2.6.31.6 freezes on v210

2.6.31.6 freezes on v210

[Laszlo Valko]

[-- Attachment #1: Type: text/plain, Size: 741 bytes --]

Hi all!

I'm installing a v210 with gentoo. Originally I compiled gentoo's
stable hardened 2.6.28 kernel package (which uses grsecurity), which
worked rather well.
Then I tried to upgrade the kernel to a fresh, grsecurity-patched 2.6.31.
This failed at the first boot, so I tried to see which part in this pile
introduces the bug. Eventually, I removed all nifty patches, and went
back to a plain vanilla 2.6.31.6 kernel, booted with nosmp.
And I still have the freeze, so that's why I'm here :)
(The .config came from the working 2.6.28 kernel, updated by make menuconfig)

The boot logs (good & bad) are attached, together with the .config file
of the new kernel built.

I'd appreciate any help to track down the problem.

Regards,
Laszlo

[-- Attachment #2: config-2.6.31.6 --]
[-- Type: text/plain, Size: 47727 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31.6
# Fri Nov 20 15:45:49 2009
#
CONFIG_64BIT=y
CONFIG_SPARC=y
# CONFIG_SPARC32 is not set
CONFIG_SPARC64=y
CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc64_defconfig"
CONFIG_BITS=64
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_IOMMU_HELPER=y
CONFIG_QUICKLIST=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_AUDIT_ARCH=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_MMU=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_OF=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set

#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y

#
# Performance Counters
#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_FREEZER is not set

#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_NR_CPUS=64
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_SPARC64_SMP=y
CONFIG_SPARC64_PAGE_SIZE_8KB=y
# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
CONFIG_SECCOMP=y
CONFIG_HOTPLUG_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_CPU_FREQ is not set
CONFIG_US3_MC=y
CONFIG_HUGETLB_PAGE_SIZE_4MB=y
# CONFIG_HUGETLB_PAGE_SIZE_512K is not set
# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
# CONFIG_NUMA is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_CMDLINE_BOOL is not set

#
# Bus options (PCI etc.)
#
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
CONFIG_SUN_LDOMS=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC64_PCI=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
CONFIG_NF_CONNTRACK_PPTP=m
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_NF_NAT_SNMP_BASIC is not set
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
# CONFIG_NF_NAT_IRC is not set
CONFIG_NF_NAT_TFTP=m
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_SECURITY is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_INGRESS is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=m
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
CONFIG_SUNVDC=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=m

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=m
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLOGICPTI is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SUNESP is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=m
CONFIG_MD_RAID6_PQ=m
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
# CONFIG_DM_ZERO is not set
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks.
#

#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
CONFIG_SUNQE=m
# CONFIG_SUNGEM is not set
CONFIG_CASSINI=m
# CONFIG_SUNVNET is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000E=m
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_MYRI_SBUS is not set
CONFIG_NS83820=m
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
CONFIG_BNX2=m
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
CONFIG_NIU=m
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOL2TP=m
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_SPARCSPKR is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_SUNCORE=y
# CONFIG_SERIAL_SUNZILOG is not set
CONFIG_SERIAL_SUNSU=y
CONFIG_SERIAL_SUNSU_CONSOLE=y
CONFIG_SERIAL_SUNSAB=y
CONFIG_SERIAL_SUNSAB_CONSOLE=y
# CONFIG_SERIAL_SUNHV is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_N2RNG is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_ULTRA45 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_SBUS=y
# CONFIG_FB_BW2 is not set
# CONFIG_FB_CG3 is not set
CONFIG_FB_CG6=y
CONFIG_FB_FFB=y
# CONFIG_FB_TCX is not set
# CONFIG_FB_CG14 is not set
# CONFIG_FB_P9100 is not set
# CONFIG_FB_LEO is not set
CONFIG_FB_XVR500=y
CONFIG_FB_XVR2500=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_GX=y
# CONFIG_FB_ATY_BACKLIGHT is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
# CONFIG_FONT_8x16 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_SUN8x16=y
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_SUN_CLUT224=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_BQ4802=y
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SUN4V=y
CONFIG_RTC_DRV_STARFIRE=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set

#
# TI VLYNQ
#
# CONFIG_STAGING is not set

#
# Misc Linux/SPARC drivers
#
CONFIG_SUN_OPENPROMIO=m
# CONFIG_OBP_FLASH is not set
# CONFIG_TADPOLE_TS102_UCTRL is not set
CONFIG_BBC_I2C=y
# CONFIG_ENVCTRL is not set
# CONFIG_DISPLAY7SEG is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_DCFLUSH is not set
# CONFIG_STACK_DEBUG is not set

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y

[-- Attachment #3: boot-2.6.31.6.log --]
[-- Type: text/plain, Size: 2624 bytes --]

[    0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.22.33 2007/06/18 12:45'
[    0.000000] PROMLIB: Root node compatible:
[    0.000000] Linux version 2.6.31.6 (root@qwer) (gcc version 4.3.3 (Gentoo 4.3.3 p1.0) ) #1 SMP Fri Nov 20 16:04:57 CET 2009
[    0.000000] console [earlyprom0] enabled
[    0.000000] ARCH: SUN4U
[    0.000000] Ethernet address: 00:03:ba:9f:3c:05
[    0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[    0.000000] Remapping the kernel... done.
[    0.000000] OF stdout device is: /pci@1e,600000/isa@7/serial@0,3f8
[    0.000000] PROM: Built device tree with 76914 bytes of memory.
[    0.000000] Top of RAM: 0x103fece000, Total RAM: 0x7fea8000
[    0.000000] Memory hole size: 64512MB
[    0.000000] [0000000200000000-fffff80000400000] page_structs=131072 node=0 entry=0/0
[    0.000000] [0000000200000000-fffff80000800000] page_structs=131072 node=0 entry=1/0  
[    0.000000] [0000000220000000-fffff80000c00000] page_structs=131072 node=0 entry=128/0
[    0.000000] [0000000220000000-fffff80001000000] page_structs=131072 node=0 entry=129/0
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x0081ff67
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[6] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00020000
[    0.000000]     0: 0x00800000 -> 0x0081f7ff
[    0.000000]     0: 0x0081f800 -> 0x0081fee3
[    0.000000]     0: 0x0081fee5 -> 0x0081ff4a
[    0.000000]     0: 0x0081ff50 -> 0x0081ff58
[    0.000000]     0: 0x0081ff62 -> 0x0081ff67
[    0.000000] Booting Linux...
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 195413
[    0.000000] Kernel command line: root=/dev/ram0 rw console=ttyS0,9600n8 init=/linuxrc real_root=/dev/mapper/vg-root nosmp
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes)
[    0.000000] Memory: 2065784k available (4384k kernel code, 1472k data, 232k init) [fffff80000000000,000000103fece000]
[    0.000000] NR_IRQS:255
[    0.000000] clocksource: mult[535555] shift[16]
[    0.000000] clockevent: mult[3126e97] shift[32]
[   31.880512] Console: colour dummy device 80x25
[   32.088956] Calibrating delay using timer specific routine.. 24.01 BogoMIPS (lpj=120054)
[   32.195437] Security Framework initialized
[   32.249248] Mount-cache hash table entries: 512
[   32.309503] Brought up 1 CPUs
[   32.349684] NET: Registered protocol family 16
[   32.41          

[-- Attachment #4: boot-2.6.28-hardened-r9.log --]
[-- Type: text/plain, Size: 16304 bytes --]

[    0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.22.33 2007/06/18 12:45'
[    0.000000] PROMLIB: Root node compatible: 
[    0.000000] Linux version 2.6.28-hardened-r9 (root@qwer) (gcc version 4.3.3 (Gentoo 4.3.3 p1.0) ) #3 SMP Sat Nov 14 01:35:11 CET 2009
[    0.000000] console [earlyprom0] enabled
[    0.000000] ARCH: SUN4U
[    0.000000] Ethernet address: 00:03:ba:9f:3c:05
[    0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[    0.000000] Remapping the kernel... done.
[    0.000000] OF stdout device is: /pci@1e,600000/isa@7/serial@0,3f8
[    0.000000] PROM: Built device tree with 76914 bytes of memory.
[    0.000000] Top of RAM: 0x103fece000, Total RAM: 0x7fea8000
[    0.000000] Memory hole size: 64512MB
[    0.000000] [0000000200000000-fffff80000400000] page_structs=131072 node=0 entry=0/0
[    0.000000] [0000000200000000-fffff80000800000] page_structs=131072 node=0 entry=1/0
[    0.000000] [0000000220000000-fffff80000c00000] page_structs=131072 node=0 entry=128/0
[    0.000000] [0000000220000000-fffff80001000000] page_structs=131072 node=0 entry=129/0
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x0081ff67
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[6] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00020000
[    0.000000]     0: 0x00800000 -> 0x0081f7ff
[    0.000000]     0: 0x0081f800 -> 0x0081fee3
[    0.000000]     0: 0x0081fee5 -> 0x0081ff4a
[    0.000000]     0: 0x0081ff50 -> 0x0081ff58
[    0.000000]     0: 0x0081ff62 -> 0x0081ff67
[    0.000000] On node 0 totalpages: 261972
[    0.000000]   Normal zone: 66559 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 195413 pages, LIFO batch:15
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Booting Linux...
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 195413
[    0.000000] Kernel command line: root=/dev/ram0 rw console=ttyS0,9600n8 init=/linuxrc real_root=/dev/mapper/vg-root
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] clocksource: mult[535555] shift[16]
[    0.000000] clockevent: mult[3126e97] shift[32]
[   37.903468] Console: colour dummy device 80x25
[   37.964923] Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes)
[   38.066705] Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes)
[   38.249083] Memory: 2064192k available (4120k kernel code, 1368k data, 208k init) [fffff80000000000,000000103fece000]
[   38.538730] Calibrating delay using timer specific routine.. 24.01 BogoMIPS (lpj=120064)
[   38.645231] Security Framework initialized
[   38.699110] Mount-cache hash table entries: 512
[   38.760357] CPU 0: synchronized TICK with master CPU (last diff 0 cycles, maxerr 7 cycles)
[   38.760370] Brought up 2 CPUs
[   38.760919] net_namespace: 912 bytes
[   38.954997] NET: Registered protocol family 16
[   39.024177] /pci@1f,700000: TOMATILLO PCI Bus Module ver[4:0]
[   39.099703] /pci@1f,700000: PCI IO[7f601000000] MEM[7f700000000]
[   39.180424] PCI: Scanning PBM /pci@1f,700000
[   39.236785] pci 0000:00:02.0: PME# supported from D3hot
[   39.305455] pci 0000:00:02.0: PME# disabled
[   39.360540] pci 0000:00:02.1: PME# supported from D3hot
[   39.429270] pci 0000:00:02.1: PME# disabled
[   39.484613] /pci@1e,600000: TOMATILLO PCI Bus Module ver[4:0]
[   39.560196] /pci@1e,600000: PCI IO[7fe01000000] MEM[7ff00000000]
[   39.640823] PCI: Scanning PBM /pci@1e,600000
[   39.697234] pci 0001:00:06.0: quirk: region 0800-083f claimed by ali7101 ACPI
[   39.791024] pci 0001:00:06.0: quirk: region 0600-061f claimed by ali7101 SMB
[   39.883705] pci 0001:00:0a.0: PME# supported from D3cold
[   39.953532] pci 0001:00:0a.0: PME# disabled
[   40.009291] /pci@1c,600000: TOMATILLO PCI Bus Module ver[4:0]
[   40.084863] /pci@1c,600000: PCI IO[7ce01000000] MEM[7cf00000000]
[   40.165506] PCI: Scanning PBM /pci@1c,600000
[   40.221862] pci 0002:00:02.0: supports D1 D2
[   40.221919] pci 0002:00:02.1: supports D1 D2
[   40.222370] /pci@1d,700000: TOMATILLO PCI Bus Module ver[4:0]
[   40.297916] /pci@1d,700000: PCI IO[7c601000000] MEM[7c700000000]
[   40.378590] PCI: Scanning PBM /pci@1d,700000
[   40.434915] pci 0003:00:02.0: PME# supported from D3hot
[   40.503575] pci 0003:00:02.0: PME# disabled
[   40.558535] pci 0003:00:02.1: PME# supported from D3hot
[   40.627195] pci 0003:00:02.1: PME# disabled
[   40.690272] SCSI subsystem initialized
[   40.739886] usbcore: registered new interface driver usbfs
[   40.812103] usbcore: registered new interface driver hub
[   40.882125] usbcore: registered new device driver usb
[   41.028839] /pci@1e,600000/isa@7/rtc@0,70: RTC regs at 0x7fe01000070
[   41.114676] NET: Registered protocol family 2
[   41.171941] Switched to high resolution mode on CPU 1
[   41.174996] Switched to high resolution mode on CPU 0
[   41.274647] IP route cache hash table entries: 65536 (order: 6, 524288 bytes)
[   41.369812] TCP established hash table entries: 262144 (order: 9, 4194304 bytes)
[   41.477651] TCP bind hash table entries: 65536 (order: 7, 1048576 bytes)
[   41.568473] TCP: Hash tables configured (established 262144 bind 65536)
[   41.655431] TCP reno registered
[   41.724710] NET: Registered protocol family 1
[   41.782277] checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
[   42.084121] Freeing initrd memory: 2354k freed
[   42.142827] power: Control reg at 7fe01000800
[   42.200495] chmc: UltraSPARC-IIIi memory controller at /memory-controller@0,0
[   42.294386] chmc: UltraSPARC-IIIi memory controller at /memory-controller@1,0
[   42.389695] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[   42.474162] fuse init (API version 7.10)
[   42.525940] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[   42.641140] SGI XFS Quota Management subsystem
[   42.699572] msgmni has been set to 4037
[   42.752024] alg: No test for stdrng (krng)
[   42.806046] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   42.903353] io scheduler noop registered
[   42.954813] io scheduler anticipatory registered (default)
[   43.026867] io scheduler deadline registered
[   43.082955] io scheduler cfq registered
[   43.133383] pci 0001:00:07.0: nv_msi_ht_cap_quirk didn't locate host bridge
[   43.224948] pci 0001:00:07.0: Activating ISA DMA hang workarounds
[   43.305035] pci 0001:00:06.0: nv_msi_ht_cap_quirk didn't locate host bridge
[   43.396629] pci 0001:00:0a.0: nv_msi_ht_cap_quirk didn't locate host bridge
[   43.488239] pci 0001:00:0d.0: nv_msi_ht_cap_quirk didn't locate host bridge
[   43.589883] f00a6f7c: ttyS0 at MMIO 0x7fe010003f8 (irq = 15) is a 16550A
[   43.677982] Console: ttyS0 (SU)
[   43.719152] console handover: boot [earlyprom0] -> real [ttyS0]
[   43.797165] f00a8afc: ttyS1 at MMIO 0x7fe010002e8 (irq = 15) is a 16550A
[   43.885805] Serial: 8250/16550 driver2 ports, IRQ sharing disabled
[   43.971805] brd: module loaded
[   44.013939] loop: module loaded
[   44.055627] nbd: registered device at major 43
[   44.118445] PPP generic driver version 2.4.2
[   44.175129] PCI: Enabling device: (0002:00:02.0), cmd 147
[   44.175715] sym0: <1010-66> rev 0x1 at pci 0002:00:02.0 irq 24
[   44.254484] sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
[   44.372914] sym0: SCSI BUS has been reset.
[   44.426698] scsi0 : sym-2.2.3
[   47.405584] scsi 0:0:0:0: Direct-Access     SEAGATE  ST373307LSUN72G  0707 PQ: 0 ANSI: 3
[   47.512016]  target0:0:0: tagged command queuing enabled, command queue depth 16.
[   47.610471]  target0:0:0: Beginning Domain Validation
[   47.677144]  target0:0:0: asynchronous
[   47.729555]  target0:0:0: wide asynchronous
[   47.785997]  target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
[   47.883000]  target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
[   47.980839]  target0:0:0: Ending Domain Validation
[   48.045868] scsi 0:0:1:0: Direct-Access     SEAGATE  ST373307LSUN72G  0707 PQ: 0 ANSI: 3
[   48.152286]  target0:0:1: tagged command queuing enabled, command queue depth 16.
[   48.250646]  target0:0:1: Beginning Domain Validation
[   48.317310]  target0:0:1: asynchronous
[   48.369635]  target0:0:1: wide asynchronous
[   48.426069]  target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
[   48.522963]  target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
[   48.620804]  target0:0:1: Ending Domain Validation
[   52.515572] PCI: Enabling device: (0002:00:02.1), cmd 147
[   52.516166] sym1: <1010-66> rev 0x1 at pci 0002:00:02.1 irq 25
[   52.594941] sym1: No NVRAM, ID 7, Fast-80, LVD, parity checking
[   52.713395] sym1: SCSI BUS has been reset.
[   52.767170] scsi1 : sym-2.2.3
[   60.266485] Driver 'sd' needs updating - please use bus_type methods
[   60.350704] sd 0:0:0:0: [sda] 143374738 512-byte hardware sectors: (73.4 GB/68.3 GiB)
[   60.455205] sd 0:0:0:0: [sda] Write Protect is off
[   60.518097] sd 0:0:0:0: [sda] Mode Sense: db 00 10 08
[   60.520258] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[   60.634166] sd 0:0:0:0: [sda] 143374738 512-byte hardware sectors: (73.4 GB/68.3 GiB)
[   60.738751] sd 0:0:0:0: [sda] Write Protect is off
[   60.801647] sd 0:0:0:0: [sda] Mode Sense: db 00 10 08
[   60.803811] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[   60.917061]  sda: sda1 sda2 sda3 sda4
[   60.974211] sd 0:0:0:0: [sda] Attached SCSI disk
[   61.035567] sd 0:0:1:0: [sdb] 143374738 512-byte hardware sectors: (73.4 GB/68.3 GiB)
[   61.140097] sd 0:0:1:0: [sdb] Write Protect is off
[   61.202997] sd 0:0:1:0: [sdb] Mode Sense: db 00 10 08
[   61.205157] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[   61.319016] sd 0:0:1:0: [sdb] 143374738 512-byte hardware sectors: (73.4 GB/68.3 GiB)
[   61.423541] sd 0:0:1:0: [sdb] Write Protect is off
[   61.486432] sd 0:0:1:0: [sdb] Mode Sense: db 00 10 08
[   61.488594] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[   61.601840]  sdb: sdb1 sdb2 sdb3 sdb4
[   61.662489] sd 0:0:1:0: [sdb] Attached SCSI disk
[   61.723686] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   61.804967] PCI: Enabling device: (0001:00:0a.0), cmd 2
[   61.804983] ohci_hcd 0001:00:0a.0: OHCI Host Controller
[   61.873844] ohci_hcd 0001:00:0a.0: new USB bus registered, assigned bus number 1
[   61.971112] ohci_hcd 0001:00:0a.0: irq 17, io mem 0x7ff01000000
[   62.106164] usb usb1: configuration #1 chosen from 1 choice
[   62.179606] hub 1-0:1.0: USB hub found
[   62.228845] hub 1-0:1.0: 2 ports detected
[   62.282297] mice: PS/2 mouse device common for all mice
[   62.351207] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[   62.434726] rtc0: alarms up to one no, 114 bytes nvram
[   62.502982] md: linear personality registered for level -1
[   62.575067] md: raid0 personality registered for level 0
[   62.644834] md: raid1 personality registered for level 1
[   62.714595] md: raid10 personality registered for level 10
[   62.786948] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[   62.900385] usbcore: registered new interface driver hiddev
[   62.973726] usbcore: registered new interface driver usbhid
[   63.046908] usbhid: v2.6:USB HID core driver
[   63.104209] TCP cubic registered
[   63.146523] NET: Registered protocol family 17
[   63.204981] Bridge firewalling registered
[   63.257997] RPC: Registered udp transport module.
[   63.319743] RPC: Registered tcp transport module.
[   63.381505] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[   63.470713] All bugs added by David S. Miller <davem@redhat.com>
[   63.550520] rtc_cmos rtc_cmos: setting system clock to 2009-11-20 19:47:36 UTC (1258746456)
[   63.660465] md: Waiting for all devices to be available before autodetect
[   63.749691] md: If you don't use raid, use raid=noautodetect
[   63.824418] md: Autodetecting RAID arrays.
[   63.901286] md: Scanned 4 and added 4 devices.
[   63.959621] md: autorun ...
[   63.996211] md: considering sdb2 ...
[   64.043119] md:  adding sdb2 ...
[   64.085427] md: sdb1 has different UUID to sdb2
[   64.144911] md:  adding sda2 ...
[   64.187219] md: sda1 has different UUID to sdb2
[   64.246996] md: created md1
[   64.283606] md: bind<sda2>
[   64.319080] md: bind<sdb2>
[   64.354537] md: running: <sdb2><sda2>
[   64.402852] raid1: raid set md1 active with 2 out of 2 mirrors
[   64.479654] md: considering sdb1 ...
[   64.526608] md:  adding sdb1 ...
[   64.568923] md:  adding sda1 ...
[   64.611231] md: created md0
[   64.647829] md: bind<sda1>
[   64.683307] md: bind<sdb1>
[   64.718761] md: running: <sdb1><sda1>
[   64.767057] raid1: raid set md0 active with 2 out of 2 mirrors
[   64.843864] md: ... autorun DONE.
[   64.887491] RAMDISK: Compressed image found at block 0
[   65.163570] VFS: Mounted root (ext2 filesystem).
[   65.559397]  md0: p1 p2 p3 p4
[   65.559707] md0: p1 size 193344 limited to end of disk
[   65.559834] md0: p2 ignored, start 193344 is behind the end of the disk
[   65.559841] md0: p3 size 143349312 limited to end of disk
[   65.559892] md0: p4 ignored, start 488448 is behind the end of the disk
[   65.607230]  md1: unknown partition table
[   66.266195] UDF-fs: No VRS found
[   66.266891] Filesystem "dm-3": Disabling barriers, trial barrier write failed
[   66.272151] XFS mounting filesystem dm-3
[  126.625202] Ending clean XFS mount for filesystem: dm-3
[  127.912233] udev: starting version 141
[  127.912307] udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
[  128.668683] tg3.c:v3.94 (August 14, 2008)
[  128.668714] PCI: Enabling device: (0000:00:02.0), cmd 2
[  128.708744] Uniform Multi-Platform E-IDE driver
[  128.898994] tg3: eth%d: Cannot get nvarm lock, tg3_nvram_init failed.
[  129.229942] eth0: Tigon3 [partno(none) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:03:ba:9f:3c:05
[  129.229954] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[  129.229962] eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
[  129.230008] PCI: Enabling device: (0000:00:02.1), cmd 2
[  129.264576] alim15x3 0001:00:0d.0: IDE controller (0x10b9:0x5229 rev 0xc4)
[  129.264598] PCI: Enabling device: (0001:00:0d.0), cmd 5
[  129.264672] alim15x3 0001:00:0d.0: 100% native mode on irq 18
[  129.264687]     ide0: BM-DMA at 0x7fe01000920-0x7fe01000927
[  129.264721] alim15x3 0001:00:0d.0: simplex device: DMA forced
[  129.264728]     ide1: BM-DMA at 0x7fe01000928-0x7fe0100092f
[  129.264747] Probing IDE interface ide0...
[  129.341002] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  129.341078] sd 0:0:1:0: Attached scsi generic sg1 type 0
[  129.440375] tg3: eth%d: Cannot get nvarm lock, tg3_nvram_init failed.
[  129.778046] eth1: Tigon3 [partno(none) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:03:ba:9f:3c:06
[  129.778057] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[  129.778064] eth1: dma_rwctrl[763f0000] dma_mask[32-bit]
[  129.778120] PCI: Enabling device: (0003:00:02.0), cmd 2
[  129.924186] Probing IDE interface ide1...
[  129.977476] tg3: eth%d: Cannot get nvarm lock, tg3_nvram_init failed.
[  130.315366] eth2: Tigon3 [partno(none) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:03:ba:9f:3c:07
[  130.315377] eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[  130.315384] eth2: dma_rwctrl[763f0000] dma_mask[32-bit]
[  130.315422] PCI: Enabling device: (0003:00:02.1), cmd 2
[  130.516943] tg3: eth%d: Cannot get nvarm lock, tg3_nvram_init failed.
[  130.524214] ide0 at 0x7fe01000900-0x7fe01000907,0x7fe0100091a on irq 18
[  130.524238] ide1 at 0x7fe01000910-0x7fe01000917,0x7fe0100090a on irq 18
[  130.856482] eth3: Tigon3 [partno(none) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:03:ba:9f:3c:08
[  130.856493] eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[  130.856500] eth3: dma_rwctrl[763f0000] dma_mask[32-bit]

Re: 2.6.31.6 freezes on v210

[David Miller]

From: Laszlo Valko <valko@linux.karinthy.hu>
Date: Fri, 20 Nov 2009 21:02:49 +0100

> I'd appreciate any help to track down the problem.

It's a well known issue we've been trying to track down for some time
now.  We still have no real idea what the exact problem is.

Somone has a remote console setup for me to diagnose this remotely
since none of my own systems trigger this behavior.

Re: 2.6.31.6 freezes on v210

[Josip Rodin]

On Fri, Nov 20, 2009 at 02:49:51PM -0800, David Miller wrote:
> It's a well known issue we've been trying to track down for some time
> now.  We still have no real idea what the exact problem is.
> 
> Somone has a remote console setup for me to diagnose this remotely
> since none of my own systems trigger this behavior.

Is this the same NMI watchdog issue that I reported with v240?
Is that last sentence incomplete (s/has/has to do/)?

-- 
     2. That which causes joy or happiness.

Re: 2.6.31.6 freezes on v210

[David Miller]

From: Josip Rodin <joy@entuzijast.net>
Date: Sat, 21 Nov 2009 00:48:56 +0100

> On Fri, Nov 20, 2009 at 02:49:51PM -0800, David Miller wrote:
>> It's a well known issue we've been trying to track down for some time
>> now.  We still have no real idea what the exact problem is.
>> 
>> Somone has a remote console setup for me to diagnose this remotely
>> since none of my own systems trigger this behavior.
> 
> Is this the same NMI watchdog issue that I reported with v240?

No, it's the one where the system hangs in the middle of firing
a uevent after the first device registers.

> Is that last sentence incomplete (s/has/has to do/)?

No it is not, Hermann Lauer is the person who has set this
up for me.

Re: 2.6.31.6 freezes on v210

[Laszlo Valko]

On Fri, Nov 20, 2009 at 02:49:51PM -0800, David Miller wrote:
> From: Laszlo Valko <valko@linux.karinthy.hu>
> Date: Fri, 20 Nov 2009 21:02:49 +0100
> 
> > I'd appreciate any help to track down the problem.
> 
> It's a well known issue we've been trying to track down for some time
> now.  We still have no real idea what the exact problem is.
> 
> Somone has a remote console setup for me to diagnose this remotely
> since none of my own systems trigger this behavior.

Does it help if I try to narrow this down both the kernel version introducing
this, and the minimum set of config options with which I can still
reproduce it?

Regards,
Laszlo

Re: 2.6.31.6 freezes on v210

[David Miller]

From: Laszlo Valko <valko@linux.karinthy.hu>
Date: Sat, 21 Nov 2009 05:47:43 +0100

> Does it help if I try to narrow this down both the kernel version
> introducing this, and the minimum set of config options with which I
> can still reproduce it?

The most useful thing would be if you could use GIT to
bisect down to the exact commit which introduced the
problem.

Re: 2.6.31.6 freezes on v210

[Laszlo Valko]

On Fri, Nov 20, 2009 at 09:43:46PM -0800, David Miller wrote:
> From: Laszlo Valko <valko@linux.karinthy.hu>
> Date: Sat, 21 Nov 2009 05:47:43 +0100
> 
> > Does it help if I try to narrow this down both the kernel version
> > introducing this, and the minimum set of config options with which I
> > can still reproduce it?
> 
> The most useful thing would be if you could use GIT to
> bisect down to the exact commit which introduced the
> problem.

Okay, I'm almost done with the config options (almost everything is off,
except for a few cpu & memory flags, and I still get the freeze, I
switched everything off, now it ends after
[  103.151812] turn off boot console earlyprom0
probably I managed to get rid of the console device :),
if you give me some advice on how to use git, I can probably manage it.

Regards,
Laszlo

Re: 2.6.31.6 freezes on v210

[Josip Rodin]

On Sat, Nov 21, 2009 at 06:54:44AM +0100, Laszlo Valko wrote:
> Okay, I'm almost done with the config options (almost everything is off,
> except for a few cpu & memory flags, and I still get the freeze, I
> switched everything off, now it ends after
> [  103.151812] turn off boot console earlyprom0
> probably I managed to get rid of the console device :),

This sounds like CONFIG_PROM_CONSOLE which you should disable in any
version (it was later removed).

> if you give me some advice on how to use git, I can probably manage it.

Get a tree like this:

git clone git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-2.6-stable.git

(That is going to take some time.)

Then follow the instructions manual page git-bisect(1)
http://www.kernel.org/pub/software/scm/git/docs/git-bisect.html

If you confirmed that the last good version was 2.6.28, and that the next
stable release and all after that are bad, it looks like you may want to
use a sequence like this:

git checkout v2.6.29
git bisect start
git bisect bad
git bisect good v2.6.28

You will then get the checkout in a state where it's half-way between those
two. Compile that (make) and install it (something like
gzip -c vmlinux > vmlinuz; sudo installkernel 2.6.29-rc3 vmlinuz System.map;
adjust that version as it happens in the current Makefile).

Make sure silo.conf is set up to enable you to go back, and then boot the
newly-compiled version. If it works, come back into the git tree and issue
'git bisect good'; if it doesn't, boot the previous kernel and do
'git bisect bad'. Either action will shift the checkout halfway again,
but in a different direction. Then recompile again, install, test.
Eventually you will get it down to a single commit.

-- 
     2. That which causes joy or happiness.

Re: 2.6.31.6 freezes on v210

[Josip Rodin]

On Fri, Nov 20, 2009 at 03:58:16PM -0800, David Miller wrote:
> >> Somone has a remote console setup for me to diagnose this remotely
> >> since none of my own systems trigger this behavior.
> > 
> > Is this the same NMI watchdog issue that I reported with v240?
> 
> No, it's the one where the system hangs in the middle of firing
> a uevent after the first device registers.
> 
> > Is that last sentence incomplete (s/has/has to do/)?
> 
> No it is not, Hermann Lauer is the person who has set this
> up for me.

OK. Just in case, if you're interested, I can give you access to our v240s
regarding that other problem.

-- 
     2. That which causes joy or happiness.

Re: 2.6.31.6 freezes on v210

[Hermann Lauer]

On Sat, Nov 21, 2009 at 05:47:43AM +0100, Laszlo Valko wrote:
> On Fri, Nov 20, 2009 at 02:49:51PM -0800, David Miller wrote:
> > From: Laszlo Valko <valko@linux.karinthy.hu>
> > Date: Fri, 20 Nov 2009 21:02:49 +0100
> > 
> > > I'd appreciate any help to track down the problem.
> > 
> > It's a well known issue we've been trying to track down for some time
> > now.  We still have no real idea what the exact problem is.
> > 
> > Somone has a remote console setup for me to diagnose this remotely
> > since none of my own systems trigger this behavior.
> 
> Does it help if I try to narrow this down both the kernel version introducing
> this, and the minimum set of config options with which I can still
> reproduce it?

Just to let you know, thats what I found on my SunFire880/480:

Date: Fri, 6 Feb 2009 11:28:25 +0100

> I bisected meanwhile the complete versions from 2.6.26 to 2.6.27 series:
> 
> <2.6.26.8	boots
>  2.6.27-rc1	compile fails (see below)
> >2.6.27-rc2	hangs at boot

Will try your config with a 2.6.28 kernel next week. Could you please provide
your working 2.6.28 vmlinux binary on the web/ftp so that I can try this
on my machines ?

Thanks,
  Hermann

-- 
Netzwerkadministration/Zentrale Dienste, Interdiziplinaeres 
Zentrum fuer wissenschaftliches Rechnen der Universitaet Heidelberg
IWR; INF 368; 69120 Heidelberg; Tel: (06221)54-8236 Fax: -5224
Email: Hermann.Lauer@iwr.uni-heidelberg.de

Re: 2.6.31.6 freezes on v210

[Laszlo Valko]

On Sat, Nov 21, 2009 at 09:40:55PM +0100, Hermann Lauer wrote:
> Just to let you know, thats what I found on my SunFire880/480:
> 
> Date: Fri, 6 Feb 2009 11:28:25 +0100
> 
> > I bisected meanwhile the complete versions from 2.6.26 to 2.6.27 series:
> > 
> > <2.6.26.8	boots
> >  2.6.27-rc1	compile fails (see below)
> > >2.6.27-rc2	hangs at boot
> 

What I have found so far with 2.6.31.6:

I have read the threads in the mail archives about your & Sebastien's
problems, and it looks pretty much the same to me (with log timing printout
switched off, the last characters I see is 'Test').

CONFIG_PROM_CONSOLE has already been ripped from the kernel so I don't
have to switch that off.

If I leave CONFIG_SMP in, then the problem is there. I stripped off almost
everything (all block devices, all character devices, all filesystems, all
networking, even PCI support), and I still get the freeze. Even if I
specify nosmp to the kernel.
However, if I switch off CONFIG_SMP, then the problem goes away. I
cross-checked this also with my gentoo hardened 2.6.31, will all my nifty
features turn on, but SMP off, and voila, everything works - well, at
least on one CPU.

Now I'm going to see which kernel update introduced the problem.

> Will try your config with a 2.6.28 kernel next week. Could you please provide
> your working 2.6.28 vmlinux binary on the web/ftp so that I can try this
> on my machines ?

Here's the 2.6.28 kernel that worked for me:
http://info.mediastorm.hu/kernel-2.6.28-hardened-r9

Regards,
Laszlo


> 
> Thanks,
>   Hermann
> 
> -- 
> Netzwerkadministration/Zentrale Dienste, Interdiziplinaeres 
> Zentrum fuer wissenschaftliches Rechnen der Universitaet Heidelberg
> IWR; INF 368; 69120 Heidelberg; Tel: (06221)54-8236 Fax: -5224
> Email: Hermann.Lauer@iwr.uni-heidelberg.de

Re: 2.6.31.6 freezes on v210

[Laszlo Valko]

On Sun, Nov 22, 2009 at 12:26:05AM +0100, Laszlo Valko wrote:
> Now I'm going to see which kernel update introduced the problem.

Guys, here's the first change that makes my v240 unbootable:

commit e5553a6d04421eec326a629571d696e8e745a0e4
Author: David S. Miller <davem@davemloft.net>
Date:   Thu Jan 29 21:22:47 2009 -0800

    sparc64: Implement NMI watchdog on capable cpus.
    
    Signed-off-by: David S. Miller <davem@davemloft.net>

I tried to patch -R this onto 2.6.31.6 for a cross-check, but some of the
changes have already been undone, so I guess it's not trivial to do this.

Dave, how to go on now?

Regards,
Laszlo

Re: 2.6.31.6 freezes on v210

[Josip Rodin]

On Mon, Nov 23, 2009 at 03:00:50PM +0100, Laszlo Valko wrote:
> On Sun, Nov 22, 2009 at 12:26:05AM +0100, Laszlo Valko wrote:
> > Now I'm going to see which kernel update introduced the problem.
> 
> Guys, here's the first change that makes my v240 unbootable:
> 
> commit e5553a6d04421eec326a629571d696e8e745a0e4
> Author: David S. Miller <davem@davemloft.net>
> Date:   Thu Jan 29 21:22:47 2009 -0800
> 
>     sparc64: Implement NMI watchdog on capable cpus.
>     
>     Signed-off-by: David S. Miller <davem@davemloft.net>
> 
> I tried to patch -R this onto 2.6.31.6 for a cross-check, but some of the
> changes have already been undone, so I guess it's not trivial to do this.

Try just editing arch/sparc/kernel/pcr.c and in the pcr_arch_init()
function make it not call return nmi_init() but just return 0.

-- 
     2. That which causes joy or happiness.

Re: 2.6.31.6 freezes on v210

[Hermann Lauer]

On Sun, Nov 22, 2009 at 12:26:05AM +0100, Laszlo Valko wrote:
> > Will try your config with a 2.6.28 kernel next week. Could you please provide
> > your working 2.6.28 vmlinux binary on the web/ftp so that I can try this
> > on my machines ?
> 
> Here's the 2.6.28 kernel that worked for me:
> http://info.mediastorm.hu/kernel-2.6.28-hardened-r9

ends very soon with:

Rebooting with command: boot gem:dhcp
Boot device: /pci@8,600000/network@2:dhcp  File and args: 
Timed out waiting for BOOTP/DHCP reply
Timed out waiting for BOOTP/DHCP reply
Timed out waiting for BOOTP/DHCP reply
ERROR: Last Trap: Fast Data Access MMU Miss

{2} ok 

So for the SunFire 880/480 still no kernel >=2.6.27 found booting.
At least made netbooting working again, hope this helps davem.

Thanks anyway,
 Hermann

-- 
Netzwerkadministration/Zentrale Dienste, Interdiziplinaeres 
Zentrum fuer wissenschaftliches Rechnen der Universitaet Heidelberg
IWR; INF 368; 69120 Heidelberg; Tel: (06221)54-8236 Fax: -5224
Email: Hermann.Lauer@iwr.uni-heidelberg.de

Re: 2.6.31.6 freezes on v210

[Laszlo Valko]

On Mon, Nov 23, 2009 at 04:57:44PM +0100, Hermann Lauer wrote:
> On Sun, Nov 22, 2009 at 12:26:05AM +0100, Laszlo Valko wrote:
> > > Will try your config with a 2.6.28 kernel next week. Could you please provide
> > > your working 2.6.28 vmlinux binary on the web/ftp so that I can try this
> > > on my machines ?
> > 
> > Here's the 2.6.28 kernel that worked for me:
> > http://info.mediastorm.hu/kernel-2.6.28-hardened-r9
> 
> ends very soon with:
> 
> Rebooting with command: boot gem:dhcp
> Boot device: /pci@8,600000/network@2:dhcp  File and args: 
> Timed out waiting for BOOTP/DHCP reply
> Timed out waiting for BOOTP/DHCP reply
> Timed out waiting for BOOTP/DHCP reply
> ERROR: Last Trap: Fast Data Access MMU Miss
> 
> {2} ok 

Is this supposed to boot from net? /usr/src/linux/arch/sparc/boot/image
is a kernel image that can be booted from network?

I boot it with silo.

Regards,
Laszlo

> 
> So for the SunFire 880/480 still no kernel >=2.6.27 found booting.
> At least made netbooting working again, hope this helps davem.
> 
> Thanks anyway,
>  Hermann
> 
> -- 
> Netzwerkadministration/Zentrale Dienste, Interdiziplinaeres 
> Zentrum fuer wissenschaftliches Rechnen der Universitaet Heidelberg
> IWR; INF 368; 69120 Heidelberg; Tel: (06221)54-8236 Fax: -5224
> Email: Hermann.Lauer@iwr.uni-heidelberg.de

Re: 2.6.31.6 freezes on v210

[Laszlo Valko]

On Mon, Nov 23, 2009 at 03:23:28PM +0100, Josip Rodin wrote:
> Try just editing arch/sparc/kernel/pcr.c and in the pcr_arch_init()
> function make it not call return nmi_init() but just return 0.

Well, that's it.

This simple changed cured my 2.6.31.6 & my gentoo-hardened 2.6.31 kernel,
with SMP.

Regards,
Laszlo

Re: 2.6.31.6 freezes on v210

[David Miller]

From: Laszlo Valko <valko@linux.karinthy.hu>
Date: Mon, 23 Nov 2009 21:52:08 +0100

> On Mon, Nov 23, 2009 at 03:23:28PM +0100, Josip Rodin wrote:
>> Try just editing arch/sparc/kernel/pcr.c and in the pcr_arch_init()
>> function make it not call return nmi_init() but just return 0.
> 
> Well, that's it.
> 
> This simple changed cured my 2.6.31.6 & my gentoo-hardened 2.6.31 kernel,
> with SMP.

It's almost certainly the same problem we're trying to track down
with Josip.