* Error ' I2C transfer at 0x48 failed' on 2.6.33
@ 2010-02-26 21:49 Andrey Gusev
2010-02-27 9:04 ` Jean Delvare
0 siblings, 1 reply; 4+ messages in thread
From: Andrey Gusev @ 2010-02-26 21:49 UTC (permalink / raw)
To: linux-i2c-u79uwXL29TY76Z2rM5mHXA
Hello all!
Thera are errors in dmeg on 2.6.33:
[ 6.259606] PowerMac i2c bus pmu 2 registered
[ 6.262123] PowerMac i2c bus pmu 1 registered
[ 6.264616] PowerMac i2c bus mac-io 0 registered
[ 6.267041] i2c i2c-6: I2C transfer at 0x48 failed, size 0, err -6
[ 6.269629] i2c i2c-6: I2C transfer at 0x49 failed, size 0, err -6
[ 6.272097] i2c i2c-6: I2C transfer at 0x4a failed, size 0, err -6
[ 6.274583] i2c i2c-6: I2C transfer at 0x4b failed, size 0, err -6
[ 6.277010] i2c i2c-6: I2C transfer at 0x4c failed, size 0, err -6
[ 6.279436] i2c i2c-6: I2C transfer at 0x4d failed, size 0, err -6
[ 6.281837] i2c i2c-6: I2C transfer at 0x4e failed, size 0, err -6
[ 6.284006] i2c i2c-6: I2C transfer at 0x4f failed, size 0, err -6
[ 6.286140] i2c i2c-6: I2C transfer at 0x2c failed, size 0, err -6
[ 6.288253] i2c i2c-6: I2C transfer at 0x2d failed, size 0, err -6
[ 6.290353] i2c i2c-6: I2C transfer at 0x2e failed, size 0, err -6
[ 6.292661] i2c i2c-6: I2C transfer at 0x2f failed, size 0, err -6
[ 6.294971] PowerMac i2c bus uni-n 1 registered
[ 6.297484] i2c i2c-7: I2C transfer at 0x48 failed, size 0, err -6
[ 6.300765] DS1775 digital thermometer [@49]
[ 6.302772] Temp: 27.0 C Hyst: 75.0 C OS: 80.0 C
[ 6.305581] ADM1030 fan controller [@2c]
[ 6.307896] PowerMac i2c bus uni-n 0 registered
Same log on 2.6.32.8:
[ 6.252901] PowerMac i2c bus pmu 2 registered
[ 6.255852] PowerMac i2c bus pmu 1 registered
[ 6.258573] PowerMac i2c bus mac-io 0 registered
[ 6.262216] PowerMac i2c bus uni-n 1 registered
[ 6.266255] DS1775 digital thermometer [@49]
[ 6.268665] Temp: 26.5 C Hyst: 75.0 C OS: 80.0 C
[ 6.271728] ADM1030 fan controller [@2c]
[ 6.274272] PowerMac i2c bus uni-n 0 registered
There is full dmesg:
[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 1536MB; using 4096kB for hash table (at cfc00000)
[ 0.000000] Linux version 2.6.33 (andrey@power-debian) (gcc version 4.4.3 20100108 (prerelease) (Debian 4.4.2-9) ) #8 SMP PREEMPT Thu Feb 25 23:30:24 MSK 2010
[ 0.000000] Found initrd at 0xc1b00000:0xc2106c00
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x24
[ 0.000000] Mapped at 0xff7c0000
[ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at 0xff740000
[ 0.000000] PowerMac motherboard: PowerMac G4 Windtunnel
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f4000000 ranges:
[ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=1392, gen1=1391
[ 0.000000] nvram: Active bank is: 0
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x60000000, Total RAM: 0x60000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00030000
[ 0.000000] Normal 0x00030000 -> 0x00030000
[ 0.000000] HighMem 0x00030000 -> 0x00060000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00060000
[ 0.000000] On node 0 totalpages: 393216
[ 0.000000] free_area_init_node: node 0, pgdat c05121e0, node_mem_map c05a5000
[ 0.000000] DMA zone: 1536 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 195072 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1536 pages used for memmap
[ 0.000000] HighMem zone: 195072 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c11b0000 s15848 r8192 d12824 u65536
[ 0.000000] pcpu-alloc: s15848 r8192 d12824 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390144
[ 0.000000] Kernel command line: root=/dev/mapper/power--group-root ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] High memory: 786432k
[ 0.000000] Memory: 1542140k/1572864k available (5052k kernel code, 29612k reserved, 216k data, 458k bss, 256k init)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffc1000..0xfffff000 : fixmap
[ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs
[ 0.000000] * 0xfdcda000..0xff800000 : early ioremap
[ 0.000000] * 0xf1000000..0xfdcda000 : vmalloc & ioremap
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:128
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] irq: irq 55 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 55
[ 0.000000] GMT Delta read from XPRAM: 240 minutes, DST: on
[ 0.000000] time_init: decrementer frequency = 33.304558 MHz
[ 0.000000] time_init: processor frequency = 866.666664 MHz
[ 0.000000] clocksource: timebase mult[781a8ad] shift[22] registered
[ 0.000000] clockevent: decrementer mult[886a5c3] shift[32] cpu[0]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000000] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22
[ 0.000000] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23
[ 0.001335] Mount-cache hash table entries: 512
[ 0.001914] device-tree: Duplicate name in /cpus/PowerPC,G4@0/l2-cache, renamed to "l2-cache#1"
[ 0.002025] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.002173] device-tree: Duplicate name in /cpus/PowerPC,G4@1/l2-cache, renamed to "l2-cache#1"
[ 0.002279] device-tree: Duplicate name in /cpus/PowerPC,G4@1, renamed to "l2-cache#1"
[ 0.006530] PowerMac SMP probe found 2 cpus
[ 0.006628] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42
[ 0.006658] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.006681] channel 0 bus <multibus>
[ 0.006694] channel 1 bus <multibus>
[ 0.006722] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26
[ 0.006738] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.006759] channel 0 bus <multibus>
[ 0.006778] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.006796] channel 1 bus <multibus>
[ 0.006809] channel 2 bus <multibus>
[ 0.006834] pmf: no parser for command 17 !
[ 0.006897] Processor timebase sync using GPIO 0x73
[ 0.006913] mpic: requesting IPIs ...
[ 0.006930] irq: irq 251 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 123
[ 0.006944] irq: irq 252 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 124
[ 0.006957] irq: irq 253 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 125
[ 0.006969] irq: irq 254 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 126
[ 0.006979] CPU0: L2CR is 80080000
[ 0.006991] CPU0: L3CR is 8f0b0000
[478142820.421235] CPU1: L2CR was 80000
[478142820.421277] CPU1: L2CR set to 80080000
[478142820.421283] CPU1: L3CR was 0
[478142820.421443] CPU1: L3CR set to 8f0b0000
[ 0.014100] Processor 1 found.
[ 0.014178] clockevent: decrementer mult[886a5c3] shift[32] cpu[1]
[ 0.014236] Brought up 2 CPUs
[ 0.016624] NET: Registered protocol family 16
[ 0.018729] MPC7450 family performance monitor hardware support registered
[ 0.018793] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25
[ 0.018849] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47
[ 0.019426] PCI: Probing PCI hardware
[ 0.019785] pci 0000:00:10.0: reg 10: [mem 0x91000000-0x91ffffff]
[ 0.019798] pci 0000:00:10.0: reg 14: [mem 0x98000000-0x9fffffff pref]
[ 0.019810] pci 0000:00:10.0: reg 18: [mem 0x00000000-0x0007ffff pref]
[ 0.019833] pci 0000:00:10.0: reg 30: [mem 0x90000000-0x9001ffff pref]
[ 0.019935] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48
[ 0.020612] pci 0001:10:15.0: reg 10: [mem 0x800c0000-0x800fffff]
[ 0.020625] pci 0001:10:15.0: reg 14: [io 0x0410-0x0417]
[ 0.020637] pci 0001:10:15.0: reg 18: [io 0x0400-0x0407]
[ 0.020680] pci 0001:10:15.0: supports D2
[ 0.020712] pci 0001:10:17.0: reg 10: [mem 0x80000000-0x8007ffff]
[ 0.020775] pci 0001:10:18.0: reg 10: [mem 0x80081000-0x80081fff]
[ 0.020839] pci 0001:10:19.0: reg 10: [mem 0x80080000-0x80080fff]
[ 0.020938] irq: irq 58 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 58
[ 0.020984] irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27
[ 0.021026] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28
[ 0.022293] pci 0002:20:0d.0: reg 10: [mem 0xf5004000-0xf5007fff]
[ 0.022358] pci 0002:20:0e.0: reg 10: [mem 0xf5000000-0xf5000fff]
[ 0.022405] pci 0002:20:0e.0: supports D1 D2
[ 0.022412] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.022421] pci 0002:20:0e.0: PME# disabled
[ 0.022450] pci 0002:20:0f.0: reg 10: [mem 0xf5200000-0xf53fffff]
[ 0.022480] pci 0002:20:0f.0: reg 30: [mem 0xf5100000-0xf51fffff pref]
[ 0.022560] irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39
[ 0.022593] irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40
[ 0.022629] irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41
[ 0.023485] PCI 0001:10 Cannot reserve Legacy IO [io 0x0000-0x0fff]
[ 0.023506] pci 0000:00:10.0: BAR 2: assigned [mem 0xf1000000-0xf107ffff pref]
[ 0.023551] pci 0000:00:10.0: BAR 2: set to [mem 0xf1000000-0xf107ffff pref] (PCI address [0xf1000000-0xf107ffff]
[ 0.023590] pci_bus 0000:00: resource 0 [io 0x802000-0x1001fff]
[ 0.023598] pci_bus 0000:00: resource 1 [mem 0xf1000000-0xf1ffffff]
[ 0.023606] pci_bus 0000:00: resource 2 [mem 0x90000000-0xafffffff]
[ 0.023614] pci_bus 0001:10: resource 0 [io 0x0000-0x7fffff]
[ 0.023622] pci_bus 0001:10: resource 1 [mem 0xf3000000-0xf3ffffff]
[ 0.023629] pci_bus 0001:10: resource 2 [mem 0x80000000-0x8fffffff]
[ 0.023638] pci_bus 0002:20: resource 0 [io 0xff7fe000-0xffffdfff]
[ 0.023645] pci_bus 0002:20: resource 1 [mem 0xf5000000-0xf5ffffff]
[ 0.032304] bio: create slab <bio-0> at 0
[ 0.033969] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none
[ 0.034035] vgaarb: loaded
[ 0.034680] usbcore: registered new interface driver usbfs
[ 0.034864] usbcore: registered new interface driver hub
[ 0.035104] usbcore: registered new device driver usb
[ 0.035592] Advanced Linux Sound Architecture Driver Version 1.0.21.
[ 0.036171] Switching to clocksource timebase
[ 0.043194] NET: Registered protocol family 2
[ 0.043404] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.044358] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.046702] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.048440] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.048479] TCP reno registered
[ 0.048506] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.048562] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.048923] NET: Registered protocol family 1
[ 0.049057] PCI: CLS mismatch (32 != 1020), using 32 bytes
[ 0.049279] Trying to unpack rootfs image as initramfs...
[ 0.369486] Freeing initrd memory: 6171k freed
[ 0.370710] Thermal assist unit not available
[ 0.373340] highmem bounce pool size: 64 pages
[ 0.385214] msgmni has been set to 1490
[ 0.388218] alg: No test for stdrng (krng)
[ 0.411794] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 0.411877] io scheduler noop registered
[ 0.412180] io scheduler cfq registered (default)
[ 0.413008] nvidiafb: Device ID: 10de0172
[ 0.417678] nvidiafb: CRTC0 analog not found
[ 0.421676] nvidiafb: CRTC1 analog not found
[ 0.498461] i2c i2c-0: unable to read EDID block.
[ 0.618461] i2c i2c-0: unable to read EDID block.
[ 0.738463] i2c i2c-0: unable to read EDID block.
[ 0.996692] nvidiafb: EDID found from BUS2
[ 0.996741] nvidiafb: CRTC 1 is currently programmed for DFP
[ 0.996763] nvidiafb: Using DFP on CRTC 1
[ 0.996780] nvidiafb: Panel size is 1600 x 1200
[ 0.996799] nvidiafb: Panel is LVDS
[ 0.998421] nvidiafb: Flat panel dithering disabled
[ 1.003723] Console: switching to colour frame buffer device 200x75
[ 1.008910] nvidiafb: PCI nVidia NV17 framebuffer (32MB @ 0x98000000)
[ 1.021532] Generic non-volatile memory driver v1.1
[ 1.021785] Linux agpgart interface v0.103
[ 1.021863] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
[ 1.023371] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
[ 1.023625] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
[ 1.023914] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.025358] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh-XVmvHMARGASRxgTJ+F1o3A@public.gmane.orgshing.org>)
[ 1.025441] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
[ 1.025707] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
[ 1.032836] brd: module loaded
[ 1.036427] loop: module loaded
[ 1.036539] MacIO PCI driver attached to Keylargo chipset
[ 1.037660] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32
[ 1.038303] irq: irq 19 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19
[ 1.038324] irq: irq 11 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16
[ 1.038607] irq: irq 20 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20
[ 1.038627] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17
[ 1.038873] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18
[ 1.038893] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21
[ 1.039179] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24
[ 1.039199] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29
[ 1.040422] Uniform Multi-Platform E-IDE driver
[ 1.041027] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
[ 2.052701] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
[ 2.052790] Probing IDE interface ide0...
[ 2.316888] hda: IBM-IC35L060AVVA07-0, ATA DISK drive
[ 2.928911] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.929085] hda: UDMA/100 mode selected
[ 2.929326] ide0 at 0xf210a000-0xf210a070,0xf210a160 on irq 39
[ 3.941726] ide-pmac: Found Apple KeyLargo ATA-4 controller (macio), bus ID 2, irq 19
[ 3.941809] Probing IDE interface ide1...
[ 4.460947] ide1 at 0xf10fc000-0xf10fc070,0xf10fc160 on irq 19
[ 5.472746] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 20
[ 5.472822] Probing IDE interface ide2...
[ 5.991968] ide2 at 0xf2102000-0xf2102070,0xf2102160 on irq 20
[ 5.992192] ide-gd driver 1.18
[ 5.992285] hda: max request size: 128KiB
[ 6.005942] hda: 120103200 sectors (61492 MB) w/1863KiB Cache, CHS=65535/16/63
[ 6.006207] hda: cache flushes supported
[ 6.006402] hda: [mac] hda1 hda2 hda3 hda4
[ 6.017474] sungem.c:v0.98 8/24/03 David S. Miller (davem-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org)
[ 6.080150] PHY ID: 2060e1, addr: 0
[ 6.081446] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:ab:d1:a6
[ 6.081509] eth0: Found BCM5421 PHY
[ 6.082108] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.082370] ohci_hcd 0001:10:18.0: enabling device (0000 -> 0002)
[ 6.082443] ohci_hcd 0001:10:18.0: OHCI Host Controller
[ 6.082783] ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1
[ 6.082898] ohci_hcd 0001:10:18.0: irq 27, io mem 0x80081000
[ 6.153669] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.153728] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.153795] usb usb1: Product: OHCI Host Controller
[ 6.153837] usb usb1: Manufacturer: Linux 2.6.33 ohci_hcd
[ 6.153881] usb usb1: SerialNumber: 0001:10:18.0
[ 6.154388] hub 1-0:1.0: USB hub found
[ 6.154446] hub 1-0:1.0: 2 ports detected
[ 6.154630] ohci_hcd 0001:10:19.0: enabling device (0000 -> 0002)
[ 6.156831] ohci_hcd 0001:10:19.0: OHCI Host Controller
[ 6.159203] ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2
[ 6.161380] ohci_hcd 0001:10:19.0: irq 28, io mem 0x80080000
[ 6.233648] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.235760] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.237855] usb usb2: Product: OHCI Host Controller
[ 6.239939] usb usb2: Manufacturer: Linux 2.6.33 ohci_hcd
[ 6.242020] usb usb2: SerialNumber: 0001:10:19.0
[ 6.244567] hub 2-0:1.0: USB hub found
[ 6.246675] hub 2-0:1.0: 2 ports detected
[ 6.249034] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.251554] mice: PS/2 mouse device common for all mice
[ 6.253924] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 6.256246] i2c /dev entries driver
[ 6.259606] PowerMac i2c bus pmu 2 registered
[ 6.262123] PowerMac i2c bus pmu 1 registered
[ 6.264616] PowerMac i2c bus mac-io 0 registered
[ 6.267041] i2c i2c-6: I2C transfer at 0x48 failed, size 0, err -6
[ 6.269629] i2c i2c-6: I2C transfer at 0x49 failed, size 0, err -6
[ 6.272097] i2c i2c-6: I2C transfer at 0x4a failed, size 0, err -6
[ 6.274583] i2c i2c-6: I2C transfer at 0x4b failed, size 0, err -6
[ 6.277010] i2c i2c-6: I2C transfer at 0x4c failed, size 0, err -6
[ 6.279436] i2c i2c-6: I2C transfer at 0x4d failed, size 0, err -6
[ 6.281837] i2c i2c-6: I2C transfer at 0x4e failed, size 0, err -6
[ 6.284006] i2c i2c-6: I2C transfer at 0x4f failed, size 0, err -6
[ 6.286140] i2c i2c-6: I2C transfer at 0x2c failed, size 0, err -6
[ 6.288253] i2c i2c-6: I2C transfer at 0x2d failed, size 0, err -6
[ 6.290353] i2c i2c-6: I2C transfer at 0x2e failed, size 0, err -6
[ 6.292661] i2c i2c-6: I2C transfer at 0x2f failed, size 0, err -6
[ 6.294971] PowerMac i2c bus uni-n 1 registered
[ 6.297484] i2c i2c-7: I2C transfer at 0x48 failed, size 0, err -6
[ 6.300765] DS1775 digital thermometer [@49]
[ 6.302772] Temp: 27.0 C Hyst: 75.0 C OS: 80.0 C
[ 6.305581] ADM1030 fan controller [@2c]
[ 6.307896] PowerMac i2c bus uni-n 0 registered
[ 6.310514] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
[ 6.313537] Reducing overheating limit to 75.0 C (Hyst: 70.0 C)
[ 6.319704] usbcore: registered new interface driver hiddev
[ 6.322145] usbcore: registered new interface driver usbhid
[ 6.324156] usbhid: USB HID core driver
[ 6.326130] ALSA device list:
[ 6.328079] No soundcards found.
[ 6.331110] TCP cubic registered
[ 6.333058] NET: Registered protocol family 17
[ 6.335615] registered taskstats version 1
[ 6.338121] input: PMU as /devices/virtual/input/input0
[ 6.340494] rtc-generic rtc-generic: setting system clock to 2010-02-26 18:36:50 UTC (1267209410)
[ 6.342453] Freeing unused kernel memory: 256k init
[ 6.468525] usb 1-1: new low speed USB device using ohci_hcd and address 2
[ 6.611817] usb 1-1: New USB device found, idVendor=0458, idProduct=002e
[ 6.613917] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.615903] usb 1-1: Product: NetScroll+ Traveler
[ 6.618143] usb 1-1: Manufacturer: KYE
[ 6.632922] input: KYE NetScroll+ Traveler as /devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1:1.0/input/input1
[ 6.635562] generic-usb 0003:0458:002E.0001: input,hidraw0: USB HID v1.10 Mouse [KYE NetScroll+ Traveler] on usb-0001:10:18.0-1/input0
[ 6.750868] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 6.888872] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608
[ 6.891102] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6.893150] usb 2-1: Product: USB2.0 Hub
[ 6.916194] hub 2-1:1.0: USB hub found
[ 6.919564] hub 2-1:1.0: 4 ports detected
[ 6.952135] firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002)
[ 7.010527] firewire_ohci: Added fw-ohci device 0002:20:0e.0, OHCI version 1.10
[ 7.067274] au8830 0001:10:15.0: enabling device (0004 -> 0007)
[ 7.069535] Vortex: init....
[ 7.218819] usb 2-1.1: new full speed USB device using ohci_hcd and address 3
[ 7.313805] usb 2-1.1: New USB device found, idVendor=05e3, idProduct=0608
[ 7.316143] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 7.318249] usb 2-1.1: Product: USB2.0 Hub
[ 7.322164] hub 2-1.1:1.0: USB hub found
[ 7.326545] hub 2-1.1:1.0: 4 ports detected
[ 7.397963] done.
[ 7.408782] usb 2-1.2: new low speed USB device using ohci_hcd and address 4
[ 7.511060] firewire_core: created device fw0: GUID 000393fffeabd1a6, S400
[ 7.517828] usb 2-1.2: New USB device found, idVendor=04d9, idProduct=0022
[ 7.520165] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7.522427] usb 2-1.2: Product: USB Keyboard
[ 7.538196] input: USB Keyboard as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input2
[ 7.541056] generic-usb 0003:04D9:0022.0002: input,hidraw1: USB HID v1.10 Keyboard [USB Keyboard] on usb-0001:10:19.0-1.2/input0
[ 7.568949] input: USB Keyboard as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input3
[ 7.571682] generic-usb 0003:04D9:0022.0003: input,hidraw2: USB HID v1.10 Device [USB Keyboard] on usb-0001:10:19.0-1.2/input1
[ 7.645799] usb 2-1.1.4: new low speed USB device using ohci_hcd and address 5
[ 7.745813] usb 2-1.1.4: New USB device found, idVendor=0766, idProduct=0204
[ 7.748361] usb 2-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.750866] usb 2-1.1.4: Product: USB IR Combo Device
[ 7.753489] usb 2-1.1.4: Manufacturer: TopSeed Tech Corp.
[ 7.770234] input: TopSeed Tech Corp. USB IR Combo Device as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.1/2-1.1.4/2-1.1.4:1.0/input/input4
[ 7.773340] topseed 0003:0766:0204.0004: input,hidraw3: USB HID v1.00 Keyboard [TopSeed Tech Corp. USB IR Combo Device ] on usb-0001:10:19.0-1.1.4/input0
[ 7.790595] input: TopSeed Tech Corp. USB IR Combo Device as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.1/2-1.1.4/2-1.1.4:1.1/input/input5
[ 7.794365] topseed 0003:0766:0204.0005: input,hiddev0,hidraw4: USB HID v1.00 Mouse [TopSeed Tech Corp. USB IR Combo Device ] on usb-0001:10:19.0-1.1.4/input1
[ 8.481173] eth0: Link is up at 100 Mbps, full-duplex.
[ 14.318113] CPU-temp: 28.4 C, Case: 23.1 C, Fan: 0 (tuned -11)
[ 72.787245] kjournald starting. Commit interval 5 seconds
[ 72.787277] EXT3-fs (dm-1): mounted filesystem with writeback data mode
[ 75.397357] udev: starting version 151
[ 78.279801] EXT3-fs (dm-1): using internal journal
[ 78.757027] SCSI subsystem initialized
[ 78.895081] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30
[ 78.895147] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 31
[ 78.904795] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61
[ 78.904829] irq: irq 60 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 60
[ 79.357614] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input6
[ 81.315598] kjournald starting. Commit interval 5 seconds
[ 81.316041] EXT3-fs (dm-3): using internal journal
[ 81.316068] EXT3-fs (dm-3): mounted filesystem with writeback data mode
[ 81.349079] REISERFS (device dm-4): found reiserfs format "3.6" with standard journal
[ 81.354555] REISERFS (device dm-4): using ordered data mode
[ 81.371434] REISERFS (device dm-4): journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 81.379302] REISERFS (device dm-4): checking transaction log (dm-4)
[ 81.421064] REISERFS (device dm-4): Using r5 hash to sort names
[ 81.511192] Adding 1048568k swap on /dev/mapper/power--group-swap_1. Priority:-1 extents:1 across:1048568k
[ 84.616253] fuse init (API version 7.13)
[ 85.790696] eth0: Link is up at 100 Mbps, full-duplex.
[ 85.790901] eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
More information about kernel:
andrey@power-debian:~/tmp$ cat /proc/version
Linux version 2.6.33 (andrey@power-debian) (gcc version 4.4.3 20100108
(prerelease) (Debian 4.4.2-9) ) #8 SMP PREEMPT Thu Feb 25 23:30:24 MSK 2010
.config file:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33
# Thu Feb 25 22:52:26 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
CONFIG_6xx=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_PPC_PERF_CTRS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_NR_IRQS=128
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_LOCKBREAK=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_EVENT_PROFILE=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_CHRP=y
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
CONFIG_PPC_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
CONFIG_PPC_RTAS_DAEMON=y
CONFIG_RTAS_PROC=y
# CONFIG_MMIO_NVRAM is not set
CONFIG_PPC_MPC106=y
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_PPC601_SYNC_FIX is not set
CONFIG_TAU=y
# CONFIG_TAU_INT is not set
# CONFIG_TAU_AVERAGE is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
CONFIG_HIGHMEM=y
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
# CONFIG_PM is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
# CONFIG_ISA is not set
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
# CONFIG_IRLAN is not set
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
# CONFIG_DONGLE is not set
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
# CONFIG_SIGMATEL_FIR is not set
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
# CONFIG_TOSHIBA_FIR is not set
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
# CONFIG_VLSI_FIR is not set
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_MAC_FLOPPY is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MULTICORE_RAID456=y
CONFIG_MD_RAID6_PQ=m
CONFIG_ASYNC_RAID6_TEST=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# The newer stack is recommended.
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
# CONFIG_FIREWIRE_NET is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_ADB is not set
# CONFIG_ADB_CUDA is not set
CONFIG_ADB_PMU=y
# CONFIG_ADB_PMU_LED is not set
# CONFIG_PMAC_MEDIABAY is not set
# CONFIG_PMAC_BACKLIGHT is not set
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_THERM_WINDTUNNEL=y
# CONFIG_THERM_ADT746X is not set
CONFIG_WINDFARM=m
# CONFIG_PMAC_RACKMETER is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_MACE is not set
# CONFIG_BMAC is not set
# CONFIG_HAPPYMEAL is not set
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=m
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_PMACZILOG=y
# CONFIG_SERIAL_PMACZILOG_TTYS is not set
CONFIG_SERIAL_PMACZILOG_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_BRIQ_PANEL is not set
# CONFIG_HVC_RTAS is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# Mac SMBus host controller drivers
#
# CONFIG_I2C_HYDRA is not set
CONFIG_I2C_POWERMAC=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_UNINORTH=y
CONFIG_VGA_ARB=y
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
CONFIG_FB_CONTROL=y
CONFIG_FB_PLATINUM=y
CONFIG_FB_VALKYRIE=y
# CONFIG_FB_CT65550 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_PPC=y
CONFIG_SND_POWERMAC=m
# CONFIG_SND_POWERMAC_AUTO_DRC is not set
CONFIG_SND_AOA=m
CONFIG_SND_AOA_FABRIC_LAYOUT=m
CONFIG_SND_AOA_ONYX=m
CONFIG_SND_AOA_TAS=m
# CONFIG_SND_AOA_TOONIE is not set
CONFIG_SND_AOA_SOUNDBUS=m
CONFIG_SND_AOA_SOUNDBUS_I2S=m
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_GENERIC=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_SMX is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=866
CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_EXPORTFS=m
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=m
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_XMON=y
# CONFIG_XMON_DEFAULT is not set
CONFIG_XMON_DISASSEMBLY=y
CONFIG_DEBUGGER=y
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
Information about environment:
andrey@power-debian:~/build/kernel/linux-2.6.33/scripts$ ./ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux power-debian 2.6.33 #8 SMP PREEMPT Thu Feb 25 23:30:24 MSK 2010 ppc GNU/Linux
Gnu C 4.4.3
Gnu make 3.81
binutils 2.20
util-linux ./ver_linux: 23: fdformat: not found
mount support
module-init-tools found
Linux C Library 2.10.2
Dynamic linker (ldd) 2.10.2
Procps 3.2.8
Console-tools 0.2.3
Sh-utils 7.4
Modules Loaded nls_utf8 nls_cp866 vfat fat sd_mod usb_storage
fuse snd_powermac firewire_sbp2 scsi_mod sha256_generic snd_au8830
snd_ac97_codec snd_pcm snd_page_alloc ac97_bus snd_mpu401_uart
snd_seq_midi snd_seq_midi_event snd_seq snd_timer firewire_ohci
snd_rawmidi firewire_core crc_itu_t snd_seq_device
andrey@power-debian:~/build/kernel/linux-2.6.33/scripts$ dpkg-query -s util-linux
Version: 2.16.2-0
More about my system:
andrey@power-debian:~/build/kernel/linux-2.6.33/scripts$ cat /proc/cpuinfo
processor : 0
cpu : 7455, altivec supported
clock : 866.666664MHz
revision : 2.1 (pvr 8001 0201)
bogomips : 66.60
processor : 1
cpu : 7455, altivec supported
clock : 866.666664MHz
revision : 2.1 (pvr 8001 0201)
bogomips : 66.60
total bogomips : 133.21
timebase : 33304558
platform : PowerMac
model : PowerMac3,6
machine : PowerMac3,6
motherboard : PowerMac3,6 MacRISC2 MacRISC Power Macintosh
detected as : 129 (PowerMac G4 Windtunnel)
pmac flags : 00000010
L2 cache : 256K unified
pmac-generation : NewWorld
Memory : 1536 MB
andrey@power-debian:~/build/kernel/linux-2.6.33/scripts$ cat /proc/modules
nls_utf8 1100 0 - Live 0xf535d000
nls_cp866 4093 0 - Live 0xf5354000
vfat 10288 0 - Live 0xf5348000
fat 51132 1 vfat, Live 0xf532d000
sd_mod 25714 0 - Live 0xf530a000
usb_storage 37847 0 - Live 0xf52f0000
fuse 63437 1 - Live 0xf50d7000
snd_powermac 52736 0 - Live 0xf4c49000
firewire_sbp2 14005 0 - Live 0xf4c28000
scsi_mod 86466 3 sd_mod,usb_storage,firewire_sbp2, Live 0xf4bf9000
sha256_generic 9369 2 - Live 0xf477e000
snd_au8830 47059 1 - Live 0xf4697000
snd_ac97_codec 95460 1 snd_au8830, Live 0xf4663000
snd_pcm 68816 3 snd_powermac,snd_au8830,snd_ac97_codec, Live 0xf4620000
snd_page_alloc 5997 1 snd_pcm, Live 0xf43fa000
ac97_bus 673 1 snd_ac97_codec, Live 0xf43ee000
snd_mpu401_uart 6847 1 snd_au8830, Live 0xf43e4000
snd_seq_midi 5472 0 - Live 0xf43d7000
snd_seq_midi_event 5216 1 snd_seq_midi, Live 0xf41f3000
snd_seq 57663 2 snd_seq_midi,snd_seq_midi_event, Live 0xf41d6000
snd_timer 20281 2 snd_pcm,snd_seq, Live 0xf41b3000
firewire_ohci 24664 0 - Live 0xf419b000
snd_rawmidi 20781 2 snd_mpu401_uart,snd_seq_midi, Live 0xf4182000
firewire_core 47752 2 firewire_sbp2,firewire_ohci, Live 0xf215d000
crc_itu_t 1091 1 firewire_core, Live 0xf2142000
snd_seq_device 5653 3 snd_seq_midi,snd_seq,snd_rawmidi, Live 0xf2138000
andrey@power-debian:~/build/kernel/linux-2.6.33/scripts$ cat /proc/ioports
00000000-007fffff : /pci@f2000000
00000400-00000407 : 0001:10:15.0
00000400-00000407 : au8830
00000410-00000417 : 0001:10:15.0
00000410-00000417 : au8830
00802000-01001fff : /pci@f0000000
00802000-00802fff : Legacy IO
ff7fe000-ffffdfff : /pci@f4000000
ff7fe000-ff7fefff : Legacy IO
andrey@power-debian:~/build/kernel/linux-2.6.33/scripts$ cat /proc/iomem
80000000-8fffffff : /pci@f2000000
80000000-8007ffff : 0001:10:17.0
80000000-8007ffff : 0.80000000:mac-io
80000050-8000007f : 0.00000050:gpio
80008000-800080ff : 0.00010000:i2s
80008000-800080ff : Sound Tx DMA
80008100-800081ff : 0.00010000:i2s
80008100-800081ff : Sound Rx DMA
80008200-800082ff : 0.00010000:i2s
80008300-800083ff : 0.00010000:i2s
80008a00-80008aff : 0.0001f000:ata-4
80008a00-80008aff : ide-pmac (dma)
80008b00-80008bff : 0.00020000:ata-3
80008b00-80008bff : ide-pmac (dma)
80010000-80010fff : 0.00010000:i2s
80010000-80010fff : Sound Control
80013000-80013000 : 0.00013000:ch-b
80013000-80013000 : pmac_zilog
80013010-80013010 : 0.00013000:ch-b
80013010-80013010 : pmac_zilog
80013020-80013020 : 0.00013020:ch-a
80013020-80013020 : pmac_zilog
80013030-80013030 : 0.00013020:ch-a
80013030-80013030 : pmac_zilog
80013040-80013040 : 0.00013000:ch-b
80013040-80013040 : pmac_zilog
80013050-80013050 : 0.00013020:ch-a
80013050-80013050 : pmac_zilog
80015000-80015fff : 0.00015000:timer
80016000-80017fff : 0.00016000:via-pmu
80018000-80018fff : 0.00018000:i2c
8001f000-8001ffff : 0.0001f000:ata-4
8001f000-8001ffff : ide-pmac (ports)
80020000-80020fff : 0.00020000:ata-3
80020000-80020fff : ide-pmac (ports)
80040000-8007ffff : 0.00040000:interrup
80080000-80080fff : 0001:10:19.0
80080000-80080fff : ohci_hcd
80081000-80081fff : 0001:10:18.0
80081000-80081fff : ohci_hcd
800c0000-800fffff : 0001:10:15.0
800c0000-800fffff : au8830
90000000-afffffff : /pci@f0000000
90000000-9001ffff : 0000:00:10.0
91000000-91ffffff : 0000:00:10.0
91000000-91ffffff : nvidiafb
98000000-9fffffff : 0000:00:10.0
98000000-9fffffff : nvidiafb
f1000000-f1ffffff : /pci@f0000000
f1000000-f107ffff : 0000:00:10.0
f1000000-f107ffff : nvidiafb
f3000000-f3ffffff : /pci@f2000000
f5000000-f5ffffff : /pci@f4000000
f5000000-f5000fff : 0002:20:0e.0
f5000000-f5000fff : firewire_ohci
f5004000-f5007fff : 0002:20:0d.0
f5004000-f5007fff : Kauai ATA
f5100000-f51fffff : 0002:20:0f.0
f5200000-f53fffff : 0002:20:0f.0
f5200000-f53fffff : sungem
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Capabilities: [80] AGP version 1.0
Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Kernel driver in use: agpgart-uninorth
0000:00:10.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 420] (rev a3) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device 0008
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 48
Region 0: Memory at 91000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 98000000 (32-bit, prefetchable) [size=128M]
Region 2: Memory at f1000000 (32-bit, prefetchable) [size=512K]
Expansion ROM at 90000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Kernel driver in use: nvidiafb
0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
0001:10:15.0 Multimedia audio controller: Aureal Semiconductor Vortex 2 (rev fe)
Subsystem: Diamond Multimedia Systems Monster Sound II
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (1000ns min, 3000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 58
Region 0: Memory at 800c0000 (32-bit, non-prefetchable) [size=256K]
Region 1: I/O ports at 0410 [size=8]
Region 2: I/O ports at 0400 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: au8830
0001:10:17.0 Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: macio
0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo USB (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 27
Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo USB (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 28
Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
0002:20:0d.0 Class ff00: Apple Computer Inc. UniNorth 2 ATA/100
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 39
Region 0: Memory at f5004000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: ide-pmac
0002:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 01) (prog-if 10 [OHCI])
Subsystem: Apple Computer Inc. iBook G4 2004
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: firewire_ohci
0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at f5100000 [disabled] [size=1M]
Kernel driver in use: gem
andrey@power-debian:/sys/bus/i2c/devices$ ls -l
итого 0
lrwxrwxrwx 1 root root 0 Фев 27 00:02 5-0035 -> ../../../devices/platform/i2c-powermac.2/i2c-5/5-0035
lrwxrwxrwx 1 root root 0 Фев 27 00:02 7-002c -> ../../../devices/platform/i2c-powermac.4/i2c-7/7-002c
lrwxrwxrwx 1 root root 0 Фев 27 00:02 7-0049 -> ../../../devices/platform/i2c-powermac.4/i2c-7/7-0049
lrwxrwxrwx 1 root root 0 Фев 27 00:02 i2c-0 -> ../../../devices/pci0000:00/0000:00:10.0/i2c-0
lrwxrwxrwx 1 root root 0 Фев 27 00:02 i2c-1 -> ../../../devices/pci0000:00/0000:00:10.0/i2c-1
lrwxrwxrwx 1 root root 0 Фев 27 00:02 i2c-2 -> ../../../devices/pci0000:00/0000:00:10.0/i2c-2
lrwxrwxrwx 1 root root 0 Фев 27 00:02 i2c-3 -> ../../../devices/platform/i2c-powermac.0/i2c-3
lrwxrwxrwx 1 root root 0 Фев 27 00:02 i2c-4 -> ../../../devices/platform/i2c-powermac.1/i2c-4
lrwxrwxrwx 1 root root 0 Фев 27 00:02 i2c-5 -> ../../../devices/platform/i2c-powermac.2/i2c-5
lrwxrwxrwx 1 root root 0 Фев 27 00:02 i2c-6 -> ../../../devices/platform/i2c-powermac.3/i2c-6
lrwxrwxrwx 1 root root 0 Фев 27 00:02 i2c-7 -> ../../../devices/platform/i2c-powermac.4/i2c-7
Hope my message is useful,
Andrey
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Error ' I2C transfer at 0x48 failed' on 2.6.33
2010-02-26 21:49 Error ' I2C transfer at 0x48 failed' on 2.6.33 Andrey Gusev
@ 2010-02-27 9:04 ` Jean Delvare
[not found] ` <20100227100420.1016e0c1-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
0 siblings, 1 reply; 4+ messages in thread
From: Jean Delvare @ 2010-02-27 9:04 UTC (permalink / raw)
To: Andrey Gusev; +Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA, Benjamin Herrenschmidt
Hi Andrey,
On Sat, 27 Feb 2010 00:49:53 +0300, Andrey Gusev wrote:
> Hello all!
>
> Thera are errors in dmeg on 2.6.33:
>
> [ 6.259606] PowerMac i2c bus pmu 2 registered
> [ 6.262123] PowerMac i2c bus pmu 1 registered
> [ 6.264616] PowerMac i2c bus mac-io 0 registered
> [ 6.267041] i2c i2c-6: I2C transfer at 0x48 failed, size 0, err -6
> [ 6.269629] i2c i2c-6: I2C transfer at 0x49 failed, size 0, err -6
> [ 6.272097] i2c i2c-6: I2C transfer at 0x4a failed, size 0, err -6
> [ 6.274583] i2c i2c-6: I2C transfer at 0x4b failed, size 0, err -6
> [ 6.277010] i2c i2c-6: I2C transfer at 0x4c failed, size 0, err -6
> [ 6.279436] i2c i2c-6: I2C transfer at 0x4d failed, size 0, err -6
> [ 6.281837] i2c i2c-6: I2C transfer at 0x4e failed, size 0, err -6
> [ 6.284006] i2c i2c-6: I2C transfer at 0x4f failed, size 0, err -6
> [ 6.286140] i2c i2c-6: I2C transfer at 0x2c failed, size 0, err -6
> [ 6.288253] i2c i2c-6: I2C transfer at 0x2d failed, size 0, err -6
> [ 6.290353] i2c i2c-6: I2C transfer at 0x2e failed, size 0, err -6
> [ 6.292661] i2c i2c-6: I2C transfer at 0x2f failed, size 0, err -6
> [ 6.294971] PowerMac i2c bus uni-n 1 registered
> [ 6.297484] i2c i2c-7: I2C transfer at 0x48 failed, size 0, err -6
> [ 6.300765] DS1775 digital thermometer [@49]
> [ 6.302772] Temp: 27.0 C Hyst: 75.0 C OS: 80.0 C
> [ 6.305581] ADM1030 fan controller [@2c]
> [ 6.307896] PowerMac i2c bus uni-n 0 registered
>
> Same log on 2.6.32.8:
>
> [ 6.252901] PowerMac i2c bus pmu 2 registered
> [ 6.255852] PowerMac i2c bus pmu 1 registered
> [ 6.258573] PowerMac i2c bus mac-io 0 registered
> [ 6.262216] PowerMac i2c bus uni-n 1 registered
> [ 6.266255] DS1775 digital thermometer [@49]
> [ 6.268665] Temp: 26.5 C Hyst: 75.0 C OS: 80.0 C
> [ 6.271728] ADM1030 fan controller [@2c]
> [ 6.274272] PowerMac i2c bus uni-n 0 registered
I have good news for you: the error messages are harmless and can be
safely ignored. I presume you did not notice any functional problem. I
made the i2c-powermac driver more verbose for debugging purposes and it
appears I've made it a little too verbose in the non-debugging case.
Sorry about that.
The patch below should fix it, if you have the chance to give it a try:
* * * * *
From: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
Subject: i2c-powermac: Be less verbose in the absence of real errors.
Be less verbose in the absence of real errors. We don't have to report
failed probes to the users, it's only confusing them.
Signed-off-by: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
Cc: Benjamin Herrenschmidt <benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
---
drivers/i2c/busses/i2c-powermac.c | 25 ++++++++++++++++++-------
1 file changed, 18 insertions(+), 7 deletions(-)
--- linux-2.6.33.orig/drivers/i2c/busses/i2c-powermac.c 2010-02-25 09:12:22.000000000 +0100
+++ linux-2.6.33/drivers/i2c/busses/i2c-powermac.c 2010-02-27 09:57:51.000000000 +0100
@@ -122,9 +122,14 @@ static s32 i2c_powermac_smbus_xfer( stru
rc = pmac_i2c_xfer(bus, addrdir, subsize, subaddr, buf, len);
if (rc) {
- dev_err(&adap->dev,
- "I2C transfer at 0x%02x failed, size %d, err %d\n",
- addrdir >> 1, size, rc);
+ if (err == -ENXIO)
+ dev_dbg(&adap->dev,
+ "I2C transfer at 0x%02x failed, size %d, "
+ "err %d\n", addrdir >> 1, size, rc);
+ else
+ dev_err(&adap->dev,
+ "I2C transfer at 0x%02x failed, size %d, "
+ "err %d\n", addrdir >> 1, size, rc);
goto bail;
}
@@ -175,10 +180,16 @@ static int i2c_powermac_master_xfer( str
goto bail;
}
rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
- if (rc < 0)
- dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
- addrdir & 1 ? "read from" : "write to", addrdir >> 1,
- rc);
+ if (rc < 0) {
+ if (rc == -ENXIO)
+ dev_dbg(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+ addrdir & 1 ? "read from" : "write to",
+ addrdir >> 1, rc);
+ else
+ dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+ addrdir & 1 ? "read from" : "write to",
+ addrdir >> 1, rc);
+ }
bail:
pmac_i2c_close(bus);
return rc < 0 ? rc : 1;
--
Jean Delvare
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Error ' I2C transfer at 0x48 failed' on 2.6.33
[not found] ` <20100227100420.1016e0c1-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
@ 2010-02-28 13:00 ` Andrey Gusev
2010-03-01 10:50 ` Jean Delvare
0 siblings, 1 reply; 4+ messages in thread
From: Andrey Gusev @ 2010-02-28 13:00 UTC (permalink / raw)
To: Jean Delvare; +Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA, Benjamin Herrenschmidt
В Sat, 27 Feb 2010 10:04:20 +0100
Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org> пишет:
> Hi Andrey,
>
> On Sat, 27 Feb 2010 00:49:53 +0300, Andrey Gusev wrote:
> > Hello all!
> >
> > Thera are errors in dmeg on 2.6.33:
> >
> ....
> ....
> I have good news for you: the error messages are harmless and can be
> safely ignored. I presume you did not notice any functional problem. I
> made the i2c-powermac driver more verbose for debugging purposes and
> it appears I've made it a little too verbose in the non-debugging
> case. Sorry about that.
>
> The patch below should fix it, if you have the chance to give it a
> try:
>
Hi!
I didn't noted ant functional problem, but this looked like regression
and I decided to report about it. I'll try patch.
Thanks,
Andrey
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Error ' I2C transfer at 0x48 failed' on 2.6.33
2010-02-28 13:00 ` Andrey Gusev
@ 2010-03-01 10:50 ` Jean Delvare
0 siblings, 0 replies; 4+ messages in thread
From: Jean Delvare @ 2010-03-01 10:50 UTC (permalink / raw)
To: Andrey Gusev; +Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA, Benjamin Herrenschmidt
On Sun, 28 Feb 2010 16:00:02 +0300, Andrey Gusev wrote:
> I didn't noted ant functional problem, but this looked like regression
> and I decided to report about it. I'll try patch.
Great. Here comes an updated patch, there was a mistake in the first
one that prevented it from building.
* * * * *
From: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
Subject: i2c-powermac: Be less verbose in the absence of real errors.
Be less verbose in the absence of real errors. We don't have to report
failed probes to the users, it's only confusing them.
Signed-off-by: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
Cc: Benjamin Herrenschmidt <benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
Cc: stable-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
---
drivers/i2c/busses/i2c-powermac.c | 25 ++++++++++++++++++-------
1 file changed, 18 insertions(+), 7 deletions(-)
--- linux-2.6.34-rc0.orig/drivers/i2c/busses/i2c-powermac.c 2010-03-01 11:29:48.000000000 +0100
+++ linux-2.6.34-rc0/drivers/i2c/busses/i2c-powermac.c 2010-03-01 11:41:50.000000000 +0100
@@ -122,9 +122,14 @@ static s32 i2c_powermac_smbus_xfer( stru
rc = pmac_i2c_xfer(bus, addrdir, subsize, subaddr, buf, len);
if (rc) {
- dev_err(&adap->dev,
- "I2C transfer at 0x%02x failed, size %d, err %d\n",
- addrdir >> 1, size, rc);
+ if (rc == -ENXIO)
+ dev_dbg(&adap->dev,
+ "I2C transfer at 0x%02x failed, size %d, "
+ "err %d\n", addrdir >> 1, size, rc);
+ else
+ dev_err(&adap->dev,
+ "I2C transfer at 0x%02x failed, size %d, "
+ "err %d\n", addrdir >> 1, size, rc);
goto bail;
}
@@ -175,10 +180,16 @@ static int i2c_powermac_master_xfer( str
goto bail;
}
rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
- if (rc < 0)
- dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
- addrdir & 1 ? "read from" : "write to", addrdir >> 1,
- rc);
+ if (rc < 0) {
+ if (rc == -ENXIO)
+ dev_dbg(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+ addrdir & 1 ? "read from" : "write to",
+ addrdir >> 1, rc);
+ else
+ dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+ addrdir & 1 ? "read from" : "write to",
+ addrdir >> 1, rc);
+ }
bail:
pmac_i2c_close(bus);
return rc < 0 ? rc : 1;
--
Jean Delvare
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-03-01 10:50 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-02-26 21:49 Error ' I2C transfer at 0x48 failed' on 2.6.33 Andrey Gusev
2010-02-27 9:04 ` Jean Delvare
[not found] ` <20100227100420.1016e0c1-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2010-02-28 13:00 ` Andrey Gusev
2010-03-01 10:50 ` Jean Delvare
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.