* + rapidio-modify-sysfs-initialization-for-switches.patch added to -mm tree
@ 2010-09-14 22:21 akpm
0 siblings, 0 replies; only message in thread
From: akpm @ 2010-09-14 22:21 UTC (permalink / raw)
To: mm-commits; +Cc: alexandre.bounine, galak, leoli, micha, mporter, thomas.moll
The patch titled
rapidio: modify sysfs initialization for switches
has been added to the -mm tree. Its filename is
rapidio-modify-sysfs-initialization-for-switches.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: rapidio: modify sysfs initialization for switches
From: Alexandre Bounine <alexandre.bounine@idt.com>
1. Change to create attribute "routes" only for switches.
2. Add a switch-specific callback to create/remove proprietary attributes.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/rapidio/rio-sysfs.c | 26 +++++++++++++++++++-------
include/linux/rio.h | 6 ++++++
2 files changed, 25 insertions(+), 7 deletions(-)
diff -puN drivers/rapidio/rio-sysfs.c~rapidio-modify-sysfs-initialization-for-switches drivers/rapidio/rio-sysfs.c
--- a/drivers/rapidio/rio-sysfs.c~rapidio-modify-sysfs-initialization-for-switches
+++ a/drivers/rapidio/rio-sysfs.c
@@ -40,9 +40,6 @@ static ssize_t routes_show(struct device
char *str = buf;
int i;
- if (!rdev->rswitch)
- goto out;
-
for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
i++) {
if (rdev->rswitch->route_table[i] == RIO_INVALID_ROUTE)
@@ -52,7 +49,6 @@ static ssize_t routes_show(struct device
rdev->rswitch->route_table[i]);
}
- out:
return (str - buf);
}
@@ -63,10 +59,11 @@ struct device_attribute rio_dev_attrs[]
__ATTR_RO(asm_did),
__ATTR_RO(asm_vid),
__ATTR_RO(asm_rev),
- __ATTR_RO(routes),
__ATTR_NULL,
};
+static DEVICE_ATTR(routes, S_IRUGO, routes_show, NULL);
+
static ssize_t
rio_read_config(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr,
@@ -218,7 +215,17 @@ int rio_create_sysfs_dev_files(struct ri
{
int err = 0;
- err = sysfs_create_bin_file(&rdev->dev.kobj, &rio_config_attr);
+ err = device_create_bin_file(&rdev->dev, &rio_config_attr);
+
+ if (!err && rdev->rswitch) {
+ err = device_create_file(&rdev->dev, &dev_attr_routes);
+ if (!err && rdev->rswitch->sw_sysfs)
+ err = rdev->rswitch->sw_sysfs(rdev, RIO_SW_SYSFS_CREATE);
+ }
+
+ if (err)
+ pr_warning("RIO: Failed to create attribute file(s) for %s\n",
+ rio_name(rdev));
return err;
}
@@ -231,5 +238,10 @@ int rio_create_sysfs_dev_files(struct ri
*/
void rio_remove_sysfs_dev_files(struct rio_dev *rdev)
{
- sysfs_remove_bin_file(&rdev->dev.kobj, &rio_config_attr);
+ device_remove_bin_file(&rdev->dev, &rio_config_attr);
+ if (rdev->rswitch) {
+ device_remove_file(&rdev->dev, &dev_attr_routes);
+ if (rdev->rswitch->sw_sysfs)
+ rdev->rswitch->sw_sysfs(rdev, RIO_SW_SYSFS_REMOVE);
+ }
}
diff -puN include/linux/rio.h~rapidio-modify-sysfs-initialization-for-switches include/linux/rio.h
--- a/include/linux/rio.h~rapidio-modify-sysfs-initialization-for-switches
+++ a/include/linux/rio.h
@@ -218,6 +218,10 @@ struct rio_net {
unsigned char id; /* RIO network ID */
};
+/* Definitions used by switch sysfs initialization callback */
+#define RIO_SW_SYSFS_CREATE 1 /* Create switch attributes */
+#define RIO_SW_SYSFS_REMOVE 0 /* Remove switch attributes */
+
/**
* struct rio_switch - RIO switch info
* @node: Node in global list of switches
@@ -234,6 +238,7 @@ struct rio_net {
* @get_domain: Callback for switch-specific domain get function
* @em_init: Callback for switch-specific error management initialization function
* @em_handle: Callback for switch-specific error management handler function
+ * @sw_sysfs: Callback that initializes switch-specific sysfs attributes
* @nextdev: Array of per-port pointers to the next attached device
*/
struct rio_switch {
@@ -256,6 +261,7 @@ struct rio_switch {
u8 *sw_domain);
int (*em_init) (struct rio_dev *dev);
int (*em_handle) (struct rio_dev *dev, u8 swport);
+ int (*sw_sysfs) (struct rio_dev *dev, int create);
struct rio_dev *nextdev[0];
};
_
Patches currently in -mm which might be from alexandre.bounine@idt.com are
rapidio-fix-rapidio-sysfs-hierarchy.patch
rapidio-powerpc-85xx-modify-rio-port-write-interrupt-handler.patch
rapidio-use-stored-ingress-port-number-instead-of-register-read.patch
rapidio-add-relation-links-between-rio-device-structures.patch
rapidio-add-default-handler-for-error-stopped-state.patch
rapidio-modify-sysfs-initialization-for-switches.patch
rapidio-add-handling-of-orphan-port-write-message.patch
rapidio-add-device-access-check-into-the-enumeration.patch
rapidio-add-support-for-idt-cps-gen2-switches.patch
rapidio-add-handling-of-redundant-routes.patch
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-09-14 22:22 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-09-14 22:21 + rapidio-modify-sysfs-initialization-for-switches.patch added to -mm tree akpm
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.