* [PATCH 1/4] net/phy/marvell: Expose IDs and flags in a .h and add dns323 LEDs setup flag
@ 2010-06-13 1:10 ` Benjamin Herrenschmidt
0 siblings, 0 replies; 8+ messages in thread
From: Benjamin Herrenschmidt @ 2010-06-13 1:10 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: netdev, Wolfram Sang, Nicolas Pitre, hvr
This moves the various known Marvell PHY IDs to include/linux/marvell_phy.h
along with dev_flags definitions for use by the driver.
I then added a flag that changes the PHY init code to setup the LEDs
config to the values needed to operate a dns323 rev C1 NAS.
I moved the existing "resistance" flag to the .h as well, though I've
been unable to find whoever sets this to convert it to use that constant.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
drivers/net/phy/marvell.c | 38 ++++++++++++++++++++------------------
include/linux/marvell_phy.h | 20 ++++++++++++++++++++
2 files changed, 40 insertions(+), 18 deletions(-)
create mode 100644 include/linux/marvell_phy.h
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 78b74e8..5a1bd5d 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -29,6 +29,7 @@
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
+#include <linux/marvell_phy.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -48,8 +49,6 @@
#define MII_M1145_RGMII_RX_DELAY 0x0080
#define MII_M1145_RGMII_TX_DELAY 0x0002
-#define M1145_DEV_FLAGS_RESISTANCE 0x00000001
-
#define MII_M1111_PHY_LED_CONTROL 0x18
#define MII_M1111_PHY_LED_DIRECT 0x4100
#define MII_M1111_PHY_LED_COMBINE 0x411c
@@ -350,7 +349,10 @@ static int m88e1118_config_init(struct phy_device *phydev)
return err;
/* Adjust LED Control */
- err = phy_write(phydev, 0x10, 0x021e);
+ if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS)
+ err = phy_write(phydev, 0x10, 0x1100);
+ else
+ err = phy_write(phydev, 0x10, 0x021e);
if (err < 0)
return err;
@@ -398,7 +400,7 @@ static int m88e1145_config_init(struct phy_device *phydev)
if (err < 0)
return err;
- if (phydev->dev_flags & M1145_DEV_FLAGS_RESISTANCE) {
+ if (phydev->dev_flags & MARVELL_PHY_M1145_FLAGS_RESISTANCE) {
err = phy_write(phydev, 0x1d, 0x0012);
if (err < 0)
return err;
@@ -529,8 +531,8 @@ static int m88e1121_did_interrupt(struct phy_device *phydev)
static struct phy_driver marvell_drivers[] = {
{
- .phy_id = 0x01410c60,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1101,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1101",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
@@ -541,8 +543,8 @@ static struct phy_driver marvell_drivers[] = {
.driver = { .owner = THIS_MODULE },
},
{
- .phy_id = 0x01410c90,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1112,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1112",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
@@ -554,8 +556,8 @@ static struct phy_driver marvell_drivers[] = {
.driver = { .owner = THIS_MODULE },
},
{
- .phy_id = 0x01410cc0,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1111,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1111",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
@@ -567,8 +569,8 @@ static struct phy_driver marvell_drivers[] = {
.driver = { .owner = THIS_MODULE },
},
{
- .phy_id = 0x01410e10,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1118,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1118",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
@@ -580,8 +582,8 @@ static struct phy_driver marvell_drivers[] = {
.driver = {.owner = THIS_MODULE,},
},
{
- .phy_id = 0x01410cb0,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1121R,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1121R",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
@@ -593,8 +595,8 @@ static struct phy_driver marvell_drivers[] = {
.driver = { .owner = THIS_MODULE },
},
{
- .phy_id = 0x01410cd0,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1145,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1145",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
@@ -606,8 +608,8 @@ static struct phy_driver marvell_drivers[] = {
.driver = { .owner = THIS_MODULE },
},
{
- .phy_id = 0x01410e30,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1240,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1240",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
new file mode 100644
index 0000000..2ed4fb8
--- /dev/null
+++ b/include/linux/marvell_phy.h
@@ -0,0 +1,20 @@
+#ifndef _MARVELL_PHY_H
+#define _MARVELL_PHY_H
+
+/* Mask used for ID comparisons */
+#define MARVELL_PHY_ID_MASK 0xfffffff0
+
+/* Known PHY IDs */
+#define MARVELL_PHY_ID_88E1101 0x01410c60
+#define MARVELL_PHY_ID_88E1112 0x01410c90
+#define MARVELL_PHY_ID_88E1111 0x01410cc0
+#define MARVELL_PHY_ID_88E1118 0x01410e10
+#define MARVELL_PHY_ID_88E1121R 0x01410cb0
+#define MARVELL_PHY_ID_88E1145 0x01410cd0
+#define MARVELL_PHY_ID_88E1240 0x01410e30
+
+/* struct phy_device dev_flags definitions */
+#define MARVELL_PHY_M1145_FLAGS_RESISTANCE 0x00000001
+#define MARVELL_PHY_M1118_DNS323_LEDS 0x00000002
+
+#endif /* _MARVELL_PHY_H */
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 1/4] net/phy/marvell: Expose IDs and flags in a .h and add dns323 LEDs setup flag
@ 2010-06-13 1:10 ` Benjamin Herrenschmidt
0 siblings, 0 replies; 8+ messages in thread
From: Benjamin Herrenschmidt @ 2010-06-13 1:10 UTC (permalink / raw)
To: linux-arm-kernel
This moves the various known Marvell PHY IDs to include/linux/marvell_phy.h
along with dev_flags definitions for use by the driver.
I then added a flag that changes the PHY init code to setup the LEDs
config to the values needed to operate a dns323 rev C1 NAS.
I moved the existing "resistance" flag to the .h as well, though I've
been unable to find whoever sets this to convert it to use that constant.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
drivers/net/phy/marvell.c | 38 ++++++++++++++++++++------------------
include/linux/marvell_phy.h | 20 ++++++++++++++++++++
2 files changed, 40 insertions(+), 18 deletions(-)
create mode 100644 include/linux/marvell_phy.h
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 78b74e8..5a1bd5d 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -29,6 +29,7 @@
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
+#include <linux/marvell_phy.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -48,8 +49,6 @@
#define MII_M1145_RGMII_RX_DELAY 0x0080
#define MII_M1145_RGMII_TX_DELAY 0x0002
-#define M1145_DEV_FLAGS_RESISTANCE 0x00000001
-
#define MII_M1111_PHY_LED_CONTROL 0x18
#define MII_M1111_PHY_LED_DIRECT 0x4100
#define MII_M1111_PHY_LED_COMBINE 0x411c
@@ -350,7 +349,10 @@ static int m88e1118_config_init(struct phy_device *phydev)
return err;
/* Adjust LED Control */
- err = phy_write(phydev, 0x10, 0x021e);
+ if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS)
+ err = phy_write(phydev, 0x10, 0x1100);
+ else
+ err = phy_write(phydev, 0x10, 0x021e);
if (err < 0)
return err;
@@ -398,7 +400,7 @@ static int m88e1145_config_init(struct phy_device *phydev)
if (err < 0)
return err;
- if (phydev->dev_flags & M1145_DEV_FLAGS_RESISTANCE) {
+ if (phydev->dev_flags & MARVELL_PHY_M1145_FLAGS_RESISTANCE) {
err = phy_write(phydev, 0x1d, 0x0012);
if (err < 0)
return err;
@@ -529,8 +531,8 @@ static int m88e1121_did_interrupt(struct phy_device *phydev)
static struct phy_driver marvell_drivers[] = {
{
- .phy_id = 0x01410c60,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1101,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1101",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
@@ -541,8 +543,8 @@ static struct phy_driver marvell_drivers[] = {
.driver = { .owner = THIS_MODULE },
},
{
- .phy_id = 0x01410c90,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1112,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1112",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
@@ -554,8 +556,8 @@ static struct phy_driver marvell_drivers[] = {
.driver = { .owner = THIS_MODULE },
},
{
- .phy_id = 0x01410cc0,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1111,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1111",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
@@ -567,8 +569,8 @@ static struct phy_driver marvell_drivers[] = {
.driver = { .owner = THIS_MODULE },
},
{
- .phy_id = 0x01410e10,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1118,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1118",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
@@ -580,8 +582,8 @@ static struct phy_driver marvell_drivers[] = {
.driver = {.owner = THIS_MODULE,},
},
{
- .phy_id = 0x01410cb0,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1121R,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1121R",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
@@ -593,8 +595,8 @@ static struct phy_driver marvell_drivers[] = {
.driver = { .owner = THIS_MODULE },
},
{
- .phy_id = 0x01410cd0,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1145,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1145",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
@@ -606,8 +608,8 @@ static struct phy_driver marvell_drivers[] = {
.driver = { .owner = THIS_MODULE },
},
{
- .phy_id = 0x01410e30,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1240,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1240",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
new file mode 100644
index 0000000..2ed4fb8
--- /dev/null
+++ b/include/linux/marvell_phy.h
@@ -0,0 +1,20 @@
+#ifndef _MARVELL_PHY_H
+#define _MARVELL_PHY_H
+
+/* Mask used for ID comparisons */
+#define MARVELL_PHY_ID_MASK 0xfffffff0
+
+/* Known PHY IDs */
+#define MARVELL_PHY_ID_88E1101 0x01410c60
+#define MARVELL_PHY_ID_88E1112 0x01410c90
+#define MARVELL_PHY_ID_88E1111 0x01410cc0
+#define MARVELL_PHY_ID_88E1118 0x01410e10
+#define MARVELL_PHY_ID_88E1121R 0x01410cb0
+#define MARVELL_PHY_ID_88E1145 0x01410cd0
+#define MARVELL_PHY_ID_88E1240 0x01410e30
+
+/* struct phy_device dev_flags definitions */
+#define MARVELL_PHY_M1145_FLAGS_RESISTANCE 0x00000001
+#define MARVELL_PHY_M1118_DNS323_LEDS 0x00000002
+
+#endif /* _MARVELL_PHY_H */
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/4] net/phy/marvell: Expose IDs and flags in a .h and add dns323 LEDs setup flag
2010-06-13 1:10 ` Benjamin Herrenschmidt
@ 2010-06-13 5:28 ` Wolfram Sang
-1 siblings, 0 replies; 8+ messages in thread
From: Wolfram Sang @ 2010-06-13 5:28 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linux-arm-kernel, netdev, Nicolas Pitre, hvr
[-- Attachment #1: Type: text/plain, Size: 815 bytes --]
On Sun, Jun 13, 2010 at 11:10:23AM +1000, Benjamin Herrenschmidt wrote:
> This moves the various known Marvell PHY IDs to include/linux/marvell_phy.h
> along with dev_flags definitions for use by the driver.
>
> I then added a flag that changes the PHY init code to setup the LEDs
> config to the values needed to operate a dns323 rev C1 NAS.
>
> I moved the existing "resistance" flag to the .h as well, though I've
> been unable to find whoever sets this to convert it to use that constant.
>
> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
That should do for now.
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/4] net/phy/marvell: Expose IDs and flags in a .h and add dns323 LEDs setup flag
@ 2010-06-13 5:28 ` Wolfram Sang
0 siblings, 0 replies; 8+ messages in thread
From: Wolfram Sang @ 2010-06-13 5:28 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, Jun 13, 2010 at 11:10:23AM +1000, Benjamin Herrenschmidt wrote:
> This moves the various known Marvell PHY IDs to include/linux/marvell_phy.h
> along with dev_flags definitions for use by the driver.
>
> I then added a flag that changes the PHY init code to setup the LEDs
> config to the values needed to operate a dns323 rev C1 NAS.
>
> I moved the existing "resistance" flag to the .h as well, though I've
> been unable to find whoever sets this to convert it to use that constant.
>
> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
That should do for now.
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100613/8be21569/attachment.sig>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/4] net/phy/marvell: Expose IDs and flags in a .h and add dns323 LEDs setup flag
2010-06-13 5:28 ` Wolfram Sang
@ 2010-06-13 6:02 ` Benjamin Herrenschmidt
-1 siblings, 0 replies; 8+ messages in thread
From: Benjamin Herrenschmidt @ 2010-06-13 6:02 UTC (permalink / raw)
To: Wolfram Sang; +Cc: netdev, hvr, linux-arm-kernel, Nicolas Pitre, David Miller
On Sun, 2010-06-13 at 07:28 +0200, Wolfram Sang wrote:
> On Sun, Jun 13, 2010 at 11:10:23AM +1000, Benjamin Herrenschmidt wrote:
> > This moves the various known Marvell PHY IDs to include/linux/marvell_phy.h
> > along with dev_flags definitions for use by the driver.
> >
> > I then added a flag that changes the PHY init code to setup the LEDs
> > config to the values needed to operate a dns323 rev C1 NAS.
> >
> > I moved the existing "resistance" flag to the .h as well, though I've
> > been unable to find whoever sets this to convert it to use that constant.
> >
> > Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>
> That should do for now.
>
> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Thanks.
Dave, any objection to having that go via the arm tree along with the
rest of my patches to support the dns323 since they depend on this one ?
Cheers,
Ben.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/4] net/phy/marvell: Expose IDs and flags in a .h and add dns323 LEDs setup flag
@ 2010-06-13 6:02 ` Benjamin Herrenschmidt
0 siblings, 0 replies; 8+ messages in thread
From: Benjamin Herrenschmidt @ 2010-06-13 6:02 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, 2010-06-13 at 07:28 +0200, Wolfram Sang wrote:
> On Sun, Jun 13, 2010 at 11:10:23AM +1000, Benjamin Herrenschmidt wrote:
> > This moves the various known Marvell PHY IDs to include/linux/marvell_phy.h
> > along with dev_flags definitions for use by the driver.
> >
> > I then added a flag that changes the PHY init code to setup the LEDs
> > config to the values needed to operate a dns323 rev C1 NAS.
> >
> > I moved the existing "resistance" flag to the .h as well, though I've
> > been unable to find whoever sets this to convert it to use that constant.
> >
> > Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>
> That should do for now.
>
> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Thanks.
Dave, any objection to having that go via the arm tree along with the
rest of my patches to support the dns323 since they depend on this one ?
Cheers,
Ben.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/4] net/phy/marvell: Expose IDs and flags in a .h and add dns323 LEDs setup flag
2010-06-13 6:02 ` Benjamin Herrenschmidt
@ 2010-06-14 16:13 ` David Miller
-1 siblings, 0 replies; 8+ messages in thread
From: David Miller @ 2010-06-14 16:13 UTC (permalink / raw)
To: benh; +Cc: w.sang, netdev, hvr, linux-arm-kernel, nico
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Sun, 13 Jun 2010 16:02:35 +1000
> On Sun, 2010-06-13 at 07:28 +0200, Wolfram Sang wrote:
>> On Sun, Jun 13, 2010 at 11:10:23AM +1000, Benjamin Herrenschmidt wrote:
>> > This moves the various known Marvell PHY IDs to include/linux/marvell_phy.h
>> > along with dev_flags definitions for use by the driver.
>> >
>> > I then added a flag that changes the PHY init code to setup the LEDs
>> > config to the values needed to operate a dns323 rev C1 NAS.
>> >
>> > I moved the existing "resistance" flag to the .h as well, though I've
>> > been unable to find whoever sets this to convert it to use that constant.
>> >
>> > Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>>
>> That should do for now.
>>
>> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
>
> Thanks.
>
> Dave, any objection to having that go via the arm tree along with the
> rest of my patches to support the dns323 since they depend on this one ?
No problem:
Acked-by: David S. Miller <davem@davemloft.net>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/4] net/phy/marvell: Expose IDs and flags in a .h and add dns323 LEDs setup flag
@ 2010-06-14 16:13 ` David Miller
0 siblings, 0 replies; 8+ messages in thread
From: David Miller @ 2010-06-14 16:13 UTC (permalink / raw)
To: linux-arm-kernel
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Sun, 13 Jun 2010 16:02:35 +1000
> On Sun, 2010-06-13 at 07:28 +0200, Wolfram Sang wrote:
>> On Sun, Jun 13, 2010 at 11:10:23AM +1000, Benjamin Herrenschmidt wrote:
>> > This moves the various known Marvell PHY IDs to include/linux/marvell_phy.h
>> > along with dev_flags definitions for use by the driver.
>> >
>> > I then added a flag that changes the PHY init code to setup the LEDs
>> > config to the values needed to operate a dns323 rev C1 NAS.
>> >
>> > I moved the existing "resistance" flag to the .h as well, though I've
>> > been unable to find whoever sets this to convert it to use that constant.
>> >
>> > Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>>
>> That should do for now.
>>
>> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
>
> Thanks.
>
> Dave, any objection to having that go via the arm tree along with the
> rest of my patches to support the dns323 since they depend on this one ?
No problem:
Acked-by: David S. Miller <davem@davemloft.net>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2010-06-14 16:13 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-06-13 1:10 [PATCH 1/4] net/phy/marvell: Expose IDs and flags in a .h and add dns323 LEDs setup flag Benjamin Herrenschmidt
2010-06-13 1:10 ` Benjamin Herrenschmidt
2010-06-13 5:28 ` Wolfram Sang
2010-06-13 5:28 ` Wolfram Sang
2010-06-13 6:02 ` Benjamin Herrenschmidt
2010-06-13 6:02 ` Benjamin Herrenschmidt
2010-06-14 16:13 ` David Miller
2010-06-14 16:13 ` David Miller
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.