* [Buildroot] [pull request] Pull request for branch fs-cleanup
@ 2010-04-09 9:06 Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 01/44] genromfs: add new package Thomas Petazzoni
` (45 more replies)
0 siblings, 46 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
This patchset implements a major rework of the code that generates the
root filesystem generation. It is part of a more general work that
aims at cleaning up the contents of the target/ directory.
Each patch has a description detailing its changes but here is the
list of the major steps that this patch set goes through :
* First, I introduce new packages, or new host packages. The idea is
to remove the code in target/*/*.mk that was building tools such as
genromfs, squashfs-tools, mkcramfs to package/ so that 1. we can
leverage the package infrastructure and 2. these packages can also
be made available on the target if needed.
- New genromfs package, supported for both target and host
- New genext2fs package, supported for both target and host
- New cramfs package, supported for both target and host
- New squashfs package, supported for both target and host
note that I removed support for SquashFS 3.x
- New libcap package, supported for both target and host
it is a dependency of cdrkit
- Convert bzip2 to autools + add host package
- New cmake package, supported for the host only.
it is a build dependency of cdrkit
- New cdrkit package, supported for both target and host
it is the new generation of cdrecord/mkisofs tools
- Add host support to e2fsprogs so that libuuid can be built for the
host. Needed to build mtd-utils for the host
- Package mtd-utils converted to gentargets and added host support
so that we can get mkfs.jffs2 and mkfs.ubifs for the host
- New package cloop, supported for the host only
stupid build system, didn't want to fix for cross-build
- Convert lzma to the autotargets infrastructure for the host
* Once this was done, I removed all the host utils generation code
from target/* (where * is a filesystem)
- cloop, which was also converted to use fakeroot instead of sudo
- cpio
- cramfs
- ext2
- iso9660. converted to use genisoimage instead of mkisofs. Same
utility, but genisoimage is the one of cdrkit
- jffs2
- romfs
- squashfs
- tar
- ubifs. and remove the BROKEN mark.
* Sanity work around fakeroot: conversion to autotools for the host
and removal of BR2_HOST_FAKEROOT, since we never use configuration
options for host packages.
* Remove the BR2_TARGET_ROOTFS_xxxx_COPYTO options, designed to copy
the root filesystem image to a custom location after build. Just use
"cp" after using Buildroot.
* Addition of a filesystem generation infrastructure, to factorize the
code to generate the root filesystem images. It is loosely modeled
after our packages infrastructures.
A ROOTFS_TARGET macro does all the work of creating the fakeroot
script. The only thing the filesystem-specific code has to specify
is: 1. list of host dependencies and 2. command to execute to
generate the filesystem image.
* Conversion of most filesystems to the ROOTFS_TARGET infrastructure
- cloop
- cpio
- cramfs
- romfs
- tar
- squashfs
- ext2
- jffs2
- ubifs
- initramfs
Note: iso9660 has to be kept as a manual thing, since its generation
procedure is very very different from the others.
* Removal of the IMAGE internal variable, that was the name of the
generated rootfilesystem (which could be tweaked through
configuration options for a prefix and suffix). Instead, just
hardcode the generation of rootfs.XXXX where XXXX is the filesystem
type.
* Move everything all filesystem generation code in a new top-level
directory "fs/". A new configuration category is created for
Bootloaders, so that they are not mixed with filesystems.
The following changes since commit 6cbdb507c37124d06bdac6a82c81aa5c16e164f9:
Peter Korsgaard (1):
CHANGES: add libaio
are available in the git repository at:
git://git.busybox.net/~tpetazzoni/git/buildroot fs-cleanup
Thomas Petazzoni (44):
genromfs: add new package
genext2fs: new package
cramfs: new package
squashfs: new package
libcap: new package
bzip2: convert to gentargets, add host package, bump version
cmake: new package
cdrkit: new package
e2fsprogs: add support for host package
mtd: convert to gentargets, add host package
cloop: new package
lzma: convert the host package to the autotools infrastructure
target/cloop: cleanup
target/cpio: cleanup
target/cramfs: cleanup
target/ext2: cleanup
target/iso9660: cleanup
target/jffs2: cleanup
target/romfs: cleanup
target/squashfs: cleanup, remove support for 3.x
target/tar: cleanup
target/ubifs: cleanup, unbroken
fakeroot: convert to the autotools infrastructure
fakeroot: remove all references to BR2_HOST_FAKEROOT
target/: remove the COPYTO mess
target: Add new infrastructure for filesystem generation
cloop: convert to ROOTFS_TARGET infrastructure
cpio: convert to ROOTFS_TARGET infrastructure
cramfs: convert to ROOTFS_TARGET infrastructure
romfs: convert to ROOTFS_TARGET infrastructure
tar: convert to ROOTFS_TARGET infrastructure
squashfs: convert to ROOTFS_TARGET infrastructure
ext2: convert to ROOTFS_TARGET infrastructure
jffs2: convert to ROOTFS_TARGET infrastructure
ubifs: convert to ROOTFS_TARGET infrastructure
initramfs: convert to ROOTFS_TARGET infrastructure
busybox initramfs: do not use the IMAGE variable
target/common: do not use IMAGE
iso9660: rework in a similar way to ROOTFS_TARGET
Remove IMAGE and related configuration options
Move all filesystem generation code to fs/
Coherent naming for .mk files in fs/
Update defconfigs after fs cleanup
fs/*/Config.in: remove useless configuration comments
Config.in | 2 +
Makefile | 2 +
configs/at91rm9200df_defconfig | 9 +-
configs/at91rm9200df_ext_defconfig | 9 +-
configs/at91sam9260dfc_defconfig | 9 +-
configs/at91sam9260dfc_ext_defconfig | 9 +-
configs/at91sam9260pf_defconfig | 5 +-
configs/at91sam9261ek_defconfig | 9 +-
configs/at91sam9261ek_ext_defconfig | 9 +-
configs/at91sam9263ek_defconfig | 9 +-
configs/at91sam9263ek_ext_defconfig | 9 +-
configs/at91sam9g20dfc_defconfig | 9 +-
configs/at91sam9g20dfc_ext_defconfig | 9 +-
configs/atngw100-base_defconfig | 7 +-
configs/atngw100_defconfig | 7 +-
configs/atstk1005_defconfig | 7 +-
configs/atstk100x_defconfig | 7 +-
configs/i386_defconfig | 5 +-
configs/i686_defconfig | 5 +-
configs/integrator926_defconfig | 7 +-
configs/integrator926_huge_defconfig | 7 +-
configs/kb9202_defconfig | 3 +-
configs/v100sc2_defconfig | 3 +-
fs/Config.in | 30 ++++
{target => fs}/cloop/Config.in | 0
fs/cloop/cloop.mk | 13 ++
fs/common.mk | 70 ++++++++++
fs/cpio/Config.in | 34 +++++
fs/cpio/cpio.mk | 18 +++
{target => fs}/cramfs/Config.in | 1 -
fs/cramfs/cramfs.mk | 22 +++
fs/ext2/Config.in | 55 ++++++++
fs/ext2/ext2.mk | 40 ++++++
{target => fs}/initramfs/Config.in | 0
{target => fs}/initramfs/gen_initramfs_list.sh | 0
fs/initramfs/initramfs.mk | 18 +++
{target => fs}/iso9660/Config.in | 6 -
fs/iso9660/iso9660.mk | 49 +++++++
{target => fs}/iso9660/menu.lst | 0
{target => fs}/jffs2/Config.in | 11 --
fs/jffs2/jffs2.mk | 61 ++++++++
{target => fs}/romfs/Config.in | 1 -
fs/romfs/romfs.mk | 15 ++
fs/squashfs/Config.in | 4 +
fs/squashfs/squashfs.mk | 13 ++
fs/tar/Config.in | 41 ++++++
fs/tar/tar.mk | 13 ++
fs/ubifs/Config.in | 79 +++++++++++
fs/ubifs/ubifs.mk | 25 ++++
package/Config.in | 6 +
package/Makefile.in | 4 -
package/busybox/initramfs.mk | 2 +-
package/bzip2/bzip2.mk | 140 ++++++++-----------
package/cdrkit/Config.in | 11 ++
package/cdrkit/cdrkit.mk | 63 +++++++++
package/cloop/cloop.mk | 18 +++
package/cmake/cmake.mk | 20 +++
package/cramfs/Config.in | 7 +
.../cramfs/cramfs-01-devtable.patch | 0
{target => package}/cramfs/cramfs-02-endian.patch | 0
.../cramfs/cramfs-03-cygwin_IO.patch | 0
package/cramfs/cramfs.mk | 33 +++++
package/e2fsprogs/e2fsprogs.mk | 5 +
package/fakeroot/Config.in | 4 -
package/fakeroot/fakeroot.mk | 126 ++---------------
package/genext2fs/Config.in | 9 ++
.../genext2fs}/genext2fs-1.4-nosquash.patch | 0
.../genext2fs-1.4-remove_ugly_warnings.patch | 0
package/genext2fs/genext2fs.mk | 12 ++
package/genromfs/Config.in | 6 +
package/genromfs/genromfs-0.5.2-build-system.patch | 26 ++++
package/genromfs/genromfs.mk | 31 ++++
package/libcap/Config.in | 10 ++
package/libcap/libcap-2.19-build-system.patch | 55 ++++++++
package/libcap/libcap.mk | 27 ++++
package/lzma/lzma.mk | 65 +---------
package/mtd/mtd.mk | 144 ++++++-------------
package/squashfs/Config.in | 6 +
.../squashfs/squashfs-4.0-build-system-fix.patch | 11 +-
...quashfs-4.0-mksquashfs-race-condition-fix.patch | 0
package/squashfs/squashfs.mk | 30 ++++
scripts/test/Config.in.test.buildall | 1 -
target/Config.in | 45 +------
target/Makefile.in | 1 -
target/cloop/Makefile.in | 3 -
target/cloop/cloop.mk | 108 ---------------
target/cpio/Config.in | 50 -------
target/cpio/cpioroot.mk | 87 ------------
target/cramfs/cramfs.mk | 86 ------------
target/ext2/Config.in | 75 ----------
target/ext2/ext2root.mk | 146 --------------------
target/initramfs/initramfs.mk | 43 ------
target/iso9660/iso9660.mk | 95 -------------
target/jffs2/jffs2root.mk | 99 -------------
target/romfs/romfs.mk | 71 ----------
target/squashfs/Config.in | 32 -----
.../squashfs/squashfs-3.4-build-system-fix.patch | 28 ----
target/squashfs/squashfsroot.mk | 85 ------------
target/tar/Config.in | 59 --------
target/tar/tarroot.mk | 64 ---------
target/ubifs/Config.in | 103 --------------
target/ubifs/ubifsroot.mk | 125 -----------------
target/xtensa/defconfig | 1 -
toolchain/dependencies/dependencies.sh | 2 +-
104 files changed, 1172 insertions(+), 1884 deletions(-)
create mode 100644 fs/Config.in
rename {target => fs}/cloop/Config.in (100%)
create mode 100644 fs/cloop/cloop.mk
create mode 100644 fs/common.mk
create mode 100644 fs/cpio/Config.in
create mode 100644 fs/cpio/cpio.mk
rename {target => fs}/cramfs/Config.in (84%)
create mode 100644 fs/cramfs/cramfs.mk
create mode 100644 fs/ext2/Config.in
create mode 100644 fs/ext2/ext2.mk
rename {target => fs}/initramfs/Config.in (100%)
rename {target => fs}/initramfs/gen_initramfs_list.sh (100%)
create mode 100644 fs/initramfs/initramfs.mk
rename {target => fs}/iso9660/Config.in (74%)
create mode 100644 fs/iso9660/iso9660.mk
rename {target => fs}/iso9660/menu.lst (100%)
rename {target => fs}/jffs2/Config.in (93%)
create mode 100644 fs/jffs2/jffs2.mk
rename {target => fs}/romfs/Config.in (81%)
create mode 100644 fs/romfs/romfs.mk
create mode 100644 fs/squashfs/Config.in
create mode 100644 fs/squashfs/squashfs.mk
create mode 100644 fs/tar/Config.in
create mode 100644 fs/tar/tar.mk
create mode 100644 fs/ubifs/Config.in
create mode 100644 fs/ubifs/ubifs.mk
create mode 100644 package/cdrkit/Config.in
create mode 100644 package/cdrkit/cdrkit.mk
create mode 100644 package/cloop/cloop.mk
create mode 100644 package/cmake/cmake.mk
create mode 100644 package/cramfs/Config.in
rename {target => package}/cramfs/cramfs-01-devtable.patch (100%)
rename {target => package}/cramfs/cramfs-02-endian.patch (100%)
rename {target => package}/cramfs/cramfs-03-cygwin_IO.patch (100%)
create mode 100644 package/cramfs/cramfs.mk
create mode 100644 package/genext2fs/Config.in
rename {target/ext2 => package/genext2fs}/genext2fs-1.4-nosquash.patch (100%)
rename {target/ext2 => package/genext2fs}/genext2fs-1.4-remove_ugly_warnings.patch (100%)
create mode 100644 package/genext2fs/genext2fs.mk
create mode 100644 package/genromfs/Config.in
create mode 100644 package/genromfs/genromfs-0.5.2-build-system.patch
create mode 100644 package/genromfs/genromfs.mk
create mode 100644 package/libcap/Config.in
create mode 100644 package/libcap/libcap-2.19-build-system.patch
create mode 100644 package/libcap/libcap.mk
create mode 100644 package/squashfs/Config.in
rename {target => package}/squashfs/squashfs-4.0-build-system-fix.patch (88%)
rename {target => package}/squashfs/squashfs-4.0-mksquashfs-race-condition-fix.patch (100%)
create mode 100644 package/squashfs/squashfs.mk
delete mode 100644 target/cloop/Makefile.in
delete mode 100644 target/cloop/cloop.mk
delete mode 100644 target/cpio/Config.in
delete mode 100644 target/cpio/cpioroot.mk
delete mode 100644 target/cramfs/cramfs.mk
delete mode 100644 target/ext2/Config.in
delete mode 100644 target/ext2/ext2root.mk
delete mode 100644 target/initramfs/initramfs.mk
delete mode 100644 target/iso9660/iso9660.mk
delete mode 100644 target/jffs2/jffs2root.mk
delete mode 100644 target/romfs/romfs.mk
delete mode 100644 target/squashfs/Config.in
delete mode 100644 target/squashfs/squashfs-3.4-build-system-fix.patch
delete mode 100644 target/squashfs/squashfsroot.mk
delete mode 100644 target/tar/Config.in
delete mode 100644 target/tar/tarroot.mk
delete mode 100644 target/ubifs/Config.in
delete mode 100644 target/ubifs/ubifsroot.mk
Thanks,
--
Thomas Petazzoni
^ permalink raw reply [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 01/44] genromfs: add new package
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 02/44] genext2fs: " Thomas Petazzoni
` (44 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/Config.in | 1 +
package/genromfs/Config.in | 6 ++++
package/genromfs/genromfs-0.5.2-build-system.patch | 26 ++++++++++++++++
package/genromfs/genromfs.mk | 31 ++++++++++++++++++++
4 files changed, 64 insertions(+), 0 deletions(-)
create mode 100644 package/genromfs/Config.in
create mode 100644 package/genromfs/genromfs-0.5.2-build-system.patch
create mode 100644 package/genromfs/genromfs.mk
diff --git a/package/Config.in b/package/Config.in
index 6a695cb..9c75fcc 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -159,6 +159,7 @@ source "package/eeprog/Config.in"
source "package/fconfig/Config.in"
source "package/fis/Config.in"
source "package/gadgetfs-test/Config.in"
+source "package/genromfs/Config.in"
source "package/gvfs/Config.in"
source "package/hal/Config.in"
if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
diff --git a/package/genromfs/Config.in b/package/genromfs/Config.in
new file mode 100644
index 0000000..2caf2a4
--- /dev/null
+++ b/package/genromfs/Config.in
@@ -0,0 +1,6 @@
+config BR2_PACKAGE_GENROMFS
+ bool "genromfs"
+ help
+ Tool to generate a ROMFS filesystem.
+
+ http://romfs.sourceforge.net/
\ No newline at end of file
diff --git a/package/genromfs/genromfs-0.5.2-build-system.patch b/package/genromfs/genromfs-0.5.2-build-system.patch
new file mode 100644
index 0000000..827fe75
--- /dev/null
+++ b/package/genromfs/genromfs-0.5.2-build-system.patch
@@ -0,0 +1,26 @@
+---
+ Makefile | 4 +---
+ 1 file changed, 1 insertion(+), 3 deletions(-)
+
+Index: genromfs-0.5.2/Makefile
+===================================================================
+--- genromfs-0.5.2.orig/Makefile
++++ genromfs-0.5.2/Makefile
+@@ -6,8 +6,6 @@
+ PACKAGE = genromfs
+ VERSION = 0.5.2
+ CC = gcc
+-CFLAGS = -O2 -Wall -DVERSION=\"$(VERSION)\"#-g#
+-LDFLAGS = -s#-g
+
+ DISTDIR = $(PACKAGE)-$(VERSION)
+
+@@ -24,7 +22,7 @@
+ $(CC) $(LDFLAGS) genromfs.o -o genromfs
+
+ .c.o:
+- $(CC) $(CFLAGS) $< -c -o $@
++ $(CC) $(CFLAGS) -DVERSION=\"$(VERSION)\" $< -c -o $@
+
+ clean:
+ rm -f genromfs *.o
diff --git a/package/genromfs/genromfs.mk b/package/genromfs/genromfs.mk
new file mode 100644
index 0000000..10b8d7d
--- /dev/null
+++ b/package/genromfs/genromfs.mk
@@ -0,0 +1,31 @@
+#############################################################
+#
+# genromfs
+#
+#############################################################
+
+GENROMFS_VERSION=0.5.2
+GENROMFS_SOURCE=genromfs-$(GENROMFS_VERSION).tar.gz
+GENROMFS_SITE=http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/romfs
+
+define GENROMFS_BUILD_CMDS
+ $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \
+ CC="$(TARGET_CC)" \
+ CFLAGS="$(TARGET_CFLAGS)" \
+ LDFLAGS="$(TARGET_LDFLAGS)"
+endef
+
+define GENROMFS_INSTALL_TARGET_CMDS
+ $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) PREFIX=$(TARGET_DIR) install
+endef
+
+define HOST_GENROMFS_BUILD_CMDS
+ $(HOST_MAKE_ENV) $(MAKE) -C $(@D)
+endef
+
+define HOST_GENROMFS_INSTALL_CMDS
+ $(HOST_MAKE_ENV) $(MAKE) -C $(@D) PREFIX=$(HOST_DIR) install
+endef
+
+$(eval $(call GENTARGETS,package,genromfs))
+$(eval $(call GENTARGETS,package,genromfs,host))
\ No newline@end of file
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 02/44] genext2fs: new package
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 01/44] genromfs: add new package Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 03/44] cramfs: " Thomas Petazzoni
` (43 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/Config.in | 1 +
package/genext2fs/Config.in | 9 +++++++++
.../genext2fs}/genext2fs-1.4-nosquash.patch | 0
.../genext2fs-1.4-remove_ugly_warnings.patch | 0
package/genext2fs/genext2fs.mk | 12 ++++++++++++
5 files changed, 22 insertions(+), 0 deletions(-)
create mode 100644 package/genext2fs/Config.in
rename {target/ext2 => package/genext2fs}/genext2fs-1.4-nosquash.patch (100%)
rename {target/ext2 => package/genext2fs}/genext2fs-1.4-remove_ugly_warnings.patch (100%)
create mode 100644 package/genext2fs/genext2fs.mk
diff --git a/package/Config.in b/package/Config.in
index 9c75fcc..856048a 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -159,6 +159,7 @@ source "package/eeprog/Config.in"
source "package/fconfig/Config.in"
source "package/fis/Config.in"
source "package/gadgetfs-test/Config.in"
+source "package/genext2fs/Config.in"
source "package/genromfs/Config.in"
source "package/gvfs/Config.in"
source "package/hal/Config.in"
diff --git a/package/genext2fs/Config.in b/package/genext2fs/Config.in
new file mode 100644
index 0000000..82992f8
--- /dev/null
+++ b/package/genext2fs/Config.in
@@ -0,0 +1,9 @@
+config BR2_PACKAGE_GENEXT2FS
+ bool "genext2fs"
+ help
+ genext2fs generates an ext2 filesystem as a normal (non-root)
+ user. It does not require you to mount the image file to
+ copy files on it, nor does it require that you become the
+ superuser to make device nodes.
+
+ http://genext2fs.sourceforge.net/
diff --git a/target/ext2/genext2fs-1.4-nosquash.patch b/package/genext2fs/genext2fs-1.4-nosquash.patch
similarity index 100%
rename from target/ext2/genext2fs-1.4-nosquash.patch
rename to package/genext2fs/genext2fs-1.4-nosquash.patch
diff --git a/target/ext2/genext2fs-1.4-remove_ugly_warnings.patch b/package/genext2fs/genext2fs-1.4-remove_ugly_warnings.patch
similarity index 100%
rename from target/ext2/genext2fs-1.4-remove_ugly_warnings.patch
rename to package/genext2fs/genext2fs-1.4-remove_ugly_warnings.patch
diff --git a/package/genext2fs/genext2fs.mk b/package/genext2fs/genext2fs.mk
new file mode 100644
index 0000000..8c4981e
--- /dev/null
+++ b/package/genext2fs/genext2fs.mk
@@ -0,0 +1,12 @@
+#############################################################
+#
+# genext2fs
+#
+#############################################################
+
+GENEXT2FS_VERSION=1.4
+GENEXT2FS_SOURCE=genext2fs-$(GENEXT2FS_VERSION).tar.gz
+GENEXT2FS_SITE:=http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/genext2fs
+
+$(eval $(call AUTOTARGETS,package,genext2fs))
+$(eval $(call AUTOTARGETS,package,genext2fs,host))
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 03/44] cramfs: new package
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 01/44] genromfs: add new package Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 02/44] genext2fs: " Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 04/44] squashfs: " Thomas Petazzoni
` (42 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/Config.in | 1 +
package/cramfs/Config.in | 7 +
package/cramfs/cramfs-01-devtable.patch | 1269 ++++++++++++++++++++++++++++++
package/cramfs/cramfs-02-endian.patch | 284 +++++++
package/cramfs/cramfs-03-cygwin_IO.patch | 13 +
package/cramfs/cramfs.mk | 33 +
6 files changed, 1607 insertions(+), 0 deletions(-)
create mode 100644 package/cramfs/Config.in
create mode 100644 package/cramfs/cramfs-01-devtable.patch
create mode 100644 package/cramfs/cramfs-02-endian.patch
create mode 100644 package/cramfs/cramfs-03-cygwin_IO.patch
create mode 100644 package/cramfs/cramfs.mk
diff --git a/package/Config.in b/package/Config.in
index 856048a..5a7bf27 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -146,6 +146,7 @@ endmenu
menu "Hardware handling"
source "package/acpid/Config.in"
+source "package/cramfs/Config.in"
source "package/dbus/Config.in"
source "package/dbus-glib/Config.in"
source "package/dbus-python/Config.in"
diff --git a/package/cramfs/Config.in b/package/cramfs/Config.in
new file mode 100644
index 0000000..553fb8a
--- /dev/null
+++ b/package/cramfs/Config.in
@@ -0,0 +1,7 @@
+config BR2_PACKAGE_CRAMFS
+ bool "cramfs"
+ help
+ cramfs is a comporessed read-only filesystem. This package
+ contains the tools to generate and check a cramfs filesystem.
+
+ http://sourceforge.net/projects/cramfs/
\ No newline at end of file
diff --git a/package/cramfs/cramfs-01-devtable.patch b/package/cramfs/cramfs-01-devtable.patch
new file mode 100644
index 0000000..884eb8c
--- /dev/null
+++ b/package/cramfs/cramfs-01-devtable.patch
@@ -0,0 +1,1269 @@
+--- cramfs-1.1.orig/cramfsck.c 2002-02-22 17:00:42.000000000 -0700
++++ cramfs-1.1/cramfsck.c 2002-12-21 01:25:17.000000000 -0700
+@@ -51,10 +51,11 @@
+ #include <utime.h>
+ #include <sys/ioctl.h>
+ #define _LINUX_STRING_H_
+-#include <linux/fs.h>
+-#include <linux/cramfs_fs.h>
++#include "linux/cramfs_fs.h"
+ #include <zlib.h>
+
++#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */
++
+ /* Exit codes used by fsck-type programs */
+ #define FSCK_OK 0 /* No errors */
+ #define FSCK_NONDESTRUCT 1 /* File system errors corrected */
+@@ -75,7 +76,7 @@
+ static int opt_verbose = 0; /* 1 = verbose (-v), 2+ = very verbose (-vv) */
+ #ifdef INCLUDE_FS_TESTS
+ static int opt_extract = 0; /* extract cramfs (-x) */
+-static char *extract_dir = "root"; /* extraction directory (-x) */
++static char *extract_dir = "/"; /* extraction directory (-x) */
+ static uid_t euid; /* effective UID */
+
+ /* (cramfs_super + start) <= start_dir < end_dir <= start_data <= end_data */
+@@ -155,7 +156,7 @@
+ }
+
+ if (*length < sizeof(struct cramfs_super)) {
+- die(FSCK_UNCORRECTED, 0, "file length too short");
++ die(FSCK_UNCORRECTED, 0, "filesystem smaller than a cramfs superblock!");
+ }
+
+ /* find superblock */
+@@ -190,7 +191,8 @@
+ die(FSCK_UNCORRECTED, 0, "zero file count");
+ }
+ if (*length < super.size) {
+- die(FSCK_UNCORRECTED, 0, "file length too short");
++ die(FSCK_UNCORRECTED, 0, "file length too short, %lu is smaller than %lu",
++ *length, super.size);
+ }
+ else if (*length > super.size) {
+ fprintf(stderr, "warning: file extends past end of filesystem\n");
+@@ -267,11 +269,11 @@
+ #ifdef INCLUDE_FS_TESTS
+ static void print_node(char type, struct cramfs_inode *i, char *name)
+ {
+- char info[10];
++ char info[11];
+
+ if (S_ISCHR(i->mode) || (S_ISBLK(i->mode))) {
+ /* major/minor numbers can be as high as 2^12 or 4096 */
+- snprintf(info, 10, "%4d,%4d", major(i->size), minor(i->size));
++ snprintf(info, 11, "%4d,%4d", major(i->size), minor(i->size));
+ }
+ else {
+ /* size be as high as 2^24 or 16777216 */
+@@ -445,8 +447,10 @@
+ }
+ /* TODO: Do we need to check end_dir for empty case? */
+ memcpy(newpath, path, pathlen);
+- newpath[pathlen] = '/';
+- pathlen++;
++ if (pathlen > 1) {
++ newpath[pathlen] = '/';
++ pathlen++;
++ }
+ if (opt_verbose) {
+ print_node('d', i, path);
+ }
+--- cramfs-1.1.orig/device_table.txt 1969-12-31 17:00:00.000000000 -0700
++++ cramfs-1.1/device_table.txt 2003-01-01 05:13:44.000000000 -0700
+@@ -0,0 +1,129 @@
++# When building a target filesystem, it is desirable to not have to
++# become root and then run 'mknod' a thousand times. Using a device
++# table you can create device nodes and directories "on the fly".
++#
++# This is a sample device table file for use with mkcramfs. You can
++# do all sorts of interesting things with a device table file. For
++# example, if you want to adjust the permissions on a particular file
++# you can just add an entry like:
++# /sbin/foobar f 2755 0 0 - - - - -
++# and (assuming the file /sbin/foobar exists) it will be made setuid
++# root (regardless of what its permissions are on the host filesystem.
++# Furthermore, you can use a single table entry to create a many device
++# minors. For example, if I wanted to create /dev/hda and /dev/hda[0-15]
++# I could just use the following two table entries:
++# /dev/hda b 640 0 0 3 0 0 0 -
++# /dev/hda b 640 0 0 3 1 1 1 15
++#
++# Device table entries take the form of:
++# <name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
++# where name is the file name, type can be one of:
++# f A regular file
++# d Directory
++# c Character special device file
++# b Block special device file
++# p Fifo (named pipe)
++# uid is the user id for the target file, gid is the group id for the
++# target file. The rest of the entries (major, minor, etc) apply only
++# to device special files.
++
++# Have fun
++# -Erik Andersen <andersen@codepoet.org>
++#
++
++#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
++/dev d 755 0 0 - - - - -
++/dev/mem c 640 0 0 1 1 0 0 -
++/dev/kmem c 640 0 0 1 2 0 0 -
++/dev/null c 640 0 0 1 3 0 0 -
++/dev/zero c 640 0 0 1 5 0 0 -
++/dev/random c 640 0 0 1 8 0 0 -
++/dev/urandom c 640 0 0 1 9 0 0 -
++/dev/tty c 666 0 0 5 0 0 0 -
++/dev/tty c 666 0 0 4 0 0 1 6
++/dev/console c 640 0 0 5 1 0 0 -
++/dev/ram b 640 0 0 1 1 0 0 -
++/dev/ram b 640 0 0 1 0 0 1 4
++/dev/loop b 640 0 0 7 0 0 1 2
++/dev/ptmx c 666 0 0 5 2 0 0 -
++#/dev/ttyS c 640 0 0 4 64 0 1 4
++#/dev/psaux c 640 0 0 10 1 0 0 -
++#/dev/rtc c 640 0 0 10 135 0 0 -
++
++# Adjust permissions on some normal files
++#/etc/shadow f 600 0 0 - - - - -
++#/bin/tinylogin f 4755 0 0 - - - - -
++
++# User-mode Linux stuff
++/dev/ubda b 640 0 0 98 0 0 0 -
++/dev/ubda b 640 0 0 98 1 1 1 15
++
++# IDE Devices
++/dev/hda b 640 0 0 3 0 0 0 -
++/dev/hda b 640 0 0 3 1 1 1 15
++/dev/hdb b 640 0 0 3 64 0 0 -
++/dev/hdb b 640 0 0 3 65 1 1 15
++#/dev/hdc b 640 0 0 22 0 0 0 -
++#/dev/hdc b 640 0 0 22 1 1 1 15
++#/dev/hdd b 640 0 0 22 64 0 0 -
++#/dev/hdd b 640 0 0 22 65 1 1 15
++#/dev/hde b 640 0 0 33 0 0 0 -
++#/dev/hde b 640 0 0 33 1 1 1 15
++#/dev/hdf b 640 0 0 33 64 0 0 -
++#/dev/hdf b 640 0 0 33 65 1 1 15
++#/dev/hdg b 640 0 0 34 0 0 0 -
++#/dev/hdg b 640 0 0 34 1 1 1 15
++#/dev/hdh b 640 0 0 34 64 0 0 -
++#/dev/hdh b 640 0 0 34 65 1 1 15
++
++# SCSI Devices
++#/dev/sda b 640 0 0 8 0 0 0 -
++#/dev/sda b 640 0 0 8 1 1 1 15
++#/dev/sdb b 640 0 0 8 16 0 0 -
++#/dev/sdb b 640 0 0 8 17 1 1 15
++#/dev/sdc b 640 0 0 8 32 0 0 -
++#/dev/sdc b 640 0 0 8 33 1 1 15
++#/dev/sdd b 640 0 0 8 48 0 0 -
++#/dev/sdd b 640 0 0 8 49 1 1 15
++#/dev/sde b 640 0 0 8 64 0 0 -
++#/dev/sde b 640 0 0 8 65 1 1 15
++#/dev/sdf b 640 0 0 8 80 0 0 -
++#/dev/sdf b 640 0 0 8 81 1 1 15
++#/dev/sdg b 640 0 0 8 96 0 0 -
++#/dev/sdg b 640 0 0 8 97 1 1 15
++#/dev/sdh b 640 0 0 8 112 0 0 -
++#/dev/sdh b 640 0 0 8 113 1 1 15
++#/dev/sg c 640 0 0 21 0 0 1 15
++#/dev/scd b 640 0 0 11 0 0 1 15
++#/dev/st c 640 0 0 9 0 0 1 8
++#/dev/nst c 640 0 0 9 128 0 1 8
++#/dev/st c 640 0 0 9 32 1 1 4
++#/dev/st c 640 0 0 9 64 1 1 4
++#/dev/st c 640 0 0 9 96 1 1 4
++
++# Floppy disk devices
++#/dev/fd b 640 0 0 2 0 0 1 2
++#/dev/fd0d360 b 640 0 0 2 4 0 0 -
++#/dev/fd1d360 b 640 0 0 2 5 0 0 -
++#/dev/fd0h1200 b 640 0 0 2 8 0 0 -
++#/dev/fd1h1200 b 640 0 0 2 9 0 0 -
++#/dev/fd0u1440 b 640 0 0 2 28 0 0 -
++#/dev/fd1u1440 b 640 0 0 2 29 0 0 -
++#/dev/fd0u2880 b 640 0 0 2 32 0 0 -
++#/dev/fd1u2880 b 640 0 0 2 33 0 0 -
++
++# All the proprietary cdrom devices in the world
++#/dev/aztcd b 640 0 0 29 0 0 0 -
++#/dev/bpcd b 640 0 0 41 0 0 0 -
++#/dev/capi20 c 640 0 0 68 0 0 1 2
++#/dev/cdu31a b 640 0 0 15 0 0 0 -
++#/dev/cdu535 b 640 0 0 24 0 0 0 -
++#/dev/cm206cd b 640 0 0 32 0 0 0 -
++#/dev/sjcd b 640 0 0 18 0 0 0 -
++#/dev/sonycd b 640 0 0 15 0 0 0 -
++#/dev/gscd b 640 0 0 16 0 0 0 -
++#/dev/sbpcd b 640 0 0 25 0 0 0 -
++#/dev/sbpcd b 640 0 0 25 0 0 1 4
++#/dev/mcd b 640 0 0 23 0 0 0 -
++#/dev/optcd b 640 0 0 17 0 0 0 -
++
+--- cramfs-1.1.orig/mkcramfs.c 2002-02-20 01:03:32.000000000 -0700
++++ cramfs-1.1/mkcramfs.c 2002-12-21 01:25:17.000000000 -0700
+@@ -1,3 +1,4 @@
++/* vi: set sw=8 ts=8: */
+ /*
+ * mkcramfs - make a cramfs file system
+ *
+@@ -16,12 +17,21 @@
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ * Added device table support (code taken from mkfs.jffs2.c, credit to
++ * Erik Andersen <andersen@codepoet.org>) as well as an option to squash
++ * permissions. - Russ Dill <Russ.Dill@asu.edu> September 2002
++ *
++ * Reworked, cleaned up, and updated for cramfs-1.1, December 2002
++ * - Erik Andersen <andersen@codepoet.org>
++ *
+ */
+
+ /*
+ * If you change the disk format of cramfs, please update fs/cramfs/README.
+ */
+
++#define _GNU_SOURCE
+ #include <sys/types.h>
+ #include <stdio.h>
+ #include <sys/stat.h>
+@@ -33,8 +43,15 @@
+ #include <errno.h>
+ #include <string.h>
+ #include <stdarg.h>
++#include <libgen.h>
++#include <ctype.h>
++#include <assert.h>
++#include <getopt.h>
+ #include <linux/cramfs_fs.h>
+ #include <zlib.h>
++#ifdef DMALLOC
++#include <dmalloc.h>
++#endif
+
+ /* Exit codes used by mkfs-type programs */
+ #define MKFS_OK 0 /* No errors */
+@@ -71,11 +88,17 @@
+ + (1 << CRAMFS_SIZE_WIDTH) - 1 /* filesize */ \
+ + (1 << CRAMFS_SIZE_WIDTH) * 4 / PAGE_CACHE_SIZE /* block pointers */ )
+
++
++/* The kernel assumes PAGE_CACHE_SIZE as block size. */
++#define PAGE_CACHE_SIZE (4096)
++
++
+ static const char *progname = "mkcramfs";
+ static unsigned int blksize = PAGE_CACHE_SIZE;
+ static long total_blocks = 0, total_nodes = 1; /* pre-count the root node */
+ static int image_length = 0;
+
++
+ /*
+ * If opt_holes is set, then mkcramfs can create explicit holes in the
+ * data, which saves 26 bytes per hole (which is a lot smaller a
+@@ -91,10 +114,12 @@
+ static int opt_holes = 0;
+ static int opt_pad = 0;
+ static int opt_verbose = 0;
++static int opt_squash = 0;
+ static char *opt_image = NULL;
+ static char *opt_name = NULL;
+
+ static int warn_dev, warn_gid, warn_namelen, warn_skip, warn_size, warn_uid;
++static const char *const memory_exhausted = "memory exhausted";
+
+ /* In-core version of inode / directory entry. */
+ struct entry {
+@@ -123,7 +148,7 @@
+ {
+ FILE *stream = status ? stderr : stdout;
+
+- fprintf(stream, "usage: %s [-h] [-e edition] [-i file] [-n name] dirname outfile\n"
++ fprintf(stream, "usage: %s [-h] [-e edition] [-i file] [-n name] [-D file] dirname outfile\n"
+ " -h print this help\n"
+ " -E make all warnings errors (non-zero exit status)\n"
+ " -e edition set edition number (part of fsid)\n"
+@@ -133,39 +158,157 @@
+ " -s sort directory entries (old option, ignored)\n"
+ " -v be more verbose\n"
+ " -z make explicit holes (requires >= 2.3.39)\n"
+- " dirname root of the directory tree to be compressed\n"
++ " -D Use the named FILE as a device table file\n"
++ " -q squash permissions (make everything owned by root)\n"
++ " dirname root of the filesystem to be compressed\n"
+ " outfile output file\n", progname, PAD_SIZE);
+
+ exit(status);
+ }
+
+-static void die(int status, int syserr, const char *fmt, ...)
++static void verror_msg(const char *s, va_list p)
++{
++ fflush(stdout);
++ fprintf(stderr, "mkcramfs: ");
++ vfprintf(stderr, s, p);
++}
++
++static void vperror_msg(const char *s, va_list p)
++{
++ int err = errno;
++
++ if (s == 0)
++ s = "";
++ verror_msg(s, p);
++ if (*s)
++ s = ": ";
++ fprintf(stderr, "%s%s\n", s, strerror(err));
++}
++
++static void perror_msg(const char *s, ...)
++{
++ va_list p;
++
++ va_start(p, s);
++ vperror_msg(s, p);
++ va_end(p);
++}
++
++static void error_msg_and_die(const char *s, ...)
++{
++ va_list p;
++
++ va_start(p, s);
++ verror_msg(s, p);
++ va_end(p);
++ putc('\n', stderr);
++ exit(MKFS_ERROR);
++}
++
++static void perror_msg_and_die(const char *s, ...)
++{
++ va_list p;
++
++ va_start(p, s);
++ vperror_msg(s, p);
++ va_end(p);
++ exit(MKFS_ERROR);
++}
++#ifndef DMALLOC
++extern char *xstrdup(const char *s)
++{
++ char *t;
++
++ if (s == NULL)
++ return NULL;
++ t = strdup(s);
++ if (t == NULL)
++ error_msg_and_die(memory_exhausted);
++ return t;
++}
++
++extern void *xmalloc(size_t size)
++{
++ void *ptr = malloc(size);
++
++ if (ptr == NULL && size != 0)
++ error_msg_and_die(memory_exhausted);
++ return ptr;
++}
++
++extern void *xcalloc(size_t nmemb, size_t size)
++{
++ void *ptr = calloc(nmemb, size);
++
++ if (ptr == NULL && nmemb != 0 && size != 0)
++ error_msg_and_die(memory_exhausted);
++ return ptr;
++}
++
++extern void *xrealloc(void *ptr, size_t size)
++{
++ ptr = realloc(ptr, size);
++ if (ptr == NULL && size != 0)
++ error_msg_and_die(memory_exhausted);
++ return ptr;
++}
++#endif
++
++static FILE *xfopen(const char *path, const char *mode)
+ {
+- va_list arg_ptr;
+- int save = errno;
++ FILE *fp;
++
++ if ((fp = fopen(path, mode)) == NULL)
++ perror_msg_and_die("%s", path);
++ return fp;
++}
+
+- fflush(0);
+- va_start(arg_ptr, fmt);
+- fprintf(stderr, "%s: ", progname);
+- vfprintf(stderr, fmt, arg_ptr);
+- if (syserr) {
+- fprintf(stderr, ": %s", strerror(save));
++extern int xopen(const char *pathname, int flags, mode_t mode)
++{
++ int ret;
++
++ if (flags & O_CREAT)
++ ret = open(pathname, flags, mode);
++ else
++ ret = open(pathname, flags);
++ if (ret == -1) {
++ perror_msg_and_die("%s", pathname);
+ }
+- fprintf(stderr, "\n");
+- va_end(arg_ptr);
+- exit(status);
++ return ret;
+ }
+
++extern char *xreadlink(const char *path)
++{
++ static const int GROWBY = 80; /* how large we will grow strings by */
++
++ char *buf = NULL;
++ int bufsize = 0, readsize = 0;
++
++ do {
++ buf = xrealloc(buf, bufsize += GROWBY);
++ readsize = readlink(path, buf, bufsize); /* 1st try */
++ if (readsize == -1) {
++ perror_msg("%s:%s", progname, path);
++ return NULL;
++ }
++ }
++ while (bufsize < readsize + 1);
++
++ buf[readsize] = '\0';
++
++ return buf;
++}
++
+ static void map_entry(struct entry *entry)
+ {
+ if (entry->path) {
+ entry->fd = open(entry->path, O_RDONLY);
+ if (entry->fd < 0) {
+- die(MKFS_ERROR, 1, "open failed: %s", entry->path);
++ error_msg_and_die("open failed: %s", entry->path);
+ }
+ entry->uncompressed = mmap(NULL, entry->size, PROT_READ, MAP_PRIVATE, entry->fd, 0);
+ if (entry->uncompressed == MAP_FAILED) {
+- die(MKFS_ERROR, 1, "mmap failed: %s", entry->path);
++ error_msg_and_die("mmap failed: %s", entry->path);
+ }
+ }
+ }
+@@ -174,8 +317,9 @@
+ {
+ if (entry->path) {
+ if (munmap(entry->uncompressed, entry->size) < 0) {
+- die(MKFS_ERROR, 1, "munmap failed: %s", entry->path);
++ error_msg_and_die("munmap failed: %s", entry->path);
+ }
++ entry->uncompressed=NULL;
+ close(entry->fd);
+ }
+ }
+@@ -204,7 +348,8 @@
+ find_identical_file(orig->next, newfile));
+ }
+
+-static void eliminate_doubles(struct entry *root, struct entry *orig) {
++static void eliminate_doubles(struct entry *root, struct entry *orig)
++{
+ if (orig) {
+ if (orig->size && (orig->path || orig->uncompressed))
+ find_identical_file(root, orig);
+@@ -232,10 +377,7 @@
+
+ /* Set up the path. */
+ /* TODO: Reuse the parent's buffer to save memcpy'ing and duplication. */
+- path = malloc(len + 1 + MAX_INPUT_NAMELEN + 1);
+- if (!path) {
+- die(MKFS_ERROR, 1, "malloc failed");
+- }
++ path = xmalloc(len + 1 + MAX_INPUT_NAMELEN + 1);
+ memcpy(path, name, len);
+ endpath = path + len;
+ *endpath = '/';
+@@ -245,7 +387,7 @@
+ dircount = scandir(name, &dirlist, 0, cramsort);
+
+ if (dircount < 0) {
+- die(MKFS_ERROR, 1, "scandir failed: %s", name);
++ error_msg_and_die("scandir failed: %s", name);
+ }
+
+ /* process directory */
+@@ -269,25 +411,20 @@
+ }
+ namelen = strlen(dirent->d_name);
+ if (namelen > MAX_INPUT_NAMELEN) {
+- die(MKFS_ERROR, 0,
+- "very long (%u bytes) filename found: %s\n"
+- "please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile",
++ error_msg_and_die(
++ "Very long (%u bytes) filename `%s' found.\n"
++ " Please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile. Exiting.\n",
+ namelen, dirent->d_name);
+ }
+ memcpy(endpath, dirent->d_name, namelen + 1);
+
+ if (lstat(path, &st) < 0) {
++ perror(endpath);
+ warn_skip = 1;
+ continue;
+ }
+- entry = calloc(1, sizeof(struct entry));
+- if (!entry) {
+- die(MKFS_ERROR, 1, "calloc failed");
+- }
+- entry->name = strdup(dirent->d_name);
+- if (!entry->name) {
+- die(MKFS_ERROR, 1, "strdup failed");
+- }
++ entry = xcalloc(1, sizeof(struct entry));
++ entry->name = xstrdup(dirent->d_name);
+ /* truncate multi-byte UTF-8 filenames on character boundary */
+ if (namelen > CRAMFS_MAXPATHLEN) {
+ namelen = CRAMFS_MAXPATHLEN;
+@@ -297,24 +434,25 @@
+ namelen--;
+ /* are we reasonably certain it was UTF-8 ? */
+ if (entry->name[namelen] < 0x80 || !namelen) {
+- die(MKFS_ERROR, 0, "cannot truncate filenames not encoded in UTF-8");
++ error_msg_and_die("cannot truncate filenames not encoded in UTF-8");
+ }
+ }
+ entry->name[namelen] = '\0';
+ }
+ entry->mode = st.st_mode;
+ entry->size = st.st_size;
+- entry->uid = st.st_uid;
++ entry->uid = opt_squash ? 0 : st.st_uid;
+ if (entry->uid >= 1 << CRAMFS_UID_WIDTH)
+ warn_uid = 1;
+- entry->gid = st.st_gid;
+- if (entry->gid >= 1 << CRAMFS_GID_WIDTH)
++ entry->gid = opt_squash ? 0 : st.st_gid;
++ if (entry->gid >= 1 << CRAMFS_GID_WIDTH) {
+ /* TODO: We ought to replace with a default
+ gid instead of truncating; otherwise there
+ are security problems. Maybe mode should
+ be &= ~070. Same goes for uid once Linux
+ supports >16-bit uids. */
+ warn_gid = 1;
++ }
+ size = sizeof(struct cramfs_inode) + ((namelen + 3) & ~3);
+ *fslen_ub += size;
+ if (S_ISDIR(st.st_mode)) {
+@@ -325,21 +463,15 @@
+ warn_skip = 1;
+ continue;
+ }
+- entry->path = strdup(path);
+- if (!entry->path) {
+- die(MKFS_ERROR, 1, "strdup failed");
+- }
++ entry->path = xstrdup(path);
+ if ((entry->size >= 1 << CRAMFS_SIZE_WIDTH)) {
+ warn_size = 1;
+ entry->size = (1 << CRAMFS_SIZE_WIDTH) - 1;
+ }
+ }
+ } else if (S_ISLNK(st.st_mode)) {
+- entry->uncompressed = malloc(entry->size);
++ entry->uncompressed = xreadlink(path);
+ if (!entry->uncompressed) {
+- die(MKFS_ERROR, 1, "malloc failed");
+- }
+- if (readlink(path, entry->uncompressed, entry->size) < 0) {
+ warn_skip = 1;
+ continue;
+ }
+@@ -351,7 +483,7 @@
+ if (entry->size & -(1<<CRAMFS_SIZE_WIDTH))
+ warn_dev = 1;
+ } else {
+- die(MKFS_ERROR, 0, "bogus file type: %s", entry->name);
++ error_msg_and_die("bogus file type: %s", entry->name);
+ }
+
+ if (S_ISREG(st.st_mode) || S_ISLNK(st.st_mode)) {
+@@ -378,7 +510,9 @@
+ struct cramfs_super *super = (struct cramfs_super *) base;
+ unsigned int offset = sizeof(struct cramfs_super) + image_length;
+
+- offset += opt_pad; /* 0 if no padding */
++ if (opt_pad) {
++ offset += opt_pad; /* 0 if no padding */
++ }
+
+ super->magic = CRAMFS_MAGIC;
+ super->flags = CRAMFS_FLAG_FSID_VERSION_2 | CRAMFS_FLAG_SORTED_DIRS;
+@@ -414,10 +548,10 @@
+ struct cramfs_inode *inode = (struct cramfs_inode *) (base + entry->dir_offset);
+
+ if ((offset & 3) != 0) {
+- die(MKFS_ERROR, 0, "illegal offset of %lu bytes", offset);
++ error_msg_and_die("illegal offset of %lu bytes", offset);
+ }
+ if (offset >= (1 << (2 + CRAMFS_OFFSET_WIDTH))) {
+- die(MKFS_ERROR, 0, "filesystem too big");
++ error_msg_and_die("filesystem too big");
+ }
+ inode->offset = (offset >> 2);
+ }
+@@ -429,7 +563,7 @@
+ */
+ static void print_node(struct entry *e)
+ {
+- char info[10];
++ char info[12];
+ char type = '?';
+
+ if (S_ISREG(e->mode)) type = 'f';
+@@ -442,11 +576,11 @@
+
+ if (S_ISCHR(e->mode) || (S_ISBLK(e->mode))) {
+ /* major/minor numbers can be as high as 2^12 or 4096 */
+- snprintf(info, 10, "%4d,%4d", major(e->size), minor(e->size));
++ snprintf(info, 11, "%4d,%4d", major(e->size), minor(e->size));
+ }
+ else {
+ /* size be as high as 2^24 or 16777216 */
+- snprintf(info, 10, "%9d", e->size);
++ snprintf(info, 11, "%9d", e->size);
+ }
+
+ printf("%c %04o %s %5d:%-3d %s\n",
+@@ -462,17 +596,9 @@
+ {
+ int stack_entries = 0;
+ int stack_size = 64;
+- struct entry **entry_stack;
+-
+- entry_stack = malloc(stack_size * sizeof(struct entry *));
+- if (!entry_stack) {
+- die(MKFS_ERROR, 1, "malloc failed");
+- }
+-
+- if (opt_verbose) {
+- printf("root:\n");
+- }
++ struct entry **entry_stack = NULL;
+
++ entry_stack = xmalloc(stack_size * sizeof(struct entry *));
+ for (;;) {
+ int dir_start = stack_entries;
+ while (entry) {
+@@ -506,10 +632,7 @@
+ if (entry->child) {
+ if (stack_entries >= stack_size) {
+ stack_size *= 2;
+- entry_stack = realloc(entry_stack, stack_size * sizeof(struct entry *));
+- if (!entry_stack) {
+- die(MKFS_ERROR, 1, "realloc failed");
+- }
++ entry_stack = xrealloc(entry_stack, stack_size * sizeof(struct entry *));
+ }
+ entry_stack[stack_entries] = entry;
+ stack_entries++;
+@@ -543,7 +666,7 @@
+
+ set_data_offset(entry, base, offset);
+ if (opt_verbose) {
+- printf("%s:\n", entry->name);
++ printf("'%s':\n", entry->name);
+ }
+ entry = entry->child;
+ }
+@@ -553,16 +676,21 @@
+
+ static int is_zero(char const *begin, unsigned len)
+ {
+- /* Returns non-zero iff the first LEN bytes from BEGIN are all NULs. */
+- return (len-- == 0 ||
+- (begin[0] == '\0' &&
+- (len-- == 0 ||
+- (begin[1] == '\0' &&
+- (len-- == 0 ||
+- (begin[2] == '\0' &&
+- (len-- == 0 ||
+- (begin[3] == '\0' &&
+- memcmp(begin, begin + 4, len) == 0))))))));
++ if (opt_holes)
++ /* Returns non-zero iff the first LEN bytes from BEGIN are
++ all NULs. */
++ return (len-- == 0 ||
++ (begin[0] == '\0' &&
++ (len-- == 0 ||
++ (begin[1] == '\0' &&
++ (len-- == 0 ||
++ (begin[2] == '\0' &&
++ (len-- == 0 ||
++ (begin[3] == '\0' &&
++ memcmp(begin, begin + 4, len) == 0))))))));
++ else
++ /* Never create holes. */
++ return 0;
+ }
+
+ /*
+@@ -575,37 +703,34 @@
+ * Note that size > 0, as a zero-sized file wouldn't ever
+ * have gotten here in the first place.
+ */
+-static unsigned int do_compress(char *base, unsigned int offset, char const *name, char *uncompressed, unsigned int size)
++static unsigned int do_compress(char *base, unsigned int offset, struct entry *entry)
+ {
++ unsigned int size = entry->size;
+ unsigned long original_size = size;
+ unsigned long original_offset = offset;
+ unsigned long new_size;
+ unsigned long blocks = (size - 1) / blksize + 1;
+ unsigned long curr = offset + 4 * blocks;
+ int change;
++ char *uncompressed = entry->uncompressed;
+
+- total_blocks += blocks;
++ total_blocks += blocks;
+
+ do {
+ unsigned long len = 2 * blksize;
+ unsigned int input = size;
+- int err;
+-
+ if (input > blksize)
+ input = blksize;
+ size -= input;
+- if (!(opt_holes && is_zero (uncompressed, input))) {
+- err = compress2(base + curr, &len, uncompressed, input, Z_BEST_COMPRESSION);
+- if (err != Z_OK) {
+- die(MKFS_ERROR, 0, "compression error: %s", zError(err));
+- }
++ if (!is_zero (uncompressed, input)) {
++ compress(base + curr, &len, uncompressed, input);
+ curr += len;
+ }
+ uncompressed += input;
+
+ if (len > blksize*2) {
+ /* (I don't think this can happen with zlib.) */
+- die(MKFS_ERROR, 0, "AIEEE: block \"compressed\" to > 2*blocklength (%ld)", len);
++ error_msg_and_die("AIEEE: block \"compressed\" to > 2*blocklength (%ld)\n", len);
+ }
+
+ *(u32 *) (base + offset) = curr;
+@@ -618,10 +743,12 @@
+ st_blocks * 512. But if you say that then perhaps
+ administrative data should also be included in both. */
+ change = new_size - original_size;
+- if (opt_verbose > 1) {
+- printf("%6.2f%% (%+d bytes)\t%s\n",
+- (change * 100) / (double) original_size, change, name);
++#if 0
++ if (opt_verbose) {
++ printf("%6.2f%% (%+d bytes)\t%s\n",
++ (change * 100) / (double) original_size, change, entry->name);
+ }
++#endif
+
+ return curr;
+ }
+@@ -644,7 +771,7 @@
+ set_data_offset(entry, base, offset);
+ entry->offset = offset;
+ map_entry(entry);
+- offset = do_compress(base, offset, entry->name, entry->uncompressed, entry->size);
++ offset = do_compress(base, offset, entry);
+ unmap_entry(entry);
+ }
+ }
+@@ -660,13 +787,10 @@
+ int fd;
+ char *buf;
+
+- fd = open(file, O_RDONLY);
+- if (fd < 0) {
+- die(MKFS_ERROR, 1, "open failed: %s", file);
+- }
++ fd = xopen(file, O_RDONLY, 0);
+ buf = mmap(NULL, image_length, PROT_READ, MAP_PRIVATE, fd, 0);
+ if (buf == MAP_FAILED) {
+- die(MKFS_ERROR, 1, "mmap failed");
++ error_msg_and_die("mmap failed");
+ }
+ memcpy(base + offset, buf, image_length);
+ munmap(buf, image_length);
+@@ -679,6 +803,328 @@
+ return (offset + image_length);
+ }
+
++static struct entry *find_filesystem_entry(struct entry *dir, char *name, mode_t type)
++{
++ struct entry *e = dir;
++
++ if (S_ISDIR(dir->mode)) {
++ e = dir->child;
++ }
++ while (e) {
++ /* Only bother to do the expensive strcmp on matching file types */
++ if (type == (e->mode & S_IFMT) && e->name) {
++ if (S_ISDIR(e->mode)) {
++ int len = strlen(e->name);
++
++ /* Check if we are a parent of the correct path */
++ if (strncmp(e->name, name, len) == 0) {
++ /* Is this an _exact_ match? */
++ if (strcmp(name, e->name) == 0) {
++ return (e);
++ }
++ /* Looks like we found a parent of the correct path */
++ if (name[len] == '/') {
++ if (e->child) {
++ return (find_filesystem_entry (e, name + len + 1, type));
++ } else {
++ return NULL;
++ }
++ }
++ }
++ } else {
++ if (strcmp(name, e->name) == 0) {
++ return (e);
++ }
++ }
++ }
++ e = e->next;
++ }
++ return (NULL);
++}
++
++void modify_entry(char *full_path, unsigned long uid, unsigned long gid,
++ unsigned long mode, unsigned long rdev, struct entry *root, loff_t *fslen_ub)
++{
++ char *name, *path, *full;
++ struct entry *curr, *parent, *entry, *prev;
++
++ full = xstrdup(full_path);
++ path = xstrdup(dirname(full));
++ name = full_path + strlen(path) + 1;
++ free(full);
++ if (strcmp(path, "/") == 0) {
++ parent = root;
++ name = full_path + 1;
++ } else {
++ if (!(parent = find_filesystem_entry(root, path+1, S_IFDIR)))
++ error_msg_and_die("%s/%s: could not find parent\n", path, name);
++ }
++ if ((entry = find_filesystem_entry(parent, name, (mode & S_IFMT)))) {
++ /* its there, just modify permissions */
++ entry->mode = mode;
++ entry->uid = uid;
++ entry->gid = gid;
++ } else { /* make a new entry */
++
++ /* code partially replicated from parse_directory() */
++ size_t namelen;
++ if (S_ISREG(mode)) {
++ error_msg_and_die("%s: regular file from device_table file must exist on disk!", full_path);
++ }
++
++ namelen = strlen(name);
++ if (namelen > MAX_INPUT_NAMELEN) {
++ error_msg_and_die(
++ "Very long (%u bytes) filename `%s' found.\n"
++ " Please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile. Exiting.\n",
++ namelen, name);
++ }
++ entry = xcalloc(1, sizeof(struct entry));
++ entry->name = xstrdup(name);
++ /* truncate multi-byte UTF-8 filenames on character boundary */
++ if (namelen > CRAMFS_MAXPATHLEN) {
++ namelen = CRAMFS_MAXPATHLEN;
++ warn_namelen = 1;
++ /* the first lost byte must not be a trail byte */
++ while ((entry->name[namelen] & 0xc0) == 0x80) {
++ namelen--;
++ /* are we reasonably certain it was UTF-8 ? */
++ if (entry->name[namelen] < 0x80 || !namelen) {
++ error_msg_and_die("cannot truncate filenames not encoded in UTF-8");
++ }
++ }
++ entry->name[namelen] = '\0';
++ }
++ entry->mode = mode;
++ entry->uid = uid;
++ entry->gid = gid;
++ entry->size = 0;
++ if (S_ISBLK(mode) || S_ISCHR(mode)) {
++ entry->size = rdev;
++ if (entry->size & -(1<<CRAMFS_SIZE_WIDTH))
++ warn_dev = 1;
++ }
++
++ /* ok, now we have to backup and correct the size of all the entries above us */
++ *fslen_ub += sizeof(struct cramfs_inode) + ((namelen + 3) & ~3);
++ parent->size += sizeof(struct cramfs_inode) + ((namelen + 3) & ~3);
++
++ /* alright, time to link us in */
++ curr = parent->child;
++ prev = NULL;
++ while (curr && strcmp(name, curr->name) > 0) {
++ prev = curr;
++ curr = curr->next;
++ }
++ if (!prev) parent->child = entry;
++ else prev->next = entry;
++ entry->next = curr;
++ entry->child = NULL;
++ }
++ if (entry->uid >= 1 << CRAMFS_UID_WIDTH)
++ warn_uid = 1;
++ if (entry->gid >= 1 << CRAMFS_GID_WIDTH) {
++ /* TODO: We ought to replace with a default
++ gid instead of truncating; otherwise there
++ are security problems. Maybe mode should
++ be &= ~070. Same goes for uid once Linux
++ supports >16-bit uids. */
++ warn_gid = 1;
++ }
++ free(path);
++}
++
++/* the GNU C library has a wonderful scanf("%as", string) which will
++ allocate the string with the right size, good to avoid buffer overruns.
++ the following macros use it if available or use a hacky workaround...
++ */
++
++#ifdef __GNUC__
++#define SCANF_PREFIX "a"
++#define SCANF_STRING(s) (&s)
++#define GETCWD_SIZE 0
++#else
++#define SCANF_PREFIX "511"
++#define SCANF_STRING(s) (s = xmalloc(512))
++#define GETCWD_SIZE -1
++inline int snprintf(char *str, size_t n, const char *fmt, ...)
++{
++ int ret;
++ va_list ap;
++
++ va_start(ap, fmt);
++ ret = vsprintf(str, fmt, ap);
++ va_end(ap);
++ return ret;
++}
++#endif
++
++/* device table entries take the form of:
++ <path> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
++ /dev/mem c 640 0 0 1 1 0 0 -
++
++ type can be one of:
++ f A regular file
++ d Directory
++ c Character special device file
++ b Block special device file
++ p Fifo (named pipe)
++
++ I don't bother with symlinks (permissions are irrelevant), hard
++ links (special cases of regular files), or sockets (why bother).
++
++ Regular files must exist in the target root directory. If a char,
++ block, fifo, or directory does not exist, it will be created.
++*/
++
++static int interpret_table_entry(char *line, struct entry *root, loff_t *fslen_ub)
++{
++ char type, *name = NULL;
++ unsigned long mode = 0755, uid = 0, gid = 0, major = 0, minor = 0;
++ unsigned long start = 0, increment = 1, count = 0;
++
++ if (sscanf (line, "%" SCANF_PREFIX "s %c %lo %lu %lu %lu %lu %lu %lu %lu",
++ SCANF_STRING(name), &type, &mode, &uid, &gid, &major, &minor,
++ &start, &increment, &count) < 0)
++ {
++ return 1;
++ }
++
++ if (!strcmp(name, "/")) {
++ error_msg_and_die("Device table entries require absolute paths");
++ }
++
++ switch (type) {
++ case 'd':
++ mode |= S_IFDIR;
++ modify_entry(name, uid, gid, mode, 0, root, fslen_ub);
++ break;
++ case 'f':
++ mode |= S_IFREG;
++ modify_entry(name, uid, gid, mode, 0, root, fslen_ub);
++ break;
++ case 'p':
++ mode |= S_IFIFO;
++ modify_entry(name, uid, gid, mode, 0, root, fslen_ub);
++ break;
++ case 'c':
++ case 'b':
++ mode |= (type == 'c') ? S_IFCHR : S_IFBLK;
++ if (count > 0) {
++ char *buf;
++ unsigned long i;
++ dev_t rdev;
++
++ for (i = start; i < count; i++) {
++ asprintf(&buf, "%s%lu", name, i);
++ rdev = makedev(major, minor + (i * increment - start));
++ modify_entry(buf, uid, gid, mode, rdev, root, fslen_ub);
++ free(buf);
++ }
++ } else {
++ dev_t rdev = makedev(major, minor);
++ modify_entry(name, uid, gid, mode, rdev, root, fslen_ub);
++ }
++ break;
++ default:
++ error_msg_and_die("Unsupported file type");
++ }
++ free(name);
++ return 0;
++}
++
++static int parse_device_table(FILE *file, struct entry *root, loff_t *fslen_ub)
++{
++ char *line;
++ int status = 0;
++ size_t length = 0;
++
++ /* Turn off squash, since we must ensure that values
++ * entered via the device table are not squashed */
++ opt_squash = 0;
++
++ /* Looks ok so far. The general plan now is to read in one
++ * line@a time, check for leading comment delimiters ('#'),
++ * then try and parse the line as a device table. If we fail
++ * to parse things, try and help the poor fool to fix their
++ * device table with a useful error msg... */
++ line = NULL;
++ while (getline(&line, &length, file) != -1) {
++ /* First trim off any whitespace */
++ int len = strlen(line);
++
++ /* trim trailing whitespace */
++ while (len > 0 && isspace(line[len - 1]))
++ line[--len] = '\0';
++ /* trim leading whitespace */
++ memmove(line, &line[strspn(line, " \n\r\t\v")], len);
++
++ /* How long are we after trimming? */
++ len = strlen(line);
++
++ /* If this is NOT a comment line, try to interpret it */
++ if (len && *line != '#') {
++ if (interpret_table_entry(line, root, fslen_ub))
++ status = 1;
++ }
++
++ free(line);
++ line = NULL;
++ }
++ free(line);
++ fclose(file);
++
++ return status;
++}
++
++void traverse(struct entry *entry, int depth)
++{
++ struct entry *curr = entry;
++ int i;
++
++ while (curr) {
++ for (i = 0; i < depth; i++) putchar(' ');
++ printf("%s: size=%d mode=%d same=%p\n",
++ (curr->name)? (char*)curr->name : "/",
++ curr->size, curr->mode, curr->same);
++ if (curr->child) traverse(curr->child, depth + 4);
++ curr = curr->next;
++ }
++}
++
++static void free_filesystem_entry(struct entry *dir)
++{
++ struct entry *e = dir, *last;
++
++ if (S_ISDIR(dir->mode)) {
++ e = dir->child;
++ }
++ while (e) {
++ if (e->name)
++ free(e->name);
++ if (e->path)
++ free(e->path);
++ if (e->uncompressed)
++ free(e->uncompressed);
++ last = e;
++ if (e->child) {
++ free_filesystem_entry(e);
++ }
++ e = e->next;
++ free(last);
++ }
++}
++
++
++/*
++ * Usage:
++ *
++ * mkcramfs directory-name outfile
++ *
++ * where "directory-name" is simply the root of the directory
++ * tree that we want to generate a compressed filesystem out
++ * of.
++ */
+ int main(int argc, char **argv)
+ {
+ struct stat st; /* used twice... */
+@@ -692,6 +1138,7 @@
+ u32 crc;
+ int c; /* for getopt */
+ char *ep; /* for strtoul */
++ FILE *devtable = NULL;
+
+ total_blocks = 0;
+
+@@ -699,7 +1146,7 @@
+ progname = argv[0];
+
+ /* command line options */
+- while ((c = getopt(argc, argv, "hEe:i:n:psvz")) != EOF) {
++ while ((c = getopt(argc, argv, "hEe:i:n:psvzD:q")) != EOF) {
+ switch (c) {
+ case 'h':
+ usage(MKFS_OK);
+@@ -715,7 +1162,7 @@
+ case 'i':
+ opt_image = optarg;
+ if (lstat(opt_image, &st) < 0) {
+- die(MKFS_ERROR, 1, "lstat failed: %s", opt_image);
++ error_msg_and_die("lstat failed: %s", opt_image);
+ }
+ image_length = st.st_size; /* may be padded later */
+ fslen_ub += (image_length + 3); /* 3 is for padding */
+@@ -736,6 +1183,16 @@
+ case 'z':
+ opt_holes = 1;
+ break;
++ case 'q':
++ opt_squash = 1;
++ break;
++ case 'D':
++ devtable = xfopen(optarg, "r");
++ if (fstat(fileno(devtable), &st) < 0)
++ perror_msg_and_die(optarg);
++ if (st.st_size < 10)
++ error_msg_and_die("%s: not a proper device table file\n", optarg);
++ break;
+ }
+ }
+
+@@ -745,25 +1202,23 @@
+ outfile = argv[optind + 1];
+
+ if (stat(dirname, &st) < 0) {
+- die(MKFS_USAGE, 1, "stat failed: %s", dirname);
+- }
+- fd = open(outfile, O_WRONLY | O_CREAT | O_TRUNC, 0666);
+- if (fd < 0) {
+- die(MKFS_USAGE, 1, "open failed: %s", outfile);
++ error_msg_and_die("stat failed: %s", dirname);
+ }
++ fd = xopen(outfile, O_WRONLY | O_CREAT | O_TRUNC, 0666);
+
+- root_entry = calloc(1, sizeof(struct entry));
+- if (!root_entry) {
+- die(MKFS_ERROR, 1, "calloc failed");
+- }
++ root_entry = xcalloc(1, sizeof(struct entry));
+ root_entry->mode = st.st_mode;
+ root_entry->uid = st.st_uid;
+ root_entry->gid = st.st_gid;
+
+ root_entry->size = parse_directory(root_entry, dirname, &root_entry->child, &fslen_ub);
+
++ if (devtable) {
++ parse_device_table(devtable, root_entry, &fslen_ub);
++ }
++
+ /* always allocate a multiple of blksize bytes because that's
+- what we're going to write later on */
++ what we're going to write later on */
+ fslen_ub = ((fslen_ub - 1) | (blksize - 1)) + 1;
+
+ if (fslen_ub > MAXFSLEN) {
+@@ -790,7 +1245,7 @@
+ rom_image = mmap(NULL, fslen_ub?fslen_ub:1, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+
+ if (rom_image == MAP_FAILED) {
+- die(MKFS_ERROR, 1, "mmap failed");
++ error_msg_and_die("mmap failed");
+ }
+
+ /* Skip the first opt_pad bytes for boot loader code */
+@@ -807,6 +1262,7 @@
+ }
+
+ offset = write_directory_structure(root_entry->child, rom_image, offset);
++ if (opt_verbose)
+ printf("Directory data: %d bytes\n", offset);
+
+ offset = write_data(root_entry, rom_image, offset);
+@@ -814,30 +1270,38 @@
+ /* We always write a multiple of blksize bytes, so that
+ losetup works. */
+ offset = ((offset - 1) | (blksize - 1)) + 1;
++ if (opt_verbose)
+ printf("Everything: %d kilobytes\n", offset >> 10);
+
+ /* Write the superblock now that we can fill in all of the fields. */
+ write_superblock(root_entry, rom_image+opt_pad, offset);
++ if (opt_verbose)
+ printf("Super block: %d bytes\n", sizeof(struct cramfs_super));
+
+ /* Put the checksum in. */
+ crc = crc32(0L, Z_NULL, 0);
+ crc = crc32(crc, (rom_image+opt_pad), (offset-opt_pad));
+ ((struct cramfs_super *) (rom_image+opt_pad))->fsid.crc = crc;
++ if (opt_verbose)
+ printf("CRC: %x\n", crc);
+
+ /* Check to make sure we allocated enough space. */
+ if (fslen_ub < offset) {
+- die(MKFS_ERROR, 0, "not enough space allocated for ROM image (%Ld allocated, %d used)", fslen_ub, offset);
++ error_msg_and_die("not enough space allocated for ROM "
++ "image (%Ld allocated, %d used)", fslen_ub, offset);
+ }
+
+ written = write(fd, rom_image, offset);
+ if (written < 0) {
+- die(MKFS_ERROR, 1, "write failed");
++ error_msg_and_die("write failed");
+ }
+ if (offset != written) {
+- die(MKFS_ERROR, 0, "ROM image write failed (wrote %d of %d bytes)", written, offset);
++ error_msg_and_die("ROM image write failed (wrote %d of %d bytes)", written, offset);
+ }
++
++ /* Free up memory */
++ free_filesystem_entry(root_entry);
++ free(root_entry);
+
+ /* (These warnings used to come@the start, but they scroll off the
+ screen too quickly.) */
diff --git a/package/cramfs/cramfs-02-endian.patch b/package/cramfs/cramfs-02-endian.patch
new file mode 100644
index 0000000..0da55bf
--- /dev/null
+++ b/package/cramfs/cramfs-02-endian.patch
@@ -0,0 +1,284 @@
+--- cramfs-1.1/mkcramfs.c.orig 2005-04-13 05:55:57.000000000 -0600
++++ cramfs-1.1/mkcramfs.c 2005-04-13 16:19:57.000000000 -0600
+@@ -117,6 +117,7 @@
+ static int opt_squash = 0;
+ static char *opt_image = NULL;
+ static char *opt_name = NULL;
++static int swap_endian = 0;
+
+ static int warn_dev, warn_gid, warn_namelen, warn_skip, warn_size, warn_uid;
+ static const char *const memory_exhausted = "memory exhausted";
+@@ -155,6 +156,8 @@
+ " -i file insert a file image into the filesystem (requires >= 2.4.0)\n"
+ " -n name set name of cramfs filesystem\n"
+ " -p pad by %d bytes for boot code\n"
++ " -l litte endian filesystem\n"
++ " -b big endian filesystem\n"
+ " -s sort directory entries (old option, ignored)\n"
+ " -v be more verbose\n"
+ " -z make explicit holes (requires >= 2.3.39)\n"
+@@ -504,6 +506,50 @@
+ return totalsize;
+ }
+
++/* routines to swap endianness/bitfields in inode/superblock block data */
++static void fix_inode(struct cramfs_inode *inode)
++{
++#define wswap(x) (((x)>>24) | (((x)>>8)&0xff00) | (((x)&0xff00)<<8) | (((x)&0xff)<<24))
++ /* attempt #2 */
++ inode->mode = (inode->mode >> 8) | ((inode->mode&0xff)<<8);
++ inode->uid = (inode->uid >> 8) | ((inode->uid&0xff)<<8);
++ inode->size = (inode->size >> 16) | (inode->size&0xff00) |
++ ((inode->size&0xff)<<16);
++ ((u32*)inode)[2] = wswap(inode->offset | (inode->namelen<<26));
++}
++
++static void fix_offset(struct cramfs_inode *inode, u32 offset)
++{
++ u32 tmp = wswap(((u32*)inode)[2]);
++ ((u32*)inode)[2] = wswap((offset >> 2) | (tmp&0xfc000000));
++}
++
++static void fix_block_pointer(u32 *p)
++{
++ *p = wswap(*p);
++}
++
++static void fix_super(struct cramfs_super *super)
++{
++ u32 *p = (u32*)super;
++
++ /* fix superblock fields */
++ p[0] = wswap(p[0]); /* magic */
++ p[1] = wswap(p[1]); /* size */
++ p[2] = wswap(p[2]); /* flags */
++ p[3] = wswap(p[3]); /* future */
++
++ /* fix filesystem info fields */
++ p = (u32*)&super->fsid;
++ p[0] = wswap(p[0]); /* crc */
++ p[1] = wswap(p[1]); /* edition */
++ p[2] = wswap(p[2]); /* blocks */
++ p[3] = wswap(p[3]); /* files */
++
++ fix_inode(&super->root);
++#undef wswap
++}
++
+ /* Returns sizeof(struct cramfs_super), which includes the root inode. */
+ static unsigned int write_superblock(struct entry *root, char *base, int size)
+ {
+@@ -539,6 +585,7 @@
+ super->root.gid = root->gid;
+ super->root.size = root->size;
+ super->root.offset = offset >> 2;
++ if (swap_endian) fix_super(super);
+
+ return offset;
+ }
+@@ -553,7 +600,10 @@
+ if (offset >= (1 << (2 + CRAMFS_OFFSET_WIDTH))) {
+ error_msg_and_die("filesystem too big");
+ }
+- inode->offset = (offset >> 2);
++ if (swap_endian)
++ fix_offset(inode, offset);
++ else
++ inode->offset = (offset >> 2);
+ }
+
+ /*
+@@ -638,6 +688,7 @@
+ stack_entries++;
+ }
+ entry = entry->next;
++ if (swap_endian) fix_inode(inode);
+ }
+
+ /*
+@@ -734,6 +785,7 @@
+ }
+
+ *(u32 *) (base + offset) = curr;
++ if (swap_endian) fix_block_pointer((u32*)(base + offset));
+ offset += 4;
+ } while (size);
+
+@@ -1146,7 +1198,7 @@
+ progname = argv[0];
+
+ /* command line options */
+- while ((c = getopt(argc, argv, "hEe:i:n:psvzD:q")) != EOF) {
++ while ((c = getopt(argc, argv, "hEe:i:n:psvzD:qlb")) != EOF) {
+ switch (c) {
+ case 'h':
+ usage(MKFS_OK);
+@@ -1174,6 +1227,18 @@
+ opt_pad = PAD_SIZE;
+ fslen_ub += PAD_SIZE;
+ break;
++ case 'b':
++#if __BYTE_ORDER == __LITTLE_ENDIAN
++ swap_endian = 1;
++ printf("Swapping filesystem endian-ness\n");
++#endif
++ break;
++ case 'l':
++#if __BYTE_ORDER == __BIG_ENDIAN
++ swap_endian = 1;
++ printf("Swapping filesystem endian-ness\n");
++#endif
++ break;
+ case 's':
+ /* old option, ignored */
+ break;
+--- cramfs-1.1/cramfsck.c.orig 2005-04-25 11:50:31.000000000 -0700
++++ cramfs-1.1/cramfsck.c 2005-04-25 16:53:25.000000000 -0700
+@@ -30,6 +30,7 @@
+ * 2000/07/15: Daniel Quinlan (initial support for block devices)
+ * 2002/01/10: Daniel Quinlan (additional checks, test more return codes,
+ * use read if mmap fails, standardize messages)
++ * 2004/09/01: Alfonso Acosta (Add swapping support)
+ */
+
+ /* compile-time options */
+@@ -51,6 +52,7 @@
+ #include <utime.h>
+ #include <sys/ioctl.h>
+ #define _LINUX_STRING_H_
++#include <byteswap.h>
+ #include "linux/cramfs_fs.h"
+ #include <zlib.h>
+
+@@ -74,6 +76,7 @@
+ static char *filename; /* ROM image filename */
+ struct cramfs_super super; /* just find the cramfs superblock once */
+ static int opt_verbose = 0; /* 1 = verbose (-v), 2+ = very verbose (-vv) */
++static int need_swapping = 0; /* fs and host dont have the same endianness */
+ #ifdef INCLUDE_FS_TESTS
+ static int opt_extract = 0; /* extract cramfs (-x) */
+ static char *extract_dir = "/"; /* extraction directory (-x) */
+@@ -85,6 +88,9 @@
+ static unsigned long start_data = ~0UL; /* start of the data (256 MB = max) */
+ static unsigned long end_data = 0; /* end of the data */
+
++/* access 32 byte variables */
++#define CRAMFS_32(x) (need_swapping ? bswap_32(x) : x)
++
+ /* Guarantee access to at least 8kB at a time */
+ #define ROMBUFFER_BITS 13
+ #define ROMBUFFERSIZE (1 << ROMBUFFER_BITS)
+@@ -166,20 +172,34 @@
+ if (super.magic == CRAMFS_MAGIC) {
+ *start = 0;
+ }
++ else if (super.magic == bswap_32(CRAMFS_MAGIC)) {
++ *start = 0;
++ need_swapping = 1;
++ }
++
+ else if (*length >= (PAD_SIZE + sizeof(super))) {
+ lseek(fd, PAD_SIZE, SEEK_SET);
+ if (read(fd, &super, sizeof(super)) != sizeof(super)) {
+ die(FSCK_ERROR, 1, "read failed: %s", filename);
+ }
+- if (super.magic == CRAMFS_MAGIC) {
++ if (super.magic == CRAMFS_32(CRAMFS_MAGIC)) {
+ *start = PAD_SIZE;
+ }
+ }
+
+ /* superblock tests */
+- if (super.magic != CRAMFS_MAGIC) {
++ if (super.magic != CRAMFS_32(CRAMFS_MAGIC)) {
+ die(FSCK_UNCORRECTED, 0, "superblock magic not found");
+ }
++ if (need_swapping){
++ super.size = bswap_32(super.size);
++ super.flags = bswap_32(super.flags);
++ super.future = bswap_32(super.future);
++ super.fsid.crc = bswap_32(super.fsid.crc);
++ super.fsid.edition = bswap_32(super.fsid.edition);
++ super.fsid.blocks = bswap_32(super.fsid.blocks);
++ super.fsid.files = bswap_32(super.fsid.files);
++ }
+ if (super.flags & ~CRAMFS_SUPPORTED_FLAGS) {
+ die(FSCK_ERROR, 0, "unsupported filesystem features");
+ }
+@@ -215,7 +235,10 @@
+ die(FSCK_USAGE, 0, "unable to test CRC: old cramfs format");
+ #endif /* not INCLUDE_FS_TESTS */
+ }
+-
++ else if (need_swapping) {
++ /* crc checking in this case would mean translating the whole file */
++ return;
++ }
+ crc = crc32(0L, Z_NULL, 0);
+
+ buf = mmap(NULL, super.size, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0);
+@@ -300,12 +323,23 @@
+
+ static struct cramfs_inode *cramfs_iget(struct cramfs_inode * i)
+ {
++#define wswap(x) (((x)>>24) | (((x)>>8)&0xff00) | (((x)&0xff00)<<8) | (((x)&0xff)<<24))
+ struct cramfs_inode *inode = malloc(sizeof(struct cramfs_inode));
+
+ if (!inode) {
+ die(FSCK_ERROR, 1, "malloc failed");
+ }
+- *inode = *i;
++ if(!need_swapping) {
++ *inode = *i;
++ }
++ else {
++ inode->mode=bswap_16(i->mode);
++ inode->uid=bswap_16(i->uid);
++ inode->size=bswap_32(i->size << 8);
++ inode->gid=i->gid;
++ inode->namelen = bswap_32(((u32*)i)[2]) >> 26;
++ inode->offset = bswap_32(((u32*)i)[2]) & 0x3FFFFFFF;
++ }
+ return inode;
+ }
+
+@@ -324,9 +358,9 @@
+ */
+ static struct cramfs_inode *read_super(void)
+ {
+- unsigned long offset = super.root.offset << 2;
+-
+- if (!S_ISDIR(super.root.mode))
++ struct cramfs_inode *root = cramfs_iget(&super.root);
++ unsigned long offset = root->offset << 2;
++ if (!S_ISDIR(root->mode))
+ die(FSCK_UNCORRECTED, 0, "root inode is not directory");
+ if (!(super.flags & CRAMFS_FLAG_SHIFTED_ROOT_OFFSET) &&
+ ((offset != sizeof(struct cramfs_super)) &&
+@@ -334,7 +368,7 @@
+ {
+ die(FSCK_UNCORRECTED, 0, "bad root offset (%lu)", offset);
+ }
+- return cramfs_iget(&super.root);
++ return root;
+ }
+
+ static int uncompress_block(void *src, int len)
+@@ -366,7 +400,7 @@
+
+ do {
+ unsigned long out = PAGE_CACHE_SIZE;
+- unsigned long next = *(u32 *) romfs_read(offset);
++ unsigned long next = CRAMFS_32(*(u32 *) romfs_read(offset));
+
+ if (next > end_data) {
+ end_data = next;
+@@ -529,7 +563,7 @@
+ {
+ unsigned long offset = i->offset << 2;
+ unsigned long curr = offset + 4;
+- unsigned long next = *(u32 *) romfs_read(offset);
++ unsigned long next = CRAMFS_32(*(u32 *) romfs_read(offset));
+ unsigned long size;
+
+ if (offset == 0) {
diff --git a/package/cramfs/cramfs-03-cygwin_IO.patch b/package/cramfs/cramfs-03-cygwin_IO.patch
new file mode 100644
index 0000000..4ea358e
--- /dev/null
+++ b/package/cramfs/cramfs-03-cygwin_IO.patch
@@ -0,0 +1,13 @@
+--- cramfs-1.1/cramfsck.c.orig 2006-12-22 22:16:59.328125000 +1100
++++ cramfs-1.1/cramfsck.c 2006-12-19 01:02:05.531250000 +1100
+@@ -56,6 +56,10 @@
+ #include "linux/cramfs_fs.h"
+ #include <zlib.h>
+
++#ifdef __CYGWIN__
++#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0)
++#endif /* __CYGWIN__ */
++
+ #define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */
+
+ /* Exit codes used by fsck-type programs */
diff --git a/package/cramfs/cramfs.mk b/package/cramfs/cramfs.mk
new file mode 100644
index 0000000..7b1924e
--- /dev/null
+++ b/package/cramfs/cramfs.mk
@@ -0,0 +1,33 @@
+#############################################################
+#
+# cramfs
+#
+#############################################################
+
+CRAMFS_VERSION=1.1
+CRAMFS_SOURCE=cramfs-$(CRAMFS_VERSION).tar.gz
+CRAMFS_SITE=http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/cramfs
+
+CRAMFS_DEPENDENCIES = zlib
+HOST_CRAMFS_DEPENDENCIES = host-zlib
+
+define CRAMFS_BUILD_CMDS
+ $(TARGET_MAKE_ENV) $(MAKE) CC="$(TARGET_CC)" CFLAGS="$(TARGET_CFLAGS)" LDFLAGS="$(TARGET_LDFLAGS)" -C $(@D)
+endef
+
+define CRAMFS_INSTALL_TARGET_CMDS
+ install -m 755 $(@D)/mkcramfs $(TARGET_DIR)/usr/bin
+ install -m 755 $(@D)/cramfsck $(TARGET_DIR)/usr/bin
+endef
+
+define HOST_CRAMFS_BUILD_CMDS
+ $(HOST_MAKE_ENV) $(MAKE) CFLAGS="$(HOST_CFLAGS) -Wall -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" LDFLAGS="$(HOST_LDFLAGS)" -C $(@D)
+endef
+
+define HOST_CRAMFS_INSTALL_CMDS
+ install -m 755 $(@D)/mkcramfs $(HOST_DIR)/usr/bin
+ install -m 755 $(@D)/cramfsck $(HOST_DIR)/usr/bin
+endef
+
+$(eval $(call GENTARGETS,package,cramfs))
+$(eval $(call GENTARGETS,package,cramfs,host))
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 04/44] squashfs: new package
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (2 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 03/44] cramfs: " Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 05/44] libcap: " Thomas Petazzoni
` (41 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/Config.in | 1 +
package/squashfs/Config.in | 6 ++
.../squashfs/squashfs-4.0-build-system-fix.patch | 60 ++++++++++++++++++++
...quashfs-4.0-mksquashfs-race-condition-fix.patch | 0
package/squashfs/squashfs.mk | 30 ++++++++++
5 files changed, 97 insertions(+), 0 deletions(-)
create mode 100644 package/squashfs/Config.in
create mode 100644 package/squashfs/squashfs-4.0-build-system-fix.patch
rename {target => package}/squashfs/squashfs-4.0-mksquashfs-race-condition-fix.patch (100%)
create mode 100644 package/squashfs/squashfs.mk
diff --git a/package/Config.in b/package/Config.in
index 5a7bf27..a742063 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -187,6 +187,7 @@ if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
source "package/sfdisk/Config.in"
endif
source "package/smartmontools/Config.in"
+source "package/squashfs/Config.in"
source "package/sshfs/Config.in"
source "package/sysstat/Config.in"
if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
diff --git a/package/squashfs/Config.in b/package/squashfs/Config.in
new file mode 100644
index 0000000..3080cc3
--- /dev/null
+++ b/package/squashfs/Config.in
@@ -0,0 +1,6 @@
+config BR2_PACKAGE_SQUASHFS
+ bool "squashfs"
+ help
+ Tools to generate SquashFS filesystems.
+
+ http://squashfs.sourceforge.net/
diff --git a/package/squashfs/squashfs-4.0-build-system-fix.patch b/package/squashfs/squashfs-4.0-build-system-fix.patch
new file mode 100644
index 0000000..9db208b
--- /dev/null
+++ b/package/squashfs/squashfs-4.0-build-system-fix.patch
@@ -0,0 +1,60 @@
+Index: a/squashfs-tools/Makefile
+===================================================================
+--- a/squashfs-tools.orig/Makefile 2009-04-19 01:47:43.000000000 +0200
++++ b/squashfs-tools/Makefile 2009-04-19 01:52:36.000000000 +0200
+@@ -1,36 +1,48 @@
+ INSTALL_DIR = /usr/local/bin
+
+ INCLUDEDIR = .
++CFLAGS_R = -I$(INCLUDEDIR) -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_GNU_SOURCE
++LIBS = -lz -lpthread
+
+ CFLAGS := -I$(INCLUDEDIR) -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_GNU_SOURCE -O2
+
+ all: mksquashfs unsquashfs
+
+ mksquashfs: mksquashfs.o read_fs.o sort.o swap.o pseudo.o
+- $(CC) mksquashfs.o read_fs.o sort.o swap.o pseudo.o -lz -lpthread -lm -o $@
++ $(CC) $(LDFLAGS) mksquashfs.o read_fs.o sort.o swap.o pseudo.o -lz -lpthread -lm -o $@
+
+ mksquashfs.o: mksquashfs.c squashfs_fs.h mksquashfs.h global.h sort.h squashfs_swap.h Makefile
++ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
+
+ read_fs.o: read_fs.c squashfs_fs.h read_fs.h global.h squashfs_swap.h Makefile
++ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
+
+ sort.o: sort.c squashfs_fs.h global.h sort.h Makefile
++ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
+
+ swap.o: swap.c Makefile
++ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
+
+ pseudo.o: pseudo.c pseudo.h Makefile
++ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
+
+ unsquashfs: unsquashfs.o unsquash-1.o unsquash-2.o unsquash-3.o unsquash-4.o swap.o
+- $(CC) unsquashfs.o unsquash-1.o unsquash-2.o unsquash-3.o unsquash-4.o swap.o -lz -lpthread -lm -o $@
++ $(CC) $(LDFLAGS) unsquashfs.o unsquash-1.o unsquash-2.o unsquash-3.o unsquash-4.o swap.o -lz -lpthread -lm -o $@
+
+-unsquashfs.o: unsquashfs.h unsquashfs.c squashfs_fs.h squashfs_swap.h squashfs_compat.h global.h Makefile
++unsquashfs.o: unsquashfs.c unsquashfs.h squashfs_fs.h squashfs_swap.h squashfs_compat.h global.h Makefile
++ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
+
+-unsquash-1.o: unsquashfs.h unsquash-1.c squashfs_fs.h squashfs_compat.h global.h Makefile
++unsquash-1.o: unsquash-1.c unsquashfs.h squashfs_fs.h squashfs_compat.h global.h Makefile
++ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
+
+-unsquash-2.o: unsquashfs.h unsquash-2.c unsquashfs.h squashfs_fs.h squashfs_compat.h global.h Makefile
++unsquash-2.o: unsquash-2.c unsquashfs.h unsquashfs.h squashfs_fs.h squashfs_compat.h global.h Makefile
++ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
+
+-unsquash-3.o: unsquashfs.h unsquash-3.c squashfs_fs.h squashfs_compat.h global.h Makefile
++unsquash-3.o: unsquash-3.c unsquashfs.h squashfs_fs.h squashfs_compat.h global.h Makefile
++ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
+
+-unsquash-4.o: unsquashfs.h unsquash-4.c squashfs_fs.h squashfs_swap.h global.h Makefile
++unsquash-4.o: unsquash-4.c unsquashfs.h squashfs_fs.h squashfs_swap.h global.h Makefile
++ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
+
+ clean:
+ -rm -f *.o mksquashfs unsquashfs
diff --git a/target/squashfs/squashfs-4.0-mksquashfs-race-condition-fix.patch b/package/squashfs/squashfs-4.0-mksquashfs-race-condition-fix.patch
similarity index 100%
rename from target/squashfs/squashfs-4.0-mksquashfs-race-condition-fix.patch
rename to package/squashfs/squashfs-4.0-mksquashfs-race-condition-fix.patch
diff --git a/package/squashfs/squashfs.mk b/package/squashfs/squashfs.mk
new file mode 100644
index 0000000..ab05b06
--- /dev/null
+++ b/package/squashfs/squashfs.mk
@@ -0,0 +1,30 @@
+SQUASHFS_VERSION=4.0
+SQUASHFS_SOURCE=squashfs$(SQUASHFS_VERSION).tar.gz
+SQUASHFS_SITE=http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/squashfs
+
+SQUASHFS_DEPENDENCIES = zlib
+HOST_SQUASHFS_DEPENDENCIES = host-zlib
+
+define SQUASHFS_BUILD_CMDS
+ $(TARGET_MAKE_ENV) $(MAKE) \
+ CC="$(TARGET_CC)" \
+ CFLAGS="$(TARGET_CFLAGS)" \
+ LDFLAGS="$(TARGET_LDFLAGS)" \
+ -C $(@D)/squashfs-tools/
+endef
+
+define SQUASHFS_INSTALL_TARGET_CMDS
+ $(TARGET_MAKE_ENV) $(MAKE) -C $(@D)/squashfs-tools/ INSTALL_DIR=$(TARGET_DIR)/usr/bin install
+endef
+
+define HOST_SQUASHFS_BUILD_CMDS
+ $(HOST_MAKE_ENV) $(MAKE) -C $(@D)/squashfs-tools/
+endef
+
+define HOST_SQUASHFS_INSTALL_CMDS
+ $(HOST_MAKE_ENV) $(MAKE) -C $(@D)/squashfs-tools/ INSTALL_DIR=$(HOST_DIR)/usr/bin install
+endef
+
+$(eval $(call GENTARGETS,package,squashfs))
+$(eval $(call GENTARGETS,package,squashfs,host))
+
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 05/44] libcap: new package
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (3 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 04/44] squashfs: " Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 06/44] bzip2: convert to gentargets, add host package, bump version Thomas Petazzoni
` (40 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Needed as a dependency of cdrkit, which contains genisomage, useful
for generating ISO9660 filesystem images.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/Config.in | 1 +
package/libcap/Config.in | 10 +++++
package/libcap/libcap-2.19-build-system.patch | 55 +++++++++++++++++++++++++
package/libcap/libcap.mk | 27 ++++++++++++
4 files changed, 93 insertions(+), 0 deletions(-)
create mode 100644 package/libcap/Config.in
create mode 100644 package/libcap/libcap-2.19-build-system.patch
create mode 100644 package/libcap/libcap.mk
diff --git a/package/Config.in b/package/Config.in
index a742063..f3f4213 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -295,6 +295,7 @@ source "package/libupnp/Config.in"
endmenu
menu "Other"
+source "package/libcap/Config.in"
source "package/libdaemon/Config.in"
source "package/libelf/Config.in"
source "package/libevent/Config.in"
diff --git a/package/libcap/Config.in b/package/libcap/Config.in
new file mode 100644
index 0000000..f1fc8fa
--- /dev/null
+++ b/package/libcap/Config.in
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_LIBCAP
+ bool "libcap"
+ help
+ This library implements the user-space interfaces to the
+ POSIX 1003.1e capabilities available in Linux kernels. These
+ capabilities are a partitioning of the all powerful root
+ privilege into a set of distinct privileges.
+
+ http://sites.google.com/site/fullycapable/
+
diff --git a/package/libcap/libcap-2.19-build-system.patch b/package/libcap/libcap-2.19-build-system.patch
new file mode 100644
index 0000000..42a5518
--- /dev/null
+++ b/package/libcap/libcap-2.19-build-system.patch
@@ -0,0 +1,55 @@
+---
+ Make.Rules | 15 ++++++++-------
+ libcap/Makefile | 2 +-
+ 2 files changed, 9 insertions(+), 8 deletions(-)
+
+Index: libcap-2.19/Make.Rules
+===================================================================
+--- libcap-2.19.orig/Make.Rules
++++ libcap-2.19/Make.Rules
+@@ -45,24 +45,25 @@
+ KERNEL_HEADERS := $(topdir)/libcap/include
+ IPATH += -I$(topdir)/libcap/include -I$(KERNEL_HEADERS)
+
+-CC := gcc
+-CFLAGS := -O2
+-BUILD_CC := $(CC)
+-BUILD_CFLAGS := $(CFLAGS) $(IPATH)
+-AR := ar
+-RANLIB := ranlib
++CC ?= gcc
++CFLAGS ?= -O2
++CC_FOR_BUILD ?= $(CC)
++CFLAGS_FOR_BUILD ?= $(CFLAGS)
++AR ?= ar
++RANLIB ?= ranlib
+ DEBUG = -g #-DDEBUG
+ WARNINGS=-fPIC -Wall -Wwrite-strings \
+ -Wpointer-arith -Wcast-qual -Wcast-align \
+ -Wstrict-prototypes -Wmissing-prototypes \
+ -Wnested-externs -Winline -Wshadow
+ LD=$(CC) -Wl,-x -shared
+-LDFLAGS := #-g
++LDFLAGS ?= #-g
+
+ SYSTEM_HEADERS = /usr/include
+ INCS=$(topdir)/libcap/include/sys/capability.h
+ LDFLAGS += -L$(topdir)/libcap
+ CFLAGS += -Dlinux $(WARNINGS) $(DEBUG) $(IPATH)
++CFLAGS_FOR_BUILD += $(IPATH)
+ PAM_CAP := $(shell if [ -f /usr/include/security/pam_modules.h ]; then echo yes ; else echo no ; fi)
+ INDENT := $(shell if [ -n "$(which indent 2>/dev/null)" ]; then echo "| indent -kr" ; fi)
+ DYNAMIC := $(shell if [ ! -d "$(topdir)/.git" ]; then echo yes; fi)
+Index: libcap-2.19/libcap/Makefile
+===================================================================
+--- libcap-2.19.orig/libcap/Makefile
++++ libcap-2.19/libcap/Makefile
+@@ -33,7 +33,7 @@
+ endif
+
+ _makenames: _makenames.c cap_names.list.h
+- $(BUILD_CC) $(BUILD_CFLAGS) $< -o $@
++ $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $< -o $@
+
+ cap_names.h: _makenames
+ ./_makenames > cap_names.h
diff --git a/package/libcap/libcap.mk b/package/libcap/libcap.mk
new file mode 100644
index 0000000..3ea5e51
--- /dev/null
+++ b/package/libcap/libcap.mk
@@ -0,0 +1,27 @@
+LIBCAP_VERSION=2.19
+LIBCAP_SOURCE=libcap-$(LIBCAP_VERSION).tar.bz2
+LIBCAP_SITE=http://www.kernel.org/pub/linux/libs/security/linux-privs/libcap2/
+LIBCAP_INSTALL_STAGING=YES
+
+define LIBCAP_BUILD_CMDS
+ $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) LIBATTR=no
+endef
+
+define LIBCAP_INSTALL_STAGING_CMDS
+ $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) LIBATTR=no DESTDIR=$(STAGING_DIR) install
+endef
+
+define LIBCAP_INSTALL_TARGET_CMDS
+ install -D $(STAGING_DIR)/usr/lib/libcap.so.* $(TARGET_DIR)/usr/lib
+endef
+
+define HOST_LIBCAP_BUILD_CMDS
+ $(HOST_MAKE_ENV) $(HOST_CONFIGURE_OPTS) $(MAKE) -C $(@D) LIBATTR=no
+endef
+
+define HOST_LIBCAP_INSTALL_CMDS
+ $(HOST_MAKE_ENV) $(MAKE) -C $(@D) LIBATTR=no DESTDIR=$(HOST_DIR) install
+endef
+
+$(eval $(call GENTARGETS,package,libcap))
+$(eval $(call GENTARGETS,package,libcap,host))
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 06/44] bzip2: convert to gentargets, add host package, bump version
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (4 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 05/44] libcap: " Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 07/44] cmake: new package Thomas Petazzoni
` (39 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/bzip2/bzip2.mk | 140 ++++++++++++++++++++---------------------------
1 files changed, 60 insertions(+), 80 deletions(-)
diff --git a/package/bzip2/bzip2.mk b/package/bzip2/bzip2.mk
index 98de532..43ab5f2 100644
--- a/package/bzip2/bzip2.mk
+++ b/package/bzip2/bzip2.mk
@@ -3,65 +3,55 @@
# bzip2
#
#############################################################
-BZIP2_VERSION:=1.0.4
+BZIP2_VERSION:=1.0.5
BZIP2_SOURCE:=bzip2-$(BZIP2_VERSION).tar.gz
BZIP2_SITE:=http://www.bzip.org/$(BZIP2_VERSION)
-BZIP2_DIR:=$(BUILD_DIR)/bzip2-$(BZIP2_VERSION)
-BZIP2_CAT:=$(ZCAT)
-BZIP2_BINARY:=$(BZIP2_DIR)/bzip2
-BZIP2_TARGET_BINARY:=$(TARGET_DIR)/usr/bin/bzmore
+BZIP2_STAGING_INSTALL=YES
-$(DL_DIR)/$(BZIP2_SOURCE):
- $(call DOWNLOAD,$(BZIP2_SITE),$(BZIP2_SOURCE))
+define BZIP2_FIX_MAKEFILE
+ $(SED) "s,ln \$$(,ln -snf \$$(,g" $(@D)/Makefile
+ $(SED) "s,ln -s (lib.*),ln -snf \$$1; ln -snf libbz2.so.$(BZIP2_VERSION) \
+ libbz2.so,g" $(@D)/Makefile-libbz2_so
+ $(SED) "s:-O2:$(TARGET_CFLAGS):" $(@D)/Makefile
+ $(SED) "s:-O2:$(TARGET_CFLAGS):" $(@D)/Makefile-libbz2_so
+endef
-bzip2-source: $(DL_DIR)/$(BZIP2_SOURCE)
+BZIP2_POST_PATCH_HOOKS += BZIP2_FIX_MAKEFILE
+
+define BZIP2_NOLARGEFILE_FIX_MAKEFILE
+ $(SED) "s,^BIGFILES,#BIGFILES,g" $(@D)/Makefile
+ $(SED) "s,^BIGFILES,#BIGFILES,g" $(@D)/Makefile-libbz2_so
+endef
-$(BZIP2_DIR)/.unpacked: $(DL_DIR)/$(BZIP2_SOURCE)
- $(BZIP2_CAT) $(DL_DIR)/$(BZIP2_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- $(SED) "s,ln \$$(,ln -snf \$$(,g" $(BZIP2_DIR)/Makefile
- $(SED) "s,ln -s (lib.*),ln -snf \$$1; ln -snf libbz2.so.$(BZIP2_VERSION) \
- libbz2.so,g" $(BZIP2_DIR)/Makefile-libbz2_so
ifneq ($(BR2_LARGEFILE),y)
- $(SED) "s,^BIGFILES,#BIGFILES,g" $(BZIP2_DIR)/Makefile
- $(SED) "s,^BIGFILES,#BIGFILES,g" $(BZIP2_DIR)/Makefile-libbz2_so
+BZIP2_POST_PATCH_HOOKS += BZIP2_NOLARGEFILE_FIX_MAKEFILE
endif
- $(SED) "s:-O2:$(TARGET_CFLAGS):" $(BZIP2_DIR)/Makefile
- $(SED) "s:-O2:$(TARGET_CFLAGS):" $(BZIP2_DIR)/Makefile-libbz2_so
- touch $@
-$(STAGING_DIR)/usr/lib/libbz2.so.$(BZIP2_VERSION): $(BZIP2_DIR)/.unpacked
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) CC=$(TARGET_CC) RANLIB=$(TARGET_RANLIB) AR=$(TARGET_AR) \
- -C $(BZIP2_DIR) -f Makefile-libbz2_so
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) CC=$(TARGET_CC) RANLIB=$(TARGET_RANLIB) AR=$(TARGET_AR) \
- -C $(BZIP2_DIR) libbz2.a
- cp $(BZIP2_DIR)/bzlib.h $(STAGING_DIR)/usr/include/
- cp $(BZIP2_DIR)/libbz2.so.$(BZIP2_VERSION) $(STAGING_DIR)/usr/lib/
- cp $(BZIP2_DIR)/libbz2.a $(STAGING_DIR)/usr/lib/
+define BZIP2_BUILD_CMDS
+ $(TARGET_MAKE_ENV) \
+ $(MAKE) -C $(@D) -f Makefile-libbz2_so \
+ CC="$(TARGET_CC)" RANLIB="$(TARGET_RANLIB)" AR="$(TARGET_AR)"
+ $(TARGET_MAKE_ENV) \
+ $(MAKE) -C $(@D) \
+ CC="$(TARGET_CC)" RANLIB="$(TARGET_RANLIB)" AR="$(TARGET_AR)" \
+ libbz2.a bzip2 bzip2recover
+endef
+
+define BZIP2_INSTALL_STAGING_CMDS
+ cp $(@D)/bzlib.h $(STAGING_DIR)/usr/include/
+ cp $(@D)/libbz2.so.$(BZIP2_VERSION) $(STAGING_DIR)/usr/lib/
+ cp $(@D)/libbz2.a $(STAGING_DIR)/usr/lib/
(cd $(STAGING_DIR)/usr/lib/; \
ln -snf libbz2.so.$(BZIP2_VERSION) libbz2.so; \
- )
- (cd $(STAGING_DIR)/usr/lib; \
ln -snf libbz2.so.$(BZIP2_VERSION) libbz2.so.1.0; \
ln -snf libbz2.so.$(BZIP2_VERSION) libbz2.so.1; \
)
+endef
-$(BZIP2_BINARY): $(STAGING_DIR)/usr/lib/libbz2.so.$(BZIP2_VERSION)
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) CC=$(TARGET_CC) -C $(BZIP2_DIR) bzip2 bzip2recover
- touch -c $@
-
-$(BZIP2_TARGET_BINARY): $(BZIP2_BINARY)
- (cd $(TARGET_DIR)/usr/bin; \
- rm -f bzip2 bunzip2 bzcat bzip2recover \
- bzgrep bzegrep bzfgrep bzmore bzless bzdiff bzcmp; \
- )
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) PREFIX=$(TARGET_DIR)/usr -C $(BZIP2_DIR) install
- rm -f $(TARGET_DIR)/usr/lib/libbz2.a
- rm -f $(TARGET_DIR)/usr/include/bzlib.h
- cp $(BZIP2_DIR)/libbz2.so.$(BZIP2_VERSION) $(TARGET_DIR)/usr/lib/
+define B2IP_INSTALL_TARGET_CMDS
+ $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) \
+ $(MAKE) PREFIX=$(TARGET_DIR)/usr -C $(@D) install
+ cp $(@D)/libbz2.so.$(BZIP2_VERSION) $(TARGET_DIR)/usr/lib/
(cd $(TARGET_DIR)/usr/lib; \
ln -snf libbz2.so.$(BZIP2_VERSION) libbz2.so.1.0; \
ln -snf libbz2.so.$(BZIP2_VERSION) libbz2.so; \
@@ -74,47 +64,37 @@ $(BZIP2_TARGET_BINARY): $(BZIP2_BINARY)
ln -snf bzgrep bzegrep; \
ln -snf bzgrep bzfgrep; \
)
-ifneq ($(BR2_HAVE_INFOPAGES),y)
- rm -rf $(TARGET_DIR)/usr/info
-endif
-ifneq ($(BR2_HAVE_MANPAGES),y)
- rm -rf $(TARGET_DIR)/usr/man
-endif
- rm -rf $(TARGET_DIR)/share/locale
- rm -rf $(TARGET_DIR)/usr/share/doc
-
-$(TARGET_DIR)/usr/lib/libbz2.a: $(STAGING_DIR)/usr/lib/libbz2.a
- mkdir -p $(TARGET_DIR)/usr/include
- cp $(STAGING_DIR)/usr/include/bzlib.h $(TARGET_DIR)/usr/include/
- cp $(STAGING_DIR)/usr/lib/libbz2.a $(TARGET_DIR)/usr/lib/
- rm -f $(TARGET_DIR)/lib/libbz2.so
- (cd $(TARGET_DIR)/usr/lib; \
- ln -fs /usr/lib/libbz2.so.1.0 libbz2.so; \
- )
- -$(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $(TARGET_DIR)/usr/lib/libbz2.so.1.0
- touch -c $@
-
-bzip2-headers: $(TARGET_DIR)/usr/lib/libbz2.a
-
-bzip2: $(BZIP2_TARGET_BINARY)
+endef
-bzip2-clean:
+define BZIP2_CLEAN_CMDS
rm -f $(addprefix $(TARGET_DIR),/lib/libbz2.* \
/usr/lib/libbz2.* \
/usr/include/bzlib.h)
rm -f $(addprefix $(STAGING_DIR),/lib/libbz2.* \
/usr/lib/libbz2.* \
/usr/include/bzlib.h)
- -$(MAKE) -C $(BZIP2_DIR) clean
+ -$(MAKE) -C $(@D) clean
+endef
-bzip2-dirclean:
- rm -rf $(BZIP2_DIR)
+define HOST_BZIP2_FIX_MAKEFILE
+ $(SED) "s,ln \$$(,ln -snf \$$(,g" $(@D)/Makefile
+ $(SED) "s,ln -s (lib.*),ln -snf \$$1; ln -snf libbz2.so.$(BZIP2_VERSION) \
+ libbz2.so,g" $(@D)/Makefile-libbz2_so
+ $(SED) "s:-O2:$(HOST_CFLAGS):" $(@D)/Makefile
+ $(SED) "s:-O2:$(HOST_CFLAGS):" $(@D)/Makefile-libbz2_so
+endef
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_PACKAGE_BZIP2),y)
-TARGETS+=bzip2
-endif
+HOST_BZIP2_POST_PATCH_HOOKS += HOST_BZIP2_FIX_MAKEFILE
+
+define HOST_BZIP2_BUILD_CMDS
+ $(HOST_MAKE_ENV) $(MAKE) -C $(@D) -f Makefile-libbz2_so
+ $(HOST_MAKE_ENV) $(MAKE) -C $(@D) libbz2.a bzip2 bzip2recover
+endef
+
+define HOST_BZIP2_INSTALL_CMDS
+ $(HOST_MAKE_ENV) \
+ $(MAKE) PREFIX=$(HOST_DIR)/usr -C $(@D) install
+endef
+
+$(eval $(call GENTARGETS,package,bzip2))
+$(eval $(call GENTARGETS,package,bzip2,host))
\ No newline at end of file
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 07/44] cmake: new package
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (5 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 06/44] bzip2: convert to gentargets, add host package, bump version Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 08/44] cdrkit: " Thomas Petazzoni
` (38 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Only compilation for the host is supported, why explains why we don't
have a Config.in and the corresponding BR2_PACKAGE_CMAKE option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/cmake/cmake.mk | 20 ++++++++++++++++++++
1 files changed, 20 insertions(+), 0 deletions(-)
create mode 100644 package/cmake/cmake.mk
diff --git a/package/cmake/cmake.mk b/package/cmake/cmake.mk
new file mode 100644
index 0000000..42d4ff5
--- /dev/null
+++ b/package/cmake/cmake.mk
@@ -0,0 +1,20 @@
+CMAKE_VERSION=2.8.0
+CMAKE_SOURCE=cmake-$(CMAKE_VERSION).tar.gz
+CMAKE_SITE=http://www.cmake.org/files/v2.8/
+
+define HOST_CMAKE_CONFIGURE_CMDS
+ (cd $(@D); \
+ ./bootstrap --prefix=$(HOST_DIR)/usr --parallel=$(BR2_JLEVEL) \
+ )
+endef
+
+define HOST_CMAKE_BUILD_CMDS
+ $(HOST_MAKE_ENV) $(MAKE) -C $(@D)
+endef
+
+define HOST_CMAKE_INSTALL_CMDS
+ $(HOST_MAKE_ENV) $(MAKE) -C $(@D) install
+endef
+
+$(eval $(call GENTARGETS,package,cmake))
+$(eval $(call GENTARGETS,package,cmake,host))
\ No newline at end of file
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 08/44] cdrkit: new package
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (6 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 07/44] cmake: new package Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 09/44] e2fsprogs: add support for host package Thomas Petazzoni
` (37 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Supported both for the target and the host. Will be used by the root
filesystem generation code, thanks to genisoimage.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/Config.in | 1 +
package/cdrkit/Config.in | 11 ++++++++
package/cdrkit/cdrkit.mk | 63 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 75 insertions(+), 0 deletions(-)
create mode 100644 package/cdrkit/Config.in
create mode 100644 package/cdrkit/cdrkit.mk
diff --git a/package/Config.in b/package/Config.in
index f3f4213..0dac949 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -146,6 +146,7 @@ endmenu
menu "Hardware handling"
source "package/acpid/Config.in"
+source "package/cdrkit/Config.in"
source "package/cramfs/Config.in"
source "package/dbus/Config.in"
source "package/dbus-glib/Config.in"
diff --git a/package/cdrkit/Config.in b/package/cdrkit/Config.in
new file mode 100644
index 0000000..2e25581
--- /dev/null
+++ b/package/cdrkit/Config.in
@@ -0,0 +1,11 @@
+config BR2_PACKAGE_CDRKIT
+ # Needed for libbz
+ select BR2_PACKAGE_BZIP2
+ select BR2_PACKAGE_LIBCAP
+ bool "cdrkit"
+ help
+ cdrkit is a suite of programs for recording CDs and DVDs,
+ blanking CD-RW media, creating ISO-9660 filesystem images,
+ extracting audio CD data, and more.
+
+ http://www.cdrkit.org/
diff --git a/package/cdrkit/cdrkit.mk b/package/cdrkit/cdrkit.mk
new file mode 100644
index 0000000..a6a2e80
--- /dev/null
+++ b/package/cdrkit/cdrkit.mk
@@ -0,0 +1,63 @@
+CDRKIT_VERSION=1.1.10
+CDRKIT_SOURCE=cdrkit-$(CDRKIT_VERSION).tar.gz
+CDRKIT_SITE=http://www.cdrkit.org/releases/
+
+CDRKIT_DEPENDENCIES=libcap bzip2 host-cmake
+HOST_CDRKIT_DEPENDENCIES=host-libcap host-cmake host-bzip2
+
+ifeq ($(BR2_ENDIAN),"BIG")
+CMAKE_ENDIAN_OPT=-DBITFIELDS_HTOL=1
+else
+CMAKE_ENDIAN_OPT=-DBITFIELDS_HTOL=0
+endif
+
+define CDRKIT_CONFIGURE_CMDS
+ -mkdir $(@D)/build
+ (cd $(@D)/build ; \
+ $(HOST_DIR)/usr/bin/cmake .. \
+ -Wno-dev \
+ -DCMAKE_SYSTEM_NAME:STRING="Linux" \
+ -DCMAKE_C_COMPILER:FILEPATH="$(TARGET_CC)" \
+ -DCMAKE_CXX_COMPILER:FILEPATH="$(TARGET_CXX)" \
+ -DCMAKE_C_FLAGS:STRING="$(TARGET_CFLAGS)" \
+ -DCMAKE_EXE_LINKER_FLAGS:STRING="$(TARGET_LDFLAGS)" \
+ -DCMAKE_MODULE_LINKER_FLAGS:STRING="$(TARGET_LDFLAGS)" \
+ -DCMAKE_SHARED_LINKER_FLAGS:STRING="$(TARGET_LDFLAGS)" \
+ -DCMAKE_FIND_ROOT_PATH:PATH="$(STAGING_DIR)" \
+ -DCMAKE_INSTALL_PREFIX:PATH="$(TARGET_DIR)/usr" \
+ $(CMAKE_ENDIAN_OPT) \
+ )
+endef
+
+define CDRKIT_BUILD_CMDS
+ $(TARGET_MAKE_ENV) $(MAKE) -C $(@D)/build
+endef
+
+define CDRKIT_INSTALL_TARGET_CMDS
+ $(TARGET_MAKE_ENV) $(MAKE) -C $(@D)/build install
+endef
+
+define HOST_CDRKIT_CONFIGURE_CMDS
+ -mkdir $(@D)/build
+ (cd $(@D)/build ; \
+ $(HOST_DIR)/usr/bin/cmake .. \
+ -Wno-dev \
+ -DCMAKE_C_FLAGS="$(HOST_CFLAGS)" \
+ -DCMAKE_EXE_LINKER_FLAGS:STRING="$(HOST_LDFLAGS)" \
+ -DCMAKE_MODULE_LINKER_FLAGS:STRING="$(HOST_LDFLAGS)" \
+ -DCMAKE_SHARED_LINKER_FLAGS:STRING="$(HOST_LDFLAGS)" \
+ -DCMAKE_INSTALL_PREFIX:STRING="$(HOST_DIR)/usr" \
+ )
+endef
+
+define HOST_CDRKIT_BUILD_CMDS
+ $(HOST_MAKE_ENV) $(MAKE) -C $(@D)/build
+endef
+
+define HOST_CDRKIT_INSTALL_CMDS
+ $(HOST_MAKE_ENV) $(MAKE) -C $(@D)/build install
+endef
+
+$(eval $(call GENTARGETS,package,cdrkit))
+$(eval $(call GENTARGETS,package,cdrkit,host))
+
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 09/44] e2fsprogs: add support for host package
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (7 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 08/44] cdrkit: " Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 10/44] mtd: convert to gentargets, add " Thomas Petazzoni
` (36 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Host package is needed to get libuuid installed for the host, needed
to build the mtd utils for the host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/e2fsprogs/e2fsprogs.mk | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/package/e2fsprogs/e2fsprogs.mk b/package/e2fsprogs/e2fsprogs.mk
index 09db996..af3c3ed 100644
--- a/package/e2fsprogs/e2fsprogs.mk
+++ b/package/e2fsprogs/e2fsprogs.mk
@@ -26,7 +26,12 @@ E2FSPROGS_CONF_OPT = \
E2FSPROGS_MAKE_OPT = \
LDCONFIG=true
+define HOST_E2FSPROGS_INSTALL_CMDS
+ $(HOST_MAKE_ENV) $(MAKE) -C $(@D) install install-libs
+endef
+
$(eval $(call AUTOTARGETS,package,e2fsprogs))
+$(eval $(call AUTOTARGETS,package,e2fsprogs,host))
# binaries to keep or remove
E2FSPROGS_BINTARGETS_$(BR2_PACKAGE_E2FSPROGS_BADBLOCKS) += usr/sbin/badblocks
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 10/44] mtd: convert to gentargets, add host package
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (8 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 09/44] e2fsprogs: add support for host package Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 11/44] cloop: new package Thomas Petazzoni
` (35 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/mtd/mtd.mk | 144 +++++++++++++++++-----------------------------------
1 files changed, 46 insertions(+), 98 deletions(-)
diff --git a/package/mtd/mtd.mk b/package/mtd/mtd.mk
index 3e0fcaf..5a449f2 100644
--- a/package/mtd/mtd.mk
+++ b/package/mtd/mtd.mk
@@ -6,65 +6,21 @@
MTD_VERSION:=1.3.1
MTD_SOURCE:=mtd-utils-$(MTD_VERSION).tar.bz2
MTD_SITE:=ftp://ftp.infradead.org/pub/mtd-utils
-MTD_DIR:=$(BUILD_DIR)/mtd-utils-$(MTD_VERSION)
-MTD_HOST_DIR:= $(MTD_DIR)-host
-MTD_CAT:=$(BZCAT)
-#############################################################
-#
-# Build mkfs.jffs2 and sumtool for use on the local host system if
-# needed by target/jffs2root.
-#
-#############################################################
-MKFS_JFFS2 := $(HOST_DIR)/usr/sbin/mkfs.jffs2
-SUMTOOL := $(HOST_DIR)/usr/sbin/sumtool
-
-$(DL_DIR)/$(MTD_SOURCE):
- $(call DOWNLOAD,$(MTD_SITE),$(MTD_SOURCE))
-
-$(MTD_HOST_DIR)/.unpacked: $(DL_DIR)/$(MTD_SOURCE)
- mkdir -p $(@D)
- $(MTD_CAT) $^ | tar $(TAR_STRIP_COMPONENTS)=1 -C $(@D) $(TAR_OPTIONS) -
- toolchain/patch-kernel.sh $(MTD_HOST_DIR) \
- package/mtd/ mtd-utils-\*.patch
- touch $@
-
-$(MTD_HOST_DIR)/mkfs.jffs2: $(MTD_HOST_DIR)/.unpacked
- CC="$(HOSTCC)" CFLAGS="$(HOST_CFLAGS)" LDFLAGS="$(HOST_LDFLAGS)" \
- CROSS= $(MAKE) BUILDDIR=$(MTD_HOST_DIR) \
- WITHOUT_XATTR=1 -C $(MTD_HOST_DIR) $@
+HOST_MTD_DEPENDENCIES = host-lzo host-e2fsprogs
-$(MKFS_JFFS2): $(MTD_HOST_DIR)/mkfs.jffs2
- install -m 0755 -D $^ $@
-
-$(MTD_HOST_DIR)/sumtool: $(MTD_HOST_DIR)/.unpacked
+define HOST_MTD_BUILD_CMDS
CC="$(HOSTCC)" CFLAGS="$(HOST_CFLAGS)" LDFLAGS="$(HOST_LDFLAGS)" \
- CROSS= $(MAKE) BUILDDIR=$(MTD_HOST_DIR) \
- WITHOUT_XATTR=1 -C $(MTD_HOST_DIR) $@
-
-$(SUMTOOL): $(MTD_HOST_DIR)/sumtool
- install -m 0755 $^ $@
-
-mtd-host: host-lzo $(MKFS_JFFS2) $(SUMTOOL)
-
-mtd-host-source: $(DL_DIR)/$(MTD_SOURCE)
+ CROSS= $(MAKE) BUILDDIR=$(@D) \
+ WITHOUT_XATTR=1 -C $(@D)
+endef
-mtd-host-clean:
- -$(MAKE) -C $(MTD_HOST_DIR) clean
- rm -f $(MKFS_JFFS2) $(SUMTOOL)
+define HOST_MTD_INSTALL_CMDS
+ $(MAKE) BUILDDIR=$(@D) DESTDIR=$(HOST_DIR) -C $(@D) install
+endef
-mtd-host-dirclean:
- rm -rf $(MTD_HOST_DIR)
-
-#############################################################
-#
-# build mtd for use on the target system
-#
-#############################################################
-$(MTD_DIR)/.unpacked: $(DL_DIR)/$(MTD_SOURCE)
- $(MTD_CAT) $(DL_DIR)/$(MTD_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- toolchain/patch-kernel.sh $(MTD_DIR) package/mtd/ mtd-utils-\*.patch
- touch $@
+MKFS_JFFS2=$(HOST_DIR)/usr/sbin/mkfs.jffs2
+SUMTOOL=$(HOST_DIR)/usr/sbin/sumtool
MTD_TARGETS_$(BR2_PACKAGE_MTD_DOCFDISK) += docfdisk
MTD_TARGETS_$(BR2_PACKAGE_MTD_DOC_LOADBIOS) += doc_loadbios
@@ -105,50 +61,42 @@ MTD_TARGETS_UBI_$(BR2_PACKAGE_MTD_UBIRMVOL) += ubirmvol
MTD_TARGETS_UBI_$(BR2_PACKAGE_MTD_UBIRSVOL) += ubirsvol
MTD_TARGETS_UBI_$(BR2_PACKAGE_MTD_UBIUPDATEVOL) += ubiupdatevol
-MTD_TARGETS := $(addprefix $(MTD_DIR)/, $(MTD_TARGETS_y))
-MTD_UBI_TARGETS := $(addprefix $(MTD_DIR)/ubi-utils/, $(MTD_TARGETS_UBI_y))
-MTD_BUILD_TARGETS := $(MTD_TARGETS) $(MTD_UBI_TARGETS)
-
-$(MTD_BUILD_TARGETS): $(MTD_DIR)/.unpacked
-ifneq ($(MTD_TARGETS),)
- $(MAKE) $(TARGET_CONFIGURE_ENV) \
- BUILDDIR=$(MTD_DIR) \
- CROSS=$(TARGET_CROSS) CC=$(TARGET_CC) \
- WITHOUT_XATTR=1 WITHOUT_LARGEFILE=1 \
- -C $(MTD_DIR) $(MTD_TARGETS)
+MTD_MAKE_COMMON_FLAGS = \
+ $(TARGET_CONFIGURE_ENV) \
+ CROSS=$(TARGET_CROSS) CC=$(TARGET_CC) \
+ WITHOUT_XATTR=1 WITHOUT_LARGEFILE=1
+
+ifneq ($(MTD_TARGETS_y),)
+define MTD_TARGETS_BUILD
+ $(MAKE) $(MTD_MAKE_COMMON_FLAGS) \
+ BUILDDIR=$(@D) \
+ -C $(@D) \
+ $(addprefix $(@D)/, $(MTD_TARGETS_y))
+endef
endif
-ifneq ($(MTD_UBI_TARGETS),)
- $(MAKE) $(TARGET_CONFIGURE_ENV) \
- BUILDDIR=$(MTD_DIR)/ubi-utils \
- CROSS=$(TARGET_CROSS) CC=$(TARGET_CC) \
- WITHOUT_XATTR=1 WITHOUT_LARGEFILE=1 \
- -C $(MTD_DIR)/ubi-utils $(MTD_UBI_TARGETS)
-endif
-
-MTD_TARGET_BINS := $(addprefix $(TARGET_DIR)/usr/sbin/,\
- $(MTD_TARGETS_y) $(MTD_TARGETS_UBI_y))
-
-$(MTD_TARGET_BINS): $(MTD_BUILD_TARGETS)
- mkdir -p $(TARGET_DIR)/usr/sbin
- $(INSTALL) -m 0755 $^ $(TARGET_DIR)/usr/sbin
-
-mtd: $(if $(BR2_PACKAGE_MTD_MKFSJFFS2),zlib lzo) $(MTD_TARGET_BINS)
-
-mtd-source: $(DL_DIR)/$(MTD_SOURCE)
-
-mtd-clean:
- -$(MAKE) -C $(MTD_DIR) clean
- rm -f $(MTD_TARGET_BINS)
-mtd-dirclean:
- rm -rf $(MTD_DIR)
-
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_PACKAGE_MTD),y)
-TARGETS+=mtd
+ifneq ($(MTD_TARGETS_UBI_y),)
+define MTD_TARGETS_UBI_BUILD
+ $(MAKE) $(MTD_MAKE_COMMON_FLAGS) \
+ BUILDDIR=$(@D)/ubi-utils/ \
+ -C $(@D)/ubi-utils \
+ $(addprefix $(@D)/ubi-utils/, $(MTD_TARGETS_UBI_y))
+endef
endif
+
+define MTD_BUILD_CMDS
+ $(MTD_TARGETS_BUILD)
+ $(MTD_TARGETS_UBI_BUILD)
+endef
+
+define MTD_INSTALL_TARGET_CMDS
+ for f in $(MTD_TARGETS_y) ; do \
+ install -m 0755 $(@D)/$$f $(TARGET_DIR)/usr/sbin/$$f ; \
+ done ; \
+ for f in $(MTD_TARGETS_UBI_y) ; do \
+ install -m 0755 $(@D)/ubi-utils/$$f $(TARGET_DIR)/usr/sbin/$$f ; \
+ done
+endef
+
+$(eval $(call GENTARGETS,package,mtd))
+$(eval $(call GENTARGETS,package,mtd,host))
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 11/44] cloop: new package
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (9 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 10/44] mtd: convert to gentargets, add " Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 12/44] lzma: convert the host package to the autotools infrastructure Thomas Petazzoni
` (34 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Only the host variant is supported, which explains why there is no
Config.in file. Will be used by the filesystem generation code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/cloop/cloop.mk | 18 ++++++++++++++++++
1 files changed, 18 insertions(+), 0 deletions(-)
create mode 100644 package/cloop/cloop.mk
diff --git a/package/cloop/cloop.mk b/package/cloop/cloop.mk
new file mode 100644
index 0000000..f1c1e1c
--- /dev/null
+++ b/package/cloop/cloop.mk
@@ -0,0 +1,18 @@
+CLOOP_VERSION=2.631-1
+CLOOP_SOURCE=cloop_$(CLOOP_VERSION).tar.gz
+CLOOP_SITE=http://debian-knoppix.alioth.debian.org/sources/
+
+HOST_CLOOP_DEPENDENCIES = host-zlib
+
+define HOST_CLOOP_BUILD_CMDS
+ $(HOST_MAKE_ENV) $(MAKE1) \
+ CFLAGS="$(HOST_CFLAGS) -Wall -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DUSE_ERROR_SILENT" -C $(@D) APPSONLY=yes
+endef
+
+define HOST_CLOOP_INSTALL_CMDS
+ install -m 755 $(@D)/create_compressed_fs $(HOST_DIR)/usr/bin
+ install -m 755 $(@D)/extract_compressed_fs $(HOST_DIR)/usr/bin
+endef
+
+$(eval $(call GENTARGETS,package,cloop))
+$(eval $(call GENTARGETS,package,cloop,host))
\ No newline at end of file
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 12/44] lzma: convert the host package to the autotools infrastructure
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (10 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 11/44] cloop: new package Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 13/44] target/cloop: cleanup Thomas Petazzoni
` (33 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Note that we loose the ability to use a lzma command available on the
host and we now always build your own if a package needs it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/lzma/lzma.mk | 65 +------------------------------------------------
1 files changed, 2 insertions(+), 63 deletions(-)
diff --git a/package/lzma/lzma.mk b/package/lzma/lzma.mk
index c4a735d..9bdcc35 100644
--- a/package/lzma/lzma.mk
+++ b/package/lzma/lzma.mk
@@ -11,67 +11,6 @@ LZMA_INSTALL_TARGET = YES
LZMA_CONF_OPT = $(if $(BR2_ENABLE_DEBUG),--enable-debug,--disable-debug)
$(eval $(call AUTOTARGETS,package,lzma))
+$(eval $(call AUTOTARGETS,package,lzma,host))
-######################################################################
-#
-# lzma host
-#
-######################################################################
-
-LZMA_CAT:=$(ZCAT)
-LZMA_HOST_DIR:=$(TOOLCHAIN_DIR)/lzma-$(LZMA_VERSION)
-
-# lzma binary for use on the host
-LZMA=$(TOOLCHAIN_DIR)/bin/lzma
-HOST_LZMA_BINARY=$(shell package/lzma/lzmacheck.sh)
-HOST_LZMA_IF_ANY=$(shell toolchain/dependencies/check-host-lzma.sh)
-
-$(DL_DIR)/$(LZMA_SOURCE):
- $(call DOWNLOAD,$(LZMA_SITE),$(LZMA_SOURCE))
-
-$(LZMA_HOST_DIR)/.unpacked: $(DL_DIR)/$(LZMA_SOURCE)
- $(LZMA_CAT) $(DL_DIR)/$(LZMA_SOURCE) | tar -C $(TOOLCHAIN_DIR) $(TAR_OPTIONS) -
- toolchain/patch-kernel.sh $(LZMA_HOST_DIR) package/lzma/ lzma\*.patch
- touch $@
-
-$(LZMA_HOST_DIR)/.configured: $(LZMA_HOST_DIR)/.unpacked
- (cd $(LZMA_HOST_DIR); rm -f config.cache;\
- CC="$(HOSTCC)" \
- CXX="$(HOSTCXX)" \
- ./configure $(QUIET) \
- --prefix=/ \
- )
- touch $@
-
-$(LZMA_HOST_DIR)/src/lzma/lzma: $(LZMA_HOST_DIR)/.configured
- $(MAKE) -C $(LZMA_HOST_DIR) all
- touch -c $@
-
-$(STAGING_DIR)/bin/lzma: $(LZMA_HOST_DIR)/src/lzma/lzma
- $(MAKE) DESTDIR=$(STAGING_DIR) -C $(LZMA_HOST_DIR) install
- $(SED) "s,^libdir=.*,libdir=\'$(STAGING_DIR)/lib\',g" \
- $(STAGING_DIR)/lib/liblzmadec.la
-
-.PHONY: lzma-host use-lzma-host-binary
-use-lzma-host-binary:
- if [ ! -f "$(TOOLCHAIN_DIR)/bin/lzma" ]; then \
- [ -d $(TOOLCHAIN_DIR)/bin ] || mkdir -p $(TOOLCHAIN_DIR)/bin; \
- ln -sf "$(HOST_LZMA_IF_ANY)" "$(TOOLCHAIN_DIR)/bin/lzma"; \
- fi
-
-build-lzma-host-binary: $(LZMA_HOST_DIR)/src/lzma/lzma
- -rm -f $(TOOLCHAIN_DIR)/bin/lzma
- [ -d $(TOOLCHAIN_DIR)/bin ] || mkdir $(TOOLCHAIN_DIR)/bin
- cp -pf $(LZMA_HOST_DIR)/src/lzma/lzma $(TOOLCHAIN_DIR)/bin/lzma
-
-host-lzma: $(HOST_LZMA_BINARY)
-
-lzma-host: $(STAGING_DIR)/bin/lzma
-
-lzma-host-clean:
- rm -f $(STAGING_DIR)/bin/lzma
- -$(MAKE) -C $(LZMA_HOST_DIR) clean
-lzma-host-dirclean:
- rm -rf $(LZMA_HOST_DIR)
-
-lzma-host-install: /usr/local/bin/lzma
+LZMA=$(HOST_DIR)/usr/bin/lzma
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 13/44] target/cloop: cleanup
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (11 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 12/44] lzma: convert the host package to the autotools infrastructure Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 14/44] target/cpio: cleanup Thomas Petazzoni
` (32 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Remove the code to build the cloop utilities for the host (it is now
in package/cloop).
Use fakeroot instead of ugly sudo. The cloop filesystem generation
code is now much more similar to other filesystems code.
Remove empty Makefile.in.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/cloop/Makefile.in | 3 -
target/cloop/cloop.mk | 133 +++++++++------------------------------------
2 files changed, 27 insertions(+), 109 deletions(-)
delete mode 100644 target/cloop/Makefile.in
diff --git a/target/cloop/Makefile.in b/target/cloop/Makefile.in
deleted file mode 100644
index 0afc58f..0000000
--- a/target/cloop/Makefile.in
+++ /dev/null
@@ -1,3 +0,0 @@
-ifeq ($(BR2_TARGET_ROOTFS_CLOOP),y)
-TARGETS+=clooproot
-endif
diff --git a/target/cloop/cloop.mk b/target/cloop/cloop.mk
index 059dd6c..ccdb2b4 100644
--- a/target/cloop/cloop.mk
+++ b/target/cloop/cloop.mk
@@ -1,108 +1,29 @@
#############################################################
#
-# mkcloop to build to target cloop filesystems
-#
-#############################################################
-CLOOP_VERSION=2.06
-CLOOP_DIR=$(BUILD_DIR)/cloop-$(CLOOP_VERSION)
-CLOOP_SOURCE=cloop_$(CLOOP_VERSION)-2.tar.gz
-CLOOP_SITE=http://debian-knoppix.alioth.debian.org/sources/
-
-CLOOP_TARGET:=$(IMAGE).cloop
-### Note: not used yet! ck
-### $(DL_DIR)/$(CLOOP_PATCH1):
-### $(call DOWNLOAD,$(CLOOP_PATCH1_URL),$(CLOOP_PATCH1))
-
-$(DL_DIR)/$(CLOOP_SOURCE):
- $(call DOWNLOAD,$(CLOOP_SITE),$(CLOOP_SOURCE))
-
-$(CLOOP_DIR)/.unpacked: $(DL_DIR)/$(CLOOP_SOURCE) ### $(DL_DIR)/$(CLOOP_PATCH1)
- $(ZCAT) $(DL_DIR)/$(CLOOP_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $@
-### $(ZCAT) $(DL_DIR)/$(CLOOP_PATCH1) | patch -p1 -d $(CLOOP_DIR)
-### toolchain/patch-kernel.sh $(CLOOP_DIR) target/cloop/ cloop\*.patch
-
-$(CLOOP_DIR)/create_compressed_fs: $(CLOOP_DIR)/.unpacked
- $(MAKE) CFLAGS="-Wall -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DUSE_ERROR_SILENT" -C $(CLOOP_DIR) \
- APPSONLY=yes -j1
-
-cloop: $(CLOOP_DIR)/create_compressed_fs
-
-cloop-source: $(DL_DIR)/$(CLOOP_SOURCE)
-
-cloop-clean:
- -$(MAKE) -C $(CLOOP_DIR) clean
-
-cloop-dirclean:
- rm -rf $(CLOOP_DIR)
-
-#############################################################
-#
-# Build the cloop.o kernel module for the HOST
-#
-#############################################################
-
-$(CLOOP_DIR)/cloop.o: $(CLOOP_DIR)/create_compressed_fs
- $(MAKE) CFLAGS="-Wall -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DUSE_ERROR_SILENT" -C $(CLOOP_DIR) -j1
-
-cloop-module: $(CLOOP_DIR)/cloop.o
-
-#############################################################
-#
-# Build the cloop root filesystem image
-#
-# Note: we need additionall host tools:
-# required:
-# mkisofs 2.01a34-unofficial-iconv from http://users.utu.fi/jahhein/mkisofs/
-# optional:
-# symlinks: scan/change symbolic links - v1.2 - by Mark Lord
-# from ftp://ftp.ibiblio.org/pub/Linux/utils/file/
-#
-#############################################################
-
-### Note: target/default/device_table.txt is not yet supported! ck
-# the quickfix is to use sudo to mount the previous created cramroot
-check-tools:
- - which symlinks && symlinks -r $(TARGET_DIR)
-
-$(IMAGE).cramfs: cramfsroot
-
-clooproot: cloop check-tools $(IMAGE).cramfs
- ### $(CLOOP_DIR)/create_compressed_fs -q -D target/default/device_table.txt $(TARGET_DIR) $(CLOOP_TARGET)
- ## mkisofs -r $(TARGET_DIR) | $(CLOOP_DIR)/create_compressed_fs - 65536 > $(CLOOP_TARGET)
- sudo mkdir -p /mnt/compressed
- sudo mount -o ro,loop -t cramfs $(IMAGE).cramfs /mnt/compressed
- mkisofs -r /mnt/compressed | $(CLOOP_DIR)/create_compressed_fs - 65536 > $(CLOOP_TARGET)
- - symlinks -r /mnt/compressed
- sudo umount /mnt/compressed
- @echo "Mounting a compressed image:"
- @echo " sudo mkdir -p /mnt/compressed"
- @echo " sudo /sbin/insmod cloop"
- @echo " sudo /sbin/losetup /dev/cloop1 $(CLOOP_TARGET)"
- @echo " sudo mount -o ro -t iso9660 /dev/cloop1 /mnt/compressed"
-
-clooproot-source: cloop-source
-
-clooproot-clean:
- -$(MAKE) -C $(CLOOP_DIR) clean
-
-clooproot-dirclean:
- rm -rf $(CLOOP_DIR)
-
-#############################################################
-# symlinks -r /mnt/compressed
-# dangling: /mnt/compressed/dev/log -> /tmp/log
-# other_fs: /mnt/compressed/etc/mtab -> /proc/mounts
-# other_fs: /mnt/compressed/var/lib/pcmcia -> /tmp
-# other_fs: /mnt/compressed/var/lock -> /tmp
-# other_fs: /mnt/compressed/var/log -> /tmp
-# other_fs: /mnt/compressed/var/pcmcia -> /tmp
-# other_fs: /mnt/compressed/var/run -> /tmp
-# other_fs: /mnt/compressed/var/spool -> /tmp
-# other_fs: /mnt/compressed/var/tmp -> /tmp
-#
-# ls -lrsS root_fs_*.*
-# 1296 -rw-r--r-- 1 claus users 1325478 Mar 13 16:52 root_fs_powerpc.cloop
-# 1448 -rw-r--r-- 1 claus users 1482752 Mar 13 16:52 root_fs_powerpc.cramfs
-# 1840 -rw-r--r-- 1 claus users 1883408 Mar 13 13:14 root_fs_powerpc.jffs2
-#############################################################
+# Build the compressed loop root filesystem image
+#
+#############################################################
+
+CLOOP_TARGET=$(IMAGE).cloop
+CLOOP_FAKEROOT_SCRIPT=$(BUILD_DIR)/_fakeroot.$(notdir $(CLOOP_TARGET))
+
+clooproot: host-cloop host-cdrkit host-fakeroot
+ rm -f $(CLOOP_FAKEROOT_SCRIPT)
+ touch $(BUILD_DIR)/.fakeroot.00000
+ cat $(BUILD_DIR)/.fakeroot* > $(CLOOP_FAKEROOT_SCRIPT)
+ # Use fakeroot to pretend all target binaries are owned by root
+ echo "chown -R 0:0 $(TARGET_DIR)" >> $(CLOOP_FAKEROOT_SCRIPT)
+ifneq ($(TARGET_DEVICE_TABLE),)
+ # Use fakeroot to pretend to create all needed device nodes
+ echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
+ >> $(CLOOP_FAKEROOT_SCRIPT)
+endif
+ # Use fakeroot so genisoimage believes the previous fakery
+ echo "$(HOST_DIR)/usr/bin/genisoimage -r $(TARGET_DIR) | $(HOST_DIR)/usr/bin/create_compressed_fs - 65536 > $(CLOOP_TARGET)" >> $(CLOOP_FAKEROOT_SCRIPT)
+ chmod a+x $(CLOOP_FAKEROOT_SCRIPT)
+ $(HOST_DIR)/usr/bin/fakeroot -- $(CLOOP_FAKEROOT_SCRIPT)
+ - at rm -f $(CLOOP_FAKEROOT_SCRIPT)
+
+ifeq ($(BR2_TARGET_ROOTFS_CLOOP),y)
+TARGETS+=clooproot
+endif
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 14/44] target/cpio: cleanup
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (12 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 13/44] target/cloop: cleanup Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 15/44] target/cramfs: cleanup Thomas Petazzoni
` (31 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
* Remove the dependency on BR2_HOST_FAKEROOT, since we don't have
config option for host tools.
* Remove a few useless things.
* Check that cpio is available on the host in
toolchain/dependencies/dependencies.sh.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/cpio/Config.in | 1 -
target/cpio/cpioroot.mk | 17 +++--------------
toolchain/dependencies/dependencies.sh | 2 +-
3 files changed, 4 insertions(+), 16 deletions(-)
diff --git a/target/cpio/Config.in b/target/cpio/Config.in
index 83bdd21..4ee1037 100644
--- a/target/cpio/Config.in
+++ b/target/cpio/Config.in
@@ -1,6 +1,5 @@
config BR2_TARGET_ROOTFS_CPIO
bool "cpio the root filesystem"
- select BR2_HOST_FAKEROOT
help
Build a cpio archive of the root filesystem
diff --git a/target/cpio/cpioroot.mk b/target/cpio/cpioroot.mk
index 2197d10..021847f 100644
--- a/target/cpio/cpioroot.mk
+++ b/target/cpio/cpioroot.mk
@@ -12,17 +12,15 @@ CPIO_ROOTFS_COMPRESSOR_PREREQ:=
ifeq ($(BR2_TARGET_ROOTFS_CPIO_GZIP),y)
CPIO_ROOTFS_COMPRESSOR:=gzip -9 -c
CPIO_ROOTFS_COMPRESSOR_EXT:=gz
-#CPIO_ROOTFS_COMPRESSOR_PREREQ:= gzip-host
endif
ifeq ($(BR2_TARGET_ROOTFS_CPIO_BZIP2),y)
CPIO_ROOTFS_COMPRESSOR:=bzip2 -9 -c
CPIO_ROOTFS_COMPRESSOR_EXT:=bz2
-#CPIO_ROOTFS_COMPRESSOR_PREREQ:= bzip2-host
endif
ifeq ($(BR2_TARGET_ROOTFS_CPIO_LZMA),y)
-CPIO_ROOTFS_COMPRESSOR:=lzma -9 -c
+CPIO_ROOTFS_COMPRESSOR:=$(LZMA) -9 -c
CPIO_ROOTFS_COMPRESSOR_EXT:=lzma
-CPIO_ROOTFS_COMPRESSOR_PREREQ:= lzma-host
+CPIO_ROOTFS_COMPRESSOR_PREREQ:= host-lzma
endif
ifneq ($(CPIO_ROOTFS_COMPRESSOR),)
@@ -32,7 +30,6 @@ CPIO_TARGET := $(CPIO_BASE)
endif
ROOTFS_CPIO_COPYTO:=$(call qstrip,$(BR2_TARGET_ROOTFS_CPIO_COPYTO))
-#
cpioroot-init:
rm -f $(TARGET_DIR)/init
@@ -54,7 +51,7 @@ endif
>> $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
$(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
- #- at rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
+ - at rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
ifeq ($(CPIO_ROOTFS_COMPRESSOR),)
ifneq ($(ROOTFS_CPIO_COPYTO),)
$(Q)cp -f $(CPIO_BASE) $(ROOTFS_CPIO_COPYTO)
@@ -69,14 +66,6 @@ ifneq ($(ROOTFS_CPIO_COPYTO),)
endif
endif
-cpioroot: $(CPIO_TARGET)
-
-cpioroot-source:
-
-cpioroot-clean:
-
-cpioroot-dirclean:
-
#############################################################
#
# Toplevel Makefile options
diff --git a/toolchain/dependencies/dependencies.sh b/toolchain/dependencies/dependencies.sh
index 68b2751..013c1d5 100755
--- a/toolchain/dependencies/dependencies.sh
+++ b/toolchain/dependencies/dependencies.sh
@@ -122,7 +122,7 @@ if ! $SHELL --version 2>&1 | grep -q '^GNU bash'; then
fi;
# Check that a few mandatory programs are installed
-for prog in awk bison flex msgfmt makeinfo patch gzip bzip2 perl tar wget ; do
+for prog in awk bison flex msgfmt makeinfo patch gzip bzip2 perl tar wget cpio ; do
if ! which $prog > /dev/null ; then
/bin/echo -e "\nYou must install '$prog' on your build machine";
if test $prog = "makeinfo" ; then
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 15/44] target/cramfs: cleanup
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (13 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 14/44] target/cpio: cleanup Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 16/44] target/ext2: cleanup Thomas Petazzoni
` (30 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Remove the cramfs host tools building process, which is now in
package/cramfs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/cramfs/Config.in | 1 -
target/cramfs/cramfs-01-devtable.patch | 1269 -------------------------------
target/cramfs/cramfs-02-endian.patch | 284 -------
target/cramfs/cramfs-03-cygwin_IO.patch | 13 -
target/cramfs/cramfs.mk | 47 +--
5 files changed, 2 insertions(+), 1612 deletions(-)
delete mode 100644 target/cramfs/cramfs-01-devtable.patch
delete mode 100644 target/cramfs/cramfs-02-endian.patch
delete mode 100644 target/cramfs/cramfs-03-cygwin_IO.patch
diff --git a/target/cramfs/Config.in b/target/cramfs/Config.in
index 0c1cb78..1a4e326 100644
--- a/target/cramfs/Config.in
+++ b/target/cramfs/Config.in
@@ -1,6 +1,5 @@
config BR2_TARGET_ROOTFS_CRAMFS
bool "cramfs root filesystem"
- select BR2_HOST_FAKEROOT
help
Build a cramfs root filesystem
diff --git a/target/cramfs/cramfs-01-devtable.patch b/target/cramfs/cramfs-01-devtable.patch
deleted file mode 100644
index 884eb8c..0000000
--- a/target/cramfs/cramfs-01-devtable.patch
+++ /dev/null
@@ -1,1269 +0,0 @@
---- cramfs-1.1.orig/cramfsck.c 2002-02-22 17:00:42.000000000 -0700
-+++ cramfs-1.1/cramfsck.c 2002-12-21 01:25:17.000000000 -0700
-@@ -51,10 +51,11 @@
- #include <utime.h>
- #include <sys/ioctl.h>
- #define _LINUX_STRING_H_
--#include <linux/fs.h>
--#include <linux/cramfs_fs.h>
-+#include "linux/cramfs_fs.h"
- #include <zlib.h>
-
-+#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */
-+
- /* Exit codes used by fsck-type programs */
- #define FSCK_OK 0 /* No errors */
- #define FSCK_NONDESTRUCT 1 /* File system errors corrected */
-@@ -75,7 +76,7 @@
- static int opt_verbose = 0; /* 1 = verbose (-v), 2+ = very verbose (-vv) */
- #ifdef INCLUDE_FS_TESTS
- static int opt_extract = 0; /* extract cramfs (-x) */
--static char *extract_dir = "root"; /* extraction directory (-x) */
-+static char *extract_dir = "/"; /* extraction directory (-x) */
- static uid_t euid; /* effective UID */
-
- /* (cramfs_super + start) <= start_dir < end_dir <= start_data <= end_data */
-@@ -155,7 +156,7 @@
- }
-
- if (*length < sizeof(struct cramfs_super)) {
-- die(FSCK_UNCORRECTED, 0, "file length too short");
-+ die(FSCK_UNCORRECTED, 0, "filesystem smaller than a cramfs superblock!");
- }
-
- /* find superblock */
-@@ -190,7 +191,8 @@
- die(FSCK_UNCORRECTED, 0, "zero file count");
- }
- if (*length < super.size) {
-- die(FSCK_UNCORRECTED, 0, "file length too short");
-+ die(FSCK_UNCORRECTED, 0, "file length too short, %lu is smaller than %lu",
-+ *length, super.size);
- }
- else if (*length > super.size) {
- fprintf(stderr, "warning: file extends past end of filesystem\n");
-@@ -267,11 +269,11 @@
- #ifdef INCLUDE_FS_TESTS
- static void print_node(char type, struct cramfs_inode *i, char *name)
- {
-- char info[10];
-+ char info[11];
-
- if (S_ISCHR(i->mode) || (S_ISBLK(i->mode))) {
- /* major/minor numbers can be as high as 2^12 or 4096 */
-- snprintf(info, 10, "%4d,%4d", major(i->size), minor(i->size));
-+ snprintf(info, 11, "%4d,%4d", major(i->size), minor(i->size));
- }
- else {
- /* size be as high as 2^24 or 16777216 */
-@@ -445,8 +447,10 @@
- }
- /* TODO: Do we need to check end_dir for empty case? */
- memcpy(newpath, path, pathlen);
-- newpath[pathlen] = '/';
-- pathlen++;
-+ if (pathlen > 1) {
-+ newpath[pathlen] = '/';
-+ pathlen++;
-+ }
- if (opt_verbose) {
- print_node('d', i, path);
- }
---- cramfs-1.1.orig/device_table.txt 1969-12-31 17:00:00.000000000 -0700
-+++ cramfs-1.1/device_table.txt 2003-01-01 05:13:44.000000000 -0700
-@@ -0,0 +1,129 @@
-+# When building a target filesystem, it is desirable to not have to
-+# become root and then run 'mknod' a thousand times. Using a device
-+# table you can create device nodes and directories "on the fly".
-+#
-+# This is a sample device table file for use with mkcramfs. You can
-+# do all sorts of interesting things with a device table file. For
-+# example, if you want to adjust the permissions on a particular file
-+# you can just add an entry like:
-+# /sbin/foobar f 2755 0 0 - - - - -
-+# and (assuming the file /sbin/foobar exists) it will be made setuid
-+# root (regardless of what its permissions are on the host filesystem.
-+# Furthermore, you can use a single table entry to create a many device
-+# minors. For example, if I wanted to create /dev/hda and /dev/hda[0-15]
-+# I could just use the following two table entries:
-+# /dev/hda b 640 0 0 3 0 0 0 -
-+# /dev/hda b 640 0 0 3 1 1 1 15
-+#
-+# Device table entries take the form of:
-+# <name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-+# where name is the file name, type can be one of:
-+# f A regular file
-+# d Directory
-+# c Character special device file
-+# b Block special device file
-+# p Fifo (named pipe)
-+# uid is the user id for the target file, gid is the group id for the
-+# target file. The rest of the entries (major, minor, etc) apply only
-+# to device special files.
-+
-+# Have fun
-+# -Erik Andersen <andersen@codepoet.org>
-+#
-+
-+#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-+/dev d 755 0 0 - - - - -
-+/dev/mem c 640 0 0 1 1 0 0 -
-+/dev/kmem c 640 0 0 1 2 0 0 -
-+/dev/null c 640 0 0 1 3 0 0 -
-+/dev/zero c 640 0 0 1 5 0 0 -
-+/dev/random c 640 0 0 1 8 0 0 -
-+/dev/urandom c 640 0 0 1 9 0 0 -
-+/dev/tty c 666 0 0 5 0 0 0 -
-+/dev/tty c 666 0 0 4 0 0 1 6
-+/dev/console c 640 0 0 5 1 0 0 -
-+/dev/ram b 640 0 0 1 1 0 0 -
-+/dev/ram b 640 0 0 1 0 0 1 4
-+/dev/loop b 640 0 0 7 0 0 1 2
-+/dev/ptmx c 666 0 0 5 2 0 0 -
-+#/dev/ttyS c 640 0 0 4 64 0 1 4
-+#/dev/psaux c 640 0 0 10 1 0 0 -
-+#/dev/rtc c 640 0 0 10 135 0 0 -
-+
-+# Adjust permissions on some normal files
-+#/etc/shadow f 600 0 0 - - - - -
-+#/bin/tinylogin f 4755 0 0 - - - - -
-+
-+# User-mode Linux stuff
-+/dev/ubda b 640 0 0 98 0 0 0 -
-+/dev/ubda b 640 0 0 98 1 1 1 15
-+
-+# IDE Devices
-+/dev/hda b 640 0 0 3 0 0 0 -
-+/dev/hda b 640 0 0 3 1 1 1 15
-+/dev/hdb b 640 0 0 3 64 0 0 -
-+/dev/hdb b 640 0 0 3 65 1 1 15
-+#/dev/hdc b 640 0 0 22 0 0 0 -
-+#/dev/hdc b 640 0 0 22 1 1 1 15
-+#/dev/hdd b 640 0 0 22 64 0 0 -
-+#/dev/hdd b 640 0 0 22 65 1 1 15
-+#/dev/hde b 640 0 0 33 0 0 0 -
-+#/dev/hde b 640 0 0 33 1 1 1 15
-+#/dev/hdf b 640 0 0 33 64 0 0 -
-+#/dev/hdf b 640 0 0 33 65 1 1 15
-+#/dev/hdg b 640 0 0 34 0 0 0 -
-+#/dev/hdg b 640 0 0 34 1 1 1 15
-+#/dev/hdh b 640 0 0 34 64 0 0 -
-+#/dev/hdh b 640 0 0 34 65 1 1 15
-+
-+# SCSI Devices
-+#/dev/sda b 640 0 0 8 0 0 0 -
-+#/dev/sda b 640 0 0 8 1 1 1 15
-+#/dev/sdb b 640 0 0 8 16 0 0 -
-+#/dev/sdb b 640 0 0 8 17 1 1 15
-+#/dev/sdc b 640 0 0 8 32 0 0 -
-+#/dev/sdc b 640 0 0 8 33 1 1 15
-+#/dev/sdd b 640 0 0 8 48 0 0 -
-+#/dev/sdd b 640 0 0 8 49 1 1 15
-+#/dev/sde b 640 0 0 8 64 0 0 -
-+#/dev/sde b 640 0 0 8 65 1 1 15
-+#/dev/sdf b 640 0 0 8 80 0 0 -
-+#/dev/sdf b 640 0 0 8 81 1 1 15
-+#/dev/sdg b 640 0 0 8 96 0 0 -
-+#/dev/sdg b 640 0 0 8 97 1 1 15
-+#/dev/sdh b 640 0 0 8 112 0 0 -
-+#/dev/sdh b 640 0 0 8 113 1 1 15
-+#/dev/sg c 640 0 0 21 0 0 1 15
-+#/dev/scd b 640 0 0 11 0 0 1 15
-+#/dev/st c 640 0 0 9 0 0 1 8
-+#/dev/nst c 640 0 0 9 128 0 1 8
-+#/dev/st c 640 0 0 9 32 1 1 4
-+#/dev/st c 640 0 0 9 64 1 1 4
-+#/dev/st c 640 0 0 9 96 1 1 4
-+
-+# Floppy disk devices
-+#/dev/fd b 640 0 0 2 0 0 1 2
-+#/dev/fd0d360 b 640 0 0 2 4 0 0 -
-+#/dev/fd1d360 b 640 0 0 2 5 0 0 -
-+#/dev/fd0h1200 b 640 0 0 2 8 0 0 -
-+#/dev/fd1h1200 b 640 0 0 2 9 0 0 -
-+#/dev/fd0u1440 b 640 0 0 2 28 0 0 -
-+#/dev/fd1u1440 b 640 0 0 2 29 0 0 -
-+#/dev/fd0u2880 b 640 0 0 2 32 0 0 -
-+#/dev/fd1u2880 b 640 0 0 2 33 0 0 -
-+
-+# All the proprietary cdrom devices in the world
-+#/dev/aztcd b 640 0 0 29 0 0 0 -
-+#/dev/bpcd b 640 0 0 41 0 0 0 -
-+#/dev/capi20 c 640 0 0 68 0 0 1 2
-+#/dev/cdu31a b 640 0 0 15 0 0 0 -
-+#/dev/cdu535 b 640 0 0 24 0 0 0 -
-+#/dev/cm206cd b 640 0 0 32 0 0 0 -
-+#/dev/sjcd b 640 0 0 18 0 0 0 -
-+#/dev/sonycd b 640 0 0 15 0 0 0 -
-+#/dev/gscd b 640 0 0 16 0 0 0 -
-+#/dev/sbpcd b 640 0 0 25 0 0 0 -
-+#/dev/sbpcd b 640 0 0 25 0 0 1 4
-+#/dev/mcd b 640 0 0 23 0 0 0 -
-+#/dev/optcd b 640 0 0 17 0 0 0 -
-+
---- cramfs-1.1.orig/mkcramfs.c 2002-02-20 01:03:32.000000000 -0700
-+++ cramfs-1.1/mkcramfs.c 2002-12-21 01:25:17.000000000 -0700
-@@ -1,3 +1,4 @@
-+/* vi: set sw=8 ts=8: */
- /*
- * mkcramfs - make a cramfs file system
- *
-@@ -16,12 +17,21 @@
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ * Added device table support (code taken from mkfs.jffs2.c, credit to
-+ * Erik Andersen <andersen@codepoet.org>) as well as an option to squash
-+ * permissions. - Russ Dill <Russ.Dill@asu.edu> September 2002
-+ *
-+ * Reworked, cleaned up, and updated for cramfs-1.1, December 2002
-+ * - Erik Andersen <andersen@codepoet.org>
-+ *
- */
-
- /*
- * If you change the disk format of cramfs, please update fs/cramfs/README.
- */
-
-+#define _GNU_SOURCE
- #include <sys/types.h>
- #include <stdio.h>
- #include <sys/stat.h>
-@@ -33,8 +43,15 @@
- #include <errno.h>
- #include <string.h>
- #include <stdarg.h>
-+#include <libgen.h>
-+#include <ctype.h>
-+#include <assert.h>
-+#include <getopt.h>
- #include <linux/cramfs_fs.h>
- #include <zlib.h>
-+#ifdef DMALLOC
-+#include <dmalloc.h>
-+#endif
-
- /* Exit codes used by mkfs-type programs */
- #define MKFS_OK 0 /* No errors */
-@@ -71,11 +88,17 @@
- + (1 << CRAMFS_SIZE_WIDTH) - 1 /* filesize */ \
- + (1 << CRAMFS_SIZE_WIDTH) * 4 / PAGE_CACHE_SIZE /* block pointers */ )
-
-+
-+/* The kernel assumes PAGE_CACHE_SIZE as block size. */
-+#define PAGE_CACHE_SIZE (4096)
-+
-+
- static const char *progname = "mkcramfs";
- static unsigned int blksize = PAGE_CACHE_SIZE;
- static long total_blocks = 0, total_nodes = 1; /* pre-count the root node */
- static int image_length = 0;
-
-+
- /*
- * If opt_holes is set, then mkcramfs can create explicit holes in the
- * data, which saves 26 bytes per hole (which is a lot smaller a
-@@ -91,10 +114,12 @@
- static int opt_holes = 0;
- static int opt_pad = 0;
- static int opt_verbose = 0;
-+static int opt_squash = 0;
- static char *opt_image = NULL;
- static char *opt_name = NULL;
-
- static int warn_dev, warn_gid, warn_namelen, warn_skip, warn_size, warn_uid;
-+static const char *const memory_exhausted = "memory exhausted";
-
- /* In-core version of inode / directory entry. */
- struct entry {
-@@ -123,7 +148,7 @@
- {
- FILE *stream = status ? stderr : stdout;
-
-- fprintf(stream, "usage: %s [-h] [-e edition] [-i file] [-n name] dirname outfile\n"
-+ fprintf(stream, "usage: %s [-h] [-e edition] [-i file] [-n name] [-D file] dirname outfile\n"
- " -h print this help\n"
- " -E make all warnings errors (non-zero exit status)\n"
- " -e edition set edition number (part of fsid)\n"
-@@ -133,39 +158,157 @@
- " -s sort directory entries (old option, ignored)\n"
- " -v be more verbose\n"
- " -z make explicit holes (requires >= 2.3.39)\n"
-- " dirname root of the directory tree to be compressed\n"
-+ " -D Use the named FILE as a device table file\n"
-+ " -q squash permissions (make everything owned by root)\n"
-+ " dirname root of the filesystem to be compressed\n"
- " outfile output file\n", progname, PAD_SIZE);
-
- exit(status);
- }
-
--static void die(int status, int syserr, const char *fmt, ...)
-+static void verror_msg(const char *s, va_list p)
-+{
-+ fflush(stdout);
-+ fprintf(stderr, "mkcramfs: ");
-+ vfprintf(stderr, s, p);
-+}
-+
-+static void vperror_msg(const char *s, va_list p)
-+{
-+ int err = errno;
-+
-+ if (s == 0)
-+ s = "";
-+ verror_msg(s, p);
-+ if (*s)
-+ s = ": ";
-+ fprintf(stderr, "%s%s\n", s, strerror(err));
-+}
-+
-+static void perror_msg(const char *s, ...)
-+{
-+ va_list p;
-+
-+ va_start(p, s);
-+ vperror_msg(s, p);
-+ va_end(p);
-+}
-+
-+static void error_msg_and_die(const char *s, ...)
-+{
-+ va_list p;
-+
-+ va_start(p, s);
-+ verror_msg(s, p);
-+ va_end(p);
-+ putc('\n', stderr);
-+ exit(MKFS_ERROR);
-+}
-+
-+static void perror_msg_and_die(const char *s, ...)
-+{
-+ va_list p;
-+
-+ va_start(p, s);
-+ vperror_msg(s, p);
-+ va_end(p);
-+ exit(MKFS_ERROR);
-+}
-+#ifndef DMALLOC
-+extern char *xstrdup(const char *s)
-+{
-+ char *t;
-+
-+ if (s == NULL)
-+ return NULL;
-+ t = strdup(s);
-+ if (t == NULL)
-+ error_msg_and_die(memory_exhausted);
-+ return t;
-+}
-+
-+extern void *xmalloc(size_t size)
-+{
-+ void *ptr = malloc(size);
-+
-+ if (ptr == NULL && size != 0)
-+ error_msg_and_die(memory_exhausted);
-+ return ptr;
-+}
-+
-+extern void *xcalloc(size_t nmemb, size_t size)
-+{
-+ void *ptr = calloc(nmemb, size);
-+
-+ if (ptr == NULL && nmemb != 0 && size != 0)
-+ error_msg_and_die(memory_exhausted);
-+ return ptr;
-+}
-+
-+extern void *xrealloc(void *ptr, size_t size)
-+{
-+ ptr = realloc(ptr, size);
-+ if (ptr == NULL && size != 0)
-+ error_msg_and_die(memory_exhausted);
-+ return ptr;
-+}
-+#endif
-+
-+static FILE *xfopen(const char *path, const char *mode)
- {
-- va_list arg_ptr;
-- int save = errno;
-+ FILE *fp;
-+
-+ if ((fp = fopen(path, mode)) == NULL)
-+ perror_msg_and_die("%s", path);
-+ return fp;
-+}
-
-- fflush(0);
-- va_start(arg_ptr, fmt);
-- fprintf(stderr, "%s: ", progname);
-- vfprintf(stderr, fmt, arg_ptr);
-- if (syserr) {
-- fprintf(stderr, ": %s", strerror(save));
-+extern int xopen(const char *pathname, int flags, mode_t mode)
-+{
-+ int ret;
-+
-+ if (flags & O_CREAT)
-+ ret = open(pathname, flags, mode);
-+ else
-+ ret = open(pathname, flags);
-+ if (ret == -1) {
-+ perror_msg_and_die("%s", pathname);
- }
-- fprintf(stderr, "\n");
-- va_end(arg_ptr);
-- exit(status);
-+ return ret;
- }
-
-+extern char *xreadlink(const char *path)
-+{
-+ static const int GROWBY = 80; /* how large we will grow strings by */
-+
-+ char *buf = NULL;
-+ int bufsize = 0, readsize = 0;
-+
-+ do {
-+ buf = xrealloc(buf, bufsize += GROWBY);
-+ readsize = readlink(path, buf, bufsize); /* 1st try */
-+ if (readsize == -1) {
-+ perror_msg("%s:%s", progname, path);
-+ return NULL;
-+ }
-+ }
-+ while (bufsize < readsize + 1);
-+
-+ buf[readsize] = '\0';
-+
-+ return buf;
-+}
-+
- static void map_entry(struct entry *entry)
- {
- if (entry->path) {
- entry->fd = open(entry->path, O_RDONLY);
- if (entry->fd < 0) {
-- die(MKFS_ERROR, 1, "open failed: %s", entry->path);
-+ error_msg_and_die("open failed: %s", entry->path);
- }
- entry->uncompressed = mmap(NULL, entry->size, PROT_READ, MAP_PRIVATE, entry->fd, 0);
- if (entry->uncompressed == MAP_FAILED) {
-- die(MKFS_ERROR, 1, "mmap failed: %s", entry->path);
-+ error_msg_and_die("mmap failed: %s", entry->path);
- }
- }
- }
-@@ -174,8 +317,9 @@
- {
- if (entry->path) {
- if (munmap(entry->uncompressed, entry->size) < 0) {
-- die(MKFS_ERROR, 1, "munmap failed: %s", entry->path);
-+ error_msg_and_die("munmap failed: %s", entry->path);
- }
-+ entry->uncompressed=NULL;
- close(entry->fd);
- }
- }
-@@ -204,7 +348,8 @@
- find_identical_file(orig->next, newfile));
- }
-
--static void eliminate_doubles(struct entry *root, struct entry *orig) {
-+static void eliminate_doubles(struct entry *root, struct entry *orig)
-+{
- if (orig) {
- if (orig->size && (orig->path || orig->uncompressed))
- find_identical_file(root, orig);
-@@ -232,10 +377,7 @@
-
- /* Set up the path. */
- /* TODO: Reuse the parent's buffer to save memcpy'ing and duplication. */
-- path = malloc(len + 1 + MAX_INPUT_NAMELEN + 1);
-- if (!path) {
-- die(MKFS_ERROR, 1, "malloc failed");
-- }
-+ path = xmalloc(len + 1 + MAX_INPUT_NAMELEN + 1);
- memcpy(path, name, len);
- endpath = path + len;
- *endpath = '/';
-@@ -245,7 +387,7 @@
- dircount = scandir(name, &dirlist, 0, cramsort);
-
- if (dircount < 0) {
-- die(MKFS_ERROR, 1, "scandir failed: %s", name);
-+ error_msg_and_die("scandir failed: %s", name);
- }
-
- /* process directory */
-@@ -269,25 +411,20 @@
- }
- namelen = strlen(dirent->d_name);
- if (namelen > MAX_INPUT_NAMELEN) {
-- die(MKFS_ERROR, 0,
-- "very long (%u bytes) filename found: %s\n"
-- "please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile",
-+ error_msg_and_die(
-+ "Very long (%u bytes) filename `%s' found.\n"
-+ " Please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile. Exiting.\n",
- namelen, dirent->d_name);
- }
- memcpy(endpath, dirent->d_name, namelen + 1);
-
- if (lstat(path, &st) < 0) {
-+ perror(endpath);
- warn_skip = 1;
- continue;
- }
-- entry = calloc(1, sizeof(struct entry));
-- if (!entry) {
-- die(MKFS_ERROR, 1, "calloc failed");
-- }
-- entry->name = strdup(dirent->d_name);
-- if (!entry->name) {
-- die(MKFS_ERROR, 1, "strdup failed");
-- }
-+ entry = xcalloc(1, sizeof(struct entry));
-+ entry->name = xstrdup(dirent->d_name);
- /* truncate multi-byte UTF-8 filenames on character boundary */
- if (namelen > CRAMFS_MAXPATHLEN) {
- namelen = CRAMFS_MAXPATHLEN;
-@@ -297,24 +434,25 @@
- namelen--;
- /* are we reasonably certain it was UTF-8 ? */
- if (entry->name[namelen] < 0x80 || !namelen) {
-- die(MKFS_ERROR, 0, "cannot truncate filenames not encoded in UTF-8");
-+ error_msg_and_die("cannot truncate filenames not encoded in UTF-8");
- }
- }
- entry->name[namelen] = '\0';
- }
- entry->mode = st.st_mode;
- entry->size = st.st_size;
-- entry->uid = st.st_uid;
-+ entry->uid = opt_squash ? 0 : st.st_uid;
- if (entry->uid >= 1 << CRAMFS_UID_WIDTH)
- warn_uid = 1;
-- entry->gid = st.st_gid;
-- if (entry->gid >= 1 << CRAMFS_GID_WIDTH)
-+ entry->gid = opt_squash ? 0 : st.st_gid;
-+ if (entry->gid >= 1 << CRAMFS_GID_WIDTH) {
- /* TODO: We ought to replace with a default
- gid instead of truncating; otherwise there
- are security problems. Maybe mode should
- be &= ~070. Same goes for uid once Linux
- supports >16-bit uids. */
- warn_gid = 1;
-+ }
- size = sizeof(struct cramfs_inode) + ((namelen + 3) & ~3);
- *fslen_ub += size;
- if (S_ISDIR(st.st_mode)) {
-@@ -325,21 +463,15 @@
- warn_skip = 1;
- continue;
- }
-- entry->path = strdup(path);
-- if (!entry->path) {
-- die(MKFS_ERROR, 1, "strdup failed");
-- }
-+ entry->path = xstrdup(path);
- if ((entry->size >= 1 << CRAMFS_SIZE_WIDTH)) {
- warn_size = 1;
- entry->size = (1 << CRAMFS_SIZE_WIDTH) - 1;
- }
- }
- } else if (S_ISLNK(st.st_mode)) {
-- entry->uncompressed = malloc(entry->size);
-+ entry->uncompressed = xreadlink(path);
- if (!entry->uncompressed) {
-- die(MKFS_ERROR, 1, "malloc failed");
-- }
-- if (readlink(path, entry->uncompressed, entry->size) < 0) {
- warn_skip = 1;
- continue;
- }
-@@ -351,7 +483,7 @@
- if (entry->size & -(1<<CRAMFS_SIZE_WIDTH))
- warn_dev = 1;
- } else {
-- die(MKFS_ERROR, 0, "bogus file type: %s", entry->name);
-+ error_msg_and_die("bogus file type: %s", entry->name);
- }
-
- if (S_ISREG(st.st_mode) || S_ISLNK(st.st_mode)) {
-@@ -378,7 +510,9 @@
- struct cramfs_super *super = (struct cramfs_super *) base;
- unsigned int offset = sizeof(struct cramfs_super) + image_length;
-
-- offset += opt_pad; /* 0 if no padding */
-+ if (opt_pad) {
-+ offset += opt_pad; /* 0 if no padding */
-+ }
-
- super->magic = CRAMFS_MAGIC;
- super->flags = CRAMFS_FLAG_FSID_VERSION_2 | CRAMFS_FLAG_SORTED_DIRS;
-@@ -414,10 +548,10 @@
- struct cramfs_inode *inode = (struct cramfs_inode *) (base + entry->dir_offset);
-
- if ((offset & 3) != 0) {
-- die(MKFS_ERROR, 0, "illegal offset of %lu bytes", offset);
-+ error_msg_and_die("illegal offset of %lu bytes", offset);
- }
- if (offset >= (1 << (2 + CRAMFS_OFFSET_WIDTH))) {
-- die(MKFS_ERROR, 0, "filesystem too big");
-+ error_msg_and_die("filesystem too big");
- }
- inode->offset = (offset >> 2);
- }
-@@ -429,7 +563,7 @@
- */
- static void print_node(struct entry *e)
- {
-- char info[10];
-+ char info[12];
- char type = '?';
-
- if (S_ISREG(e->mode)) type = 'f';
-@@ -442,11 +576,11 @@
-
- if (S_ISCHR(e->mode) || (S_ISBLK(e->mode))) {
- /* major/minor numbers can be as high as 2^12 or 4096 */
-- snprintf(info, 10, "%4d,%4d", major(e->size), minor(e->size));
-+ snprintf(info, 11, "%4d,%4d", major(e->size), minor(e->size));
- }
- else {
- /* size be as high as 2^24 or 16777216 */
-- snprintf(info, 10, "%9d", e->size);
-+ snprintf(info, 11, "%9d", e->size);
- }
-
- printf("%c %04o %s %5d:%-3d %s\n",
-@@ -462,17 +596,9 @@
- {
- int stack_entries = 0;
- int stack_size = 64;
-- struct entry **entry_stack;
--
-- entry_stack = malloc(stack_size * sizeof(struct entry *));
-- if (!entry_stack) {
-- die(MKFS_ERROR, 1, "malloc failed");
-- }
--
-- if (opt_verbose) {
-- printf("root:\n");
-- }
-+ struct entry **entry_stack = NULL;
-
-+ entry_stack = xmalloc(stack_size * sizeof(struct entry *));
- for (;;) {
- int dir_start = stack_entries;
- while (entry) {
-@@ -506,10 +632,7 @@
- if (entry->child) {
- if (stack_entries >= stack_size) {
- stack_size *= 2;
-- entry_stack = realloc(entry_stack, stack_size * sizeof(struct entry *));
-- if (!entry_stack) {
-- die(MKFS_ERROR, 1, "realloc failed");
-- }
-+ entry_stack = xrealloc(entry_stack, stack_size * sizeof(struct entry *));
- }
- entry_stack[stack_entries] = entry;
- stack_entries++;
-@@ -543,7 +666,7 @@
-
- set_data_offset(entry, base, offset);
- if (opt_verbose) {
-- printf("%s:\n", entry->name);
-+ printf("'%s':\n", entry->name);
- }
- entry = entry->child;
- }
-@@ -553,16 +676,21 @@
-
- static int is_zero(char const *begin, unsigned len)
- {
-- /* Returns non-zero iff the first LEN bytes from BEGIN are all NULs. */
-- return (len-- == 0 ||
-- (begin[0] == '\0' &&
-- (len-- == 0 ||
-- (begin[1] == '\0' &&
-- (len-- == 0 ||
-- (begin[2] == '\0' &&
-- (len-- == 0 ||
-- (begin[3] == '\0' &&
-- memcmp(begin, begin + 4, len) == 0))))))));
-+ if (opt_holes)
-+ /* Returns non-zero iff the first LEN bytes from BEGIN are
-+ all NULs. */
-+ return (len-- == 0 ||
-+ (begin[0] == '\0' &&
-+ (len-- == 0 ||
-+ (begin[1] == '\0' &&
-+ (len-- == 0 ||
-+ (begin[2] == '\0' &&
-+ (len-- == 0 ||
-+ (begin[3] == '\0' &&
-+ memcmp(begin, begin + 4, len) == 0))))))));
-+ else
-+ /* Never create holes. */
-+ return 0;
- }
-
- /*
-@@ -575,37 +703,34 @@
- * Note that size > 0, as a zero-sized file wouldn't ever
- * have gotten here in the first place.
- */
--static unsigned int do_compress(char *base, unsigned int offset, char const *name, char *uncompressed, unsigned int size)
-+static unsigned int do_compress(char *base, unsigned int offset, struct entry *entry)
- {
-+ unsigned int size = entry->size;
- unsigned long original_size = size;
- unsigned long original_offset = offset;
- unsigned long new_size;
- unsigned long blocks = (size - 1) / blksize + 1;
- unsigned long curr = offset + 4 * blocks;
- int change;
-+ char *uncompressed = entry->uncompressed;
-
-- total_blocks += blocks;
-+ total_blocks += blocks;
-
- do {
- unsigned long len = 2 * blksize;
- unsigned int input = size;
-- int err;
--
- if (input > blksize)
- input = blksize;
- size -= input;
-- if (!(opt_holes && is_zero (uncompressed, input))) {
-- err = compress2(base + curr, &len, uncompressed, input, Z_BEST_COMPRESSION);
-- if (err != Z_OK) {
-- die(MKFS_ERROR, 0, "compression error: %s", zError(err));
-- }
-+ if (!is_zero (uncompressed, input)) {
-+ compress(base + curr, &len, uncompressed, input);
- curr += len;
- }
- uncompressed += input;
-
- if (len > blksize*2) {
- /* (I don't think this can happen with zlib.) */
-- die(MKFS_ERROR, 0, "AIEEE: block \"compressed\" to > 2*blocklength (%ld)", len);
-+ error_msg_and_die("AIEEE: block \"compressed\" to > 2*blocklength (%ld)\n", len);
- }
-
- *(u32 *) (base + offset) = curr;
-@@ -618,10 +743,12 @@
- st_blocks * 512. But if you say that then perhaps
- administrative data should also be included in both. */
- change = new_size - original_size;
-- if (opt_verbose > 1) {
-- printf("%6.2f%% (%+d bytes)\t%s\n",
-- (change * 100) / (double) original_size, change, name);
-+#if 0
-+ if (opt_verbose) {
-+ printf("%6.2f%% (%+d bytes)\t%s\n",
-+ (change * 100) / (double) original_size, change, entry->name);
- }
-+#endif
-
- return curr;
- }
-@@ -644,7 +771,7 @@
- set_data_offset(entry, base, offset);
- entry->offset = offset;
- map_entry(entry);
-- offset = do_compress(base, offset, entry->name, entry->uncompressed, entry->size);
-+ offset = do_compress(base, offset, entry);
- unmap_entry(entry);
- }
- }
-@@ -660,13 +787,10 @@
- int fd;
- char *buf;
-
-- fd = open(file, O_RDONLY);
-- if (fd < 0) {
-- die(MKFS_ERROR, 1, "open failed: %s", file);
-- }
-+ fd = xopen(file, O_RDONLY, 0);
- buf = mmap(NULL, image_length, PROT_READ, MAP_PRIVATE, fd, 0);
- if (buf == MAP_FAILED) {
-- die(MKFS_ERROR, 1, "mmap failed");
-+ error_msg_and_die("mmap failed");
- }
- memcpy(base + offset, buf, image_length);
- munmap(buf, image_length);
-@@ -679,6 +803,328 @@
- return (offset + image_length);
- }
-
-+static struct entry *find_filesystem_entry(struct entry *dir, char *name, mode_t type)
-+{
-+ struct entry *e = dir;
-+
-+ if (S_ISDIR(dir->mode)) {
-+ e = dir->child;
-+ }
-+ while (e) {
-+ /* Only bother to do the expensive strcmp on matching file types */
-+ if (type == (e->mode & S_IFMT) && e->name) {
-+ if (S_ISDIR(e->mode)) {
-+ int len = strlen(e->name);
-+
-+ /* Check if we are a parent of the correct path */
-+ if (strncmp(e->name, name, len) == 0) {
-+ /* Is this an _exact_ match? */
-+ if (strcmp(name, e->name) == 0) {
-+ return (e);
-+ }
-+ /* Looks like we found a parent of the correct path */
-+ if (name[len] == '/') {
-+ if (e->child) {
-+ return (find_filesystem_entry (e, name + len + 1, type));
-+ } else {
-+ return NULL;
-+ }
-+ }
-+ }
-+ } else {
-+ if (strcmp(name, e->name) == 0) {
-+ return (e);
-+ }
-+ }
-+ }
-+ e = e->next;
-+ }
-+ return (NULL);
-+}
-+
-+void modify_entry(char *full_path, unsigned long uid, unsigned long gid,
-+ unsigned long mode, unsigned long rdev, struct entry *root, loff_t *fslen_ub)
-+{
-+ char *name, *path, *full;
-+ struct entry *curr, *parent, *entry, *prev;
-+
-+ full = xstrdup(full_path);
-+ path = xstrdup(dirname(full));
-+ name = full_path + strlen(path) + 1;
-+ free(full);
-+ if (strcmp(path, "/") == 0) {
-+ parent = root;
-+ name = full_path + 1;
-+ } else {
-+ if (!(parent = find_filesystem_entry(root, path+1, S_IFDIR)))
-+ error_msg_and_die("%s/%s: could not find parent\n", path, name);
-+ }
-+ if ((entry = find_filesystem_entry(parent, name, (mode & S_IFMT)))) {
-+ /* its there, just modify permissions */
-+ entry->mode = mode;
-+ entry->uid = uid;
-+ entry->gid = gid;
-+ } else { /* make a new entry */
-+
-+ /* code partially replicated from parse_directory() */
-+ size_t namelen;
-+ if (S_ISREG(mode)) {
-+ error_msg_and_die("%s: regular file from device_table file must exist on disk!", full_path);
-+ }
-+
-+ namelen = strlen(name);
-+ if (namelen > MAX_INPUT_NAMELEN) {
-+ error_msg_and_die(
-+ "Very long (%u bytes) filename `%s' found.\n"
-+ " Please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile. Exiting.\n",
-+ namelen, name);
-+ }
-+ entry = xcalloc(1, sizeof(struct entry));
-+ entry->name = xstrdup(name);
-+ /* truncate multi-byte UTF-8 filenames on character boundary */
-+ if (namelen > CRAMFS_MAXPATHLEN) {
-+ namelen = CRAMFS_MAXPATHLEN;
-+ warn_namelen = 1;
-+ /* the first lost byte must not be a trail byte */
-+ while ((entry->name[namelen] & 0xc0) == 0x80) {
-+ namelen--;
-+ /* are we reasonably certain it was UTF-8 ? */
-+ if (entry->name[namelen] < 0x80 || !namelen) {
-+ error_msg_and_die("cannot truncate filenames not encoded in UTF-8");
-+ }
-+ }
-+ entry->name[namelen] = '\0';
-+ }
-+ entry->mode = mode;
-+ entry->uid = uid;
-+ entry->gid = gid;
-+ entry->size = 0;
-+ if (S_ISBLK(mode) || S_ISCHR(mode)) {
-+ entry->size = rdev;
-+ if (entry->size & -(1<<CRAMFS_SIZE_WIDTH))
-+ warn_dev = 1;
-+ }
-+
-+ /* ok, now we have to backup and correct the size of all the entries above us */
-+ *fslen_ub += sizeof(struct cramfs_inode) + ((namelen + 3) & ~3);
-+ parent->size += sizeof(struct cramfs_inode) + ((namelen + 3) & ~3);
-+
-+ /* alright, time to link us in */
-+ curr = parent->child;
-+ prev = NULL;
-+ while (curr && strcmp(name, curr->name) > 0) {
-+ prev = curr;
-+ curr = curr->next;
-+ }
-+ if (!prev) parent->child = entry;
-+ else prev->next = entry;
-+ entry->next = curr;
-+ entry->child = NULL;
-+ }
-+ if (entry->uid >= 1 << CRAMFS_UID_WIDTH)
-+ warn_uid = 1;
-+ if (entry->gid >= 1 << CRAMFS_GID_WIDTH) {
-+ /* TODO: We ought to replace with a default
-+ gid instead of truncating; otherwise there
-+ are security problems. Maybe mode should
-+ be &= ~070. Same goes for uid once Linux
-+ supports >16-bit uids. */
-+ warn_gid = 1;
-+ }
-+ free(path);
-+}
-+
-+/* the GNU C library has a wonderful scanf("%as", string) which will
-+ allocate the string with the right size, good to avoid buffer overruns.
-+ the following macros use it if available or use a hacky workaround...
-+ */
-+
-+#ifdef __GNUC__
-+#define SCANF_PREFIX "a"
-+#define SCANF_STRING(s) (&s)
-+#define GETCWD_SIZE 0
-+#else
-+#define SCANF_PREFIX "511"
-+#define SCANF_STRING(s) (s = xmalloc(512))
-+#define GETCWD_SIZE -1
-+inline int snprintf(char *str, size_t n, const char *fmt, ...)
-+{
-+ int ret;
-+ va_list ap;
-+
-+ va_start(ap, fmt);
-+ ret = vsprintf(str, fmt, ap);
-+ va_end(ap);
-+ return ret;
-+}
-+#endif
-+
-+/* device table entries take the form of:
-+ <path> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-+ /dev/mem c 640 0 0 1 1 0 0 -
-+
-+ type can be one of:
-+ f A regular file
-+ d Directory
-+ c Character special device file
-+ b Block special device file
-+ p Fifo (named pipe)
-+
-+ I don't bother with symlinks (permissions are irrelevant), hard
-+ links (special cases of regular files), or sockets (why bother).
-+
-+ Regular files must exist in the target root directory. If a char,
-+ block, fifo, or directory does not exist, it will be created.
-+*/
-+
-+static int interpret_table_entry(char *line, struct entry *root, loff_t *fslen_ub)
-+{
-+ char type, *name = NULL;
-+ unsigned long mode = 0755, uid = 0, gid = 0, major = 0, minor = 0;
-+ unsigned long start = 0, increment = 1, count = 0;
-+
-+ if (sscanf (line, "%" SCANF_PREFIX "s %c %lo %lu %lu %lu %lu %lu %lu %lu",
-+ SCANF_STRING(name), &type, &mode, &uid, &gid, &major, &minor,
-+ &start, &increment, &count) < 0)
-+ {
-+ return 1;
-+ }
-+
-+ if (!strcmp(name, "/")) {
-+ error_msg_and_die("Device table entries require absolute paths");
-+ }
-+
-+ switch (type) {
-+ case 'd':
-+ mode |= S_IFDIR;
-+ modify_entry(name, uid, gid, mode, 0, root, fslen_ub);
-+ break;
-+ case 'f':
-+ mode |= S_IFREG;
-+ modify_entry(name, uid, gid, mode, 0, root, fslen_ub);
-+ break;
-+ case 'p':
-+ mode |= S_IFIFO;
-+ modify_entry(name, uid, gid, mode, 0, root, fslen_ub);
-+ break;
-+ case 'c':
-+ case 'b':
-+ mode |= (type == 'c') ? S_IFCHR : S_IFBLK;
-+ if (count > 0) {
-+ char *buf;
-+ unsigned long i;
-+ dev_t rdev;
-+
-+ for (i = start; i < count; i++) {
-+ asprintf(&buf, "%s%lu", name, i);
-+ rdev = makedev(major, minor + (i * increment - start));
-+ modify_entry(buf, uid, gid, mode, rdev, root, fslen_ub);
-+ free(buf);
-+ }
-+ } else {
-+ dev_t rdev = makedev(major, minor);
-+ modify_entry(name, uid, gid, mode, rdev, root, fslen_ub);
-+ }
-+ break;
-+ default:
-+ error_msg_and_die("Unsupported file type");
-+ }
-+ free(name);
-+ return 0;
-+}
-+
-+static int parse_device_table(FILE *file, struct entry *root, loff_t *fslen_ub)
-+{
-+ char *line;
-+ int status = 0;
-+ size_t length = 0;
-+
-+ /* Turn off squash, since we must ensure that values
-+ * entered via the device table are not squashed */
-+ opt_squash = 0;
-+
-+ /* Looks ok so far. The general plan now is to read in one
-+ * line@a time, check for leading comment delimiters ('#'),
-+ * then try and parse the line as a device table. If we fail
-+ * to parse things, try and help the poor fool to fix their
-+ * device table with a useful error msg... */
-+ line = NULL;
-+ while (getline(&line, &length, file) != -1) {
-+ /* First trim off any whitespace */
-+ int len = strlen(line);
-+
-+ /* trim trailing whitespace */
-+ while (len > 0 && isspace(line[len - 1]))
-+ line[--len] = '\0';
-+ /* trim leading whitespace */
-+ memmove(line, &line[strspn(line, " \n\r\t\v")], len);
-+
-+ /* How long are we after trimming? */
-+ len = strlen(line);
-+
-+ /* If this is NOT a comment line, try to interpret it */
-+ if (len && *line != '#') {
-+ if (interpret_table_entry(line, root, fslen_ub))
-+ status = 1;
-+ }
-+
-+ free(line);
-+ line = NULL;
-+ }
-+ free(line);
-+ fclose(file);
-+
-+ return status;
-+}
-+
-+void traverse(struct entry *entry, int depth)
-+{
-+ struct entry *curr = entry;
-+ int i;
-+
-+ while (curr) {
-+ for (i = 0; i < depth; i++) putchar(' ');
-+ printf("%s: size=%d mode=%d same=%p\n",
-+ (curr->name)? (char*)curr->name : "/",
-+ curr->size, curr->mode, curr->same);
-+ if (curr->child) traverse(curr->child, depth + 4);
-+ curr = curr->next;
-+ }
-+}
-+
-+static void free_filesystem_entry(struct entry *dir)
-+{
-+ struct entry *e = dir, *last;
-+
-+ if (S_ISDIR(dir->mode)) {
-+ e = dir->child;
-+ }
-+ while (e) {
-+ if (e->name)
-+ free(e->name);
-+ if (e->path)
-+ free(e->path);
-+ if (e->uncompressed)
-+ free(e->uncompressed);
-+ last = e;
-+ if (e->child) {
-+ free_filesystem_entry(e);
-+ }
-+ e = e->next;
-+ free(last);
-+ }
-+}
-+
-+
-+/*
-+ * Usage:
-+ *
-+ * mkcramfs directory-name outfile
-+ *
-+ * where "directory-name" is simply the root of the directory
-+ * tree that we want to generate a compressed filesystem out
-+ * of.
-+ */
- int main(int argc, char **argv)
- {
- struct stat st; /* used twice... */
-@@ -692,6 +1138,7 @@
- u32 crc;
- int c; /* for getopt */
- char *ep; /* for strtoul */
-+ FILE *devtable = NULL;
-
- total_blocks = 0;
-
-@@ -699,7 +1146,7 @@
- progname = argv[0];
-
- /* command line options */
-- while ((c = getopt(argc, argv, "hEe:i:n:psvz")) != EOF) {
-+ while ((c = getopt(argc, argv, "hEe:i:n:psvzD:q")) != EOF) {
- switch (c) {
- case 'h':
- usage(MKFS_OK);
-@@ -715,7 +1162,7 @@
- case 'i':
- opt_image = optarg;
- if (lstat(opt_image, &st) < 0) {
-- die(MKFS_ERROR, 1, "lstat failed: %s", opt_image);
-+ error_msg_and_die("lstat failed: %s", opt_image);
- }
- image_length = st.st_size; /* may be padded later */
- fslen_ub += (image_length + 3); /* 3 is for padding */
-@@ -736,6 +1183,16 @@
- case 'z':
- opt_holes = 1;
- break;
-+ case 'q':
-+ opt_squash = 1;
-+ break;
-+ case 'D':
-+ devtable = xfopen(optarg, "r");
-+ if (fstat(fileno(devtable), &st) < 0)
-+ perror_msg_and_die(optarg);
-+ if (st.st_size < 10)
-+ error_msg_and_die("%s: not a proper device table file\n", optarg);
-+ break;
- }
- }
-
-@@ -745,25 +1202,23 @@
- outfile = argv[optind + 1];
-
- if (stat(dirname, &st) < 0) {
-- die(MKFS_USAGE, 1, "stat failed: %s", dirname);
-- }
-- fd = open(outfile, O_WRONLY | O_CREAT | O_TRUNC, 0666);
-- if (fd < 0) {
-- die(MKFS_USAGE, 1, "open failed: %s", outfile);
-+ error_msg_and_die("stat failed: %s", dirname);
- }
-+ fd = xopen(outfile, O_WRONLY | O_CREAT | O_TRUNC, 0666);
-
-- root_entry = calloc(1, sizeof(struct entry));
-- if (!root_entry) {
-- die(MKFS_ERROR, 1, "calloc failed");
-- }
-+ root_entry = xcalloc(1, sizeof(struct entry));
- root_entry->mode = st.st_mode;
- root_entry->uid = st.st_uid;
- root_entry->gid = st.st_gid;
-
- root_entry->size = parse_directory(root_entry, dirname, &root_entry->child, &fslen_ub);
-
-+ if (devtable) {
-+ parse_device_table(devtable, root_entry, &fslen_ub);
-+ }
-+
- /* always allocate a multiple of blksize bytes because that's
-- what we're going to write later on */
-+ what we're going to write later on */
- fslen_ub = ((fslen_ub - 1) | (blksize - 1)) + 1;
-
- if (fslen_ub > MAXFSLEN) {
-@@ -790,7 +1245,7 @@
- rom_image = mmap(NULL, fslen_ub?fslen_ub:1, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
-
- if (rom_image == MAP_FAILED) {
-- die(MKFS_ERROR, 1, "mmap failed");
-+ error_msg_and_die("mmap failed");
- }
-
- /* Skip the first opt_pad bytes for boot loader code */
-@@ -807,6 +1262,7 @@
- }
-
- offset = write_directory_structure(root_entry->child, rom_image, offset);
-+ if (opt_verbose)
- printf("Directory data: %d bytes\n", offset);
-
- offset = write_data(root_entry, rom_image, offset);
-@@ -814,30 +1270,38 @@
- /* We always write a multiple of blksize bytes, so that
- losetup works. */
- offset = ((offset - 1) | (blksize - 1)) + 1;
-+ if (opt_verbose)
- printf("Everything: %d kilobytes\n", offset >> 10);
-
- /* Write the superblock now that we can fill in all of the fields. */
- write_superblock(root_entry, rom_image+opt_pad, offset);
-+ if (opt_verbose)
- printf("Super block: %d bytes\n", sizeof(struct cramfs_super));
-
- /* Put the checksum in. */
- crc = crc32(0L, Z_NULL, 0);
- crc = crc32(crc, (rom_image+opt_pad), (offset-opt_pad));
- ((struct cramfs_super *) (rom_image+opt_pad))->fsid.crc = crc;
-+ if (opt_verbose)
- printf("CRC: %x\n", crc);
-
- /* Check to make sure we allocated enough space. */
- if (fslen_ub < offset) {
-- die(MKFS_ERROR, 0, "not enough space allocated for ROM image (%Ld allocated, %d used)", fslen_ub, offset);
-+ error_msg_and_die("not enough space allocated for ROM "
-+ "image (%Ld allocated, %d used)", fslen_ub, offset);
- }
-
- written = write(fd, rom_image, offset);
- if (written < 0) {
-- die(MKFS_ERROR, 1, "write failed");
-+ error_msg_and_die("write failed");
- }
- if (offset != written) {
-- die(MKFS_ERROR, 0, "ROM image write failed (wrote %d of %d bytes)", written, offset);
-+ error_msg_and_die("ROM image write failed (wrote %d of %d bytes)", written, offset);
- }
-+
-+ /* Free up memory */
-+ free_filesystem_entry(root_entry);
-+ free(root_entry);
-
- /* (These warnings used to come@the start, but they scroll off the
- screen too quickly.) */
diff --git a/target/cramfs/cramfs-02-endian.patch b/target/cramfs/cramfs-02-endian.patch
deleted file mode 100644
index 0da55bf..0000000
--- a/target/cramfs/cramfs-02-endian.patch
+++ /dev/null
@@ -1,284 +0,0 @@
---- cramfs-1.1/mkcramfs.c.orig 2005-04-13 05:55:57.000000000 -0600
-+++ cramfs-1.1/mkcramfs.c 2005-04-13 16:19:57.000000000 -0600
-@@ -117,6 +117,7 @@
- static int opt_squash = 0;
- static char *opt_image = NULL;
- static char *opt_name = NULL;
-+static int swap_endian = 0;
-
- static int warn_dev, warn_gid, warn_namelen, warn_skip, warn_size, warn_uid;
- static const char *const memory_exhausted = "memory exhausted";
-@@ -155,6 +156,8 @@
- " -i file insert a file image into the filesystem (requires >= 2.4.0)\n"
- " -n name set name of cramfs filesystem\n"
- " -p pad by %d bytes for boot code\n"
-+ " -l litte endian filesystem\n"
-+ " -b big endian filesystem\n"
- " -s sort directory entries (old option, ignored)\n"
- " -v be more verbose\n"
- " -z make explicit holes (requires >= 2.3.39)\n"
-@@ -504,6 +506,50 @@
- return totalsize;
- }
-
-+/* routines to swap endianness/bitfields in inode/superblock block data */
-+static void fix_inode(struct cramfs_inode *inode)
-+{
-+#define wswap(x) (((x)>>24) | (((x)>>8)&0xff00) | (((x)&0xff00)<<8) | (((x)&0xff)<<24))
-+ /* attempt #2 */
-+ inode->mode = (inode->mode >> 8) | ((inode->mode&0xff)<<8);
-+ inode->uid = (inode->uid >> 8) | ((inode->uid&0xff)<<8);
-+ inode->size = (inode->size >> 16) | (inode->size&0xff00) |
-+ ((inode->size&0xff)<<16);
-+ ((u32*)inode)[2] = wswap(inode->offset | (inode->namelen<<26));
-+}
-+
-+static void fix_offset(struct cramfs_inode *inode, u32 offset)
-+{
-+ u32 tmp = wswap(((u32*)inode)[2]);
-+ ((u32*)inode)[2] = wswap((offset >> 2) | (tmp&0xfc000000));
-+}
-+
-+static void fix_block_pointer(u32 *p)
-+{
-+ *p = wswap(*p);
-+}
-+
-+static void fix_super(struct cramfs_super *super)
-+{
-+ u32 *p = (u32*)super;
-+
-+ /* fix superblock fields */
-+ p[0] = wswap(p[0]); /* magic */
-+ p[1] = wswap(p[1]); /* size */
-+ p[2] = wswap(p[2]); /* flags */
-+ p[3] = wswap(p[3]); /* future */
-+
-+ /* fix filesystem info fields */
-+ p = (u32*)&super->fsid;
-+ p[0] = wswap(p[0]); /* crc */
-+ p[1] = wswap(p[1]); /* edition */
-+ p[2] = wswap(p[2]); /* blocks */
-+ p[3] = wswap(p[3]); /* files */
-+
-+ fix_inode(&super->root);
-+#undef wswap
-+}
-+
- /* Returns sizeof(struct cramfs_super), which includes the root inode. */
- static unsigned int write_superblock(struct entry *root, char *base, int size)
- {
-@@ -539,6 +585,7 @@
- super->root.gid = root->gid;
- super->root.size = root->size;
- super->root.offset = offset >> 2;
-+ if (swap_endian) fix_super(super);
-
- return offset;
- }
-@@ -553,7 +600,10 @@
- if (offset >= (1 << (2 + CRAMFS_OFFSET_WIDTH))) {
- error_msg_and_die("filesystem too big");
- }
-- inode->offset = (offset >> 2);
-+ if (swap_endian)
-+ fix_offset(inode, offset);
-+ else
-+ inode->offset = (offset >> 2);
- }
-
- /*
-@@ -638,6 +688,7 @@
- stack_entries++;
- }
- entry = entry->next;
-+ if (swap_endian) fix_inode(inode);
- }
-
- /*
-@@ -734,6 +785,7 @@
- }
-
- *(u32 *) (base + offset) = curr;
-+ if (swap_endian) fix_block_pointer((u32*)(base + offset));
- offset += 4;
- } while (size);
-
-@@ -1146,7 +1198,7 @@
- progname = argv[0];
-
- /* command line options */
-- while ((c = getopt(argc, argv, "hEe:i:n:psvzD:q")) != EOF) {
-+ while ((c = getopt(argc, argv, "hEe:i:n:psvzD:qlb")) != EOF) {
- switch (c) {
- case 'h':
- usage(MKFS_OK);
-@@ -1174,6 +1227,18 @@
- opt_pad = PAD_SIZE;
- fslen_ub += PAD_SIZE;
- break;
-+ case 'b':
-+#if __BYTE_ORDER == __LITTLE_ENDIAN
-+ swap_endian = 1;
-+ printf("Swapping filesystem endian-ness\n");
-+#endif
-+ break;
-+ case 'l':
-+#if __BYTE_ORDER == __BIG_ENDIAN
-+ swap_endian = 1;
-+ printf("Swapping filesystem endian-ness\n");
-+#endif
-+ break;
- case 's':
- /* old option, ignored */
- break;
---- cramfs-1.1/cramfsck.c.orig 2005-04-25 11:50:31.000000000 -0700
-+++ cramfs-1.1/cramfsck.c 2005-04-25 16:53:25.000000000 -0700
-@@ -30,6 +30,7 @@
- * 2000/07/15: Daniel Quinlan (initial support for block devices)
- * 2002/01/10: Daniel Quinlan (additional checks, test more return codes,
- * use read if mmap fails, standardize messages)
-+ * 2004/09/01: Alfonso Acosta (Add swapping support)
- */
-
- /* compile-time options */
-@@ -51,6 +52,7 @@
- #include <utime.h>
- #include <sys/ioctl.h>
- #define _LINUX_STRING_H_
-+#include <byteswap.h>
- #include "linux/cramfs_fs.h"
- #include <zlib.h>
-
-@@ -74,6 +76,7 @@
- static char *filename; /* ROM image filename */
- struct cramfs_super super; /* just find the cramfs superblock once */
- static int opt_verbose = 0; /* 1 = verbose (-v), 2+ = very verbose (-vv) */
-+static int need_swapping = 0; /* fs and host dont have the same endianness */
- #ifdef INCLUDE_FS_TESTS
- static int opt_extract = 0; /* extract cramfs (-x) */
- static char *extract_dir = "/"; /* extraction directory (-x) */
-@@ -85,6 +88,9 @@
- static unsigned long start_data = ~0UL; /* start of the data (256 MB = max) */
- static unsigned long end_data = 0; /* end of the data */
-
-+/* access 32 byte variables */
-+#define CRAMFS_32(x) (need_swapping ? bswap_32(x) : x)
-+
- /* Guarantee access to at least 8kB at a time */
- #define ROMBUFFER_BITS 13
- #define ROMBUFFERSIZE (1 << ROMBUFFER_BITS)
-@@ -166,20 +172,34 @@
- if (super.magic == CRAMFS_MAGIC) {
- *start = 0;
- }
-+ else if (super.magic == bswap_32(CRAMFS_MAGIC)) {
-+ *start = 0;
-+ need_swapping = 1;
-+ }
-+
- else if (*length >= (PAD_SIZE + sizeof(super))) {
- lseek(fd, PAD_SIZE, SEEK_SET);
- if (read(fd, &super, sizeof(super)) != sizeof(super)) {
- die(FSCK_ERROR, 1, "read failed: %s", filename);
- }
-- if (super.magic == CRAMFS_MAGIC) {
-+ if (super.magic == CRAMFS_32(CRAMFS_MAGIC)) {
- *start = PAD_SIZE;
- }
- }
-
- /* superblock tests */
-- if (super.magic != CRAMFS_MAGIC) {
-+ if (super.magic != CRAMFS_32(CRAMFS_MAGIC)) {
- die(FSCK_UNCORRECTED, 0, "superblock magic not found");
- }
-+ if (need_swapping){
-+ super.size = bswap_32(super.size);
-+ super.flags = bswap_32(super.flags);
-+ super.future = bswap_32(super.future);
-+ super.fsid.crc = bswap_32(super.fsid.crc);
-+ super.fsid.edition = bswap_32(super.fsid.edition);
-+ super.fsid.blocks = bswap_32(super.fsid.blocks);
-+ super.fsid.files = bswap_32(super.fsid.files);
-+ }
- if (super.flags & ~CRAMFS_SUPPORTED_FLAGS) {
- die(FSCK_ERROR, 0, "unsupported filesystem features");
- }
-@@ -215,7 +235,10 @@
- die(FSCK_USAGE, 0, "unable to test CRC: old cramfs format");
- #endif /* not INCLUDE_FS_TESTS */
- }
--
-+ else if (need_swapping) {
-+ /* crc checking in this case would mean translating the whole file */
-+ return;
-+ }
- crc = crc32(0L, Z_NULL, 0);
-
- buf = mmap(NULL, super.size, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0);
-@@ -300,12 +323,23 @@
-
- static struct cramfs_inode *cramfs_iget(struct cramfs_inode * i)
- {
-+#define wswap(x) (((x)>>24) | (((x)>>8)&0xff00) | (((x)&0xff00)<<8) | (((x)&0xff)<<24))
- struct cramfs_inode *inode = malloc(sizeof(struct cramfs_inode));
-
- if (!inode) {
- die(FSCK_ERROR, 1, "malloc failed");
- }
-- *inode = *i;
-+ if(!need_swapping) {
-+ *inode = *i;
-+ }
-+ else {
-+ inode->mode=bswap_16(i->mode);
-+ inode->uid=bswap_16(i->uid);
-+ inode->size=bswap_32(i->size << 8);
-+ inode->gid=i->gid;
-+ inode->namelen = bswap_32(((u32*)i)[2]) >> 26;
-+ inode->offset = bswap_32(((u32*)i)[2]) & 0x3FFFFFFF;
-+ }
- return inode;
- }
-
-@@ -324,9 +358,9 @@
- */
- static struct cramfs_inode *read_super(void)
- {
-- unsigned long offset = super.root.offset << 2;
--
-- if (!S_ISDIR(super.root.mode))
-+ struct cramfs_inode *root = cramfs_iget(&super.root);
-+ unsigned long offset = root->offset << 2;
-+ if (!S_ISDIR(root->mode))
- die(FSCK_UNCORRECTED, 0, "root inode is not directory");
- if (!(super.flags & CRAMFS_FLAG_SHIFTED_ROOT_OFFSET) &&
- ((offset != sizeof(struct cramfs_super)) &&
-@@ -334,7 +368,7 @@
- {
- die(FSCK_UNCORRECTED, 0, "bad root offset (%lu)", offset);
- }
-- return cramfs_iget(&super.root);
-+ return root;
- }
-
- static int uncompress_block(void *src, int len)
-@@ -366,7 +400,7 @@
-
- do {
- unsigned long out = PAGE_CACHE_SIZE;
-- unsigned long next = *(u32 *) romfs_read(offset);
-+ unsigned long next = CRAMFS_32(*(u32 *) romfs_read(offset));
-
- if (next > end_data) {
- end_data = next;
-@@ -529,7 +563,7 @@
- {
- unsigned long offset = i->offset << 2;
- unsigned long curr = offset + 4;
-- unsigned long next = *(u32 *) romfs_read(offset);
-+ unsigned long next = CRAMFS_32(*(u32 *) romfs_read(offset));
- unsigned long size;
-
- if (offset == 0) {
diff --git a/target/cramfs/cramfs-03-cygwin_IO.patch b/target/cramfs/cramfs-03-cygwin_IO.patch
deleted file mode 100644
index 4ea358e..0000000
--- a/target/cramfs/cramfs-03-cygwin_IO.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- cramfs-1.1/cramfsck.c.orig 2006-12-22 22:16:59.328125000 +1100
-+++ cramfs-1.1/cramfsck.c 2006-12-19 01:02:05.531250000 +1100
-@@ -56,6 +56,10 @@
- #include "linux/cramfs_fs.h"
- #include <zlib.h>
-
-+#ifdef __CYGWIN__
-+#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0)
-+#endif /* __CYGWIN__ */
-+
- #define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */
-
- /* Exit codes used by fsck-type programs */
diff --git a/target/cramfs/cramfs.mk b/target/cramfs/cramfs.mk
index e6d63ed..f431629 100644
--- a/target/cramfs/cramfs.mk
+++ b/target/cramfs/cramfs.mk
@@ -1,40 +1,5 @@
#############################################################
#
-# mkcramfs to build to target cramfs filesystems
-#
-#############################################################
-CRAMFS_DIR=$(BUILD_DIR)/cramfs-1.1
-CRAMFS_SOURCE=cramfs-1.1.tar.gz
-ifeq ($(call qstrip,$(BR2_SOURCEFORGE_MIRROR)),unc)
-# UNC does not seem to have cramfs
-CRAMFS_SITE=http://internap.dl.sourceforge.net/sourceforge/cramfs
-else
-CRAMFS_SITE=http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/cramfs
-endif
-
-$(DL_DIR)/$(CRAMFS_SOURCE):
- $(call DOWNLOAD,$(CRAMFS_SITE),$(CRAMFS_SOURCE))
-
-$(CRAMFS_DIR): $(DL_DIR)/$(CRAMFS_SOURCE)
- $(ZCAT) $(DL_DIR)/$(CRAMFS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- toolchain/patch-kernel.sh $(CRAMFS_DIR) target/cramfs/ cramfs\*.patch
-
-$(CRAMFS_DIR)/mkcramfs: $(CRAMFS_DIR)
- $(MAKE) CFLAGS="$(HOST_CFLAGS) -Wall -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" LDFLAGS="$(HOST_LDFLAGS)" -C $(CRAMFS_DIR)
- touch -c $@
-
-cramfs: host-zlib $(CRAMFS_DIR)/mkcramfs
-
-cramfs-source: $(DL_DIR)/$(CRAMFS_SOURCE)
-
-cramfs-clean:
- -$(MAKE) -C $(CRAMFS_DIR) clean
-
-cramfs-dirclean:
- rm -rf $(CRAMFS_DIR)
-
-#############################################################
-#
# Build the cramfs root filesystem image
#
#############################################################
@@ -50,7 +15,7 @@ endif
CRAMFS_TARGET=$(IMAGE).cramfs
-cramfsroot: host-fakeroot makedevs cramfs
+cramfsroot: host-fakeroot host-cramfs makedevs
# Use fakeroot to pretend all target binaries are owned by root
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
touch $(BUILD_DIR)/.fakeroot.00000
@@ -62,20 +27,12 @@ ifneq ($(TARGET_DEVICE_TABLE),)
>> $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
endif
# Use fakeroot so mkcramfs believes the previous fakery
- echo "$(CRAMFS_DIR)/mkcramfs -q $(CRAMFS_OPTS) " \
+ echo "$(HOST_DIR)/usr/bin/mkcramfs -q $(CRAMFS_OPTS) " \
"$(TARGET_DIR) $(CRAMFS_TARGET)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
$(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
- at rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
-cramfsroot-source: cramfs-source
-
-cramfsroot-clean:
- -$(MAKE) -C $(CRAMFS_DIR) clean
-
-cramfsroot-dirclean:
- rm -rf $(CRAMFS_DIR)
-
#############################################################
#
# Toplevel Makefile options
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 16/44] target/ext2: cleanup
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (14 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 15/44] target/cramfs: cleanup Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 17/44] target/iso9660: cleanup Thomas Petazzoni
` (29 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Remove the genext2fs host tools building process, which is now in
package/genext2fs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/ext2/Config.in | 1 -
target/ext2/ext2root.mk | 56 ++++------------------------------------------
2 files changed, 5 insertions(+), 52 deletions(-)
diff --git a/target/ext2/Config.in b/target/ext2/Config.in
index e94fb40..1b1dc8a 100644
--- a/target/ext2/Config.in
+++ b/target/ext2/Config.in
@@ -1,7 +1,6 @@
config BR2_TARGET_ROOTFS_EXT2
bool "ext2 root filesystem"
default y
- select BR2_HOST_FAKEROOT
help
Build an ext2 root filesystem
diff --git a/target/ext2/ext2root.mk b/target/ext2/ext2root.mk
index 622b293..6c8e02a 100644
--- a/target/ext2/ext2root.mk
+++ b/target/ext2/ext2root.mk
@@ -1,41 +1,5 @@
#############################################################
#
-# genext2fs to build to target ext2 filesystems
-#
-#############################################################
-GENEXT2_VERSION=1.4
-GENEXT2_DIR=$(BUILD_DIR)/genext2fs-$(GENEXT2_VERSION)
-GENEXT2_SOURCE=genext2fs-$(GENEXT2_VERSION).tar.gz
-GENEXT2_SITE:=http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/genext2fs
-
-$(DL_DIR)/$(GENEXT2_SOURCE):
- $(call DOWNLOAD,$(GENEXT2_SITE),$(GENEXT2_SOURCE))
-
-$(GENEXT2_DIR)/.unpacked: $(DL_DIR)/$(GENEXT2_SOURCE)
- $(ZCAT) $(DL_DIR)/$(GENEXT2_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- toolchain/patch-kernel.sh $(GENEXT2_DIR) target/ext2/ genext2fs\*.patch
- touch $@
-
-$(GENEXT2_DIR)/.configured: $(GENEXT2_DIR)/.unpacked
- chmod a+x $(GENEXT2_DIR)/configure
- (cd $(GENEXT2_DIR); rm -rf config.cache; \
- ./configure $(QUIET) \
- CC="$(HOSTCC)" \
- --prefix=$(STAGING_DIR) \
- )
- touch $@
-
-$(GENEXT2_DIR)/genext2fs: $(GENEXT2_DIR)/.configured
- $(MAKE) CFLAGS="-Wall -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE \
- -D_FILE_OFFSET_BITS=64" -C $(GENEXT2_DIR)
- touch -c $@
-
-genext2fs: $(GENEXT2_DIR)/genext2fs
-
-
-
-#############################################################
-#
# Build the ext2 root filesystem image
#
#############################################################
@@ -66,17 +30,15 @@ EXT2_ROOTFS_COMPRESSOR_PREREQ:=
ifeq ($(BR2_TARGET_ROOTFS_EXT2_GZIP),y)
EXT2_ROOTFS_COMPRESSOR:=gzip -9 -c
EXT2_ROOTFS_COMPRESSOR_EXT:=gz
-#EXT2_ROOTFS_COMPRESSOR_PREREQ:= gzip-host
endif
ifeq ($(BR2_TARGET_ROOTFS_EXT2_BZIP2),y)
EXT2_ROOTFS_COMPRESSOR:=bzip2 -9 -c
EXT2_ROOTFS_COMPRESSOR_EXT:=bz2
-#EXT2_ROOTFS_COMPRESSOR_PREREQ:= bzip2-host
endif
ifeq ($(BR2_TARGET_ROOTFS_EXT2_LZMA),y)
-EXT2_ROOTFS_COMPRESSOR:=lzma -9 -c
+EXT2_ROOTFS_COMPRESSOR:=$(LZMA) -9 -c
EXT2_ROOTFS_COMPRESSOR_EXT:=lzma
-EXT2_ROOTFS_COMPRESSOR_PREREQ:= lzma-host
+EXT2_ROOTFS_COMPRESSOR_PREREQ:=host-lzma
endif
ifneq ($(EXT2_ROOTFS_COMPRESSOR),)
@@ -85,7 +47,7 @@ else
EXT2_TARGET := $(EXT2_BASE)
endif
-$(EXT2_BASE): host-fakeroot makedevs genext2fs
+$(EXT2_BASE): host-fakeroot host-genext2fs makedevs
# Use fakeroot to pretend all target binaries are owned by root
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
touch $(BUILD_DIR)/.fakeroot.00000
@@ -104,11 +66,11 @@ ifeq ($(strip $(BR2_TARGET_ROOTFS_EXT2_BLOCKS)),0)
GENEXT2_ADDTOINODESIZE=`find $(TARGET_DIR) | wc -l`; \
GENEXT2_INODES=`expr $$GENEXT2_ADDTOINODESIZE + 400`; \
set -x; \
- echo "$(GENEXT2_DIR)/genext2fs -b $$GENEXT2_SIZE " \
+ echo "$(HOST_DIR)/usr/bin/genext2fs -b $$GENEXT2_SIZE " \
"-N $$GENEXT2_INODES -d $(TARGET_DIR) " \
"$(EXT2_OPTS) $(EXT2_BASE)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
else
- echo "$(GENEXT2_DIR)/genext2fs -d $(TARGET_DIR) " \
+ echo "$(HOST_DIR)/usr/bin/genext2fs -d $(TARGET_DIR) " \
"$(EXT2_OPTS) $(EXT2_BASE)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
endif
chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
@@ -128,14 +90,6 @@ ifneq ($(EXT2_COPYTO),)
@cp -f $(EXT2_TARGET) $(EXT2_COPYTO)
endif
-ext2root-source: $(DL_DIR)/$(GENEXT2_SOURCE)
-
-ext2root-clean:
- -$(MAKE) -C $(GENEXT2_DIR) clean
-
-ext2root-dirclean:
- rm -rf $(GENEXT2_DIR)
-
#############################################################
#
# Toplevel Makefile options
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 17/44] target/iso9660: cleanup
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (15 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 16/44] target/ext2: cleanup Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 18/44] target/jffs2: cleanup Thomas Petazzoni
` (28 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Remove the mkisofs host tools building process, which is now in
package/cdrkit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/iso9660/Config.in | 1 -
target/iso9660/iso9660.mk | 52 +-------------------------------------------
2 files changed, 2 insertions(+), 51 deletions(-)
diff --git a/target/iso9660/Config.in b/target/iso9660/Config.in
index 0b82063..40c93b3 100644
--- a/target/iso9660/Config.in
+++ b/target/iso9660/Config.in
@@ -4,7 +4,6 @@ config BR2_TARGET_ROOTFS_ISO9660
depends on !BR2_KERNEL_none
select BR2_TARGET_ROOTFS_EXT2
select BR2_TARGET_GRUB
- select BR2_HOST_FAKEROOT
help
Build a bootable iso9660 image
diff --git a/target/iso9660/iso9660.mk b/target/iso9660/iso9660.mk
index 9571e47..a198c17 100644
--- a/target/iso9660/iso9660.mk
+++ b/target/iso9660/iso9660.mk
@@ -1,46 +1,5 @@
#############################################################
#
-# mkisofs to build to target iso9660 filesystems
-#
-#############################################################
-MKISOFS_SOURCE:=cdrtools-2.01.tar.bz2
-MKISOFS_CAT:=$(BZCAT)
-MKISOFS_SITE:=ftp://ftp.berlios.de/pub/cdrecord/
-MKISOFS_DIR:=$(BUILD_DIR)/cdrtools-2.01
-MKISOFS_TARGET=$(MKISOFS_DIR)/mkisofs/OBJ/$(HOST_ARCH)-linux-cc/mkisofs
-
-hest:
- @echo ARCH=$(BR2_ARCH) HOST_ARCH=$(HOST_ARCH)
-$(DL_DIR)/$(MKISOFS_SOURCE):
- $(call DOWNLOAD,$(MKISOFS_SITE),$(MKISOFS_SOURCE))
-
-mkisofs-source: $(DL_DIR)/$(MKISOFS_SOURCE)
-
-$(MKISOFS_DIR)/.unpacked: $(DL_DIR)/$(MKISOFS_SOURCE)
- $(MKISOFS_CAT) $(DL_DIR)/$(MKISOFS_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- toolchain/patch-kernel.sh $(MKISOFS_DIR) target/iso9660/ \*.patch
- touch $@
-
-$(MKISOFS_DIR)/.configured: $(MKISOFS_DIR)/.unpacked
- (cd $(MKISOFS_DIR); rm -rf config.cache; \
- );
- touch $@
-
-$(MKISOFS_TARGET): $(MKISOFS_DIR)/.configured
- $(MAKE) -C $(MKISOFS_DIR)
- touch -c $(MKISOFS_DIR)/mkisofs
-
-mkisofs: $(MKISOFS_TARGET)
-
-mkisofs-clean:
- -$(MAKE) -C $(MKISOFS_DIR) clean
-
-mkisofs-dirclean:
- rm -rf $(MKISOFS_DIR)
-
-
-#############################################################
-#
# Build the iso96600 root filesystem image
#
#############################################################
@@ -54,7 +13,7 @@ ifeq ($(BR2_TARGET_ROOTFS_ISO9660_SQUASH),y)
ISO9660_OPTS+=-U
endif
-$(ISO9660_TARGET): host-fakeroot $(LINUX_KERNEL) $(EXT2_TARGET) grub mkisofs
+$(ISO9660_TARGET): host-fakeroot host-cdrkit $(LINUX_KERNEL) $(EXT2_TARGET) grub
mkdir -p $(ISO9660_TARGET_DIR)
mkdir -p $(ISO9660_TARGET_DIR)/boot/grub
cp $(GRUB_DIR)/stage2/stage2_eltorito $(ISO9660_TARGET_DIR)/boot/grub/
@@ -67,7 +26,7 @@ $(ISO9660_TARGET): host-fakeroot $(LINUX_KERNEL) $(EXT2_TARGET) grub mkisofs
cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
echo "chown -R 0:0 $(ISO9660_TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
# Use fakeroot so mkisofs believes the previous fakery
- echo "$(MKISOFS_TARGET) -R -b boot/grub/stage2_eltorito -no-emul-boot " \
+ echo "$(HOST_DIR)/usr/bin/genisoimage -R -b boot/grub/stage2_eltorito -no-emul-boot " \
"-boot-load-size 4 -boot-info-table -o $(ISO9660_TARGET) $(ISO9660_TARGET_DIR)" \
>> $(BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
@@ -78,13 +37,6 @@ iso9660root: $(ISO9660_TARGET)
echo $(ISO9660_TARGET)
@ls -l $(ISO9660_TARGET)
-iso9660root-source: mkisofs-source
-
-iso9660root-clean: mkisofs-clean
-
-iso9660root-dirclean: mkisofs-dirclean
- rm -rf $(ISO9660_DIR)
-
#############################################################
#
# Toplevel Makefile options
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 18/44] target/jffs2: cleanup
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (16 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 17/44] target/iso9660: cleanup Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 19/44] target/romfs: cleanup Thomas Petazzoni
` (27 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Remove the code to build host MTD utils, since they can now be built
using package/mtd.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/jffs2/Config.in | 1 -
target/jffs2/jffs2root.mk | 10 +---------
2 files changed, 1 insertions(+), 10 deletions(-)
diff --git a/target/jffs2/Config.in b/target/jffs2/Config.in
index bcb4d51..bf4ac60 100644
--- a/target/jffs2/Config.in
+++ b/target/jffs2/Config.in
@@ -1,6 +1,5 @@
config BR2_TARGET_ROOTFS_JFFS2
bool "jffs2 root filesystem"
- select BR2_HOST_FAKEROOT
help
Build a jffs2 root filesystem
diff --git a/target/jffs2/jffs2root.mk b/target/jffs2/jffs2root.mk
index 7d31417..30ac86d 100644
--- a/target/jffs2/jffs2root.mk
+++ b/target/jffs2/jffs2root.mk
@@ -44,7 +44,7 @@ endif
# value of MKFS_JFFS2 to either the previously installed copy or the one
# just built.
#
-$(JFFS2_TARGET): host-fakeroot makedevs mtd-host
+$(JFFS2_TARGET): host-fakeroot host-mtd makedevs
# Use fakeroot to pretend all target binaries are owned by root
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
touch $(BUILD_DIR)/.fakeroot.00000
@@ -81,14 +81,6 @@ ifneq ($(JFFS2_COPYTO),)
@cp -f $(JFFS2_TARGET) $(JFFS2_COPYTO)
endif
-jffs2root-source: mtd-host-source
-
-jffs2root-clean: mtd-host-clean
- -rm -f $(JFFS2_TARGET)
-
-jffs2root-dirclean: mtd-host-dirclean
- -rm -f $(JFFS2_TARGET)
-
#############################################################
#
# Toplevel Makefile options
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 19/44] target/romfs: cleanup
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (17 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 18/44] target/jffs2: cleanup Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 20/44] target/squashfs: cleanup, remove support for 3.x Thomas Petazzoni
` (26 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Remove the code needed to build host genromfs, since it can now be
done using package/genromfs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/romfs/Config.in | 1 -
target/romfs/romfs.mk | 42 ++----------------------------------------
2 files changed, 2 insertions(+), 41 deletions(-)
diff --git a/target/romfs/Config.in b/target/romfs/Config.in
index 03a23d4..7a8c663 100644
--- a/target/romfs/Config.in
+++ b/target/romfs/Config.in
@@ -1,6 +1,5 @@
config BR2_TARGET_ROOTFS_ROMFS
bool "romfs root filesystem"
- select BR2_HOST_FAKEROOT
help
Build a romfs image of the root filesystem.
diff --git a/target/romfs/romfs.mk b/target/romfs/romfs.mk
index 6e7fbee..e4b8ff5 100644
--- a/target/romfs/romfs.mk
+++ b/target/romfs/romfs.mk
@@ -1,42 +1,12 @@
#############################################################
#
-# genromfs to build to target romfs filesystems
-#
-#############################################################
-ROMFS_VERSION=0.5.2
-ROMFS_DIR=$(BUILD_DIR)/genromfs-$(ROMFS_VERSION)
-ROMFS_SOURCE=genromfs-$(ROMFS_VERSION).tar.gz
-ROMFS_SITE=http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/romfs
-
-$(DL_DIR)/$(ROMFS_SOURCE):
- $(call DOWNLOAD,$(ROMFS_SITE),$(ROMFS_SOURCE))
-
-$(ROMFS_DIR): $(DL_DIR)/$(ROMFS_SOURCE)
- $(ZCAT) $(DL_DIR)/$(ROMFS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-
-$(ROMFS_DIR)/genromfs: $(ROMFS_DIR)
- $(MAKE) -C $(ROMFS_DIR)
- touch -c $@
-
-romfs: $(ROMFS_DIR)/genromfs
-
-romfs-source: $(DL_DIR)/$(ROMFS_SOURCE)
-
-romfs-clean:
- -$(MAKE) -C $(ROMFS_DIR) clean
-
-romfs-dirclean:
- rm -rf $(ROMFS_DIR)
-
-#############################################################
-#
# Build the romfs root filesystem image
#
#############################################################
ROMFS_TARGET=$(IMAGE).romfs
-romfsroot: host-fakeroot makedevs romfs
+romfsroot: host-fakeroot host-genromfs makedevs
# Use fakeroot to pretend all target binaries are owned by root
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
touch $(BUILD_DIR)/.fakeroot.00000
@@ -48,19 +18,11 @@ ifneq ($(TARGET_DEVICE_TABLE),)
>> $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
endif
# Use fakeroot so genromfs believes the previous fakery
- echo "$(ROMFS_DIR)/genromfs -d $(TARGET_DIR) -f $(ROMFS_TARGET)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
+ echo "$(HOST_DIR)/usr/bin/genromfs -d $(TARGET_DIR) -f $(ROMFS_TARGET)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
$(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
- at rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
-romfsroot-source: romfs-source
-
-romfsroot-clean:
- -$(MAKE) -C $(ROMFS_DIR) clean
-
-romfsroot-dirclean:
- rm -rf $(ROMFS_DIR)
-
#############################################################
#
# Toplevel Makefile options
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 20/44] target/squashfs: cleanup, remove support for 3.x
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (18 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 19/44] target/romfs: cleanup Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 21/44] target/tar: cleanup Thomas Petazzoni
` (25 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Remove the code to build squashfs-tools for the host, since they can
now be built using package/squashfs.
We also remove support for Squashfs 3.x, because the Squashfs driver
merged inside the mainline kernel is a 4.x driver. So 3.x is only
useful for old kernels using a Squashfs patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/squashfs/Config.in | 28 ---------
.../squashfs/squashfs-3.4-build-system-fix.patch | 28 ---------
.../squashfs/squashfs-4.0-build-system-fix.patch | 65 --------------------
target/squashfs/squashfsroot.mk | 52 +---------------
4 files changed, 2 insertions(+), 171 deletions(-)
delete mode 100644 target/squashfs/squashfs-3.4-build-system-fix.patch
delete mode 100644 target/squashfs/squashfs-4.0-build-system-fix.patch
diff --git a/target/squashfs/Config.in b/target/squashfs/Config.in
index 9259ba3..6cc8fca 100644
--- a/target/squashfs/Config.in
+++ b/target/squashfs/Config.in
@@ -1,32 +1,4 @@
config BR2_TARGET_ROOTFS_SQUASHFS
bool "squashfs root filesystem"
- select BR2_HOST_FAKEROOT
help
Build a squashfs root filesystem
-
-choice
- prompt "Squashfs version"
- default BR2_TARGET_ROOTFS_SQUASHFS_4
- depends on BR2_TARGET_ROOTFS_SQUASHFS
- help
- Select squashfs version - This must match what your kernel
- supports. Select 3.x if you use the legacy 3.x kernel
- patches (pre 2.6.29), and 4.x otherwise.
-
-config BR2_TARGET_ROOTFS_SQUASHFS_3
- depends on BR2_DEPRECATED || BR2_RECENT
- bool "3.x"
- help
- Select this if you use the legacy 3.x kernel patches (pre 2.6.29)
-
-config BR2_TARGET_ROOTFS_SQUASHFS_4
- bool "4.x"
- help
- Select this if you use the squashfs version in mainline (from 2.6.29)
-
-endchoice
-
-config BR2_TARGET_ROOTFS_SQUASHFS_VERSION
- string
- default "3.4" if BR2_TARGET_ROOTFS_SQUASHFS_3
- default "4.0" if BR2_TARGET_ROOTFS_SQUASHFS_4
diff --git a/target/squashfs/squashfs-3.4-build-system-fix.patch b/target/squashfs/squashfs-3.4-build-system-fix.patch
deleted file mode 100644
index 5b86b00..0000000
--- a/target/squashfs/squashfs-3.4-build-system-fix.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-[PATCH]: squashfs-tools: Handle user supplied CFLAGS/LDFLAGS
-
-Properly handle make CFLAGS=.. LDFLAGS=..
-
-Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
----
- squashfs-tools/Makefile | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-Index: squashfs3.4/squashfs-tools/Makefile
-===================================================================
---- squashfs3.4.orig/squashfs-tools/Makefile
-+++ squashfs3.4/squashfs-tools/Makefile
-@@ -2,12 +2,12 @@ INSTALL_DIR = /usr/local/bin
-
- INCLUDEDIR = .
-
--CFLAGS := -I$(INCLUDEDIR) -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_GNU_SOURCE -O2
-+override CFLAGS += -I$(INCLUDEDIR) -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_GNU_SOURCE -O2
-
- all: mksquashfs unsquashfs
-
- mksquashfs: mksquashfs.o read_fs.o sort.o
-- $(CC) mksquashfs.o read_fs.o sort.o -lz -lpthread -lm -o $@
-+ $(CC) $(LDFLAGS) mksquashfs.o read_fs.o sort.o -lz -lpthread -lm -o $@
-
- mksquashfs.o: mksquashfs.c squashfs_fs.h mksquashfs.h global.h sort.h
-
diff --git a/target/squashfs/squashfs-4.0-build-system-fix.patch b/target/squashfs/squashfs-4.0-build-system-fix.patch
deleted file mode 100644
index 7ba0ab9..0000000
--- a/target/squashfs/squashfs-4.0-build-system-fix.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-Fix the build system so that CFLAGS can be overriden on the command
-line to pass additionnal -I options.
-
-Patch borrowed from OpenEmbedded.
-
-Index: squashfs-4.0/squashfs-tools/Makefile
-===================================================================
---- squashfs-4.0.orig/squashfs-tools.orig/Makefile 2009-04-19 01:47:43.000000000 +0200
-+++ squashfs-4.0/squashfs-tools/Makefile 2009-04-19 01:52:36.000000000 +0200
-@@ -1,36 +1,48 @@
- INSTALL_DIR = /usr/local/bin
-
- INCLUDEDIR = .
-+CFLAGS_R = -I$(INCLUDEDIR) -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_GNU_SOURCE
-+LIBS = -lz -lpthread
-
- CFLAGS := -I$(INCLUDEDIR) -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_GNU_SOURCE -O2
-
- all: mksquashfs unsquashfs
-
- mksquashfs: mksquashfs.o read_fs.o sort.o swap.o pseudo.o
-- $(CC) mksquashfs.o read_fs.o sort.o swap.o pseudo.o -lz -lpthread -lm -o $@
-+ $(CC) $(LDFLAGS) mksquashfs.o read_fs.o sort.o swap.o pseudo.o -lz -lpthread -lm -o $@
-
- mksquashfs.o: mksquashfs.c squashfs_fs.h mksquashfs.h global.h sort.h squashfs_swap.h Makefile
-+ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
-
- read_fs.o: read_fs.c squashfs_fs.h read_fs.h global.h squashfs_swap.h Makefile
-+ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
-
- sort.o: sort.c squashfs_fs.h global.h sort.h Makefile
-+ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
-
- swap.o: swap.c Makefile
-+ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
-
- pseudo.o: pseudo.c pseudo.h Makefile
-+ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
-
- unsquashfs: unsquashfs.o unsquash-1.o unsquash-2.o unsquash-3.o unsquash-4.o swap.o
-- $(CC) unsquashfs.o unsquash-1.o unsquash-2.o unsquash-3.o unsquash-4.o swap.o -lz -lpthread -lm -o $@
-+ $(CC) $(LDFLAGS) unsquashfs.o unsquash-1.o unsquash-2.o unsquash-3.o unsquash-4.o swap.o -lz -lpthread -lm -o $@
-
--unsquashfs.o: unsquashfs.h unsquashfs.c squashfs_fs.h squashfs_swap.h squashfs_compat.h global.h Makefile
-+unsquashfs.o: unsquashfs.c unsquashfs.h squashfs_fs.h squashfs_swap.h squashfs_compat.h global.h Makefile
-+ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
-
--unsquash-1.o: unsquashfs.h unsquash-1.c squashfs_fs.h squashfs_compat.h global.h Makefile
-+unsquash-1.o: unsquash-1.c unsquashfs.h squashfs_fs.h squashfs_compat.h global.h Makefile
-+ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
-
--unsquash-2.o: unsquashfs.h unsquash-2.c unsquashfs.h squashfs_fs.h squashfs_compat.h global.h Makefile
-+unsquash-2.o: unsquash-2.c unsquashfs.h unsquashfs.h squashfs_fs.h squashfs_compat.h global.h Makefile
-+ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
-
--unsquash-3.o: unsquashfs.h unsquash-3.c squashfs_fs.h squashfs_compat.h global.h Makefile
-+unsquash-3.o: unsquash-3.c unsquashfs.h squashfs_fs.h squashfs_compat.h global.h Makefile
-+ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
-
--unsquash-4.o: unsquashfs.h unsquash-4.c squashfs_fs.h squashfs_swap.h global.h Makefile
-+unsquash-4.o: unsquash-4.c unsquashfs.h squashfs_fs.h squashfs_swap.h global.h Makefile
-+ $(CC) $(CFLAGS_R) $(CFLAGS) -c -o $@ $<
-
- clean:
- -rm -f *.o mksquashfs unsquashfs
diff --git a/target/squashfs/squashfsroot.mk b/target/squashfs/squashfsroot.mk
index 63adc5c..01c4dab 100644
--- a/target/squashfs/squashfsroot.mk
+++ b/target/squashfs/squashfsroot.mk
@@ -1,52 +1,12 @@
#############################################################
#
-# mksquashfs to build to target squashfs filesystems
-#
-#############################################################
-SQUASHFS_VERSION:=$(call qstrip,$(BR2_TARGET_ROOTFS_SQUASHFS_VERSION))
-SQUASHFS_DIR:=$(BUILD_DIR)/squashfs$(SQUASHFS_VERSION)
-SQUASHFS_SOURCE:=squashfs$(SQUASHFS_VERSION).tar.gz
-SQUASHFS_SITE:=http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/squashfs
-SQUASHFS_CAT:=$(ZCAT)
-
-$(DL_DIR)/$(SQUASHFS_SOURCE):
- $(call DOWNLOAD,$(SQUASHFS_SITE),$(SQUASHFS_SOURCE))
-
-$(SQUASHFS_DIR)/.unpacked: $(DL_DIR)/$(SQUASHFS_SOURCE) #$(SQUASHFS_PATCH)
- $(SQUASHFS_CAT) $(DL_DIR)/$(SQUASHFS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- toolchain/patch-kernel.sh $(SQUASHFS_DIR) target/squashfs/ squashfs-$(SQUASHFS_VERSION)-\*.patch
- touch $@
-
-$(SQUASHFS_DIR)/squashfs-tools/mksquashfs: $(SQUASHFS_DIR)/.unpacked
- $(MAKE) CFLAGS="$(HOST_CFLAGS)" LDFLAGS="$(HOST_LDFLAGS)" -C $(SQUASHFS_DIR)/squashfs-tools
-
-squashfs: host-zlib $(SQUASHFS_DIR)/squashfs-tools/mksquashfs
-
-squashfs-source: $(DL_DIR)/$(SQUASHFS_SOURCE)
-
-squashfs-clean:
- -$(MAKE) -C $(SQUASHFS_DIR)/squashfs-tools clean
-
-squashfs-dirclean:
- rm -rf $(SQUASHFS_DIR)
-
-#############################################################
-#
# Build the squashfs root filesystem image
#
#############################################################
-ifeq ($(BR2_TARGET_ROOTFS_SQUASHFS_3),y)
-# 4.x is always little endian
-ifeq ($(BR2_ENDIAN),"BIG")
-SQUASHFS_ENDIANNESS=-be
-else
-SQUASHFS_ENDIANNESS=-le
-endif
-endif
SQUASHFS_TARGET:=$(IMAGE).squashfs
-squashfsroot: host-fakeroot makedevs squashfs
+squashfsroot: host-fakeroot host-squashfs makedevs
# Use fakeroot to pretend all target binaries are owned by root
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
touch $(BUILD_DIR)/.fakeroot.00000
@@ -58,7 +18,7 @@ ifneq ($(TARGET_DEVICE_TABLE),)
>> $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
endif
# Use fakeroot so mksquashfs believes the previous fakery
- echo "$(SQUASHFS_DIR)/squashfs-tools/mksquashfs " \
+ echo "$(HOST_DIR)/usr/bin/mksquashfs " \
"$(TARGET_DIR) $(SQUASHFS_TARGET) " \
"-noappend $(SQUASHFS_ENDIANNESS)" \
>> $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
@@ -67,14 +27,6 @@ endif
chmod 0644 $(SQUASHFS_TARGET)
- at rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
-squashfsroot-source: squashfs-source
-
-squashfsroot-clean:
- -$(MAKE) -C $(SQUASHFS_DIR) clean
-
-squashfsroot-dirclean:
- rm -rf $(SQUASHFS_DIR)
-
#############################################################
#
# Toplevel Makefile options
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 21/44] target/tar: cleanup
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (19 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 20/44] target/squashfs: cleanup, remove support for 3.x Thomas Petazzoni
@ 2010-04-09 9:06 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 22/44] target/ubifs: cleanup, unbroken Thomas Petazzoni
` (24 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:06 UTC (permalink / raw)
To: buildroot
Remove dependency on BR2_HOST_FAKEROOT.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/tar/Config.in | 1 -
target/tar/tarroot.mk | 6 ------
2 files changed, 0 insertions(+), 7 deletions(-)
diff --git a/target/tar/Config.in b/target/tar/Config.in
index 0209654..ae02409 100644
--- a/target/tar/Config.in
+++ b/target/tar/Config.in
@@ -1,6 +1,5 @@
config BR2_TARGET_ROOTFS_TAR
bool "tar the root filesystem"
- select BR2_HOST_FAKEROOT
help
Build a tar archive of the root filesystem
diff --git a/target/tar/tarroot.mk b/target/tar/tarroot.mk
index a7e95df..d082672 100644
--- a/target/tar/tarroot.mk
+++ b/target/tar/tarroot.mk
@@ -48,12 +48,6 @@ ifneq ($(ROOTFS_TAR_COPYTO),)
endif
- at rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
-tarroot-source:
-
-tarroot-clean:
-
-tarroot-dirclean:
-
#############################################################
#
# Toplevel Makefile options
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 22/44] target/ubifs: cleanup, unbroken
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (20 preceding siblings ...)
2010-04-09 9:06 ` [Buildroot] [PATCH 21/44] target/tar: cleanup Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 23/44] fakeroot: convert to the autotools infrastructure Thomas Petazzoni
` (23 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
Use package/mtd to build the host mtd-utils, which contains
mkfs.ubifs. Remove dependency on BR2_HOST_FAKEROOT.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/ubifs/Config.in | 2 -
target/ubifs/ubifsroot.mk | 50 +++-----------------------------------------
2 files changed, 4 insertions(+), 48 deletions(-)
diff --git a/target/ubifs/Config.in b/target/ubifs/Config.in
index 886c34b..1ce1ab0 100644
--- a/target/ubifs/Config.in
+++ b/target/ubifs/Config.in
@@ -1,7 +1,5 @@
config BR2_TARGET_ROOTFS_UBIFS
bool "ubifs root filesystem"
- depends on BROKEN # upstream git gone, should use mtd-utils
- select BR2_HOST_FAKEROOT
help
Build a ubifs root filesystem
diff --git a/target/ubifs/ubifsroot.mk b/target/ubifs/ubifsroot.mk
index e73d4f9..b48e10f 100644
--- a/target/ubifs/ubifsroot.mk
+++ b/target/ubifs/ubifsroot.mk
@@ -1,37 +1,5 @@
#############################################################
#
-# mkfs.ubifs to build to target ubifs filesystems
-#
-#############################################################
-#MKFS_UBIFS_VERSION=2582f128dad78591bc3adcc87c343c690bb82e61
-#MKFS_UBIFS_URL=http://git.infradead.org/users/dedekind/mkfs.ubifs.git?a=snapshot;h=$(MKFS_UBIFS_VERSION);sf=tgz
-MKFS_UBIFS_VERSION=v0.4
-MKFS_UBIFS_URL=http://git.infradead.org/users/dedekind/mkfs.ubifs.git?a=snapshot;h=refs/tags/mkfs.ubifs-$(MKFS_UBIFS_VERSION);sf=tgz
-MKFS_UBIFS_SOURCE:=mkfs.ubifs-$(MKFS_UBIFS_VERSION).tar.gz
-MKFS_UBIFS_DIR:= $(BUILD_DIR)/mkfs-ubifs-$(MKFS_UBIFS_VERSION)
-MKFS_UBIFS_CAT:=$(ZCAT)
-MKFS_UBIFS_NAME:=mkfs.ubifs
-
-$(DL_DIR)/$(MKFS_UBIFS_SOURCE):
- $(WGET) -O $(DL_DIR)/$(MKFS_UBIFS_SOURCE) "$(MKFS_UBIFS_URL)"
-
-$(MKFS_UBIFS_DIR)/.unpacked: $(DL_DIR)/$(MKFS_UBIFS_SOURCE)
- $(ZCAT) $(DL_DIR)/$(MKFS_UBIFS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- mv $(BUILD_DIR)/$(MKFS_UBIFS_NAME) $(MKFS_UBIFS_DIR)
- toolchain/patch-kernel.sh $(MKFS_UBIFS_DIR) target/ubifs/ mkfs-ubifs-\*.patch
- touch $@
-
-$(MKFS_UBIFS_DIR)/mkfs.ubifs: $(MKFS_UBIFS_DIR)/.unpacked
- $(MAKE) -C $(MKFS_UBIFS_DIR)
- touch -c $@
-
-mkfs.ubifs-dirclean:
- rm -rf $(MKFS_UBIFS_DIR)
-
-mkfs.ubifs: $(MKFS_UBIFS_DIR)/mkfs.ubifs
-
-#############################################################
-#
# Build the ubifs root filesystem image
#
#############################################################
@@ -56,17 +24,15 @@ UBIFS_ROOTFS_COMPRESSOR_PREREQ:=
ifeq ($(BR2_TARGET_ROOTFS_UBIFS_GZIP),y)
UBIFS_ROOTFS_COMPRESSOR:=gzip -9 -c
UBIFS_ROOTFS_COMPRESSOR_EXT:=gz
-#UBIFS_ROOTFS_COMPRESSOR_PREREQ:= gzip-host
endif
ifeq ($(BR2_TARGET_ROOTFS_UBIFS_BZIP2),y)
UBIFS_ROOTFS_COMPRESSOR:=bzip2 -9 -c
UBIFS_ROOTFS_COMPRESSOR_EXT:=bz2
-#UBIFS_ROOTFS_COMPRESSOR_PREREQ:= bzip2-host
endif
ifeq ($(BR2_TARGET_ROOTFS_UBIFS_LZMA),y)
-UBIFS_ROOTFS_COMPRESSOR:=lzma -9 -c
+UBIFS_ROOTFS_COMPRESSOR:=$(LZMA) -9 -c
UBIFS_ROOTFS_COMPRESSOR_EXT:=lzma
-UBIFS_ROOTFS_COMPRESSOR_PREREQ:= lzma-host
+UBIFS_ROOTFS_COMPRESSOR_PREREQ:= host-lzma
endif
ifneq ($(UBIFS_ROOTFS_COMPRESSOR),)
@@ -75,7 +41,7 @@ else
UBIFS_TARGET := $(UBIFS_BASE)
endif
-$(UBIFS_BASE): host-fakeroot makedevs mkfs.ubifs
+$(UBIFS_BASE): host-fakeroot host-mtd makedevs
# Use fakeroot to pretend all target binaries are owned by root
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
touch $(BUILD_DIR)/.fakeroot.00000
@@ -87,7 +53,7 @@ ifneq ($(TARGET_DEVICE_TABLE),)
>> $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
endif
# Use fakeroot so mkfs.ubifs believes the previous fakery
- echo "$(MKFS_UBIFS_DIR)/mkfs.ubifs -d $(TARGET_DIR) " \
+ echo "$(HOST_DIR)/usr/sbin/mkfs.ubifs -d $(TARGET_DIR) " \
"$(UBIFS_OPTS) -o $(UBIFS_BASE)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
$(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
@@ -106,14 +72,6 @@ ifneq ($(UBIFS_COPYTO),)
@cp -f $(UBIFS_TARGET) $(UBIFS_COPYTO)
endif
-ubifsroot-source: $(DL_DIR)/$(MKFS_UBIFS_SOURCE)
-
-ubifsroot-clean:
- -$(MAKE) -C $(MKFS_UBIFS_DIR) clean
-
-ubifsroot-dirclean:
- rm -rf $(MKFS_UBIFS_DIR)
-
#############################################################
#
# Toplevel Makefile options
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 23/44] fakeroot: convert to the autotools infrastructure
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (21 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 22/44] target/ubifs: cleanup, unbroken Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 24/44] fakeroot: remove all references to BR2_HOST_FAKEROOT Thomas Petazzoni
` (22 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/fakeroot/Config.in | 4 -
package/fakeroot/fakeroot.mk | 126 ++++-------------------------------------
2 files changed, 13 insertions(+), 117 deletions(-)
diff --git a/package/fakeroot/Config.in b/package/fakeroot/Config.in
index 679b6b2..186b717 100644
--- a/package/fakeroot/Config.in
+++ b/package/fakeroot/Config.in
@@ -4,7 +4,3 @@ config BR2_PACKAGE_FAKEROOT
Run commands in an environment faking root privileges.
http://joostje.op.het.net/fakeroot/
-
-# dummy for fakeroot-source
-config BR2_HOST_FAKEROOT
- bool
diff --git a/package/fakeroot/fakeroot.mk b/package/fakeroot/fakeroot.mk
index d525a4f..a8eff52 100644
--- a/package/fakeroot/fakeroot.mk
+++ b/package/fakeroot/fakeroot.mk
@@ -6,125 +6,25 @@
FAKEROOT_VERSION:=1.9.5
FAKEROOT_SOURCE:=fakeroot_$(FAKEROOT_VERSION).tar.gz
FAKEROOT_SITE:=http://snapshot.debian.net/archive/2008/04/27/debian/pool/main/f/fakeroot/
-FAKEROOT_CAT:=$(ZCAT)
-FAKEROOT_SOURCE_DIR:=$(BUILD_DIR)/fakeroot-$(FAKEROOT_VERSION)
-FAKEROOT_DIR1:=$(BUILD_DIR)/fakeroot-$(FAKEROOT_VERSION)-host
-FAKEROOT_DIR2:=$(BUILD_DIR)/fakeroot-$(FAKEROOT_VERSION)-target
+FAKEROOT_LIBTOOL_PATCH=NO
+HOST_FAKEROOT_LIBTOOL_PATCH=NO
-$(DL_DIR)/$(FAKEROOT_SOURCE):
- $(call DOWNLOAD,$(FAKEROOT_SITE),$(FAKEROOT_SOURCE))
-
-fakeroot-source: $(DL_DIR)/$(FAKEROOT_SOURCE)
-
-$(FAKEROOT_SOURCE_DIR)/.unpacked: $(DL_DIR)/$(FAKEROOT_SOURCE)
- $(FAKEROOT_CAT) $(DL_DIR)/$(FAKEROOT_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
+define FAKEROOT_PATCH_FAKEROOT_IN
# If using busybox getopt, make it be quiet.
$(SED) "s,getopt --version,getopt --version 2>/dev/null," \
- $(FAKEROOT_SOURCE_DIR)/scripts/fakeroot.in
- toolchain/patch-kernel.sh $(FAKEROOT_SOURCE_DIR) package/fakeroot/ \*.patch
- touch $@
-
-
-#############################################################
-#
-# build fakeroot for use on the host system
-#
-#############################################################
+ $(@D)/scripts/fakeroot.in
+endef
-$(FAKEROOT_DIR1)/.configured: $(FAKEROOT_SOURCE_DIR)/.unpacked
- mkdir -p $(FAKEROOT_DIR1)
- (cd $(FAKEROOT_DIR1); rm -rf config.cache; \
- CC="$(HOSTCC)" \
- $(FAKEROOT_SOURCE_DIR)/configure $(QUIET) \
- --prefix=$(HOST_DIR)/usr \
- )
- touch $@
+FAKEROOT_POST_PATCH_HOOKS += FAKEROOT_PATCH_FAKEROOT_IN
-$(FAKEROOT_DIR1)/faked: $(FAKEROOT_DIR1)/.configured
- $(MAKE) -C $(FAKEROOT_DIR1)
- touch -c $@
-
-$(HOST_DIR)/usr/bin/fakeroot: $(FAKEROOT_DIR1)/faked
- $(MAKE) -C $(FAKEROOT_DIR1) install
- touch -c $@
-
-host-fakeroot: $(HOST_DIR)/usr/bin/fakeroot
-
-host-fakeroot-clean:
- -$(MAKE) -C $(FAKEROOT_DIR1) clean
-
-host-fakeroot-dirclean:
- rm -rf $(FAKEROOT_DIR1)
-
-
-#############################################################
-#
-# build fakeroot for use on the target system
-#
-#############################################################
-
-$(FAKEROOT_DIR2)/.configured: $(FAKEROOT_SOURCE_DIR)/.unpacked
- mkdir -p $(FAKEROOT_DIR2)
- (cd $(FAKEROOT_DIR2); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- $(TARGET_CONFIGURE_ARGS) \
- $(FAKEROOT_SOURCE_DIR)/configure $(QUIET) \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libdir=/usr/lib/libfakeroot \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/share/man \
- --infodir=/usr/share/info \
- $(DISABLE_NLS) \
- )
- touch $@
-
-$(FAKEROOT_DIR2)/faked: $(FAKEROOT_DIR2)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(FAKEROOT_DIR2)
- touch -c $@
-
-$(TARGET_DIR)/usr/bin/fakeroot: $(FAKEROOT_DIR2)/faked
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(FAKEROOT_DIR2) install
- -mv $(TARGET_DIR)/usr/bin/$(ARCH)-linux-faked \
+define FAKEROOT_RENAME_TARGET_BINARIES
+ -mv $(TARGET_DIR)/usr/bin/$(ARCH)-*-faked \
$(TARGET_DIR)/usr/bin/faked
- -mv $(TARGET_DIR)/usr/bin/$(ARCH)-linux-fakeroot \
+ -mv $(TARGET_DIR)/usr/bin/$(ARCH)-*-fakeroot \
$(TARGET_DIR)/usr/bin/fakeroot
-ifneq ($(BR2_HAVE_INFOPAGES),y)
- rm -rf $(TARGET_DIR)/usr/share/info
-endif
-ifneq ($(BR2_HAVE_MANPAGES),y)
- rm -rf $(TARGET_DIR)/usr/share/man
-endif
- rm -rf $(TARGET_DIR)/share/locale
- rm -rf $(TARGET_DIR)/usr/share/doc
- touch -c $@
-
-fakeroot: $(TARGET_DIR)/usr/bin/fakeroot
+endef
-fakeroot-clean:
- -$(MAKE) -C $(FAKEROOT_DIR2) clean
- rm -f $(TARGET_DIR)/usr/bin/fake{d,root}
-
-fakeroot-dirclean:
- rm -rf $(FAKEROOT_DIR2)
-
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_PACKAGE_FAKEROOT),y)
-TARGETS+=fakeroot
-endif
+FAKEROOT_POST_INSTALL_TARGET_HOOKS += FAKEROOT_RENAME_TARGET_BINARIES
-ifeq ($(BR2_HOST_FAKEROOT),y)
-HOST_SOURCE+=fakeroot-source
-endif
+$(eval $(call AUTOTARGETS,package,fakeroot))
+$(eval $(call AUTOTARGETS,package,fakeroot,host))
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 24/44] fakeroot: remove all references to BR2_HOST_FAKEROOT
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (22 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 23/44] fakeroot: convert to the autotools infrastructure Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 25/44] target/: remove the COPYTO mess Thomas Petazzoni
` (21 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
configs/at91rm9200df_defconfig | 1 -
configs/at91rm9200df_ext_defconfig | 1 -
configs/at91sam9260dfc_defconfig | 1 -
configs/at91sam9260dfc_ext_defconfig | 1 -
configs/at91sam9260pf_defconfig | 1 -
configs/at91sam9261ek_defconfig | 1 -
configs/at91sam9261ek_ext_defconfig | 1 -
configs/at91sam9263ek_defconfig | 1 -
configs/at91sam9263ek_ext_defconfig | 1 -
configs/at91sam9g20dfc_defconfig | 1 -
configs/at91sam9g20dfc_ext_defconfig | 1 -
configs/atngw100-base_defconfig | 1 -
configs/atngw100_defconfig | 1 -
configs/atstk1005_defconfig | 1 -
configs/atstk100x_defconfig | 1 -
configs/i386_defconfig | 1 -
configs/i686_defconfig | 1 -
configs/integrator926_defconfig | 1 -
configs/integrator926_huge_defconfig | 1 -
configs/kb9202_defconfig | 1 -
configs/v100sc2_defconfig | 1 -
scripts/test/Config.in.test.buildall | 1 -
target/xtensa/defconfig | 1 -
23 files changed, 0 insertions(+), 23 deletions(-)
diff --git a/configs/at91rm9200df_defconfig b/configs/at91rm9200df_defconfig
index 3d98b0f..d5c5249 100644
--- a/configs/at91rm9200df_defconfig
+++ b/configs/at91rm9200df_defconfig
@@ -353,7 +353,6 @@ BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
BR2_PACKAGE_GETTEXT=y
# BR2_PACKAGE_GETTEXT_STATIC is not set
BR2_PACKAGE_LIBINTL=y
diff --git a/configs/at91rm9200df_ext_defconfig b/configs/at91rm9200df_ext_defconfig
index 1dea062..ca03b76 100644
--- a/configs/at91rm9200df_ext_defconfig
+++ b/configs/at91rm9200df_ext_defconfig
@@ -278,7 +278,6 @@ BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
BR2_PACKAGE_GETTEXT=y
# BR2_PACKAGE_GETTEXT_STATIC is not set
BR2_PACKAGE_LIBINTL=y
diff --git a/configs/at91sam9260dfc_defconfig b/configs/at91sam9260dfc_defconfig
index 1b4094e..2d8961c 100644
--- a/configs/at91sam9260dfc_defconfig
+++ b/configs/at91sam9260dfc_defconfig
@@ -365,7 +365,6 @@ BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
BR2_PACKAGE_GETTEXT=y
# BR2_PACKAGE_GETTEXT_STATIC is not set
BR2_PACKAGE_LIBINTL=y
diff --git a/configs/at91sam9260dfc_ext_defconfig b/configs/at91sam9260dfc_ext_defconfig
index 14bdc7a..ddd4b42 100644
--- a/configs/at91sam9260dfc_ext_defconfig
+++ b/configs/at91sam9260dfc_ext_defconfig
@@ -286,7 +286,6 @@ BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
BR2_PACKAGE_GETTEXT=y
# BR2_PACKAGE_GETTEXT_STATIC is not set
BR2_PACKAGE_LIBINTL=y
diff --git a/configs/at91sam9260pf_defconfig b/configs/at91sam9260pf_defconfig
index de513a6..17477d2 100644
--- a/configs/at91sam9260pf_defconfig
+++ b/configs/at91sam9260pf_defconfig
@@ -275,7 +275,6 @@ BR2_PACKAGE_DISTCC=y
BR2_PACKAGE_DMALLOC=y
BR2_PACKAGE_EXPAT=y
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
BR2_PACKAGE_GETTEXT=y
# BR2_PACKAGE_GETTEXT_STATIC is not set
BR2_PACKAGE_LIBINTL=y
diff --git a/configs/at91sam9261ek_defconfig b/configs/at91sam9261ek_defconfig
index 9598085..824a503 100644
--- a/configs/at91sam9261ek_defconfig
+++ b/configs/at91sam9261ek_defconfig
@@ -359,7 +359,6 @@ BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
BR2_PACKAGE_GETTEXT=y
# BR2_PACKAGE_GETTEXT_STATIC is not set
BR2_PACKAGE_LIBINTL=y
diff --git a/configs/at91sam9261ek_ext_defconfig b/configs/at91sam9261ek_ext_defconfig
index e7da95a..3ee047c 100644
--- a/configs/at91sam9261ek_ext_defconfig
+++ b/configs/at91sam9261ek_ext_defconfig
@@ -317,7 +317,6 @@ BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
BR2_PACKAGE_GETTEXT=y
# BR2_PACKAGE_GETTEXT_STATIC is not set
BR2_PACKAGE_LIBINTL=y
diff --git a/configs/at91sam9263ek_defconfig b/configs/at91sam9263ek_defconfig
index 145700d..8dff3e4 100644
--- a/configs/at91sam9263ek_defconfig
+++ b/configs/at91sam9263ek_defconfig
@@ -358,7 +358,6 @@ BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
BR2_PACKAGE_GETTEXT=y
# BR2_PACKAGE_GETTEXT_STATIC is not set
BR2_PACKAGE_LIBINTL=y
diff --git a/configs/at91sam9263ek_ext_defconfig b/configs/at91sam9263ek_ext_defconfig
index 15b4d3b..a84cc7a 100644
--- a/configs/at91sam9263ek_ext_defconfig
+++ b/configs/at91sam9263ek_ext_defconfig
@@ -279,7 +279,6 @@ BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
BR2_PACKAGE_GETTEXT=y
# BR2_PACKAGE_GETTEXT_STATIC is not set
BR2_PACKAGE_LIBINTL=y
diff --git a/configs/at91sam9g20dfc_defconfig b/configs/at91sam9g20dfc_defconfig
index a6ef10c..3f7da32 100644
--- a/configs/at91sam9g20dfc_defconfig
+++ b/configs/at91sam9g20dfc_defconfig
@@ -358,7 +358,6 @@ BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
BR2_PACKAGE_GETTEXT=y
# BR2_PACKAGE_GETTEXT_STATIC is not set
BR2_PACKAGE_LIBINTL=y
diff --git a/configs/at91sam9g20dfc_ext_defconfig b/configs/at91sam9g20dfc_ext_defconfig
index 96d9793..84d703a 100644
--- a/configs/at91sam9g20dfc_ext_defconfig
+++ b/configs/at91sam9g20dfc_ext_defconfig
@@ -286,7 +286,6 @@ BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
BR2_PACKAGE_GETTEXT=y
# BR2_PACKAGE_GETTEXT_STATIC is not set
BR2_PACKAGE_LIBINTL=y
diff --git a/configs/atngw100-base_defconfig b/configs/atngw100-base_defconfig
index 6fbc0de..adae5c6 100644
--- a/configs/atngw100-base_defconfig
+++ b/configs/atngw100-base_defconfig
@@ -275,7 +275,6 @@ BR2_PACKAGE_BUSYBOX_SKELETON=y
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
# BR2_PACKAGE_GETTEXT is not set
# BR2_PACKAGE_LIBINTL is not set
# BR2_PACKAGE_LIBGMP is not set
diff --git a/configs/atngw100_defconfig b/configs/atngw100_defconfig
index 7a6cba4..0c76398 100644
--- a/configs/atngw100_defconfig
+++ b/configs/atngw100_defconfig
@@ -286,7 +286,6 @@ BR2_PACKAGE_BUSYBOX_SKELETON=y
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
BR2_PACKAGE_GETTEXT=y
BR2_PACKAGE_LIBINTL=y
# BR2_PACKAGE_LIBGMP is not set
diff --git a/configs/atstk1005_defconfig b/configs/atstk1005_defconfig
index 309ac08..8044b38 100644
--- a/configs/atstk1005_defconfig
+++ b/configs/atstk1005_defconfig
@@ -297,7 +297,6 @@ BR2_PACKAGE_BUSYBOX_SKELETON=y
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
BR2_PACKAGE_GETTEXT=y
BR2_PACKAGE_LIBINTL=y
# BR2_PACKAGE_LIBGMP is not set
diff --git a/configs/atstk100x_defconfig b/configs/atstk100x_defconfig
index b4abff9..aac5aa8 100644
--- a/configs/atstk100x_defconfig
+++ b/configs/atstk100x_defconfig
@@ -297,7 +297,6 @@ BR2_PACKAGE_BZIP2=y
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
BR2_PACKAGE_GETTEXT=y
BR2_PACKAGE_LIBINTL=y
# BR2_PACKAGE_LIBGMP is not set
diff --git a/configs/i386_defconfig b/configs/i386_defconfig
index 97067c4..f4506f1 100644
--- a/configs/i386_defconfig
+++ b/configs/i386_defconfig
@@ -285,7 +285,6 @@ BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
# BR2_PACKAGE_GETTEXT is not set
# BR2_PACKAGE_LIBINTL is not set
# BR2_PACKAGE_LIBGMP is not set
diff --git a/configs/i686_defconfig b/configs/i686_defconfig
index a3a2683..fc1f278 100644
--- a/configs/i686_defconfig
+++ b/configs/i686_defconfig
@@ -285,7 +285,6 @@ BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
# BR2_PACKAGE_GETTEXT is not set
# BR2_PACKAGE_LIBINTL is not set
# BR2_PACKAGE_LIBGMP is not set
diff --git a/configs/integrator926_defconfig b/configs/integrator926_defconfig
index 63bc68d..e985df4 100644
--- a/configs/integrator926_defconfig
+++ b/configs/integrator926_defconfig
@@ -282,7 +282,6 @@ BR2_PACKAGE_BUSYBOX_SKELETON=y
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
# BR2_PACKAGE_GETTEXT is not set
# BR2_PACKAGE_LIBINTL is not set
# BR2_PACKAGE_LIBGMP is not set
diff --git a/configs/integrator926_huge_defconfig b/configs/integrator926_huge_defconfig
index 357e143..b0d1dfe 100644
--- a/configs/integrator926_huge_defconfig
+++ b/configs/integrator926_huge_defconfig
@@ -286,7 +286,6 @@ BR2_PACKAGE_BISON=y
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
BR2_PACKAGE_GETTEXT=y
# BR2_PACKAGE_GETTEXT_STATIC is not set
BR2_PACKAGE_LIBINTL=y
diff --git a/configs/kb9202_defconfig b/configs/kb9202_defconfig
index 608eb86..3a0dfd6 100644
--- a/configs/kb9202_defconfig
+++ b/configs/kb9202_defconfig
@@ -286,7 +286,6 @@ BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
# BR2_PACKAGE_GETTEXT is not set
# BR2_PACKAGE_LIBINTL is not set
# BR2_PACKAGE_LIBGMP is not set
diff --git a/configs/v100sc2_defconfig b/configs/v100sc2_defconfig
index 336953e..3c2afa4 100644
--- a/configs/v100sc2_defconfig
+++ b/configs/v100sc2_defconfig
@@ -267,7 +267,6 @@ BR2_PACKAGE_BASH=y
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
BR2_PACKAGE_GETTEXT=y
BR2_PACKAGE_LIBINTL=y
# BR2_PACKAGE_LIBGMP is not set
diff --git a/scripts/test/Config.in.test.buildall b/scripts/test/Config.in.test.buildall
index b5bb050..1acb466 100644
--- a/scripts/test/Config.in.test.buildall
+++ b/scripts/test/Config.in.test.buildall
@@ -29,7 +29,6 @@ config BR2_TARGET_TEST_PACKAGES
select BR2_PACKAGE_DISTCC
select BR2_PACKAGE_DMALLOC
select BR2_PACKAGE_FAKEROOT
- select BR2_HOST_FAKEROOT
select BR2_PACKAGE_GETTEXT
select BR2_PACKAGE_GETTEXT_STATIC
select BR2_PACKAGE_LIBINTL
diff --git a/target/xtensa/defconfig b/target/xtensa/defconfig
index 07ab10b..f9b53a3 100644
--- a/target/xtensa/defconfig
+++ b/target/xtensa/defconfig
@@ -94,7 +94,6 @@ BR2_TOOLCHAIN_BUILDROOT=y
#
# Other development stuff
#
-BR2_HOST_FAKEROOT=y
# BR2_PACKAGE_LIBINTL is not set
# For NFS mount:
BR2_PACKAGE_PORTMAP=y
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 25/44] target/: remove the COPYTO mess
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (23 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 24/44] fakeroot: remove all references to BR2_HOST_FAKEROOT Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 26/44] target: Add new infrastructure for filesystem generation Thomas Petazzoni
` (20 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
There's no need to provide options to copy the filesystem image after
the build. Just use 'cp' outside of Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/cpio/Config.in | 9 ---------
target/cpio/cpioroot.mk | 10 ----------
target/ext2/Config.in | 8 --------
target/ext2/ext2root.mk | 6 ------
target/jffs2/Config.in | 6 ------
target/jffs2/jffs2root.mk | 5 -----
target/tar/Config.in | 11 -----------
target/tar/tarroot.mk | 4 ----
target/ubifs/Config.in | 8 --------
target/ubifs/ubifsroot.mk | 5 -----
10 files changed, 0 insertions(+), 72 deletions(-)
diff --git a/target/cpio/Config.in b/target/cpio/Config.in
index 4ee1037..02fd00d 100644
--- a/target/cpio/Config.in
+++ b/target/cpio/Config.in
@@ -38,12 +38,3 @@ config BR2_TARGET_ROOTFS_CPIO_LZMA
endchoice
-config BR2_TARGET_ROOTFS_CPIO_COPYTO
- string "also copy the image to..."
- depends on BR2_TARGET_ROOTFS_CPIO
- default ""
- help
- Copies the resulting image to a secondary location
- like a tftp server's root directory.
-
- Example: $(IMAGE)-$(DATE).cpio$(CPIO_ROOTFS_COMPRESSOR_EXT)
diff --git a/target/cpio/cpioroot.mk b/target/cpio/cpioroot.mk
index 021847f..0984b72 100644
--- a/target/cpio/cpioroot.mk
+++ b/target/cpio/cpioroot.mk
@@ -29,8 +29,6 @@ else
CPIO_TARGET := $(CPIO_BASE)
endif
-ROOTFS_CPIO_COPYTO:=$(call qstrip,$(BR2_TARGET_ROOTFS_CPIO_COPYTO))
-
cpioroot-init:
rm -f $(TARGET_DIR)/init
ln -s sbin/init $(TARGET_DIR)/init
@@ -52,18 +50,10 @@ endif
chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
$(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
- at rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
-ifeq ($(CPIO_ROOTFS_COMPRESSOR),)
-ifneq ($(ROOTFS_CPIO_COPYTO),)
- $(Q)cp -f $(CPIO_BASE) $(ROOTFS_CPIO_COPYTO)
-endif
-endif
ifneq ($(CPIO_ROOTFS_COMPRESSOR),)
$(CPIO_BASE).$(CPIO_ROOTFS_COMPRESSOR_EXT): $(CPIO_ROOTFS_COMPRESSOR_PREREQ) $(CPIO_BASE)
$(CPIO_ROOTFS_COMPRESSOR) $(CPIO_BASE) > $(CPIO_TARGET)
-ifneq ($(ROOTFS_CPIO_COPYTO),)
- $(Q)cp -f $(CPIO_BASE).$(CPIO_ROOTFS_COMPRESSOR_EXT) $(ROOTFS_CPIO_COPYTO).$(CPIO_ROOTFS_COMPRESSOR_EXT)
-endif
endif
#############################################################
diff --git a/target/ext2/Config.in b/target/ext2/Config.in
index 1b1dc8a..0047309 100644
--- a/target/ext2/Config.in
+++ b/target/ext2/Config.in
@@ -64,11 +64,3 @@ config BR2_TARGET_ROOTFS_EXT2_LZMA
endchoice
-config BR2_TARGET_ROOTFS_EXT2_COPYTO
- string "also copy the image to..."
- depends on BR2_TARGET_ROOTFS_EXT2
- default ""
- help
- Copies the resulting image to a secondary location
- like a tftp server's root directory.
-
diff --git a/target/ext2/ext2root.mk b/target/ext2/ext2root.mk
index 6c8e02a..145b182 100644
--- a/target/ext2/ext2root.mk
+++ b/target/ext2/ext2root.mk
@@ -82,13 +82,7 @@ $(EXT2_BASE).$(EXT2_ROOTFS_COMPRESSOR_EXT): $(EXT2_ROOTFS_COMPRESSOR_PREREQ) $(E
$(EXT2_ROOTFS_COMPRESSOR) $(EXT2_BASE) > $(EXT2_TARGET)
endif
-EXT2_COPYTO := $(call qstrip,$(BR2_TARGET_ROOTFS_EXT2_COPYTO))
-
ext2root: $(EXT2_TARGET)
- @ls -l $(EXT2_TARGET)
-ifneq ($(EXT2_COPYTO),)
- @cp -f $(EXT2_TARGET) $(EXT2_COPYTO)
-endif
#############################################################
#
diff --git a/target/jffs2/Config.in b/target/jffs2/Config.in
index bf4ac60..a216a27 100644
--- a/target/jffs2/Config.in
+++ b/target/jffs2/Config.in
@@ -118,10 +118,4 @@ config BR2_TARGET_ROOTFS_JFFS2_OUTPUT
string "Output File"
default "$(IMAGE).jffs2"
-config BR2_TARGET_ROOTFS_JFFS2_COPYTO
- string "also copy the image to..."
- default ""
- help
- Copies the resulting image to a secondary location.
-
endif
diff --git a/target/jffs2/jffs2root.mk b/target/jffs2/jffs2root.mk
index 30ac86d..eea0e3a 100644
--- a/target/jffs2/jffs2root.mk
+++ b/target/jffs2/jffs2root.mk
@@ -74,12 +74,7 @@ ifeq ($(BR2_JFFS2_TARGET_SREC),y)
@ls -l $(JFFS2_TARGET).srec
endif
-JFFS2_COPYTO := $(call qstrip,$(BR2_TARGET_ROOTFS_JFFS2_COPYTO))
-
jffs2root: $(JFFS2_TARGET)
-ifneq ($(JFFS2_COPYTO),)
- @cp -f $(JFFS2_TARGET) $(JFFS2_COPYTO)
-endif
#############################################################
#
diff --git a/target/tar/Config.in b/target/tar/Config.in
index ae02409..0adca79 100644
--- a/target/tar/Config.in
+++ b/target/tar/Config.in
@@ -45,14 +45,3 @@ config BR2_TARGET_ROOTFS_TAR_OPTIONS
help
Any other flags you want to pass to tar
Refer to tar --help for details
-
-config BR2_TARGET_ROOTFS_TAR_COPYTO
- string "also copy the image to..."
- depends on BR2_TARGET_ROOTFS_TAR
- default ""
- help
- Copies the resulting image to a secondary location
- like a tftp server's root directory.
-
- Example: $(IMAGE)-$(DATE).tar
-
diff --git a/target/tar/tarroot.mk b/target/tar/tarroot.mk
index d082672..cd01bc7 100644
--- a/target/tar/tarroot.mk
+++ b/target/tar/tarroot.mk
@@ -21,7 +21,6 @@ ifeq ($(BR2_TARGET_ROOTFS_TAR_LZMA),y)
TAR_COMPRESSOR:=lzma -9 -c
TAR_COMPRESSOR_EXT:=lzma
endif
-ROOTFS_TAR_COPYTO:=$(call qstrip,$(BR2_TARGET_ROOTFS_TAR_COPYTO))
tarroot: host-fakeroot makedevs
# Use fakeroot to pretend all target binaries are owned by root
@@ -43,9 +42,6 @@ ifneq ($(TAR_COMPRESSOR),)
-rm -f $(TAR_TARGET).$()
PATH="$(STAGING_DIR)/sbin:$(STAGING_DIR)/bin:$(STAGING_DIR)/usr/sbin:$(STAGING_DIR)/usr/bin:$(PATH)" $(TAR_COMPRESSOR) $(TAR_TARGET) > $(TAR_TARGET).$(TAR_COMPRESSOR_EXT)
endif
-ifneq ($(ROOTFS_TAR_COPYTO),)
- $(Q)cp -f $(TAR_TARGET) $(ROOTFS_TAR_COPYTO)
-endif
- at rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
#############################################################
diff --git a/target/ubifs/Config.in b/target/ubifs/Config.in
index 1ce1ab0..3222fea 100644
--- a/target/ubifs/Config.in
+++ b/target/ubifs/Config.in
@@ -91,11 +91,3 @@ config BR2_TARGET_ROOTFS_UBIFS_LZMA
endchoice
-config BR2_TARGET_ROOTFS_UBIFS_COPYTO
- string "also copy the image to..."
- depends on BR2_TARGET_ROOTFS_UBIFS
- default ""
- help
- Copies the resulting image to a secondary location
- like a tftp server's root directory.
-
diff --git a/target/ubifs/ubifsroot.mk b/target/ubifs/ubifsroot.mk
index b48e10f..d0f3885 100644
--- a/target/ubifs/ubifsroot.mk
+++ b/target/ubifs/ubifsroot.mk
@@ -64,13 +64,8 @@ $(UBIFS_BASE).$(UBIFS_ROOTFS_COMPRESSOR_EXT): $(UBIFS_ROOTFS_COMPRESSOR_PREREQ)
$(UBIFS_ROOTFS_COMPRESSOR) $(UBIFS_BASE) > $(UBIFS_TARGET)
endif
-UBIFS_COPYTO := $(call qstrip,$(BR2_TARGET_ROOTFS_UBIFS_COPYTO))
-
ubifsroot: $(UBIFS_TARGET)
@ls -l $(UBIFS_TARGET)
-ifneq ($(UBIFS_COPYTO),)
- @cp -f $(UBIFS_TARGET) $(UBIFS_COPYTO)
-endif
#############################################################
#
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 26/44] target: Add new infrastructure for filesystem generation
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (24 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 25/44] target/: remove the COPYTO mess Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 27/44] cloop: convert to ROOTFS_TARGET infrastructure Thomas Petazzoni
` (19 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
In order to avoid code duplication between the different filesystem
generation makefile, we introduce a ROOTFS_TARGET macro. Documentation
for this macro is contained in the patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/Makefile.in | 1 +
target/common.mk | 68 ++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 69 insertions(+), 0 deletions(-)
create mode 100644 target/common.mk
diff --git a/target/Makefile.in b/target/Makefile.in
index df980b4..38993e5 100644
--- a/target/Makefile.in
+++ b/target/Makefile.in
@@ -63,6 +63,7 @@ include target/u-boot/Makefile.in
endif
# and finally build the filesystems/tarballs
+include target/common.mk
include target/*/*.mk
# kernel rules
diff --git a/target/common.mk b/target/common.mk
new file mode 100644
index 0000000..c7eff74
--- /dev/null
+++ b/target/common.mk
@@ -0,0 +1,68 @@
+#
+# Macro that builds the needed Makefile target to create a root
+# filesystem image.
+#
+# The following variable must be defined before calling this macro
+#
+# ROOTFS_$(FSTYPE)_CMD, the command that generates the root
+# filesystem image. A single command is allowed. The filename of the
+# filesystem image that it must generate is $$@.
+#
+# The following variables can optionaly be defined
+#
+# ROOTFS_$(FSTYPE)_DEPENDENCIES, the list of dependencies needed to
+# build the root filesystem (usually host tools)
+#
+# ROOTFS_$(FSTYPE)_PRE_GEN_HOOKS, a list of hooks to call before
+# generating the filesystem image
+#
+# ROOTFS_$(FSTYPE)_POST_GEN_HOOKS, a list of hooks to call after
+# generating the filesystem image
+#
+# In terms of configuration option, this macro assumes that the
+# BR2_TARGET_ROOTFS_$(FSTYPE) config option allows to enable/disable
+# the generation of a filesystem image of a particular type. If
+# configura options BR2_TARGET_ROOTFS_$(FSTYPE)_GZIP,
+# BR2_TARGET_ROOTFS_$(FSTYPE)_BZIP2 or
+# BR2_TARGET_ROOTFS_$(FSTYPE)_LZMA exist and are enabled, then the
+# macro will automatically generate a compressed filesystem image.
+
+FAKEROOT_SCRIPT = $(BUILD_DIR)/_fakeroot.fs
+
+define ROOTFS_TARGET_INTERNAL
+
+$(IMAGE).$(1): $(ROOTFS_$(2)_DEPENDENCIES) host-fakeroot makedevs $(if $(BR2_TARGET_ROOTFS_$(2)_LZMA),host-lzma)
+ @$(call MESSAGE,"Generating root filesystem image $(IMAGE).$(1)")
+ $(foreach hook,$(ROOTFS_$(2)_PRE_GEN_HOOKS),$(call $(hook))$(sep))
+ rm -f $(FAKEROOT_SCRIPT)
+ touch $(BUILD_DIR)/.fakeroot.00000
+ cat $(BUILD_DIR)/.fakeroot* > $(FAKEROOT_SCRIPT)
+ echo "chown -R 0:0 $(TARGET_DIR)" >> $(FAKEROOT_SCRIPT)
+ifneq ($(TARGET_DEVICE_TABLE),)
+ echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" >> $(FAKEROOT_SCRIPT)
+endif
+ echo "$(ROOTFS_$(2)_CMD)" >> $(FAKEROOT_SCRIPT)
+ chmod a+x $(FAKEROOT_SCRIPT)
+ $(HOST_DIR)/usr/bin/fakeroot -- $(FAKEROOT_SCRIPT)
+ - at rm -f $(FAKEROOT_SCRIPT)
+ $(foreach hook,$(ROOTFS_$(2)_POST_GEN_HOOKS),$(call $(hook))$(sep))
+ifeq ($$(BR2_TARGET_ROOTFS_$(2)_GZIP),y)
+ gzip -9 -c $$@ > $$@.gz
+endif
+ifeq ($$(BR2_TARGET_ROOTFS_$(2)_BZIP2),y)
+ bzip2 -9 -c $$@ > $$@.bz2
+endif
+ifeq ($$(BR2_TARGET_ROOTFS_$(2)_LZMA),y)
+ $(LZMA) -9 -c $$@ > $$@.lzma
+endif
+
+$(1)-root: $(IMAGE).$(1)
+
+ifeq ($$(BR2_TARGET_ROOTFS_$(2)),y)
+TARGETS += $(1)-root
+endif
+endef
+
+define ROOTFS_TARGET
+$(call ROOTFS_TARGET_INTERNAL,$(1),$(call UPPERCASE,$(1)))
+endef
\ No newline at end of file
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 27/44] cloop: convert to ROOTFS_TARGET infrastructure
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (25 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 26/44] target: Add new infrastructure for filesystem generation Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 28/44] cpio: " Thomas Petazzoni
` (18 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/cloop/cloop.mk | 26 +++++---------------------
1 files changed, 5 insertions(+), 21 deletions(-)
diff --git a/target/cloop/cloop.mk b/target/cloop/cloop.mk
index ccdb2b4..c1d6abb 100644
--- a/target/cloop/cloop.mk
+++ b/target/cloop/cloop.mk
@@ -4,26 +4,10 @@
#
#############################################################
-CLOOP_TARGET=$(IMAGE).cloop
-CLOOP_FAKEROOT_SCRIPT=$(BUILD_DIR)/_fakeroot.$(notdir $(CLOOP_TARGET))
+ROOTFS_CLOOP_DEPENDENCIES = host-cloop host-cdrkit
-clooproot: host-cloop host-cdrkit host-fakeroot
- rm -f $(CLOOP_FAKEROOT_SCRIPT)
- touch $(BUILD_DIR)/.fakeroot.00000
- cat $(BUILD_DIR)/.fakeroot* > $(CLOOP_FAKEROOT_SCRIPT)
- # Use fakeroot to pretend all target binaries are owned by root
- echo "chown -R 0:0 $(TARGET_DIR)" >> $(CLOOP_FAKEROOT_SCRIPT)
-ifneq ($(TARGET_DEVICE_TABLE),)
- # Use fakeroot to pretend to create all needed device nodes
- echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
- >> $(CLOOP_FAKEROOT_SCRIPT)
-endif
- # Use fakeroot so genisoimage believes the previous fakery
- echo "$(HOST_DIR)/usr/bin/genisoimage -r $(TARGET_DIR) | $(HOST_DIR)/usr/bin/create_compressed_fs - 65536 > $(CLOOP_TARGET)" >> $(CLOOP_FAKEROOT_SCRIPT)
- chmod a+x $(CLOOP_FAKEROOT_SCRIPT)
- $(HOST_DIR)/usr/bin/fakeroot -- $(CLOOP_FAKEROOT_SCRIPT)
- - at rm -f $(CLOOP_FAKEROOT_SCRIPT)
+define ROOTFS_CLOOP_CMD
+ $(HOST_DIR)/usr/bin/genisoimage -r $(TARGET_DIR) | $(HOST_DIR)/usr/bin/create_compressed_fs - 65536 > $$@
+endef
-ifeq ($(BR2_TARGET_ROOTFS_CLOOP),y)
-TARGETS+=clooproot
-endif
+$(eval $(call ROOTFS_TARGET,cloop))
\ No newline at end of file
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 28/44] cpio: convert to ROOTFS_TARGET infrastructure
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (26 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 27/44] cloop: convert to ROOTFS_TARGET infrastructure Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 29/44] cramfs: " Thomas Petazzoni
` (17 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/cpio/cpioroot.mk | 62 +++++-----------------------------------------
1 files changed, 7 insertions(+), 55 deletions(-)
diff --git a/target/cpio/cpioroot.mk b/target/cpio/cpioroot.mk
index 0984b72..ab7d546 100644
--- a/target/cpio/cpioroot.mk
+++ b/target/cpio/cpioroot.mk
@@ -4,63 +4,15 @@
#
#############################################################
-CPIO_BASE:=$(IMAGE).cpio
-
-CPIO_ROOTFS_COMPRESSOR:=
-CPIO_ROOTFS_COMPRESSOR_EXT:=
-CPIO_ROOTFS_COMPRESSOR_PREREQ:=
-ifeq ($(BR2_TARGET_ROOTFS_CPIO_GZIP),y)
-CPIO_ROOTFS_COMPRESSOR:=gzip -9 -c
-CPIO_ROOTFS_COMPRESSOR_EXT:=gz
-endif
-ifeq ($(BR2_TARGET_ROOTFS_CPIO_BZIP2),y)
-CPIO_ROOTFS_COMPRESSOR:=bzip2 -9 -c
-CPIO_ROOTFS_COMPRESSOR_EXT:=bz2
-endif
-ifeq ($(BR2_TARGET_ROOTFS_CPIO_LZMA),y)
-CPIO_ROOTFS_COMPRESSOR:=$(LZMA) -9 -c
-CPIO_ROOTFS_COMPRESSOR_EXT:=lzma
-CPIO_ROOTFS_COMPRESSOR_PREREQ:= host-lzma
-endif
-
-ifneq ($(CPIO_ROOTFS_COMPRESSOR),)
-CPIO_TARGET := $(CPIO_BASE).$(CPIO_ROOTFS_COMPRESSOR_EXT)
-else
-CPIO_TARGET := $(CPIO_BASE)
-endif
-
-cpioroot-init:
+define ROOTFS_CPIO_INIT_SYMLINK
rm -f $(TARGET_DIR)/init
ln -s sbin/init $(TARGET_DIR)/init
+endef
-$(CPIO_BASE): host-fakeroot makedevs cpioroot-init
- # Use fakeroot to pretend all target binaries are owned by root
- rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
- touch $(BUILD_DIR)/.fakeroot.00000
- cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
- echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
-ifneq ($(TARGET_DEVICE_TABLE),)
- # Use fakeroot to pretend to create all needed device nodes
- echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
- >> $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
-endif
- # Use fakeroot so tar believes the previous fakery
- echo "cd $(TARGET_DIR) && find . | cpio --quiet -o -H newc > $(CPIO_BASE)" \
- >> $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
- chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
- $(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
- - at rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
+ROOTFS_CPIO_PRE_GEN_HOOKS += ROOTFS_CPIO_INIT_SYMLINK
-ifneq ($(CPIO_ROOTFS_COMPRESSOR),)
-$(CPIO_BASE).$(CPIO_ROOTFS_COMPRESSOR_EXT): $(CPIO_ROOTFS_COMPRESSOR_PREREQ) $(CPIO_BASE)
- $(CPIO_ROOTFS_COMPRESSOR) $(CPIO_BASE) > $(CPIO_TARGET)
-endif
+define ROOTFS_CPIO_CMD
+ cd $(TARGET_DIR) && find . | cpio --quiet -o -H newc > $$@
+endef
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_TARGET_ROOTFS_CPIO),y)
-TARGETS+=cpioroot
-endif
+$(eval $(call ROOTFS_TARGET,cpio))
\ No newline at end of file
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 29/44] cramfs: convert to ROOTFS_TARGET infrastructure
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (27 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 28/44] cpio: " Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 30/44] romfs: " Thomas Petazzoni
` (16 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/cramfs/cramfs.mk | 31 +++++--------------------------
1 files changed, 5 insertions(+), 26 deletions(-)
diff --git a/target/cramfs/cramfs.mk b/target/cramfs/cramfs.mk
index f431629..ccd316f 100644
--- a/target/cramfs/cramfs.mk
+++ b/target/cramfs/cramfs.mk
@@ -13,31 +13,10 @@ ifneq ($(TARGET_DEVICE_TABLE),)
CRAMFS_OPTS += -D $(TARGET_DEVICE_TABLE)
endif
-CRAMFS_TARGET=$(IMAGE).cramfs
+define ROOTFS_CRAMFS_CMD
+ $(HOST_DIR)/usr/bin/mkcramfs -q $(CRAMFS_OPTS) $(TARGET_DIR) $$@
+endef
-cramfsroot: host-fakeroot host-cramfs makedevs
- # Use fakeroot to pretend all target binaries are owned by root
- rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
- touch $(BUILD_DIR)/.fakeroot.00000
- cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
- echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
-ifneq ($(TARGET_DEVICE_TABLE),)
- # Use fakeroot to pretend to create all needed device nodes
- echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
- >> $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
-endif
- # Use fakeroot so mkcramfs believes the previous fakery
- echo "$(HOST_DIR)/usr/bin/mkcramfs -q $(CRAMFS_OPTS) " \
- "$(TARGET_DIR) $(CRAMFS_TARGET)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
- chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
- $(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
- - at rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
+ROOTFS_CRAMFS_DEPENDENCIES = host-cramfs
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_TARGET_ROOTFS_CRAMFS),y)
-TARGETS+=cramfsroot
-endif
+$(eval $(call ROOTFS_TARGET,cramfs))
\ No newline at end of file
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 30/44] romfs: convert to ROOTFS_TARGET infrastructure
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (28 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 29/44] cramfs: " Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 31/44] tar: " Thomas Petazzoni
` (15 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/romfs/romfs.mk | 30 ++++++------------------------
1 files changed, 6 insertions(+), 24 deletions(-)
diff --git a/target/romfs/romfs.mk b/target/romfs/romfs.mk
index e4b8ff5..9719478 100644
--- a/target/romfs/romfs.mk
+++ b/target/romfs/romfs.mk
@@ -6,28 +6,10 @@
ROMFS_TARGET=$(IMAGE).romfs
-romfsroot: host-fakeroot host-genromfs makedevs
- # Use fakeroot to pretend all target binaries are owned by root
- rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
- touch $(BUILD_DIR)/.fakeroot.00000
- cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
- echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
-ifneq ($(TARGET_DEVICE_TABLE),)
- # Use fakeroot to pretend to create all needed device nodes
- echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
- >> $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
-endif
- # Use fakeroot so genromfs believes the previous fakery
- echo "$(HOST_DIR)/usr/bin/genromfs -d $(TARGET_DIR) -f $(ROMFS_TARGET)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
- chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
- $(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
- - at rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
+ROOTFS_ROMFS_DEPENDENCIES = host-genromfs
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_TARGET_ROOTFS_ROMFS),y)
-TARGETS+=romfsroot
-endif
+define ROOTFS_ROMFS_CMD
+ $(HOST_DIR)/usr/bin/genromfs -d $(TARGET_DIR) -f $$@
+endef
+
+$(eval $(call ROOTFS_TARGET,romfs))
\ No newline at end of file
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 31/44] tar: convert to ROOTFS_TARGET infrastructure
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (29 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 30/44] romfs: " Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 32/44] squashfs: " Thomas Petazzoni
` (14 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/tar/tarroot.mk | 49 ++++---------------------------------------------
1 files changed, 4 insertions(+), 45 deletions(-)
diff --git a/target/tar/tarroot.mk b/target/tar/tarroot.mk
index cd01bc7..4d435cb 100644
--- a/target/tar/tarroot.mk
+++ b/target/tar/tarroot.mk
@@ -5,50 +5,9 @@
#############################################################
TAR_OPTS:=$(BR2_TARGET_ROOTFS_TAR_OPTIONS)
-TAR_TARGET:=$(IMAGE).tar
-TAR_COMPRESSOR:=
-TAR_COMPRESSOR_EXT:=.none
-ifeq ($(BR2_TARGET_ROOTFS_TAR_GZIP),y)
-TAR_COMPRESSOR:=gzip -9 -c
-TAR_COMPRESSOR_EXT:=gz
-endif
-ifeq ($(BR2_TARGET_ROOTFS_TAR_BZIP2),y)
-TAR_COMPRESSOR:=bzip2 -9 -c
-TAR_COMPRESSOR_EXT:=bz2
-endif
-ifeq ($(BR2_TARGET_ROOTFS_TAR_LZMA),y)
-TAR_COMPRESSOR:=lzma -9 -c
-TAR_COMPRESSOR_EXT:=lzma
-endif
+define ROOTFS_TAR_CMD
+ tar -c$(TAR_OPTS)f $$@ -C $(TARGET_DIR) .
+endef
-tarroot: host-fakeroot makedevs
- # Use fakeroot to pretend all target binaries are owned by root
- rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
- touch $(BUILD_DIR)/.fakeroot.00000
- cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
- echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
-ifneq ($(TARGET_DEVICE_TABLE),)
- # Use fakeroot to pretend to create all needed device nodes
- echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
- >> $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
-endif
- # Use fakeroot so tar believes the previous fakery
- echo "tar -c$(TAR_OPTS)f $(TAR_TARGET) -C $(TARGET_DIR) ." \
- >> $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
- chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
- $(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
-ifneq ($(TAR_COMPRESSOR),)
- -rm -f $(TAR_TARGET).$()
- PATH="$(STAGING_DIR)/sbin:$(STAGING_DIR)/bin:$(STAGING_DIR)/usr/sbin:$(STAGING_DIR)/usr/bin:$(PATH)" $(TAR_COMPRESSOR) $(TAR_TARGET) > $(TAR_TARGET).$(TAR_COMPRESSOR_EXT)
-endif
- - at rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_TARGET_ROOTFS_TAR),y)
-TARGETS+=tarroot
-endif
+$(eval $(call ROOTFS_TARGET,tar))
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 32/44] squashfs: convert to ROOTFS_TARGET infrastructure
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (30 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 31/44] tar: " Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 33/44] ext2: " Thomas Petazzoni
` (13 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/squashfs/squashfsroot.mk | 34 +++++-----------------------------
1 files changed, 5 insertions(+), 29 deletions(-)
diff --git a/target/squashfs/squashfsroot.mk b/target/squashfs/squashfsroot.mk
index 01c4dab..d72388e 100644
--- a/target/squashfs/squashfsroot.mk
+++ b/target/squashfs/squashfsroot.mk
@@ -4,34 +4,10 @@
#
#############################################################
-SQUASHFS_TARGET:=$(IMAGE).squashfs
+ROOTFS_SQUASHFS_DEPENDENCIES = host-squashfs
-squashfsroot: host-fakeroot host-squashfs makedevs
- # Use fakeroot to pretend all target binaries are owned by root
- rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
- touch $(BUILD_DIR)/.fakeroot.00000
- cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
- echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
-ifneq ($(TARGET_DEVICE_TABLE),)
- # Use fakeroot to pretend to create all needed device nodes
- echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
- >> $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
-endif
- # Use fakeroot so mksquashfs believes the previous fakery
- echo "$(HOST_DIR)/usr/bin/mksquashfs " \
- "$(TARGET_DIR) $(SQUASHFS_TARGET) " \
- "-noappend $(SQUASHFS_ENDIANNESS)" \
- >> $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
- chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
- $(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
- chmod 0644 $(SQUASHFS_TARGET)
- - at rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
+define ROOTFS_SQUASHFS_CMD
+ $(HOST_DIR)/usr/bin/mksquashfs $(TARGET_DIR) $$@ -noappend
+endef
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_TARGET_ROOTFS_SQUASHFS),y)
-TARGETS+=squashfsroot
-endif
+$(eval $(call ROOTFS_TARGET,squashfs))
\ No newline at end of file
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 33/44] ext2: convert to ROOTFS_TARGET infrastructure
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (31 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 32/44] squashfs: " Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 34/44] jffs2: " Thomas Petazzoni
` (12 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
We also remove the BR2_TARGET_ROOTFS_EXT2_OUTPUT option, that could be
used to specify an alternate name for the generated image file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/ext2/Config.in | 5 ---
target/ext2/ext2root.mk | 76 +++++++----------------------------------------
2 files changed, 11 insertions(+), 70 deletions(-)
diff --git a/target/ext2/Config.in b/target/ext2/Config.in
index 0047309..02ec18f 100644
--- a/target/ext2/Config.in
+++ b/target/ext2/Config.in
@@ -24,11 +24,6 @@ config BR2_TARGET_ROOTFS_EXT2_SQUASH
depends on BR2_TARGET_ROOTFS_EXT2
default y
-config BR2_TARGET_ROOTFS_EXT2_OUTPUT
- string "Output File"
- depends on BR2_TARGET_ROOTFS_EXT2
- default "$(IMAGE).ext2"
-
choice
prompt "Compression method"
default BR2_TARGET_ROOTFS_EXT2_NONE
diff --git a/target/ext2/ext2root.mk b/target/ext2/ext2root.mk
index 145b182..68b3b81 100644
--- a/target/ext2/ext2root.mk
+++ b/target/ext2/ext2root.mk
@@ -22,73 +22,19 @@ ifneq ($(strip $(BR2_TARGET_ROOTFS_EXT2_RESBLKS)),)
EXT2_OPTS += -m $(BR2_TARGET_ROOTFS_EXT2_RESBLKS)
endif
-EXT2_BASE := $(call qstrip,$(BR2_TARGET_ROOTFS_EXT2_OUTPUT))
+ROOTFS_EXT2_DEPENDENCIES = host-genext2fs
-EXT2_ROOTFS_COMPRESSOR:=
-EXT2_ROOTFS_COMPRESSOR_EXT:=
-EXT2_ROOTFS_COMPRESSOR_PREREQ:=
-ifeq ($(BR2_TARGET_ROOTFS_EXT2_GZIP),y)
-EXT2_ROOTFS_COMPRESSOR:=gzip -9 -c
-EXT2_ROOTFS_COMPRESSOR_EXT:=gz
-endif
-ifeq ($(BR2_TARGET_ROOTFS_EXT2_BZIP2),y)
-EXT2_ROOTFS_COMPRESSOR:=bzip2 -9 -c
-EXT2_ROOTFS_COMPRESSOR_EXT:=bz2
-endif
-ifeq ($(BR2_TARGET_ROOTFS_EXT2_LZMA),y)
-EXT2_ROOTFS_COMPRESSOR:=$(LZMA) -9 -c
-EXT2_ROOTFS_COMPRESSOR_EXT:=lzma
-EXT2_ROOTFS_COMPRESSOR_PREREQ:=host-lzma
-endif
-
-ifneq ($(EXT2_ROOTFS_COMPRESSOR),)
-EXT2_TARGET := $(EXT2_BASE).$(EXT2_ROOTFS_COMPRESSOR_EXT)
-else
-EXT2_TARGET := $(EXT2_BASE)
-endif
-
-$(EXT2_BASE): host-fakeroot host-genext2fs makedevs
- # Use fakeroot to pretend all target binaries are owned by root
- rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
- touch $(BUILD_DIR)/.fakeroot.00000
- cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
- echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
-ifneq ($(TARGET_DEVICE_TABLE),)
- # Use fakeroot to pretend to create all needed device nodes
- echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
- >> $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
-endif
- # Use fakeroot so genext2fs believes the previous fakery
ifeq ($(strip $(BR2_TARGET_ROOTFS_EXT2_BLOCKS)),0)
- GENEXT2_REALSIZE=`LC_ALL=C du -s -c -k $(TARGET_DIR) | grep total | sed -e "s/total//"`; \
- GENEXT2_ADDTOROOTSIZE=`if [ $$GENEXT2_REALSIZE -ge 20000 ]; then echo 16384; else echo 2400; fi`; \
- GENEXT2_SIZE=`expr $$GENEXT2_REALSIZE + $$GENEXT2_ADDTOROOTSIZE`; \
- GENEXT2_ADDTOINODESIZE=`find $(TARGET_DIR) | wc -l`; \
- GENEXT2_INODES=`expr $$GENEXT2_ADDTOINODESIZE + 400`; \
- set -x; \
- echo "$(HOST_DIR)/usr/bin/genext2fs -b $$GENEXT2_SIZE " \
- "-N $$GENEXT2_INODES -d $(TARGET_DIR) " \
- "$(EXT2_OPTS) $(EXT2_BASE)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
-else
- echo "$(HOST_DIR)/usr/bin/genext2fs -d $(TARGET_DIR) " \
- "$(EXT2_OPTS) $(EXT2_BASE)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
+GENEXT2_REALSIZE=$(shell LC_ALL=C du -s -c -k $(TARGET_DIR) | grep total | sed -e "s/total//")
+GENEXT2_ADDTOROOTSIZE=$(shell if [ $(GENEXT2_REALSIZE) -ge 20000 ]; then echo 16384; else echo 2400; fi)
+GENEXT2_SIZE=$(shell expr $(GENEXT2_REALSIZE) + $(GENEXT2_ADDTOROOTSIZE))
+GENEXT2_ADDTOINODESIZE=$(shell find $(TARGET_DIR) | wc -l)
+GENEXT2_INODES=$(shell expr $(GENEXT2_ADDTOINODESIZE) + 400)
+EXT2_OPTS += -b $(GENEXT2_SIZE) -N $(GENEXT2_INODES)
endif
- chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
- $(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
- - at rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
-ifneq ($(EXT2_ROOTFS_COMPRESSOR),)
-$(EXT2_BASE).$(EXT2_ROOTFS_COMPRESSOR_EXT): $(EXT2_ROOTFS_COMPRESSOR_PREREQ) $(EXT2_BASE)
- $(EXT2_ROOTFS_COMPRESSOR) $(EXT2_BASE) > $(EXT2_TARGET)
-endif
-
-ext2root: $(EXT2_TARGET)
+define ROOTFS_EXT2_CMD
+ $(HOST_DIR)/usr/bin/genext2fs -d $(TARGET_DIR) $(EXT2_OPTS) $$@
+endef
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_TARGET_ROOTFS_EXT2),y)
-TARGETS+=ext2root
-endif
+$(eval $(call ROOTFS_TARGET,ext2))
\ No newline at end of file
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 34/44] jffs2: convert to ROOTFS_TARGET infrastructure
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (32 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 33/44] ext2: " Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 35/44] ubifs: " Thomas Petazzoni
` (11 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
We also remove the BR2_TARGET_ROOTFS_JFFS2_OUTPUT option, that could
be used to specify an alternate name for the generated image file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/jffs2/Config.in | 4 ---
target/jffs2/jffs2root.mk | 57 ++++++++++++--------------------------------
2 files changed, 16 insertions(+), 45 deletions(-)
diff --git a/target/jffs2/Config.in b/target/jffs2/Config.in
index a216a27..b787ec9 100644
--- a/target/jffs2/Config.in
+++ b/target/jffs2/Config.in
@@ -114,8 +114,4 @@ config BR2_TARGET_ROOTFS_JFFS2_SUMMARY
A summarised image can be mounted faster if support is
enabled in the kernel (CONFIG_JFFS2_SUMMARY)
-config BR2_TARGET_ROOTFS_JFFS2_OUTPUT
- string "Output File"
- default "$(IMAGE).jffs2"
-
endif
diff --git a/target/jffs2/jffs2root.mk b/target/jffs2/jffs2root.mk
index eea0e3a..a0a563d 100644
--- a/target/jffs2/jffs2root.mk
+++ b/target/jffs2/jffs2root.mk
@@ -32,55 +32,30 @@ JFFS2_OPTS += -n
SUMTOOL_OPTS += -n
endif
-JFFS2_TARGET := $(call qstrip,$(BR2_TARGET_ROOTFS_JFFS2_OUTPUT))
ifneq ($(TARGET_DEVICE_TABLE),)
JFFS2_OPTS += -D $(TARGET_DEVICE_TABLE)
endif
+ROOTFS_JFFS2_DEPENDENCIES = host-mtd
-#
-# mtd-host is a dependency which builds a local copy of mkfs.jffs2 if it is needed.
-# the actual build is done from package/mtd/mtd.mk and it sets the
-# value of MKFS_JFFS2 to either the previously installed copy or the one
-# just built.
-#
-$(JFFS2_TARGET): host-fakeroot host-mtd makedevs
- # Use fakeroot to pretend all target binaries are owned by root
- rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
- touch $(BUILD_DIR)/.fakeroot.00000
- cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
- echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
-ifneq ($(TARGET_DEVICE_TABLE),)
- # Use fakeroot to pretend to create all needed device nodes
- echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
- >> $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
-endif
- # Use fakeroot so mkfs.jffs2 believes the previous fakery
ifneq ($(BR2_TARGET_ROOTFS_JFFS2_SUMMARY),)
- echo "$(MKFS_JFFS2) $(JFFS2_OPTS) -d $(TARGET_DIR) -o $(JFFS2_TARGET).nosummary && " \
- "$(SUMTOOL) $(SUMTOOL_OPTS) -i $(JFFS2_TARGET).nosummary -o $(JFFS2_TARGET) && " \
- "rm $(JFFS2_TARGET).nosummary" \
- >> $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
+define ROOTFS_JFFS2_CMD
+ $(MKFS_JFFS2) $(JFFS2_OPTS) -d $(TARGET_DIR) -o $$@.nosummary && \
+ $(SUMTOOL) $(SUMTOOL_OPTS) -i $$@.nosummary -o $$@ && \
+ rm $$@.nosummary
+endef
else
- echo "$(MKFS_JFFS2) $(JFFS2_OPTS) -d $(TARGET_DIR) -o $(JFFS2_TARGET)" \
- >> $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
-endif
- chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
- $(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
- - at rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
- @ls -l $(JFFS2_TARGET)
-ifeq ($(BR2_JFFS2_TARGET_SREC),y)
- $(TARGET_CROSS)objcopy -I binary -O srec --adjust-vma 0xa1000000 $(JFFS2_TARGET) $(JFFS2_TARGET).srec
- @ls -l $(JFFS2_TARGET).srec
+define ROOTFS_JFFS2_CMD
+ $(MKFS_JFFS2) $(JFFS2_OPTS) -d $(TARGET_DIR) -o $$@
+endef
endif
-jffs2root: $(JFFS2_TARGET)
+define JFFS2_GEN_SREC
+ $(TARGET_CROSS)objcopy -I binary -O srec --adjust-vma 0xa1000000 $$@ $$@.srec
+endef
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_TARGET_ROOTFS_JFFS2),y)
-TARGETS+=jffs2root
+ifeq ($(BR2_JFFS2_TARGET_SREC),y)
+ROOTFS_JFFS2_POST_GEN_HOOKS += JFFS2_GEN_SREC
endif
+
+$(eval $(call ROOTFS_TARGET,jffs2))
\ No newline at end of file
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 35/44] ubifs: convert to ROOTFS_TARGET infrastructure
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (33 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 34/44] jffs2: " Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 36/44] initramfs: " Thomas Petazzoni
` (10 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
We also remove the BR2_TARGET_ROOTFS_UBIFS_OUTPUT option, that could
be used to specify an alternate name for the generated image file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/ubifs/Config.in | 5 ---
target/ubifs/ubifsroot.mk | 63 +++-----------------------------------------
2 files changed, 5 insertions(+), 63 deletions(-)
diff --git a/target/ubifs/Config.in b/target/ubifs/Config.in
index 3222fea..9fa510e 100644
--- a/target/ubifs/Config.in
+++ b/target/ubifs/Config.in
@@ -22,11 +22,6 @@ config BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT
help
Some comment required here
-config BR2_TARGET_ROOTFS_UBIFS_OUTPUT
- string "Output File"
- depends on BR2_TARGET_ROOTFS_UBIFS
- default "$(IMAGE).ubifs"
-
choice
prompt "ubifs runtime compression"
default BR2_TARGET_ROOTFS_UBIFS_RT_LZO
diff --git a/target/ubifs/ubifsroot.mk b/target/ubifs/ubifsroot.mk
index d0f3885..0fad234 100644
--- a/target/ubifs/ubifsroot.mk
+++ b/target/ubifs/ubifsroot.mk
@@ -6,8 +6,6 @@
UBIFS_OPTS := -e $(BR2_TARGET_ROOTFS_UBIFS_LEBSIZE) -c $(BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT) -m $(BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE)
-UBIFS_BASE := $(call qstrip,$(BR2_TARGET_ROOTFS_UBIFS_OUTPUT))
-
ifeq ($(BR2_TARGET_ROOTFS_UBIFS_RT_ZLIB),y)
UBIFS_OPTS += -x zlib
endif
@@ -18,61 +16,10 @@ ifeq ($(BR2_TARGET_ROOTFS_UBIFS_RT_NONE),y)
UBIFS_OPTS += -x none
endif
-UBIFS_ROOTFS_COMPRESSOR:=
-UBIFS_ROOTFS_COMPRESSOR_EXT:=
-UBIFS_ROOTFS_COMPRESSOR_PREREQ:=
-ifeq ($(BR2_TARGET_ROOTFS_UBIFS_GZIP),y)
-UBIFS_ROOTFS_COMPRESSOR:=gzip -9 -c
-UBIFS_ROOTFS_COMPRESSOR_EXT:=gz
-endif
-ifeq ($(BR2_TARGET_ROOTFS_UBIFS_BZIP2),y)
-UBIFS_ROOTFS_COMPRESSOR:=bzip2 -9 -c
-UBIFS_ROOTFS_COMPRESSOR_EXT:=bz2
-endif
-ifeq ($(BR2_TARGET_ROOTFS_UBIFS_LZMA),y)
-UBIFS_ROOTFS_COMPRESSOR:=$(LZMA) -9 -c
-UBIFS_ROOTFS_COMPRESSOR_EXT:=lzma
-UBIFS_ROOTFS_COMPRESSOR_PREREQ:= host-lzma
-endif
-
-ifneq ($(UBIFS_ROOTFS_COMPRESSOR),)
-UBIFS_TARGET := $(UBIFS_BASE).$(UBIFS_ROOTFS_COMPRESSOR_EXT)
-else
-UBIFS_TARGET := $(UBIFS_BASE)
-endif
-
-$(UBIFS_BASE): host-fakeroot host-mtd makedevs
- # Use fakeroot to pretend all target binaries are owned by root
- rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
- touch $(BUILD_DIR)/.fakeroot.00000
- cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
- echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
-ifneq ($(TARGET_DEVICE_TABLE),)
- # Use fakeroot to pretend to create all needed device nodes
- echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
- >> $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
-endif
- # Use fakeroot so mkfs.ubifs believes the previous fakery
- echo "$(HOST_DIR)/usr/sbin/mkfs.ubifs -d $(TARGET_DIR) " \
- "$(UBIFS_OPTS) -o $(UBIFS_BASE)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
- chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
- $(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
- - at rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
-
-ifneq ($(UBIFS_ROOTFS_COMPRESSOR),)
-$(UBIFS_BASE).$(UBIFS_ROOTFS_COMPRESSOR_EXT): $(UBIFS_ROOTFS_COMPRESSOR_PREREQ) $(UBIFS_BASE)
- $(UBIFS_ROOTFS_COMPRESSOR) $(UBIFS_BASE) > $(UBIFS_TARGET)
-endif
-
-ubifsroot: $(UBIFS_TARGET)
- @ls -l $(UBIFS_TARGET)
+ROOTFS_UBIFS_DEPENDENCIES = host-mtd
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_TARGET_ROOTFS_UBIFS),y)
-TARGETS+=ubifsroot
-endif
+define ROOTFS_UBIFS_CMD
+ $(HOST_DIR)/usr/sbin/mkfs.ubifs -d $(TARGET_DIR) $(UBIFS_OPTS) -o $$@
+endef
+$(eval $(call ROOTFS_TARGET,ubifs))
\ No newline at end of file
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 36/44] initramfs: convert to ROOTFS_TARGET infrastructure
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (34 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 35/44] ubifs: " Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 37/44] busybox initramfs: do not use the IMAGE variable Thomas Petazzoni
` (9 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/initramfs/initramfs.mk | 37 ++++++-------------------------------
1 files changed, 6 insertions(+), 31 deletions(-)
diff --git a/target/initramfs/initramfs.mk b/target/initramfs/initramfs.mk
index 0030278..cf1fcdb 100644
--- a/target/initramfs/initramfs.mk
+++ b/target/initramfs/initramfs.mk
@@ -6,38 +6,13 @@
#
#############################################################
-ifeq ($(BR2_TARGET_ROOTFS_INITRAMFS),y)
-INITRAMFS_TARGET:=$(IMAGE).initramfs_list
-else
-INITRAMFS_TARGET:= #nothing
-endif
-
-TARGETS+=$(INITRAMFS_TARGET)
-
-$(INITRAMFS_TARGET) initramfs: host-fakeroot makedevs
+define ROOTFS_INITRAMFS_INIT_SYMLINK
rm -f $(TARGET_DIR)/init
ln -s sbin/init $(TARGET_DIR)/init
- # Use fakeroot to pretend all target binaries are owned by root
- rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
- touch $(BUILD_DIR)/.fakeroot.00000
- cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
- echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
- # Use fakeroot to pretend to create all needed device nodes
- echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
- >> $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
- # Use fakeroot so gen_initramfs_list.sh believes the previous fakery
- echo "$(SHELL) target/initramfs/gen_initramfs_list.sh -u 0 -g 0 $(TARGET_DIR) > $(INITRAMFS_TARGET)" \
- >> $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
- chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
- $(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
- -rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
-
-initramfs-source:
-
-initramfs-clean:
-ifeq ($(BR2_TARGET_ROOTFS_INITRAMFS),y)
- -rm -f $(INITRAMFS_TARGET)
-endif
-initramfs-dirclean:
+endef
+define ROOTFS_INITRAMFS_CMD
+ $(SHELL) target/initramfs/gen_initramfs_list.sh -u 0 -g 0 $(TARGET_DIR) > $$@
+endef
+$(eval $(call ROOTFS_TARGET,initramfs))
\ No newline at end of file
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 37/44] busybox initramfs: do not use the IMAGE variable
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (35 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 36/44] initramfs: " Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 38/44] target/common: do not use IMAGE Thomas Petazzoni
` (8 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/busybox/initramfs.mk | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/package/busybox/initramfs.mk b/package/busybox/initramfs.mk
index afb80f9..394f483 100644
--- a/package/busybox/initramfs.mk
+++ b/package/busybox/initramfs.mk
@@ -7,7 +7,7 @@ ifeq ($(BR2_PACKAGE_BUSYBOX_INITRAMFS),y)
BUSYBOX_INITRAMFS_DIR:=$(BUSYBOX_DIR)-initramfs
BR2_INITRAMFS_DIR:=$(BUILD_DIR)/initramfs
-BB_INITRAMFS_TARGET:=$(IMAGE).initramfs_lst
+BB_INITRAMFS_TARGET:=rootfs.initramfs_lst
$(BUSYBOX_INITRAMFS_DIR)/.unpacked: $(DL_DIR)/$(BUSYBOX_SOURCE)
rm -rf $(BUILD_DIR)/tmp $(BUSYBOX_INITRAMFS_DIR)
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 38/44] target/common: do not use IMAGE
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (36 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 37/44] busybox initramfs: do not use the IMAGE variable Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 39/44] iso9660: rework in a similar way to ROOTFS_TARGET Thomas Petazzoni
` (7 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/common.mk | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/target/common.mk b/target/common.mk
index c7eff74..cebe8c3 100644
--- a/target/common.mk
+++ b/target/common.mk
@@ -31,8 +31,8 @@ FAKEROOT_SCRIPT = $(BUILD_DIR)/_fakeroot.fs
define ROOTFS_TARGET_INTERNAL
-$(IMAGE).$(1): $(ROOTFS_$(2)_DEPENDENCIES) host-fakeroot makedevs $(if $(BR2_TARGET_ROOTFS_$(2)_LZMA),host-lzma)
- @$(call MESSAGE,"Generating root filesystem image $(IMAGE).$(1)")
+$(BINARIES_DIR)/rootfs.$(1): $(ROOTFS_$(2)_DEPENDENCIES) host-fakeroot makedevs $(if $(BR2_TARGET_ROOTFS_$(2)_LZMA),host-lzma)
+ @$(call MESSAGE,"Generating root filesystem image rootfs.$(1)")
$(foreach hook,$(ROOTFS_$(2)_PRE_GEN_HOOKS),$(call $(hook))$(sep))
rm -f $(FAKEROOT_SCRIPT)
touch $(BUILD_DIR)/.fakeroot.00000
@@ -56,7 +56,7 @@ ifeq ($$(BR2_TARGET_ROOTFS_$(2)_LZMA),y)
$(LZMA) -9 -c $$@ > $$@.lzma
endif
-$(1)-root: $(IMAGE).$(1)
+$(1)-root: $(BINARIES_DIR)/rootfs.$(1)
ifeq ($$(BR2_TARGET_ROOTFS_$(2)),y)
TARGETS += $(1)-root
@@ -65,4 +65,4 @@ endef
define ROOTFS_TARGET
$(call ROOTFS_TARGET_INTERNAL,$(1),$(call UPPERCASE,$(1)))
-endef
\ No newline at end of file
+endef
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 39/44] iso9660: rework in a similar way to ROOTFS_TARGET
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (37 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 38/44] target/common: do not use IMAGE Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 40/44] Remove IMAGE and related configuration options Thomas Petazzoni
` (6 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
Unfortunately, it cannot use the ROOTFS_TARGET infrastructure, due to
the specifities of the iso9660 build process.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/iso9660/Config.in | 5 -----
target/iso9660/iso9660.mk | 30 ++++++++++++++++--------------
2 files changed, 16 insertions(+), 19 deletions(-)
diff --git a/target/iso9660/Config.in b/target/iso9660/Config.in
index 40c93b3..ceee52f 100644
--- a/target/iso9660/Config.in
+++ b/target/iso9660/Config.in
@@ -7,11 +7,6 @@ config BR2_TARGET_ROOTFS_ISO9660
help
Build a bootable iso9660 image
-config BR2_TARGET_ROOTFS_ISO9660_OUTPUT
- string "Output File"
- depends on BR2_TARGET_ROOTFS_ISO9660
- default "$(IMAGE).iso"
-
config BR2_TARGET_ROOTFS_ISO9660_BOOT_MENU
string "Boot menu.lst file"
depends on BR2_TARGET_ROOTFS_ISO9660
diff --git a/target/iso9660/iso9660.mk b/target/iso9660/iso9660.mk
index a198c17..66e2de2 100644
--- a/target/iso9660/iso9660.mk
+++ b/target/iso9660/iso9660.mk
@@ -2,10 +2,12 @@
#
# Build the iso96600 root filesystem image
#
+# Cannot be converted to the ROOTFS_TARGET infrastructure, because of
+# the temporary construction in ISO9660_TARGET_DIR.
+#
#############################################################
ISO9660_TARGET_DIR=$(BUILD_DIR)/iso9660
-ISO9660_TARGET:=$(call qstrip,$(BR2_TARGET_ROOTFS_ISO9660_OUTPUT))
ISO9660_BOOT_MENU:=$(call qstrip,$(BR2_TARGET_ROOTFS_ISO9660_BOOT_MENU))
ISO9660_OPTS:=
@@ -13,7 +15,8 @@ ifeq ($(BR2_TARGET_ROOTFS_ISO9660_SQUASH),y)
ISO9660_OPTS+=-U
endif
-$(ISO9660_TARGET): host-fakeroot host-cdrkit $(LINUX_KERNEL) $(EXT2_TARGET) grub
+$(BINARIES_DIR)/rootfs.iso9660: host-cdrkit host-fakeroot $(LINUX_KERNEL) $(BINARIES_DIR)/rootfs.ext2 grub
+ @$(call MESSAGE,"Generating root filesystem image rootfs.iso9660")
mkdir -p $(ISO9660_TARGET_DIR)
mkdir -p $(ISO9660_TARGET_DIR)/boot/grub
cp $(GRUB_DIR)/stage2/stage2_eltorito $(ISO9660_TARGET_DIR)/boot/grub/
@@ -21,21 +24,20 @@ $(ISO9660_TARGET): host-fakeroot host-cdrkit $(LINUX_KERNEL) $(EXT2_TARGET) grub
cp $(LINUX_KERNEL) $(ISO9660_TARGET_DIR)/kernel
cp $(EXT2_TARGET) $(ISO9660_TARGET_DIR)/initrd
# Use fakeroot to pretend all target binaries are owned by root
- rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
+ rm -f $(FAKEROOT_SCRIPT)
touch $(BUILD_DIR)/.fakeroot.00000
- cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
- echo "chown -R 0:0 $(ISO9660_TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
+ cat $(BUILD_DIR)/.fakeroot* > $(FAKEROOT_SCRIPT)
+ echo "chown -R 0:0 $(ISO9660_TARGET_DIR)" >> $(FAKEROOT_SCRIPT)
# Use fakeroot so mkisofs believes the previous fakery
echo "$(HOST_DIR)/usr/bin/genisoimage -R -b boot/grub/stage2_eltorito -no-emul-boot " \
- "-boot-load-size 4 -boot-info-table -o $(ISO9660_TARGET) $(ISO9660_TARGET_DIR)" \
- >> $(BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
- chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
- $(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
- - at rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
+ "-boot-load-size 4 -boot-info-table -o $@ $(ISO9660_TARGET_DIR)" \
+ >> $(FAKEROOT_SCRIPT)
+ chmod a+x $(FAKEROOT_SCRIPT)
+ $(HOST_DIR)/usr/bin/fakeroot -- $(FAKEROOT_SCRIPT)
+ - at rm -f $(FAKEROOT_SCRIPT)
+ - at rm -rf $(ISO9660_TARGET_DIR)
-iso9660root: $(ISO9660_TARGET)
- echo $(ISO9660_TARGET)
- @ls -l $(ISO9660_TARGET)
+iso9660-root: $(BINARIES_DIR)/rootfs.iso9660
#############################################################
#
@@ -43,5 +45,5 @@ iso9660root: $(ISO9660_TARGET)
#
#############################################################
ifeq ($(BR2_TARGET_ROOTFS_ISO9660),y)
-TARGETS+=iso9660root
+TARGETS+=iso9660-root
endif
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 40/44] Remove IMAGE and related configuration options
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (38 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 39/44] iso9660: rework in a similar way to ROOTFS_TARGET Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 41/44] Move all filesystem generation code to fs/ Thomas Petazzoni
` (5 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
Now, we just hardcode the image filenames to be rootfs.$(FSTYPE), in
the $(BINARIES_DIR).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/Makefile.in | 4 ----
target/Config.in | 12 ------------
2 files changed, 0 insertions(+), 16 deletions(-)
diff --git a/package/Makefile.in b/package/Makefile.in
index 2bd3640..efb4dec 100644
--- a/package/Makefile.in
+++ b/package/Makefile.in
@@ -109,7 +109,6 @@ TOOLCHAIN_DIR=$(BASE_DIR)/toolchain
# Quotes are needed for spaces et al in path components.
TARGET_PATH="$(TOOLCHAIN_DIR)/bin:$(HOST_DIR)/bin:$(HOST_DIR)/usr/bin:$(HOST_DIR)/usr/sbin/:$(STAGING_DIR)/bin:$(STAGING_DIR)/usr/bin:$(PATH)"
-IMAGE:=$(BINARIES_DIR)/$(BR2_ROOTFS_PREFIX).$(ARCH)$(ROOTFS_SUFFIX)
GNU_TARGET_NAME=$(OPTIMIZE_FOR_CPU)-linux
REAL_GNU_TARGET_NAME=$(OPTIMIZE_FOR_CPU)$(GNU_TARGET_SUFFIX)
TARGET_CROSS=$(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-
@@ -119,9 +118,6 @@ TOOLCHAIN_EXTERNAL_PREFIX:=$(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PREFIX))
TOOLCHAIN_EXTERNAL_PATH:=$(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PATH))
TOOLCHAIN_DIR=$(BASE_DIR)/toolchain
TARGET_PATH="$(HOST_DIR)/bin:$(HOST_DIR)/usr/bin:$(HOST_DIR)/usr/sbin/:$(TOOLCHAIN_DIR)/bin:$(TOOLCHAIN_EXTERNAL_PATH)/bin:$(PATH)"
-#IMAGE:=$(BINARIES_DIR)/$(BR2_ROOTFS_PREFIX).$(TOOLCHAIN_EXTERNAL_PREFIX)$(ROOTFS_SUFFIX)
-IMAGE:=$(BINARIES_DIR)/$(BR2_ROOTFS_PREFIX).$(ARCH)$(ROOTFS_SUFFIX)
-
REAL_GNU_TARGET_NAME=$(TOOLCHAIN_EXTERNAL_PREFIX)
GNU_TARGET_NAME=$(TOOLCHAIN_EXTERNAL_PREFIX)
KERNEL_CROSS=$(TOOLCHAIN_EXTERNAL_PATH)/bin/$(TOOLCHAIN_EXTERNAL_PREFIX)-
diff --git a/target/Config.in b/target/Config.in
index 4cae66c..5d634ca 100644
--- a/target/Config.in
+++ b/target/Config.in
@@ -1,17 +1,5 @@
menu "Target filesystem options"
-config BR2_ROOTFS_PREFIX
- string "Custom root fs prefix"
- default "rootfs"
- help
- Add a custom string to the beginning of the root file system name.
-
-config BR2_ROOTFS_SUFFIX
- string "Custom root fs suffix"
- default ""
- help
- Add a custom string to the end of the root file system name.
-
config BR2_ROOTFS_POST_BUILD_SCRIPT
string "Custom script to run before packing files"
default ""
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 41/44] Move all filesystem generation code to fs/
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (39 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 40/44] Remove IMAGE and related configuration options Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 42/44] Coherent naming for .mk files in fs/ Thomas Petazzoni
` (4 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Config.in | 2 +
Makefile | 2 +
fs/Config.in | 30 +++++++++++++++++++++
{target => fs}/cloop/Config.in | 0
{target => fs}/cloop/cloop.mk | 0
{target => fs}/common.mk | 2 +
{target => fs}/cpio/Config.in | 0
{target => fs}/cpio/cpioroot.mk | 0
{target => fs}/cramfs/Config.in | 0
{target => fs}/cramfs/cramfs.mk | 0
{target => fs}/ext2/Config.in | 0
{target => fs}/ext2/ext2root.mk | 0
{target => fs}/initramfs/Config.in | 0
{target => fs}/initramfs/gen_initramfs_list.sh | 0
{target => fs}/initramfs/initramfs.mk | 0
{target => fs}/iso9660/Config.in | 0
{target => fs}/iso9660/iso9660.mk | 0
| 0
{target => fs}/jffs2/Config.in | 0
{target => fs}/jffs2/jffs2root.mk | 0
{target => fs}/romfs/Config.in | 0
{target => fs}/romfs/romfs.mk | 0
{target => fs}/squashfs/Config.in | 0
{target => fs}/squashfs/squashfsroot.mk | 0
{target => fs}/tar/Config.in | 0
{target => fs}/tar/tarroot.mk | 0
{target => fs}/ubifs/Config.in | 0
{target => fs}/ubifs/ubifsroot.mk | 0
target/Config.in | 33 +-----------------------
target/Makefile.in | 2 -
30 files changed, 37 insertions(+), 34 deletions(-)
create mode 100644 fs/Config.in
rename {target => fs}/cloop/Config.in (100%)
rename {target => fs}/cloop/cloop.mk (100%)
rename {target => fs}/common.mk (99%)
rename {target => fs}/cpio/Config.in (100%)
rename {target => fs}/cpio/cpioroot.mk (100%)
rename {target => fs}/cramfs/Config.in (100%)
rename {target => fs}/cramfs/cramfs.mk (100%)
rename {target => fs}/ext2/Config.in (100%)
rename {target => fs}/ext2/ext2root.mk (100%)
rename {target => fs}/initramfs/Config.in (100%)
rename {target => fs}/initramfs/gen_initramfs_list.sh (100%)
rename {target => fs}/initramfs/initramfs.mk (100%)
rename {target => fs}/iso9660/Config.in (100%)
rename {target => fs}/iso9660/iso9660.mk (100%)
rename {target => fs}/iso9660/menu.lst (100%)
rename {target => fs}/jffs2/Config.in (100%)
rename {target => fs}/jffs2/jffs2root.mk (100%)
rename {target => fs}/romfs/Config.in (100%)
rename {target => fs}/romfs/romfs.mk (100%)
rename {target => fs}/squashfs/Config.in (100%)
rename {target => fs}/squashfs/squashfsroot.mk (100%)
rename {target => fs}/tar/Config.in (100%)
rename {target => fs}/tar/tarroot.mk (100%)
rename {target => fs}/ubifs/Config.in (100%)
rename {target => fs}/ubifs/ubifsroot.mk (100%)
diff --git a/Config.in b/Config.in
index 4f567d0..224a44a 100644
--- a/Config.in
+++ b/Config.in
@@ -346,4 +346,6 @@ source "toolchain/Config.in"
source "package/Config.in"
+source "fs/Config.in"
+
source "target/Config.in"
diff --git a/Makefile b/Makefile
index b47c0b0..ce6bf3d 100644
--- a/Makefile
+++ b/Makefile
@@ -323,6 +323,8 @@ ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
TARGETS+=target-purgelocales
endif
+include fs/common.mk
+
# target stuff is last so it can override anything else
include target/Makefile.in
diff --git a/fs/Config.in b/fs/Config.in
new file mode 100644
index 0000000..f885c52
--- /dev/null
+++ b/fs/Config.in
@@ -0,0 +1,30 @@
+menu "Target filesystem options"
+
+config BR2_ROOTFS_POST_BUILD_SCRIPT
+ string "Custom script to run before packing files"
+ default ""
+ help
+ Specify a script to be run after the build has finished and before
+ the BR2 starts packing the files into selected packages.
+
+ This gives users the oportunity to do board-specific cleanups,
+ add-ons and the like, so the generated files can be used directly
+ without further processing.
+
+ The script is called with the target directory name as first and
+ only argument. Make sure the exit code of that script is 0,
+ otherwise make will stop after calling it.
+
+source "fs/cramfs/Config.in"
+source "fs/cloop/Config.in"
+source "fs/ext2/Config.in"
+source "fs/jffs2/Config.in"
+source "fs/ubifs/Config.in"
+source "fs/squashfs/Config.in"
+source "fs/tar/Config.in"
+source "fs/cpio/Config.in"
+source "fs/iso9660/Config.in"
+source "fs/initramfs/Config.in"
+source "fs/romfs/Config.in"
+
+endmenu
diff --git a/target/cloop/Config.in b/fs/cloop/Config.in
similarity index 100%
rename from target/cloop/Config.in
rename to fs/cloop/Config.in
diff --git a/target/cloop/cloop.mk b/fs/cloop/cloop.mk
similarity index 100%
rename from target/cloop/cloop.mk
rename to fs/cloop/cloop.mk
diff --git a/target/common.mk b/fs/common.mk
similarity index 99%
rename from target/common.mk
rename to fs/common.mk
index cebe8c3..fa6afd9 100644
--- a/target/common.mk
+++ b/fs/common.mk
@@ -66,3 +66,5 @@ endef
define ROOTFS_TARGET
$(call ROOTFS_TARGET_INTERNAL,$(1),$(call UPPERCASE,$(1)))
endef
+
+include fs/*/*.mk
diff --git a/target/cpio/Config.in b/fs/cpio/Config.in
similarity index 100%
rename from target/cpio/Config.in
rename to fs/cpio/Config.in
diff --git a/target/cpio/cpioroot.mk b/fs/cpio/cpioroot.mk
similarity index 100%
rename from target/cpio/cpioroot.mk
rename to fs/cpio/cpioroot.mk
diff --git a/target/cramfs/Config.in b/fs/cramfs/Config.in
similarity index 100%
rename from target/cramfs/Config.in
rename to fs/cramfs/Config.in
diff --git a/target/cramfs/cramfs.mk b/fs/cramfs/cramfs.mk
similarity index 100%
rename from target/cramfs/cramfs.mk
rename to fs/cramfs/cramfs.mk
diff --git a/target/ext2/Config.in b/fs/ext2/Config.in
similarity index 100%
rename from target/ext2/Config.in
rename to fs/ext2/Config.in
diff --git a/target/ext2/ext2root.mk b/fs/ext2/ext2root.mk
similarity index 100%
rename from target/ext2/ext2root.mk
rename to fs/ext2/ext2root.mk
diff --git a/target/initramfs/Config.in b/fs/initramfs/Config.in
similarity index 100%
rename from target/initramfs/Config.in
rename to fs/initramfs/Config.in
diff --git a/target/initramfs/gen_initramfs_list.sh b/fs/initramfs/gen_initramfs_list.sh
similarity index 100%
rename from target/initramfs/gen_initramfs_list.sh
rename to fs/initramfs/gen_initramfs_list.sh
diff --git a/target/initramfs/initramfs.mk b/fs/initramfs/initramfs.mk
similarity index 100%
rename from target/initramfs/initramfs.mk
rename to fs/initramfs/initramfs.mk
diff --git a/target/iso9660/Config.in b/fs/iso9660/Config.in
similarity index 100%
rename from target/iso9660/Config.in
rename to fs/iso9660/Config.in
diff --git a/target/iso9660/iso9660.mk b/fs/iso9660/iso9660.mk
similarity index 100%
rename from target/iso9660/iso9660.mk
rename to fs/iso9660/iso9660.mk
diff --git a/target/iso9660/menu.lst b/fs/iso9660/menu.lst
similarity index 100%
rename from target/iso9660/menu.lst
rename to fs/iso9660/menu.lst
diff --git a/target/jffs2/Config.in b/fs/jffs2/Config.in
similarity index 100%
rename from target/jffs2/Config.in
rename to fs/jffs2/Config.in
diff --git a/target/jffs2/jffs2root.mk b/fs/jffs2/jffs2root.mk
similarity index 100%
rename from target/jffs2/jffs2root.mk
rename to fs/jffs2/jffs2root.mk
diff --git a/target/romfs/Config.in b/fs/romfs/Config.in
similarity index 100%
rename from target/romfs/Config.in
rename to fs/romfs/Config.in
diff --git a/target/romfs/romfs.mk b/fs/romfs/romfs.mk
similarity index 100%
rename from target/romfs/romfs.mk
rename to fs/romfs/romfs.mk
diff --git a/target/squashfs/Config.in b/fs/squashfs/Config.in
similarity index 100%
rename from target/squashfs/Config.in
rename to fs/squashfs/Config.in
diff --git a/target/squashfs/squashfsroot.mk b/fs/squashfs/squashfsroot.mk
similarity index 100%
rename from target/squashfs/squashfsroot.mk
rename to fs/squashfs/squashfsroot.mk
diff --git a/target/tar/Config.in b/fs/tar/Config.in
similarity index 100%
rename from target/tar/Config.in
rename to fs/tar/Config.in
diff --git a/target/tar/tarroot.mk b/fs/tar/tarroot.mk
similarity index 100%
rename from target/tar/tarroot.mk
rename to fs/tar/tarroot.mk
diff --git a/target/ubifs/Config.in b/fs/ubifs/Config.in
similarity index 100%
rename from target/ubifs/Config.in
rename to fs/ubifs/Config.in
diff --git a/target/ubifs/ubifsroot.mk b/fs/ubifs/ubifsroot.mk
similarity index 100%
rename from target/ubifs/ubifsroot.mk
rename to fs/ubifs/ubifsroot.mk
diff --git a/target/Config.in b/target/Config.in
index 5d634ca..5d53635 100644
--- a/target/Config.in
+++ b/target/Config.in
@@ -1,35 +1,4 @@
-menu "Target filesystem options"
-
-config BR2_ROOTFS_POST_BUILD_SCRIPT
- string "Custom script to run before packing files"
- default ""
- help
- Specify a script to be run after the build has finished and before
- the BR2 starts packing the files into selected packages.
-
- This gives users the oportunity to do board-specific cleanups,
- add-ons and the like, so the generated files can be used directly
- without further processing.
-
- The script is called with the target directory name as first and
- only argument. Make sure the exit code of that script is 0,
- otherwise make will stop after calling it.
-
-comment "filesystem for target device"
-
-source "target/cramfs/Config.in"
-source "target/cloop/Config.in"
-source "target/ext2/Config.in"
-source "target/jffs2/Config.in"
-source "target/ubifs/Config.in"
-source "target/squashfs/Config.in"
-source "target/tar/Config.in"
-source "target/cpio/Config.in"
-source "target/iso9660/Config.in"
-source "target/initramfs/Config.in"
-source "target/romfs/Config.in"
-
-comment "bootloader for target device"
+menu "Bootloaders"
source "target/x86/grub/Config.in"
#source "target/x86/grub2/Config.in"
diff --git a/target/Makefile.in b/target/Makefile.in
index 38993e5..48396d5 100644
--- a/target/Makefile.in
+++ b/target/Makefile.in
@@ -62,8 +62,6 @@ ifeq ($(BR2_TARGET_UBOOT),y)
include target/u-boot/Makefile.in
endif
-# and finally build the filesystems/tarballs
-include target/common.mk
include target/*/*.mk
# kernel rules
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 42/44] Coherent naming for .mk files in fs/
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (40 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 41/44] Move all filesystem generation code to fs/ Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 43/44] Update defconfigs after fs cleanup Thomas Petazzoni
` (3 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
fs/cpio/{cpioroot.mk => cpio.mk} | 0
fs/ext2/{ext2root.mk => ext2.mk} | 0
fs/jffs2/{jffs2root.mk => jffs2.mk} | 0
fs/squashfs/{squashfsroot.mk => squashfs.mk} | 0
fs/tar/{tarroot.mk => tar.mk} | 0
fs/ubifs/{ubifsroot.mk => ubifs.mk} | 0
6 files changed, 0 insertions(+), 0 deletions(-)
rename fs/cpio/{cpioroot.mk => cpio.mk} (100%)
rename fs/ext2/{ext2root.mk => ext2.mk} (100%)
rename fs/jffs2/{jffs2root.mk => jffs2.mk} (100%)
rename fs/squashfs/{squashfsroot.mk => squashfs.mk} (100%)
rename fs/tar/{tarroot.mk => tar.mk} (100%)
rename fs/ubifs/{ubifsroot.mk => ubifs.mk} (100%)
diff --git a/fs/cpio/cpioroot.mk b/fs/cpio/cpio.mk
similarity index 100%
rename from fs/cpio/cpioroot.mk
rename to fs/cpio/cpio.mk
diff --git a/fs/ext2/ext2root.mk b/fs/ext2/ext2.mk
similarity index 100%
rename from fs/ext2/ext2root.mk
rename to fs/ext2/ext2.mk
diff --git a/fs/jffs2/jffs2root.mk b/fs/jffs2/jffs2.mk
similarity index 100%
rename from fs/jffs2/jffs2root.mk
rename to fs/jffs2/jffs2.mk
diff --git a/fs/squashfs/squashfsroot.mk b/fs/squashfs/squashfs.mk
similarity index 100%
rename from fs/squashfs/squashfsroot.mk
rename to fs/squashfs/squashfs.mk
diff --git a/fs/tar/tarroot.mk b/fs/tar/tar.mk
similarity index 100%
rename from fs/tar/tarroot.mk
rename to fs/tar/tar.mk
diff --git a/fs/ubifs/ubifsroot.mk b/fs/ubifs/ubifs.mk
similarity index 100%
rename from fs/ubifs/ubifsroot.mk
rename to fs/ubifs/ubifs.mk
--
1.6.3.3
^ permalink raw reply [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 43/44] Update defconfigs after fs cleanup
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (41 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 42/44] Coherent naming for .mk files in fs/ Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 44/44] fs/*/Config.in: remove useless configuration comments Thomas Petazzoni
` (2 subsequent siblings)
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
configs/at91rm9200df_defconfig | 8 ++++----
configs/at91rm9200df_ext_defconfig | 8 ++++----
configs/at91sam9260dfc_defconfig | 8 ++++----
configs/at91sam9260dfc_ext_defconfig | 8 ++++----
configs/at91sam9260pf_defconfig | 4 ++--
configs/at91sam9261ek_defconfig | 8 ++++----
configs/at91sam9261ek_ext_defconfig | 8 ++++----
configs/at91sam9263ek_defconfig | 8 ++++----
configs/at91sam9263ek_ext_defconfig | 8 ++++----
configs/at91sam9g20dfc_defconfig | 8 ++++----
configs/at91sam9g20dfc_ext_defconfig | 8 ++++----
configs/atngw100-base_defconfig | 6 +++---
configs/atngw100_defconfig | 6 +++---
configs/atstk1005_defconfig | 6 +++---
configs/atstk100x_defconfig | 6 +++---
configs/i386_defconfig | 4 ++--
configs/i686_defconfig | 4 ++--
configs/integrator926_defconfig | 6 +++---
configs/integrator926_huge_defconfig | 6 +++---
configs/kb9202_defconfig | 2 +-
configs/v100sc2_defconfig | 2 +-
21 files changed, 66 insertions(+), 66 deletions(-)
diff --git a/configs/at91rm9200df_defconfig b/configs/at91rm9200df_defconfig
index d5c5249..1fe6e3f 100644
--- a/configs/at91rm9200df_defconfig
+++ b/configs/at91rm9200df_defconfig
@@ -853,12 +853,12 @@ BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
-BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
+
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
-BR2_TARGET_ROOTFS_EXT2_COPYTO="/tftpboot"
+
BR2_TARGET_ROOTFS_JFFS2=y
BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056=y
# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528 is not set
@@ -875,8 +875,8 @@ BR2_TARGET_ROOTFS_JFFS2_LE=y
# BR2_TARGET_ROOTFS_JFFS2_BE is not set
# BR2_TARGET_ROOTFS_JFFS2_SQUASH is not set
# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
-BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
-BR2_TARGET_ROOTFS_JFFS2_COPYTO="/tftpboot"
+
+
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
diff --git a/configs/at91rm9200df_ext_defconfig b/configs/at91rm9200df_ext_defconfig
index ca03b76..32843ba 100644
--- a/configs/at91rm9200df_ext_defconfig
+++ b/configs/at91rm9200df_ext_defconfig
@@ -778,12 +778,12 @@ BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
-BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
+
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
-BR2_TARGET_ROOTFS_EXT2_COPYTO="/tftpboot"
+
BR2_TARGET_ROOTFS_JFFS2=y
BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056=y
# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528 is not set
@@ -800,8 +800,8 @@ BR2_TARGET_ROOTFS_JFFS2_LE=y
# BR2_TARGET_ROOTFS_JFFS2_BE is not set
# BR2_TARGET_ROOTFS_JFFS2_SQUASH is not set
# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
-BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
-BR2_TARGET_ROOTFS_JFFS2_COPYTO="/tftpboot"
+
+
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
diff --git a/configs/at91sam9260dfc_defconfig b/configs/at91sam9260dfc_defconfig
index 2d8961c..46166e0 100644
--- a/configs/at91sam9260dfc_defconfig
+++ b/configs/at91sam9260dfc_defconfig
@@ -867,12 +867,12 @@ BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
-BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
+
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
-BR2_TARGET_ROOTFS_EXT2_COPYTO="/tftpboot"
+
BR2_TARGET_ROOTFS_JFFS2=y
BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056=y
# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528 is not set
@@ -889,8 +889,8 @@ BR2_TARGET_ROOTFS_JFFS2_LE=y
# BR2_TARGET_ROOTFS_JFFS2_BE is not set
# BR2_TARGET_ROOTFS_JFFS2_SQUASH is not set
# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
-BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
-BR2_TARGET_ROOTFS_JFFS2_COPYTO="/tftpboot"
+
+
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
diff --git a/configs/at91sam9260dfc_ext_defconfig b/configs/at91sam9260dfc_ext_defconfig
index ddd4b42..7f12884 100644
--- a/configs/at91sam9260dfc_ext_defconfig
+++ b/configs/at91sam9260dfc_ext_defconfig
@@ -786,12 +786,12 @@ BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
-BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
+
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
-BR2_TARGET_ROOTFS_EXT2_COPYTO="/tftpboot"
+
BR2_TARGET_ROOTFS_JFFS2=y
BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056=y
# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528 is not set
@@ -808,8 +808,8 @@ BR2_TARGET_ROOTFS_JFFS2_LE=y
# BR2_TARGET_ROOTFS_JFFS2_BE is not set
# BR2_TARGET_ROOTFS_JFFS2_SQUASH is not set
# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
-BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
-BR2_TARGET_ROOTFS_JFFS2_COPYTO="/tftpboot"
+
+
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
diff --git a/configs/at91sam9260pf_defconfig b/configs/at91sam9260pf_defconfig
index 17477d2..b9e8a28 100644
--- a/configs/at91sam9260pf_defconfig
+++ b/configs/at91sam9260pf_defconfig
@@ -558,12 +558,12 @@ BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
-BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
+
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
-BR2_TARGET_ROOTFS_EXT2_COPYTO=""
+
# BR2_TARGET_ROOTFS_JFFS2 is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
diff --git a/configs/at91sam9261ek_defconfig b/configs/at91sam9261ek_defconfig
index 824a503..1073e78 100644
--- a/configs/at91sam9261ek_defconfig
+++ b/configs/at91sam9261ek_defconfig
@@ -918,12 +918,12 @@ BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
-BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
+
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
-BR2_TARGET_ROOTFS_EXT2_COPYTO=""
+
BR2_TARGET_ROOTFS_JFFS2=y
# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056 is not set
# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528 is not set
@@ -941,8 +941,8 @@ BR2_TARGET_ROOTFS_JFFS2_LE=y
# BR2_TARGET_ROOTFS_JFFS2_BE is not set
# BR2_TARGET_ROOTFS_JFFS2_SQUASH is not set
# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
-BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
-BR2_TARGET_ROOTFS_JFFS2_COPYTO=""
+
+
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
diff --git a/configs/at91sam9261ek_ext_defconfig b/configs/at91sam9261ek_ext_defconfig
index 3ee047c..d7f9f4a 100644
--- a/configs/at91sam9261ek_ext_defconfig
+++ b/configs/at91sam9261ek_ext_defconfig
@@ -874,12 +874,12 @@ BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
-BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
+
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
-BR2_TARGET_ROOTFS_EXT2_COPYTO=""
+
BR2_TARGET_ROOTFS_JFFS2=y
# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056 is not set
# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528 is not set
@@ -897,8 +897,8 @@ BR2_TARGET_ROOTFS_JFFS2_LE=y
# BR2_TARGET_ROOTFS_JFFS2_BE is not set
# BR2_TARGET_ROOTFS_JFFS2_SQUASH is not set
# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
-BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
-BR2_TARGET_ROOTFS_JFFS2_COPYTO=""
+
+
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
diff --git a/configs/at91sam9263ek_defconfig b/configs/at91sam9263ek_defconfig
index 8dff3e4..74dbfcd 100644
--- a/configs/at91sam9263ek_defconfig
+++ b/configs/at91sam9263ek_defconfig
@@ -915,12 +915,12 @@ BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
-BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
+
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
-BR2_TARGET_ROOTFS_EXT2_COPYTO=""
+
BR2_TARGET_ROOTFS_JFFS2=y
# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056 is not set
# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528 is not set
@@ -938,8 +938,8 @@ BR2_TARGET_ROOTFS_JFFS2_LE=y
# BR2_TARGET_ROOTFS_JFFS2_BE is not set
# BR2_TARGET_ROOTFS_JFFS2_SQUASH is not set
# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
-BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
-BR2_TARGET_ROOTFS_JFFS2_COPYTO=""
+
+
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
diff --git a/configs/at91sam9263ek_ext_defconfig b/configs/at91sam9263ek_ext_defconfig
index a84cc7a..44c30e2 100644
--- a/configs/at91sam9263ek_ext_defconfig
+++ b/configs/at91sam9263ek_ext_defconfig
@@ -836,12 +836,12 @@ BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
-BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
+
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
-BR2_TARGET_ROOTFS_EXT2_COPYTO=""
+
BR2_TARGET_ROOTFS_JFFS2=y
# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056 is not set
# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528 is not set
@@ -859,8 +859,8 @@ BR2_TARGET_ROOTFS_JFFS2_LE=y
# BR2_TARGET_ROOTFS_JFFS2_BE is not set
# BR2_TARGET_ROOTFS_JFFS2_SQUASH is not set
# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
-BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
-BR2_TARGET_ROOTFS_JFFS2_COPYTO=""
+
+
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
diff --git a/configs/at91sam9g20dfc_defconfig b/configs/at91sam9g20dfc_defconfig
index 3f7da32..9b3af76 100644
--- a/configs/at91sam9g20dfc_defconfig
+++ b/configs/at91sam9g20dfc_defconfig
@@ -783,12 +783,12 @@ BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
-BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
+
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
-BR2_TARGET_ROOTFS_EXT2_COPYTO="/tftpboot"
+
BR2_TARGET_ROOTFS_JFFS2=y
BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056=y
# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528 is not set
@@ -805,8 +805,8 @@ BR2_TARGET_ROOTFS_JFFS2_LE=y
# BR2_TARGET_ROOTFS_JFFS2_BE is not set
# BR2_TARGET_ROOTFS_JFFS2_SQUASH is not set
# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
-BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
-BR2_TARGET_ROOTFS_JFFS2_COPYTO="/tftpboot"
+
+
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
diff --git a/configs/at91sam9g20dfc_ext_defconfig b/configs/at91sam9g20dfc_ext_defconfig
index 84d703a..5bf6ea7 100644
--- a/configs/at91sam9g20dfc_ext_defconfig
+++ b/configs/at91sam9g20dfc_ext_defconfig
@@ -786,12 +786,12 @@ BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
-BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
+
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
-BR2_TARGET_ROOTFS_EXT2_COPYTO="/tftpboot"
+
BR2_TARGET_ROOTFS_JFFS2=y
BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056=y
# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528 is not set
@@ -808,8 +808,8 @@ BR2_TARGET_ROOTFS_JFFS2_LE=y
# BR2_TARGET_ROOTFS_JFFS2_BE is not set
# BR2_TARGET_ROOTFS_JFFS2_SQUASH is not set
# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
-BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
-BR2_TARGET_ROOTFS_JFFS2_COPYTO="/tftpboot"
+
+
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
diff --git a/configs/atngw100-base_defconfig b/configs/atngw100-base_defconfig
index adae5c6..fe34989 100644
--- a/configs/atngw100-base_defconfig
+++ b/configs/atngw100-base_defconfig
@@ -723,8 +723,8 @@ BR2_TARGET_ROOTFS_JFFS2_PADSIZE=0x0
# BR2_TARGET_ROOTFS_JFFS2_LE is not set
BR2_TARGET_ROOTFS_JFFS2_BE=y
# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
-BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
-BR2_TARGET_ROOTFS_JFFS2_COPYTO=""
+
+
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
BR2_TARGET_ROOTFS_TAR=y
@@ -733,7 +733,7 @@ BR2_TARGET_ROOTFS_TAR_NONE=y
# BR2_TARGET_ROOTFS_TAR_BZIP2 is not set
# BR2_TARGET_ROOTFS_TAR_LZMA is not set
BR2_TARGET_ROOTFS_TAR_OPTIONS=""
-BR2_TARGET_ROOTFS_TAR_COPYTO=""
+
# BR2_TARGET_ROOTFS_CPIO is not set
# BR2_TARGET_ROOTFS_INITRAMFS is not set
# BR2_TARGET_ROOTFS_ROMFS is not set
diff --git a/configs/atngw100_defconfig b/configs/atngw100_defconfig
index 0c76398..4a702a5 100644
--- a/configs/atngw100_defconfig
+++ b/configs/atngw100_defconfig
@@ -713,8 +713,8 @@ BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER=y
# BR2_TARGET_ROOTFS_JFFS2_LE is not set
BR2_TARGET_ROOTFS_JFFS2_BE=y
# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
-BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
-BR2_TARGET_ROOTFS_JFFS2_COPYTO="/tftpboot"
+
+
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
BR2_TARGET_ROOTFS_TAR=y
@@ -723,7 +723,7 @@ BR2_TARGET_ROOTFS_TAR_NONE=y
# BR2_TARGET_ROOTFS_TAR_BZIP2 is not set
# BR2_TARGET_ROOTFS_TAR_LZMA is not set
BR2_TARGET_ROOTFS_TAR_OPTIONS=""
-BR2_TARGET_ROOTFS_TAR_COPYTO=""
+
# BR2_TARGET_ROOTFS_CPIO is not set
# BR2_TARGET_ROOTFS_INITRAMFS is not set
# BR2_TARGET_ROOTFS_ROMFS is not set
diff --git a/configs/atstk1005_defconfig b/configs/atstk1005_defconfig
index 8044b38..c829495 100644
--- a/configs/atstk1005_defconfig
+++ b/configs/atstk1005_defconfig
@@ -757,8 +757,8 @@ BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER=y
BR2_TARGET_ROOTFS_JFFS2_BE=y
# BR2_TARGET_ROOTFS_JFFS2_SQUASH is not set
# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
-BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
-BR2_TARGET_ROOTFS_JFFS2_COPYTO="/tftpboot"
+
+
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
BR2_TARGET_ROOTFS_TAR=y
@@ -767,7 +767,7 @@ BR2_TARGET_ROOTFS_TAR_NONE=y
# BR2_TARGET_ROOTFS_TAR_BZIP2 is not set
# BR2_TARGET_ROOTFS_TAR_LZMA is not set
BR2_TARGET_ROOTFS_TAR_OPTIONS=""
-BR2_TARGET_ROOTFS_TAR_COPYTO=""
+
# BR2_TARGET_ROOTFS_CPIO is not set
# BR2_TARGET_ROOTFS_INITRAMFS is not set
# BR2_TARGET_ROOTFS_ROMFS is not set
diff --git a/configs/atstk100x_defconfig b/configs/atstk100x_defconfig
index aac5aa8..c1398d4 100644
--- a/configs/atstk100x_defconfig
+++ b/configs/atstk100x_defconfig
@@ -848,12 +848,12 @@ BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
-BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
+
# BR2_TARGET_ROOTFS_EXT2_NONE is not set
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
BR2_TARGET_ROOTFS_EXT2_BZIP2=y
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
-BR2_TARGET_ROOTFS_EXT2_COPYTO="/tftpboot"
+
# BR2_TARGET_ROOTFS_JFFS2 is not set
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
@@ -863,7 +863,7 @@ BR2_TARGET_ROOTFS_TAR_NONE=y
# BR2_TARGET_ROOTFS_TAR_BZIP2 is not set
# BR2_TARGET_ROOTFS_TAR_LZMA is not set
BR2_TARGET_ROOTFS_TAR_OPTIONS=""
-BR2_TARGET_ROOTFS_TAR_COPYTO=""
+
# BR2_TARGET_ROOTFS_CPIO is not set
# BR2_TARGET_ROOTFS_INITRAMFS is not set
# BR2_TARGET_ROOTFS_ROMFS is not set
diff --git a/configs/i386_defconfig b/configs/i386_defconfig
index f4506f1..4c2d092 100644
--- a/configs/i386_defconfig
+++ b/configs/i386_defconfig
@@ -701,8 +701,8 @@ BR2_TARGET_ROOTFS_JFFS2_EBSIZE=0x20000
BR2_TARGET_ROOTFS_JFFS2_LE=y
# BR2_TARGET_ROOTFS_JFFS2_BE is not set
# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
-BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
-BR2_TARGET_ROOTFS_JFFS2_COPYTO=""
+
+
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
diff --git a/configs/i686_defconfig b/configs/i686_defconfig
index fc1f278..dcf35d7 100644
--- a/configs/i686_defconfig
+++ b/configs/i686_defconfig
@@ -701,8 +701,8 @@ BR2_TARGET_ROOTFS_JFFS2_EBSIZE=0x20000
BR2_TARGET_ROOTFS_JFFS2_LE=y
# BR2_TARGET_ROOTFS_JFFS2_BE is not set
# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
-BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
-BR2_TARGET_ROOTFS_JFFS2_COPYTO=""
+
+
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
diff --git a/configs/integrator926_defconfig b/configs/integrator926_defconfig
index e985df4..e537b40 100644
--- a/configs/integrator926_defconfig
+++ b/configs/integrator926_defconfig
@@ -687,12 +687,12 @@ BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
-BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
+
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
-BR2_TARGET_ROOTFS_EXT2_COPYTO=""
+
# BR2_TARGET_ROOTFS_JFFS2 is not set
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
@@ -702,7 +702,7 @@ BR2_TARGET_ROOTFS_TAR_NONE=y
# BR2_TARGET_ROOTFS_TAR_BZIP2 is not set
# BR2_TARGET_ROOTFS_TAR_LZMA is not set
BR2_TARGET_ROOTFS_TAR_OPTIONS=""
-BR2_TARGET_ROOTFS_TAR_COPYTO=""
+
# BR2_TARGET_ROOTFS_CPIO is not set
# BR2_TARGET_ROOTFS_INITRAMFS is not set
# BR2_TARGET_ROOTFS_ROMFS is not set
diff --git a/configs/integrator926_huge_defconfig b/configs/integrator926_huge_defconfig
index b0d1dfe..276d69a 100644
--- a/configs/integrator926_huge_defconfig
+++ b/configs/integrator926_huge_defconfig
@@ -664,12 +664,12 @@ BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
-BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
+
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
-BR2_TARGET_ROOTFS_EXT2_COPYTO=""
+
# BR2_TARGET_ROOTFS_JFFS2 is not set
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
@@ -679,7 +679,7 @@ BR2_TARGET_ROOTFS_CPIO_NONE=y
# BR2_TARGET_ROOTFS_CPIO_GZIP is not set
# BR2_TARGET_ROOTFS_CPIO_BZIP2 is not set
# BR2_TARGET_ROOTFS_CPIO_LZMA is not set
-BR2_TARGET_ROOTFS_CPIO_COPYTO=""
+
# BR2_TARGET_ROOTFS_INITRAMFS is not set
# BR2_TARGET_ROOTFS_ROMFS is not set
diff --git a/configs/kb9202_defconfig b/configs/kb9202_defconfig
index 3a0dfd6..67e6d68 100644
--- a/configs/kb9202_defconfig
+++ b/configs/kb9202_defconfig
@@ -672,7 +672,7 @@ BR2_TARGET_ROOTFS_TAR_NONE=y
# BR2_TARGET_ROOTFS_TAR_BZIP2 is not set
# BR2_TARGET_ROOTFS_TAR_LZMA is not set
BR2_TARGET_ROOTFS_TAR_OPTIONS=""
-BR2_TARGET_ROOTFS_TAR_COPYTO=""
+
# BR2_TARGET_ROOTFS_CPIO is not set
# BR2_TARGET_ROOTFS_INITRAMFS is not set
# BR2_TARGET_ROOTFS_ROMFS is not set
diff --git a/configs/v100sc2_defconfig b/configs/v100sc2_defconfig
index 3c2afa4..836321a 100644
--- a/configs/v100sc2_defconfig
+++ b/configs/v100sc2_defconfig
@@ -703,7 +703,7 @@ BR2_TARGET_ROOTFS_TAR_NONE=y
# BR2_TARGET_ROOTFS_TAR_BZIP2 is not set
# BR2_TARGET_ROOTFS_TAR_LZMA is not set
BR2_TARGET_ROOTFS_TAR_OPTIONS=""
-BR2_TARGET_ROOTFS_TAR_COPYTO=""
+
# BR2_TARGET_ROOTFS_CPIO is not set
# BR2_TARGET_ROOTFS_INITRAMFS is not set
# BR2_TARGET_ROOTFS_ROMFS is not set
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [PATCH 44/44] fs/*/Config.in: remove useless configuration comments
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (42 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 43/44] Update defconfigs after fs cleanup Thomas Petazzoni
@ 2010-04-09 9:07 ` Thomas Petazzoni
2010-04-09 9:20 ` [Buildroot] [pull request] Pull request for branch fs-cleanup Peter Korsgaard
2010-04-09 14:19 ` Peter Korsgaard
45 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 9:07 UTC (permalink / raw)
To: buildroot
The dependency on gzip, bzip2 and lzma are properly handled
automatically. No need to tell the user about this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
fs/cpio/Config.in | 6 ------
fs/ext2/Config.in | 6 ------
fs/tar/Config.in | 6 ------
fs/ubifs/Config.in | 9 ---------
4 files changed, 0 insertions(+), 27 deletions(-)
diff --git a/fs/cpio/Config.in b/fs/cpio/Config.in
index 02fd00d..374cfe0 100644
--- a/fs/cpio/Config.in
+++ b/fs/cpio/Config.in
@@ -19,22 +19,16 @@ config BR2_TARGET_ROOTFS_CPIO_GZIP
bool "gzip"
help
Do compress the cpio filesystem with gzip.
- Note that you either have to have gzip installed on your host
- or select to build a gzip for your host. See the packages submenu.
config BR2_TARGET_ROOTFS_CPIO_BZIP2
bool "bzip2"
help
Do compress the cpio filesystem with bzip2.
- Note that you either have to have bzip2 installed on your host
- or select to build a bzip2 for your host. See the packages submenu.
config BR2_TARGET_ROOTFS_CPIO_LZMA
bool "lzma"
help
Do compress the cpio filesystem with lzma.
- Note that you either have to have lzma installed on your host
- or select to build a lzma for your host. See the packages submenu.
endchoice
diff --git a/fs/ext2/Config.in b/fs/ext2/Config.in
index 02ec18f..5c041d9 100644
--- a/fs/ext2/Config.in
+++ b/fs/ext2/Config.in
@@ -40,22 +40,16 @@ config BR2_TARGET_ROOTFS_EXT2_GZIP
bool "gzip"
help
Do compress the ext2 filesystem with gzip.
- Note that you either have to have gzip installed on your host
- or select to build a gzip for your host. See the packages submenu.
config BR2_TARGET_ROOTFS_EXT2_BZIP2
bool "bzip2"
help
Do compress the ext2 filesystem with bzip2.
- Note that you either have to have bzip2 installed on your host
- or select to build a bzip2 for your host. See the packages submenu.
config BR2_TARGET_ROOTFS_EXT2_LZMA
bool "lzma"
help
Do compress the ext2 filesystem with lzma.
- Note that you either have to have lzma installed on your host
- or select to build a lzma for your host. See the packages submenu.
endchoice
diff --git a/fs/tar/Config.in b/fs/tar/Config.in
index 0adca79..5aaf9bd 100644
--- a/fs/tar/Config.in
+++ b/fs/tar/Config.in
@@ -19,22 +19,16 @@ config BR2_TARGET_ROOTFS_TAR_GZIP
bool "gzip"
help
Do compress the tarball with gzip.
- Note that you either have to have gzip installed on your host
- or select to build a gzip for your host. See the packages submenu.
config BR2_TARGET_ROOTFS_TAR_BZIP2
bool "bzip2"
help
Do compress the tarball with bzip2.
- Note that you either have to have bzip2 installed on your host
- or select to build a bzip2 for your host. See the packages submenu.
config BR2_TARGET_ROOTFS_TAR_LZMA
bool "lzma"
help
Do compress the tarball with lzma.
- Note that you either have to have lzma installed on your host
- or select to build a lzma for your host. See the packages submenu.
endchoice
diff --git a/fs/ubifs/Config.in b/fs/ubifs/Config.in
index 9fa510e..bcf409c 100644
--- a/fs/ubifs/Config.in
+++ b/fs/ubifs/Config.in
@@ -64,25 +64,16 @@ config BR2_TARGET_ROOTFS_UBIFS_GZIP
bool "gzip"
help
Do compress the ubifs filesystem with gzip.
- Note that you either have to have gzip installed on your
- host or select to build a gzip for your host. See the
- packages submenu.
config BR2_TARGET_ROOTFS_UBIFS_BZIP2
bool "bzip2"
help
Do compress the ubifs filesystem with bzip2.
- Note that you either have to have bzip2 installed on your
- host or select to build a bzip2 for your host. See the
- packages submenu.
config BR2_TARGET_ROOTFS_UBIFS_LZMA
bool "lzma"
help
Do compress the ubifs filesystem with lzma.
- Note that you either have to have lzma installed on your
- host or select to build a lzma for your host. See the
- packages submenu.
endchoice
--
1.6.3.3
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [Buildroot] [pull request] Pull request for branch fs-cleanup
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (43 preceding siblings ...)
2010-04-09 9:07 ` [Buildroot] [PATCH 44/44] fs/*/Config.in: remove useless configuration comments Thomas Petazzoni
@ 2010-04-09 9:20 ` Peter Korsgaard
2010-04-09 12:54 ` Thomas Petazzoni
2010-04-09 14:19 ` Peter Korsgaard
45 siblings, 1 reply; 48+ messages in thread
From: Peter Korsgaard @ 2010-04-09 9:20 UTC (permalink / raw)
To: buildroot
>>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes:
Hi,
Thomas> This patchset implements a major rework of the code that
Thomas> generates the root filesystem generation. It is part of a more
Thomas> general work that aims at cleaning up the contents of the
Thomas> target/ directory.
Thomas> Each patch has a description detailing its changes but here is
Thomas> the list of the major steps that this patch set goes through :
Looks very good, thanks!
Thomas> - New squashfs package, supported for both target and host
Thomas> note that I removed support for SquashFS 3.x
The squashfs 4.0 filesystem exists for 1 year now, so it's quite new
(and tied to kernel versions) - Aren't we leaving people with older
kernels out in the cold?
Maybe now is the time to get rid of the old version, I don't know - But
3.4 was not marked as deprecated (only recent) in 2010.02.
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 48+ messages in thread
* [Buildroot] [pull request] Pull request for branch fs-cleanup
2010-04-09 9:20 ` [Buildroot] [pull request] Pull request for branch fs-cleanup Peter Korsgaard
@ 2010-04-09 12:54 ` Thomas Petazzoni
0 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2010-04-09 12:54 UTC (permalink / raw)
To: buildroot
On Fri, 09 Apr 2010 11:20:37 +0200
Peter Korsgaard <jacmet@uclibc.org> wrote:
> Thomas> This patchset implements a major rework of the code that
> Thomas> generates the root filesystem generation. It is part of a more
> Thomas> general work that aims at cleaning up the contents of the
> Thomas> target/ directory.
>
> Thomas> Each patch has a description detailing its changes but here is
> Thomas> the list of the major steps that this patch set goes through :
>
> Looks very good, thanks!
Thanks. As I said, there are probably some issues left here and there,
but that's not the scariest part of the target/ directory cleanup :-)
> The squashfs 4.0 filesystem exists for 1 year now, so it's quite new
> (and tied to kernel versions) - Aren't we leaving people with older
> kernels out in the cold?
>
> Maybe now is the time to get rid of the old version, I don't know - But
> 3.4 was not marked as deprecated (only recent) in 2010.02.
As discussed on IRC, I've sent a new pull request for my "squashfs3"
branch which re-introduces squashfs 3.x support, marked as
BR2_DEPRECATED.
Thanks!
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 48+ messages in thread
* [Buildroot] [pull request] Pull request for branch fs-cleanup
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
` (44 preceding siblings ...)
2010-04-09 9:20 ` [Buildroot] [pull request] Pull request for branch fs-cleanup Peter Korsgaard
@ 2010-04-09 14:19 ` Peter Korsgaard
45 siblings, 0 replies; 48+ messages in thread
From: Peter Korsgaard @ 2010-04-09 14:19 UTC (permalink / raw)
To: buildroot
>>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes:
Thomas> This patchset implements a major rework of the code that generates the
Thomas> root filesystem generation. It is part of a more general work that
Thomas> aims at cleaning up the contents of the target/ directory.
Committed, thanks a lot!
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 48+ messages in thread
end of thread, other threads:[~2010-04-09 14:19 UTC | newest]
Thread overview: 48+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-04-09 9:06 [Buildroot] [pull request] Pull request for branch fs-cleanup Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 01/44] genromfs: add new package Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 02/44] genext2fs: " Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 03/44] cramfs: " Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 04/44] squashfs: " Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 05/44] libcap: " Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 06/44] bzip2: convert to gentargets, add host package, bump version Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 07/44] cmake: new package Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 08/44] cdrkit: " Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 09/44] e2fsprogs: add support for host package Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 10/44] mtd: convert to gentargets, add " Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 11/44] cloop: new package Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 12/44] lzma: convert the host package to the autotools infrastructure Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 13/44] target/cloop: cleanup Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 14/44] target/cpio: cleanup Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 15/44] target/cramfs: cleanup Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 16/44] target/ext2: cleanup Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 17/44] target/iso9660: cleanup Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 18/44] target/jffs2: cleanup Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 19/44] target/romfs: cleanup Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 20/44] target/squashfs: cleanup, remove support for 3.x Thomas Petazzoni
2010-04-09 9:06 ` [Buildroot] [PATCH 21/44] target/tar: cleanup Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 22/44] target/ubifs: cleanup, unbroken Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 23/44] fakeroot: convert to the autotools infrastructure Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 24/44] fakeroot: remove all references to BR2_HOST_FAKEROOT Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 25/44] target/: remove the COPYTO mess Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 26/44] target: Add new infrastructure for filesystem generation Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 27/44] cloop: convert to ROOTFS_TARGET infrastructure Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 28/44] cpio: " Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 29/44] cramfs: " Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 30/44] romfs: " Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 31/44] tar: " Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 32/44] squashfs: " Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 33/44] ext2: " Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 34/44] jffs2: " Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 35/44] ubifs: " Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 36/44] initramfs: " Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 37/44] busybox initramfs: do not use the IMAGE variable Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 38/44] target/common: do not use IMAGE Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 39/44] iso9660: rework in a similar way to ROOTFS_TARGET Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 40/44] Remove IMAGE and related configuration options Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 41/44] Move all filesystem generation code to fs/ Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 42/44] Coherent naming for .mk files in fs/ Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 43/44] Update defconfigs after fs cleanup Thomas Petazzoni
2010-04-09 9:07 ` [Buildroot] [PATCH 44/44] fs/*/Config.in: remove useless configuration comments Thomas Petazzoni
2010-04-09 9:20 ` [Buildroot] [pull request] Pull request for branch fs-cleanup Peter Korsgaard
2010-04-09 12:54 ` Thomas Petazzoni
2010-04-09 14:19 ` Peter Korsgaard
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.