* matroxfb - wrong PLL calculation for Mystique and Mystique 220
@ 2010-08-06 15:35 Ondrej Zary
0 siblings, 0 replies; only message in thread
From: Ondrej Zary @ 2010-08-06 15:35 UTC (permalink / raw)
To: linux-fbdev
Hello,
there is a long-standing problem in matroxfb (and also with xf86-video-mga)
with PLL values calculation. It results in "wavy" vertical lines at least on
Mystique and Mystique 220, especially where dotted horizontal lines are
displayed.
On non-220 Mystique in 1024x768@85Hz, matroxfb calculates:
m=0x0f, n=0x69, p=0x00 (producing wavy vertical lines)
Windows driver calculates:
m=0x03, n=0x34, p=0x01 (producing straight vertical lines)
The resulting f_vco from windows values is 189713.5, which is above max_freq
for this card. So it looks like the assumption that f_vco must be less
or equal to max_freq is wrong. Could someone with access to MGA1064/1164
documentation look into this?
xf86-video-mga bug (with photos of the screen):
http://bugs.xfree86.org/show_bug.cgi?id\x1314
--
Ondrej Zary
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-08-06 15:35 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-08-06 15:35 matroxfb - wrong PLL calculation for Mystique and Mystique 220 Ondrej Zary
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.