* [PATCH 01/17] rt2x00: Limit txpower by eeprom values
@ 2010-07-11 10:23 Ivo van Doorn
2010-07-11 10:23 ` [PATCH 02/17] rt2x00: Convert AGC value from descriptor to RSSI (dBm) Ivo van Doorn
0 siblings, 1 reply; 17+ messages in thread
From: Ivo van Doorn @ 2010-07-11 10:23 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, users, Helmut Schaa
From: Helmut Schaa <helmut.schaa@googlemail.com>
Limit the txpower per rate by the approriate values in the eeprom.
This avoids too high txpower values resulting in bad tx performance.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800.h | 20 ++++-
drivers/net/wireless/rt2x00/rt2800lib.c | 153 ++++++++++++++++++++-----------
2 files changed, 120 insertions(+), 53 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 3ed87ba..3cda229 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -803,6 +803,18 @@
#define EDCA_TID_AC_MAP 0x1310
/*
+ * TX_PWR_CFG:
+ */
+#define TX_PWR_CFG_RATE0 FIELD32(0x0000000f)
+#define TX_PWR_CFG_RATE1 FIELD32(0x000000f0)
+#define TX_PWR_CFG_RATE2 FIELD32(0x00000f00)
+#define TX_PWR_CFG_RATE3 FIELD32(0x0000f000)
+#define TX_PWR_CFG_RATE4 FIELD32(0x000f0000)
+#define TX_PWR_CFG_RATE5 FIELD32(0x00f00000)
+#define TX_PWR_CFG_RATE6 FIELD32(0x0f000000)
+#define TX_PWR_CFG_RATE7 FIELD32(0xf0000000)
+
+/*
* TX_PWR_CFG_0:
*/
#define TX_PWR_CFG_0 0x1314
@@ -1853,9 +1865,15 @@ struct mac_iveiv_entry {
#define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
/*
- * EEPROM TXpower byrate: 20MHZ power
+ * EEPROM TXPOWER by rate: tx power per tx rate for HT20 mode
*/
#define EEPROM_TXPOWER_BYRATE 0x006f
+#define EEPROM_TXPOWER_BYRATE_SIZE 9
+
+#define EEPROM_TXPOWER_BYRATE_RATE0 FIELD16(0x000f)
+#define EEPROM_TXPOWER_BYRATE_RATE1 FIELD16(0x00f0)
+#define EEPROM_TXPOWER_BYRATE_RATE2 FIELD16(0x0f00)
+#define EEPROM_TXPOWER_BYRATE_RATE3 FIELD16(0xf000)
/*
* EEPROM BBP.
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index d3cf0cc..9030eef 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1086,66 +1086,115 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
}
static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
- const int txpower)
+ const int max_txpower)
{
+ u8 txpower;
+ u8 max_value = (u8)max_txpower;
+ u16 eeprom;
+ int i;
u32 reg;
- u32 value = TXPOWER_G_TO_DEV(txpower);
u8 r1;
+ u32 offset;
+ /*
+ * set to normal tx power mode: +/- 0dBm
+ */
rt2800_bbp_read(rt2x00dev, 1, &r1);
rt2x00_set_field8(&r1, BBP1_TX_POWER, 0);
rt2800_bbp_write(rt2x00dev, 1, r1);
- rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, ®);
- rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value);
- rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
-
- rt2800_register_read(rt2x00dev, TX_PWR_CFG_1, ®);
- rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value);
- rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value);
- rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value);
- rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value);
- rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
-
- rt2800_register_read(rt2x00dev, TX_PWR_CFG_2, ®);
- rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value);
- rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value);
- rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value);
- rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value);
- rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value);
- rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value);
- rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value);
- rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value);
- rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
-
- rt2800_register_read(rt2x00dev, TX_PWR_CFG_3, ®);
- rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value);
- rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value);
- rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value);
- rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value);
- rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value);
- rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value);
- rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value);
- rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value);
- rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
-
- rt2800_register_read(rt2x00dev, TX_PWR_CFG_4, ®);
- rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value);
- rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value);
- rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value);
- rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value);
- rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
+ /*
+ * The eeprom contains the tx power values for each rate. These
+ * values map to 100% tx power. Each 16bit word contains four tx
+ * power values and the order is the same as used in the TX_PWR_CFG
+ * registers.
+ */
+ offset = TX_PWR_CFG_0;
+
+ for (i = 0; i < EEPROM_TXPOWER_BYRATE_SIZE; i += 2) {
+ /* just to be safe */
+ if (offset > TX_PWR_CFG_4)
+ break;
+
+ rt2800_register_read(rt2x00dev, offset, ®);
+
+ /* read the next four txpower values */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TXPOWER_BYRATE + i,
+ &eeprom);
+
+ /* TX_PWR_CFG_0: 1MBS, TX_PWR_CFG_1: 24MBS,
+ * TX_PWR_CFG_2: MCS4, TX_PWR_CFG_3: MCS12,
+ * TX_PWR_CFG_4: unknown */
+ txpower = rt2x00_get_field16(eeprom,
+ EEPROM_TXPOWER_BYRATE_RATE0);
+ rt2x00_set_field32(®, TX_PWR_CFG_RATE0,
+ min(txpower, max_value));
+
+ /* TX_PWR_CFG_0: 2MBS, TX_PWR_CFG_1: 36MBS,
+ * TX_PWR_CFG_2: MCS5, TX_PWR_CFG_3: MCS13,
+ * TX_PWR_CFG_4: unknown */
+ txpower = rt2x00_get_field16(eeprom,
+ EEPROM_TXPOWER_BYRATE_RATE1);
+ rt2x00_set_field32(®, TX_PWR_CFG_RATE1,
+ min(txpower, max_value));
+
+ /* TX_PWR_CFG_0: 55MBS, TX_PWR_CFG_1: 48MBS,
+ * TX_PWR_CFG_2: MCS6, TX_PWR_CFG_3: MCS14,
+ * TX_PWR_CFG_4: unknown */
+ txpower = rt2x00_get_field16(eeprom,
+ EEPROM_TXPOWER_BYRATE_RATE2);
+ rt2x00_set_field32(®, TX_PWR_CFG_RATE2,
+ min(txpower, max_value));
+
+ /* TX_PWR_CFG_0: 11MBS, TX_PWR_CFG_1: 54MBS,
+ * TX_PWR_CFG_2: MCS7, TX_PWR_CFG_3: MCS15,
+ * TX_PWR_CFG_4: unknown */
+ txpower = rt2x00_get_field16(eeprom,
+ EEPROM_TXPOWER_BYRATE_RATE3);
+ rt2x00_set_field32(®, TX_PWR_CFG_RATE3,
+ min(txpower, max_value));
+
+ /* read the next four txpower values */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TXPOWER_BYRATE + i + 1,
+ &eeprom);
+
+ /* TX_PWR_CFG_0: 6MBS, TX_PWR_CFG_1: MCS0,
+ * TX_PWR_CFG_2: MCS8, TX_PWR_CFG_3: unknown,
+ * TX_PWR_CFG_4: unknown */
+ txpower = rt2x00_get_field16(eeprom,
+ EEPROM_TXPOWER_BYRATE_RATE0);
+ rt2x00_set_field32(®, TX_PWR_CFG_RATE4,
+ min(txpower, max_value));
+
+ /* TX_PWR_CFG_0: 9MBS, TX_PWR_CFG_1: MCS1,
+ * TX_PWR_CFG_2: MCS9, TX_PWR_CFG_3: unknown,
+ * TX_PWR_CFG_4: unknown */
+ txpower = rt2x00_get_field16(eeprom,
+ EEPROM_TXPOWER_BYRATE_RATE1);
+ rt2x00_set_field32(®, TX_PWR_CFG_RATE5,
+ min(txpower, max_value));
+
+ /* TX_PWR_CFG_0: 12MBS, TX_PWR_CFG_1: MCS2,
+ * TX_PWR_CFG_2: MCS10, TX_PWR_CFG_3: unknown,
+ * TX_PWR_CFG_4: unknown */
+ txpower = rt2x00_get_field16(eeprom,
+ EEPROM_TXPOWER_BYRATE_RATE2);
+ rt2x00_set_field32(®, TX_PWR_CFG_RATE6,
+ min(txpower, max_value));
+
+ /* TX_PWR_CFG_0: 18MBS, TX_PWR_CFG_1: MCS3,
+ * TX_PWR_CFG_2: MCS11, TX_PWR_CFG_3: unknown,
+ * TX_PWR_CFG_4: unknown */
+ txpower = rt2x00_get_field16(eeprom,
+ EEPROM_TXPOWER_BYRATE_RATE3);
+ rt2x00_set_field32(®, TX_PWR_CFG_RATE7,
+ min(txpower, max_value));
+
+ rt2800_register_write(rt2x00dev, offset, reg);
+
+ /* next TX_PWR_CFG register */
+ offset += 4;
+ }
}
static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev,
--
1.7.1.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 02/17] rt2x00: Convert AGC value from descriptor to RSSI (dBm)
2010-07-11 10:23 [PATCH 01/17] rt2x00: Limit txpower by eeprom values Ivo van Doorn
@ 2010-07-11 10:23 ` Ivo van Doorn
2010-07-11 10:24 ` [PATCH 03/17] rt2x00: Rename CONFIG_DISABLE_LINK_TUNING Ivo van Doorn
0 siblings, 1 reply; 17+ messages in thread
From: Ivo van Doorn @ 2010-07-11 10:23 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, users, Helmut Schaa
The RSSI values in the RXWI descriptor aren't true RSSI
values. Instead they are more like the AGC values similar
to rt61pci. And as such, it needs the same conversion
before it can be passed to rt2x00lib/mac80211.
This requires the struct queue_entry to be passed to
rt2800_process_rxwi rather then the skb structure which
is contained in the queue_entry. This is required to
obtain the lna_gain information from the rt2x00_dev structure.
This fixes connection problems when using wpa_supplicant
which would try to connect to the worst AP's rather then the
best ones.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800.h | 2 +-
drivers/net/wireless/rt2x00/rt2800lib.c | 57 +++++++++++++++++++++++++++---
drivers/net/wireless/rt2x00/rt2800lib.h | 2 +-
drivers/net/wireless/rt2x00/rt2800pci.c | 2 +-
drivers/net/wireless/rt2x00/rt2800usb.c | 2 +-
5 files changed, 55 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 3cda229..edd3734 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -74,7 +74,7 @@
* Signal information.
* Default offset is required for RSSI <-> dBm conversion.
*/
-#define DEFAULT_RSSI_OFFSET 120 /* FIXME */
+#define DEFAULT_RSSI_OFFSET 120
/*
* Register layout information.
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 9030eef..255d089 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -325,9 +325,53 @@ void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc)
}
EXPORT_SYMBOL_GPL(rt2800_write_txwi);
-void rt2800_process_rxwi(struct sk_buff *skb, struct rxdone_entry_desc *rxdesc)
+static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxwi_w2)
{
- __le32 *rxwi = (__le32 *) skb->data;
+ int rssi0 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI0);
+ int rssi1 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI1);
+ int rssi2 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI2);
+ u16 eeprom;
+ u8 offset0;
+ u8 offset1;
+ u8 offset2;
+
+ if (rt2x00dev->rx_status.band == IEEE80211_BAND_2GHZ) {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &eeprom);
+ offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET0);
+ offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET1);
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
+ offset2 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_OFFSET2);
+ } else {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &eeprom);
+ offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A_OFFSET0);
+ offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A_OFFSET1);
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
+ offset2 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_OFFSET2);
+ }
+
+ /*
+ * Convert the value from the descriptor into the RSSI value
+ * If the value in the descriptor is 0, it is considered invalid
+ * and the default (extremely low) rssi value is assumed
+ */
+ rssi0 = (rssi0) ? (-12 - offset0 - rt2x00dev->lna_gain - rssi0) : -128;
+ rssi1 = (rssi1) ? (-12 - offset1 - rt2x00dev->lna_gain - rssi1) : -128;
+ rssi2 = (rssi2) ? (-12 - offset2 - rt2x00dev->lna_gain - rssi2) : -128;
+
+ /*
+ * mac80211 only accepts a single RSSI value. Calculating the
+ * average doesn't deliver a fair answer either since -60:-60 would
+ * be considered equally good as -50:-70 while the second is the one
+ * which gives less energy...
+ */
+ rssi0 = max(rssi0, rssi1);
+ return max(rssi0, rssi2);
+}
+
+void rt2800_process_rxwi(struct queue_entry *entry,
+ struct rxdone_entry_desc *rxdesc)
+{
+ __le32 *rxwi = (__le32 *) entry->skb->data;
u32 word;
rt2x00_desc_read(rxwi, 0, &word);
@@ -358,14 +402,15 @@ void rt2800_process_rxwi(struct sk_buff *skb, struct rxdone_entry_desc *rxdesc)
rt2x00_desc_read(rxwi, 2, &word);
- rxdesc->rssi =
- (rt2x00_get_field32(word, RXWI_W2_RSSI0) +
- rt2x00_get_field32(word, RXWI_W2_RSSI1)) / 2;
+ /*
+ * Convert descriptor AGC value to RSSI value.
+ */
+ rxdesc->rssi = rt2800_agc_to_rssi(entry->queue->rt2x00dev, word);
/*
* Remove RXWI descriptor from start of buffer.
*/
- skb_pull(skb, RXWI_DESC_SIZE);
+ skb_pull(entry->skb, RXWI_DESC_SIZE);
}
EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 8313dbf..eb3a4f5 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -121,7 +121,7 @@ void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
const u8 arg0, const u8 arg1);
void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc);
-void rt2800_process_rxwi(struct sk_buff *skb, struct rxdone_entry_desc *txdesc);
+void rt2800_process_rxwi(struct queue_entry *entry, struct rxdone_entry_desc *txdesc);
void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 6f11760..faf71e2 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -805,7 +805,7 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry,
/*
* Process the RXWI structure that is at the start of the buffer.
*/
- rt2800_process_rxwi(entry->skb, rxdesc);
+ rt2800_process_rxwi(entry, rxdesc);
/*
* Set RX IDX in register to inform hardware that we have handled
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 4f85f7b..f2cd37e 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -563,7 +563,7 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
/*
* Process the RXWI structure.
*/
- rt2800_process_rxwi(entry->skb, rxdesc);
+ rt2800_process_rxwi(entry, rxdesc);
}
/*
--
1.7.1.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 03/17] rt2x00: Rename CONFIG_DISABLE_LINK_TUNING
2010-07-11 10:23 ` [PATCH 02/17] rt2x00: Convert AGC value from descriptor to RSSI (dBm) Ivo van Doorn
@ 2010-07-11 10:24 ` Ivo van Doorn
2010-07-11 10:24 ` [PATCH 04/17] rt2x00: Disable link tuning while scanning Ivo van Doorn
0 siblings, 1 reply; 17+ messages in thread
From: Ivo van Doorn @ 2010-07-11 10:24 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, users, Helmut Schaa
Rename CONFIG_DISABLE_LINK_TUNING to DRIVER_SUPPORT_LINK_TUNING
Link tuning support is not only based on EEPROM decisions, but
also if the device actually supports it.
Currently only rt2500usb doesn't support link tuning because
of hardware problems. But rt2800usb is also suspected of having
problems with link tuning.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 4 ++--
drivers/net/wireless/rt2x00/rt2500pci.c | 5 ++---
drivers/net/wireless/rt2x00/rt2500usb.c | 8 --------
drivers/net/wireless/rt2x00/rt2800pci.c | 1 +
drivers/net/wireless/rt2x00/rt2800usb.c | 1 +
drivers/net/wireless/rt2x00/rt2x00.h | 2 +-
drivers/net/wireless/rt2x00/rt2x00link.c | 7 ++++---
drivers/net/wireless/rt2x00/rt61pci.c | 1 +
drivers/net/wireless/rt2x00/rt73usb.c | 1 +
9 files changed, 13 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 3bedf56..5d5047f 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1399,8 +1399,8 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Check if the BBP tuning should be enabled.
*/
- if (!rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_AGCVGC_TUNING))
- __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_AGCVGC_TUNING))
+ __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
return 0;
}
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 69d231d..1d4758a 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1557,9 +1557,8 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
* Check if the BBP tuning should be enabled.
*/
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
-
- if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
- __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
+ if (!rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
+ __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
/*
* Read the RSSI <-> dBm offset information.
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 4420552..6e48a15 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1471,13 +1471,6 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
/*
- * Check if the BBP tuning should be disabled.
- */
- rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
- if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
- __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
-
- /*
* Read the RSSI <-> dBm offset information.
*/
rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
@@ -1743,7 +1736,6 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_COPY_IV, &rt2x00dev->flags);
}
- __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
/*
* Set the rssi offset.
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index faf71e2..a9eca99 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1037,6 +1037,7 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
__set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
if (!modparam_nohwcrypt)
__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+ __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
/*
* Set the rssi offset.
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index f2cd37e..e4ab4db 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -632,6 +632,7 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
__set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
if (!modparam_nohwcrypt)
__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+ __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
/*
* Set the rssi offset.
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 788b0e4..42f4661 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -646,6 +646,7 @@ enum rt2x00_flags {
CONFIG_SUPPORT_HW_CRYPTO,
DRIVER_SUPPORT_CONTROL_FILTERS,
DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL,
+ DRIVER_SUPPORT_LINK_TUNING,
/*
* Driver configuration
@@ -655,7 +656,6 @@ enum rt2x00_flags {
CONFIG_EXTERNAL_LNA_A,
CONFIG_EXTERNAL_LNA_BG,
CONFIG_DOUBLE_ANTENNA,
- CONFIG_DISABLE_LINK_TUNING,
CONFIG_CHANNEL_HT40,
};
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index 2f8136c..801925b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -359,10 +359,11 @@ static void rt2x00link_tuner(struct work_struct *work)
qual->rssi = link->avg_rssi.avg;
/*
- * Only perform the link tuning when Link tuning
- * has been enabled (This could have been disabled from the EEPROM).
+ * Check if link tuning is supported by the hardware, some hardware
+ * do not support link tuning at all, while other devices can disable
+ * the feature from the EEPROM.
*/
- if (!test_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags))
+ if (test_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags))
rt2x00dev->ops->lib->link_tuner(rt2x00dev, qual, link->count);
/*
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 0123fbc..ee84536 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2690,6 +2690,7 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
if (!modparam_nohwcrypt)
__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+ __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
/*
* Set the rssi offset.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 286dd97..156f5d3 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2135,6 +2135,7 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
if (!modparam_nohwcrypt)
__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+ __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
/*
* Set the rssi offset.
--
1.7.1.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 04/17] rt2x00: Disable link tuning while scanning
2010-07-11 10:24 ` [PATCH 03/17] rt2x00: Rename CONFIG_DISABLE_LINK_TUNING Ivo van Doorn
@ 2010-07-11 10:24 ` Ivo van Doorn
2010-07-11 10:25 ` [PATCH 05/17] rt2x00: Fix vgc_level_reg handling Ivo van Doorn
0 siblings, 1 reply; 17+ messages in thread
From: Ivo van Doorn @ 2010-07-11 10:24 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, users, Helmut Schaa
While scanning the link tuner must be disabled. Otherwise
it will interfere with receiving all beacons for each channel
due to changing sensitivity levels.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 2 ++
drivers/net/wireless/rt2x00/rt2500pci.c | 2 ++
drivers/net/wireless/rt2x00/rt2500usb.c | 2 ++
drivers/net/wireless/rt2x00/rt2800lib.c | 2 ++
drivers/net/wireless/rt2x00/rt2x00.h | 3 +++
drivers/net/wireless/rt2x00/rt2x00link.c | 12 +++++++++++-
drivers/net/wireless/rt2x00/rt2x00mac.c | 24 +++++++++++++++++++++---
drivers/net/wireless/rt2x00/rt61pci.c | 2 ++
drivers/net/wireless/rt2x00/rt73usb.c | 2 ++
9 files changed, 47 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 5d5047f..d5f1fab 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1567,6 +1567,8 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = {
.config = rt2x00mac_config,
.configure_filter = rt2x00mac_configure_filter,
.set_tim = rt2x00mac_set_tim,
+ .sw_scan_start = rt2x00mac_sw_scan_start,
+ .sw_scan_complete = rt2x00mac_sw_scan_complete,
.get_stats = rt2x00mac_get_stats,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt2400pci_conf_tx,
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 1d4758a..096d6db 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1864,6 +1864,8 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
.config = rt2x00mac_config,
.configure_filter = rt2x00mac_configure_filter,
.set_tim = rt2x00mac_set_tim,
+ .sw_scan_start = rt2x00mac_sw_scan_start,
+ .sw_scan_complete = rt2x00mac_sw_scan_complete,
.get_stats = rt2x00mac_get_stats,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt2x00mac_conf_tx,
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 6e48a15..0b7888d 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1755,6 +1755,8 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = {
.configure_filter = rt2x00mac_configure_filter,
.set_tim = rt2x00mac_set_tim,
.set_key = rt2x00mac_set_key,
+ .sw_scan_start = rt2x00mac_sw_scan_start,
+ .sw_scan_complete = rt2x00mac_sw_scan_complete,
.get_stats = rt2x00mac_get_stats,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt2x00mac_conf_tx,
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 255d089..bcf50fc 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2896,6 +2896,8 @@ const struct ieee80211_ops rt2800_mac80211_ops = {
.configure_filter = rt2x00mac_configure_filter,
.set_tim = rt2x00mac_set_tim,
.set_key = rt2x00mac_set_key,
+ .sw_scan_start = rt2x00mac_sw_scan_start,
+ .sw_scan_complete = rt2x00mac_sw_scan_complete,
.get_stats = rt2x00mac_get_stats,
.get_tkip_seq = rt2800_get_tkip_seq,
.set_rts_threshold = rt2800_set_rts_threshold,
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 42f4661..bf5e3f3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -628,6 +628,7 @@ enum rt2x00_flags {
DEVICE_STATE_INITIALIZED,
DEVICE_STATE_STARTED,
DEVICE_STATE_ENABLED_RADIO,
+ DEVICE_STATE_SCANNING,
/*
* Driver requirements
@@ -1081,6 +1082,8 @@ int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
#else
#define rt2x00mac_set_key NULL
#endif /* CONFIG_RT2X00_LIB_CRYPTO */
+void rt2x00mac_sw_scan_start(struct ieee80211_hw *hw);
+void rt2x00mac_sw_scan_complete(struct ieee80211_hw *hw);
int rt2x00mac_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats);
void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index 801925b..14f1d51 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -278,6 +278,15 @@ void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev)
if (!rt2x00dev->intf_sta_count)
return;
+ /**
+ * While scanning, link tuning is disabled. By default
+ * the most sensitive settings will be used to make sure
+ * that all beacons and probe responses will be recieved
+ * during the scan.
+ */
+ if (test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags))
+ return;
+
rt2x00link_reset_tuner(rt2x00dev, false);
if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
@@ -338,7 +347,8 @@ static void rt2x00link_tuner(struct work_struct *work)
* When the radio is shutting down we should
* immediately cease all link tuning.
*/
- if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) ||
+ test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags))
return;
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 3b838c0..bbce496 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -347,9 +347,11 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
/*
* Some configuration parameters (e.g. channel and antenna values) can
* only be set when the radio is enabled, but do require the RX to
- * be off.
+ * be off. During this period we should keep link tuning enabled,
+ * if for any reason the link tuner must be reset, this will be
+ * handled by rt2x00lib_config().
*/
- rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
+ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK);
/*
* When we've just turned on the radio, we want to reprogram
@@ -367,7 +369,7 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
rt2x00lib_config_antenna(rt2x00dev, rt2x00dev->default_ant);
/* Turn RX back on */
- rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK);
return 0;
}
@@ -540,6 +542,22 @@ int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
EXPORT_SYMBOL_GPL(rt2x00mac_set_key);
#endif /* CONFIG_RT2X00_LIB_CRYPTO */
+void rt2x00mac_sw_scan_start(struct ieee80211_hw *hw)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ __set_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags);
+ rt2x00link_stop_tuner(rt2x00dev);
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_sw_scan_start);
+
+void rt2x00mac_sw_scan_complete(struct ieee80211_hw *hw)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ __clear_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags);
+ rt2x00link_start_tuner(rt2x00dev);
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_sw_scan_complete);
+
int rt2x00mac_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats)
{
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index ee84536..fe7bce7 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2784,6 +2784,8 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
.configure_filter = rt2x00mac_configure_filter,
.set_tim = rt2x00mac_set_tim,
.set_key = rt2x00mac_set_key,
+ .sw_scan_start = rt2x00mac_sw_scan_start,
+ .sw_scan_complete = rt2x00mac_sw_scan_complete,
.get_stats = rt2x00mac_get_stats,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt61pci_conf_tx,
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 156f5d3..9ea6a67 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2229,6 +2229,8 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = {
.configure_filter = rt2x00mac_configure_filter,
.set_tim = rt2x00mac_set_tim,
.set_key = rt2x00mac_set_key,
+ .sw_scan_start = rt2x00mac_sw_scan_start,
+ .sw_scan_complete = rt2x00mac_sw_scan_complete,
.get_stats = rt2x00mac_get_stats,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt73usb_conf_tx,
--
1.7.1.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 05/17] rt2x00: Fix vgc_level_reg handling
2010-07-11 10:24 ` [PATCH 04/17] rt2x00: Disable link tuning while scanning Ivo van Doorn
@ 2010-07-11 10:25 ` Ivo van Doorn
2010-07-11 10:25 ` [PATCH 06/17] rt2x00: Implement watchdog monitoring Ivo van Doorn
0 siblings, 1 reply; 17+ messages in thread
From: Ivo van Doorn @ 2010-07-11 10:25 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, users, Helmut Schaa
Currently vgc_level_reg and vgc_level are equal to eachother,
while the purpose of vgc_level_reg is the value last written
to the register and is remembered through link tuning resets.
The vgc_level is the currently active level, which is
reset during link tuning resets.
The usage of these variables depends on the drivers, some drivers
need both, while others need only one of the two.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 8 +++++---
drivers/net/wireless/rt2x00/rt2500pci.c | 8 +++-----
drivers/net/wireless/rt2x00/rt2x00link.c | 8 ++++++++
3 files changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index d5f1fab..25e9dcf 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -586,9 +586,11 @@ static void rt2400pci_link_stats(struct rt2x00_dev *rt2x00dev,
static inline void rt2400pci_set_vgc(struct rt2x00_dev *rt2x00dev,
struct link_qual *qual, u8 vgc_level)
{
- rt2400pci_bbp_write(rt2x00dev, 13, vgc_level);
- qual->vgc_level = vgc_level;
- qual->vgc_level_reg = vgc_level;
+ if (qual->vgc_level_reg != vgc_level) {
+ rt2400pci_bbp_write(rt2x00dev, 13, vgc_level);
+ qual->vgc_level = vgc_level;
+ qual->vgc_level_reg = vgc_level;
+ }
}
static void rt2400pci_reset_tuner(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 096d6db..faa804c 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -626,6 +626,7 @@ static inline void rt2500pci_set_vgc(struct rt2x00_dev *rt2x00dev,
{
if (qual->vgc_level_reg != vgc_level) {
rt2500pci_bbp_write(rt2x00dev, 17, vgc_level);
+ qual->vgc_level = vgc_level;
qual->vgc_level_reg = vgc_level;
}
}
@@ -700,13 +701,10 @@ dynamic_cca_tune:
* R17 is inside the dynamic tuning range,
* start tuning the link based on the false cca counter.
*/
- if (qual->false_cca > 512 && qual->vgc_level_reg < 0x40) {
+ if (qual->false_cca > 512 && qual->vgc_level_reg < 0x40)
rt2500pci_set_vgc(rt2x00dev, qual, ++qual->vgc_level_reg);
- qual->vgc_level = qual->vgc_level_reg;
- } else if (qual->false_cca < 100 && qual->vgc_level_reg > 0x32) {
+ else if (qual->false_cca < 100 && qual->vgc_level_reg > 0x32)
rt2500pci_set_vgc(rt2x00dev, qual, --qual->vgc_level_reg);
- qual->vgc_level = qual->vgc_level_reg;
- }
}
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index 14f1d51..9acfc5c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -302,6 +302,7 @@ void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev)
void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna)
{
struct link_qual *qual = &rt2x00dev->link.qual;
+ u8 vgc_level = qual->vgc_level_reg;
if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return;
@@ -318,6 +319,13 @@ void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna)
memset(qual, 0, sizeof(*qual));
/*
+ * Restore the VGC level as stored in the registers,
+ * the driver can use this to determine if the register
+ * must be updated during reset or not.
+ */
+ qual->vgc_level_reg = vgc_level;
+
+ /*
* Reset the link tuner.
*/
rt2x00dev->ops->lib->reset_tuner(rt2x00dev, qual);
--
1.7.1.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 06/17] rt2x00: Implement watchdog monitoring
2010-07-11 10:25 ` [PATCH 05/17] rt2x00: Fix vgc_level_reg handling Ivo van Doorn
@ 2010-07-11 10:25 ` Ivo van Doorn
2010-07-11 10:26 ` [PATCH 07/17] rt2x00: Make rt2800_write_beacon only export to GPL Ivo van Doorn
0 siblings, 1 reply; 17+ messages in thread
From: Ivo van Doorn @ 2010-07-11 10:25 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, users, Helmut Schaa
Implement watchdog monitoring for USB devices (PCI support can
be added later). This will determine if URBs being uploaded to
the hardware are actually returning. Both rt2500usb and rt2800usb
have shown that URBs being uploaded can remain hanging without
being released by the hardware.
By using this watchdog, a queue can be reset when this occurs.
For rt2800usb it has been tested that the connection is preserved
even though this interruption.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2500usb.c | 2 +
drivers/net/wireless/rt2x00/rt2800usb.c | 2 +
drivers/net/wireless/rt2x00/rt2x00.h | 7 ++++
drivers/net/wireless/rt2x00/rt2x00dev.c | 10 ++++++
drivers/net/wireless/rt2x00/rt2x00lib.h | 26 +++++++++++++--
drivers/net/wireless/rt2x00/rt2x00link.c | 38 ++++++++++++++++++++++
drivers/net/wireless/rt2x00/rt2x00queue.c | 4 ++
drivers/net/wireless/rt2x00/rt2x00queue.h | 11 ++++++
drivers/net/wireless/rt2x00/rt2x00usb.c | 50 +++++++++++++++++++++++++++++
drivers/net/wireless/rt2x00/rt2x00usb.h | 10 ++++++
drivers/net/wireless/rt2x00/rt73usb.c | 2 +
11 files changed, 159 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 0b7888d..009323e 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1736,6 +1736,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_COPY_IV, &rt2x00dev->flags);
}
+ __set_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags);
/*
* Set the rssi offset.
@@ -1772,6 +1773,7 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
.rfkill_poll = rt2500usb_rfkill_poll,
.link_stats = rt2500usb_link_stats,
.reset_tuner = rt2500usb_reset_tuner,
+ .watchdog = rt2x00usb_watchdog,
.write_tx_desc = rt2500usb_write_tx_desc,
.write_beacon = rt2500usb_write_beacon,
.get_tx_data_len = rt2500usb_get_tx_data_len,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index e4ab4db..5aa7563 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -633,6 +633,7 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
if (!modparam_nohwcrypt)
__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
__set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
+ __set_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags);
/*
* Set the rssi offset.
@@ -655,6 +656,7 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
.link_stats = rt2800_link_stats,
.reset_tuner = rt2800_reset_tuner,
.link_tuner = rt2800_link_tuner,
+ .watchdog = rt2x00usb_watchdog,
.write_tx_desc = rt2800usb_write_tx_desc,
.write_tx_data = rt2800usb_write_tx_data,
.write_beacon = rt2800_write_beacon,
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index bf5e3f3..97b6261 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -332,6 +332,11 @@ struct link {
* Work structure for scheduling periodic link tuning.
*/
struct delayed_work work;
+
+ /*
+ * Work structure for scheduling periodic watchdog monitoring.
+ */
+ struct delayed_work watchdog_work;
};
/*
@@ -543,6 +548,7 @@ struct rt2x00lib_ops {
struct link_qual *qual);
void (*link_tuner) (struct rt2x00_dev *rt2x00dev,
struct link_qual *qual, const u32 count);
+ void (*watchdog) (struct rt2x00_dev *rt2x00dev);
/*
* TX control handlers
@@ -648,6 +654,7 @@ enum rt2x00_flags {
DRIVER_SUPPORT_CONTROL_FILTERS,
DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL,
DRIVER_SUPPORT_LINK_TUNING,
+ DRIVER_SUPPORT_WATCHDOG,
/*
* Driver configuration
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 12ee7bd..0906e14 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -70,6 +70,11 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
/*
+ * Start watchdog monitoring.
+ */
+ rt2x00link_start_watchdog(rt2x00dev);
+
+ /*
* Start the TX queues.
*/
ieee80211_wake_queues(rt2x00dev->hw);
@@ -89,6 +94,11 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
rt2x00queue_stop_queues(rt2x00dev);
/*
+ * Stop watchdog monitoring.
+ */
+ rt2x00link_stop_watchdog(rt2x00dev);
+
+ /*
* Disable RX.
*/
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index ed27de1..dc5c657 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -30,6 +30,7 @@
/*
* Interval defines
*/
+#define WATCHDOG_INTERVAL round_jiffies_relative(HZ)
#define LINK_TUNE_INTERVAL round_jiffies_relative(HZ)
/*
@@ -257,11 +258,30 @@ void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev);
void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna);
/**
- * rt2x00link_register - Initialize link tuning functionality
+ * rt2x00link_start_watchdog - Start periodic watchdog monitoring
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
- * Initialize work structure and all link tuning related
- * parameters. This will not start the link tuning process itself.
+ * This start the watchdog periodic work, this work will
+ *be executed periodically until &rt2x00link_stop_watchdog has
+ * been called.
+ */
+void rt2x00link_start_watchdog(struct rt2x00_dev *rt2x00dev);
+
+/**
+ * rt2x00link_stop_watchdog - Stop periodic watchdog monitoring
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ *
+ * After this function completed the watchdog monitoring will not
+ * be running until &rt2x00link_start_watchdog is called.
+ */
+void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev);
+
+/**
+ * rt2x00link_register - Initialize link tuning & watchdog functionality
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ *
+ * Initialize work structure and all link tuning and watchdog related
+ * parameters. This will not start the periodic work itself.
*/
void rt2x00link_register(struct rt2x00_dev *rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index 9acfc5c..666cef3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -407,7 +407,45 @@ static void rt2x00link_tuner(struct work_struct *work)
&link->work, LINK_TUNE_INTERVAL);
}
+void rt2x00link_start_watchdog(struct rt2x00_dev *rt2x00dev)
+{
+ struct link *link = &rt2x00dev->link;
+
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
+ !test_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags))
+ return;
+
+ ieee80211_queue_delayed_work(rt2x00dev->hw,
+ &link->watchdog_work, WATCHDOG_INTERVAL);
+}
+
+void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev)
+{
+ cancel_delayed_work_sync(&rt2x00dev->link.watchdog_work);
+}
+
+static void rt2x00link_watchdog(struct work_struct *work)
+{
+ struct rt2x00_dev *rt2x00dev =
+ container_of(work, struct rt2x00_dev, link.watchdog_work.work);
+ struct link *link = &rt2x00dev->link;
+
+ /*
+ * When the radio is shutting down we should
+ * immediately cease the watchdog monitoring.
+ */
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return;
+
+ rt2x00dev->ops->lib->watchdog(rt2x00dev);
+
+ if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ ieee80211_queue_delayed_work(rt2x00dev->hw,
+ &link->watchdog_work, WATCHDOG_INTERVAL);
+}
+
void rt2x00link_register(struct rt2x00_dev *rt2x00dev)
{
+ INIT_DELAYED_WORK(&rt2x00dev->link.watchdog_work, rt2x00link_watchdog);
INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00link_tuner);
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 5097fe0..a3401d3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -688,9 +688,11 @@ void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index)
if (index == Q_INDEX) {
queue->length++;
+ queue->last_index = jiffies;
} else if (index == Q_INDEX_DONE) {
queue->length--;
queue->count++;
+ queue->last_index_done = jiffies;
}
spin_unlock_irqrestore(&queue->lock, irqflags);
@@ -704,6 +706,8 @@ static void rt2x00queue_reset(struct data_queue *queue)
queue->count = 0;
queue->length = 0;
+ queue->last_index = jiffies;
+ queue->last_index_done = jiffies;
memset(queue->index, 0, sizeof(queue->index));
spin_unlock_irqrestore(&queue->lock, irqflags);
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index bd54f55..191e777 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -446,6 +446,8 @@ struct data_queue {
enum data_queue_qid qid;
spinlock_t lock;
+ unsigned long last_index;
+ unsigned long last_index_done;
unsigned int count;
unsigned short limit;
unsigned short threshold;
@@ -599,6 +601,15 @@ static inline int rt2x00queue_threshold(struct data_queue *queue)
}
/**
+ * rt2x00queue_timeout - Check if a timeout occured for this queue
+ * @queue: Queue to check.
+ */
+static inline int rt2x00queue_timeout(struct data_queue *queue)
+{
+ return time_after(queue->last_index, queue->last_index_done + (HZ / 10));
+}
+
+/**
* _rt2x00_desc_read - Read a word from the hardware descriptor.
* @desc: Base descriptor address
* @word: Word index from where the descriptor should be read.
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index a22837c..ff3a366 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -292,6 +292,56 @@ void rt2x00usb_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
}
EXPORT_SYMBOL_GPL(rt2x00usb_kill_tx_queue);
+static void rt2x00usb_watchdog_reset_tx(struct data_queue *queue)
+{
+ struct queue_entry_priv_usb *entry_priv;
+ unsigned short threshold = queue->threshold;
+
+ WARNING(queue->rt2x00dev, "TX queue %d timed out, invoke reset", queue->qid);
+
+ /*
+ * Temporarily disable the TX queue, this will force mac80211
+ * to use the other queues until this queue has been restored.
+ *
+ * Set the queue threshold to the queue limit. This prevents the
+ * queue from being enabled during the txdone handler.
+ */
+ queue->threshold = queue->limit;
+ ieee80211_stop_queue(queue->rt2x00dev->hw, queue->qid);
+
+ /*
+ * Reset all currently uploaded TX frames.
+ */
+ while (!rt2x00queue_empty(queue)) {
+ entry_priv = rt2x00queue_get_entry(queue, Q_INDEX_DONE)->priv_data;
+ usb_kill_urb(entry_priv->urb);
+
+ /*
+ * We need a short delay here to wait for
+ * the URB to be canceled and invoked the tx_done handler.
+ */
+ udelay(200);
+ }
+
+ /*
+ * The queue has been reset, and mac80211 is allowed to use the
+ * queue again.
+ */
+ queue->threshold = threshold;
+ ieee80211_wake_queue(queue->rt2x00dev->hw, queue->qid);
+}
+
+void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev)
+{
+ struct data_queue *queue;
+
+ tx_queue_for_each(rt2x00dev, queue) {
+ if (rt2x00queue_timeout(queue))
+ rt2x00usb_watchdog_reset_tx(queue);
+ }
+}
+EXPORT_SYMBOL_GPL(rt2x00usb_watchdog);
+
/*
* RX data handlers.
*/
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index 2b7a188..d3d3ddc 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -399,6 +399,16 @@ void rt2x00usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
void rt2x00usb_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
const enum data_queue_qid qid);
+/**
+ * rt2x00usb_watchdog - Watchdog for USB communication
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ *
+ * Check the health of the USB communication and determine
+ * if timeouts have occured. If this is the case, this function
+ * will reset all communication to restore functionality again.
+ */
+void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev);
+
/*
* Device initialization handlers.
*/
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 9ea6a67..cad07b6 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2136,6 +2136,7 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
if (!modparam_nohwcrypt)
__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
__set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
+ __set_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags);
/*
* Set the rssi offset.
@@ -2251,6 +2252,7 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
.link_stats = rt73usb_link_stats,
.reset_tuner = rt73usb_reset_tuner,
.link_tuner = rt73usb_link_tuner,
+ .watchdog = rt2x00usb_watchdog,
.write_tx_desc = rt73usb_write_tx_desc,
.write_beacon = rt73usb_write_beacon,
.get_tx_data_len = rt73usb_get_tx_data_len,
--
1.7.1.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 07/17] rt2x00: Make rt2800_write_beacon only export to GPL
2010-07-11 10:25 ` [PATCH 06/17] rt2x00: Implement watchdog monitoring Ivo van Doorn
@ 2010-07-11 10:26 ` Ivo van Doorn
2010-07-11 10:26 ` [PATCH 08/17] rt2x00: Convert rt2x00 to use threaded interrupts Ivo van Doorn
0 siblings, 1 reply; 17+ messages in thread
From: Ivo van Doorn @ 2010-07-11 10:26 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, users, Helmut Schaa
rt2800_write_beacon is the only function which uses
EXPORT_SYMBOL instead of EXPORT_SYMBOL_GPL. All symbols
in rt2x00 should however use the GPL restricted export.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index bcf50fc..afad3e1 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -473,7 +473,7 @@ void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc)
dev_kfree_skb_any(entry->skb);
entry->skb = NULL;
}
-EXPORT_SYMBOL(rt2800_write_beacon);
+EXPORT_SYMBOL_GPL(rt2800_write_beacon);
static void inline rt2800_clear_beacon(struct rt2x00_dev *rt2x00dev,
unsigned int beacon_base)
--
1.7.1.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 08/17] rt2x00: Convert rt2x00 to use threaded interrupts
2010-07-11 10:26 ` [PATCH 07/17] rt2x00: Make rt2800_write_beacon only export to GPL Ivo van Doorn
@ 2010-07-11 10:26 ` Ivo van Doorn
2010-07-11 10:27 ` [PATCH 09/17] rt2x00: Allow beacon update without scheduling a work Ivo van Doorn
0 siblings, 1 reply; 17+ messages in thread
From: Ivo van Doorn @ 2010-07-11 10:26 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, users, Helmut Schaa
From: Helmut Schaa <helmut.schaa@googlemail.com>
Use threaded interrupts for all rt2x00 PCI devices.
This has several generic advantages:
- Reduce the time we spend in hard irq context
- Use non-atmic mac80211 functions for rx/tx
Furthermore implementing broad- and multicast buffering will be
much easier in process context while maintaining low latency and
updating the beacon just before transmission (pre tbtt interrupt)
can also be done in process context.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 54 ++++++++++++++++++--------
drivers/net/wireless/rt2x00/rt2500pci.c | 55 +++++++++++++++++++--------
drivers/net/wireless/rt2x00/rt2500usb.c | 2 +
drivers/net/wireless/rt2x00/rt2800pci.c | 50 ++++++++++++++++++------
drivers/net/wireless/rt2x00/rt2800usb.c | 2 +
drivers/net/wireless/rt2x00/rt2x00.h | 11 +++++
drivers/net/wireless/rt2x00/rt2x00dev.c | 23 ++++++++++-
drivers/net/wireless/rt2x00/rt2x00pci.c | 6 ++-
drivers/net/wireless/rt2x00/rt2x00reg.h | 2 +
drivers/net/wireless/rt2x00/rt61pci.c | 64 +++++++++++++++++++++----------
drivers/net/wireless/rt2x00/rt73usb.c | 2 +
11 files changed, 201 insertions(+), 70 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 25e9dcf..116244b 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -879,7 +879,8 @@ static void rt2400pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
static void rt2400pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
- int mask = (state == STATE_RADIO_IRQ_OFF);
+ int mask = (state == STATE_RADIO_IRQ_OFF) ||
+ (state == STATE_RADIO_IRQ_OFF_ISR);
u32 reg;
/*
@@ -980,7 +981,9 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2400pci_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
+ case STATE_RADIO_IRQ_OFF_ISR:
rt2400pci_toggle_irq(rt2x00dev, state);
break;
case STATE_DEEP_SLEEP:
@@ -1235,23 +1238,10 @@ static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev,
}
}
-static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance)
+static irqreturn_t rt2400pci_interrupt_thread(int irq, void *dev_instance)
{
struct rt2x00_dev *rt2x00dev = dev_instance;
- u32 reg;
-
- /*
- * Get the interrupt sources & saved to local variable.
- * Write register value back to clear pending interrupts.
- */
- rt2x00pci_register_read(rt2x00dev, CSR7, ®);
- rt2x00pci_register_write(rt2x00dev, CSR7, reg);
-
- if (!reg)
- return IRQ_NONE;
-
- if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
- return IRQ_HANDLED;
+ u32 reg = rt2x00dev->irqvalue[0];
/*
* Handle interrupts, walk through all bits
@@ -1289,9 +1279,40 @@ static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance)
if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
rt2400pci_txdone(rt2x00dev, QID_AC_BK);
+ /* Enable interrupts again. */
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+ STATE_RADIO_IRQ_ON_ISR);
return IRQ_HANDLED;
}
+static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance)
+{
+ struct rt2x00_dev *rt2x00dev = dev_instance;
+ u32 reg;
+
+ /*
+ * Get the interrupt sources & saved to local variable.
+ * Write register value back to clear pending interrupts.
+ */
+ rt2x00pci_register_read(rt2x00dev, CSR7, ®);
+ rt2x00pci_register_write(rt2x00dev, CSR7, reg);
+
+ if (!reg)
+ return IRQ_NONE;
+
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return IRQ_HANDLED;
+
+ /* Store irqvalues for use in the interrupt thread. */
+ rt2x00dev->irqvalue[0] = reg;
+
+ /* Disable interrupts, will be enabled again in the interrupt thread. */
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+ STATE_RADIO_IRQ_OFF_ISR);
+
+ return IRQ_WAKE_THREAD;
+}
+
/*
* Device probe functions.
*/
@@ -1581,6 +1602,7 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = {
static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
.irq_handler = rt2400pci_interrupt,
+ .irq_handler_thread = rt2400pci_interrupt_thread,
.probe_hw = rt2400pci_probe_hw,
.initialize = rt2x00pci_initialize,
.uninitialize = rt2x00pci_uninitialize,
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index faa804c..5e80948 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1033,7 +1033,8 @@ static void rt2500pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
static void rt2500pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
- int mask = (state == STATE_RADIO_IRQ_OFF);
+ int mask = (state == STATE_RADIO_IRQ_OFF) ||
+ (state == STATE_RADIO_IRQ_OFF_ISR);
u32 reg;
/*
@@ -1134,7 +1135,9 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2500pci_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
+ case STATE_RADIO_IRQ_OFF_ISR:
rt2500pci_toggle_irq(rt2x00dev, state);
break;
case STATE_DEEP_SLEEP:
@@ -1367,23 +1370,10 @@ static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev,
}
}
-static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
+static irqreturn_t rt2500pci_interrupt_thread(int irq, void *dev_instance)
{
struct rt2x00_dev *rt2x00dev = dev_instance;
- u32 reg;
-
- /*
- * Get the interrupt sources & saved to local variable.
- * Write register value back to clear pending interrupts.
- */
- rt2x00pci_register_read(rt2x00dev, CSR7, ®);
- rt2x00pci_register_write(rt2x00dev, CSR7, reg);
-
- if (!reg)
- return IRQ_NONE;
-
- if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
- return IRQ_HANDLED;
+ u32 reg = rt2x00dev->irqvalue[0];
/*
* Handle interrupts, walk through all bits
@@ -1421,9 +1411,41 @@ static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
rt2500pci_txdone(rt2x00dev, QID_AC_BK);
+ /* Enable interrupts again. */
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+ STATE_RADIO_IRQ_ON_ISR);
+
return IRQ_HANDLED;
}
+static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
+{
+ struct rt2x00_dev *rt2x00dev = dev_instance;
+ u32 reg;
+
+ /*
+ * Get the interrupt sources & saved to local variable.
+ * Write register value back to clear pending interrupts.
+ */
+ rt2x00pci_register_read(rt2x00dev, CSR7, ®);
+ rt2x00pci_register_write(rt2x00dev, CSR7, reg);
+
+ if (!reg)
+ return IRQ_NONE;
+
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return IRQ_HANDLED;
+
+ /* Store irqvalues for use in the interrupt thread. */
+ rt2x00dev->irqvalue[0] = reg;
+
+ /* Disable interrupts, will be enabled again in the interrupt thread. */
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+ STATE_RADIO_IRQ_OFF_ISR);
+
+ return IRQ_WAKE_THREAD;
+}
+
/*
* Device probe functions.
*/
@@ -1874,6 +1896,7 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
.irq_handler = rt2500pci_interrupt,
+ .irq_handler_thread = rt2500pci_interrupt_thread,
.probe_hw = rt2500pci_probe_hw,
.initialize = rt2x00pci_initialize,
.uninitialize = rt2x00pci_uninitialize,
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 009323e..242d595 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1004,7 +1004,9 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2500usb_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
+ case STATE_RADIO_IRQ_OFF_ISR:
/* No support, but no error either */
break;
case STATE_DEEP_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index a9eca99..f21b77c 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -422,7 +422,8 @@ static void rt2800pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
- int mask = (state == STATE_RADIO_IRQ_ON);
+ int mask = (state == STATE_RADIO_IRQ_ON) ||
+ (state == STATE_RADIO_IRQ_ON_ISR);
u32 reg;
/*
@@ -631,7 +632,9 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2800pci_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
+ case STATE_RADIO_IRQ_OFF_ISR:
rt2800pci_toggle_irq(rt2x00dev, state);
break;
case STATE_DEEP_SLEEP:
@@ -929,20 +932,10 @@ static void rt2800pci_wakeup(struct rt2x00_dev *rt2x00dev)
rt2800_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS);
}
-static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
+static irqreturn_t rt2800pci_interrupt_thread(int irq, void *dev_instance)
{
struct rt2x00_dev *rt2x00dev = dev_instance;
- u32 reg;
-
- /* Read status and ACK all interrupts */
- rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
- rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
-
- if (!reg)
- return IRQ_NONE;
-
- if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
- return IRQ_HANDLED;
+ u32 reg = rt2x00dev->irqvalue[0];
/*
* 1 - Rx ring done interrupt.
@@ -962,9 +955,39 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP))
rt2800pci_wakeup(rt2x00dev);
+ /* Enable interrupts again. */
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+ STATE_RADIO_IRQ_ON_ISR);
+
return IRQ_HANDLED;
}
+static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
+{
+ struct rt2x00_dev *rt2x00dev = dev_instance;
+ u32 reg;
+
+ /* Read status and ACK all interrupts */
+ rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
+ rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
+
+ if (!reg)
+ return IRQ_NONE;
+
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return IRQ_HANDLED;
+
+ /* Store irqvalue for use in the interrupt thread. */
+ rt2x00dev->irqvalue[0] = reg;
+
+ /* Disable interrupts, will be enabled again in the interrupt thread. */
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+ STATE_RADIO_IRQ_OFF_ISR);
+
+
+ return IRQ_WAKE_THREAD;
+}
+
/*
* Device probe functions.
*/
@@ -1049,6 +1072,7 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
.irq_handler = rt2800pci_interrupt,
+ .irq_handler_thread = rt2800pci_interrupt_thread,
.probe_hw = rt2800pci_probe_hw,
.get_firmware_name = rt2800pci_get_firmware_name,
.check_firmware = rt2800pci_check_firmware,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 5aa7563..df78e28 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -406,7 +406,9 @@ static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2800usb_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
+ case STATE_RADIO_IRQ_OFF_ISR:
/* No support, but no error either */
break;
case STATE_DEEP_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 97b6261..0fa2141 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -515,6 +515,11 @@ struct rt2x00lib_ops {
irq_handler_t irq_handler;
/*
+ * Threaded Interrupt handlers.
+ */
+ irq_handler_t irq_handler_thread;
+
+ /*
* Device init handlers.
*/
int (*probe_hw) (struct rt2x00_dev *rt2x00dev);
@@ -871,6 +876,12 @@ struct rt2x00_dev {
const struct firmware *fw;
/*
+ * Interrupt values, stored between interrupt service routine
+ * and interrupt thread routine.
+ */
+ u32 irqvalue[2];
+
+ /*
* Driver specific data.
*/
void *priv;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 0906e14..d3ebb41 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -340,9 +340,17 @@ void rt2x00lib_txdone(struct queue_entry *entry,
* send the status report back.
*/
if (!(skbdesc_flags & SKBDESC_NOT_MAC80211))
- ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb);
+ /*
+ * Only PCI and SOC devices process the tx status in process
+ * context. Hence use ieee80211_tx_status for PCI and SOC
+ * devices and stick to ieee80211_tx_status_irqsafe for USB.
+ */
+ if (rt2x00_is_usb(rt2x00dev))
+ ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb);
+ else
+ ieee80211_tx_status(rt2x00dev->hw, entry->skb);
else
- dev_kfree_skb_irq(entry->skb);
+ dev_kfree_skb_any(entry->skb);
/*
* Make this entry available for reuse.
@@ -489,7 +497,16 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
*/
rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
memcpy(IEEE80211_SKB_RXCB(entry->skb), rx_status, sizeof(*rx_status));
- ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb);
+
+ /*
+ * Currently only PCI and SOC devices handle rx interrupts in process
+ * context. Hence, use ieee80211_rx_irqsafe for USB and ieee80211_rx_ni
+ * for PCI and SOC devices.
+ */
+ if (rt2x00_is_usb(rt2x00dev))
+ ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb);
+ else
+ ieee80211_rx_ni(rt2x00dev->hw, entry->skb);
/*
* Replace the skb with the freshly allocated one.
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index fc9da83..19b262e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -153,8 +153,10 @@ int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
/*
* Register interrupt handler.
*/
- status = request_irq(rt2x00dev->irq, rt2x00dev->ops->lib->irq_handler,
- IRQF_SHARED, rt2x00dev->name, rt2x00dev);
+ status = request_threaded_irq(rt2x00dev->irq,
+ rt2x00dev->ops->lib->irq_handler,
+ rt2x00dev->ops->lib->irq_handler_thread,
+ IRQF_SHARED, rt2x00dev->name, rt2x00dev);
if (status) {
ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
rt2x00dev->irq, status);
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index b9fe948..055501c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -88,6 +88,8 @@ enum dev_state {
STATE_RADIO_RX_OFF_LINK,
STATE_RADIO_IRQ_ON,
STATE_RADIO_IRQ_OFF,
+ STATE_RADIO_IRQ_ON_ISR,
+ STATE_RADIO_IRQ_OFF_ISR,
};
/*
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index fe7bce7..049433f 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1622,7 +1622,8 @@ static void rt61pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
static void rt61pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
- int mask = (state == STATE_RADIO_IRQ_OFF);
+ int mask = (state == STATE_RADIO_IRQ_OFF) ||
+ (state == STATE_RADIO_IRQ_OFF_ISR);
u32 reg;
/*
@@ -1739,7 +1740,9 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
rt61pci_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
+ case STATE_RADIO_IRQ_OFF_ISR:
rt61pci_toggle_irq(rt2x00dev, state);
break;
case STATE_DEEP_SLEEP:
@@ -2147,27 +2150,11 @@ static void rt61pci_wakeup(struct rt2x00_dev *rt2x00dev)
rt61pci_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS);
}
-static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance)
+static irqreturn_t rt61pci_interrupt_thread(int irq, void *dev_instance)
{
struct rt2x00_dev *rt2x00dev = dev_instance;
- u32 reg_mcu;
- u32 reg;
-
- /*
- * Get the interrupt sources & saved to local variable.
- * Write register value back to clear pending interrupts.
- */
- rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, ®_mcu);
- rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg_mcu);
-
- rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
- rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
-
- if (!reg && !reg_mcu)
- return IRQ_NONE;
-
- if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
- return IRQ_HANDLED;
+ u32 reg = rt2x00dev->irqvalue[0];
+ u32 reg_mcu = rt2x00dev->irqvalue[1];
/*
* Handle interrupts, walk through all bits
@@ -2206,9 +2193,45 @@ static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance)
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_BEACON_DONE))
rt2x00lib_beacondone(rt2x00dev);
+ /* Enable interrupts again. */
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+ STATE_RADIO_IRQ_ON_ISR);
return IRQ_HANDLED;
}
+
+static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance)
+{
+ struct rt2x00_dev *rt2x00dev = dev_instance;
+ u32 reg_mcu;
+ u32 reg;
+
+ /*
+ * Get the interrupt sources & saved to local variable.
+ * Write register value back to clear pending interrupts.
+ */
+ rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, ®_mcu);
+ rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg_mcu);
+
+ rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
+ rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
+
+ if (!reg && !reg_mcu)
+ return IRQ_NONE;
+
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return IRQ_HANDLED;
+
+ /* Store irqvalues for use in the interrupt thread. */
+ rt2x00dev->irqvalue[0] = reg;
+ rt2x00dev->irqvalue[1] = reg_mcu;
+
+ /* Disable interrupts, will be enabled again in the interrupt thread. */
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+ STATE_RADIO_IRQ_OFF_ISR);
+ return IRQ_WAKE_THREAD;
+}
+
/*
* Device probe functions.
*/
@@ -2795,6 +2818,7 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
.irq_handler = rt61pci_interrupt,
+ .irq_handler_thread = rt61pci_interrupt_thread,
.probe_hw = rt61pci_probe_hw,
.get_firmware_name = rt61pci_get_firmware_name,
.check_firmware = rt61pci_check_firmware,
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index cad07b6..aa9de18 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1400,7 +1400,9 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
rt73usb_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
+ case STATE_RADIO_IRQ_OFF_ISR:
/* No support, but no error either */
break;
case STATE_DEEP_SLEEP:
--
1.7.1.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 09/17] rt2x00: Allow beacon update without scheduling a work
2010-07-11 10:26 ` [PATCH 08/17] rt2x00: Convert rt2x00 to use threaded interrupts Ivo van Doorn
@ 2010-07-11 10:27 ` Ivo van Doorn
2010-07-11 10:27 ` [PATCH 10/17] rt2x00: Implement broad- and multicast buffering Ivo van Doorn
0 siblings, 1 reply; 17+ messages in thread
From: Ivo van Doorn @ 2010-07-11 10:27 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, users, Helmut Schaa
From: Helmut Schaa <helmut.schaa@googlemail.com>
Since all rt2x00 PCI drivers use threaded interrupts now we don't need
to schedule a work just to update the beacon. The only place where the
beacon still gets updated in atomic context is from the set_tim
callback. Hence, move the work scheduling there.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00dev.c | 13 +++++--------
drivers/net/wireless/rt2x00/rt2x00mac.c | 26 +++++++++++++++++++++++++-
2 files changed, 30 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index d3ebb41..e255725 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -181,7 +181,7 @@ static void rt2x00lib_intf_scheduled(struct work_struct *work)
static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
struct ieee80211_vif *vif)
{
- struct rt2x00_intf *intf = vif_to_intf(vif);
+ struct rt2x00_dev *rt2x00dev = data;
if (vif->type != NL80211_IFTYPE_AP &&
vif->type != NL80211_IFTYPE_ADHOC &&
@@ -189,9 +189,7 @@ static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
vif->type != NL80211_IFTYPE_WDS)
return;
- spin_lock(&intf->lock);
- intf->delayed_flags |= DELAYED_UPDATE_BEACON;
- spin_unlock(&intf->lock);
+ rt2x00queue_update_beacon(rt2x00dev, vif, true);
}
void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
@@ -199,11 +197,10 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return;
- ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw,
- rt2x00lib_beacondone_iter,
- rt2x00dev);
+ ieee80211_iterate_active_interfaces(rt2x00dev->hw,
+ rt2x00lib_beacondone_iter,
+ rt2x00dev);
- ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->intf_work);
}
EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index bbce496..4d8d232 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -433,12 +433,36 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
}
EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter);
+static void rt2x00mac_set_tim_iter(void *data, u8 *mac,
+ struct ieee80211_vif *vif)
+{
+ struct rt2x00_intf *intf = vif_to_intf(vif);
+
+ if (vif->type != NL80211_IFTYPE_AP &&
+ vif->type != NL80211_IFTYPE_ADHOC &&
+ vif->type != NL80211_IFTYPE_MESH_POINT &&
+ vif->type != NL80211_IFTYPE_WDS)
+ return;
+
+ spin_lock(&intf->lock);
+ intf->delayed_flags |= DELAYED_UPDATE_BEACON;
+ spin_unlock(&intf->lock);
+}
+
int rt2x00mac_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
bool set)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
- rt2x00lib_beacondone(rt2x00dev);
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return 0;
+
+ ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw,
+ rt2x00mac_set_tim_iter,
+ rt2x00dev);
+
+ /* queue work to upodate the beacon template */
+ ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->intf_work);
return 0;
}
EXPORT_SYMBOL_GPL(rt2x00mac_set_tim);
--
1.7.1.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 10/17] rt2x00: Implement broad- and multicast buffering
2010-07-11 10:27 ` [PATCH 09/17] rt2x00: Allow beacon update without scheduling a work Ivo van Doorn
@ 2010-07-11 10:27 ` Ivo van Doorn
2010-07-11 10:28 ` [PATCH 11/17] rt2x00: Use pretbtt irq for fetching beacons on rt2800pci Ivo van Doorn
0 siblings, 1 reply; 17+ messages in thread
From: Ivo van Doorn @ 2010-07-11 10:27 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, users, Helmut Schaa
From: Helmut Schaa <helmut.schaa@googlemail.com>
Although mac80211 buffers broad- and mutlicast frames for us in AP mode
we still have to send them out after a DTIM beacon. Implement this
behavior by sending out the buffered frames when the beacondone
interrupt is processed.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00dev.c | 32 +++++++++++++++++++++++++++++-
1 files changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index e255725..ae0adff 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -178,6 +178,28 @@ static void rt2x00lib_intf_scheduled(struct work_struct *work)
/*
* Interrupt context handlers.
*/
+static void rt2x00lib_bc_buffer_iter(void *data, u8 *mac,
+ struct ieee80211_vif *vif)
+{
+ struct rt2x00_dev *rt2x00dev = data;
+ struct sk_buff *skb;
+
+ /*
+ * Only AP mode interfaces do broad- and multicast buffering
+ */
+ if (vif->type != NL80211_IFTYPE_AP)
+ return;
+
+ /*
+ * Send out buffered broad- and multicast frames
+ */
+ skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif);
+ while (skb) {
+ rt2x00mac_tx(rt2x00dev->hw, skb);
+ skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif);
+ }
+}
+
static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
struct ieee80211_vif *vif)
{
@@ -197,9 +219,15 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return;
+ /* send buffered bc/mc frames out for every bssid */
ieee80211_iterate_active_interfaces(rt2x00dev->hw,
- rt2x00lib_beacondone_iter,
- rt2x00dev);
+ rt2x00lib_bc_buffer_iter,
+ rt2x00dev);
+
+ /* fetch next beacon */
+ ieee80211_iterate_active_interfaces(rt2x00dev->hw,
+ rt2x00lib_beacondone_iter,
+ rt2x00dev);
}
EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
--
1.7.1.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 11/17] rt2x00: Use pretbtt irq for fetching beacons on rt2800pci
2010-07-11 10:27 ` [PATCH 10/17] rt2x00: Implement broad- and multicast buffering Ivo van Doorn
@ 2010-07-11 10:28 ` Ivo van Doorn
2010-07-11 10:28 ` [PATCH 12/17] rt2x00: Use separate mac80211_ops for rt2800pci and rt2800usb Ivo van Doorn
0 siblings, 1 reply; 17+ messages in thread
From: Ivo van Doorn @ 2010-07-11 10:28 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, users, Helmut Schaa
From: Helmut Schaa <helmut.schaa@googlemail.com>
Updating the beacon on pre tbtt instead of beacondone allows much lower
latency in regard to TIM updates. Hence, use the pre tbtt interrupt for
updating the beacon in rt2800pci (older devices don't provide a pre tbtt
interrupt).
Also, add a new driver flag to indicate if a driver has pre tbtt support
or not and implement the according behavior in rt2x00lib.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800.h | 8 +++++++-
drivers/net/wireless/rt2x00/rt2800lib.c | 16 ++++++++++++++++
drivers/net/wireless/rt2x00/rt2800pci.c | 28 +++++++++++++++++++++++-----
drivers/net/wireless/rt2x00/rt2x00.h | 2 ++
drivers/net/wireless/rt2x00/rt2x00dev.c | 26 ++++++++++++++++++++++----
5 files changed, 70 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index edd3734..dc93e14 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -719,14 +719,20 @@
#define TBTT_TIMER 0x1124
/*
- * INT_TIMER_CFG:
+ * INT_TIMER_CFG: timer configuration
+ * PRE_TBTT_TIMER: leadtime to tbtt for pretbtt interrupt in units of 1/16 TU
+ * GP_TIMER: period of general purpose timer in units of 1/16 TU
*/
#define INT_TIMER_CFG 0x1128
+#define INT_TIMER_CFG_PRE_TBTT_TIMER FIELD32(0x0000ffff)
+#define INT_TIMER_CFG_GP_TIMER FIELD32(0xffff0000)
/*
* INT_TIMER_EN: GP-timer and pre-tbtt Int enable
*/
#define INT_TIMER_EN 0x112c
+#define INT_TIMER_EN_PRE_TBTT_TIMER FIELD32(0x00000001)
+#define INT_TIMER_EN_GP_TIMER FIELD32(0x00000002)
/*
* CH_IDLE_STA: channel idle time
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index afad3e1..5572732 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -807,6 +807,15 @@ void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE,
(conf->sync == TSF_SYNC_BEACON));
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+ /*
+ * Enable pre tbtt interrupt for beaconing modes
+ */
+ rt2800_register_read(rt2x00dev, INT_TIMER_EN, ®);
+ rt2x00_set_field32(®, INT_TIMER_EN_PRE_TBTT_TIMER,
+ (conf->sync == TSF_SYNC_BEACON));
+ rt2800_register_write(rt2x00dev, INT_TIMER_EN, reg);
+
}
if (flags & CONFIG_UPDATE_MAC) {
@@ -1732,6 +1741,13 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
rt2800_register_read(rt2x00dev, TX_STA_CNT1, ®);
rt2800_register_read(rt2x00dev, TX_STA_CNT2, ®);
+ /*
+ * Setup leadtime for pre tbtt interrupt to 6ms
+ */
+ rt2800_register_read(rt2x00dev, INT_TIMER_CFG, ®);
+ rt2x00_set_field32(®, INT_TIMER_CFG_PRE_TBTT_TIMER, 6 << 4);
+ rt2800_register_write(rt2x00dev, INT_TIMER_CFG, reg);
+
return 0;
}
EXPORT_SYMBOL_GPL(rt2800_init_registers);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index f21b77c..c0c38f9 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -938,20 +938,32 @@ static irqreturn_t rt2800pci_interrupt_thread(int irq, void *dev_instance)
u32 reg = rt2x00dev->irqvalue[0];
/*
- * 1 - Rx ring done interrupt.
+ * 1 - Pre TBTT interrupt.
+ */
+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT))
+ rt2x00lib_pretbtt(rt2x00dev);
+
+ /*
+ * 2 - Beacondone interrupt.
+ */
+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT))
+ rt2x00lib_beacondone(rt2x00dev);
+
+ /*
+ * 3 - Rx ring done interrupt.
*/
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE))
rt2x00pci_rxdone(rt2x00dev);
+ /*
+ * 4 - Tx done interrupt.
+ */
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS))
rt2800pci_txdone(rt2x00dev);
/*
- * Current beacon was sent out, fetch the next one
+ * 5 - Auto wakeup interrupt.
*/
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT))
- rt2x00lib_beacondone(rt2x00dev);
-
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP))
rt2800pci_wakeup(rt2x00dev);
@@ -1052,6 +1064,12 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
__set_bit(DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL, &rt2x00dev->flags);
/*
+ * This device has a pre tbtt interrupt and thus fetches
+ * a new beacon directly prior to transmission.
+ */
+ __set_bit(DRIVER_SUPPORT_PRE_TBTT_INTERRUPT, &rt2x00dev->flags);
+
+ /*
* This device requires firmware.
*/
if (!rt2x00_is_soc(rt2x00dev))
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 0fa2141..9dd0d17 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -658,6 +658,7 @@ enum rt2x00_flags {
CONFIG_SUPPORT_HW_CRYPTO,
DRIVER_SUPPORT_CONTROL_FILTERS,
DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL,
+ DRIVER_SUPPORT_PRE_TBTT_INTERRUPT,
DRIVER_SUPPORT_LINK_TUNING,
DRIVER_SUPPORT_WATCHDOG,
@@ -1071,6 +1072,7 @@ static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
* Interrupt context handlers.
*/
void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev);
+void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_txdone(struct queue_entry *entry,
struct txdone_entry_desc *txdesc);
void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index ae0adff..f59b9f7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -200,8 +200,8 @@ static void rt2x00lib_bc_buffer_iter(void *data, u8 *mac,
}
}
-static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
- struct ieee80211_vif *vif)
+static void rt2x00lib_beaconupdate_iter(void *data, u8 *mac,
+ struct ieee80211_vif *vif)
{
struct rt2x00_dev *rt2x00dev = data;
@@ -223,15 +223,33 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
ieee80211_iterate_active_interfaces(rt2x00dev->hw,
rt2x00lib_bc_buffer_iter,
rt2x00dev);
+ /*
+ * Devices with pre tbtt interrupt don't need to update the beacon
+ * here as they will fetch the next beacon directly prior to
+ * transmission.
+ */
+ if (test_bit(DRIVER_SUPPORT_PRE_TBTT_INTERRUPT, &rt2x00dev->flags))
+ return;
/* fetch next beacon */
ieee80211_iterate_active_interfaces(rt2x00dev->hw,
- rt2x00lib_beacondone_iter,
+ rt2x00lib_beaconupdate_iter,
rt2x00dev);
-
}
EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
+void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev)
+{
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return;
+
+ /* fetch next beacon */
+ ieee80211_iterate_active_interfaces(rt2x00dev->hw,
+ rt2x00lib_beaconupdate_iter,
+ rt2x00dev);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_pretbtt);
+
void rt2x00lib_txdone(struct queue_entry *entry,
struct txdone_entry_desc *txdesc)
{
--
1.7.1.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 12/17] rt2x00: Use separate mac80211_ops for rt2800pci and rt2800usb
2010-07-11 10:28 ` [PATCH 11/17] rt2x00: Use pretbtt irq for fetching beacons on rt2800pci Ivo van Doorn
@ 2010-07-11 10:28 ` Ivo van Doorn
2010-07-11 10:29 ` [PATCH 13/17] rt2x00: Remove set_tim callback from PCI drivers Ivo van Doorn
0 siblings, 1 reply; 17+ messages in thread
From: Ivo van Doorn @ 2010-07-11 10:28 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, users, Helmut Schaa
From: Helmut Schaa <helmut.schaa@googlemail.com>
Use separate mac80211_ops for rt2800pci and rt2800usb in preparation
for further fixes. This shouldn't introduce functional changes.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 48 +++++++++----------------------
drivers/net/wireless/rt2x00/rt2800lib.h | 10 ++++++-
drivers/net/wireless/rt2x00/rt2800pci.c | 24 +++++++++++++++-
drivers/net/wireless/rt2x00/rt2800usb.c | 24 +++++++++++++++-
4 files changed, 69 insertions(+), 37 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 5572732..64bfa6e 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2740,8 +2740,8 @@ EXPORT_SYMBOL_GPL(rt2800_probe_hw_mode);
/*
* IEEE80211 stack callback functions.
*/
-static void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx,
- u32 *iv32, u16 *iv16)
+void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, u32 *iv32,
+ u16 *iv16)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct mac_iveiv_entry iveiv_entry;
@@ -2754,8 +2754,9 @@ static void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx,
memcpy(iv16, &iveiv_entry.iv[0], sizeof(*iv16));
memcpy(iv32, &iveiv_entry.iv[4], sizeof(*iv32));
}
+EXPORT_SYMBOL_GPL(rt2800_get_tkip_seq);
-static int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
u32 reg;
@@ -2791,9 +2792,10 @@ static int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
return 0;
}
+EXPORT_SYMBOL_GPL(rt2800_set_rts_threshold);
-static int rt2800_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
- const struct ieee80211_tx_queue_params *params)
+int rt2800_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
+ const struct ieee80211_tx_queue_params *params)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct data_queue *queue;
@@ -2858,8 +2860,9 @@ static int rt2800_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
return 0;
}
+EXPORT_SYMBOL_GPL(rt2800_conf_tx);
-static u64 rt2800_get_tsf(struct ieee80211_hw *hw)
+u64 rt2800_get_tsf(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
u64 tsf;
@@ -2872,12 +2875,11 @@ static u64 rt2800_get_tsf(struct ieee80211_hw *hw)
return tsf;
}
+EXPORT_SYMBOL_GPL(rt2800_get_tsf);
-static int rt2800_ampdu_action(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- enum ieee80211_ampdu_mlme_action action,
- struct ieee80211_sta *sta,
- u16 tid, u16 *ssn)
+int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ enum ieee80211_ampdu_mlme_action action,
+ struct ieee80211_sta *sta, u16 tid, u16 *ssn)
{
int ret = 0;
@@ -2901,29 +2903,7 @@ static int rt2800_ampdu_action(struct ieee80211_hw *hw,
return ret;
}
-
-const struct ieee80211_ops rt2800_mac80211_ops = {
- .tx = rt2x00mac_tx,
- .start = rt2x00mac_start,
- .stop = rt2x00mac_stop,
- .add_interface = rt2x00mac_add_interface,
- .remove_interface = rt2x00mac_remove_interface,
- .config = rt2x00mac_config,
- .configure_filter = rt2x00mac_configure_filter,
- .set_tim = rt2x00mac_set_tim,
- .set_key = rt2x00mac_set_key,
- .sw_scan_start = rt2x00mac_sw_scan_start,
- .sw_scan_complete = rt2x00mac_sw_scan_complete,
- .get_stats = rt2x00mac_get_stats,
- .get_tkip_seq = rt2800_get_tkip_seq,
- .set_rts_threshold = rt2800_set_rts_threshold,
- .bss_info_changed = rt2x00mac_bss_info_changed,
- .conf_tx = rt2800_conf_tx,
- .get_tsf = rt2800_get_tsf,
- .rfkill_poll = rt2x00mac_rfkill_poll,
- .ampdu_action = rt2800_ampdu_action,
-};
-EXPORT_SYMBOL_GPL(rt2800_mac80211_ops);
+EXPORT_SYMBOL_GPL(rt2800_ampdu_action);
MODULE_AUTHOR(DRV_PROJECT ", Bartlomiej Zolnierkiewicz");
MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index eb3a4f5..10f8f2f 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -159,6 +159,14 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev);
int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev);
int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev);
-extern const struct ieee80211_ops rt2800_mac80211_ops;
+void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, u32 *iv32,
+ u16 *iv16);
+int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value);
+int rt2800_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
+ const struct ieee80211_tx_queue_params *params);
+u64 rt2800_get_tsf(struct ieee80211_hw *hw);
+int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ enum ieee80211_ampdu_mlme_action action,
+ struct ieee80211_sta *sta, u16 tid, u16 *ssn);
#endif /* RT2800LIB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index c0c38f9..4c138eb 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1088,6 +1088,28 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
return 0;
}
+static const struct ieee80211_ops rt2800pci_mac80211_ops = {
+ .tx = rt2x00mac_tx,
+ .start = rt2x00mac_start,
+ .stop = rt2x00mac_stop,
+ .add_interface = rt2x00mac_add_interface,
+ .remove_interface = rt2x00mac_remove_interface,
+ .config = rt2x00mac_config,
+ .configure_filter = rt2x00mac_configure_filter,
+ .set_tim = rt2x00mac_set_tim,
+ .set_key = rt2x00mac_set_key,
+ .sw_scan_start = rt2x00mac_sw_scan_start,
+ .sw_scan_complete = rt2x00mac_sw_scan_complete,
+ .get_stats = rt2x00mac_get_stats,
+ .get_tkip_seq = rt2800_get_tkip_seq,
+ .set_rts_threshold = rt2800_set_rts_threshold,
+ .bss_info_changed = rt2x00mac_bss_info_changed,
+ .conf_tx = rt2800_conf_tx,
+ .get_tsf = rt2800_get_tsf,
+ .rfkill_poll = rt2x00mac_rfkill_poll,
+ .ampdu_action = rt2800_ampdu_action,
+};
+
static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
.irq_handler = rt2800pci_interrupt,
.irq_handler_thread = rt2800pci_interrupt_thread,
@@ -1152,7 +1174,7 @@ static const struct rt2x00_ops rt2800pci_ops = {
.tx = &rt2800pci_queue_tx,
.bcn = &rt2800pci_queue_bcn,
.lib = &rt2800pci_rt2x00_ops,
- .hw = &rt2800_mac80211_ops,
+ .hw = &rt2800pci_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
.debugfs = &rt2800_rt2x00debug,
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index df78e28..f8eb6d7 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -645,6 +645,28 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
return 0;
}
+static const struct ieee80211_ops rt2800usb_mac80211_ops = {
+ .tx = rt2x00mac_tx,
+ .start = rt2x00mac_start,
+ .stop = rt2x00mac_stop,
+ .add_interface = rt2x00mac_add_interface,
+ .remove_interface = rt2x00mac_remove_interface,
+ .config = rt2x00mac_config,
+ .configure_filter = rt2x00mac_configure_filter,
+ .set_tim = rt2x00mac_set_tim,
+ .set_key = rt2x00mac_set_key,
+ .sw_scan_start = rt2x00mac_sw_scan_start,
+ .sw_scan_complete = rt2x00mac_sw_scan_complete,
+ .get_stats = rt2x00mac_get_stats,
+ .get_tkip_seq = rt2800_get_tkip_seq,
+ .set_rts_threshold = rt2800_set_rts_threshold,
+ .bss_info_changed = rt2x00mac_bss_info_changed,
+ .conf_tx = rt2800_conf_tx,
+ .get_tsf = rt2800_get_tsf,
+ .rfkill_poll = rt2x00mac_rfkill_poll,
+ .ampdu_action = rt2800_ampdu_action,
+};
+
static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
.probe_hw = rt2800usb_probe_hw,
.get_firmware_name = rt2800usb_get_firmware_name,
@@ -708,7 +730,7 @@ static const struct rt2x00_ops rt2800usb_ops = {
.tx = &rt2800usb_queue_tx,
.bcn = &rt2800usb_queue_bcn,
.lib = &rt2800usb_rt2x00_ops,
- .hw = &rt2800_mac80211_ops,
+ .hw = &rt2800usb_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
.debugfs = &rt2800_rt2x00debug,
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
--
1.7.1.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 13/17] rt2x00: Remove set_tim callback from PCI drivers
2010-07-11 10:28 ` [PATCH 12/17] rt2x00: Use separate mac80211_ops for rt2800pci and rt2800usb Ivo van Doorn
@ 2010-07-11 10:29 ` Ivo van Doorn
2010-07-11 10:29 ` [PATCH 14/17] rt2x00: Don't initialize beacon interval to 0 on rt2800 devices Ivo van Doorn
0 siblings, 1 reply; 17+ messages in thread
From: Ivo van Doorn @ 2010-07-11 10:29 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, users, Helmut Schaa
From: Helmut Schaa <helmut.schaa@googlemail.com>
Using the set_tim callback without managing the DTIM count and the
broad- and multicast buffering in hw, fw or the driver results in wrong
DTIM count values being sent out in beacons. Since all PCI drivers
fetch new beacons periodically and hence get an updated TIM we can just
remove the set_tim callback from these.
The rt2x00 USB drivers don't update the beacon periodically and thus
rely on the set_tim callback to get a correct TIM for beacon
transmission. USB devices still suffer from the DTIM count being wrong
under some circumstances but removing the set_tim callback from these
would cause more harm then good.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 1 -
drivers/net/wireless/rt2x00/rt2500pci.c | 1 -
drivers/net/wireless/rt2x00/rt2800pci.c | 1 -
drivers/net/wireless/rt2x00/rt61pci.c | 1 -
4 files changed, 0 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 116244b..5063e01 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1589,7 +1589,6 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = {
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.configure_filter = rt2x00mac_configure_filter,
- .set_tim = rt2x00mac_set_tim,
.sw_scan_start = rt2x00mac_sw_scan_start,
.sw_scan_complete = rt2x00mac_sw_scan_complete,
.get_stats = rt2x00mac_get_stats,
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 5e80948..c2a555d 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1883,7 +1883,6 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.configure_filter = rt2x00mac_configure_filter,
- .set_tim = rt2x00mac_set_tim,
.sw_scan_start = rt2x00mac_sw_scan_start,
.sw_scan_complete = rt2x00mac_sw_scan_complete,
.get_stats = rt2x00mac_get_stats,
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 4c138eb..520236d 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1096,7 +1096,6 @@ static const struct ieee80211_ops rt2800pci_mac80211_ops = {
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.configure_filter = rt2x00mac_configure_filter,
- .set_tim = rt2x00mac_set_tim,
.set_key = rt2x00mac_set_key,
.sw_scan_start = rt2x00mac_sw_scan_start,
.sw_scan_complete = rt2x00mac_sw_scan_complete,
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 049433f..e539c6c 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2805,7 +2805,6 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.configure_filter = rt2x00mac_configure_filter,
- .set_tim = rt2x00mac_set_tim,
.set_key = rt2x00mac_set_key,
.sw_scan_start = rt2x00mac_sw_scan_start,
.sw_scan_complete = rt2x00mac_sw_scan_complete,
--
1.7.1.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 14/17] rt2x00: Don't initialize beacon interval to 0 on rt2800 devices
2010-07-11 10:29 ` [PATCH 13/17] rt2x00: Remove set_tim callback from PCI drivers Ivo van Doorn
@ 2010-07-11 10:29 ` Ivo van Doorn
2010-07-11 10:30 ` [PATCH 15/17] rt2x00: Add missing TSF sync mode for AP operation Ivo van Doorn
0 siblings, 1 reply; 17+ messages in thread
From: Ivo van Doorn @ 2010-07-11 10:29 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, users, Helmut Schaa
From: Helmut Schaa <helmut.schaa@googlemail.com>
Activating the TBTT interrupt when a beacon interval of 0 is configured
results in an interrupt storm causing the machine to hang. Hence,
initialize the beacon interval to a reasonable default of 100TUs.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 64bfa6e..cfe199b 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1419,7 +1419,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®);
- rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 0);
+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 1600);
rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0);
rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0);
rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0);
--
1.7.1.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 15/17] rt2x00: Add missing TSF sync mode for AP operation
2010-07-11 10:29 ` [PATCH 14/17] rt2x00: Don't initialize beacon interval to 0 on rt2800 devices Ivo van Doorn
@ 2010-07-11 10:30 ` Ivo van Doorn
2010-07-11 10:30 ` [PATCH 16/17] rt2x00: Move common firmware loading into rt2800lib Ivo van Doorn
0 siblings, 1 reply; 17+ messages in thread
From: Ivo van Doorn @ 2010-07-11 10:30 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, users, Helmut Schaa
From: Helmut Schaa <helmut.schaa@googlemail.com>
Currently rt2x00 uses the TSF_SYNC_BEACON mode for all beaconing
interface types. However, TSF_SYNC_BEACON is meant for IBSS networks and
thus implements TSF merging in the hardware. Rename TSF_SYNC_BEACON to
TSF_SYNC_ADHOC to better express its purpose and introduce the missing
TSF sync mode TSF_SYNC_AP_NONE which should be used for beaconing modes
that don't need TSF merging.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 5 +++--
drivers/net/wireless/rt2x00/rt2x00config.c | 4 +++-
drivers/net/wireless/rt2x00/rt2x00reg.h | 3 ++-
3 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index cfe199b..9587236 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -805,7 +805,8 @@ void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync);
rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE,
- (conf->sync == TSF_SYNC_BEACON));
+ (conf->sync == TSF_SYNC_ADHOC ||
+ conf->sync == TSF_SYNC_AP_NONE));
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
/*
@@ -813,7 +814,7 @@ void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
*/
rt2800_register_read(rt2x00dev, INT_TIMER_EN, ®);
rt2x00_set_field32(®, INT_TIMER_EN_PRE_TBTT_TIMER,
- (conf->sync == TSF_SYNC_BEACON));
+ (conf->sync == TSF_SYNC_AP_NONE));
rt2800_register_write(rt2x00dev, INT_TIMER_EN, reg);
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 8dbd634..953dc4f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -41,10 +41,12 @@ void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev,
switch (type) {
case NL80211_IFTYPE_ADHOC:
+ conf.sync = TSF_SYNC_ADHOC;
+ break;
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_WDS:
- conf.sync = TSF_SYNC_BEACON;
+ conf.sync = TSF_SYNC_AP_NONE;
break;
case NL80211_IFTYPE_STATION:
conf.sync = TSF_SYNC_INFRA;
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index 055501c..cef9462 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -63,7 +63,8 @@ enum led_mode {
enum tsf_sync {
TSF_SYNC_NONE = 0,
TSF_SYNC_INFRA = 1,
- TSF_SYNC_BEACON = 2,
+ TSF_SYNC_ADHOC = 2,
+ TSF_SYNC_AP_NONE = 3,
};
/*
--
1.7.1.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 16/17] rt2x00: Move common firmware loading into rt2800lib
2010-07-11 10:30 ` [PATCH 15/17] rt2x00: Add missing TSF sync mode for AP operation Ivo van Doorn
@ 2010-07-11 10:30 ` Ivo van Doorn
2010-07-11 10:31 ` [PATCH 17/17] rt2x00: Move driver callback functions into the ops structure Ivo van Doorn
0 siblings, 1 reply; 17+ messages in thread
From: Ivo van Doorn @ 2010-07-11 10:30 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, users, Helmut Schaa
Large parts of the firmware initialization are shared
between rt2800pci and rt2800usb. Move this code into
rt2800lib.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 155 +++++++++++++++++++++++++++++++
drivers/net/wireless/rt2x00/rt2800lib.h | 15 +++
drivers/net/wireless/rt2x00/rt2800pci.c | 101 +-------------------
drivers/net/wireless/rt2x00/rt2800usb.c | 119 +-----------------------
4 files changed, 179 insertions(+), 211 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 9587236..b66e0fd 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -33,6 +33,7 @@
Abstract: rt2800 generic device routines.
*/
+#include <linux/crc-ccitt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -272,6 +273,160 @@ int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
}
EXPORT_SYMBOL_GPL(rt2800_wait_wpdma_ready);
+static bool rt2800_check_firmware_crc(const u8 *data, const size_t len)
+{
+ u16 fw_crc;
+ u16 crc;
+
+ /*
+ * The last 2 bytes in the firmware array are the crc checksum itself,
+ * this means that we should never pass those 2 bytes to the crc
+ * algorithm.
+ */
+ fw_crc = (data[len - 2] << 8 | data[len - 1]);
+
+ /*
+ * Use the crc ccitt algorithm.
+ * This will return the same value as the legacy driver which
+ * used bit ordering reversion on the both the firmware bytes
+ * before input input as well as on the final output.
+ * Obviously using crc ccitt directly is much more efficient.
+ */
+ crc = crc_ccitt(~0, data, len - 2);
+
+ /*
+ * There is a small difference between the crc-itu-t + bitrev and
+ * the crc-ccitt crc calculation. In the latter method the 2 bytes
+ * will be swapped, use swab16 to convert the crc to the correct
+ * value.
+ */
+ crc = swab16(crc);
+
+ return fw_crc == crc;
+}
+
+int rt2800_check_firmware(struct rt2x00_dev *rt2x00dev,
+ const u8 *data, const size_t len)
+{
+ size_t offset = 0;
+ size_t fw_len;
+ bool multiple;
+
+ /*
+ * PCI(e) & SOC devices require firmware with a length
+ * of 8kb. USB devices require firmware files with a length
+ * of 4kb. Certain USB chipsets however require different firmware,
+ * which Ralink only provides attached to the original firmware
+ * file. Thus for USB devices, firmware files have a length
+ * which is a multiple of 4kb.
+ */
+ if (rt2x00_is_usb(rt2x00dev)) {
+ fw_len = 4096;
+ multiple = true;
+ } else {
+ fw_len = 8192;
+ multiple = true;
+ }
+
+ /*
+ * Validate the firmware length
+ */
+ if (len != fw_len && (!multiple || (len % fw_len) != 0))
+ return FW_BAD_LENGTH;
+
+ /*
+ * Check if the chipset requires one of the upper parts
+ * of the firmware.
+ */
+ if (rt2x00_is_usb(rt2x00dev) &&
+ !rt2x00_rt(rt2x00dev, RT2860) &&
+ !rt2x00_rt(rt2x00dev, RT2872) &&
+ !rt2x00_rt(rt2x00dev, RT3070) &&
+ ((len / fw_len) == 1))
+ return FW_BAD_VERSION;
+
+ /*
+ * 8kb firmware files must be checked as if it were
+ * 2 separate firmware files.
+ */
+ while (offset < len) {
+ if (!rt2800_check_firmware_crc(data + offset, fw_len))
+ return FW_BAD_CRC;
+
+ offset += fw_len;
+ }
+
+ return FW_OK;
+}
+EXPORT_SYMBOL_GPL(rt2800_check_firmware);
+
+int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
+ const u8 *data, const size_t len)
+{
+ unsigned int i;
+ u32 reg;
+
+ /*
+ * Wait for stable hardware.
+ */
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ rt2800_register_read(rt2x00dev, MAC_CSR0, ®);
+ if (reg && reg != ~0)
+ break;
+ msleep(1);
+ }
+
+ if (i == REGISTER_BUSY_COUNT) {
+ ERROR(rt2x00dev, "Unstable hardware.\n");
+ return -EBUSY;
+ }
+
+ if (rt2x00_is_pci(rt2x00dev))
+ rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002);
+
+ /*
+ * Disable DMA, will be reenabled later when enabling
+ * the radio.
+ */
+ rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
+ rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+ /*
+ * Write firmware to the device.
+ */
+ rt2800_drv_write_firmware(rt2x00dev, data, len);
+
+ /*
+ * Wait for device to stabilize.
+ */
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
+ if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
+ break;
+ msleep(1);
+ }
+
+ if (i == REGISTER_BUSY_COUNT) {
+ ERROR(rt2x00dev, "PBF system register not ready.\n");
+ return -EBUSY;
+ }
+
+ /*
+ * Initialize firmware.
+ */
+ rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+ rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+ msleep(1);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_load_firmware);
+
void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc)
{
u32 word;
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 10f8f2f..cecbd3a 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -41,6 +41,8 @@ struct rt2800_ops {
const unsigned int offset,
const struct rt2x00_field32 field, u32 *reg);
+ int (*drv_write_firmware)(struct rt2x00_dev *rt2x00dev,
+ const u8 *data, const size_t len);
int (*drv_init_registers)(struct rt2x00_dev *rt2x00dev);
};
@@ -109,6 +111,14 @@ static inline int rt2800_regbusy_read(struct rt2x00_dev *rt2x00dev,
return rt2800ops->regbusy_read(rt2x00dev, offset, field, reg);
}
+static inline int rt2800_drv_write_firmware(struct rt2x00_dev *rt2x00dev,
+ const u8 *data, const size_t len)
+{
+ const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+
+ return rt2800ops->drv_write_firmware(rt2x00dev, data, len);
+}
+
static inline int rt2800_drv_init_registers(struct rt2x00_dev *rt2x00dev)
{
const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
@@ -120,6 +130,11 @@ void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
const u8 command, const u8 token,
const u8 arg0, const u8 arg1);
+int rt2800_check_firmware(struct rt2x00_dev *rt2x00dev,
+ const u8 *data, const size_t len);
+int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
+ const u8 *data, const size_t len);
+
void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc);
void rt2800_process_rxwi(struct queue_entry *entry, struct rxdone_entry_desc *txdesc);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 520236d..0fdd58b 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -31,7 +31,6 @@
Supported chipsets: RT2800E & RT2800ED.
*/
-#include <linux/crc-ccitt.h>
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
@@ -192,82 +191,14 @@ static char *rt2800pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
return FIRMWARE_RT2860;
}
-static int rt2800pci_check_firmware(struct rt2x00_dev *rt2x00dev,
+static int rt2800pci_write_firmware(struct rt2x00_dev *rt2x00dev,
const u8 *data, const size_t len)
{
- u16 fw_crc;
- u16 crc;
-
- /*
- * Only support 8kb firmware files.
- */
- if (len != 8192)
- return FW_BAD_LENGTH;
-
- /*
- * The last 2 bytes in the firmware array are the crc checksum itself,
- * this means that we should never pass those 2 bytes to the crc
- * algorithm.
- */
- fw_crc = (data[len - 2] << 8 | data[len - 1]);
-
- /*
- * Use the crc ccitt algorithm.
- * This will return the same value as the legacy driver which
- * used bit ordering reversion on the both the firmware bytes
- * before input input as well as on the final output.
- * Obviously using crc ccitt directly is much more efficient.
- */
- crc = crc_ccitt(~0, data, len - 2);
-
- /*
- * There is a small difference between the crc-itu-t + bitrev and
- * the crc-ccitt crc calculation. In the latter method the 2 bytes
- * will be swapped, use swab16 to convert the crc to the correct
- * value.
- */
- crc = swab16(crc);
-
- return (fw_crc == crc) ? FW_OK : FW_BAD_CRC;
-}
-
-static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev,
- const u8 *data, const size_t len)
-{
- unsigned int i;
u32 reg;
- /*
- * Wait for stable hardware.
- */
- for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
- rt2800_register_read(rt2x00dev, MAC_CSR0, ®);
- if (reg && reg != ~0)
- break;
- msleep(1);
- }
-
- if (i == REGISTER_BUSY_COUNT) {
- ERROR(rt2x00dev, "Unstable hardware.\n");
- return -EBUSY;
- }
-
- rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002);
rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000);
/*
- * Disable DMA, will be reenabled later when enabling
- * the radio.
- */
- rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
- rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-
- /*
* enable Host program ram write selection
*/
reg = 0;
@@ -278,34 +209,11 @@ static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev,
* Write firmware to device.
*/
rt2800_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
- data, len);
+ data, len);
rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000);
rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001);
- /*
- * Wait for device to stabilize.
- */
- for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
- rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
- if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
- break;
- msleep(1);
- }
-
- if (i == REGISTER_BUSY_COUNT) {
- ERROR(rt2x00dev, "PBF system register not ready.\n");
- return -EBUSY;
- }
-
- /*
- * Disable interrupts
- */
- rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF);
-
- /*
- * Initialize BBP R/W access agent
- */
rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
@@ -1029,6 +937,7 @@ static const struct rt2800_ops rt2800pci_rt2800_ops = {
.regbusy_read = rt2x00pci_regbusy_read,
+ .drv_write_firmware = rt2800pci_write_firmware,
.drv_init_registers = rt2800pci_init_registers,
};
@@ -1114,8 +1023,8 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
.irq_handler_thread = rt2800pci_interrupt_thread,
.probe_hw = rt2800pci_probe_hw,
.get_firmware_name = rt2800pci_get_firmware_name,
- .check_firmware = rt2800pci_check_firmware,
- .load_firmware = rt2800pci_load_firmware,
+ .check_firmware = rt2800_check_firmware,
+ .load_firmware = rt2800_load_firmware,
.initialize = rt2x00pci_initialize,
.uninitialize = rt2x00pci_uninitialize,
.get_entry_state = rt2800pci_get_entry_state,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index f8eb6d7..7b8d51f 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -28,7 +28,6 @@
Supported chipsets: RT2800U.
*/
-#include <linux/crc-ccitt.h>
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
@@ -57,84 +56,10 @@ static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
return FIRMWARE_RT2870;
}
-static bool rt2800usb_check_crc(const u8 *data, const size_t len)
-{
- u16 fw_crc;
- u16 crc;
-
- /*
- * The last 2 bytes in the firmware array are the crc checksum itself,
- * this means that we should never pass those 2 bytes to the crc
- * algorithm.
- */
- fw_crc = (data[len - 2] << 8 | data[len - 1]);
-
- /*
- * Use the crc ccitt algorithm.
- * This will return the same value as the legacy driver which
- * used bit ordering reversion on the both the firmware bytes
- * before input input as well as on the final output.
- * Obviously using crc ccitt directly is much more efficient.
- */
- crc = crc_ccitt(~0, data, len - 2);
-
- /*
- * There is a small difference between the crc-itu-t + bitrev and
- * the crc-ccitt crc calculation. In the latter method the 2 bytes
- * will be swapped, use swab16 to convert the crc to the correct
- * value.
- */
- crc = swab16(crc);
-
- return fw_crc == crc;
-}
-
-static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
+static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev,
const u8 *data, const size_t len)
{
- size_t offset = 0;
-
- /*
- * Firmware files:
- * There are 2 variations of the rt2870 firmware.
- * a) size: 4kb
- * b) size: 8kb
- * Note that (b) contains 2 separate firmware blobs of 4k
- * within the file. The first blob is the same firmware as (a),
- * but the second blob is for the additional chipsets.
- */
- if (len != 4096 && len != 8192)
- return FW_BAD_LENGTH;
-
- /*
- * Check if we need the upper 4kb firmware data or not.
- */
- if ((len == 4096) &&
- !rt2x00_rt(rt2x00dev, RT2860) &&
- !rt2x00_rt(rt2x00dev, RT2872) &&
- !rt2x00_rt(rt2x00dev, RT3070))
- return FW_BAD_VERSION;
-
- /*
- * 8kb firmware files must be checked as if it were
- * 2 separate firmware files.
- */
- while (offset < len) {
- if (!rt2800usb_check_crc(data + offset, 4096))
- return FW_BAD_CRC;
-
- offset += 4096;
- }
-
- return FW_OK;
-}
-
-static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
- const u8 *data, const size_t len)
-{
- unsigned int i;
int status;
- u32 reg;
u32 offset;
u32 length;
@@ -152,21 +77,6 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
}
/*
- * Wait for stable hardware.
- */
- for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
- rt2800_register_read(rt2x00dev, MAC_CSR0, ®);
- if (reg && reg != ~0)
- break;
- msleep(1);
- }
-
- if (i == REGISTER_BUSY_COUNT) {
- ERROR(rt2x00dev, "Unstable hardware.\n");
- return -EBUSY;
- }
-
- /*
* Write firmware to device.
*/
rt2800_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
@@ -203,28 +113,6 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
udelay(10);
}
- /*
- * Wait for device to stabilize.
- */
- for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
- rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
- if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
- break;
- msleep(1);
- }
-
- if (i == REGISTER_BUSY_COUNT) {
- ERROR(rt2x00dev, "PBF system register not ready.\n");
- return -EBUSY;
- }
-
- /*
- * Initialize firmware.
- */
- rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
- rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
- msleep(1);
-
return 0;
}
@@ -593,6 +481,7 @@ static const struct rt2800_ops rt2800usb_rt2800_ops = {
.regbusy_read = rt2x00usb_regbusy_read,
+ .drv_write_firmware = rt2800usb_write_firmware,
.drv_init_registers = rt2800usb_init_registers,
};
@@ -670,8 +559,8 @@ static const struct ieee80211_ops rt2800usb_mac80211_ops = {
static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
.probe_hw = rt2800usb_probe_hw,
.get_firmware_name = rt2800usb_get_firmware_name,
- .check_firmware = rt2800usb_check_firmware,
- .load_firmware = rt2800usb_load_firmware,
+ .check_firmware = rt2800_check_firmware,
+ .load_firmware = rt2800_load_firmware,
.initialize = rt2x00usb_initialize,
.uninitialize = rt2x00usb_uninitialize,
.clear_entry = rt2x00usb_clear_entry,
--
1.7.1.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 17/17] rt2x00: Move driver callback functions into the ops structure
2010-07-11 10:30 ` [PATCH 16/17] rt2x00: Move common firmware loading into rt2800lib Ivo van Doorn
@ 2010-07-11 10:31 ` Ivo van Doorn
0 siblings, 0 replies; 17+ messages in thread
From: Ivo van Doorn @ 2010-07-11 10:31 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, users, Helmut Schaa
All callback functions are gathered in rt2x00dev->ops except
for the callback functions which are used in rt2800lib to
acces rt2800pci/usb.
Move the priv pointer from rt2x00dev to rt2x00dev->ops and
rename it to drv to make it obvious that it is the driver callback
structure.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800lib.h | 18 +++++++++---------
drivers/net/wireless/rt2x00/rt2800pci.c | 30 +++++++++++++-----------------
drivers/net/wireless/rt2x00/rt2800usb.c | 30 +++++++++++++-----------------
drivers/net/wireless/rt2x00/rt2x00.h | 6 +-----
4 files changed, 36 insertions(+), 48 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index cecbd3a..091641e 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -50,7 +50,7 @@ static inline void rt2800_register_read(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
u32 *value)
{
- const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+ const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
rt2800ops->register_read(rt2x00dev, offset, value);
}
@@ -59,7 +59,7 @@ static inline void rt2800_register_read_lock(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
u32 *value)
{
- const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+ const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
rt2800ops->register_read_lock(rt2x00dev, offset, value);
}
@@ -68,7 +68,7 @@ static inline void rt2800_register_write(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
u32 value)
{
- const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+ const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
rt2800ops->register_write(rt2x00dev, offset, value);
}
@@ -77,7 +77,7 @@ static inline void rt2800_register_write_lock(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
u32 value)
{
- const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+ const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
rt2800ops->register_write_lock(rt2x00dev, offset, value);
}
@@ -86,7 +86,7 @@ static inline void rt2800_register_multiread(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
void *value, const u32 length)
{
- const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+ const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
rt2800ops->register_multiread(rt2x00dev, offset, value, length);
}
@@ -96,7 +96,7 @@ static inline void rt2800_register_multiwrite(struct rt2x00_dev *rt2x00dev,
const void *value,
const u32 length)
{
- const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+ const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
rt2800ops->register_multiwrite(rt2x00dev, offset, value, length);
}
@@ -106,7 +106,7 @@ static inline int rt2800_regbusy_read(struct rt2x00_dev *rt2x00dev,
const struct rt2x00_field32 field,
u32 *reg)
{
- const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+ const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
return rt2800ops->regbusy_read(rt2x00dev, offset, field, reg);
}
@@ -114,14 +114,14 @@ static inline int rt2800_regbusy_read(struct rt2x00_dev *rt2x00dev,
static inline int rt2800_drv_write_firmware(struct rt2x00_dev *rt2x00dev,
const u8 *data, const size_t len)
{
- const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+ const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
return rt2800ops->drv_write_firmware(rt2x00dev, data, len);
}
static inline int rt2800_drv_init_registers(struct rt2x00_dev *rt2x00dev)
{
- const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+ const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
return rt2800ops->drv_init_registers(rt2x00dev);
}
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 0fdd58b..39b3846 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -926,27 +926,10 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
return rt2800_validate_eeprom(rt2x00dev);
}
-static const struct rt2800_ops rt2800pci_rt2800_ops = {
- .register_read = rt2x00pci_register_read,
- .register_read_lock = rt2x00pci_register_read, /* same for PCI */
- .register_write = rt2x00pci_register_write,
- .register_write_lock = rt2x00pci_register_write, /* same for PCI */
-
- .register_multiread = rt2x00pci_register_multiread,
- .register_multiwrite = rt2x00pci_register_multiwrite,
-
- .regbusy_read = rt2x00pci_regbusy_read,
-
- .drv_write_firmware = rt2800pci_write_firmware,
- .drv_init_registers = rt2800pci_init_registers,
-};
-
static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
- rt2x00dev->priv = (void *)&rt2800pci_rt2800_ops;
-
/*
* Allocate eeprom data.
*/
@@ -1018,6 +1001,18 @@ static const struct ieee80211_ops rt2800pci_mac80211_ops = {
.ampdu_action = rt2800_ampdu_action,
};
+static const struct rt2800_ops rt2800pci_rt2800_ops = {
+ .register_read = rt2x00pci_register_read,
+ .register_read_lock = rt2x00pci_register_read, /* same for PCI */
+ .register_write = rt2x00pci_register_write,
+ .register_write_lock = rt2x00pci_register_write, /* same for PCI */
+ .register_multiread = rt2x00pci_register_multiread,
+ .register_multiwrite = rt2x00pci_register_multiwrite,
+ .regbusy_read = rt2x00pci_regbusy_read,
+ .drv_write_firmware = rt2800pci_write_firmware,
+ .drv_init_registers = rt2800pci_init_registers,
+};
+
static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
.irq_handler = rt2800pci_interrupt,
.irq_handler_thread = rt2800pci_interrupt_thread,
@@ -1082,6 +1077,7 @@ static const struct rt2x00_ops rt2800pci_ops = {
.tx = &rt2800pci_queue_tx,
.bcn = &rt2800pci_queue_bcn,
.lib = &rt2800pci_rt2x00_ops,
+ .drv = &rt2800pci_rt2800_ops,
.hw = &rt2800pci_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
.debugfs = &rt2800_rt2x00debug,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 7b8d51f..5a2dfe8 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -470,27 +470,10 @@ static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
return rt2800_validate_eeprom(rt2x00dev);
}
-static const struct rt2800_ops rt2800usb_rt2800_ops = {
- .register_read = rt2x00usb_register_read,
- .register_read_lock = rt2x00usb_register_read_lock,
- .register_write = rt2x00usb_register_write,
- .register_write_lock = rt2x00usb_register_write_lock,
-
- .register_multiread = rt2x00usb_register_multiread,
- .register_multiwrite = rt2x00usb_register_multiwrite,
-
- .regbusy_read = rt2x00usb_regbusy_read,
-
- .drv_write_firmware = rt2800usb_write_firmware,
- .drv_init_registers = rt2800usb_init_registers,
-};
-
static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
- rt2x00dev->priv = (void *)&rt2800usb_rt2800_ops;
-
/*
* Allocate eeprom data.
*/
@@ -556,6 +539,18 @@ static const struct ieee80211_ops rt2800usb_mac80211_ops = {
.ampdu_action = rt2800_ampdu_action,
};
+static const struct rt2800_ops rt2800usb_rt2800_ops = {
+ .register_read = rt2x00usb_register_read,
+ .register_read_lock = rt2x00usb_register_read_lock,
+ .register_write = rt2x00usb_register_write,
+ .register_write_lock = rt2x00usb_register_write_lock,
+ .register_multiread = rt2x00usb_register_multiread,
+ .register_multiwrite = rt2x00usb_register_multiwrite,
+ .regbusy_read = rt2x00usb_regbusy_read,
+ .drv_write_firmware = rt2800usb_write_firmware,
+ .drv_init_registers = rt2800usb_init_registers,
+};
+
static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
.probe_hw = rt2800usb_probe_hw,
.get_firmware_name = rt2800usb_get_firmware_name,
@@ -619,6 +614,7 @@ static const struct rt2x00_ops rt2800usb_ops = {
.tx = &rt2800usb_queue_tx,
.bcn = &rt2800usb_queue_bcn,
.lib = &rt2800usb_rt2x00_ops,
+ .drv = &rt2800usb_rt2800_ops,
.hw = &rt2800usb_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
.debugfs = &rt2800_rt2x00debug,
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 9dd0d17..c21af38 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -621,6 +621,7 @@ struct rt2x00_ops {
const struct data_queue_desc *bcn;
const struct data_queue_desc *atim;
const struct rt2x00lib_ops *lib;
+ const void *drv;
const struct ieee80211_ops *hw;
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
const struct rt2x00debug *debugfs;
@@ -881,11 +882,6 @@ struct rt2x00_dev {
* and interrupt thread routine.
*/
u32 irqvalue[2];
-
- /*
- * Driver specific data.
- */
- void *priv;
};
/*
--
1.7.1.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
end of thread, other threads:[~2010-07-11 10:32 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-07-11 10:23 [PATCH 01/17] rt2x00: Limit txpower by eeprom values Ivo van Doorn
2010-07-11 10:23 ` [PATCH 02/17] rt2x00: Convert AGC value from descriptor to RSSI (dBm) Ivo van Doorn
2010-07-11 10:24 ` [PATCH 03/17] rt2x00: Rename CONFIG_DISABLE_LINK_TUNING Ivo van Doorn
2010-07-11 10:24 ` [PATCH 04/17] rt2x00: Disable link tuning while scanning Ivo van Doorn
2010-07-11 10:25 ` [PATCH 05/17] rt2x00: Fix vgc_level_reg handling Ivo van Doorn
2010-07-11 10:25 ` [PATCH 06/17] rt2x00: Implement watchdog monitoring Ivo van Doorn
2010-07-11 10:26 ` [PATCH 07/17] rt2x00: Make rt2800_write_beacon only export to GPL Ivo van Doorn
2010-07-11 10:26 ` [PATCH 08/17] rt2x00: Convert rt2x00 to use threaded interrupts Ivo van Doorn
2010-07-11 10:27 ` [PATCH 09/17] rt2x00: Allow beacon update without scheduling a work Ivo van Doorn
2010-07-11 10:27 ` [PATCH 10/17] rt2x00: Implement broad- and multicast buffering Ivo van Doorn
2010-07-11 10:28 ` [PATCH 11/17] rt2x00: Use pretbtt irq for fetching beacons on rt2800pci Ivo van Doorn
2010-07-11 10:28 ` [PATCH 12/17] rt2x00: Use separate mac80211_ops for rt2800pci and rt2800usb Ivo van Doorn
2010-07-11 10:29 ` [PATCH 13/17] rt2x00: Remove set_tim callback from PCI drivers Ivo van Doorn
2010-07-11 10:29 ` [PATCH 14/17] rt2x00: Don't initialize beacon interval to 0 on rt2800 devices Ivo van Doorn
2010-07-11 10:30 ` [PATCH 15/17] rt2x00: Add missing TSF sync mode for AP operation Ivo van Doorn
2010-07-11 10:30 ` [PATCH 16/17] rt2x00: Move common firmware loading into rt2800lib Ivo van Doorn
2010-07-11 10:31 ` [PATCH 17/17] rt2x00: Move driver callback functions into the ops structure Ivo van Doorn
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.