[PATCH 0/2] x86: AMD C1E fix and cleanup

[PATCH 0/2] x86: AMD C1E fix and cleanup

[Michal Schmidt]

The first patch fixes AMD C1E once again. The second one is a cleanup.

---

Michal Schmidt (2):
      x86: remove c1e_mask
      x86: fix keeping track of AMD C1E


 arch/x86/include/asm/cpufeature.h |    2 +-
 arch/x86/include/asm/idle.h       |    2 --
 arch/x86/include/asm/processor.h  |    1 -
 arch/x86/kernel/cpu/common.c      |    1 -
 arch/x86/kernel/process.c         |   34 ++++++++++++++--------------------
 arch/x86/kernel/smpboot.c         |    1 -
 6 files changed, 15 insertions(+), 26 deletions(-)

-- 
Michal

[PATCH 1/2] x86: fix keeping track of AMD C1E

[Michal Schmidt]

On my system with AMD Phenom II X6 I am seeing pauses at boot (usually during
udev startup) which require a key press to continue. It only happens if C1E is
enabled in the BIOS.

It's caused by the APIC timer's inability to wake up the CPU from C1E (AMD
erratum #400). Linux has a workaround for it, but it's not being applied
correctly in this case. Though c1e_idle() detects C1E just fine, by the time
acpi_idle ('processor.ko' module) takes over, it is forgotten.

After AMD C1E is detected, it is not sufficient to flag it in boot_cpu_data,
because the flag will get cleared in identify_cpu() when more CPUs are brought
up later. The fix is to mark the flag as forced.

The additional call to set_cpu_cap() is just to make sure the flag is set even
on the CPUs that are already up and /proc/cpuinfo shows 'amdc1e' on all.

Also fix indentation in the function.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
---

 arch/x86/kernel/process.c |    9 +++++----
 1 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index e7e3521..f3520a8 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -589,7 +589,7 @@ static void c1e_idle(void)
 			if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
 				mark_tsc_unstable("TSC halt in AMD C1E");
 			printk(KERN_INFO "System has AMD C1E enabled\n");
-			set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E);
+			setup_force_cpu_cap(X86_FEATURE_AMDC1E);
 		}
 	}
 
@@ -605,6 +605,7 @@ static void c1e_idle(void)
 					   &cpu);
 			printk(KERN_INFO "Switch to broadcast mode on CPU%d\n",
 			       cpu);
+			set_cpu_cap(&current_cpu_data, X86_FEATURE_AMDC1E);
 		}
 		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
 
@@ -614,9 +615,9 @@ static void c1e_idle(void)
 		 * The switch back from broadcast mode needs to be
 		 * called with interrupts disabled.
 		 */
-		 local_irq_disable();
-		 clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
-		 local_irq_enable();
+		local_irq_disable();
+		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
+		local_irq_enable();
 	} else
 		default_idle();
 }

[PATCH 2/2] x86: remove c1e_mask

[Michal Schmidt]

c1e_mask is redundant. The information about activated timer broadcast for
AMD C1E is kept in the CPU feature flags.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
---

 arch/x86/include/asm/cpufeature.h |    2 +-
 arch/x86/include/asm/idle.h       |    2 --
 arch/x86/include/asm/processor.h  |    1 -
 arch/x86/kernel/cpu/common.c      |    1 -
 arch/x86/kernel/process.c         |   25 +++++++++----------------
 arch/x86/kernel/smpboot.c         |    1 -
 6 files changed, 10 insertions(+), 22 deletions(-)

diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 4681459..d826f48 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -89,7 +89,7 @@
 #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* "" Lfence synchronizes RDTSC */
 #define X86_FEATURE_11AP	(3*32+19) /* "" Bad local APIC aka 11AP */
 #define X86_FEATURE_NOPL	(3*32+20) /* The NOPL (0F 1F) instructions */
-#define X86_FEATURE_AMDC1E	(3*32+21) /* AMD C1E detected */
+#define X86_FEATURE_AMDC1E	(3*32+21) /* Broken APIC timer in AMD C1E */
 #define X86_FEATURE_XTOPOLOGY	(3*32+22) /* cpu topology enum extensions */
 #define X86_FEATURE_TSC_RELIABLE (3*32+23) /* TSC is known to be reliable */
 #define X86_FEATURE_NONSTOP_TSC	(3*32+24) /* TSC does not stop in C states */
diff --git a/arch/x86/include/asm/idle.h b/arch/x86/include/asm/idle.h
index 38d8737..1ef7da2 100644
--- a/arch/x86/include/asm/idle.h
+++ b/arch/x86/include/asm/idle.h
@@ -16,6 +16,4 @@ static inline void enter_idle(void) { }
 static inline void exit_idle(void) { }
 #endif /* CONFIG_X86_64 */
 
-void c1e_remove_cpu(int cpu);
-
 #endif /* _ASM_X86_IDLE_H */
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 7e5c6a6..c5e29a9 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -757,7 +757,6 @@ static inline void __sti_mwait(unsigned long eax, unsigned long ecx)
 extern void mwait_idle_with_hints(unsigned long eax, unsigned long ecx);
 
 extern void select_idle_routine(const struct cpuinfo_x86 *c);
-extern void init_c1e_mask(void);
 
 extern unsigned long		boot_option_idle_override;
 extern unsigned long		idle_halt;
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 68e4a6f..7be2fbf 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -864,7 +864,6 @@ static void vgetcpu_set_mode(void)
 void __init identify_boot_cpu(void)
 {
 	identify_cpu(&boot_cpu_data);
-	init_c1e_mask();
 #ifdef CONFIG_X86_32
 	sysenter_setup();
 	enable_sep_cpu();
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index f3520a8..cfe109d 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -561,15 +561,8 @@ no_c1e_idle:
 	return 0;
 }
 
-static cpumask_var_t c1e_mask;
 static int c1e_detected;
 
-void c1e_remove_cpu(int cpu)
-{
-	if (c1e_mask != NULL)
-		cpumask_clear_cpu(cpu, c1e_mask);
-}
-
 /*
  * C1E aware idle routine. We check for C1E active in the interrupt
  * pending message MSR. If we detect C1E, then we handle it the same
@@ -596,8 +589,7 @@ static void c1e_idle(void)
 	if (c1e_detected) {
 		int cpu = smp_processor_id();
 
-		if (!cpumask_test_cpu(cpu, c1e_mask)) {
-			cpumask_set_cpu(cpu, c1e_mask);
+		if (!cpu_has(&current_cpu_data, X86_FEATURE_AMDC1E)) {
 			/*
 			 * Force broadcast so ACPI can not interfere.
 			 */
@@ -630,6 +622,14 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
 			" performance may degrade.\n");
 	}
 #endif
+	if (c1e_detected) {
+		/*
+		 * Broadcast can't have been activated on this CPU yet.
+		 * Clear the flag to let c1e_idle() do it.
+		 */
+		clear_cpu_cap(&current_cpu_data, X86_FEATURE_AMDC1E);
+	}
+
 	if (pm_idle)
 		return;
 
@@ -646,13 +646,6 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
 		pm_idle = default_idle;
 }
 
-void __init init_c1e_mask(void)
-{
-	/* If we're using c1e_idle, we need to allocate c1e_mask. */
-	if (pm_idle == c1e_idle)
-		zalloc_cpumask_var(&c1e_mask, GFP_KERNEL);
-}
-
 static int __init idle_setup(char *str)
 {
 	if (!str)
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index c4f33b2..dd647bb 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1355,7 +1355,6 @@ void play_dead_common(void)
 	idle_task_exit();
 	reset_lazy_tlbstate();
 	irq_ctx_exit(raw_smp_processor_id());
-	c1e_remove_cpu(raw_smp_processor_id());
 
 	mb();
 	/* Ack it */

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[H. Peter Anvin]

[Adding Borislav and Hans to the Cc: list]

Any objections?  Otherwise I'm going to queue this up in the urgent queue.

	-hpa


On 07/13/2010 11:59 AM, Michal Schmidt wrote:
> On my system with AMD Phenom II X6 I am seeing pauses at boot (usually during
> udev startup) which require a key press to continue. It only happens if C1E is
> enabled in the BIOS.
> 
> It's caused by the APIC timer's inability to wake up the CPU from C1E (AMD
> erratum #400). Linux has a workaround for it, but it's not being applied
> correctly in this case. Though c1e_idle() detects C1E just fine, by the time
> acpi_idle ('processor.ko' module) takes over, it is forgotten.
> 
> After AMD C1E is detected, it is not sufficient to flag it in boot_cpu_data,
> because the flag will get cleared in identify_cpu() when more CPUs are brought
> up later. The fix is to mark the flag as forced.
> 
> The additional call to set_cpu_cap() is just to make sure the flag is set even
> on the CPUs that are already up and /proc/cpuinfo shows 'amdc1e' on all.
> 
> Also fix indentation in the function.
> 
> Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
> ---
> 
>  arch/x86/kernel/process.c |    9 +++++----
>  1 files changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
> index e7e3521..f3520a8 100644
> --- a/arch/x86/kernel/process.c
> +++ b/arch/x86/kernel/process.c
> @@ -589,7 +589,7 @@ static void c1e_idle(void)
>  			if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
>  				mark_tsc_unstable("TSC halt in AMD C1E");
>  			printk(KERN_INFO "System has AMD C1E enabled\n");
> -			set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E);
> +			setup_force_cpu_cap(X86_FEATURE_AMDC1E);
>  		}
>  	}
>  
> @@ -605,6 +605,7 @@ static void c1e_idle(void)
>  					   &cpu);
>  			printk(KERN_INFO "Switch to broadcast mode on CPU%d\n",
>  			       cpu);
> +			set_cpu_cap(&current_cpu_data, X86_FEATURE_AMDC1E);
>  		}
>  		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
>  
> @@ -614,9 +615,9 @@ static void c1e_idle(void)
>  		 * The switch back from broadcast mode needs to be
>  		 * called with interrupts disabled.
>  		 */
> -		 local_irq_disable();
> -		 clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
> -		 local_irq_enable();
> +		local_irq_disable();
> +		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
> +		local_irq_enable();
>  	} else
>  		default_idle();
>  }
> 

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Borislav Petkov]

From: "H. Peter Anvin" <hpa@zytor.com>
Date: Tue, Jul 13, 2010 at 01:05:06PM -0700

> [Adding Borislav and Hans to the Cc: list]
> 
> Any objections?  Otherwise I'm going to queue this up in the urgent queue.

Yeah, I was staring at it already. And it looks ok at a first glance.
However, since you want to speed it up into urgent, I'd like to give it
a run at our X6 boxes tomorrow before ACKing it..

> On 07/13/2010 11:59 AM, Michal Schmidt wrote:
> > On my system with AMD Phenom II X6 I am seeing pauses at boot (usually during
> > udev startup) which require a key press to continue. It only happens if C1E is
> > enabled in the BIOS.

... and this is strange, I didn't experience anything like that on our
X6 boxes here couple of months ago. But maybe something got changed in
later kernels to trigger that behavior. Michal, what chipset is that and
do you have the latest BIOS on it?

-- 
Regards/Gruss,
Boris.

Advanced Micro Devices GmbH
Einsteinring 24, 85609 Dornach
General Managers: Alberto Bozzo, Andrew Bowd
Registration: Dornach, Gemeinde Aschheim, Landkreis Muenchen
Registergericht Muenchen, HRB Nr. 43632

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Borislav Petkov]

From: Michal Schmidt <mschmidt@redhat.com>
Date: Tue, Jul 13, 2010 at 08:59:58PM +0200

Hi,

> On my system with AMD Phenom II X6 I am seeing pauses at boot (usually during
> udev startup) which require a key press to continue. It only happens if C1E is
> enabled in the BIOS.
> 
> It's caused by the APIC timer's inability to wake up the CPU from C1E (AMD
> erratum #400). Linux has a workaround for it, but it's not being applied
> correctly in this case. Though c1e_idle() detects C1E just fine, by the time
> acpi_idle ('processor.ko' module) takes over, it is forgotten.
> 
> After AMD C1E is detected, it is not sufficient to flag it in boot_cpu_data,
> because the flag will get cleared in identify_cpu() when more CPUs are brought
> up later. The fix is to mark the flag as forced.

I don't think that the workaround is wrong, assuming I'm not missing
something. I'm seeing the following sequence on my machine here in which
the cores are brought up and checked for c1e:

The BSP does

start_kernel()
|->check_bugs()
   |->identify_boot_cpu() 	# here we do select_idle_routine(), i.e. pm_idle = c1e_idle
...
|->rest_init()
   |->kernel_thread(kernel_init,... )

and kernel_init() does smp_init() where we init the rest of the cores.

Now, each core does

start_secondary()
|->smp_callin()
   |->smp_store_cpu_info	# here we copy boot_cpu_data for the starting AP
     |->identify_secondary_cpu
        |->identify_cpu
	   |->select_idle_routine() # here we exit early since pm_idle is set already


now all the cores except the BSP do cpu_idle but since bits 27,28 in the
int pending MSR (see below) are not set yet, they spin a bit in cpu_idle
doing default_idle. You can see this with my debugging patch below.

Now here comes the key moment - the BSP enters cpu_idle _after_ all APs
have been initialized and does set X86_FEATURE_AMDC1E. We haven't set
the c1e_detected variable earlier since the hardware sets bit 28 in
MSR_K8_INT_PENDING_MSG, C1eOnCmpHalt only after all cores have entered
halt. After this bit is set, we set c1e_detected and switch to broadcast
mode on each core.

Now the question is, why does your system doesn't do that in that order?
And I don't think your patch is the right fix - it doesn't change
anything in the above sequence on my system except enabling the "amdc1e"
feature string in /proc/cpuinfo which we don't need actually since dmesg
already contains that info.

And the more puzzling question is, how does your patch fix your
system...?

So, IMHO, what is more likely is that it has something to do with
https://bugzilla.kernel.org/show_bug.cgi?id=15289, as John pointed out
earlier (thanks John, Michal's situation looks quite similar).

So, please apply the debug patch below and send me your whole dmesg to
see what happens. Also, I'd like to see whether the SMI bit (27) in that
same MSR is set so please do when the machine is up

for i in $(seq 0 5); do lsmsr -c $i Int -V 3; done

after installing the x86info tool.

Thanks.

C1E dbg patch:

---
 arch/x86/include/asm/acpi.h |   11 +++++++++--
 arch/x86/kernel/process.c   |   12 ++++++++++++
 2 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index aa2c39d..39b8348 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -123,6 +123,9 @@ extern void acpi_reserve_wakeup_memory(void);
  */
 static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
 {
+
+	pr_err("%s: enter\n", __func__);
+
 	/*
 	 * Early models (<=5) of AMD Opterons are not supposed to go into
 	 * C2 state.
@@ -134,10 +137,14 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
 	    boot_cpu_data.x86_model <= 0x05 &&
 	    boot_cpu_data.x86_mask < 0x0A)
 		return 1;
-	else if (boot_cpu_has(X86_FEATURE_AMDC1E))
+	else if (boot_cpu_has(X86_FEATURE_AMDC1E)) {
+		pr_err("%s: C1E\n", __func__);
 		return 1;
-	else
+	}
+	else {
+		pr_err("%s: max_cstate: %d\n", __func__, max_cstate);
 		return max_cstate;
+	}
 }
 
 static inline bool arch_has_acpi_pdc(void)
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index cfe109d..116c8bd 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -573,6 +573,18 @@ static void c1e_idle(void)
 	if (need_resched())
 		return;
 
+	if (!boot_cpu_has(X86_FEATURE_AMDC1E)) {
+		u32 lo, hi;
+
+		rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
+
+		pr_err("%s: bits 0x%08x\n",
+			__func__, lo & K8_INTP_C1E_ACTIVE_MASK);
+
+		pr_err("%s: cpu: %d, c1e_detected: %d\n",
+			__func__, raw_smp_processor_id(), c1e_detected);
+	}
+
 	if (!c1e_detected) {
 		u32 lo, hi;
 
-- 
1.7.0



-- 
Regards/Gruss,
Boris.

Advanced Micro Devices GmbH
Einsteinring 24, 85609 Dornach
General Managers: Alberto Bozzo, Andrew Bowd
Registration: Dornach, Gemeinde Aschheim, Landkreis Muenchen
Registergericht Muenchen, HRB Nr. 43632

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Michal Schmidt]

On Wed, 14 Jul 2010 18:07:05 +0200 Borislav Petkov wrote:
> I don't think that the workaround is wrong, assuming I'm not missing
> something. I'm seeing the following sequence on my machine here in
> which the cores are brought up and checked for c1e:
> 
> The BSP does
> 
> start_kernel()
> |->check_bugs()
>    |->identify_boot_cpu() 	# here we do select_idle_routine(),
> i.e. pm_idle = c1e_idle ...
> |->rest_init()
>    |->kernel_thread(kernel_init,... )
> 
> and kernel_init() does smp_init() where we init the rest of the cores.
> 
> Now, each core does
> 
> start_secondary()
> |->smp_callin()
>    |->smp_store_cpu_info	# here we copy boot_cpu_data for the
> starting AP |->identify_secondary_cpu
>         |->identify_cpu
> 	   |->select_idle_routine() # here we exit early since
> pm_idle is set already
> 
> 
> now all the cores except the BSP do cpu_idle but since bits 27,28 in
> the int pending MSR (see below) are not set yet, they spin a bit in
> cpu_idle doing default_idle. You can see this with my debugging patch
> below.

On my system I see bit 28 set right at the start. Is it a BIOS bug?
Your debugging patch produces a huge flood of messages, seemingly
neverending.

> Now here comes the key moment - the BSP enters cpu_idle _after_ all
> APs have been initialized and does set X86_FEATURE_AMDC1E. We haven't
> set the c1e_detected variable earlier since the hardware sets bit 28
> in MSR_K8_INT_PENDING_MSG, C1eOnCmpHalt only after all cores have
> entered halt. After this bit is set, we set c1e_detected and switch
> to broadcast mode on each core.
> 
> Now the question is, why does your system doesn't do that in that
> order? And I don't think your patch is the right fix - it doesn't
> change anything in the above sequence on my system except enabling
> the "amdc1e" feature string in /proc/cpuinfo which we don't need
> actually since dmesg already contains that info.

I would not bother using the patch if the only result would be showing
of the "amdc1e" misfeature string in /proc/cpuinfo :-)

> And the more puzzling question is, how does your patch fix your
> system...?

It makes sure that once "boot_cpu_has(X86_FEATURE_AMDC1E)" is true, it
won't ever become false.
To see what I mean see the dmesg I've got with a bit different debugging
patch:

diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index aa2c39d..39b8348 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -123,6 +123,9 @@ extern void acpi_reserve_wakeup_memory(void);
  */
 static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
 {
+
+	pr_err("%s: enter\n", __func__);
+
 	/*
 	 * Early models (<=5) of AMD Opterons are not supposed to go into
 	 * C2 state.
@@ -134,10 +137,14 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
 	    boot_cpu_data.x86_model <= 0x05 &&
 	    boot_cpu_data.x86_mask < 0x0A)
 		return 1;
-	else if (boot_cpu_has(X86_FEATURE_AMDC1E))
+	else if (boot_cpu_has(X86_FEATURE_AMDC1E)) {
+		pr_err("%s: C1E\n", __func__);
 		return 1;
-	else
+	}
+	else {
+		pr_err("%s: max_cstate: %d\n", __func__, max_cstate);
 		return max_cstate;
+	}
 }
 
 static inline bool arch_has_acpi_pdc(void)
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 68e4a6f..cdab554 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -741,6 +741,7 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
 static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 {
 	int i;
+	extern int c1e_detected;
 
 	c->loops_per_jiffy = loops_per_jiffy;
 	c->x86_cache_size = -1;
@@ -829,6 +830,8 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 		c->x86_capability[i] |= cpu_caps_set[i];
 	}
 
+	pr_err("%s: before ANDing, c1e_detected: %d, boot_cpu_has(C1E): %d\n",
+		__func__, c1e_detected, boot_cpu_has(X86_FEATURE_AMDC1E));
 	/*
 	 * On SMP, boot_cpu_data holds the common feature set between
 	 * all CPUs; so make sure that we indicate which features are
@@ -840,6 +843,8 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 		for (i = 0; i < NCAPINTS; i++)
 			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
 	}
+	pr_err("%s:  after ANDing, c1e_detected: %d, boot_cpu_has(C1E): %d\n",
+		__func__, c1e_detected, boot_cpu_has(X86_FEATURE_AMDC1E));
 
 	/* Init Machine Check Exception if available. */
 	mcheck_cpu_init(c);
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index e7e3521..4235703 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -562,7 +562,7 @@ no_c1e_idle:
 }
 
 static cpumask_var_t c1e_mask;
-static int c1e_detected;
+int c1e_detected;
 
 void c1e_remove_cpu(int cpu)
 {
@@ -584,6 +584,13 @@ static void c1e_idle(void)
 		u32 lo, hi;
 
 		rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
+
+		pr_err("%s: cpu: %d, bits 0x%08x, "
+		       "c1e_detected: %d, boot_cpu_has(C1E): %d\n",
+			__func__, raw_smp_processor_id(),
+			lo & K8_INTP_C1E_ACTIVE_MASK, c1e_detected,
+			boot_cpu_has(X86_FEATURE_AMDC1E));
+
 		if (lo & K8_INTP_C1E_ACTIVE_MASK) {
 			c1e_detected = 1;
 			if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))

Here's the dmesg:

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.35-rc5+ (michich@hammerfall) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #28 SMP Wed Jul 14 22:45:41 CEST 2010
Command line: root=/dev/mapper/hammervg-F11root ro SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us sysrq_always_enabled fbcon=map:0 3
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
 BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000afd90000 (usable)
 BIOS-e820: 00000000afd90000 - 00000000afda8000 (ACPI data)
 BIOS-e820: 00000000afda8000 - 00000000afdd0000 (ACPI NVS)
 BIOS-e820: 00000000afdd0000 - 00000000afe00000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000150000000 (usable)
NX (Execute Disable) protection: active
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x150000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFE0000000 write-back
  2 base 0000A0000000 mask FFFFF0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000150000000 aka 5376M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000b0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xafd90 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000afd90000
 0000000000 - 0080000000 page 1G
 0080000000 - 00afc00000 page 2M
 00afc00000 - 00afd90000 page 4k
kernel direct mapping tables up to afd90000 @ 16000-19000
init_memory_mapping: 0000000100000000-0000000150000000
 0100000000 - 0140000000 page 1G
 0140000000 - 0150000000 page 2M
kernel direct mapping tables up to 150000000 @ 18000-1a000
RAMDISK: 37254000 - 37ff0000
ACPI: RSDP 00000000000fbad0 00024 (v02 ACPIAM)
ACPI: XSDT 00000000afd90100 00064 (v01 051710 XSDT1915 20100517 MSFT 00000097)
ACPI: FACP 00000000afd90290 000F4 (v03 051710 FACP1915 20100517 MSFT 00000097)
ACPI: DSDT 00000000afd90460 0F13B (v01  A1656 A1656000 00000000 INTL 20060113)
ACPI: FACS 00000000afda8000 00040
ACPI: APIC 00000000afd90390 00088 (v01 051710 APIC1915 20100517 MSFT 00000097)
ACPI: MCFG 00000000afd90420 0003C (v01 051710 OEMMCFG  20100517 MSFT 00000097)
ACPI: OEMB 00000000afda8040 00072 (v01 051710 OEMB1915 20100517 MSFT 00000097)
ACPI: SRAT 00000000afd9f8b0 00108 (v01 AMD    FAM_F_10 00000002 AMD  00000001)
ACPI: HPET 00000000afd9f9c0 00038 (v01 051710 OEMHPET  20100517 MSFT 00000097)
ACPI: IVRS 00000000afd9fa00 000D8 (v01  AMD     RD890S 00202031 AMD  00000000)
ACPI: SSDT 00000000afd9fae0 00DA4 (v01 A M I  POWERNOW 00000001 AMD  00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-b0000000
SRAT: Node 0 PXM 0 100000000-150000000
SRAT: Node 0 [0,a0000) + [100000,b0000000) -> [0,b0000000)
SRAT: Node 0 [0,b0000000) + [100000000,150000000) -> [0,150000000)
NUMA: Using 63 for the hash shift.
Initmem setup node 0 0000000000000000-0000000150000000
  NODE_DATA [0000000100000000 - 0000000100014fff]
  bootmap [0000000100015000 -  000000010003efff] pages 2a
(14/32 early reservations) ==> bootmem [0000000000 - 0150000000]
  #0 [0001000000 - 0002a33900]    TEXT DATA BSS ==> [0001000000 - 0002a33900]
  #1 [0037254000 - 0037ff0000]          RAMDISK ==> [0037254000 - 0037ff0000]
  #2 [0002a34000 - 0002a343bf]              BRK ==> [0002a34000 - 0002a343bf]
  #3 [00000ff790 - 0000100000]    BIOS reserved ==> [00000ff790 - 0000100000]
  #4 [00000ff780 - 00000ff790]     MP-table mpf ==> [00000ff780 - 00000ff790]
  #5 [000009b000 - 00000f06e0]    BIOS reserved ==> [000009b000 - 00000f06e0]
  #6 [00000f0914 - 00000ff780]    BIOS reserved ==> [00000f0914 - 00000ff780]
  #7 [00000f06e0 - 00000f0914]     MP-table mpc ==> [00000f06e0 - 00000f0914]
  #8 [0000010000 - 0000012000]       TRAMPOLINE ==> [0000010000 - 0000012000]
  #9 [0000012000 - 0000016000]      ACPI WAKEUP ==> [0000012000 - 0000016000]
  #10 [0000016000 - 0000018000]          PGTABLE ==> [0000016000 - 0000018000]
  #11 [0000018000 - 0000019000]          PGTABLE ==> [0000018000 - 0000019000]
  #12 [0100000000 - 0100015000]        NODE_DATA ==> [0100000000 - 0100015000]
  #13 [0100015000 - 010003f000]          BOOTMAP ==> [0100015000 - 010003f000]
 [ffffea0000000000-ffffea00049fffff] PMD -> [ffff880100600000-ffff880103ffffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00150000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009b
    0: 0x00000100 -> 0x000afd90
    0: 0x00100000 -> 0x00150000
On node 0 totalpages: 1047835
  DMA zone: 56 pages used for memmap
  DMA zone: 108 pages reserved
  DMA zone: 3815 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 701896 pages, LIFO batch:31
  Normal zone: 4480 pages used for memmap
  Normal zone: 323200 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 6 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000afd90000 - 00000000afda8000
PM: Registered nosave memory: 00000000afda8000 - 00000000afdd0000
PM: Registered nosave memory: 00000000afdd0000 - 00000000afe00000
PM: Registered nosave memory: 00000000afe00000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at afe00000 (gap: afe00000:50000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 478 pages/cpu @ffff880002c00000 s1927232 r8192 d22464 u2097152
pcpu-alloc: s1927232 r8192 d22464 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1028911
Policy zone: Normal
Kernel command line: root=/dev/mapper/hammervg-F11root ro SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us sysrq_always_enabled fbcon=map:0 3
sysrq: sysrq always enabled.
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 20000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Memory: 3947060k/5505024k available (4584k kernel code, 1313684k absent, 244280k reserved, 7298k data, 2756k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU lockdep checking is enabled.
	RCU-based detection of stalled CPUs is disabled.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:33024 nr_irqs:1272
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     16384
... MAX_LOCKDEP_CHAINS:      32768
... CHAINHASH_SIZE:          16384
 memory used by lock dependency info: 6367 kB
 per task-struct memory footprint: 2688 bytes
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
ODEBUG: 15 of 15 active objects replaced
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3611.646 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6420.69 BogoMIPS (lpj=3210348)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
identify_cpu: before ANDing, c1e_detected: 0, boot_cpu_has(C1E): 0
identify_cpu:  after ANDing, c1e_detected: 0, boot_cpu_has(C1E): 0
mce: CPU supports 6 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
ACPI: Core revision 20100428
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20786 entries in 82 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00
lockdep: fixing up alternatives.

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
kernel/sched.c:616 invoked rcu_dereference_check() without protection!

other info that might help us debug this:


rcu_scheduler_active = 1, debug_locks = 0
3 locks held by swapper/1:
 #0:  (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff81051782>] cpu_maps_update_begin+0x17/0x19
 #1:  (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff810517c7>] cpu_hotplug_begin+0x2c/0x53
 #2:  (&rq->lock){-.....}, at: [<ffffffff8146a2a5>] init_idle+0x30/0x136

stack backtrace:
Pid: 1, comm: swapper Not tainted 2.6.35-rc5+ #28
Call Trace:
 [<ffffffff8107b382>] lockdep_rcu_dereference+0xaa/0xb2
 [<ffffffff8103efa5>] task_group+0x80/0x8f
 [<ffffffff8146a2a5>] ? init_idle+0x30/0x136
 [<ffffffff8103efcb>] set_task_rq+0x17/0x73
 [<ffffffff8146a364>] init_idle+0xef/0x136
 [<ffffffff8146a781>] fork_idle+0xbd/0xce
 [<ffffffff8107ba4b>] ? mark_held_locks+0x52/0x70
 [<ffffffff81468d66>] do_fork_idle+0x1c/0x2d
 [<ffffffff8146817f>] do_boot_cpu+0x145/0xa3b
 [<ffffffff8110ca08>] ? alloc_page_interleave+0x79/0x86
 [<ffffffff81468d4a>] ? do_fork_idle+0x0/0x2d
 [<ffffffff81468b70>] native_cpu_up+0xfb/0x1ce
 [<ffffffff8146a862>] _cpu_up+0xa0/0x115
 [<ffffffff8146a9ad>] cpu_up+0xd6/0xe8
 [<ffffffff81d73695>] kernel_init+0x105/0x231
 [<ffffffff8100aa64>] kernel_thread_helper+0x4/0x10
 [<ffffffff81471ed0>] ? restore_args+0x0/0x30
 [<ffffffff81d73590>] ? kernel_init+0x0/0x231
 [<ffffffff8100aa60>] ? kernel_thread_helper+0x0/0x10
Booting Node   0, Processors  #1
identify_cpu: before ANDing, c1e_detected: 0, boot_cpu_has(C1E): 0
identify_cpu:  after ANDing, c1e_detected: 0, boot_cpu_has(C1E): 0
c1e_idle: cpu: 1, bits 0x10000000, c1e_detected: 0, boot_cpu_has(C1E): 0
lockdep: fixing up alternatives.
 #2
System has AMD C1E enabled
Switch to broadcast mode on CPU1
identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 1
identify_cpu:  after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
Switch to broadcast mode on CPU2
lockdep: fixing up alternatives.
 #3
identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
identify_cpu:  after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
Switch to broadcast mode on CPU3
lockdep: fixing up alternatives.
 #4
identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
identify_cpu:  after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
Switch to broadcast mode on CPU4
lockdep: fixing up alternatives.
 #5 Ok.
identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
identify_cpu:  after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
Brought up 6 CPUs
Switch to broadcast mode on CPU5
Total of 6 processors activated (38528.67 BogoMIPS).
Switch to broadcast mode on CPU0
devtmpfs: initialized
atomic64 test passed for x86-64 platform with CX8 and with SSE
Time: 20:54:48  Date: 07/14/10
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000b0000000 aka 2816M
Fam 10h mmconf [e0000000, efffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [b0000000, dfffffff]
TOM2: 0000000150000000 aka 5376M
bus: [00, 07] on node 0 link 0
bus: 00 index 0 [io  0x0000-0xffff]
bus: 00 index 1 [mem 0xf0000000-0xffffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
bus: 00 index 3 [mem 0xb0000000-0xdfffffff]
bus: 00 index 4 [mem 0x150000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Error (dswload-0677): [PCI0] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20100428/psloop-231)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff8298c190), AE_NOT_FOUND
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
ACPI Warning: Incorrect checksum in table [OEMB] - 0x18, should be 0x17 (20100428/tbutils-314)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xafe00000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:11.0: reg 10: [io  0x9000-0x9007]
pci 0000:00:11.0: reg 14: [io  0x8000-0x8003]
pci 0000:00:11.0: reg 18: [io  0x7000-0x7007]
pci 0000:00:11.0: reg 1c: [io  0x6000-0x6003]
pci 0000:00:11.0: reg 20: [io  0x5000-0x500f]
pci 0000:00:11.0: reg 24: [mem 0xfe2fe000-0xfe2fe3ff]
pci 0000:00:12.0: reg 10: [mem 0xfe2f7000-0xfe2f7fff]
pci 0000:00:12.2: reg 10: [mem 0xfe2fe400-0xfe2fe4ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0xfe2fc000-0xfe2fcfff]
pci 0000:00:13.2: reg 10: [mem 0xfe2fe800-0xfe2fe8ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.2: reg 10: [mem 0xfe2f8000-0xfe2fbfff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.5: reg 10: [mem 0xfe2fd000-0xfe2fdfff]
pci 0000:00:16.0: reg 10: [mem 0xfe2ff000-0xfe2fffff]
pci 0000:00:16.2: reg 10: [mem 0xfe2fec00-0xfe2fecff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: PME# disabled
pci 0000:07:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:07:00.0: reg 18: [mem 0xfe9f0000-0xfe9fffff 64bit]
pci 0000:07:00.0: reg 20: [io  0xe000-0xe0ff]
pci 0000:07:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.1: reg 10: [mem 0xfe9ec000-0xfe9effff 64bit]
pci 0000:07:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 07-07]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:06:00.0: reg 24: [mem 0xfe8fe000-0xfe8fffff]
pci 0000:06:00.0: PME# supported from D3hot
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.1: reg 10: [io  0xdc00-0xdc07]
pci 0000:06:00.1: reg 14: [io  0xd880-0xd883]
pci 0000:06:00.1: reg 18: [io  0xd800-0xd807]
pci 0000:06:00.1: reg 1c: [io  0xd480-0xd483]
pci 0000:06:00.1: reg 20: [io  0xd400-0xd40f]
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:04.0: PCI bridge to [bus 06-06]
pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:04.0:   bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:04.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: reg 10: [mem 0xfe7ff800-0xfe7fffff 64bit]
pci 0000:05:00.0: reg 18: [io  0xc800-0xc8ff]
pci 0000:05:00.0: supports D2
pci 0000:05:00.0: PME# supported from D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:05.0: PCI bridge to [bus 05-05]
pci 0000:00:05.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:05.0:   bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:05.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [io  0xb800-0xb8ff]
pci 0000:04:00.0: reg 18: [mem 0xcffff000-0xcfffffff 64bit pref]
pci 0000:04:00.0: reg 20: [mem 0xcfff8000-0xcfffbfff 64bit pref]
pci 0000:04:00.0: reg 30: [mem 0xfe6e0000-0xfe6fffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:06.0: PCI bridge to [bus 04-04]
pci 0000:00:06.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:06.0:   bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:06.0:   bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
pci 0000:03:00.0: reg 10: [mem 0xfe5fe000-0xfe5fffff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:07.0:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:07.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:02:00.0: reg 18: [mem 0xfe4f0000-0xfe4fffff 64bit]
pci 0000:02:00.0: reg 20: [io  0xa000-0xa0ff]
pci 0000:02:00.0: reg 30: [mem 0xfe4c0000-0xfe4dffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: reg 10: [mem 0xfe4e0000-0xfe4effff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:0b.0: PCI bridge to [bus 02-02]
pci 0000:00:0b.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:0b.0:   bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:0b.0:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:01:06.0: reg 10: [mem 0xfe3fe000-0xfe3fffff]
pci 0000:01:06.0: supports D1 D2
pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:06.0: PME# disabled
pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:14.4:   bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xafe00000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled.
HEST: Table is not found!
vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009b000 - 000000000009ffff 
reserve RAM buffer: 00000000afd90000 - 00000000afffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:02: [mem 0xf6000000-0xf6003fff] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: [io  0x04d0-0x04d1] has been reserved
system 00:0a: [io  0x040b] has been reserved
system 00:0a: [io  0x04d6] has been reserved
system 00:0a: [io  0x0c00-0x0c01] has been reserved
system 00:0a: [io  0x0c14] has been reserved
system 00:0a: [io  0x0c50-0x0c51] has been reserved
system 00:0a: [io  0x0c52] has been reserved
system 00:0a: [io  0x0c6c] has been reserved
system 00:0a: [io  0x0c6f] has been reserved
system 00:0a: [io  0x0cd0-0x0cd1] has been reserved
system 00:0a: [io  0x0cd2-0x0cd3] has been reserved
system 00:0a: [io  0x0cd4-0x0cd5] has been reserved
system 00:0a: [io  0x0cd6-0x0cd7] has been reserved
system 00:0a: [io  0x0cd8-0x0cdf] has been reserved
system 00:0a: [io  0x0800-0x089f] has been reserved
system 00:0a: [io  0x0b00-0x0b1f] has been reserved
system 00:0a: [io  0x0b20-0x0b3f] has been reserved
system 00:0a: [io  0x0900-0x090f] has been reserved
system 00:0a: [io  0x0910-0x091f] has been reserved
system 00:0a: [io  0xfe00-0xfefe] has been reserved
system 00:0a: [mem 0xafe00000-0xafefffff] has been reserved
system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:0a: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:0a: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:0d: [io  0x0230-0x023f] has been reserved
system 00:0d: [io  0x0290-0x029f] has been reserved
system 00:0d: [io  0x0f40-0x0f4f] has been reserved
system 00:0d: [io  0x0a30-0x0a3f] has been reserved
system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0f: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0f: [mem 0x00100000-0xafdfffff] could not be reserved
system 00:0f: [mem 0xfec00000-0xffffffff] could not be reserved
pci 0000:00:02.0: PCI bridge to [bus 07-07]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 06-06]
pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:04.0:   bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:04.0:   bridge window [mem pref disabled]
pci 0000:00:05.0: PCI bridge to [bus 05-05]
pci 0000:00:05.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:05.0:   bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:05.0:   bridge window [mem pref disabled]
pci 0000:00:06.0: PCI bridge to [bus 04-04]
pci 0000:00:06.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:06.0:   bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:06.0:   bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0:   bridge window [io  disabled]
pci 0000:00:07.0:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:07.0:   bridge window [mem pref disabled]
pci 0000:00:0b.0: PCI bridge to [bus 02-02]
pci 0000:00:0b.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:0b.0:   bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:0b.0:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 01-01]
pci 0000:00:14.4:   bridge window [io  disabled]
pci 0000:00:14.4:   bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:14.4:   bridge window [mem pref disabled]
  alloc irq_desc for 52 on node 0
  alloc kstat_irqs on node 0
pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
pci 0000:00:05.0: setting latency timer to 64
  alloc irq_desc for 53 on node 0
  alloc kstat_irqs on node 0
pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:07.0: setting latency timer to 64
  alloc irq_desc for 54 on node 0
  alloc kstat_irqs on node 0
pci 0000:00:0b.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
pci 0000:00:0b.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xafe00000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:07: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:04: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:02: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
pci_bus 0000:01: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xafe00000-0xdfffffff]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 10, 4718592 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 6, 327680 bytes)
UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes)
NET: Registered protocol family 1
pci 0000:07:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13936k freed
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
  alloc irq_desc for 55 on node 0
  alloc kstat_irqs on node 0
pci 0000:00:00.2: PCI INT A -> GSI 55 (level, low) -> IRQ 55
  alloc irq_desc for 72 on node 0
  alloc kstat_irqs on node 0
pci 0000:00:00.2: irq 72 for MSI/MSI-X
AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Lazy IO/TLB flushing enabled
audit: initializing netlink socket (disabled)
type=2000 audit(1279140889.031:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7865
cryptomgr_test used greatest stack depth: 6088 bytes left
cryptomgr_test used greatest stack depth: 5936 bytes left
cryptomgr_test used greatest stack depth: 5736 bytes left
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
  alloc irq_desc for 73 on node 0
  alloc kstat_irqs on node 0
pcieport 0000:00:02.0: irq 73 for MSI/MSI-X
pcieport 0000:00:04.0: setting latency timer to 64
  alloc irq_desc for 74 on node 0
  alloc kstat_irqs on node 0
pcieport 0000:00:04.0: irq 74 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
  alloc irq_desc for 75 on node 0
  alloc kstat_irqs on node 0
pcieport 0000:00:05.0: irq 75 for MSI/MSI-X
pcieport 0000:00:06.0: setting latency timer to 64
  alloc irq_desc for 76 on node 0
  alloc kstat_irqs on node 0
pcieport 0000:00:06.0: irq 76 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
  alloc irq_desc for 77 on node 0
  alloc kstat_irqs on node 0
pcieport 0000:00:07.0: irq 77 for MSI/MSI-X
pcieport 0000:00:0b.0: setting latency timer to 64
  alloc irq_desc for 78 on node 0
  alloc kstat_irqs on node 0
pcieport 0000:00:0b.0: irq 78 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
acpi_processor_cstate_check: enter
acpi_processor_cstate_check: max_cstate: 8
ERST: Table is not found!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: version 3.0
  alloc irq_desc for 19 on node 0
  alloc kstat_irqs on node 0
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  alloc irq_desc for 79 on node 0
  alloc kstat_irqs on node 0
ahci 0000:00:11.0: irq 79 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe2fe000 port 0xfe2fe100 irq 79
ata2: SATA max UDMA/133 abar m1024@0xfe2fe000 port 0xfe2fe180 irq 79
ata3: SATA max UDMA/133 abar m1024@0xfe2fe000 port 0xfe2fe200 irq 79
ata4: SATA max UDMA/133 abar m1024@0xfe2fe000 port 0xfe2fe280 irq 79
ata5: SATA max UDMA/133 abar m1024@0xfe2fe000 port 0xfe2fe300 irq 79
ata6: SATA max UDMA/133 abar m1024@0xfe2fe000 port 0xfe2fe380 irq 79
work_for_cpu used greatest stack depth: 5552 bytes left
  alloc irq_desc for 44 on node 0
  alloc kstat_irqs on node 0
ahci 0000:06:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
ahci 0000:06:00.0: JMB361 has only one port
ahci 0000:06:00.0: forcing port_map 0x3 -> 0x1
ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
ahci 0000:06:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe100 irq 44
ata8: DUMMY
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  alloc irq_desc for 17 on node 0
  alloc kstat_irqs on node 0
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe2fe400
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.35-rc5+ ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
work_for_cpu used greatest stack depth: 4968 bytes left
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe2fe800
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.35-rc5+ ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe2fec00
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.35-rc5+ ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  alloc irq_desc for 18 on node 0
  alloc kstat_irqs on node 0
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe2f7000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.35-rc5+ ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe2fc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.35-rc5+ ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe2fd000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.35-rc5+ ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
work_for_cpu used greatest stack depth: 4744 bytes left
ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe2ff000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.35-rc5+ ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
  Magic number: 2:72:953
rtc_cmos 00:04: setting system clock to 2010-07-14 20:54:50 UTC (1279140890)
Initalizing network drop monitor service
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST31000340AS, SD15, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST31000340AS     SD15 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  1AA0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
 sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 2756k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1540k freed
Freeing unused kernel memory: 1832k freed
dracut: dracut-005-3.fc13
udev: starting version 151
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
  alloc irq_desc for 24 on node 0
  alloc kstat_irqs on node 0
radeon 0000:07:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
radeon 0000:07:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV770 0x1002:0x9442).
[drm] register mmio base: 0xFE9F0000
[drm] register mmio size: 65536
ATOM BIOS: HD4850
[drm] Clocks initialized !
radeon 0000:07:00.0: VRAM: 1024M 0x00000000 - 0x3FFFFFFF (1024M used)
radeon 0000:07:00.0: GTT: 512M 0x40000000 - 0x5FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone  kernel: Available graphics memory: 2016538 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
  alloc irq_desc for 80 on node 0
  alloc kstat_irqs on node 0
radeon 0000:07:00.0: irq 80 for MSI/MSI-X
[drm] radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV770 Microcode
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
[drm] Default TV standard: PAL
[drm] Default TV standard: PAL
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   DVI-I
[drm]   HPD2
[drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm]     DFP2: INTERNAL_KLDSCP_LVTMA
[drm] Connector 1:
[drm]   HDMI-A
[drm]   HPD3
[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm]   VGA
[drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm]   Encoders:
[drm]     CRT2: INTERNAL_KLDSCP_DAC2
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 7258112
[drm] fb depth is 24
[drm]    pitch is 6912
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
Console: switching to colour frame buffer device 210x65
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized radeon 2.5.0 20080528 for 0000:07:00.0 on minor 0
work_for_cpu used greatest stack depth: 4040 bytes left
radeon 0000:02:00.0: enabling device (0000 -> 0003)
  alloc irq_desc for 32 on node 0
  alloc kstat_irqs on node 0
radeon 0000:02:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
radeon 0000:02:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV380 0x1002:0x5B62).
[drm] register mmio base: 0xFE4F0000
[drm] register mmio size: 65536
[drm] GPU not posted. posting now...
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:02:00.0: VRAM: 256M 0xB0000000 - 0xBFFFFFFF (256M used)
radeon 0000:02:00.0: GTT: 512M 0x90000000 - 0xAFFFFFFF
  alloc irq_desc for 81 on node 0
  alloc kstat_irqs on node 0
radeon 0000:02:00.0: irq 81 for MSI/MSI-X
[drm] radeon: using MSI.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 128bits DDR
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0xB0040000).
[drm] Loading R300 Microcode
[drm] radeon: ring at 0x0000000090000000
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] DFP table revision: 4
[drm] External TMDS Table revision: 2
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   DVI-I
[drm]   HPD1
[drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[drm]   Encoders:
[drm]     CRT2: INTERNAL_DAC2
[drm]     DFP1: INTERNAL_TMDS1
[drm] Connector 1:
[drm]   DVI-I
[drm]   HPD2
[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm]   Encoders:
[drm]     CRT1: INTERNAL_DAC1
[drm]     DFP2: INTERNAL_DVO1
[drm] fb mappable at 0xB00C0000
[drm] vram apper at 0xB0000000
[drm] size 3145728
[drm] fb depth is 24
[drm]    pitch is 4096
fb1: radeondrmfb frame buffer device
[drm] Initialized radeon 2.5.0 20080528 for 0000:02:00.0 on minor 1
dracut: Starting plymouth daemon
pata_jmicron 0000:06:00.1: enabling device (0000 -> 0001)
  alloc irq_desc for 45 on node 0
  alloc kstat_irqs on node 0
pata_jmicron 0000:06:00.1: PCI INT B -> GSI 45 (level, low) -> IRQ 45
pata_jmicron 0000:06:00.1: BMDMA: failed to set dma mask, falling back to PIO
pata_jmicron 0000:06:00.1: setting latency timer to 64
  alloc irq_desc for 46 on node 0
  alloc kstat_irqs on node 0
firewire_ohci 0000:05:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46
firewire_ohci 0000:05:00.0: setting latency timer to 64
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max PIO4 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 45
ata10: PATA max PIO4 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 45
work_for_cpu used greatest stack depth: 3960 bytes left
firewire_ohci: Added fw-ohci device 0000:05:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1
ata9.00: ATAPI: HL-DT-ST DVDRAM GSA-4160B, A302, max UDMA/66
ata9.00: configured for PIO4
scsi 8:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4160B A302 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 8:0:0:0: Attached scsi CD-ROM sr0
sr 8:0:0:0: Attached scsi generic sg2 type 5
dracut: Scanning devices sda2 sda3  for LVM volume groups 
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "hammervg" using metadata type lvm2
firewire_core: created device fw0: GUID 001e8c00002f03ae, S400
dracut: 12 logical volume(s) in volume group "hammervg" now active
EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/mapper/hammervg-F11root
dracut: Loading SELinux policy
type=1404 audit(1279140894.460:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 196917 rules.
SELinux: 2048 avtab hash slots, 196917 rules.
SELinux:  9 users, 13 roles, 3276 types, 160 bools, 1 sens, 1024 cats
SELinux:  77 classes, 196917 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev dm-8, type ext4), uses xattr
type=1403 audit(1279140895.138:3): policy loaded auid=4294967295 ses=4294967295
load_policy used greatest stack depth: 3712 bytes left
dracut: Switching root
readahead: starting
udev: starting version 151
ACPI: WMI: Mapper loaded
microcode: CPU0: patch_level=0x10000bf
ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SMRG [irq 2816-2863 64bit pref]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
input: PC Speaker as /devices/platform/pcspkr/input/input4
type=1400 audit(1279140905.936:4): avc:  denied  { mmap_zero } for  pid=620 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
type=1400 audit(1279140905.936:5): avc:  denied  { mmap_zero } for  pid=644 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
ATK0110 ATK0110:00: EC enabled
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  alloc irq_desc for 51 on node 0
  alloc kstat_irqs on node 0
r8169 0000:04:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: (unregistered net_device): unknown MAC, using family default
  alloc irq_desc for 82 on node 0
  alloc kstat_irqs on node 0
r8169 0000:04:00.0: irq 82 for MSI/MSI-X
r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc90013cf8000, 48:5b:39:a7:39:f1, XID 0c100000 IRQ 82
udev: renamed network interface eth0 to eth2
cfg80211: Calling CRDA to update world regulatory domain
microcode: CPU1: patch_level=0x10000bf
microcode: CPU2: patch_level=0x10000bf
microcode: CPU3: patch_level=0x10000bf
microcode: CPU4: patch_level=0x10000bf
microcode: CPU5: patch_level=0x10000bf
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
microcode: AMD microcode update via /dev/cpu/microcode not supported
microcode: AMD microcode update via /dev/cpu/microcode not supported
microcode: AMD microcode update via /dev/cpu/microcode not supported
microcode: AMD microcode update via /dev/cpu/microcode not supported
microcode: AMD microcode update via /dev/cpu/microcode not supported
microcode: AMD microcode update via /dev/cpu/microcode not supported
microcode: AMD microcode update via /dev/cpu/microcode not supported
  alloc irq_desc for 50 on node 0
  alloc kstat_irqs on node 0
xhci_hcd 0000:03:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
xhci_hcd 0000:03:00.0: setting latency timer to 64
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:03:00.0: irq 50, io mem 0xfe5fe000
usb usb8: No SuperSpeed endpoint companion for config 1  interface 0 altsetting 0 ep 129: using minimum values
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.35-rc5+ xhci_hcd
usb usb8: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 4 ports detected
cfg80211: World regulatory domain updated:
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  alloc irq_desc for 21 on node 0
  alloc kstat_irqs on node 0
p54pci 0000:01:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
phy0: p54 detected a LM86 firmware
p54: rx_mtu reduced from 3240 to 2376
phy0: FW rev 2.13.12.0 - Softmac protocol 5.9
phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES
CE: hpet increased min_delta_ns to 7500 nsec
CE: hpet increased min_delta_ns to 11250 nsec
CE: hpet increased min_delta_ns to 16875 nsec
md: bind<sda4>
md: raid1 personality registered for level 1
md/raid1:md0: active with 1 out of 2 mirrors
md0: detected capacity change from 0 to 120031412224
 md0: unknown partition table
phy0: hwaddr 00:60:b3:1c:2a:10, MAC:isl3890 RF:Frisbee
phy0: Selected rate control algorithm 'minstrel'
Registered led device: p54-phy0::assoc
Registered led device: p54-phy0::tx
Registered led device: p54-phy0::rx
Registered led device: p54-phy0::radio
p54pci 0000:01:06.0: is registered as 'phy0'
cfg80211: Calling CRDA for country: CZ
cfg80211: Regulatory domain changed to country: CZ
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
    (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
    (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2301 mBm)
    (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 3000 mBm)
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
EXT4-fs (dm-8): re-mounted. Opts: (null)
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with ordered data mode
SELinux: initialized (dev sda1, type ext3), uses xattr
Adding 1048572k swap on /dev/mapper/hammervg-swap.  Priority:-1 extents:1 across:1048572k 
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor (6 cpu cores) (version 2.20.00)
powernow-k8: Core Performance Boosting: on.
powernow-k8:    0 : pstate 0 (3200 MHz)
powernow-k8:    1 : pstate 1 (2400 MHz)
powernow-k8:    2 : pstate 2 (1600 MHz)
powernow-k8:    3 : pstate 3 (800 MHz)
r8169 0000:04:00.0: eth2: link down
wlan0: direct probe to 00:25:9c:ca:c8:7e (try 1)
wlan0: direct probe responded
wlan0: authenticate with 00:25:9c:ca:c8:7e (try 1)
wlan0: authenticated
wlan0: associate with 00:25:9c:ca:c8:7e (try 1)
wlan0: RX AssocResp from 00:25:9c:ca:c8:7e (capab=0x411 status=0 aid=1)
wlan0: associated
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sdb1, type ext4), uses xattr


> So, IMHO, what is more likely is that it has something to do with
> https://bugzilla.kernel.org/show_bug.cgi?id=15289, as John pointed out
> earlier (thanks John, Michal's situation looks quite similar).
> 
> So, please apply the debug patch below and send me your whole dmesg to
> see what happens. Also, I'd like to see whether the SMI bit (27) in
> that same MSR is set so please do when the machine is up
> 
> for i in $(seq 0 5); do lsmsr -c $i Int -V 3; done

IntPendingMessage    = 0x0000000014c10815
  IOMsgAddr=0x815
  IOMsgData=0xc1
  IntrPndMsgDis=0
  IntrPndMsg=0
  IORd=0x1
  SmiOnCmpHalt=0
IntPendingMessage    = 0x0000000014c10815
  IOMsgAddr=0x815
  IOMsgData=0xc1
  IntrPndMsgDis=0
  IntrPndMsg=0
  IORd=0x1
  SmiOnCmpHalt=0
IntPendingMessage    = 0x0000000014c10815
  IOMsgAddr=0x815
  IOMsgData=0xc1
  IntrPndMsgDis=0
  IntrPndMsg=0
  IORd=0x1
  SmiOnCmpHalt=0
IntPendingMessage    = 0x0000000014c10815
  IOMsgAddr=0x815
  IOMsgData=0xc1
  IntrPndMsgDis=0
  IntrPndMsg=0
  IORd=0x1
  SmiOnCmpHalt=0
IntPendingMessage    = 0x0000000014c10815
  IOMsgAddr=0x815
  IOMsgData=0xc1
  IntrPndMsgDis=0
  IntrPndMsg=0
  IORd=0x1
  SmiOnCmpHalt=0
IntPendingMessage    = 0x0000000014c10815
  IOMsgAddr=0x815
  IOMsgData=0xc1
  IntrPndMsgDis=0
  IntrPndMsg=0
  IORd=0x1
  SmiOnCmpHalt=0


Michal

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Michal Schmidt]

On Wed, 14 Jul 2010 23:22:01 +0200 Michal Schmidt wrote:
> identify_cpu: before ANDing, c1e_detected: 0, boot_cpu_has(C1E): 0
> identify_cpu:  after ANDing, c1e_detected: 0, boot_cpu_has(C1E): 0
> c1e_idle: cpu: 1, bits 0x10000000, c1e_detected: 0,
> boot_cpu_has(C1E): 0 lockdep: fixing up alternatives.
>  #2
> System has AMD C1E enabled
> Switch to broadcast mode on CPU1
> identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 1
> identify_cpu:  after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
> Switch to broadcast mode on CPU2
> lockdep: fixing up alternatives.
>  #3
> identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
> identify_cpu:  after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
> Switch to broadcast mode on CPU3
> lockdep: fixing up alternatives.
>  #4
> identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
> identify_cpu:  after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
> Switch to broadcast mode on CPU4
> lockdep: fixing up alternatives.
>  #5 Ok.
> identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
> identify_cpu:  after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
> Brought up 6 CPUs
> Switch to broadcast mode on CPU5
> Total of 6 processors activated (38528.67 BogoMIPS).
> Switch to broadcast mode on CPU0

This suggests that another way to fix my problem would be this (tested):

diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index aa2c39d..92091de 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -134,7 +134,7 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
 	    boot_cpu_data.x86_model <= 0x05 &&
 	    boot_cpu_data.x86_mask < 0x0A)
 		return 1;
-	else if (boot_cpu_has(X86_FEATURE_AMDC1E))
+	else if (c1e_detected)
 		return 1;
 	else
 		return max_cstate;
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 7e5c6a6..336851e 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -762,6 +762,7 @@ extern void init_c1e_mask(void);
 extern unsigned long		boot_option_idle_override;
 extern unsigned long		idle_halt;
 extern unsigned long		idle_nomwait;
+extern int			c1e_detected;
 
 /*
  * on systems with caches, caches must be flashed as the absolute
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index e7e3521..7667977 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -561,8 +561,10 @@ no_c1e_idle:
 	return 0;
 }
 
+int c1e_detected;
+EXPORT_SYMBOL(c1e_detected);
+
 static cpumask_var_t c1e_mask;
-static int c1e_detected;
 
 void c1e_remove_cpu(int cpu)
 {
@@ -589,7 +591,6 @@ static void c1e_idle(void)
 			if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
 				mark_tsc_unstable("TSC halt in AMD C1E");
 			printk(KERN_INFO "System has AMD C1E enabled\n");
-			set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E);
 		}
 	}
 
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index b1b3856..7cd95eb 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -159,7 +159,7 @@ static void lapic_timer_check_state(int state, struct acpi_processor *pr,
 	if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
 		return;
 
-	if (boot_cpu_has(X86_FEATURE_AMDC1E))
+	if (c1e_detected)
 		type = ACPI_STATE_C1;
 
 	/*

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Borislav Petkov]

From: Michal Schmidt <mschmidt@redhat.com>
Date: Wed, Jul 14, 2010 at 05:31:02PM -0400

> On Wed, 14 Jul 2010 23:22:01 +0200 Michal Schmidt wrote:
> > identify_cpu: before ANDing, c1e_detected: 0, boot_cpu_has(C1E): 0
> > identify_cpu:  after ANDing, c1e_detected: 0, boot_cpu_has(C1E): 0
> > c1e_idle: cpu: 1, bits 0x10000000, c1e_detected: 0,
> > boot_cpu_has(C1E): 0 lockdep: fixing up alternatives.

[..]

> This suggests that another way to fix my problem would be this (tested):

Ok, there is a difference in how the BIOS sets bit 28. But this version
of the fix should take care of both cases as it works on my machine too.
You could also add this hunk to your patch:

diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 4681459..353154e 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -89,7 +89,7 @@
 #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* "" Lfence synchronizes RDTSC */
 #define X86_FEATURE_11AP       (3*32+19) /* "" Bad local APIC aka 11AP */
 #define X86_FEATURE_NOPL       (3*32+20) /* The NOPL (0F 1F) instructions */
-#define X86_FEATURE_AMDC1E     (3*32+21) /* AMD C1E detected */
+                                         /* 21 missing, was AMD_C1E workaround */
 #define X86_FEATURE_XTOPOLOGY  (3*32+22) /* cpu topology enum extensions */
 #define X86_FEATURE_TSC_RELIABLE (3*32+23) /* TSC is known to be reliable */
 #define X86_FEATURE_NONSTOP_TSC        (3*32+24) /* TSC does not stop in C states */

so that we get rid of that simulated CPUID flag completely and use
c1e_detected only.

I'll test it on my other AMD boxes to make sure we don't regress on
older machines...

Thanks.

> diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
> index aa2c39d..92091de 100644
> --- a/arch/x86/include/asm/acpi.h
> +++ b/arch/x86/include/asm/acpi.h
> @@ -134,7 +134,7 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
>  	    boot_cpu_data.x86_model <= 0x05 &&
>  	    boot_cpu_data.x86_mask < 0x0A)
>  		return 1;
> -	else if (boot_cpu_has(X86_FEATURE_AMDC1E))
> +	else if (c1e_detected)
>  		return 1;
>  	else
>  		return max_cstate;
> diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
> index 7e5c6a6..336851e 100644
> --- a/arch/x86/include/asm/processor.h
> +++ b/arch/x86/include/asm/processor.h
> @@ -762,6 +762,7 @@ extern void init_c1e_mask(void);
>  extern unsigned long		boot_option_idle_override;
>  extern unsigned long		idle_halt;
>  extern unsigned long		idle_nomwait;
> +extern int			c1e_detected;
>  
>  /*
>   * on systems with caches, caches must be flashed as the absolute
> diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
> index e7e3521..7667977 100644
> --- a/arch/x86/kernel/process.c
> +++ b/arch/x86/kernel/process.c
> @@ -561,8 +561,10 @@ no_c1e_idle:
>  	return 0;
>  }
>  
> +int c1e_detected;
> +EXPORT_SYMBOL(c1e_detected);
> +
>  static cpumask_var_t c1e_mask;
> -static int c1e_detected;
>  
>  void c1e_remove_cpu(int cpu)
>  {
> @@ -589,7 +591,6 @@ static void c1e_idle(void)
>  			if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
>  				mark_tsc_unstable("TSC halt in AMD C1E");
>  			printk(KERN_INFO "System has AMD C1E enabled\n");
> -			set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E);
>  		}
>  	}
>  
> diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
> index b1b3856..7cd95eb 100644
> --- a/drivers/acpi/processor_idle.c
> +++ b/drivers/acpi/processor_idle.c
> @@ -159,7 +159,7 @@ static void lapic_timer_check_state(int state, struct acpi_processor *pr,
>  	if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
>  		return;
>  
> -	if (boot_cpu_has(X86_FEATURE_AMDC1E))
> +	if (c1e_detected)
>  		type = ACPI_STATE_C1;
>  
>  	/*
> 

-- 
Regards/Gruss,
Boris.

Advanced Micro Devices GmbH
Einsteinring 24, 85609 Dornach
General Managers: Alberto Bozzo, Andrew Bowd
Registration: Dornach, Gemeinde Aschheim, Landkreis Muenchen
Registergericht Muenchen, HRB Nr. 43632

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[H. Peter Anvin]

On 07/16/2010 08:39 AM, Borislav Petkov wrote:
> From: "H. Peter Anvin"<hpa@zytor.com>
> Date: Fri, Jul 16, 2010 at 12:25:39AM -0400
>
>> On 07/14/2010 02:31 PM, Michal Schmidt wrote:
>>>
>>> This suggests that another way to fix my problem would be this (tested):
>>>
>>
>> This is a change of semantics from an AND to an OR across CPUs...
>
> You mean the c1e_detected variable and the CPUID flag, right? Well,
> frankly and if I'm not missing anything, we actually only need to track
> when either bits [27,28] get set in that MSR - MSR_K8_INT_PENDING_MSG -
> in order to do timer broadcast.
>
> And strictly speaking, we don't need a variable for that at all (nor a
> synthetic CPUID flag, for that matter) - we can simply read the MSR as
> much as we'd like after we've detected that this CPU supports C1E.
>
> But having the value cached is faster and doesn't enlarge checking
> code in acpi_processor_cstate_check().
>
> I think the reason for adding the syntetic cpuid flag is only to
> communicate to the ACPI processor module that we don't support deeper
> C-states on a C1E machine, see a8d6829044901a67732904be5f1eacdf8539604f.
> So we don't strictly need it and we can only export c1e_detected to the
> rest for simplicity.
>

No, the difference between using a separate variable and the CPU feature 
bit is that CPU feature bit is ANDed across all CPUs, whereas this 
variable is set if it is set on *any* CPU.

	-hpa

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[H. Peter Anvin]

On 07/14/2010 02:31 PM, Michal Schmidt wrote:
> 
> This suggests that another way to fix my problem would be this (tested):
> 

This is a change of semantics from an AND to an OR across CPUs...

	-hpa
-- 
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel.  I don't speak on their behalf.

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Borislav Petkov]

From: "H. Peter Anvin" <hpa@zytor.com>
Date: Fri, Jul 16, 2010 at 12:25:39AM -0400

> On 07/14/2010 02:31 PM, Michal Schmidt wrote:
> > 
> > This suggests that another way to fix my problem would be this (tested):
> > 
> 
> This is a change of semantics from an AND to an OR across CPUs...

You mean the c1e_detected variable and the CPUID flag, right? Well,
frankly and if I'm not missing anything, we actually only need to track
when either bits [27,28] get set in that MSR - MSR_K8_INT_PENDING_MSG -
in order to do timer broadcast.

And strictly speaking, we don't need a variable for that at all (nor a
synthetic CPUID flag, for that matter) - we can simply read the MSR as
much as we'd like after we've detected that this CPU supports C1E.

But having the value cached is faster and doesn't enlarge checking
code in acpi_processor_cstate_check().

I think the reason for adding the syntetic cpuid flag is only to
communicate to the ACPI processor module that we don't support deeper
C-states on a C1E machine, see a8d6829044901a67732904be5f1eacdf8539604f.
So we don't strictly need it and we can only export c1e_detected to the
rest for simplicity.

-- 
Regards/Gruss,
Boris.

Advanced Micro Devices GmbH
Einsteinring 24, 85609 Dornach
General Managers: Alberto Bozzo, Andrew Bowd
Registration: Dornach, Gemeinde Aschheim, Landkreis Muenchen
Registergericht Muenchen, HRB Nr. 43632

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Borislav Petkov]

From: "H. Peter Anvin" <hpa@zytor.com>
Date: Thu, Jul 15, 2010 at 05:56:40PM -0400

> >> This is a change of semantics from an AND to an OR across CPUs...
> >
> > You mean the c1e_detected variable and the CPUID flag, right? Well,
> > frankly and if I'm not missing anything, we actually only need to track
> > when either bits [27,28] get set in that MSR - MSR_K8_INT_PENDING_MSG -
> > in order to do timer broadcast.
> >
> > And strictly speaking, we don't need a variable for that at all (nor a
> > synthetic CPUID flag, for that matter) - we can simply read the MSR as
> > much as we'd like after we've detected that this CPU supports C1E.
> >
> > But having the value cached is faster and doesn't enlarge checking
> > code in acpi_processor_cstate_check().
> >
> > I think the reason for adding the syntetic cpuid flag is only to
> > communicate to the ACPI processor module that we don't support deeper
> > C-states on a C1E machine, see a8d6829044901a67732904be5f1eacdf8539604f.
> > So we don't strictly need it and we can only export c1e_detected to the
> > rest for simplicity.
> >
> 
> No, the difference between using a separate variable and the CPU feature 
> bit is that CPU feature bit is ANDed across all CPUs, whereas this 
> variable is set if it is set on *any* CPU.

... and that's ok because the MSR bits get set on all cores after BIOS
turns on C1E. Let me verify this though.

-- 
Regards/Gruss,
Boris.

Advanced Micro Devices GmbH
Einsteinring 24, 85609 Dornach
General Managers: Alberto Bozzo, Andrew Bowd
Registration: Dornach, Gemeinde Aschheim, Landkreis Muenchen
Registergericht Muenchen, HRB Nr. 43632

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[H. Peter Anvin]

On 07/16/2010 12:22 AM, Borislav Petkov wrote:
>>
>> No, the difference between using a separate variable and the CPU feature 
>> bit is that CPU feature bit is ANDed across all CPUs, whereas this 
>> variable is set if it is set on *any* CPU.
> 
> ... and that's ok because the MSR bits get set on all cores after BIOS
> turns on C1E. Let me verify this though.
> 

Is there any reason for the OR behavior?  Otherwise, it's just plain
wrong...

	-hpa

-- 
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel.  I don't speak on their behalf.

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Borislav Petkov]

From: "H. Peter Anvin" <hpa@zytor.com>
Date: Fri, Jul 16, 2010 at 12:02:32PM -0400

> On 07/16/2010 12:22 AM, Borislav Petkov wrote:
> >>
> >> No, the difference between using a separate variable and the CPU feature 
> >> bit is that CPU feature bit is ANDed across all CPUs, whereas this 
> >> variable is set if it is set on *any* CPU.
> > 
> > ... and that's ok because the MSR bits get set on all cores after BIOS
> > turns on C1E. Let me verify this though.
> > 
> 
> Is there any reason for the OR behavior?  Otherwise, it's just plain
> wrong...

I don't see the need for two things denoting C1E for the very simple
reason: when C1E gets enabled on a machine, one of the bits gets set in
the MSR on each core simultaneously. So if one core sees one of the bits
set, all the remaining cores are seeing them too. The first core that
sees one of the bits in the MSR, sets c1e_detected.

So next time any core does cpu_idle() => c1e_idle(), it switches to
timer broadcast on it since it might go into C1E if all the others
follow.

Frankly, I can't think of a case where we'd need to two things - I
could be missing something. But this workaround is a couple of years
old, maybe Thomas might give us more insight into whether there's a
particular reason for the cpuid flag and the c1e_detected variable.
Thomas?

-- 
Regards/Gruss,
Boris.

Advanced Micro Devices GmbH
Einsteinring 24, 85609 Dornach
General Managers: Alberto Bozzo, Andrew Bowd
Registration: Dornach, Gemeinde Aschheim, Landkreis Muenchen
Registergericht Muenchen, HRB Nr. 43632

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[H. Peter Anvin]

On 07/16/2010 09:25 AM, Borislav Petkov wrote:
> 
> I don't see the need for two things denoting C1E for the very simple
> reason: when C1E gets enabled on a machine, one of the bits gets set in
> the MSR on each core simultaneously. So if one core sees one of the bits
> set, all the remaining cores are seeing them too. The first core that
> sees one of the bits in the MSR, sets c1e_detected.
> 
> So next time any core does cpu_idle() => c1e_idle(), it switches to
> timer broadcast on it since it might go into C1E if all the others
> follow.
> 
> Frankly, I can't think of a case where we'd need to two things - I
> could be missing something. But this workaround is a couple of years
> old, maybe Thomas might give us more insight into whether there's a
> particular reason for the cpuid flag and the c1e_detected variable.
> Thomas?
> 

I'm not saying there should be two things (and that's clearly wrong no
matter what), but rather it's not clear to me that the one thing should
be a variable.

	-hpa

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Borislav Petkov]

From: "H. Peter Anvin" <hpa@zytor.com>
Date: Fri, Jul 16, 2010 at 06:28:33PM -0400

> On 07/16/2010 09:25 AM, Borislav Petkov wrote:
> > 
> > I don't see the need for two things denoting C1E for the very simple
> > reason: when C1E gets enabled on a machine, one of the bits gets set in
> > the MSR on each core simultaneously. So if one core sees one of the bits
> > set, all the remaining cores are seeing them too. The first core that
> > sees one of the bits in the MSR, sets c1e_detected.
> > 
> > So next time any core does cpu_idle() => c1e_idle(), it switches to
> > timer broadcast on it since it might go into C1E if all the others
> > follow.
> > 
> > Frankly, I can't think of a case where we'd need to two things - I
> > could be missing something. But this workaround is a couple of years
> > old, maybe Thomas might give us more insight into whether there's a
> > particular reason for the cpuid flag and the c1e_detected variable.
> > Thomas?
> > 
> 
> I'm not saying there should be two things (and that's clearly wrong no
> matter what), but rather it's not clear to me that the one thing should
> be a variable.

Why not? Once one of the MSR bits is turned on, it stays on until next
reboot. The variable caches that value which will not change and saves
us the rdmsr everytime a cpu goes idle. So I don't see the need to have
a function instead which checks the MSR everytime, for example.

Btw, I think we should wait with whatever fix we come up until the
merge window so that we have more time to fix any fallout then (which I
don't expect but who knows) instead of rushing this now. We can always
backport it then too.

-- 
Regards/Gruss,
Boris.

Advanced Micro Devices GmbH
Einsteinring 24, 85609 Dornach
General Managers: Alberto Bozzo, Andrew Bowd
Registration: Dornach, Gemeinde Aschheim, Landkreis Muenchen
Registergericht Muenchen, HRB Nr. 43632

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Heinz Diehl]

On 15.07.2010, Michal Schmidt wrote: 

> This suggests that another way to fix my problem would be this (tested):
[....]

Did apply this patch to stock 2.6.35-rc5, it does _not_ fix my C1E problem.
It takes a lot of key pressing in the boot process to get the system up,
just as it has been before.

(I'll post my dmesg with your debugging patch applied in another mail.)

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Heinz Diehl]

On 14.07.2010, Michal Schmidt wrote: 

> On my system with AMD Phenom II X6 I am seeing pauses at boot (usually during
> udev startup) which require a key press to continue. It only happens if C1E is
> enabled in the BIOS.

That's exactly what I see. Unfortunately, this patch doesn't fix it for me
either (applied to 2.6.35-rc5).

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Borislav Petkov]

From: Heinz Diehl <htd@fancy-poultry.org>
Date: Sun, Jul 18, 2010 at 12:22:39PM -0400

> On 15.07.2010, Michal Schmidt wrote: 
> 
> > This suggests that another way to fix my problem would be this (tested):
> [....]
> 
> Did apply this patch to stock 2.6.35-rc5, it does _not_ fix my C1E problem.
> It takes a lot of key pressing in the boot process to get the system up,
> just as it has been before.

Well, no wonder it wouldn't work - you seem to have that funny Gigabyte
BIOS which botches lapic and ioapic id enumeration and obviously
enabling C1E in the SMI handler (excerpt from your dmesg):

ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23

See how the IOAPIC's and the third LAPIC's ids are the same?
That's wrong. There are couple people with the same problem:
https://bugzilla.kernel.org/show_bug.cgi?id=15289. And as comment #53
says, we're trying to talk to Gigabyte to fix this and the C1E problem.
For now, you can disable C1E in the BIOS, use "idle=mwait" and put
yourself on the CC list of that bug. Sorry, I wish I could give you
better news.

-- 
Regards/Gruss,
Boris.

Advanced Micro Devices GmbH
Einsteinring 24, 85609 Dornach
General Managers: Alberto Bozzo, Andrew Bowd
Registration: Dornach, Gemeinde Aschheim, Landkreis Muenchen
Registergericht Muenchen, HRB Nr. 43632

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Borislav Petkov]

From: Heinz Diehl <htd@fancy-poultry.org>
Date: Sun, Jul 18, 2010 at 12:22:39PM -0400

> On 15.07.2010, Michal Schmidt wrote: 
> 
> > This suggests that another way to fix my problem would be this (tested):
> [....]
> 
> Did apply this patch to stock 2.6.35-rc5, it does _not_ fix my C1E problem.
> It takes a lot of key pressing in the boot process to get the system up,
> just as it has been before.

Ok, come to think of it, there are a couple of things you could also test:

First of all, there's this HPET readback on ATI chipsets which wasn't in
your testing kernel and it would be a good thing to test it - I'm little
sceptical but it fixes the same symptoms for another user so it wouldn't
hurt. You'll have to apply the following patches:

1. The latest fix from Michal (adding it here for completeness):

--
>From 8edc23442afd629e71b17789fdf2a4b657c29e37 Mon Sep 17 00:00:00 2001
From: Michal Schmidt <mschmidt@redhat.com>
Date: Wed, 14 Jul 2010 17:31:02 -0400
Subject: [PATCH] x86: fix keeping track of AMD C1E

On Wed, 14 Jul 2010 23:22:01 +0200 Michal Schmidt wrote:
> identify_cpu: before ANDing, c1e_detected: 0, boot_cpu_has(C1E): 0
> identify_cpu:  after ANDing, c1e_detected: 0, boot_cpu_has(C1E): 0
> c1e_idle: cpu: 1, bits 0x10000000, c1e_detected: 0,
> boot_cpu_has(C1E): 0 lockdep: fixing up alternatives.
>  #2
> System has AMD C1E enabled
> Switch to broadcast mode on CPU1
> identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 1
> identify_cpu:  after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
> Switch to broadcast mode on CPU2
> lockdep: fixing up alternatives.
>  #3
> identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
> identify_cpu:  after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
> Switch to broadcast mode on CPU3
> lockdep: fixing up alternatives.
>  #4
> identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
> identify_cpu:  after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
> Switch to broadcast mode on CPU4
> lockdep: fixing up alternatives.
>  #5 Ok.
> identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
> identify_cpu:  after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
> Brought up 6 CPUs
> Switch to broadcast mode on CPU5
> Total of 6 processors activated (38528.67 BogoMIPS).
> Switch to broadcast mode on CPU0

This suggests that another way to fix my problem would be this (tested):
---
 arch/x86/include/asm/acpi.h       |    8 ++++++--
 arch/x86/include/asm/cpufeature.h |    2 +-
 arch/x86/include/asm/processor.h  |    1 +
 arch/x86/kernel/process.c         |   12 ++++++++++--
 drivers/acpi/processor_idle.c     |    2 +-
 5 files changed, 19 insertions(+), 6 deletions(-)

diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index aa2c39d..7583f19 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -134,10 +134,14 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
 	    boot_cpu_data.x86_model <= 0x05 &&
 	    boot_cpu_data.x86_mask < 0x0A)
 		return 1;
-	else if (boot_cpu_has(X86_FEATURE_AMDC1E))
+	else if (c1e_detected) {
+		pr_err("%s: C1E\n", __func__);
 		return 1;
-	else
+	}
+	else {
+		pr_err("%s: max_cstate: %d\n", __func__, max_cstate);
 		return max_cstate;
+	}
 }
 
 static inline bool arch_has_acpi_pdc(void)
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 4681459..353154e 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -89,7 +89,7 @@
 #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* "" Lfence synchronizes RDTSC */
 #define X86_FEATURE_11AP	(3*32+19) /* "" Bad local APIC aka 11AP */
 #define X86_FEATURE_NOPL	(3*32+20) /* The NOPL (0F 1F) instructions */
-#define X86_FEATURE_AMDC1E	(3*32+21) /* AMD C1E detected */
+					  /* 21 missing, was AMD_C1E workaround */
 #define X86_FEATURE_XTOPOLOGY	(3*32+22) /* cpu topology enum extensions */
 #define X86_FEATURE_TSC_RELIABLE (3*32+23) /* TSC is known to be reliable */
 #define X86_FEATURE_NONSTOP_TSC	(3*32+24) /* TSC does not stop in C states */
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 7e5c6a6..336851e 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -762,6 +762,7 @@ extern void init_c1e_mask(void);
 extern unsigned long		boot_option_idle_override;
 extern unsigned long		idle_halt;
 extern unsigned long		idle_nomwait;
+extern int			c1e_detected;
 
 /*
  * on systems with caches, caches must be flashed as the absolute
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index e7e3521..0c2d4df 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -561,8 +561,10 @@ no_c1e_idle:
 	return 0;
 }
 
+int c1e_detected;
+EXPORT_SYMBOL(c1e_detected);
+
 static cpumask_var_t c1e_mask;
-static int c1e_detected;
 
 void c1e_remove_cpu(int cpu)
 {
@@ -584,12 +586,18 @@ static void c1e_idle(void)
 		u32 lo, hi;
 
 		rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
+
+		pr_err("%s: bits 0x%08x\n",
+			__func__, lo & K8_INTP_C1E_ACTIVE_MASK);
+
+		pr_err("%s: cpu: %d, c1e_detected: %d\n",
+			__func__, raw_smp_processor_id(), c1e_detected);
+
 		if (lo & K8_INTP_C1E_ACTIVE_MASK) {
 			c1e_detected = 1;
 			if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
 				mark_tsc_unstable("TSC halt in AMD C1E");
 			printk(KERN_INFO "System has AMD C1E enabled\n");
-			set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E);
 		}
 	}
 
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index b1b3856..7cd95eb 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -159,7 +159,7 @@ static void lapic_timer_check_state(int state, struct acpi_processor *pr,
 	if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
 		return;
 
-	if (boot_cpu_has(X86_FEATURE_AMDC1E))
+	if (c1e_detected)
 		type = ACPI_STATE_C1;
 
 	/*
-- 

and

2. the patch at http://git.kernel.org/tip/08be97962bf338161325d4901642f956ce8c1adb

Please boot this on your machine and send me the whole dmesg, as usual.

Now, if it still shows hickups, we'd like to rule out that there's some
funny HPET IRQ routing issue so please rerun the same test with the same
2 patches ontop but also with "nolapic_timer hpet=verbose" on the kernel
command line. As above, catch the whole dmesg and send it to me.

Thanks.

-- 
Regards/Gruss,
Boris.

Advanced Micro Devices GmbH
Einsteinring 24, 85609 Dornach
General Managers: Alberto Bozzo, Andrew Bowd
Registration: Dornach, Gemeinde Aschheim, Landkreis Muenchen
Registergericht Muenchen, HRB Nr. 43632

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Heinz Diehl]

[-- Attachment #1: Type: text/plain, Size: 957 bytes --]

On 19.07.2010, Borislav Petkov wrote: 

[Patches]
> Please boot this on your machine and send me the whole dmesg, as usual.

Appying these 2 patches to 2.6.35-rc5 didn't help, the machine is stalling
as usual and several key presses are required to get it to boot.

> Now, if it still shows hickups, we'd like to rule out that there's some
> funny HPET IRQ routing issue so please rerun the same test with the same
> 2 patches ontop but also with "nolapic_timer hpet=verbose" on the kernel
> command line.

Did it, and now it boots fine without any delay/stalling.
Did also try stock/vanilla 2.6.35-rc5 with "nolapic_timer hpet=verbose",
and it does boot fine, too.

> As above, catch the whole dmesg and send it to me.

Attached are three files,

dmesg-01 = output of 2.6.35-rc5 + the two patches
dmesg-02 = output of 2.6.35-rc5 + the two patches + "nolapic_timer
 hpet=verbose"
dmesg-03 = vanilla 2.6.35-rc5 + "nolapic_timer hpet=verbose"

Thanks,
Heinz.

[-- Attachment #2: dmesg-01.txt.bz2 --]
[-- Type: application/octet-stream, Size: 11685 bytes --]

[-- Attachment #3: dmesg-02.txt.bz2 --]
[-- Type: application/octet-stream, Size: 12114 bytes --]

[-- Attachment #4: dmesg-03.txt.bz2 --]
[-- Type: application/octet-stream, Size: 12057 bytes --]

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Borislav Petkov]

From: Borislav Petkov <borislav.petkov@amd.com>
Date: Sat, Jul 17, 2010 at 06:21:08AM -0400

> Btw, I think we should wait with whatever fix we come up until the
> merge window so that we have more time to fix any fallout then (which I
> don't expect but who knows) instead of rushing this now. We can always
> backport it then too.

Ok, I think we should go ahead and queue this up for .36 for now, let
it see some linux-next time and such. The other issue with the Gigabyte
boards is still ongoing and, as it looks so far, unrelated.

Michal, scream if you have objections to the patch:

--
From: Michal Schmidt <mschmidt@redhat.com>
Date: Wed, 14 Jul 2010 17:31:02 -0400
Subject: [PATCH] x86: fix keeping track of AMD C1E

Accomodate the original C1E-aware idle routine to the different points
during boot when the BIOS enables C1E. While at it, remove the synthetic
CPUID flag in favor of a single global setting which denotes C1E status
on the system.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 arch/x86/include/asm/acpi.h       |    2 +-
 arch/x86/include/asm/cpufeature.h |    2 +-
 arch/x86/include/asm/processor.h  |    1 +
 arch/x86/kernel/process.c         |    6 ++++--
 drivers/acpi/processor_idle.c     |    2 +-
 5 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index aa2c39d..92091de 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -134,7 +134,7 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
 	    boot_cpu_data.x86_model <= 0x05 &&
 	    boot_cpu_data.x86_mask < 0x0A)
 		return 1;
-	else if (boot_cpu_has(X86_FEATURE_AMDC1E))
+	else if (c1e_detected)
 		return 1;
 	else
 		return max_cstate;
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 4681459..353154e 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -89,7 +89,7 @@
 #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* "" Lfence synchronizes RDTSC */
 #define X86_FEATURE_11AP	(3*32+19) /* "" Bad local APIC aka 11AP */
 #define X86_FEATURE_NOPL	(3*32+20) /* The NOPL (0F 1F) instructions */
-#define X86_FEATURE_AMDC1E	(3*32+21) /* AMD C1E detected */
+					  /* 21 missing, was AMD_C1E workaround */
 #define X86_FEATURE_XTOPOLOGY	(3*32+22) /* cpu topology enum extensions */
 #define X86_FEATURE_TSC_RELIABLE (3*32+23) /* TSC is known to be reliable */
 #define X86_FEATURE_NONSTOP_TSC	(3*32+24) /* TSC does not stop in C states */
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 7e5c6a6..336851e 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -762,6 +762,7 @@ extern void init_c1e_mask(void);
 extern unsigned long		boot_option_idle_override;
 extern unsigned long		idle_halt;
 extern unsigned long		idle_nomwait;
+extern int			c1e_detected;
 
 /*
  * on systems with caches, caches must be flashed as the absolute
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index e7e3521..1b44a5c 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -561,8 +561,10 @@ no_c1e_idle:
 	return 0;
 }
 
+int c1e_detected;
+EXPORT_SYMBOL(c1e_detected);
+
 static cpumask_var_t c1e_mask;
-static int c1e_detected;
 
 void c1e_remove_cpu(int cpu)
 {
@@ -584,12 +586,12 @@ static void c1e_idle(void)
 		u32 lo, hi;
 
 		rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
+
 		if (lo & K8_INTP_C1E_ACTIVE_MASK) {
 			c1e_detected = 1;
 			if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
 				mark_tsc_unstable("TSC halt in AMD C1E");
 			printk(KERN_INFO "System has AMD C1E enabled\n");
-			set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E);
 		}
 	}
 
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index b1b3856..7cd95eb 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -159,7 +159,7 @@ static void lapic_timer_check_state(int state, struct acpi_processor *pr,
 	if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
 		return;
 
-	if (boot_cpu_has(X86_FEATURE_AMDC1E))
+	if (c1e_detected)
 		type = ACPI_STATE_C1;
 
 	/*
-- 
1.7.1


-- 
Regards/Gruss,
Boris.

Advanced Micro Devices GmbH
Einsteinring 24, 85609 Dornach
General Managers: Alberto Bozzo, Andrew Bowd
Registration: Dornach, Gemeinde Aschheim, Landkreis Muenchen
Registergericht Muenchen, HRB Nr. 43632

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Andreas Herrmann]

On Tue, Jul 20, 2010 at 05:14:05PM +0200, Heinz Diehl wrote:
> On 19.07.2010, Borislav Petkov wrote: 
> 
> [Patches]
> > Please boot this on your machine and send me the whole dmesg, as usual.
> 
> Appying these 2 patches to 2.6.35-rc5 didn't help, the machine is stalling
> as usual and several key presses are required to get it to boot.

Can you please boot using acpi_skip_timer_override kernel parameter?
I recently had a chance to test on another Gigabyte mainbaord which
showed similar symptoms as your system. I did not find suspicious
things in HPET or APIC configuration but this kernel option worked
around the problem.

See also https://bugzilla.kernel.org/show_bug.cgi?id=15289


Thanks,

Andreas

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Heinz Diehl]

On 09.09.2010, Andreas Herrmann wrote: 

> Can you please boot using acpi_skip_timer_override kernel parameter?
> I recently had a chance to test on another Gigabyte mainbaord which
> showed similar symptoms as your system. I did not find suspicious
> things in HPET or APIC configuration but this kernel option worked
> around the problem.

Yeah!

This works around the problem on my system, too! Now it boots 
quite normally, with C1E enabled.

Thanks,
Heinz.

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Heinz Diehl]

[-- Attachment #1: Type: text/plain, Size: 2191 bytes --]

On 14.07.2010, Michal Schmidt wrote: 

> I found another person reporting the same symptoms on
> GIGABYTE GA-MA770T-UD3P AthlonXII 620 (4 cores) kernel 2.6.33.5 (Mandriva)
> (http://www.abclinuxu.cz/poradna/hardware/show/308799, in Czech)

Here's the relevant part of my dmesg, kernel 2.6.35-rc5 with your
debbuging patch applied (just the debbuging patch, no other fix/patch in
this thread). The full dmesg output is attached.

[....]
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
tseg: 00cfe00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
identify_cpu: before ANDing, c1e_detected: 0, boot_cpu_has(C1E): 0
identify_cpu:  after ANDing, c1e_detected: 0, boot_cpu_has(C1E): 0
mce: CPU supports 6 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
ACPI: Core revision 20100428
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 905e Processor stepping 02
c1e_idle: cpu: 0, bits 0x08000000, c1e_detected: 0, boot_cpu_has(C1E): 0
System has AMD C1E enabled
Switch to broadcast mode on CPU0
Booting Node   0, Processors  #1
identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 1
identify_cpu:  after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
Switch to broadcast mode on CPU1
 #2
 identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
 identify_cpu:  after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
 Switch to broadcast mode on CPU2
  #3
 identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
 identify_cpu:  after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
 Brought up 4 CPUs
 Total of 4 processors activated (20092.25 BogoMIPS).
 Switch to broadcast mode on CPU3
 NET: Registered protocol family 16
 node 0 link 0: io port [c000, ffff]
 TOM: 00000000d0000000 aka 3328M


[-- Attachment #2: dmesg01.txt --]
[-- Type: text/plain, Size: 42648 bytes --]

Linux version 2.6.35-rc5-c1e_debug (root@liesel) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP PREEMPT Sun Jul 18 17:50:33 CEST 2010
Command line: root=/dev/mapper/root luks_root=/dev/sda3 luks="root" resume=/dev/mapper/swap splash=silent vga=0x31a clocksource=hpet pci=use_crs
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 0000000000098400 (usable)
 BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cfd81000 (usable)
 BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS)
 BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data)
 BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 base 0000CFE00000 mask FFFFFFE00000 uncachable
  4 base 000100000000 mask FFFF00000000 write-back
  5 base 000200000000 mask FFFFE0000000 write-back
  6 base 000220000000 mask FFFFF0000000 write-back
  7 disabled
TOM2: 0000000230000000 aka 8960M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfd81 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cfd81000
 0000000000 - 00c0000000 page 1G
 00c0000000 - 00cfc00000 page 2M
 00cfc00000 - 00cfd81000 page 4k
kernel direct mapping tables up to cfd81000 @ 8000-b000
init_memory_mapping: 0000000100000000-0000000230000000
 0100000000 - 0200000000 page 1G
 0200000000 - 0230000000 page 2M
kernel direct mapping tables up to 230000000 @ a000-c000
RAMDISK: 37a0c000 - 37ff0000
ACPI: RSDP 00000000000f6ed0 00014 (v00 GBT   )
ACPI: RSDT 00000000cfde3000 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfde3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfde30c0 06D75 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfde0000 00040
ACPI: SSDT 00000000cfde9f00 0088C (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
ACPI: HPET 00000000cfdea7c0 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfdea800 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 00000000cfde9e40 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000230000000
Initmem setup node 0 0000000000000000-0000000230000000
  NODE_DATA [0000000100000000 - 0000000100026fff]
 [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880100200000-ffff8801073fffff] on node 0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00230000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000001 -> 0x00000098
    0: 0x00000100 -> 0x000cfd81
    0: 0x00100000 -> 0x00230000
On node 0 totalpages: 2096408
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3935 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 832953 pages, LIFO batch:31
  Normal zone: 17024 pages used for memmap
  Normal zone: 1228160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [7000 - 77ff]
PM: Registered nosave memory: 0000000000098000 - 0000000000099000
PM: Registered nosave memory: 0000000000099000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfd81000 - 00000000cfde0000
PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000
PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000
PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000
PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
setup_percpu: NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff880006000000 s81536 r8192 d20864 u262144
pcpu-alloc: s81536 r8192 d20864 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2065048
Policy zone: Normal
Kernel command line: root=/dev/mapper/root luks_root=/dev/sda3 luks="root" resume=/dev/mapper/swap splash=silent vga=0x31a clocksource=hpet pci=use_crs
early_res array is doubled to 128 at [b000 - bfff]
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 20000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Subtract (63 early reservations)
  #1 [0001000000 - 0005e2db04]   TEXT DATA BSS
  #2 [0037a0c000 - 0037ff0000]         RAMDISK
  #3 [0000098400 - 0000100000]   BIOS reserved
  #4 [0005e2e000 - 0005e2e0fe]             BRK
  #5 [0000001000 - 0000003000]      TRAMPOLINE
  #6 [0000003000 - 0000007000]     ACPI WAKEUP
  #7 [0000008000 - 000000a000]         PGTABLE
  #8 [000000a000 - 000000b000]         PGTABLE
  #9 [0100000000 - 0100027000]       NODE_DATA
  #10 [0005e2e100 - 0005e2f100]         BOOTMEM
  #11 [000622f100 - 000622f700]         BOOTMEM
  #12 [0100027000 - 0100028000]         BOOTMEM
  #13 [0100028000 - 0100029000]         BOOTMEM
  #14 [0100200000 - 0107400000]        MEMMAP 0
  #15 [0005e2db40 - 0005e2dcc0]         BOOTMEM
  #16 [0005e2f100 - 0005e47100]         BOOTMEM
  #17 [0005e47100 - 0005e5f100]         BOOTMEM
  #18 [0005e60000 - 0005e61000]         BOOTMEM
  #19 [0005e2dcc0 - 0005e2dd01]         BOOTMEM
  #20 [0005e2dd40 - 0005e2dd83]         BOOTMEM
  #21 [0005e5f100 - 0005e5f368]         BOOTMEM
  #22 [0005e2ddc0 - 0005e2de28]         BOOTMEM
  #23 [0005e2de40 - 0005e2dea8]         BOOTMEM
  #24 [0005e2dec0 - 0005e2df28]         BOOTMEM
  #25 [0005e2df40 - 0005e2dfa8]         BOOTMEM
  #26 [0005e5f380 - 0005e5f3e8]         BOOTMEM
  #27 [0005e5f400 - 0005e5f468]         BOOTMEM
  #28 [0005e5f480 - 0005e5f4e8]         BOOTMEM
  #29 [0005e5f500 - 0005e5f568]         BOOTMEM
  #30 [0005e5f580 - 0005e5f5e8]         BOOTMEM
  #31 [0005e5f600 - 0005e5f668]         BOOTMEM
  #32 [0005e2dfc0 - 0005e2dfe0]         BOOTMEM
  #33 [0005e5f680 - 0005e5f6a0]         BOOTMEM
  #34 [0005e5f6c0 - 0005e5f743]         BOOTMEM
  #35 [0005e5f780 - 0005e5f803]         BOOTMEM
  #36 [0006000000 - 000601b000]         BOOTMEM
  #37 [0006040000 - 000605b000]         BOOTMEM
  #38 [0006080000 - 000609b000]         BOOTMEM
  #39 [00060c0000 - 00060db000]         BOOTMEM
  #40 [0006100000 - 000611b000]         BOOTMEM
  #41 [0006140000 - 000615b000]         BOOTMEM
  #42 [0006180000 - 000619b000]         BOOTMEM
  #43 [00061c0000 - 00061db000]         BOOTMEM
  #44 [0005e5f840 - 0005e5f848]         BOOTMEM
  #45 [0005e5f880 - 0005e5f888]         BOOTMEM
  #46 [0005e5f8c0 - 0005e5f8e0]         BOOTMEM
  #47 [0005e5f900 - 0005e5f940]         BOOTMEM
  #48 [0005e5f940 - 0005e5fa60]         BOOTMEM
  #49 [0005e5fa80 - 0005e5fac8]         BOOTMEM
  #50 [0005e5fb00 - 0005e5fb48]         BOOTMEM
  #51 [0005e5fb80 - 0005e5fd80]         BOOTMEM
  #52 [0005e5fd80 - 0005e5ff80]         BOOTMEM
  #53 [0005e61000 - 0005e61200]         BOOTMEM
  #54 [0005e61200 - 0005e61400]         BOOTMEM
  #55 [0005e61400 - 0005e61600]         BOOTMEM
  #56 [0005e61600 - 0005e69600]         BOOTMEM
  #57 [0020000000 - 0024000000]         BOOTMEM
  #58 [0005e5ff80 - 0005e5ffa0]         BOOTMEM
  #59 [0006230000 - 000a230000]         BOOTMEM
  #60 [0005e69600 - 0005e89600]         BOOTMEM
  #61 [0005e89600 - 0005ec9600]         BOOTMEM
  #62 [000000c000 - 0000014000]         BOOTMEM
Memory: 8050012k/9175040k available (4358k kernel code, 789408k absent, 335620k reserved, 3155k data, 1816k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptable hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:4352
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2511.864 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5023.72 BogoMIPS (lpj=2511861)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
tseg: 00cfe00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
identify_cpu: before ANDing, c1e_detected: 0, boot_cpu_has(C1E): 0
identify_cpu:  after ANDing, c1e_detected: 0, boot_cpu_has(C1E): 0
mce: CPU supports 6 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
ACPI: Core revision 20100428
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 905e Processor stepping 02
c1e_idle: cpu: 0, bits 0x08000000, c1e_detected: 0, boot_cpu_has(C1E): 0
System has AMD C1E enabled
Switch to broadcast mode on CPU0
Booting Node   0, Processors  #1
identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 1
identify_cpu:  after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
Switch to broadcast mode on CPU1
 #2
identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
identify_cpu:  after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
Switch to broadcast mode on CPU2
 #3
identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
identify_cpu:  after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
Brought up 4 CPUs
Total of 4 processors activated (20092.25 BogoMIPS).
Switch to broadcast mode on CPU3
NET: Registered protocol family 16
node 0 link 0: io port [c000, ffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [e0000000, e00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
TOM2: 0000000230000000 aka 8960M
bus: [00, 03] on node 0 link 0
bus: 00 index 0 [io  0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
bus: 00 index 3 [mem 0xe0400000-0xffffffff]
bus: 00 index 4 [mem 0xe0100000-0xe03fffff]
bus: 00 index 5 [mem 0x230000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff]
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io  0xfa00-0xfa0f]
pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit]
pci 0000:01:00.0: reg 24: [io  0xef00-0xef7f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfa000000-0xfcffffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 10: [io  0xde00-0xdeff]
pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:0a.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
reserve RAM buffer: 0000000000098400 - 000000000009ffff 
reserve RAM buffer: 00000000cfd81000 - 00000000cfffffff 
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
pnp 00:0c: disabling [mem 0x000d4400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x00100000-0xcfddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0220-0x0225] has been reserved
system 00:01: [io  0x0290-0x0294] has been reserved
system 00:02: [io  0x4100-0x411f] has been reserved
system 00:02: [io  0x0228-0x022f] has been reserved
system 00:02: [io  0x0238-0x023f] has been reserved
system 00:02: [io  0x040b] has been reserved
system 00:02: [io  0x04d6] has been reserved
system 00:02: [io  0x0c00-0x0c01] has been reserved
system 00:02: [io  0x0c14] has been reserved
system 00:02: [io  0x0c50-0x0c52] has been reserved
system 00:02: [io  0x0c6c-0x0c6d] has been reserved
system 00:02: [io  0x0c6f] has been reserved
system 00:02: [io  0x0cd0-0x0cd1] has been reserved
system 00:02: [io  0x0cd2-0x0cd3] has been reserved
system 00:02: [io  0x0cd4-0x0cdf] has been reserved
system 00:02: [io  0x4000-0x40fe] has been reserved
system 00:02: [io  0x4210-0x4217] has been reserved
system 00:02: [io  0x0b00-0x0b0f] has been reserved
system 00:02: [io  0x0b10-0x0b1f] has been reserved
system 00:02: [io  0x0b20-0x0b3f] has been reserved
system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: [mem 0xcfde0000-0xcfdeffff] could not be reserved
system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0c: [mem 0xcfdf0000-0xcfdfffff] has been reserved
system 00:0c: [mem 0xcfe00000-0xcfefffff] could not be reserved
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfa000000-0xfcffffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:0a.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03-03]
pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:0a.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xcff00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 6032k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1279476208.487:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Btrfs loaded
msgmni has been set to 15863
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0a.0: setting latency timer to 64
pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 5120k, total 262144k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
MM: desc_per_page = 128
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
Netfilter messages via NETLINK v0.30.
CCID: Activated CCID 2 (TCP-like)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
registered taskstats version 1
Freeing unused kernel memory: 1816k freed
ACPI: acpi_idle registered with cpuidle
acpi_processor_cstate_check: enter
acpi_processor_cstate_check: max_cstate: 8
SCSI subsystem initialized
libata version 3.00 loaded.
Uniform Multi-Platform E-IDE driver
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
fuse init (API version 7.14)
loop: module loaded
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
udevd version 128 started
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
CE: hpet increased min_delta_ns to 7500 nsec
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.35-rc5-c1e_debug ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.35-rc5-c1e_debug ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
usb 1-1: new high speed USB device using ehci_hcd and address 2
ata5: softreset failed (device not ready)
ata3: softreset failed (device not ready)
ata8: softreset failed (device not ready)
ata3: applying SB600 PMP SRST workaround and retrying
ata8: applying SB600 PMP SRST workaround and retrying
ata5: applying SB600 PMP SRST workaround and retrying
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: HPA detected: current 976771055, native 976773168
usb 1-1: New USB device found, idVendor=07d1, idProduct=3c03
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: 802.11 bg WLAN
usb 1-1: Manufacturer: Ralink
ata3.00: HPA detected: current 976771055, native 976773168
ata3.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
ata3.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
ata8.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata8.00: configured for UDMA/133
ata5.00: ATA-8: OCZ SOLID_SSD, 02.10104, max UDMA/100
ata5.00: 62586880 sectors, multi 0: LBA 
ata5.00: configured for UDMA/100
ata4: softreset failed (device not ready)
ata4: applying SB600 PMP SRST workaround and retrying
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB00, max UDMA/100
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223F  SB00 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access     ATA      OCZ SOLID_SSD    02.1 PQ: 0 ANSI: 5
scsi 7:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sd 2:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdb] 62586880 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdc] 976771055 512-byte logical blocks: (500 GB/465 GiB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb:
 sdc:
 sda: sdb1
 sda1 sda2 sda3 sda4
ohci_hcd 0000:00:12.0: OHCI Host Controller
 sdc1
sd 4:0:0:0: [sdb] Attached SCSI disk
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
sd 7:0:0:0: [sdc] Attached SCSI disk
sd 2:0:0:0: [sda] Attached SCSI disk
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.35-rc5-c1e_debug ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.35-rc5-c1e_debug ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.35-rc5-c1e_debug ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.35-rc5-c1e_debug ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.35-rc5-c1e_debug ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 3-2: new full speed USB device using ohci_hcd and address 2
usb 3-2: New USB device found, idVendor=04a9, idProduct=220d
usb 3-2: New USB device strings: Mfr=64, Product=77, SerialNumber=0
usb 3-2: Product: CanoScan
usb 3-2: Manufacturer: Canon
usb 4-2: new low speed USB device using ohci_hcd and address 2
usb 4-2: New USB device found, idVendor=051d, idProduct=0002
usb 4-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 4-2: Product: Back-UPS ES 700 FW:829.D2 .I USB FW:D2 
usb 4-2: Manufacturer: APC
usb 4-2: SerialNumber: 5B0825T20337  
usbcore: registered new interface driver hiddev
usb 4-3: new full speed USB device using ohci_hcd and address 3
generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 700 FW:829.D2 .I USB FW:D2 ] on usb-0000:00:12.1-2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 4-3: New USB device found, idVendor=046d, idProduct=c52b
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: Product: USB Receiver
usb 4-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input1
generic-usb 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.1-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.1/input/input2
generic-usb 0003:046D:C52B.0003: input,hiddev97,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.1-3/input1
generic-usb 0003:046D:C52B.0004: hiddev98,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.1-3/input2
alg: No test for xts(twofish) (xts(twofish-asm))
XFS mounting filesystem dm-0
Ending clean XFS mount for filesystem: dm-0
udevd version 128 started
k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
sd 2:0:0:0: Attached scsi generic sg0 type 0
scsi 3:0:0:0: Attached scsi generic sg1 type 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: Attached scsi generic sg3 type 0
input: PC Speaker as /devices/platform/pcspkr/input/input3
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SOR1 [mem 0x00000b00-0x00000b0f 64bit pref window]
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA for country: EU
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ppdev: user-space parallel port driver
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 42 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90011ede000, 00:1f:d0:be:4c:a5, XID 1c4000c0 IRQ 42
Error: Driver 'pcspkr' is already registered, aborting...
udev: renamed network interface eth0 to eth1
sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
phy0 -> rt73usb_validate_eeprom: EEPROM recovery - NIC: 0xffef
phy0 -> rt73usb_validate_eeprom: EEPROM recovery - Led: 0xe000
phy0 -> rt73usb_validate_eeprom: EEPROM recovery - RSSI OFFSET A: 0x0000
phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a.
phy0: Selected rate control algorithm 'minstrel'
Registered led device: rt73usb-phy0::radio
Registered led device: rt73usb-phy0::assoc
Registered led device: rt73usb-phy0::quality
usbcore: registered new interface driver rt73usb
ALSA sound/pci/hda/patch_realtek.c:1308: SKU: Nid=0x0 sku_cfg=0x0000e601
ALSA sound/pci/hda/patch_realtek.c:1310: SKU: port_connectivity=0x0
ALSA sound/pci/hda/patch_realtek.c:1311: SKU: enable_pcbeep=0x1
ALSA sound/pci/hda/patch_realtek.c:1312: SKU: check_sum=0x00000000
ALSA sound/pci/hda/patch_realtek.c:1313: SKU: customization=0x00000000
ALSA sound/pci/hda/patch_realtek.c:1314: SKU: external_amp=0x0
ALSA sound/pci/hda/patch_realtek.c:1315: SKU: platform_type=0x0
ALSA sound/pci/hda/patch_realtek.c:1316: SKU: swap=0x0
ALSA sound/pci/hda/patch_realtek.c:1317: SKU: override=0x1
hda_codec: ALC888: BIOS auto-probing.
ALSA sound/pci/hda/hda_codec.c:4435: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:4439:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4443:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4444:    mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:4447:    dig-out=0x1e/0x0
ALSA sound/pci/hda/hda_codec.c:4455:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x1c, aux=0x0
ALSA sound/pci/hda/hda_codec.c:4457:    dig-in=0x1f
ALSA sound/pci/hda/patch_realtek.c:1374: realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888
uhci_hcd: USB Universal Host Controller Interface driver
device-mapper: ioctl: unable to remove open device temporary-cryptsetup-3233
XFS mounting filesystem dm-2
Ending clean XFS mount for filesystem: dm-2
XFS mounting filesystem dm-3
Ending clean XFS mount for filesystem: dm-3
XFS mounting filesystem dm-4
Ending clean XFS mount for filesystem: dm-4
Adding 8383904k swap on /dev/mapper/swap.  Priority:-1 extents:1 across:8383904k 
TCP vegas registered
ip_tables: (C) 2000-2006 Netfilter Core Team
ata5.00: configured for UDMA/100
ata5: EH complete
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
powernow-k8: Found 1 AMD Phenom(tm) II X4 905e Processor (4 cpu cores) (version 2.20.00)
powernow-k8:    0 : pstate 0 (2500 MHz)
powernow-k8:    1 : pstate 1 (1900 MHz)
powernow-k8:    2 : pstate 2 (1400 MHz)
powernow-k8:    3 : pstate 3 (800 MHz)
it87: Found IT8720F chip at 0x228, revision 5
it87: Routing internal VCCH to in7
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
it87: Beeping is supported
phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'.
phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
NET: Registered protocol family 17
wlan0: deauthenticating from 00:1d:7e:c6:f3:21 by local choice (reason=3)
wlan0: authenticate with 00:1d:7e:c6:f3:21 (try 1)
wlan0: authenticated
wlan0: associate with 00:1d:7e:c6:f3:21 (try 1)
wlan0: RX AssocResp from 00:1d:7e:c6:f3:21 (capab=0x411 status=0 aid=1)
wlan0: associated
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Heinz Diehl]

On 14.07.2010, Michal Schmidt wrote: 

> The chipset is 890FX. Motherboard Asus M4A89TD PRO/USB3.
> BIOS is the latest version: 0901 (05/17/2010 according to dmidecode)
 
 > I found another person reporting the same symptoms on
 > GIGABYTE GA-MA770T-UD3P AthlonXII 620 (4 cores) kernel 2.6.33.5
(Mandriva)
> (http://www.abclinuxu.cz/poradna/hardware/show/308799, in Czech)

I have exactly the same problem on my system.
Gigabyte GA-MA770-UD3 (Rev. 1.0), latest BIOS F9g, Phenom II X4 905e.

Will try your patch and report back.

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[john stultz]

On Tue, Jul 13, 2010 at 2:01 PM, Michal Schmidt <mschmidt@redhat.com> wrote:
> ----- "Borislav Petkov" <borislav.petkov@amd.com> wrote:
>> ... and this is strange, I didn't experience anything like that on
>> our X6 boxes here couple of months ago. But maybe something got changed
>> in later kernels to trigger that behavior. Michal, what chipset is that
>> and do you have the latest BIOS on it?
>
> The chipset is 890FX. Motherboard Asus M4A89TD PRO/USB3.
> BIOS is the latest version: 0901 (05/17/2010 according to dmidecode)
>
> I found another person reporting the same symptoms on
> GIGABYTE GA-MA770T-UD3P AthlonXII 620 (4 cores) kernel 2.6.33.5 (Mandriva)
> (http://www.abclinuxu.cz/poradna/hardware/show/308799, in Czech)

This also sounds like: https://bugzilla.kernel.org/show_bug.cgi?id=15289

thanks
-john

Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

[Michal Schmidt]

----- "Borislav Petkov" <borislav.petkov@amd.com> wrote:
> ... and this is strange, I didn't experience anything like that on
> our X6 boxes here couple of months ago. But maybe something got changed
> in later kernels to trigger that behavior. Michal, what chipset is that
> and do you have the latest BIOS on it?

The chipset is 890FX. Motherboard Asus M4A89TD PRO/USB3.
BIOS is the latest version: 0901 (05/17/2010 according to dmidecode)

I found another person reporting the same symptoms on
GIGABYTE GA-MA770T-UD3P AthlonXII 620 (4 cores) kernel 2.6.33.5 (Mandriva)
(http://www.abclinuxu.cz/poradna/hardware/show/308799, in Czech)

Michal