[U-Boot] U-Boot ARM/PXA maintainership

[U-Boot] U-Boot ARM/PXA maintainership

[Marek Vasut]

Hello,

It seems my patches for the PXA2xx and PXA3xx in U-Boot are ignored. I'd be 
willing to take over PXA maintainance in U-Boot. I already maintain various PXA-
based devices in mainline Linux kernel. I also maintain the OpenPXA project (IPL 
for PXA3xx devices).

Thanks in advance.

[U-Boot] U-Boot ARM/PXA maintainership

[Tom]

Marek Vasut wrote:
> Hello,
> 
> It seems my patches for the PXA2xx and PXA3xx in U-Boot are ignored. I'd be 
> willing to take over PXA maintainance in U-Boot. I already maintain various PXA-
> based devices in mainline Linux kernel. I also maintain the OpenPXA project (IPL 
> for PXA3xx devices).
> 
The correct thing to do is to ping me!
If it looks like your patches are being ignored it is likely an oversight on my 
part.  I will search through what you have posted recently and take care of these.

In the future, please add 'Arm ' to subject line of a patch.
I notice these more than board names.

Sorry,
Tom


> Thanks in advance.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [ARM] U-Boot ARM/PXA maintainership

[Marek Vasut]

Dne Ne 11. dubna 2010 22:53:44 Tom napsal(a):
> Marek Vasut wrote:
> > Hello,

Hi
> > 
> > It seems my patches for the PXA2xx and PXA3xx in U-Boot are ignored. I'd
> > be willing to take over PXA maintainance in U-Boot. I already maintain
> > various PXA- based devices in mainline Linux kernel. I also maintain the
> > OpenPXA project (IPL for PXA3xx devices).
> 
> The correct thing to do is to ping me!

Fine, good to know, thanks.
> If it looks like your patches are being ignored it is likely an oversight
> on my part.  I will search through what you have posted recently and take
> care of these.

Look for:
[PATCH] PXA: Align stack to 8 bytes
[PATCH] PXAMMC: Drop different delays for PXA27X
[PATCH 1/2] Enable PXAFB for PXA27X and PXA3XX
[PATCH 2/2] PXAMCI Monahans support

Or I can just resend you the whole patchset. There are more patches for PXA in 
my tree, that's why I'd like to take over that bit (PXA of course, not the whole 
ARM tree!).
> 
> In the future, please add 'Arm ' to subject line of a patch.
> I notice these more than board names.

Ok
> 
> Sorry,
> Tom

That's fine, thanks.
> 
> > Thanks in advance.
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] U-Boot ARM/PXA maintainership

[Wolfgang Denk]

Dear Marek Vasut,

In message <201004110243.26808.marek.vasut@gmail.com> you wrote:
> 
> It seems my patches for the PXA2xx and PXA3xx in U-Boot are ignored. I'd be 
> willing to take over PXA maintainance in U-Boot. I already maintain various PXA-
> based devices in mainline Linux kernel. I also maintain the OpenPXA project (IPL 
> for PXA3xx devices).

Thanks for volunteering.


Tom, if you (and everybody else) aggree(s) I would like to hand over
the u-boot-pxa repository to Marek.  What do you think?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I'm a soldier, not a diplomat.  I can only tell the truth.
	-- Kirk, "Errand of Mercy", stardate 3198.9

[U-Boot] U-Boot ARM/PXA maintainership

[Tom]

Wolfgang Denk wrote:
> Dear Marek Vasut,
> 
> In message <201004110243.26808.marek.vasut@gmail.com> you wrote:
>> It seems my patches for the PXA2xx and PXA3xx in U-Boot are ignored. I'd be 
>> willing to take over PXA maintainance in U-Boot. I already maintain various PXA-
>> based devices in mainline Linux kernel. I also maintain the OpenPXA project (IPL 
>> for PXA3xx devices).
> 
> Thanks for volunteering.
> 
> 
> Tom, if you (and everybody else) aggree(s) I would like to hand over
> the u-boot-pxa repository to Marek.  What do you think?
> 

That would be fine with me.
Tom

> Best regards,
> 
> Wolfgang Denk
> 

[U-Boot] U-Boot ARM/PXA maintainership

[Wolfgang Denk]

Dear Tom,

In message <4BC5A674.9070900@windriver.com> you wrote:
>
> > Tom, if you (and everybody else) aggree(s) I would like to hand over
> > the u-boot-pxa repository to Marek.  What do you think?
> 
> That would be fine with me.

Thanks.

Marek - the "u-boot-pxa" repository is ready for your use now.

Hm... I would like to keep hierarchy flat, and my impression is that
the PXA activities are pretty much different from Marvell's other
U-Boot related work, so I suggest you send your pull requests directly
to Tom.

Prafulla, is this OK with you?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
One essential to success is that you desire be an all-obsessing  one,
your thoughts and aims be co-ordinated, and your energy be concentra-
ted and applied without letup.

[U-Boot] U-Boot ARM/PXA maintainership

[Marek Vasut]

Dne St 14. dubna 2010 20:26:04 Wolfgang Denk napsal(a):
> Dear Tom,
> 
> In message <4BC5A674.9070900@windriver.com> you wrote:
> > > Tom, if you (and everybody else) aggree(s) I would like to hand over
> > > the u-boot-pxa repository to Marek.  What do you think?
> > 
> > That would be fine with me.
> 
> Thanks.
> 

Hi,

> Marek - the "u-boot-pxa" repository is ready for your use now.

Thanks!
> 
> Hm... I would like to keep hierarchy flat, and my impression is that
> the PXA activities are pretty much different from Marvell's other
> U-Boot related work, so I suggest you send your pull requests directly
> to Tom.
> 
You mean Kirkwood, Orion or Armada (did any patches for this actually hit the 
tree yet)? Yes, those SoCs are different.

> Prafulla, is this OK with you?
> 
> Best regards,
> 
> Wolfgang Denk

[U-Boot] U-Boot ARM/PXA maintainership

[Prafulla Wadaskar]

 

> -----Original Message-----
> From: Marek Vasut [mailto:marek.vasut at gmail.com] 
> Sent: Thursday, April 15, 2010 12:13 AM
> To: Wolfgang Denk
> Cc: Tom; Prafulla Wadaskar; u-boot at lists.denx.de
> Subject: Re: [U-Boot] U-Boot ARM/PXA maintainership
> 
> Dne St 14. dubna 2010 20:26:04 Wolfgang Denk napsal(a):
> > Dear Tom,
> > 
> > In message <4BC5A674.9070900@windriver.com> you wrote:
> > > > Tom, if you (and everybody else) aggree(s) I would like 
> to hand over
> > > > the u-boot-pxa repository to Marek.  What do you think?
> > > 
> > > That would be fine with me.
> > 
> > Thanks.
> > 
> 
> Hi,
> 
> > Marek - the "u-boot-pxa" repository is ready for your use now.
> 
> Thanks!
> > 
> > Hm... I would like to keep hierarchy flat, and my impression is that
> > the PXA activities are pretty much different from Marvell's other
> > U-Boot related work, so I suggest you send your pull 
> requests directly
> > to Tom.
> > 
> You mean Kirkwood, Orion or Armada (did any patches for this 
> actually hit the 
> tree yet)? Yes, those SoCs are different.

Yes, Kirkwood is already mainlined, Orion in progress will be mainlined available soon.
Armada under development.

> 
> > Prafulla, is this OK with you?

Yes, This is okay with me,
I wish good luck for Marek for this activity.

Regards..
Prafulla . .
 

[U-Boot] [ARM] U-Boot ARM/PXA maintainership

[Tom Rix]

Marek Vasut wrote:
> Dne Ne 11. dubna 2010 22:53:44 Tom napsal(a):
>> Marek Vasut wrote:
>>> Hello,
> 
> Hi
>>> It seems my patches for the PXA2xx and PXA3xx in U-Boot are ignored. I'd
>>> be willing to take over PXA maintainance in U-Boot. I already maintain
>>> various PXA- based devices in mainline Linux kernel. I also maintain the
>>> OpenPXA project (IPL for PXA3xx devices).
>> The correct thing to do is to ping me!
> 
> Fine, good to know, thanks.
>> If it looks like your patches are being ignored it is likely an oversight
>> on my part.  I will search through what you have posted recently and take
>> care of these.
> 
> Look for:
> [PATCH] PXA: Align stack to 8 bytes
> [PATCH] PXAMMC: Drop different delays for PXA27X
> [PATCH 1/2] Enable PXAFB for PXA27X and PXA3XX
> [PATCH 2/2] PXAMCI Monahans support
> 
> Or I can just resend you the whole patchset. There are more patches for PXA in 
> my tree, that's why I'd like to take over that bit (PXA of course, not the whole 
> ARM tree!).

I see the first two in the u-boot-pxa tree.
When you are comfortable with the tree, please send me a pull request and
I will merge the commits specified in the request into Arm.

If you want to do this now or after the other two are in is up to you.

Welcome aboard!
Tom

> 

[U-Boot] [ARM] U-Boot ARM/PXA maintainership

[Marek Vasut]

Dne So 17. dubna 2010 23:27:56 Tom Rix napsal(a):
> Marek Vasut wrote:
> > Dne Ne 11. dubna 2010 22:53:44 Tom napsal(a):
> >> Marek Vasut wrote:
> >>> Hello,
> > 
> > Hi
> > 
> >>> It seems my patches for the PXA2xx and PXA3xx in U-Boot are ignored.
> >>> I'd be willing to take over PXA maintainance in U-Boot. I already
> >>> maintain various PXA- based devices in mainline Linux kernel. I also
> >>> maintain the OpenPXA project (IPL for PXA3xx devices).
> >> 
> >> The correct thing to do is to ping me!
> > 
> > Fine, good to know, thanks.
> > 
> >> If it looks like your patches are being ignored it is likely an
> >> oversight on my part.  I will search through what you have posted
> >> recently and take care of these.
> > 
> > Look for:
> > [PATCH] PXA: Align stack to 8 bytes
> > [PATCH] PXAMMC: Drop different delays for PXA27X
> > [PATCH 1/2] Enable PXAFB for PXA27X and PXA3XX
> > [PATCH 2/2] PXAMCI Monahans support
> > 
> > Or I can just resend you the whole patchset. There are more patches for
> > PXA in my tree, that's why I'd like to take over that bit (PXA of
> > course, not the whole ARM tree!).
> 
> I see the first two in the u-boot-pxa tree.
> When you are comfortable with the tree, please send me a pull request and
> I will merge the commits specified in the request into Arm.
> 
> If you want to do this now or after the other two are in is up to you.
> 
> Welcome aboard!
> Tom
Hi,
I see no reply on the PXAMCI one so I'll push that. Also I'll push the delay fix 
for PXAMCI. The PXAFB one will need further rework now that I think of it. I 
also added a few register definitions that were missing and were quite 
important.

I'd like you to pull that now if possible. Thanks!

Also, thanks for welcoming me, happy to be here :)

Cheers!

[U-Boot] [ARM] U-Boot ARM/PXA maintainership

[Tom Rix]

Marek Vasut wrote:
> Dne So 17. dubna 2010 23:27:56 Tom Rix napsal(a):
>> Marek Vasut wrote:
>>> Dne Ne 11. dubna 2010 22:53:44 Tom napsal(a):
>>>> Marek Vasut wrote:
>>>>> Hello,
>>> Hi
>>>
>>>>> It seems my patches for the PXA2xx and PXA3xx in U-Boot are ignored.
>>>>> I'd be willing to take over PXA maintainance in U-Boot. I already
>>>>> maintain various PXA- based devices in mainline Linux kernel. I also
>>>>> maintain the OpenPXA project (IPL for PXA3xx devices).
>>>> The correct thing to do is to ping me!
>>> Fine, good to know, thanks.
>>>
>>>> If it looks like your patches are being ignored it is likely an
>>>> oversight on my part.  I will search through what you have posted
>>>> recently and take care of these.
>>> Look for:
>>> [PATCH] PXA: Align stack to 8 bytes
>>> [PATCH] PXAMMC: Drop different delays for PXA27X
>>> [PATCH 1/2] Enable PXAFB for PXA27X and PXA3XX
>>> [PATCH 2/2] PXAMCI Monahans support
>>>
>>> Or I can just resend you the whole patchset. There are more patches for
>>> PXA in my tree, that's why I'd like to take over that bit (PXA of
>>> course, not the whole ARM tree!).
>> I see the first two in the u-boot-pxa tree.
>> When you are comfortable with the tree, please send me a pull request and
>> I will merge the commits specified in the request into Arm.
>>
>> If you want to do this now or after the other two are in is up to you.
>>
>> Welcome aboard!
>> Tom
> Hi,
> I see no reply on the PXAMCI one so I'll push that. Also I'll push the delay fix 
> for PXAMCI. The PXAFB one will need further rework now that I think of it. I 
> also added a few register definitions that were missing and were quite 
> important.
> 
> I'd like you to pull that now if possible. Thanks!
> 

Please review how other folks ask for pull requests on the list.

You will need to post the output of this git request-pull command to the mailing 
list.

something like

git request-pull 8d321b81c5441db93425ee37cb79cc51d9ce2fb0 
git://git.denx.de/u-boot-pxa/master
fatal: The remote end hung up unexpectedly
warn: No branch of git://git.denx.de/u-boot-pxa/master is at:
warn:   97bc89c: PXA: Add missing MDREFR bits
warn: Are you sure you pushed HEAD there?


The following changes since commit 8d321b81c5441db93425ee37cb79cc51d9ce2fb0:
   Peter Tyser (1):
         Update README to reflect new directory structure

are available in the git repository at:

   git://git.denx.de/u-boot-pxa/master ..BRANCH.NOT.VERIFIED..

--- BRANCH.NOT.VERIFIED is an error..
--- Do not submit a pull request with this message

Marek Vasut (6):
       PXA: Align stack to 8 bytes
       PXA: Fix abort stack
       PXA: Drop different delays in PXAMMC for PXA27X
       PXA: PXAMMC: Add Monahans support
       PXA: Add UP2OCR register bit definitions
       PXA: Add missing MDREFR bits

  arch/arm/cpu/pxa/start.S                 |    5 ++++-
  arch/arm/include/asm/arch-pxa/pxa-regs.h |   23 +++++++++++++++++++----
  drivers/mmc/pxa_mmc.c                    |   17 ++++++-----------
  3 files changed, 29 insertions(+), 16 deletions(-)

 From a really quick review, the last patch

PXA: Add missing MDREFR bits

Has not been posted to the mailing list.
In general it is a requirement that all commits must be posted.

Once you issue a pull request, I can work around new commits
appended to your tree.  Meaning you can add stuff after
the pull request.

Tom

> Also, thanks for welcoming me, happy to be here :)
> 
> Cheers!
> 
> 

[U-Boot] [ARM] U-Boot ARM/PXA maintainership

[Marek Vasut]

Dne Ne 18. dubna 2010 15:21:32 Tom Rix napsal(a):
> Marek Vasut wrote:
> > Dne So 17. dubna 2010 23:27:56 Tom Rix napsal(a):
> >> Marek Vasut wrote:
> >>> Dne Ne 11. dubna 2010 22:53:44 Tom napsal(a):
> >>>> Marek Vasut wrote:
> >>>>> Hello,
> >>> 
> >>> Hi
> >>> 
> >>>>> It seems my patches for the PXA2xx and PXA3xx in U-Boot are ignored.
> >>>>> I'd be willing to take over PXA maintainance in U-Boot. I already
> >>>>> maintain various PXA- based devices in mainline Linux kernel. I also
> >>>>> maintain the OpenPXA project (IPL for PXA3xx devices).
> >>>> 
> >>>> The correct thing to do is to ping me!
> >>> 
> >>> Fine, good to know, thanks.
> >>> 
> >>>> If it looks like your patches are being ignored it is likely an
> >>>> oversight on my part.  I will search through what you have posted
> >>>> recently and take care of these.
> >>> 
> >>> Look for:
> >>> [PATCH] PXA: Align stack to 8 bytes
> >>> [PATCH] PXAMMC: Drop different delays for PXA27X
> >>> [PATCH 1/2] Enable PXAFB for PXA27X and PXA3XX
> >>> [PATCH 2/2] PXAMCI Monahans support
> >>> 
> >>> Or I can just resend you the whole patchset. There are more patches for
> >>> PXA in my tree, that's why I'd like to take over that bit (PXA of
> >>> course, not the whole ARM tree!).
> >> 
> >> I see the first two in the u-boot-pxa tree.
> >> When you are comfortable with the tree, please send me a pull request
> >> and I will merge the commits specified in the request into Arm.
> >> 
> >> If you want to do this now or after the other two are in is up to you.
> >> 
> >> Welcome aboard!
> >> Tom
> > 
> > Hi,
> > I see no reply on the PXAMCI one so I'll push that. Also I'll push the
> > delay fix for PXAMCI. The PXAFB one will need further rework now that I
> > think of it. I also added a few register definitions that were missing
> > and were quite important.
> > 
> > I'd like you to pull that now if possible. Thanks!
> 
> Please review how other folks ask for pull requests on the list.
> 
> You will need to post the output of this git request-pull command to the
> mailing list.
> 
> something like

Yup, will send.
> 
> git request-pull 8d321b81c5441db93425ee37cb79cc51d9ce2fb0
> git://git.denx.de/u-boot-pxa/master
> fatal: The remote end hung up unexpectedly
> warn: No branch of git://git.denx.de/u-boot-pxa/master is at:
> warn:   97bc89c: PXA: Add missing MDREFR bits
> warn: Are you sure you pushed HEAD there?
> 
> 
> The following changes since commit
> 8d321b81c5441db93425ee37cb79cc51d9ce2fb0: Peter Tyser (1):
>          Update README to reflect new directory structure
> 
> are available in the git repository at:
> 
>    git://git.denx.de/u-boot-pxa/master ..BRANCH.NOT.VERIFIED..
> 
> --- BRANCH.NOT.VERIFIED is an error..
> --- Do not submit a pull request with this message

Noticed that, but I'm unsure what I messed up. I'll look into this and send a 
request once fixed.
> 
> Marek Vasut (6):
>        PXA: Align stack to 8 bytes
>        PXA: Fix abort stack
>        PXA: Drop different delays in PXAMMC for PXA27X
>        PXA: PXAMMC: Add Monahans support
>        PXA: Add UP2OCR register bit definitions
>        PXA: Add missing MDREFR bits
> 
>   arch/arm/cpu/pxa/start.S                 |    5 ++++-
>   arch/arm/include/asm/arch-pxa/pxa-regs.h |   23 +++++++++++++++++++----
>   drivers/mmc/pxa_mmc.c                    |   17 ++++++-----------
>   3 files changed, 29 insertions(+), 16 deletions(-)
> 
>  From a really quick review, the last patch
> 
> PXA: Add missing MDREFR bits
> 
> Has not been posted to the mailing list.
> In general it is a requirement that all commits must be posted.

Ok, will git send-email them. Those are quite trivial things so I hope nothing 
much happened.
> 
> Once you issue a pull request, I can work around new commits
> appended to your tree.  Meaning you can add stuff after
> the pull request.

Sure, or I can prepare a branch for you.
> 
> Tom

Cheers
> 
> > Also, thanks for welcoming me, happy to be here :)
> > 
> > Cheers!