended to do
likewise for network device names too?

There is a completely different approach possible here, if people
don't want to use something like /dev to track device name aliases.
We could put the whole name alias mechanism in the kernel, with new
netlink commands to add/remove/list aliases (and now we've overloaded that
term, as the old eth0:1 "alias" and dmz -> eth1 "alias" wouldn't be
the same thing).  But that idea hasn't met with a lot of interest
either.


-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Ben Hutchings]

On Wed, 2009-10-28 at 09:23 +0100, Kay Sievers wrote:
> On Tue, Oct 27, 2009 at 21:55, Matt Domsch <Matt_Domsch@dell.com> wrote:
> > On Thu, Oct 22, 2009 at 12:36:20AM -0600, dann frazier wrote:
> >> Here's a proof of concept to further the discussion..
> >>
> >> The default filename uses the format:
> >>   /dev/netdev/by-ifindex/$ifindex
> >>
> >> This provides the infrastructure to permit udev rules to create aliases for
> >> network devices using symlinks, for example:
> >>
> >>   /dev/netdev/by-name/eth0 -> ../by-ifindex/1
> >>   /dev/netdev/by-biosname/LOM0 -> ../by-ifindex/3
> >>
> >> A library (such as the proposed libnetdevname) could use this information
> >> to provide an alias->realname mapping for network utilities.
> >
> > yes, this could work, as IFINDEX is already exported in the uevents,
> > and that's the primary value udev needs to set up the mapping.
> >
> > While I like the little ifindex2name script you've got, I think udev
> > could simply call if_indextoname() to get this, and not call an
> > external program?  I suppose it could be a really really simple
> > external program too.
> 
> What's the point of all this? Why would udev ever need to find the
> name of a device by the ifindex? The device name is the primary value
> for the kernel events udev acts on.
[...]

Since net devices can be renamed, unlike other devices, the ifindex is
the proper stable identifier.  Using the name as an identifier opens up
race conditions.  If there are events that don't include the ifindex,
this should be fixed.

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: [PATCH] udev: create empty regular files to represent net

[Ben Hutchings]

On Wed, 2009-10-28 at 09:23 +0100, Kay Sievers wrote:
> On Tue, Oct 27, 2009 at 21:55, Matt Domsch <Matt_Domsch@dell.com> wrote:
> > On Thu, Oct 22, 2009 at 12:36:20AM -0600, dann frazier wrote:
> >> Here's a proof of concept to further the discussion..
> >>
> >> The default filename uses the format:
> >>   /dev/netdev/by-ifindex/$ifindex
> >>
> >> This provides the infrastructure to permit udev rules to create aliases for
> >> network devices using symlinks, for example:
> >>
> >>   /dev/netdev/by-name/eth0 -> ../by-ifindex/1
> >>   /dev/netdev/by-biosname/LOM0 -> ../by-ifindex/3
> >>
> >> A library (such as the proposed libnetdevname) could use this information
> >> to provide an alias->realname mapping for network utilities.
> >
> > yes, this could work, as IFINDEX is already exported in the uevents,
> > and that's the primary value udev needs to set up the mapping.
> >
> > While I like the little ifindex2name script you've got, I think udev
> > could simply call if_indextoname() to get this, and not call an
> > external program?  I suppose it could be a really really simple
> > external program too.
> 
> What's the point of all this? Why would udev ever need to find the
> name of a device by the ifindex? The device name is the primary value
> for the kernel events udev acts on.
[...]

Since net devices can be renamed, unlike other devices, the ifindex is
the proper stable identifier.  Using the name as an identifier opens up
race conditions.  If there are events that don't include the ifindex,
this should be fixed.

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: [PATCH] udev: create empty regular files to represent net interfaces

[dann frazier]

On Wed, Oct 28, 2009 at 08:03:08AM -0500, Matt Domsch wrote:
> On Wed, Oct 28, 2009 at 09:23:57AM +0100, Kay Sievers wrote:
[...]
> > That all sounds very much like something which will hit us back some
> > day. I'm not sure, if udev should publish such dead text files in
> > /dev, it does not seem to fit the usual APIs/assumptions where /sys
> > and /dev match, and libudev provides access to both. It all sounds
> > more like a database for a possible netdevname library, which does not
> > need to be public in /dev, right?
> 
> Right, it doesn't need to be in /dev.  We could have udev rules that
> simply call yet another program to maintain that database, in yet
> another way.

Or have udev maintain them in a private directory (e.g.,
/var/lib/udev/netalias). Personally, I like the approach of having
udev manage them as files - its an abstraction our users already get,
and they don't have to learn two mechanisms when aliasing disks and
nics (SYMLINK ftw). Plus there's obviously a lot of code reuse to be
had (most of my patch was moving code into a common section).

If we want to hide the file implementation - we could invent another
udev construct that basically aliases SYMLINK (e.g. NETALIAS) that
works iff the device is a netdevice. That would let us switch out
implementations in the future, but would obviously be much more
invasive.

-- 
dann frazier

Re: [PATCH] udev: create empty regular files to represent net

[dann frazier]

On Wed, Oct 28, 2009 at 08:03:08AM -0500, Matt Domsch wrote:
> On Wed, Oct 28, 2009 at 09:23:57AM +0100, Kay Sievers wrote:
[...]
> > That all sounds very much like something which will hit us back some
> > day. I'm not sure, if udev should publish such dead text files in
> > /dev, it does not seem to fit the usual APIs/assumptions where /sys
> > and /dev match, and libudev provides access to both. It all sounds
> > more like a database for a possible netdevname library, which does not
> > need to be public in /dev, right?
> 
> Right, it doesn't need to be in /dev.  We could have udev rules that
> simply call yet another program to maintain that database, in yet
> another way.

Or have udev maintain them in a private directory (e.g.,
/var/lib/udev/netalias). Personally, I like the approach of having
udev manage them as files - its an abstraction our users already get,
and they don't have to learn two mechanisms when aliasing disks and
nics (SYMLINK ftw). Plus there's obviously a lot of code reuse to be
had (most of my patch was moving code into a common section).

If we want to hide the file implementation - we could invent another
udev construct that basically aliases SYMLINK (e.g. NETALIAS) that
works iff the device is a netdevice. That would let us switch out
implementations in the future, but would obviously be much more
invasive.

-- 
dann frazier

RE: [PATCH] udev: create empty regular files to represent net interfaces

[Jordan_Hargrave]

I was thinking, if we're not planning on use the chardev/kernel route.  There already exists an ifindex file in /sys/class/net/XXX/ifindex.
Should udev/helper be creating links to this, or is it better to keep everything under the /dev/ tree?
Using this method would require the patch to udev to handle renaming events.

--jordan hargrave
Dell Enterprise Linux Engineering



-----Original Message-----
From: dann frazier [mailto:dannf@hp.com]
Sent: Wed 10/28/2009 10:09
To: Domsch, Matt
Cc: Kay Sievers; linux-hotplug@vger.kernel.org; K, Narendra; netdev@vger.kernel.org; Hargrave, Jordan; Rose, Charles; Ben Hutchings
Subject: Re: [PATCH] udev: create empty regular files to represent net interfaces
 
On Wed, Oct 28, 2009 at 08:03:08AM -0500, Matt Domsch wrote:
> On Wed, Oct 28, 2009 at 09:23:57AM +0100, Kay Sievers wrote:
[...]
> > That all sounds very much like something which will hit us back some
> > day. I'm not sure, if udev should publish such dead text files in
> > /dev, it does not seem to fit the usual APIs/assumptions where /sys
> > and /dev match, and libudev provides access to both. It all sounds
> > more like a database for a possible netdevname library, which does not
> > need to be public in /dev, right?
> 
> Right, it doesn't need to be in /dev.  We could have udev rules that
> simply call yet another program to maintain that database, in yet
> another way.

Or have udev maintain them in a private directory (e.g.,
/var/lib/udev/netalias). Personally, I like the approach of having
udev manage them as files - its an abstraction our users already get,
and they don't have to learn two mechanisms when aliasing disks and
nics (SYMLINK ftw). Plus there's obviously a lot of code reuse to be
had (most of my patch was moving code into a common section).

If we want to hide the file implementation - we could invent another
udev construct that basically aliases SYMLINK (e.g. NETALIAS) that
works iff the device is a netdevice. That would let us switch out
implementations in the future, but would obviously be much more
invasive.

-- 
dann frazier

RE: [PATCH] udev: create empty regular files to represent net interfaces

[Jordan_Hargrave]

I was thinking, if we're not planning on use the chardev/kernel route.  There already exists an ifindex file in /sys/class/net/XXX/ifindex.
Should udev/helper be creating links to this, or is it better to keep everything under the /dev/ tree?
Using this method would require the patch to udev to handle renaming events.

--jordan hargrave
Dell Enterprise Linux Engineering



-----Original Message-----
From: dann frazier [mailto:dannf@hp.com]
Sent: Wed 10/28/2009 10:09
To: Domsch, Matt
Cc: Kay Sievers; linux-hotplug@vger.kernel.org; K, Narendra; netdev@vger.kernel.org; Hargrave, Jordan; Rose, Charles; Ben Hutchings
Subject: Re: [PATCH] udev: create empty regular files to represent net interfaces
 
On Wed, Oct 28, 2009 at 08:03:08AM -0500, Matt Domsch wrote:
> On Wed, Oct 28, 2009 at 09:23:57AM +0100, Kay Sievers wrote:
[...]
> > That all sounds very much like something which will hit us back some
> > day. I'm not sure, if udev should publish such dead text files in
> > /dev, it does not seem to fit the usual APIs/assumptions where /sys
> > and /dev match, and libudev provides access to both. It all sounds
> > more like a database for a possible netdevname library, which does not
> > need to be public in /dev, right?
> 
> Right, it doesn't need to be in /dev.  We could have udev rules that
> simply call yet another program to maintain that database, in yet
> another way.

Or have udev maintain them in a private directory (e.g.,
/var/lib/udev/netalias). Personally, I like the approach of having
udev manage them as files - its an abstraction our users already get,
and they don't have to learn two mechanisms when aliasing disks and
nics (SYMLINK ftw). Plus there's obviously a lot of code reuse to be
had (most of my patch was moving code into a common section).

If we want to hide the file implementation - we could invent another
udev construct that basically aliases SYMLINK (e.g. NETALIAS) that
works iff the device is a netdevice. That would let us switch out
implementations in the future, but would obviously be much more
invasive.

-- 
dann frazier

RE: [PATCH] udev: create empty regular files to represent net interfaces

[Jordan_Hargrave]

I was thinking, if we're not planning on use the chardev/kernel route.  There already exists an ifindex file in /sys/class/net/XXX/ifindex.
Should udev/helper be creating links to this, or is it better to keep everything under the /dev/ tree?
Using this method would require the patch to udev to handle renaming events.


--jordan hargrave
Dell Enterprise Linux Engineering



-----Original Message-----
From: dann frazier [mailto:dannf@hp.com]
Sent: Wed 10/28/2009 10:09
To: Domsch, Matt
Cc: Kay Sievers; linux-hotplug@vger.kernel.org; K, Narendra; netdev@vger.kernel.org; Hargrave, Jordan; Rose, Charles; Ben Hutchings
Subject: Re: [PATCH] udev: create empty regular files to represent net interfaces
 
On Wed, Oct 28, 2009 at 08:03:08AM -0500, Matt Domsch wrote:
> On Wed, Oct 28, 2009 at 09:23:57AM +0100, Kay Sievers wrote:
[...]
> > That all sounds very much like something which will hit us back some
> > day. I'm not sure, if udev should publish such dead text files in
> > /dev, it does not seem to fit the usual APIs/assumptions where /sys
> > and /dev match, and libudev provides access to both. It all sounds
> > more like a database for a possible netdevname library, which does not
> > need to be public in /dev, right?
> 
> Right, it doesn't need to be in /dev.  We could have udev rules that
> simply call yet another program to maintain that database, in yet
> another way.

Or have udev maintain them in a private directory (e.g.,
/var/lib/udev/netalias). Personally, I like the approach of having
udev manage them as files - its an abstraction our users already get,
and they don't have to learn two mechanisms when aliasing disks and
nics (SYMLINK ftw). Plus there's obviously a lot of code reuse to be
had (most of my patch was moving code into a common section).

If we want to hide the file implementation - we could invent another
udev construct that basically aliases SYMLINK (e.g. NETALIAS) that
works iff the device is a netdevice. That would let us switch out
implementations in the future, but would obviously be much more
invasive.

-- 
dann frazier

RE: [PATCH] udev: create empty regular files to represent net interfaces

[Jordan_Hargrave]

I was thinking, if we're not planning on use the chardev/kernel route.  There already exists an ifindex file in /sys/class/net/XXX/ifindex.
Should udev/helper be creating links to this, or is it better to keep everything under the /dev/ tree?
Using this method would require the patch to udev to handle renaming events.


--jordan hargrave
Dell Enterprise Linux Engineering



-----Original Message-----
From: dann frazier [mailto:dannf@hp.com]
Sent: Wed 10/28/2009 10:09
To: Domsch, Matt
Cc: Kay Sievers; linux-hotplug@vger.kernel.org; K, Narendra; netdev@vger.kernel.org; Hargrave, Jordan; Rose, Charles; Ben Hutchings
Subject: Re: [PATCH] udev: create empty regular files to represent net interfaces
 
On Wed, Oct 28, 2009 at 08:03:08AM -0500, Matt Domsch wrote:
> On Wed, Oct 28, 2009 at 09:23:57AM +0100, Kay Sievers wrote:
[...]
> > That all sounds very much like something which will hit us back some
> > day. I'm not sure, if udev should publish such dead text files in
> > /dev, it does not seem to fit the usual APIs/assumptions where /sys
> > and /dev match, and libudev provides access to both. It all sounds
> > more like a database for a possible netdevname library, which does not
> > need to be public in /dev, right?
> 
> Right, it doesn't need to be in /dev.  We could have udev rules that
> simply call yet another program to maintain that database, in yet
> another way.

Or have udev maintain them in a private directory (e.g.,
/var/lib/udev/netalias). Personally, I like the approach of having
udev manage them as files - its an abstraction our users already get,
and they don't have to learn two mechanisms when aliasing disks and
nics (SYMLINK ftw). Plus there's obviously a lot of code reuse to be
had (most of my patch was moving code into a common section).

If we want to hide the file implementation - we could invent another
udev construct that basically aliases SYMLINK (e.g. NETALIAS) that
works iff the device is a netdevice. That would let us switch out
implementations in the future, but would obviously be much more
invasive.

-- 
dann frazier

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Greg KH]

A: No.
Q: Should I include quotations after my reply?

http://daringfireball.net/2007/07/on_top

On Wed, Oct 28, 2009 at 11:09:36AM -0500, Jordan_Hargrave@Dell.com wrote:
> I was thinking, if we're not planning on use the chardev/kernel route.
> There already exists an ifindex file in /sys/class/net/XXX/ifindex.
> Should udev/helper be creating links to this, or is it better to keep
> everything under the /dev/ tree?  Using this method would require the
> patch to udev to handle renaming events.

Please never create symlinks out of /dev/ to /sys that doesn't make
sense at all and probably violates part of the LSB somewhere...

thanks,

greg k-h

Re: [PATCH] udev: create empty regular files to represent net

[Greg KH]

A: No.
Q: Should I include quotations after my reply?

http://daringfireball.net/2007/07/on_top

On Wed, Oct 28, 2009 at 11:09:36AM -0500, Jordan_Hargrave@Dell.com wrote:
> I was thinking, if we're not planning on use the chardev/kernel route.
> There already exists an ifindex file in /sys/class/net/XXX/ifindex.
> Should udev/helper be creating links to this, or is it better to keep
> everything under the /dev/ tree?  Using this method would require the
> patch to udev to handle renaming events.

Please never create symlinks out of /dev/ to /sys that doesn't make
sense at all and probably violates part of the LSB somewhere...

thanks,

greg k-h

RE: [PATCH] udev: create empty regular files to represent net interfaces

[Narendra_K]

>That all sounds very much like something which will hit us 
>back some day. I'm not sure, if udev should publish such dead 
>text files in /dev, it does not seem to fit the usual 
>APIs/assumptions where /sys and /dev match, and libudev 
>provides access to both. It all sounds more like a database 
>for a possible netdevname library, which does not need to be 
>public in /dev, right?

The char device nodes under /dev/netdev/ do seem to adhere to the
assumption of what is there under /sys and /dev match.

With regards,
Narendra K

RE: [PATCH] udev: create empty regular files to represent net interfaces

[Narendra_K]

>That all sounds very much like something which will hit us 
>back some day. I'm not sure, if udev should publish such dead 
>text files in /dev, it does not seem to fit the usual 
>APIs/assumptions where /sys and /dev match, and libudev 
>provides access to both. It all sounds more like a database 
>for a possible netdevname library, which does not need to be 
>public in /dev, right?

The char device nodes under /dev/netdev/ do seem to adhere to the
assumption of what is there under /sys and /dev match.

With regards,
Narendra K

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Matt Domsch]

On Wed, Oct 28, 2009 at 09:23:57AM +0100, Kay Sievers wrote:
> On Tue, Oct 27, 2009 at 21:55, Matt Domsch <Matt_Domsch@dell.com> wrote:
> > On Thu, Oct 22, 2009 at 12:36:20AM -0600, dann frazier wrote:
> >> Here's a proof of concept to further the discussion..
> >>
> >> The default filename uses the format:
> >> ?? /dev/netdev/by-ifindex/$ifindex
> >>
> >> This provides the infrastructure to permit udev rules to create aliases for
> >> network devices using symlinks, for example:
> >>
> >> ?? /dev/netdev/by-name/eth0 -> ../by-ifindex/1
> >> ?? /dev/netdev/by-biosname/LOM0 -> ../by-ifindex/3
> >>
> >> A library (such as the proposed libnetdevname) could use this information
> >> to provide an alias->realname mapping for network utilities.
>
> That all sounds very much like something which will hit us back some
> day. I'm not sure, if udev should publish such dead text files in
> /dev, it does not seem to fit the usual APIs/assumptions where /sys
> and /dev match, and libudev provides access to both.

While we could do this without any kernel changes at all, it does
still leave unresolved the concern of the in-kernel users of
netdevice-by-name - everything that uses dev_get_by_name(), and any
userspace tool that doesn't get converted to use the netdevice-by-path
concept.

Which brings us back to still looking for options.

Multiple names for the same device gives us a way out.
Users of the ethX naming convention continue unchanged, and live
with the nondeterminism; Users of other naming conventions can get
names that work for them, with needed determinism.

Netdev team - are you in agreement that having multiple names to
address the same netdevice is a worthwhile thing to add, to allow a
variety of naming schemes to exist simultaneously?  If not, this whole
discussion will be moot, and my basic problem, that the ethX naming
convention is nondeterministic, but we need determinism, remains
unresolved.

Assuming we agree it's worthwhile, I'm open to ideas for ways to solve
it.  We've proposed char devices for udev to manage, and fixing up
userspace programs, but that doesn't solve in-kernel users by name.
Dann proposed another method (above) which Kay isn't fond of, and
which has the same drawback.  I need another option then.

Thanks,
Matt

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Matt Domsch]

On Wed, Oct 28, 2009 at 09:23:57AM +0100, Kay Sievers wrote:
> On Tue, Oct 27, 2009 at 21:55, Matt Domsch <Matt_Domsch@dell.com> wrote:
> > On Thu, Oct 22, 2009 at 12:36:20AM -0600, dann frazier wrote:
> >> Here's a proof of concept to further the discussion..
> >>
> >> The default filename uses the format:
> >> ?? /dev/netdev/by-ifindex/$ifindex
> >>
> >> This provides the infrastructure to permit udev rules to create aliases for
> >> network devices using symlinks, for example:
> >>
> >> ?? /dev/netdev/by-name/eth0 -> ../by-ifindex/1
> >> ?? /dev/netdev/by-biosname/LOM0 -> ../by-ifindex/3
> >>
> >> A library (such as the proposed libnetdevname) could use this information
> >> to provide an alias->realname mapping for network utilities.
>
> That all sounds very much like something which will hit us back some
> day. I'm not sure, if udev should publish such dead text files in
> /dev, it does not seem to fit the usual APIs/assumptions where /sys
> and /dev match, and libudev provides access to both.

While we could do this without any kernel changes at all, it does
still leave unresolved the concern of the in-kernel users of
netdevice-by-name - everything that uses dev_get_by_name(), and any
userspace tool that doesn't get converted to use the netdevice-by-path
concept.

Which brings us back to still looking for options.

Multiple names for the same device gives us a way out.
Users of the ethX naming convention continue unchanged, and live
with the nondeterminism; Users of other naming conventions can get
names that work for them, with needed determinism.

Netdev team - are you in agreement that having multiple names to
address the same netdevice is a worthwhile thing to add, to allow a
variety of naming schemes to exist simultaneously?  If not, this whole
discussion will be moot, and my basic problem, that the ethX naming
convention is nondeterministic, but we need determinism, remains
unresolved.

Assuming we agree it's worthwhile, I'm open to ideas for ways to solve
it.  We've proposed char devices for udev to manage, and fixing up
userspace programs, but that doesn't solve in-kernel users by name.
Dann proposed another method (above) which Kay isn't fond of, and
which has the same drawback.  I need another option then.

Thanks,
Matt

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Greg KH]

On Thu, Oct 29, 2009 at 08:11:25AM -0500, Matt Domsch wrote:
> Netdev team - are you in agreement that having multiple names to
> address the same netdevice is a worthwhile thing to add, to allow a
> variety of naming schemes to exist simultaneously?  If not, this whole
> discussion will be moot, and my basic problem, that the ethX naming
> convention is nondeterministic, but we need determinism, remains
> unresolved.

I'm still totally confused as to why you think this.  What is wrong with
what we do today, which is name network devices in a deterministic
manner by their MAC in userspace?  That name goes into the kernel, and
everyone uses the same name and is happy.

If you don't like naming by MAC, then pick some other deterministic
naming scheme that works for your hardware and write udev rules for it.

You could easily name them in a way that could keep the lowest number
(eth0) for the lowest PCI id if you so desired and your BIOS guaranteed
it.

This way the kernel has only one name, and so does userspace, and
everyone is happy.

thanks,

greg k-h

Re: [PATCH] udev: create empty regular files to represent net

[Greg KH]

On Thu, Oct 29, 2009 at 08:11:25AM -0500, Matt Domsch wrote:
> Netdev team - are you in agreement that having multiple names to
> address the same netdevice is a worthwhile thing to add, to allow a
> variety of naming schemes to exist simultaneously?  If not, this whole
> discussion will be moot, and my basic problem, that the ethX naming
> convention is nondeterministic, but we need determinism, remains
> unresolved.

I'm still totally confused as to why you think this.  What is wrong with
what we do today, which is name network devices in a deterministic
manner by their MAC in userspace?  That name goes into the kernel, and
everyone uses the same name and is happy.

If you don't like naming by MAC, then pick some other deterministic
naming scheme that works for your hardware and write udev rules for it.

You could easily name them in a way that could keep the lowest number
(eth0) for the lowest PCI id if you so desired and your BIOS guaranteed
it.

This way the kernel has only one name, and so does userspace, and
everyone is happy.

thanks,

greg k-h

RE: [PATCH] udev: create empty regular files to represent net interfaces

[Narendra_K]

[-- Attachment #1: Type: text/plain, Size: 3054 bytes --]


>> Netdev team - are you in agreement that having multiple names to 
>> address the same netdevice is a worthwhile thing to add, to allow a 
>> variety of naming schemes to exist simultaneously?  If not, 
>this whole 
>> discussion will be moot, and my basic problem, that the ethX naming 
>> convention is nondeterministic, but we need determinism, remains 
>> unresolved.
>
>I'm still totally confused as to why you think this.  What is 
>wrong with what we do today, which is name network devices in 
>a deterministic manner by their MAC in userspace?  That name 
>goes into the kernel, and everyone uses the same name and is happy.

The interface name as assigned by the OS is determined by how the
interface is named first during the OS installation. This name is made
persistent by associating the name with it's MAC address in userspace,
either by udev or ifcfg-eth files. In cases where there are one or more
add-in cards along with one or more integrated cards (Lan on
Motherboard), the integrated port 1, which is designated as Gb1 on the
chassis may or may not get the name "eth0". And that is the customer
expectation, most of the times.
Unattended installs and large scale image based installs are the most
affected scenarios. 

>If you don't like naming by MAC, then pick some other 
>deterministic naming scheme that works for your hardware and 
>write udev rules for it.
>
>You could easily name them in a way that could keep the lowest number
>(eth0) for the lowest PCI id if you so desired and your BIOS 
>guaranteed it.
>

This is how the lspci tree view on a PER710 (PowerEdge R710) server with
Four BCM5709 integrated NIC ports and One add-in Intel NIC port looks
like. The integrated ports are always found before the add-in nic (or
nics) by the BIOS consistently and BIOS guarantees it across every
reboot. If the OS also found and named the network ports in the same
manner, then there is no issue as integrated NIC port 1, designated Gb1
on the chassis, is always named as "eth0". But the observation is that,
it is not the case always.

-[0000:00]-+-00.0  Intel Corporation 5520 I/O Hub to ESI Port
           +-01.0-[0000:01]--+-00.0  Broadcom Corporation NetXtreme II
BCM5709 Gigabit Ethernet
           |                 \-00.1  Broadcom Corporation NetXtreme II
BCM5709 Gigabit Ethernet
           +-03.0-[0000:02]--+-00.0  Broadcom Corporation NetXtreme II
BCM5709 Gigabit Ethernet
           |                 \-00.1  Broadcom Corporation NetXtreme II
BCM5709 Gigabit Ethernet
           +-04.0-[0000:03]----00.0  LSI Logic / Symbios Logic MegaRAID
SAS 1078
           +-05.0-[0000:04]--
           +-06.0-[0000:05]--
           +-07.0-[0000:06]--
           +-09.0-[0000:07]----00.0  Intel Corporation 82598EB
10-Gigabit AT Network Connection

In such cases, pathnames like Embedded_NIC_1 -> eth[01..], point to the
right interface, and communicate a more meaningful name without any
state embedded in them.

With regards,
Narendra K


          



[-- Attachment #2: PER710-lspci-tv.output --]
[-- Type: application/octet-stream, Size: 735 bytes --]

-[0000:00]-+-00.0  Intel Corporation 5520 I/O Hub to ESI Port
           +-01.0-[0000:01]--+-00.0  Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet
           |                 \-00.1  Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet
           +-03.0-[0000:02]--+-00.0  Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet
           |                 \-00.1  Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet
           +-04.0-[0000:03]----00.0  LSI Logic / Symbios Logic MegaRAID SAS 1078
           +-05.0-[0000:04]--
           +-06.0-[0000:05]--
           +-07.0-[0000:06]--
           +-09.0-[0000:07]----00.0  Intel Corporation 82598EB 10-Gigabit AT Network Connection
          

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Ben Hutchings]

On Thu, 2009-10-29 at 07:25 -0700, Greg KH wrote:
> On Thu, Oct 29, 2009 at 08:11:25AM -0500, Matt Domsch wrote:
> > Netdev team - are you in agreement that having multiple names to
> > address the same netdevice is a worthwhile thing to add, to allow a
> > variety of naming schemes to exist simultaneously?  If not, this whole
> > discussion will be moot, and my basic problem, that the ethX naming
> > convention is nondeterministic, but we need determinism, remains
> > unresolved.
> 
> I'm still totally confused as to why you think this.  What is wrong with
> what we do today, which is name network devices in a deterministic
> manner by their MAC in userspace?  That name goes into the kernel, and
> everyone uses the same name and is happy.
> 
> If you don't like naming by MAC, then pick some other deterministic
> naming scheme that works for your hardware and write udev rules for it.
> 
> You could easily name them in a way that could keep the lowest number
> (eth0) for the lowest PCI id if you so desired and your BIOS guaranteed
> it.
> 
> This way the kernel has only one name, and so does userspace, and
> everyone is happy.

I thought there was a general trend in udev development to provide
default rules that work for almost everyone, so few users/administrators
need to override or add to them.  Compare disks and net devices:

1. Stable kernel device id
Disks: block device number
Net devices: ifindex

2. Unique identifier (across reboot)
Disks: label or UUID (each with limitations)
Net devices: (MAC address, subtype)

3. Name assignment mechanism
Disks: kernel suggests a name; udev can assign any number
Net devices: kernel assigns a single name; udev can override it

4. Default name assignment policy
Disks: names disk by device path (id), label and UUID
Net devices: assigns arbitrary stable names per (MAC address, subtype)

5. Naming by users
Disks: user can identify by any method without having to choose on a
system-wide basis
Net devices: user must identify by single name; policy can be overridden
on a system-wide basis

I fully understand the technical reasons for differences 3-5, but why
should users have to put up with it?

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

--
To unsubscribe from this list: send the line "unsubscribe linux-hotplug" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] udev: create empty regular files to represent net

[Ben Hutchings]

On Thu, 2009-10-29 at 07:25 -0700, Greg KH wrote:
> On Thu, Oct 29, 2009 at 08:11:25AM -0500, Matt Domsch wrote:
> > Netdev team - are you in agreement that having multiple names to
> > address the same netdevice is a worthwhile thing to add, to allow a
> > variety of naming schemes to exist simultaneously?  If not, this whole
> > discussion will be moot, and my basic problem, that the ethX naming
> > convention is nondeterministic, but we need determinism, remains
> > unresolved.
> 
> I'm still totally confused as to why you think this.  What is wrong with
> what we do today, which is name network devices in a deterministic
> manner by their MAC in userspace?  That name goes into the kernel, and
> everyone uses the same name and is happy.
> 
> If you don't like naming by MAC, then pick some other deterministic
> naming scheme that works for your hardware and write udev rules for it.
> 
> You could easily name them in a way that could keep the lowest number
> (eth0) for the lowest PCI id if you so desired and your BIOS guaranteed
> it.
> 
> This way the kernel has only one name, and so does userspace, and
> everyone is happy.

I thought there was a general trend in udev development to provide
default rules that work for almost everyone, so few users/administrators
need to override or add to them.  Compare disks and net devices:

1. Stable kernel device id
Disks: block device number
Net devices: ifindex

2. Unique identifier (across reboot)
Disks: label or UUID (each with limitations)
Net devices: (MAC address, subtype)

3. Name assignment mechanism
Disks: kernel suggests a name; udev can assign any number
Net devices: kernel assigns a single name; udev can override it

4. Default name assignment policy
Disks: names disk by device path (id), label and UUID
Net devices: assigns arbitrary stable names per (MAC address, subtype)

5. Naming by users
Disks: user can identify by any method without having to choose on a
system-wide basis
Net devices: user must identify by single name; policy can be overridden
on a system-wide basis

I fully understand the technical reasons for differences 3-5, but why
should users have to put up with it?

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Greg KH]

On Thu, Oct 29, 2009 at 10:14:08PM +0530, Narendra_K@Dell.com wrote:
> 
> >> Netdev team - are you in agreement that having multiple names to 
> >> address the same netdevice is a worthwhile thing to add, to allow a 
> >> variety of naming schemes to exist simultaneously?  If not, 
> >this whole 
> >> discussion will be moot, and my basic problem, that the ethX naming 
> >> convention is nondeterministic, but we need determinism, remains 
> >> unresolved.
> >
> >I'm still totally confused as to why you think this.  What is 
> >wrong with what we do today, which is name network devices in 
> >a deterministic manner by their MAC in userspace?  That name 
> >goes into the kernel, and everyone uses the same name and is happy.
> 
> The interface name as assigned by the OS is determined by how the
> interface is named first during the OS installation.

That sounds like a distro install issue to me, why not fix it there?

> This name is made persistent by associating the name with it's MAC
> address in userspace, either by udev or ifcfg-eth files. In cases
> where there are one or more add-in cards along with one or more
> integrated cards (Lan on Motherboard), the integrated port 1, which is
> designated as Gb1 on the chassis may or may not get the name "eth0".

Exactly, who cares about "eth0" as a name?

> And that is the customer expectation, most of the times.

Then again, fix the installer to allow you to either pick the name, or
specify some rule in which to use to pick the name.

> Unattended installs and large scale image based installs are the most
> affected scenarios. 

Then fix the installer.

> >If you don't like naming by MAC, then pick some other 
> >deterministic naming scheme that works for your hardware and 
> >write udev rules for it.
> >
> >You could easily name them in a way that could keep the lowest number
> >(eth0) for the lowest PCI id if you so desired and your BIOS 
> >guaranteed it.
> >
> 
> This is how the lspci tree view on a PER710 (PowerEdge R710) server with
> Four BCM5709 integrated NIC ports and One add-in Intel NIC port looks
> like. The integrated ports are always found before the add-in nic (or
> nics) by the BIOS consistently and BIOS guarantees it across every
> reboot.

Great, then you are set to write a udev rule for this, right?

> If the OS also found and named the network ports in the same manner,
> then there is no issue as integrated NIC port 1, designated Gb1 on the
> chassis, is always named as "eth0". But the observation is that, it is
> not the case always.

Sure, it's never guaranteed by the kernel that this will happen,
especially as we speed up the boot process by doing things async.

So again, just fix your installer, or write a new udev rule for your
hardware platforms, or both.  But I still fail to see why multiple names
for network devices _in the kernel_ is a solution for your issue.

> In such cases, pathnames like Embedded_NIC_1 -> eth[01..], point to the
> right interface, and communicate a more meaningful name without any
> state embedded in them.

Yes, pathnames would be nice to work for network devices, but
unfortunatly, that's just not how network devices work :)

thanks,

greg k-h

Re: [PATCH] udev: create empty regular files to represent net

[Greg KH]

On Thu, Oct 29, 2009 at 10:14:08PM +0530, Narendra_K@Dell.com wrote:
> 
> >> Netdev team - are you in agreement that having multiple names to 
> >> address the same netdevice is a worthwhile thing to add, to allow a 
> >> variety of naming schemes to exist simultaneously?  If not, 
> >this whole 
> >> discussion will be moot, and my basic problem, that the ethX naming 
> >> convention is nondeterministic, but we need determinism, remains 
> >> unresolved.
> >
> >I'm still totally confused as to why you think this.  What is 
> >wrong with what we do today, which is name network devices in 
> >a deterministic manner by their MAC in userspace?  That name 
> >goes into the kernel, and everyone uses the same name and is happy.
> 
> The interface name as assigned by the OS is determined by how the
> interface is named first during the OS installation.

That sounds like a distro install issue to me, why not fix it there?

> This name is made persistent by associating the name with it's MAC
> address in userspace, either by udev or ifcfg-eth files. In cases
> where there are one or more add-in cards along with one or more
> integrated cards (Lan on Motherboard), the integrated port 1, which is
> designated as Gb1 on the chassis may or may not get the name "eth0".

Exactly, who cares about "eth0" as a name?

> And that is the customer expectation, most of the times.

Then again, fix the installer to allow you to either pick the name, or
specify some rule in which to use to pick the name.

> Unattended installs and large scale image based installs are the most
> affected scenarios. 

Then fix the installer.

> >If you don't like naming by MAC, then pick some other 
> >deterministic naming scheme that works for your hardware and 
> >write udev rules for it.
> >
> >You could easily name them in a way that could keep the lowest number
> >(eth0) for the lowest PCI id if you so desired and your BIOS 
> >guaranteed it.
> >
> 
> This is how the lspci tree view on a PER710 (PowerEdge R710) server with
> Four BCM5709 integrated NIC ports and One add-in Intel NIC port looks
> like. The integrated ports are always found before the add-in nic (or
> nics) by the BIOS consistently and BIOS guarantees it across every
> reboot.

Great, then you are set to write a udev rule for this, right?

> If the OS also found and named the network ports in the same manner,
> then there is no issue as integrated NIC port 1, designated Gb1 on the
> chassis, is always named as "eth0". But the observation is that, it is
> not the case always.

Sure, it's never guaranteed by the kernel that this will happen,
especially as we speed up the boot process by doing things async.

So again, just fix your installer, or write a new udev rule for your
hardware platforms, or both.  But I still fail to see why multiple names
for network devices _in the kernel_ is a solution for your issue.

> In such cases, pathnames like Embedded_NIC_1 -> eth[01..], point to the
> right interface, and communicate a more meaningful name without any
> state embedded in them.

Yes, pathnames would be nice to work for network devices, but
unfortunatly, that's just not how network devices work :)

thanks,

greg k-h

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Greg KH]

On Thu, Oct 29, 2009 at 04:49:35PM +0000, Ben Hutchings wrote:
> 3. Name assignment mechanism
> Disks: kernel suggests a name; udev can assign any number
> ???Net devices: kernel assigns a single name; udev can override it
> 
> 4. Default name assignment policy
> Disks: names disk by device path (id), label and UUID
> ???Net devices: assigns arbitrary stable names per (MAC address, subtype)
> 
> 5. Naming by users
> Disks: user can identify by any method without having to choose on a
> system-wide basis
> Net devices: user must identify by single name; policy can be overridden
> on a system-wide basis
> 
> I fully understand the technical reasons for differences 3-5, but why
> should users have to put up with it?

That is because network devices are not referred to by /dev/ nodes where
multiple symlinks would solve the naming problem.

thanks,

greg k-h

Re: [PATCH] udev: create empty regular files to represent net

[Greg KH]

On Thu, Oct 29, 2009 at 04:49:35PM +0000, Ben Hutchings wrote:
> 3. Name assignment mechanism
> Disks: kernel suggests a name; udev can assign any number
> ???Net devices: kernel assigns a single name; udev can override it
> 
> 4. Default name assignment policy
> Disks: names disk by device path (id), label and UUID
> ???Net devices: assigns arbitrary stable names per (MAC address, subtype)
> 
> 5. Naming by users
> Disks: user can identify by any method without having to choose on a
> system-wide basis
> Net devices: user must identify by single name; policy can be overridden
> on a system-wide basis
> 
> I fully understand the technical reasons for differences 3-5, but why
> should users have to put up with it?

That is because network devices are not referred to by /dev/ nodes where
multiple symlinks would solve the naming problem.

thanks,

greg k-h

RE: [PATCH] udev: create empty regular files to represent net interfaces

[Narendra_K]

[-- Attachment #1: Type: text/plain, Size: 3054 bytes --]


>> Netdev team - are you in agreement that having multiple names to 
>> address the same netdevice is a worthwhile thing to add, to allow a 
>> variety of naming schemes to exist simultaneously?  If not, 
>this whole 
>> discussion will be moot, and my basic problem, that the ethX naming 
>> convention is nondeterministic, but we need determinism, remains 
>> unresolved.
>
>I'm still totally confused as to why you think this.  What is 
>wrong with what we do today, which is name network devices in 
>a deterministic manner by their MAC in userspace?  That name 
>goes into the kernel, and everyone uses the same name and is happy.

The interface name as assigned by the OS is determined by how the
interface is named first during the OS installation. This name is made
persistent by associating the name with it's MAC address in userspace,
either by udev or ifcfg-eth files. In cases where there are one or more
add-in cards along with one or more integrated cards (Lan on
Motherboard), the integrated port 1, which is designated as Gb1 on the
chassis may or may not get the name "eth0". And that is the customer
expectation, most of the times.
Unattended installs and large scale image based installs are the most
affected scenarios. 

>If you don't like naming by MAC, then pick some other 
>deterministic naming scheme that works for your hardware and 
>write udev rules for it.
>
>You could easily name them in a way that could keep the lowest number
>(eth0) for the lowest PCI id if you so desired and your BIOS 
>guaranteed it.
>

This is how the lspci tree view on a PER710 (PowerEdge R710) server with
Four BCM5709 integrated NIC ports and One add-in Intel NIC port looks
like. The integrated ports are always found before the add-in nic (or
nics) by the BIOS consistently and BIOS guarantees it across every
reboot. If the OS also found and named the network ports in the same
manner, then there is no issue as integrated NIC port 1, designated Gb1
on the chassis, is always named as "eth0". But the observation is that,
it is not the case always.

-[0000:00]-+-00.0  Intel Corporation 5520 I/O Hub to ESI Port
           +-01.0-[0000:01]--+-00.0  Broadcom Corporation NetXtreme II
BCM5709 Gigabit Ethernet
           |                 \-00.1  Broadcom Corporation NetXtreme II
BCM5709 Gigabit Ethernet
           +-03.0-[0000:02]--+-00.0  Broadcom Corporation NetXtreme II
BCM5709 Gigabit Ethernet
           |                 \-00.1  Broadcom Corporation NetXtreme II
BCM5709 Gigabit Ethernet
           +-04.0-[0000:03]----00.0  LSI Logic / Symbios Logic MegaRAID
SAS 1078
           +-05.0-[0000:04]--
           +-06.0-[0000:05]--
           +-07.0-[0000:06]--
           +-09.0-[0000:07]----00.0  Intel Corporation 82598EB
10-Gigabit AT Network Connection

In such cases, pathnames like Embedded_NIC_1 -> eth[01..], point to the
right interface, and communicate a more meaningful name without any
state embedded in them.

With regards,
Narendra K


          



[-- Attachment #2: PER710-lspci-tv.output --]
[-- Type: application/octet-stream, Size: 735 bytes --]

-[0000:00]-+-00.0  Intel Corporation 5520 I/O Hub to ESI Port
           +-01.0-[0000:01]--+-00.0  Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet
           |                 \-00.1  Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet
           +-03.0-[0000:02]--+-00.0  Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet
           |                 \-00.1  Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet
           +-04.0-[0000:03]----00.0  LSI Logic / Symbios Logic MegaRAID SAS 1078
           +-05.0-[0000:04]--
           +-06.0-[0000:05]--
           +-07.0-[0000:06]--
           +-09.0-[0000:07]----00.0  Intel Corporation 82598EB 10-Gigabit AT Network Connection
          

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Ben Hutchings]

On Thu, 2009-10-29 at 09:55 -0700, Greg KH wrote:
> On Thu, Oct 29, 2009 at 04:49:35PM +0000, Ben Hutchings wrote:
> > 3. Name assignment mechanism
> > Disks: kernel suggests a name; udev can assign any number
> > ???Net devices: kernel assigns a single name; udev can override it
> > 
> > 4. Default name assignment policy
> > Disks: names disk by device path (id), label and UUID
> > ???Net devices: assigns arbitrary stable names per (MAC address, subtype)
> > 
> > 5. Naming by users
> > Disks: user can identify by any method without having to choose on a
> > system-wide basis
> > Net devices: user must identify by single name; policy can be overridden
> > on a system-wide basis
> > 
> > I fully understand the technical reasons for differences 3-5, but why
> > should users have to put up with it?
> 
> That is because network devices are not referred to by /dev/ nodes where
> multiple symlinks would solve the naming problem.

Did you even read the last sentence?

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: [PATCH] udev: create empty regular files to represent net

[Ben Hutchings]

On Thu, 2009-10-29 at 09:55 -0700, Greg KH wrote:
> On Thu, Oct 29, 2009 at 04:49:35PM +0000, Ben Hutchings wrote:
> > 3. Name assignment mechanism
> > Disks: kernel suggests a name; udev can assign any number
> > ???Net devices: kernel assigns a single name; udev can override it
> > 
> > 4. Default name assignment policy
> > Disks: names disk by device path (id), label and UUID
> > ???Net devices: assigns arbitrary stable names per (MAC address, subtype)
> > 
> > 5. Naming by users
> > Disks: user can identify by any method without having to choose on a
> > system-wide basis
> > Net devices: user must identify by single name; policy can be overridden
> > on a system-wide basis
> > 
> > I fully understand the technical reasons for differences 3-5, but why
> > should users have to put up with it?
> 
> That is because network devices are not referred to by /dev/ nodes where
> multiple symlinks would solve the naming problem.

Did you even read the last sentence?

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Greg KH]

On Thu, Oct 29, 2009 at 05:12:13PM +0000, Ben Hutchings wrote:
> On Thu, 2009-10-29 at 09:55 -0700, Greg KH wrote:
> > On Thu, Oct 29, 2009 at 04:49:35PM +0000, Ben Hutchings wrote:
> > > 3. Name assignment mechanism
> > > Disks: kernel suggests a name; udev can assign any number
> > > ???Net devices: kernel assigns a single name; udev can override it
> > > 
> > > 4. Default name assignment policy
> > > Disks: names disk by device path (id), label and UUID
> > > ???Net devices: assigns arbitrary stable names per (MAC address, subtype)
> > > 
> > > 5. Naming by users
> > > Disks: user can identify by any method without having to choose on a
> > > system-wide basis
> > > Net devices: user must identify by single name; policy can be overridden
> > > on a system-wide basis
> > > 
> > > I fully understand the technical reasons for differences 3-5, but why
> > > should users have to put up with it?
> > 
> > That is because network devices are not referred to by /dev/ nodes where
> > multiple symlinks would solve the naming problem.
> 
> Did you even read the last sentence?

Yes, the technical reason is the reason why users have to put up
with it :)

Re: [PATCH] udev: create empty regular files to represent net

[Greg KH]

On Thu, Oct 29, 2009 at 05:12:13PM +0000, Ben Hutchings wrote:
> On Thu, 2009-10-29 at 09:55 -0700, Greg KH wrote:
> > On Thu, Oct 29, 2009 at 04:49:35PM +0000, Ben Hutchings wrote:
> > > 3. Name assignment mechanism
> > > Disks: kernel suggests a name; udev can assign any number
> > > ???Net devices: kernel assigns a single name; udev can override it
> > > 
> > > 4. Default name assignment policy
> > > Disks: names disk by device path (id), label and UUID
> > > ???Net devices: assigns arbitrary stable names per (MAC address, subtype)
> > > 
> > > 5. Naming by users
> > > Disks: user can identify by any method without having to choose on a
> > > system-wide basis
> > > Net devices: user must identify by single name; policy can be overridden
> > > on a system-wide basis
> > > 
> > > I fully understand the technical reasons for differences 3-5, but why
> > > should users have to put up with it?
> > 
> > That is because network devices are not referred to by /dev/ nodes where
> > multiple symlinks would solve the naming problem.
> 
> Did you even read the last sentence?

Yes, the technical reason is the reason why users have to put up
with it :)

RE: [PATCH] udev: create empty regular files to represent netinterfaces

[Narendra_K]

>Sure, it's never guaranteed by the kernel that this will 
>happen, especially as we speed up the boot process by doing 
>things async.

>So again, just fix your installer, or write a new udev rule 
>for your hardware platforms, or both.  But I still fail to see 
>why multiple names for network devices _in the kernel_ is a 
>solution for your issue.
>

The char device nodes solution does not propose having multiple names
for the network interfaces _in the kernel_. It is suggesting that we
have alternate names for kernel assigned names in user space and user
space utilities refer to the interface by these alternate names. The
userspace utilities would have to map the pathnames to kernel names
before issuing the ioctls. That way there is determinism without
embedding MAC or any other attribute. An Embedded_NIC_1 interface would
always refer to the Gb1 without having to depend on any attribute.

With regards,
Narendra K 

RE: [PATCH] udev: create empty regular files to represent netinterfaces

[Narendra_K]

>Sure, it's never guaranteed by the kernel that this will 
>happen, especially as we speed up the boot process by doing 
>things async.

>So again, just fix your installer, or write a new udev rule 
>for your hardware platforms, or both.  But I still fail to see 
>why multiple names for network devices _in the kernel_ is a 
>solution for your issue.
>

The char device nodes solution does not propose having multiple names
for the network interfaces _in the kernel_. It is suggesting that we
have alternate names for kernel assigned names in user space and user
space utilities refer to the interface by these alternate names. The
userspace utilities would have to map the pathnames to kernel names
before issuing the ioctls. That way there is determinism without
embedding MAC or any other attribute. An Embedded_NIC_1 interface would
always refer to the Gb1 without having to depend on any attribute.

With regards,
Narendra K 

Re: [PATCH] udev: create empty regular files to represent net interfaces

[dann frazier]

On Thu, Oct 29, 2009 at 07:25:54AM -0700, Greg KH wrote:
> On Thu, Oct 29, 2009 at 08:11:25AM -0500, Matt Domsch wrote:
> > Netdev team - are you in agreement that having multiple names to
> > address the same netdevice is a worthwhile thing to add, to allow a
> > variety of naming schemes to exist simultaneously?  If not, this whole
> > discussion will be moot, and my basic problem, that the ethX naming
> > convention is nondeterministic, but we need determinism, remains
> > unresolved.
> 
> I'm still totally confused as to why you think this.  What is wrong with
> what we do today, which is name network devices in a deterministic
> manner by their MAC in userspace?  That name goes into the kernel, and
> everyone uses the same name and is happy.
> 
> If you don't like naming by MAC, then pick some other deterministic
> naming scheme that works for your hardware and write udev rules for it.
> 
> You could easily name them in a way that could keep the lowest number
> (eth0) for the lowest PCI id if you so desired and your BIOS guaranteed
> it.
> 
> This way the kernel has only one name, and so does userspace, and
> everyone is happy.

There are two issues, which really seem distinct to me.

Users expect eth0 to map to first-onboard-nic. That's an installer
issue (since the BIOS can already export this info) and I agree that
if we want to "fix" that, we should fix it there.

Users also want to have a name that matches the way they think of
their hardware - pci slot, bios-exposed-name, mac address,
whatever. This can be done today w/ custom udev rules, and I can
visualize an installer that would generate these rules for you:

Configure a NIC
    \-> Choose NIC by: MAC/CHASSIS-NAME/PCI-SLOT
      [ Present list of unconfigured NICs by selected property ]
      \-> What name would you like to use for this interface [eth3]?
          How do you want this configured (DHCP/STATIC/..)
          ...

That would make a lot of users much happier (myself included), but it
does restrict us into one view. At different times, admins think of
their NICs by different properties. I may want to do IP assignment by
the chassis name, but then run ethereal on a specific mac address. Or
I may want to see the routes assigned to all NICs in a given PCI
slot. Sure, I can lookup all of these properties and map them back to
an interface name by hand, but aliasing provides a nice way to
short-circuit that. And, by providing a library that translates the
aliases for us, we can help ensure that all apps that want to provide
aliasing can do so in a common way.

-- 
dann frazier

Re: [PATCH] udev: create empty regular files to represent net

[dann frazier]

On Thu, Oct 29, 2009 at 07:25:54AM -0700, Greg KH wrote:
> On Thu, Oct 29, 2009 at 08:11:25AM -0500, Matt Domsch wrote:
> > Netdev team - are you in agreement that having multiple names to
> > address the same netdevice is a worthwhile thing to add, to allow a
> > variety of naming schemes to exist simultaneously?  If not, this whole
> > discussion will be moot, and my basic problem, that the ethX naming
> > convention is nondeterministic, but we need determinism, remains
> > unresolved.
> 
> I'm still totally confused as to why you think this.  What is wrong with
> what we do today, which is name network devices in a deterministic
> manner by their MAC in userspace?  That name goes into the kernel, and
> everyone uses the same name and is happy.
> 
> If you don't like naming by MAC, then pick some other deterministic
> naming scheme that works for your hardware and write udev rules for it.
> 
> You could easily name them in a way that could keep the lowest number
> (eth0) for the lowest PCI id if you so desired and your BIOS guaranteed
> it.
> 
> This way the kernel has only one name, and so does userspace, and
> everyone is happy.

There are two issues, which really seem distinct to me.

Users expect eth0 to map to first-onboard-nic. That's an installer
issue (since the BIOS can already export this info) and I agree that
if we want to "fix" that, we should fix it there.

Users also want to have a name that matches the way they think of
their hardware - pci slot, bios-exposed-name, mac address,
whatever. This can be done today w/ custom udev rules, and I can
visualize an installer that would generate these rules for you:

Configure a NIC
    \-> Choose NIC by: MAC/CHASSIS-NAME/PCI-SLOT
      [ Present list of unconfigured NICs by selected property ]
      \-> What name would you like to use for this interface [eth3]?
          How do you want this configured (DHCP/STATIC/..)
          ...

That would make a lot of users much happier (myself included), but it
does restrict us into one view. At different times, admins think of
their NICs by different properties. I may want to do IP assignment by
the chassis name, but then run ethereal on a specific mac address. Or
I may want to see the routes assigned to all NICs in a given PCI
slot. Sure, I can lookup all of these properties and map them back to
an interface name by hand, but aliasing provides a nice way to
short-circuit that. And, by providing a library that translates the
aliases for us, we can help ensure that all apps that want to provide
aliasing can do so in a common way.

-- 
dann frazier

Re: [PATCH] udev: create empty regular files to represent netinterfaces

[dann frazier]

On Thu, Oct 29, 2009 at 10:52:52PM +0530, Narendra_K@Dell.com wrote:
> 
> >Sure, it's never guaranteed by the kernel that this will 
> >happen, especially as we speed up the boot process by doing 
> >things async.
> 
> >So again, just fix your installer, or write a new udev rule 
> >for your hardware platforms, or both.  But I still fail to see 
> >why multiple names for network devices _in the kernel_ is a 
> >solution for your issue.
> >
> 
> The char device nodes solution does not propose having multiple names
> for the network interfaces _in the kernel_.

Nor does the udev-only implementation I posted which doesn't rely on
new character devices.

-- 
dann frazier

Re: [PATCH] udev: create empty regular files to represent

[dann frazier]

On Thu, Oct 29, 2009 at 10:52:52PM +0530, Narendra_K@Dell.com wrote:
> 
> >Sure, it's never guaranteed by the kernel that this will 
> >happen, especially as we speed up the boot process by doing 
> >things async.
> 
> >So again, just fix your installer, or write a new udev rule 
> >for your hardware platforms, or both.  But I still fail to see 
> >why multiple names for network devices _in the kernel_ is a 
> >solution for your issue.
> >
> 
> The char device nodes solution does not propose having multiple names
> for the network interfaces _in the kernel_.

Nor does the udev-only implementation I posted which doesn't rely on
new character devices.

-- 
dann frazier

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Marco d'Itri]

[-- Attachment #1: Type: text/plain, Size: 324 bytes --]

On Oct 29, dann frazier <dannf@dannf.org> wrote:

> That would make a lot of users much happier (myself included), but it
> does restrict us into one view. At different times, admins think of
> their NICs by different properties. I may want to do IP assignment by
[Citation needed]

(An admin.)

-- 
ciao,
Marco

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: [PATCH] udev: create empty regular files to represent net

[Marco d'Itri]

[-- Attachment #1: Type: text/plain, Size: 324 bytes --]

On Oct 29, dann frazier <dannf@dannf.org> wrote:

> That would make a lot of users much happier (myself included), but it
> does restrict us into one view. At different times, admins think of
> their NICs by different properties. I may want to do IP assignment by
[Citation needed]

(An admin.)

-- 
ciao,
Marco

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: [PATCH] udev: create empty regular files to represent net interfaces

[dann frazier]

On Fri, Oct 30, 2009 at 04:30:29AM +0100, Marco d'Itri wrote:
> On Oct 29, dann frazier <dannf@dannf.org> wrote:
> 
> > That would make a lot of users much happier (myself included), but it
> > does restrict us into one view. At different times, admins think of
> > their NICs by different properties. I may want to do IP assignment by
> [Citation needed]

Is "I" not clear, or do you just not believe I admin servers?

-- 
dann frazier

Re: [PATCH] udev: create empty regular files to represent net

[dann frazier]

On Fri, Oct 30, 2009 at 04:30:29AM +0100, Marco d'Itri wrote:
> On Oct 29, dann frazier <dannf@dannf.org> wrote:
> 
> > That would make a lot of users much happier (myself included), but it
> > does restrict us into one view. At different times, admins think of
> > their NICs by different properties. I may want to do IP assignment by
> [Citation needed]

Is "I" not clear, or do you just not believe I admin servers?

-- 
dann frazier

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Marco d'Itri]

[-- Attachment #1: Type: text/plain, Size: 654 bytes --]

On Oct 30, dann frazier <dannf@hp.com> wrote:

> On Fri, Oct 30, 2009 at 04:30:29AM +0100, Marco d'Itri wrote:
> > On Oct 29, dann frazier <dannf@dannf.org> wrote:
> > 
> > > That would make a lot of users much happier (myself included), but it
> > > does restrict us into one view. At different times, admins think of
> > > their NICs by different properties. I may want to do IP assignment by
> > [Citation needed]
> Is "I" not clear, or do you just not believe I admin servers?
I was referring to "At different times, admins think of their NICs by
different properties", which I am not sure is a valid generalization.

-- 
ciao,
Marco

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: [PATCH] udev: create empty regular files to represent net

[Marco d'Itri]

[-- Attachment #1: Type: text/plain, Size: 654 bytes --]

On Oct 30, dann frazier <dannf@hp.com> wrote:

> On Fri, Oct 30, 2009 at 04:30:29AM +0100, Marco d'Itri wrote:
> > On Oct 29, dann frazier <dannf@dannf.org> wrote:
> > 
> > > That would make a lot of users much happier (myself included), but it
> > > does restrict us into one view. At different times, admins think of
> > > their NICs by different properties. I may want to do IP assignment by
> > [Citation needed]
> Is "I" not clear, or do you just not believe I admin servers?
I was referring to "At different times, admins think of their NICs by
different properties", which I am not sure is a valid generalization.

-- 
ciao,
Marco

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Hannes Reinecke]

Kay Sievers wrote:
> On Tue, Oct 27, 2009 at 21:55, Matt Domsch <Matt_Domsch@dell.com> wrote:
>> On Thu, Oct 22, 2009 at 12:36:20AM -0600, dann frazier wrote:
>>> Here's a proof of concept to further the discussion..
>>>
>>> The default filename uses the format:
>>>   /dev/netdev/by-ifindex/$ifindex
>>>
>>> This provides the infrastructure to permit udev rules to create aliases for
>>> network devices using symlinks, for example:
>>>
>>>   /dev/netdev/by-name/eth0 -> ../by-ifindex/1
>>>   /dev/netdev/by-biosname/LOM0 -> ../by-ifindex/3
>>>
>>> A library (such as the proposed libnetdevname) could use this information
>>> to provide an alias->realname mapping for network utilities.
>> yes, this could work, as IFINDEX is already exported in the uevents,
>> and that's the primary value udev needs to set up the mapping.
>>
>> While I like the little ifindex2name script you've got, I think udev
>> could simply call if_indextoname() to get this, and not call an
>> external program?  I suppose it could be a really really simple
>> external program too.
> 
> What's the point of all this? Why would udev ever need to find the
> name of a device by the ifindex? The device name is the primary value
> for the kernel events udev acts on.
> 
>> I'd be fine with this approach.  It has the advantages of not
>> requiring a kernel change at all, and not creating a whole character
>> device which would be useless.  And it doesn't preclude someone in the
>> future from creating a char device for network devices should they so
>> choose.
>>
>> Kay, what say you as udev owner?
> 
> That all sounds very much like something which will hit us back some
> day. I'm not sure, if udev should publish such dead text files in
> /dev, it does not seem to fit the usual APIs/assumptions where /sys
> and /dev match, and libudev provides access to both. It all sounds
> more like a database for a possible netdevname library, which does not
> need to be public in /dev, right?
> 
And to throw in some bit of useless information;

I've pondered the idea of persistent device names for network interfaces
a while back when designing the original layout of the persistent
device naming scheme.

The one reason I didn't to this was that a network interface is
_not_ a file, but rather an abstract type which is known only internally
in the kernel (ie the one exemption from the 'everything is a file'
UNIX rule).
And as udev is primarily concerned with the _files_, using it for
network interfaces would be a workaround at best.

When I were to design this, I would be implementing network interface
_aliases_, so that a network interface could be accessed either by
name or by alias. This mechanism can then be managed by udev, much
like we (ie SUSE) is using it nowadays to assign the network interface
numbers.

But the mechanism for the aliases has to live in the same instance which
also handles the network interface nowadays, ie the net subsystem of
the kernel. Implementing this in udev is _not_ the way to go.

Cheers,

Hannes

-- 
Dr. Hannes Reinecke		      zSeries & Storage
hare@suse.de			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Markus Rex, HRB 16746 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-hotplug" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Hannes Reinecke]

Kay Sievers wrote:
> On Tue, Oct 27, 2009 at 21:55, Matt Domsch <Matt_Domsch@dell.com> wrote:
>> On Thu, Oct 22, 2009 at 12:36:20AM -0600, dann frazier wrote:
>>> Here's a proof of concept to further the discussion..
>>>
>>> The default filename uses the format:
>>>   /dev/netdev/by-ifindex/$ifindex
>>>
>>> This provides the infrastructure to permit udev rules to create aliases for
>>> network devices using symlinks, for example:
>>>
>>>   /dev/netdev/by-name/eth0 -> ../by-ifindex/1
>>>   /dev/netdev/by-biosname/LOM0 -> ../by-ifindex/3
>>>
>>> A library (such as the proposed libnetdevname) could use this information
>>> to provide an alias->realname mapping for network utilities.
>> yes, this could work, as IFINDEX is already exported in the uevents,
>> and that's the primary value udev needs to set up the mapping.
>>
>> While I like the little ifindex2name script you've got, I think udev
>> could simply call if_indextoname() to get this, and not call an
>> external program?  I suppose it could be a really really simple
>> external program too.
> 
> What's the point of all this? Why would udev ever need to find the
> name of a device by the ifindex? The device name is the primary value
> for the kernel events udev acts on.
> 
>> I'd be fine with this approach.  It has the advantages of not
>> requiring a kernel change at all, and not creating a whole character
>> device which would be useless.  And it doesn't preclude someone in the
>> future from creating a char device for network devices should they so
>> choose.
>>
>> Kay, what say you as udev owner?
> 
> That all sounds very much like something which will hit us back some
> day. I'm not sure, if udev should publish such dead text files in
> /dev, it does not seem to fit the usual APIs/assumptions where /sys
> and /dev match, and libudev provides access to both. It all sounds
> more like a database for a possible netdevname library, which does not
> need to be public in /dev, right?
> 
And to throw in some bit of useless information;

I've pondered the idea of persistent device names for network interfaces
a while back when designing the original layout of the persistent
device naming scheme.

The one reason I didn't to this was that a network interface is
_not_ a file, but rather an abstract type which is known only internally
in the kernel (ie the one exemption from the 'everything is a file'
UNIX rule).
And as udev is primarily concerned with the _files_, using it for
network interfaces would be a workaround at best.

When I were to design this, I would be implementing network interface
_aliases_, so that a network interface could be accessed either by
name or by alias. This mechanism can then be managed by udev, much
like we (ie SUSE) is using it nowadays to assign the network interface
numbers.

But the mechanism for the aliases has to live in the same instance which
also handles the network interface nowadays, ie the net subsystem of
the kernel. Implementing this in udev is _not_ the way to go.

Cheers,

Hannes

-- 
Dr. Hannes Reinecke		      zSeries & Storage
hare@suse.de			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Markus Rex, HRB 16746 (AG Nürnberg)

Re: [PATCH] udev: create empty regular files to represent net interfaces

[dann frazier]

On Fri, Oct 30, 2009 at 07:22:49AM +0100, Marco d'Itri wrote:
> On Oct 30, dann frazier <dannf@hp.com> wrote:
> 
> > On Fri, Oct 30, 2009 at 04:30:29AM +0100, Marco d'Itri wrote:
> > > On Oct 29, dann frazier <dannf@dannf.org> wrote:
> > > 
> > > > That would make a lot of users much happier (myself included), but it
> > > > does restrict us into one view. At different times, admins think of
> > > > their NICs by different properties. I may want to do IP assignment by
> > > [Citation needed]
> > Is "I" not clear, or do you just not believe I admin servers?
> I was referring to "At different times, admins think of their NICs by
> different properties", which I am not sure is a valid generalization.

Fair enough, I can't speak for others.

-- 
dann frazier

Re: [PATCH] udev: create empty regular files to represent net

[dann frazier]

On Fri, Oct 30, 2009 at 07:22:49AM +0100, Marco d'Itri wrote:
> On Oct 30, dann frazier <dannf@hp.com> wrote:
> 
> > On Fri, Oct 30, 2009 at 04:30:29AM +0100, Marco d'Itri wrote:
> > > On Oct 29, dann frazier <dannf@dannf.org> wrote:
> > > 
> > > > That would make a lot of users much happier (myself included), but it
> > > > does restrict us into one view. At different times, admins think of
> > > > their NICs by different properties. I may want to do IP assignment by
> > > [Citation needed]
> > Is "I" not clear, or do you just not believe I admin servers?
> I was referring to "At different times, admins think of their NICs by
> different properties", which I am not sure is a valid generalization.

Fair enough, I can't speak for others.

-- 
dann frazier

RE: [PATCH] udev: create empty regular files to represent net interfaces

[Narendra_K]

 
>> This way the kernel has only one name, and so does userspace, and 
>> everyone is happy.
>
>There are two issues, which really seem distinct to me.
>
>Users expect eth0 to map to first-onboard-nic. That's an 
>installer issue (since the BIOS can already export this info) 
>and I agree that if we want to "fix" that, we should fix it there.
>

I agree that installers have to be fixed in the sense that they can be
told to find the right interface. But, they expect determinism and
depend on "eth0 to map to first-onboard-nic". Installer is one of the
applications that is affected by this and needs user intervention, if it
is not told about the right interface. I discussed installer as it is so
much part of a user experience.

But the real issue is "eth0 does not map to first-onboard-nic" always
and applications expecting this would break in data center environments.
Both the solutions proposed provide a way to overcome it without
introducing state.

With regards,
Narendra K

RE: [PATCH] udev: create empty regular files to represent net interfaces

[Narendra_K]

 
>> This way the kernel has only one name, and so does userspace, and 
>> everyone is happy.
>
>There are two issues, which really seem distinct to me.
>
>Users expect eth0 to map to first-onboard-nic. That's an 
>installer issue (since the BIOS can already export this info) 
>and I agree that if we want to "fix" that, we should fix it there.
>

I agree that installers have to be fixed in the sense that they can be
told to find the right interface. But, they expect determinism and
depend on "eth0 to map to first-onboard-nic". Installer is one of the
applications that is affected by this and needs user intervention, if it
is not told about the right interface. I discussed installer as it is so
much part of a user experience.

But the real issue is "eth0 does not map to first-onboard-nic" always
and applications expecting this would break in data center environments.
Both the solutions proposed provide a way to overcome it without
introducing state.

With regards,
Narendra K

Re: [PATCH] udev: create empty regular files to represent net interfaces

[dann frazier]

On Fri, Oct 30, 2009 at 08:43:44PM +0530, Narendra_K@Dell.com wrote:
>  
> >> This way the kernel has only one name, and so does userspace, and 
> >> everyone is happy.
> >
> >There are two issues, which really seem distinct to me.
> >
> >Users expect eth0 to map to first-onboard-nic. That's an 
> >installer issue (since the BIOS can already export this info) 
> >and I agree that if we want to "fix" that, we should fix it there.
> >
> 
> I agree that installers have to be fixed in the sense that they can be
> told to find the right interface. But, they expect determinism and
> depend on "eth0 to map to first-onboard-nic". Installer is one of the
> applications that is affected by this and needs user intervention, if it
> is not told about the right interface. I discussed installer as it is so
> much part of a user experience.

Right, but couldn't the installer do the work of scanning the SMBIOS
to figure out which nics are onboard, and reorder the 'eth*' names
such that these are first? This state could then be written out as
udev rules so that they persist across reboots.

> But the real issue is "eth0 does not map to first-onboard-nic" always
> and applications expecting this would break in data center environments.
> Both the solutions proposed provide a way to overcome it without
> introducing state.
> 
> With regards,
> Narendra K
> 

-- 
dann frazier

Re: [PATCH] udev: create empty regular files to represent net

[dann frazier]

On Fri, Oct 30, 2009 at 08:43:44PM +0530, Narendra_K@Dell.com wrote:
>  
> >> This way the kernel has only one name, and so does userspace, and 
> >> everyone is happy.
> >
> >There are two issues, which really seem distinct to me.
> >
> >Users expect eth0 to map to first-onboard-nic. That's an 
> >installer issue (since the BIOS can already export this info) 
> >and I agree that if we want to "fix" that, we should fix it there.
> >
> 
> I agree that installers have to be fixed in the sense that they can be
> told to find the right interface. But, they expect determinism and
> depend on "eth0 to map to first-onboard-nic". Installer is one of the
> applications that is affected by this and needs user intervention, if it
> is not told about the right interface. I discussed installer as it is so
> much part of a user experience.

Right, but couldn't the installer do the work of scanning the SMBIOS
to figure out which nics are onboard, and reorder the 'eth*' names
such that these are first? This state could then be written out as
udev rules so that they persist across reboots.

> But the real issue is "eth0 does not map to first-onboard-nic" always
> and applications expecting this would break in data center environments.
> Both the solutions proposed provide a way to overcome it without
> introducing state.
> 
> With regards,
> Narendra K
> 

-- 
dann frazier

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Bryan Kadzban]

[-- Attachment #1: Type: text/plain, Size: 1523 bytes --]

Hannes Reinecke wrote:
> And to throw in some bit of useless information;

Stirring the pot a bit myself with this message...

> The one reason I didn't to this was that a network interface is _not_
> a file, but rather an abstract type which is known only internally in
> the kernel (ie the one exemption from the 'everything is a file' UNIX
> rule).

Why?  Why not make it a file?  I've heard rumors of other Unix-like
systems that do exactly that, FWIW.

(Yes, I'm joking.  Well, maybe half-joking...  It'd be nice, but I don't
expect it to happen.)

> When I were to design this, I would be implementing network interface
> _aliases_, so that a network interface could be accessed either by 
> name or by alias. This mechanism can then be managed by udev, much 
> like we (ie SUSE) is using it nowadays to assign the network
> interface numbers.

The problem with that, if I understand what you're suggesting, is the
value of IFNAMSIZ, and the fact that it can't be made any bigger.  All
your aliases have to be IFNAMSIZ characters or less.  And that's too
short to be able to embed the same level of information as we get for
e.g. disks.  It's *barely* long enough to fit "mac-" plus 12 hex digits
(for the MAC address), but is completely incapable of holding a USB bus
path, for instance.

(Not that you'd want to use path persistence for USB devices.  But it is
possible that you'd want it for some other setup, at which point it
becomes impossible to use the same rules for USB.)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 260 bytes --]

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Bryan Kadzban]

[-- Attachment #1: Type: text/plain, Size: 1523 bytes --]

Hannes Reinecke wrote:
> And to throw in some bit of useless information;

Stirring the pot a bit myself with this message...

> The one reason I didn't to this was that a network interface is _not_
> a file, but rather an abstract type which is known only internally in
> the kernel (ie the one exemption from the 'everything is a file' UNIX
> rule).

Why?  Why not make it a file?  I've heard rumors of other Unix-like
systems that do exactly that, FWIW.

(Yes, I'm joking.  Well, maybe half-joking...  It'd be nice, but I don't
expect it to happen.)

> When I were to design this, I would be implementing network interface
> _aliases_, so that a network interface could be accessed either by 
> name or by alias. This mechanism can then be managed by udev, much 
> like we (ie SUSE) is using it nowadays to assign the network
> interface numbers.

The problem with that, if I understand what you're suggesting, is the
value of IFNAMSIZ, and the fact that it can't be made any bigger.  All
your aliases have to be IFNAMSIZ characters or less.  And that's too
short to be able to embed the same level of information as we get for
e.g. disks.  It's *barely* long enough to fit "mac-" plus 12 hex digits
(for the MAC address), but is completely incapable of holding a USB bus
path, for instance.

(Not that you'd want to use path persistence for USB devices.  But it is
possible that you'd want it for some other setup, at which point it
becomes impossible to use the same rules for USB.)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 260 bytes --]

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Stephen Hemminger]

On Fri, 30 Oct 2009 09:22:36 -0700
Bryan Kadzban <bryan@kadzban.is-a-geek.net> wrote:

> Hannes Reinecke wrote:
> > And to throw in some bit of useless information;
> 
> Stirring the pot a bit myself with this message...
> 
> > The one reason I didn't to this was that a network interface is _not_
> > a file, but rather an abstract type which is known only internally in
> > the kernel (ie the one exemption from the 'everything is a file' UNIX
> > rule).
> 
> Why?  Why not make it a file?  I've heard rumors of other Unix-like
> systems that do exactly that, FWIW.
> 
> (Yes, I'm joking.  Well, maybe half-joking...  It'd be nice, but I don't
> expect it to happen.)
> 
> > When I were to design this, I would be implementing network interface
> > _aliases_, so that a network interface could be accessed either by 
> > name or by alias. This mechanism can then be managed by udev, much 
> > like we (ie SUSE) is using it nowadays to assign the network
> > interface numbers.
> 
> The problem with that, if I understand what you're suggesting, is the
> value of IFNAMSIZ, and the fact that it can't be made any bigger.  All
> your aliases have to be IFNAMSIZ characters or less.  And that's too
> short to be able to embed the same level of information as we get for
> e.g. disks.  It's *barely* long enough to fit "mac-" plus 12 hex digits
> (for the MAC address), but is completely incapable of holding a USB bus
> path, for instance.
> 
> (Not that you'd want to use path persistence for USB devices.  But it is
> possible that you'd want it for some other setup, at which point it
> becomes impossible to use the same rules for USB.)

Not a big fan of multiple names, it is the wrong solution to the human
question of "what is eth0 really?". Router o/s use description field
for that kind of information.

I added ifalias to provide place to put user visible description information.
It is in latest kernels via sysfs and iproute utilities.  Also plan to add
support for it in net-snmp.

-- 

Re: [PATCH] udev: create empty regular files to represent net

[Stephen Hemminger]

On Fri, 30 Oct 2009 09:22:36 -0700
Bryan Kadzban <bryan@kadzban.is-a-geek.net> wrote:

> Hannes Reinecke wrote:
> > And to throw in some bit of useless information;
> 
> Stirring the pot a bit myself with this message...
> 
> > The one reason I didn't to this was that a network interface is _not_
> > a file, but rather an abstract type which is known only internally in
> > the kernel (ie the one exemption from the 'everything is a file' UNIX
> > rule).
> 
> Why?  Why not make it a file?  I've heard rumors of other Unix-like
> systems that do exactly that, FWIW.
> 
> (Yes, I'm joking.  Well, maybe half-joking...  It'd be nice, but I don't
> expect it to happen.)
> 
> > When I were to design this, I would be implementing network interface
> > _aliases_, so that a network interface could be accessed either by 
> > name or by alias. This mechanism can then be managed by udev, much 
> > like we (ie SUSE) is using it nowadays to assign the network
> > interface numbers.
> 
> The problem with that, if I understand what you're suggesting, is the
> value of IFNAMSIZ, and the fact that it can't be made any bigger.  All
> your aliases have to be IFNAMSIZ characters or less.  And that's too
> short to be able to embed the same level of information as we get for
> e.g. disks.  It's *barely* long enough to fit "mac-" plus 12 hex digits
> (for the MAC address), but is completely incapable of holding a USB bus
> path, for instance.
> 
> (Not that you'd want to use path persistence for USB devices.  But it is
> possible that you'd want it for some other setup, at which point it
> becomes impossible to use the same rules for USB.)

Not a big fan of multiple names, it is the wrong solution to the human
question of "what is eth0 really?". Router o/s use description field
for that kind of information.

I added ifalias to provide place to put user visible description information.
It is in latest kernels via sysfs and iproute utilities.  Also plan to add
support for it in net-snmp.

-- 

RE: [PATCH] udev: create empty regular files to represent netinterfaces

[Narendra_K]

>> >There are two issues, which really seem distinct to me.
>> >
>> >Users expect eth0 to map to first-onboard-nic. That's an installer 
>> >issue (since the BIOS can already export this info) and I 
>agree that 
>> >if we want to "fix" that, we should fix it there.
>> >
>> 
>> I agree that installers have to be fixed in the sense that 
>they can be 
>> told to find the right interface. But, they expect determinism and 
>> depend on "eth0 to map to first-onboard-nic". Installer is 
>one of the 
>> applications that is affected by this and needs user 
>intervention, if 
>> it is not told about the right interface. I discussed 
>installer as it 
>> is so much part of a user experience.
>
>Right, but couldn't the installer do the work of scanning the 
>SMBIOS to figure out which nics are onboard, and reorder the 
>'eth*' names such that these are first? This state could then 
>be written out as udev rules so that they persist across reboots.
>

I suppose, with udev loading modules, the rules generated at runtime
could run into the problem of duplicate names, if names are reordered in
the kernel namespace. (I.e the eth* namespace). Hence idea of an
alternate namespace.

With regards,
Narendra K

RE: [PATCH] udev: create empty regular files to represent netinterfaces

[Narendra_K]

>> >There are two issues, which really seem distinct to me.
>> >
>> >Users expect eth0 to map to first-onboard-nic. That's an installer 
>> >issue (since the BIOS can already export this info) and I 
>agree that 
>> >if we want to "fix" that, we should fix it there.
>> >
>> 
>> I agree that installers have to be fixed in the sense that 
>they can be 
>> told to find the right interface. But, they expect determinism and 
>> depend on "eth0 to map to first-onboard-nic". Installer is 
>one of the 
>> applications that is affected by this and needs user 
>intervention, if 
>> it is not told about the right interface. I discussed 
>installer as it 
>> is so much part of a user experience.
>
>Right, but couldn't the installer do the work of scanning the 
>SMBIOS to figure out which nics are onboard, and reorder the 
>'eth*' names such that these are first? This state could then 
>be written out as udev rules so that they persist across reboots.
>

I suppose, with udev loading modules, the rules generated at runtime
could run into the problem of duplicate names, if names are reordered in
the kernel namespace. (I.e the eth* namespace). Hence idea of an
alternate namespace.

With regards,
Narendra K

Re: [PATCH] udev: create empty regular files to represent netinterfaces

[dann frazier]

On Fri, Oct 30, 2009 at 10:23:57PM +0530, Narendra_K@Dell.com wrote:
> 
> >> >There are two issues, which really seem distinct to me.
> >> >
> >> >Users expect eth0 to map to first-onboard-nic. That's an installer 
> >> >issue (since the BIOS can already export this info) and I 
> >agree that 
> >> >if we want to "fix" that, we should fix it there.
> >> >
> >> 
> >> I agree that installers have to be fixed in the sense that 
> >they can be 
> >> told to find the right interface. But, they expect determinism and 
> >> depend on "eth0 to map to first-onboard-nic". Installer is 
> >one of the 
> >> applications that is affected by this and needs user 
> >intervention, if 
> >> it is not told about the right interface. I discussed 
> >installer as it 
> >> is so much part of a user experience.
> >
> >Right, but couldn't the installer do the work of scanning the 
> >SMBIOS to figure out which nics are onboard, and reorder the 
> >'eth*' names such that these are first? This state could then 
> >be written out as udev rules so that they persist across reboots.
> >
> 
> I suppose, with udev loading modules, the rules generated at runtime
> could run into the problem of duplicate names, if names are reordered in
> the kernel namespace. (I.e the eth* namespace). Hence idea of an
> alternate namespace.

I don't see a risk of duplicate names - after all drivers are loaded,
the installer can take the names enumerated by the kernel, figure out
what it thinks a preferrable order is (i.e. by querying SMBIOS), then
change the kernel names/mac mapping appropriately. Where can a
duplicate name become an issue using this method?

-- 
dann frazier

Re: [PATCH] udev: create empty regular files to represent

[dann frazier]

On Fri, Oct 30, 2009 at 10:23:57PM +0530, Narendra_K@Dell.com wrote:
> 
> >> >There are two issues, which really seem distinct to me.
> >> >
> >> >Users expect eth0 to map to first-onboard-nic. That's an installer 
> >> >issue (since the BIOS can already export this info) and I 
> >agree that 
> >> >if we want to "fix" that, we should fix it there.
> >> >
> >> 
> >> I agree that installers have to be fixed in the sense that 
> >they can be 
> >> told to find the right interface. But, they expect determinism and 
> >> depend on "eth0 to map to first-onboard-nic". Installer is 
> >one of the 
> >> applications that is affected by this and needs user 
> >intervention, if 
> >> it is not told about the right interface. I discussed 
> >installer as it 
> >> is so much part of a user experience.
> >
> >Right, but couldn't the installer do the work of scanning the 
> >SMBIOS to figure out which nics are onboard, and reorder the 
> >'eth*' names such that these are first? This state could then 
> >be written out as udev rules so that they persist across reboots.
> >
> 
> I suppose, with udev loading modules, the rules generated at runtime
> could run into the problem of duplicate names, if names are reordered in
> the kernel namespace. (I.e the eth* namespace). Hence idea of an
> alternate namespace.

I don't see a risk of duplicate names - after all drivers are loaded,
the installer can take the names enumerated by the kernel, figure out
what it thinks a preferrable order is (i.e. by querying SMBIOS), then
change the kernel names/mac mapping appropriately. Where can a
duplicate name become an issue using this method?

-- 
dann frazier

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Matt Domsch]

On Fri, Oct 30, 2009 at 10:08:45AM -0600, dann frazier wrote:
> On Fri, Oct 30, 2009 at 08:43:44PM +0530, Narendra_K@Dell.com wrote:
> >  
> > >> This way the kernel has only one name, and so does userspace, and 
> > >> everyone is happy.
> > >
> > >There are two issues, which really seem distinct to me.
> > >
> > >Users expect eth0 to map to first-onboard-nic. That's an 
> > >installer issue (since the BIOS can already export this info) 
> > >and I agree that if we want to "fix" that, we should fix it there.
> > >
> > 
> > I agree that installers have to be fixed in the sense that they can be
> > told to find the right interface. But, they expect determinism and
> > depend on "eth0 to map to first-onboard-nic". Installer is one of the
> > applications that is affected by this and needs user intervention, if it
> > is not told about the right interface. I discussed installer as it is so
> > much part of a user experience.
> 
> Right, but couldn't the installer do the work of scanning the SMBIOS
> to figure out which nics are onboard, and reorder the 'eth*' names
> such that these are first? This state could then be written out as
> udev rules so that they persist across reboots.

No, there is a catch-22.  To be sure you know the "proper" ethN name
to assign a device based on an ordering, you have to know about all
the devices.  When udev runs, one device at a time, it can only see
the current device and all those that have come before it, but it can't know
when all the drivers for all the NICs have been loaded.  And if you
hotplug a device in later, it should presumably just go at the end of
the list, but after a reboot, it'll most likely show up somewhere in
the middle of the list.  SMBIOS is static from boottime, not hotplug
aware. If I add a 4-port NIC in slot 3 after boot, it becomes
ethN..N+3.  After reboot, it may well show up at completely different
places, and even the N..N+3 ordering of individiual ports on the card
aren't guaranteed to be consistent.

ethN is fundamentally a nondeterministic namespace, and trying to
enforce determinism on it is, from all my attempts, impossible.  Hence
the desire to change the namespace.  But there can be many
different naming policies one might want (including the
nondeterministic ethN policy), and for all other types of devices this
isn't a problem - we can have all the policies we want, in parallel.
Only for network devices we can't.

Stephen, I hadn't seen the ifalias field you added.  I can see that
being helpful to a user (some tool can write a more meaningful string
to it), but I can't see it being useful programmatically.  It still
doesn't get me to "ifconfig the NIC in slot 3 port 2" or "ifconfig the
NIC I booted from".

Thanks,
Matt

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Matt Domsch]

On Fri, Oct 30, 2009 at 10:08:45AM -0600, dann frazier wrote:
> On Fri, Oct 30, 2009 at 08:43:44PM +0530, Narendra_K@Dell.com wrote:
> >  
> > >> This way the kernel has only one name, and so does userspace, and 
> > >> everyone is happy.
> > >
> > >There are two issues, which really seem distinct to me.
> > >
> > >Users expect eth0 to map to first-onboard-nic. That's an 
> > >installer issue (since the BIOS can already export this info) 
> > >and I agree that if we want to "fix" that, we should fix it there.
> > >
> > 
> > I agree that installers have to be fixed in the sense that they can be
> > told to find the right interface. But, they expect determinism and
> > depend on "eth0 to map to first-onboard-nic". Installer is one of the
> > applications that is affected by this and needs user intervention, if it
> > is not told about the right interface. I discussed installer as it is so
> > much part of a user experience.
> 
> Right, but couldn't the installer do the work of scanning the SMBIOS
> to figure out which nics are onboard, and reorder the 'eth*' names
> such that these are first? This state could then be written out as
> udev rules so that they persist across reboots.

No, there is a catch-22.  To be sure you know the "proper" ethN name
to assign a device based on an ordering, you have to know about all
the devices.  When udev runs, one device at a time, it can only see
the current device and all those that have come before it, but it can't know
when all the drivers for all the NICs have been loaded.  And if you
hotplug a device in later, it should presumably just go at the end of
the list, but after a reboot, it'll most likely show up somewhere in
the middle of the list.  SMBIOS is static from boottime, not hotplug
aware. If I add a 4-port NIC in slot 3 after boot, it becomes
ethN..N+3.  After reboot, it may well show up at completely different
places, and even the N..N+3 ordering of individiual ports on the card
aren't guaranteed to be consistent.

ethN is fundamentally a nondeterministic namespace, and trying to
enforce determinism on it is, from all my attempts, impossible.  Hence
the desire to change the namespace.  But there can be many
different naming policies one might want (including the
nondeterministic ethN policy), and for all other types of devices this
isn't a problem - we can have all the policies we want, in parallel.
Only for network devices we can't.

Stephen, I hadn't seen the ifalias field you added.  I can see that
being helpful to a user (some tool can write a more meaningful string
to it), but I can't see it being useful programmatically.  It still
doesn't get me to "ifconfig the NIC in slot 3 port 2" or "ifconfig the
NIC I booted from".

Thanks,
Matt

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: [PATCH] udev: create empty regular files to represent net interfaces

[Greg KH]

On Fri, Oct 30, 2009 at 12:10:03PM -0500, Matt Domsch wrote:
> ethN is fundamentally a nondeterministic namespace, and trying to
> enforce determinism on it is, from all my attempts, impossible.  Hence
> the desire to change the namespace.  But there can be many
> different naming policies one might want (including the
> nondeterministic ethN policy), and for all other types of devices this
> isn't a problem - we can have all the policies we want, in parallel.
> Only for network devices we can't.

So pick one in your installer and stick with it.  Doesn't seem that
complicated to me...

greg k-h

Re: [PATCH] udev: create empty regular files to represent net

[Greg KH]

On Fri, Oct 30, 2009 at 12:10:03PM -0500, Matt Domsch wrote:
> ethN is fundamentally a nondeterministic namespace, and trying to
> enforce determinism on it is, from all my attempts, impossible.  Hence
> the desire to change the namespace.  But there can be many
> different naming policies one might want (including the
> nondeterministic ethN policy), and for all other types of devices this
> isn't a problem - we can have all the policies we want, in parallel.
> Only for network devices we can't.

So pick one in your installer and stick with it.  Doesn't seem that
complicated to me...

greg k-h

RE: PATCH: Network Device Naming mechanism and policy

[Narendra_K]

>>> Matt, Ben and I talked about a few other possibilities on IRC. The 
>>> one I like the most at the moment is an idea Ben had to creat dummy 
>>> files named after the ifindex. Then, use symlinks for the 
>kernel name 
>>> and the various by-$property subdirectories. This means the KOBJ 
>>> events will need to expose the ifindex.
>>> 
>> 
>> I suppose the KOBJ events already expose the ifindex of a network 
>> interface. The file "/sys/class/net/ethN/uevent" contains 
>> INTERFACE=ethN and IFINDEX=n already. But it looks like udev doesn't 
>> use it in any way.
>
>Right; it could simply do the equivalent of:
>
>touch /dev/netdev/$env{IFINDEX}
>
>instead of its normal mknod(2), and then do normal SYMLINK processing.
>That last part is what would link 
>/dev/netdev/by-name/$env{INTERFACE} to that device, along with 
>/dev/netdev/by-mac/*, /dev/netdev/by-path/*, etc., etc., in as 
>many different ways as people want to add rules.
>
>(Or /dev/net/by-* instead of netdev; I'm mostly ambivalent 
>about the first-level directory under /dev.  Looks like 
>libnetdevname requires /dev/netdev though.)
>
>> For example, with the kernel patch the "/sys/class/net/ethN/uevent" 
>> contains in addition to the above details, MAJOR=M and MINOR=m which 
>> the udev knows how to make use of with a rule like
>> 
>> SUBSYSTEM=="net", KERNEL!="tun", NAME="netdev/%k", MODE="0600".
>
>And if the only point is to get the ifindex via stat(2) on the 
>resulting symlinks, but people don't like device files, then 
>why not get the ifindex via readlink(2) (and a bit of string 
>parsing, and a strtol(3) or
>strtoul(3) call) instead?  :-)


I suppose this issue can also be addressed in another way. Currently,
the sysfs contains various attributes of a network interface under the
directory "/sys/class/net/ethN", for example
"/sys/class/net/ethN/address". This will be used by udev as below -

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="00:1d:09:6a:78:ec", ATTR{type}=="1", KERNEL=="eth*",
NAME="eth1".

Similarly, export an attribute named "smbios_name" to sysfs, i.e
"/sys/class/net/eth0/smbios_name". "Cat /sys/class/net/eth0/smbios_name"
would show "Embedded_NIC_1[23..]" and this can be used by udev in
70-persistent-net.rules as 

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{smbios_name}=="Embedded_NIC_1", ATTR{type}=="1", KERNEL=="eth*",
NAME="eth0".

I suppose this would not need any changes to the udev code and existing
udev infrastructure can be used as udev is capable handling
ATTR{something}.

This would also ensure that whichever device is "Embedded_NIC_1" as per
the BIOS, will also be "eth0" in the os.

Netdev, What are your views on this idea ?

With regards,
Narendra K  

RE: PATCH: Network Device Naming mechanism and policy

[Narendra_K]

>>> Matt, Ben and I talked about a few other possibilities on IRC. The 
>>> one I like the most at the moment is an idea Ben had to creat dummy 
>>> files named after the ifindex. Then, use symlinks for the 
>kernel name 
>>> and the various by-$property subdirectories. This means the KOBJ 
>>> events will need to expose the ifindex.
>>> 
>> 
>> I suppose the KOBJ events already expose the ifindex of a network 
>> interface. The file "/sys/class/net/ethN/uevent" contains 
>> INTERFACE=ethN and IFINDEX=n already. But it looks like udev doesn't 
>> use it in any way.
>
>Right; it could simply do the equivalent of:
>
>touch /dev/netdev/$env{IFINDEX}
>
>instead of its normal mknod(2), and then do normal SYMLINK processing.
>That last part is what would link 
>/dev/netdev/by-name/$env{INTERFACE} to that device, along with 
>/dev/netdev/by-mac/*, /dev/netdev/by-path/*, etc., etc., in as 
>many different ways as people want to add rules.
>
>(Or /dev/net/by-* instead of netdev; I'm mostly ambivalent 
>about the first-level directory under /dev.  Looks like 
>libnetdevname requires /dev/netdev though.)
>
>> For example, with the kernel patch the "/sys/class/net/ethN/uevent" 
>> contains in addition to the above details, MAJOR=M and MINOR=m which 
>> the udev knows how to make use of with a rule like
>> 
>> SUBSYSTEM="net", KERNEL!="tun", NAME="netdev/%k", MODE="0600".
>
>And if the only point is to get the ifindex via stat(2) on the 
>resulting symlinks, but people don't like device files, then 
>why not get the ifindex via readlink(2) (and a bit of string 
>parsing, and a strtol(3) or
>strtoul(3) call) instead?  :-)


I suppose this issue can also be addressed in another way. Currently,
the sysfs contains various attributes of a network interface under the
directory "/sys/class/net/ethN", for example
"/sys/class/net/ethN/address". This will be used by udev as below -

SUBSYSTEM="net", ACTION="add", DRIVERS="?*",
ATTR{address}="00:1d:09:6a:78:ec", ATTR{type}="1", KERNEL="eth*",
NAME="eth1".

Similarly, export an attribute named "smbios_name" to sysfs, i.e
"/sys/class/net/eth0/smbios_name". "Cat /sys/class/net/eth0/smbios_name"
would show "Embedded_NIC_1[23..]" and this can be used by udev in
70-persistent-net.rules as 

SUBSYSTEM="net", ACTION="add", DRIVERS="?*",
ATTR{smbios_name}="Embedded_NIC_1", ATTR{type}="1", KERNEL="eth*",
NAME="eth0".

I suppose this would not need any changes to the udev code and existing
udev infrastructure can be used as udev is capable handling
ATTR{something}.

This would also ensure that whichever device is "Embedded_NIC_1" as per
the BIOS, will also be "eth0" in the os.

Netdev, What are your views on this idea ?

With regards,
Narendra K  

Re: PATCH: Network Device Naming mechanism and policy

[Marco d'Itri]

On Nov 04, Narendra_K@Dell.com wrote:

> SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
> ATTR{smbios_name}=="Embedded_NIC_1", ATTR{type}=="1", KERNEL=="eth*",
> NAME="eth0".
As a distribution developer I highly value solutions like this which do
not require patching every application which deals with interface names
and then teaching users about aliases which only work in some places and
are unknown to the kernel.

-- 
ciao,
Marco

Re: PATCH: Network Device Naming mechanism and policy

[Marco d'Itri]

On Nov 04, Narendra_K@Dell.com wrote:

> SUBSYSTEM="net", ACTION="add", DRIVERS="?*",
> ATTR{smbios_name}="Embedded_NIC_1", ATTR{type}="1", KERNEL="eth*",
> NAME="eth0".
As a distribution developer I highly value solutions like this which do
not require patching every application which deals with interface names
and then teaching users about aliases which only work in some places and
are unknown to the kernel.

-- 
ciao,
Marco

Re: PATCH: Network Device Naming mechanism and policy

[Domsch, Matt]

On Wed, Nov 04, 2009 at 08:23:38AM -0600, K, Narendra wrote:
> Similarly, export an attribute named "smbios_name" to sysfs, i.e
> "/sys/class/net/eth0/smbios_name". "Cat /sys/class/net/eth0/smbios_name"
> would show "Embedded_NIC_1[23..]" and this can be used by udev in
> 70-persistent-net.rules as 
> 
> SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
> ATTR{smbios_name}=="Embedded_NIC_1", ATTR{type}=="1", KERNEL=="eth*",
> NAME="eth0".
> 
> I suppose this would not need any changes to the udev code and existing
> udev infrastructure can be used as udev is capable handling
> ATTR{something}.
> 
> This would also ensure that whichever device is "Embedded_NIC_1" as per
> the BIOS, will also be "eth0" in the os.

We can grab the smbios_name value using biosdevname in a PROGRAM= part
of the udev rule.  But it doesn't actually solve the problem.  We
haven't changed the network device naming scheme from "eth%d" to
something else.  Therefore, by having rules which simply try to
re-order names within that scheme, when they're being enumerated in
parallel and racing, we get collisions.  Take for example, this which
tries to rename the 4 onboard NICs in a particular order, in the
absence of any other rules:

PROGRAM="/sbin/biosdevname --policy=smbios_names -i %k", RESULT=="Embedded NIC 1", NAME="eth0"
PROGRAM="/sbin/biosdevname --policy=smbios_names -i %k", RESULT=="Embedded NIC 2", NAME="eth1"
PROGRAM="/sbin/biosdevname --policy=smbios_names -i %k", RESULT=="Embedded NIC 3", NAME="eth2"
PROGRAM="/sbin/biosdevname --policy=smbios_names -i %k", RESULT=="Embedded NIC 4", NAME="eth3"

I wind up with instead this in ifconfig -a:

eth0        00:1B:21:42:66:30  
eth1        00:1B:21:42:66:31  
eth2        00:22:19:59:8E:5A  
eth2_rename 00:22:19:59:8E:56  
eth3        00:22:19:59:8E:5C  
eth3_rename 00:22:19:59:8E:58  

When what I would have expected would have been:

eth0 00:22:19:59:8E:56
eth1 00:22:19:59:8E:58
eth2 00:22:19:59:8E:5A
eth3 00:22:19:59:8E:5C
eth4 00:1B:21:42:66:30  
eth5 00:1B:21:42:66:31  


I can't use eth%d as the scheme - that's the kernel's scheme.  I have
to switch the scheme to something else.


-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Domsch, Matt]

On Wed, Nov 04, 2009 at 08:23:38AM -0600, K, Narendra wrote:
> Similarly, export an attribute named "smbios_name" to sysfs, i.e
> "/sys/class/net/eth0/smbios_name". "Cat /sys/class/net/eth0/smbios_name"
> would show "Embedded_NIC_1[23..]" and this can be used by udev in
> 70-persistent-net.rules as 
> 
> SUBSYSTEM="net", ACTION="add", DRIVERS="?*",
> ATTR{smbios_name}="Embedded_NIC_1", ATTR{type}="1", KERNEL="eth*",
> NAME="eth0".
> 
> I suppose this would not need any changes to the udev code and existing
> udev infrastructure can be used as udev is capable handling
> ATTR{something}.
> 
> This would also ensure that whichever device is "Embedded_NIC_1" as per
> the BIOS, will also be "eth0" in the os.

We can grab the smbios_name value using biosdevname in a PROGRAM= part
of the udev rule.  But it doesn't actually solve the problem.  We
haven't changed the network device naming scheme from "eth%d" to
something else.  Therefore, by having rules which simply try to
re-order names within that scheme, when they're being enumerated in
parallel and racing, we get collisions.  Take for example, this which
tries to rename the 4 onboard NICs in a particular order, in the
absence of any other rules:

PROGRAM="/sbin/biosdevname --policy=smbios_names -i %k", RESULT="Embedded NIC 1", NAME="eth0"
PROGRAM="/sbin/biosdevname --policy=smbios_names -i %k", RESULT="Embedded NIC 2", NAME="eth1"
PROGRAM="/sbin/biosdevname --policy=smbios_names -i %k", RESULT="Embedded NIC 3", NAME="eth2"
PROGRAM="/sbin/biosdevname --policy=smbios_names -i %k", RESULT="Embedded NIC 4", NAME="eth3"

I wind up with instead this in ifconfig -a:

eth0        00:1B:21:42:66:30  
eth1        00:1B:21:42:66:31  
eth2        00:22:19:59:8E:5A  
eth2_rename 00:22:19:59:8E:56  
eth3        00:22:19:59:8E:5C  
eth3_rename 00:22:19:59:8E:58  

When what I would have expected would have been:

eth0 00:22:19:59:8E:56
eth1 00:22:19:59:8E:58
eth2 00:22:19:59:8E:5A
eth3 00:22:19:59:8E:5C
eth4 00:1B:21:42:66:30  
eth5 00:1B:21:42:66:31  


I can't use eth%d as the scheme - that's the kernel's scheme.  I have
to switch the scheme to something else.


-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Fri, Nov 06, 2009 at 09:49:21AM +0100, Marco d'Itri wrote:
> On Nov 04, Narendra_K@Dell.com wrote:
> 
> > SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
> > ATTR{smbios_name}=="Embedded_NIC_1", ATTR{type}=="1", KERNEL=="eth*",
> > NAME="eth0".
> As a distribution developer I highly value solutions like this which do
> not require patching every application which deals with interface names
> and then teaching users about aliases which only work in some places and
> are unknown to the kernel.

Fair enough - but would you object if we changed the naming scheme
from eth%d to something else?

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Fri, Nov 06, 2009 at 09:49:21AM +0100, Marco d'Itri wrote:
> On Nov 04, Narendra_K@Dell.com wrote:
> 
> > SUBSYSTEM="net", ACTION="add", DRIVERS="?*",
> > ATTR{smbios_name}="Embedded_NIC_1", ATTR{type}="1", KERNEL="eth*",
> > NAME="eth0".
> As a distribution developer I highly value solutions like this which do
> not require patching every application which deals with interface names
> and then teaching users about aliases which only work in some places and
> are unknown to the kernel.

Fair enough - but would you object if we changed the naming scheme
from eth%d to something else?

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Marco d'Itri]

[-- Attachment #1: Type: text/plain, Size: 1284 bytes --]

On Nov 06, Matt Domsch <Matt_Domsch@Dell.com> wrote:

> > As a distribution developer I highly value solutions like this which do
> > not require patching every application which deals with interface names
> > and then teaching users about aliases which only work in some places and
> > are unknown to the kernel.
> Fair enough - but would you object if we changed the naming scheme
> from eth%d to something else?
I suppose that this would depend on what else. :-)
Since you want radical changes I recommend that you design the new
persistent naming infrastructure in a way that will allow root to choose
to use the classic naming scheme, or many users will scream a lot and at
least some distributions will do it anyway.
I also expect that providing choice at the beginning of development may
lead to more acceptance later if and when the new scheme will have
proved itself to be superior (at least in some situations).
You have tought about this for a long time and if so far you have not
found a solution which is widely considered superior then I doubt that
one will appear soon. Providing your favourite naming scheme as an
optional add on will immediately benefit those who like it and greatly
reduce opposition from those who do not.

-- 
ciao,
Marco

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[Marco d'Itri]

[-- Attachment #1: Type: text/plain, Size: 1284 bytes --]

On Nov 06, Matt Domsch <Matt_Domsch@Dell.com> wrote:

> > As a distribution developer I highly value solutions like this which do
> > not require patching every application which deals with interface names
> > and then teaching users about aliases which only work in some places and
> > are unknown to the kernel.
> Fair enough - but would you object if we changed the naming scheme
> from eth%d to something else?
I suppose that this would depend on what else. :-)
Since you want radical changes I recommend that you design the new
persistent naming infrastructure in a way that will allow root to choose
to use the classic naming scheme, or many users will scream a lot and at
least some distributions will do it anyway.
I also expect that providing choice at the beginning of development may
lead to more acceptance later if and when the new scheme will have
proved itself to be superior (at least in some situations).
You have tought about this for a long time and if so far you have not
found a solution which is widely considered superior then I doubt that
one will appear soon. Providing your favourite naming scheme as an
optional add on will immediately benefit those who like it and greatly
reduce opposition from those who do not.

-- 
ciao,
Marco

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[dann frazier]

On Fri, Nov 06, 2009 at 11:35:24PM +0100, Marco d'Itri wrote:
> On Nov 06, Matt Domsch <Matt_Domsch@Dell.com> wrote:
> 
> > > As a distribution developer I highly value solutions like this which do
> > > not require patching every application which deals with interface names
> > > and then teaching users about aliases which only work in some places and
> > > are unknown to the kernel.
> > Fair enough - but would you object if we changed the naming scheme
> > from eth%d to something else?
> I suppose that this would depend on what else. :-)
> Since you want radical changes I recommend that you design the new
> persistent naming infrastructure in a way that will allow root to choose
> to use the classic naming scheme, or many users will scream a lot and at
> least some distributions will do it anyway.
> I also expect that providing choice at the beginning of development may
> lead to more acceptance later if and when the new scheme will have
> proved itself to be superior (at least in some situations).
> You have tought about this for a long time and if so far you have not
> found a solution which is widely considered superior then I doubt that
> one will appear soon. Providing your favourite naming scheme as an
> optional add on will immediately benefit those who like it and greatly
> reduce opposition from those who do not.

This seems to me like a good installer feature - give the user an
option to enter a name for an interface, with the default option
to use the eth* names. To illustrate by example, I imagine an
installer flow that looks like this:

 [Do Hardware Discovery]
 [Automatically reorder kernel names for reasonable defaults;
  eth0-eth{n-1} map to n onboard nics]

  Sample user interface for network configuration:

 ------------Choose an interface to configure --------------
 | Multiple unconfigured interfaces detected.              |
 | Select an interface to configure by:                    |
 |   1. Kernel name (eth0, eth1, etc)                      |
 |   2. Mac Address                                        |
 |   3. Chassis name                                       |
 |   4. PCI Slot                                           |
 -----------------------------------------------------------

 ----Choose an interface to configure (by chassis name)-----
 |   1. LOM0                                               |
 |   2. LOM1                                               |
 |   3. Undefined                                          |
 |   4. Undefined                                          |
 -----------------------------------------------------------

 ----------------Name interface - (chassis name LOM0)-------
 |   Name to use for this interface [eth0]: __mynet0_      |
 -----------------------------------------------------------

 -----------------------------------------------------------
 | Configure interface - mynet0                            |
 |   1. DHCP                                               |
 |   2. Static                                             |
 |   ...                                                   |
 -----------------------------------------------------------
 
[Generate udev rules that bind the user-selected name to
 the user-selected attribute]

Re: PATCH: Network Device Naming mechanism and policy

[dann frazier]

On Fri, Nov 06, 2009 at 11:35:24PM +0100, Marco d'Itri wrote:
> On Nov 06, Matt Domsch <Matt_Domsch@Dell.com> wrote:
> 
> > > As a distribution developer I highly value solutions like this which do
> > > not require patching every application which deals with interface names
> > > and then teaching users about aliases which only work in some places and
> > > are unknown to the kernel.
> > Fair enough - but would you object if we changed the naming scheme
> > from eth%d to something else?
> I suppose that this would depend on what else. :-)
> Since you want radical changes I recommend that you design the new
> persistent naming infrastructure in a way that will allow root to choose
> to use the classic naming scheme, or many users will scream a lot and at
> least some distributions will do it anyway.
> I also expect that providing choice at the beginning of development may
> lead to more acceptance later if and when the new scheme will have
> proved itself to be superior (at least in some situations).
> You have tought about this for a long time and if so far you have not
> found a solution which is widely considered superior then I doubt that
> one will appear soon. Providing your favourite naming scheme as an
> optional add on will immediately benefit those who like it and greatly
> reduce opposition from those who do not.

This seems to me like a good installer feature - give the user an
option to enter a name for an interface, with the default option
to use the eth* names. To illustrate by example, I imagine an
installer flow that looks like this:

 [Do Hardware Discovery]
 [Automatically reorder kernel names for reasonable defaults;
  eth0-eth{n-1} map to n onboard nics]

  Sample user interface for network configuration:

 ------------Choose an interface to configure --------------
 | Multiple unconfigured interfaces detected.              |
 | Select an interface to configure by:                    |
 |   1. Kernel name (eth0, eth1, etc)                      |
 |   2. Mac Address                                        |
 |   3. Chassis name                                       |
 |   4. PCI Slot                                           |
 -----------------------------------------------------------

 ----Choose an interface to configure (by chassis name)-----
 |   1. LOM0                                               |
 |   2. LOM1                                               |
 |   3. Undefined                                          |
 |   4. Undefined                                          |
 -----------------------------------------------------------

 ----------------Name interface - (chassis name LOM0)-------
 |   Name to use for this interface [eth0]: __mynet0_      |
 -----------------------------------------------------------

 -----------------------------------------------------------
 | Configure interface - mynet0                            |
 |   1. DHCP                                               |
 |   2. Static                                             |
 |   ...                                                   |
 -----------------------------------------------------------
 
[Generate udev rules that bind the user-selected name to
 the user-selected attribute]

RE: PATCH: Network Device Naming mechanism and policy

[Narendra_K]

>> > As a distribution developer I highly value solutions like 
>this which 
>> > do not require patching every application which deals with 
>interface 
>> > names and then teaching users about aliases which only 
>work in some 
>> > places and are unknown to the kernel.
>> Fair enough - but would you object if we changed the naming scheme 
>> from eth%d to something else?
>I suppose that this would depend on what else. :-) Since you 
>want radical changes I recommend that you design the new 
>persistent naming infrastructure in a way that will allow root 
>to choose to use the classic naming scheme, or many users will 
>scream a lot and at least some distributions will do it anyway.
>I also expect that providing choice at the beginning of 
>development may lead to more acceptance later if and when the 
>new scheme will have proved itself to be superior (at least in 
>some situations).
>You have tought about this for a long time and if so far you 
>have not found a solution which is widely considered superior 
>then I doubt that one will appear soon. Providing your 
>favourite naming scheme as an optional add on will immediately 
>benefit those who like it and greatly reduce opposition from 
>those who do not.

In that way, I suppose char device node solution fits the scheme
perfectly. It doesn't change or interfere with the kernel's default
naming scheme (ethN) in any way. Also, the applications continue to work
the way they did and in addition to supporting traditional names, they
would also support pathnames. Whether all the user space applications
need to be patched can be discussed and debated. But, we can patch
applications like, installers and firewall code, which when don't see
determinism ("eth0 mapping to integrated port 1"), fail and cause very
high impact could be patched. Since users are already familiar with
pathnames like /dev/disk/by-id{label, uuid}, I suppose it might not be
very difficult to get used to pathnames like
/dev/netdev/by-chassis-label/Embedded_NIC_1. Would that be acceptable ?


With regards,
Narendra K  

RE: PATCH: Network Device Naming mechanism and policy

[Narendra_K]

>> > As a distribution developer I highly value solutions like 
>this which 
>> > do not require patching every application which deals with 
>interface 
>> > names and then teaching users about aliases which only 
>work in some 
>> > places and are unknown to the kernel.
>> Fair enough - but would you object if we changed the naming scheme 
>> from eth%d to something else?
>I suppose that this would depend on what else. :-) Since you 
>want radical changes I recommend that you design the new 
>persistent naming infrastructure in a way that will allow root 
>to choose to use the classic naming scheme, or many users will 
>scream a lot and at least some distributions will do it anyway.
>I also expect that providing choice at the beginning of 
>development may lead to more acceptance later if and when the 
>new scheme will have proved itself to be superior (at least in 
>some situations).
>You have tought about this for a long time and if so far you 
>have not found a solution which is widely considered superior 
>then I doubt that one will appear soon. Providing your 
>favourite naming scheme as an optional add on will immediately 
>benefit those who like it and greatly reduce opposition from 
>those who do not.

In that way, I suppose char device node solution fits the scheme
perfectly. It doesn't change or interfere with the kernel's default
naming scheme (ethN) in any way. Also, the applications continue to work
the way they did and in addition to supporting traditional names, they
would also support pathnames. Whether all the user space applications
need to be patched can be discussed and debated. But, we can patch
applications like, installers and firewall code, which when don't see
determinism ("eth0 mapping to integrated port 1"), fail and cause very
high impact could be patched. Since users are already familiar with
pathnames like /dev/disk/by-id{label, uuid}, I suppose it might not be
very difficult to get used to pathnames like
/dev/netdev/by-chassis-label/Embedded_NIC_1. Would that be acceptable ?


With regards,
Narendra K  

Re: PATCH: Network Device Naming mechanism and policy

[Stephen Hemminger]

On Mon, 9 Nov 2009 20:11:47 +0530
<Narendra_K@Dell.com> wrote:

> 
> >> > As a distribution developer I highly value solutions like 
> >this which 
> >> > do not require patching every application which deals with 
> >interface 
> >> > names and then teaching users about aliases which only 
> >work in some 
> >> > places and are unknown to the kernel.
> >> Fair enough - but would you object if we changed the naming scheme 
> >> from eth%d to something else?
> >I suppose that this would depend on what else. :-) Since you 
> >want radical changes I recommend that you design the new 
> >persistent naming infrastructure in a way that will allow root 
> >to choose to use the classic naming scheme, or many users will 
> >scream a lot and at least some distributions will do it anyway.
> >I also expect that providing choice at the beginning of 
> >development may lead to more acceptance later if and when the 
> >new scheme will have proved itself to be superior (at least in 
> >some situations).
> >You have tought about this for a long time and if so far you 
> >have not found a solution which is widely considered superior 
> >then I doubt that one will appear soon. Providing your 
> >favourite naming scheme as an optional add on will immediately 
> >benefit those who like it and greatly reduce opposition from 
> >those who do not.
> 
> In that way, I suppose char device node solution fits the scheme
> perfectly. It doesn't change or interfere with the kernel's default
> naming scheme (ethN) in any way. Also, the applications continue to work
> the way they did and in addition to supporting traditional names, they
> would also support pathnames. Whether all the user space applications
> need to be patched can be discussed and debated. But, we can patch
> applications like, installers and firewall code, which when don't see
> determinism ("eth0 mapping to integrated port 1"), fail and cause very
> high impact could be patched. Since users are already familiar with
> pathnames like /dev/disk/by-id{label, uuid}, I suppose it might not be
> very difficult to get used to pathnames like
> /dev/netdev/by-chassis-label/Embedded_NIC_1. Would that be acceptable ?
>

IFNAMSIZ = 16 is hardwired as part of the kernel binary user space API.

Have you observed that the only developers arguing for this come from
outside the normal circle of networking? It seems to be favored only
by those who come to networking from a system or disk point of view.

-- 

Re: PATCH: Network Device Naming mechanism and policy

[Stephen Hemminger]

On Mon, 9 Nov 2009 20:11:47 +0530
<Narendra_K@Dell.com> wrote:

> 
> >> > As a distribution developer I highly value solutions like 
> >this which 
> >> > do not require patching every application which deals with 
> >interface 
> >> > names and then teaching users about aliases which only 
> >work in some 
> >> > places and are unknown to the kernel.
> >> Fair enough - but would you object if we changed the naming scheme 
> >> from eth%d to something else?
> >I suppose that this would depend on what else. :-) Since you 
> >want radical changes I recommend that you design the new 
> >persistent naming infrastructure in a way that will allow root 
> >to choose to use the classic naming scheme, or many users will 
> >scream a lot and at least some distributions will do it anyway.
> >I also expect that providing choice at the beginning of 
> >development may lead to more acceptance later if and when the 
> >new scheme will have proved itself to be superior (at least in 
> >some situations).
> >You have tought about this for a long time and if so far you 
> >have not found a solution which is widely considered superior 
> >then I doubt that one will appear soon. Providing your 
> >favourite naming scheme as an optional add on will immediately 
> >benefit those who like it and greatly reduce opposition from 
> >those who do not.
> 
> In that way, I suppose char device node solution fits the scheme
> perfectly. It doesn't change or interfere with the kernel's default
> naming scheme (ethN) in any way. Also, the applications continue to work
> the way they did and in addition to supporting traditional names, they
> would also support pathnames. Whether all the user space applications
> need to be patched can be discussed and debated. But, we can patch
> applications like, installers and firewall code, which when don't see
> determinism ("eth0 mapping to integrated port 1"), fail and cause very
> high impact could be patched. Since users are already familiar with
> pathnames like /dev/disk/by-id{label, uuid}, I suppose it might not be
> very difficult to get used to pathnames like
> /dev/netdev/by-chassis-label/Embedded_NIC_1. Would that be acceptable ?
>

IFNAMSIZ = 16 is hardwired as part of the kernel binary user space API.

Have you observed that the only developers arguing for this come from
outside the normal circle of networking? It seems to be favored only
by those who come to networking from a system or disk point of view.

-- 

RE: PATCH: Network Device Naming mechanism and policy

[Narendra_K]

>> >> Fair enough - but would you object if we changed the 
>naming scheme 
>> >> from eth%d to something else?
>> >I suppose that this would depend on what else. :-) Since you want 
>> >radical changes I recommend that you design the new 
>persistent naming 
>> >infrastructure in a way that will allow root to choose to use the 
>> >classic naming scheme, or many users will scream a lot and at least 
>> >some distributions will do it anyway.
>> >I also expect that providing choice at the beginning of development 
>> >may lead to more acceptance later if and when the new scheme will 
>> >have proved itself to be superior (at least in some situations).
>> >You have tought about this for a long time and if so far 
>you have not 
>> >found a solution which is widely considered superior then I doubt 
>> >that one will appear soon. Providing your favourite naming 
>scheme as 
>> >an optional add on will immediately benefit those who like it and 
>> >greatly reduce opposition from those who do not.
>> 
>> In that way, I suppose char device node solution fits the scheme 
>> perfectly. It doesn't change or interfere with the kernel's default 
>> naming scheme (ethN) in any way. Also, the applications continue to 
>> work the way they did and in addition to supporting 
>traditional names, 
>> they would also support pathnames. Whether all the user space 
>> applications need to be patched can be discussed and 
>debated. But, we 
>> can patch applications like, installers and firewall code, 
>which when 
>> don't see determinism ("eth0 mapping to integrated port 1"), 
>fail and 
>> cause very high impact could be patched. Since users are already 
>> familiar with pathnames like /dev/disk/by-id{label, uuid}, I suppose 
>> it might not be very difficult to get used to pathnames like 
>> /dev/netdev/by-chassis-label/Embedded_NIC_1. Would that be 
>acceptable ?
>>
>
>IFNAMSIZ = 16 is hardwired as part of the kernel binary user space API.

This factor is taken into consideration. The user space applications
take this pathname, map it to the kernel name and use the kernel name to
issue ioctls (http://linux.dell.com/wiki/index.php/Oss/libnetdevname).
The pathname was suggested because it provides a way to get to the right
interface when "integrated port 1" doesn't get the expected name "eth0".

With regards,
Narendra K  

RE: PATCH: Network Device Naming mechanism and policy

[Narendra_K]

>> >> Fair enough - but would you object if we changed the 
>naming scheme 
>> >> from eth%d to something else?
>> >I suppose that this would depend on what else. :-) Since you want 
>> >radical changes I recommend that you design the new 
>persistent naming 
>> >infrastructure in a way that will allow root to choose to use the 
>> >classic naming scheme, or many users will scream a lot and at least 
>> >some distributions will do it anyway.
>> >I also expect that providing choice at the beginning of development 
>> >may lead to more acceptance later if and when the new scheme will 
>> >have proved itself to be superior (at least in some situations).
>> >You have tought about this for a long time and if so far 
>you have not 
>> >found a solution which is widely considered superior then I doubt 
>> >that one will appear soon. Providing your favourite naming 
>scheme as 
>> >an optional add on will immediately benefit those who like it and 
>> >greatly reduce opposition from those who do not.
>> 
>> In that way, I suppose char device node solution fits the scheme 
>> perfectly. It doesn't change or interfere with the kernel's default 
>> naming scheme (ethN) in any way. Also, the applications continue to 
>> work the way they did and in addition to supporting 
>traditional names, 
>> they would also support pathnames. Whether all the user space 
>> applications need to be patched can be discussed and 
>debated. But, we 
>> can patch applications like, installers and firewall code, 
>which when 
>> don't see determinism ("eth0 mapping to integrated port 1"), 
>fail and 
>> cause very high impact could be patched. Since users are already 
>> familiar with pathnames like /dev/disk/by-id{label, uuid}, I suppose 
>> it might not be very difficult to get used to pathnames like 
>> /dev/netdev/by-chassis-label/Embedded_NIC_1. Would that be 
>acceptable ?
>>
>
>IFNAMSIZ = 16 is hardwired as part of the kernel binary user space API.

This factor is taken into consideration. The user space applications
take this pathname, map it to the kernel name and use the kernel name to
issue ioctls (http://linux.dell.com/wiki/index.php/Oss/libnetdevname).
The pathname was suggested because it provides a way to get to the right
interface when "integrated port 1" doesn't get the expected name "eth0".

With regards,
Narendra K  

Re: PATCH: Network Device Naming mechanism and policy

[Narendra K]

On Wed, Oct 28, 2009 at 06:21:49PM +0530, K, Narendra wrote:
> > At the moment, we do not appear to get the proper change uevents from 
> > things like 'ip link set dev <foo> address <bar>', so we can't 
> > currently maintain these symlinks.
> > 
> 
> I have observed that the kernel does generate a "move" event when
> interfaces are renamed. Looks like udev at present doesn't handle this
> event, but i suppose it could be extended to hanlde this event.
> 

With the patch "[PATCH]udev:Extend udev to support move events"
(http://marc.info/?l=linux-hotplug&m=125673399217656&w=2) udev would be
able to handle "move" events that are generated when interfaces are
renamed by commands like nameif. And we can maintain the symlinks by
having rules to handle this move event.

With regards,
Narendra K

Re: PATCH: Network Device Naming mechanism and policy

[Narendra K]

On Wed, Oct 28, 2009 at 06:21:49PM +0530, K, Narendra wrote:
> > At the moment, we do not appear to get the proper change uevents from 
> > things like 'ip link set dev <foo> address <bar>', so we can't 
> > currently maintain these symlinks.
> > 
> 
> I have observed that the kernel does generate a "move" event when
> interfaces are renamed. Looks like udev at present doesn't handle this
> event, but i suppose it could be extended to hanlde this event.
> 

With the patch "[PATCH]udev:Extend udev to support move events"
(http://marc.info/?l=linux-hotplug&m\x125673399217656&w=2) udev would be
able to handle "move" events that are generated when interfaces are
renamed by commands like nameif. And we can maintain the symlinks by
having rules to handle this move event.

With regards,
Narendra K

Re: PATCH: Network Device Naming mechanism and policy

[Ben Hutchings]

On Tue, 2009-10-13 at 11:17 -0700, Dan Williams wrote:
> On Mon, 2009-10-12 at 14:41 -0500, Karl O. Pinc wrote:
> > On 10/12/2009 02:09:00 PM, Greg KH wrote:
> > 
> > > "LOM"?
> > 
> > "LAN On Motherboard" of all things.  
> > 
> > (I had to look this
> > one up.  The expansion better suited
> > to today's economy is "Low On Manna".)
> 
> Or the previous usage from Sun, Apple, and others: "Lights Out
> Management".  Not sure why they needed to clash with a name already used
> in server-space, but perhaps I'm just out-of-date and there's a fancier
> name for LOM these days, and LOM got repurposed.

It's widely used with both meanings - what's more, LOM is an expected
feature of LOMs. :-)

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: PATCH: Network Device Naming mechanism and policy

[Ben Hutchings]

On Tue, 2009-10-13 at 11:17 -0700, Dan Williams wrote:
> On Mon, 2009-10-12 at 14:41 -0500, Karl O. Pinc wrote:
> > On 10/12/2009 02:09:00 PM, Greg KH wrote:
> > 
> > > "LOM"?
> > 
> > "LAN On Motherboard" of all things.  
> > 
> > (I had to look this
> > one up.  The expansion better suited
> > to today's economy is "Low On Manna".)
> 
> Or the previous usage from Sun, Apple, and others: "Lights Out
> Management".  Not sure why they needed to clash with a name already used
> in server-space, but perhaps I'm just out-of-date and there's a fancier
> name for LOM these days, and LOM got repurposed.

It's widely used with both meanings - what's more, LOM is an expected
feature of LOMs. :-)

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: PATCH: Network Device Naming mechanism and policy

[Dan Williams]

On Mon, 2009-10-12 at 14:41 -0500, Karl O. Pinc wrote:
> On 10/12/2009 02:09:00 PM, Greg KH wrote:
> 
> > "LOM"?
> 
> "LAN On Motherboard" of all things.  
> 
> (I had to look this
> one up.  The expansion better suited
> to today's economy is "Low On Manna".)

Or the previous usage from Sun, Apple, and others: "Lights Out
Management".  Not sure why they needed to clash with a name already used
in server-space, but perhaps I'm just out-of-date and there's a fancier
name for LOM these days, and LOM got repurposed.

Dan

Re: PATCH: Network Device Naming mechanism and policy

[Dan Williams]

On Mon, 2009-10-12 at 14:41 -0500, Karl O. Pinc wrote:
> On 10/12/2009 02:09:00 PM, Greg KH wrote:
> 
> > "LOM"?
> 
> "LAN On Motherboard" of all things.  
> 
> (I had to look this
> one up.  The expansion better suited
> to today's economy is "Low On Manna".)

Or the previous usage from Sun, Apple, and others: "Lights Out
Management".  Not sure why they needed to clash with a name already used
in server-space, but perhaps I'm just out-of-date and there's a fancier
name for LOM these days, and LOM got repurposed.

Dan

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Mon, Oct 12, 2009 at 12:09:00PM -0700, Greg KH wrote:
> "LOM"?

LAN on Motherboard (e.g. an embedded NIC, as opposed to being in some
slot).

> Isn't what you want is a PCI slot detection, combined with the order on
> board in which the port is enumerated?

Most folks do, yes.


> I still fail to see how this dummy char device would solve this problem,
> as everything you can do today in userspace would be the same with this
> device node as you can't do anything with the symlink name on its own,
> right?

You are correct, the char device by itself doesn't help with this.
You noted earlier, the char device is really only needed if we want to
be able have multiple names for the same device, only exposed in
userspace.

If all we want to do is change the namespace for devices the kernel
uses, from "ethN" to something else, we can do that with a single
simple rename.  And biosdevname has several --policy=[] options to
provide that.

--policy=smbios_names => "Embedded NIC 1", "PCI2"
--policy=kernelnames  => "eth0"  (kind of pointless, but included for completeness)
--policy=all_ethN     => "eth0..ethN" in ascending slot order, embedded
                         before slots, within a single slot in PCI
                         breadth-first order, and thereafter in MAC
                         address order if really needed.
--policy=all_names    => "eth_s0_0" for the first embedded NIC in PCI
                         breadth-first order, "eth_s1_1" for the
                         second NIC port in PCI slot 1, again in
                         breadth-first order.
--policy=embedded_ethN_slots_names   a combo of the above, but making
                        the embeddeds still retain the "eth0" format
                        and the slots get "eth_s1_1" format.

We could add a dozen more.  all_ethN, and to a lesser extent,
embedded_ethN, are bad choices if biosdevname is invoked by udev on
every run (e.g. not using persistent rules), because when it's run,
userspace doesn't know if there are more drivers to be loaded yet, and
so biosdevname can't know if there are more NICs to
include in the enumeration, to get the naming right.  (yet another
example of enumeration != naming).

Now, for --policy=smbios_names, we get lucky in that the string length
returned from SMBIOS is 14 characters, it fits in IFNAMSZ.  We may not
always get so lucky, SMBIOS strings are arbitrary lengths.  This works
somewhat better as a symlink source, as that can be longer than
IFNAMSZ long.

--policy=all_names is pretty good.  It fits, it lines up to a fairly
obvious hardware mapping.  It breaks any code that assumes a regular
expression eth[[:digit:]]+ for the name.

By having a single name in the kernel for a particular device, it
forces a sysadmin to choose one naming policy.  We can't have multiple
names for the same device (like we do for disks).  And conceptually,
I'd like to be able to have a physical-based naming scheme (all_names)
for use at installtime and mechanical configuration, and a
logical-based naming scheme for firewall rules and other policy-based
configuration.  I can't do that with a single name.

I can't please everyone.  I can't keep the kernel's eth* namespace
intact, as it is meaningless and non-deterministic.  I can switch
names to another namespace, at the risk of breaking all the
applications that have bad assumptions.  And I can't have multiple
names for the same device.  But if I have multiple names for the same
device, then I can keep the eth* namespace intact (meaningless as it
is), and provide more meaningful names that work too.

I'm not hung up on the char device.  If I could have multiple names
for the same device, done entirely inside the kernel, I'd go for that
too.  That suggestion has met similar resistance.  Or any other
mechanism, I'm open to also.  But _not_ solving it is no longer an
option for me and my customers.


-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Mon, Oct 12, 2009 at 12:09:00PM -0700, Greg KH wrote:
> "LOM"?

LAN on Motherboard (e.g. an embedded NIC, as opposed to being in some
slot).

> Isn't what you want is a PCI slot detection, combined with the order on
> board in which the port is enumerated?

Most folks do, yes.


> I still fail to see how this dummy char device would solve this problem,
> as everything you can do today in userspace would be the same with this
> device node as you can't do anything with the symlink name on its own,
> right?

You are correct, the char device by itself doesn't help with this.
You noted earlier, the char device is really only needed if we want to
be able have multiple names for the same device, only exposed in
userspace.

If all we want to do is change the namespace for devices the kernel
uses, from "ethN" to something else, we can do that with a single
simple rename.  And biosdevname has several --policy=[] options to
provide that.

--policy=smbios_names => "Embedded NIC 1", "PCI2"
--policy=kernelnames  => "eth0"  (kind of pointless, but included for completeness)
--policy=all_ethN     => "eth0..ethN" in ascending slot order, embedded
                         before slots, within a single slot in PCI
                         breadth-first order, and thereafter in MAC
                         address order if really needed.
--policy=all_names    => "eth_s0_0" for the first embedded NIC in PCI
                         breadth-first order, "eth_s1_1" for the
                         second NIC port in PCI slot 1, again in
                         breadth-first order.
--policy=embedded_ethN_slots_names   a combo of the above, but making
                        the embeddeds still retain the "eth0" format
                        and the slots get "eth_s1_1" format.

We could add a dozen more.  all_ethN, and to a lesser extent,
embedded_ethN, are bad choices if biosdevname is invoked by udev on
every run (e.g. not using persistent rules), because when it's run,
userspace doesn't know if there are more drivers to be loaded yet, and
so biosdevname can't know if there are more NICs to
include in the enumeration, to get the naming right.  (yet another
example of enumeration != naming).

Now, for --policy=smbios_names, we get lucky in that the string length
returned from SMBIOS is 14 characters, it fits in IFNAMSZ.  We may not
always get so lucky, SMBIOS strings are arbitrary lengths.  This works
somewhat better as a symlink source, as that can be longer than
IFNAMSZ long.

--policy=all_names is pretty good.  It fits, it lines up to a fairly
obvious hardware mapping.  It breaks any code that assumes a regular
expression eth[[:digit:]]+ for the name.

By having a single name in the kernel for a particular device, it
forces a sysadmin to choose one naming policy.  We can't have multiple
names for the same device (like we do for disks).  And conceptually,
I'd like to be able to have a physical-based naming scheme (all_names)
for use at installtime and mechanical configuration, and a
logical-based naming scheme for firewall rules and other policy-based
configuration.  I can't do that with a single name.

I can't please everyone.  I can't keep the kernel's eth* namespace
intact, as it is meaningless and non-deterministic.  I can switch
names to another namespace, at the risk of breaking all the
applications that have bad assumptions.  And I can't have multiple
names for the same device.  But if I have multiple names for the same
device, then I can keep the eth* namespace intact (meaningless as it
is), and provide more meaningful names that work too.

I'm not hung up on the char device.  If I could have multiple names
for the same device, done entirely inside the kernel, I'd go for that
too.  That suggestion has met similar resistance.  Or any other
mechanism, I'm open to also.  But _not_ solving it is no longer an
option for me and my customers.


-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Karl O. Pinc]

On 10/12/2009 02:09:00 PM, Greg KH wrote:

> "LOM"?

"LAN On Motherboard" of all things.  

(I had to look this
one up.  The expansion better suited
to today's economy is "Low On Manna".)


Karl <kop@meme.com>
Free Software:  "You don't pay back, you pay forward."
                 -- Robert A. Heinlein

Re: PATCH: Network Device Naming mechanism and policy

[Karl O. Pinc]

On 10/12/2009 02:09:00 PM, Greg KH wrote:

> "LOM"?

"LAN On Motherboard" of all things.  

(I had to look this
one up.  The expansion better suited
to today's economy is "Low On Manna".)


Karl <kop@meme.com>
Free Software:  "You don't pay back, you pay forward."
                 -- Robert A. Heinlein

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Mon, Oct 12, 2009 at 01:47:12PM -0500, Narendra K wrote:
> > On Mon, Oct 12, 2009 at 01:45:28PM -0400, Bill Nottingham wrote:
> > > Greg KH (greg@kroah.com) said: 
> > > > > Today, port naming is completely nondeterministic.  If you have 
> > > > > but one NIC, there are few chances to get the name wrong (it'll be
> > eth0).
> > > > > If you have >1 NIC, chances increase to get it wrong.
> > > > 
> > > > That is why all distros name network devices based on the only 
> > > > deterministic thing they have today, the MAC address.  I still fail 
> > > > to see why you do not like this solution, it is honestly the only 
> > > > way to properly name network devices in a sane manner.
> > > > 
> > > > All distros also provide a way to easily rename the network devices,
> > 
> > > > to place a specific name on a specific MAC address, so again, this 
> > > > should all be solved already.
> > > 
> > > No, it's not solved. Even if you have persistent names once you 
> > > install, if you ever re-image, you're likely to get *different* 
> > > persistent names; the first load will always be non-detmerministic.
> > > 
> > > The only way around this would be to have some sort of screen like:
> > > 
> > >   Would you like your network devices to be enumerated by
> > > 
> > >   [ ] MAC address
> > >   [ ] PCI device order
> > >   [ ] Driver name
> > >   [ ] Other
> > 
> > [ ] PCI slot name
> > 
> > That's one that modern systems are now reporting, and should solve
> > Matt's problem as well, right?
> 
> MAC address and pci slots might ensure that device names are persistant
> across system reboots. They do not assure that the LOM 1 is named as
> "eth0" which is the expectation.

"LOM"?

Isn't what you want is a PCI slot detection, combined with the order on
board in which the port is enumerated?

> In case of unattended installs, installers abort installation if the
> port which gets the name "eth0" does not have the link up and doesn't
> have the IP.

Sounds like a broken installer :)

> This is often the case becaused the LOMS have the boot capability. We
> can acheive persistent naming using MAC adresses. But it doesn't
> address the expectation that LOM-1 becomes "eth0" on every reboot
> which is mostly used for unattended installs.(Installers can be told
> to use options like IPAPPEND 2, but the this solution would make it of
> no use).

I still fail to see how this dummy char device would solve this problem,
as everything you can do today in userspace would be the same with this
device node as you can't do anything with the symlink name on its own,
right?

> > > which is just all sorts of fail in and of itself. Especially since 
> > > once you get to the point where you can coherently ask this in a 
> > > native installer, the drivers have already loaded.
> > 
> > No, the driver load order doesn't determine this, you need the drivers
> > loaded first before you can rename anything :)
> > 
> 
> Renaming an interface in the kernel namespace itself, might need to
> problems like duplicate names. But having names in alternate namespace
> not in kernel namespace might be more useful.

Not if you can't do anything useful with those names :)

> > And I don't see how Matt's proposed patch helps resolve this type of
> > issue any better than what we currently have today, do you?
> > 
> 
> I have a system which has 4 LOMS and 1 add-in NIC and the add-in NIC
> always gets the name "eth0" eventhough i PXE booted from LOM-1. Since
> "eth0" doesn't have link up, the installer stops and asks which
> interface should get IP. This would not suit an unattended install
> scenario. If the installer can use a pathname like
> /dev/net/by-chassis-label/Embedded_NIC_1 (->eth1 which is my LOM-1), it
> would always point to the correct interface irrespective of whether it
> is "eth0" or not.

Um, again, you can name your network devices like this today, without
these symlinks...

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Greg KH]

On Mon, Oct 12, 2009 at 01:47:12PM -0500, Narendra K wrote:
> > On Mon, Oct 12, 2009 at 01:45:28PM -0400, Bill Nottingham wrote:
> > > Greg KH (greg@kroah.com) said: 
> > > > > Today, port naming is completely nondeterministic.  If you have 
> > > > > but one NIC, there are few chances to get the name wrong (it'll be
> > eth0).
> > > > > If you have >1 NIC, chances increase to get it wrong.
> > > > 
> > > > That is why all distros name network devices based on the only 
> > > > deterministic thing they have today, the MAC address.  I still fail 
> > > > to see why you do not like this solution, it is honestly the only 
> > > > way to properly name network devices in a sane manner.
> > > > 
> > > > All distros also provide a way to easily rename the network devices,
> > 
> > > > to place a specific name on a specific MAC address, so again, this 
> > > > should all be solved already.
> > > 
> > > No, it's not solved. Even if you have persistent names once you 
> > > install, if you ever re-image, you're likely to get *different* 
> > > persistent names; the first load will always be non-detmerministic.
> > > 
> > > The only way around this would be to have some sort of screen like:
> > > 
> > >   Would you like your network devices to be enumerated by
> > > 
> > >   [ ] MAC address
> > >   [ ] PCI device order
> > >   [ ] Driver name
> > >   [ ] Other
> > 
> > [ ] PCI slot name
> > 
> > That's one that modern systems are now reporting, and should solve
> > Matt's problem as well, right?
> 
> MAC address and pci slots might ensure that device names are persistant
> across system reboots. They do not assure that the LOM 1 is named as
> "eth0" which is the expectation.

"LOM"?

Isn't what you want is a PCI slot detection, combined with the order on
board in which the port is enumerated?

> In case of unattended installs, installers abort installation if the
> port which gets the name "eth0" does not have the link up and doesn't
> have the IP.

Sounds like a broken installer :)

> This is often the case becaused the LOMS have the boot capability. We
> can acheive persistent naming using MAC adresses. But it doesn't
> address the expectation that LOM-1 becomes "eth0" on every reboot
> which is mostly used for unattended installs.(Installers can be told
> to use options like IPAPPEND 2, but the this solution would make it of
> no use).

I still fail to see how this dummy char device would solve this problem,
as everything you can do today in userspace would be the same with this
device node as you can't do anything with the symlink name on its own,
right?

> > > which is just all sorts of fail in and of itself. Especially since 
> > > once you get to the point where you can coherently ask this in a 
> > > native installer, the drivers have already loaded.
> > 
> > No, the driver load order doesn't determine this, you need the drivers
> > loaded first before you can rename anything :)
> > 
> 
> Renaming an interface in the kernel namespace itself, might need to
> problems like duplicate names. But having names in alternate namespace
> not in kernel namespace might be more useful.

Not if you can't do anything useful with those names :)

> > And I don't see how Matt's proposed patch helps resolve this type of
> > issue any better than what we currently have today, do you?
> > 
> 
> I have a system which has 4 LOMS and 1 add-in NIC and the add-in NIC
> always gets the name "eth0" eventhough i PXE booted from LOM-1. Since
> "eth0" doesn't have link up, the installer stops and asks which
> interface should get IP. This would not suit an unattended install
> scenario. If the installer can use a pathname like
> /dev/net/by-chassis-label/Embedded_NIC_1 (->eth1 which is my LOM-1), it
> would always point to the correct interface irrespective of whether it
> is "eth0" or not.

Um, again, you can name your network devices like this today, without
these symlinks...

thanks,

greg k-h

Re: PATCH: Network Device Naming mechanism and policy

[Narendra K]

> On Mon, Oct 12, 2009 at 01:45:28PM -0400, Bill Nottingham wrote:
> > Greg KH (greg@kroah.com) said: 
> > > > Today, port naming is completely nondeterministic.  If you have 
> > > > but one NIC, there are few chances to get the name wrong (it'll be
> eth0).
> > > > If you have >1 NIC, chances increase to get it wrong.
> > > 
> > > That is why all distros name network devices based on the only 
> > > deterministic thing they have today, the MAC address.  I still fail 
> > > to see why you do not like this solution, it is honestly the only 
> > > way to properly name network devices in a sane manner.
> > > 
> > > All distros also provide a way to easily rename the network devices,
> 
> > > to place a specific name on a specific MAC address, so again, this 
> > > should all be solved already.
> > 
> > No, it's not solved. Even if you have persistent names once you 
> > install, if you ever re-image, you're likely to get *different* 
> > persistent names; the first load will always be non-detmerministic.
> > 
> > The only way around this would be to have some sort of screen like:
> > 
> >   Would you like your network devices to be enumerated by
> > 
> >   [ ] MAC address
> >   [ ] PCI device order
> >   [ ] Driver name
> >   [ ] Other
> 
> [ ] PCI slot name
> 
> That's one that modern systems are now reporting, and should solve
> Matt's problem as well, right?

MAC address and pci slots might ensure that device names are persistant
across system reboots. They do not assure that the LOM 1 is named as
"eth0" which is the expectation. In case of unattended installs,
installers abort installation if the port which gets the name "eth0"
does not have the link up and doesn't have the IP.This is often the case
becaused the LOMS have the boot capability. We can acheive
persistent naming using MAC adresses. But it doesn't address the
expectation that LOM-1 becomes "eth0" on every reboot which is mostly
used for unattended installs.(Installers can be told to use options like
IPAPPEND 2, but the this solution would make it of no use).

> > which is just all sorts of fail in and of itself. Especially since 
> > once you get to the point where you can coherently ask this in a 
> > native installer, the drivers have already loaded.
> 
> No, the driver load order doesn't determine this, you need the drivers
> loaded first before you can rename anything :)
> 

Renaming an interface in the kernel namespace itself, might need to
problems like duplicate names. But having names in alternate namespace not in kernel
namespace might be more useful.


> And I don't see how Matt's proposed patch helps resolve this type of
> issue any better than what we currently have today, do you?
> 

I have a system which has 4 LOMS and 1 add-in NIC and the add-in NIC
always gets the name "eth0" eventhough i PXE booted from LOM-1. Since
"eth0" doesn't have link up, the installer stops and asks which
interface should get IP. This would not suit an unattended install
scenario. If the installer can use a pathname like
/dev/net/by-chassis-label/Embedded_NIC_1 (->eth1 which is my LOM-1), it
would always point to the correct interface irrespective of whether it
is "eth0" or not.

With regards,
Narendra K

Re: PATCH: Network Device Naming mechanism and policy

[Narendra K]

> On Mon, Oct 12, 2009 at 01:45:28PM -0400, Bill Nottingham wrote:
> > Greg KH (greg@kroah.com) said: 
> > > > Today, port naming is completely nondeterministic.  If you have 
> > > > but one NIC, there are few chances to get the name wrong (it'll be
> eth0).
> > > > If you have >1 NIC, chances increase to get it wrong.
> > > 
> > > That is why all distros name network devices based on the only 
> > > deterministic thing they have today, the MAC address.  I still fail 
> > > to see why you do not like this solution, it is honestly the only 
> > > way to properly name network devices in a sane manner.
> > > 
> > > All distros also provide a way to easily rename the network devices,
> 
> > > to place a specific name on a specific MAC address, so again, this 
> > > should all be solved already.
> > 
> > No, it's not solved. Even if you have persistent names once you 
> > install, if you ever re-image, you're likely to get *different* 
> > persistent names; the first load will always be non-detmerministic.
> > 
> > The only way around this would be to have some sort of screen like:
> > 
> >   Would you like your network devices to be enumerated by
> > 
> >   [ ] MAC address
> >   [ ] PCI device order
> >   [ ] Driver name
> >   [ ] Other
> 
> [ ] PCI slot name
> 
> That's one that modern systems are now reporting, and should solve
> Matt's problem as well, right?

MAC address and pci slots might ensure that device names are persistant
across system reboots. They do not assure that the LOM 1 is named as
"eth0" which is the expectation. In case of unattended installs,
installers abort installation if the port which gets the name "eth0"
does not have the link up and doesn't have the IP.This is often the case
becaused the LOMS have the boot capability. We can acheive
persistent naming using MAC adresses. But it doesn't address the
expectation that LOM-1 becomes "eth0" on every reboot which is mostly
used for unattended installs.(Installers can be told to use options like
IPAPPEND 2, but the this solution would make it of no use).

> > which is just all sorts of fail in and of itself. Especially since 
> > once you get to the point where you can coherently ask this in a 
> > native installer, the drivers have already loaded.
> 
> No, the driver load order doesn't determine this, you need the drivers
> loaded first before you can rename anything :)
> 

Renaming an interface in the kernel namespace itself, might need to
problems like duplicate names. But having names in alternate namespace not in kernel
namespace might be more useful.


> And I don't see how Matt's proposed patch helps resolve this type of
> issue any better than what we currently have today, do you?
> 

I have a system which has 4 LOMS and 1 add-in NIC and the add-in NIC
always gets the name "eth0" eventhough i PXE booted from LOM-1. Since
"eth0" doesn't have link up, the installer stops and asks which
interface should get IP. This would not suit an unattended install
scenario. If the installer can use a pathname like
/dev/net/by-chassis-label/Embedded_NIC_1 (->eth1 which is my LOM-1), it
would always point to the correct interface irrespective of whether it
is "eth0" or not.

With regards,
Narendra K

Re: PATCH: Network Device Naming mechanism and policy

[Narendra K]

> > This makes them pretty comparable to LABELs on disks, and we have a 
> > /dev/disk/by-label
> > 
> > Remember that udev already supports symlink stacking, and priorities 
> > and such.
> > 
> > I don't think there's any danger of supporting a /dev/netdev/by-mac by
> 
> > default, it'll be a benefit to most and those who don't have unique 
> > MACs will just ignore it.
> 
> At the moment, we do not appear to get the proper change uevents from
> things like 'ip link set dev <foo> address <bar>', so we can't currently
> maintain these symlinks.
> 

I have observed that the kernel does generate a "move" event when
interfaces are renamed. Looks like udev at present doesn't handle this event, but i
suppose it could be extended to hanlde this event.

With regards,
Narendra K

Re: PATCH: Network Device Naming mechanism and policy

[Narendra K]

> > This makes them pretty comparable to LABELs on disks, and we have a 
> > /dev/disk/by-label
> > 
> > Remember that udev already supports symlink stacking, and priorities 
> > and such.
> > 
> > I don't think there's any danger of supporting a /dev/netdev/by-mac by
> 
> > default, it'll be a benefit to most and those who don't have unique 
> > MACs will just ignore it.
> 
> At the moment, we do not appear to get the proper change uevents from
> things like 'ip link set dev <foo> address <bar>', so we can't currently
> maintain these symlinks.
> 

I have observed that the kernel does generate a "move" event when
interfaces are renamed. Looks like udev at present doesn't handle this event, but i
suppose it could be extended to hanlde this event.

With regards,
Narendra K

Re: PATCH: Network Device Naming mechanism and policy

[Marco d'Itri]

[-- Attachment #1: Type: text/plain, Size: 627 bytes --]

On Oct 12, Bill Nottingham <notting@redhat.com> wrote:

> No, it's not solved. Even if you have persistent names once you install,
> if you ever re-image, you're likely to get *different* persistent names;
> the first load will always be non-detmerministic.
Can somebody remind me what's wrong with establishing a syncronization
point in the boot (or installation) process at which time all network
devices are enumerated by PCI device order and renamed?
I know that this does not solve every problem, but nor do the other
methods and this one is more similar to what other operating systems do.

-- 
ciao,
Marco

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Fri, Oct 09, 2009 at 09:12:47AM -0700, Stephen Hemminger wrote:
> On Fri, 9 Oct 2009 11:04:43 -0500
> Narendra K <Narendra_K@dell.com> wrote:
> 
> > By creating character devices for every network device, we can use
> > udev to maintain alternate naming policies for devices, including
> > additional names for the same device, without interfering with the
> > name that the kernel assigns a device.
> > 
> What happens if interface is renamed by either networking API:
>   ip li set dev eth0 name eth-renamed-by-me

udev sees a KOBJ_MOVE uevent.  Today it does not handle these events
at all, but talking with Kay, he believes udev can be extended to
handle that pretty easily.


> or via
>    mv /dev/net/eth0 /dev/net/eth-renamed-by-user

There is no VFS magic today such that this 'mv' will translate into a
device_rename() function inside the kernel.

udev "owns" the /dev/netdev/eth0 device node name.  If a user (root)
does a 'mv', the symlink referants will be broken.  This is no
different than doing so for a disk device or any other udev-managed
device node.  If someone does a
  mv /dev/sda /dev/sda-mybootdisk
and is relying on the /dev/disk/by-label/mybootdisk -> /dev/sda
symlink in some way, the application will fail.

> or if both are done at same time (what is locking model?)

There is no locking model.  udev will serialize the rename events
though, as seen in userspace.

Thanks,
Matt

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Matt Domsch]

On Fri, Oct 09, 2009 at 09:12:47AM -0700, Stephen Hemminger wrote:
> On Fri, 9 Oct 2009 11:04:43 -0500
> Narendra K <Narendra_K@dell.com> wrote:
> 
> > By creating character devices for every network device, we can use
> > udev to maintain alternate naming policies for devices, including
> > additional names for the same device, without interfering with the
> > name that the kernel assigns a device.
> > 
> What happens if interface is renamed by either networking API:
>   ip li set dev eth0 name eth-renamed-by-me

udev sees a KOBJ_MOVE uevent.  Today it does not handle these events
at all, but talking with Kay, he believes udev can be extended to
handle that pretty easily.


> or via
>    mv /dev/net/eth0 /dev/net/eth-renamed-by-user

There is no VFS magic today such that this 'mv' will translate into a
device_rename() function inside the kernel.

udev "owns" the /dev/netdev/eth0 device node name.  If a user (root)
does a 'mv', the symlink referants will be broken.  This is no
different than doing so for a disk device or any other udev-managed
device node.  If someone does a
  mv /dev/sda /dev/sda-mybootdisk
and is relying on the /dev/disk/by-label/mybootdisk -> /dev/sda
symlink in some way, the application will fail.

> or if both are done at same time (what is locking model?)

There is no locking model.  udev will serialize the rename events
though, as seen in userspace.

Thanks,
Matt

-- 
Matt Domsch
Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

Re: PATCH: Network Device Naming mechanism and policy

[Stephen Hemminger]

On Fri, 9 Oct 2009 11:04:43 -0500
Narendra K <Narendra_K@dell.com> wrote:

> On Fri, Oct 09, 2009 at 09:22:19PM +0530, K, Narendra wrote:
> > Jordan_Hargrave@Dell.com wrote:
> > > example udev config:
> > > SUBSYSTEM=="net",
> > SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> > work as well.  But coupling the ifindex to the MAC address like this
> > doesn't work.  (In general, coupling any two unrelated attributes when
> > trying to do persistent names doesn't work.)
> > 
> Attaching the latest patch incorporating review comments.
> 
> By creating character devices for every network device, we can use
> udev to maintain alternate naming policies for devices, including
> additional names for the same device, without interfering with the
> name that the kernel assigns a device.
> 
> This is conditionalized on CONFIG_NET_CDEV.  If enabled (the default),
> device nodes will automatically be created in /dev/netdev/ for each
> network device.  (/dev/net/ is already populated by the tun device.)
> 
> These device nodes are not functional at the moment - open() returns
> -ENOSYS.  Their only purpose is to provide userspace with a kernel
> name to ifindex mapping, in a form that udev can easily manage.
> 
> Signed-off-by: Jordan Hargrave <Jordan_Hargrave@dell.com>
> Signed-off-by: Narendra K <Narendra_K@dell.com>
> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>

What happens if interface is renamed by either networking API:
  ip li set dev eth0 name eth-renamed-by-me
or via
   mv /dev/net/eth0 /dev/net/eth-renamed-by-user
or if both are done at same time (what is locking model?)

Re: PATCH: Network Device Naming mechanism and policy

[Stephen Hemminger]

On Fri, 9 Oct 2009 11:04:43 -0500
Narendra K <Narendra_K@dell.com> wrote:

> On Fri, Oct 09, 2009 at 09:22:19PM +0530, K, Narendra wrote:
> > Jordan_Hargrave@Dell.com wrote:
> > > example udev config:
> > > SUBSYSTEM="net",
> > SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> > work as well.  But coupling the ifindex to the MAC address like this
> > doesn't work.  (In general, coupling any two unrelated attributes when
> > trying to do persistent names doesn't work.)
> > 
> Attaching the latest patch incorporating review comments.
> 
> By creating character devices for every network device, we can use
> udev to maintain alternate naming policies for devices, including
> additional names for the same device, without interfering with the
> name that the kernel assigns a device.
> 
> This is conditionalized on CONFIG_NET_CDEV.  If enabled (the default),
> device nodes will automatically be created in /dev/netdev/ for each
> network device.  (/dev/net/ is already populated by the tun device.)
> 
> These device nodes are not functional at the moment - open() returns
> -ENOSYS.  Their only purpose is to provide userspace with a kernel
> name to ifindex mapping, in a form that udev can easily manage.
> 
> Signed-off-by: Jordan Hargrave <Jordan_Hargrave@dell.com>
> Signed-off-by: Narendra K <Narendra_K@dell.com>
> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>

What happens if interface is renamed by either networking API:
  ip li set dev eth0 name eth-renamed-by-me
or via
   mv /dev/net/eth0 /dev/net/eth-renamed-by-user
or if both are done at same time (what is locking model?)

Re: PATCH: Network Device Naming mechanism and policy

[Narendra K]

On Fri, Oct 09, 2009 at 09:22:19PM +0530, K, Narendra wrote:
> Jordan_Hargrave@Dell.com wrote:
> > example udev config:
> > SUBSYSTEM=="net",
> SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> work as well.  But coupling the ifindex to the MAC address like this
> doesn't work.  (In general, coupling any two unrelated attributes when
> trying to do persistent names doesn't work.)
> 
Attaching the latest patch incorporating review comments.

By creating character devices for every network device, we can use
udev to maintain alternate naming policies for devices, including
additional names for the same device, without interfering with the
name that the kernel assigns a device.

This is conditionalized on CONFIG_NET_CDEV.  If enabled (the default),
device nodes will automatically be created in /dev/netdev/ for each
network device.  (/dev/net/ is already populated by the tun device.)

These device nodes are not functional at the moment - open() returns
-ENOSYS.  Their only purpose is to provide userspace with a kernel
name to ifindex mapping, in a form that udev can easily manage.

Signed-off-by: Jordan Hargrave <Jordan_Hargrave@dell.com>
Signed-off-by: Narendra K <Narendra_K@dell.com>
Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
---
 include/linux/netdevice.h |    4 ++++
 net/Kconfig               |   10 ++++++++++
 net/core/Makefile         |    1 +
 net/core/cdev.c           |   42 ++++++++++++++++++++++++++++++++++++++++++
 net/core/cdev.h           |   13 +++++++++++++
 net/core/dev.c            |   10 ++++++++++
 net/core/net-sysfs.c      |   13 +++++++++++++
 7 files changed, 93 insertions(+), 0 deletions(-)
 create mode 100644 net/core/cdev.c
 create mode 100644 net/core/cdev.h

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 94958c1..7c0fc81 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -44,6 +44,7 @@
 #include <linux/workqueue.h>
 
 #include <linux/ethtool.h>
+#include <linux/cdev.h>
 #include <net/net_namespace.h>
 #include <net/dsa.h>
 #ifdef CONFIG_DCB
@@ -916,6 +917,9 @@ struct net_device
 	/* max exchange id for FCoE LRO by ddp */
 	unsigned int		fcoe_ddp_xid;
 #endif
+#ifdef CONFIG_NET_CDEV
+	struct cdev cdev;
+#endif
 };
 #define to_net_dev(d) container_of(d, struct net_device, dev)
 
diff --git a/net/Kconfig b/net/Kconfig
index 041c35e..bdc5bd7 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -43,6 +43,16 @@ config COMPAT_NETLINK_MESSAGES
 	  Newly written code should NEVER need this option but do
 	  compat-independent messages instead!
 
+config NET_CDEV
+       bool "/dev files for network devices"
+       default y
+       help
+         This option causes /dev entries to be created for each
+         network device.  This allows the use of udev to create
+         alternate device naming policies.
+
+	 If unsure, say Y.
+
 menu "Networking options"
 
 source "net/packet/Kconfig"
diff --git a/net/core/Makefile b/net/core/Makefile
index 796f46e..0b40d2c 100644
--- a/net/core/Makefile
+++ b/net/core/Makefile
@@ -19,4 +19,5 @@ obj-$(CONFIG_NET_DMA) += user_dma.o
 obj-$(CONFIG_FIB_RULES) += fib_rules.o
 obj-$(CONFIG_TRACEPOINTS) += net-traces.o
 obj-$(CONFIG_NET_DROP_MONITOR) += drop_monitor.o
+obj-$(CONFIG_NET_CDEV) += cdev.o
 
diff --git a/net/core/cdev.c b/net/core/cdev.c
new file mode 100644
index 0000000..1f36076
--- /dev/null
+++ b/net/core/cdev.c
@@ -0,0 +1,42 @@
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/netdevice.h>
+#include <linux/device.h>
+
+/* Used for network dynamic major number */
+static dev_t netdev_devt;
+
+static int netdev_cdev_open(struct inode *inode, struct file *filep)
+{
+	/* no operations on this device are implemented */
+	return -ENOSYS;
+}
+
+static const struct file_operations netdev_cdev_fops = {
+	.owner = THIS_MODULE,
+	.open = netdev_cdev_open,
+};
+
+void netdev_cdev_alloc(void)
+{
+	alloc_chrdev_region(&netdev_devt, 0, 1<<20, "net");
+}
+
+void netdev_cdev_init(struct net_device *dev)
+{
+	cdev_init(&dev->cdev, &netdev_cdev_fops);
+	cdev_add(&dev->cdev, MKDEV(MAJOR(netdev_devt), dev->ifindex), 1);
+
+}
+
+void netdev_cdev_del(struct net_device *dev)
+{
+	if (dev->cdev.dev)
+		cdev_del(&dev->cdev);
+}
+
+void netdev_cdev_kobj_init(struct device *dev, struct net_device *net)
+{
+	if (net->cdev.dev)
+		dev->devt = net->cdev.dev;
+}
diff --git a/net/core/cdev.h b/net/core/cdev.h
new file mode 100644
index 0000000..9cf5a90
--- /dev/null
+++ b/net/core/cdev.h
@@ -0,0 +1,13 @@
+#include <linux/netdevice.h>
+
+#ifdef CONFIG_NET_CDEV
+void netdev_cdev_alloc(void);
+void netdev_cdev_init(struct net_device *dev);
+void netdev_cdev_del(struct net_device *dev);
+void netdev_cdev_kobj_init(struct device *dev, struct net_device *net);
+#else
+static inline void netdev_cdev_alloc(void) {}
+static inline void netdev_cdev_init(struct net_device *dev) {}
+static inline void netdev_cdev_del(struct net_device *dev) {}
+static inline void netdev_cdev_kobj_init(struct device *dev, struct net_device *net) {}
+#endif
diff --git a/net/core/dev.c b/net/core/dev.c
index b8f74cf..c4ebfcd 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -129,6 +129,7 @@
 #include <trace/events/napi.h>
 
 #include "net-sysfs.h"
+#include "cdev.h"
 
 /* Instead of increasing this, you should create a hash table. */
 #define MAX_GRO_SKBS 8
@@ -4684,6 +4685,7 @@ static void rollback_registered(struct net_device *dev)
 
 	/* Remove entries from kobject tree */
 	netdev_unregister_kobject(dev);
+	netdev_cdev_del(dev);
 
 	synchronize_net();
 
@@ -4835,6 +4837,8 @@ int register_netdevice(struct net_device *dev)
 	if (dev->features & NETIF_F_SG)
 		dev->features |= NETIF_F_GSO;
 
+	netdev_cdev_init(dev);
+
 	netdev_initialize_kobject(dev);
 	ret = netdev_register_kobject(dev);
 	if (ret)
@@ -4864,6 +4868,7 @@ out:
 	return ret;
 
 err_uninit:
+	netdev_cdev_del(dev);
 	if (dev->netdev_ops->ndo_uninit)
 		dev->netdev_ops->ndo_uninit(dev);
 	goto out;
@@ -5371,6 +5376,7 @@ int dev_change_net_namespace(struct net_device *dev, struct net *net, const char
 	dev_addr_discard(dev);
 
 	netdev_unregister_kobject(dev);
+	netdev_cdev_del(dev);
 
 	/* Actually switch the network namespace */
 	dev_net_set(dev, net);
@@ -5387,6 +5393,8 @@ int dev_change_net_namespace(struct net_device *dev, struct net *net, const char
 			dev->iflink = dev->ifindex;
 	}
 
+	netdev_cdev_init(dev);
+
 	/* Fixup kobjects */
 	err = netdev_register_kobject(dev);
 	WARN_ON(err);
@@ -5620,6 +5628,8 @@ static int __init net_dev_init(void)
 
 	BUG_ON(!dev_boot_phase);
 
+	netdev_cdev_alloc();
+
 	if (dev_proc_init())
 		goto out;
 
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 821d309..ba0af79 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -19,6 +19,7 @@
 #include <net/wext.h>
 
 #include "net-sysfs.h"
+#include "cdev.h"
 
 #ifdef CONFIG_SYSFS
 static const char fmt_hex[] = "%#x\n";
@@ -461,6 +462,14 @@ static void netdev_release(struct device *d)
 	kfree((char *)dev - dev->padded);
 }
 
+#ifdef CONFIG_NET_CDEV
+static char *netdev_devnode(struct device *d, mode_t *mode)
+{
+	struct net_device *dev = to_net_dev(d);
+	return kasprintf(GFP_KERNEL, "netdev/%s", dev->name);
+}
+#endif
+
 static struct class net_class = {
 	.name = "net",
 	.dev_release = netdev_release,
@@ -470,6 +479,9 @@ static struct class net_class = {
 #ifdef CONFIG_HOTPLUG
 	.dev_uevent = netdev_uevent,
 #endif
+#ifdef CONFIG_NET_CDEV
+	.devnode = netdev_devnode,
+#endif
 };
 
 /* Delete sysfs entries but hold kobject reference until after all
@@ -496,6 +508,7 @@ int netdev_register_kobject(struct net_device *net)
 	dev->class = &net_class;
 	dev->platform_data = net;
 	dev->groups = groups;
+	netdev_cdev_kobj_init(dev, net);
 
 	dev_set_name(dev, "%s", net->name);
 
--

With regards,
Narendra K

Re: PATCH: Network Device Naming mechanism and policy

[Narendra K]

On Fri, Oct 09, 2009 at 09:22:19PM +0530, K, Narendra wrote:
> Jordan_Hargrave@Dell.com wrote:
> > example udev config:
> > SUBSYSTEM="net",
> SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> work as well.  But coupling the ifindex to the MAC address like this
> doesn't work.  (In general, coupling any two unrelated attributes when
> trying to do persistent names doesn't work.)
> 
Attaching the latest patch incorporating review comments.

By creating character devices for every network device, we can use
udev to maintain alternate naming policies for devices, including
additional names for the same device, without interfering with the
name that the kernel assigns a device.

This is conditionalized on CONFIG_NET_CDEV.  If enabled (the default),
device nodes will automatically be created in /dev/netdev/ for each
network device.  (/dev/net/ is already populated by the tun device.)

These device nodes are not functional at the moment - open() returns
-ENOSYS.  Their only purpose is to provide userspace with a kernel
name to ifindex mapping, in a form that udev can easily manage.

Signed-off-by: Jordan Hargrave <Jordan_Hargrave@dell.com>
Signed-off-by: Narendra K <Narendra_K@dell.com>
Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
---
 include/linux/netdevice.h |    4 ++++
 net/Kconfig               |   10 ++++++++++
 net/core/Makefile         |    1 +
 net/core/cdev.c           |   42 ++++++++++++++++++++++++++++++++++++++++++
 net/core/cdev.h           |   13 +++++++++++++
 net/core/dev.c            |   10 ++++++++++
 net/core/net-sysfs.c      |   13 +++++++++++++
 7 files changed, 93 insertions(+), 0 deletions(-)
 create mode 100644 net/core/cdev.c
 create mode 100644 net/core/cdev.h

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 94958c1..7c0fc81 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -44,6 +44,7 @@
 #include <linux/workqueue.h>
 
 #include <linux/ethtool.h>
+#include <linux/cdev.h>
 #include <net/net_namespace.h>
 #include <net/dsa.h>
 #ifdef CONFIG_DCB
@@ -916,6 +917,9 @@ struct net_device
 	/* max exchange id for FCoE LRO by ddp */
 	unsigned int		fcoe_ddp_xid;
 #endif
+#ifdef CONFIG_NET_CDEV
+	struct cdev cdev;
+#endif
 };
 #define to_net_dev(d) container_of(d, struct net_device, dev)
 
diff --git a/net/Kconfig b/net/Kconfig
index 041c35e..bdc5bd7 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -43,6 +43,16 @@ config COMPAT_NETLINK_MESSAGES
 	  Newly written code should NEVER need this option but do
 	  compat-independent messages instead!
 
+config NET_CDEV
+       bool "/dev files for network devices"
+       default y
+       help
+         This option causes /dev entries to be created for each
+         network device.  This allows the use of udev to create
+         alternate device naming policies.
+
+	 If unsure, say Y.
+
 menu "Networking options"
 
 source "net/packet/Kconfig"
diff --git a/net/core/Makefile b/net/core/Makefile
index 796f46e..0b40d2c 100644
--- a/net/core/Makefile
+++ b/net/core/Makefile
@@ -19,4 +19,5 @@ obj-$(CONFIG_NET_DMA) += user_dma.o
 obj-$(CONFIG_FIB_RULES) += fib_rules.o
 obj-$(CONFIG_TRACEPOINTS) += net-traces.o
 obj-$(CONFIG_NET_DROP_MONITOR) += drop_monitor.o
+obj-$(CONFIG_NET_CDEV) += cdev.o
 
diff --git a/net/core/cdev.c b/net/core/cdev.c
new file mode 100644
index 0000000..1f36076
--- /dev/null
+++ b/net/core/cdev.c
@@ -0,0 +1,42 @@
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/netdevice.h>
+#include <linux/device.h>
+
+/* Used for network dynamic major number */
+static dev_t netdev_devt;
+
+static int netdev_cdev_open(struct inode *inode, struct file *filep)
+{
+	/* no operations on this device are implemented */
+	return -ENOSYS;
+}
+
+static const struct file_operations netdev_cdev_fops = {
+	.owner = THIS_MODULE,
+	.open = netdev_cdev_open,
+};
+
+void netdev_cdev_alloc(void)
+{
+	alloc_chrdev_region(&netdev_devt, 0, 1<<20, "net");
+}
+
+void netdev_cdev_init(struct net_device *dev)
+{
+	cdev_init(&dev->cdev, &netdev_cdev_fops);
+	cdev_add(&dev->cdev, MKDEV(MAJOR(netdev_devt), dev->ifindex), 1);
+
+}
+
+void netdev_cdev_del(struct net_device *dev)
+{
+	if (dev->cdev.dev)
+		cdev_del(&dev->cdev);
+}
+
+void netdev_cdev_kobj_init(struct device *dev, struct net_device *net)
+{
+	if (net->cdev.dev)
+		dev->devt = net->cdev.dev;
+}
diff --git a/net/core/cdev.h b/net/core/cdev.h
new file mode 100644
index 0000000..9cf5a90
--- /dev/null
+++ b/net/core/cdev.h
@@ -0,0 +1,13 @@
+#include <linux/netdevice.h>
+
+#ifdef CONFIG_NET_CDEV
+void netdev_cdev_alloc(void);
+void netdev_cdev_init(struct net_device *dev);
+void netdev_cdev_del(struct net_device *dev);
+void netdev_cdev_kobj_init(struct device *dev, struct net_device *net);
+#else
+static inline void netdev_cdev_alloc(void) {}
+static inline void netdev_cdev_init(struct net_device *dev) {}
+static inline void netdev_cdev_del(struct net_device *dev) {}
+static inline void netdev_cdev_kobj_init(struct device *dev, struct net_device *net) {}
+#endif
diff --git a/net/core/dev.c b/net/core/dev.c
index b8f74cf..c4ebfcd 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -129,6 +129,7 @@
 #include <trace/events/napi.h>
 
 #include "net-sysfs.h"
+#include "cdev.h"
 
 /* Instead of increasing this, you should create a hash table. */
 #define MAX_GRO_SKBS 8
@@ -4684,6 +4685,7 @@ static void rollback_registered(struct net_device *dev)
 
 	/* Remove entries from kobject tree */
 	netdev_unregister_kobject(dev);
+	netdev_cdev_del(dev);
 
 	synchronize_net();
 
@@ -4835,6 +4837,8 @@ int register_netdevice(struct net_device *dev)
 	if (dev->features & NETIF_F_SG)
 		dev->features |= NETIF_F_GSO;
 
+	netdev_cdev_init(dev);
+
 	netdev_initialize_kobject(dev);
 	ret = netdev_register_kobject(dev);
 	if (ret)
@@ -4864,6 +4868,7 @@ out:
 	return ret;
 
 err_uninit:
+	netdev_cdev_del(dev);
 	if (dev->netdev_ops->ndo_uninit)
 		dev->netdev_ops->ndo_uninit(dev);
 	goto out;
@@ -5371,6 +5376,7 @@ int dev_change_net_namespace(struct net_device *dev, struct net *net, const char
 	dev_addr_discard(dev);
 
 	netdev_unregister_kobject(dev);
+	netdev_cdev_del(dev);
 
 	/* Actually switch the network namespace */
 	dev_net_set(dev, net);
@@ -5387,6 +5393,8 @@ int dev_change_net_namespace(struct net_device *dev, struct net *net, const char
 			dev->iflink = dev->ifindex;
 	}
 
+	netdev_cdev_init(dev);
+
 	/* Fixup kobjects */
 	err = netdev_register_kobject(dev);
 	WARN_ON(err);
@@ -5620,6 +5628,8 @@ static int __init net_dev_init(void)
 
 	BUG_ON(!dev_boot_phase);
 
+	netdev_cdev_alloc();
+
 	if (dev_proc_init())
 		goto out;
 
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 821d309..ba0af79 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -19,6 +19,7 @@
 #include <net/wext.h>
 
 #include "net-sysfs.h"
+#include "cdev.h"
 
 #ifdef CONFIG_SYSFS
 static const char fmt_hex[] = "%#x\n";
@@ -461,6 +462,14 @@ static void netdev_release(struct device *d)
 	kfree((char *)dev - dev->padded);
 }
 
+#ifdef CONFIG_NET_CDEV
+static char *netdev_devnode(struct device *d, mode_t *mode)
+{
+	struct net_device *dev = to_net_dev(d);
+	return kasprintf(GFP_KERNEL, "netdev/%s", dev->name);
+}
+#endif
+
 static struct class net_class = {
 	.name = "net",
 	.dev_release = netdev_release,
@@ -470,6 +479,9 @@ static struct class net_class = {
 #ifdef CONFIG_HOTPLUG
 	.dev_uevent = netdev_uevent,
 #endif
+#ifdef CONFIG_NET_CDEV
+	.devnode = netdev_devnode,
+#endif
 };
 
 /* Delete sysfs entries but hold kobject reference until after all
@@ -496,6 +508,7 @@ int netdev_register_kobject(struct net_device *net)
 	dev->class = &net_class;
 	dev->platform_data = net;
 	dev->groups = groups;
+	netdev_cdev_kobj_init(dev, net);
 
 	dev_set_name(dev, "%s", net->name);
 
--

With regards,
Narendra K

Re: PATCH: Network Device Naming mechanism and policy

[Bryan Kadzban]

[-- Attachment #1: Type: text/plain, Size: 1223 bytes --]

Jordan_Hargrave@Dell.com wrote:
> example udev config:
> SUBSYSTEM=="net", SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"

So say I have two NICs, currently named eth0/eth1, and I keep them using
those names via the current udev MAC address rules.  Furthermore, say
that this patch is applied, and so I start using 0.<addr0> and 1.<addr1>
in my network configuration, instead of eth0/eth1.

Now, say that on some given boot, these two NICs show up to the kernel
in a different order.  I might move them around in the machine (this is,
after all, the point behind using the MAC as the identifier ;-) ), or
one of them might be USB, or something else random changes the order.
With this rule, they're now at 0.<addr1> and 1.<addr0>.

In other words, these names are not actually persistent.

If you get rid of the $sysfs{ifindex}, then this should work.  If that
doesn't work for what you're trying to do for some reason, then you can
make another directory of symlinks by-ifindex, and use that; that should
work as well.  But coupling the ifindex to the MAC address like this
doesn't work.  (In general, coupling any two unrelated attributes when
trying to do persistent names doesn't work.)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 260 bytes --]

Re: PATCH: Network Device Naming mechanism and policy

[Bryan Kadzban]

[-- Attachment #1: Type: text/plain, Size: 1223 bytes --]

Jordan_Hargrave@Dell.com wrote:
> example udev config:
> SUBSYSTEM=="net", SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"

So say I have two NICs, currently named eth0/eth1, and I keep them using
those names via the current udev MAC address rules.  Furthermore, say
that this patch is applied, and so I start using 0.<addr0> and 1.<addr1>
in my network configuration, instead of eth0/eth1.

Now, say that on some given boot, these two NICs show up to the kernel
in a different order.  I might move them around in the machine (this is,
after all, the point behind using the MAC as the identifier ;-) ), or
one of them might be USB, or something else random changes the order.
With this rule, they're now at 0.<addr1> and 1.<addr0>.

In other words, these names are not actually persistent.

If you get rid of the $sysfs{ifindex}, then this should work.  If that
doesn't work for what you're trying to do for some reason, then you can
make another directory of symlinks by-ifindex, and use that; that should
work as well.  But coupling the ifindex to the MAC address like this
doesn't work.  (In general, coupling any two unrelated attributes when
trying to do persistent names doesn't work.)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 260 bytes --]

RE: PATCH: Network Device Naming mechanism and policy

[Jordan_Hargrave]

-----Original Message-----
From: Ben Hutchings [mailto:bhutchings@solarflare.com]
Sent: Wed 8/19/2009 14:26
To: Hargrave, Jordan
Cc: netdev@vger.kernel.org; linux-hotplug@vger.kernel.org
Subject: Re: PATCH: Network Device Naming mechanism and policy
 
On Wed, 2009-08-19 at 13:56 -0500, Jordan_Hargrave@Dell.com wrote:
> This is from an old discussion several months ago:
> http://lkml.org/lkml/2009/3/24/357
> http://lkml.org/lkml/2009/3/24/380
> 
> Basically the issue is that between a race in udev and PCI scan order the ethX IDs may not
> be consistent between reboots.  The idea is to use a mechanism similar to how disks now can
> be accessed by their LABEL/PATH/UUID instead of raw /dev/sdX ids.
> 
> example udev config:
> SUBSYSTEM=="net", SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> SUBSYSTEM=="net", PROGRAM="/sbin/biosdevname -i %k --policy=all_names", SYMLINK+="net/by-chassis-id/%c"
> 
> The following patch will create a device node for network devices based off their ifindex;
> udev can then use this device node for creating symlinks in /dev/net/xxxx similar to the
> way that disks now use by-label and by-path symlinks.
> 
> Combining this with the biosdevname utility and patches to common network utilities,
> it could be possible to access ethernet devices by their PCI path or BIOS Label.
> 
> eg. ifconfig Embedded_NIC_1

Nice idea, but wouldn't it be "ifconfig LABEL=Embedded_NIC_1"?

** Still debating that.. if ifconfig and other tools were smart enough to figure it out
** Right now we have a library that lets you specify it by device node:
** ifconfig /dev/net/by-chassis-id/eth0_s0 for example

> --- include/linux/major.h~	2009-07-30 18:34:47.000000000 -0400
> +++ include/linux/major.h	2009-08-05 14:52:10.000000000 -0400
> @@ -169,6 +169,7 @@
>  #define IBM_FS3270_MAJOR	228
>  
>  #define VIOTAPE_MAJOR		230
> +#define NETDEV_MAJOR		234
>  
>  #define BLOCK_EXT_MAJOR		259
>  #define SCSI_OSD_MAJOR		260	/* open-osd's OSD scsi device */
> --- net/core/net-sysfs.cx	2009-08-05 15:00:13.000000000 -0400
> +++ net/core/net-sysfs.c	2009-08-05 15:01:20.000000000 -0400
> @@ -11,6 +11,7 @@
>  
>  #include <linux/capability.h>
>  #include <linux/kernel.h>
> +#include <linux/major.h>
>  #include <linux/netdevice.h>
>  #include <linux/if_arp.h>
>  #include <net/sock.h>
> @@ -496,6 +497,7 @@ int netdev_register_kobject(struct net_d
>  	dev->class = &net_class;
>  	dev->platform_data = net;
>  	dev->groups = groups;
> +	dev->devt = MKDEV(NETDEV_MAJOR, net->ifindex);
[...]

Since this major number is unregistered, the device inode can only be
stat'd and not open'd, which seems like a bit of a hack.  Is there
anything that would stop register_chrdev(0, ...) from allocating this
major number, causing network devices to be confused with some other
device type?

** yeah a bit of a hack.. I suppose the netdev code could allocate a 
** dynamic major node at startup with register_chrdev.. since nothing
** would use the hardcoded major:minor #s anyway (yet).

Maybe there *should* be character devices for network device
manipulation.  It seems like that would avoid the race conditions that
device renaming and removal causes for name-based socket ioctls.  But
maybe everyone should be using netlink for that instead.

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

RE: PATCH: Network Device Naming mechanism and policy

[Jordan_Hargrave]

-----Original Message-----
From: Ben Hutchings [mailto:bhutchings@solarflare.com]
Sent: Wed 8/19/2009 14:26
To: Hargrave, Jordan
Cc: netdev@vger.kernel.org; linux-hotplug@vger.kernel.org
Subject: Re: PATCH: Network Device Naming mechanism and policy
 
On Wed, 2009-08-19 at 13:56 -0500, Jordan_Hargrave@Dell.com wrote:
> This is from an old discussion several months ago:
> http://lkml.org/lkml/2009/3/24/357
> http://lkml.org/lkml/2009/3/24/380
> 
> Basically the issue is that between a race in udev and PCI scan order the ethX IDs may not
> be consistent between reboots.  The idea is to use a mechanism similar to how disks now can
> be accessed by their LABEL/PATH/UUID instead of raw /dev/sdX ids.
> 
> example udev config:
> SUBSYSTEM="net", SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> SUBSYSTEM="net", PROGRAM="/sbin/biosdevname -i %k --policy=all_names", SYMLINK+="net/by-chassis-id/%c"
> 
> The following patch will create a device node for network devices based off their ifindex;
> udev can then use this device node for creating symlinks in /dev/net/xxxx similar to the
> way that disks now use by-label and by-path symlinks.
> 
> Combining this with the biosdevname utility and patches to common network utilities,
> it could be possible to access ethernet devices by their PCI path or BIOS Label.
> 
> eg. ifconfig Embedded_NIC_1

Nice idea, but wouldn't it be "ifconfig LABEL=Embedded_NIC_1"?

** Still debating that.. if ifconfig and other tools were smart enough to figure it out
** Right now we have a library that lets you specify it by device node:
** ifconfig /dev/net/by-chassis-id/eth0_s0 for example

> --- include/linux/major.h~	2009-07-30 18:34:47.000000000 -0400
> +++ include/linux/major.h	2009-08-05 14:52:10.000000000 -0400
> @@ -169,6 +169,7 @@
>  #define IBM_FS3270_MAJOR	228
>  
>  #define VIOTAPE_MAJOR		230
> +#define NETDEV_MAJOR		234
>  
>  #define BLOCK_EXT_MAJOR		259
>  #define SCSI_OSD_MAJOR		260	/* open-osd's OSD scsi device */
> --- net/core/net-sysfs.cx	2009-08-05 15:00:13.000000000 -0400
> +++ net/core/net-sysfs.c	2009-08-05 15:01:20.000000000 -0400
> @@ -11,6 +11,7 @@
>  
>  #include <linux/capability.h>
>  #include <linux/kernel.h>
> +#include <linux/major.h>
>  #include <linux/netdevice.h>
>  #include <linux/if_arp.h>
>  #include <net/sock.h>
> @@ -496,6 +497,7 @@ int netdev_register_kobject(struct net_d
>  	dev->class = &net_class;
>  	dev->platform_data = net;
>  	dev->groups = groups;
> +	dev->devt = MKDEV(NETDEV_MAJOR, net->ifindex);
[...]

Since this major number is unregistered, the device inode can only be
stat'd and not open'd, which seems like a bit of a hack.  Is there
anything that would stop register_chrdev(0, ...) from allocating this
major number, causing network devices to be confused with some other
device type?

** yeah a bit of a hack.. I suppose the netdev code could allocate a 
** dynamic major node at startup with register_chrdev.. since nothing
** would use the hardcoded major:minor #s anyway (yet).

Maybe there *should* be character devices for network device
manipulation.  It seems like that would avoid the race conditions that
device renaming and removal causes for name-based socket ioctls.  But
maybe everyone should be using netlink for that instead.

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: PATCH: Network Device Naming mechanism and policy

[Ben Hutchings]

On Wed, 2009-08-19 at 13:56 -0500, Jordan_Hargrave@Dell.com wrote:
> This is from an old discussion several months ago:
> http://lkml.org/lkml/2009/3/24/357
> http://lkml.org/lkml/2009/3/24/380
> 
> Basically the issue is that between a race in udev and PCI scan order the ethX IDs may not
> be consistent between reboots.  The idea is to use a mechanism similar to how disks now can
> be accessed by their LABEL/PATH/UUID instead of raw /dev/sdX ids.
> 
> example udev config:
> SUBSYSTEM=="net", SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> SUBSYSTEM=="net", PROGRAM="/sbin/biosdevname -i %k --policy=all_names", SYMLINK+="net/by-chassis-id/%c"
> 
> The following patch will create a device node for network devices based off their ifindex;
> udev can then use this device node for creating symlinks in /dev/net/xxxx similar to the
> way that disks now use by-label and by-path symlinks.
> 
> Combining this with the biosdevname utility and patches to common network utilities,
> it could be possible to access ethernet devices by their PCI path or BIOS Label.
> 
> eg. ifconfig Embedded_NIC_1

Nice idea, but wouldn't it be "ifconfig LABEL=Embedded_NIC_1"?

> --- include/linux/major.h~	2009-07-30 18:34:47.000000000 -0400
> +++ include/linux/major.h	2009-08-05 14:52:10.000000000 -0400
> @@ -169,6 +169,7 @@
>  #define IBM_FS3270_MAJOR	228
>  
>  #define VIOTAPE_MAJOR		230
> +#define NETDEV_MAJOR		234
>  
>  #define BLOCK_EXT_MAJOR		259
>  #define SCSI_OSD_MAJOR		260	/* open-osd's OSD scsi device */
> --- net/core/net-sysfs.cx	2009-08-05 15:00:13.000000000 -0400
> +++ net/core/net-sysfs.c	2009-08-05 15:01:20.000000000 -0400
> @@ -11,6 +11,7 @@
>  
>  #include <linux/capability.h>
>  #include <linux/kernel.h>
> +#include <linux/major.h>
>  #include <linux/netdevice.h>
>  #include <linux/if_arp.h>
>  #include <net/sock.h>
> @@ -496,6 +497,7 @@ int netdev_register_kobject(struct net_d
>  	dev->class = &net_class;
>  	dev->platform_data = net;
>  	dev->groups = groups;
> +	dev->devt = MKDEV(NETDEV_MAJOR, net->ifindex);
[...]

Since this major number is unregistered, the device inode can only be
stat'd and not open'd, which seems like a bit of a hack.  Is there
anything that would stop register_chrdev(0, ...) from allocating this
major number, causing network devices to be confused with some other
device type?

Maybe there *should* be character devices for network device
manipulation.  It seems like that would avoid the race conditions that
device renaming and removal causes for name-based socket ioctls.  But
maybe everyone should be using netlink for that instead.

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: PATCH: Network Device Naming mechanism and policy

[Ben Hutchings]

On Wed, 2009-08-19 at 13:56 -0500, Jordan_Hargrave@Dell.com wrote:
> This is from an old discussion several months ago:
> http://lkml.org/lkml/2009/3/24/357
> http://lkml.org/lkml/2009/3/24/380
> 
> Basically the issue is that between a race in udev and PCI scan order the ethX IDs may not
> be consistent between reboots.  The idea is to use a mechanism similar to how disks now can
> be accessed by their LABEL/PATH/UUID instead of raw /dev/sdX ids.
> 
> example udev config:
> SUBSYSTEM="net", SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
> SUBSYSTEM="net", PROGRAM="/sbin/biosdevname -i %k --policy=all_names", SYMLINK+="net/by-chassis-id/%c"
> 
> The following patch will create a device node for network devices based off their ifindex;
> udev can then use this device node for creating symlinks in /dev/net/xxxx similar to the
> way that disks now use by-label and by-path symlinks.
> 
> Combining this with the biosdevname utility and patches to common network utilities,
> it could be possible to access ethernet devices by their PCI path or BIOS Label.
> 
> eg. ifconfig Embedded_NIC_1

Nice idea, but wouldn't it be "ifconfig LABEL=Embedded_NIC_1"?

> --- include/linux/major.h~	2009-07-30 18:34:47.000000000 -0400
> +++ include/linux/major.h	2009-08-05 14:52:10.000000000 -0400
> @@ -169,6 +169,7 @@
>  #define IBM_FS3270_MAJOR	228
>  
>  #define VIOTAPE_MAJOR		230
> +#define NETDEV_MAJOR		234
>  
>  #define BLOCK_EXT_MAJOR		259
>  #define SCSI_OSD_MAJOR		260	/* open-osd's OSD scsi device */
> --- net/core/net-sysfs.cx	2009-08-05 15:00:13.000000000 -0400
> +++ net/core/net-sysfs.c	2009-08-05 15:01:20.000000000 -0400
> @@ -11,6 +11,7 @@
>  
>  #include <linux/capability.h>
>  #include <linux/kernel.h>
> +#include <linux/major.h>
>  #include <linux/netdevice.h>
>  #include <linux/if_arp.h>
>  #include <net/sock.h>
> @@ -496,6 +497,7 @@ int netdev_register_kobject(struct net_d
>  	dev->class = &net_class;
>  	dev->platform_data = net;
>  	dev->groups = groups;
> +	dev->devt = MKDEV(NETDEV_MAJOR, net->ifindex);
[...]

Since this major number is unregistered, the device inode can only be
stat'd and not open'd, which seems like a bit of a hack.  Is there
anything that would stop register_chrdev(0, ...) from allocating this
major number, causing network devices to be confused with some other
device type?

Maybe there *should* be character devices for network device
manipulation.  It seems like that would avoid the race conditions that
device renaming and removal causes for name-based socket ioctls.  But
maybe everyone should be using netlink for that instead.

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

PATCH: Network Device Naming mechanism and policy

[Jordan_Hargrave]

This is from an old discussion several months ago:
http://lkml.org/lkml/2009/3/24/357
http://lkml.org/lkml/2009/3/24/380

Basically the issue is that between a race in udev and PCI scan order the ethX IDs may not
be consistent between reboots.  The idea is to use a mechanism similar to how disks now can
be accessed by their LABEL/PATH/UUID instead of raw /dev/sdX ids.

example udev config:
SUBSYSTEM=="net", SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
SUBSYSTEM=="net", PROGRAM="/sbin/biosdevname -i %k --policy=all_names", SYMLINK+="net/by-chassis-id/%c"

The following patch will create a device node for network devices based off their ifindex;
udev can then use this device node for creating symlinks in /dev/net/xxxx similar to the
way that disks now use by-label and by-path symlinks.

Combining this with the biosdevname utility and patches to common network utilities,
it could be possible to access ethernet devices by their PCI path or BIOS Label.

eg. ifconfig Embedded_NIC_1

--- include/linux/major.h~	2009-07-30 18:34:47.000000000 -0400
+++ include/linux/major.h	2009-08-05 14:52:10.000000000 -0400
@@ -169,6 +169,7 @@
 #define IBM_FS3270_MAJOR	228
 
 #define VIOTAPE_MAJOR		230
+#define NETDEV_MAJOR		234
 
 #define BLOCK_EXT_MAJOR		259
 #define SCSI_OSD_MAJOR		260	/* open-osd's OSD scsi device */
--- net/core/net-sysfs.cx	2009-08-05 15:00:13.000000000 -0400
+++ net/core/net-sysfs.c	2009-08-05 15:01:20.000000000 -0400
@@ -11,6 +11,7 @@
 
 #include <linux/capability.h>
 #include <linux/kernel.h>
+#include <linux/major.h>
 #include <linux/netdevice.h>
 #include <linux/if_arp.h>
 #include <net/sock.h>
@@ -496,6 +497,7 @@ int netdev_register_kobject(struct net_d
 	dev->class = &net_class;
 	dev->platform_data = net;
 	dev->groups = groups;
+	dev->devt = MKDEV(NETDEV_MAJOR, net->ifindex);
 
 	BUILD_BUG_ON(BUS_ID_SIZE < IFNAMSIZ);
 	dev_set_name(dev, "%s", net->name);


--jordan hargrave
Dell Enterprise Linux Engineering

PATCH: Network Device Naming mechanism and policy

[Jordan_Hargrave]

This is from an old discussion several months ago:
http://lkml.org/lkml/2009/3/24/357
http://lkml.org/lkml/2009/3/24/380

Basically the issue is that between a race in udev and PCI scan order the ethX IDs may not
be consistent between reboots.  The idea is to use a mechanism similar to how disks now can
be accessed by their LABEL/PATH/UUID instead of raw /dev/sdX ids.

example udev config:
SUBSYSTEM="net", SYMLINK+="net/by-mac/$sysfs{ifindex}.$sysfs{address}"
SUBSYSTEM="net", PROGRAM="/sbin/biosdevname -i %k --policy=all_names", SYMLINK+="net/by-chassis-id/%c"

The following patch will create a device node for network devices based off their ifindex;
udev can then use this device node for creating symlinks in /dev/net/xxxx similar to the
way that disks now use by-label and by-path symlinks.

Combining this with the biosdevname utility and patches to common network utilities,
it could be possible to access ethernet devices by their PCI path or BIOS Label.

eg. ifconfig Embedded_NIC_1

--- include/linux/major.h~	2009-07-30 18:34:47.000000000 -0400
+++ include/linux/major.h	2009-08-05 14:52:10.000000000 -0400
@@ -169,6 +169,7 @@
 #define IBM_FS3270_MAJOR	228
 
 #define VIOTAPE_MAJOR		230
+#define NETDEV_MAJOR		234
 
 #define BLOCK_EXT_MAJOR		259
 #define SCSI_OSD_MAJOR		260	/* open-osd's OSD scsi device */
--- net/core/net-sysfs.cx	2009-08-05 15:00:13.000000000 -0400
+++ net/core/net-sysfs.c	2009-08-05 15:01:20.000000000 -0400
@@ -11,6 +11,7 @@
 
 #include <linux/capability.h>
 #include <linux/kernel.h>
+#include <linux/major.h>
 #include <linux/netdevice.h>
 #include <linux/if_arp.h>
 #include <net/sock.h>
@@ -496,6 +497,7 @@ int netdev_register_kobject(struct net_d
 	dev->class = &net_class;
 	dev->platform_data = net;
 	dev->groups = groups;
+	dev->devt = MKDEV(NETDEV_MAJOR, net->ifindex);
 
 	BUILD_BUG_ON(BUS_ID_SIZE < IFNAMSIZ);
 	dev_set_name(dev, "%s", net->name);


--jordan hargrave
Dell Enterprise Linux Engineering