* [PATCH 11/23] Make register values available to M68K panic notifiers
@ 2010-04-12 6:04 David VomLehn
2010-04-12 7:59 ` Fwd: " Geert Uytterhoeven
0 siblings, 1 reply; 4+ messages in thread
From: David VomLehn @ 2010-04-12 6:04 UTC (permalink / raw)
To: to, linux_arch, linux_arch; +Cc: akpm, linux-kernel, maint_arch
The save_ptregs() function has not been tested or even built. I will need
help to complete this.
This appeared to require a Makefile change in order to compile kernel/entry.S.
The problem was that it was complaining about having an "invalid instruction
for this architecture; needs 68000 or higher". Choosing a processor didn't
seem to help, but adding the processor to KBUILD_AFLAGS in appropriate places
resolved the problem. Has bit rot set in to the m68k tree?
Signed-off-by: David VomLehn <dvomlehn@cisco.com>
---
arch/m68k/Makefile | 2 +
arch/m68k/include/asm/ptrace.h | 74 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 76 insertions(+), 0 deletions(-)
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 570d85c..bab0202 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -41,10 +41,12 @@ ifndef CONFIG_M68030
ifndef CONFIG_M68060
KBUILD_CFLAGS += -m68040
+KBUILD_AFLAGS += -m68040
endif
ifndef CONFIG_M68040
KBUILD_CFLAGS += -m68060
+KBUILD_AFLAGS += -m68060
endif
endif
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
index ee4011c..2786ea4 100644
--- a/arch/m68k/include/asm/ptrace.h
+++ b/arch/m68k/include/asm/ptrace.h
@@ -85,6 +85,80 @@ struct switch_stack {
#define profile_pc(regs) instruction_pointer(regs)
extern void show_regs(struct pt_regs *);
+/* Macros for saving the contents of registers and for the output constraint
+ * for those registers */
+
+#include <linux/ptreg.h>
+
+#define PTREG_SAVE(r, name) "movel %" #r ", %[" #name "]\n"
+#define PTREG_SAVE_D(i) _PTREG_SAVE_I(d, d, i)
+#define PTREG_SAVE_A(i) _PTREG_SAVE_I(a, a, i)
+
+#define PTREG_OUT_D(regs, i) _PTREG_OUT_I(regs, d, d, i)
+#define PTREG_OUT_A(regs, i) _PTREG_OUT_I(regs, a, a, i)
+
+#define arch_has_save_ptregs 1
+
+/**
+ * save_ptregs - save processor registers for backtracing
+ * @regs: Pointer to &struct pt_regs structure in which to save the
+ * registers
+ *
+ * Returns a constant pointer to @regs.
+ *
+ * This function must be called first in a function. There must be no
+ * auto variables defined that are initialized before calling this function.
+ */
+static __always_inline
+const struct pt_regs *save_ptregs(struct pt_regs *regs)
+{
+ __asm__ __volatile__ (
+ PTREG_SAVE_D(1)
+ PTREG_SAVE_D(2)
+ PTREG_SAVE_D(3)
+ PTREG_SAVE_D(4)
+ PTREG_SAVE_D(5)
+ PTREG_SAVE_A(0)
+ PTREG_SAVE_A(1)
+ PTREG_SAVE_A(2)
+ PTREG_SAVE_D(0)
+ PTREG_SAVE(orig_d0, orig_d0)
+ PTREG_SAVE(stkadj, stkadj)
+#if 0
+ PTREG_SAVE(format, format)
+ PTREG_SAVE(vector, vector)
+#endif
+ PTREG_SAVE(sr, sr)
+ "1:\n"
+ "lea 1b, %a0"
+ PTREG_SAVE(a0, pc)
+ :
+ PTREG_OUT_D(regs, 0),
+ PTREG_OUT_D(regs, 1),
+ PTREG_OUT_D(regs, 2),
+ PTREG_OUT_D(regs, 3),
+ PTREG_OUT_D(regs, 4),
+ PTREG_OUT_D(regs, 5),
+ PTREG_OUT_A(regs, 0),
+ PTREG_OUT_A(regs, 1),
+ PTREG_OUT_A(regs, 2),
+ PTREG_OUT(regs, orig_d0, orig_d0),
+ PTREG_OUT(regs, stkadj, stkadj),
+#if 0
+/* Are these registers that must be saved? */
+ PTREG_OUT(regs, format, format),
+ PTREG_OUT(regs, vector, vector),
+#endif
+ PTREG_OUT(regs, sr, sr),
+ PTREG_OUT(regs, pc, pc)
+ :
+ :
+ "a0"
+ );
+
+ return regs;
+}
+
/*
* These are defined as per linux/ptrace.h.
*/
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Fwd: [PATCH 11/23] Make register values available to M68K panic notifiers
2010-04-12 6:04 [PATCH 11/23] Make register values available to M68K panic notifiers David VomLehn
@ 2010-04-12 7:59 ` Geert Uytterhoeven
0 siblings, 0 replies; 4+ messages in thread
From: Geert Uytterhoeven @ 2010-04-12 7:59 UTC (permalink / raw)
To: Linux/m68k
---------- Forwarded message ----------
From: David VomLehn <dvomlehn@cisco.com>
Date: Mon, Apr 12, 2010 at 08:04
Subject: [PATCH 11/23] Make register values available to M68K panic notifiers
To: to@dvomlehn-lnx2.corp.sa.net,
"linux_arch"@dvomlehn-lnx2.corp.sa.net,
linux_arch@dvomlehn-lnx2.corp.sa.net
Cc: akpm@linux-foundation.org, linux-kernel@vger.kernel.org,
maint_arch@dvomlehn-lnx2.corp.sa.net
The save_ptregs() function has not been tested or even built. I will need
help to complete this.
This appeared to require a Makefile change in order to compile kernel/entry.S.
The problem was that it was complaining about having an "invalid instruction
for this architecture; needs 68000 or higher". Choosing a processor didn't
seem to help, but adding the processor to KBUILD_AFLAGS in appropriate places
resolved the problem. Has bit rot set in to the m68k tree?
Signed-off-by: David VomLehn <dvomlehn@cisco.com>
---
arch/m68k/Makefile | 2 +
arch/m68k/include/asm/ptrace.h | 74 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 76 insertions(+), 0 deletions(-)
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 570d85c..bab0202 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -41,10 +41,12 @@ ifndef CONFIG_M68030
ifndef CONFIG_M68060
KBUILD_CFLAGS += -m68040
+KBUILD_AFLAGS += -m68040
endif
ifndef CONFIG_M68040
KBUILD_CFLAGS += -m68060
+KBUILD_AFLAGS += -m68060
endif
endif
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
index ee4011c..2786ea4 100644
--- a/arch/m68k/include/asm/ptrace.h
+++ b/arch/m68k/include/asm/ptrace.h
@@ -85,6 +85,80 @@ struct switch_stack {
#define profile_pc(regs) instruction_pointer(regs)
extern void show_regs(struct pt_regs *);
+/* Macros for saving the contents of registers and for the output constraint
+ * for those registers */
+
+#include <linux/ptreg.h>
+
+#define PTREG_SAVE(r, name) "movel %" #r ", %[" #name "]\n"
+#define PTREG_SAVE_D(i) _PTREG_SAVE_I(d, d, i)
+#define PTREG_SAVE_A(i) _PTREG_SAVE_I(a, a, i)
+
+#define PTREG_OUT_D(regs, i) _PTREG_OUT_I(regs, d, d, i)
+#define PTREG_OUT_A(regs, i) _PTREG_OUT_I(regs, a, a, i)
+
+#define arch_has_save_ptregs 1
+
+/**
+ * save_ptregs - save processor registers for backtracing
+ * @regs: Pointer to &struct pt_regs structure in which to save the
+ * registers
+ *
+ * Returns a constant pointer to @regs.
+ *
+ * This function must be called first in a function. There must be no
+ * auto variables defined that are initialized before calling this function.
+ */
+static __always_inline
+const struct pt_regs *save_ptregs(struct pt_regs *regs)
+{
+ __asm__ __volatile__ (
+ PTREG_SAVE_D(1)
+ PTREG_SAVE_D(2)
+ PTREG_SAVE_D(3)
+ PTREG_SAVE_D(4)
+ PTREG_SAVE_D(5)
+ PTREG_SAVE_A(0)
+ PTREG_SAVE_A(1)
+ PTREG_SAVE_A(2)
+ PTREG_SAVE_D(0)
+ PTREG_SAVE(orig_d0, orig_d0)
+ PTREG_SAVE(stkadj, stkadj)
+#if 0
+ PTREG_SAVE(format, format)
+ PTREG_SAVE(vector, vector)
+#endif
+ PTREG_SAVE(sr, sr)
+ "1:\n"
+ "lea 1b, %a0"
+ PTREG_SAVE(a0, pc)
+ :
+ PTREG_OUT_D(regs, 0),
+ PTREG_OUT_D(regs, 1),
+ PTREG_OUT_D(regs, 2),
+ PTREG_OUT_D(regs, 3),
+ PTREG_OUT_D(regs, 4),
+ PTREG_OUT_D(regs, 5),
+ PTREG_OUT_A(regs, 0),
+ PTREG_OUT_A(regs, 1),
+ PTREG_OUT_A(regs, 2),
+ PTREG_OUT(regs, orig_d0, orig_d0),
+ PTREG_OUT(regs, stkadj, stkadj),
+#if 0
+/* Are these registers that must be saved? */
+ PTREG_OUT(regs, format, format),
+ PTREG_OUT(regs, vector, vector),
+#endif
+ PTREG_OUT(regs, sr, sr),
+ PTREG_OUT(regs, pc, pc)
+ :
+ :
+ "a0"
+ );
+
+ return regs;
+}
+
/*
* These are defined as per linux/ptrace.h.
*/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
--
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 11/23] Make register values available to M68K panic notifiers
@ 2010-04-12 6:06 ` David VomLehn
0 siblings, 0 replies; 4+ messages in thread
From: David VomLehn @ 2010-04-12 6:06 UTC (permalink / raw)
To: to, linux-arch@vger.kernel.org, linux-arch; +Cc: akpm, linux-kernel, maint_arch
The save_ptregs() function has not been tested or even built. I will need
help to complete this.
This appeared to require a Makefile change in order to compile kernel/entry.S.
The problem was that it was complaining about having an "invalid instruction
for this architecture; needs 68000 or higher". Choosing a processor didn't
seem to help, but adding the processor to KBUILD_AFLAGS in appropriate places
resolved the problem. Has bit rot set in to the m68k tree?
Signed-off-by: David VomLehn <dvomlehn@cisco.com>
---
arch/m68k/Makefile | 2 +
arch/m68k/include/asm/ptrace.h | 74 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 76 insertions(+), 0 deletions(-)
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 570d85c..bab0202 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -41,10 +41,12 @@ ifndef CONFIG_M68030
ifndef CONFIG_M68060
KBUILD_CFLAGS += -m68040
+KBUILD_AFLAGS += -m68040
endif
ifndef CONFIG_M68040
KBUILD_CFLAGS += -m68060
+KBUILD_AFLAGS += -m68060
endif
endif
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
index ee4011c..2786ea4 100644
--- a/arch/m68k/include/asm/ptrace.h
+++ b/arch/m68k/include/asm/ptrace.h
@@ -85,6 +85,80 @@ struct switch_stack {
#define profile_pc(regs) instruction_pointer(regs)
extern void show_regs(struct pt_regs *);
+/* Macros for saving the contents of registers and for the output constraint
+ * for those registers */
+
+#include <linux/ptreg.h>
+
+#define PTREG_SAVE(r, name) "movel %" #r ", %[" #name "]\n"
+#define PTREG_SAVE_D(i) _PTREG_SAVE_I(d, d, i)
+#define PTREG_SAVE_A(i) _PTREG_SAVE_I(a, a, i)
+
+#define PTREG_OUT_D(regs, i) _PTREG_OUT_I(regs, d, d, i)
+#define PTREG_OUT_A(regs, i) _PTREG_OUT_I(regs, a, a, i)
+
+#define arch_has_save_ptregs 1
+
+/**
+ * save_ptregs - save processor registers for backtracing
+ * @regs: Pointer to &struct pt_regs structure in which to save the
+ * registers
+ *
+ * Returns a constant pointer to @regs.
+ *
+ * This function must be called first in a function. There must be no
+ * auto variables defined that are initialized before calling this function.
+ */
+static __always_inline
+const struct pt_regs *save_ptregs(struct pt_regs *regs)
+{
+ __asm__ __volatile__ (
+ PTREG_SAVE_D(1)
+ PTREG_SAVE_D(2)
+ PTREG_SAVE_D(3)
+ PTREG_SAVE_D(4)
+ PTREG_SAVE_D(5)
+ PTREG_SAVE_A(0)
+ PTREG_SAVE_A(1)
+ PTREG_SAVE_A(2)
+ PTREG_SAVE_D(0)
+ PTREG_SAVE(orig_d0, orig_d0)
+ PTREG_SAVE(stkadj, stkadj)
+#if 0
+ PTREG_SAVE(format, format)
+ PTREG_SAVE(vector, vector)
+#endif
+ PTREG_SAVE(sr, sr)
+ "1:\n"
+ "lea 1b, %a0"
+ PTREG_SAVE(a0, pc)
+ :
+ PTREG_OUT_D(regs, 0),
+ PTREG_OUT_D(regs, 1),
+ PTREG_OUT_D(regs, 2),
+ PTREG_OUT_D(regs, 3),
+ PTREG_OUT_D(regs, 4),
+ PTREG_OUT_D(regs, 5),
+ PTREG_OUT_A(regs, 0),
+ PTREG_OUT_A(regs, 1),
+ PTREG_OUT_A(regs, 2),
+ PTREG_OUT(regs, orig_d0, orig_d0),
+ PTREG_OUT(regs, stkadj, stkadj),
+#if 0
+/* Are these registers that must be saved? */
+ PTREG_OUT(regs, format, format),
+ PTREG_OUT(regs, vector, vector),
+#endif
+ PTREG_OUT(regs, sr, sr),
+ PTREG_OUT(regs, pc, pc)
+ :
+ :
+ "a0"
+ );
+
+ return regs;
+}
+
/*
* These are defined as per linux/ptrace.h.
*/
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 11/23] Make register values available to M68K panic notifiers
@ 2010-04-12 6:06 ` David VomLehn
0 siblings, 0 replies; 4+ messages in thread
From: David VomLehn @ 2010-04-12 6:06 UTC (permalink / raw)
To: to, linux-arch@vger.kernel.org; +Cc: akpm, linux-kernel, maint_arch
The save_ptregs() function has not been tested or even built. I will need
help to complete this.
This appeared to require a Makefile change in order to compile kernel/entry.S.
The problem was that it was complaining about having an "invalid instruction
for this architecture; needs 68000 or higher". Choosing a processor didn't
seem to help, but adding the processor to KBUILD_AFLAGS in appropriate places
resolved the problem. Has bit rot set in to the m68k tree?
Signed-off-by: David VomLehn <dvomlehn@cisco.com>
---
arch/m68k/Makefile | 2 +
arch/m68k/include/asm/ptrace.h | 74 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 76 insertions(+), 0 deletions(-)
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 570d85c..bab0202 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -41,10 +41,12 @@ ifndef CONFIG_M68030
ifndef CONFIG_M68060
KBUILD_CFLAGS += -m68040
+KBUILD_AFLAGS += -m68040
endif
ifndef CONFIG_M68040
KBUILD_CFLAGS += -m68060
+KBUILD_AFLAGS += -m68060
endif
endif
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
index ee4011c..2786ea4 100644
--- a/arch/m68k/include/asm/ptrace.h
+++ b/arch/m68k/include/asm/ptrace.h
@@ -85,6 +85,80 @@ struct switch_stack {
#define profile_pc(regs) instruction_pointer(regs)
extern void show_regs(struct pt_regs *);
+/* Macros for saving the contents of registers and for the output constraint
+ * for those registers */
+
+#include <linux/ptreg.h>
+
+#define PTREG_SAVE(r, name) "movel %" #r ", %[" #name "]\n"
+#define PTREG_SAVE_D(i) _PTREG_SAVE_I(d, d, i)
+#define PTREG_SAVE_A(i) _PTREG_SAVE_I(a, a, i)
+
+#define PTREG_OUT_D(regs, i) _PTREG_OUT_I(regs, d, d, i)
+#define PTREG_OUT_A(regs, i) _PTREG_OUT_I(regs, a, a, i)
+
+#define arch_has_save_ptregs 1
+
+/**
+ * save_ptregs - save processor registers for backtracing
+ * @regs: Pointer to &struct pt_regs structure in which to save the
+ * registers
+ *
+ * Returns a constant pointer to @regs.
+ *
+ * This function must be called first in a function. There must be no
+ * auto variables defined that are initialized before calling this function.
+ */
+static __always_inline
+const struct pt_regs *save_ptregs(struct pt_regs *regs)
+{
+ __asm__ __volatile__ (
+ PTREG_SAVE_D(1)
+ PTREG_SAVE_D(2)
+ PTREG_SAVE_D(3)
+ PTREG_SAVE_D(4)
+ PTREG_SAVE_D(5)
+ PTREG_SAVE_A(0)
+ PTREG_SAVE_A(1)
+ PTREG_SAVE_A(2)
+ PTREG_SAVE_D(0)
+ PTREG_SAVE(orig_d0, orig_d0)
+ PTREG_SAVE(stkadj, stkadj)
+#if 0
+ PTREG_SAVE(format, format)
+ PTREG_SAVE(vector, vector)
+#endif
+ PTREG_SAVE(sr, sr)
+ "1:\n"
+ "lea 1b, %a0"
+ PTREG_SAVE(a0, pc)
+ :
+ PTREG_OUT_D(regs, 0),
+ PTREG_OUT_D(regs, 1),
+ PTREG_OUT_D(regs, 2),
+ PTREG_OUT_D(regs, 3),
+ PTREG_OUT_D(regs, 4),
+ PTREG_OUT_D(regs, 5),
+ PTREG_OUT_A(regs, 0),
+ PTREG_OUT_A(regs, 1),
+ PTREG_OUT_A(regs, 2),
+ PTREG_OUT(regs, orig_d0, orig_d0),
+ PTREG_OUT(regs, stkadj, stkadj),
+#if 0
+/* Are these registers that must be saved? */
+ PTREG_OUT(regs, format, format),
+ PTREG_OUT(regs, vector, vector),
+#endif
+ PTREG_OUT(regs, sr, sr),
+ PTREG_OUT(regs, pc, pc)
+ :
+ :
+ "a0"
+ );
+
+ return regs;
+}
+
/*
* These are defined as per linux/ptrace.h.
*/
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-04-12 7:59 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-04-12 6:04 [PATCH 11/23] Make register values available to M68K panic notifiers David VomLehn
2010-04-12 7:59 ` Fwd: " Geert Uytterhoeven
2010-04-12 6:06 David VomLehn
2010-04-12 6:06 ` David VomLehn
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.