* [U-Boot] [PULL] u-boot-arm.git
@ 2010-09-09 19:24 Wolfgang Denk
0 siblings, 0 replies; only message in thread
From: Wolfgang Denk @ 2010-09-09 19:24 UTC (permalink / raw)
To: u-boot
The following changes since commit f91506e28387fece392b5dd3bb3aa309e4ce7e4d:
Merge branch 'master' of /home/wd/git/u-boot/master (2010-09-07 22:19:49 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Albert Aribaud (2):
Orion5x: bugfix: window size (mis)calculation
orion5x: fix comment-in-comment typo in cpu.h
Alexander Stein (1):
at91_pit: Fix AT91_PIT_MR_PIV_MASK macro
Daniel Gorsulowski (3):
at91: Defined main clock frequency on esd at91 boards
at91: Update meesc board to new SoC access
at91: Enabeling USB host on meesc board
Eric B??nard (2):
cpuat91: convert to new at91 soc architecture
cpuat91: update defaut environement
Haavard Skinnemoen (3):
avr32: Print unrelocated PC on exception
avr32: Use uncached() macro to get an address for SDRAM init
avr32: Add simple paging support
Jens Scharsig (1):
AT91 Fix: return value of get_tbclk
Mans Rullgard (3):
ARMV7: OMAP3: Fix and clean up L2 cache enable/disable functions
ARMV7: OMAP3: Convert setup_auxcr() to pure asm
ARMV7: OMAP3: Apply Cortex-A8 errata workarounds only on affected revisions
Minkyu Kang (9):
S5P: mmc: use the standard debug macro
S5P: Use accessor functions instead of SoC specific defines to access the base address
ARMV7: S5P: make s5p-common for sharing the code between s5pc1xx and s5pc2xx
ARMV7: S5P: rename from s5pc1xx to s5p
S5P: mmc: fix the mmc offset
ARMV7: S5P: rename from CONFIG_S5PC1XX to CONFIG_S5P
ARMV7: S5P: fix the macro at samsung_get_base function
ARMV7: S5P: separate the peripheral clocks
ARMV7: S5P: rename the member of gpio structure
Prafulla Wadaskar (1):
Kirkwood: bugfix: window size (mis)calculation
Reinhard Meyer (7):
AT91: MCI: add SD/MMC driver using mmc framework
AT91: add RTT and GPBR based RTC
AT91SAM9XE: add embedded flash support
AT91: fix at91sam9260.h for AT91SAM9XE
AT91: reset.c: fix comments, add option
AT91/AVR32: atmel_spi.c: flush RDR before next SPI transaction
AT91: add option to enable pullups in at91sam9260_devices.c
Ricardo Salveti de Araujo (1):
ARMV7: Fix pad mux for Panda LEDs
Stefano Babic (1):
MX51: Update responsible for mx51evk
Steve Sakoman (15):
ARMV7: OMAP: Move syslib.c to omap-common since it can be shared by OMAP3 and OMAP4
ARMV7: OMAP: add convenience function to set TWL4030 regulator voltages
ARMV7: OMAP: Enable input driver on Overo's MMC1_CLK and MMC3_CLK pinmux setup
ARMV7: OMAP: Add mpurate boot arg for Overo and Beagle
ARMV7: OMAP: Add board revision detection for Overo
ARMV7: OMAP: Add detection and support for Beagle C4 revision
ARMV7: OMAP: Configure Overo's second network chip
ARMV7: OMAP3: Update CPU type detection for AM35XX/OMAP36XX/37XX
ARMV7: OMAP3: Add clock setup for OMAP36XX/37XX
ARMV7: OMAP3: Fix broken reset command on OMAP36XX/37XX and OMAP4
ARMV7: OMAP3: Remove erroneous hard coded sdram setup for 128MB/bank
mtd: nand: supress 'unknown NAND' warning if no nand is found
ARMV7: OMAP3: Add CONFIG_SYS_NAND_QUIET_TEST to Beagle and Overo configs
ARMV7: OMAP3: Add support for Beagle xM
ARMV7: OMAP: Overo: Autodetect presence/absence of transceiver on mmc2
Wolfgang Denk (5):
Merge branch 'master' of git://git.denx.de/u-boot-marvell
Merge branch 'master' of git://git.denx.de/u-boot-samsung
Merge branch 'at91' of git://git.denx.de/u-boot-atmel
Merge branch 'avr32' of git://git.denx.de/u-boot-atmel
Merge branch 'master' of git://git.denx.de/u-boot-ti
MAINTAINERS | 5 +-
Makefile | 9 +-
arch/arm/cpu/arm926ejs/at91/Makefile | 1 +
arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 56 ++-
arch/arm/cpu/arm926ejs/at91/eflash.c | 271 ++++++++++
arch/arm/cpu/arm926ejs/at91/reset.c | 21 +-
arch/arm/cpu/arm926ejs/at91/timer.c | 5 +-
arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 2 +-
arch/arm/cpu/arm926ejs/orion5x/cpu.c | 2 +-
arch/arm/cpu/armv7/omap-common/Makefile | 2 +
arch/arm/cpu/armv7/omap-common/reset.S | 4 +-
arch/arm/cpu/armv7/{omap3 => omap-common}/syslib.c | 2 -
arch/arm/cpu/armv7/omap3/Makefile | 1 -
arch/arm/cpu/armv7/omap3/board.c | 35 --
arch/arm/cpu/armv7/omap3/cache.S | 101 ++--
arch/arm/cpu/armv7/omap3/clock.c | 549 ++++++++++++++------
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 69 +++
arch/arm/cpu/armv7/omap3/sdrc.c | 43 +-
arch/arm/cpu/armv7/omap3/sys_info.c | 147 +++++-
arch/arm/cpu/armv7/s5p-common/Makefile | 46 ++
.../cpu/armv7/{s5pc1xx => s5p-common}/cpu_info.c | 11 +-
arch/arm/cpu/armv7/{s5pc1xx => s5p-common}/timer.c | 23 +-
arch/arm/cpu/armv7/s5pc1xx/Makefile | 2 -
arch/arm/cpu/armv7/s5pc1xx/clock.c | 51 ++-
arch/arm/cpu/armv7/s5pc1xx/reset.S | 2 +-
arch/arm/cpu/armv7/s5pc1xx/sromc.c | 8 +-
arch/arm/include/asm/arch-at91/at91_common.h | 1 +
arch/arm/include/asm/arch-at91/at91_dbu.h | 41 ++
arch/arm/include/asm/arch-at91/at91_eefc.h | 51 ++
arch/arm/include/asm/arch-at91/at91_gpbr.h | 45 ++
arch/arm/include/asm/arch-at91/at91_pit.h | 2 +-
arch/arm/include/asm/arch-at91/at91_rtt.h | 36 ++
arch/arm/include/asm/arch-at91/at91sam9260.h | 18 +-
arch/arm/include/asm/arch-at91/clk.h | 5 +
arch/arm/include/asm/arch-at91/hardware.h | 1 +
arch/arm/include/asm/arch-omap3/clocks.h | 17 +
arch/arm/include/asm/arch-omap3/clocks_omap3.h | 27 +
arch/arm/include/asm/arch-omap3/cpu.h | 15 +-
arch/arm/include/asm/arch-omap3/omap3.h | 32 ++-
arch/arm/include/asm/arch-omap3/sys_proto.h | 2 +
arch/arm/include/asm/arch-omap4/omap4.h | 1 +
arch/arm/include/asm/arch-omap4/sys_proto.h | 3 +
arch/arm/include/asm/arch-orion5x/cpu.h | 2 +-
arch/arm/include/asm/arch-s5pc1xx/clk.h | 5 +-
arch/arm/include/asm/arch-s5pc1xx/cpu.h | 39 ++-
arch/arm/include/asm/arch-s5pc1xx/gpio.h | 172 +++---
arch/arm/include/asm/arch-s5pc1xx/mmc.h | 2 +-
arch/arm/include/asm/arch-s5pc1xx/pwm.h | 12 +-
arch/avr32/cpu/at32ap700x/Makefile | 2 +-
arch/avr32/cpu/at32ap700x/mmu.c | 78 +++
arch/avr32/cpu/exception.c | 3 +-
arch/avr32/cpu/start.S | 19 +-
arch/avr32/include/asm/arch-at32ap700x/addrspace.h | 5 +-
arch/avr32/include/asm/arch-at32ap700x/mmu.h | 66 +++
arch/avr32/lib/board.c | 4 +
board/atmel/atngw100/atngw100.c | 19 +-
board/atmel/atstk1000/atstk1000.c | 19 +-
board/earthlcd/favr-32-ezkit/favr-32-ezkit.c | 19 +-
board/esd/meesc/meesc.c | 116 +++--
board/eukrea/cpuat91/cpuat91.c | 53 +--
board/mimc/mimc200/mimc200.c | 24 +-
board/miromico/hammerhead/hammerhead.c | 19 +-
board/overo/overo.c | 105 ++++-
board/overo/overo.h | 47 ++-
board/samsung/goni/goni.c | 8 +-
board/samsung/goni/lowlevel_init.S | 6 +-
board/samsung/smdkc100/lowlevel_init.S | 2 +-
board/samsung/smdkc100/onenand.c | 3 +-
board/samsung/smdkc100/smdkc100.c | 4 +-
board/ti/beagle/beagle.c | 102 +++--
board/ti/beagle/beagle.h | 40 ++-
board/ti/panda/panda.h | 44 +-
common/serial.c | 4 +-
doc/README.atmel_mci | 86 +++
drivers/gpio/Makefile | 2 +-
drivers/mmc/Makefile | 5 +-
drivers/mmc/atmel_mci.h | 48 ++-
drivers/mmc/gen_atmel_mci.c | 353 +++++++++++++
drivers/mmc/s5p_mmc.c | 36 +-
drivers/mtd/nand/nand_base.c | 9 +-
drivers/mtd/onenand/samsung.c | 6 +-
drivers/power/twl4030.c | 69 ++--
drivers/rtc/Makefile | 1 +
drivers/rtc/at91sam9_rtt.c | 100 ++++
drivers/serial/Makefile | 2 +-
drivers/serial/serial_s5p.c | 10 +-
drivers/spi/atmel_spi.c | 13 +-
include/configs/atngw100.h | 3 +
include/configs/atstk1002.h | 3 +
include/configs/atstk1003.h | 3 +
include/configs/atstk1004.h | 3 +
include/configs/atstk1006.h | 3 +
include/configs/cpuat91.h | 53 ++-
include/configs/favr-32-ezkit.h | 3 +
include/configs/hammerhead.h | 3 +
include/configs/meesc.h | 26 +-
include/configs/mimc200.h | 3 +
include/configs/omap3_beagle.h | 4 +
include/configs/omap3_overo.h | 4 +
include/configs/otc570.h | 1 +
include/configs/s5p_goni.h | 2 +-
include/configs/smdkc100.h | 2 +-
include/mmc.h | 15 +-
include/serial.h | 2 +-
include/twl4030.h | 14 +
105 files changed, 2900 insertions(+), 795 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/at91/eflash.c
rename arch/arm/cpu/armv7/{omap3 => omap-common}/syslib.c (97%)
create mode 100644 arch/arm/cpu/armv7/s5p-common/Makefile
rename arch/arm/cpu/armv7/{s5pc1xx => s5p-common}/cpu_info.c (83%)
rename arch/arm/cpu/armv7/{s5pc1xx => s5p-common}/timer.c (86%)
create mode 100644 arch/arm/include/asm/arch-at91/at91_dbu.h
create mode 100644 arch/arm/include/asm/arch-at91/at91_eefc.h
create mode 100644 arch/arm/include/asm/arch-at91/at91_gpbr.h
create mode 100644 arch/arm/include/asm/arch-at91/at91_rtt.h
create mode 100644 arch/avr32/cpu/at32ap700x/mmu.c
create mode 100644 arch/avr32/include/asm/arch-at32ap700x/mmu.h
create mode 100644 doc/README.atmel_mci
create mode 100644 drivers/mmc/gen_atmel_mci.c
create mode 100644 drivers/rtc/at91sam9_rtt.c
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
At the source of every error which is blamed on the computer you will
find at least two human errors, including the error of blaming it on
the computer.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-09-09 19:24 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-09-09 19:24 [U-Boot] [PULL] u-boot-arm.git Wolfgang Denk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.