* [Bug 30076] Corrupted 3D window with Tiling enabled.
2010-09-08 5:34 [Bug 30076] New: Corrupted 3D window with Tiling enabled bugzilla-daemon
@ 2010-09-08 5:35 ` bugzilla-daemon
2010-09-08 5:36 ` bugzilla-daemon
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: bugzilla-daemon @ 2010-09-08 5:35 UTC (permalink / raw)
To: dri-devel
https://bugs.freedesktop.org/show_bug.cgi?id=30076
--- Comment #1 from Mathieu Belanger <b747xx@gmail.com> 2010-09-07 22:35:23 PDT ---
Initializing cgroup subsys cpuset
Linux version 2.6.36-rc3-NX1-dirty (root@tanith) (gcc version 4.4.3 (Gentoo
4.4.3 p1.0) ) #4 SMP PREEMPT Tue Sep 7 19:31:22 EDT 2010
Command line: root=/dev/sda2 memory_corruption_check=0 clocksource=hpet
radeon.modeset=1
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable)
BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS)
BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data)
BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x430000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CFE00000 mask FFFFFFE00000 uncachable
4 base 000100000000 mask FFFF00000000 write-back
5 base 000200000000 mask FFFE00000000 write-back
6 base 000400000000 mask FFFFE0000000 write-back
7 base 000420000000 mask FFFFF0000000 write-back
TOM2: 0000000430000000 aka 17152M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfde0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000f58d0] f58d0
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cfde0000
0000000000 - 00c0000000 page 1G
00c0000000 - 00cfc00000 page 2M
00cfc00000 - 00cfde0000 page 4k
kernel direct mapping tables up to cfde0000 @ 8000-b000
init_memory_mapping: 0000000100000000-0000000430000000
0100000000 - 0400000000 page 1G
0400000000 - 0430000000 page 2M
kernel direct mapping tables up to 430000000 @ a000-c000
ACPI: RSDP 00000000000f7270 00014 (v00 GBT )
ACPI: RSDT 00000000cfde3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfde30c0 07299 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfde0000 00040
ACPI: SSDT 00000000cfdea440 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: HPET 00000000cfdead00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfdead40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: TAMG 00000000cfdead80 0030A (v01 GBT GBT B0 5455312E BG?? 53450101)
ACPI: APIC 00000000cfdea380 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
(12/32 early reservations) ==> bootmem [0000000000 - 0430000000]
#0 [0001000000 - 00018f39a4] TEXT DATA BSS ==> [0001000000 - 00018f39a4]
#1 [00018f4000 - 00018f40fe] BRK ==> [00018f4000 - 00018f40fe]
#2 [00000f58e0 - 0000100000] BIOS reserved ==> [00000f58e0 - 0000100000]
#3 [00000f58d0 - 00000f58e0] MP-table mpf ==> [00000f58d0 - 00000f58e0]
#4 [000009f800 - 00000f0f00] BIOS reserved ==> [000009f800 - 00000f0f00]
#5 [00000f108c - 00000f58d0] BIOS reserved ==> [00000f108c - 00000f58d0]
#6 [00000f0f00 - 00000f108c] MP-table mpc ==> [00000f0f00 - 00000f108c]
#7 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
#8 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
#9 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#10 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
#11 [000000b000 - 0000091000] BOOTMAP ==> [000000b000 - 0000091000]
[ffffea0000000000-ffffea000ebfffff] PMD -> [ffff880028a00000-ffff880036bfffff]
on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00430000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x000cfde0
0: 0x00100000 -> 0x00430000
On node 0 totalpages: 4193662
DMA zone: 56 pages used for memmap
DMA zone: 238 pages reserved
DMA zone: 3704 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833048 pages, LIFO batch:31
Normal zone: 45696 pages used for memmap
Normal zone: 3296640 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff880028200000 s78016 r8192 d24384 u524288
pcpu-alloc: s78016 r8192 d24384 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4133392
Kernel command line: root=/dev/sda2 memory_corruption_check=0 clocksource=hpet
radeon.modeset=1
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 20000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
Memory: 16377252k/17563648k available (4466k kernel code, 789000k absent,
397396k reserved, 1957k data, 444k init)
Hierarchical RCU implementation.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:384
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3220.365 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency..
6440.72 BogoMIPS (lpj=3220361)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
tseg: 00cfe00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
ACPI: Core revision 20100702
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 925 Processor stepping 02
System has AMD C1E enabled
Switch to broadcast mode on CPU0
Booting Node 0, Processors #1
Switch to broadcast mode on CPU1
#2
Switch to broadcast mode on CPU2
#3 Ok.
Brought up 4 CPUs
Switch to broadcast mode on CPU3
Total of 4 processors activated (25760.59 BogoMIPS).
xor: automatically using best checksumming function: generic_sse
generic_sse: 12760.000 MB/sec
xor: using function: generic_sse (12760.000 MB/sec)
NET: Registered protocol family 16
node 0 link 0: io port [c000, ffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [e0000000, e00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
TOM2: 0000000430000000 aka 17152M
bus: [00, 03] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
bus: 00 index 3 [mem 0xe0400000-0xffffffff]
bus: 00 index 4 [mem 0xe0100000-0xe03fffff]
bus: 00 index 5 [mem 0x430000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
raid6: int64x1 2808 MB/s
raid6: int64x2 3609 MB/s
raid6: int64x4 2828 MB/s
raid6: int64x8 2746 MB/s
raid6: sse2x1 4300 MB/s
raid6: sse2x2 7082 MB/s
raid6: sse2x4 7652 MB/s
raid6: using algorithm sse2x4 (7652 MB/s)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and
report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff]
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfdee0000-0xfdeeffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10: [mem 0xfdefc000-0xfdefffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff]
pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:03:06.0: reg 10: [io 0xcf00-0xcf1f]
pci 0000:03:06.0: supports D1 D2
pci 0000:03:06.1: reg 10: [io 0xce00-0xce07]
pci 0000:03:06.1: supports D1 D2
pci 0000:03:0e.0: reg 10: [mem 0xfddff000-0xfddff7ff]
pci 0000:03:0e.0: reg 14: [mem 0xfddf8000-0xfddfbfff]
pci 0000:03:0e.0: supports D1 D2
pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:0e.0: PME# disabled
pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive
decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive
decode)
pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff] (subtractive
decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
Unable to assume PCIe control: Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff
64bit]
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 00000000cfde0000 - 00000000cfffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps
0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it
overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it
overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
pnp 00:0a: disabling [mem 0x000d1c00-0x000d3fff] because it overlaps
0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x000f0000-0x000f7fff] because it overlaps
0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because it overlaps
0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because it overlaps
0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps
0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x00100000-0xcfddffff] because it overlaps
0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0220-0x0225] has been reserved
system 00:01: [io 0x0290-0x0294] has been reserved
system 00:02: [io 0x4100-0x411f] has been reserved
system 00:02: [io 0x0228-0x022f] has been reserved
system 00:02: [io 0x040b] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c52] has been reserved
system 00:02: [io 0x0c6c-0x0c6d] has been reserved
system 00:02: [io 0x0c6f] has been reserved
system 00:02: [io 0x0cd0-0x0cd1] has been reserved
system 00:02: [io 0x0cd2-0x0cd3] has been reserved
system 00:02: [io 0x0cd4-0x0cdf] has been reserved
system 00:02: [io 0x4000-0x40fe] has been reserved
system 00:02: [io 0x4210-0x4217] has been reserved
system 00:02: [io 0x0b00-0x0b0f] has been reserved
system 00:02: [io 0x0b10-0x0b1f] has been reserved
system 00:02: [io 0x0b20-0x0b3f] has been reserved
system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: [mem 0xcfde0000-0xcfdfffff] could not be reserved
system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved
pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03-03]
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:0a.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfdbfffff]
pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xcff00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
CE: hpet increased min_delta_ns to 7500 nsec
pci 0000:01:00.0: Boot video device
PCI: CLS 4 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.15)
Btrfs loaded
msgmni has been set to 32115
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0a.0: setting latency timer to 64
pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI: processor limited to max C-state 1
Non-volatile memory driver v1.3
Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00000040, cirq 22
ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
sky2: driver version 1.28
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
Failed to disable AUX port, but continuing anyway... Is this a SiS?
If AUX port is really absent please use the 'i8042.noaux' option.
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7: WDC WD800JD-60LSA0, 07.01D07, max UDMA/100
ata2.00: 156301488 sectors, multi 0: LBA48
ata3.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133
ata4.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133
ata5.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133
ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/100
ata4.00: configured for UDMA/133
ata5.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata6.00: ATAPI: HL-DT-ST BD-RE BH08LS20, 2.00, max UDMA/133
ata6.00: configured for UDMA/133
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised:
dm-devel@redhat.com
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
Bridge firewalling registered
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
rtc_cmos 00:05: setting system clock to 2010-09-07 19:38:19 UTC (1283888299)
usb 3-2: new low speed USB device using ohci_hcd and address 2
input: Jing-Mold USB K/B as
/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input2
generic-usb 0003:05AF:0802.0001: input,hidraw0: USB HID v1.00 Keyboard
[Jing-Mold USB K/B] on usb-0000:00:12.0-2/input0
input: Jing-Mold USB K/B as
/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input3
generic-usb 0003:05AF:0802.0002: input,hidraw1: USB HID v1.00 Device [Jing-Mold
USB K/B] on usb-0000:00:12.0-2/input1
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: WDC WD740ADFD-00NLR5, 21.07QR5, max UDMA/133
ata1.00: 145226112 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD740ADFD-00 21.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 145226112 512-byte logical blocks: (74.3 GB/69.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA WDC WD800JD-60LS 07.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
scsi 2:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
scsi 3:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
scsi 4:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
scsi 5:0:0:0: CD-ROM HL-DT-ST BD-RE BH08LS20 2.00 PQ: 0 ANSI: 5
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
sde: sde1
sd 4:0:0:0: [sde] Attached SCSI disk
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg5 type 5
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: invalid raid superblock magic on sdd1
md: sdd1 does not have a valid v0.90 superblock, not importing!
usb 3-3: new low speed USB device using ohci_hcd and address 3
md: invalid raid superblock magic on sde1
md: sde1 does not have a valid v0.90 superblock, not importing!
md: invalid raid superblock magic on sdc1
md: sdc1 does not have a valid v0.90 superblock, not importing!
md: Scanned 3 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
device label MainFS devid 1 transid 602030 /dev/root
input: Saitek PLC Saitek P2600 Rumble Force Pad as
/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input4
generic-usb 0003:06A3:5F0D.0003: input,hidraw2: USB HID v1.10 Joystick [Saitek
PLC Saitek P2600 Rumble Force Pad] on usb-0000:00:12.0-3/input0
usb 4-1: new low speed USB device using ohci_hcd and address 2
input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input5
generic-usb 0003:046D:C50E.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech
USB Receiver] on usb-0000:00:12.1-1/input0
VFS: Mounted root (btrfs filesystem) readonly on device 0:11.
Freeing unused kernel memory: 444k freed
NET: Registered protocol family 1
udev: starting version 160
udevd (1406): /proc/1406/oom_adj is deprecated, please use
/proc/1406/oom_score_adj instead.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 42 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc9000012a000,
6c:f0:49:00:91:df, XID 1c4000c0 IRQ 42
input: PC Speaker as /devices/platform/pcspkr/input/input6
udev: renamed network interface eth0 to eth1
k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
firewire_ohci 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
firewire_ohci: Added fw-ohci device 0000:03:0e.0, OHCI v1.10, 4 IR + 8 IT
contexts, quirks 0x2
gameport gameport0: EMU10K1 is pci0000:03:06.1/gameport0, io 0xce00, speed
657kHz
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
radeon 0000:01:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV770 0x1002:0x9440).
[drm] register mmio base: 0xFDEE0000
[drm] register mmio size: 65536
ATOM BIOS: Wekiva
[drm] Clocks initialized !
radeon 0000:01:00.0: VRAM: 512M 0x00000000 - 0x1FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 512M 0x20000000 - 0x3FFFFFFF
mtrr: your BIOS has configured an incorrect mask, fixing it.
mtrr: your BIOS has configured an incorrect mask, fixing it.
mtrr: no more MTRRs available
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 8221824 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
radeon 0000:01:00.0: irq 43 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV770 Microcode
EMU10K1_Audigy 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
firewire_core: created device fw0: GUID 00e4eabe0000241d, S400
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
failed to evaluate ATIF got AE_BAD_PARAMETER
[drm] Default TV standard: PAL
[drm] Default TV standard: PAL
[drm] Default TV standard: PAL
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-I
[drm] HPD2
[drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm] DIN
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP2: INTERNAL_KLDSCP_LVTMA
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 7258112
[drm] fb depth is 24
[drm] pitch is 6912
Console: switching to colour frame buffer device 210x65
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.6.0 20080528 for 0000:01:00.0 on minor 0
btrfs: use compression
r8169 0000:02:00.0: eth1: link up
r8169 0000:02:00.0: eth1: link up
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
tunl0: Disabled Privacy Extensions
eth1: no IPv6 routers present
md: md0 stopped.
md: bind<sdd1>
md: bind<sdc1>
md: bind<sde1>
md/raid:md0: device sde1 operational as raid disk 0
md/raid:md0: device sdc1 operational as raid disk 2
md/raid:md0: device sdd1 operational as raid disk 1
md/raid:md0: allocated 3222kB
md/raid:md0: raid level 5 active with 3 out of 3 devices, algorithm 2
RAID conf printout:
--- level:5 rd:3 wd:3
disk 0, o:1, dev:sde1
disk 1, o:1, dev:sdd1
disk 2, o:1, dev:sdc1
md0: detected capacity change from 0 to 2000404086784
md0: unknown partition table
device label Data devid 1 transid 164277 /dev/md0
r8169 0000:02:00.0: eth1: link up
NET: Registered protocol family 17
eth1: no IPv6 routers present
usb 3-1: new full speed USB device using ohci_hcd and address 4
usb 3-1: USB disconnect, address 4
CE: hpet increased min_delta_ns to 11250 nsec
[drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID
usb 3-1: new full speed USB device using ohci_hcd and address 5
usb 3-1: USB disconnect, address 5
CE: hpet increased min_delta_ns to 16875 nsec
usb 3-1: new full speed USB device using ohci_hcd and address 6
usb 3-1: USB disconnect, address 6
usb 3-1: new full speed USB device using ohci_hcd and address 7
usb 3-1: USB disconnect, address 7
--
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
^ permalink raw reply [flat|nested] 7+ messages in thread* [Bug 30076] Corrupted 3D window with Tiling enabled.
2010-09-08 5:34 [Bug 30076] New: Corrupted 3D window with Tiling enabled bugzilla-daemon
2010-09-08 5:35 ` [Bug 30076] " bugzilla-daemon
@ 2010-09-08 5:36 ` bugzilla-daemon
2010-09-08 5:36 ` bugzilla-daemon
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: bugzilla-daemon @ 2010-09-08 5:36 UTC (permalink / raw)
To: dri-devel
https://bugs.freedesktop.org/show_bug.cgi?id=30076
--- Comment #2 from Mathieu Belanger <b747xx@gmail.com> 2010-09-07 22:36:42 PDT ---
[ 19419.259]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 19419.259] X Protocol Version 11, Revision 0
[ 19419.259] Build Operating System: Linux
2.6.36-rc1-ck1-NX1-00127-g763008c-dirty x86_64 Gentoo
[ 19419.259] Current Operating System: Linux tanith 2.6.36-rc3-NX1-dirty #4 SMP
PREEMPT Tue Sep 7 19:31:22 EDT 2010 x86_64
[ 19419.259] Kernel command line: root=/dev/sda2 memory_corruption_check=0
clocksource=hpet radeon.modeset=1
[ 19419.259] Build Date: 30 August 2010 09:27:18AM
[ 19419.259]
[ 19419.259] Current version of pixman: 0.18.2
[ 19419.259] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19419.259] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19419.259] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 8 01:01:57
2010
[ 19419.259] (==) Using config file: "/etc/X11/xorg.conf"
[ 19419.259] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19419.259] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19419.259] (==) ServerLayout "X.org Configured"
[ 19419.259] (**) |-->Screen "Screen0" (0)
[ 19419.259] (**) | |-->Monitor "Monitor0"
[ 19419.260] (**) | |-->Device "Card0"
[ 19419.260] (**) |-->Input Device "Mouse0"
[ 19419.260] (**) |-->Input Device "Keyboard0"
[ 19419.260] (==) Automatically adding devices
[ 19419.260] (==) Automatically enabling devices
[ 19419.260] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 19419.260] Entry deleted from font path.
[ 19419.260] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 19419.260] Entry deleted from font path.
[ 19419.260] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 19419.260] Entry deleted from font path.
[ 19419.260] (WW) `fonts.dir' not found (or not valid) in
"/usr/share/fonts/100dpi/".
[ 19419.260] Entry deleted from font path.
[ 19419.260] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 19419.260] (WW) `fonts.dir' not found (or not valid) in
"/usr/share/fonts/75dpi/".
[ 19419.260] Entry deleted from font path.
[ 19419.260] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 19419.260] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 19419.260] Entry deleted from font path.
[ 19419.260] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 19419.260] Entry deleted from font path.
[ 19419.260] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 19419.260] Entry deleted from font path.
[ 19419.260] (WW) `fonts.dir' not found (or not valid) in
"/usr/share/fonts/100dpi/".
[ 19419.260] Entry deleted from font path.
[ 19419.260] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 19419.260] (WW) `fonts.dir' not found (or not valid) in
"/usr/share/fonts/75dpi/".
[ 19419.260] Entry deleted from font path.
[ 19419.260] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 19419.260] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/misc/
[ 19419.260] (**) ModulePath set to "/usr/lib64/xorg/modules"
[ 19419.260] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse'
or 'vmmouse' will be disabled.
[ 19419.260] (WW) Disabling Mouse0
[ 19419.260] (WW) Disabling Keyboard0
[ 19419.260] (II) Loader magic: 0x7cf720
[ 19419.260] (II) Module ABI versions:
[ 19419.260] X.Org ANSI C Emulation: 0.4
[ 19419.260] X.Org Video Driver: 8.0
[ 19419.260] X.Org XInput driver : 11.0
[ 19419.260] X.Org Server Extension : 4.0
[ 19419.261] (--) PCI:*(0:1:0:0) 1002:9440:174b:e850 rev 0, Mem @
0xd0000000/268435456, 0xfdee0000/65536, I/O @ 0x0000ee00/256, BIOS @
0x????????/131072
[ 19419.261] (II) Open ACPI successful (/var/run/acpid.socket)
[ 19419.261] (II) "extmod" will be loaded. This was enabled by default and also
specified in the config file.
[ 19419.261] (II) "dbe" will be loaded. This was enabled by default and also
specified in the config file.
[ 19419.261] (II) "glx" will be loaded. This was enabled by default and also
specified in the config file.
[ 19419.261] (II) "record" will be loaded. This was enabled by default and also
specified in the config file.
[ 19419.261] (II) "dri" will be loaded. This was enabled by default and also
specified in the config file.
[ 19419.261] (II) "dri2" will be loaded. This was enabled by default and also
specified in the config file.
[ 19419.261] (II) LoadModule: "extmod"
[ 19419.261] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 19419.261] (II) Module extmod: vendor="X.Org Foundation"
[ 19419.261] compiled for 1.9.0, module version = 1.0.0
[ 19419.261] Module class: X.Org Server Extension
[ 19419.261] ABI class: X.Org Server Extension, version 4.0
[ 19419.261] (II) Loading extension MIT-SCREEN-SAVER
[ 19419.261] (II) Loading extension XFree86-VidModeExtension
[ 19419.261] (II) Loading extension XFree86-DGA
[ 19419.261] (II) Loading extension DPMS
[ 19419.261] (II) Loading extension XVideo
[ 19419.261] (II) Loading extension XVideo-MotionCompensation
[ 19419.261] (II) Loading extension X-Resource
[ 19419.261] (II) LoadModule: "record"
[ 19419.261] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 19419.261] (II) Module record: vendor="X.Org Foundation"
[ 19419.261] compiled for 1.9.0, module version = 1.13.0
[ 19419.261] Module class: X.Org Server Extension
[ 19419.261] ABI class: X.Org Server Extension, version 4.0
[ 19419.261] (II) Loading extension RECORD
[ 19419.261] (II) LoadModule: "dbe"
[ 19419.261] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 19419.261] (II) Module dbe: vendor="X.Org Foundation"
[ 19419.261] compiled for 1.9.0, module version = 1.0.0
[ 19419.261] Module class: X.Org Server Extension
[ 19419.261] ABI class: X.Org Server Extension, version 4.0
[ 19419.261] (II) Loading extension DOUBLE-BUFFER
[ 19419.261] (II) LoadModule: "dri"
[ 19419.261] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 19419.262] (II) Module dri: vendor="X.Org Foundation"
[ 19419.262] compiled for 1.9.0, module version = 1.0.0
[ 19419.262] ABI class: X.Org Server Extension, version 4.0
[ 19419.262] (II) Loading extension XFree86-DRI
[ 19419.262] (II) LoadModule: "dri2"
[ 19419.262] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 19419.262] (II) Module dri2: vendor="X.Org Foundation"
[ 19419.262] compiled for 1.9.0, module version = 1.2.0
[ 19419.262] ABI class: X.Org Server Extension, version 4.0
[ 19419.262] (II) Loading extension DRI2
[ 19419.262] (II) LoadModule: "glx"
[ 19419.262] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 19419.262] (II) Module glx: vendor="X.Org Foundation"
[ 19419.262] compiled for 1.9.0, module version = 1.0.0
[ 19419.262] ABI class: X.Org Server Extension, version 4.0
[ 19419.262] (==) AIGLX enabled
[ 19419.262] (II) Loading extension GLX
[ 19419.262] (II) LoadModule: "radeon"
[ 19419.262] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
[ 19419.262] (II) Module radeon: vendor="X.Org Foundation"
[ 19419.262] compiled for 1.9.0, module version = 6.13.99
[ 19419.262] Module class: X.Org Video Driver
[ 19419.262] ABI class: X.Org Video Driver, version 8.0
[ 19419.262] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4290, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR
[ 19419.266] (++) using VT number 8
[ 19419.271] (II) [KMS] Kernel modesetting enabled.
[ 19419.271] (**) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 19419.271] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp
pixmaps)
[ 19419.271] (==) RADEON(0): Default visual is TrueColor
[ 19419.271] (**) RADEON(0): Option "ColorTiling" "true"
[ 19419.271] (==) RADEON(0): RGB weight 888
[ 19419.271] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 19419.271] (--) RADEON(0): Chipset: "ATI Radeon 4800 Series" (ChipID =
0x9440)
[ 19419.271] (II) RADEON(0): PCIE card detected
[ 19419.271] drmOpenDevice: node name is /dev/dri/card0
[ 19419.271] drmOpenDevice: open result is 9, (OK)
[ 19419.271] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 19419.271] drmOpenDevice: node name is /dev/dri/card0
[ 19419.271] drmOpenDevice: open result is 9, (OK)
[ 19419.271] drmOpenByBusid: drmOpenMinor returns 9
[ 19419.271] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 19419.271] (II) RADEON(0): KMS Color Tiling: enabled
[ 19419.326] (II) RADEON(0): Output DVI-0 using monitor section Monitor0
[ 19419.336] (II) RADEON(0): Output DIN has no monitor section
[ 19419.391] (II) RADEON(0): Output DVI-1 using monitor section Monitor1
[ 19419.391] (**) RADEON(0): Option "RightOf" "Monitor0"
[ 19419.446] (II) RADEON(0): EDID for output DVI-0
[ 19419.446] (II) RADEON(0): Manufacturer: SAM Model: 27f Serial#: 1296380466
[ 19419.446] (II) RADEON(0): Year: 2007 Week: 41
[ 19419.446] (II) RADEON(0): EDID Version: 1.3
[ 19419.446] (II) RADEON(0): Digital Display Input
[ 19419.446] (II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 19419.446] (II) RADEON(0): Gamma: 2.20
[ 19419.446] (II) RADEON(0): DPMS capabilities: Off
[ 19419.446] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 19419.446] (II) RADEON(0): First detailed timing is preferred mode
[ 19419.446] (II) RADEON(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY:
0.603
[ 19419.446] (II) RADEON(0): blueX: 0.152 blueY: 0.079 whiteX: 0.313 whiteY:
0.329
[ 19419.446] (II) RADEON(0): Supported established timings:
[ 19419.446] (II) RADEON(0): 720x400@70Hz
[ 19419.446] (II) RADEON(0): 640x480@60Hz
[ 19419.446] (II) RADEON(0): 640x480@67Hz
[ 19419.446] (II) RADEON(0): 640x480@72Hz
[ 19419.446] (II) RADEON(0): 640x480@75Hz
[ 19419.446] (II) RADEON(0): 800x600@56Hz
[ 19419.446] (II) RADEON(0): 800x600@60Hz
[ 19419.446] (II) RADEON(0): 800x600@72Hz
[ 19419.446] (II) RADEON(0): 800x600@75Hz
[ 19419.446] (II) RADEON(0): 832x624@75Hz
[ 19419.446] (II) RADEON(0): 1024x768@60Hz
[ 19419.446] (II) RADEON(0): 1024x768@70Hz
[ 19419.446] (II) RADEON(0): 1024x768@75Hz
[ 19419.446] (II) RADEON(0): 1280x1024@75Hz
[ 19419.446] (II) RADEON(0): 1152x864@75Hz
[ 19419.446] (II) RADEON(0): Manufacturer's mask: 0
[ 19419.446] (II) RADEON(0): Supported standard timings:
[ 19419.446] (II) RADEON(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 19419.446] (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid:
32897
[ 19419.446] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid:
16513
[ 19419.446] (II) RADEON(0): #3: hsize: 1152 vsize 864 refresh: 75 vid:
20337
[ 19419.446] (II) RADEON(0): Supported detailed timing:
[ 19419.446] (II) RADEON(0): clock: 119.0 MHz Image Size: 474 x 296 mm
[ 19419.446] (II) RADEON(0): h_active: 1680 h_sync: 1728 h_sync_end 1760
h_blank_end 1840 h_border: 0
[ 19419.446] (II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059
v_blanking: 1080 v_border: 0
[ 19419.446] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max:
81 kHz, PixClock max 145 MHz
[ 19419.446] (II) RADEON(0): Monitor name: SyncMaster
[ 19419.446] (II) RADEON(0): Serial No: HVCPA09443
[ 19419.446] (II) RADEON(0): EDID (in hex):
[ 19419.446] (II) RADEON(0): 00ffffffffffff004c2d7f023232454d
[ 19419.446] (II) RADEON(0): 29110103802f1e782ad515a455499a27
[ 19419.446] (II) RADEON(0): 145054bfef80b30081808140714f0101
[ 19419.446] (II) RADEON(0): 0101010101017c2e90a0601a1e403020
[ 19419.446] (II) RADEON(0): 3600da281100001a000000fd00384b1e
[ 19419.446] (II) RADEON(0): 510e000a202020202020000000fc0053
[ 19419.446] (II) RADEON(0): 796e634d61737465720a2020000000ff
[ 19419.446] (II) RADEON(0): 00485643504130393434330a2020001f
[ 19419.446] (II) RADEON(0): EDID vendor "SAM", prod id 639
[ 19419.446] (II) RADEON(0): Using hsync ranges from config file
[ 19419.446] (II) RADEON(0): Using vrefresh ranges from config file
[ 19419.446] (II) RADEON(0): Printing DDC gathered Modelines:
[ 19419.446] (II) RADEON(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760
1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 19419.446] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz)
[ 19419.446] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz)
[ 19419.446] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz)
[ 19419.446] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832
480 489 492 520 -hsync -vsync (37.9 kHz)
[ 19419.446] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864
480 483 486 525 -hsync -vsync (35.0 kHz)
[ 19419.446] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz)
[ 19419.446] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz)
[ 19419.446] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 19419.446] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 19419.446] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 19419.446] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 19419.446] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz)
[ 19419.447] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz)
[ 19419.447] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz)
[ 19419.447] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 19419.447] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 19419.447] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 19419.447] (II) RADEON(0): Printing probed modes for output DVI-0
[ 19419.447] (II) RADEON(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760
1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 19419.447] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 19419.447] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 19419.447] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 19419.447] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 19419.447] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 19419.447] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 19419.447] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 19419.447] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz)
[ 19419.447] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz)
[ 19419.447] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz)
[ 19419.447] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz)
[ 19419.447] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz)
[ 19419.447] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832
480 489 491 520 -hsync -vsync (37.9 kHz)
[ 19419.447] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz)
[ 19419.447] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864
480 483 486 525 -hsync -vsync (35.0 kHz)
[ 19419.447] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz)
[ 19419.447] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz)
[ 19419.457] (II) RADEON(0): EDID for output DIN
[ 19419.512] (II) RADEON(0): EDID for output DVI-1
[ 19419.512] (II) RADEON(0): Manufacturer: SAM Model: 254 Serial#: 1146106418
[ 19419.512] (II) RADEON(0): Year: 2007 Week: 49
[ 19419.512] (II) RADEON(0): EDID Version: 1.3
[ 19419.512] (II) RADEON(0): Analog Display Input, Input Voltage Level:
0.700/0.300 V
[ 19419.512] (II) RADEON(0): Sync: Separate Composite SyncOnGreen
[ 19419.512] (II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 19419.512] (II) RADEON(0): Gamma: 2.20
[ 19419.512] (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
[ 19419.512] (II) RADEON(0): First detailed timing is preferred mode
[ 19419.512] (II) RADEON(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY:
0.603
[ 19419.512] (II) RADEON(0): blueX: 0.152 blueY: 0.079 whiteX: 0.313 whiteY:
0.329
[ 19419.512] (II) RADEON(0): Supported established timings:
[ 19419.512] (II) RADEON(0): 720x400@70Hz
[ 19419.512] (II) RADEON(0): 640x480@60Hz
[ 19419.512] (II) RADEON(0): 640x480@67Hz
[ 19419.512] (II) RADEON(0): 640x480@72Hz
[ 19419.512] (II) RADEON(0): 640x480@75Hz
[ 19419.512] (II) RADEON(0): 800x600@56Hz
[ 19419.512] (II) RADEON(0): 800x600@60Hz
[ 19419.512] (II) RADEON(0): 800x600@72Hz
[ 19419.512] (II) RADEON(0): 800x600@75Hz
[ 19419.512] (II) RADEON(0): 832x624@75Hz
[ 19419.512] (II) RADEON(0): 1024x768@60Hz
[ 19419.512] (II) RADEON(0): 1024x768@70Hz
[ 19419.512] (II) RADEON(0): 1024x768@75Hz
[ 19419.512] (II) RADEON(0): 1280x1024@75Hz
[ 19419.512] (II) RADEON(0): 1152x864@75Hz
[ 19419.512] (II) RADEON(0): Manufacturer's mask: 0
[ 19419.512] (II) RADEON(0): Supported standard timings:
[ 19419.512] (II) RADEON(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 19419.512] (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid:
32897
[ 19419.512] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid:
16513
[ 19419.512] (II) RADEON(0): #3: hsize: 1152 vsize 864 refresh: 75 vid:
20337
[ 19419.512] (II) RADEON(0): Supported detailed timing:
[ 19419.512] (II) RADEON(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 19419.512] (II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960
h_blank_end 2240 h_border: 0
[ 19419.512] (II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059
v_blanking: 1089 v_border: 0
[ 19419.512] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max:
81 kHz, PixClock max 175 MHz
[ 19419.512] (II) RADEON(0): Monitor name: SyncMaster
[ 19419.512] (II) RADEON(0): Serial No: HVRPC00616
[ 19419.512] (II) RADEON(0): EDID (in hex):
[ 19419.512] (II) RADEON(0): 00ffffffffffff004c2d540232325044
[ 19419.512] (II) RADEON(0): 311101030e2f1e782ad515a455499a27
[ 19419.512] (II) RADEON(0): 145054bfef80b30081808140714f0101
[ 19419.512] (II) RADEON(0): 01010101010121399030621a274068b0
[ 19419.512] (II) RADEON(0): 3600da281100001c000000fd00384b1e
[ 19419.512] (II) RADEON(0): 5111000a202020202020000000fc0053
[ 19419.512] (II) RADEON(0): 796e634d61737465720a2020000000ff
[ 19419.512] (II) RADEON(0): 00485652504330303631360a20200090
[ 19419.512] (II) RADEON(0): Printing probed modes for output DVI-1
[ 19419.512] (II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 19419.512] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 19419.512] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 19419.512] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 19419.512] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 19419.512] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 19419.512] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 19419.512] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 19419.512] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz)
[ 19419.512] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz)
[ 19419.512] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz)
[ 19419.512] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz)
[ 19419.513] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz)
[ 19419.513] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832
480 489 491 520 -hsync -vsync (37.9 kHz)
[ 19419.513] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz)
[ 19419.513] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864
480 483 486 525 -hsync -vsync (35.0 kHz)
[ 19419.513] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz)
[ 19419.513] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz)
[ 19419.513] (II) RADEON(0): Output DVI-0 connected
[ 19419.513] (II) RADEON(0): Output DIN disconnected
[ 19419.513] (II) RADEON(0): Output DVI-1 connected
[ 19419.513] (II) RADEON(0): Using user preference for initial modes
[ 19419.513] (II) RADEON(0): Output DVI-0 using initial mode 1680x1050
[ 19419.513] (II) RADEON(0): Output DVI-1 using initial mode 1680x1050
[ 19419.513] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 19419.513] (II) RADEON(0): mem size init: gart size :1fdff000 vram size:
s:20000000 visible:1f8d4000
[ 19419.513] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 19419.513] (**) RADEON(0): Display dimensions: (470, 300) mm
[ 19419.513] (**) RADEON(0): DPI set to (181, 88)
[ 19419.513] (II) Loading sub module "fb"
[ 19419.513] (II) LoadModule: "fb"
[ 19419.513] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 19419.513] (II) Module fb: vendor="X.Org Foundation"
[ 19419.513] compiled for 1.9.0, module version = 1.0.0
[ 19419.513] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19419.513] (II) Loading sub module "ramdac"
[ 19419.513] (II) LoadModule: "ramdac"
[ 19419.513] (II) Module "ramdac" already built-in
[ 19419.513] (II) Loading sub module "exa"
[ 19419.513] (II) LoadModule: "exa"
[ 19419.513] (II) Loading /usr/lib64/xorg/modules/libexa.so
[ 19419.513] (II) Module exa: vendor="X.Org Foundation"
[ 19419.513] compiled for 1.9.0, module version = 2.5.0
[ 19419.513] ABI class: X.Org Video Driver, version 8.0
[ 19419.513] (--) Depth 24 pixmap format is 32 bpp
[ 19419.513] (II) RADEON(0): [DRI2] Setup complete
[ 19419.513] (II) RADEON(0): [DRI2] DRI driver: r600
[ 19419.513] (II) RADEON(0): Front buffer size: 14784K
[ 19419.513] (II) RADEON(0): VRAM usage limit set to 451944K
[ 19419.514] (==) RADEON(0): Backing store disabled
[ 19419.514] (II) RADEON(0): Direct rendering enabled
[ 19419.514] (II) RADEON(0): Setting EXA maxPitchBytes
[ 19419.514] (II) EXA(0): Driver allocated offscreen pixmaps
[ 19419.514] (II) EXA(0): Driver registered support for the following
operations:
[ 19419.514] (II) Solid
[ 19419.514] (II) Copy
[ 19419.514] (II) Composite (RENDER acceleration)
[ 19419.514] (II) UploadToScreen
[ 19419.514] (II) DownloadFromScreen
[ 19419.514] (II) RADEON(0): Acceleration enabled
[ 19419.514] (**) RADEON(0): DPMS enabled
[ 19419.514] (==) RADEON(0): Silken mouse enabled
[ 19419.514] (II) RADEON(0): Set up textured video
[ 19419.514] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 19419.514] (WW) RADEON(0): Option "AllowColorTiling" is not used
[ 19419.514] (--) RandR disabled
[ 19419.514] (II) Initializing built-in extension Generic Event Extension
[ 19419.514] (II) Initializing built-in extension SHAPE
[ 19419.514] (II) Initializing built-in extension MIT-SHM
[ 19419.514] (II) Initializing built-in extension XInputExtension
[ 19419.514] (II) Initializing built-in extension XTEST
[ 19419.514] (II) Initializing built-in extension BIG-REQUESTS
[ 19419.514] (II) Initializing built-in extension SYNC
[ 19419.514] (II) Initializing built-in extension XKEYBOARD
[ 19419.514] (II) Initializing built-in extension XC-MISC
[ 19419.514] (II) Initializing built-in extension XINERAMA
[ 19419.514] (II) Initializing built-in extension XFIXES
[ 19419.514] (II) Initializing built-in extension RENDER
[ 19419.514] (II) Initializing built-in extension RANDR
[ 19419.514] (II) Initializing built-in extension COMPOSITE
[ 19419.514] (II) Initializing built-in extension DAMAGE
[ 19419.520] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 19419.520] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 19419.520] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 19419.520] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 19419.520] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 19419.521] (II) AIGLX: Loaded and initialized /usr/lib64/dri/r600_dri.so
[ 19419.521] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 19419.521] (II) RADEON(0): Setting screen physical size to 889 x 277
[ 19419.560] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 19419.560] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19419.560] (**) Power Button: Applying InputClass "Jing-Mold Enterprise Co.,
Ltd"
[ 19419.560] (II) LoadModule: "evdev"
[ 19419.560] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 19419.560] (II) Module evdev: vendor="X.Org Foundation"
[ 19419.560] compiled for 1.9.0, module version = 2.5.0
[ 19419.560] Module class: X.Org XInput Driver
[ 19419.560] ABI class: X.Org XInput driver, version 11.0
[ 19419.560] (**) Power Button: always reports core events
[ 19419.560] (**) Power Button: Device: "/dev/input/event1"
[ 19419.564] (--) Power Button: Found keys
[ 19419.564] (II) Power Button: Configuring as keyboard
[ 19419.564] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD)
[ 19419.564] (**) Option "xkb_rules" "evdev"
[ 19419.564] (**) Option "xkb_model" "evdev"
[ 19419.564] (**) Option "xkb_layout" "dvorak"
[ 19419.582] (II) config/udev: Adding input device Power Button
(/dev/input/event0)
[ 19419.582] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19419.582] (**) Power Button: Applying InputClass "Jing-Mold Enterprise Co.,
Ltd"
[ 19419.582] (**) Power Button: always reports core events
[ 19419.582] (**) Power Button: Device: "/dev/input/event0"
[ 19419.586] (--) Power Button: Found keys
[ 19419.586] (II) Power Button: Configuring as keyboard
[ 19419.586] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD)
[ 19419.586] (**) Option "xkb_rules" "evdev"
[ 19419.586] (**) Option "xkb_model" "evdev"
[ 19419.586] (**) Option "xkb_layout" "dvorak"
[ 19419.588] (II) config/udev: Adding input device Jing-Mold USB K/B
(/dev/input/event2)
[ 19419.588] (**) Jing-Mold USB K/B: Applying InputClass "evdev keyboard
catchall"
[ 19419.588] (**) Jing-Mold USB K/B: Applying InputClass "Jing-Mold Enterprise
Co., Ltd"
[ 19419.588] (**) Jing-Mold USB K/B: always reports core events
[ 19419.588] (**) Jing-Mold USB K/B: Device: "/dev/input/event2"
[ 19419.594] (--) Jing-Mold USB K/B: Found keys
[ 19419.594] (II) Jing-Mold USB K/B: Configuring as keyboard
[ 19419.594] (II) XINPUT: Adding extended input device "Jing-Mold USB K/B"
(type: KEYBOARD)
[ 19419.594] (**) Option "xkb_rules" "evdev"
[ 19419.594] (**) Option "xkb_model" "evdev"
[ 19419.594] (**) Option "xkb_layout" "dvorak"
[ 19419.594] (II) config/udev: Adding input device Jing-Mold USB K/B
(/dev/input/event3)
[ 19419.594] (**) Jing-Mold USB K/B: Applying InputClass "evdev keyboard
catchall"
[ 19419.594] (**) Jing-Mold USB K/B: Applying InputClass "Jing-Mold Enterprise
Co., Ltd"
[ 19419.594] (**) Jing-Mold USB K/B: always reports core events
[ 19419.594] (**) Jing-Mold USB K/B: Device: "/dev/input/event3"
[ 19419.600] (--) Jing-Mold USB K/B: Found 9 mouse buttons
[ 19419.600] (--) Jing-Mold USB K/B: Found keys
[ 19419.600] (II) Jing-Mold USB K/B: Configuring as mouse
[ 19419.600] (II) Jing-Mold USB K/B: Configuring as keyboard
[ 19419.600] (**) Jing-Mold USB K/B: YAxisMapping: buttons 4 and 5
[ 19419.600] (**) Jing-Mold USB K/B: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19419.600] (II) XINPUT: Adding extended input device "Jing-Mold USB K/B"
(type: KEYBOARD)
[ 19419.600] (**) Option "xkb_rules" "evdev"
[ 19419.600] (**) Option "xkb_model" "evdev"
[ 19419.600] (**) Option "xkb_layout" "dvorak"
[ 19419.600] (II) config/udev: Adding input device Saitek PLC Saitek P2600
Rumble Force Pad (/dev/input/event4)
[ 19419.600] (II) No input driver/identifier specified (ignoring)
[ 19419.600] (II) config/udev: Adding input device Saitek PLC Saitek P2600
Rumble Force Pad (/dev/input/js0)
[ 19419.600] (II) No input driver/identifier specified (ignoring)
[ 19419.601] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/input/event5)
[ 19419.601] (**) Logitech USB Receiver: Applying InputClass "evdev pointer
catchall"
[ 19419.601] (**) Logitech USB Receiver: always reports core events
[ 19419.601] (**) Logitech USB Receiver: Device: "/dev/input/event5"
[ 19419.605] (--) Logitech USB Receiver: Found 20 mouse buttons
[ 19419.605] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 19419.605] (--) Logitech USB Receiver: Found relative axes
[ 19419.605] (--) Logitech USB Receiver: Found x and y relative axes
[ 19419.605] (II) Logitech USB Receiver: Configuring as mouse
[ 19419.605] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 19419.605] (**) Logitech USB Receiver: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19419.605] (II) XINPUT: Adding extended input device "Logitech USB Receiver"
(type: MOUSE)
[ 19419.605] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 19419.605] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 19419.605] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 19419.605] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 19419.605] (II) Logitech USB Receiver: initialized for relative axes.
[ 19419.605] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/input/mouse0)
[ 19419.605] (II) No input driver/identifier specified (ignoring)
[ 19419.607] (II) config/udev: Adding input device PC Speaker
(/dev/input/event6)
[ 19419.607] (II) No input driver/identifier specified (ignoring)
[ 19424.925] (II) RADEON(0): EDID vendor "SAM", prod id 596
[ 19424.925] (II) RADEON(0): EDID quirk: Detailed timing is not preferred,
use largest mode at 60Hz
[ 19424.925] (II) RADEON(0): Using hsync ranges from config file
[ 19424.925] (II) RADEON(0): Using vrefresh ranges from config file
[ 19424.925] (II) RADEON(0): Printing DDC gathered Modelines:
--
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
^ permalink raw reply [flat|nested] 7+ messages in thread