* GA-MA69VM-S2 requires pci=nocrs with 2.6.35.4
@ 2010-09-09 12:16 Simon Arlott
2010-09-13 23:16 ` Bjorn Helgaas
0 siblings, 1 reply; 5+ messages in thread
From: Simon Arlott @ 2010-09-09 12:16 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1239 bytes --]
With a Gigabyte GA-MA69VM-S2 690V motherboard, it stalls in
qurk_usb_early_handoff unless pci=nocrs is used:
[ 299.177004] calling pci_apply_final_quirks+0x0/0x11e @ 1
[ 299.177004] pci 0000:00:00.0: pci_apply_final_quirks
[ 299.177004] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x21
[ 299.177004] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x5dd
[ 299.177004] pci 0000:00:00.0: calling pci_fixup_video+0x0/0x9c
[ 299.177004] pci 0000:00:01.0: pci_apply_final_quirks
[ 299.177004] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x21
[ 299.177004] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x5dd
[ 299.177004] pci 0000:00:01.0: calling pci_fixup_video+0x0/0x9c
[ 299.177004] pci 0000:00:12.0: pci_apply_final_quirks
[ 299.177004] pci 0000:00:12.0: calling quirk_cardbus_legacy+0x0/0x21
[ 299.177004] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x5dd
[ 299.177004] pci 0000:00:12.0: calling pci_fixup_video+0x0/0x9c
[ 299.177004] pci 0000:00:13.0: pci_apply_final_quirks
[ 299.177004] pci 0000:00:13.0: calling quirk_cardbus_legacy+0x0/0x21
[ 299.177004] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x5dd
Full dmesg with/without pci=nocrs attached.
--
Simon Arlott
[-- Attachment #2: stalled.txt --]
[-- Type: text/plain, Size: 35436 bytes --]
[ 0.000000] Linux version 2.6.35.4-git+ (byte@proxima) (gcc version 4.3.1 (Gentoo 4.3.1 p1.0) ) #git+ SMP PREEMPT 2010-08-25T23:29:08+0100
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007dee0000 (usable)
[ 0.000000] BIOS-e820: 000000007dee0000 - 000000007dee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007dee3000 - 000000007def0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007def0000 - 000000007df00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7dee0 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f5140] f5140
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] ACPI: RSDP 000f6b00 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 7dee3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 7dee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 7dee30c0 049B3 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 7dee0000 00040
[ 0.000000] ACPI: SSDT 7dee7b40 00248 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 7dee7dc0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 7dee7e00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 7dee7a80 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] 1122MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x0007dee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007dee0
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at 7df00000 (gap: 7df00000:62100000)
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @c2000000 s30400 r0 d22848 u1048576
[ 0.000000] pcpu-alloc: s30400 r0 d22848 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511680
[ 0.000000] Kernel command line: root=/dev/sda1 ro panic=10 init=/startup sysrq_always_enabled console=ttyS0,115200 vga=0xf07 initcall_debug=1 tsc=reliable
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Subtract (44 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000200000 - 0000c781e4] TEXT DATA BSS
[ 0.000000] #3 [0000c79000 - 0000c810fe] BRK
[ 0.000000] #4 [00000f5150 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000f5140 - 00000f5150] MP-table mpf
[ 0.000000] #6 [000009f800 - 00000f0f00] BIOS reserved
[ 0.000000] #7 [00000f1054 - 00000f5140] BIOS reserved
[ 0.000000] #8 [00000f0f00 - 00000f1054] MP-table mpc
[ 0.000000] #9 [0000002000 - 0000003000] TRAMPOLINE
[ 0.000000] #10 [0000007000 - 0000008000] PGTABLE
[ 0.000000] #11 [0001000000 - 0001001000] BOOTMEM
[ 0.000000] #12 [0001001000 - 0001fc1000] BOOTMEM
[ 0.000000] #13 [0001fc1000 - 0001fc1004] BOOTMEM
[ 0.000000] #14 [0001fc1040 - 0001fc1280] BOOTMEM
[ 0.000000] #15 [0001fc1280 - 0001fc1328] BOOTMEM
[ 0.000000] #16 [0001fc1340 - 0001fca340] BOOTMEM
[ 0.000000] #17 [0001fca340 - 0001fca414] BOOTMEM
[ 0.000000] #18 [0001fca440 - 0001fdc440] BOOTMEM
[ 0.000000] #19 [0001fdc440 - 0001fdc46d] BOOTMEM
[ 0.000000] #20 [0001fdc480 - 0001fdc4af] BOOTMEM
[ 0.000000] #21 [0001fdc4c0 - 0001fdc628] BOOTMEM
[ 0.000000] #22 [0001fdc640 - 0001fdc680] BOOTMEM
[ 0.000000] #23 [0001fdc680 - 0001fdc6c0] BOOTMEM
[ 0.000000] #24 [0001fdc6c0 - 0001fdc700] BOOTMEM
[ 0.000000] #25 [0001fdc700 - 0001fdc740] BOOTMEM
[ 0.000000] #26 [0001fdc740 - 0001fdc780] BOOTMEM
[ 0.000000] #27 [0001fdc780 - 0001fdc7c0] BOOTMEM
[ 0.000000] #28 [0001fdc7c0 - 0001fdc800] BOOTMEM
[ 0.000000] #29 [0001fdc800 - 0001fdc840] BOOTMEM
[ 0.000000] #30 [0001fdc840 - 0001fdc880] BOOTMEM
[ 0.000000] #31 [0001fdc880 - 0001fdc8fb] BOOTMEM
[ 0.000000] #32 [0001fdc900 - 0001fdc97b] BOOTMEM
[ 0.000000] #33 [0002000000 - 000200d000] BOOTMEM
[ 0.000000] #34 [0002100000 - 000210d000] BOOTMEM
[ 0.000000] #35 [0001fde980 - 0001fde984] BOOTMEM
[ 0.000000] #36 [0001fde9c0 - 0001fde9c4] BOOTMEM
[ 0.000000] #37 [0001fdea00 - 0001fdea08] BOOTMEM
[ 0.000000] #38 [0001fdea40 - 0001fdea48] BOOTMEM
[ 0.000000] #39 [0001fdea80 - 0001fdeb20] BOOTMEM
[ 0.000000] #40 [0001fdeb40 - 0001fdeb88] BOOTMEM
[ 0.000000] #41 [0001fdebc0 - 0001fe2bc0] BOOTMEM
[ 0.000000] #42 [000200d000 - 000208d000] BOOTMEM
[ 0.000000] #43 [000208d000 - 00020cd000] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007dee0)
[ 0.000000] Memory: 2034932k/2063232k available (3157k kernel code, 27908k reserved, 1766k data, 376k init, 1149832k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc06cf000 - 0xc072d000 ( 376 kB)
[ 0.000000] .data : 0xc0515612 - 0xc06ceff4 (1766 kB)
[ 0.000000] .text : 0xc0200000 - 0xc0515612 (3157 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:320
[ 0.000000] Console: colour VGA+ 80x60
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3567 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2305.362 MHz processor.
[ 0.003003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4610.72 BogoMIPS (lpj=2305362)
[ 0.005004] pid_max: default: 32768 minimum: 301
[ 0.006071] Security Framework initialized
[ 0.007065] TCP/UDP port access control v1.1 LSM initialised
[ 0.008045] Mount-cache hash table entries: 512
[ 0.010056] CPU: Physical Processor ID: 0
[ 0.011003] CPU: Processor Core ID: 0
[ 0.012004] mce: CPU supports 5 MCE banks
[ 0.013011] using C1E aware idle routine
[ 0.014009] Performance Events: AMD PMU driver.
[ 0.016010] ... version: 0
[ 0.017003] ... bit width: 48
[ 0.018003] ... generic registers: 4
[ 0.019003] ... value mask: 0000ffffffffffff
[ 0.020003] ... max period: 00007fffffffffff
[ 0.021003] ... fixed-purpose events: 0
[ 0.022003] ... event mask: 000000000000000f
[ 0.024284] Freeing SMP alternatives: 16k freed
[ 0.025017] ACPI: Core revision 20100428
[ 0.037039] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.038565] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.049049] CPU0: AMD Athlon(tm) Dual Core Processor 4450e stepping 02
[ 0.052999] calling migration_init+0x0/0x47 @ 1
[ 0.053007] initcall migration_init+0x0/0x47 returned 0 after 0 usecs
[ 0.054003] calling spawn_ksoftirqd+0x0/0x43 @ 1
[ 0.056043] initcall spawn_ksoftirqd+0x0/0x43 returned 0 after 976 usecs
[ 0.057004] calling init_call_single_data+0x0/0x80 @ 1
[ 0.058004] initcall init_call_single_data+0x0/0x80 returned 0 after 0 usecs
[ 0.059004] calling cpu_stop_init+0x0/0x9b @ 1
[ 0.061016] initcall cpu_stop_init+0x0/0x9b returned 0 after 976 usecs
[ 0.062003] calling spawn_softlockup_task+0x0/0x5f @ 1
[ 0.064016] initcall spawn_softlockup_task+0x0/0x5f returned 0 after 976 usecs
[ 0.067009] lockdep: fixing up alternatives.
[ 0.068103] Booting Node 0, Processors #1 Ok.
[ 0.003999] Initializing CPU#1
[ 0.141083] Brought up 2 CPUs
[ 0.142003] Total of 2 processors activated (9221.11 BogoMIPS).
[ 0.144267] calling init_mmap_min_addr+0x0/0x11 @ 1
[ 0.149007] initcall init_mmap_min_addr+0x0/0x11 returned 0 after 0 usecs
[ 0.156005] calling init_cpufreq_transition_notifier_list+0x0/0x18 @ 1
[ 0.162007] initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs
[ 0.171004] calling net_ns_init+0x0/0x162 @ 1
[ 0.175032] initcall net_ns_init+0x0/0x162 returned 0 after 0 usecs
[ 0.182004] calling cpufreq_tsc+0x0/0x25 @ 1
[ 0.186004] initcall cpufreq_tsc+0x0/0x25 returned 0 after 0 usecs
[ 0.192004] calling pci_reboot_init+0x0/0x11 @ 1
[ 0.197006] initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs
[ 0.203004] calling reboot_init+0x0/0x11 @ 1
[ 0.208011] initcall reboot_init+0x0/0x11 returned 0 after 0 usecs
[ 0.214003] calling init_lapic_sysfs+0x0/0x28 @ 1
[ 0.219064] initcall init_lapic_sysfs+0x0/0x28 returned 0 after 0 usecs
[ 0.226007] calling init_smp_flush+0x0/0x2a @ 1
[ 0.230004] initcall init_smp_flush+0x0/0x2a returned 0 after 0 usecs
[ 0.237004] calling sysctl_init+0x0/0x2d @ 1
[ 0.241006] initcall sysctl_init+0x0/0x2d returned 0 after 0 usecs
[ 0.247004] calling ksysfs_init+0x0/0x74 @ 1
[ 0.251012] initcall ksysfs_init+0x0/0x74 returned 0 after 976 usecs
[ 0.258003] calling async_init+0x0/0x50 @ 1
[ 0.262017] initcall async_init+0x0/0x50 returned 0 after 0 usecs
[ 0.263004] calling init_jiffies_clocksource+0x0/0xf @ 1
[ 0.264005] initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs
[ 0.265003] calling pm_init+0x0/0x2d @ 1
[ 0.266010] initcall pm_init+0x0/0x2d returned 0 after 0 usecs
[ 0.267003] calling init_hw_breakpoint+0x0/0xaf @ 1
[ 0.268005] initcall init_hw_breakpoint+0x0/0xaf returned 0 after 0 usecs
[ 0.270004] calling init_zero_pfn+0x0/0x14 @ 1
[ 0.271003] initcall init_zero_pfn+0x0/0x14 returned 0 after 0 usecs
[ 0.272003] calling filelock_init+0x0/0x27 @ 1
[ 0.273013] initcall filelock_init+0x0/0x27 returned 0 after 0 usecs
[ 0.274004] calling init_script_binfmt+0x0/0x11 @ 1
[ 0.275021] initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs
[ 0.276003] calling init_elf_binfmt+0x0/0x11 @ 1
[ 0.277003] initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs
[ 0.278004] calling random32_init+0x0/0xa8 @ 1
[ 0.279004] initcall random32_init+0x0/0xa8 returned 0 after 0 usecs
[ 0.280004] calling cpufreq_core_init+0x0/0x7b @ 1
[ 0.281007] initcall cpufreq_core_init+0x0/0x7b returned 0 after 0 usecs
[ 0.282004] calling cpuidle_init+0x0/0x32 @ 1
[ 0.283011] initcall cpuidle_init+0x0/0x32 returned 0 after 0 usecs
[ 0.284004] calling sock_init+0x0/0x51 @ 1
[ 0.285123] initcall sock_init+0x0/0x51 returned 0 after 0 usecs
[ 0.286004] calling netlink_proto_init+0x0/0x108 @ 1
[ 0.287040] NET: Registered protocol family 16
[ 0.288055] initcall netlink_proto_init+0x0/0x108 returned 0 after 976 usecs
[ 0.289003] calling bdi_class_init+0x0/0x2f @ 1
[ 0.290031] initcall bdi_class_init+0x0/0x2f returned 0 after 0 usecs
[ 0.291005] calling kobject_uevent_init+0x0/0x1e @ 1
[ 0.292017] initcall kobject_uevent_init+0x0/0x1e returned 0 after 0 usecs
[ 0.293003] calling pcibus_class_init+0x0/0x14 @ 1
[ 0.295030] initcall pcibus_class_init+0x0/0x14 returned 0 after 976 usecs
[ 0.296004] calling pci_driver_init+0x0/0xf @ 1
[ 0.297039] initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs
[ 0.298005] calling tty_class_init+0x0/0x2f @ 1
[ 0.299029] initcall tty_class_init+0x0/0x2f returned 0 after 0 usecs
[ 0.300005] calling vtconsole_class_init+0x0/0xa1 @ 1
[ 0.301075] initcall vtconsole_class_init+0x0/0xa1 returned 0 after 0 usecs
[ 0.302005] calling i2c_init+0x0/0x57 @ 1
[ 0.303061] initcall i2c_init+0x0/0x57 returned 0 after 0 usecs
[ 0.304008] calling amd_postcore_init+0x0/0xa72 @ 1
[ 0.305010] TOM: 0000000080000000 aka 2048M
[ 0.306038] initcall amd_postcore_init+0x0/0xa72 returned 0 after 976 usecs
[ 0.307004] calling arch_kdebugfs_init+0x0/0x11 @ 1
[ 0.308004] initcall arch_kdebugfs_init+0x0/0x11 returned 0 after 0 usecs
[ 0.309003] calling init_pit_clocksource+0x0/0x98 @ 1
[ 0.310003] initcall init_pit_clocksource+0x0/0x98 returned 0 after 0 usecs
[ 0.311003] calling mtrr_if_init+0x0/0x44 @ 1
[ 0.312008] initcall mtrr_if_init+0x0/0x44 returned 0 after 0 usecs
[ 0.313003] calling ffh_cstate_init+0x0/0x27 @ 1
[ 0.314003] initcall ffh_cstate_init+0x0/0x27 returned -1 after 0 usecs
[ 0.315004] initcall ffh_cstate_init+0x0/0x27 returned with error code -1
[ 0.316004] calling acpi_pci_init+0x0/0x51 @ 1
[ 0.317019] ACPI: bus type pci registered
[ 0.318003] initcall acpi_pci_init+0x0/0x51 returned 0 after 976 usecs
[ 0.319003] calling dmi_id_init+0x0/0x26e @ 1
[ 0.320081] initcall dmi_id_init+0x0/0x26e returned 0 after 0 usecs
[ 0.321008] calling pci_arch_init+0x0/0x62 @ 1
[ 0.322035] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.323004] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.324002] PCI: Using MMCONFIG for extended config space
[ 0.325003] PCI: Using configuration type 1 for base access
[ 0.326015] initcall pci_arch_init+0x0/0x62 returned 0 after 3906 usecs
[ 0.327003] calling topology_init+0x0/0x46 @ 1
[ 0.328050] initcall topology_init+0x0/0x46 returned 0 after 0 usecs
[ 0.329010] calling mtrr_init_finialize+0x0/0x35 @ 1
[ 0.330004] initcall mtrr_init_finialize+0x0/0x35 returned 0 after 0 usecs
[ 0.331003] calling param_sysfs_init+0x0/0x18e @ 1
[ 0.342111] initcall param_sysfs_init+0x0/0x18e returned 0 after 9765 usecs
[ 0.343048] calling pm_sysrq_init+0x0/0x16 @ 1
[ 0.344022] initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 usecs
[ 0.345004] calling init_slow_work+0x0/0x32 @ 1
[ 0.346004] initcall init_slow_work+0x0/0x32 returned 0 after 0 usecs
[ 0.347005] calling default_bdi_init+0x0/0xa4 @ 1
[ 0.348090] initcall default_bdi_init+0x0/0xa4 returned 0 after 0 usecs
[ 0.349055] calling init_bio+0x0/0xb9 @ 1
[ 0.350112] bio: create slab <bio-0> at 0
[ 0.351012] initcall init_bio+0x0/0xb9 returned 0 after 976 usecs
[ 0.352003] calling fsnotify_init+0x0/0x19 @ 1
[ 0.353008] initcall fsnotify_init+0x0/0x19 returned 0 after 0 usecs
[ 0.354003] calling fsnotify_notification_init+0x0/0xe7 @ 1
[ 0.355023] initcall fsnotify_notification_init+0x0/0xe7 returned 0 after 0 usecs
[ 0.356003] calling cryptomgr_init+0x0/0xf @ 1
[ 0.357005] initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs
[ 0.358003] calling blk_settings_init+0x0/0x1d @ 1
[ 0.359003] initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs
[ 0.360003] calling blk_ioc_init+0x0/0x24 @ 1
[ 0.361013] initcall blk_ioc_init+0x0/0x24 returned 0 after 0 usecs
[ 0.362003] calling blk_softirq_init+0x0/0x51 @ 1
[ 0.363004] initcall blk_softirq_init+0x0/0x51 returned 0 after 0 usecs
[ 0.364003] calling blk_iopoll_setup+0x0/0x51 @ 1
[ 0.365004] initcall blk_iopoll_setup+0x0/0x51 returned 0 after 0 usecs
[ 0.366003] calling genhd_device_init+0x0/0x50 @ 1
[ 0.367051] initcall genhd_device_init+0x0/0x50 returned 0 after 0 usecs
[ 0.368010] calling pci_slot_init+0x0/0x3b @ 1
[ 0.369006] initcall pci_slot_init+0x0/0x3b returned 0 after 0 usecs
[ 0.370003] calling acpi_init+0x0/0x2b6 @ 1
[ 0.378873] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.392585] ACPI: Interpreter enabled
[ 0.396003] ACPI: (supports S0 S5)
[ 0.399586] ACPI: Using IOAPIC for interrupt routing
[ 0.419060] initcall acpi_init+0x0/0x2b6 returned 0 after 46875 usecs
[ 0.425024] calling dock_init+0x0/0x81 @ 1
[ 0.430047] ACPI: No dock devices found.
[ 0.434004] initcall dock_init+0x0/0x81 returned 0 after 4882 usecs
[ 0.440004] calling acpi_pci_root_init+0x0/0x2a @ 1
[ 0.445005] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.454232] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.461348] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.468004] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.474004] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.481004] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.489004] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.496049] pci 0000:00:00.0: calling quirk_no_ata_d3+0x0/0x1c
[ 0.502029] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1cf
[ 0.509067] pci 0000:00:01.0: calling quirk_no_ata_d3+0x0/0x1c
[ 0.515020] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x1cf
[ 0.521079] pci 0000:00:12.0: calling quirk_no_ata_d3+0x0/0x1c
[ 0.527074] pci 0000:00:12.0: calling quirk_amd_ide_mode+0x0/0xc2
[ 0.533006] pci 0000:00:12.0: calling quirk_resource_alignment+0x0/0x1cf
[ 0.540058] pci 0000:00:13.0: calling quirk_no_ata_d3+0x0/0x1c
[ 0.546061] pci 0000:00:13.0: calling quirk_resource_alignment+0x0/0x1cf
[ 0.553023] pci 0000:00:13.1: calling quirk_no_ata_d3+0x0/0x1c
[ 0.559060] pci 0000:00:13.1: calling quirk_resource_alignment+0x0/0x1cf
[ 0.565024] pci 0000:00:13.2: calling quirk_no_ata_d3+0x0/0x1c
[ 0.571060] pci 0000:00:13.2: calling quirk_resource_alignment+0x0/0x1cf
[ 0.578023] pci 0000:00:13.3: calling quirk_no_ata_d3+0x0/0x1c
[ 0.584060] pci 0000:00:13.3: calling quirk_resource_alignment+0x0/0x1cf
[ 0.591024] pci 0000:00:13.4: calling quirk_no_ata_d3+0x0/0x1c
[ 0.596060] pci 0000:00:13.4: calling quirk_resource_alignment+0x0/0x1cf
[ 0.603039] pci 0000:00:13.5: calling quirk_no_ata_d3+0x0/0x1c
[ 0.609060] pci 0000:00:13.5: calling quirk_resource_alignment+0x0/0x1cf
[ 0.616079] pci 0000:00:14.0: calling quirk_no_ata_d3+0x0/0x1c
[ 0.622004] pci 0000:00:14.0: calling sb600_disable_hpet_bar+0x0/0x4f
[ 0.628068] pci 0000:00:14.0: calling force_disable_hpet_msi+0x0/0xc
[ 0.635004] pci 0000:00:14.0: calling quirk_resource_alignment+0x0/0x1cf
[ 0.641052] pci 0000:00:14.1: calling quirk_no_ata_d3+0x0/0x1c
[ 0.647073] pci 0000:00:14.1: calling quirk_resource_alignment+0x0/0x1cf
[ 0.654061] pci 0000:00:14.2: calling quirk_no_ata_d3+0x0/0x1c
[ 0.660060] pci 0000:00:14.2: calling quirk_resource_alignment+0x0/0x1cf
[ 0.667061] pci 0000:00:14.3: calling quirk_no_ata_d3+0x0/0x1c
[ 0.673034] pci 0000:00:14.3: calling quirk_resource_alignment+0x0/0x1cf
[ 0.679037] pci 0000:00:14.4: calling quirk_no_ata_d3+0x0/0x1c
[ 0.685027] pci 0000:00:14.4: calling quirk_resource_alignment+0x0/0x1cf
[ 0.692053] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x1cf
[ 0.699045] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x1cf
[ 0.705036] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x1cf
[ 0.712039] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x1cf
[ 0.719076] pci 0000:01:05.0: calling quirk_no_ata_d3+0x0/0x1c
[ 0.725044] pci 0000:01:05.0: calling quirk_resource_alignment+0x0/0x1cf
[ 0.732044] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.737166] pci 0000:02:07.0: calling quirk_resource_alignment+0x0/0x1cf
[ 0.744006] pci 0000:02:07.0: calling pci_fixup_transparent_bridge+0x0/0x2b
[ 0.751179] pci 0000:02:07.1: calling quirk_resource_alignment+0x0/0x1cf
[ 0.758004] pci 0000:02:07.1: calling pci_fixup_transparent_bridge+0x0/0x2b
[ 0.765127] pci 0000:02:0f.0: calling quirk_resource_alignment+0x0/0x1cf
[ 0.771083] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.823054] initcall acpi_pci_root_init+0x0/0x2a returned 0 after 369140 usecs
[ 0.830005] calling acpi_pci_link_init+0x0/0x3f @ 1
[ 0.835182] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.843150] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.851093] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.858345] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.866343] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.874342] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.882346] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.890148] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.898018] initcall acpi_pci_link_init+0x0/0x3f returned 0 after 61523 usecs
[ 0.899005] calling pnp_init+0x0/0xf @ 1
[ 0.900043] initcall pnp_init+0x0/0xf returned 0 after 0 usecs
[ 0.901004] calling misc_init+0x0/0x9b @ 1
[ 0.902057] initcall misc_init+0x0/0x9b returned 0 after 0 usecs
[ 0.903005] calling vga_arb_device_init+0x0/0x68 @ 1
[ 0.904140] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.905012] vgaarb: loaded
[ 0.906003] initcall vga_arb_device_init+0x0/0x68 returned 0 after 1953 usecs
[ 0.907003] calling init_scsi+0x0/0x74 @ 1
[ 0.909059] SCSI subsystem initialized
[ 0.912009] initcall init_scsi+0x0/0x74 returned 0 after 3906 usecs
[ 0.919003] calling ata_init+0x0/0x2ab @ 1
[ 0.923021] initcall ata_init+0x0/0x2ab returned 0 after 0 usecs
[ 0.924007] calling usb_init+0x0/0xfa @ 1
[ 0.925078] usbcore: registered new interface driver usbfs
[ 0.926067] usbcore: registered new interface driver hub
[ 0.927050] usbcore: registered new device driver usb
[ 0.932006] initcall usb_init+0x0/0xfa returned 0 after 6835 usecs
[ 0.939003] calling serio_init+0x0/0x73 @ 1
[ 0.943046] initcall serio_init+0x0/0x73 returned 0 after 0 usecs
[ 0.944009] calling input_init+0x0/0x10f @ 1
[ 0.946000] initcall input_init+0x0/0x10f returned 0 after 976 usecs
[ 0.952009] calling power_supply_class_init+0x0/0x39 @ 1
[ 0.957032] initcall power_supply_class_init+0x0/0x39 returned 0 after 0 usecs
[ 0.965005] calling hwmon_init+0x0/0xf3 @ 1
[ 0.969033] initcall hwmon_init+0x0/0xf3 returned 0 after 0 usecs
[ 0.975006] calling thermal_init+0x0/0x46 @ 1
[ 0.980029] initcall thermal_init+0x0/0x46 returned 0 after 976 usecs
[ 0.986005] calling md_init+0x0/0xb7 @ 1
[ 0.990013] initcall md_init+0x0/0xb7 returned 0 after 0 usecs
[ 0.996004] calling init_soundcore+0x0/0x83 @ 1
[ 1.001026] initcall init_soundcore+0x0/0x83 returned 0 after 976 usecs
[ 1.007004] calling alsa_sound_init+0x0/0x88 @ 1
[ 1.012074] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 1.018004] initcall alsa_sound_init+0x0/0x88 returned 0 after 5859 usecs
[ 1.025004] calling pci_subsys_init+0x0/0x44 @ 1
[ 1.030002] PCI: Using ACPI for IRQ routing
[ 1.034049] pci 0000:00:14.0: no compatible bridge window for [mem 0xfed00000-0xfed003ff]
[ 1.042119] calling proto_init+0x0/0xf @ 1
[ 1.047009] initcall proto_init+0x0/0xf returned 0 after 0 usecs
[ 1.053004] calling net_dev_init+0x0/0x1d5 @ 1
[ 1.058013] initcall net_dev_init+0x0/0x1d5 returned 0 after 976 usecs
[ 1.064004] calling neigh_init+0x0/0x66 @ 1
[ 1.068004] initcall neigh_init+0x0/0x66 returned 0 after 0 usecs
[ 1.074003] calling fib_rules_init+0x0/0x99 @ 1
[ 1.079005] initcall fib_rules_init+0x0/0x99 returned 0 after 0 usecs
[ 1.086003] calling pktsched_init+0x0/0xce @ 1
[ 1.090024] initcall pktsched_init+0x0/0xce returned 0 after 0 usecs
[ 1.096003] calling tc_filter_init+0x0/0x43 @ 1
[ 1.101003] initcall tc_filter_init+0x0/0x43 returned 0 after 0 usecs
[ 1.108003] calling tc_action_init+0x0/0x43 @ 1
[ 1.112004] initcall tc_action_init+0x0/0x43 returned 0 after 0 usecs
[ 1.119003] calling genl_init+0x0/0x77 @ 1
[ 1.123070] initcall genl_init+0x0/0x77 returned 0 after 0 usecs
[ 1.129004] calling atm_init+0x0/0xbc @ 1
[ 1.133004] NET: Registered protocol family 8
[ 1.137002] NET: Registered protocol family 20
[ 1.142031] initcall atm_init+0x0/0xbc returned 0 after 8789 usecs
[ 1.148009] calling sysctl_init+0x0/0x3b @ 1
[ 1.152005] initcall sysctl_init+0x0/0x3b returned 0 after 0 usecs
[ 1.159004] calling print_ICs+0x0/0x4e1 @ 1
[ 1.163003] initcall print_ICs+0x0/0x4e1 returned 0 after 0 usecs
[ 1.169003] calling hpet_late_init+0x0/0x22e @ 1
[ 1.174010] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.179199] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 1.187003] initcall hpet_late_init+0x0/0x22e returned 0 after 12695 usecs
[ 1.194003] calling init_k8_nbs+0x0/0x21 @ 1
[ 1.198067] initcall init_k8_nbs+0x0/0x21 returned 0 after 0 usecs
[ 1.204004] calling clocksource_done_booting+0x0/0x53 @ 1
[ 1.210005] Switching to clocksource hpet
[ 1.214099] initcall clocksource_done_booting+0x0/0x53 returned 0 after 3926 usecs
[ 1.221608] calling init_pipe_fs+0x0/0x3d @ 1
[ 1.226144] initcall init_pipe_fs+0x0/0x3d returned 0 after 77 usecs
[ 1.232501] calling eventpoll_init+0x0/0xb9 @ 1
[ 1.237178] initcall eventpoll_init+0x0/0xb9 returned 0 after 47 usecs
[ 1.243717] calling anon_inode_init+0x0/0xf5 @ 1
[ 1.248499] initcall anon_inode_init+0x0/0xf5 returned 0 after 65 usecs
[ 1.255122] calling blk_scsi_ioctl_init+0x0/0x294 @ 1
[ 1.260275] initcall blk_scsi_ioctl_init+0x0/0x294 returned 0 after 2 usecs
[ 1.267246] calling acpi_event_init+0x0/0x46 @ 1
[ 1.271975] initcall acpi_event_init+0x0/0x46 returned 0 after 14 usecs
[ 1.278599] calling pnpacpi_init+0x0/0x7b @ 1
[ 1.283053] pnp: PnP ACPI init
[ 1.286148] ACPI: bus type pnp registered
[ 1.291339] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:02:0f.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 1.308933] pnp: PnP ACPI: found 14 devices
[ 1.313140] ACPI: ACPI bus type pnp unregistered
[ 1.317770] initcall pnpacpi_init+0x0/0x7b returned 0 after 33901 usecs
[ 1.324396] calling pnp_system_init+0x0/0xf @ 1
[ 1.329050] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 1.334980] system 00:01: [io 0x0220-0x0225] has been reserved
[ 1.340907] system 00:01: [io 0x0290-0x0294] has been reserved
[ 1.346843] system 00:02: [io 0x4100-0x411f] has been reserved
[ 1.352774] system 00:02: [io 0x0228-0x022f] has been reserved
[ 1.358700] system 00:02: [io 0x040b] has been reserved
[ 1.364023] system 00:02: [io 0x04d6] has been reserved
[ 1.369344] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 1.375273] system 00:02: [io 0x0c14] has been reserved
[ 1.380593] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 1.386520] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 1.392449] system 00:02: [io 0x0c6f] has been reserved
[ 1.397770] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 1.403697] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 1.409626] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 1.415557] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 1.421482] system 00:02: [io 0x4210-0x4217] has been reserved
[ 1.427412] system 00:02: [io 0x0b00-0x0b1f] could not be reserved
[ 1.433686] system 00:02: [io 0x0238-0x023f] has been reserved
[ 1.439615] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 1.446852] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.453478] system 00:0d: [mem 0x000cd400-0x000cffff] has been reserved
[ 1.460102] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 1.467069] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 1.474038] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 1.481014] system 00:0d: [mem 0x7dee0000-0x7defffff] could not be reserved
[ 1.487984] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[ 1.494604] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.501572] system 00:0d: [mem 0x00100000-0x7dedffff] could not be reserved
[ 1.508542] system 00:0d: [mem 0x7dff0000-0x7ffeffff] could not be reserved
[ 1.515510] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.522476] system 00:0d: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 1.529445] system 00:0d: [mem 0xfff80000-0xfffeffff] has been reserved
[ 1.536141] initcall pnp_system_init+0x0/0xf returned 0 after 202260 usecs
[ 1.543033] calling chr_dev_init+0x0/0xb0 @ 1
[ 1.554552] initcall chr_dev_init+0x0/0xb0 returned 0 after 6894 usecs
[ 1.561142] calling firmware_class_init+0x0/0x14 @ 1
[ 1.566352] initcall firmware_class_init+0x0/0x14 returned 0 after 79 usecs
[ 1.573333] calling ieee1394_init+0x0/0x208 @ 1
[ 1.578505] initcall ieee1394_init+0x0/0x208 returned 0 after 529 usecs
[ 1.585129] calling cpufreq_gov_performance_init+0x0/0xf @ 1
[ 1.590906] initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 22 usecs
[ 1.598568] calling init_acpi_pm_clocksource+0x0/0x1a7 @ 1
[ 1.638698] initcall init_acpi_pm_clocksource+0x0/0x1a7 returned 0 after 33736 usecs
[ 1.646443] calling pcibios_assign_resources+0x0/0x81 @ 1
[ 1.651998] pci 0000:00:14.0: BAR 1: assigned [mem 0x80000000-0x800003ff]
[ 1.658796] pci 0000:00:14.0: BAR 1: set to [mem 0x80000000-0x800003ff] (PCI address [0x80000000-0x800003ff]
[ 299.177004] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 299.177004] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 299.177004] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff]
[ 299.177004] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
[ 299.177004] pci 0000:02:0f.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
[ 299.177004] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[ 299.177004] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 299.177004] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 299.177004] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 299.177004] initcall pcibios_assign_resources+0x0/0x81 returned 0 after 290550845 usecs
[ 299.177004] calling sysctl_core_init+0x0/0x2d @ 1
[ 299.177004] initcall sysctl_core_init+0x0/0x2d returned 0 after 0 usecs
[ 299.177004] calling inet_init+0x0/0x1f6 @ 1
[ 299.177004] NET: Registered protocol family 2
[ 299.177004] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 299.177004] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 299.177004] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 299.177004] TCP: Hash tables configured (established 131072 bind 65536)
[ 299.177004] TCP reno registered
[ 299.177004] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 299.177004] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 299.177004] initcall inet_init+0x0/0x1f6 returned 0 after 0 usecs
[ 299.177004] calling af_unix_init+0x0/0x47 @ 1
[ 299.177004] NET: Registered protocol family 1
[ 299.177004] initcall af_unix_init+0x0/0x47 returned 0 after 0 usecs
[ 299.177004] calling pci_apply_final_quirks+0x0/0x11e @ 1
[ 299.177004] pci 0000:00:00.0: pci_apply_final_quirks
[ 299.177004] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x21
[ 299.177004] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x5dd
[ 299.177004] pci 0000:00:00.0: calling pci_fixup_video+0x0/0x9c
[ 299.177004] pci 0000:00:01.0: pci_apply_final_quirks
[ 299.177004] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x21
[ 299.177004] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x5dd
[ 299.177004] pci 0000:00:01.0: calling pci_fixup_video+0x0/0x9c
[ 299.177004] pci 0000:00:12.0: pci_apply_final_quirks
[ 299.177004] pci 0000:00:12.0: calling quirk_cardbus_legacy+0x0/0x21
[ 299.177004] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x5dd
[ 299.177004] pci 0000:00:12.0: calling pci_fixup_video+0x0/0x9c
[ 299.177004] pci 0000:00:13.0: pci_apply_final_quirks
[ 299.177004] pci 0000:00:13.0: calling quirk_cardbus_legacy+0x0/0x21
[ 299.177004] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x5dd
=stalled=
[-- Attachment #3: pci=nocrs.txt --]
[-- Type: text/plain, Size: 124620 bytes --]
[ 0.000000] Linux version 2.6.35.4-git+ (byte@proxima) (gcc version 4.3.1 (Gentoo 4.3.1 p1.0) ) #git+ SMP PREEMPT 2010-08-25T23:29:08+0100
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007dee0000 (usable)
[ 0.000000] BIOS-e820: 000000007dee0000 - 000000007dee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007dee3000 - 000000007def0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007def0000 - 000000007df00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7dee0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 007DF00000 mask FFFFF00000 uncachable
[ 0.000000] 2 base 007E000000 mask FFFE000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01000000
[ 0.000000] found SMP MP-table at [c00f5140] f5140
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037a00000 page 2M
[ 0.000000] 0037a00000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 7000-c000
[ 0.000000] ACPI: RSDP 000f6b00 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 7dee3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 7dee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 7dee30c0 049B3 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 7dee0000 00040
[ 0.000000] ACPI: SSDT 7dee7b40 00248 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 7dee7dc0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 7dee7e00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 7dee7a80 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1122MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x0007dee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007dee0
[ 0.000000] On node 0 totalpages: 515710
[ 0.000000] free_area_init_node: node 0, pgdat c06ca980, node_mem_map c1001020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3966 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2246 pages used for memmap
[ 0.000000] HighMem zone: 285212 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [3000 - 37ff]
[ 0.000000] Allocating PCI resources starting at 7df00000 (gap: 7df00000:62100000)
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @c2000000 s30400 r0 d22848 u1048576
[ 0.000000] pcpu-alloc: s30400 r0 d22848 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511680
[ 0.000000] Kernel command line: root=/dev/sda1 ro panic=10 init=/startup sysrq_always_enabled console=ttyS0,115200 vga=0xf07 initcall_debug=1 tsc=reliable pci=nocrs
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Subtract (44 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000200000 - 0000c781e4] TEXT DATA BSS
[ 0.000000] #3 [0000c79000 - 0000c810fe] BRK
[ 0.000000] #4 [00000f5150 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000f5140 - 00000f5150] MP-table mpf
[ 0.000000] #6 [000009f800 - 00000f0f00] BIOS reserved
[ 0.000000] #7 [00000f1054 - 00000f5140] BIOS reserved
[ 0.000000] #8 [00000f0f00 - 00000f1054] MP-table mpc
[ 0.000000] #9 [0000002000 - 0000003000] TRAMPOLINE
[ 0.000000] #10 [0000007000 - 0000008000] PGTABLE
[ 0.000000] #11 [0001000000 - 0001001000] BOOTMEM
[ 0.000000] #12 [0001001000 - 0001fc1000] BOOTMEM
[ 0.000000] #13 [0001fc1000 - 0001fc1004] BOOTMEM
[ 0.000000] #14 [0001fc1040 - 0001fc1280] BOOTMEM
[ 0.000000] #15 [0001fc1280 - 0001fc1328] BOOTMEM
[ 0.000000] #16 [0001fc1340 - 0001fca340] BOOTMEM
[ 0.000000] #17 [0001fca340 - 0001fca414] BOOTMEM
[ 0.000000] #18 [0001fca440 - 0001fdc440] BOOTMEM
[ 0.000000] #19 [0001fdc440 - 0001fdc46d] BOOTMEM
[ 0.000000] #20 [0001fdc480 - 0001fdc4af] BOOTMEM
[ 0.000000] #21 [0001fdc4c0 - 0001fdc628] BOOTMEM
[ 0.000000] #22 [0001fdc640 - 0001fdc680] BOOTMEM
[ 0.000000] #23 [0001fdc680 - 0001fdc6c0] BOOTMEM
[ 0.000000] #24 [0001fdc6c0 - 0001fdc700] BOOTMEM
[ 0.000000] #25 [0001fdc700 - 0001fdc740] BOOTMEM
[ 0.000000] #26 [0001fdc740 - 0001fdc780] BOOTMEM
[ 0.000000] #27 [0001fdc780 - 0001fdc7c0] BOOTMEM
[ 0.000000] #28 [0001fdc7c0 - 0001fdc800] BOOTMEM
[ 0.000000] #29 [0001fdc800 - 0001fdc840] BOOTMEM
[ 0.000000] #30 [0001fdc840 - 0001fdc880] BOOTMEM
[ 0.000000] #31 [0001fdc880 - 0001fdc905] BOOTMEM
[ 0.000000] #32 [0001fdc940 - 0001fdc9c5] BOOTMEM
[ 0.000000] #33 [0002000000 - 000200d000] BOOTMEM
[ 0.000000] #34 [0002100000 - 000210d000] BOOTMEM
[ 0.000000] #35 [0001fdea00 - 0001fdea04] BOOTMEM
[ 0.000000] #36 [0001fdea40 - 0001fdea44] BOOTMEM
[ 0.000000] #37 [0001fdea80 - 0001fdea88] BOOTMEM
[ 0.000000] #38 [0001fdeac0 - 0001fdeac8] BOOTMEM
[ 0.000000] #39 [0001fdeb00 - 0001fdeba0] BOOTMEM
[ 0.000000] #40 [0001fdebc0 - 0001fdec08] BOOTMEM
[ 0.000000] #41 [0001fdec40 - 0001fe2c40] BOOTMEM
[ 0.000000] #42 [000200d000 - 000208d000] BOOTMEM
[ 0.000000] #43 [000208d000 - 00020cd000] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007dee0)
[ 0.000000] Memory: 2034932k/2063232k available (3157k kernel code, 27908k reserved, 1766k data, 376k init, 1149832k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc06cf000 - 0xc072d000 ( 376 kB)
[ 0.000000] .data : 0xc05155ca - 0xc06ceff4 (1766 kB)
[ 0.000000] .text : 0xc0200000 - 0xc05155ca (3157 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:320
[ 0.000000] Console: colour VGA+ 80x60
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3567 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2305.745 MHz processor.
[ 0.003003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4611.49 BogoMIPS (lpj=2305745)
[ 0.005004] pid_max: default: 32768 minimum: 301
[ 0.006071] Security Framework initialized
[ 0.007065] TCP/UDP port access control v1.1 LSM initialised
[ 0.008045] Mount-cache hash table entries: 512
[ 0.010052] CPU: Physical Processor ID: 0
[ 0.011003] CPU: Processor Core ID: 0
[ 0.012004] mce: CPU supports 5 MCE banks
[ 0.013011] using C1E aware idle routine
[ 0.014010] Performance Events: AMD PMU driver.
[ 0.016010] ... version: 0
[ 0.017003] ... bit width: 48
[ 0.018003] ... generic registers: 4
[ 0.019003] ... value mask: 0000ffffffffffff
[ 0.020003] ... max period: 00007fffffffffff
[ 0.021003] ... fixed-purpose events: 0
[ 0.022004] ... event mask: 000000000000000f
[ 0.024109] Freeing SMP alternatives: 16k freed
[ 0.025017] ACPI: Core revision 20100428
[ 0.035210] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.037335] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.048354] CPU0: AMD Athlon(tm) Dual Core Processor 4450e stepping 02
[ 0.051999] calling migration_init+0x0/0x47 @ 1
[ 0.052006] initcall migration_init+0x0/0x47 returned 0 after 0 usecs
[ 0.053003] calling spawn_ksoftirqd+0x0/0x43 @ 1
[ 0.055043] initcall spawn_ksoftirqd+0x0/0x43 returned 0 after 976 usecs
[ 0.056004] calling init_call_single_data+0x0/0x80 @ 1
[ 0.057004] initcall init_call_single_data+0x0/0x80 returned 0 after 0 usecs
[ 0.058003] calling cpu_stop_init+0x0/0x9b @ 1
[ 0.060017] initcall cpu_stop_init+0x0/0x9b returned 0 after 976 usecs
[ 0.061003] calling spawn_softlockup_task+0x0/0x5f @ 1
[ 0.063016] initcall spawn_softlockup_task+0x0/0x5f returned 0 after 976 usecs
[ 0.066008] lockdep: fixing up alternatives.
[ 0.067104] Booting Node 0, Processors #1 Ok.
[ 0.003999] Initializing CPU#1
[ 0.140099] Brought up 2 CPUs
[ 0.141003] Total of 2 processors activated (9221.86 BogoMIPS).
[ 0.144065] calling init_mmap_min_addr+0x0/0x11 @ 1
[ 0.145005] initcall init_mmap_min_addr+0x0/0x11 returned 0 after 0 usecs
[ 0.146004] calling init_cpufreq_transition_notifier_list+0x0/0x18 @ 1
[ 0.147006] initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs
[ 0.148026] calling net_ns_init+0x0/0x162 @ 1
[ 0.149027] initcall net_ns_init+0x0/0x162 returned 0 after 0 usecs
[ 0.150004] calling cpufreq_tsc+0x0/0x25 @ 1
[ 0.151003] initcall cpufreq_tsc+0x0/0x25 returned 0 after 0 usecs
[ 0.152005] calling pci_reboot_init+0x0/0x11 @ 1
[ 0.153006] initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs
[ 0.154003] calling reboot_init+0x0/0x11 @ 1
[ 0.155011] initcall reboot_init+0x0/0x11 returned 0 after 0 usecs
[ 0.157003] calling init_lapic_sysfs+0x0/0x28 @ 1
[ 0.158038] initcall init_lapic_sysfs+0x0/0x28 returned 0 after 0 usecs
[ 0.159018] calling init_smp_flush+0x0/0x2a @ 1
[ 0.160004] initcall init_smp_flush+0x0/0x2a returned 0 after 0 usecs
[ 0.161003] calling sysctl_init+0x0/0x2d @ 1
[ 0.162005] initcall sysctl_init+0x0/0x2d returned 0 after 0 usecs
[ 0.163004] calling ksysfs_init+0x0/0x74 @ 1
[ 0.164010] initcall ksysfs_init+0x0/0x74 returned 0 after 0 usecs
[ 0.165003] calling async_init+0x0/0x50 @ 1
[ 0.166017] initcall async_init+0x0/0x50 returned 0 after 0 usecs
[ 0.172006] calling init_jiffies_clocksource+0x0/0xf @ 1
[ 0.177006] initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs
[ 0.184004] calling pm_init+0x0/0x2d @ 1
[ 0.188015] initcall pm_init+0x0/0x2d returned 0 after 0 usecs
[ 0.194004] calling init_hw_breakpoint+0x0/0xaf @ 1
[ 0.199005] initcall init_hw_breakpoint+0x0/0xaf returned 0 after 0 usecs
[ 0.206003] calling init_zero_pfn+0x0/0x14 @ 1
[ 0.210003] initcall init_zero_pfn+0x0/0x14 returned 0 after 0 usecs
[ 0.217003] calling filelock_init+0x0/0x27 @ 1
[ 0.221027] initcall filelock_init+0x0/0x27 returned 0 after 0 usecs
[ 0.228004] calling init_script_binfmt+0x0/0x11 @ 1
[ 0.233023] initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs
[ 0.240003] calling init_elf_binfmt+0x0/0x11 @ 1
[ 0.244004] initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs
[ 0.251004] calling random32_init+0x0/0xa8 @ 1
[ 0.255004] initcall random32_init+0x0/0xa8 returned 0 after 0 usecs
[ 0.262004] calling cpufreq_core_init+0x0/0x7b @ 1
[ 0.267007] initcall cpufreq_core_init+0x0/0x7b returned 0 after 0 usecs
[ 0.273003] calling cpuidle_init+0x0/0x32 @ 1
[ 0.278008] initcall cpuidle_init+0x0/0x32 returned 0 after 0 usecs
[ 0.284004] calling sock_init+0x0/0x51 @ 1
[ 0.288146] initcall sock_init+0x0/0x51 returned 0 after 0 usecs
[ 0.294004] calling netlink_proto_init+0x0/0x108 @ 1
[ 0.299043] NET: Registered protocol family 16
[ 0.304056] initcall netlink_proto_init+0x0/0x108 returned 0 after 4882 usecs
[ 0.311003] calling bdi_class_init+0x0/0x2f @ 1
[ 0.316033] initcall bdi_class_init+0x0/0x2f returned 0 after 0 usecs
[ 0.322009] calling kobject_uevent_init+0x0/0x1e @ 1
[ 0.327028] initcall kobject_uevent_init+0x0/0x1e returned 0 after 0 usecs
[ 0.334004] calling pcibus_class_init+0x0/0x14 @ 1
[ 0.339062] initcall pcibus_class_init+0x0/0x14 returned 0 after 0 usecs
[ 0.346006] calling pci_driver_init+0x0/0xf @ 1
[ 0.350040] initcall pci_driver_init+0x0/0xf returned 0 after 976 usecs
[ 0.357010] calling tty_class_init+0x0/0x2f @ 1
[ 0.362031] initcall tty_class_init+0x0/0x2f returned 0 after 0 usecs
[ 0.368005] calling vtconsole_class_init+0x0/0xa1 @ 1
[ 0.374063] initcall vtconsole_class_init+0x0/0xa1 returned 0 after 976 usecs
[ 0.381008] calling i2c_init+0x0/0x57 @ 1
[ 0.385061] initcall i2c_init+0x0/0x57 returned 0 after 0 usecs
[ 0.391006] calling amd_postcore_init+0x0/0xa72 @ 1
[ 0.396006] node 0 link 0: io port [d000, ffff]
[ 0.396010] TOM: 0000000080000000 aka 2048M
[ 0.400003] node 0 link 0: mmio [a0000, bffff]
[ 0.400007] node 0 link 0: mmio [fc000000, fe02ffff]
[ 0.400011] node 0 link 0: mmio [80000000, f9ffffff]
[ 0.400014] node 0 link 0: mmio [fa000000, fbffffff]
[ 0.400018] node 0 link 0: mmio [e0000000, efffffff]
[ 0.400022] bus: [00, 02] on node 0 link 0
[ 0.400025] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.400027] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.400030] bus: 00 index 2 [mem 0xfa000000-0xfcffffffff]
[ 0.400033] bus: 00 index 3 [mem 0x80000000-0xf9ffffff]
[ 0.400038] initcall amd_postcore_init+0x0/0xa72 returned 0 after 3906 usecs
[ 0.407004] calling arch_kdebugfs_init+0x0/0x11 @ 1
[ 0.412004] initcall arch_kdebugfs_init+0x0/0x11 returned 0 after 0 usecs
[ 0.419003] calling init_pit_clocksource+0x0/0x98 @ 1
[ 0.424004] initcall init_pit_clocksource+0x0/0x98 returned 0 after 0 usecs
[ 0.431004] calling mtrr_if_init+0x0/0x44 @ 1
[ 0.436007] initcall mtrr_if_init+0x0/0x44 returned 0 after 0 usecs
[ 0.442004] calling ffh_cstate_init+0x0/0x27 @ 1
[ 0.447004] initcall ffh_cstate_init+0x0/0x27 returned -1 after 0 usecs
[ 0.453004] initcall ffh_cstate_init+0x0/0x27 returned with error code -1
[ 0.460004] calling acpi_pci_init+0x0/0x51 @ 1
[ 0.465018] ACPI: bus type pci registered
[ 0.469004] initcall acpi_pci_init+0x0/0x51 returned 0 after 3906 usecs
[ 0.475003] calling dmi_id_init+0x0/0x26e @ 1
[ 0.480081] initcall dmi_id_init+0x0/0x26e returned 0 after 0 usecs
[ 0.486011] calling pci_arch_init+0x0/0x62 @ 1
[ 0.491038] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.500004] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.507002] PCI: Using MMCONFIG for extended config space
[ 0.512002] PCI: Using configuration type 1 for base access
[ 0.518015] initcall pci_arch_init+0x0/0x62 returned 0 after 26367 usecs
[ 0.524003] calling topology_init+0x0/0x46 @ 1
[ 0.529046] initcall topology_init+0x0/0x46 returned 0 after 0 usecs
[ 0.535021] calling mtrr_init_finialize+0x0/0x35 @ 1
[ 0.541004] initcall mtrr_init_finialize+0x0/0x35 returned 0 after 0 usecs
[ 0.547004] calling param_sysfs_init+0x0/0x18e @ 1
[ 0.562114] initcall param_sysfs_init+0x0/0x18e returned 0 after 9765 usecs
[ 0.569045] calling pm_sysrq_init+0x0/0x16 @ 1
[ 0.574018] initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 usecs
[ 0.580004] calling init_slow_work+0x0/0x32 @ 1
[ 0.585004] initcall init_slow_work+0x0/0x32 returned 0 after 0 usecs
[ 0.591003] calling default_bdi_init+0x0/0xa4 @ 1
[ 0.596091] initcall default_bdi_init+0x0/0xa4 returned 0 after 0 usecs
[ 0.603044] calling init_bio+0x0/0xb9 @ 1
[ 0.607092] bio: create slab <bio-0> at 0
[ 0.611012] initcall init_bio+0x0/0xb9 returned 0 after 3906 usecs
[ 0.617003] calling fsnotify_init+0x0/0x19 @ 1
[ 0.622008] initcall fsnotify_init+0x0/0x19 returned 0 after 0 usecs
[ 0.628003] calling fsnotify_notification_init+0x0/0xe7 @ 1
[ 0.634023] initcall fsnotify_notification_init+0x0/0xe7 returned 0 after 0 usecs
[ 0.641004] calling cryptomgr_init+0x0/0xf @ 1
[ 0.646004] initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs
[ 0.652003] calling blk_settings_init+0x0/0x1d @ 1
[ 0.657004] initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs
[ 0.664003] calling blk_ioc_init+0x0/0x24 @ 1
[ 0.668013] initcall blk_ioc_init+0x0/0x24 returned 0 after 0 usecs
[ 0.675003] calling blk_softirq_init+0x0/0x51 @ 1
[ 0.679004] initcall blk_softirq_init+0x0/0x51 returned 0 after 0 usecs
[ 0.686003] calling blk_iopoll_setup+0x0/0x51 @ 1
[ 0.691004] initcall blk_iopoll_setup+0x0/0x51 returned 0 after 0 usecs
[ 0.697003] calling genhd_device_init+0x0/0x50 @ 1
[ 0.702054] initcall genhd_device_init+0x0/0x50 returned 0 after 0 usecs
[ 0.709043] calling pci_slot_init+0x0/0x3b @ 1
[ 0.714007] initcall pci_slot_init+0x0/0x3b returned 0 after 0 usecs
[ 0.720004] calling acpi_init+0x0/0x2b6 @ 1
[ 0.728497] ACPI: EC: Look up EC in DSDT
[ 0.732519] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.742159] ACPI: Interpreter enabled
[ 0.743002] ACPI: (supports S0 S5)
[ 0.745290] ACPI: Using IOAPIC for interrupt routing
[ 0.760150] initcall acpi_init+0x0/0x2b6 returned 0 after 35156 usecs
[ 0.761048] calling dock_init+0x0/0x81 @ 1
[ 0.762323] ACPI: No dock devices found.
[ 0.763004] initcall dock_init+0x0/0x81 returned 0 after 976 usecs
[ 0.764004] calling acpi_pci_root_init+0x0/0x2a @ 1
[ 0.765007] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.766234] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.768134] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.768138] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.768141] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.768144] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.768147] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.768375] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07]
[ 0.768385] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03]
[ 0.768394] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07]
[ 0.768403] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.768413] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.768423] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.768499] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.768574] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.768650] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 0.768725] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.768801] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.768892] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.768965] pci 0000:00:13.5: supports D1 D2
[ 0.768967] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.768974] pci 0000:00:13.5: PME# disabled
[ 0.769033] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
[ 0.769042] pci 0000:00:14.0: reg 14: [mem 0xfed00000-0xfed003ff]
[ 0.769151] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.769160] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.769169] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.769178] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.769187] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f]
[ 0.769281] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.769347] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.769353] pci 0000:00:14.2: PME# disabled
[ 0.769659] PCI: peer root bus 00 res updated from pci conf
[ 0.769725] pci 0000:01:05.0: reg 10: [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.769735] pci 0000:01:05.0: reg 18: [mem 0xfdff0000-0xfdffffff 64bit]
[ 0.769741] pci 0000:01:05.0: reg 20: [io 0xee00-0xeeff]
[ 0.769747] pci 0000:01:05.0: reg 24: [mem 0xfde00000-0xfdefffff]
[ 0.769769] pci 0000:01:05.0: supports D1 D2
[ 0.769802] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.770006] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.770011] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff]
[ 0.770017] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.770112] pci 0000:02:07.0: reg 10: [mem 0xfdda0000-0xfddbffff 64bit]
[ 0.770140] pci 0000:02:07.0: reg 20: [io 0xdf00-0xdf3f]
[ 0.770201] pci 0000:02:07.0: PME# supported from D0 D3hot D3cold
[ 0.770207] pci 0000:02:07.0: PME# disabled
[ 0.770286] pci 0000:02:07.1: reg 10: [mem 0xfddc0000-0xfdddffff 64bit]
[ 0.770314] pci 0000:02:07.1: reg 20: [io 0xde00-0xde3f]
[ 0.770374] pci 0000:02:07.1: PME# supported from D0 D3hot D3cold
[ 0.770380] pci 0000:02:07.1: PME# disabled
[ 0.770467] pci 0000:02:0f.0: reg 10: [io 0xdc00-0xdcff]
[ 0.770477] pci 0000:02:0f.0: reg 14: [mem 0xfddff000-0xfddff0ff]
[ 0.770519] pci 0000:02:0f.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.770551] pci 0000:02:0f.0: supports D1 D2
[ 0.770553] pci 0000:02:0f.0: PME# supported from D1 D2 D3hot D3cold
[ 0.770560] pci 0000:02:0f.0: PME# disabled
[ 0.770606] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.771006] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 0.771013] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.771019] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.771023] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.771026] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.771030] pci 0000:00:14.4: bridge window [mem 0xfa000000-0xfcffffffff] (subtractive decode)
[ 0.771033] pci 0000:00:14.4: bridge window [mem 0x80000000-0xf9ffffff] (subtractive decode)
[ 0.771048] pci_bus 0000:00: on NUMA node 0
[ 0.771055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.772440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.772753] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.815099] initcall acpi_pci_root_init+0x0/0x2a returned 0 after 48828 usecs
[ 0.816011] calling acpi_pci_link_init+0x0/0x3f @ 1
[ 0.817181] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.821350] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.825347] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.829349] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.834152] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.839023] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.843349] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.847349] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.851272] initcall acpi_pci_link_init+0x0/0x3f returned 0 after 33203 usecs
[ 0.852022] calling pnp_init+0x0/0xf @ 1
[ 0.853038] initcall pnp_init+0x0/0xf returned 0 after 0 usecs
[ 0.854009] calling misc_init+0x0/0x9b @ 1
[ 0.855055] initcall misc_init+0x0/0x9b returned 0 after 0 usecs
[ 0.856006] calling vga_arb_device_init+0x0/0x68 @ 1
[ 0.858092] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.859012] vgaarb: loaded
[ 0.860003] initcall vga_arb_device_init+0x0/0x68 returned 0 after 2929 usecs
[ 0.861003] calling init_scsi+0x0/0x74 @ 1
[ 0.862143] SCSI subsystem initialized
[ 0.863009] initcall init_scsi+0x0/0x74 returned 0 after 976 usecs
[ 0.864003] calling ata_init+0x0/0x2ab @ 1
[ 0.865027] libata version 3.00 loaded.
[ 0.865027] initcall ata_init+0x0/0x2ab returned 0 after 0 usecs
[ 0.871008] calling usb_init+0x0/0xfa @ 1
[ 0.876055] usbcore: registered new interface driver usbfs
[ 0.881064] usbcore: registered new interface driver hub
[ 0.887050] usbcore: registered new device driver usb
[ 0.888005] initcall usb_init+0x0/0xfa returned 0 after 12695 usecs
[ 0.889003] calling serio_init+0x0/0x73 @ 1
[ 0.890048] initcall serio_init+0x0/0x73 returned 0 after 0 usecs
[ 0.896009] calling input_init+0x0/0x10f @ 1
[ 0.901039] initcall input_init+0x0/0x10f returned 0 after 0 usecs
[ 0.907010] calling power_supply_class_init+0x0/0x39 @ 1
[ 0.913028] initcall power_supply_class_init+0x0/0x39 returned 0 after 0 usecs
[ 0.920008] calling hwmon_init+0x0/0xf3 @ 1
[ 0.924032] initcall hwmon_init+0x0/0xf3 returned 0 after 0 usecs
[ 0.930008] calling thermal_init+0x0/0x46 @ 1
[ 0.935031] initcall thermal_init+0x0/0x46 returned 0 after 0 usecs
[ 0.941005] calling md_init+0x0/0xb7 @ 1
[ 0.945014] initcall md_init+0x0/0xb7 returned 0 after 0 usecs
[ 0.951004] calling init_soundcore+0x0/0x83 @ 1
[ 0.956029] initcall init_soundcore+0x0/0x83 returned 0 after 0 usecs
[ 0.962010] calling alsa_sound_init+0x0/0x88 @ 1
[ 0.967075] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.973004] initcall alsa_sound_init+0x0/0x88 returned 0 after 5859 usecs
[ 0.980004] calling pci_subsys_init+0x0/0x44 @ 1
[ 0.985002] PCI: Using ACPI for IRQ routing
[ 0.989004] PCI: pci_cache_line_size set to 64 bytes
[ 0.989156] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.989160] reserve RAM buffer: 000000007dee0000 - 000000007fffffff initcall pci_subsys_init+0x0/0x44 returned 0 after 3906 usecs
[ 0.989170] calling proto_init+0x0/0xf @ 1
[ 0.993009] initcall proto_init+0x0/0xf returned 0 after 0 usecs
[ 0.999004] calling net_dev_init+0x0/0x1d5 @ 1
[ 1.004248] initcall net_dev_init+0x0/0x1d5 returned 0 after 0 usecs
[ 1.011007] calling neigh_init+0x0/0x66 @ 1
[ 1.015005] initcall neigh_init+0x0/0x66 returned 0 after 0 usecs
[ 1.021004] calling fib_rules_init+0x0/0x99 @ 1
[ 1.026006] initcall fib_rules_init+0x0/0x99 returned 0 after 0 usecs
[ 1.032003] calling pktsched_init+0x0/0xce @ 1
[ 1.037025] initcall pktsched_init+0x0/0xce returned 0 after 0 usecs
[ 1.043003] calling tc_filter_init+0x0/0x43 @ 1
[ 1.048003] initcall tc_filter_init+0x0/0x43 returned 0 after 0 usecs
[ 1.054011] calling tc_action_init+0x0/0x43 @ 1
[ 1.059003] initcall tc_action_init+0x0/0x43 returned 0 after 0 usecs
[ 1.065003] calling genl_init+0x0/0x77 @ 1
[ 1.069052] initcall genl_init+0x0/0x77 returned 0 after 0 usecs
[ 1.075004] calling atm_init+0x0/0xbc @ 1
[ 1.079004] NET: Registered protocol family 8
[ 1.084002] NET: Registered protocol family 20
[ 1.088031] initcall atm_init+0x0/0xbc returned 0 after 8789 usecs
[ 1.095014] calling sysctl_init+0x0/0x3b @ 1
[ 1.099005] initcall sysctl_init+0x0/0x3b returned 0 after 0 usecs
[ 1.105004] calling print_ICs+0x0/0x4e1 @ 1
[ 1.109004] initcall print_ICs+0x0/0x4e1 returned 0 after 0 usecs
[ 1.115003] calling hpet_late_init+0x0/0x22e @ 1
[ 1.120010] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.125760] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 1.133003] initcall hpet_late_init+0x0/0x22e returned 0 after 12695 usecs
[ 1.140005] calling init_k8_nbs+0x0/0x21 @ 1
[ 1.145039] initcall init_k8_nbs+0x0/0x21 returned 0 after 0 usecs
[ 1.151005] calling clocksource_done_booting+0x0/0x53 @ 1
[ 1.156006] Switching to clocksource hpet
[ 1.160092] initcall clocksource_done_booting+0x0/0x53 returned 0 after 3929 usecs
[ 1.167607] calling init_pipe_fs+0x0/0x3d @ 1
[ 1.172153] initcall init_pipe_fs+0x0/0x3d returned 0 after 84 usecs
[ 1.178512] calling eventpoll_init+0x0/0xb9 @ 1
[ 1.183193] initcall eventpoll_init+0x0/0xb9 returned 0 after 50 usecs
[ 1.189727] calling anon_inode_init+0x0/0xf5 @ 1
[ 1.194507] initcall anon_inode_init+0x0/0xf5 returned 0 after 63 usecs
[ 1.201132] calling blk_scsi_ioctl_init+0x0/0x294 @ 1
[ 1.206282] initcall blk_scsi_ioctl_init+0x0/0x294 returned 0 after 1 usecs
[ 1.213248] calling acpi_event_init+0x0/0x46 @ 1
[ 1.217974] initcall acpi_event_init+0x0/0x46 returned 0 after 9 usecs
[ 1.224506] calling pnpacpi_init+0x0/0x7b @ 1
[ 1.228960] pnp: PnP ACPI init
[ 1.232055] ACPI: bus type pnp registered
[ 1.237220] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:02:0f.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 1.254826] pnp: PnP ACPI: found 14 devices
[ 1.259032] ACPI: ACPI bus type pnp unregistered
[ 1.263666] initcall pnpacpi_init+0x0/0x7b returned 0 after 33890 usecs
[ 1.270284] calling pnp_system_init+0x0/0xf @ 1
[ 1.274936] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 1.280868] system 00:01: [io 0x0220-0x0225] has been reserved
[ 1.286796] system 00:01: [io 0x0290-0x0294] has been reserved
[ 1.292729] system 00:02: [io 0x4100-0x411f] has been reserved
[ 1.298661] system 00:02: [io 0x0228-0x022f] has been reserved
[ 1.304587] system 00:02: [io 0x040b] has been reserved
[ 1.309909] system 00:02: [io 0x04d6] has been reserved
[ 1.315230] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 1.321159] system 00:02: [io 0x0c14] has been reserved
[ 1.326481] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 1.332410] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 1.338337] system 00:02: [io 0x0c6f] has been reserved
[ 1.343661] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 1.349587] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 1.355514] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 1.361442] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 1.367371] system 00:02: [io 0x4210-0x4217] has been reserved
[ 1.373298] system 00:02: [io 0x0b00-0x0b1f] could not be reserved
[ 1.379573] system 00:02: [io 0x0238-0x023f] has been reserved
[ 1.385502] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 1.392738] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.399368] system 00:0d: [mem 0x000cd400-0x000cffff] has been reserved
[ 1.405993] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 1.412959] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 1.419925] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 1.426893] system 00:0d: [mem 0x7dee0000-0x7defffff] could not be reserved
[ 1.433862] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[ 1.440484] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.447450] system 00:0d: [mem 0x00100000-0x7dedffff] could not be reserved
[ 1.454419] system 00:0d: [mem 0x7dff0000-0x7ffeffff] could not be reserved
[ 1.461388] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.468356] system 00:0d: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 1.475323] system 00:0d: [mem 0xfff80000-0xfffeffff] has been reserved
[ 1.482028] initcall pnp_system_init+0x0/0xf returned 0 after 202260 usecs
[ 1.488914] calling chr_dev_init+0x0/0xb0 @ 1
[ 1.500397] initcall chr_dev_init+0x0/0xb0 returned 0 after 6860 usecs
[ 1.506991] calling firmware_class_init+0x0/0x14 @ 1
[ 1.512152] initcall firmware_class_init+0x0/0x14 returned 0 after 73 usecs
[ 1.519168] calling ieee1394_init+0x0/0x208 @ 1
[ 1.524366] initcall ieee1394_init+0x0/0x208 returned 0 after 549 usecs
[ 1.530992] calling cpufreq_gov_performance_init+0x0/0xf @ 1
[ 1.536772] initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 23 usecs
[ 1.544432] calling init_acpi_pm_clocksource+0x0/0x1a7 @ 1
[ 1.584559] initcall init_acpi_pm_clocksource+0x0/0x1a7 returned 0 after 33735 usecs
[ 1.592309] calling pcibios_assign_resources+0x0/0x81 @ 1
[ 1.597859] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.603097] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 1.609200] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff]
[ 1.615996] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
[ 1.623747] pci 0000:02:0f.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
[ 1.630978] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[ 1.636214] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 1.642319] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 1.649121] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 1.656368] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 1.656371] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 1.656374] pci_bus 0000:00: resource 6 [mem 0xfa000000-0xfcffffffff]
[ 1.656378] pci_bus 0000:00: resource 7 [mem 0x80000000-0xf9ffffff]
[ 1.656381] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.656384] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdffffff]
[ 1.656387] pci_bus 0000:01: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
[ 1.656391] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 1.656394] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 1.656397] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[ 1.656400] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 1.656403] pci_bus 0000:02: resource 5 [mem 0x000a0000-0x000bffff]
[ 1.656406] pci_bus 0000:02: resource 6 [mem 0xfa000000-0xfcffffffff]
[ 1.656409] pci_bus 0000:02: resource 7 [mem 0x80000000-0xf9ffffff]
[ 1.656415] initcall pcibios_assign_resources+0x0/0x81 returned 0 after 57237 usecs
[ 1.664078] calling sysctl_core_init+0x0/0x2d @ 1
[ 1.668897] initcall sysctl_core_init+0x0/0x2d returned 0 after 16 usecs
[ 1.675604] calling inet_init+0x0/0x1f6 @ 1
[ 1.679964] NET: Registered protocol family 2
[ 1.684497] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.692105] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.700213] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 1.711683] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.718339] TCP reno registered
[ 1.721501] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 1.727507] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 1.734118] initcall inet_init+0x0/0x1f6 returned 0 after 52958 usecs
[ 1.740571] calling af_unix_init+0x0/0x47 @ 1
[ 1.745042] NET: Registered protocol family 1
[ 1.749416] initcall af_unix_init+0x0/0x47 returned 0 after 4286 usecs
[ 1.755954] calling pci_apply_final_quirks+0x0/0xea @ 1
[ 1.826074] pci 0000:01:05.0: Boot video device
[ 1.826092] PCI: CLS 4 bytes, default 64
[ 1.826097] initcall pci_apply_final_quirks+0x0/0xea returned 0 after 63300 usecs
[ 1.833585] calling default_rootfs+0x0/0x65 @ 1
[ 1.838293] initcall default_rootfs+0x0/0x65 returned 0 after 75 usecs
[ 1.844832] calling pci_iommu_init+0x0/0xd @ 1
[ 1.849377] initcall pci_iommu_init+0x0/0xd returned 0 after 1 usecs
[ 1.855735] calling i8259A_init_sysfs+0x0/0x2b @ 1
[ 1.860790] initcall i8259A_init_sysfs+0x0/0x2b returned 0 after 162 usecs
[ 1.867669] calling sbf_init+0x0/0xdd @ 1
[ 1.871778] initcall sbf_init+0x0/0xdd returned 0 after 1 usecs
[ 1.877705] calling i8237A_init_sysfs+0x0/0x1d @ 1
[ 1.882730] initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 133 usecs
[ 1.889619] calling add_rtc_cmos+0x0/0x9d @ 1
[ 1.894081] initcall add_rtc_cmos+0x0/0x9d returned 0 after 3 usecs
[ 1.900360] calling cache_sysfs_init+0x0/0x2c5 @ 1
[ 1.905864] initcall cache_sysfs_init+0x0/0x2c5 returned 0 after 600 usecs
[ 1.912753] calling mcheck_init_device+0x0/0x262 @ 1
[ 1.918179] initcall mcheck_init_device+0x0/0x262 returned 0 after 355 usecs
[ 1.925242] calling threshold_init_device+0x0/0x6f @ 1
[ 1.930492] initcall threshold_init_device+0x0/0x6f returned 0 after 14 usecs
[ 1.937634] calling thermal_throttle_init_device+0x0/0x5f @ 1
[ 1.943478] initcall thermal_throttle_init_device+0x0/0x5f returned 0 after 1 usecs
[ 1.951138] calling msr_init+0x0/0x11c @ 1
[ 1.955612] initcall msr_init+0x0/0x11c returned 0 after 270 usecs
[ 1.961807] calling cpuid_init+0x0/0x11c @ 1
[ 1.966447] initcall cpuid_init+0x0/0x11c returned 0 after 264 usecs
[ 1.972815] calling ioapic_init_sysfs+0x0/0x84 @ 1
[ 1.977842] initcall ioapic_init_sysfs+0x0/0x84 returned 0 after 135 usecs
[ 1.984733] calling add_pcspkr+0x0/0x24 @ 1
[ 1.989097] initcall add_pcspkr+0x0/0x24 returned 0 after 84 usecs
[ 1.995296] calling aes_init+0x0/0xf @ 1
[ 1.999529] initcall aes_init+0x0/0xf returned 0 after 206 usecs
[ 2.005559] calling init_sched_debug_procfs+0x0/0x27 @ 1
[ 2.010975] initcall init_sched_debug_procfs+0x0/0x27 returned 0 after 8 usecs
[ 2.018204] calling proc_schedstat_init+0x0/0x1c @ 1
[ 2.023269] initcall proc_schedstat_init+0x0/0x1c returned 0 after 3 usecs
[ 2.030155] calling proc_execdomains_init+0x0/0x1c @ 1
[ 2.035394] initcall proc_execdomains_init+0x0/0x1c returned 0 after 3 usecs
[ 2.042453] calling ioresources_init+0x0/0x31 @ 1
[ 2.047268] initcall ioresources_init+0x0/0x31 returned 0 after 5 usecs
[ 2.053894] calling uid_cache_init+0x0/0x78 @ 1
[ 2.058565] initcall uid_cache_init+0x0/0x78 returned 0 after 40 usecs
[ 2.065100] calling init_posix_timers+0x0/0x14c @ 1
[ 2.070092] initcall init_posix_timers+0x0/0x14c returned 0 after 14 usecs
[ 2.076975] calling init_posix_cpu_timers+0x0/0xb8 @ 1
[ 2.082211] initcall init_posix_cpu_timers+0x0/0xb8 returned 0 after 1 usecs
[ 2.089271] calling nsproxy_cache_init+0x0/0x27 @ 1
[ 2.094271] initcall nsproxy_cache_init+0x0/0x27 returned 0 after 23 usecs
[ 2.101154] calling timekeeping_init_device+0x0/0x1d @ 1
[ 2.106719] initcall timekeeping_init_device+0x0/0x1d returned 0 after 153 usecs
[ 2.114130] calling init_clocksource_sysfs+0x0/0x43 @ 1
[ 2.119599] initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 135 usecs
[ 2.126925] calling init_timer_list_procfs+0x0/0x27 @ 1
[ 2.132262] initcall init_timer_list_procfs+0x0/0x27 returned 0 after 10 usecs
[ 2.139494] calling init_tstats_procfs+0x0/0x27 @ 1
[ 2.144475] initcall init_tstats_procfs+0x0/0x27 returned 0 after 3 usecs
[ 2.151273] calling lockdep_proc_init+0x0/0x4f @ 1
[ 2.156171] initcall lockdep_proc_init+0x0/0x4f returned 0 after 8 usecs
[ 2.162879] calling futex_init+0x0/0x70 @ 1
[ 2.167190] initcall futex_init+0x0/0x70 returned 0 after 28 usecs
[ 2.173384] calling proc_dma_init+0x0/0x1c @ 1
[ 2.177929] initcall proc_dma_init+0x0/0x1c returned 0 after 3 usecs
[ 2.184295] calling proc_modules_init+0x0/0x1c @ 1
[ 2.189187] initcall proc_modules_init+0x0/0x1c returned 0 after 3 usecs
[ 2.195900] calling kallsyms_init+0x0/0x1f @ 1
[ 2.200447] initcall kallsyms_init+0x0/0x1f returned 0 after 3 usecs
[ 2.206812] calling ikconfig_init+0x0/0x3a @ 1
[ 2.211355] initcall ikconfig_init+0x0/0x3a returned 0 after 3 usecs
[ 2.217721] calling hung_task_init+0x0/0x42 @ 1
[ 2.222397] initcall hung_task_init+0x0/0x42 returned 0 after 44 usecs
[ 2.228938] calling utsname_sysctl_init+0x0/0x11 @ 1
[ 2.234001] initcall utsname_sysctl_init+0x0/0x11 returned 0 after 3 usecs
[ 2.240885] calling init_lstats_procfs+0x0/0x1f @ 1
[ 2.245872] initcall init_lstats_procfs+0x0/0x1f returned 0 after 10 usecs
[ 2.252752] calling perf_event_sysfs_init+0x0/0x14 @ 1
[ 2.257993] initcall perf_event_sysfs_init+0x0/0x14 returned 0 after 6 usecs
[ 2.265048] calling init_per_zone_wmark_min+0x0/0x59 @ 1
[ 2.270558] initcall init_per_zone_wmark_min+0x0/0x59 returned 0 after 98 usecs
[ 2.277876] calling kswapd_init+0x0/0x13 @ 1
[ 2.282302] initcall kswapd_init+0x0/0x13 returned 0 after 54 usecs
[ 2.288585] calling setup_vmstat+0x0/0xa8 @ 1
[ 2.293063] initcall setup_vmstat+0x0/0xa8 returned 0 after 16 usecs
[ 2.299424] calling mm_sysfs_init+0x0/0x22 @ 1
[ 2.303970] initcall mm_sysfs_init+0x0/0x22 returned 0 after 4 usecs
[ 2.310335] calling proc_vmalloc_init+0x0/0x1f @ 1
[ 2.315227] initcall proc_vmalloc_init+0x0/0x1f returned 0 after 3 usecs
[ 2.321940] calling init_emergency_pool+0x0/0x57 @ 1
[ 2.327048] highmem bounce pool size: 64 pages
[ 2.331508] initcall init_emergency_pool+0x0/0x57 returned 0 after 4399 usecs
[ 2.338649] calling procswaps_init+0x0/0x1c @ 1
[ 2.343283] initcall procswaps_init+0x0/0x1c returned 0 after 3 usecs
[ 2.349733] calling hugetlb_init+0x0/0x2e2 @ 1
[ 2.354277] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.360649] initcall hugetlb_init+0x0/0x2e2 returned 0 after 6222 usecs
[ 2.367276] calling slab_proc_init+0x0/0x1f @ 1
[ 2.371907] initcall slab_proc_init+0x0/0x1f returned 0 after 3 usecs
[ 2.378361] calling cpucache_init+0x0/0x36 @ 1
[ 2.382907] initcall cpucache_init+0x0/0x36 returned 0 after 4 usecs
[ 2.389273] calling fasync_init+0x0/0x24 @ 1
[ 2.393657] initcall fasync_init+0x0/0x24 returned 0 after 16 usecs
[ 2.399930] calling proc_filesystems_init+0x0/0x1c @ 1
[ 2.405173] initcall proc_filesystems_init+0x0/0x1c returned 0 after 4 usecs
[ 2.412230] calling dnotify_init+0x0/0x6f @ 1
[ 2.416736] initcall dnotify_init+0x0/0x6f returned 0 after 50 usecs
[ 2.423098] calling inotify_setup+0x0/0x11 @ 1
[ 2.427641] initcall inotify_setup+0x0/0x11 returned 0 after 1 usecs
[ 2.434001] calling inotify_user_setup+0x0/0x65 @ 1
[ 2.439015] initcall inotify_user_setup+0x0/0x65 returned 0 after 28 usecs
[ 2.445899] calling aio_setup+0x0/0x8c @ 1
[ 2.450218] initcall aio_setup+0x0/0x8c returned 0 after 118 usecs
[ 2.456406] calling proc_locks_init+0x0/0x1c @ 1
[ 2.461125] initcall proc_locks_init+0x0/0x1c returned 0 after 4 usecs
[ 2.467662] calling init_mbcache+0x0/0x11 @ 1
[ 2.472122] initcall init_mbcache+0x0/0x11 returned 0 after 1 usecs
[ 2.478401] calling dquot_init+0x0/0xf6 @ 1
[ 2.482681] VFS: Disk quotas dquot_6.5.2
[ 2.486650] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.493188] initcall dquot_init+0x0/0xf6 returned 0 after 10259 usecs
[ 2.499635] calling init_v2_quota_format+0x0/0x1d @ 1
[ 2.504809] initcall init_v2_quota_format+0x0/0x1d returned 0 after 23 usecs
[ 2.511864] calling quota_init+0x0/0x20 @ 1
[ 2.516153] initcall quota_init+0x0/0x20 returned 0 after 8 usecs
[ 2.522260] calling proc_cmdline_init+0x0/0x1c @ 1
[ 2.527156] initcall proc_cmdline_init+0x0/0x1c returned 0 after 4 usecs
[ 2.533869] calling proc_cpuinfo_init+0x0/0x1c @ 1
[ 2.538761] initcall proc_cpuinfo_init+0x0/0x1c returned 0 after 3 usecs
[ 2.545475] calling proc_devices_init+0x0/0x1c @ 1
[ 2.550367] initcall proc_devices_init+0x0/0x1c returned 0 after 3 usecs
[ 2.557079] calling proc_interrupts_init+0x0/0x1c @ 1
[ 2.562230] initcall proc_interrupts_init+0x0/0x1c returned 0 after 3 usecs
[ 2.569204] calling proc_loadavg_init+0x0/0x1c @ 1
[ 2.574097] initcall proc_loadavg_init+0x0/0x1c returned 0 after 3 usecs
[ 2.580807] calling proc_meminfo_init+0x0/0x1c @ 1
[ 2.585701] initcall proc_meminfo_init+0x0/0x1c returned 0 after 4 usecs
[ 2.592412] calling proc_stat_init+0x0/0x1c @ 1
[ 2.597045] initcall proc_stat_init+0x0/0x1c returned 0 after 3 usecs
[ 2.603498] calling proc_uptime_init+0x0/0x1c @ 1
[ 2.608303] initcall proc_uptime_init+0x0/0x1c returned 0 after 3 usecs
[ 2.614929] calling proc_version_init+0x0/0x1c @ 1
[ 2.619820] initcall proc_version_init+0x0/0x1c returned 0 after 3 usecs
[ 2.626534] calling proc_softirqs_init+0x0/0x1c @ 1
[ 2.631513] initcall proc_softirqs_init+0x0/0x1c returned 0 after 3 usecs
[ 2.638312] calling proc_kcore_init+0x0/0xa2 @ 1
[ 2.643052] initcall proc_kcore_init+0x0/0xa2 returned 0 after 23 usecs
[ 2.649675] calling proc_kmsg_init+0x0/0x1f @ 1
[ 2.654307] initcall proc_kmsg_init+0x0/0x1f returned 0 after 3 usecs
[ 2.660759] calling proc_page_init+0x0/0x37 @ 1
[ 2.665396] initcall proc_page_init+0x0/0x37 returned 0 after 6 usecs
[ 2.671843] calling init_devpts_fs+0x0/0x3d @ 1
[ 2.676550] initcall init_devpts_fs+0x0/0x3d returned 0 after 75 usecs
[ 2.683086] calling init_ext3_fs+0x0/0x64 @ 1
[ 2.687594] initcall init_ext3_fs+0x0/0x64 returned 0 after 53 usecs
[ 2.693960] calling init_ext2_fs+0x0/0x64 @ 1
[ 2.698448] initcall init_ext2_fs+0x0/0x64 returned 0 after 29 usecs
[ 2.704812] calling journal_init+0x0/0x85 @ 1
[ 2.709322] initcall journal_init+0x0/0x85 returned 0 after 52 usecs
[ 2.715689] calling init_ramfs_fs+0x0/0xf @ 1
[ 2.720147] initcall init_ramfs_fs+0x0/0xf returned 0 after 2 usecs
[ 2.726428] calling init_hugetlbfs_fs+0x0/0x82 @ 1
[ 2.731428] initcall init_hugetlbfs_fs+0x0/0x82 returned 0 after 108 usecs
[ 2.738310] calling init_nls_utf8+0x0/0x1f @ 1
[ 2.742872] initcall init_nls_utf8+0x0/0x1f returned 0 after 19 usecs
[ 2.749324] calling ipc_init+0x0/0x20 @ 1
[ 2.753439] msgmni has been set to 1728
[ 2.757295] initcall ipc_init+0x0/0x20 returned 0 after 3770 usecs
[ 2.763485] calling ipc_sysctl_init+0x0/0x11 @ 1
[ 2.768204] initcall ipc_sysctl_init+0x0/0x11 returned 0 after 2 usecs
[ 2.774744] calling init_mqueue_fs+0x0/0xa3 @ 1
[ 2.779490] initcall init_mqueue_fs+0x0/0xa3 returned 0 after 114 usecs
[ 2.786117] calling crypto_wq_init+0x0/0x2f @ 1
[ 2.790834] initcall crypto_wq_init+0x0/0x2f returned 0 after 88 usecs
[ 2.797374] calling crypto_algapi_init+0x0/0xc @ 1
[ 2.802264] initcall crypto_algapi_init+0x0/0xc returned 0 after 4 usecs
[ 2.808977] calling skcipher_module_init+0x0/0x2c @ 1
[ 2.814126] initcall skcipher_module_init+0x0/0x2c returned 0 after 0 usecs
[ 2.821091] calling chainiv_module_init+0x0/0xf @ 1
[ 2.826078] initcall chainiv_module_init+0x0/0xf returned 0 after 9 usecs
[ 2.832872] calling eseqiv_module_init+0x0/0xf @ 1
[ 2.837761] initcall eseqiv_module_init+0x0/0xf returned 0 after 1 usecs
[ 2.844466] calling hmac_module_init+0x0/0xf @ 1
[ 2.849185] initcall hmac_module_init+0x0/0xf returned 0 after 1 usecs
[ 2.855717] calling md5_mod_init+0x0/0xf @ 1
[ 2.860182] initcall md5_mod_init+0x0/0xf returned 0 after 93 usecs
[ 2.866465] calling sha1_generic_mod_init+0x0/0xf @ 1
[ 2.871691] initcall sha1_generic_mod_init+0x0/0xf returned 0 after 77 usecs
[ 2.878756] calling sha256_generic_mod_init+0x0/0x33 @ 1
[ 2.884314] initcall sha256_generic_mod_init+0x0/0x33 returned 0 after 147 usecs
[ 2.891723] calling sha512_generic_mod_init+0x0/0x33 @ 1
[ 2.897384] initcall sha512_generic_mod_init+0x0/0x33 returned 0 after 242 usecs
[ 2.904789] calling crypto_ecb_module_init+0x0/0xf @ 1
[ 2.910023] initcall crypto_ecb_module_init+0x0/0xf returned 0 after 1 usecs
[ 2.917076] calling crypto_cbc_module_init+0x0/0xf @ 1
[ 2.922313] initcall crypto_cbc_module_init+0x0/0xf returned 0 after 1 usecs
[ 2.929364] calling des_generic_mod_init+0x0/0x33 @ 1
[ 2.934664] initcall des_generic_mod_init+0x0/0x33 returned 0 after 146 usecs
[ 2.941809] calling aes_init+0x0/0xf @ 1
[ 2.945926] initcall aes_init+0x0/0xf returned 0 after 85 usecs
[ 2.951860] calling arc4_init+0x0/0xf @ 1
[ 2.956067] initcall arc4_init+0x0/0xf returned 0 after 99 usecs
[ 2.962089] calling deflate_mod_init+0x0/0xf @ 1
[ 2.967307] initcall deflate_mod_init+0x0/0xf returned 0 after 484 usecs
[ 2.974019] calling crypto_authenc_module_init+0x0/0xf @ 1
[ 2.979601] initcall crypto_authenc_module_init+0x0/0xf returned 0 after 1 usecs
[ 2.986999] calling krng_mod_init+0x0/0xf @ 1
[ 2.991506] alg: No test for stdrng (krng)
[ 2.995633] initcall krng_mod_init+0x0/0xf returned 0 after 4076 usecs
[ 3.002172] calling proc_genhd_init+0x0/0x31 @ 1
[ 3.006906] initcall proc_genhd_init+0x0/0x31 returned 0 after 12 usecs
[ 3.013532] calling noop_init+0x0/0x11 @ 1
[ 3.017760] io scheduler noop registered
[ 3.021695] initcall noop_init+0x0/0x11 returned 0 after 3875 usecs
[ 3.027970] calling deadline_init+0x0/0x11 @ 1
[ 3.032510] io scheduler deadline registered
[ 3.036793] initcall deadline_init+0x0/0x11 returned 0 after 4181 usecs
[ 3.043415] calling cfq_init+0x0/0x89 @ 1
[ 3.047562] io scheduler cfq registered (default)
[ 3.052281] initcall cfq_init+0x0/0x89 returned 0 after 4645 usecs
[ 3.058468] calling percpu_counter_startup+0x0/0x29 @ 1
[ 3.063791] initcall percpu_counter_startup+0x0/0x29 returned 0 after 0 usecs
[ 3.070930] calling pci_proc_init+0x0/0x5b @ 1
[ 3.075581] initcall pci_proc_init+0x0/0x5b returned 0 after 105 usecs
[ 3.082119] calling pcie_portdrv_init+0x0/0x4b @ 1
[ 3.087299] initcall pcie_portdrv_init+0x0/0x4b returned 0 after 280 usecs
[ 3.094188] calling aer_service_init+0x0/0x28 @ 1
[ 3.099071] initcall aer_service_init+0x0/0x28 returned 0 after 73 usecs
[ 3.105786] calling ioapic_init+0x0/0x16 @ 1
[ 3.110252] initcall ioapic_init+0x0/0x16 returned 0 after 91 usecs
[ 3.116530] calling acpi_reserve_resources+0x0/0xc8 @ 1
[ 3.121865] initcall acpi_reserve_resources+0x0/0xc8 returned 0 after 6 usecs
[ 3.129007] calling irqrouter_init_sysfs+0x0/0x33 @ 1
[ 3.134296] initcall irqrouter_init_sysfs+0x0/0x33 returned 0 after 135 usecs
[ 3.141449] calling acpi_ac_init+0x0/0x25 @ 1
[ 3.146025] initcall acpi_ac_init+0x0/0x25 returned 0 after 114 usecs
[ 3.152478] calling acpi_button_init+0x0/0x4a @ 1
[ 3.157531] input: Power Button as /class/input/input0
[ 3.162737] ACPI: Power Button [PWRB]
[ 3.166601] input: Power Button as /class/input/input1
[ 3.171758] ACPI: Power Button [PWRF]
[ 3.175528] initcall acpi_button_init+0x0/0x4a returned 0 after 17820 usecs
[ 3.182504] calling acpi_fan_init+0x0/0x15 @ 1
[ 3.187147] initcall acpi_fan_init+0x0/0x15 returned 0 after 93 usecs
[ 3.193603] calling acpi_pci_slot_init+0x0/0x1b @ 1
[ 3.199075] initcall acpi_pci_slot_init+0x0/0x1b returned 0 after 478 usecs
[ 3.206047] calling acpi_processor_init+0x0/0x81 @ 1
[ 3.211132] ACPI: acpi_idle registered with cpuidle
[ 3.211770] initcall acpi_processor_init+0x0/0x81 returned 0 after 645 usecs
[ 3.218833] calling acpi_thermal_init+0x0/0x6f @ 1
[ 3.223849] initcall acpi_thermal_init+0x0/0x6f returned 0 after 117 usecs
[ 3.230741] calling rand_initialize+0x0/0x25 @ 1
[ 3.235514] initcall rand_initialize+0x0/0x25 returned 0 after 50 usecs
[ 3.242135] calling pty_init+0x0/0x40d @ 1
[ 3.299967] initcall pty_init+0x0/0x40d returned 0 after 52375 usecs
[ 3.306386] calling sysrq_init+0x0/0x6d @ 1
[ 3.310688] initcall sysrq_init+0x0/0x6d returned 0 after 14 usecs
[ 3.316879] calling n_hdlc_init+0x0/0x81 @ 1
[ 3.321245] HDLC line discipline maxframe=4096
[ 3.325699] N_HDLC line discipline registered.
[ 3.330154] initcall n_hdlc_init+0x0/0x81 returned 0 after 8698 usecs
[ 3.336603] calling rtc_init+0x0/0xf8 @ 1
[ 3.340824] Real Time Clock Driver v1.12b
[ 3.344877] initcall rtc_init+0x0/0xf8 returned 0 after 4068 usecs
[ 3.351067] calling hpet_init+0x0/0x57 @ 1
[ 3.355669] initcall hpet_init+0x0/0x57 returned 0 after 396 usecs
[ 3.361870] calling nvram_init+0x0/0x70 @ 1
[ 3.366296] Non-volatile memory driver v1.3
[ 3.370495] initcall nvram_init+0x0/0x70 returned 0 after 4236 usecs
[ 3.376860] calling agp_init+0x0/0x21 @ 1
[ 3.380966] Linux agpgart interface v0.103
[ 3.385076] initcall agp_init+0x0/0x21 returned 0 after 4012 usecs
[ 3.391264] calling agp_amd64_mod_init+0x0/0xa @ 1
[ 3.396611] initcall agp_amd64_mod_init+0x0/0xa returned -19 after 448 usecs
[ 3.403666] calling hangcheck_init+0x0/0x99 @ 1
[ 3.408295] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 3.417261] Hangcheck: Using getrawmonotonic().
[ 3.421812] initcall hangcheck_init+0x0/0x99 returned 0 after 13198 usecs
[ 3.428609] calling serial8250_init+0x0/0x14d @ 1
[ 3.433410] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 3.439958] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.446372] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.452609] initcall serial8250_init+0x0/0x14d returned 0 after 18747 usecs
[ 3.459587] calling serial8250_pnp_init+0x0/0xf @ 1
[ 3.465449] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.471629] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.477463] initcall serial8250_pnp_init+0x0/0xf returned 0 after 12588 usecs
[ 3.484609] calling serial8250_pci_init+0x0/0x16 @ 1
[ 3.489791] initcall serial8250_pci_init+0x0/0x16 returned 0 after 112 usecs
[ 3.496863] calling topology_sysfs_init+0x0/0x47 @ 1
[ 3.501951] initcall topology_sysfs_init+0x0/0x47 returned 0 after 18 usecs
[ 3.508924] calling loop_init+0x0/0x16c @ 1
[ 3.515032] loop: module loaded
[ 3.518215] initcall loop_init+0x0/0x16c returned 0 after 4891 usecs
[ 3.524577] calling net_olddevs_init+0x0/0x82 @ 1
[ 3.529385] initcall net_olddevs_init+0x0/0x82 returned 0 after 5 usecs
[ 3.536008] calling tun_init+0x0/0x79 @ 1
[ 3.540117] tun: Universal TUN/TAP device driver, 1.6
[ 3.545175] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.551502] initcall tun_init+0x0/0x79 returned 0 after 11117 usecs
[ 3.557807] calling rtl8169_init_module+0x0/0x16 @ 1
[ 3.562892] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.568546] r8169 0000:02:0f.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.575466] r8169 0000:02:0f.0: (unregistered net_device): no PCI Express capability
[ 3.583581] r8169 0000:02:0f.0: eth0: RTL8169sc/8110sc at 0xf848c000, 00:1f:d0:5b:61:a9, XID 18000000 IRQ 23
[ 3.598366] initcall rtl8169_init_module+0x0/0x16 returned 0 after 34666 usecs
[ 3.605602] calling spi_transport_init+0x0/0x65 @ 1
[ 3.610746] initcall spi_transport_init+0x0/0x65 returned 0 after 163 usecs
[ 3.617722] calling init_sd+0x0/0x125 @ 1
[ 3.622029] initcall init_sd+0x0/0x125 returned 0 after 184 usecs
[ 3.628141] calling init_sg+0x0/0xaf @ 1
[ 3.632285] initcall init_sg+0x0/0xaf returned 0 after 113 usecs
[ 3.638303] calling ahci_init+0x0/0x16 @ 1
[ 3.642536] ahci 0000:00:12.0: version 3.0
[ 3.642562] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.649387] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 3.656576] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 3.664678] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 3.672063] scsi0 : ahci
[ 3.675033] scsi1 : ahci
[ 3.677812] scsi2 : ahci
[ 3.680544] scsi3 : ahci
[ 3.683534] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 3.690937] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 3.698337] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 3.705897] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 3.713409] calling 1_async_port_probe+0x0/0x9d @ 1023
[ 3.713512] initcall ahci_init+0x0/0x16 returned 0 after 69345 usecs
[ 3.713516] calling atiixp_init+0x0/0x16 @ 1
[ 3.713567] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.713753] scsi4 : pata_atiixp
[ 3.713890] scsi5 : pata_atiixp
[ 3.715869] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 3.715871] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 3.715961] initcall atiixp_init+0x0/0x16 returned 0 after 2382 usecs
[ 3.715964] calling ohci1394_init+0x0/0x16 @ 1
[ 3.716050] initcall ohci1394_init+0x0/0x16 returned 0 after 79 usecs
[ 3.716054] calling ohci_hcd_mod_init+0x0/0x75 @ 1
[ 3.716057] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.716060] ohci_hcd: block sizes: ed 64 td 64
[ 3.716083] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.716110] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.716512] drivers/usb/core/inode.c: creating file 'devices'
[ 3.716591] drivers/usb/core/inode.c: creating file '001'
[ 3.716621] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 3.716640] ohci_hcd 0000:00:13.0: created debug files
[ 3.716642] ohci_hcd 0000:00:13.0: supports USB remote wakeup
[ 3.716680] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 3.718304] calling 2_async_port_probe+0x0/0x9d @ 1024
[ 3.718494] calling 3_async_port_probe+0x0/0x9d @ 1032
[ 3.718552] calling 4_async_port_probe+0x0/0x9d @ 1033
[ 3.718588] calling 5_async_port_probe+0x0/0x9d @ 1034
[ 3.718802] calling 6_async_port_probe+0x0/0x9d @ 1035
[ 3.771334] ohci_hcd 0000:00:13.0: OHCI controller state
[ 3.771340] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
[ 3.771346] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3
[ 3.771351] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
[ 3.771355] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
[ 3.771361] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 3.771381] ohci_hcd 0000:00:13.0: hcca frame #0005
[ 3.771385] ohci_hcd 0000:00:13.0: roothub.a 02000202 POTPGT=2 NPS NDP=2(2)
[ 3.771390] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 3.771396] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
[ 3.771403] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00010101 CSC PPS CCS
[ 3.771408] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00010301 CSC LSDA PPS CCS
[ 3.771561] usb usb1: default language 0x0409
[ 3.771577] usb usb1: udev 1, busnum 1, minor = 0
[ 3.771579] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.771582] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.771585] usb usb1: Product: OHCI Host Controller
[ 3.771587] usb usb1: Manufacturer: Linux 2.6.35.4-git+ ohci_hcd
[ 3.771589] usb usb1: SerialNumber: 0000:00:13.0
[ 3.771976] usb usb1: usb_probe_device
[ 3.771979] usb usb1: configuration #1 chosen from 1 choice
[ 3.772124] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 3.772323] hub 1-0:1.0: usb_probe_interface
[ 3.772326] hub 1-0:1.0: usb_probe_interface - got id
[ 3.772328] hub 1-0:1.0: USB hub found
[ 3.772378] hub 1-0:1.0: 2 ports detected
[ 3.772381] hub 1-0:1.0: standalone hub
[ 3.772383] hub 1-0:1.0: no power switching (usb 1.0)
[ 3.772385] hub 1-0:1.0: global over-current protection
[ 3.772387] hub 1-0:1.0: power on to power good time: 4ms
[ 3.772496] hub 1-0:1.0: local power source is good
[ 3.772498] hub 1-0:1.0: no over-current condition exists
[ 3.772501] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 3.772883] drivers/usb/core/inode.c: creating file '001'
[ 3.773008] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.773034] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 3.773045] drivers/usb/core/inode.c: creating file '002'
[ 3.773055] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 3.773074] ohci_hcd 0000:00:13.1: created debug files
[ 3.773076] ohci_hcd 0000:00:13.1: supports USB remote wakeup
[ 3.773115] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 3.827296] ohci_hcd 0000:00:13.1: OHCI controller state
[ 3.827302] ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
[ 3.827308] ohci_hcd 0000:00:13.1: control 0x283 RWC HCFS=operational CBSR=3
[ 3.827313] ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
[ 3.827318] ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
[ 3.827323] ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 3.827342] ohci_hcd 0000:00:13.1: hcca frame #0005
[ 3.827347] ohci_hcd 0000:00:13.1: roothub.a 02000202 POTPGT=2 NPS NDP=2(2)
[ 3.827352] ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 3.827356] ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
[ 3.827360] ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00010101 CSC PPS CCS
[ 3.827366] ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00010301 CSC LSDA PPS CCS
[ 3.827390] usb usb2: default language 0x0409
[ 3.827405] usb usb2: udev 1, busnum 2, minor = 128
[ 3.827407] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.827410] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.827412] usb usb2: Product: OHCI Host Controller
[ 3.827414] usb usb2: Manufacturer: Linux 2.6.35.4-git+ ohci_hcd
[ 3.827417] usb usb2: SerialNumber: 0000:00:13.1
[ 3.827590] usb usb2: usb_probe_device
[ 3.827593] usb usb2: configuration #1 chosen from 1 choice
[ 3.827606] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 3.827711] hub 2-0:1.0: usb_probe_interface
[ 3.827713] hub 2-0:1.0: usb_probe_interface - got id
[ 3.827716] hub 2-0:1.0: USB hub found
[ 3.827729] hub 2-0:1.0: 2 ports detected
[ 3.827732] hub 2-0:1.0: standalone hub
[ 3.827733] hub 2-0:1.0: no power switching (usb 1.0)
[ 3.827735] hub 2-0:1.0: global over-current protection
[ 3.827738] hub 2-0:1.0: power on to power good time: 4ms
[ 3.827752] hub 2-0:1.0: local power source is good
[ 3.827754] hub 2-0:1.0: no over-current condition exists
[ 3.827756] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 3.827874] drivers/usb/core/inode.c: creating file '001'
[ 3.827949] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.827967] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 3.827977] drivers/usb/core/inode.c: creating file '003'
[ 3.827986] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 3.828005] ohci_hcd 0000:00:13.2: created debug files
[ 3.828007] ohci_hcd 0000:00:13.2: supports USB remote wakeup
[ 3.828046] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 3.881543] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
[ 3.881550] hub 1-0:1.0: port 1: status 0101 change 0001
[ 3.881643] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
[ 3.881648] hub 1-0:1.0: port 2: status 0301 change 0001
[ 3.881664] async_waiting @ 1035
[ 3.885704] ohci_hcd 0000:00:13.2: OHCI controller state
[ 3.885708] ohci_hcd 0000:00:13.2: OHCI 1.0, NO legacy support registers
[ 3.885712] ohci_hcd 0000:00:13.2: control 0x283 RWC HCFS=operational CBSR=3
[ 3.885718] ohci_hcd 0000:00:13.2: cmdstatus 0x00000 SOC=0
[ 3.885722] ohci_hcd 0000:00:13.2: intrstatus 0x00000004 SF
[ 3.885728] ohci_hcd 0000:00:13.2: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 3.885748] ohci_hcd 0000:00:13.2: hcca frame #0005
[ 3.885752] ohci_hcd 0000:00:13.2: roothub.a 02000202 POTPGT=2 NPS NDP=2(2)
[ 3.885757] ohci_hcd 0000:00:13.2: roothub.b 00000000 PPCM=0000 DR=0000
[ 3.885761] ohci_hcd 0000:00:13.2: roothub.status 00008000 DRWE
[ 3.885767] ohci_hcd 0000:00:13.2: roothub.portstatus [0] 0x00010101 CSC PPS CCS
[ 3.885773] ohci_hcd 0000:00:13.2: roothub.portstatus [1] 0x00010101 CSC PPS CCS
[ 3.885794] usb usb3: default language 0x0409
[ 3.885809] usb usb3: udev 1, busnum 3, minor = 256
[ 3.885811] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.885814] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.885816] usb usb3: Product: OHCI Host Controller
[ 3.885818] usb usb3: Manufacturer: Linux 2.6.35.4-git+ ohci_hcd
[ 3.885821] usb usb3: SerialNumber: 0000:00:13.2
[ 3.886007] usb usb3: usb_probe_device
[ 3.886010] usb usb3: configuration #1 chosen from 1 choice
[ 3.886023] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 3.886141] hub 3-0:1.0: usb_probe_interface
[ 3.886144] hub 3-0:1.0: usb_probe_interface - got id
[ 3.886146] hub 3-0:1.0: USB hub found
[ 3.886160] hub 3-0:1.0: 2 ports detected
[ 3.886162] hub 3-0:1.0: standalone hub
[ 3.886164] hub 3-0:1.0: no power switching (usb 1.0)
[ 3.886166] hub 3-0:1.0: global over-current protection
[ 3.886169] hub 3-0:1.0: power on to power good time: 4ms
[ 3.886182] hub 3-0:1.0: local power source is good
[ 3.886184] hub 3-0:1.0: no over-current condition exists
[ 3.886187] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 3.886328] drivers/usb/core/inode.c: creating file '001'
[ 3.886401] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.886423] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 3.886434] drivers/usb/core/inode.c: creating file '004'
[ 3.886443] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
[ 3.886461] ohci_hcd 0000:00:13.3: created debug files
[ 3.886463] ohci_hcd 0000:00:13.3: supports USB remote wakeup
[ 3.886472] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 3.896272] async_waiting @ 1034
[ 3.927286] ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
[ 3.927292] hub 2-0:1.0: port 1: status 0101 change 0001
[ 3.927328] ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
[ 3.927333] hub 2-0:1.0: port 2: status 0301 change 0001
[ 3.941296] ohci_hcd 0000:00:13.3: OHCI controller state
[ 3.941300] ohci_hcd 0000:00:13.3: OHCI 1.0, NO legacy support registers
[ 3.941307] ohci_hcd 0000:00:13.3: control 0x283 RWC HCFS=operational CBSR=3
[ 3.941312] ohci_hcd 0000:00:13.3: cmdstatus 0x00000 SOC=0
[ 3.941316] ohci_hcd 0000:00:13.3: intrstatus 0x00000004 SF
[ 3.941322] ohci_hcd 0000:00:13.3: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 3.941342] ohci_hcd 0000:00:13.3: hcca frame #0005
[ 3.941346] ohci_hcd 0000:00:13.3: roothub.a 02000202 POTPGT=2 NPS NDP=2(2)
[ 3.941351] ohci_hcd 0000:00:13.3: roothub.b 00000000 PPCM=0000 DR=0000
[ 3.941356] ohci_hcd 0000:00:13.3: roothub.status 00008000 DRWE
[ 3.941362] ohci_hcd 0000:00:13.3: roothub.portstatus [0] 0x00010101 CSC PPS CCS
[ 3.941367] ohci_hcd 0000:00:13.3: roothub.portstatus [1] 0x00010101 CSC PPS CCS
[ 3.941388] usb usb4: default language 0x0409
[ 3.941403] usb usb4: udev 1, busnum 4, minor = 384
[ 3.941405] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.941408] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.941411] usb usb4: Product: OHCI Host Controller
[ 3.941413] usb usb4: Manufacturer: Linux 2.6.35.4-git+ ohci_hcd
[ 3.941415] usb usb4: SerialNumber: 0000:00:13.3
[ 3.941600] usb usb4: usb_probe_device
[ 3.941603] usb usb4: configuration #1 chosen from 1 choice
[ 3.941616] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 3.941718] hub 4-0:1.0: usb_probe_interface
[ 3.941720] hub 4-0:1.0: usb_probe_interface - got id
[ 3.941722] hub 4-0:1.0: USB hub found
[ 3.941741] hub 4-0:1.0: 2 ports detected
[ 3.941743] hub 4-0:1.0: standalone hub
[ 3.941745] hub 4-0:1.0: no power switching (usb 1.0)
[ 3.941747] hub 4-0:1.0: global over-current protection
[ 3.941749] hub 4-0:1.0: power on to power good time: 4ms
[ 3.941763] hub 4-0:1.0: local power source is good
[ 3.941765] hub 4-0:1.0: no over-current condition exists
[ 3.941768] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 3.941888] drivers/usb/core/inode.c: creating file '001'
[ 3.941958] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.941976] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 3.941987] drivers/usb/core/inode.c: creating file '005'
[ 3.942008] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
[ 3.942025] ohci_hcd 0000:00:13.4: created debug files
[ 3.942027] ohci_hcd 0000:00:13.4: supports USB remote wakeup
[ 3.942036] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 3.981317] hub 1-0:1.0: state 7 ports 2 chg 0006 evt 0000
[ 3.981337] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 3.985294] ohci_hcd 0000:00:13.2: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
[ 3.985299] hub 3-0:1.0: port 1: status 0101 change 0001
[ 3.985334] ohci_hcd 0000:00:13.2: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
[ 3.985340] hub 3-0:1.0: port 2: status 0101 change 0001
[ 3.996296] ohci_hcd 0000:00:13.4: OHCI controller state
[ 3.996300] ohci_hcd 0000:00:13.4: OHCI 1.0, NO legacy support registers
[ 3.996306] ohci_hcd 0000:00:13.4: control 0x283 RWC HCFS=operational CBSR=3
[ 3.996311] ohci_hcd 0000:00:13.4: cmdstatus 0x00000 SOC=0
[ 3.996316] ohci_hcd 0000:00:13.4: intrstatus 0x00000004 SF
[ 3.996321] ohci_hcd 0000:00:13.4: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 3.996342] ohci_hcd 0000:00:13.4: hcca frame #0005
[ 3.996347] ohci_hcd 0000:00:13.4: roothub.a 02000202 POTPGT=2 NPS NDP=2(2)
[ 3.996352] ohci_hcd 0000:00:13.4: roothub.b 00000000 PPCM=0000 DR=0000
[ 3.996356] ohci_hcd 0000:00:13.4: roothub.status 00008000 DRWE
[ 3.996363] ohci_hcd 0000:00:13.4: roothub.portstatus [0] 0x00010101 CSC PPS CCS
[ 3.996368] ohci_hcd 0000:00:13.4: roothub.portstatus [1] 0x00010101 CSC PPS CCS
[ 3.996389] usb usb5: default language 0x0409
[ 3.996404] usb usb5: udev 1, busnum 5, minor = 512
[ 3.996407] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.996410] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.996412] usb usb5: Product: OHCI Host Controller
[ 3.996414] usb usb5: Manufacturer: Linux 2.6.35.4-git+ ohci_hcd
[ 3.996417] usb usb5: SerialNumber: 0000:00:13.4
[ 3.996654] usb usb5: usb_probe_device
[ 3.996657] usb usb5: configuration #1 chosen from 1 choice
[ 3.996670] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 3.996769] hub 5-0:1.0: usb_probe_interface
[ 3.996772] hub 5-0:1.0: usb_probe_interface - got id
[ 3.996774] hub 5-0:1.0: USB hub found
[ 3.996788] hub 5-0:1.0: 2 ports detected
[ 3.996790] hub 5-0:1.0: standalone hub
[ 3.996792] hub 5-0:1.0: no power switching (usb 1.0)
[ 3.996794] hub 5-0:1.0: global over-current protection
[ 3.996797] hub 5-0:1.0: power on to power good time: 4ms
[ 3.996810] hub 5-0:1.0: local power source is good
[ 3.996812] hub 5-0:1.0: no over-current condition exists
[ 3.996815] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 3.996934] drivers/usb/core/inode.c: creating file '001'
[ 3.997075] initcall ohci_hcd_mod_init+0x0/0x75 returned 0 after 274427 usecs
[ 3.997078] calling usb_stor_init+0x0/0x38 @ 1
[ 3.997081] Initializing USB Mass Storage driver...
[ 3.997177] usbcore: registered new interface driver usb-storage
[ 3.997179] USB Mass Storage support registered.
[ 3.997184] initcall usb_stor_init+0x0/0x38 returned 0 after 98 usecs
[ 3.997187] calling i8042_init+0x0/0x334 @ 1
[ 3.997587] PNP: No PS/2 controller found. Probing ports directly.
[ 3.998361] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.998394] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.998464] initcall i8042_init+0x0/0x334 returned 0 after 1241 usecs
[ 3.998467] calling evdev_init+0x0/0xf @ 1
[ 3.998838] initcall evdev_init+0x0/0xf returned 0 after 357 usecs
[ 3.998841] calling atkbd_init+0x0/0x20 @ 1
[ 3.998925] initcall atkbd_init+0x0/0x20 returned 0 after 77 usecs
[ 3.998928] calling i2c_dev_init+0x0/0x9c @ 1
[ 3.998932] i2c /dev entries driver
[ 3.999066] initcall i2c_dev_init+0x0/0x9c returned 0 after 129 usecs
[ 3.999070] calling sm_it87_init+0x0/0x36c @ 1
[ 3.999132] it87: Found IT8716F chip at 0x228, revision 3
[ 3.999158] it87: in3 is VCC (+5V)
[ 3.999160] it87: in7 is VCCH (+5V Stand-By)
[ 3.999167] it87: Beeping is supported
[ 3.999977] initcall sm_it87_init+0x0/0x36c returned 0 after 880 usecs
[ 3.999980] calling raid_init+0x0/0xf @ 1
[ 4.000014] md: raid1 personality registered for level 1
[ 4.000020] initcall raid_init+0x0/0xf returned 0 after 34 usecs
[ 4.000023] calling dm_init+0x0/0x38 @ 1
[ 4.274390] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.274433] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 4.279857] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
[ 4.279865] hub 4-0:1.0: port 1: status 0101 change 0001
[ 4.279896] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
[ 4.279902] hub 4-0:1.0: port 2: status 0101 change 0001
[ 4.279917] ohci_hcd 0000:00:13.4: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
[ 4.279923] hub 5-0:1.0: port 1: status 0101 change 0001
[ 4.279953] ohci_hcd 0000:00:13.4: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
[ 4.279958] hub 5-0:1.0: port 2: status 0101 change 0001
[ 4.279990] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 4.288444] initcall dm_init+0x0/0x38 returned 0 after 281653 usecs
[ 4.290274] async_waiting @ 1032
[ 4.297955] calling dm_crypt_init+0x0/0x5a @ 1
[ 4.302516] initcall dm_crypt_init+0x0/0x5a returned 0 after 19 usecs
[ 4.308962] calling cpufreq_stats_init+0x0/0x84 @ 1
[ 4.313968] initcall cpufreq_stats_init+0x0/0x84 returned 0 after 31 usecs
[ 4.320853] calling cpufreq_gov_powersave_init+0x0/0xf @ 1
[ 4.326441] initcall cpufreq_gov_powersave_init+0x0/0xf returned 0 after 2 usecs
[ 4.326459] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 4.340803] calling cpufreq_gov_userspace_init+0x0/0xf @ 1
[ 4.346386] initcall cpufreq_gov_userspace_init+0x0/0xf returned 0 after 1 usecs
[ 4.353785] calling cpufreq_gov_dbs_init+0x0/0xd1 @ 1
[ 4.359380] initcall cpufreq_gov_dbs_init+0x0/0xd1 returned 0 after 433 usecs
[ 4.366537] calling init_ladder+0x0/0xf @ 1
[ 4.370849] cpuidle: using governor ladder
[ 4.374962] initcall init_ladder+0x0/0xf returned 0 after 4044 usecs
[ 4.381327] calling init_menu+0x0/0xf @ 1
[ 4.385439] cpuidle: using governor menu
[ 4.389377] initcall init_menu+0x0/0xf returned 0 after 3845 usecs
[ 4.389389] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 4.395572] calling hid_init+0x0/0x51 @ 1
[ 4.399849] initcall hid_init+0x0/0x51 returned 0 after 166 usecs
[ 4.405980] calling hid_init+0x0/0xb0 @ 1
[ 4.410326] usbcore: registered new interface driver hiddev
[ 4.415998] usbcore: registered new interface driver usbhid
[ 4.421580] usbhid: USB HID core driver
[ 4.425428] initcall hid_init+0x0/0xb0 returned 0 after 14980 usecs
[ 4.431706] calling alsa_timer_init+0x0/0x134 @ 1
[ 4.436881] initcall alsa_timer_init+0x0/0x134 returned 0 after 358 usecs
[ 4.437277] ata4: softreset failed (device not ready)
[ 4.437282] ata4: applying SB600 PMP SRST workaround and retrying
[ 4.454835] calling rtctimer_init+0x0/0xf3 @ 1
[ 4.455290] ata2: softreset failed (device not ready)
[ 4.455295] ata2: applying SB600 PMP SRST workaround and retrying
[ 4.470533] initcall rtctimer_init+0x0/0xf3 returned 0 after 3 usecs
[ 4.476900] calling alsa_pcm_init+0x0/0x4d @ 1
[ 4.481476] initcall alsa_pcm_init+0x0/0x4d returned 0 after 32 usecs
[ 4.487924] calling snd_mem_init+0x0/0x24 @ 1
[ 4.489363] usb 1-1: default language 0x0409
[ 4.491363] usb 1-1: udev 2, busnum 1, minor = 1
[ 4.491366] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 4.491369] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.491371] usb 1-1: Product: USB2.0 Hub
[ 4.491579] usb 1-1: usb_probe_device
[ 4.491583] usb 1-1: configuration #1 chosen from 1 choice
[ 4.493385] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 4.493485] hub 1-1:1.0: usb_probe_interface
[ 4.493488] hub 1-1:1.0: usb_probe_interface - got id
[ 4.493490] hub 1-1:1.0: USB hub found
[ 4.495366] hub 1-1:1.0: 4 ports detected
[ 4.495368] hub 1-1:1.0: standalone hub
[ 4.495370] hub 1-1:1.0: ganged power switching
[ 4.495372] hub 1-1:1.0: global over-current protection
[ 4.495375] hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns)
[ 4.495377] hub 1-1:1.0: Port indicators are supported
[ 4.495380] hub 1-1:1.0: power on to power good time: 100ms
[ 4.499383] hub 1-1:1.0: local power source is good
[ 4.499385] hub 1-1:1.0: no over-current condition exists
[ 4.499388] hub 1-1:1.0: enabling power on all ports
[ 4.507500] drivers/usb/core/inode.c: creating file '002'
[ 4.507546] hub 1-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
[ 4.517905] initcall snd_mem_init+0x0/0x24 returned 0 after 8 usecs
[ 4.524185] calling alsa_mixer_oss_init+0x0/0x2d @ 1
[ 4.529249] initcall alsa_mixer_oss_init+0x0/0x2d returned 0 after 0 usecs
[ 4.536135] calling alsa_pcm_oss_init+0x0/0x72 @ 1
[ 4.541055] initcall alsa_pcm_oss_init+0x0/0x72 returned 0 after 28 usecs
[ 4.547855] calling patch_realtek_init+0x0/0xf @ 1
[ 4.552768] initcall patch_realtek_init+0x0/0xf returned 0 after 23 usecs
[ 4.559563] calling patch_cirrus_init+0x0/0xf @ 1
[ 4.564367] initcall patch_cirrus_init+0x0/0xf returned 0 after 1 usecs
[ 4.570994] calling patch_ca0110_init+0x0/0xf @ 1
[ 4.571284] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 4.575799] initcall patch_ca0110_init+0x0/0xf returned 0 after 1 usecs
[ 4.582425] calling alsa_card_azx_init+0x0/0x16 @ 1
[ 4.587512] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.594811] HDA Intel 0000:00:14.2: irq 40 for MSI/MSI-X
[ 4.595361] hub 1-1:1.0: port 4: status 0101 change 0001
[ 4.605285] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.609767] initcall alsa_card_azx_init+0x0/0x16 returned 0 after 21837 usecs
[ 4.609772] calling alsa_sound_last_init+0x0/0x50 @ 1
[ 4.609775] ALSA device list:
[ 4.609777] #0: HDA ATI SB at 0xfe024000 irq 40
[ 4.609782] initcall alsa_sound_last_init+0x0/0x50 returned 0 after 5 usecs
[ 4.609786] calling flow_cache_init_global+0x0/0x13a @ 1
[ 4.643779] initcall flow_cache_init_global+0x0/0x13a returned 0 after 33190 usecs
[ 4.643808] ata1: SATA link down (SStatus 0 SControl 300)
[ 4.643860] usb 1-2: new low speed USB device using ohci_hcd and address 3
[ 4.643875] async_waiting @ 1023
[ 4.643881] async_continuing @ 1023 after 2 usec
[ 4.643887] initcall 1_async_port_probe+0x0/0x9d returned 0 after 360743 usecs
[ 4.643985] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.644968] ata2.00: HPA detected: current 976771055, native 976773168
[ 4.645069] ata2.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[ 4.645072] ata2.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.645091] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.646272] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.646275] ata2.00: configured for UDMA/133
[ 4.646288] async_waiting @ 1024
[ 4.646295] async_continuing @ 1024 after 2 usec
[ 4.646891] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5
[ 4.647576] calling 7_sd_probe_async+0x0/0x1b6 @ 1023
[ 4.647655] sd 1:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 4.647748] sd 1:0:0:0: [sda] Write Protect is off
[ 4.647751] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.647790] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.651352] ata4.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[ 4.651355] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.651374] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.652508] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.652511] ata4.00: configured for UDMA/133
[ 4.794187] calling llc_init+0x0/0x1b @ 1
[ 4.798302] initcall llc_init+0x0/0x1b returned 0 after 2 usecs
[ 4.804233] calling snap_init+0x0/0x31 @ 1
[ 4.808459] initcall snap_init+0x0/0x31 returned 0 after 30 usecs
[ 4.814564] calling blackhole_module_init+0x0/0xf @ 1
[ 4.819717] initcall blackhole_module_init+0x0/0xf returned 0 after 2 usecs
[ 4.826690] calling sysctl_ipv4_init+0x0/0x71 @ 1
[ 4.831506] initcall sysctl_ipv4_init+0x0/0x71 returned 0 after 14 usecs
[ 4.838216] calling ipip_init+0x0/0x50 @ 1
[ 4.842412] IPv4 over IPv4 tunneling driver
[ 4.846768] async_waiting @ 1033
[ 4.847031] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 4.847157] sda:
[ 4.847920] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 4.847941] initcall 2_async_port_probe+0x0/0x9d returned 0 after 1103153 usecs
[ 4.847954] async_continuing @ 1032 after 544606 usec
[ 4.847958] initcall 3_async_port_probe+0x0/0x9d returned 0 after 1102988 usecs
[ 4.848148] initcall ipip_init+0x0/0x50 returned 0 after 5599 usecs
[ 4.848152] calling ipgre_init+0x0/0x8b @ 1
[ 4.848155] GRE over IPv4 tunneling driver
[ 4.848399] initcall ipgre_init+0x0/0x8b returned 0 after 236 usecs
[ 4.848402] calling init_syncookies+0x0/0x16 @ 1
[ 4.848446] initcall init_syncookies+0x0/0x16 returned 0 after 39 usecs
[ 4.848449] calling ah4_init+0x0/0x5a @ 1
[ 4.848457] initcall ah4_init+0x0/0x5a returned 0 after 2 usecs
[ 4.848460] calling esp4_init+0x0/0x5a @ 1
[ 4.848468] initcall esp4_init+0x0/0x5a returned 0 after 2 usecs
[ 4.848471] calling ipcomp4_init+0x0/0x5a @ 1
[ 4.848479] initcall ipcomp4_init+0x0/0x5a returned 0 after 2 usecs
[ 4.848482] calling ipip_init+0x0/0x88 @ 1
[ 4.848490] initcall ipip_init+0x0/0x88 returned 0 after 2 usecs
[ 4.848493] calling xfrm4_beet_init+0x0/0x14 @ 1
[ 4.848501] initcall xfrm4_beet_init+0x0/0x14 returned 0 after 2 usecs
[ 4.848504] calling tunnel4_init+0x0/0x5a @ 1
[ 4.848512] initcall tunnel4_init+0x0/0x5a returned 0 after 2 usecs
[ 4.848515] calling xfrm4_transport_init+0x0/0x14 @ 1
[ 4.848523] initcall xfrm4_transport_init+0x0/0x14 returned 0 after 2 usecs
[ 4.848526] calling xfrm4_mode_tunnel_init+0x0/0x14 @ 1
[ 4.848534] initcall xfrm4_mode_tunnel_init+0x0/0x14 returned 0 after 2 usecs
[ 4.848539] calling ipv4_netfilter_init+0x0/0xf @ 1
[ 4.848574] initcall ipv4_netfilter_init+0x0/0xf returned 0 after 30 usecs
[ 4.848577] calling inet_diag_init+0x0/0x5d @ 1
[ 4.848596] initcall inet_diag_init+0x0/0x5d returned 0 after 13 usecs
[ 4.848599] calling tcp_diag_init+0x0/0xf @ 1
[ 4.848628] initcall tcp_diag_init+0x0/0xf returned 0 after 23 usecs
[ 4.848631] calling bictcp_register+0x0/0xf @ 1
[ 4.848636] TCP bic registered
[ 4.848640] initcall bictcp_register+0x0/0xf returned 0 after 3 usecs
[ 4.848643] calling cubictcp_register+0x0/0x7f @ 1
[ 4.848647] TCP cubic registered
[ 4.848651] initcall cubictcp_register+0x0/0x7f returned 0 after 2 usecs
[ 4.848654] calling tcp_westwood_register+0x0/0xf @ 1
[ 4.848658] TCP westwood registered
[ 4.848662] initcall tcp_westwood_register+0x0/0xf returned 0 after 2 usecs
[ 4.848665] calling hstcp_register+0x0/0xf @ 1
[ 4.848669] TCP highspeed registered
[ 4.848673] initcall hstcp_register+0x0/0xf returned 0 after 2 usecs
[ 4.848676] calling hybla_register+0x0/0xf @ 1
[ 4.848680] TCP hybla registered
[ 4.848684] initcall hybla_register+0x0/0xf returned 0 after 2 usecs
[ 4.848687] calling htcp_register+0x0/0xf @ 1
[ 4.848691] TCP htcp registered
[ 4.848695] initcall htcp_register+0x0/0xf returned 0 after 3 usecs
[ 4.848698] calling tcp_vegas_register+0x0/0x11 @ 1
[ 4.848702] TCP vegas registered
[ 4.848708] initcall tcp_vegas_register+0x0/0x11 returned 0 after 4 usecs
[ 4.848711] calling tcp_veno_register+0x0/0x11 @ 1
[ 4.848715] TCP veno registered
[ 4.848719] initcall tcp_veno_register+0x0/0x11 returned 0 after 2 usecs
[ 4.848722] calling tcp_scalable_register+0x0/0xf @ 1
[ 4.848726] TCP scalable registered
[ 4.848730] initcall tcp_scalable_register+0x0/0xf returned 0 after 2 usecs
[ 4.848733] calling tcp_lp_register+0x0/0xf @ 1
[ 4.848737] TCP lp registered
[ 4.848741] initcall tcp_lp_register+0x0/0xf returned 0 after 2 usecs
[ 4.848744] calling tcp_yeah_register+0x0/0x11 @ 1
[ 4.848748] TCP yeah registered
[ 4.848752] initcall tcp_yeah_register+0x0/0x11 returned 0 after 2 usecs
[ 4.848755] calling tcp_illinois_register+0x0/0xf @ 1
[ 4.848759] TCP illinois registered
[ 4.848763] initcall tcp_illinois_register+0x0/0xf returned 0 after 2 usecs
[ 4.848767] calling xfrm_user_init+0x0/0x40 @ 1
[ 4.848770] Initializing XFRM netlink socket
[ 4.848801] initcall xfrm_user_init+0x0/0x40 returned 0 after 28 usecs
[ 4.848804] calling inet6_init+0x0/0x2a2 @ 1
[ 5.226733] async_continuing @ 1033 after 1 usec
[ 5.226742] NET: Registered protocol family 10
[ 5.235982] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5
[ 5.236092] lo: Disabled Privacy Extensions
[ 5.236434] tunl0: Disabled Privacy Extensions
[ 5.236566] initcall inet6_init+0x0/0x2a2 returned 0 after 378667 usecs
[ 5.236569] calling ah6_init+0x0/0x5a @ 1
[ 5.236576] initcall ah6_init+0x0/0x5a returned 0 after 2 usecs
[ 5.236579] calling esp6_init+0x0/0x5a @ 1
[ 5.236587] initcall esp6_init+0x0/0x5a returned 0 after 2 usecs
[ 5.236590] calling ipcomp6_init+0x0/0x5a @ 1
[ 5.236598] initcall ipcomp6_init+0x0/0x5a returned 0 after 2 usecs
[ 5.236601] calling xfrm6_tunnel_init+0x0/0xbc @ 1
[ 5.295128] initcall xfrm6_tunnel_init+0x0/0xbc returned 0 after 57149 usecs
[ 5.295405] calling 8_sd_probe_async+0x0/0x1b6 @ 1032
[ 5.295484] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.295580] sd 3:0:0:0: [sdb] Write Protect is off
[ 5.295583] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.295623] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.312478] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 5.312496] initcall 4_async_port_probe+0x0/0x9d returned 0 after 1556579 usecs
[ 5.312508] async_continuing @ 1034 after 1383039 usec
[ 5.312512] initcall 5_async_port_probe+0x0/0x9d returned 0 after 1556561 usecs
[ 5.312520] async_continuing @ 1035 after 1397316 usec
[ 5.312524] initcall 6_async_port_probe+0x0/0x9d returned 0 after 1556365 usecs
[ 5.366129] calling tunnel6_init+0x0/0x5a @ 1
[ 5.370584] initcall tunnel6_init+0x0/0x5a returned 0 after 1 usecs
[ 5.376855] calling xfrm6_transport_init+0x0/0x14 @ 1
[ 5.382012] initcall xfrm6_transport_init+0x0/0x14 returned 0 after 1 usecs
[ 5.388979] calling xfrm6_mode_tunnel_init+0x0/0x14 @ 1
[ 5.394304] initcall xfrm6_mode_tunnel_init+0x0/0x14 returned 0 after 1 usecs
[ 5.401441] calling xfrm6_ro_init+0x0/0x14 @ 1
[ 5.405985] initcall xfrm6_ro_init+0x0/0x14 returned 0 after 1 usecs
[ 5.412344] calling xfrm6_beet_init+0x0/0x14 @ 1
[ 5.417063] initcall xfrm6_beet_init+0x0/0x14 returned 0 after 1 usecs
[ 5.423594] calling mip6_init+0x0/0xa7 @ 1
[ 5.427789] Mobile IPv6
[ 5.430252] initcall mip6_init+0x0/0xa7 returned 0 after 2404 usecs
[ 5.436526] calling sit_init+0x0/0x50 @ 1
[ 5.440633] IPv6 over IPv4 tunneling driver
[ 5.444965] sda1 sda2 sda3
[ 5.448220] sit0: Disabled Privacy Extensions
[ 5.452643] initcall sit_init+0x0/0x50 returned 0 after 11725 usecs
[ 5.458920] calling ip6_tunnel_init+0x0/0x7a @ 1
[ 5.463915] ip6tnl0: Disabled Privacy Extensions
[ 5.468580] initcall ip6_tunnel_init+0x0/0x7a returned 0 after 4827 usecs
[ 5.475380] calling packet_init+0x0/0x39 @ 1
[ 5.479747] NET: Registered protocol family 17
[ 5.484213] initcall packet_init+0x0/0x39 returned 0 after 4360 usecs
[ 5.490659] calling ipsec_pfkey_init+0x0/0x6b @ 1
[ 5.495464] NET: Registered protocol family 15
[ 5.499916] initcall ipsec_pfkey_init+0x0/0x6b returned 0 after 4351 usecs
[ 5.506795] calling br_init+0x0/0xa7 @ 1
[ 5.510918] Bridge firewalling registered
[ 5.514972] initcall br_init+0x0/0xa7 returned 0 after 4056 usecs
[ 5.521070] calling vlan_proto_init+0x0/0x8d @ 1
[ 5.525784] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 5.532579] All bugs added by David S. Miller <davem@redhat.com>
[ 5.538632] initcall vlan_proto_init+0x0/0x8d returned 0 after 12545 usecs
[ 5.545513] calling powernowk8_init+0x0/0x141 @ 1
[ 5.550315] powernow-k8: Found 1 AMD Athlon(tm) Dual Core Processor 4450e (2 cpu cores) (version 2.20.00)
[ 5.560127] powernow-k8: 0 : fid 0xf (2300 MHz), vid 0xe
[ 5.565706] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xf
[ 5.571285] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x11
[ 5.576954] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0x13
[ 5.582620] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x16
[ 5.588668] usb 1-2: skipped 1 descriptor after interface
[ 5.588751] initcall powernowk8_init+0x0/0x141 returned 0 after 37536 usecs
[ 5.590378] usb 1-2: default language 0x0409
[ 5.595728] calling hpet_insert_resource+0x0/0x1e @ 1
[ 5.600880] initcall hpet_insert_resource+0x0/0x1e returned 0 after 3 usecs
[ 5.607849] calling update_mp_table+0x0/0x58d @ 1
[ 5.612654] initcall update_mp_table+0x0/0x58d returned 0 after 0 usecs
[ 5.617373] usb 1-2: udev 3, busnum 1, minor = 2
[ 5.617376] usb 1-2: New USB device found, idVendor=051d, idProduct=0002
[ 5.617378] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 5.617381] usb 1-2: Product: Back-UPS BR 800 FW:9.o5 .I USB FW:o5
[ 5.617383] usb 1-2: Manufacturer: American Power Conversion
[ 5.617386] usb 1-2: SerialNumber: 5B1018T25266
[ 5.649806] calling lapic_insert_resource+0x0/0x45 @ 1
[ 5.655043] initcall lapic_insert_resource+0x0/0x45 returned 0 after 1 usecs
[ 5.662094] calling print_ipi_mode+0x0/0x26 @ 1
[ 5.666724] Using IPI Shortcut mode
[ 5.670226] initcall print_ipi_mode+0x0/0x26 returned 0 after 3419 usecs
[ 5.676933] calling init_lapic_nmi_sysfs+0x0/0x33 @ 1
[ 5.682084] initcall init_lapic_nmi_sysfs+0x0/0x33 returned 0 after 0 usecs
[ 5.689050] calling io_apic_bug_finalize+0x0/0x1a @ 1
[ 5.694200] initcall io_apic_bug_finalize+0x0/0x1a returned 0 after 1 usecs
[ 5.701166] calling check_early_ioremap_leak+0x0/0x5e @ 1
[ 5.706667] initcall check_early_ioremap_leak+0x0/0x5e returned 0 after 0 usecs
[ 5.714059] calling sched_init_debug+0x0/0x7 @ 1
[ 5.718779] initcall sched_init_debug+0x0/0x7 returned 0 after 1 usecs
[ 5.725311] calling init_oops_id+0x0/0x3a @ 1
[ 5.729772] initcall init_oops_id+0x0/0x3a returned 0 after 5 usecs
[ 5.736049] calling disable_boot_consoles+0x0/0x41 @ 1
[ 5.741286] initcall disable_boot_consoles+0x0/0x41 returned 0 after 1 usecs
[ 5.748340] calling pm_qos_power_init+0x0/0xae @ 1
[ 5.753377] sdb:
[ 5.755234] usb 1-2: usb_probe_device
[ 5.755414] initcall pm_qos_power_init+0x0/0xae returned 0 after 2133 usecs
[ 5.755418] calling max_swapfiles_check+0x0/0x7 @ 1
[ 5.755426] initcall max_swapfiles_check+0x0/0x7 returned 0 after 2 usecs
[ 5.755430] calling random32_reseed+0x0/0x83 @ 1
[ 5.755450] initcall random32_reseed+0x0/0x83 returned 0 after 15 usecs
[ 5.755454] calling pci_resource_alignment_sysfs_init+0x0/0x14 @ 1
[ 5.755464] initcall pci_resource_alignment_sysfs_init+0x0/0x14 returned 0 after 5 usecs
[ 5.755468] calling pci_sysfs_init+0x0/0x44 @ 1
[ 5.755850] initcall pci_sysfs_init+0x0/0x44 returned 0 after 369 usecs
[ 5.755853] calling seqgen_init+0x0/0xe @ 1
[ 5.755874] initcall seqgen_init+0x0/0xe returned 0 after 15 usecs
[ 5.755879] calling scsi_complete_async_scans+0x0/0xe6 @ 1
[ 5.755886] initcall scsi_complete_async_scans+0x0/0xe6 returned 0 after 2 usecs
[ 5.755890] calling memmap_init+0x0/0x2c @ 1
[ 5.755954] initcall memmap_init+0x0/0x2c returned 0 after 58 usecs
[ 5.755958] calling pci_mmcfg_late_insert_resources+0x0/0x59 @ 1
[ 5.755966] initcall pci_mmcfg_late_insert_resources+0x0/0x59 returned 0 after 2 usecs
[ 5.755969] calling tcp_congestion_default+0x0/0xf @ 1
[ 5.755976] initcall tcp_congestion_default+0x0/0xf returned 0 after 2 usecs
[ 5.755980] calling initialize_hashrnd+0x0/0x16 @ 1
[ 5.755990] initcall initialize_hashrnd+0x0/0x16 returned 0 after 4 usecs
[ 5.765987] sdb1 sdb2 sdb3
[ 5.885892] usb 1-2: configuration #1 chosen from 1 choice
[ 5.886396] sd 1:0:0:0: [sda] Attached SCSI disk
[ 5.891133] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
[ 5.891219] initcall 7_sd_probe_async+0x0/0x1b6 returned 0 after 1214488 usecs
[ 5.899061] usbhid 1-2:1.0: usb_probe_interface
[ 5.899065] usbhid 1-2:1.0: usb_probe_interface - got id
[ 5.899767] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 5.904686] initcall 8_sd_probe_async+0x0/0x1b6 returned 0 after 594994 usecs
[ 6.213412] drivers/usb/core/file.c: looking for a minor, starting at 96
[ 6.214445] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS BR 800 FW:9.o5 .I USB FW:o5 ] on usb-0000:00:13.0-2/input0
[ 6.231708] drivers/usb/core/inode.c: creating file '003'
[ 6.231733] async_waiting @ 1
[ 6.231754] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 6.231768] hub 2-0:1.0: state 7 ports 2 chg 0006 evt 0000
[ 6.231777] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 6.234942] async_continuing @ 1 after 1 usec
[ 6.239564] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[ 6.293032] ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 6.330625] EXT3-fs: barriers not enabled
[ 6.344028] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 6.361609] kjournald starting. Commit interval 5 seconds
[ 6.361831] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 6.361919] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[ 6.361928] async_waiting @ 1
[ 6.361933] async_continuing @ 1 after 2 usec
[ 6.389058] Freeing unused kernel memory: 376k freed
[ 6.394694] Write protecting the kernel text: 3160k
[ 6.400051] Write protecting the kernel read-only data: 1344k
[ 6.440028] ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 6.519363] usb 2-1: default language 0x0409
[ 6.531358] usb 2-1: udev 2, busnum 2, minor = 129
[ 6.531362] usb 2-1: New USB device found, idVendor=0572, idProduct=cafe
[ 6.539724] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.548227] usb 2-1: Product: ADSL USB MODEM
[ 6.552784] usb 2-1: Manufacturer: -
[ 6.556562] usb 2-1: SerialNumber: 28217989
[ 6.578311] usb 2-1: usb_probe_device
[ 6.578318] usb 2-1: configuration #1 chosen from 1 choice
[ 6.579369] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[ 6.579815] drivers/usb/core/inode.c: creating file '002'
[ 6.579871] hub 2-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
[ 6.641296] ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 6.692286] usb 2-2: new low speed USB device using ohci_hcd and address 3
[ 6.764022] ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 6.835353] usb 2-2: skipped 1 descriptor after interface
[ 6.837350] usb 2-2: default language 0x0409
[ 6.843351] usb 2-2: udev 3, busnum 2, minor = 130
[ 6.843354] usb 2-2: New USB device found, idVendor=077d, idProduct=1016
[ 6.850518] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.858083] usb 2-2: Product: AirClick USB
[ 6.862410] usb 2-2: Manufacturer: Griffin Technology, Inc.
[ 6.868574] usb 2-2: usb_probe_device
[ 6.868578] usb 2-2: configuration #1 chosen from 1 choice
[ 6.872352] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
[ 6.874510] usbhid 2-2:1.0: usb_probe_interface
[ 6.874513] usbhid 2-2:1.0: usb_probe_interface - got id
[ 6.880365] drivers/usb/core/file.c: looking for a minor, starting at 96
[ 6.880657] generic-usb 0003:077D:1016.0002: hiddev97,hidraw1: USB HID v1.00 Device [Griffin Technology, Inc. AirClick USB] on usb-0000:00:13.1-2/input0
[ 6.895364] drivers/usb/core/inode.c: creating file '003'
[ 6.895420] hub 3-0:1.0: state 7 ports 2 chg 0006 evt 0000
[ 6.895434] hub 3-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 6.958022] ohci_hcd 0000:00:13.2: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 7.008038] usb 3-1: new full speed USB device using ohci_hcd and address 2
[ 7.077043] ohci_hcd 0000:00:13.2: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 7.141267] usb 3-1: ep0 maxpacket = 8
[ 7.147765] usb 3-1: default language 0x0409
[ 7.151764] usb 3-1: udev 2, busnum 3, minor = 257
[ 7.151767] usb 3-1: New USB device found, idVendor=0a5c, idProduct=4500
[ 7.158897] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.166477] usb 3-1: Product: BCM2045B2
[ 7.170634] usb 3-1: Manufacturer: Broadcom
[ 7.175385] usb 3-1: usb_probe_device
[ 7.175390] usb 3-1: configuration #1 chosen from 1 choice
[ 7.175771] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
[ 7.175885] hub 3-1:1.0: usb_probe_interface
[ 7.175888] hub 3-1:1.0: usb_probe_interface - got id
[ 7.175891] hub 3-1:1.0: USB hub found
[ 7.180765] hub 3-1:1.0: 3 ports detected
[ 7.185140] hub 3-1:1.0: compound device; port removable status: FFF
[ 7.185143] hub 3-1:1.0: ganged power switching
[ 7.185145] hub 3-1:1.0: global over-current protection
[ 7.185148] hub 3-1:1.0: power on to power good time: 100ms
[ 7.185765] hub 3-1:1.0: hub controller current requirement: 100mA
[ 7.185768] hub 3-1:1.0: 100mA bus power budget for each child
[ 7.187764] hub 3-1:1.0: no over-current condition exists
[ 7.187767] hub 3-1:1.0: enabling power on all ports
[ 7.193904] drivers/usb/core/inode.c: creating file '002'
[ 7.193952] hub 3-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 7.235456] md: md0 stopped.
[ 7.240505] md: bind<sdb3>
[ 7.243697] md: bind<sda3>
[ 7.246923] md/raid1:md0: active with 2 out of 2 mirrors
[ 7.255279] ohci_hcd 0000:00:13.2: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
[ 7.293770] hub 3-1:1.0: port 1: status 0101 change 0001
[ 7.296997] md0: bitmap initialized from disk: read 8/8 pages, set 206 bits
[ 7.304411] created bitmap (117 pages) for device md0
[ 7.309989] usb 3-2: new full speed USB device using ohci_hcd and address 3
[ 7.324101] md0: detected capacity change from 0 to 498484727808
[ 7.332199] md0: detected capacity change from 0 to 498484727808
[ 7.339884] md0: unknown partition table
[ 7.381034] ohci_hcd 0000:00:13.2: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
[ 7.438487] EXT3-fs: barriers not enabled
[ 7.446025] usb 3-2: ep0 maxpacket = 8
[ 7.446889] kjournald starting. Commit interval 5 seconds
[ 7.447150] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 7.462778] usb 3-2: default language 0x0409
[ 7.470774] usb 3-2: udev 3, busnum 3, minor = 258
[ 7.470777] usb 3-2: New USB device found, idVendor=0403, idProduct=6001
[ 7.477868] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.485456] usb 3-2: Product: USB-to-Serial
[ 7.489891] usb 3-2: Manufacturer: FTDI
[ 7.493993] usb 3-2: SerialNumber: FTB3ODJO
[ 7.498747] usb 3-2: usb_probe_device
[ 7.498752] usb 3-2: configuration #1 chosen from 1 choice
[ 7.499776] usb 3-2: adding 3-2:1.0 (config #1, interface 0)
[ 7.632101] drivers/usb/core/inode.c: creating file '003'
[ 7.632146] hub 4-0:1.0: state 7 ports 2 chg 0006 evt 0000
[ 7.632160] hub 4-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 7.694029] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 7.745274] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 7.815028] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 7.879271] usb 4-1: ep0 maxpacket = 8
[ 7.886370] usb 4-1: default language 0x0409
[ 7.888371] usb 4-1: udev 2, busnum 4, minor = 385
[ 7.888374] usb 4-1: New USB device found, idVendor=4348, idProduct=5523
[ 7.895483] usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7.903041] usb 4-1: Product: USB-SER!
[ 7.907750] usb 4-1: usb_probe_device
[ 7.907755] usb 4-1: configuration #1 chosen from 1 choice
[ 7.908377] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
[ 7.910049] drivers/usb/core/inode.c: creating file '002'
[ 7.910119] hub 4-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 7.971034] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
[ 8.022284] usb 4-2: new full speed USB device using ohci_hcd and address 3
[ 8.092038] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
[ 8.163378] usb 4-2: default language 0x0409
[ 8.165378] usb 4-2: udev 3, busnum 4, minor = 386
[ 8.165382] usb 4-2: New USB device found, idVendor=05e3, idProduct=0608
[ 8.172480] usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 8.180153] usb 4-2: Product: USB2.0 Hub
[ 8.184660] usb 4-2: usb_probe_device
[ 8.184665] usb 4-2: configuration #1 chosen from 1 choice
[ 8.185376] usb 4-2: adding 4-2:1.0 (config #1, interface 0)
[ 8.185566] hub 4-2:1.0: usb_probe_interface
[ 8.185570] hub 4-2:1.0: usb_probe_interface - got id
[ 8.185572] hub 4-2:1.0: USB hub found
[ 8.190380] hub 4-2:1.0: 4 ports detected
[ 8.194692] hub 4-2:1.0: standalone hub
[ 8.194695] hub 4-2:1.0: individual port power switching
[ 8.194698] hub 4-2:1.0: individual port over-current protection
[ 8.194701] hub 4-2:1.0: TT requires at most 32 FS bit times (2664 ns)
[ 8.194704] hub 4-2:1.0: Port indicators are supported
[ 8.194706] hub 4-2:1.0: power on to power good time: 100ms
[ 8.197372] hub 4-2:1.0: local power source is good
[ 8.197378] hub 4-2:1.0: enabling power on all ports
[ 8.205648] drivers/usb/core/inode.c: creating file '003'
[ 8.205705] hub 5-0:1.0: state 7 ports 2 chg 0006 evt 0000
[ 8.205718] hub 5-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 8.267035] ohci_hcd 0000:00:13.4: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 8.311378] hub 4-2:1.0: port 4: status 0101 change 0001
[ 8.318029] usb 5-1: new full speed USB device using ohci_hcd and address 2
[ 8.388029] ohci_hcd 0000:00:13.4: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
[ 8.458373] usb 5-1: default language 0x0409
[ 8.460377] usb 5-1: udev 2, busnum 5, minor = 513
[ 8.460380] usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
[ 8.467461] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 8.475116] usb 5-1: Product: USB2.0 Hub
[ 8.479674] usb 5-1: usb_probe_device
[ 8.479679] usb 5-1: configuration #1 chosen from 1 choice
[ 8.480378] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
[ 8.480569] hub 5-1:1.0: usb_probe_interface
[ 8.480573] hub 5-1:1.0: usb_probe_interface - got id
[ 8.480575] hub 5-1:1.0: USB hub found
[ 8.485383] hub 5-1:1.0: 4 ports detected
[ 8.489669] hub 5-1:1.0: standalone hub
[ 8.489671] hub 5-1:1.0: individual port power switching
[ 8.489674] hub 5-1:1.0: individual port over-current protection
[ 8.489677] hub 5-1:1.0: TT requires at most 32 FS bit times (2664 ns)
[ 8.489680] hub 5-1:1.0: Port indicators are supported
[ 8.489682] hub 5-1:1.0: power on to power good time: 100ms
[ 8.492373] hub 5-1:1.0: local power source is good
[ 8.492379] hub 5-1:1.0: enabling power on all ports
[ 8.500660] drivers/usb/core/inode.c: creating file '002'
[ 8.500722] hub 5-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 8.562039] ohci_hcd 0000:00:13.4: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
[ 8.606377] hub 5-1:1.0: port 4: status 0101 change 0001
[ 8.613036] usb 5-2: new full speed USB device using ohci_hcd and address 3
[ 8.675281] ohci_hcd 0000:00:13.4: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
[ 8.739022] usb 5-2: ep0 maxpacket = 8
[ 8.745380] usb 5-2: default language 0x0409
[ 8.747382] usb 5-2: udev 3, busnum 5, minor = 514
[ 8.747385] usb 5-2: New USB device found, idVendor=4348, idProduct=5523
[ 8.747389] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 8.747392] usb 5-2: Product: USB-SER!
[ 8.747768] usb 5-2: usb_probe_device
[ 8.747772] usb 5-2: configuration #1 chosen from 1 choice
[ 8.749380] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
[ 8.750640] drivers/usb/core/inode.c: creating file '003'
[ 8.750698] hub 1-1:1.0: state 7 ports 4 chg 0010 evt 0000
[ 8.751427] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
[ 8.817416] usb 1-1.4: new full speed USB device using ohci_hcd and address 4
[ 8.905422] usb 1-1.4: default language 0x0409
[ 8.909421] usb 1-1.4: udev 4, busnum 1, minor = 3
[ 8.909425] usb 1-1.4: New USB device found, idVendor=12d1, idProduct=1003
[ 8.909428] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.909431] usb 1-1.4: Product: HUAWEI Mobile
[ 8.909434] usb 1-1.4: Manufacturer: HUAWEI Technologies
[ 8.909807] usb 1-1.4: usb_probe_device
[ 8.909812] usb 1-1.4: configuration #1 chosen from 1 choice
[ 8.911424] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
[ 8.913611] usb-storage 1-1.4:1.0: usb_probe_interface
[ 8.913616] usb-storage 1-1.4:1.0: usb_probe_interface - got id
[ 8.913943] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1)
[ 8.915576] usb-storage 1-1.4:1.1: usb_probe_interface
[ 8.915581] usb-storage 1-1.4:1.1: usb_probe_interface - got id
[ 8.916471] usb 1-1.4: adding 1-1.4:1.2 (config #1, interface 2)
[ 8.916712] usb-storage 1-1.4:1.2: usb_probe_interface
[ 8.916717] usb-storage 1-1.4:1.2: usb_probe_interface - got id
[ 8.919511] scsi8 : usb-storage 1-1.4:1.2
[ 8.920005] drivers/usb/core/inode.c: creating file '004'
[ 8.920049] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 8.920065] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 8.920075] hub 3-1:1.0: state 7 ports 3 chg 0002 evt 0000
[ 8.920798] hub 3-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 8.984801] usb 3-1.1: new full speed USB device using ohci_hcd and address 4
[ 9.069808] usb 3-1.1: skipped 1 descriptor after interface
[ 9.071792] usb 3-1.1: default language 0x0409
[ 9.075794] usb 3-1.1: udev 4, busnum 3, minor = 259
[ 9.075797] usb 3-1.1: New USB device found, idVendor=0a5c, idProduct=2039
[ 9.075800] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.075803] usb 3-1.1: Product: BCM92045B3 ROM
[ 9.075806] usb 3-1.1: Manufacturer: Broadcom Corp
[ 9.075998] usb 3-1.1: usb_probe_device
[ 9.076002] usb 3-1.1: configuration #1 chosen from 1 choice
[ 9.077806] usb 3-1.1: adding 3-1.1:1.0 (config #1, interface 0)
[ 9.077934] usb 3-1.1: adding 3-1.1:1.1 (config #1, interface 1)
[ 9.078028] usb 3-1.1: adding 3-1.1:1.2 (config #1, interface 2)
[ 9.078124] usb 3-1.1: adding 3-1.1:1.3 (config #1, interface 3)
[ 9.078215] drivers/usb/core/inode.c: creating file '004'
[ 9.078267] hub 3-1:1.0: 300mA power budget left
[ 9.078273] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 9.078286] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 9.078297] hub 4-2:1.0: state 7 ports 4 chg 0010 evt 0000
[ 9.079383] hub 4-2:1.0: port 4, status 0101, change 0000, 12 Mb/s
[ 9.146395] usb 4-2.4: new full speed USB device using ohci_hcd and address 4
[ 9.235390] usb 4-2.4: default language 0x0409
[ 9.239388] usb 4-2.4: udev 4, busnum 4, minor = 387
[ 9.239391] usb 4-2.4: New USB device found, idVendor=12d1, idProduct=1003
[ 9.239395] usb 4-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.239398] usb 4-2.4: Product: HUAWEI Mobile
[ 9.239401] usb 4-2.4: Manufacturer: HUAWEI Technologies
[ 9.239667] usb 4-2.4: usb_probe_device
[ 9.239672] usb 4-2.4: configuration #1 chosen from 1 choice
[ 9.241397] usb 4-2.4: adding 4-2.4:1.0 (config #1, interface 0)
[ 9.243424] usb-storage 4-2.4:1.0: usb_probe_interface
[ 9.243429] usb-storage 4-2.4:1.0: usb_probe_interface - got id
[ 9.243641] usb 4-2.4: adding 4-2.4:1.1 (config #1, interface 1)
[ 9.245418] usb-storage 4-2.4:1.1: usb_probe_interface
[ 9.245423] usb-storage 4-2.4:1.1: usb_probe_interface - got id
[ 9.245561] usb 4-2.4: adding 4-2.4:1.2 (config #1, interface 2)
[ 9.245628] usb-storage 4-2.4:1.2: usb_probe_interface
[ 9.245633] usb-storage 4-2.4:1.2: usb_probe_interface - got id
[ 9.247424] scsi11 : usb-storage 4-2.4:1.2
[ 9.247659] drivers/usb/core/inode.c: creating file '004'
[ 9.247701] hub 5-1:1.0: state 7 ports 4 chg 0010 evt 0000
[ 9.248386] hub 5-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
[ 9.316391] usb 5-1.4: new full speed USB device using ohci_hcd and address 4
[ 9.399287] usb 5-1.4: ep0 maxpacket = 8
[ 9.406514] usb 5-1.4: default language 0x0409
[ 9.408574] usb 5-1.4: udev 4, busnum 5, minor = 515
[ 9.408579] usb 5-1.4: New USB device found, idVendor=4348, idProduct=5523
[ 9.408582] usb 5-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 9.408585] usb 5-1.4: Product: USB-SER!
[ 9.408835] usb 5-1.4: usb_probe_device
[ 9.408840] usb 5-1.4: configuration #1 chosen from 1 choice
[ 9.410448] usb 5-1.4: adding 5-1.4:1.0 (config #1, interface 0)
[ 9.410670] drivers/usb/core/inode.c: creating file '004'
[ 9.410727] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0010
[ 9.415269] hub 3-1:1.0: state 7 ports 3 chg 0000 evt 0002
[ 9.415802] hub 4-2:1.0: state 7 ports 4 chg 0000 evt 0010
[ 9.416387] hub 5-1:1.0: state 7 ports 4 chg 0000 evt 0010
[ 9.477401] calling usb_serial_init+0x0/0x1d0 [usbserial] @ 1297
[ 9.478329] usbcore: registered new interface driver usbserial
[ 9.478591] USB Serial support registered for generic
[ 9.478624] usbserial_generic 2-1:1.0: usb_probe_interface
[ 9.478627] usbserial_generic 2-1:1.0: usb_probe_interface - got id
[ 9.478660] usbserial_generic 3-2:1.0: usb_probe_interface
[ 9.478663] usbserial_generic 3-2:1.0: usb_probe_interface - got id
[ 9.478678] usbserial_generic 4-1:1.0: usb_probe_interface
[ 9.478681] usbserial_generic 4-1:1.0: usb_probe_interface - got id
[ 9.478700] usbserial_generic 5-2:1.0: usb_probe_interface
[ 9.478703] usbserial_generic 5-2:1.0: usb_probe_interface - got id
[ 9.478718] usbserial_generic 1-1.4:1.0: usb_probe_interface
[ 9.478721] usbserial_generic 1-1.4:1.0: usb_probe_interface - got id
[ 9.478735] usbserial_generic 1-1.4:1.1: usb_probe_interface
[ 9.478738] usbserial_generic 1-1.4:1.1: usb_probe_interface - got id
[ 9.478754] usbserial_generic 3-1.1:1.0: usb_probe_interface
[ 9.478757] usbserial_generic 3-1.1:1.0: usb_probe_interface - got id
[ 9.478771] usbserial_generic 3-1.1:1.1: usb_probe_interface
[ 9.478774] usbserial_generic 3-1.1:1.1: usb_probe_interface - got id
[ 9.478788] usbserial_generic 3-1.1:1.2: usb_probe_interface
[ 9.478790] usbserial_generic 3-1.1:1.2: usb_probe_interface - got id
[ 9.478804] usbserial_generic 3-1.1:1.3: usb_probe_interface
[ 9.478806] usbserial_generic 3-1.1:1.3: usb_probe_interface - got id
[ 9.478821] usbserial_generic 4-2.4:1.0: usb_probe_interface
[ 9.478824] usbserial_generic 4-2.4:1.0: usb_probe_interface - got id
[ 9.478839] usbserial_generic 4-2.4:1.1: usb_probe_interface
[ 9.478841] usbserial_generic 4-2.4:1.1: usb_probe_interface - got id
[ 9.478857] usbserial_generic 5-1.4:1.0: usb_probe_interface
[ 9.478860] usbserial_generic 5-1.4:1.0: usb_probe_interface - got id
[ 9.479286] usbcore: registered new interface driver usbserial_generic
[ 9.479289] usbserial: USB Serial Driver core
[ 9.479300] initcall usb_serial_init+0x0/0x1d0 [usbserial] returned 0 after 1842 usecs
[ 9.503208] calling option_init+0x0/0x4c [option] @ 1296
[ 9.503691] USB Serial support registered for GSM modem (1-port)
[ 9.503927] option 1-1.4:1.0: usb_probe_interface
[ 9.503931] option 1-1.4:1.0: usb_probe_interface - got id
[ 9.503941] option 1-1.4:1.0: GSM modem (1-port) converter detected
[ 9.505023] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
[ 9.505044] option 1-1.4:1.1: usb_probe_interface
[ 9.505048] option 1-1.4:1.1: usb_probe_interface - got id
[ 9.505054] option 1-1.4:1.1: GSM modem (1-port) converter detected
[ 9.505266] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
[ 9.505325] option 4-2.4:1.0: usb_probe_interface
[ 9.505329] option 4-2.4:1.0: usb_probe_interface - got id
[ 9.505339] option 4-2.4:1.0: GSM modem (1-port) converter detected
[ 9.505621] usb 4-2.4: GSM modem (1-port) converter now attached to ttyUSB2
[ 9.505635] option 4-2.4:1.1: usb_probe_interface
[ 9.505639] option 4-2.4:1.1: usb_probe_interface - got id
[ 9.505644] option 4-2.4:1.1: GSM modem (1-port) converter detected
[ 9.505785] usb 4-2.4: GSM modem (1-port) converter now attached to ttyUSB3
[ 9.505827] usbcore: registered new interface driver option
[ 9.505829] option: v0.7.2:USB Driver for GSM modems
[ 9.505843] initcall option_init+0x0/0x4c [option] returned 0 after 2559 usecs
[ 9.507266] calling ch341_init+0x0/0x3d [ch341] @ 1354
[ 9.507304] USB Serial support registered for ch341-uart
[ 9.507337] ch341 4-1:1.0: usb_probe_interface
[ 9.507340] ch341 4-1:1.0: usb_probe_interface - got id
[ 9.507345] ch341 4-1:1.0: ch341-uart converter detected
[ 9.533771] usb 4-1: ch341-uart converter now attached to ttyUSB4
[ 9.533794] ch341 5-2:1.0: usb_probe_interface
[ 9.533797] ch341 5-2:1.0: usb_probe_interface - got id
[ 9.533805] ch341 5-2:1.0: ch341-uart converter detected
[ 9.556597] usb 5-2: ch341-uart converter now attached to ttyUSB5
[ 9.556627] ch341 5-1.4:1.0: usb_probe_interface
[ 9.556630] ch341 5-1.4:1.0: usb_probe_interface - got id
[ 9.556636] ch341 5-1.4:1.0: ch341-uart converter detected
[ 9.580678] usb 5-1.4: ch341-uart converter now attached to ttyUSB6
[ 9.580712] usbcore: registered new interface driver ch341
[ 9.580722] initcall ch341_init+0x0/0x3d [ch341] returned 0 after 71724 usecs
[ 9.610497] udev: renamed network interface eth0 to re0
[ 9.925502] scsi 8:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 9.925808] scsi 8:0:0:0: Attached scsi generic sg2 type 5
[ 10.253450] scsi 11:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 10.253762] scsi 11:0:0:0: Attached scsi generic sg3 type 5
[ 10.374382] calling ftdi_init+0x0/0xb6 [ftdi_sio] @ 2534
[ 10.374427] USB Serial support registered for FTDI USB Serial Device
[ 10.374513] ftdi_sio 3-2:1.0: usb_probe_interface
[ 10.374516] ftdi_sio 3-2:1.0: usb_probe_interface - got id
[ 10.374524] ftdi_sio 3-2:1.0: FTDI USB Serial Device converter detected
[ 10.374583] usb 3-2: Detected FT232BM
[ 10.374586] usb 3-2: Number of endpoints 2
[ 10.374588] usb 3-2: Endpoint 1 MaxPacketSize 64
[ 10.374591] usb 3-2: Endpoint 2 MaxPacketSize 64
[ 10.374593] usb 3-2: Setting MaxPacketSize 64
[ 10.387298] usb 3-2: FTDI USB Serial Device converter now attached to ttyUSB7
[ 10.387430] usbcore: registered new interface driver ftdi_sio
[ 10.387433] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[ 10.387449] initcall ftdi_init+0x0/0xb6 [ftdi_sio] returned 0 after 12743 usecs
[ 10.390333] calling usbatm_usb_init+0x0/0x40 [usbatm] @ 2528
[ 10.390342] initcall usbatm_usb_init+0x0/0x40 [usbatm] returned 0 after 0 usecs
[ 10.402959] calling cxacru_init+0x0/0x19 [cxacru] @ 2528
[ 10.402993] cxacru 2-1:1.0: usb_probe_interface
[ 10.402996] cxacru 2-1:1.0: usb_probe_interface - got id
[ 10.456230] calling bt_init+0x0/0x50 [bluetooth] @ 2531
[ 10.456236] Bluetooth: Core ver 2.15
[ 10.456411] NET: Registered protocol family 31
[ 10.456414] Bluetooth: HCI device and connection manager initialized
[ 10.456516] Bluetooth: HCI socket layer initialized
[ 10.456526] initcall bt_init+0x0/0x50 [bluetooth] returned 0 after 276 usecs
[ 10.472632] calling btusb_init+0x0/0x28 [btusb] @ 2536
[ 10.472637] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.472682] btusb 3-1.1:1.0: usb_probe_interface
[ 10.472686] btusb 3-1.1:1.0: usb_probe_interface - got id
[ 10.482336] btusb 3-1.1:1.2: usb_probe_interface
[ 10.482341] btusb 3-1.1:1.2: usb_probe_interface - got id
[ 10.482358] btusb 3-1.1:1.3: usb_probe_interface
[ 10.482361] btusb 3-1.1:1.3: usb_probe_interface - got id
[ 10.482401] usbcore: registered new interface driver btusb
[ 10.482411] initcall btusb_init+0x0/0x28 [btusb] returned 0 after 9540 usecs
[ 10.501532] cxacru0: ADSL USB MODEM (usb-0000:00:13.1-1) 00:05:b4:12:05:30
[ 10.501775] calling e1000_init_module+0x0/0x71 [e1000] @ 2603
[ 10.501780] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI
[ 10.501783] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 10.501857] e1000 0000:02:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 10.535811] ATM dev 0: ADSL state: running
[ 10.535816] ATM dev 0: ADSL line: up (8128 kb/s down | 832 kb/s up)
[ 10.536070] usbcore: registered new interface driver cxacru
[ 10.536081] initcall cxacru_init+0x0/0x19 [cxacru] returned 0 after 129990 usecs
[ 10.801390] e1000 0000:02:07.0: eth0: (PCI:33MHz:32-bit) 00:04:23:a8:25:f0
[ 10.801581] e1000 0000:02:07.0: eth0: Intel(R) PRO/1000 Network Connection
[ 10.801617] e1000 0000:02:07.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 11.099268] e1000 0000:02:07.1: eth1: (PCI:33MHz:32-bit) 00:04:23:a8:25:f1
[ 11.099272] e1000 0000:02:07.1: eth1: Intel(R) PRO/1000 Network Connection
[ 11.099313] initcall e1000_init_module+0x0/0x71 [e1000] returned 0 after 583520 usecs
[ 11.105180] udev: renamed network interface eth1 to em1
[ 11.109430] udev: renamed network interface eth0 to em0
[ 11.825034] EXT3-fs (md0): using internal journal
[ 12.743479] EXT3-fs: barriers not enabled
[ 12.752551] kjournald starting. Commit interval 5 seconds
[ 12.752771] EXT3-fs (sda1): using internal journal
[ 12.752782] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 12.756934] EXT3-fs: barriers not enabled
[ 12.757096] kjournald starting. Commit interval 5 seconds
[ 12.757308] EXT3-fs (sdb1): using internal journal
[ 12.757317] EXT3-fs (sdb1): mounted filesystem with ordered data mode
[ 12.823409] Adding 1060284k swap on /dev/sda2. Priority:-1 extents:1 across:1060284k
[ 12.840170] Adding 1060284k swap on /dev/sdb2. Priority:-2 extents:1 across:1060284k
[ 14.877252] calling ifb_init_module+0x0/0x9a [ifb] @ 2842
[ 14.878928] initcall ifb_init_module+0x0/0x9a [ifb] returned 0 after 1618 usecs
[ 14.902377] calling teql_init+0x0/0xc3 [sch_teql] @ 2847
[ 14.904074] initcall teql_init+0x0/0xc3 [sch_teql] returned 0 after 1650 usecs
[ 14.918894] calling dummy_init_module+0x0/0x95 [dummy] @ 2872
[ 14.919184] initcall dummy_init_module+0x0/0x95 [dummy] returned 0 after 275 usecs
[ 14.957702] calling ppp_init+0x0/0xc8 [ppp_generic] @ 2901
[ 14.957708] PPP generic driver version 2.4.2
[ 14.957939] initcall ppp_init+0x0/0xc8 [ppp_generic] returned 0 after 222 usecs
[-- Attachment #4: config --]
[-- Type: application/octet-stream, Size: 66099 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.35.4
# Sun Aug 29 15:57:51 2010
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-git"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
#
# GCOV-based kernel profiling
#
CONFIG_SLOW_WORK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_MRST is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
# CONFIG_CPU_SUP_INTEL is not set
# CONFIG_CPU_SUP_CYRIX_32 is not set
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_CPU_SUP_TRANSMETA_32 is not set
# CONFIG_CPU_SUP_UMC_32 is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_POWER_METER is not set
CONFIG_ACPI_SYSFS_POWER=y
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_SECURITY is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_RDS=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
# CONFIG_TIPC is not set
CONFIG_ATM=y
# CONFIG_ATM_CLIP is not set
# CONFIG_ATM_LANE is not set
# CONFIG_ATM_BR2684 is not set
CONFIG_L2TP=m
# CONFIG_L2TP_V3 is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_RPS=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_L2CAP_EXT_FEATURES=y
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HIDP is not set
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_BT_ATH3K is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
#
# Some wireless drivers require a rate control algorithm
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_CS5535_MFGPT is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
# CONFIG_IEEE1394_PCILYNX is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=y
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
CONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_PPPOL2TP=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
CONFIG_N_HDLC=y
# CONFIG_N_GSM is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_MFD_SUPPORT=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS6507X is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TC35892 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_RTCTIMER=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_ATIHDMI is not set
# CONFIG_SND_HDA_CODEC_NVHDMI is not set
# CONFIG_SND_HDA_CODEC_INTELHDMI is not set
CONFIG_SND_HDA_CODEC_CIRRUS=y
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
CONFIG_SND_HDA_CODEC_CA0110=y
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
# CONFIG_SND_HDA_GENERIC is not set
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=60
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
# CONFIG_HID_3M_PCT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CANDO is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EGALAX is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MOSART is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_FASTBOOT is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
CONFIG_USB_SERIAL_CH341=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_ATM=m
# CONFIG_USB_SPEEDTOUCH is not set
CONFIG_USB_CXACRU=m
# CONFIG_USB_UEAGLEATM is not set
# CONFIG_USB_XUSBATM is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="UTF-8"
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="UTF-8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RCU is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_PORTAC=y
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=m
CONFIG_VHOST_NET=m
# CONFIG_LGUEST is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: GA-MA69VM-S2 requires pci=nocrs with 2.6.35.4
2010-09-09 12:16 GA-MA69VM-S2 requires pci=nocrs with 2.6.35.4 Simon Arlott
@ 2010-09-13 23:16 ` Bjorn Helgaas
2010-09-14 11:38 ` Simon Arlott
0 siblings, 1 reply; 5+ messages in thread
From: Bjorn Helgaas @ 2010-09-13 23:16 UTC (permalink / raw)
To: Simon Arlott; +Cc: linux-kernel, linux-acpi, linux-pci, Jordan Crouse
On Thursday, September 09, 2010 06:16:33 am Simon Arlott wrote:
> With a Gigabyte GA-MA69VM-S2 690V motherboard, it stalls in
> qurk_usb_early_handoff unless pci=nocrs is used:
Huh. It looks like the HPET appears as a PCI device, in addition to
being described in the HPET table (and possibly in the ACPI namespace):
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.454232] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.461348] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.468004] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.474004] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.481004] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.489004] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 1.034049] pci 0000:00:14.0: no compatible bridge window for [mem 0xfed00000-0xfed003ff]
[ 1.651998] pci 0000:00:14.0: BAR 1: assigned [mem 0x80000000-0x800003ff]
Since the 00:14.0 BAR looks invalid (it's outside all the host bridge
windows), we moved it to 0x80000000, and that probably broke the HPET
driver, which still thinks it's at 0xfed00000.
I've heard about this problem, but I haven't ever looked into it in
detail. The best way to handle this would be to figure out why Windows
doesn't have this problem, since it also moves PCI devices in this
situation.
Simon, if you have a way to boot Windows, the output of Everest (free
trial at http://www.lavalys.com/) would be a great help.
I can see from the stalled.txt log that we did call sb600_disable_hpet_bar(),
and it *looks* like that should have disabled BAR 1. But apparently it
didn't. Would you mind collecting another log with the patch below?
Bjorn
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index 6dd8955..f793efd 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -510,6 +510,7 @@ static void sb600_disable_hpet_bar(struct pci_dev *dev)
*/
pci_read_config_byte(dev, 0x08, &val);
+ dev_info(&dev->dev, "read %#02x\n", val);
if (val < 0x2F) {
outb(0x55, 0xCD6);
@@ -517,7 +518,9 @@ static void sb600_disable_hpet_bar(struct pci_dev *dev)
/* Set bit 7 in PM register 0x55 */
outb(0x55, 0xCD6);
- outb(val | 0x80, 0xCD7);
+ outb(val | 0x7f, 0xCD7);
+ dev_info(&dev->dev, "disabled BAR 1 (%pR)\n",
+ &dev->resource[1]);
}
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, 0x4385, sb600_disable_hpet_bar);
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: GA-MA69VM-S2 requires pci=nocrs with 2.6.35.4
2010-09-13 23:16 ` Bjorn Helgaas
@ 2010-09-14 11:38 ` Simon Arlott
2010-09-14 14:17 ` Bjorn Helgaas
0 siblings, 1 reply; 5+ messages in thread
From: Simon Arlott @ 2010-09-14 11:38 UTC (permalink / raw)
To: Bjorn Helgaas; +Cc: linux-kernel, linux-acpi, linux-pci, Jordan Crouse
On Tue, September 14, 2010 00:16, Bjorn Helgaas wrote:
> On Thursday, September 09, 2010 06:16:33 am Simon Arlott wrote:
>> With a Gigabyte GA-MA69VM-S2 690V motherboard, it stalls in
>> qurk_usb_early_handoff unless pci=nocrs is used:
>
> Huh. It looks like the HPET appears as a PCI device, in addition to
> being described in the HPET table (and possibly in the ACPI namespace):
>
> [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
> [ 0.454232] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.461348] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
> [ 0.468004] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
> [ 0.474004] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
> [ 0.481004] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
> [ 0.489004] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff]
> [ 1.034049] pci 0000:00:14.0: no compatible bridge window for [mem 0xfed00000-0xfed003ff]
> [ 1.651998] pci 0000:00:14.0: BAR 1: assigned [mem 0x80000000-0x800003ff]
>
> Since the 00:14.0 BAR looks invalid (it's outside all the host bridge
> windows), we moved it to 0x80000000, and that probably broke the HPET
> driver, which still thinks it's at 0xfed00000.
>
> I've heard about this problem, but I haven't ever looked into it in
> detail. The best way to handle this would be to figure out why Windows
> doesn't have this problem, since it also moves PCI devices in this
> situation.
You're assuming Windows works on this hardware.
> Simon, if you have a way to boot Windows, the output of Everest (free
> trial at http://www.lavalys.com/) would be a great help.
Windows would take too long to install to try this.
> I can see from the stalled.txt log that we did call sb600_disable_hpet_bar(),
> and it *looks* like that should have disabled BAR 1. But apparently it
> didn't. Would you mind collecting another log with the patch below?
Whenever I next need to reboot, I can try the patch, but that won't be soon...
> Bjorn
>
>
> diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
> index 6dd8955..f793efd 100644
> --- a/arch/x86/pci/fixup.c
> +++ b/arch/x86/pci/fixup.c
> @@ -510,6 +510,7 @@ static void sb600_disable_hpet_bar(struct pci_dev *dev)
> */
>
> pci_read_config_byte(dev, 0x08, &val);
> + dev_info(&dev->dev, "read %#02x\n", val);
>
> if (val < 0x2F) {
> outb(0x55, 0xCD6);
> @@ -517,7 +518,9 @@ static void sb600_disable_hpet_bar(struct pci_dev *dev)
>
> /* Set bit 7 in PM register 0x55 */
> outb(0x55, 0xCD6);
> - outb(val | 0x80, 0xCD7);
> + outb(val | 0x7f, 0xCD7);
?
> + dev_info(&dev->dev, "disabled BAR 1 (%pR)\n",
> + &dev->resource[1]);
> }
> }
> DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, 0x4385, sb600_disable_hpet_bar);
>
--
Simon Arlott
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: GA-MA69VM-S2 requires pci=nocrs with 2.6.35.4
2010-09-14 11:38 ` Simon Arlott
@ 2010-09-14 14:17 ` Bjorn Helgaas
2010-09-15 2:48 ` Bjorn Helgaas
0 siblings, 1 reply; 5+ messages in thread
From: Bjorn Helgaas @ 2010-09-14 14:17 UTC (permalink / raw)
To: Simon Arlott, Jordan Crouse
Cc: linux-kernel, linux-acpi, linux-pci, Yinghai Lu
On Tuesday, September 14, 2010 05:38:49 am Simon Arlott wrote:
> On Tue, September 14, 2010 00:16, Bjorn Helgaas wrote:
> > On Thursday, September 09, 2010 06:16:33 am Simon Arlott wrote:
> >> With a Gigabyte GA-MA69VM-S2 690V motherboard, it stalls in
> >> qurk_usb_early_handoff unless pci=nocrs is used:
> >
> > Huh. It looks like the HPET appears as a PCI device, in addition to
> > being described in the HPET table (and possibly in the ACPI namespace):
> >
> > [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
> > [ 0.454232] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> > [ 0.461348] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
> > [ 0.468004] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
> > [ 0.474004] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
> > [ 0.481004] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
> > [ 0.489004] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff]
> > [ 1.034049] pci 0000:00:14.0: no compatible bridge window for [mem 0xfed00000-0xfed003ff]
> > [ 1.651998] pci 0000:00:14.0: BAR 1: assigned [mem 0x80000000-0x800003ff]
> >
> > Since the 00:14.0 BAR looks invalid (it's outside all the host bridge
> > windows), we moved it to 0x80000000, and that probably broke the HPET
> > driver, which still thinks it's at 0xfed00000.
> >
> > I've heard about this problem, but I haven't ever looked into it in
> > detail. The best way to handle this would be to figure out why Windows
> > doesn't have this problem, since it also moves PCI devices in this
> > situation.
>
> You're assuming Windows works on this hardware.
Yes, that's true. I found this user manual:
http://download.gigabyte.eu/FileList/Manual/motherboard_manual_ga-ma69vm-s2_e.pdf
which claims Windows 2000/XP/Vista support, but if you have
evidence that Windows does not work, that would be good to know.
> > Simon, if you have a way to boot Windows, the output of Everest (free
> > trial at http://www.lavalys.com/) would be a great help.
>
> Windows would take too long to install to try this.
>
> > I can see from the stalled.txt log that we did call sb600_disable_hpet_bar(),
> > and it *looks* like that should have disabled BAR 1. But apparently it
> > didn't. Would you mind collecting another log with the patch below?
>
> Whenever I next need to reboot, I can try the patch, but that won't be soon...
OK. Just let me know if/when you have any more information. I opened
this bugzilla for this problem:
https://bugzilla.kernel.org/show_bug.cgi?id=18482
Bjorn
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: GA-MA69VM-S2 requires pci=nocrs with 2.6.35.4
2010-09-14 14:17 ` Bjorn Helgaas
@ 2010-09-15 2:48 ` Bjorn Helgaas
0 siblings, 0 replies; 5+ messages in thread
From: Bjorn Helgaas @ 2010-09-15 2:48 UTC (permalink / raw)
To: Simon Arlott, Jordan Crouse
Cc: linux-kernel, linux-acpi, linux-pci, Yinghai Lu
On Tue, Sep 14, 2010 at 08:17:16AM -0600, Bjorn Helgaas wrote:
> On Tuesday, September 14, 2010 05:38:49 am Simon Arlott wrote:
> > On Tue, September 14, 2010 00:16, Bjorn Helgaas wrote:
> > > I can see from the stalled.txt log that we did call sb600_disable_hpet_bar(),
> > > and it *looks* like that should have disabled BAR 1. But apparently it
> > > didn't. Would you mind collecting another log with the patch below?
> >
> > Whenever I next need to reboot, I can try the patch, but that won't be soon...
>
> OK. Just let me know if/when you have any more information. I opened
> this bugzilla for this problem:
>
> https://bugzilla.kernel.org/show_bug.cgi?id=18482
I attached an updated patch to this bugzilla, so please give it
a try when it's convenient for you.
Bjorn
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2010-09-15 2:50 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-09-09 12:16 GA-MA69VM-S2 requires pci=nocrs with 2.6.35.4 Simon Arlott
2010-09-13 23:16 ` Bjorn Helgaas
2010-09-14 11:38 ` Simon Arlott
2010-09-14 14:17 ` Bjorn Helgaas
2010-09-15 2:48 ` Bjorn Helgaas
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.