* [PATCH 1/7] ir-core: dummy patch to base my work on top of Dmitry's large scancode work
2010-10-29 19:07 [PATCH 0/7] rc-core: ir-core to rc-core conversion David Härdeman
@ 2010-10-29 19:07 ` David Härdeman
2010-10-29 19:08 ` [PATCH 2/7] ir-core: convert drivers/media/video/cx88 to ir-core David Härdeman
` (7 subsequent siblings)
8 siblings, 0 replies; 18+ messages in thread
From: David Härdeman @ 2010-10-29 19:07 UTC (permalink / raw)
To: linux-media; +Cc: jarod, mchehab
This patch adds the changes from Dmitry's large scancode work for the
input subsystem (the patches to the input core and to rc-core which were
accepted upstream). Not to be applied :)
Not-signed-off-by: Anyone
---
drivers/char/keyboard.c | 31 ++-
drivers/input/evdev.c | 100 ++++++++--
drivers/input/input.c | 192 +++++++++++++++-----
drivers/media/IR/ir-keytable.c | 393 +++++++++++++++++++++++++++-------------
include/linux/input.h | 55 ++++--
include/media/rc-map.h | 2
6 files changed, 555 insertions(+), 218 deletions(-)
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index a7ca752..e95d787 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -175,8 +175,7 @@ EXPORT_SYMBOL_GPL(unregister_keyboard_notifier);
*/
struct getset_keycode_data {
- unsigned int scancode;
- unsigned int keycode;
+ struct input_keymap_entry ke;
int error;
};
@@ -184,32 +183,50 @@ static int getkeycode_helper(struct input_handle *handle, void *data)
{
struct getset_keycode_data *d = data;
- d->error = input_get_keycode(handle->dev, d->scancode, &d->keycode);
+ d->error = input_get_keycode(handle->dev, &d->ke);
return d->error == 0; /* stop as soon as we successfully get one */
}
int getkeycode(unsigned int scancode)
{
- struct getset_keycode_data d = { scancode, 0, -ENODEV };
+ struct getset_keycode_data d = {
+ .ke = {
+ .flags = 0,
+ .len = sizeof(scancode),
+ .keycode = 0,
+ },
+ .error = -ENODEV,
+ };
+
+ memcpy(d.ke.scancode, &scancode, sizeof(scancode));
input_handler_for_each_handle(&kbd_handler, &d, getkeycode_helper);
- return d.error ?: d.keycode;
+ return d.error ?: d.ke.keycode;
}
static int setkeycode_helper(struct input_handle *handle, void *data)
{
struct getset_keycode_data *d = data;
- d->error = input_set_keycode(handle->dev, d->scancode, d->keycode);
+ d->error = input_set_keycode(handle->dev, &d->ke);
return d->error == 0; /* stop as soon as we successfully set one */
}
int setkeycode(unsigned int scancode, unsigned int keycode)
{
- struct getset_keycode_data d = { scancode, keycode, -ENODEV };
+ struct getset_keycode_data d = {
+ .ke = {
+ .flags = 0,
+ .len = sizeof(scancode),
+ .keycode = keycode,
+ },
+ .error = -ENODEV,
+ };
+
+ memcpy(d.ke.scancode, &scancode, sizeof(scancode));
input_handler_for_each_handle(&kbd_handler, &d, setkeycode_helper);
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 9ddafc3..b9723c7 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -534,6 +534,80 @@ static int handle_eviocgbit(struct input_dev *dev,
}
#undef OLD_KEY_MAX
+static int evdev_handle_get_keycode(struct input_dev *dev,
+ void __user *p, size_t size)
+{
+ struct input_keymap_entry ke;
+ int error;
+
+ memset(&ke, 0, sizeof(ke));
+
+ if (size == sizeof(unsigned int[2])) {
+ /* legacy case */
+ int __user *ip = (int __user *)p;
+
+ if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
+ return -EFAULT;
+
+ ke.len = sizeof(unsigned int);
+ ke.flags = 0;
+
+ error = input_get_keycode(dev, &ke);
+ if (error)
+ return error;
+
+ if (put_user(ke.keycode, ip + 1))
+ return -EFAULT;
+
+ } else {
+ size = min(size, sizeof(ke));
+
+ if (copy_from_user(&ke, p, size))
+ return -EFAULT;
+
+ error = input_get_keycode(dev, &ke);
+ if (error)
+ return error;
+
+ if (copy_to_user(p, &ke, size))
+ return -EFAULT;
+ }
+ return 0;
+}
+
+static int evdev_handle_set_keycode(struct input_dev *dev,
+ void __user *p, size_t size)
+{
+ struct input_keymap_entry ke;
+
+ memset(&ke, 0, sizeof(ke));
+
+ if (size == sizeof(unsigned int[2])) {
+ /* legacy case */
+ int __user *ip = (int __user *)p;
+
+ if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
+ return -EFAULT;
+
+ if (get_user(ke.keycode, ip + 1))
+ return -EFAULT;
+
+ ke.len = sizeof(unsigned int);
+ ke.flags = 0;
+
+ } else {
+ size = min(size, sizeof(ke));
+
+ if (copy_from_user(&ke, p, size))
+ return -EFAULT;
+
+ if (ke.len > sizeof(ke.scancode))
+ return -EINVAL;
+ }
+
+ return input_set_keycode(dev, &ke);
+}
+
static long evdev_do_ioctl(struct file *file, unsigned int cmd,
void __user *p, int compat_mode)
{
@@ -580,25 +654,6 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
return 0;
- case EVIOCGKEYCODE:
- if (get_user(t, ip))
- return -EFAULT;
-
- error = input_get_keycode(dev, t, &v);
- if (error)
- return error;
-
- if (put_user(v, ip + 1))
- return -EFAULT;
-
- return 0;
-
- case EVIOCSKEYCODE:
- if (get_user(t, ip) || get_user(v, ip + 1))
- return -EFAULT;
-
- return input_set_keycode(dev, t, v);
-
case EVIOCRMFF:
return input_ff_erase(dev, (int)(unsigned long) p, file);
@@ -620,7 +675,6 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
/* Now check variable-length commands */
#define EVIOC_MASK_SIZE(nr) ((nr) & ~(_IOC_SIZEMASK << _IOC_SIZESHIFT))
-
switch (EVIOC_MASK_SIZE(cmd)) {
case EVIOCGKEY(0):
@@ -654,6 +708,12 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
return -EFAULT;
return error;
+
+ case EVIOC_MASK_SIZE(EVIOCGKEYCODE):
+ return evdev_handle_get_keycode(dev, p, size);
+
+ case EVIOC_MASK_SIZE(EVIOCSKEYCODE):
+ return evdev_handle_set_keycode(dev, p, size);
}
/* Multi-number variable-length handlers */
diff --git a/drivers/input/input.c b/drivers/input/input.c
index ab69820..bb24d89 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -634,78 +634,141 @@ static void input_disconnect_device(struct input_dev *dev)
spin_unlock_irq(&dev->event_lock);
}
-static int input_fetch_keycode(struct input_dev *dev, int scancode)
+/**
+ * input_scancode_to_scalar() - converts scancode in &struct input_keymap_entry
+ * @ke: keymap entry containing scancode to be converted.
+ * @scancode: pointer to the location where converted scancode should
+ * be stored.
+ *
+ * This function is used to convert scancode stored in &struct keymap_entry
+ * into scalar form understood by legacy keymap handling methods. These
+ * methods expect scancodes to be represented as 'unsigned int'.
+ */
+int input_scancode_to_scalar(const struct input_keymap_entry *ke,
+ unsigned int *scancode)
+{
+ switch (ke->len) {
+ case 1:
+ *scancode = *((u8 *)ke->scancode);
+ break;
+
+ case 2:
+ *scancode = *((u16 *)ke->scancode);
+ break;
+
+ case 4:
+ *scancode = *((u32 *)ke->scancode);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(input_scancode_to_scalar);
+
+/*
+ * Those routines handle the default case where no [gs]etkeycode() is
+ * defined. In this case, an array indexed by the scancode is used.
+ */
+
+static unsigned int input_fetch_keycode(struct input_dev *dev,
+ unsigned int index)
{
switch (dev->keycodesize) {
- case 1:
- return ((u8 *)dev->keycode)[scancode];
+ case 1:
+ return ((u8 *)dev->keycode)[index];
- case 2:
- return ((u16 *)dev->keycode)[scancode];
+ case 2:
+ return ((u16 *)dev->keycode)[index];
- default:
- return ((u32 *)dev->keycode)[scancode];
+ default:
+ return ((u32 *)dev->keycode)[index];
}
}
static int input_default_getkeycode(struct input_dev *dev,
- unsigned int scancode,
- unsigned int *keycode)
+ struct input_keymap_entry *ke)
{
+ unsigned int index;
+ int error;
+
if (!dev->keycodesize)
return -EINVAL;
- if (scancode >= dev->keycodemax)
+ if (ke->flags & INPUT_KEYMAP_BY_INDEX)
+ index = ke->index;
+ else {
+ error = input_scancode_to_scalar(ke, &index);
+ if (error)
+ return error;
+ }
+
+ if (index >= dev->keycodemax)
return -EINVAL;
- *keycode = input_fetch_keycode(dev, scancode);
+ ke->keycode = input_fetch_keycode(dev, index);
+ ke->index = index;
+ ke->len = sizeof(index);
+ memcpy(ke->scancode, &index, sizeof(index));
return 0;
}
static int input_default_setkeycode(struct input_dev *dev,
- unsigned int scancode,
- unsigned int keycode)
+ const struct input_keymap_entry *ke,
+ unsigned int *old_keycode)
{
- int old_keycode;
+ unsigned int index;
+ int error;
int i;
- if (scancode >= dev->keycodemax)
+ if (!dev->keycodesize)
return -EINVAL;
- if (!dev->keycodesize)
+ if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
+ index = ke->index;
+ } else {
+ error = input_scancode_to_scalar(ke, &index);
+ if (error)
+ return error;
+ }
+
+ if (index >= dev->keycodemax)
return -EINVAL;
- if (dev->keycodesize < sizeof(keycode) && (keycode >> (dev->keycodesize * 8)))
+ if (dev->keycodesize < sizeof(dev->keycode) &&
+ (ke->keycode >> (dev->keycodesize * 8)))
return -EINVAL;
switch (dev->keycodesize) {
case 1: {
u8 *k = (u8 *)dev->keycode;
- old_keycode = k[scancode];
- k[scancode] = keycode;
+ *old_keycode = k[index];
+ k[index] = ke->keycode;
break;
}
case 2: {
u16 *k = (u16 *)dev->keycode;
- old_keycode = k[scancode];
- k[scancode] = keycode;
+ *old_keycode = k[index];
+ k[index] = ke->keycode;
break;
}
default: {
u32 *k = (u32 *)dev->keycode;
- old_keycode = k[scancode];
- k[scancode] = keycode;
+ *old_keycode = k[index];
+ k[index] = ke->keycode;
break;
}
}
- __clear_bit(old_keycode, dev->keybit);
- __set_bit(keycode, dev->keybit);
+ __clear_bit(*old_keycode, dev->keybit);
+ __set_bit(ke->keycode, dev->keybit);
for (i = 0; i < dev->keycodemax; i++) {
- if (input_fetch_keycode(dev, i) == old_keycode) {
- __set_bit(old_keycode, dev->keybit);
+ if (input_fetch_keycode(dev, i) == *old_keycode) {
+ __set_bit(*old_keycode, dev->keybit);
break; /* Setting the bit twice is useless, so break */
}
}
@@ -716,53 +779,86 @@ static int input_default_setkeycode(struct input_dev *dev,
/**
* input_get_keycode - retrieve keycode currently mapped to a given scancode
* @dev: input device which keymap is being queried
- * @scancode: scancode (or its equivalent for device in question) for which
- * keycode is needed
- * @keycode: result
+ * @ke: keymap entry
*
* This function should be called by anyone interested in retrieving current
- * keymap. Presently keyboard and evdev handlers use it.
+ * keymap. Presently evdev handlers use it.
*/
-int input_get_keycode(struct input_dev *dev,
- unsigned int scancode, unsigned int *keycode)
+int input_get_keycode(struct input_dev *dev, struct input_keymap_entry *ke)
{
unsigned long flags;
int retval;
spin_lock_irqsave(&dev->event_lock, flags);
- retval = dev->getkeycode(dev, scancode, keycode);
- spin_unlock_irqrestore(&dev->event_lock, flags);
+ if (dev->getkeycode) {
+ /*
+ * Support for legacy drivers, that don't implement the new
+ * ioctls
+ */
+ u32 scancode = ke->index;
+
+ memcpy(ke->scancode, &scancode, sizeof(scancode));
+ ke->len = sizeof(scancode);
+ retval = dev->getkeycode(dev, scancode, &ke->keycode);
+ } else {
+ retval = dev->getkeycode_new(dev, ke);
+ }
+
+ spin_unlock_irqrestore(&dev->event_lock, flags);
return retval;
}
EXPORT_SYMBOL(input_get_keycode);
/**
- * input_get_keycode - assign new keycode to a given scancode
+ * input_set_keycode - attribute a keycode to a given scancode
* @dev: input device which keymap is being updated
- * @scancode: scancode (or its equivalent for device in question)
- * @keycode: new keycode to be assigned to the scancode
+ * @ke: new keymap entry
*
* This function should be called by anyone needing to update current
* keymap. Presently keyboard and evdev handlers use it.
*/
int input_set_keycode(struct input_dev *dev,
- unsigned int scancode, unsigned int keycode)
+ const struct input_keymap_entry *ke)
{
unsigned long flags;
unsigned int old_keycode;
int retval;
- if (keycode > KEY_MAX)
+ if (ke->keycode > KEY_MAX)
return -EINVAL;
spin_lock_irqsave(&dev->event_lock, flags);
- retval = dev->getkeycode(dev, scancode, &old_keycode);
- if (retval)
- goto out;
+ if (dev->setkeycode) {
+ /*
+ * Support for legacy drivers, that don't implement the new
+ * ioctls
+ */
+ unsigned int scancode;
+
+ retval = input_scancode_to_scalar(ke, &scancode);
+ if (retval)
+ goto out;
+
+ /*
+ * We need to know the old scancode, in order to generate a
+ * keyup effect, if the set operation happens successfully
+ */
+ if (!dev->getkeycode) {
+ retval = -EINVAL;
+ goto out;
+ }
+
+ retval = dev->getkeycode(dev, scancode, &old_keycode);
+ if (retval)
+ goto out;
+
+ retval = dev->setkeycode(dev, scancode, ke->keycode);
+ } else {
+ retval = dev->setkeycode_new(dev, ke, &old_keycode);
+ }
- retval = dev->setkeycode(dev, scancode, keycode);
if (retval)
goto out;
@@ -1759,11 +1855,11 @@ int input_register_device(struct input_dev *dev)
dev->rep[REP_PERIOD] = 33;
}
- if (!dev->getkeycode)
- dev->getkeycode = input_default_getkeycode;
+ if (!dev->getkeycode && !dev->getkeycode_new)
+ dev->getkeycode_new = input_default_getkeycode;
- if (!dev->setkeycode)
- dev->setkeycode = input_default_setkeycode;
+ if (!dev->setkeycode && !dev->setkeycode_new)
+ dev->setkeycode_new = input_default_setkeycode;
dev_set_name(&dev->dev, "input%ld",
(unsigned long) atomic_inc_return(&input_no) - 1);
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index 5f24cd6..9186b45 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -25,14 +25,56 @@
#define IR_KEYPRESS_TIMEOUT 250
/**
+ * ir_create_table() - initializes a scancode table
+ * @rc_tab: the ir_scancode_table to initialize
+ * @name: name to assign to the table
+ * @ir_type: ir type to assign to the new table
+ * @size: initial size of the table
+ * @return: zero on success or a negative error code
+ *
+ * This routine will initialize the ir_scancode_table and will allocate
+ * memory to hold at least the specified number elements.
+ */
+static int ir_create_table(struct ir_scancode_table *rc_tab,
+ const char *name, u64 ir_type, size_t size)
+{
+ rc_tab->name = name;
+ rc_tab->ir_type = ir_type;
+ rc_tab->alloc = roundup_pow_of_two(size * sizeof(struct ir_scancode));
+ rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
+ rc_tab->scan = kmalloc(rc_tab->alloc, GFP_KERNEL);
+ if (!rc_tab->scan)
+ return -ENOMEM;
+
+ IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
+ rc_tab->size, rc_tab->alloc);
+ return 0;
+}
+
+/**
+ * ir_free_table() - frees memory allocated by a scancode table
+ * @rc_tab: the table whose mappings need to be freed
+ *
+ * This routine will free memory alloctaed for key mappings used by given
+ * scancode table.
+ */
+static void ir_free_table(struct ir_scancode_table *rc_tab)
+{
+ rc_tab->size = 0;
+ kfree(rc_tab->scan);
+ rc_tab->scan = NULL;
+}
+
+/**
* ir_resize_table() - resizes a scancode table if necessary
* @rc_tab: the ir_scancode_table to resize
+ * @gfp_flags: gfp flags to use when allocating memory
* @return: zero on success or a negative error code
*
* This routine will shrink the ir_scancode_table if it has lots of
* unused entries and grow it if it is full.
*/
-static int ir_resize_table(struct ir_scancode_table *rc_tab)
+static int ir_resize_table(struct ir_scancode_table *rc_tab, gfp_t gfp_flags)
{
unsigned int oldalloc = rc_tab->alloc;
unsigned int newalloc = oldalloc;
@@ -57,7 +99,7 @@ static int ir_resize_table(struct ir_scancode_table *rc_tab)
if (newalloc == oldalloc)
return 0;
- newscan = kmalloc(newalloc, GFP_ATOMIC);
+ newscan = kmalloc(newalloc, gfp_flags);
if (!newscan) {
IR_dprintk(1, "Failed to kmalloc %u bytes\n", newalloc);
return -ENOMEM;
@@ -72,26 +114,78 @@ static int ir_resize_table(struct ir_scancode_table *rc_tab)
}
/**
- * ir_do_setkeycode() - internal function to set a keycode in the
- * scancode->keycode table
+ * ir_update_mapping() - set a keycode in the scancode->keycode table
* @dev: the struct input_dev device descriptor
- * @rc_tab: the struct ir_scancode_table to set the keycode in
- * @scancode: the scancode for the ir command
- * @keycode: the keycode for the ir command
- * @resize: whether the keytable may be shrunk
- * @return: -EINVAL if the keycode could not be inserted, otherwise zero.
+ * @rc_tab: scancode table to be adjusted
+ * @index: index of the mapping that needs to be updated
+ * @keycode: the desired keycode
+ * @return: previous keycode assigned to the mapping
+ *
+ * This routine is used to update scancode->keycopde mapping at given
+ * position.
+ */
+static unsigned int ir_update_mapping(struct input_dev *dev,
+ struct ir_scancode_table *rc_tab,
+ unsigned int index,
+ unsigned int new_keycode)
+{
+ int old_keycode = rc_tab->scan[index].keycode;
+ int i;
+
+ /* Did the user wish to remove the mapping? */
+ if (new_keycode == KEY_RESERVED || new_keycode == KEY_UNKNOWN) {
+ IR_dprintk(1, "#%d: Deleting scan 0x%04x\n",
+ index, rc_tab->scan[index].scancode);
+ rc_tab->len--;
+ memmove(&rc_tab->scan[index], &rc_tab->scan[index+ 1],
+ (rc_tab->len - index) * sizeof(struct ir_scancode));
+ } else {
+ IR_dprintk(1, "#%d: %s scan 0x%04x with key 0x%04x\n",
+ index,
+ old_keycode == KEY_RESERVED ? "New" : "Replacing",
+ rc_tab->scan[index].scancode, new_keycode);
+ rc_tab->scan[index].keycode = new_keycode;
+ __set_bit(new_keycode, dev->keybit);
+ }
+
+ if (old_keycode != KEY_RESERVED) {
+ /* A previous mapping was updated... */
+ __clear_bit(old_keycode, dev->keybit);
+ /* ... but another scancode might use the same keycode */
+ for (i = 0; i < rc_tab->len; i++) {
+ if (rc_tab->scan[i].keycode == old_keycode) {
+ __set_bit(old_keycode, dev->keybit);
+ break;
+ }
+ }
+
+ /* Possibly shrink the keytable, failure is not a problem */
+ ir_resize_table(rc_tab, GFP_ATOMIC);
+ }
+
+ return old_keycode;
+}
+
+/**
+ * ir_locate_scancode() - set a keycode in the scancode->keycode table
+ * @ir_dev: the struct ir_input_dev device descriptor
+ * @rc_tab: scancode table to be searched
+ * @scancode: the desired scancode
+ * @resize: controls whether we allowed to resize the table to
+ * accomodate not yet present scancodes
+ * @return: index of the mapping containing scancode in question
+ * or -1U in case of failure.
*
- * This routine is used internally to manipulate the scancode->keycode table.
- * The caller has to hold @rc_tab->lock.
+ * This routine is used to locate given scancode in ir_scancode_table.
+ * If scancode is not yet present the routine will allocate a new slot
+ * for it.
*/
-static int ir_do_setkeycode(struct input_dev *dev,
- struct ir_scancode_table *rc_tab,
- unsigned scancode, unsigned keycode,
- bool resize)
+static unsigned int ir_establish_scancode(struct ir_input_dev *ir_dev,
+ struct ir_scancode_table *rc_tab,
+ unsigned int scancode,
+ bool resize)
{
unsigned int i;
- int old_keycode = KEY_RESERVED;
- struct ir_input_dev *ir_dev = input_get_drvdata(dev);
/*
* Unfortunately, some hardware-based IR decoders don't provide
@@ -100,65 +194,34 @@ static int ir_do_setkeycode(struct input_dev *dev,
* the provided IR with another one, it is needed to allow loading
* IR tables from other remotes. So,
*/
- if (ir_dev->props && ir_dev->props->scanmask) {
+ if (ir_dev->props && ir_dev->props->scanmask)
scancode &= ir_dev->props->scanmask;
- }
/* First check if we already have a mapping for this ir command */
for (i = 0; i < rc_tab->len; i++) {
+ if (rc_tab->scan[i].scancode == scancode)
+ return i;
+
/* Keytable is sorted from lowest to highest scancode */
- if (rc_tab->scan[i].scancode > scancode)
+ if (rc_tab->scan[i].scancode >= scancode)
break;
- else if (rc_tab->scan[i].scancode < scancode)
- continue;
-
- old_keycode = rc_tab->scan[i].keycode;
- rc_tab->scan[i].keycode = keycode;
-
- /* Did the user wish to remove the mapping? */
- if (keycode == KEY_RESERVED || keycode == KEY_UNKNOWN) {
- IR_dprintk(1, "#%d: Deleting scan 0x%04x\n",
- i, scancode);
- rc_tab->len--;
- memmove(&rc_tab->scan[i], &rc_tab->scan[i + 1],
- (rc_tab->len - i) * sizeof(struct ir_scancode));
- }
-
- /* Possibly shrink the keytable, failure is not a problem */
- ir_resize_table(rc_tab);
- break;
}
- if (old_keycode == KEY_RESERVED && keycode != KEY_RESERVED) {
- /* No previous mapping found, we might need to grow the table */
- if (resize && ir_resize_table(rc_tab))
- return -ENOMEM;
-
- IR_dprintk(1, "#%d: New scan 0x%04x with key 0x%04x\n",
- i, scancode, keycode);
+ /* No previous mapping found, we might need to grow the table */
+ if (rc_tab->size == rc_tab->len) {
+ if (!resize || ir_resize_table(rc_tab, GFP_ATOMIC))
+ return -1U;
+ }
- /* i is the proper index to insert our new keycode */
+ /* i is the proper index to insert our new keycode */
+ if (i < rc_tab->len)
memmove(&rc_tab->scan[i + 1], &rc_tab->scan[i],
(rc_tab->len - i) * sizeof(struct ir_scancode));
- rc_tab->scan[i].scancode = scancode;
- rc_tab->scan[i].keycode = keycode;
- rc_tab->len++;
- set_bit(keycode, dev->keybit);
- } else {
- IR_dprintk(1, "#%d: Replacing scan 0x%04x with key 0x%04x\n",
- i, scancode, keycode);
- /* A previous mapping was updated... */
- clear_bit(old_keycode, dev->keybit);
- /* ...but another scancode might use the same keycode */
- for (i = 0; i < rc_tab->len; i++) {
- if (rc_tab->scan[i].keycode == old_keycode) {
- set_bit(old_keycode, dev->keybit);
- break;
- }
- }
- }
+ rc_tab->scan[i].scancode = scancode;
+ rc_tab->scan[i].keycode = KEY_RESERVED;
+ rc_tab->len++;
- return 0;
+ return i;
}
/**
@@ -171,17 +234,41 @@ static int ir_do_setkeycode(struct input_dev *dev,
* This routine is used to handle evdev EVIOCSKEY ioctl.
*/
static int ir_setkeycode(struct input_dev *dev,
- unsigned int scancode, unsigned int keycode)
+ const struct input_keymap_entry *ke,
+ unsigned int *old_keycode)
{
- int rc;
- unsigned long flags;
struct ir_input_dev *ir_dev = input_get_drvdata(dev);
struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+ unsigned int index;
+ unsigned int scancode;
+ int retval;
+ unsigned long flags;
spin_lock_irqsave(&rc_tab->lock, flags);
- rc = ir_do_setkeycode(dev, rc_tab, scancode, keycode, true);
+
+ if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
+ index = ke->index;
+ if (index >= rc_tab->len) {
+ retval = -EINVAL;
+ goto out;
+ }
+ } else {
+ retval = input_scancode_to_scalar(ke, &scancode);
+ if (retval)
+ goto out;
+
+ index = ir_establish_scancode(ir_dev, rc_tab, scancode, true);
+ if (index >= rc_tab->len) {
+ retval = -ENOMEM;
+ goto out;
+ }
+ }
+
+ *old_keycode = ir_update_mapping(dev, rc_tab, index, ke->keycode);
+
+out:
spin_unlock_irqrestore(&rc_tab->lock, flags);
- return rc;
+ return retval;
}
/**
@@ -189,32 +276,73 @@ static int ir_setkeycode(struct input_dev *dev,
* @dev: the struct input_dev device descriptor
* @to: the struct ir_scancode_table to copy entries to
* @from: the struct ir_scancode_table to copy entries from
- * @return: -EINVAL if all keycodes could not be inserted, otherwise zero.
+ * @return: -ENOMEM if all keycodes could not be inserted, otherwise zero.
*
* This routine is used to handle table initialization.
*/
-static int ir_setkeytable(struct input_dev *dev,
- struct ir_scancode_table *to,
+static int ir_setkeytable(struct ir_input_dev *ir_dev,
const struct ir_scancode_table *from)
{
- struct ir_input_dev *ir_dev = input_get_drvdata(dev);
struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
- unsigned long flags;
- unsigned int i;
- int rc = 0;
+ unsigned int i, index;
+ int rc;
+
+ rc = ir_create_table(&ir_dev->rc_tab,
+ from->name, from->ir_type, from->size);
+ if (rc)
+ return rc;
+
+ IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
+ rc_tab->size, rc_tab->alloc);
- spin_lock_irqsave(&rc_tab->lock, flags);
for (i = 0; i < from->size; i++) {
- rc = ir_do_setkeycode(dev, to, from->scan[i].scancode,
- from->scan[i].keycode, false);
- if (rc)
+ index = ir_establish_scancode(ir_dev, rc_tab,
+ from->scan[i].scancode, false);
+ if (index >= rc_tab->len) {
+ rc = -ENOMEM;
break;
+ }
+
+ ir_update_mapping(ir_dev->input_dev, rc_tab, index,
+ from->scan[i].keycode);
}
- spin_unlock_irqrestore(&rc_tab->lock, flags);
+
+ if (rc)
+ ir_free_table(rc_tab);
+
return rc;
}
/**
+ * ir_lookup_by_scancode() - locate mapping by scancode
+ * @rc_tab: the &struct ir_scancode_table to search
+ * @scancode: scancode to look for in the table
+ * @return: index in the table, -1U if not found
+ *
+ * This routine performs binary search in RC keykeymap table for
+ * given scancode.
+ */
+static unsigned int ir_lookup_by_scancode(const struct ir_scancode_table *rc_tab,
+ unsigned int scancode)
+{
+ unsigned int start = 0;
+ unsigned int end = rc_tab->len - 1;
+ unsigned int mid;
+
+ while (start <= end) {
+ mid = (start + end) / 2;
+ if (rc_tab->scan[mid].scancode < scancode)
+ start = mid + 1;
+ else if (rc_tab->scan[mid].scancode > scancode)
+ end = mid - 1;
+ else
+ return mid;
+ }
+
+ return -1U;
+}
+
+/**
* ir_getkeycode() - get a keycode from the scancode->keycode table
* @dev: the struct input_dev device descriptor
* @scancode: the desired scancode
@@ -224,36 +352,46 @@ static int ir_setkeytable(struct input_dev *dev,
* This routine is used to handle evdev EVIOCGKEY ioctl.
*/
static int ir_getkeycode(struct input_dev *dev,
- unsigned int scancode, unsigned int *keycode)
+ struct input_keymap_entry *ke)
{
- int start, end, mid;
- unsigned long flags;
- int key = KEY_RESERVED;
struct ir_input_dev *ir_dev = input_get_drvdata(dev);
struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+ struct ir_scancode *entry;
+ unsigned long flags;
+ unsigned int index;
+ unsigned int scancode;
+ int retval;
spin_lock_irqsave(&rc_tab->lock, flags);
- start = 0;
- end = rc_tab->len - 1;
- while (start <= end) {
- mid = (start + end) / 2;
- if (rc_tab->scan[mid].scancode < scancode)
- start = mid + 1;
- else if (rc_tab->scan[mid].scancode > scancode)
- end = mid - 1;
- else {
- key = rc_tab->scan[mid].keycode;
- break;
- }
+
+ if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
+ index = ke->index;
+ } else {
+ retval = input_scancode_to_scalar(ke, &scancode);
+ if (retval)
+ goto out;
+
+ index = ir_lookup_by_scancode(rc_tab, scancode);
+ }
+
+ if (index >= rc_tab->len) {
+ if (!(ke->flags & INPUT_KEYMAP_BY_INDEX))
+ IR_dprintk(1, "unknown key for scancode 0x%04x\n",
+ scancode);
+ retval = -EINVAL;
+ goto out;
}
- spin_unlock_irqrestore(&rc_tab->lock, flags);
- if (key == KEY_RESERVED)
- IR_dprintk(1, "unknown key for scancode 0x%04x\n",
- scancode);
+ entry = &rc_tab->scan[index];
- *keycode = key;
- return 0;
+ ke->index = index;
+ ke->keycode = entry->keycode;
+ ke->len = sizeof(entry->scancode);
+ memcpy(ke->scancode, &entry->scancode, sizeof(entry->scancode));
+
+out:
+ spin_unlock_irqrestore(&rc_tab->lock, flags);
+ return retval;
}
/**
@@ -268,12 +406,24 @@ static int ir_getkeycode(struct input_dev *dev,
*/
u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
{
- int keycode;
+ struct ir_input_dev *ir_dev = input_get_drvdata(dev);
+ struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+ unsigned int keycode;
+ unsigned int index;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rc_tab->lock, flags);
+
+ index = ir_lookup_by_scancode(rc_tab, scancode);
+ keycode = index < rc_tab->len ?
+ rc_tab->scan[index].keycode : KEY_RESERVED;
+
+ spin_unlock_irqrestore(&rc_tab->lock, flags);
- ir_getkeycode(dev, scancode, &keycode);
if (keycode != KEY_RESERVED)
IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
dev->name, scancode, keycode);
+
return keycode;
}
EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
@@ -454,8 +604,8 @@ int __ir_input_register(struct input_dev *input_dev,
goto out_dev;
}
- input_dev->getkeycode = ir_getkeycode;
- input_dev->setkeycode = ir_setkeycode;
+ input_dev->getkeycode_new = ir_getkeycode;
+ input_dev->setkeycode_new = ir_setkeycode;
input_set_drvdata(input_dev, ir_dev);
ir_dev->input_dev = input_dev;
@@ -463,12 +613,6 @@ int __ir_input_register(struct input_dev *input_dev,
spin_lock_init(&ir_dev->keylock);
setup_timer(&ir_dev->timer_keyup, ir_timer_keyup, (unsigned long)ir_dev);
- ir_dev->rc_tab.name = rc_tab->name;
- ir_dev->rc_tab.ir_type = rc_tab->ir_type;
- ir_dev->rc_tab.alloc = roundup_pow_of_two(rc_tab->size *
- sizeof(struct ir_scancode));
- ir_dev->rc_tab.scan = kmalloc(ir_dev->rc_tab.alloc, GFP_KERNEL);
- ir_dev->rc_tab.size = ir_dev->rc_tab.alloc / sizeof(struct ir_scancode);
if (props) {
ir_dev->props = props;
if (props->open)
@@ -477,23 +621,14 @@ int __ir_input_register(struct input_dev *input_dev,
input_dev->close = ir_close;
}
- if (!ir_dev->rc_tab.scan) {
- rc = -ENOMEM;
- goto out_name;
- }
-
- IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
- ir_dev->rc_tab.size, ir_dev->rc_tab.alloc);
-
set_bit(EV_KEY, input_dev->evbit);
set_bit(EV_REP, input_dev->evbit);
set_bit(EV_MSC, input_dev->evbit);
set_bit(MSC_SCAN, input_dev->mscbit);
- if (ir_setkeytable(input_dev, &ir_dev->rc_tab, rc_tab)) {
- rc = -ENOMEM;
- goto out_table;
- }
+ rc = ir_setkeytable(ir_dev, rc_tab);
+ if (rc)
+ goto out_name;
rc = ir_register_class(input_dev);
if (rc < 0)
@@ -527,7 +662,7 @@ int __ir_input_register(struct input_dev *input_dev,
out_event:
ir_unregister_class(input_dev);
out_table:
- kfree(ir_dev->rc_tab.scan);
+ ir_free_table(&ir_dev->rc_tab);
out_name:
kfree(ir_dev->driver_name);
out_dev:
@@ -545,7 +680,6 @@ EXPORT_SYMBOL_GPL(__ir_input_register);
void ir_input_unregister(struct input_dev *input_dev)
{
struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- struct ir_scancode_table *rc_tab;
if (!ir_dev)
return;
@@ -557,10 +691,7 @@ void ir_input_unregister(struct input_dev *input_dev)
if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
ir_raw_event_unregister(input_dev);
- rc_tab = &ir_dev->rc_tab;
- rc_tab->size = 0;
- kfree(rc_tab->scan);
- rc_tab->scan = NULL;
+ ir_free_table(&ir_dev->rc_tab);
ir_unregister_class(input_dev);
diff --git a/include/linux/input.h b/include/linux/input.h
index 896a922..64cf0eb 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -34,7 +34,7 @@ struct input_event {
* Protocol version.
*/
-#define EV_VERSION 0x010000
+#define EV_VERSION 0x010001
/*
* IOCTLs (0x00 - 0x7f)
@@ -56,12 +56,37 @@ struct input_absinfo {
__s32 resolution;
};
+/**
+ * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls
+ * @scancode: scancode represented in machine-endian form.
+ * @len: length of the scancode that resides in @scancode buffer.
+ * @index: index in the keymap, may be used instead of scancode
+ * @flags: allows to specify how kernel should handle the request. For
+ * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel
+ * should perform lookup in keymap by @index instead of @scancode
+ * @keycode: key code assigned to this scancode
+ *
+ * The structure is used to retrieve and modify keymap data. Users have
+ * option of performing lookup either by @scancode itself or by @index
+ * in keymap entry. EVIOCGKEYCODE will also return scancode or index
+ * (depending on which element was used to perform lookup).
+ */
+struct input_keymap_entry {
+#define INPUT_KEYMAP_BY_INDEX (1 << 0)
+ __u8 flags;
+ __u8 len;
+ __u16 index;
+ __u32 keycode;
+ __u8 scancode[32];
+};
+
#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */
#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */
#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */
#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */
-#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */
-#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */
+
+#define EVIOCGKEYCODE _IOR('E', 0x04, struct input_keymap_entry) /* get keycode */
+#define EVIOCSKEYCODE _IOW('E', 0x04, struct input_keymap_entry) /* set keycode */
#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */
#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */
@@ -73,8 +98,8 @@ struct input_absinfo {
#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */
#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + ev, len) /* get event bits */
-#define EVIOCGABS(abs) _IOR('E', 0x40 + abs, struct input_absinfo) /* get abs value/limits */
-#define EVIOCSABS(abs) _IOW('E', 0xc0 + abs, struct input_absinfo) /* set abs value/limits */
+#define EVIOCGABS(abs) _IOR('E', 0x40 + abs, struct input_absinfo) /* get abs value/limits */
+#define EVIOCSABS(abs) _IOW('E', 0xc0 + abs, struct input_absinfo) /* set abs value/limits */
#define EVIOCSFF _IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect)) /* send a force effect to a force feedback device */
#define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */
@@ -1088,13 +1113,13 @@ struct input_mt_slot {
* @keycodemax: size of keycode table
* @keycodesize: size of elements in keycode table
* @keycode: map of scancodes to keycodes for this device
+ * @getkeycode: optional legacy method to retrieve current keymap.
* @setkeycode: optional method to alter current keymap, used to implement
* sparse keymaps. If not supplied default mechanism will be used.
* The method is being called while holding event_lock and thus must
* not sleep
- * @getkeycode: optional method to retrieve current keymap. If not supplied
- * default mechanism will be used. The method is being called while
- * holding event_lock and thus must not sleep
+ * @getkeycode_new: transition method
+ * @setkeycode_new: transition method
* @ff: force feedback structure associated with the device if device
* supports force feedback effects
* @repeat_key: stores key code of the last key pressed; used to implement
@@ -1168,10 +1193,16 @@ struct input_dev {
unsigned int keycodemax;
unsigned int keycodesize;
void *keycode;
+
int (*setkeycode)(struct input_dev *dev,
unsigned int scancode, unsigned int keycode);
int (*getkeycode)(struct input_dev *dev,
unsigned int scancode, unsigned int *keycode);
+ int (*setkeycode_new)(struct input_dev *dev,
+ const struct input_keymap_entry *ke,
+ unsigned int *old_keycode);
+ int (*getkeycode_new)(struct input_dev *dev,
+ struct input_keymap_entry *ke);
struct ff_device *ff;
@@ -1478,10 +1509,12 @@ INPUT_GENERATE_ABS_ACCESSORS(fuzz, fuzz)
INPUT_GENERATE_ABS_ACCESSORS(flat, flat)
INPUT_GENERATE_ABS_ACCESSORS(res, resolution)
-int input_get_keycode(struct input_dev *dev,
- unsigned int scancode, unsigned int *keycode);
+int input_scancode_to_scalar(const struct input_keymap_entry *ke,
+ unsigned int *scancode);
+
+int input_get_keycode(struct input_dev *dev, struct input_keymap_entry *ke);
int input_set_keycode(struct input_dev *dev,
- unsigned int scancode, unsigned int keycode);
+ const struct input_keymap_entry *ke);
extern struct class input_class;
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 25883cf..e0f17ed 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -36,7 +36,7 @@ struct ir_scancode_table {
unsigned int len; /* Used number of entries */
unsigned int alloc; /* Size of *scan in bytes */
u64 ir_type;
- char *name;
+ const char *name;
spinlock_t lock;
};
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH 2/7] ir-core: convert drivers/media/video/cx88 to ir-core
2010-10-29 19:07 [PATCH 0/7] rc-core: ir-core to rc-core conversion David Härdeman
2010-10-29 19:07 ` [PATCH 1/7] ir-core: dummy patch to base my work on top of Dmitry's large scancode work David Härdeman
@ 2010-10-29 19:08 ` David Härdeman
2010-11-02 15:57 ` Jarod Wilson
2010-10-29 19:08 ` [PATCH 3/7] ir-core: remove remaining users of the ir-functions keyhandlers David Härdeman
` (6 subsequent siblings)
8 siblings, 1 reply; 18+ messages in thread
From: David Härdeman @ 2010-10-29 19:08 UTC (permalink / raw)
To: linux-media; +Cc: jarod, mchehab
This patch converts the cx88 driver (for sampling hw) to use the
decoders provided by ir-core instead of the separate ones provided
by ir-functions (and gets rid of those).
The value for MO_DDS_IO had a comment saying it corresponded to
a 4kHz samplerate. That comment was unfortunately misleading. The
actual samplerate was something like 3250Hz.
The current value has been derived by analyzing the elapsed time
between interrupts for different values (knowing that each interrupt
corresponds to 32 samples).
Thanks to Mariusz Bialonczyk <manio@skyboo.net> for testing my patches
(about one a day for two weeks!) on actual hardware.
Signed-off-by: David Härdeman <david@hardeman.nu>
---
drivers/media/IR/ir-functions.c | 134 ---------------------------
drivers/media/video/cx88/Kconfig | 2
drivers/media/video/cx88/cx88-input.c | 163 +++++++--------------------------
include/media/ir-common.h | 3 -
4 files changed, 37 insertions(+), 265 deletions(-)
diff --git a/drivers/media/IR/ir-functions.c b/drivers/media/IR/ir-functions.c
index db591e4..f4c4115 100644
--- a/drivers/media/IR/ir-functions.c
+++ b/drivers/media/IR/ir-functions.c
@@ -111,140 +111,6 @@ u32 ir_extract_bits(u32 data, u32 mask)
}
EXPORT_SYMBOL_GPL(ir_extract_bits);
-static int inline getbit(u32 *samples, int bit)
-{
- return (samples[bit/32] & (1 << (31-(bit%32)))) ? 1 : 0;
-}
-
-/* sump raw samples for visual debugging ;) */
-int ir_dump_samples(u32 *samples, int count)
-{
- int i, bit, start;
-
- printk(KERN_DEBUG "ir samples: ");
- start = 0;
- for (i = 0; i < count * 32; i++) {
- bit = getbit(samples,i);
- if (bit)
- start = 1;
- if (0 == start)
- continue;
- printk("%s", bit ? "#" : "_");
- }
- printk("\n");
- return 0;
-}
-EXPORT_SYMBOL_GPL(ir_dump_samples);
-
-/* decode raw samples, pulse distance coding used by NEC remotes */
-int ir_decode_pulsedistance(u32 *samples, int count, int low, int high)
-{
- int i,last,bit,len;
- u32 curBit;
- u32 value;
-
- /* find start burst */
- for (i = len = 0; i < count * 32; i++) {
- bit = getbit(samples,i);
- if (bit) {
- len++;
- } else {
- if (len >= 29)
- break;
- len = 0;
- }
- }
-
- /* start burst to short */
- if (len < 29)
- return 0xffffffff;
-
- /* find start silence */
- for (len = 0; i < count * 32; i++) {
- bit = getbit(samples,i);
- if (bit) {
- break;
- } else {
- len++;
- }
- }
-
- /* silence to short */
- if (len < 7)
- return 0xffffffff;
-
- /* go decoding */
- len = 0;
- last = 1;
- value = 0; curBit = 1;
- for (; i < count * 32; i++) {
- bit = getbit(samples,i);
- if (last) {
- if(bit) {
- continue;
- } else {
- len = 1;
- }
- } else {
- if (bit) {
- if (len > (low + high) /2)
- value |= curBit;
- curBit <<= 1;
- if (curBit == 1)
- break;
- } else {
- len++;
- }
- }
- last = bit;
- }
-
- return value;
-}
-EXPORT_SYMBOL_GPL(ir_decode_pulsedistance);
-
-/* decode raw samples, biphase coding, used by rc5 for example */
-int ir_decode_biphase(u32 *samples, int count, int low, int high)
-{
- int i,last,bit,len,flips;
- u32 value;
-
- /* find start bit (1) */
- for (i = 0; i < 32; i++) {
- bit = getbit(samples,i);
- if (bit)
- break;
- }
-
- /* go decoding */
- len = 0;
- flips = 0;
- value = 1;
- for (; i < count * 32; i++) {
- if (len > high)
- break;
- if (flips > 1)
- break;
- last = bit;
- bit = getbit(samples,i);
- if (last == bit) {
- len++;
- continue;
- }
- if (len < low) {
- len++;
- flips++;
- continue;
- }
- value <<= 1;
- value |= bit;
- flips = 0;
- len = 1;
- }
- return value;
-}
-EXPORT_SYMBOL_GPL(ir_decode_biphase);
-
/* RC5 decoding stuff, moved from bttv-input.c to share it with
* saa7134 */
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index 0fa85cb..bcfd1ac 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_CX88
tristate "Conexant 2388x (bt878 successor) support"
- depends on VIDEO_DEV && PCI && I2C && INPUT
+ depends on VIDEO_DEV && PCI && I2C && INPUT && IR_CORE
select I2C_ALGOBIT
select VIDEO_BTCX
select VIDEOBUF_DMA_SG
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index fc777bc..436ace8 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -41,7 +41,6 @@ struct cx88_IR {
struct cx88_core *core;
struct input_dev *input;
struct ir_dev_props props;
- u64 ir_type;
int users;
@@ -50,8 +49,6 @@ struct cx88_IR {
/* sample from gpio pin 16 */
u32 sampling;
- u32 samples[16];
- int scount;
/* poll external decoder */
int polling;
@@ -63,6 +60,10 @@ struct cx88_IR {
u32 mask_keyup;
};
+static unsigned ir_samplerate = 4;
+module_param(ir_samplerate, uint, 0444);
+MODULE_PARM_DESC(ir_samplerate, "IR samplerate in kHz, 1 - 20, default 4");
+
static int ir_debug;
module_param(ir_debug, int, 0644); /* debug level [IR] */
MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
@@ -176,8 +177,8 @@ static int __cx88_ir_start(void *priv)
}
if (ir->sampling) {
core->pci_irqmask |= PCI_INT_IR_SMPINT;
- cx_write(MO_DDS_IO, 0xa80a80); /* 4 kHz sample rate */
- cx_write(MO_DDSCFG_IO, 0x5); /* enable */
+ cx_write(MO_DDS_IO, 0x33F286 * ir_samplerate); /* samplerate */
+ cx_write(MO_DDSCFG_IO, 0x5); /* enable */
}
return 0;
}
@@ -264,7 +265,6 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
break;
case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
ir_codes = RC_MAP_CINERGY_1400;
- ir_type = IR_TYPE_NEC;
ir->sampling = 0xeb04; /* address */
break;
case CX88_BOARD_HAUPPAUGE:
@@ -279,7 +279,6 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
case CX88_BOARD_PCHDTV_HD5500:
case CX88_BOARD_HAUPPAUGE_IRONLY:
ir_codes = RC_MAP_HAUPPAUGE_NEW;
- ir_type = IR_TYPE_RC5;
ir->sampling = 1;
break;
case CX88_BOARD_WINFAST_DTV2000H:
@@ -367,18 +366,15 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
case CX88_BOARD_PROF_7301:
case CX88_BOARD_PROF_6200:
ir_codes = RC_MAP_TBS_NEC;
- ir_type = IR_TYPE_NEC;
ir->sampling = 0xff00; /* address */
break;
case CX88_BOARD_TEVII_S460:
case CX88_BOARD_TEVII_S420:
ir_codes = RC_MAP_TEVII_NEC;
- ir_type = IR_TYPE_NEC;
ir->sampling = 0xff00; /* address */
break;
case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
ir_codes = RC_MAP_DNTV_LIVE_DVBT_PRO;
- ir_type = IR_TYPE_NEC;
ir->sampling = 0xff00; /* address */
break;
case CX88_BOARD_NORWOOD_MICRO:
@@ -396,7 +392,6 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
break;
case CX88_BOARD_PINNACLE_PCTV_HD_800i:
ir_codes = RC_MAP_PINNACLE_PCTV_HD;
- ir_type = IR_TYPE_RC5;
ir->sampling = 1;
break;
case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
@@ -412,7 +407,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
break;
}
- if (NULL == ir_codes) {
+ if (!ir_codes) {
err = -ENODEV;
goto err_out_free;
}
@@ -436,8 +431,6 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
snprintf(ir->name, sizeof(ir->name), "cx88 IR (%s)", core->board.name);
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci));
- ir->ir_type = ir_type;
-
input_dev->name = ir->name;
input_dev->phys = ir->phys;
input_dev->id.bustype = BUS_PCI;
@@ -454,10 +447,18 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
ir->core = core;
core->ir = ir;
+ if (ir->sampling) {
+ ir_type = IR_TYPE_ALL;
+ ir->props.driver_type = RC_DRIVER_IR_RAW;
+ ir->props.timeout = 10 * 1000 * 1000; /* 10 ms */
+ } else
+ ir->props.driver_type = RC_DRIVER_SCANCODE;
+
ir->props.priv = core;
ir->props.open = cx88_ir_open;
ir->props.close = cx88_ir_close;
ir->props.scanmask = hardware_mask;
+ ir->props.allowed_protos = ir_type;
/* all done */
err = ir_input_register(ir->input, ir_codes, &ir->props, MODULE_NAME);
@@ -494,128 +495,36 @@ int cx88_ir_fini(struct cx88_core *core)
void cx88_ir_irq(struct cx88_core *core)
{
struct cx88_IR *ir = core->ir;
- u32 samples, ircode;
- int i, start, range, toggle, dev, code;
+ u32 samples;
+ unsigned todo, bits;
+ struct ir_raw_event ev;
+ struct ir_input_dev *irdev;
- if (NULL == ir)
- return;
- if (!ir->sampling)
+ if (!ir || !ir->sampling)
return;
+ /*
+ * Samples are stored in a 32 bit register, oldest sample in
+ * the msb. A set bit represents space and an unset bit
+ * represents a pulse.
+ */
samples = cx_read(MO_SAMPLE_IO);
- if (0 != samples && 0xffffffff != samples) {
- /* record sample data */
- if (ir->scount < ARRAY_SIZE(ir->samples))
- ir->samples[ir->scount++] = samples;
- return;
- }
- if (!ir->scount) {
- /* nothing to sample */
- return;
- }
-
- /* have a complete sample */
- if (ir->scount < ARRAY_SIZE(ir->samples))
- ir->samples[ir->scount++] = samples;
- for (i = 0; i < ir->scount; i++)
- ir->samples[i] = ~ir->samples[i];
- if (ir_debug)
- ir_dump_samples(ir->samples, ir->scount);
-
- /* decode it */
- switch (core->boardnr) {
- case CX88_BOARD_TEVII_S460:
- case CX88_BOARD_TEVII_S420:
- case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
- case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
- case CX88_BOARD_OMICOM_SS4_PCI:
- case CX88_BOARD_SATTRADE_ST4200:
- case CX88_BOARD_TBS_8920:
- case CX88_BOARD_TBS_8910:
- case CX88_BOARD_PROF_7300:
- case CX88_BOARD_PROF_7301:
- case CX88_BOARD_PROF_6200:
- case CX88_BOARD_TWINHAN_VP1027_DVBS:
- ircode = ir_decode_pulsedistance(ir->samples, ir->scount, 1, 4);
-
- if (ircode == 0xffffffff) { /* decoding error */
- ir_dprintk("pulse distance decoding error\n");
- break;
- }
-
- ir_dprintk("pulse distance decoded: %x\n", ircode);
+ irdev = input_get_drvdata(ir->input);
- if (ircode == 0) { /* key still pressed */
- ir_dprintk("pulse distance decoded repeat code\n");
- ir_repeat(ir->input);
- break;
- }
-
- if ((ircode & 0xffff) != (ir->sampling & 0xffff)) { /* wrong address */
- ir_dprintk("pulse distance decoded wrong address\n");
- break;
- }
-
- if (((~ircode >> 24) & 0xff) != ((ircode >> 16) & 0xff)) { /* wrong checksum */
- ir_dprintk("pulse distance decoded wrong check sum\n");
- break;
- }
+ if (samples == 0xff && irdev->idle)
+ return;
- ir_dprintk("Key Code: %x\n", (ircode >> 16) & 0xff);
- ir_keydown(ir->input, (ircode >> 16) & 0xff, 0);
- break;
- case CX88_BOARD_HAUPPAUGE:
- case CX88_BOARD_HAUPPAUGE_DVB_T1:
- case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
- case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
- case CX88_BOARD_HAUPPAUGE_HVR1100:
- case CX88_BOARD_HAUPPAUGE_HVR3000:
- case CX88_BOARD_HAUPPAUGE_HVR4000:
- case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
- case CX88_BOARD_PCHDTV_HD3000:
- case CX88_BOARD_PCHDTV_HD5500:
- case CX88_BOARD_HAUPPAUGE_IRONLY:
- ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
- ir_dprintk("biphase decoded: %x\n", ircode);
- /*
- * RC5 has an extension bit which adds a new range
- * of available codes, this is detected here. Also
- * hauppauge remotes (black/silver) always use
- * specific device ids. If we do not filter the
- * device ids then messages destined for devices
- * such as TVs (id=0) will get through to the
- * device causing mis-fired events.
- */
- /* split rc5 data block ... */
- start = (ircode & 0x2000) >> 13;
- range = (ircode & 0x1000) >> 12;
- toggle= (ircode & 0x0800) >> 11;
- dev = (ircode & 0x07c0) >> 6;
- code = (ircode & 0x003f) | ((range << 6) ^ 0x0040);
- if( start != 1)
- /* no key pressed */
- break;
- if ( dev != 0x1e && dev != 0x1f )
- /* not a hauppauge remote */
- break;
- ir_keydown(ir->input, code, toggle);
- break;
- case CX88_BOARD_PINNACLE_PCTV_HD_800i:
- ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
- ir_dprintk("biphase decoded: %x\n", ircode);
- if ((ircode & 0xfffff000) != 0x3000)
- break;
- /* Note: bit 0x800 being the toggle is assumed, not checked
- with real hardware */
- ir_keydown(ir->input, ircode & 0x3f, ircode & 0x0800 ? 1 : 0);
- break;
+ init_ir_raw_event(&ev);
+ for (todo = 32; todo > 0; todo -= bits) {
+ ev.pulse = samples & 0x80000000 ? false : true;
+ bits = min(todo, 32U - fls(ev.pulse ? samples : ~samples));
+ ev.duration = (bits * NSEC_PER_SEC) / (1000 * ir_samplerate);
+ ir_raw_event_store_with_filter(ir->input, &ev);
+ samples <<= bits;
}
-
- ir->scount = 0;
- return;
+ ir_raw_event_handle(ir->input);
}
-
void cx88_i2c_init_ir(struct cx88_core *core)
{
struct i2c_board_info info;
diff --git a/include/media/ir-common.h b/include/media/ir-common.h
index 528050e..4152420 100644
--- a/include/media/ir-common.h
+++ b/include/media/ir-common.h
@@ -96,9 +96,6 @@ void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir);
void ir_input_keydown(struct input_dev *dev, struct ir_input_state *ir,
u32 ir_key);
u32 ir_extract_bits(u32 data, u32 mask);
-int ir_dump_samples(u32 *samples, int count);
-int ir_decode_biphase(u32 *samples, int count, int low, int high);
-int ir_decode_pulsedistance(u32 *samples, int count, int low, int high);
u32 ir_rc5_decode(unsigned int code);
void ir_rc5_timer_end(unsigned long data);
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH 2/7] ir-core: convert drivers/media/video/cx88 to ir-core
2010-10-29 19:08 ` [PATCH 2/7] ir-core: convert drivers/media/video/cx88 to ir-core David Härdeman
@ 2010-11-02 15:57 ` Jarod Wilson
0 siblings, 0 replies; 18+ messages in thread
From: Jarod Wilson @ 2010-11-02 15:57 UTC (permalink / raw)
To: David Härdeman; +Cc: linux-media, mchehab
On Fri, Oct 29, 2010 at 3:08 PM, David Härdeman <david@hardeman.nu> wrote:
> This patch converts the cx88 driver (for sampling hw) to use the
> decoders provided by ir-core instead of the separate ones provided
> by ir-functions (and gets rid of those).
>
> The value for MO_DDS_IO had a comment saying it corresponded to
> a 4kHz samplerate. That comment was unfortunately misleading. The
> actual samplerate was something like 3250Hz.
>
> The current value has been derived by analyzing the elapsed time
> between interrupts for different values (knowing that each interrupt
> corresponds to 32 samples).
>
> Thanks to Mariusz Bialonczyk <manio@skyboo.net> for testing my patches
> (about one a day for two weeks!) on actual hardware.
>
> Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Jarod Wilson <jarod@redhat.com>
--
Jarod Wilson
jarod@wilsonet.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 3/7] ir-core: remove remaining users of the ir-functions keyhandlers
2010-10-29 19:07 [PATCH 0/7] rc-core: ir-core to rc-core conversion David Härdeman
2010-10-29 19:07 ` [PATCH 1/7] ir-core: dummy patch to base my work on top of Dmitry's large scancode work David Härdeman
2010-10-29 19:08 ` [PATCH 2/7] ir-core: convert drivers/media/video/cx88 to ir-core David Härdeman
@ 2010-10-29 19:08 ` David Härdeman
2010-11-02 15:59 ` Jarod Wilson
2010-10-29 19:08 ` [PATCH 4/7] ir-core: more cleanups of ir-functions.c David Härdeman
` (5 subsequent siblings)
8 siblings, 1 reply; 18+ messages in thread
From: David Härdeman @ 2010-10-29 19:08 UTC (permalink / raw)
To: linux-media; +Cc: jarod, mchehab
This patch removes the remaining usages of the ir_input_nokey() and
ir_input_keydown() functions provided by drivers/media/IR/ir-functions.c
by using the corresponding functionality in ir-core instead.
Signed-off-by: David Härdeman <david@hardeman.nu>
---
drivers/media/IR/imon.c | 9 --
drivers/media/IR/ir-functions.c | 101 ++-----------------------
drivers/media/IR/ir-keytable.c | 110 ++++++++++++++++++++-------
drivers/media/video/bt8xx/bttv-input.c | 32 ++------
drivers/media/video/bt8xx/bttvp.h | 1
drivers/media/video/cx88/cx88-input.c | 11 ++-
drivers/media/video/ir-kbd-i2c.c | 3 -
drivers/media/video/saa7134/saa7134-input.c | 49 ++----------
drivers/staging/tm6000/tm6000-input.c | 15 +---
include/media/ir-common.h | 31 +-------
include/media/ir-core.h | 3 -
include/media/ir-kbd-i2c.h | 4 -
12 files changed, 133 insertions(+), 236 deletions(-)
diff --git a/drivers/media/IR/imon.c b/drivers/media/IR/imon.c
index f782a9d..68699d4 100644
--- a/drivers/media/IR/imon.c
+++ b/drivers/media/IR/imon.c
@@ -1477,17 +1477,12 @@ static void imon_incoming_packet(struct imon_context *ictx,
bool norelease = false;
int i;
u64 scancode;
- struct input_dev *rdev = NULL;
- struct ir_input_dev *irdev = NULL;
int press_type = 0;
int msec;
struct timeval t;
static struct timeval prev_time = { 0, 0 };
u8 ktype;
- rdev = ictx->rdev;
- irdev = input_get_drvdata(rdev);
-
/* filter out junk data on the older 0xffdc imon devices */
if ((buf[0] == 0xff) && (buf[1] == 0xff) && (buf[2] == 0xff))
return;
@@ -1568,9 +1563,9 @@ static void imon_incoming_packet(struct imon_context *ictx,
if (ktype != IMON_KEY_PANEL) {
if (press_type == 0)
- ir_keyup(irdev);
+ ir_keyup(ictx->rdev);
else {
- ir_keydown(rdev, ictx->rc_scancode, ictx->rc_toggle);
+ ir_keydown(ictx->rdev, ictx->rc_scancode, ictx->rc_toggle);
spin_lock_irqsave(&ictx->kc_lock, flags);
ictx->last_keycode = ictx->kc;
spin_unlock_irqrestore(&ictx->kc_lock, flags);
diff --git a/drivers/media/IR/ir-functions.c b/drivers/media/IR/ir-functions.c
index f4c4115..fca734c 100644
--- a/drivers/media/IR/ir-functions.c
+++ b/drivers/media/IR/ir-functions.c
@@ -1,7 +1,7 @@
/*
- *
- * some common structs and functions to handle infrared remotes via
- * input layer ...
+ * some common functions to handle infrared remote protocol decoding for
+ * drivers which have not yet been (or can't be) converted to use the
+ * regular protocol decoders...
*
* (c) 2003 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
*
@@ -31,67 +31,6 @@
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
MODULE_LICENSE("GPL");
-static int repeat = 1;
-module_param(repeat, int, 0444);
-MODULE_PARM_DESC(repeat,"auto-repeat for IR keys (default: on)");
-
-/* -------------------------------------------------------------------------- */
-
-static void ir_input_key_event(struct input_dev *dev, struct ir_input_state *ir)
-{
- if (KEY_RESERVED == ir->keycode) {
- printk(KERN_INFO "%s: unknown key: key=0x%02x down=%d\n",
- dev->name, ir->ir_key, ir->keypressed);
- return;
- }
- IR_dprintk(1,"%s: key event code=%d down=%d\n",
- dev->name,ir->keycode,ir->keypressed);
- input_report_key(dev,ir->keycode,ir->keypressed);
- input_sync(dev);
-}
-
-/* -------------------------------------------------------------------------- */
-
-int ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
- const u64 ir_type)
-{
- ir->ir_type = ir_type;
-
- if (repeat)
- set_bit(EV_REP, dev->evbit);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(ir_input_init);
-
-
-void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir)
-{
- if (ir->keypressed) {
- ir->keypressed = 0;
- ir_input_key_event(dev,ir);
- }
-}
-EXPORT_SYMBOL_GPL(ir_input_nokey);
-
-void ir_input_keydown(struct input_dev *dev, struct ir_input_state *ir,
- u32 ir_key)
-{
- u32 keycode = ir_g_keycode_from_table(dev, ir_key);
-
- if (ir->keypressed && ir->keycode != keycode) {
- ir->keypressed = 0;
- ir_input_key_event(dev,ir);
- }
- if (!ir->keypressed) {
- ir->ir_key = ir_key;
- ir->keycode = keycode;
- ir->keypressed = 1;
- ir_input_key_event(dev,ir);
- }
-}
-EXPORT_SYMBOL_GPL(ir_input_keydown);
-
/* -------------------------------------------------------------------------- */
/* extract mask bits out of data and pack them into the result */
u32 ir_extract_bits(u32 data, u32 mask)
@@ -115,7 +54,7 @@ EXPORT_SYMBOL_GPL(ir_extract_bits);
* saa7134 */
/* decode raw bit pattern to RC5 code */
-u32 ir_rc5_decode(unsigned int code)
+static u32 ir_rc5_decode(unsigned int code)
{
unsigned int org_code = code;
unsigned int pair;
@@ -144,13 +83,12 @@ u32 ir_rc5_decode(unsigned int code)
RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
return rc5;
}
-EXPORT_SYMBOL_GPL(ir_rc5_decode);
void ir_rc5_timer_end(unsigned long data)
{
struct card_ir *ir = (struct card_ir *)data;
struct timeval tv;
- unsigned long current_jiffies, timeout;
+ unsigned long current_jiffies;
u32 gap;
u32 rc5 = 0;
@@ -191,32 +129,11 @@ void ir_rc5_timer_end(unsigned long data)
u32 toggle = RC5_TOGGLE(rc5);
u32 instr = RC5_INSTR(rc5);
- /* Good code, decide if repeat/repress */
- if (toggle != RC5_TOGGLE(ir->last_rc5) ||
- instr != RC5_INSTR(ir->last_rc5)) {
- IR_dprintk(1, "ir-common: instruction %x, toggle %x\n", instr,
- toggle);
- ir_input_nokey(ir->dev, &ir->ir);
- ir_input_keydown(ir->dev, &ir->ir, instr);
- }
-
- /* Set/reset key-up timer */
- timeout = current_jiffies +
- msecs_to_jiffies(ir->rc5_key_timeout);
- mod_timer(&ir->timer_keyup, timeout);
-
- /* Save code for repeat test */
- ir->last_rc5 = rc5;
+ /* Good code */
+ ir_keydown(ir->dev, instr, toggle);
+ IR_dprintk(1, "ir-common: instruction %x, toggle %x\n",
+ instr, toggle);
}
}
}
EXPORT_SYMBOL_GPL(ir_rc5_timer_end);
-
-void ir_rc5_timer_keyup(unsigned long data)
-{
- struct card_ir *ir = (struct card_ir *)data;
-
- IR_dprintk(1, "ir-common: key released\n");
- ir_input_nokey(ir->dev, &ir->ir);
-}
-EXPORT_SYMBOL_GPL(ir_rc5_timer_keyup);
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index 9186b45..f869799 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -429,13 +429,13 @@ u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
/**
- * ir_keyup() - generates input event to cleanup a key press
+ * ir_do_keyup() - internal function to signal the release of a keypress
* @ir: the struct ir_input_dev descriptor of the device
*
- * This routine is used to signal that a key has been released on the
- * remote control. It reports a keyup input event via input_report_key().
+ * This function is used internally to release a keypress, it must be
+ * called with keylock held.
*/
-void ir_keyup(struct ir_input_dev *ir)
+static void ir_do_keyup(struct ir_input_dev *ir)
{
if (!ir->keypressed)
return;
@@ -445,6 +445,23 @@ void ir_keyup(struct ir_input_dev *ir)
input_sync(ir->input_dev);
ir->keypressed = false;
}
+
+/**
+ * ir_keyup() - generates input event to signal the release of a keypress
+ * @dev: the struct input_dev descriptor of the device
+ *
+ * This routine is used to signal that a key has been released on the
+ * remote control.
+ */
+void ir_keyup(struct input_dev *dev)
+{
+ unsigned long flags;
+ struct ir_input_dev *ir = input_get_drvdata(dev);
+
+ spin_lock_irqsave(&ir->keylock, flags);
+ ir_do_keyup(ir);
+ spin_unlock_irqrestore(&ir->keylock, flags);
+}
EXPORT_SYMBOL_GPL(ir_keyup);
/**
@@ -471,7 +488,7 @@ static void ir_timer_keyup(unsigned long cookie)
*/
spin_lock_irqsave(&ir->keylock, flags);
if (time_is_before_eq_jiffies(ir->keyup_jiffies))
- ir_keyup(ir);
+ ir_do_keyup(ir);
spin_unlock_irqrestore(&ir->keylock, flags);
}
@@ -504,44 +521,37 @@ out:
EXPORT_SYMBOL_GPL(ir_repeat);
/**
- * ir_keydown() - generates input event for a key press
+ * ir_do_keydown() - internal function to process a keypress
* @dev: the struct input_dev descriptor of the device
- * @scancode: the scancode that we're seeking
- * @toggle: the toggle value (protocol dependent, if the protocol doesn't
- * support toggle values, this should be set to zero)
+ * @scancode: the scancode of the keypress
+ * @keycode: the keycode of the keypress
+ * @toggle: the toggle value of the keypress
*
- * This routine is used by the input routines when a key is pressed at the
- * IR. It gets the keycode for a scancode and reports an input event via
- * input_report_key().
+ * This function is used internally to register a keypress, it must be
+ * called with keylock held.
*/
-void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
+static void ir_do_keydown(struct input_dev *dev, int scancode,
+ u32 keycode, u8 toggle)
{
- unsigned long flags;
struct ir_input_dev *ir = input_get_drvdata(dev);
- u32 keycode = ir_g_keycode_from_table(dev, scancode);
-
- spin_lock_irqsave(&ir->keylock, flags);
-
input_event(dev, EV_MSC, MSC_SCAN, scancode);
/* Repeat event? */
if (ir->keypressed &&
ir->last_scancode == scancode &&
ir->last_toggle == toggle)
- goto set_timer;
+ return;
/* Release old keypress */
- ir_keyup(ir);
+ ir_do_keyup(ir);
ir->last_scancode = scancode;
ir->last_toggle = toggle;
ir->last_keycode = keycode;
-
if (keycode == KEY_RESERVED)
- goto out;
-
+ return;
/* Register a keypress */
ir->keypressed = true;
@@ -549,15 +559,61 @@ void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
dev->name, keycode, scancode);
input_report_key(dev, ir->last_keycode, 1);
input_sync(dev);
+}
-set_timer:
- ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
- mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
-out:
+/**
+ * ir_keydown() - generates input event for a key press
+ * @dev: the struct input_dev descriptor of the device
+ * @scancode: the scancode that we're seeking
+ * @toggle: the toggle value (protocol dependent, if the protocol doesn't
+ * support toggle values, this should be set to zero)
+ *
+ * This routine is used by the input routines when a key is pressed at the
+ * IR. It gets the keycode for a scancode and reports an input event via
+ * input_report_key().
+ */
+void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
+{
+ unsigned long flags;
+ struct ir_input_dev *ir = input_get_drvdata(dev);
+ u32 keycode = ir_g_keycode_from_table(dev, scancode);
+
+ spin_lock_irqsave(&ir->keylock, flags);
+ ir_do_keydown(dev, scancode, keycode, toggle);
+
+ if (ir->keypressed) {
+ ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
+ mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
+ }
spin_unlock_irqrestore(&ir->keylock, flags);
}
EXPORT_SYMBOL_GPL(ir_keydown);
+/**
+ * ir_keydown_notimeout() - generates input event for a key press without
+ * an automatic keyup event at a later time
+ * @dev: the struct input_dev descriptor of the device
+ * @scancode: the scancode that we're seeking
+ * @toggle: the toggle value (protocol dependent, if the protocol doesn't
+ * support toggle values, this should be set to zero)
+ *
+ * This routine is used by the input routines when a key is pressed at the
+ * IR. It gets the keycode for a scancode and reports an input event via
+ * input_report_key(). The driver must manually call ir_keyup() at a later
+ * stage.
+ */
+void ir_keydown_notimeout(struct input_dev *dev, int scancode, u8 toggle)
+{
+ unsigned long flags;
+ struct ir_input_dev *ir = input_get_drvdata(dev);
+ u32 keycode = ir_g_keycode_from_table(dev, scancode);
+
+ spin_lock_irqsave(&ir->keylock, flags);
+ ir_do_keydown(dev, scancode, keycode, toggle);
+ spin_unlock_irqrestore(&ir->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_keydown_notimeout);
+
static int ir_open(struct input_dev *input_dev)
{
struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index 6bf05a7..eb71c3a 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -38,8 +38,6 @@ module_param(repeat_period, int, 0644);
static int ir_rc5_remote_gap = 885;
module_param(ir_rc5_remote_gap, int, 0644);
-static int ir_rc5_key_timeout = 200;
-module_param(ir_rc5_key_timeout, int, 0644);
#undef dprintk
#define dprintk(arg...) do { \
@@ -74,18 +72,17 @@ static void ir_handle_key(struct bttv *btv)
(gpio & ir->mask_keydown) ? " down" : "",
(gpio & ir->mask_keyup) ? " up" : "");
- if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) ||
- (ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) {
- ir_input_keydown(ir->dev, &ir->ir, data);
+ if ((ir->mask_keydown && (gpio & ir->mask_keydown)) ||
+ (ir->mask_keyup && !(gpio & ir->mask_keyup))) {
+ ir_keydown_notimeout(ir->dev, data, 0);
} else {
/* HACK: Probably, ir->mask_keydown is missing
for this board */
if (btv->c.type == BTTV_BOARD_WINFAST2000)
- ir_input_keydown(ir->dev, &ir->ir, data);
+ ir_keydown_notimeout(ir->dev, data, 0);
- ir_input_nokey(ir->dev,&ir->ir);
+ ir_keyup(ir->dev);
}
-
}
static void ir_enltv_handle_key(struct bttv *btv)
@@ -107,9 +104,9 @@ static void ir_enltv_handle_key(struct bttv *btv)
gpio, data,
(gpio & ir->mask_keyup) ? " up" : "up/down");
- ir_input_keydown(ir->dev, &ir->ir, data);
+ ir_keydown_notimeout(ir->dev, data, 0);
if (keyup)
- ir_input_nokey(ir->dev, &ir->ir);
+ ir_keyup(ir->dev);
} else {
if ((ir->last_gpio & 1 << 31) == keyup)
return;
@@ -119,9 +116,9 @@ static void ir_enltv_handle_key(struct bttv *btv)
(gpio & ir->mask_keyup) ? " up" : "down");
if (keyup)
- ir_input_nokey(ir->dev, &ir->ir);
+ ir_keyup(ir->dev);
else
- ir_input_keydown(ir->dev, &ir->ir, data);
+ ir_keydown_notimeout(ir->dev, data, 0);
}
ir->last_gpio = data | keyup;
@@ -215,14 +212,9 @@ static void bttv_ir_start(struct bttv *btv, struct card_ir *ir)
init_timer(&ir->timer_end);
ir->timer_end.function = ir_rc5_timer_end;
ir->timer_end.data = (unsigned long)ir;
-
- init_timer(&ir->timer_keyup);
- ir->timer_keyup.function = ir_rc5_timer_keyup;
- ir->timer_keyup.data = (unsigned long)ir;
ir->shift_by = 1;
ir->start = 3;
ir->addr = 0x0;
- ir->rc5_key_timeout = ir_rc5_key_timeout;
ir->rc5_remote_gap = ir_rc5_remote_gap;
}
}
@@ -290,7 +282,6 @@ void __devinit init_bttv_i2c_ir(struct bttv *btv)
btv->init_data.name = "PV951";
btv->init_data.get_key = get_key_pv951;
btv->init_data.ir_codes = RC_MAP_PV951;
- btv->init_data.type = IR_TYPE_OTHER;
info.addr = 0x4b;
break;
default:
@@ -327,7 +318,6 @@ int bttv_input_init(struct bttv *btv)
struct card_ir *ir;
char *ir_codes = NULL;
struct input_dev *input_dev;
- u64 ir_type = IR_TYPE_OTHER;
int err = -ENOMEM;
if (!btv->has_remote)
@@ -448,10 +438,6 @@ int bttv_input_init(struct bttv *btv)
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
pci_name(btv->c.pci));
- err = ir_input_init(input_dev, &ir->ir, ir_type);
- if (err < 0)
- goto err_out_free;
-
input_dev->name = ir->name;
input_dev->phys = ir->phys;
input_dev->id.bustype = BUS_PCI;
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index d1e26a4..157285b 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -305,7 +305,6 @@ struct bttv_pll_info {
/* for gpio-connected remote control */
struct bttv_input {
struct input_dev *dev;
- struct ir_input_state ir;
char name[32];
char phys[32];
u32 mask_keycode;
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index 436ace8..564e3cb 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -131,16 +131,21 @@ static void cx88_ir_handle_key(struct cx88_IR *ir)
} else if (ir->mask_keydown) {
/* bit set on keydown */
if (gpio & ir->mask_keydown)
- ir_keydown(ir->input, data, 0);
+ ir_keydown_notimeout(ir->input, data, 0);
+ else
+ ir_keyup(ir->input);
} else if (ir->mask_keyup) {
/* bit cleared on keydown */
if (0 == (gpio & ir->mask_keyup))
- ir_keydown(ir->input, data, 0);
+ ir_keydown_notimeout(ir->input, data, 0);
+ else
+ ir_keyup(ir->input);
} else {
/* can't distinguish keydown/up :-/ */
- ir_keydown(ir->input, data, 0);
+ ir_keydown_notimeout(ir->input, data, 0);
+ ir_keyup(ir->input);
}
}
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 5a000c6..aee8943 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -270,7 +270,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
char *ir_codes = NULL;
const char *name = NULL;
- u64 ir_type = 0;
+ u64 ir_type = IR_TYPE_UNKNOWN;
struct IR_i2c *ir;
struct input_dev *input_dev;
struct i2c_adapter *adap = client->adapter;
@@ -384,7 +384,6 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
dev_name(&client->dev));
/* init + register input device */
- ir->ir_type = ir_type;
input_dev->id.bustype = BUS_I2C;
input_dev->name = ir->name;
input_dev->phys = ir->phys;
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 46d31df..7a59c26 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -44,8 +44,6 @@ MODULE_PARM_DESC(pinnacle_remote, "Specify Pinnacle PCTV remote: 0=coloured, 1=g
static int ir_rc5_remote_gap = 885;
module_param(ir_rc5_remote_gap, int, 0644);
-static int ir_rc5_key_timeout = 115;
-module_param(ir_rc5_key_timeout, int, 0644);
static int repeat_delay = 500;
module_param(repeat_delay, int, 0644);
@@ -70,7 +68,6 @@ static int saa7134_rc5_irq(struct saa7134_dev *dev);
static int saa7134_nec_irq(struct saa7134_dev *dev);
static int saa7134_raw_decode_irq(struct saa7134_dev *dev);
static void nec_task(unsigned long data);
-static void saa7134_nec_timer(unsigned long data);
/* -------------------- GPIO generic keycode builder -------------------- */
@@ -104,25 +101,25 @@ static int build_key(struct saa7134_dev *dev)
switch (dev->board) {
case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG:
if (data == ir->mask_keycode)
- ir_input_nokey(ir->dev, &ir->ir);
+ ir_keyup(ir->dev);
else
- ir_input_keydown(ir->dev, &ir->ir, data);
+ ir_keydown_notimeout(ir->dev, data, 0);
return 0;
}
if (ir->polling) {
if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) ||
(ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) {
- ir_input_keydown(ir->dev, &ir->ir, data);
+ ir_keydown_notimeout(ir->dev, data, 0);
} else {
- ir_input_nokey(ir->dev, &ir->ir);
+ ir_keyup(ir->dev);
}
}
else { /* IRQ driven mode - handle key press and release in one go */
if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) ||
(ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) {
- ir_input_keydown(ir->dev, &ir->ir, data);
- ir_input_nokey(ir->dev, &ir->ir);
+ ir_keydown_notimeout(ir->dev, data, 0);
+ ir_keyup(ir->dev);
}
}
@@ -465,17 +462,11 @@ static int __saa7134_ir_start(void *priv)
init_timer(&ir->timer_end);
ir->timer_end.function = ir_rc5_timer_end;
ir->timer_end.data = (unsigned long)ir;
- init_timer(&ir->timer_keyup);
- ir->timer_keyup.function = ir_rc5_timer_keyup;
- ir->timer_keyup.data = (unsigned long)ir;
ir->shift_by = 2;
ir->start = 0x2;
ir->addr = 0x17;
- ir->rc5_key_timeout = ir_rc5_key_timeout;
ir->rc5_remote_gap = ir_rc5_remote_gap;
} else if (ir->nec_gpio) {
- setup_timer(&ir->timer_keyup, saa7134_nec_timer,
- (unsigned long)dev);
tasklet_init(&ir->tlet, nec_task, (unsigned long)dev);
} else if (ir->raw_decode) {
/* set timer_end for code completion */
@@ -596,7 +587,6 @@ int saa7134_input_init1(struct saa7134_dev *dev)
int nec_gpio = 0;
int raw_decode = 0;
int allow_protocol_change = 0;
- u64 ir_type = IR_TYPE_OTHER;
int err;
if (dev->has_remote != SAA7134_REMOTE_GPIO)
@@ -871,10 +861,6 @@ int saa7134_input_init1(struct saa7134_dev *dev)
ir->props.change_protocol = saa7134_ir_change_protocol;
}
- err = ir_input_init(input_dev, &ir->ir, ir_type);
- if (err < 0)
- goto err_out_free;
-
input_dev->name = ir->name;
input_dev->phys = ir->phys;
input_dev->id.bustype = BUS_PCI;
@@ -1092,20 +1078,6 @@ static int saa7134_rc5_irq(struct saa7134_dev *dev)
return 1;
}
-/* On NEC protocol, One has 2.25 ms, and zero has 1.125 ms
- The first pulse (start) has 9 + 4.5 ms
- */
-
-static void saa7134_nec_timer(unsigned long data)
-{
- struct saa7134_dev *dev = (struct saa7134_dev *) data;
- struct card_ir *ir = dev->remote;
-
- dprintk("Cancel key repeat\n");
-
- ir_input_nokey(ir->dev, &ir->ir);
-}
-
static void nec_task(unsigned long data)
{
struct saa7134_dev *dev = (struct saa7134_dev *) data;
@@ -1194,12 +1166,11 @@ static void nec_task(unsigned long data)
dprintk("scancode = 0x%02x (code = 0x%02x, notcode= 0x%02x)\n",
ir->code, ircode, not_code);
- ir_input_keydown(ir->dev, &ir->ir, ir->code);
- } else
+ ir_keydown(ir->dev, ir->code, 0);
+ } else {
dprintk("Repeat last key\n");
-
- /* Keep repeating the last key */
- mod_timer(&ir->timer_keyup, jiffies + msecs_to_jiffies(150));
+ ir_repeat(ir->dev);
+ }
saa_setl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
}
diff --git a/drivers/staging/tm6000/tm6000-input.c b/drivers/staging/tm6000/tm6000-input.c
index 6022caa..3e74884 100644
--- a/drivers/staging/tm6000/tm6000-input.c
+++ b/drivers/staging/tm6000/tm6000-input.c
@@ -25,7 +25,6 @@
#include <linux/usb.h>
#include <media/ir-core.h>
-#include <media/ir-common.h>
#include "tm6000.h"
#include "tm6000-regs.h"
@@ -52,7 +51,6 @@ struct tm6000_ir_poll_result {
struct tm6000_IR {
struct tm6000_core *dev;
struct ir_input_dev *input;
- struct ir_input_state ir;
char name[32];
char phys[32];
@@ -67,6 +65,7 @@ struct tm6000_IR {
int (*get_key) (struct tm6000_IR *, struct tm6000_ir_poll_result *);
/* IR device properties */
+ u64 ir_type;
struct ir_dev_props props;
};
@@ -145,7 +144,7 @@ static int default_polling_getkey(struct tm6000_IR *ir,
return 0;
if (&dev->int_in) {
- if (ir->ir.ir_type == IR_TYPE_RC5)
+ if (ir->ir_type == IR_TYPE_RC5)
poll_result->rc_data = ir->urb_data[0];
else
poll_result->rc_data = ir->urb_data[0] | ir->urb_data[1] << 8;
@@ -155,7 +154,7 @@ static int default_polling_getkey(struct tm6000_IR *ir,
tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1);
msleep(10);
- if (ir->ir.ir_type == IR_TYPE_RC5) {
+ if (ir->ir_type == IR_TYPE_RC5) {
rc = tm6000_read_write_usb(dev, USB_DIR_IN |
USB_TYPE_VENDOR | USB_RECIP_DEVICE,
REQ_02_GET_IR_CODE, 0, 0, buf, 1);
@@ -201,10 +200,7 @@ static void tm6000_ir_handle_key(struct tm6000_IR *ir)
dprintk("ir->get_key result data=%04x\n", poll_result.rc_data);
if (ir->key) {
- ir_input_keydown(ir->input->input_dev, &ir->ir,
- (u32)poll_result.rc_data);
-
- ir_input_nokey(ir->input->input_dev, &ir->ir);
+ ir_keydown(ir->input->input_dev, poll_result.rc_data, 0);
ir->key = 0;
}
return;
@@ -291,9 +287,6 @@ int tm6000_ir_init(struct tm6000_core *dev)
strlcat(ir->phys, "/input0", sizeof(ir->phys));
tm6000_ir_change_protocol(ir, IR_TYPE_UNKNOWN);
- err = ir_input_init(ir_input_dev->input_dev, &ir->ir, IR_TYPE_OTHER);
- if (err < 0)
- goto err_out_free;
ir_input_dev->input_dev->name = ir->name;
ir_input_dev->input_dev->phys = ir->phys;
diff --git a/include/media/ir-common.h b/include/media/ir-common.h
index 4152420..4a32e89 100644
--- a/include/media/ir-common.h
+++ b/include/media/ir-common.h
@@ -1,7 +1,7 @@
/*
- *
- * some common structs and functions to handle infrared remotes via
- * input layer ...
+ * some common functions to handle infrared remote protocol decoding for
+ * drivers which have not yet been (or can't be) converted to use the
+ * regular protocol decoders...
*
* (c) 2003 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
*
@@ -33,30 +33,17 @@
#define RC5_ADDR(x) (((x)>>6)&31)
#define RC5_INSTR(x) ((x)&63)
-struct ir_input_state {
- /* configuration */
- u64 ir_type;
-
- /* key info */
- u32 ir_key; /* ir scancode */
- u32 keycode; /* linux key code */
- int keypressed; /* current state */
-};
-
/* this was saa7134_ir and bttv_ir, moved here for
* rc5 decoding. */
struct card_ir {
struct input_dev *dev;
- struct ir_input_state ir;
char name[32];
char phys[32];
int users;
-
u32 running:1;
struct ir_dev_props props;
/* Usual gpio signalling */
-
u32 mask_keycode;
u32 mask_keydown;
u32 mask_keyup;
@@ -65,7 +52,6 @@ struct card_ir {
int shift_by;
int start; // What should RC5_START() be
int addr; // What RC5_ADDR() should be.
- int rc5_key_timeout;
int rc5_remote_gap;
struct work_struct work;
struct timer_list timer;
@@ -73,8 +59,6 @@ struct card_ir {
/* RC5 gpio */
u32 rc5_gpio;
struct timer_list timer_end; /* timer_end for code completion */
- struct timer_list timer_keyup; /* timer_end for key release */
- u32 last_rc5; /* last good rc5 code */
u32 last_bit; /* last raw bit seen */
u32 code; /* raw code under construction */
struct timeval base_time; /* time of last seen code */
@@ -89,16 +73,7 @@ struct card_ir {
};
/* Routines from ir-functions.c */
-
-int ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
- const u64 ir_type);
-void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir);
-void ir_input_keydown(struct input_dev *dev, struct ir_input_state *ir,
- u32 ir_key);
u32 ir_extract_bits(u32 data, u32 mask);
-u32 ir_rc5_decode(unsigned int code);
-
void ir_rc5_timer_end(unsigned long data);
-void ir_rc5_timer_keyup(unsigned long data);
#endif
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
index 6dc37fa..bff75f2 100644
--- a/include/media/ir-core.h
+++ b/include/media/ir-core.h
@@ -159,7 +159,8 @@ void ir_input_unregister(struct input_dev *input_dev);
void ir_repeat(struct input_dev *dev);
void ir_keydown(struct input_dev *dev, int scancode, u8 toggle);
-void ir_keyup(struct ir_input_dev *ir);
+void ir_keydown_notimeout(struct input_dev *dev, int scancode, u8 toggle);
+void ir_keyup(struct input_dev *dev);
u32 ir_g_keycode_from_table(struct input_dev *input_dev, u32 scancode);
/* From ir-raw-event.c */
diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h
index 557c676..8c37b5e 100644
--- a/include/media/ir-kbd-i2c.h
+++ b/include/media/ir-kbd-i2c.h
@@ -12,8 +12,7 @@ struct IR_i2c {
struct i2c_client *c;
struct input_dev *input;
- struct ir_input_state ir;
- u64 ir_type;
+
/* Used to avoid fast repeating */
unsigned char old;
@@ -41,6 +40,7 @@ struct IR_i2c_init_data {
const char *name;
u64 type; /* IR_TYPE_RC5, etc */
u32 polling_interval; /* 0 means DEFAULT_POLLING_INTERVAL */
+
/*
* Specify either a function pointer or a value indicating one of
* ir_kbd_i2c's internal get_key functions
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH 3/7] ir-core: remove remaining users of the ir-functions keyhandlers
2010-10-29 19:08 ` [PATCH 3/7] ir-core: remove remaining users of the ir-functions keyhandlers David Härdeman
@ 2010-11-02 15:59 ` Jarod Wilson
0 siblings, 0 replies; 18+ messages in thread
From: Jarod Wilson @ 2010-11-02 15:59 UTC (permalink / raw)
To: David Härdeman; +Cc: linux-media, mchehab
On Fri, Oct 29, 2010 at 3:08 PM, David Härdeman <david@hardeman.nu> wrote:
> This patch removes the remaining usages of the ir_input_nokey() and
> ir_input_keydown() functions provided by drivers/media/IR/ir-functions.c
> by using the corresponding functionality in ir-core instead.
>
> Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Jarod Wilson <jarod@redhat.com>
Also tested the imon bits, at least as part of the whole series.
--
Jarod Wilson
jarod@wilsonet.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 4/7] ir-core: more cleanups of ir-functions.c
2010-10-29 19:07 [PATCH 0/7] rc-core: ir-core to rc-core conversion David Härdeman
` (2 preceding siblings ...)
2010-10-29 19:08 ` [PATCH 3/7] ir-core: remove remaining users of the ir-functions keyhandlers David Härdeman
@ 2010-10-29 19:08 ` David Härdeman
2010-11-02 15:59 ` Jarod Wilson
2010-10-29 19:08 ` [PATCH 5/7] ir-core: merge and rename to rc-core David Härdeman
` (4 subsequent siblings)
8 siblings, 1 reply; 18+ messages in thread
From: David Härdeman @ 2010-10-29 19:08 UTC (permalink / raw)
To: linux-media; +Cc: jarod, mchehab
cx88 only depends on VIDEO_IR because it needs ir_extract_bits().
Move that function to ir-core.h and make it inline.
Lots of drivers had dependencies on VIDEO_IR when they really
wanted IR_CORE.
The only remaining drivers to depend on VIDEO_IR are bt8xx and
saa7134 (ir_rc5_timer_end is the only function exported by
ir-functions).
Rename VIDEO_IR -> IR_LEGACY to give a hint to anyone writing or
converting drivers to IR_CORE that they do not want a dependency
on IR_LEGACY.
Signed-off-by: David Härdeman <david@hardeman.nu>
---
drivers/media/IR/Kconfig | 2 +-
drivers/media/IR/Makefile | 2 +-
drivers/media/IR/ir-functions.c | 19 -------------------
drivers/media/dvb/dm1105/Kconfig | 3 +--
drivers/media/dvb/ttpci/Kconfig | 3 +--
drivers/media/video/Kconfig | 2 +-
drivers/media/video/bt8xx/Kconfig | 4 ++--
drivers/media/video/cx18/Kconfig | 3 +--
drivers/media/video/cx231xx/Kconfig | 4 ++--
drivers/media/video/cx88/Kconfig | 3 +--
drivers/media/video/cx88/cx88-input.c | 1 -
drivers/media/video/em28xx/Kconfig | 4 ++--
drivers/media/video/ivtv/Kconfig | 3 +--
drivers/media/video/saa7134/Kconfig | 2 +-
drivers/media/video/tlg2300/Kconfig | 4 ++--
drivers/staging/cx25821/Kconfig | 4 ++--
drivers/staging/go7007/Kconfig | 4 ++--
include/media/ir-common.h | 1 -
include/media/ir-core.h | 19 +++++++++++++++++++
19 files changed, 40 insertions(+), 47 deletions(-)
diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig
index aa4163e..20e02a0 100644
--- a/drivers/media/IR/Kconfig
+++ b/drivers/media/IR/Kconfig
@@ -10,7 +10,7 @@ menuconfig IR_CORE
if you don't need IR, as otherwise, you may not be able to
compile the driver for your adapter.
-config VIDEO_IR
+config IR_LEGACY
tristate
depends on IR_CORE
default IR_CORE
diff --git a/drivers/media/IR/Makefile b/drivers/media/IR/Makefile
index f9574ad..38873cf 100644
--- a/drivers/media/IR/Makefile
+++ b/drivers/media/IR/Makefile
@@ -4,7 +4,7 @@ ir-core-objs := ir-keytable.o ir-sysfs.o ir-raw-event.o rc-map.o
obj-y += keymaps/
obj-$(CONFIG_IR_CORE) += ir-core.o
-obj-$(CONFIG_VIDEO_IR) += ir-common.o
+obj-$(CONFIG_IR_LEGACY) += ir-common.o
obj-$(CONFIG_LIRC) += lirc_dev.o
obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o
diff --git a/drivers/media/IR/ir-functions.c b/drivers/media/IR/ir-functions.c
index fca734c..ec021c9 100644
--- a/drivers/media/IR/ir-functions.c
+++ b/drivers/media/IR/ir-functions.c
@@ -31,25 +31,6 @@
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
MODULE_LICENSE("GPL");
-/* -------------------------------------------------------------------------- */
-/* extract mask bits out of data and pack them into the result */
-u32 ir_extract_bits(u32 data, u32 mask)
-{
- u32 vbit = 1, value = 0;
-
- do {
- if (mask&1) {
- if (data&1)
- value |= vbit;
- vbit<<=1;
- }
- data>>=1;
- } while (mask>>=1);
-
- return value;
-}
-EXPORT_SYMBOL_GPL(ir_extract_bits);
-
/* RC5 decoding stuff, moved from bttv-input.c to share it with
* saa7134 */
diff --git a/drivers/media/dvb/dm1105/Kconfig b/drivers/media/dvb/dm1105/Kconfig
index a6ceb08..576f3b7 100644
--- a/drivers/media/dvb/dm1105/Kconfig
+++ b/drivers/media/dvb/dm1105/Kconfig
@@ -1,7 +1,6 @@
config DVB_DM1105
tristate "SDMC DM1105 based PCI cards"
depends on DVB_CORE && PCI && I2C
- depends on INPUT
select DVB_PLL if !DVB_FE_CUSTOMISE
select DVB_STV0299 if !DVB_FE_CUSTOMISE
select DVB_STV0288 if !DVB_FE_CUSTOMISE
@@ -9,7 +8,7 @@ config DVB_DM1105
select DVB_CX24116 if !DVB_FE_CUSTOMISE
select DVB_SI21XX if !DVB_FE_CUSTOMISE
select DVB_DS3000 if !DVB_FE_CUSTOMISE
- depends on VIDEO_IR
+ depends on IR_CORE
help
Support for cards based on the SDMC DM1105 PCI chip like
DvbWorld 2002
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index debea8d..0ffd694 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -89,7 +89,6 @@ config DVB_BUDGET
config DVB_BUDGET_CI
tristate "Budget cards with onboard CI connector"
depends on DVB_BUDGET_CORE && I2C
- depends on INPUT # due to IR
select DVB_STV0297 if !DVB_FE_CUSTOMISE
select DVB_STV0299 if !DVB_FE_CUSTOMISE
select DVB_TDA1004X if !DVB_FE_CUSTOMISE
@@ -98,7 +97,7 @@ config DVB_BUDGET_CI
select DVB_LNBP21 if !DVB_FE_CUSTOMISE
select DVB_TDA10023 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE
- depends on VIDEO_IR
+ depends on IR_CORE
help
Support for simple SAA7146 based DVB cards
(so called Budget- or Nova-PCI cards) without onboard
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 0efbb29..44974a5 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -96,7 +96,7 @@ config VIDEO_HELPER_CHIPS_AUTO
config VIDEO_IR_I2C
tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
- depends on I2C && VIDEO_IR
+ depends on I2C && IR_CORE
default y
---help---
Most boards have an IR chip directly connected via GPIO. However,
diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
index 1a4a89f..659e448 100644
--- a/drivers/media/video/bt8xx/Kconfig
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -1,10 +1,10 @@
config VIDEO_BT848
tristate "BT848 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2 && INPUT
+ depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2
select I2C_ALGOBIT
select VIDEO_BTCX
select VIDEOBUF_DMA_SG
- depends on VIDEO_IR
+ depends on IR_LEGACY
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig
index 76c054d..f3c3ccb 100644
--- a/drivers/media/video/cx18/Kconfig
+++ b/drivers/media/video/cx18/Kconfig
@@ -1,9 +1,8 @@
config VIDEO_CX18
tristate "Conexant cx23418 MPEG encoder support"
depends on VIDEO_V4L2 && DVB_CORE && PCI && I2C && EXPERIMENTAL
- depends on INPUT # due to VIDEO_IR
select I2C_ALGOBIT
- depends on VIDEO_IR
+ depends on IR_CORE
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_CX2341X
diff --git a/drivers/media/video/cx231xx/Kconfig b/drivers/media/video/cx231xx/Kconfig
index bb04914..99f8683 100644
--- a/drivers/media/video/cx231xx/Kconfig
+++ b/drivers/media/video/cx231xx/Kconfig
@@ -1,9 +1,9 @@
config VIDEO_CX231XX
tristate "Conexant cx231xx USB video capture support"
- depends on VIDEO_DEV && I2C && INPUT
+ depends on VIDEO_DEV && I2C
select VIDEO_TUNER
select VIDEO_TVEEPROM
- depends on VIDEO_IR
+ depends on IR_CORE
select VIDEOBUF_VMALLOC
select VIDEO_CX25840
select VIDEO_CX2341X
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index bcfd1ac..dbae629 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -1,12 +1,11 @@
config VIDEO_CX88
tristate "Conexant 2388x (bt878 successor) support"
- depends on VIDEO_DEV && PCI && I2C && INPUT && IR_CORE
+ depends on VIDEO_DEV && PCI && I2C && IR_CORE
select I2C_ALGOBIT
select VIDEO_BTCX
select VIDEOBUF_DMA_SG
select VIDEO_TUNER
select VIDEO_TVEEPROM
- depends on VIDEO_IR
select VIDEO_WM8775 if VIDEO_HELPER_CHIPS_AUTO
---help---
This is a video4linux driver for Conexant 2388x based
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index 564e3cb..8c41124 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -31,7 +31,6 @@
#include "cx88.h"
#include <media/ir-core.h>
-#include <media/ir-common.h>
#define MODULE_NAME "cx88xx"
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 66aefd6..f363069 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -1,9 +1,9 @@
config VIDEO_EM28XX
tristate "Empia EM28xx USB video capture support"
- depends on VIDEO_DEV && I2C && INPUT
+ depends on VIDEO_DEV && I2C
select VIDEO_TUNER
select VIDEO_TVEEPROM
- depends on VIDEO_IR
+ depends on IR_CORE
select VIDEOBUF_VMALLOC
select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO
diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig
index be4af1f..c4f1980 100644
--- a/drivers/media/video/ivtv/Kconfig
+++ b/drivers/media/video/ivtv/Kconfig
@@ -1,9 +1,8 @@
config VIDEO_IVTV
tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support"
depends on VIDEO_V4L2 && PCI && I2C
- depends on INPUT # due to VIDEO_IR
select I2C_ALGOBIT
- depends on VIDEO_IR
+ depends on IR_CORE
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_CX2341X
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index 3fe71be..32a95a2 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -26,7 +26,7 @@ config VIDEO_SAA7134_ALSA
config VIDEO_SAA7134_RC
bool "Philips SAA7134 Remote Controller support"
- depends on VIDEO_IR
+ depends on IR_LEGACY
depends on VIDEO_SAA7134
default y
---help---
diff --git a/drivers/media/video/tlg2300/Kconfig b/drivers/media/video/tlg2300/Kconfig
index 1686ebf..580580e 100644
--- a/drivers/media/video/tlg2300/Kconfig
+++ b/drivers/media/video/tlg2300/Kconfig
@@ -1,9 +1,9 @@
config VIDEO_TLG2300
tristate "Telegent TLG2300 USB video capture support"
- depends on VIDEO_DEV && I2C && INPUT && SND && DVB_CORE
+ depends on VIDEO_DEV && I2C && SND && DVB_CORE
select VIDEO_TUNER
select VIDEO_TVEEPROM
- depends on VIDEO_IR
+ depends on IR_CORE
select VIDEOBUF_VMALLOC
select SND_PCM
select VIDEOBUF_DVB
diff --git a/drivers/staging/cx25821/Kconfig b/drivers/staging/cx25821/Kconfig
index a766d0b..9c2e259 100644
--- a/drivers/staging/cx25821/Kconfig
+++ b/drivers/staging/cx25821/Kconfig
@@ -1,10 +1,10 @@
config VIDEO_CX25821
tristate "Conexant cx25821 support"
- depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT
+ depends on DVB_CORE && VIDEO_DEV && PCI && I2C
select I2C_ALGOBIT
select VIDEO_BTCX
select VIDEO_TVEEPROM
- depends on VIDEO_IR
+ depends on IR_CORE
select VIDEOBUF_DVB
select VIDEOBUF_DMA_SG
select VIDEO_CX25840
diff --git a/drivers/staging/go7007/Kconfig b/drivers/staging/go7007/Kconfig
index b816a60..75ddaad 100644
--- a/drivers/staging/go7007/Kconfig
+++ b/drivers/staging/go7007/Kconfig
@@ -1,9 +1,9 @@
config VIDEO_GO7007
tristate "WIS GO7007 MPEG encoder support"
- depends on VIDEO_DEV && PCI && I2C && INPUT
+ depends on VIDEO_DEV && PCI && I2C
depends on SND
select VIDEOBUF_DMA_SG
- depends on VIDEO_IR
+ depends on IR_CORE
select VIDEO_TUNER
select VIDEO_TVEEPROM
select SND_PCM
diff --git a/include/media/ir-common.h b/include/media/ir-common.h
index 4a32e89..d1ae869 100644
--- a/include/media/ir-common.h
+++ b/include/media/ir-common.h
@@ -73,7 +73,6 @@ struct card_ir {
};
/* Routines from ir-functions.c */
-u32 ir_extract_bits(u32 data, u32 mask);
void ir_rc5_timer_end(unsigned long data);
#endif
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
index bff75f2..53048a2 100644
--- a/include/media/ir-core.h
+++ b/include/media/ir-core.h
@@ -212,4 +212,23 @@ static inline void ir_raw_event_reset(struct input_dev *input_dev)
ir_raw_event_handle(input_dev);
}
+
+/* extract mask bits out of data and pack them into the result */
+static inline u32 ir_extract_bits(u32 data, u32 mask)
+{
+ u32 vbit = 1, value = 0;
+
+ do {
+ if (mask & 1) {
+ if (data & 1)
+ value |= vbit;
+ vbit <<= 1;
+ }
+ data >>= 1;
+ } while (mask >>= 1);
+
+ return value;
+}
+
+
#endif /* _IR_CORE */
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH 4/7] ir-core: more cleanups of ir-functions.c
2010-10-29 19:08 ` [PATCH 4/7] ir-core: more cleanups of ir-functions.c David Härdeman
@ 2010-11-02 15:59 ` Jarod Wilson
0 siblings, 0 replies; 18+ messages in thread
From: Jarod Wilson @ 2010-11-02 15:59 UTC (permalink / raw)
To: David Härdeman; +Cc: linux-media, mchehab
On Fri, Oct 29, 2010 at 3:08 PM, David Härdeman <david@hardeman.nu> wrote:
> cx88 only depends on VIDEO_IR because it needs ir_extract_bits().
> Move that function to ir-core.h and make it inline.
>
> Lots of drivers had dependencies on VIDEO_IR when they really
> wanted IR_CORE.
>
> The only remaining drivers to depend on VIDEO_IR are bt8xx and
> saa7134 (ir_rc5_timer_end is the only function exported by
> ir-functions).
>
> Rename VIDEO_IR -> IR_LEGACY to give a hint to anyone writing or
> converting drivers to IR_CORE that they do not want a dependency
> on IR_LEGACY.
>
> Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Jarod Wilson <jarod@redhat.com>
--
Jarod Wilson
jarod@wilsonet.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 5/7] ir-core: merge and rename to rc-core
2010-10-29 19:07 [PATCH 0/7] rc-core: ir-core to rc-core conversion David Härdeman
` (3 preceding siblings ...)
2010-10-29 19:08 ` [PATCH 4/7] ir-core: more cleanups of ir-functions.c David Härdeman
@ 2010-10-29 19:08 ` David Härdeman
2010-11-02 16:01 ` Jarod Wilson
2010-10-29 19:08 ` [PATCH 6/7] ir-core: make struct rc_dev the primary interface David Härdeman
` (3 subsequent siblings)
8 siblings, 1 reply; 18+ messages in thread
From: David Härdeman @ 2010-10-29 19:08 UTC (permalink / raw)
To: linux-media; +Cc: jarod, mchehab
This patch merges the files which makes up ir-core and renames the
resulting module to rc-core. ir-raw-event.c is still kept as a separate
file (but renamed to rc-raw.c) as suggested by Mauro.
Signed-off-by: David Härdeman <david@hardeman.nu>
---
drivers/media/IR/Makefile | 4
drivers/media/IR/ir-core-priv.h | 10
drivers/media/IR/ir-keytable.c | 764 -------------------------
drivers/media/IR/ir-raw-event.c | 382 ------------
drivers/media/IR/ir-sysfs.c | 362 ------------
drivers/media/IR/rc-main.c | 1198 +++++++++++++++++++++++++++++++++++++++
drivers/media/IR/rc-map.c | 107 ---
drivers/media/IR/rc-raw.c | 382 ++++++++++++
include/media/ir-core.h | 2
9 files changed, 1582 insertions(+), 1629 deletions(-)
delete mode 100644 drivers/media/IR/ir-keytable.c
delete mode 100644 drivers/media/IR/ir-raw-event.c
delete mode 100644 drivers/media/IR/ir-sysfs.c
create mode 100644 drivers/media/IR/rc-main.c
delete mode 100644 drivers/media/IR/rc-map.c
create mode 100644 drivers/media/IR/rc-raw.c
diff --git a/drivers/media/IR/Makefile b/drivers/media/IR/Makefile
index 38873cf..1eb24e6 100644
--- a/drivers/media/IR/Makefile
+++ b/drivers/media/IR/Makefile
@@ -1,9 +1,9 @@
ir-common-objs := ir-functions.o
-ir-core-objs := ir-keytable.o ir-sysfs.o ir-raw-event.o rc-map.o
+rc-core-objs := rc-main.o rc-raw.o
obj-y += keymaps/
-obj-$(CONFIG_IR_CORE) += ir-core.o
+obj-$(CONFIG_IR_CORE) += rc-core.o
obj-$(CONFIG_IR_LEGACY) += ir-common.o
obj-$(CONFIG_LIRC) += lirc_dev.o
obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index 81c936b..4be0757 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -129,14 +129,6 @@ static inline bool is_timing_event(struct ir_raw_event ev)
#define TO_US(duration) DIV_ROUND_CLOSEST((duration), 1000)
#define TO_STR(is_pulse) ((is_pulse) ? "pulse" : "space")
-/*
- * Routines from ir-sysfs.c - Meant to be called only internally inside
- * ir-core
- */
-int ir_register_input(struct input_dev *input_dev);
-
-int ir_register_class(struct input_dev *input_dev);
-void ir_unregister_class(struct input_dev *input_dev);
/*
* Routines from ir-raw-event.c to be used internally and by decoders
@@ -148,8 +140,6 @@ int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler);
void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler);
void ir_raw_init(void);
-int ir_rcmap_init(void);
-void ir_rcmap_cleanup(void);
/*
* Decoder initialization code
*
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
deleted file mode 100644
index f869799..0000000
--- a/drivers/media/IR/ir-keytable.c
+++ /dev/null
@@ -1,764 +0,0 @@
-/* ir-keytable.c - handle IR scancode->keycode tables
- *
- * Copyright (C) 2009 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-
-#include <linux/input.h>
-#include <linux/slab.h>
-#include "ir-core-priv.h"
-
-/* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */
-#define IR_TAB_MIN_SIZE 256
-#define IR_TAB_MAX_SIZE 8192
-
-/* FIXME: IR_KEYPRESS_TIMEOUT should be protocol specific */
-#define IR_KEYPRESS_TIMEOUT 250
-
-/**
- * ir_create_table() - initializes a scancode table
- * @rc_tab: the ir_scancode_table to initialize
- * @name: name to assign to the table
- * @ir_type: ir type to assign to the new table
- * @size: initial size of the table
- * @return: zero on success or a negative error code
- *
- * This routine will initialize the ir_scancode_table and will allocate
- * memory to hold at least the specified number elements.
- */
-static int ir_create_table(struct ir_scancode_table *rc_tab,
- const char *name, u64 ir_type, size_t size)
-{
- rc_tab->name = name;
- rc_tab->ir_type = ir_type;
- rc_tab->alloc = roundup_pow_of_two(size * sizeof(struct ir_scancode));
- rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
- rc_tab->scan = kmalloc(rc_tab->alloc, GFP_KERNEL);
- if (!rc_tab->scan)
- return -ENOMEM;
-
- IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
- rc_tab->size, rc_tab->alloc);
- return 0;
-}
-
-/**
- * ir_free_table() - frees memory allocated by a scancode table
- * @rc_tab: the table whose mappings need to be freed
- *
- * This routine will free memory alloctaed for key mappings used by given
- * scancode table.
- */
-static void ir_free_table(struct ir_scancode_table *rc_tab)
-{
- rc_tab->size = 0;
- kfree(rc_tab->scan);
- rc_tab->scan = NULL;
-}
-
-/**
- * ir_resize_table() - resizes a scancode table if necessary
- * @rc_tab: the ir_scancode_table to resize
- * @gfp_flags: gfp flags to use when allocating memory
- * @return: zero on success or a negative error code
- *
- * This routine will shrink the ir_scancode_table if it has lots of
- * unused entries and grow it if it is full.
- */
-static int ir_resize_table(struct ir_scancode_table *rc_tab, gfp_t gfp_flags)
-{
- unsigned int oldalloc = rc_tab->alloc;
- unsigned int newalloc = oldalloc;
- struct ir_scancode *oldscan = rc_tab->scan;
- struct ir_scancode *newscan;
-
- if (rc_tab->size == rc_tab->len) {
- /* All entries in use -> grow keytable */
- if (rc_tab->alloc >= IR_TAB_MAX_SIZE)
- return -ENOMEM;
-
- newalloc *= 2;
- IR_dprintk(1, "Growing table to %u bytes\n", newalloc);
- }
-
- if ((rc_tab->len * 3 < rc_tab->size) && (oldalloc > IR_TAB_MIN_SIZE)) {
- /* Less than 1/3 of entries in use -> shrink keytable */
- newalloc /= 2;
- IR_dprintk(1, "Shrinking table to %u bytes\n", newalloc);
- }
-
- if (newalloc == oldalloc)
- return 0;
-
- newscan = kmalloc(newalloc, gfp_flags);
- if (!newscan) {
- IR_dprintk(1, "Failed to kmalloc %u bytes\n", newalloc);
- return -ENOMEM;
- }
-
- memcpy(newscan, rc_tab->scan, rc_tab->len * sizeof(struct ir_scancode));
- rc_tab->scan = newscan;
- rc_tab->alloc = newalloc;
- rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
- kfree(oldscan);
- return 0;
-}
-
-/**
- * ir_update_mapping() - set a keycode in the scancode->keycode table
- * @dev: the struct input_dev device descriptor
- * @rc_tab: scancode table to be adjusted
- * @index: index of the mapping that needs to be updated
- * @keycode: the desired keycode
- * @return: previous keycode assigned to the mapping
- *
- * This routine is used to update scancode->keycopde mapping at given
- * position.
- */
-static unsigned int ir_update_mapping(struct input_dev *dev,
- struct ir_scancode_table *rc_tab,
- unsigned int index,
- unsigned int new_keycode)
-{
- int old_keycode = rc_tab->scan[index].keycode;
- int i;
-
- /* Did the user wish to remove the mapping? */
- if (new_keycode == KEY_RESERVED || new_keycode == KEY_UNKNOWN) {
- IR_dprintk(1, "#%d: Deleting scan 0x%04x\n",
- index, rc_tab->scan[index].scancode);
- rc_tab->len--;
- memmove(&rc_tab->scan[index], &rc_tab->scan[index+ 1],
- (rc_tab->len - index) * sizeof(struct ir_scancode));
- } else {
- IR_dprintk(1, "#%d: %s scan 0x%04x with key 0x%04x\n",
- index,
- old_keycode == KEY_RESERVED ? "New" : "Replacing",
- rc_tab->scan[index].scancode, new_keycode);
- rc_tab->scan[index].keycode = new_keycode;
- __set_bit(new_keycode, dev->keybit);
- }
-
- if (old_keycode != KEY_RESERVED) {
- /* A previous mapping was updated... */
- __clear_bit(old_keycode, dev->keybit);
- /* ... but another scancode might use the same keycode */
- for (i = 0; i < rc_tab->len; i++) {
- if (rc_tab->scan[i].keycode == old_keycode) {
- __set_bit(old_keycode, dev->keybit);
- break;
- }
- }
-
- /* Possibly shrink the keytable, failure is not a problem */
- ir_resize_table(rc_tab, GFP_ATOMIC);
- }
-
- return old_keycode;
-}
-
-/**
- * ir_locate_scancode() - set a keycode in the scancode->keycode table
- * @ir_dev: the struct ir_input_dev device descriptor
- * @rc_tab: scancode table to be searched
- * @scancode: the desired scancode
- * @resize: controls whether we allowed to resize the table to
- * accomodate not yet present scancodes
- * @return: index of the mapping containing scancode in question
- * or -1U in case of failure.
- *
- * This routine is used to locate given scancode in ir_scancode_table.
- * If scancode is not yet present the routine will allocate a new slot
- * for it.
- */
-static unsigned int ir_establish_scancode(struct ir_input_dev *ir_dev,
- struct ir_scancode_table *rc_tab,
- unsigned int scancode,
- bool resize)
-{
- unsigned int i;
-
- /*
- * Unfortunately, some hardware-based IR decoders don't provide
- * all bits for the complete IR code. In general, they provide only
- * the command part of the IR code. Yet, as it is possible to replace
- * the provided IR with another one, it is needed to allow loading
- * IR tables from other remotes. So,
- */
- if (ir_dev->props && ir_dev->props->scanmask)
- scancode &= ir_dev->props->scanmask;
-
- /* First check if we already have a mapping for this ir command */
- for (i = 0; i < rc_tab->len; i++) {
- if (rc_tab->scan[i].scancode == scancode)
- return i;
-
- /* Keytable is sorted from lowest to highest scancode */
- if (rc_tab->scan[i].scancode >= scancode)
- break;
- }
-
- /* No previous mapping found, we might need to grow the table */
- if (rc_tab->size == rc_tab->len) {
- if (!resize || ir_resize_table(rc_tab, GFP_ATOMIC))
- return -1U;
- }
-
- /* i is the proper index to insert our new keycode */
- if (i < rc_tab->len)
- memmove(&rc_tab->scan[i + 1], &rc_tab->scan[i],
- (rc_tab->len - i) * sizeof(struct ir_scancode));
- rc_tab->scan[i].scancode = scancode;
- rc_tab->scan[i].keycode = KEY_RESERVED;
- rc_tab->len++;
-
- return i;
-}
-
-/**
- * ir_setkeycode() - set a keycode in the scancode->keycode table
- * @dev: the struct input_dev device descriptor
- * @scancode: the desired scancode
- * @keycode: result
- * @return: -EINVAL if the keycode could not be inserted, otherwise zero.
- *
- * This routine is used to handle evdev EVIOCSKEY ioctl.
- */
-static int ir_setkeycode(struct input_dev *dev,
- const struct input_keymap_entry *ke,
- unsigned int *old_keycode)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(dev);
- struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
- unsigned int index;
- unsigned int scancode;
- int retval;
- unsigned long flags;
-
- spin_lock_irqsave(&rc_tab->lock, flags);
-
- if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
- index = ke->index;
- if (index >= rc_tab->len) {
- retval = -EINVAL;
- goto out;
- }
- } else {
- retval = input_scancode_to_scalar(ke, &scancode);
- if (retval)
- goto out;
-
- index = ir_establish_scancode(ir_dev, rc_tab, scancode, true);
- if (index >= rc_tab->len) {
- retval = -ENOMEM;
- goto out;
- }
- }
-
- *old_keycode = ir_update_mapping(dev, rc_tab, index, ke->keycode);
-
-out:
- spin_unlock_irqrestore(&rc_tab->lock, flags);
- return retval;
-}
-
-/**
- * ir_setkeytable() - sets several entries in the scancode->keycode table
- * @dev: the struct input_dev device descriptor
- * @to: the struct ir_scancode_table to copy entries to
- * @from: the struct ir_scancode_table to copy entries from
- * @return: -ENOMEM if all keycodes could not be inserted, otherwise zero.
- *
- * This routine is used to handle table initialization.
- */
-static int ir_setkeytable(struct ir_input_dev *ir_dev,
- const struct ir_scancode_table *from)
-{
- struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
- unsigned int i, index;
- int rc;
-
- rc = ir_create_table(&ir_dev->rc_tab,
- from->name, from->ir_type, from->size);
- if (rc)
- return rc;
-
- IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
- rc_tab->size, rc_tab->alloc);
-
- for (i = 0; i < from->size; i++) {
- index = ir_establish_scancode(ir_dev, rc_tab,
- from->scan[i].scancode, false);
- if (index >= rc_tab->len) {
- rc = -ENOMEM;
- break;
- }
-
- ir_update_mapping(ir_dev->input_dev, rc_tab, index,
- from->scan[i].keycode);
- }
-
- if (rc)
- ir_free_table(rc_tab);
-
- return rc;
-}
-
-/**
- * ir_lookup_by_scancode() - locate mapping by scancode
- * @rc_tab: the &struct ir_scancode_table to search
- * @scancode: scancode to look for in the table
- * @return: index in the table, -1U if not found
- *
- * This routine performs binary search in RC keykeymap table for
- * given scancode.
- */
-static unsigned int ir_lookup_by_scancode(const struct ir_scancode_table *rc_tab,
- unsigned int scancode)
-{
- unsigned int start = 0;
- unsigned int end = rc_tab->len - 1;
- unsigned int mid;
-
- while (start <= end) {
- mid = (start + end) / 2;
- if (rc_tab->scan[mid].scancode < scancode)
- start = mid + 1;
- else if (rc_tab->scan[mid].scancode > scancode)
- end = mid - 1;
- else
- return mid;
- }
-
- return -1U;
-}
-
-/**
- * ir_getkeycode() - get a keycode from the scancode->keycode table
- * @dev: the struct input_dev device descriptor
- * @scancode: the desired scancode
- * @keycode: used to return the keycode, if found, or KEY_RESERVED
- * @return: always returns zero.
- *
- * This routine is used to handle evdev EVIOCGKEY ioctl.
- */
-static int ir_getkeycode(struct input_dev *dev,
- struct input_keymap_entry *ke)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(dev);
- struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
- struct ir_scancode *entry;
- unsigned long flags;
- unsigned int index;
- unsigned int scancode;
- int retval;
-
- spin_lock_irqsave(&rc_tab->lock, flags);
-
- if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
- index = ke->index;
- } else {
- retval = input_scancode_to_scalar(ke, &scancode);
- if (retval)
- goto out;
-
- index = ir_lookup_by_scancode(rc_tab, scancode);
- }
-
- if (index >= rc_tab->len) {
- if (!(ke->flags & INPUT_KEYMAP_BY_INDEX))
- IR_dprintk(1, "unknown key for scancode 0x%04x\n",
- scancode);
- retval = -EINVAL;
- goto out;
- }
-
- entry = &rc_tab->scan[index];
-
- ke->index = index;
- ke->keycode = entry->keycode;
- ke->len = sizeof(entry->scancode);
- memcpy(ke->scancode, &entry->scancode, sizeof(entry->scancode));
-
-out:
- spin_unlock_irqrestore(&rc_tab->lock, flags);
- return retval;
-}
-
-/**
- * ir_g_keycode_from_table() - gets the keycode that corresponds to a scancode
- * @input_dev: the struct input_dev descriptor of the device
- * @scancode: the scancode that we're seeking
- *
- * This routine is used by the input routines when a key is pressed at the
- * IR. The scancode is received and needs to be converted into a keycode.
- * If the key is not found, it returns KEY_RESERVED. Otherwise, returns the
- * corresponding keycode from the table.
- */
-u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(dev);
- struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
- unsigned int keycode;
- unsigned int index;
- unsigned long flags;
-
- spin_lock_irqsave(&rc_tab->lock, flags);
-
- index = ir_lookup_by_scancode(rc_tab, scancode);
- keycode = index < rc_tab->len ?
- rc_tab->scan[index].keycode : KEY_RESERVED;
-
- spin_unlock_irqrestore(&rc_tab->lock, flags);
-
- if (keycode != KEY_RESERVED)
- IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
- dev->name, scancode, keycode);
-
- return keycode;
-}
-EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
-
-/**
- * ir_do_keyup() - internal function to signal the release of a keypress
- * @ir: the struct ir_input_dev descriptor of the device
- *
- * This function is used internally to release a keypress, it must be
- * called with keylock held.
- */
-static void ir_do_keyup(struct ir_input_dev *ir)
-{
- if (!ir->keypressed)
- return;
-
- IR_dprintk(1, "keyup key 0x%04x\n", ir->last_keycode);
- input_report_key(ir->input_dev, ir->last_keycode, 0);
- input_sync(ir->input_dev);
- ir->keypressed = false;
-}
-
-/**
- * ir_keyup() - generates input event to signal the release of a keypress
- * @dev: the struct input_dev descriptor of the device
- *
- * This routine is used to signal that a key has been released on the
- * remote control.
- */
-void ir_keyup(struct input_dev *dev)
-{
- unsigned long flags;
- struct ir_input_dev *ir = input_get_drvdata(dev);
-
- spin_lock_irqsave(&ir->keylock, flags);
- ir_do_keyup(ir);
- spin_unlock_irqrestore(&ir->keylock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_keyup);
-
-/**
- * ir_timer_keyup() - generates a keyup event after a timeout
- * @cookie: a pointer to struct ir_input_dev passed to setup_timer()
- *
- * This routine will generate a keyup event some time after a keydown event
- * is generated when no further activity has been detected.
- */
-static void ir_timer_keyup(unsigned long cookie)
-{
- struct ir_input_dev *ir = (struct ir_input_dev *)cookie;
- unsigned long flags;
-
- /*
- * ir->keyup_jiffies is used to prevent a race condition if a
- * hardware interrupt occurs at this point and the keyup timer
- * event is moved further into the future as a result.
- *
- * The timer will then be reactivated and this function called
- * again in the future. We need to exit gracefully in that case
- * to allow the input subsystem to do its auto-repeat magic or
- * a keyup event might follow immediately after the keydown.
- */
- spin_lock_irqsave(&ir->keylock, flags);
- if (time_is_before_eq_jiffies(ir->keyup_jiffies))
- ir_do_keyup(ir);
- spin_unlock_irqrestore(&ir->keylock, flags);
-}
-
-/**
- * ir_repeat() - notifies the IR core that a key is still pressed
- * @dev: the struct input_dev descriptor of the device
- *
- * This routine is used by IR decoders when a repeat message which does
- * not include the necessary bits to reproduce the scancode has been
- * received.
- */
-void ir_repeat(struct input_dev *dev)
-{
- unsigned long flags;
- struct ir_input_dev *ir = input_get_drvdata(dev);
-
- spin_lock_irqsave(&ir->keylock, flags);
-
- input_event(dev, EV_MSC, MSC_SCAN, ir->last_scancode);
-
- if (!ir->keypressed)
- goto out;
-
- ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
- mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
-
-out:
- spin_unlock_irqrestore(&ir->keylock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_repeat);
-
-/**
- * ir_do_keydown() - internal function to process a keypress
- * @dev: the struct input_dev descriptor of the device
- * @scancode: the scancode of the keypress
- * @keycode: the keycode of the keypress
- * @toggle: the toggle value of the keypress
- *
- * This function is used internally to register a keypress, it must be
- * called with keylock held.
- */
-static void ir_do_keydown(struct input_dev *dev, int scancode,
- u32 keycode, u8 toggle)
-{
- struct ir_input_dev *ir = input_get_drvdata(dev);
-
- input_event(dev, EV_MSC, MSC_SCAN, scancode);
-
- /* Repeat event? */
- if (ir->keypressed &&
- ir->last_scancode == scancode &&
- ir->last_toggle == toggle)
- return;
-
- /* Release old keypress */
- ir_do_keyup(ir);
-
- ir->last_scancode = scancode;
- ir->last_toggle = toggle;
- ir->last_keycode = keycode;
-
- if (keycode == KEY_RESERVED)
- return;
-
- /* Register a keypress */
- ir->keypressed = true;
- IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
- dev->name, keycode, scancode);
- input_report_key(dev, ir->last_keycode, 1);
- input_sync(dev);
-}
-
-/**
- * ir_keydown() - generates input event for a key press
- * @dev: the struct input_dev descriptor of the device
- * @scancode: the scancode that we're seeking
- * @toggle: the toggle value (protocol dependent, if the protocol doesn't
- * support toggle values, this should be set to zero)
- *
- * This routine is used by the input routines when a key is pressed at the
- * IR. It gets the keycode for a scancode and reports an input event via
- * input_report_key().
- */
-void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
-{
- unsigned long flags;
- struct ir_input_dev *ir = input_get_drvdata(dev);
- u32 keycode = ir_g_keycode_from_table(dev, scancode);
-
- spin_lock_irqsave(&ir->keylock, flags);
- ir_do_keydown(dev, scancode, keycode, toggle);
-
- if (ir->keypressed) {
- ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
- mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
- }
- spin_unlock_irqrestore(&ir->keylock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_keydown);
-
-/**
- * ir_keydown_notimeout() - generates input event for a key press without
- * an automatic keyup event at a later time
- * @dev: the struct input_dev descriptor of the device
- * @scancode: the scancode that we're seeking
- * @toggle: the toggle value (protocol dependent, if the protocol doesn't
- * support toggle values, this should be set to zero)
- *
- * This routine is used by the input routines when a key is pressed at the
- * IR. It gets the keycode for a scancode and reports an input event via
- * input_report_key(). The driver must manually call ir_keyup() at a later
- * stage.
- */
-void ir_keydown_notimeout(struct input_dev *dev, int scancode, u8 toggle)
-{
- unsigned long flags;
- struct ir_input_dev *ir = input_get_drvdata(dev);
- u32 keycode = ir_g_keycode_from_table(dev, scancode);
-
- spin_lock_irqsave(&ir->keylock, flags);
- ir_do_keydown(dev, scancode, keycode, toggle);
- spin_unlock_irqrestore(&ir->keylock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_keydown_notimeout);
-
-static int ir_open(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
- return ir_dev->props->open(ir_dev->props->priv);
-}
-
-static void ir_close(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
- ir_dev->props->close(ir_dev->props->priv);
-}
-
-/**
- * __ir_input_register() - sets the IR keycode table and add the handlers
- * for keymap table get/set
- * @input_dev: the struct input_dev descriptor of the device
- * @rc_tab: the struct ir_scancode_table table of scancode/keymap
- *
- * This routine is used to initialize the input infrastructure
- * to work with an IR.
- * It will register the input/evdev interface for the device and
- * register the syfs code for IR class
- */
-int __ir_input_register(struct input_dev *input_dev,
- const struct ir_scancode_table *rc_tab,
- struct ir_dev_props *props,
- const char *driver_name)
-{
- struct ir_input_dev *ir_dev;
- int rc;
-
- if (rc_tab->scan == NULL || !rc_tab->size)
- return -EINVAL;
-
- ir_dev = kzalloc(sizeof(*ir_dev), GFP_KERNEL);
- if (!ir_dev)
- return -ENOMEM;
-
- ir_dev->driver_name = kasprintf(GFP_KERNEL, "%s", driver_name);
- if (!ir_dev->driver_name) {
- rc = -ENOMEM;
- goto out_dev;
- }
-
- input_dev->getkeycode_new = ir_getkeycode;
- input_dev->setkeycode_new = ir_setkeycode;
- input_set_drvdata(input_dev, ir_dev);
- ir_dev->input_dev = input_dev;
-
- spin_lock_init(&ir_dev->rc_tab.lock);
- spin_lock_init(&ir_dev->keylock);
- setup_timer(&ir_dev->timer_keyup, ir_timer_keyup, (unsigned long)ir_dev);
-
- if (props) {
- ir_dev->props = props;
- if (props->open)
- input_dev->open = ir_open;
- if (props->close)
- input_dev->close = ir_close;
- }
-
- set_bit(EV_KEY, input_dev->evbit);
- set_bit(EV_REP, input_dev->evbit);
- set_bit(EV_MSC, input_dev->evbit);
- set_bit(MSC_SCAN, input_dev->mscbit);
-
- rc = ir_setkeytable(ir_dev, rc_tab);
- if (rc)
- goto out_name;
-
- rc = ir_register_class(input_dev);
- if (rc < 0)
- goto out_table;
-
- if (ir_dev->props)
- if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
- rc = ir_raw_event_register(input_dev);
- if (rc < 0)
- goto out_event;
- }
-
- rc = ir_register_input(input_dev);
- if (rc < 0)
- goto out_event;
-
- IR_dprintk(1, "Registered input device on %s for %s remote%s.\n",
- driver_name, rc_tab->name,
- (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
- " in raw mode" : "");
-
- /*
- * Default delay of 250ms is too short for some protocols, expecially
- * since the timeout is currently set to 250ms. Increase it to 500ms,
- * to avoid wrong repetition of the keycodes.
- */
- input_dev->rep[REP_DELAY] = 500;
-
- return 0;
-
-out_event:
- ir_unregister_class(input_dev);
-out_table:
- ir_free_table(&ir_dev->rc_tab);
-out_name:
- kfree(ir_dev->driver_name);
-out_dev:
- kfree(ir_dev);
- return rc;
-}
-EXPORT_SYMBOL_GPL(__ir_input_register);
-
-/**
- * ir_input_unregister() - unregisters IR and frees resources
- * @input_dev: the struct input_dev descriptor of the device
-
- * This routine is used to free memory and de-register interfaces.
- */
-void ir_input_unregister(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
- if (!ir_dev)
- return;
-
- IR_dprintk(1, "Freed keycode table\n");
-
- del_timer_sync(&ir_dev->timer_keyup);
- if (ir_dev->props)
- if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
- ir_raw_event_unregister(input_dev);
-
- ir_free_table(&ir_dev->rc_tab);
-
- ir_unregister_class(input_dev);
-
- kfree(ir_dev->driver_name);
- kfree(ir_dev);
-}
-EXPORT_SYMBOL_GPL(ir_input_unregister);
-
-int ir_core_debug; /* ir_debug level (0,1,2) */
-EXPORT_SYMBOL_GPL(ir_core_debug);
-module_param_named(debug, ir_core_debug, int, 0644);
-
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
deleted file mode 100644
index a06a07e..0000000
--- a/drivers/media/IR/ir-raw-event.c
+++ /dev/null
@@ -1,382 +0,0 @@
-/* ir-raw-event.c - handle IR Pulse/Space event
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kthread.h>
-#include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/freezer.h>
-#include "ir-core-priv.h"
-
-/* Define the max number of pulse/space transitions to buffer */
-#define MAX_IR_EVENT_SIZE 512
-
-/* Used to keep track of IR raw clients, protected by ir_raw_handler_lock */
-static LIST_HEAD(ir_raw_client_list);
-
-/* Used to handle IR raw handler extensions */
-static DEFINE_MUTEX(ir_raw_handler_lock);
-static LIST_HEAD(ir_raw_handler_list);
-static u64 available_protocols;
-
-#ifdef MODULE
-/* Used to load the decoders */
-static struct work_struct wq_load;
-#endif
-
-static int ir_raw_event_thread(void *data)
-{
- struct ir_raw_event ev;
- struct ir_raw_handler *handler;
- struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data;
- int retval;
-
- while (!kthread_should_stop()) {
-
- spin_lock_irq(&raw->lock);
- retval = kfifo_out(&raw->kfifo, &ev, sizeof(ev));
-
- if (!retval) {
- set_current_state(TASK_INTERRUPTIBLE);
-
- if (kthread_should_stop())
- set_current_state(TASK_RUNNING);
-
- spin_unlock_irq(&raw->lock);
- schedule();
- continue;
- }
-
- spin_unlock_irq(&raw->lock);
-
-
- BUG_ON(retval != sizeof(ev));
-
- mutex_lock(&ir_raw_handler_lock);
- list_for_each_entry(handler, &ir_raw_handler_list, list)
- handler->decode(raw->input_dev, ev);
- raw->prev_ev = ev;
- mutex_unlock(&ir_raw_handler_lock);
- }
-
- return 0;
-}
-
-/**
- * ir_raw_event_store() - pass a pulse/space duration to the raw ir decoders
- * @input_dev: the struct input_dev device descriptor
- * @ev: the struct ir_raw_event descriptor of the pulse/space
- *
- * This routine (which may be called from an interrupt context) stores a
- * pulse/space duration for the raw ir decoding state machines. Pulses are
- * signalled as positive values and spaces as negative values. A zero value
- * will reset the decoding state machines.
- */
-int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev)
-{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
-
- if (!ir->raw)
- return -EINVAL;
-
- IR_dprintk(2, "sample: (%05dus %s)\n",
- TO_US(ev->duration), TO_STR(ev->pulse));
-
- if (kfifo_in(&ir->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
- return -ENOMEM;
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_store);
-
-/**
- * ir_raw_event_store_edge() - notify raw ir decoders of the start of a pulse/space
- * @input_dev: the struct input_dev device descriptor
- * @type: the type of the event that has occurred
- *
- * This routine (which may be called from an interrupt context) is used to
- * store the beginning of an ir pulse or space (or the start/end of ir
- * reception) for the raw ir decoding state machines. This is used by
- * hardware which does not provide durations directly but only interrupts
- * (or similar events) on state change.
- */
-int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type)
-{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
- ktime_t now;
- s64 delta; /* ns */
- struct ir_raw_event ev;
- int rc = 0;
-
- if (!ir->raw)
- return -EINVAL;
-
- now = ktime_get();
- delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
-
- /* Check for a long duration since last event or if we're
- * being called for the first time, note that delta can't
- * possibly be negative.
- */
- ev.duration = 0;
- if (delta > IR_MAX_DURATION || !ir->raw->last_type)
- type |= IR_START_EVENT;
- else
- ev.duration = delta;
-
- if (type & IR_START_EVENT)
- ir_raw_event_reset(input_dev);
- else if (ir->raw->last_type & IR_SPACE) {
- ev.pulse = false;
- rc = ir_raw_event_store(input_dev, &ev);
- } else if (ir->raw->last_type & IR_PULSE) {
- ev.pulse = true;
- rc = ir_raw_event_store(input_dev, &ev);
- } else
- return 0;
-
- ir->raw->last_event = now;
- ir->raw->last_type = type;
- return rc;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
-
-/**
- * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
- * @input_dev: the struct input_dev device descriptor
- * @type: the type of the event that has occurred
- *
- * This routine (which may be called from an interrupt context) works
- * in similiar manner to ir_raw_event_store_edge.
- * This routine is intended for devices with limited internal buffer
- * It automerges samples of same type, and handles timeouts
- */
-int ir_raw_event_store_with_filter(struct input_dev *input_dev,
- struct ir_raw_event *ev)
-{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
- struct ir_raw_event_ctrl *raw = ir->raw;
-
- if (!raw || !ir->props)
- return -EINVAL;
-
- /* Ignore spaces in idle mode */
- if (ir->idle && !ev->pulse)
- return 0;
- else if (ir->idle)
- ir_raw_event_set_idle(input_dev, false);
-
- if (!raw->this_ev.duration) {
- raw->this_ev = *ev;
- } else if (ev->pulse == raw->this_ev.pulse) {
- raw->this_ev.duration += ev->duration;
- } else {
- ir_raw_event_store(input_dev, &raw->this_ev);
- raw->this_ev = *ev;
- }
-
- /* Enter idle mode if nessesary */
- if (!ev->pulse && ir->props->timeout &&
- raw->this_ev.duration >= ir->props->timeout) {
- ir_raw_event_set_idle(input_dev, true);
- }
- return 0;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
-
-/**
- * ir_raw_event_set_idle() - hint the ir core if device is receiving
- * IR data or not
- * @input_dev: the struct input_dev device descriptor
- * @idle: the hint value
- */
-void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle)
-{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
- struct ir_raw_event_ctrl *raw = ir->raw;
-
- if (!ir->props || !ir->raw)
- return;
-
- IR_dprintk(2, "%s idle mode\n", idle ? "enter" : "leave");
-
- if (idle) {
- raw->this_ev.timeout = true;
- ir_raw_event_store(input_dev, &raw->this_ev);
- init_ir_raw_event(&raw->this_ev);
- }
-
- if (ir->props->s_idle)
- ir->props->s_idle(ir->props->priv, idle);
- ir->idle = idle;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
-
-/**
- * ir_raw_event_handle() - schedules the decoding of stored ir data
- * @input_dev: the struct input_dev device descriptor
- *
- * This routine will signal the workqueue to start decoding stored ir data.
- */
-void ir_raw_event_handle(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
- unsigned long flags;
-
- if (!ir->raw)
- return;
-
- spin_lock_irqsave(&ir->raw->lock, flags);
- wake_up_process(ir->raw->thread);
- spin_unlock_irqrestore(&ir->raw->lock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_handle);
-
-/* used internally by the sysfs interface */
-u64
-ir_raw_get_allowed_protocols()
-{
- u64 protocols;
- mutex_lock(&ir_raw_handler_lock);
- protocols = available_protocols;
- mutex_unlock(&ir_raw_handler_lock);
- return protocols;
-}
-
-/*
- * Used to (un)register raw event clients
- */
-int ir_raw_event_register(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
- int rc;
- struct ir_raw_handler *handler;
-
- ir->raw = kzalloc(sizeof(*ir->raw), GFP_KERNEL);
- if (!ir->raw)
- return -ENOMEM;
-
- ir->raw->input_dev = input_dev;
-
- ir->raw->enabled_protocols = ~0;
- rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE,
- GFP_KERNEL);
- if (rc < 0) {
- kfree(ir->raw);
- ir->raw = NULL;
- return rc;
- }
-
- spin_lock_init(&ir->raw->lock);
- ir->raw->thread = kthread_run(ir_raw_event_thread, ir->raw,
- "rc%u", (unsigned int)ir->devno);
-
- if (IS_ERR(ir->raw->thread)) {
- int ret = PTR_ERR(ir->raw->thread);
-
- kfree(ir->raw);
- ir->raw = NULL;
- return ret;
- }
-
- mutex_lock(&ir_raw_handler_lock);
- list_add_tail(&ir->raw->list, &ir_raw_client_list);
- list_for_each_entry(handler, &ir_raw_handler_list, list)
- if (handler->raw_register)
- handler->raw_register(ir->raw->input_dev);
- mutex_unlock(&ir_raw_handler_lock);
-
- return 0;
-}
-
-void ir_raw_event_unregister(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
- struct ir_raw_handler *handler;
-
- if (!ir->raw)
- return;
-
- kthread_stop(ir->raw->thread);
-
- mutex_lock(&ir_raw_handler_lock);
- list_del(&ir->raw->list);
- list_for_each_entry(handler, &ir_raw_handler_list, list)
- if (handler->raw_unregister)
- handler->raw_unregister(ir->raw->input_dev);
- mutex_unlock(&ir_raw_handler_lock);
-
- kfifo_free(&ir->raw->kfifo);
- kfree(ir->raw);
- ir->raw = NULL;
-}
-
-/*
- * Extension interface - used to register the IR decoders
- */
-
-int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler)
-{
- struct ir_raw_event_ctrl *raw;
-
- mutex_lock(&ir_raw_handler_lock);
- list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
- if (ir_raw_handler->raw_register)
- list_for_each_entry(raw, &ir_raw_client_list, list)
- ir_raw_handler->raw_register(raw->input_dev);
- available_protocols |= ir_raw_handler->protocols;
- mutex_unlock(&ir_raw_handler_lock);
-
- return 0;
-}
-EXPORT_SYMBOL(ir_raw_handler_register);
-
-void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler)
-{
- struct ir_raw_event_ctrl *raw;
-
- mutex_lock(&ir_raw_handler_lock);
- list_del(&ir_raw_handler->list);
- if (ir_raw_handler->raw_unregister)
- list_for_each_entry(raw, &ir_raw_client_list, list)
- ir_raw_handler->raw_unregister(raw->input_dev);
- available_protocols &= ~ir_raw_handler->protocols;
- mutex_unlock(&ir_raw_handler_lock);
-}
-EXPORT_SYMBOL(ir_raw_handler_unregister);
-
-#ifdef MODULE
-static void init_decoders(struct work_struct *work)
-{
- /* Load the decoder modules */
-
- load_nec_decode();
- load_rc5_decode();
- load_rc6_decode();
- load_jvc_decode();
- load_sony_decode();
- load_lirc_codec();
-
- /* If needed, we may later add some init code. In this case,
- it is needed to change the CONFIG_MODULE test at ir-core.h
- */
-}
-#endif
-
-void ir_raw_init(void)
-{
-#ifdef MODULE
- INIT_WORK(&wq_load, init_decoders);
- schedule_work(&wq_load);
-#endif
-}
diff --git a/drivers/media/IR/ir-sysfs.c b/drivers/media/IR/ir-sysfs.c
deleted file mode 100644
index 38423a8..0000000
--- a/drivers/media/IR/ir-sysfs.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/* ir-sysfs.c - sysfs interface for RC devices (/sys/class/rc)
- *
- * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/device.h>
-#include "ir-core-priv.h"
-
-#define IRRCV_NUM_DEVICES 256
-
-/* bit array to represent IR sysfs device number */
-static unsigned long ir_core_dev_number;
-
-/* class for /sys/class/rc */
-static char *ir_devnode(struct device *dev, mode_t *mode)
-{
- return kasprintf(GFP_KERNEL, "rc/%s", dev_name(dev));
-}
-
-static struct class ir_input_class = {
- .name = "rc",
- .devnode = ir_devnode,
-};
-
-static struct {
- u64 type;
- char *name;
-} proto_names[] = {
- { IR_TYPE_UNKNOWN, "unknown" },
- { IR_TYPE_RC5, "rc-5" },
- { IR_TYPE_NEC, "nec" },
- { IR_TYPE_RC6, "rc-6" },
- { IR_TYPE_JVC, "jvc" },
- { IR_TYPE_SONY, "sony" },
- { IR_TYPE_RC5_SZ, "rc-5-sz" },
- { IR_TYPE_LIRC, "lirc" },
-};
-
-#define PROTO_NONE "none"
-
-/**
- * show_protocols() - shows the current IR protocol(s)
- * @d: the device descriptor
- * @mattr: the device attribute struct (unused)
- * @buf: a pointer to the output buffer
- *
- * This routine is a callback routine for input read the IR protocol type(s).
- * it is trigged by reading /sys/class/rc/rc?/protocols.
- * It returns the protocol names of supported protocols.
- * Enabled protocols are printed in brackets.
- */
-static ssize_t show_protocols(struct device *d,
- struct device_attribute *mattr, char *buf)
-{
- struct ir_input_dev *ir_dev = dev_get_drvdata(d);
- u64 allowed, enabled;
- char *tmp = buf;
- int i;
-
- /* Device is being removed */
- if (!ir_dev)
- return -EINVAL;
-
- if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
- enabled = ir_dev->rc_tab.ir_type;
- allowed = ir_dev->props->allowed_protos;
- } else if (ir_dev->raw) {
- enabled = ir_dev->raw->enabled_protocols;
- allowed = ir_raw_get_allowed_protocols();
- } else
- return sprintf(tmp, "[builtin]\n");
-
- IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
- (long long)allowed,
- (long long)enabled);
-
- for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
- if (allowed & enabled & proto_names[i].type)
- tmp += sprintf(tmp, "[%s] ", proto_names[i].name);
- else if (allowed & proto_names[i].type)
- tmp += sprintf(tmp, "%s ", proto_names[i].name);
- }
-
- if (tmp != buf)
- tmp--;
- *tmp = '\n';
- return tmp + 1 - buf;
-}
-
-/**
- * store_protocols() - changes the current IR protocol(s)
- * @d: the device descriptor
- * @mattr: the device attribute struct (unused)
- * @buf: a pointer to the input buffer
- * @len: length of the input buffer
- *
- * This routine is a callback routine for changing the IR protocol type.
- * It is trigged by writing to /sys/class/rc/rc?/protocols.
- * Writing "+proto" will add a protocol to the list of enabled protocols.
- * Writing "-proto" will remove a protocol from the list of enabled protocols.
- * Writing "proto" will enable only "proto".
- * Writing "none" will disable all protocols.
- * Returns -EINVAL if an invalid protocol combination or unknown protocol name
- * is used, otherwise @len.
- */
-static ssize_t store_protocols(struct device *d,
- struct device_attribute *mattr,
- const char *data,
- size_t len)
-{
- struct ir_input_dev *ir_dev = dev_get_drvdata(d);
- bool enable, disable;
- const char *tmp;
- u64 type;
- u64 mask;
- int rc, i, count = 0;
- unsigned long flags;
-
- /* Device is being removed */
- if (!ir_dev)
- return -EINVAL;
-
- if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
- type = ir_dev->rc_tab.ir_type;
- else if (ir_dev->raw)
- type = ir_dev->raw->enabled_protocols;
- else {
- IR_dprintk(1, "Protocol switching not supported\n");
- return -EINVAL;
- }
-
- while ((tmp = strsep((char **) &data, " \n")) != NULL) {
- if (!*tmp)
- break;
-
- if (*tmp == '+') {
- enable = true;
- disable = false;
- tmp++;
- } else if (*tmp == '-') {
- enable = false;
- disable = true;
- tmp++;
- } else {
- enable = false;
- disable = false;
- }
-
- if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) {
- tmp += sizeof(PROTO_NONE);
- mask = 0;
- count++;
- } else {
- for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
- if (!strncasecmp(tmp, proto_names[i].name, strlen(proto_names[i].name))) {
- tmp += strlen(proto_names[i].name);
- mask = proto_names[i].type;
- break;
- }
- }
- if (i == ARRAY_SIZE(proto_names)) {
- IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
- return -EINVAL;
- }
- count++;
- }
-
- if (enable)
- type |= mask;
- else if (disable)
- type &= ~mask;
- else
- type = mask;
- }
-
- if (!count) {
- IR_dprintk(1, "Protocol not specified\n");
- return -EINVAL;
- }
-
- if (ir_dev->props && ir_dev->props->change_protocol) {
- rc = ir_dev->props->change_protocol(ir_dev->props->priv,
- type);
- if (rc < 0) {
- IR_dprintk(1, "Error setting protocols to 0x%llx\n",
- (long long)type);
- return -EINVAL;
- }
- }
-
- if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
- spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
- ir_dev->rc_tab.ir_type = type;
- spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
- } else {
- ir_dev->raw->enabled_protocols = type;
- }
-
- IR_dprintk(1, "Current protocol(s): 0x%llx\n",
- (long long)type);
-
- return len;
-}
-
-#define ADD_HOTPLUG_VAR(fmt, val...) \
- do { \
- int err = add_uevent_var(env, fmt, val); \
- if (err) \
- return err; \
- } while (0)
-
-static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
-{
- struct ir_input_dev *ir_dev = dev_get_drvdata(device);
-
- if (ir_dev->rc_tab.name)
- ADD_HOTPLUG_VAR("NAME=%s", ir_dev->rc_tab.name);
- if (ir_dev->driver_name)
- ADD_HOTPLUG_VAR("DRV_NAME=%s", ir_dev->driver_name);
-
- return 0;
-}
-
-/*
- * Static device attribute struct with the sysfs attributes for IR's
- */
-static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR,
- show_protocols, store_protocols);
-
-static struct attribute *rc_dev_attrs[] = {
- &dev_attr_protocols.attr,
- NULL,
-};
-
-static struct attribute_group rc_dev_attr_grp = {
- .attrs = rc_dev_attrs,
-};
-
-static const struct attribute_group *rc_dev_attr_groups[] = {
- &rc_dev_attr_grp,
- NULL
-};
-
-static struct device_type rc_dev_type = {
- .groups = rc_dev_attr_groups,
- .uevent = rc_dev_uevent,
-};
-
-/**
- * ir_register_class() - creates the sysfs for /sys/class/rc/rc?
- * @input_dev: the struct input_dev descriptor of the device
- *
- * This routine is used to register the syfs code for IR class
- */
-int ir_register_class(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- int devno = find_first_zero_bit(&ir_core_dev_number,
- IRRCV_NUM_DEVICES);
-
- if (unlikely(devno < 0))
- return devno;
-
- ir_dev->dev.type = &rc_dev_type;
- ir_dev->devno = devno;
-
- ir_dev->dev.class = &ir_input_class;
- ir_dev->dev.parent = input_dev->dev.parent;
- input_dev->dev.parent = &ir_dev->dev;
- dev_set_name(&ir_dev->dev, "rc%d", devno);
- dev_set_drvdata(&ir_dev->dev, ir_dev);
- return device_register(&ir_dev->dev);
-};
-
-/**
- * ir_register_input - registers ir input device with input subsystem
- * @input_dev: the struct input_dev descriptor of the device
- */
-
-int ir_register_input(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- int rc;
- const char *path;
-
-
- rc = input_register_device(input_dev);
- if (rc < 0) {
- device_del(&ir_dev->dev);
- return rc;
- }
-
- __module_get(THIS_MODULE);
-
- path = kobject_get_path(&ir_dev->dev.kobj, GFP_KERNEL);
- printk(KERN_INFO "%s: %s as %s\n",
- dev_name(&ir_dev->dev),
- input_dev->name ? input_dev->name : "Unspecified device",
- path ? path : "N/A");
- kfree(path);
-
- set_bit(ir_dev->devno, &ir_core_dev_number);
- return 0;
-}
-
-/**
- * ir_unregister_class() - removes the sysfs for sysfs for
- * /sys/class/rc/rc?
- * @input_dev: the struct input_dev descriptor of the device
- *
- * This routine is used to unregister the syfs code for IR class
- */
-void ir_unregister_class(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
- input_set_drvdata(input_dev, NULL);
- clear_bit(ir_dev->devno, &ir_core_dev_number);
- input_unregister_device(input_dev);
- device_del(&ir_dev->dev);
-
- module_put(THIS_MODULE);
-}
-
-/*
- * Init/exit code for the module. Basically, creates/removes /sys/class/rc
- */
-
-static int __init ir_core_init(void)
-{
- int rc = class_register(&ir_input_class);
- if (rc) {
- printk(KERN_ERR "ir_core: unable to register rc class\n");
- return rc;
- }
-
- /* Initialize/load the decoders/keymap code that will be used */
- ir_raw_init();
- ir_rcmap_init();
-
- return 0;
-}
-
-static void __exit ir_core_exit(void)
-{
- class_unregister(&ir_input_class);
- ir_rcmap_cleanup();
-}
-
-module_init(ir_core_init);
-module_exit(ir_core_exit);
diff --git a/drivers/media/IR/rc-main.c b/drivers/media/IR/rc-main.c
new file mode 100644
index 0000000..93a5fdc
--- /dev/null
+++ b/drivers/media/IR/rc-main.c
@@ -0,0 +1,1198 @@
+/* rc-core.c - Remote Control core module
+ *
+ * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <media/ir-core.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include "ir-core-priv.h"
+
+#define IRRCV_NUM_DEVICES 256
+
+/* bit array to represent IR sysfs device number */
+static unsigned long ir_core_dev_number;
+
+/* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */
+#define IR_TAB_MIN_SIZE 256
+#define IR_TAB_MAX_SIZE 8192
+
+/* FIXME: IR_KEYPRESS_TIMEOUT should be protocol specific */
+#define IR_KEYPRESS_TIMEOUT 250
+
+/* Used to keep track of known keymaps */
+static LIST_HEAD(rc_map_list);
+static DEFINE_SPINLOCK(rc_map_lock);
+
+/* Forward declarations */
+static int ir_register_class(struct input_dev *input_dev);
+static void ir_unregister_class(struct input_dev *input_dev);
+static int ir_register_input(struct input_dev *input_dev)
+
+
+static struct rc_keymap *seek_rc_map(const char *name)
+{
+ struct rc_keymap *map = NULL;
+
+ spin_lock(&rc_map_lock);
+ list_for_each_entry(map, &rc_map_list, list) {
+ if (!strcmp(name, map->map.name)) {
+ spin_unlock(&rc_map_lock);
+ return map;
+ }
+ }
+ spin_unlock(&rc_map_lock);
+
+ return NULL;
+}
+
+struct ir_scancode_table *get_rc_map(const char *name)
+{
+
+ struct rc_keymap *map;
+
+ map = seek_rc_map(name);
+#ifdef MODULE
+ if (!map) {
+ int rc = request_module(name);
+ if (rc < 0) {
+ printk(KERN_ERR "Couldn't load IR keymap %s\n", name);
+ return NULL;
+ }
+ msleep(20); /* Give some time for IR to register */
+
+ map = seek_rc_map(name);
+ }
+#endif
+ if (!map) {
+ printk(KERN_ERR "IR keymap %s not found\n", name);
+ return NULL;
+ }
+
+ printk(KERN_INFO "Registered IR keymap %s\n", map->map.name);
+
+ return &map->map;
+}
+EXPORT_SYMBOL_GPL(get_rc_map);
+
+int ir_register_map(struct rc_keymap *map)
+{
+ spin_lock(&rc_map_lock);
+ list_add_tail(&map->list, &rc_map_list);
+ spin_unlock(&rc_map_lock);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ir_register_map);
+
+void ir_unregister_map(struct rc_keymap *map)
+{
+ spin_lock(&rc_map_lock);
+ list_del(&map->list);
+ spin_unlock(&rc_map_lock);
+}
+EXPORT_SYMBOL_GPL(ir_unregister_map);
+
+
+static struct ir_scancode empty[] = {
+ { 0x2a, KEY_COFFEE },
+};
+
+static struct rc_keymap empty_map = {
+ .map = {
+ .scan = empty,
+ .size = ARRAY_SIZE(empty),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_EMPTY,
+ }
+};
+
+/**
+ * ir_create_table() - initializes a scancode table
+ * @rc_tab: the ir_scancode_table to initialize
+ * @name: name to assign to the table
+ * @ir_type: ir type to assign to the new table
+ * @size: initial size of the table
+ * @return: zero on success or a negative error code
+ *
+ * This routine will initialize the ir_scancode_table and will allocate
+ * memory to hold at least the specified number elements.
+ */
+static int ir_create_table(struct ir_scancode_table *rc_tab,
+ const char *name, u64 ir_type, size_t size)
+{
+ rc_tab->name = name;
+ rc_tab->ir_type = ir_type;
+ rc_tab->alloc = roundup_pow_of_two(size * sizeof(struct ir_scancode));
+ rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
+ rc_tab->scan = kmalloc(rc_tab->alloc, GFP_KERNEL);
+ if (!rc_tab->scan)
+ return -ENOMEM;
+
+ IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
+ rc_tab->size, rc_tab->alloc);
+ return 0;
+}
+
+/**
+ * ir_free_table() - frees memory allocated by a scancode table
+ * @rc_tab: the table whose mappings need to be freed
+ *
+ * This routine will free memory alloctaed for key mappings used by given
+ * scancode table.
+ */
+static void ir_free_table(struct ir_scancode_table *rc_tab)
+{
+ rc_tab->size = 0;
+ kfree(rc_tab->scan);
+ rc_tab->scan = NULL;
+}
+
+/**
+ * ir_resize_table() - resizes a scancode table if necessary
+ * @rc_tab: the ir_scancode_table to resize
+ * @gfp_flags: gfp flags to use when allocating memory
+ * @return: zero on success or a negative error code
+ *
+ * This routine will shrink the ir_scancode_table if it has lots of
+ * unused entries and grow it if it is full.
+ */
+static int ir_resize_table(struct ir_scancode_table *rc_tab, gfp_t gfp_flags)
+{
+ unsigned int oldalloc = rc_tab->alloc;
+ unsigned int newalloc = oldalloc;
+ struct ir_scancode *oldscan = rc_tab->scan;
+ struct ir_scancode *newscan;
+
+ if (rc_tab->size == rc_tab->len) {
+ /* All entries in use -> grow keytable */
+ if (rc_tab->alloc >= IR_TAB_MAX_SIZE)
+ return -ENOMEM;
+
+ newalloc *= 2;
+ IR_dprintk(1, "Growing table to %u bytes\n", newalloc);
+ }
+
+ if ((rc_tab->len * 3 < rc_tab->size) && (oldalloc > IR_TAB_MIN_SIZE)) {
+ /* Less than 1/3 of entries in use -> shrink keytable */
+ newalloc /= 2;
+ IR_dprintk(1, "Shrinking table to %u bytes\n", newalloc);
+ }
+
+ if (newalloc == oldalloc)
+ return 0;
+
+ newscan = kmalloc(newalloc, gfp_flags);
+ if (!newscan) {
+ IR_dprintk(1, "Failed to kmalloc %u bytes\n", newalloc);
+ return -ENOMEM;
+ }
+
+ memcpy(newscan, rc_tab->scan, rc_tab->len * sizeof(struct ir_scancode));
+ rc_tab->scan = newscan;
+ rc_tab->alloc = newalloc;
+ rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
+ kfree(oldscan);
+ return 0;
+}
+
+/**
+ * ir_update_mapping() - set a keycode in the scancode->keycode table
+ * @dev: the struct input_dev device descriptor
+ * @rc_tab: scancode table to be adjusted
+ * @index: index of the mapping that needs to be updated
+ * @keycode: the desired keycode
+ * @return: previous keycode assigned to the mapping
+ *
+ * This routine is used to update scancode->keycopde mapping at given
+ * position.
+ */
+static unsigned int ir_update_mapping(struct input_dev *dev,
+ struct ir_scancode_table *rc_tab,
+ unsigned int index,
+ unsigned int new_keycode)
+{
+ int old_keycode = rc_tab->scan[index].keycode;
+ int i;
+
+ /* Did the user wish to remove the mapping? */
+ if (new_keycode == KEY_RESERVED || new_keycode == KEY_UNKNOWN) {
+ IR_dprintk(1, "#%d: Deleting scan 0x%04x\n",
+ index, rc_tab->scan[index].scancode);
+ rc_tab->len--;
+ memmove(&rc_tab->scan[index], &rc_tab->scan[index+ 1],
+ (rc_tab->len - index) * sizeof(struct ir_scancode));
+ } else {
+ IR_dprintk(1, "#%d: %s scan 0x%04x with key 0x%04x\n",
+ index,
+ old_keycode == KEY_RESERVED ? "New" : "Replacing",
+ rc_tab->scan[index].scancode, new_keycode);
+ rc_tab->scan[index].keycode = new_keycode;
+ __set_bit(new_keycode, dev->keybit);
+ }
+
+ if (old_keycode != KEY_RESERVED) {
+ /* A previous mapping was updated... */
+ __clear_bit(old_keycode, dev->keybit);
+ /* ... but another scancode might use the same keycode */
+ for (i = 0; i < rc_tab->len; i++) {
+ if (rc_tab->scan[i].keycode == old_keycode) {
+ __set_bit(old_keycode, dev->keybit);
+ break;
+ }
+ }
+
+ /* Possibly shrink the keytable, failure is not a problem */
+ ir_resize_table(rc_tab, GFP_ATOMIC);
+ }
+
+ return old_keycode;
+}
+
+/**
+ * ir_establish_scancode() - set a keycode in the scancode->keycode table
+ * @ir_dev: the struct ir_input_dev device descriptor
+ * @rc_tab: scancode table to be searched
+ * @scancode: the desired scancode
+ * @resize: controls whether we allowed to resize the table to
+ * accomodate not yet present scancodes
+ * @return: index of the mapping containing scancode in question
+ * or -1U in case of failure.
+ *
+ * This routine is used to locate given scancode in ir_scancode_table.
+ * If scancode is not yet present the routine will allocate a new slot
+ * for it.
+ */
+static unsigned int ir_establish_scancode(struct ir_input_dev *ir_dev,
+ struct ir_scancode_table *rc_tab,
+ unsigned int scancode,
+ bool resize)
+{
+ unsigned int i;
+
+ /*
+ * Unfortunately, some hardware-based IR decoders don't provide
+ * all bits for the complete IR code. In general, they provide only
+ * the command part of the IR code. Yet, as it is possible to replace
+ * the provided IR with another one, it is needed to allow loading
+ * IR tables from other remotes. So,
+ */
+ if (ir_dev->props && ir_dev->props->scanmask)
+ scancode &= ir_dev->props->scanmask;
+
+ /* First check if we already have a mapping for this ir command */
+ for (i = 0; i < rc_tab->len; i++) {
+ if (rc_tab->scan[i].scancode == scancode)
+ return i;
+
+ /* Keytable is sorted from lowest to highest scancode */
+ if (rc_tab->scan[i].scancode >= scancode)
+ break;
+ }
+
+ /* No previous mapping found, we might need to grow the table */
+ if (rc_tab->size == rc_tab->len) {
+ if (!resize || ir_resize_table(rc_tab, GFP_ATOMIC))
+ return -1U;
+ }
+
+ /* i is the proper index to insert our new keycode */
+ if (i < rc_tab->len)
+ memmove(&rc_tab->scan[i + 1], &rc_tab->scan[i],
+ (rc_tab->len - i) * sizeof(struct ir_scancode));
+ rc_tab->scan[i].scancode = scancode;
+ rc_tab->scan[i].keycode = KEY_RESERVED;
+ rc_tab->len++;
+
+ return i;
+}
+
+/**
+ * ir_setkeycode() - set a keycode in the scancode->keycode table
+ * @dev: the struct input_dev device descriptor
+ * @scancode: the desired scancode
+ * @keycode: result
+ * @return: -EINVAL if the keycode could not be inserted, otherwise zero.
+ *
+ * This routine is used to handle evdev EVIOCSKEY ioctl.
+ */
+static int ir_setkeycode(struct input_dev *dev,
+ const struct input_keymap_entry *ke,
+ unsigned int *old_keycode)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(dev);
+ struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+ unsigned int index;
+ unsigned int scancode;
+ int retval;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rc_tab->lock, flags);
+
+ if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
+ index = ke->index;
+ if (index >= rc_tab->len) {
+ retval = -EINVAL;
+ goto out;
+ }
+ } else {
+ retval = input_scancode_to_scalar(ke, &scancode);
+ if (retval)
+ goto out;
+
+ index = ir_establish_scancode(ir_dev, rc_tab, scancode, true);
+ if (index >= rc_tab->len) {
+ retval = -ENOMEM;
+ goto out;
+ }
+ }
+
+ *old_keycode = ir_update_mapping(dev, rc_tab, index, ke->keycode);
+
+out:
+ spin_unlock_irqrestore(&rc_tab->lock, flags);
+ return retval;
+}
+
+/**
+ * ir_setkeytable() - sets several entries in the scancode->keycode table
+ * @dev: the struct input_dev device descriptor
+ * @to: the struct ir_scancode_table to copy entries to
+ * @from: the struct ir_scancode_table to copy entries from
+ * @return: -ENOMEM if all keycodes could not be inserted, otherwise zero.
+ *
+ * This routine is used to handle table initialization.
+ */
+static int ir_setkeytable(struct ir_input_dev *ir_dev,
+ const struct ir_scancode_table *from)
+{
+ struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+ unsigned int i, index;
+ int rc;
+
+ rc = ir_create_table(&ir_dev->rc_tab,
+ from->name, from->ir_type, from->size);
+ if (rc)
+ return rc;
+
+ IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
+ rc_tab->size, rc_tab->alloc);
+
+ for (i = 0; i < from->size; i++) {
+ index = ir_establish_scancode(ir_dev, rc_tab,
+ from->scan[i].scancode, false);
+ if (index >= rc_tab->len) {
+ rc = -ENOMEM;
+ break;
+ }
+
+ ir_update_mapping(ir_dev->input_dev, rc_tab, index,
+ from->scan[i].keycode);
+ }
+
+ if (rc)
+ ir_free_table(rc_tab);
+
+ return rc;
+}
+
+/**
+ * ir_lookup_by_scancode() - locate mapping by scancode
+ * @rc_tab: the &struct ir_scancode_table to search
+ * @scancode: scancode to look for in the table
+ * @return: index in the table, -1U if not found
+ *
+ * This routine performs binary search in RC keykeymap table for
+ * given scancode.
+ */
+static unsigned int ir_lookup_by_scancode(const struct ir_scancode_table *rc_tab,
+ unsigned int scancode)
+{
+ unsigned int start = 0;
+ unsigned int end = rc_tab->len - 1;
+ unsigned int mid;
+
+ while (start <= end) {
+ mid = (start + end) / 2;
+ if (rc_tab->scan[mid].scancode < scancode)
+ start = mid + 1;
+ else if (rc_tab->scan[mid].scancode > scancode)
+ end = mid - 1;
+ else
+ return mid;
+ }
+
+ return -1U;
+}
+
+/**
+ * ir_getkeycode() - get a keycode from the scancode->keycode table
+ * @dev: the struct input_dev device descriptor
+ * @scancode: the desired scancode
+ * @keycode: used to return the keycode, if found, or KEY_RESERVED
+ * @return: always returns zero.
+ *
+ * This routine is used to handle evdev EVIOCGKEY ioctl.
+ */
+static int ir_getkeycode(struct input_dev *dev,
+ struct input_keymap_entry *ke)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(dev);
+ struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+ struct ir_scancode *entry;
+ unsigned long flags;
+ unsigned int index;
+ unsigned int scancode;
+ int retval;
+
+ spin_lock_irqsave(&rc_tab->lock, flags);
+
+ if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
+ index = ke->index;
+ } else {
+ retval = input_scancode_to_scalar(ke, &scancode);
+ if (retval)
+ goto out;
+
+ index = ir_lookup_by_scancode(rc_tab, scancode);
+ }
+
+ if (index >= rc_tab->len) {
+ if (!(ke->flags & INPUT_KEYMAP_BY_INDEX))
+ IR_dprintk(1, "unknown key for scancode 0x%04x\n",
+ scancode);
+ retval = -EINVAL;
+ goto out;
+ }
+
+ entry = &rc_tab->scan[index];
+
+ ke->index = index;
+ ke->keycode = entry->keycode;
+ ke->len = sizeof(entry->scancode);
+ memcpy(ke->scancode, &entry->scancode, sizeof(entry->scancode));
+
+out:
+ spin_unlock_irqrestore(&rc_tab->lock, flags);
+ return retval;
+}
+
+/**
+ * ir_g_keycode_from_table() - gets the keycode that corresponds to a scancode
+ * @input_dev: the struct input_dev descriptor of the device
+ * @scancode: the scancode that we're seeking
+ *
+ * This routine is used by the input routines when a key is pressed at the
+ * IR. The scancode is received and needs to be converted into a keycode.
+ * If the key is not found, it returns KEY_RESERVED. Otherwise, returns the
+ * corresponding keycode from the table.
+ */
+u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(dev);
+ struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+ unsigned int keycode;
+ unsigned int index;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rc_tab->lock, flags);
+
+ index = ir_lookup_by_scancode(rc_tab, scancode);
+ keycode = index < rc_tab->len ?
+ rc_tab->scan[index].keycode : KEY_RESERVED;
+
+ spin_unlock_irqrestore(&rc_tab->lock, flags);
+
+ if (keycode != KEY_RESERVED)
+ IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
+ dev->name, scancode, keycode);
+
+ return keycode;
+}
+EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
+
+/**
+ * ir_do_keyup() - internal function to signal the release of a keypress
+ * @ir: the struct ir_input_dev descriptor of the device
+ *
+ * This function is used internally to release a keypress, it must be
+ * called with keylock held.
+ */
+static void ir_do_keyup(struct ir_input_dev *ir)
+{
+ if (!ir->keypressed)
+ return;
+
+ IR_dprintk(1, "keyup key 0x%04x\n", ir->last_keycode);
+ input_report_key(ir->input_dev, ir->last_keycode, 0);
+ input_sync(ir->input_dev);
+ ir->keypressed = false;
+}
+
+/**
+ * ir_keyup() - generates input event to signal the release of a keypress
+ * @dev: the struct input_dev descriptor of the device
+ *
+ * This routine is used to signal that a key has been released on the
+ * remote control.
+ */
+void ir_keyup(struct input_dev *dev)
+{
+ unsigned long flags;
+ struct ir_input_dev *ir = input_get_drvdata(dev);
+
+ spin_lock_irqsave(&ir->keylock, flags);
+ ir_do_keyup(ir);
+ spin_unlock_irqrestore(&ir->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_keyup);
+
+/**
+ * ir_timer_keyup() - generates a keyup event after a timeout
+ * @cookie: a pointer to struct ir_input_dev passed to setup_timer()
+ *
+ * This routine will generate a keyup event some time after a keydown event
+ * is generated when no further activity has been detected.
+ */
+static void ir_timer_keyup(unsigned long cookie)
+{
+ struct ir_input_dev *ir = (struct ir_input_dev *)cookie;
+ unsigned long flags;
+
+ /*
+ * ir->keyup_jiffies is used to prevent a race condition if a
+ * hardware interrupt occurs at this point and the keyup timer
+ * event is moved further into the future as a result.
+ *
+ * The timer will then be reactivated and this function called
+ * again in the future. We need to exit gracefully in that case
+ * to allow the input subsystem to do its auto-repeat magic or
+ * a keyup event might follow immediately after the keydown.
+ */
+ spin_lock_irqsave(&ir->keylock, flags);
+ if (time_is_before_eq_jiffies(ir->keyup_jiffies))
+ ir_do_keyup(ir);
+ spin_unlock_irqrestore(&ir->keylock, flags);
+}
+
+/**
+ * ir_repeat() - notifies the IR core that a key is still pressed
+ * @dev: the struct input_dev descriptor of the device
+ *
+ * This routine is used by IR decoders when a repeat message which does
+ * not include the necessary bits to reproduce the scancode has been
+ * received.
+ */
+void ir_repeat(struct input_dev *dev)
+{
+ unsigned long flags;
+ struct ir_input_dev *ir = input_get_drvdata(dev);
+
+ spin_lock_irqsave(&ir->keylock, flags);
+
+ input_event(dev, EV_MSC, MSC_SCAN, ir->last_scancode);
+
+ if (!ir->keypressed)
+ goto out;
+
+ ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
+ mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
+
+out:
+ spin_unlock_irqrestore(&ir->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_repeat);
+
+/**
+ * ir_do_keydown() - internal function to process a keypress
+ * @dev: the struct input_dev descriptor of the device
+ * @scancode: the scancode of the keypress
+ * @keycode: the keycode of the keypress
+ * @toggle: the toggle value of the keypress
+ *
+ * This function is used internally to register a keypress, it must be
+ * called with keylock held.
+ */
+static void ir_do_keydown(struct input_dev *dev, int scancode,
+ u32 keycode, u8 toggle)
+{
+ struct ir_input_dev *ir = input_get_drvdata(dev);
+
+ input_event(dev, EV_MSC, MSC_SCAN, scancode);
+
+ /* Repeat event? */
+ if (ir->keypressed &&
+ ir->last_scancode == scancode &&
+ ir->last_toggle == toggle)
+ return;
+
+ /* Release old keypress */
+ ir_do_keyup(ir);
+
+ ir->last_scancode = scancode;
+ ir->last_toggle = toggle;
+ ir->last_keycode = keycode;
+
+ if (keycode == KEY_RESERVED)
+ return;
+
+ /* Register a keypress */
+ ir->keypressed = true;
+ IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
+ dev->name, keycode, scancode);
+ input_report_key(dev, ir->last_keycode, 1);
+ input_sync(dev);
+}
+
+/**
+ * ir_keydown() - generates input event for a key press
+ * @dev: the struct input_dev descriptor of the device
+ * @scancode: the scancode that we're seeking
+ * @toggle: the toggle value (protocol dependent, if the protocol doesn't
+ * support toggle values, this should be set to zero)
+ *
+ * This routine is used by the input routines when a key is pressed at the
+ * IR. It gets the keycode for a scancode and reports an input event via
+ * input_report_key().
+ */
+void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
+{
+ unsigned long flags;
+ struct ir_input_dev *ir = input_get_drvdata(dev);
+ u32 keycode = ir_g_keycode_from_table(dev, scancode);
+
+ spin_lock_irqsave(&ir->keylock, flags);
+ ir_do_keydown(dev, scancode, keycode, toggle);
+
+ if (ir->keypressed) {
+ ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
+ mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
+ }
+ spin_unlock_irqrestore(&ir->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_keydown);
+
+/**
+ * ir_keydown_notimeout() - generates input event for a key press without
+ * an automatic keyup event at a later time
+ * @dev: the struct input_dev descriptor of the device
+ * @scancode: the scancode that we're seeking
+ * @toggle: the toggle value (protocol dependent, if the protocol doesn't
+ * support toggle values, this should be set to zero)
+ *
+ * This routine is used by the input routines when a key is pressed at the
+ * IR. It gets the keycode for a scancode and reports an input event via
+ * input_report_key(). The driver must manually call ir_keyup() at a later
+ * stage.
+ */
+void ir_keydown_notimeout(struct input_dev *dev, int scancode, u8 toggle)
+{
+ unsigned long flags;
+ struct ir_input_dev *ir = input_get_drvdata(dev);
+ u32 keycode = ir_g_keycode_from_table(dev, scancode);
+
+ spin_lock_irqsave(&ir->keylock, flags);
+ ir_do_keydown(dev, scancode, keycode, toggle);
+ spin_unlock_irqrestore(&ir->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_keydown_notimeout);
+
+static int ir_open(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+ return ir_dev->props->open(ir_dev->props->priv);
+}
+
+static void ir_close(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+ ir_dev->props->close(ir_dev->props->priv);
+}
+
+/**
+ * __ir_input_register() - sets the IR keycode table and add the handlers
+ * for keymap table get/set
+ * @input_dev: the struct input_dev descriptor of the device
+ * @rc_tab: the struct ir_scancode_table table of scancode/keymap
+ *
+ * This routine is used to initialize the input infrastructure
+ * to work with an IR.
+ * It will register the input/evdev interface for the device and
+ * register the syfs code for IR class
+ */
+int __ir_input_register(struct input_dev *input_dev,
+ const struct ir_scancode_table *rc_tab,
+ struct ir_dev_props *props,
+ const char *driver_name)
+{
+ struct ir_input_dev *ir_dev;
+ int rc;
+
+ if (rc_tab->scan == NULL || !rc_tab->size)
+ return -EINVAL;
+
+ ir_dev = kzalloc(sizeof(*ir_dev), GFP_KERNEL);
+ if (!ir_dev)
+ return -ENOMEM;
+
+ ir_dev->driver_name = kasprintf(GFP_KERNEL, "%s", driver_name);
+ if (!ir_dev->driver_name) {
+ rc = -ENOMEM;
+ goto out_dev;
+ }
+
+ input_dev->getkeycode_new = ir_getkeycode;
+ input_dev->setkeycode_new = ir_setkeycode;
+ input_set_drvdata(input_dev, ir_dev);
+ ir_dev->input_dev = input_dev;
+
+ spin_lock_init(&ir_dev->rc_tab.lock);
+ spin_lock_init(&ir_dev->keylock);
+ setup_timer(&ir_dev->timer_keyup, ir_timer_keyup, (unsigned long)ir_dev);
+
+ if (props) {
+ ir_dev->props = props;
+ if (props->open)
+ input_dev->open = ir_open;
+ if (props->close)
+ input_dev->close = ir_close;
+ }
+
+ set_bit(EV_KEY, input_dev->evbit);
+ set_bit(EV_REP, input_dev->evbit);
+ set_bit(EV_MSC, input_dev->evbit);
+ set_bit(MSC_SCAN, input_dev->mscbit);
+
+ rc = ir_setkeytable(ir_dev, rc_tab);
+ if (rc)
+ goto out_name;
+
+ rc = ir_register_class(input_dev);
+ if (rc < 0)
+ goto out_table;
+
+ if (ir_dev->props)
+ if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
+ rc = ir_raw_event_register(input_dev);
+ if (rc < 0)
+ goto out_event;
+ }
+
+ rc = ir_register_input(input_dev);
+ if (rc < 0)
+ goto out_event;
+
+ IR_dprintk(1, "Registered input device on %s for %s remote%s.\n",
+ driver_name, rc_tab->name,
+ (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
+ " in raw mode" : "");
+
+ /*
+ * Default delay of 250ms is too short for some protocols, expecially
+ * since the timeout is currently set to 250ms. Increase it to 500ms,
+ * to avoid wrong repetition of the keycodes.
+ */
+ input_dev->rep[REP_DELAY] = 500;
+
+ return 0;
+
+out_event:
+ ir_unregister_class(input_dev);
+out_table:
+ ir_free_table(&ir_dev->rc_tab);
+out_name:
+ kfree(ir_dev->driver_name);
+out_dev:
+ kfree(ir_dev);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(__ir_input_register);
+
+/**
+ * ir_input_unregister() - unregisters IR and frees resources
+ * @input_dev: the struct input_dev descriptor of the device
+
+ * This routine is used to free memory and de-register interfaces.
+ */
+void ir_input_unregister(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+ if (!ir_dev)
+ return;
+
+ IR_dprintk(1, "Freed keycode table\n");
+
+ del_timer_sync(&ir_dev->timer_keyup);
+ if (ir_dev->props)
+ if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
+ ir_raw_event_unregister(input_dev);
+
+ ir_free_table(&ir_dev->rc_tab);
+
+ ir_unregister_class(input_dev);
+
+ kfree(ir_dev->driver_name);
+ kfree(ir_dev);
+}
+EXPORT_SYMBOL_GPL(ir_input_unregister);
+
+/* class for /sys/class/rc */
+static char *ir_devnode(struct device *dev, mode_t *mode)
+{
+ return kasprintf(GFP_KERNEL, "rc/%s", dev_name(dev));
+}
+
+static struct class ir_input_class = {
+ .name = "rc",
+ .devnode = ir_devnode,
+};
+
+static struct {
+ u64 type;
+ char *name;
+} proto_names[] = {
+ { IR_TYPE_UNKNOWN, "unknown" },
+ { IR_TYPE_RC5, "rc-5" },
+ { IR_TYPE_NEC, "nec" },
+ { IR_TYPE_RC6, "rc-6" },
+ { IR_TYPE_JVC, "jvc" },
+ { IR_TYPE_SONY, "sony" },
+ { IR_TYPE_RC5_SZ, "rc-5-sz" },
+ { IR_TYPE_LIRC, "lirc" },
+};
+
+#define PROTO_NONE "none"
+
+/**
+ * show_protocols() - shows the current IR protocol(s)
+ * @d: the device descriptor
+ * @mattr: the device attribute struct (unused)
+ * @buf: a pointer to the output buffer
+ *
+ * This routine is a callback routine for input read the IR protocol type(s).
+ * it is trigged by reading /sys/class/rc/rc?/protocols.
+ * It returns the protocol names of supported protocols.
+ * Enabled protocols are printed in brackets.
+ */
+static ssize_t show_protocols(struct device *d,
+ struct device_attribute *mattr, char *buf)
+{
+ struct ir_input_dev *ir_dev = dev_get_drvdata(d);
+ u64 allowed, enabled;
+ char *tmp = buf;
+ int i;
+
+ /* Device is being removed */
+ if (!ir_dev)
+ return -EINVAL;
+
+ if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+ enabled = ir_dev->rc_tab.ir_type;
+ allowed = ir_dev->props->allowed_protos;
+ } else if (ir_dev->raw) {
+ enabled = ir_dev->raw->enabled_protocols;
+ allowed = ir_raw_get_allowed_protocols();
+ } else
+ return sprintf(tmp, "[builtin]\n");
+
+ IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
+ (long long)allowed,
+ (long long)enabled);
+
+ for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
+ if (allowed & enabled & proto_names[i].type)
+ tmp += sprintf(tmp, "[%s] ", proto_names[i].name);
+ else if (allowed & proto_names[i].type)
+ tmp += sprintf(tmp, "%s ", proto_names[i].name);
+ }
+
+ if (tmp != buf)
+ tmp--;
+ *tmp = '\n';
+ return tmp + 1 - buf;
+}
+
+/**
+ * store_protocols() - changes the current IR protocol(s)
+ * @d: the device descriptor
+ * @mattr: the device attribute struct (unused)
+ * @buf: a pointer to the input buffer
+ * @len: length of the input buffer
+ *
+ * This routine is a callback routine for changing the IR protocol type.
+ * It is trigged by writing to /sys/class/rc/rc?/protocols.
+ * Writing "+proto" will add a protocol to the list of enabled protocols.
+ * Writing "-proto" will remove a protocol from the list of enabled protocols.
+ * Writing "proto" will enable only "proto".
+ * Writing "none" will disable all protocols.
+ * Returns -EINVAL if an invalid protocol combination or unknown protocol name
+ * is used, otherwise @len.
+ */
+static ssize_t store_protocols(struct device *d,
+ struct device_attribute *mattr,
+ const char *data,
+ size_t len)
+{
+ struct ir_input_dev *ir_dev = dev_get_drvdata(d);
+ bool enable, disable;
+ const char *tmp;
+ u64 type;
+ u64 mask;
+ int rc, i, count = 0;
+ unsigned long flags;
+
+ /* Device is being removed */
+ if (!ir_dev)
+ return -EINVAL;
+
+ if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
+ type = ir_dev->rc_tab.ir_type;
+ else if (ir_dev->raw)
+ type = ir_dev->raw->enabled_protocols;
+ else {
+ IR_dprintk(1, "Protocol switching not supported\n");
+ return -EINVAL;
+ }
+
+ while ((tmp = strsep((char **) &data, " \n")) != NULL) {
+ if (!*tmp)
+ break;
+
+ if (*tmp == '+') {
+ enable = true;
+ disable = false;
+ tmp++;
+ } else if (*tmp == '-') {
+ enable = false;
+ disable = true;
+ tmp++;
+ } else {
+ enable = false;
+ disable = false;
+ }
+
+ if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) {
+ tmp += sizeof(PROTO_NONE);
+ mask = 0;
+ count++;
+ } else {
+ for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
+ if (!strncasecmp(tmp, proto_names[i].name, strlen(proto_names[i].name))) {
+ tmp += strlen(proto_names[i].name);
+ mask = proto_names[i].type;
+ break;
+ }
+ }
+ if (i == ARRAY_SIZE(proto_names)) {
+ IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
+ return -EINVAL;
+ }
+ count++;
+ }
+
+ if (enable)
+ type |= mask;
+ else if (disable)
+ type &= ~mask;
+ else
+ type = mask;
+ }
+
+ if (!count) {
+ IR_dprintk(1, "Protocol not specified\n");
+ return -EINVAL;
+ }
+
+ if (ir_dev->props && ir_dev->props->change_protocol) {
+ rc = ir_dev->props->change_protocol(ir_dev->props->priv,
+ type);
+ if (rc < 0) {
+ IR_dprintk(1, "Error setting protocols to 0x%llx\n",
+ (long long)type);
+ return -EINVAL;
+ }
+ }
+
+ if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+ spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
+ ir_dev->rc_tab.ir_type = type;
+ spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
+ } else {
+ ir_dev->raw->enabled_protocols = type;
+ }
+
+ IR_dprintk(1, "Current protocol(s): 0x%llx\n",
+ (long long)type);
+
+ return len;
+}
+
+#define ADD_HOTPLUG_VAR(fmt, val...) \
+ do { \
+ int err = add_uevent_var(env, fmt, val); \
+ if (err) \
+ return err; \
+ } while (0)
+
+static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
+{
+ struct ir_input_dev *ir_dev = dev_get_drvdata(device);
+
+ if (ir_dev->rc_tab.name)
+ ADD_HOTPLUG_VAR("NAME=%s", ir_dev->rc_tab.name);
+ if (ir_dev->driver_name)
+ ADD_HOTPLUG_VAR("DRV_NAME=%s", ir_dev->driver_name);
+
+ return 0;
+}
+
+/*
+ * Static device attribute struct with the sysfs attributes for IR's
+ */
+static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR,
+ show_protocols, store_protocols);
+
+static struct attribute *rc_dev_attrs[] = {
+ &dev_attr_protocols.attr,
+ NULL,
+};
+
+static struct attribute_group rc_dev_attr_grp = {
+ .attrs = rc_dev_attrs,
+};
+
+static const struct attribute_group *rc_dev_attr_groups[] = {
+ &rc_dev_attr_grp,
+ NULL
+};
+
+static struct device_type rc_dev_type = {
+ .groups = rc_dev_attr_groups,
+ .uevent = rc_dev_uevent,
+};
+
+/**
+ * ir_register_class() - creates the sysfs for /sys/class/rc/rc?
+ * @input_dev: the struct input_dev descriptor of the device
+ *
+ * This routine is used to register the syfs code for IR class
+ */
+static int ir_register_class(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ int devno = find_first_zero_bit(&ir_core_dev_number,
+ IRRCV_NUM_DEVICES);
+
+ if (unlikely(devno < 0))
+ return devno;
+
+ ir_dev->dev.type = &rc_dev_type;
+ ir_dev->devno = devno;
+
+ ir_dev->dev.class = &ir_input_class;
+ ir_dev->dev.parent = input_dev->dev.parent;
+ input_dev->dev.parent = &ir_dev->dev;
+ dev_set_name(&ir_dev->dev, "rc%d", devno);
+ dev_set_drvdata(&ir_dev->dev, ir_dev);
+ return device_register(&ir_dev->dev);
+};
+
+/**
+ * ir_register_input - registers ir input device with input subsystem
+ * @input_dev: the struct input_dev descriptor of the device
+ */
+
+static int ir_register_input(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ int rc;
+ const char *path;
+
+
+ rc = input_register_device(input_dev);
+ if (rc < 0) {
+ device_del(&ir_dev->dev);
+ return rc;
+ }
+
+ __module_get(THIS_MODULE);
+
+ path = kobject_get_path(&ir_dev->dev.kobj, GFP_KERNEL);
+ printk(KERN_INFO "%s: %s as %s\n",
+ dev_name(&ir_dev->dev),
+ input_dev->name ? input_dev->name : "Unspecified device",
+ path ? path : "N/A");
+ kfree(path);
+
+ set_bit(ir_dev->devno, &ir_core_dev_number);
+ return 0;
+}
+
+/**
+ * ir_unregister_class() - removes the sysfs for sysfs for
+ * /sys/class/rc/rc?
+ * @input_dev: the struct input_dev descriptor of the device
+ *
+ * This routine is used to unregister the syfs code for IR class
+ */
+static void ir_unregister_class(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+ input_set_drvdata(input_dev, NULL);
+ clear_bit(ir_dev->devno, &ir_core_dev_number);
+ input_unregister_device(input_dev);
+ device_del(&ir_dev->dev);
+
+ module_put(THIS_MODULE);
+}
+
+/*
+ * Init/exit code for the module. Basically, creates/removes /sys/class/rc
+ */
+
+static int __init ir_core_init(void)
+{
+ int rc = class_register(&ir_input_class);
+ if (rc) {
+ printk(KERN_ERR "ir_core: unable to register rc class\n");
+ return rc;
+ }
+
+ /* Initialize/load the decoders/keymap code that will be used */
+ ir_raw_init();
+ ir_register_map(&empty_map);
+
+ return 0;
+}
+
+static void __exit ir_core_exit(void)
+{
+ class_unregister(&ir_input_class);
+ ir_unregister_map(&empty_map);
+}
+
+module_init(ir_core_init);
+module_exit(ir_core_exit);
+
+int ir_core_debug; /* ir_debug level (0,1,2) */
+EXPORT_SYMBOL_GPL(ir_core_debug);
+module_param_named(debug, ir_core_debug, int, 0644);
+
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/media/IR/rc-map.c b/drivers/media/IR/rc-map.c
deleted file mode 100644
index 689143f..0000000
--- a/drivers/media/IR/rc-map.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/* ir-raw-event.c - handle IR Pulse/Space event
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <media/ir-core.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-
-/* Used to handle IR raw handler extensions */
-static LIST_HEAD(rc_map_list);
-static DEFINE_SPINLOCK(rc_map_lock);
-
-static struct rc_keymap *seek_rc_map(const char *name)
-{
- struct rc_keymap *map = NULL;
-
- spin_lock(&rc_map_lock);
- list_for_each_entry(map, &rc_map_list, list) {
- if (!strcmp(name, map->map.name)) {
- spin_unlock(&rc_map_lock);
- return map;
- }
- }
- spin_unlock(&rc_map_lock);
-
- return NULL;
-}
-
-struct ir_scancode_table *get_rc_map(const char *name)
-{
-
- struct rc_keymap *map;
-
- map = seek_rc_map(name);
-#ifdef MODULE
- if (!map) {
- int rc = request_module(name);
- if (rc < 0) {
- printk(KERN_ERR "Couldn't load IR keymap %s\n", name);
- return NULL;
- }
- msleep(20); /* Give some time for IR to register */
-
- map = seek_rc_map(name);
- }
-#endif
- if (!map) {
- printk(KERN_ERR "IR keymap %s not found\n", name);
- return NULL;
- }
-
- printk(KERN_INFO "Registered IR keymap %s\n", map->map.name);
-
- return &map->map;
-}
-EXPORT_SYMBOL_GPL(get_rc_map);
-
-int ir_register_map(struct rc_keymap *map)
-{
- spin_lock(&rc_map_lock);
- list_add_tail(&map->list, &rc_map_list);
- spin_unlock(&rc_map_lock);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ir_register_map);
-
-void ir_unregister_map(struct rc_keymap *map)
-{
- spin_lock(&rc_map_lock);
- list_del(&map->list);
- spin_unlock(&rc_map_lock);
-}
-EXPORT_SYMBOL_GPL(ir_unregister_map);
-
-
-static struct ir_scancode empty[] = {
- { 0x2a, KEY_COFFEE },
-};
-
-static struct rc_keymap empty_map = {
- .map = {
- .scan = empty,
- .size = ARRAY_SIZE(empty),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_EMPTY,
- }
-};
-
-int ir_rcmap_init(void)
-{
- return ir_register_map(&empty_map);
-}
-
-void ir_rcmap_cleanup(void)
-{
- ir_unregister_map(&empty_map);
-}
diff --git a/drivers/media/IR/rc-raw.c b/drivers/media/IR/rc-raw.c
new file mode 100644
index 0000000..a06a07e
--- /dev/null
+++ b/drivers/media/IR/rc-raw.c
@@ -0,0 +1,382 @@
+/* ir-raw-event.c - handle IR Pulse/Space event
+ *
+ * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/freezer.h>
+#include "ir-core-priv.h"
+
+/* Define the max number of pulse/space transitions to buffer */
+#define MAX_IR_EVENT_SIZE 512
+
+/* Used to keep track of IR raw clients, protected by ir_raw_handler_lock */
+static LIST_HEAD(ir_raw_client_list);
+
+/* Used to handle IR raw handler extensions */
+static DEFINE_MUTEX(ir_raw_handler_lock);
+static LIST_HEAD(ir_raw_handler_list);
+static u64 available_protocols;
+
+#ifdef MODULE
+/* Used to load the decoders */
+static struct work_struct wq_load;
+#endif
+
+static int ir_raw_event_thread(void *data)
+{
+ struct ir_raw_event ev;
+ struct ir_raw_handler *handler;
+ struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data;
+ int retval;
+
+ while (!kthread_should_stop()) {
+
+ spin_lock_irq(&raw->lock);
+ retval = kfifo_out(&raw->kfifo, &ev, sizeof(ev));
+
+ if (!retval) {
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ if (kthread_should_stop())
+ set_current_state(TASK_RUNNING);
+
+ spin_unlock_irq(&raw->lock);
+ schedule();
+ continue;
+ }
+
+ spin_unlock_irq(&raw->lock);
+
+
+ BUG_ON(retval != sizeof(ev));
+
+ mutex_lock(&ir_raw_handler_lock);
+ list_for_each_entry(handler, &ir_raw_handler_list, list)
+ handler->decode(raw->input_dev, ev);
+ raw->prev_ev = ev;
+ mutex_unlock(&ir_raw_handler_lock);
+ }
+
+ return 0;
+}
+
+/**
+ * ir_raw_event_store() - pass a pulse/space duration to the raw ir decoders
+ * @input_dev: the struct input_dev device descriptor
+ * @ev: the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This routine (which may be called from an interrupt context) stores a
+ * pulse/space duration for the raw ir decoding state machines. Pulses are
+ * signalled as positive values and spaces as negative values. A zero value
+ * will reset the decoding state machines.
+ */
+int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+
+ if (!ir->raw)
+ return -EINVAL;
+
+ IR_dprintk(2, "sample: (%05dus %s)\n",
+ TO_US(ev->duration), TO_STR(ev->pulse));
+
+ if (kfifo_in(&ir->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
+ return -ENOMEM;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store);
+
+/**
+ * ir_raw_event_store_edge() - notify raw ir decoders of the start of a pulse/space
+ * @input_dev: the struct input_dev device descriptor
+ * @type: the type of the event that has occurred
+ *
+ * This routine (which may be called from an interrupt context) is used to
+ * store the beginning of an ir pulse or space (or the start/end of ir
+ * reception) for the raw ir decoding state machines. This is used by
+ * hardware which does not provide durations directly but only interrupts
+ * (or similar events) on state change.
+ */
+int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ ktime_t now;
+ s64 delta; /* ns */
+ struct ir_raw_event ev;
+ int rc = 0;
+
+ if (!ir->raw)
+ return -EINVAL;
+
+ now = ktime_get();
+ delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
+
+ /* Check for a long duration since last event or if we're
+ * being called for the first time, note that delta can't
+ * possibly be negative.
+ */
+ ev.duration = 0;
+ if (delta > IR_MAX_DURATION || !ir->raw->last_type)
+ type |= IR_START_EVENT;
+ else
+ ev.duration = delta;
+
+ if (type & IR_START_EVENT)
+ ir_raw_event_reset(input_dev);
+ else if (ir->raw->last_type & IR_SPACE) {
+ ev.pulse = false;
+ rc = ir_raw_event_store(input_dev, &ev);
+ } else if (ir->raw->last_type & IR_PULSE) {
+ ev.pulse = true;
+ rc = ir_raw_event_store(input_dev, &ev);
+ } else
+ return 0;
+
+ ir->raw->last_event = now;
+ ir->raw->last_type = type;
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
+
+/**
+ * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
+ * @input_dev: the struct input_dev device descriptor
+ * @type: the type of the event that has occurred
+ *
+ * This routine (which may be called from an interrupt context) works
+ * in similiar manner to ir_raw_event_store_edge.
+ * This routine is intended for devices with limited internal buffer
+ * It automerges samples of same type, and handles timeouts
+ */
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+ struct ir_raw_event *ev)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ struct ir_raw_event_ctrl *raw = ir->raw;
+
+ if (!raw || !ir->props)
+ return -EINVAL;
+
+ /* Ignore spaces in idle mode */
+ if (ir->idle && !ev->pulse)
+ return 0;
+ else if (ir->idle)
+ ir_raw_event_set_idle(input_dev, false);
+
+ if (!raw->this_ev.duration) {
+ raw->this_ev = *ev;
+ } else if (ev->pulse == raw->this_ev.pulse) {
+ raw->this_ev.duration += ev->duration;
+ } else {
+ ir_raw_event_store(input_dev, &raw->this_ev);
+ raw->this_ev = *ev;
+ }
+
+ /* Enter idle mode if nessesary */
+ if (!ev->pulse && ir->props->timeout &&
+ raw->this_ev.duration >= ir->props->timeout) {
+ ir_raw_event_set_idle(input_dev, true);
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
+
+/**
+ * ir_raw_event_set_idle() - hint the ir core if device is receiving
+ * IR data or not
+ * @input_dev: the struct input_dev device descriptor
+ * @idle: the hint value
+ */
+void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ struct ir_raw_event_ctrl *raw = ir->raw;
+
+ if (!ir->props || !ir->raw)
+ return;
+
+ IR_dprintk(2, "%s idle mode\n", idle ? "enter" : "leave");
+
+ if (idle) {
+ raw->this_ev.timeout = true;
+ ir_raw_event_store(input_dev, &raw->this_ev);
+ init_ir_raw_event(&raw->this_ev);
+ }
+
+ if (ir->props->s_idle)
+ ir->props->s_idle(ir->props->priv, idle);
+ ir->idle = idle;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
+
+/**
+ * ir_raw_event_handle() - schedules the decoding of stored ir data
+ * @input_dev: the struct input_dev device descriptor
+ *
+ * This routine will signal the workqueue to start decoding stored ir data.
+ */
+void ir_raw_event_handle(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ unsigned long flags;
+
+ if (!ir->raw)
+ return;
+
+ spin_lock_irqsave(&ir->raw->lock, flags);
+ wake_up_process(ir->raw->thread);
+ spin_unlock_irqrestore(&ir->raw->lock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_handle);
+
+/* used internally by the sysfs interface */
+u64
+ir_raw_get_allowed_protocols()
+{
+ u64 protocols;
+ mutex_lock(&ir_raw_handler_lock);
+ protocols = available_protocols;
+ mutex_unlock(&ir_raw_handler_lock);
+ return protocols;
+}
+
+/*
+ * Used to (un)register raw event clients
+ */
+int ir_raw_event_register(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ int rc;
+ struct ir_raw_handler *handler;
+
+ ir->raw = kzalloc(sizeof(*ir->raw), GFP_KERNEL);
+ if (!ir->raw)
+ return -ENOMEM;
+
+ ir->raw->input_dev = input_dev;
+
+ ir->raw->enabled_protocols = ~0;
+ rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE,
+ GFP_KERNEL);
+ if (rc < 0) {
+ kfree(ir->raw);
+ ir->raw = NULL;
+ return rc;
+ }
+
+ spin_lock_init(&ir->raw->lock);
+ ir->raw->thread = kthread_run(ir_raw_event_thread, ir->raw,
+ "rc%u", (unsigned int)ir->devno);
+
+ if (IS_ERR(ir->raw->thread)) {
+ int ret = PTR_ERR(ir->raw->thread);
+
+ kfree(ir->raw);
+ ir->raw = NULL;
+ return ret;
+ }
+
+ mutex_lock(&ir_raw_handler_lock);
+ list_add_tail(&ir->raw->list, &ir_raw_client_list);
+ list_for_each_entry(handler, &ir_raw_handler_list, list)
+ if (handler->raw_register)
+ handler->raw_register(ir->raw->input_dev);
+ mutex_unlock(&ir_raw_handler_lock);
+
+ return 0;
+}
+
+void ir_raw_event_unregister(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ struct ir_raw_handler *handler;
+
+ if (!ir->raw)
+ return;
+
+ kthread_stop(ir->raw->thread);
+
+ mutex_lock(&ir_raw_handler_lock);
+ list_del(&ir->raw->list);
+ list_for_each_entry(handler, &ir_raw_handler_list, list)
+ if (handler->raw_unregister)
+ handler->raw_unregister(ir->raw->input_dev);
+ mutex_unlock(&ir_raw_handler_lock);
+
+ kfifo_free(&ir->raw->kfifo);
+ kfree(ir->raw);
+ ir->raw = NULL;
+}
+
+/*
+ * Extension interface - used to register the IR decoders
+ */
+
+int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler)
+{
+ struct ir_raw_event_ctrl *raw;
+
+ mutex_lock(&ir_raw_handler_lock);
+ list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
+ if (ir_raw_handler->raw_register)
+ list_for_each_entry(raw, &ir_raw_client_list, list)
+ ir_raw_handler->raw_register(raw->input_dev);
+ available_protocols |= ir_raw_handler->protocols;
+ mutex_unlock(&ir_raw_handler_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(ir_raw_handler_register);
+
+void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler)
+{
+ struct ir_raw_event_ctrl *raw;
+
+ mutex_lock(&ir_raw_handler_lock);
+ list_del(&ir_raw_handler->list);
+ if (ir_raw_handler->raw_unregister)
+ list_for_each_entry(raw, &ir_raw_client_list, list)
+ ir_raw_handler->raw_unregister(raw->input_dev);
+ available_protocols &= ~ir_raw_handler->protocols;
+ mutex_unlock(&ir_raw_handler_lock);
+}
+EXPORT_SYMBOL(ir_raw_handler_unregister);
+
+#ifdef MODULE
+static void init_decoders(struct work_struct *work)
+{
+ /* Load the decoder modules */
+
+ load_nec_decode();
+ load_rc5_decode();
+ load_rc6_decode();
+ load_jvc_decode();
+ load_sony_decode();
+ load_lirc_codec();
+
+ /* If needed, we may later add some init code. In this case,
+ it is needed to change the CONFIG_MODULE test at ir-core.h
+ */
+}
+#endif
+
+void ir_raw_init(void)
+{
+#ifdef MODULE
+ INIT_WORK(&wq_load, init_decoders);
+ schedule_work(&wq_load);
+#endif
+}
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
index 53048a2..d41502d 100644
--- a/include/media/ir-core.h
+++ b/include/media/ir-core.h
@@ -117,7 +117,6 @@ enum raw_event_type {
#define to_ir_input_dev(_attr) container_of(_attr, struct ir_input_dev, attr)
-/* From ir-keytable.c */
int __ir_input_register(struct input_dev *dev,
const struct ir_scancode_table *ir_codes,
struct ir_dev_props *props,
@@ -164,7 +163,6 @@ void ir_keyup(struct input_dev *dev);
u32 ir_g_keycode_from_table(struct input_dev *input_dev, u32 scancode);
/* From ir-raw-event.c */
-
struct ir_raw_event {
union {
u32 duration;
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH 5/7] ir-core: merge and rename to rc-core
2010-10-29 19:08 ` [PATCH 5/7] ir-core: merge and rename to rc-core David Härdeman
@ 2010-11-02 16:01 ` Jarod Wilson
0 siblings, 0 replies; 18+ messages in thread
From: Jarod Wilson @ 2010-11-02 16:01 UTC (permalink / raw)
To: David Härdeman; +Cc: linux-media, mchehab
On Fri, Oct 29, 2010 at 3:08 PM, David Härdeman <david@hardeman.nu> wrote:
> This patch merges the files which makes up ir-core and renames the
> resulting module to rc-core. ir-raw-event.c is still kept as a separate
> file (but renamed to rc-raw.c) as suggested by Mauro.
>
> Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Jarod Wilson <jarod@redhat.com>
This also gets a...
Tested-by: Jarod Wilson <jarod@redhat.com>
...as I've tested the merged core w/mceusb, streamzap, imon and nuvoton-cir.
--
Jarod Wilson
jarod@wilsonet.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 6/7] ir-core: make struct rc_dev the primary interface
2010-10-29 19:07 [PATCH 0/7] rc-core: ir-core to rc-core conversion David Härdeman
` (4 preceding siblings ...)
2010-10-29 19:08 ` [PATCH 5/7] ir-core: merge and rename to rc-core David Härdeman
@ 2010-10-29 19:08 ` David Härdeman
2010-11-02 16:02 ` Jarod Wilson
2010-11-10 4:31 ` Mauro Carvalho Chehab
2010-10-29 19:08 ` [PATCH 7/7] rc-core: convert winbond-cir David Härdeman
` (2 subsequent siblings)
8 siblings, 2 replies; 18+ messages in thread
From: David Härdeman @ 2010-10-29 19:08 UTC (permalink / raw)
To: linux-media; +Cc: jarod, mchehab
This patch merges the ir_input_dev and ir_dev_props structs into a single
struct called rc_dev. The drivers and various functions in rc-core used
by the drivers are also changed to use rc_dev as the primary interface
when dealing with rc-core.
This means that the input_dev is abstracted away from the drivers which
is necessary if we ever want to support multiple input devs per rc device.
The new API is similar to what the input subsystem uses, i.e:
rc_device_alloc()
rc_device_free()
rc_device_register()
rc_device_unregister()
Signed-off-by: David Härdeman <david@hardeman.nu>
---
drivers/media/IR/ene_ir.c | 129 +++---
drivers/media/IR/ene_ir.h | 3
drivers/media/IR/imon.c | 58 +--
drivers/media/IR/ir-core-priv.h | 16 -
drivers/media/IR/ir-jvc-decoder.c | 13 -
drivers/media/IR/ir-lirc-codec.c | 121 ++---
drivers/media/IR/ir-nec-decoder.c | 15 -
drivers/media/IR/ir-rc5-decoder.c | 13 -
drivers/media/IR/ir-rc5-sz-decoder.c | 13 -
drivers/media/IR/ir-rc6-decoder.c | 17 -
drivers/media/IR/ir-sony-decoder.c | 11
drivers/media/IR/mceusb.c | 105 ++---
drivers/media/IR/nuvoton-cir.c | 85 ++--
drivers/media/IR/nuvoton-cir.h | 3
drivers/media/IR/rc-main.c | 612 ++++++++++++---------------
drivers/media/IR/rc-raw.c | 191 ++++----
drivers/media/IR/streamzap.c | 66 +--
drivers/media/dvb/dm1105/dm1105.c | 42 +-
drivers/media/dvb/dvb-usb/af9015.c | 16 -
drivers/media/dvb/dvb-usb/anysee.c | 2
drivers/media/dvb/dvb-usb/dib0700.h | 2
drivers/media/dvb/dvb-usb/dib0700_core.c | 8
drivers/media/dvb/dvb-usb/dib0700_devices.c | 144 +++---
drivers/media/dvb/dvb-usb/dvb-usb-remote.c | 77 ++-
drivers/media/dvb/dvb-usb/dvb-usb.h | 12 -
drivers/media/dvb/dvb-usb/lmedm04.c | 42 +-
drivers/media/dvb/mantis/mantis_common.h | 4
drivers/media/dvb/mantis/mantis_input.c | 72 ++-
drivers/media/dvb/siano/smscoreapi.c | 2
drivers/media/dvb/siano/smsir.c | 52 +-
drivers/media/dvb/siano/smsir.h | 3
drivers/media/dvb/ttpci/budget-ci.c | 49 +-
drivers/media/video/bt8xx/bttv-input.c | 41 +-
drivers/media/video/cx23885/cx23885-input.c | 64 +--
drivers/media/video/cx23885/cx23885.h | 3
drivers/media/video/cx88/cx88-input.c | 96 ++--
drivers/media/video/em28xx/em28xx-input.c | 72 +--
drivers/media/video/ir-kbd-i2c.c | 25 +
drivers/media/video/saa7134/saa7134-input.c | 72 +--
drivers/staging/tm6000/tm6000-input.c | 85 ++--
include/media/ir-common.h | 3
include/media/ir-core.h | 181 ++++----
include/media/ir-kbd-i2c.h | 3
43 files changed, 1213 insertions(+), 1430 deletions(-)
diff --git a/drivers/media/IR/ene_ir.c b/drivers/media/IR/ene_ir.c
index 7637bab..0a4151f 100644
--- a/drivers/media/IR/ene_ir.c
+++ b/drivers/media/IR/ene_ir.c
@@ -37,9 +37,7 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/input.h>
#include <media/ir-core.h>
-#include <media/ir-common.h>
#include "ene_ir.h"
static int sample_period;
@@ -357,7 +355,7 @@ void ene_rx_sense_carrier(struct ene_device *dev)
ev.carrier_report = true;
ev.carrier = carrier;
ev.duty_cycle = duty_cycle;
- ir_raw_event_store(dev->idev, &ev);
+ ir_raw_event_store(dev->rdev, &ev);
}
}
@@ -448,32 +446,32 @@ static void ene_rx_setup(struct ene_device *dev)
select_timeout:
if (dev->rx_fan_input_inuse) {
- dev->props->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
+ dev->rdev->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
/* Fan input doesn't support timeouts, it just ends the
input with a maximum sample */
- dev->props->min_timeout = dev->props->max_timeout =
+ dev->rdev->min_timeout = dev->rdev->max_timeout =
MS_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK *
ENE_FW_SAMPLE_PERIOD_FAN);
} else {
- dev->props->rx_resolution = MS_TO_NS(sample_period);
+ dev->rdev->rx_resolution = MS_TO_NS(sample_period);
/* Theoreticly timeout is unlimited, but we cap it
* because it was seen that on one device, it
* would stop sending spaces after around 250 msec.
* Besides, this is close to 2^32 anyway and timeout is u32.
*/
- dev->props->min_timeout = MS_TO_NS(127 * sample_period);
- dev->props->max_timeout = MS_TO_NS(200000);
+ dev->rdev->min_timeout = MS_TO_NS(127 * sample_period);
+ dev->rdev->max_timeout = MS_TO_NS(200000);
}
if (dev->hw_learning_and_tx_capable)
- dev->props->tx_resolution = MS_TO_NS(sample_period);
+ dev->rdev->tx_resolution = MS_TO_NS(sample_period);
- if (dev->props->timeout > dev->props->max_timeout)
- dev->props->timeout = dev->props->max_timeout;
- if (dev->props->timeout < dev->props->min_timeout)
- dev->props->timeout = dev->props->min_timeout;
+ if (dev->rdev->timeout > dev->rdev->max_timeout)
+ dev->rdev->timeout = dev->rdev->max_timeout;
+ if (dev->rdev->timeout < dev->rdev->min_timeout)
+ dev->rdev->timeout = dev->rdev->min_timeout;
}
/* Enable the device for receive */
@@ -504,7 +502,7 @@ static void ene_rx_enable(struct ene_device *dev)
ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ);
/* enter idle mode */
- ir_raw_event_set_idle(dev->idev, true);
+ ir_raw_event_set_idle(dev->rdev, true);
dev->rx_enabled = true;
}
@@ -518,7 +516,7 @@ static void ene_rx_disable(struct ene_device *dev)
/* disable hardware IRQ and firmware flag */
ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ);
- ir_raw_event_set_idle(dev->idev, true);
+ ir_raw_event_set_idle(dev->rdev, true);
dev->rx_enabled = false;
}
@@ -805,10 +803,10 @@ static irqreturn_t ene_isr(int irq, void *data)
ev.duration = MS_TO_NS(hw_sample);
ev.pulse = pulse;
- ir_raw_event_store_with_filter(dev->idev, &ev);
+ ir_raw_event_store_with_filter(dev->rdev, &ev);
}
- ir_raw_event_handle(dev->idev);
+ ir_raw_event_handle(dev->rdev);
unlock:
spin_unlock_irqrestore(&dev->hw_lock, flags);
return retval;
@@ -823,7 +821,7 @@ static void ene_setup_default_settings(struct ene_device *dev)
dev->learning_mode_enabled = learning_mode_force;
/* Set reasonable default timeout */
- dev->props->timeout = MS_TO_NS(150000);
+ dev->rdev->timeout = MS_TO_NS(150000);
}
/* Upload all hardware settings at once. Used at load and resume time */
@@ -838,9 +836,9 @@ static void ene_setup_hw_settings(struct ene_device *dev)
}
/* outside interface: called on first open*/
-static int ene_open(void *data)
+static int ene_open(struct rc_dev *rdev)
{
- struct ene_device *dev = (struct ene_device *)data;
+ struct ene_device *dev = rdev->priv;
unsigned long flags;
spin_lock_irqsave(&dev->hw_lock, flags);
@@ -850,9 +848,9 @@ static int ene_open(void *data)
}
/* outside interface: called on device close*/
-static void ene_close(void *data)
+static void ene_close(struct rc_dev *rdev)
{
- struct ene_device *dev = (struct ene_device *)data;
+ struct ene_device *dev = rdev->priv;
unsigned long flags;
spin_lock_irqsave(&dev->hw_lock, flags);
@@ -861,9 +859,9 @@ static void ene_close(void *data)
}
/* outside interface: set transmitter mask */
-static int ene_set_tx_mask(void *data, u32 tx_mask)
+static int ene_set_tx_mask(struct rc_dev *rdev, u32 tx_mask)
{
- struct ene_device *dev = (struct ene_device *)data;
+ struct ene_device *dev = rdev->priv;
dbg("TX: attempt to set transmitter mask %02x", tx_mask);
/* invalid txmask */
@@ -879,9 +877,9 @@ static int ene_set_tx_mask(void *data, u32 tx_mask)
}
/* outside interface : set tx carrier */
-static int ene_set_tx_carrier(void *data, u32 carrier)
+static int ene_set_tx_carrier(struct rc_dev *rdev, u32 carrier)
{
- struct ene_device *dev = (struct ene_device *)data;
+ struct ene_device *dev = rdev->priv;
u32 period = 2000000 / carrier;
dbg("TX: attempt to set tx carrier to %d kHz", carrier);
@@ -900,9 +898,9 @@ static int ene_set_tx_carrier(void *data, u32 carrier)
}
/*outside interface : set tx duty cycle */
-static int ene_set_tx_duty_cycle(void *data, u32 duty_cycle)
+static int ene_set_tx_duty_cycle(struct rc_dev *rdev, u32 duty_cycle)
{
- struct ene_device *dev = (struct ene_device *)data;
+ struct ene_device *dev = rdev->priv;
dbg("TX: setting duty cycle to %d%%", duty_cycle);
dev->tx_duty_cycle = duty_cycle;
ene_tx_set_carrier(dev);
@@ -910,9 +908,9 @@ static int ene_set_tx_duty_cycle(void *data, u32 duty_cycle)
}
/* outside interface: enable learning mode */
-static int ene_set_learning_mode(void *data, int enable)
+static int ene_set_learning_mode(struct rc_dev *rdev, int enable)
{
- struct ene_device *dev = (struct ene_device *)data;
+ struct ene_device *dev = rdev->priv;
unsigned long flags;
if (enable == dev->learning_mode_enabled)
return 0;
@@ -926,9 +924,9 @@ static int ene_set_learning_mode(void *data, int enable)
return 0;
}
-static int ene_set_carrier_report(void *data, int enable)
+static int ene_set_carrier_report(struct rc_dev *rdev, int enable)
{
- struct ene_device *dev = (struct ene_device *)data;
+ struct ene_device *dev = rdev->priv;
unsigned long flags;
if (enable == dev->carrier_detect_enabled)
@@ -944,18 +942,20 @@ static int ene_set_carrier_report(void *data, int enable)
}
/* outside interface: enable or disable idle mode */
-static void ene_set_idle(void *data, bool idle)
+static void ene_set_idle(struct rc_dev *rdev, bool idle)
{
+ struct ene_device *dev = rdev->priv;
+
if (idle) {
- ene_rx_reset((struct ene_device *)data);
+ ene_rx_reset(dev);
dbg("RX: end of data");
}
}
/* outside interface: transmit */
-static int ene_transmit(void *data, int *buf, u32 n)
+static int ene_transmit(struct rc_dev *rdev, int *buf, u32 n)
{
- struct ene_device *dev = (struct ene_device *)data;
+ struct ene_device *dev = rdev->priv;
unsigned long flags;
dev->tx_buffer = buf;
@@ -992,16 +992,13 @@ static int ene_transmit(void *data, int *buf, u32 n)
static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
{
int error = -ENOMEM;
- struct ir_dev_props *ir_props;
- struct input_dev *input_dev;
+ struct rc_dev *rdev;
struct ene_device *dev;
/* allocate memory */
- input_dev = input_allocate_device();
- ir_props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
-
- if (!input_dev || !ir_props || !dev)
+ rdev = rc_allocate_device();
+ if (!dev || !rdev)
goto error1;
/* validate resources */
@@ -1054,24 +1051,25 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
if (!dev->hw_learning_and_tx_capable)
learning_mode_force = false;
- ir_props->driver_type = RC_DRIVER_IR_RAW;
- ir_props->allowed_protos = IR_TYPE_ALL;
- ir_props->priv = dev;
- ir_props->open = ene_open;
- ir_props->close = ene_close;
- ir_props->s_idle = ene_set_idle;
-
- dev->props = ir_props;
- dev->idev = input_dev;
+ rdev->driver_type = RC_DRIVER_IR_RAW;
+ rdev->allowed_protos = IR_TYPE_ALL;
+ rdev->priv = dev;
+ rdev->open = ene_open;
+ rdev->close = ene_close;
+ rdev->s_idle = ene_set_idle;
+ rdev->driver_name = ENE_DRIVER_NAME;
+ rdev->map_name = RC_MAP_RC6_MCE;
+ rdev->input_name = "ENE eHome Infrared Remote Receiver";
if (dev->hw_learning_and_tx_capable) {
- ir_props->s_learning_mode = ene_set_learning_mode;
+ rdev->s_learning_mode = ene_set_learning_mode;
init_completion(&dev->tx_complete);
- ir_props->tx_ir = ene_transmit;
- ir_props->s_tx_mask = ene_set_tx_mask;
- ir_props->s_tx_carrier = ene_set_tx_carrier;
- ir_props->s_tx_duty_cycle = ene_set_tx_duty_cycle;
- ir_props->s_carrier_report = ene_set_carrier_report;
+ rdev->tx_ir = ene_transmit;
+ rdev->s_tx_mask = ene_set_tx_mask;
+ rdev->s_tx_carrier = ene_set_tx_carrier;
+ rdev->s_tx_duty_cycle = ene_set_tx_duty_cycle;
+ rdev->s_carrier_report = ene_set_carrier_report;
+ rdev->input_name = "ENE eHome Infrared Remote Transceiver";
}
ene_rx_setup_hw_buffer(dev);
@@ -1081,16 +1079,11 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
device_set_wakeup_capable(&pnp_dev->dev, true);
device_set_wakeup_enable(&pnp_dev->dev, true);
- if (dev->hw_learning_and_tx_capable)
- input_dev->name = "ENE eHome Infrared Remote Transceiver";
- else
- input_dev->name = "ENE eHome Infrared Remote Receiver";
-
- error = -ENODEV;
- if (ir_input_register(input_dev, RC_MAP_RC6_MCE, ir_props,
- ENE_DRIVER_NAME))
+ error = rc_register_device(rdev);
+ if (error < 0)
goto error;
+ dev->rdev = rdev;
ene_notice("driver has been succesfully loaded");
return 0;
error:
@@ -1099,8 +1092,7 @@ error:
if (dev && dev->hw_io >= 0)
release_region(dev->hw_io, ENE_IO_SIZE);
error1:
- input_free_device(input_dev);
- kfree(ir_props);
+ rc_free_device(rdev);
kfree(dev);
return error;
}
@@ -1118,8 +1110,7 @@ static void ene_remove(struct pnp_dev *pnp_dev)
free_irq(dev->irq, dev);
release_region(dev->hw_io, ENE_IO_SIZE);
- ir_input_unregister(dev->idev);
- kfree(dev->props);
+ rc_unregister_device(dev->rdev);
kfree(dev);
}
diff --git a/drivers/media/IR/ene_ir.h b/drivers/media/IR/ene_ir.h
index f587066..c179baf 100644
--- a/drivers/media/IR/ene_ir.h
+++ b/drivers/media/IR/ene_ir.h
@@ -205,8 +205,7 @@
struct ene_device {
struct pnp_dev *pnp_dev;
- struct input_dev *idev;
- struct ir_dev_props *props;
+ struct rc_dev *rdev;
/* hw IO settings */
long hw_io;
diff --git a/drivers/media/IR/imon.c b/drivers/media/IR/imon.c
index 68699d4..19fc460 100644
--- a/drivers/media/IR/imon.c
+++ b/drivers/media/IR/imon.c
@@ -88,7 +88,6 @@ static ssize_t lcd_write(struct file *file, const char *buf,
struct imon_context {
struct device *dev;
- struct ir_dev_props *props;
/* Newer devices have two interfaces */
struct usb_device *usbdev_intf0;
struct usb_device *usbdev_intf1;
@@ -123,7 +122,7 @@ struct imon_context {
u16 vendor; /* usb vendor ID */
u16 product; /* usb product ID */
- struct input_dev *rdev; /* input device for remote */
+ struct rc_dev *rdev; /* rc-core device for remote */
struct input_dev *idev; /* input device for panel & IR mouse */
struct input_dev *touch; /* input device for touchscreen */
@@ -982,16 +981,16 @@ static void imon_touch_display_timeout(unsigned long data)
* really just RC-6), but only one or the other at a time, as the signals
* are decoded onboard the receiver.
*/
-int imon_ir_change_protocol(void *priv, u64 ir_type)
+static int imon_ir_change_protocol(struct rc_dev *rc, u64 ir_type)
{
int retval;
- struct imon_context *ictx = priv;
+ struct imon_context *ictx = rc->priv;
struct device *dev = ictx->dev;
bool pad_mouse;
unsigned char ir_proto_packet[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
- if (ir_type && !(ir_type & ictx->props->allowed_protos))
+ if (ir_type && !(ir_type & rc->allowed_protos))
dev_warn(dev, "Looks like you're trying to use an IR protocol "
"this device does not support\n");
@@ -1755,7 +1754,7 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
printk(KERN_CONT " (id 0x%02x)\n", ffdc_cfg_byte);
ictx->display_type = detected_display_type;
- ictx->props->allowed_protos = allowed_protos;
+ ictx->rdev->allowed_protos = allowed_protos;
ictx->ir_type = allowed_protos;
}
@@ -1809,18 +1808,15 @@ static void imon_set_display_type(struct imon_context *ictx)
ictx->display_type = configured_display_type;
}
-static struct input_dev *imon_init_rdev(struct imon_context *ictx)
+static struct rc_dev *imon_init_rdev(struct imon_context *ictx)
{
- struct input_dev *rdev;
- struct ir_dev_props *props;
+ struct rc_dev *rdev;
int ret;
- char *ir_codes = NULL;
const unsigned char fp_packet[] = { 0x40, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x88 };
- rdev = input_allocate_device();
- props = kzalloc(sizeof(*props), GFP_KERNEL);
- if (!rdev || !props) {
+ rdev = rc_allocate_device();
+ if (!rdev) {
dev_err(ictx->dev, "remote control dev allocation failed\n");
goto out;
}
@@ -1831,18 +1827,20 @@ static struct input_dev *imon_init_rdev(struct imon_context *ictx)
sizeof(ictx->phys_rdev));
strlcat(ictx->phys_rdev, "/input0", sizeof(ictx->phys_rdev));
- rdev->name = ictx->name_rdev;
- rdev->phys = ictx->phys_rdev;
- usb_to_input_id(ictx->usbdev_intf0, &rdev->id);
+ rdev->input_name = ictx->name_rdev;
+ rdev->input_phys = ictx->phys_rdev;
+ usb_to_input_id(ictx->usbdev_intf0, &rdev->input_id);
rdev->dev.parent = ictx->dev;
- rdev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
- input_set_drvdata(rdev, ictx);
- props->priv = ictx;
- props->driver_type = RC_DRIVER_SCANCODE;
- props->allowed_protos = IR_TYPE_OTHER | IR_TYPE_RC6; /* iMON PAD or MCE */
- props->change_protocol = imon_ir_change_protocol;
- ictx->props = props;
+ rdev->priv = ictx;
+ rdev->driver_type = RC_DRIVER_SCANCODE;
+ rdev->allowed_protos = IR_TYPE_OTHER | IR_TYPE_RC6; /* iMON PAD or MCE */
+ rdev->change_protocol = imon_ir_change_protocol;
+ rdev->driver_name = MOD_NAME;
+ if (ictx->ir_type == IR_TYPE_RC6)
+ rdev->map_name = RC_MAP_IMON_MCE;
+ else
+ rdev->map_name = RC_MAP_IMON_PAD;
/* Enable front-panel buttons and/or knobs */
memcpy(ictx->usb_tx_buf, &fp_packet, sizeof(fp_packet));
@@ -1856,12 +1854,7 @@ static struct input_dev *imon_init_rdev(struct imon_context *ictx)
imon_set_display_type(ictx);
- if (ictx->ir_type == IR_TYPE_RC6)
- ir_codes = RC_MAP_IMON_MCE;
- else
- ir_codes = RC_MAP_IMON_PAD;
-
- ret = ir_input_register(rdev, ir_codes, props, MOD_NAME);
+ ret = rc_register_device(rdev);
if (ret < 0) {
dev_err(ictx->dev, "remote input dev register failed\n");
goto out;
@@ -1870,8 +1863,7 @@ static struct input_dev *imon_init_rdev(struct imon_context *ictx)
return rdev;
out:
- kfree(props);
- input_free_device(rdev);
+ rc_free_device(rdev);
return NULL;
}
@@ -2142,7 +2134,7 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf)
return ictx;
urb_submit_failed:
- ir_input_unregister(ictx->rdev);
+ rc_unregister_device(ictx->rdev);
rdev_setup_failed:
input_unregister_device(ictx->idev);
idev_setup_failed:
@@ -2369,7 +2361,7 @@ static void __devexit imon_disconnect(struct usb_interface *interface)
ictx->dev_present_intf0 = false;
usb_kill_urb(ictx->rx_urb_intf0);
input_unregister_device(ictx->idev);
- ir_input_unregister(ictx->rdev);
+ rc_unregister_device(ictx->rdev);
if (ictx->display_supported) {
if (ictx->display_type == IMON_DISPLAY_TYPE_LCD)
usb_deregister_dev(interface, &imon_lcd_class);
diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index 4be0757..3616c32 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -24,11 +24,11 @@ struct ir_raw_handler {
struct list_head list;
u64 protocols; /* which are handled by this handler */
- int (*decode)(struct input_dev *input_dev, struct ir_raw_event event);
+ int (*decode)(struct rc_dev *dev, struct ir_raw_event event);
/* These two should only be used by the lirc decoder */
- int (*raw_register)(struct input_dev *input_dev);
- int (*raw_unregister)(struct input_dev *input_dev);
+ int (*raw_register)(struct rc_dev *dev);
+ int (*raw_unregister)(struct rc_dev *dev);
};
struct ir_raw_event_ctrl {
@@ -38,7 +38,7 @@ struct ir_raw_event_ctrl {
struct kfifo kfifo; /* fifo for the pulse/space durations */
ktime_t last_event; /* when last event occurred */
enum raw_event_type last_type; /* last event type */
- struct input_dev *input_dev; /* pointer to the parent input_dev */
+ struct rc_dev *dev; /* pointer to the parent rc_dev */
u64 enabled_protocols; /* enabled raw protocol decoders */
/* raw decoder state follows */
@@ -85,7 +85,7 @@ struct ir_raw_event_ctrl {
unsigned wanted_bits;
} rc5_sz;
struct lirc_codec {
- struct ir_input_dev *ir_dev;
+ struct rc_dev *dev;
struct lirc_driver *drv;
int carrier_low;
@@ -131,11 +131,11 @@ static inline bool is_timing_event(struct ir_raw_event ev)
#define TO_STR(is_pulse) ((is_pulse) ? "pulse" : "space")
/*
- * Routines from ir-raw-event.c to be used internally and by decoders
+ * Routines from rc-raw.c to be used internally and by decoders
*/
u64 ir_raw_get_allowed_protocols(void);
-int ir_raw_event_register(struct input_dev *input_dev);
-void ir_raw_event_unregister(struct input_dev *input_dev);
+int ir_raw_event_register(struct rc_dev *dev);
+void ir_raw_event_unregister(struct rc_dev *dev);
int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler);
void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler);
void ir_raw_init(void);
diff --git a/drivers/media/IR/ir-jvc-decoder.c b/drivers/media/IR/ir-jvc-decoder.c
index 63dca6e..5d4bc32 100644
--- a/drivers/media/IR/ir-jvc-decoder.c
+++ b/drivers/media/IR/ir-jvc-decoder.c
@@ -37,17 +37,16 @@ enum jvc_state {
/**
* ir_jvc_decode() - Decode one JVC pulse or space
- * @input_dev: the struct input_dev descriptor of the device
+ * @dev: the struct rc_dev descriptor of the device
* @duration: the struct ir_raw_event descriptor of the pulse/space
*
* This function returns -EINVAL if the pulse violates the state machine
*/
-static int ir_jvc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_jvc_decode(struct rc_dev *dev, struct ir_raw_event ev)
{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- struct jvc_dec *data = &ir_dev->raw->jvc;
+ struct jvc_dec *data = &dev->raw->jvc;
- if (!(ir_dev->raw->enabled_protocols & IR_TYPE_JVC))
+ if (!(dev->raw->enabled_protocols & IR_TYPE_JVC))
return 0;
if (!is_timing_event(ev)) {
@@ -140,12 +139,12 @@ again:
scancode = (bitrev8((data->bits >> 8) & 0xff) << 8) |
(bitrev8((data->bits >> 0) & 0xff) << 0);
IR_dprintk(1, "JVC scancode 0x%04x\n", scancode);
- ir_keydown(input_dev, scancode, data->toggle);
+ ir_keydown(dev, scancode, data->toggle);
data->first = false;
data->old_bits = data->bits;
} else if (data->bits == data->old_bits) {
IR_dprintk(1, "JVC repeat\n");
- ir_repeat(input_dev);
+ ir_repeat(dev);
} else {
IR_dprintk(1, "JVC invalid repeat msg\n");
break;
diff --git a/drivers/media/IR/ir-lirc-codec.c b/drivers/media/IR/ir-lirc-codec.c
index 1d9c6b0..0409fd8 100644
--- a/drivers/media/IR/ir-lirc-codec.c
+++ b/drivers/media/IR/ir-lirc-codec.c
@@ -24,21 +24,20 @@
/**
* ir_lirc_decode() - Send raw IR data to lirc_dev to be relayed to the
* lircd userspace daemon for decoding.
- * @input_dev: the struct input_dev descriptor of the device
+ * @input_dev: the struct rc_dev descriptor of the device
* @duration: the struct ir_raw_event descriptor of the pulse/space
*
* This function returns -EINVAL if the lirc interfaces aren't wired up.
*/
-static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_lirc_decode(struct rc_dev *dev, struct ir_raw_event ev)
{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- struct lirc_codec *lirc = &ir_dev->raw->lirc;
+ struct lirc_codec *lirc = &dev->raw->lirc;
int sample;
- if (!(ir_dev->raw->enabled_protocols & IR_TYPE_LIRC))
+ if (!(dev->raw->enabled_protocols & IR_TYPE_LIRC))
return 0;
- if (!ir_dev->raw->lirc.drv || !ir_dev->raw->lirc.drv->rbuf)
+ if (!dev->raw->lirc.drv || !dev->raw->lirc.drv->rbuf)
return -EINVAL;
/* Packet start */
@@ -79,7 +78,7 @@ static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
(u64)LIRC_VALUE_MASK);
gap_sample = LIRC_SPACE(lirc->gap_duration);
- lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
+ lirc_buffer_write(dev->raw->lirc.drv->rbuf,
(unsigned char *) &gap_sample);
lirc->gap = false;
}
@@ -88,9 +87,9 @@ static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
LIRC_SPACE(ev.duration / 1000);
}
- lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
+ lirc_buffer_write(dev->raw->lirc.drv->rbuf,
(unsigned char *) &sample);
- wake_up(&ir_dev->raw->lirc.drv->rbuf->wait_poll);
+ wake_up(&dev->raw->lirc.drv->rbuf->wait_poll);
return 0;
}
@@ -99,7 +98,7 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
size_t n, loff_t *ppos)
{
struct lirc_codec *lirc;
- struct ir_input_dev *ir_dev;
+ struct rc_dev *dev;
int *txbuf; /* buffer with values to transmit */
int ret = 0, count;
@@ -118,14 +117,14 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
if (IS_ERR(txbuf))
return PTR_ERR(txbuf);
- ir_dev = lirc->ir_dev;
- if (!ir_dev) {
+ dev = lirc->dev;
+ if (!dev) {
ret = -EFAULT;
goto out;
}
- if (ir_dev->props && ir_dev->props->tx_ir)
- ret = ir_dev->props->tx_ir(ir_dev->props->priv, txbuf, (u32)n);
+ if (dev->tx_ir)
+ ret = dev->tx_ir(dev, txbuf, (u32)n);
out:
kfree(txbuf);
@@ -136,21 +135,18 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
unsigned long __user arg)
{
struct lirc_codec *lirc;
- struct ir_input_dev *ir_dev;
+ struct rc_dev *dev;
int ret = 0;
- void *drv_data;
__u32 val = 0, tmp;
lirc = lirc_get_pdata(filep);
if (!lirc)
return -EFAULT;
- ir_dev = lirc->ir_dev;
- if (!ir_dev || !ir_dev->props || !ir_dev->props->priv)
+ dev = lirc->dev;
+ if (!dev)
return -EFAULT;
- drv_data = ir_dev->props->priv;
-
if (_IOC_DIR(cmd) & _IOC_WRITE) {
ret = get_user(val, (__u32 *)arg);
if (ret)
@@ -171,84 +167,85 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
/* TX settings */
case LIRC_SET_TRANSMITTER_MASK:
- if (!ir_dev->props->s_tx_mask)
+ if (!dev->s_tx_mask)
return -EINVAL;
- return ir_dev->props->s_tx_mask(drv_data, val);
+ return dev->s_tx_mask(dev, val);
case LIRC_SET_SEND_CARRIER:
- if (!ir_dev->props->s_tx_carrier)
+ if (!dev->s_tx_carrier)
return -EINVAL;
- return ir_dev->props->s_tx_carrier(drv_data, val);
+ return dev->s_tx_carrier(dev, val);
case LIRC_SET_SEND_DUTY_CYCLE:
- if (!ir_dev->props->s_tx_duty_cycle)
+ if (!dev->s_tx_duty_cycle)
return -ENOSYS;
if (val <= 0 || val >= 100)
return -EINVAL;
- return ir_dev->props->s_tx_duty_cycle(drv_data, val);
+ return dev->s_tx_duty_cycle(dev, val);
/* RX settings */
case LIRC_SET_REC_CARRIER:
- if (!ir_dev->props->s_rx_carrier_range)
+ if (!dev->s_rx_carrier_range)
return -ENOSYS;
if (val <= 0)
return -EINVAL;
- return ir_dev->props->s_rx_carrier_range(drv_data,
- ir_dev->raw->lirc.carrier_low, val);
+ return dev->s_rx_carrier_range(dev,
+ dev->raw->lirc.carrier_low,
+ val);
case LIRC_SET_REC_CARRIER_RANGE:
if (val <= 0)
return -EINVAL;
- ir_dev->raw->lirc.carrier_low = val;
+ dev->raw->lirc.carrier_low = val;
return 0;
case LIRC_GET_REC_RESOLUTION:
- val = ir_dev->props->rx_resolution;
+ val = dev->rx_resolution;
break;
case LIRC_SET_WIDEBAND_RECEIVER:
- if (!ir_dev->props->s_learning_mode)
+ if (!dev->s_learning_mode)
return -ENOSYS;
- return ir_dev->props->s_learning_mode(drv_data, !!val);
+ return dev->s_learning_mode(dev, !!val);
case LIRC_SET_MEASURE_CARRIER_MODE:
- if (!ir_dev->props->s_carrier_report)
+ if (!dev->s_carrier_report)
return -ENOSYS;
- return ir_dev->props->s_carrier_report(drv_data, !!val);
+ return dev->s_carrier_report(dev, !!val);
/* Generic timeout support */
case LIRC_GET_MIN_TIMEOUT:
- if (!ir_dev->props->max_timeout)
+ if (!dev->max_timeout)
return -ENOSYS;
- val = ir_dev->props->min_timeout / 1000;
+ val = dev->min_timeout / 1000;
break;
case LIRC_GET_MAX_TIMEOUT:
- if (!ir_dev->props->max_timeout)
+ if (!dev->max_timeout)
return -ENOSYS;
- val = ir_dev->props->max_timeout / 1000;
+ val = dev->max_timeout / 1000;
break;
case LIRC_SET_REC_TIMEOUT:
- if (!ir_dev->props->max_timeout)
+ if (!dev->max_timeout)
return -ENOSYS;
tmp = val * 1000;
- if (tmp < ir_dev->props->min_timeout ||
- tmp > ir_dev->props->max_timeout)
+ if (tmp < dev->min_timeout ||
+ tmp > dev->max_timeout)
return -EINVAL;
- ir_dev->props->timeout = tmp;
+ dev->timeout = tmp;
break;
case LIRC_SET_REC_TIMEOUT_REPORTS:
@@ -288,9 +285,8 @@ static struct file_operations lirc_fops = {
.release = lirc_dev_fop_close,
};
-static int ir_lirc_register(struct input_dev *input_dev)
+static int ir_lirc_register(struct rc_dev *dev)
{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
struct lirc_driver *drv;
struct lirc_buffer *rbuf;
int rc = -ENOMEM;
@@ -309,44 +305,40 @@ static int ir_lirc_register(struct input_dev *input_dev)
goto rbuf_init_failed;
features = LIRC_CAN_REC_MODE2;
- if (ir_dev->props->tx_ir) {
-
+ if (dev->tx_ir) {
features |= LIRC_CAN_SEND_PULSE;
- if (ir_dev->props->s_tx_mask)
+ if (dev->s_tx_mask)
features |= LIRC_CAN_SET_TRANSMITTER_MASK;
- if (ir_dev->props->s_tx_carrier)
+ if (dev->s_tx_carrier)
features |= LIRC_CAN_SET_SEND_CARRIER;
-
- if (ir_dev->props->s_tx_duty_cycle)
+ if (dev->s_tx_duty_cycle)
features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
}
- if (ir_dev->props->s_rx_carrier_range)
+ if (dev->s_rx_carrier_range)
features |= LIRC_CAN_SET_REC_CARRIER |
LIRC_CAN_SET_REC_CARRIER_RANGE;
- if (ir_dev->props->s_learning_mode)
+ if (dev->s_learning_mode)
features |= LIRC_CAN_USE_WIDEBAND_RECEIVER;
- if (ir_dev->props->s_carrier_report)
+ if (dev->s_carrier_report)
features |= LIRC_CAN_MEASURE_CARRIER;
-
- if (ir_dev->props->max_timeout)
+ if (dev->max_timeout)
features |= LIRC_CAN_SET_REC_TIMEOUT;
-
snprintf(drv->name, sizeof(drv->name), "ir-lirc-codec (%s)",
- ir_dev->driver_name);
+ dev->driver_name);
drv->minor = -1;
drv->features = features;
- drv->data = &ir_dev->raw->lirc;
+ drv->data = &dev->raw->lirc;
drv->rbuf = rbuf;
drv->set_use_inc = &ir_lirc_open;
drv->set_use_dec = &ir_lirc_close;
drv->code_length = sizeof(struct ir_raw_event) * 8;
drv->fops = &lirc_fops;
- drv->dev = &ir_dev->dev;
+ drv->dev = &dev->dev;
drv->owner = THIS_MODULE;
drv->minor = lirc_register_driver(drv);
@@ -355,8 +347,8 @@ static int ir_lirc_register(struct input_dev *input_dev)
goto lirc_register_failed;
}
- ir_dev->raw->lirc.drv = drv;
- ir_dev->raw->lirc.ir_dev = ir_dev;
+ dev->raw->lirc.drv = drv;
+ dev->raw->lirc.dev = dev;
return 0;
lirc_register_failed:
@@ -368,10 +360,9 @@ rbuf_alloc_failed:
return rc;
}
-static int ir_lirc_unregister(struct input_dev *input_dev)
+static int ir_lirc_unregister(struct rc_dev *dev)
{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- struct lirc_codec *lirc = &ir_dev->raw->lirc;
+ struct lirc_codec *lirc = &dev->raw->lirc;
lirc_unregister_driver(lirc->drv->minor);
lirc_buffer_free(lirc->drv->rbuf);
diff --git a/drivers/media/IR/ir-nec-decoder.c b/drivers/media/IR/ir-nec-decoder.c
index 70993f7..7ec1543 100644
--- a/drivers/media/IR/ir-nec-decoder.c
+++ b/drivers/media/IR/ir-nec-decoder.c
@@ -39,19 +39,18 @@ enum nec_state {
/**
* ir_nec_decode() - Decode one NEC pulse or space
- * @input_dev: the struct input_dev descriptor of the device
+ * @dev: the struct rc_dev descriptor of the device
* @duration: the struct ir_raw_event descriptor of the pulse/space
*
* This function returns -EINVAL if the pulse violates the state machine
*/
-static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- struct nec_dec *data = &ir_dev->raw->nec;
+ struct nec_dec *data = &dev->raw->nec;
u32 scancode;
u8 address, not_address, command, not_command;
- if (!(ir_dev->raw->enabled_protocols & IR_TYPE_NEC))
+ if (!(dev->raw->enabled_protocols & IR_TYPE_NEC))
return 0;
if (!is_timing_event(ev)) {
@@ -89,7 +88,7 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
data->state = STATE_BIT_PULSE;
return 0;
} else if (eq_margin(ev.duration, NEC_REPEAT_SPACE, NEC_UNIT / 2)) {
- ir_repeat(input_dev);
+ ir_repeat(dev);
IR_dprintk(1, "Repeat last key\n");
data->state = STATE_TRAILER_PULSE;
return 0;
@@ -115,7 +114,7 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
geq_margin(ev.duration,
NEC_TRAILER_SPACE, NEC_UNIT / 2)) {
IR_dprintk(1, "Repeat last key\n");
- ir_repeat(input_dev);
+ ir_repeat(dev);
data->state = STATE_INACTIVE;
return 0;
@@ -179,7 +178,7 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
if (data->is_nec_x)
data->necx_repeat = true;
- ir_keydown(input_dev, scancode, 0);
+ ir_keydown(dev, scancode, 0);
data->state = STATE_INACTIVE;
return 0;
}
diff --git a/drivers/media/IR/ir-rc5-decoder.c b/drivers/media/IR/ir-rc5-decoder.c
index 572ed4c..e200d5f 100644
--- a/drivers/media/IR/ir-rc5-decoder.c
+++ b/drivers/media/IR/ir-rc5-decoder.c
@@ -40,19 +40,18 @@ enum rc5_state {
/**
* ir_rc5_decode() - Decode one RC-5 pulse or space
- * @input_dev: the struct input_dev descriptor of the device
+ * @dev: the struct rc_dev descriptor of the device
* @ev: the struct ir_raw_event descriptor of the pulse/space
*
* This function returns -EINVAL if the pulse violates the state machine
*/
-static int ir_rc5_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_rc5_decode(struct rc_dev *dev, struct ir_raw_event ev)
{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- struct rc5_dec *data = &ir_dev->raw->rc5;
+ struct rc5_dec *data = &dev->raw->rc5;
u8 toggle;
u32 scancode;
- if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC5))
+ if (!(dev->raw->enabled_protocols & IR_TYPE_RC5))
return 0;
if (!is_timing_event(ev)) {
@@ -96,7 +95,7 @@ again:
return 0;
case STATE_BIT_END:
- if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+ if (!is_transition(&ev, &dev->raw->prev_ev))
break;
if (data->count == data->wanted_bits)
@@ -151,7 +150,7 @@ again:
scancode, toggle);
}
- ir_keydown(input_dev, scancode, toggle);
+ ir_keydown(dev, scancode, toggle);
data->state = STATE_INACTIVE;
return 0;
}
diff --git a/drivers/media/IR/ir-rc5-sz-decoder.c b/drivers/media/IR/ir-rc5-sz-decoder.c
index 7c41350..1e95b82 100644
--- a/drivers/media/IR/ir-rc5-sz-decoder.c
+++ b/drivers/media/IR/ir-rc5-sz-decoder.c
@@ -36,19 +36,18 @@ enum rc5_sz_state {
/**
* ir_rc5_sz_decode() - Decode one RC-5 Streamzap pulse or space
- * @input_dev: the struct input_dev descriptor of the device
+ * @dev: the struct rc_dev descriptor of the device
* @ev: the struct ir_raw_event descriptor of the pulse/space
*
* This function returns -EINVAL if the pulse violates the state machine
*/
-static int ir_rc5_sz_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_rc5_sz_decode(struct rc_dev *dev, struct ir_raw_event ev)
{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- struct rc5_sz_dec *data = &ir_dev->raw->rc5_sz;
+ struct rc5_sz_dec *data = &dev->raw->rc5_sz;
u8 toggle, command, system;
u32 scancode;
- if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC5_SZ))
+ if (!(dev->raw->enabled_protocols & IR_TYPE_RC5_SZ))
return 0;
if (!is_timing_event(ev)) {
@@ -91,7 +90,7 @@ again:
return 0;
case STATE_BIT_END:
- if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+ if (!is_transition(&ev, &dev->raw->prev_ev))
break;
if (data->count == data->wanted_bits)
@@ -115,7 +114,7 @@ again:
IR_dprintk(1, "RC5-sz scancode 0x%04x (toggle: %u)\n",
scancode, toggle);
- ir_keydown(input_dev, scancode, toggle);
+ ir_keydown(dev, scancode, toggle);
data->state = STATE_INACTIVE;
return 0;
}
diff --git a/drivers/media/IR/ir-rc6-decoder.c b/drivers/media/IR/ir-rc6-decoder.c
index d25da91..26cf32f 100644
--- a/drivers/media/IR/ir-rc6-decoder.c
+++ b/drivers/media/IR/ir-rc6-decoder.c
@@ -70,19 +70,18 @@ static enum rc6_mode rc6_mode(struct rc6_dec *data)
/**
* ir_rc6_decode() - Decode one RC6 pulse or space
- * @input_dev: the struct input_dev descriptor of the device
+ * @dev: the struct rc_dev descriptor of the device
* @ev: the struct ir_raw_event descriptor of the pulse/space
*
* This function returns -EINVAL if the pulse violates the state machine
*/
-static int ir_rc6_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_rc6_decode(struct rc_dev *dev, struct ir_raw_event ev)
{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- struct rc6_dec *data = &ir_dev->raw->rc6;
+ struct rc6_dec *data = &dev->raw->rc6;
u32 scancode;
u8 toggle;
- if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC6))
+ if (!(dev->raw->enabled_protocols & IR_TYPE_RC6))
return 0;
if (!is_timing_event(ev)) {
@@ -139,7 +138,7 @@ again:
return 0;
case STATE_HEADER_BIT_END:
- if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+ if (!is_transition(&ev, &dev->raw->prev_ev))
break;
if (data->count == RC6_HEADER_NBITS)
@@ -159,7 +158,7 @@ again:
return 0;
case STATE_TOGGLE_END:
- if (!is_transition(&ev, &ir_dev->raw->prev_ev) ||
+ if (!is_transition(&ev, &dev->raw->prev_ev) ||
!geq_margin(ev.duration, RC6_TOGGLE_END, RC6_UNIT / 2))
break;
@@ -204,7 +203,7 @@ again:
return 0;
case STATE_BODY_BIT_END:
- if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+ if (!is_transition(&ev, &dev->raw->prev_ev))
break;
if (data->count == data->wanted_bits)
@@ -243,7 +242,7 @@ again:
goto out;
}
- ir_keydown(input_dev, scancode, toggle);
+ ir_keydown(dev, scancode, toggle);
data->state = STATE_INACTIVE;
return 0;
}
diff --git a/drivers/media/IR/ir-sony-decoder.c b/drivers/media/IR/ir-sony-decoder.c
index 2d15730..ff1b46d 100644
--- a/drivers/media/IR/ir-sony-decoder.c
+++ b/drivers/media/IR/ir-sony-decoder.c
@@ -33,19 +33,18 @@ enum sony_state {
/**
* ir_sony_decode() - Decode one Sony pulse or space
- * @input_dev: the struct input_dev descriptor of the device
+ * @dev: the struct rc_dev descriptor of the device
* @ev: the struct ir_raw_event descriptor of the pulse/space
*
* This function returns -EINVAL if the pulse violates the state machine
*/
-static int ir_sony_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- struct sony_dec *data = &ir_dev->raw->sony;
+ struct sony_dec *data = &dev->raw->sony;
u32 scancode;
u8 device, subdevice, function;
- if (!(ir_dev->raw->enabled_protocols & IR_TYPE_SONY))
+ if (!(dev->raw->enabled_protocols & IR_TYPE_SONY))
return 0;
if (!is_timing_event(ev)) {
@@ -144,7 +143,7 @@ static int ir_sony_decode(struct input_dev *input_dev, struct ir_raw_event ev)
scancode = device << 16 | subdevice << 8 | function;
IR_dprintk(1, "Sony(%u) scancode 0x%05x\n", data->count, scancode);
- ir_keydown(input_dev, scancode, 0);
+ ir_keydown(dev, scancode, 0);
data->state = STATE_INACTIVE;
return 0;
}
diff --git a/drivers/media/IR/mceusb.c b/drivers/media/IR/mceusb.c
index 9dce684..7772629 100644
--- a/drivers/media/IR/mceusb.c
+++ b/drivers/media/IR/mceusb.c
@@ -36,9 +36,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/usb.h>
-#include <linux/input.h>
#include <media/ir-core.h>
-#include <media/ir-common.h>
#define DRIVER_VERSION "1.91"
#define DRIVER_AUTHOR "Jarod Wilson <jarod@wilsonet.com>"
@@ -302,12 +300,11 @@ static struct usb_device_id mceusb_dev_table[] = {
/* data structure for each usb transceiver */
struct mceusb_dev {
/* ir-core bits */
- struct ir_dev_props *props;
+ struct rc_dev *rc;
struct ir_raw_event rawir;
/* core device bits */
struct device *dev;
- struct input_dev *idev;
/* usb */
struct usb_device *usbdev;
@@ -639,9 +636,9 @@ static void mce_sync_in(struct mceusb_dev *ir, unsigned char *data, int size)
}
/* Send data out the IR blaster port(s) */
-static int mceusb_tx_ir(void *priv, int *txbuf, u32 n)
+static int mceusb_tx_ir(struct rc_dev *dev, int *txbuf, u32 n)
{
- struct mceusb_dev *ir = priv;
+ struct mceusb_dev *ir = dev->priv;
int i, ret = 0;
int count, cmdcount = 0;
unsigned char *cmdbuf; /* MCE command buffer */
@@ -725,9 +722,9 @@ out:
}
/* Sets active IR outputs -- mce devices typically (all?) have two */
-static int mceusb_set_tx_mask(void *priv, u32 mask)
+static int mceusb_set_tx_mask(struct rc_dev *dev, u32 mask)
{
- struct mceusb_dev *ir = priv;
+ struct mceusb_dev *ir = dev->priv;
if (ir->flags.tx_mask_inverted)
ir->tx_mask = (mask != MCE_DEFAULT_TX_MASK ?
@@ -739,9 +736,9 @@ static int mceusb_set_tx_mask(void *priv, u32 mask)
}
/* Sets the send carrier frequency and mode */
-static int mceusb_set_tx_carrier(void *priv, u32 carrier)
+static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier)
{
- struct mceusb_dev *ir = priv;
+ struct mceusb_dev *ir = dev->priv;
int clk = 10000000;
int prescaler = 0, divisor = 0;
unsigned char cmdbuf[4] = { MCE_COMMAND_HEADER,
@@ -823,7 +820,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
rawir.pulse ? "pulse" : "space",
rawir.duration);
- ir_raw_event_store(ir->idev, &rawir);
+ ir_raw_event_store(ir->rc, &rawir);
break;
case CMD_DATA:
ir->rem--;
@@ -857,7 +854,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
ir->parser_state = CMD_HEADER;
}
dev_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n");
- ir_raw_event_handle(ir->idev);
+ ir_raw_event_handle(ir->rc);
}
static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
@@ -997,66 +994,50 @@ static void mceusb_get_parameters(struct mceusb_dev *ir)
mce_sync_in(ir, NULL, maxp);
}
-static struct input_dev *mceusb_init_input_dev(struct mceusb_dev *ir)
+static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
{
- struct input_dev *idev;
- struct ir_dev_props *props;
struct device *dev = ir->dev;
- const char *rc_map = RC_MAP_RC6_MCE;
- const char *name = "Media Center Ed. eHome Infrared Remote Transceiver";
- int ret = -ENODEV;
-
- idev = input_allocate_device();
- if (!idev) {
- dev_err(dev, "remote input dev allocation failed\n");
- goto idev_alloc_failed;
- }
+ struct rc_dev *rc;
+ int ret;
- ret = -ENOMEM;
- props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
- if (!props) {
- dev_err(dev, "remote ir dev props allocation failed\n");
- goto props_alloc_failed;
+ rc = rc_allocate_device();
+ if (!rc) {
+ dev_err(dev, "remote dev allocation failed\n");
+ goto out;
}
- if (mceusb_model[ir->model].name)
- name = mceusb_model[ir->model].name;
-
snprintf(ir->name, sizeof(ir->name), "%s (%04x:%04x)",
- name,
+ mceusb_model[ir->model].name ?
+ mceusb_model[ir->model].name :
+ "Media Center Ed. eHome Infrared Remote Transceiver",
le16_to_cpu(ir->usbdev->descriptor.idVendor),
le16_to_cpu(ir->usbdev->descriptor.idProduct));
- idev->name = ir->name;
usb_make_path(ir->usbdev, ir->phys, sizeof(ir->phys));
strlcat(ir->phys, "/input0", sizeof(ir->phys));
- idev->phys = ir->phys;
-
- props->priv = ir;
- props->driver_type = RC_DRIVER_IR_RAW;
- props->allowed_protos = IR_TYPE_ALL;
- props->s_tx_mask = mceusb_set_tx_mask;
- props->s_tx_carrier = mceusb_set_tx_carrier;
- props->tx_ir = mceusb_tx_ir;
- ir->props = props;
-
- if (mceusb_model[ir->model].rc_map)
- rc_map = mceusb_model[ir->model].rc_map;
-
- ret = ir_input_register(idev, rc_map, props, DRIVER_NAME);
+ rc->input_name = ir->name;
+ rc->input_phys = ir->phys;
+ rc->priv = ir;
+ rc->driver_type = RC_DRIVER_IR_RAW;
+ rc->allowed_protos = IR_TYPE_ALL;
+ rc->s_tx_mask = mceusb_set_tx_mask;
+ rc->s_tx_carrier = mceusb_set_tx_carrier;
+ rc->tx_ir = mceusb_tx_ir;
+ rc->driver_name = DRIVER_NAME;
+ rc->map_name = mceusb_model[ir->model].rc_map ?
+ mceusb_model[ir->model].rc_map : RC_MAP_RC6_MCE;
+
+ ret = rc_register_device(rc);
if (ret < 0) {
- dev_err(dev, "remote input device register failed\n");
- goto irdev_failed;
+ dev_err(dev, "remote dev registration failed\n");
+ goto out;
}
- return idev;
+ return rc;
-irdev_failed:
- kfree(props);
-props_alloc_failed:
- input_free_device(idev);
-idev_alloc_failed:
+out:
+ rc_free_device(rc);
return NULL;
}
@@ -1169,9 +1150,9 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
snprintf(name + strlen(name), sizeof(name) - strlen(name),
" %s", buf);
- ir->idev = mceusb_init_input_dev(ir);
- if (!ir->idev)
- goto input_dev_fail;
+ ir->rc = mceusb_init_rc_dev(ir);
+ if (!ir->rc)
+ goto rc_dev_fail;
/* flush buffers on the device */
mce_sync_in(ir, NULL, maxp);
@@ -1191,7 +1172,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
mceusb_get_parameters(ir);
- mceusb_set_tx_mask(ir, MCE_DEFAULT_TX_MASK);
+ mceusb_set_tx_mask(ir->rc, MCE_DEFAULT_TX_MASK);
usb_set_intfdata(intf, ir);
@@ -1201,7 +1182,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
return 0;
/* Error-handling path */
-input_dev_fail:
+rc_dev_fail:
usb_free_urb(ir->urb_in);
urb_in_alloc_fail:
usb_free_coherent(dev, maxp, ir->buf_in, ir->dma_in);
@@ -1225,7 +1206,7 @@ static void __devexit mceusb_dev_disconnect(struct usb_interface *intf)
return;
ir->usbdev = NULL;
- ir_input_unregister(ir->idev);
+ rc_unregister_device(ir->rc);
usb_kill_urb(ir->urb_in);
usb_free_urb(ir->urb_in);
usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in);
diff --git a/drivers/media/IR/nuvoton-cir.c b/drivers/media/IR/nuvoton-cir.c
index 301be53..82f23bd 100644
--- a/drivers/media/IR/nuvoton-cir.c
+++ b/drivers/media/IR/nuvoton-cir.c
@@ -32,7 +32,6 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/input.h>
#include <media/ir-core.h>
#include <linux/pci_ids.h>
@@ -476,9 +475,9 @@ static u32 nvt_rx_carrier_detect(struct nvt_dev *nvt)
* always set CP as 0x81
* set CC by SPEC, CC = 3MHz/carrier - 1
*/
-static int nvt_set_tx_carrier(void *data, u32 carrier)
+static int nvt_set_tx_carrier(struct rc_dev *dev, u32 carrier)
{
- struct nvt_dev *nvt = data;
+ struct nvt_dev *nvt = dev->priv;
u16 val;
nvt_cir_reg_write(nvt, 1, CIR_CP);
@@ -509,9 +508,9 @@ static int nvt_set_tx_carrier(void *data, u32 carrier)
* number may larger than TXFCONT (0xff). So in interrupt_handler, it has to
* set TXFCONT as 0xff, until buf_count less than 0xff.
*/
-static int nvt_tx_ir(void *priv, int *txbuf, u32 n)
+static int nvt_tx_ir(struct rc_dev *dev, int *txbuf, u32 n)
{
- struct nvt_dev *nvt = priv;
+ struct nvt_dev *nvt = dev->priv;
unsigned long flags;
size_t cur_count;
unsigned int i;
@@ -942,9 +941,9 @@ static void nvt_disable_cir(struct nvt_dev *nvt)
nvt_efm_disable(nvt);
}
-static int nvt_open(void *data)
+static int nvt_open(struct rc_dev *dev)
{
- struct nvt_dev *nvt = (struct nvt_dev *)data;
+ struct nvt_dev *nvt = dev->priv;
unsigned long flags;
spin_lock_irqsave(&nvt->nvt_lock, flags);
@@ -955,9 +954,9 @@ static int nvt_open(void *data)
return 0;
}
-static void nvt_close(void *data)
+static void nvt_close(struct rc_dev *dev)
{
- struct nvt_dev *nvt = (struct nvt_dev *)data;
+ struct nvt_dev *nvt = dev->priv;
unsigned long flags;
spin_lock_irqsave(&nvt->nvt_lock, flags);
@@ -969,21 +968,16 @@ static void nvt_close(void *data)
/* Allocate memory, probe hardware, and initialize everything */
static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
{
- struct nvt_dev *nvt = NULL;
- struct input_dev *rdev = NULL;
- struct ir_dev_props *props = NULL;
+ struct nvt_dev *nvt;
+ struct rc_dev *rdev;
int ret = -ENOMEM;
nvt = kzalloc(sizeof(struct nvt_dev), GFP_KERNEL);
if (!nvt)
return ret;
- props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
- if (!props)
- goto failure;
-
/* input device for IR remote (and tx) */
- rdev = input_allocate_device();
+ rdev = rc_allocate_device();
if (!rdev)
goto failure;
@@ -1057,41 +1051,38 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
nvt_cir_regs_init(nvt);
nvt_cir_wake_regs_init(nvt);
- /* Set up ir-core props */
- props->priv = nvt;
- props->driver_type = RC_DRIVER_IR_RAW;
- props->allowed_protos = IR_TYPE_ALL;
- props->open = nvt_open;
- props->close = nvt_close;
+ /* Set up the rc device */
+ rdev->priv = nvt;
+ rdev->driver_type = RC_DRIVER_IR_RAW;
+ rdev->allowed_protos = IR_TYPE_ALL;
+ rdev->open = nvt_open;
+ rdev->close = nvt_close;
+ rdev->tx_ir = nvt_tx_ir;
+ rdev->s_tx_carrier = nvt_set_tx_carrier;
+ rdev->input_name = "Nuvoton w836x7hg Infrared Remote Transceiver";
+ rdev->input_id.bustype = BUS_HOST;
+ rdev->input_id.vendor = PCI_VENDOR_ID_WINBOND2;
+ rdev->input_id.product = nvt->chip_major;
+ rdev->input_id.version = nvt->chip_minor;
+ rdev->driver_name = NVT_DRIVER_NAME;
+ rdev->map_name = RC_MAP_RC6_MCE;
#if 0
- props->min_timeout = XYZ;
- props->max_timeout = XYZ;
- props->timeout = XYZ;
+ rdev->min_timeout = XYZ;
+ rdev->max_timeout = XYZ;
+ rdev->timeout = XYZ;
/* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
- props->rx_resolution = XYZ;
-
+ rdev->rx_resolution = XYZ;
/* tx bits */
- props->tx_resolution = XYZ;
+ rdev->tx_resolution = XYZ;
#endif
- props->tx_ir = nvt_tx_ir;
- props->s_tx_carrier = nvt_set_tx_carrier;
-
- rdev->name = "Nuvoton w836x7hg Infrared Remote Transceiver";
- rdev->id.bustype = BUS_HOST;
- rdev->id.vendor = PCI_VENDOR_ID_WINBOND2;
- rdev->id.product = nvt->chip_major;
- rdev->id.version = nvt->chip_minor;
-
- nvt->props = props;
- nvt->rdev = rdev;
- device_set_wakeup_capable(&pdev->dev, 1);
- device_set_wakeup_enable(&pdev->dev, 1);
-
- ret = ir_input_register(rdev, RC_MAP_RC6_MCE, props, NVT_DRIVER_NAME);
+ ret = rc_register_device(rdev);
if (ret)
goto failure;
+ device_set_wakeup_capable(&pdev->dev, 1);
+ device_set_wakeup_enable(&pdev->dev, 1);
+ nvt->rdev = rdev;
nvt_pr(KERN_NOTICE, "driver has been successfully loaded\n");
if (debug) {
cir_dump_regs(nvt);
@@ -1111,8 +1102,7 @@ failure:
if (nvt->cir_wake_addr)
release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH);
- input_free_device(rdev);
- kfree(props);
+ rc_free_device(rdev);
kfree(nvt);
return ret;
@@ -1137,9 +1127,8 @@ static void __devexit nvt_remove(struct pnp_dev *pdev)
release_region(nvt->cir_addr, CIR_IOREG_LENGTH);
release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH);
- ir_input_unregister(nvt->rdev);
+ rc_unregister_device(nvt->rdev);
- kfree(nvt->props);
kfree(nvt);
}
diff --git a/drivers/media/IR/nuvoton-cir.h b/drivers/media/IR/nuvoton-cir.h
index 62dc530..1df8235 100644
--- a/drivers/media/IR/nuvoton-cir.h
+++ b/drivers/media/IR/nuvoton-cir.h
@@ -66,8 +66,7 @@ static int debug;
struct nvt_dev {
struct pnp_dev *pdev;
- struct input_dev *rdev;
- struct ir_dev_props *props;
+ struct rc_dev *rdev;
struct ir_raw_event rawir;
spinlock_t nvt_lock;
diff --git a/drivers/media/IR/rc-main.c b/drivers/media/IR/rc-main.c
index 93a5fdc..aaaaed6 100644
--- a/drivers/media/IR/rc-main.c
+++ b/drivers/media/IR/rc-main.c
@@ -20,11 +20,6 @@
#include <linux/device.h>
#include "ir-core-priv.h"
-#define IRRCV_NUM_DEVICES 256
-
-/* bit array to represent IR sysfs device number */
-static unsigned long ir_core_dev_number;
-
/* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */
#define IR_TAB_MIN_SIZE 256
#define IR_TAB_MAX_SIZE 8192
@@ -36,12 +31,6 @@ static unsigned long ir_core_dev_number;
static LIST_HEAD(rc_map_list);
static DEFINE_SPINLOCK(rc_map_lock);
-/* Forward declarations */
-static int ir_register_class(struct input_dev *input_dev);
-static void ir_unregister_class(struct input_dev *input_dev);
-static int ir_register_input(struct input_dev *input_dev)
-
-
static struct rc_keymap *seek_rc_map(const char *name)
{
struct rc_keymap *map = NULL;
@@ -127,7 +116,7 @@ static struct rc_keymap empty_map = {
* @return: zero on success or a negative error code
*
* This routine will initialize the ir_scancode_table and will allocate
- * memory to hold at least the specified number elements.
+ * memory to hold at least the specified number of elements.
*/
static int ir_create_table(struct ir_scancode_table *rc_tab,
const char *name, u64 ir_type, size_t size)
@@ -209,16 +198,16 @@ static int ir_resize_table(struct ir_scancode_table *rc_tab, gfp_t gfp_flags)
/**
* ir_update_mapping() - set a keycode in the scancode->keycode table
- * @dev: the struct input_dev device descriptor
+ * @dev: the struct rc_dev device descriptor
* @rc_tab: scancode table to be adjusted
* @index: index of the mapping that needs to be updated
* @keycode: the desired keycode
* @return: previous keycode assigned to the mapping
*
- * This routine is used to update scancode->keycopde mapping at given
+ * This routine is used to update scancode->keycode mapping at given
* position.
*/
-static unsigned int ir_update_mapping(struct input_dev *dev,
+static unsigned int ir_update_mapping(struct rc_dev *dev,
struct ir_scancode_table *rc_tab,
unsigned int index,
unsigned int new_keycode)
@@ -239,16 +228,16 @@ static unsigned int ir_update_mapping(struct input_dev *dev,
old_keycode == KEY_RESERVED ? "New" : "Replacing",
rc_tab->scan[index].scancode, new_keycode);
rc_tab->scan[index].keycode = new_keycode;
- __set_bit(new_keycode, dev->keybit);
+ __set_bit(new_keycode, dev->input_dev->keybit);
}
if (old_keycode != KEY_RESERVED) {
/* A previous mapping was updated... */
- __clear_bit(old_keycode, dev->keybit);
+ __clear_bit(old_keycode, dev->input_dev->keybit);
/* ... but another scancode might use the same keycode */
for (i = 0; i < rc_tab->len; i++) {
if (rc_tab->scan[i].keycode == old_keycode) {
- __set_bit(old_keycode, dev->keybit);
+ __set_bit(old_keycode, dev->input_dev->keybit);
break;
}
}
@@ -262,7 +251,7 @@ static unsigned int ir_update_mapping(struct input_dev *dev,
/**
* ir_establish_scancode() - set a keycode in the scancode->keycode table
- * @ir_dev: the struct ir_input_dev device descriptor
+ * @dev: the struct rc_dev device descriptor
* @rc_tab: scancode table to be searched
* @scancode: the desired scancode
* @resize: controls whether we allowed to resize the table to
@@ -274,7 +263,7 @@ static unsigned int ir_update_mapping(struct input_dev *dev,
* If scancode is not yet present the routine will allocate a new slot
* for it.
*/
-static unsigned int ir_establish_scancode(struct ir_input_dev *ir_dev,
+static unsigned int ir_establish_scancode(struct rc_dev *dev,
struct ir_scancode_table *rc_tab,
unsigned int scancode,
bool resize)
@@ -286,10 +275,11 @@ static unsigned int ir_establish_scancode(struct ir_input_dev *ir_dev,
* all bits for the complete IR code. In general, they provide only
* the command part of the IR code. Yet, as it is possible to replace
* the provided IR with another one, it is needed to allow loading
- * IR tables from other remotes. So,
+ * IR tables from other remotes. So, we support specifying a mask to
+ * indicate the valid bits of the scancodes.
*/
- if (ir_dev->props && ir_dev->props->scanmask)
- scancode &= ir_dev->props->scanmask;
+ if (dev->scanmask)
+ scancode &= dev->scanmask;
/* First check if we already have a mapping for this ir command */
for (i = 0; i < rc_tab->len; i++) {
@@ -320,19 +310,19 @@ static unsigned int ir_establish_scancode(struct ir_input_dev *ir_dev,
/**
* ir_setkeycode() - set a keycode in the scancode->keycode table
- * @dev: the struct input_dev device descriptor
+ * @idev: the struct input_dev device descriptor
* @scancode: the desired scancode
* @keycode: result
* @return: -EINVAL if the keycode could not be inserted, otherwise zero.
*
* This routine is used to handle evdev EVIOCSKEY ioctl.
*/
-static int ir_setkeycode(struct input_dev *dev,
+static int ir_setkeycode(struct input_dev *idev,
const struct input_keymap_entry *ke,
unsigned int *old_keycode)
{
- struct ir_input_dev *ir_dev = input_get_drvdata(dev);
- struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+ struct rc_dev *rdev = input_get_drvdata(idev);
+ struct ir_scancode_table *rc_tab = &rdev->rc_tab;
unsigned int index;
unsigned int scancode;
int retval;
@@ -351,14 +341,14 @@ static int ir_setkeycode(struct input_dev *dev,
if (retval)
goto out;
- index = ir_establish_scancode(ir_dev, rc_tab, scancode, true);
+ index = ir_establish_scancode(rdev, rc_tab, scancode, true);
if (index >= rc_tab->len) {
retval = -ENOMEM;
goto out;
}
}
- *old_keycode = ir_update_mapping(dev, rc_tab, index, ke->keycode);
+ *old_keycode = ir_update_mapping(rdev, rc_tab, index, ke->keycode);
out:
spin_unlock_irqrestore(&rc_tab->lock, flags);
@@ -367,22 +357,22 @@ out:
/**
* ir_setkeytable() - sets several entries in the scancode->keycode table
- * @dev: the struct input_dev device descriptor
+ * @dev: the struct rc_dev device descriptor
* @to: the struct ir_scancode_table to copy entries to
* @from: the struct ir_scancode_table to copy entries from
* @return: -ENOMEM if all keycodes could not be inserted, otherwise zero.
*
* This routine is used to handle table initialization.
*/
-static int ir_setkeytable(struct ir_input_dev *ir_dev,
+static int ir_setkeytable(struct rc_dev *dev,
const struct ir_scancode_table *from)
{
- struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+ struct ir_scancode_table *rc_tab = &dev->rc_tab;
unsigned int i, index;
int rc;
- rc = ir_create_table(&ir_dev->rc_tab,
- from->name, from->ir_type, from->size);
+ rc = ir_create_table(rc_tab, from->name,
+ from->ir_type, from->size);
if (rc)
return rc;
@@ -390,14 +380,14 @@ static int ir_setkeytable(struct ir_input_dev *ir_dev,
rc_tab->size, rc_tab->alloc);
for (i = 0; i < from->size; i++) {
- index = ir_establish_scancode(ir_dev, rc_tab,
+ index = ir_establish_scancode(dev, rc_tab,
from->scan[i].scancode, false);
if (index >= rc_tab->len) {
rc = -ENOMEM;
break;
}
- ir_update_mapping(ir_dev->input_dev, rc_tab, index,
+ ir_update_mapping(dev, rc_tab, index,
from->scan[i].keycode);
}
@@ -409,7 +399,7 @@ static int ir_setkeytable(struct ir_input_dev *ir_dev,
/**
* ir_lookup_by_scancode() - locate mapping by scancode
- * @rc_tab: the &struct ir_scancode_table to search
+ * @rc_tab: the struct ir_scancode_table to search
* @scancode: scancode to look for in the table
* @return: index in the table, -1U if not found
*
@@ -438,18 +428,18 @@ static unsigned int ir_lookup_by_scancode(const struct ir_scancode_table *rc_tab
/**
* ir_getkeycode() - get a keycode from the scancode->keycode table
- * @dev: the struct input_dev device descriptor
+ * @idev: the struct input_dev device descriptor
* @scancode: the desired scancode
* @keycode: used to return the keycode, if found, or KEY_RESERVED
* @return: always returns zero.
*
* This routine is used to handle evdev EVIOCGKEY ioctl.
*/
-static int ir_getkeycode(struct input_dev *dev,
+static int ir_getkeycode(struct input_dev *idev,
struct input_keymap_entry *ke)
{
- struct ir_input_dev *ir_dev = input_get_drvdata(dev);
- struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+ struct rc_dev *rdev = input_get_drvdata(idev);
+ struct ir_scancode_table *rc_tab = &rdev->rc_tab;
struct ir_scancode *entry;
unsigned long flags;
unsigned int index;
@@ -490,18 +480,17 @@ out:
/**
* ir_g_keycode_from_table() - gets the keycode that corresponds to a scancode
- * @input_dev: the struct input_dev descriptor of the device
- * @scancode: the scancode that we're seeking
+ * @dev: the struct rc_dev descriptor of the device
+ * @scancode: the scancode to look for
+ * @return: the corresponding keycode, or KEY_RESERVED
*
- * This routine is used by the input routines when a key is pressed at the
- * IR. The scancode is received and needs to be converted into a keycode.
- * If the key is not found, it returns KEY_RESERVED. Otherwise, returns the
- * corresponding keycode from the table.
+ * This routine is used by drivers which need to convert a scancode to a
+ * keycode. Normally it should not be used since drivers should have no
+ * interest in keycodes.
*/
-u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
+u32 ir_g_keycode_from_table(struct rc_dev *dev, u32 scancode)
{
- struct ir_input_dev *ir_dev = input_get_drvdata(dev);
- struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+ struct ir_scancode_table *rc_tab = &dev->rc_tab;
unsigned int keycode;
unsigned int index;
unsigned long flags;
@@ -516,7 +505,7 @@ u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
if (keycode != KEY_RESERVED)
IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
- dev->name, scancode, keycode);
+ dev->input_name, scancode, keycode);
return keycode;
}
@@ -524,50 +513,49 @@ EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
/**
* ir_do_keyup() - internal function to signal the release of a keypress
- * @ir: the struct ir_input_dev descriptor of the device
+ * @dev: the struct rc_dev descriptor of the device
*
* This function is used internally to release a keypress, it must be
* called with keylock held.
*/
-static void ir_do_keyup(struct ir_input_dev *ir)
+static void ir_do_keyup(struct rc_dev *dev)
{
- if (!ir->keypressed)
+ if (!dev->keypressed)
return;
- IR_dprintk(1, "keyup key 0x%04x\n", ir->last_keycode);
- input_report_key(ir->input_dev, ir->last_keycode, 0);
- input_sync(ir->input_dev);
- ir->keypressed = false;
+ IR_dprintk(1, "keyup key 0x%04x\n", dev->last_keycode);
+ input_report_key(dev->input_dev, dev->last_keycode, 0);
+ input_sync(dev->input_dev);
+ dev->keypressed = false;
}
/**
- * ir_keyup() - generates input event to signal the release of a keypress
- * @dev: the struct input_dev descriptor of the device
+ * ir_keyup() - signals the release of a keypress
+ * @dev: the struct rc_dev descriptor of the device
*
* This routine is used to signal that a key has been released on the
* remote control.
*/
-void ir_keyup(struct input_dev *dev)
+void ir_keyup(struct rc_dev *dev)
{
unsigned long flags;
- struct ir_input_dev *ir = input_get_drvdata(dev);
- spin_lock_irqsave(&ir->keylock, flags);
- ir_do_keyup(ir);
- spin_unlock_irqrestore(&ir->keylock, flags);
+ spin_lock_irqsave(&dev->keylock, flags);
+ ir_do_keyup(dev);
+ spin_unlock_irqrestore(&dev->keylock, flags);
}
EXPORT_SYMBOL_GPL(ir_keyup);
/**
* ir_timer_keyup() - generates a keyup event after a timeout
- * @cookie: a pointer to struct ir_input_dev passed to setup_timer()
+ * @cookie: a pointer to the struct rc_dev for the device
*
* This routine will generate a keyup event some time after a keydown event
* is generated when no further activity has been detected.
*/
static void ir_timer_keyup(unsigned long cookie)
{
- struct ir_input_dev *ir = (struct ir_input_dev *)cookie;
+ struct rc_dev *dev = (struct rc_dev *)cookie;
unsigned long flags;
/*
@@ -580,43 +568,42 @@ static void ir_timer_keyup(unsigned long cookie)
* to allow the input subsystem to do its auto-repeat magic or
* a keyup event might follow immediately after the keydown.
*/
- spin_lock_irqsave(&ir->keylock, flags);
- if (time_is_before_eq_jiffies(ir->keyup_jiffies))
- ir_do_keyup(ir);
- spin_unlock_irqrestore(&ir->keylock, flags);
+ spin_lock_irqsave(&dev->keylock, flags);
+ if (time_is_before_eq_jiffies(dev->keyup_jiffies))
+ ir_do_keyup(dev);
+ spin_unlock_irqrestore(&dev->keylock, flags);
}
/**
- * ir_repeat() - notifies the IR core that a key is still pressed
- * @dev: the struct input_dev descriptor of the device
+ * ir_repeat() - signals that a key is still pressed
+ * @dev: the struct rc_dev descriptor of the device
*
* This routine is used by IR decoders when a repeat message which does
* not include the necessary bits to reproduce the scancode has been
* received.
*/
-void ir_repeat(struct input_dev *dev)
+void ir_repeat(struct rc_dev *dev)
{
unsigned long flags;
- struct ir_input_dev *ir = input_get_drvdata(dev);
- spin_lock_irqsave(&ir->keylock, flags);
+ spin_lock_irqsave(&dev->keylock, flags);
- input_event(dev, EV_MSC, MSC_SCAN, ir->last_scancode);
+ input_event(dev->input_dev, EV_MSC, MSC_SCAN, dev->last_scancode);
- if (!ir->keypressed)
+ if (!dev->keypressed)
goto out;
- ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
- mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
+ dev->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
+ mod_timer(&dev->timer_keyup, dev->keyup_jiffies);
out:
- spin_unlock_irqrestore(&ir->keylock, flags);
+ spin_unlock_irqrestore(&dev->keylock, flags);
}
EXPORT_SYMBOL_GPL(ir_repeat);
/**
* ir_do_keydown() - internal function to process a keypress
- * @dev: the struct input_dev descriptor of the device
+ * @dev: the struct rc_dev descriptor of the device
* @scancode: the scancode of the keypress
* @keycode: the keycode of the keypress
* @toggle: the toggle value of the keypress
@@ -624,231 +611,96 @@ EXPORT_SYMBOL_GPL(ir_repeat);
* This function is used internally to register a keypress, it must be
* called with keylock held.
*/
-static void ir_do_keydown(struct input_dev *dev, int scancode,
+static void ir_do_keydown(struct rc_dev *dev, int scancode,
u32 keycode, u8 toggle)
{
- struct ir_input_dev *ir = input_get_drvdata(dev);
-
- input_event(dev, EV_MSC, MSC_SCAN, scancode);
+ input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode);
/* Repeat event? */
- if (ir->keypressed &&
- ir->last_scancode == scancode &&
- ir->last_toggle == toggle)
+ if (dev->keypressed &&
+ dev->last_scancode == scancode &&
+ dev->last_toggle == toggle)
return;
/* Release old keypress */
- ir_do_keyup(ir);
+ ir_do_keyup(dev);
- ir->last_scancode = scancode;
- ir->last_toggle = toggle;
- ir->last_keycode = keycode;
+ dev->last_scancode = scancode;
+ dev->last_toggle = toggle;
+ dev->last_keycode = keycode;
if (keycode == KEY_RESERVED)
return;
/* Register a keypress */
- ir->keypressed = true;
+ dev->keypressed = true;
IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
- dev->name, keycode, scancode);
- input_report_key(dev, ir->last_keycode, 1);
- input_sync(dev);
+ dev->input_name, keycode, scancode);
+ input_report_key(dev->input_dev, dev->last_keycode, 1);
+ input_sync(dev->input_dev);
}
/**
* ir_keydown() - generates input event for a key press
- * @dev: the struct input_dev descriptor of the device
+ * @dev: the struct rc_dev descriptor of the device
* @scancode: the scancode that we're seeking
* @toggle: the toggle value (protocol dependent, if the protocol doesn't
* support toggle values, this should be set to zero)
*
- * This routine is used by the input routines when a key is pressed at the
- * IR. It gets the keycode for a scancode and reports an input event via
- * input_report_key().
+ * This routine is used to signal that a key has been pressed on the
+ * remote control.
*/
-void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
+void ir_keydown(struct rc_dev *dev, int scancode, u8 toggle)
{
unsigned long flags;
- struct ir_input_dev *ir = input_get_drvdata(dev);
u32 keycode = ir_g_keycode_from_table(dev, scancode);
- spin_lock_irqsave(&ir->keylock, flags);
+ spin_lock_irqsave(&dev->keylock, flags);
ir_do_keydown(dev, scancode, keycode, toggle);
- if (ir->keypressed) {
- ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
- mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
+ if (dev->keypressed) {
+ dev->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
+ mod_timer(&dev->timer_keyup, dev->keyup_jiffies);
}
- spin_unlock_irqrestore(&ir->keylock, flags);
+ spin_unlock_irqrestore(&dev->keylock, flags);
}
EXPORT_SYMBOL_GPL(ir_keydown);
/**
* ir_keydown_notimeout() - generates input event for a key press without
* an automatic keyup event at a later time
- * @dev: the struct input_dev descriptor of the device
+ * @dev: the struct rc_dev descriptor of the device
* @scancode: the scancode that we're seeking
* @toggle: the toggle value (protocol dependent, if the protocol doesn't
* support toggle values, this should be set to zero)
*
- * This routine is used by the input routines when a key is pressed at the
- * IR. It gets the keycode for a scancode and reports an input event via
- * input_report_key(). The driver must manually call ir_keyup() at a later
- * stage.
+ * This routine is used to signal that a key has been pressed on the
+ * remote control. The driver must manually call ir_keyup() at a later stage.
*/
-void ir_keydown_notimeout(struct input_dev *dev, int scancode, u8 toggle)
+void ir_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle)
{
unsigned long flags;
- struct ir_input_dev *ir = input_get_drvdata(dev);
u32 keycode = ir_g_keycode_from_table(dev, scancode);
- spin_lock_irqsave(&ir->keylock, flags);
+ spin_lock_irqsave(&dev->keylock, flags);
ir_do_keydown(dev, scancode, keycode, toggle);
- spin_unlock_irqrestore(&ir->keylock, flags);
+ spin_unlock_irqrestore(&dev->keylock, flags);
}
EXPORT_SYMBOL_GPL(ir_keydown_notimeout);
-static int ir_open(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
- return ir_dev->props->open(ir_dev->props->priv);
-}
-
-static void ir_close(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
- ir_dev->props->close(ir_dev->props->priv);
-}
-
-/**
- * __ir_input_register() - sets the IR keycode table and add the handlers
- * for keymap table get/set
- * @input_dev: the struct input_dev descriptor of the device
- * @rc_tab: the struct ir_scancode_table table of scancode/keymap
- *
- * This routine is used to initialize the input infrastructure
- * to work with an IR.
- * It will register the input/evdev interface for the device and
- * register the syfs code for IR class
- */
-int __ir_input_register(struct input_dev *input_dev,
- const struct ir_scancode_table *rc_tab,
- struct ir_dev_props *props,
- const char *driver_name)
+static int ir_open(struct input_dev *idev)
{
- struct ir_input_dev *ir_dev;
- int rc;
-
- if (rc_tab->scan == NULL || !rc_tab->size)
- return -EINVAL;
-
- ir_dev = kzalloc(sizeof(*ir_dev), GFP_KERNEL);
- if (!ir_dev)
- return -ENOMEM;
-
- ir_dev->driver_name = kasprintf(GFP_KERNEL, "%s", driver_name);
- if (!ir_dev->driver_name) {
- rc = -ENOMEM;
- goto out_dev;
- }
-
- input_dev->getkeycode_new = ir_getkeycode;
- input_dev->setkeycode_new = ir_setkeycode;
- input_set_drvdata(input_dev, ir_dev);
- ir_dev->input_dev = input_dev;
-
- spin_lock_init(&ir_dev->rc_tab.lock);
- spin_lock_init(&ir_dev->keylock);
- setup_timer(&ir_dev->timer_keyup, ir_timer_keyup, (unsigned long)ir_dev);
-
- if (props) {
- ir_dev->props = props;
- if (props->open)
- input_dev->open = ir_open;
- if (props->close)
- input_dev->close = ir_close;
- }
-
- set_bit(EV_KEY, input_dev->evbit);
- set_bit(EV_REP, input_dev->evbit);
- set_bit(EV_MSC, input_dev->evbit);
- set_bit(MSC_SCAN, input_dev->mscbit);
-
- rc = ir_setkeytable(ir_dev, rc_tab);
- if (rc)
- goto out_name;
+ struct rc_dev *rdev = input_get_drvdata(idev);
- rc = ir_register_class(input_dev);
- if (rc < 0)
- goto out_table;
-
- if (ir_dev->props)
- if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
- rc = ir_raw_event_register(input_dev);
- if (rc < 0)
- goto out_event;
- }
-
- rc = ir_register_input(input_dev);
- if (rc < 0)
- goto out_event;
-
- IR_dprintk(1, "Registered input device on %s for %s remote%s.\n",
- driver_name, rc_tab->name,
- (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
- " in raw mode" : "");
-
- /*
- * Default delay of 250ms is too short for some protocols, expecially
- * since the timeout is currently set to 250ms. Increase it to 500ms,
- * to avoid wrong repetition of the keycodes.
- */
- input_dev->rep[REP_DELAY] = 500;
-
- return 0;
-
-out_event:
- ir_unregister_class(input_dev);
-out_table:
- ir_free_table(&ir_dev->rc_tab);
-out_name:
- kfree(ir_dev->driver_name);
-out_dev:
- kfree(ir_dev);
- return rc;
+ return rdev->open(rdev);
}
-EXPORT_SYMBOL_GPL(__ir_input_register);
-
-/**
- * ir_input_unregister() - unregisters IR and frees resources
- * @input_dev: the struct input_dev descriptor of the device
- * This routine is used to free memory and de-register interfaces.
- */
-void ir_input_unregister(struct input_dev *input_dev)
+static void ir_close(struct input_dev *idev)
{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
- if (!ir_dev)
- return;
-
- IR_dprintk(1, "Freed keycode table\n");
+ struct rc_dev *rdev = input_get_drvdata(idev);
- del_timer_sync(&ir_dev->timer_keyup);
- if (ir_dev->props)
- if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
- ir_raw_event_unregister(input_dev);
-
- ir_free_table(&ir_dev->rc_tab);
-
- ir_unregister_class(input_dev);
-
- kfree(ir_dev->driver_name);
- kfree(ir_dev);
+ rdev->close(rdev);
}
-EXPORT_SYMBOL_GPL(ir_input_unregister);
/* class for /sys/class/rc */
static char *ir_devnode(struct device *dev, mode_t *mode)
@@ -879,7 +731,7 @@ static struct {
/**
* show_protocols() - shows the current IR protocol(s)
- * @d: the device descriptor
+ * @device: the device descriptor
* @mattr: the device attribute struct (unused)
* @buf: a pointer to the output buffer
*
@@ -888,26 +740,25 @@ static struct {
* It returns the protocol names of supported protocols.
* Enabled protocols are printed in brackets.
*/
-static ssize_t show_protocols(struct device *d,
+static ssize_t show_protocols(struct device *device,
struct device_attribute *mattr, char *buf)
{
- struct ir_input_dev *ir_dev = dev_get_drvdata(d);
+ struct rc_dev *dev = to_rc_dev(device);
u64 allowed, enabled;
char *tmp = buf;
int i;
/* Device is being removed */
- if (!ir_dev)
+ if (!dev)
return -EINVAL;
- if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
- enabled = ir_dev->rc_tab.ir_type;
- allowed = ir_dev->props->allowed_protos;
- } else if (ir_dev->raw) {
- enabled = ir_dev->raw->enabled_protocols;
+ if (dev->driver_type == RC_DRIVER_SCANCODE) {
+ enabled = dev->rc_tab.ir_type;
+ allowed = dev->allowed_protos;
+ } else {
+ enabled = dev->raw->enabled_protocols;
allowed = ir_raw_get_allowed_protocols();
- } else
- return sprintf(tmp, "[builtin]\n");
+ }
IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
(long long)allowed,
@@ -928,12 +779,12 @@ static ssize_t show_protocols(struct device *d,
/**
* store_protocols() - changes the current IR protocol(s)
- * @d: the device descriptor
+ * @device: the device descriptor
* @mattr: the device attribute struct (unused)
* @buf: a pointer to the input buffer
* @len: length of the input buffer
*
- * This routine is a callback routine for changing the IR protocol type.
+ * This routine is for changing the IR protocol type.
* It is trigged by writing to /sys/class/rc/rc?/protocols.
* Writing "+proto" will add a protocol to the list of enabled protocols.
* Writing "-proto" will remove a protocol from the list of enabled protocols.
@@ -942,12 +793,12 @@ static ssize_t show_protocols(struct device *d,
* Returns -EINVAL if an invalid protocol combination or unknown protocol name
* is used, otherwise @len.
*/
-static ssize_t store_protocols(struct device *d,
+static ssize_t store_protocols(struct device *device,
struct device_attribute *mattr,
const char *data,
size_t len)
{
- struct ir_input_dev *ir_dev = dev_get_drvdata(d);
+ struct rc_dev *dev = to_rc_dev(device);
bool enable, disable;
const char *tmp;
u64 type;
@@ -956,13 +807,13 @@ static ssize_t store_protocols(struct device *d,
unsigned long flags;
/* Device is being removed */
- if (!ir_dev)
+ if (!dev)
return -EINVAL;
- if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
- type = ir_dev->rc_tab.ir_type;
- else if (ir_dev->raw)
- type = ir_dev->raw->enabled_protocols;
+ if (dev->driver_type == RC_DRIVER_SCANCODE)
+ type = dev->rc_tab.ir_type;
+ else if (dev->raw)
+ type = dev->raw->enabled_protocols;
else {
IR_dprintk(1, "Protocol switching not supported\n");
return -EINVAL;
@@ -1017,9 +868,8 @@ static ssize_t store_protocols(struct device *d,
return -EINVAL;
}
- if (ir_dev->props && ir_dev->props->change_protocol) {
- rc = ir_dev->props->change_protocol(ir_dev->props->priv,
- type);
+ if (dev->change_protocol) {
+ rc = dev->change_protocol(dev, type);
if (rc < 0) {
IR_dprintk(1, "Error setting protocols to 0x%llx\n",
(long long)type);
@@ -1027,12 +877,12 @@ static ssize_t store_protocols(struct device *d,
}
}
- if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
- spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
- ir_dev->rc_tab.ir_type = type;
- spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
+ if (dev->driver_type == RC_DRIVER_SCANCODE) {
+ spin_lock_irqsave(&dev->rc_tab.lock, flags);
+ dev->rc_tab.ir_type = type;
+ spin_unlock_irqrestore(&dev->rc_tab.lock, flags);
} else {
- ir_dev->raw->enabled_protocols = type;
+ dev->raw->enabled_protocols = type;
}
IR_dprintk(1, "Current protocol(s): 0x%llx\n",
@@ -1041,6 +891,14 @@ static ssize_t store_protocols(struct device *d,
return len;
}
+static void rc_dev_release(struct device *device)
+{
+ struct rc_dev *dev = to_rc_dev(device);
+
+ kfree(dev);
+ module_put(THIS_MODULE);
+}
+
#define ADD_HOTPLUG_VAR(fmt, val...) \
do { \
int err = add_uevent_var(env, fmt, val); \
@@ -1050,12 +908,12 @@ static ssize_t store_protocols(struct device *d,
static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
{
- struct ir_input_dev *ir_dev = dev_get_drvdata(device);
+ struct rc_dev *dev = to_rc_dev(device);
- if (ir_dev->rc_tab.name)
- ADD_HOTPLUG_VAR("NAME=%s", ir_dev->rc_tab.name);
- if (ir_dev->driver_name)
- ADD_HOTPLUG_VAR("DRV_NAME=%s", ir_dev->driver_name);
+ if (dev->rc_tab.name)
+ ADD_HOTPLUG_VAR("NAME=%s", dev->rc_tab.name);
+ if (dev->driver_name)
+ ADD_HOTPLUG_VAR("DRV_NAME=%s", dev->driver_name);
return 0;
}
@@ -1082,84 +940,162 @@ static const struct attribute_group *rc_dev_attr_groups[] = {
static struct device_type rc_dev_type = {
.groups = rc_dev_attr_groups,
+ .release = rc_dev_release,
.uevent = rc_dev_uevent,
};
-/**
- * ir_register_class() - creates the sysfs for /sys/class/rc/rc?
- * @input_dev: the struct input_dev descriptor of the device
- *
- * This routine is used to register the syfs code for IR class
- */
-static int ir_register_class(struct input_dev *input_dev)
+struct rc_dev *rc_allocate_device(void)
{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- int devno = find_first_zero_bit(&ir_core_dev_number,
- IRRCV_NUM_DEVICES);
-
- if (unlikely(devno < 0))
- return devno;
-
- ir_dev->dev.type = &rc_dev_type;
- ir_dev->devno = devno;
-
- ir_dev->dev.class = &ir_input_class;
- ir_dev->dev.parent = input_dev->dev.parent;
- input_dev->dev.parent = &ir_dev->dev;
- dev_set_name(&ir_dev->dev, "rc%d", devno);
- dev_set_drvdata(&ir_dev->dev, ir_dev);
- return device_register(&ir_dev->dev);
-};
+ struct rc_dev *dev;
-/**
- * ir_register_input - registers ir input device with input subsystem
- * @input_dev: the struct input_dev descriptor of the device
- */
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ dev->input_dev = input_allocate_device();
+ if (!dev->input_dev) {
+ kfree(dev);
+ return NULL;
+ }
+
+ dev->input_dev->getkeycode_new = ir_getkeycode;
+ dev->input_dev->setkeycode_new = ir_setkeycode;
+ input_set_drvdata(dev->input_dev, dev);
+
+ spin_lock_init(&dev->rc_tab.lock);
+ spin_lock_init(&dev->keylock);
+ setup_timer(&dev->timer_keyup, ir_timer_keyup, (unsigned long)dev);
-static int ir_register_input(struct input_dev *input_dev)
+ dev->dev.type = &rc_dev_type;
+ dev->dev.class = &ir_input_class;
+ device_initialize(&dev->dev);
+
+ __module_get(THIS_MODULE);
+ return dev;
+}
+EXPORT_SYMBOL_GPL(rc_allocate_device);
+
+void rc_free_device(struct rc_dev *dev)
{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- int rc;
+ if (dev) {
+ input_free_device(dev->input_dev);
+ put_device(&dev->dev);
+ }
+}
+EXPORT_SYMBOL_GPL(rc_free_device);
+
+int rc_register_device(struct rc_dev *dev)
+{
+ static atomic_t devno = ATOMIC_INIT(0);
+ struct ir_scancode_table *rc_tab;
const char *path;
+ int rc;
+ if (!dev || !dev->map_name)
+ return -EINVAL;
- rc = input_register_device(input_dev);
- if (rc < 0) {
- device_del(&ir_dev->dev);
+ rc_tab = get_rc_map(dev->map_name);
+ if (!rc_tab)
+ rc_tab = get_rc_map(RC_MAP_EMPTY);
+ if (!rc_tab || !rc_tab->scan || rc_tab->size == 0)
+ return -EINVAL;
+
+ set_bit(EV_KEY, dev->input_dev->evbit);
+ set_bit(EV_REP, dev->input_dev->evbit);
+ set_bit(EV_MSC, dev->input_dev->evbit);
+ set_bit(MSC_SCAN, dev->input_dev->mscbit);
+ if (dev->open)
+ dev->input_dev->open = ir_open;
+ if (dev->close)
+ dev->input_dev->close = ir_close;
+
+ dev->devno = (unsigned long)(atomic_inc_return(&devno) - 1);
+ dev_set_name(&dev->dev, "rc%ld", dev->devno);
+ dev_set_drvdata(&dev->dev, dev);
+ rc = device_add(&dev->dev);
+ if (rc)
return rc;
- }
- __module_get(THIS_MODULE);
+ rc = ir_setkeytable(dev, rc_tab);
+ if (rc)
+ goto out_dev;
+
+ dev->input_dev->dev.parent = &dev->dev;
+ memcpy(&dev->input_dev->id, &dev->input_id, sizeof(dev->input_id));
+ dev->input_dev->phys = dev->input_phys;
+ dev->input_dev->name = dev->input_name;
+ rc = input_register_device(dev->input_dev);
+ if (rc)
+ goto out_table;
- path = kobject_get_path(&ir_dev->dev.kobj, GFP_KERNEL);
+ /*
+ * Default delay of 250ms is too short for some protocols, expecially
+ * since the timeout is currently set to 250ms. Increase it to 500ms,
+ * to avoid wrong repetition of the keycodes. Note that this must be
+ * set after the call to input_register_device().
+ */
+ dev->input_dev->rep[REP_DELAY] = 500;
+
+ path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL);
printk(KERN_INFO "%s: %s as %s\n",
- dev_name(&ir_dev->dev),
- input_dev->name ? input_dev->name : "Unspecified device",
+ dev_name(&dev->dev),
+ dev->input_name ? dev->input_name : "Unspecified device",
path ? path : "N/A");
kfree(path);
- set_bit(ir_dev->devno, &ir_core_dev_number);
+ if (dev->driver_type == RC_DRIVER_IR_RAW) {
+ rc = ir_raw_event_register(dev);
+ if (rc < 0)
+ goto out_input;
+ }
+
+ if (dev->change_protocol) {
+ rc = dev->change_protocol(dev, rc_tab->ir_type);
+ if (rc < 0)
+ goto out_raw;
+ }
+
+ IR_dprintk(1, "Registered rc%ld (driver: %s, remote: %s, mode %s)\n",
+ dev->devno,
+ dev->driver_name ? dev->driver_name : "unknown",
+ rc_tab->name ? rc_tab->name : "unknown",
+ dev->driver_type == RC_DRIVER_IR_RAW ? "raw" : "cooked");
+
return 0;
+
+out_raw:
+ if (dev->driver_type == RC_DRIVER_IR_RAW)
+ ir_raw_event_unregister(dev);
+out_input:
+ input_unregister_device(dev->input_dev);
+ dev->input_dev = NULL;
+out_table:
+ ir_free_table(&dev->rc_tab);
+out_dev:
+ device_del(&dev->dev);
+ return rc;
}
+EXPORT_SYMBOL_GPL(rc_register_device);
-/**
- * ir_unregister_class() - removes the sysfs for sysfs for
- * /sys/class/rc/rc?
- * @input_dev: the struct input_dev descriptor of the device
- *
- * This routine is used to unregister the syfs code for IR class
- */
-static void ir_unregister_class(struct input_dev *input_dev)
+void rc_unregister_device(struct rc_dev *dev)
{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ if (!dev)
+ return;
- input_set_drvdata(input_dev, NULL);
- clear_bit(ir_dev->devno, &ir_core_dev_number);
- input_unregister_device(input_dev);
- device_del(&ir_dev->dev);
+ del_timer_sync(&dev->timer_keyup);
- module_put(THIS_MODULE);
+ if (dev->driver_type == RC_DRIVER_IR_RAW)
+ ir_raw_event_unregister(dev);
+
+ input_unregister_device(dev->input_dev);
+ dev->input_dev = NULL;
+
+ ir_free_table(&dev->rc_tab);
+ IR_dprintk(1, "Freed keycode table\n");
+
+ device_unregister(&dev->dev);
}
+EXPORT_SYMBOL_GPL(rc_unregister_device);
/*
* Init/exit code for the module. Basically, creates/removes /sys/class/rc
diff --git a/drivers/media/IR/rc-raw.c b/drivers/media/IR/rc-raw.c
index a06a07e..d0fe312 100644
--- a/drivers/media/IR/rc-raw.c
+++ b/drivers/media/IR/rc-raw.c
@@ -64,7 +64,7 @@ static int ir_raw_event_thread(void *data)
mutex_lock(&ir_raw_handler_lock);
list_for_each_entry(handler, &ir_raw_handler_list, list)
- handler->decode(raw->input_dev, ev);
+ handler->decode(raw->dev, ev);
raw->prev_ev = ev;
mutex_unlock(&ir_raw_handler_lock);
}
@@ -74,7 +74,7 @@ static int ir_raw_event_thread(void *data)
/**
* ir_raw_event_store() - pass a pulse/space duration to the raw ir decoders
- * @input_dev: the struct input_dev device descriptor
+ * @dev: the struct rc_dev device descriptor
* @ev: the struct ir_raw_event descriptor of the pulse/space
*
* This routine (which may be called from an interrupt context) stores a
@@ -82,17 +82,15 @@ static int ir_raw_event_thread(void *data)
* signalled as positive values and spaces as negative values. A zero value
* will reset the decoding state machines.
*/
-int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev)
+int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev)
{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
-
- if (!ir->raw)
+ if (!dev->raw)
return -EINVAL;
IR_dprintk(2, "sample: (%05dus %s)\n",
- TO_US(ev->duration), TO_STR(ev->pulse));
+ TO_US(ev->duration), TO_STR(ev->pulse));
- if (kfifo_in(&ir->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
+ if (kfifo_in(&dev->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
return -ENOMEM;
return 0;
@@ -101,7 +99,7 @@ EXPORT_SYMBOL_GPL(ir_raw_event_store);
/**
* ir_raw_event_store_edge() - notify raw ir decoders of the start of a pulse/space
- * @input_dev: the struct input_dev device descriptor
+ * @dev: the struct rc_dev device descriptor
* @type: the type of the event that has occurred
*
* This routine (which may be called from an interrupt context) is used to
@@ -110,50 +108,49 @@ EXPORT_SYMBOL_GPL(ir_raw_event_store);
* hardware which does not provide durations directly but only interrupts
* (or similar events) on state change.
*/
-int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type)
+int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type)
{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
ktime_t now;
s64 delta; /* ns */
struct ir_raw_event ev;
int rc = 0;
- if (!ir->raw)
+ if (!dev->raw)
return -EINVAL;
now = ktime_get();
- delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
+ delta = ktime_to_ns(ktime_sub(now, dev->raw->last_event));
/* Check for a long duration since last event or if we're
* being called for the first time, note that delta can't
* possibly be negative.
*/
ev.duration = 0;
- if (delta > IR_MAX_DURATION || !ir->raw->last_type)
+ if (delta > IR_MAX_DURATION || !dev->raw->last_type)
type |= IR_START_EVENT;
else
ev.duration = delta;
if (type & IR_START_EVENT)
- ir_raw_event_reset(input_dev);
- else if (ir->raw->last_type & IR_SPACE) {
+ ir_raw_event_reset(dev);
+ else if (dev->raw->last_type & IR_SPACE) {
ev.pulse = false;
- rc = ir_raw_event_store(input_dev, &ev);
- } else if (ir->raw->last_type & IR_PULSE) {
+ rc = ir_raw_event_store(dev, &ev);
+ } else if (dev->raw->last_type & IR_PULSE) {
ev.pulse = true;
- rc = ir_raw_event_store(input_dev, &ev);
+ rc = ir_raw_event_store(dev, &ev);
} else
return 0;
- ir->raw->last_event = now;
- ir->raw->last_type = type;
+ dev->raw->last_event = now;
+ dev->raw->last_type = type;
return rc;
}
EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
/**
* ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
- * @input_dev: the struct input_dev device descriptor
+ * @dev: the struct rc_dev device descriptor
* @type: the type of the event that has occurred
*
* This routine (which may be called from an interrupt context) works
@@ -161,84 +158,76 @@ EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
* This routine is intended for devices with limited internal buffer
* It automerges samples of same type, and handles timeouts
*/
-int ir_raw_event_store_with_filter(struct input_dev *input_dev,
- struct ir_raw_event *ev)
+int ir_raw_event_store_with_filter(struct rc_dev *dev, struct ir_raw_event *ev)
{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
- struct ir_raw_event_ctrl *raw = ir->raw;
-
- if (!raw || !ir->props)
+ if (!dev->raw)
return -EINVAL;
/* Ignore spaces in idle mode */
- if (ir->idle && !ev->pulse)
+ if (dev->idle && !ev->pulse)
return 0;
- else if (ir->idle)
- ir_raw_event_set_idle(input_dev, false);
-
- if (!raw->this_ev.duration) {
- raw->this_ev = *ev;
- } else if (ev->pulse == raw->this_ev.pulse) {
- raw->this_ev.duration += ev->duration;
- } else {
- ir_raw_event_store(input_dev, &raw->this_ev);
- raw->this_ev = *ev;
+ else if (dev->idle)
+ ir_raw_event_set_idle(dev, false);
+
+ if (!dev->raw->this_ev.duration)
+ dev->raw->this_ev = *ev;
+ else if (ev->pulse == dev->raw->this_ev.pulse)
+ dev->raw->this_ev.duration += ev->duration;
+ else {
+ ir_raw_event_store(dev, &dev->raw->this_ev);
+ dev->raw->this_ev = *ev;
}
/* Enter idle mode if nessesary */
- if (!ev->pulse && ir->props->timeout &&
- raw->this_ev.duration >= ir->props->timeout) {
- ir_raw_event_set_idle(input_dev, true);
- }
+ if (!ev->pulse && dev->timeout &&
+ dev->raw->this_ev.duration >= dev->timeout)
+ ir_raw_event_set_idle(dev, true);
+
return 0;
}
EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
/**
- * ir_raw_event_set_idle() - hint the ir core if device is receiving
- * IR data or not
- * @input_dev: the struct input_dev device descriptor
- * @idle: the hint value
+ * ir_raw_event_set_idle() - provide hint to rc-core when the device is idle or not
+ * @dev: the struct rc_dev device descriptor
+ * @idle: whether the device is idle or not
*/
-void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle)
+void ir_raw_event_set_idle(struct rc_dev *dev, bool idle)
{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
- struct ir_raw_event_ctrl *raw = ir->raw;
-
- if (!ir->props || !ir->raw)
+ if (!dev->raw)
return;
IR_dprintk(2, "%s idle mode\n", idle ? "enter" : "leave");
if (idle) {
- raw->this_ev.timeout = true;
- ir_raw_event_store(input_dev, &raw->this_ev);
- init_ir_raw_event(&raw->this_ev);
+ dev->raw->this_ev.timeout = true;
+ ir_raw_event_store(dev, &dev->raw->this_ev);
+ init_ir_raw_event(&dev->raw->this_ev);
}
- if (ir->props->s_idle)
- ir->props->s_idle(ir->props->priv, idle);
- ir->idle = idle;
+ if (dev->s_idle)
+ dev->s_idle(dev, idle);
+
+ dev->idle = idle;
}
EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
/**
* ir_raw_event_handle() - schedules the decoding of stored ir data
- * @input_dev: the struct input_dev device descriptor
+ * @dev: the struct rc_dev device descriptor
*
- * This routine will signal the workqueue to start decoding stored ir data.
+ * This routine will tell rc-core to start decoding stored ir data.
*/
-void ir_raw_event_handle(struct input_dev *input_dev)
+void ir_raw_event_handle(struct rc_dev *dev)
{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
unsigned long flags;
- if (!ir->raw)
+ if (!dev->raw)
return;
- spin_lock_irqsave(&ir->raw->lock, flags);
- wake_up_process(ir->raw->thread);
- spin_unlock_irqrestore(&ir->raw->lock, flags);
+ spin_lock_irqsave(&dev->raw->lock, flags);
+ wake_up_process(dev->raw->thread);
+ spin_unlock_irqrestore(&dev->raw->lock, flags);
}
EXPORT_SYMBOL_GPL(ir_raw_event_handle);
@@ -256,69 +245,69 @@ ir_raw_get_allowed_protocols()
/*
* Used to (un)register raw event clients
*/
-int ir_raw_event_register(struct input_dev *input_dev)
+int ir_raw_event_register(struct rc_dev *dev)
{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
int rc;
struct ir_raw_handler *handler;
- ir->raw = kzalloc(sizeof(*ir->raw), GFP_KERNEL);
- if (!ir->raw)
- return -ENOMEM;
+ if (!dev)
+ return -EINVAL;
- ir->raw->input_dev = input_dev;
+ dev->raw = kzalloc(sizeof(*dev->raw), GFP_KERNEL);
+ if (!dev->raw)
+ return -ENOMEM;
- ir->raw->enabled_protocols = ~0;
- rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE,
+ dev->raw->dev = dev;
+ dev->raw->enabled_protocols = ~0;
+ rc = kfifo_alloc(&dev->raw->kfifo,
+ sizeof(struct ir_raw_event) * MAX_IR_EVENT_SIZE,
GFP_KERNEL);
- if (rc < 0) {
- kfree(ir->raw);
- ir->raw = NULL;
- return rc;
- }
+ if (rc < 0)
+ goto out;
- spin_lock_init(&ir->raw->lock);
- ir->raw->thread = kthread_run(ir_raw_event_thread, ir->raw,
- "rc%u", (unsigned int)ir->devno);
+ spin_lock_init(&dev->raw->lock);
+ dev->raw->thread = kthread_run(ir_raw_event_thread, dev->raw,
+ "rc%ld", dev->devno);
- if (IS_ERR(ir->raw->thread)) {
- int ret = PTR_ERR(ir->raw->thread);
-
- kfree(ir->raw);
- ir->raw = NULL;
- return ret;
+ if (IS_ERR(dev->raw->thread)) {
+ rc = PTR_ERR(dev->raw->thread);
+ goto out;
}
mutex_lock(&ir_raw_handler_lock);
- list_add_tail(&ir->raw->list, &ir_raw_client_list);
+ list_add_tail(&dev->raw->list, &ir_raw_client_list);
list_for_each_entry(handler, &ir_raw_handler_list, list)
if (handler->raw_register)
- handler->raw_register(ir->raw->input_dev);
+ handler->raw_register(dev);
mutex_unlock(&ir_raw_handler_lock);
return 0;
+
+out:
+ kfree(dev->raw);
+ dev->raw = NULL;
+ return rc;
}
-void ir_raw_event_unregister(struct input_dev *input_dev)
+void ir_raw_event_unregister(struct rc_dev *dev)
{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
struct ir_raw_handler *handler;
- if (!ir->raw)
+ if (!dev || !dev->raw)
return;
- kthread_stop(ir->raw->thread);
+ kthread_stop(dev->raw->thread);
mutex_lock(&ir_raw_handler_lock);
- list_del(&ir->raw->list);
+ list_del(&dev->raw->list);
list_for_each_entry(handler, &ir_raw_handler_list, list)
if (handler->raw_unregister)
- handler->raw_unregister(ir->raw->input_dev);
+ handler->raw_unregister(dev);
mutex_unlock(&ir_raw_handler_lock);
- kfifo_free(&ir->raw->kfifo);
- kfree(ir->raw);
- ir->raw = NULL;
+ kfifo_free(&dev->raw->kfifo);
+ kfree(dev->raw);
+ dev->raw = NULL;
}
/*
@@ -333,7 +322,7 @@ int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler)
list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
if (ir_raw_handler->raw_register)
list_for_each_entry(raw, &ir_raw_client_list, list)
- ir_raw_handler->raw_register(raw->input_dev);
+ ir_raw_handler->raw_register(raw->dev);
available_protocols |= ir_raw_handler->protocols;
mutex_unlock(&ir_raw_handler_lock);
@@ -349,7 +338,7 @@ void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler)
list_del(&ir_raw_handler->list);
if (ir_raw_handler->raw_unregister)
list_for_each_entry(raw, &ir_raw_client_list, list)
- ir_raw_handler->raw_unregister(raw->input_dev);
+ ir_raw_handler->raw_unregister(raw->dev);
available_protocols &= ~ir_raw_handler->protocols;
mutex_unlock(&ir_raw_handler_lock);
}
diff --git a/drivers/media/IR/streamzap.c b/drivers/media/IR/streamzap.c
index 548381c..7781910 100644
--- a/drivers/media/IR/streamzap.c
+++ b/drivers/media/IR/streamzap.c
@@ -35,7 +35,6 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/usb.h>
-#include <linux/input.h>
#include <media/ir-core.h>
#define DRIVER_VERSION "1.61"
@@ -85,13 +84,11 @@ enum StreamzapDecoderState {
/* structure to hold our device specific stuff */
struct streamzap_ir {
-
/* ir-core */
- struct ir_dev_props *props;
+ struct rc_dev *rdev;
/* core device info */
struct device *dev;
- struct input_dev *idev;
/* usb */
struct usb_device *usbdev;
@@ -140,7 +137,7 @@ static struct usb_driver streamzap_driver = {
static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir)
{
- ir_raw_event_store(sz->idev, &rawir);
+ ir_raw_event_store(sz->rdev, &rawir);
}
static void sz_push_full_pulse(struct streamzap_ir *sz,
@@ -277,7 +274,7 @@ static void streamzap_callback(struct urb *urb)
sz->idle = true;
if (sz->timeout_enabled)
sz_push(sz, rawir);
- ir_raw_event_handle(sz->idev);
+ ir_raw_event_handle(sz->rdev);
} else {
sz_push_full_space(sz, sz->buf_in[i]);
}
@@ -300,54 +297,43 @@ static void streamzap_callback(struct urb *urb)
return;
}
-static struct input_dev *streamzap_init_input_dev(struct streamzap_ir *sz)
+static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz)
{
- struct input_dev *idev;
- struct ir_dev_props *props;
+ struct rc_dev *rdev;
struct device *dev = sz->dev;
int ret;
- idev = input_allocate_device();
- if (!idev) {
- dev_err(dev, "remote input dev allocation failed\n");
- goto idev_alloc_failed;
- }
-
- props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
- if (!props) {
- dev_err(dev, "remote ir dev props allocation failed\n");
- goto props_alloc_failed;
+ rdev = rc_allocate_device();
+ if (!rdev) {
+ dev_err(dev, "remote dev allocation failed\n");
+ goto out;
}
snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
"Receiver (%04x:%04x)",
le16_to_cpu(sz->usbdev->descriptor.idVendor),
le16_to_cpu(sz->usbdev->descriptor.idProduct));
-
- idev->name = sz->name;
usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
strlcat(sz->phys, "/input0", sizeof(sz->phys));
- idev->phys = sz->phys;
-
- props->priv = sz;
- props->driver_type = RC_DRIVER_IR_RAW;
- props->allowed_protos = IR_TYPE_ALL;
- sz->props = props;
+ rdev->input_name = sz->name;
+ rdev->input_phys = sz->phys;
+ rdev->priv = sz;
+ rdev->driver_type = RC_DRIVER_IR_RAW;
+ rdev->allowed_protos = IR_TYPE_ALL;
+ rdev->driver_name = DRIVER_NAME;
+ rdev->map_name = RC_MAP_STREAMZAP;
- ret = ir_input_register(idev, RC_MAP_STREAMZAP, props, DRIVER_NAME);
+ ret = rc_register_device(rdev);
if (ret < 0) {
dev_err(dev, "remote input device register failed\n");
- goto irdev_failed;
+ goto out;
}
- return idev;
+ return rdev;
-irdev_failed:
- kfree(props);
-props_alloc_failed:
- input_free_device(idev);
-idev_alloc_failed:
+out:
+ rc_free_device(rdev);
return NULL;
}
@@ -436,9 +422,9 @@ static int __devinit streamzap_probe(struct usb_interface *intf,
snprintf(name + strlen(name), sizeof(name) - strlen(name),
" %s", buf);
- sz->idev = streamzap_init_input_dev(sz);
- if (!sz->idev)
- goto input_dev_fail;
+ sz->rdev = streamzap_init_rc_dev(sz);
+ if (!sz->rdev)
+ goto rc_dev_fail;
sz->idle = true;
sz->decoder_state = PulseSpace;
@@ -473,7 +459,7 @@ static int __devinit streamzap_probe(struct usb_interface *intf,
return 0;
-input_dev_fail:
+rc_dev_fail:
usb_free_urb(sz->urb_in);
free_buf_in:
usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
@@ -504,7 +490,7 @@ static void streamzap_disconnect(struct usb_interface *interface)
return;
sz->usbdev = NULL;
- ir_input_unregister(sz->idev);
+ rc_unregister_device(sz->rdev);
usb_kill_urb(sz->urb_in);
usb_free_urb(sz->urb_in);
usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);
diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c
index 5d404f1..d1a4385 100644
--- a/drivers/media/dvb/dm1105/dm1105.c
+++ b/drivers/media/dvb/dm1105/dm1105.c
@@ -26,7 +26,6 @@
#include <linux/proc_fs.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
-#include <linux/input.h>
#include <linux/slab.h>
#include <media/ir-core.h>
@@ -266,7 +265,7 @@ static void dm1105_card_list(struct pci_dev *pci)
/* infrared remote control */
struct infrared {
- struct input_dev *input_dev;
+ struct rc_dev *dev;
char input_phys[32];
struct work_struct work;
u32 ir_command;
@@ -532,7 +531,7 @@ static void dm1105_emit_key(struct work_struct *work)
data = (ircom >> 8) & 0x7f;
- ir_keydown(ir->input_dev, data, 0);
+ ir_keydown(ir->dev, data, 0);
}
/* work handler */
@@ -593,46 +592,47 @@ static irqreturn_t dm1105_irq(int irq, void *dev_id)
int __devinit dm1105_ir_init(struct dm1105_dev *dm1105)
{
- struct input_dev *input_dev;
- char *ir_codes = RC_MAP_DM1105_NEC;
+ struct rc_dev *dev;
int err = -ENOMEM;
- input_dev = input_allocate_device();
- if (!input_dev)
+ dev = rc_allocate_device();
+ if (!dev)
return -ENOMEM;
- dm1105->ir.input_dev = input_dev;
snprintf(dm1105->ir.input_phys, sizeof(dm1105->ir.input_phys),
"pci-%s/ir0", pci_name(dm1105->pdev));
- input_dev->name = "DVB on-card IR receiver";
- input_dev->phys = dm1105->ir.input_phys;
- input_dev->id.bustype = BUS_PCI;
- input_dev->id.version = 1;
+ dev->driver_name = MODULE_NAME;
+ dev->map_name = RC_MAP_DM1105_NEC;
+ dev->driver_type = RC_DRIVER_SCANCODE;
+ dev->input_name = "DVB on-card IR receiver";
+ dev->input_phys = dm1105->ir.input_phys;
+ dev->input_id.bustype = BUS_PCI;
+ dev->input_id.version = 1;
if (dm1105->pdev->subsystem_vendor) {
- input_dev->id.vendor = dm1105->pdev->subsystem_vendor;
- input_dev->id.product = dm1105->pdev->subsystem_device;
+ dev->input_id.vendor = dm1105->pdev->subsystem_vendor;
+ dev->input_id.product = dm1105->pdev->subsystem_device;
} else {
- input_dev->id.vendor = dm1105->pdev->vendor;
- input_dev->id.product = dm1105->pdev->device;
+ dev->input_id.vendor = dm1105->pdev->vendor;
+ dev->input_id.product = dm1105->pdev->device;
}
-
- input_dev->dev.parent = &dm1105->pdev->dev;
+ dev->dev.parent = &dm1105->pdev->dev;
INIT_WORK(&dm1105->ir.work, dm1105_emit_key);
- err = ir_input_register(input_dev, ir_codes, NULL, MODULE_NAME);
+ err = rc_register_device(dev);
if (err < 0) {
- input_free_device(input_dev);
+ rc_free_device(dev);
return err;
}
+ dm1105->ir.dev = dev;
return 0;
}
void __devexit dm1105_ir_exit(struct dm1105_dev *dm1105)
{
- ir_input_unregister(dm1105->ir.input_dev);
+ rc_unregister_device(dm1105->ir.dev);
}
static int __devinit dm1105_hw_init(struct dm1105_dev *dev)
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 31c0a0e..8b9ab30 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -1041,13 +1041,13 @@ static int af9015_rc_query(struct dvb_usb_device *d)
priv->rc_keycode = buf[12] << 16 |
buf[13] << 8 | buf[14];
}
- ir_keydown(d->rc_input_dev, priv->rc_keycode, 0);
+ ir_keydown(d->rc_dev, priv->rc_keycode, 0);
} else {
priv->rc_keycode = 0; /* clear just for sure */
}
} else if (priv->rc_repeat != buf[6] || buf[0]) {
deb_rc("%s: key repeated\n", __func__);
- ir_keydown(d->rc_input_dev, priv->rc_keycode, 0);
+ ir_keydown(d->rc_dev, priv->rc_keycode, 0);
} else {
deb_rc("%s: no key press\n", __func__);
}
@@ -1348,9 +1348,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
.module_name = "af9015",
.rc_query = af9015_rc_query,
.rc_interval = AF9015_RC_INTERVAL,
- .rc_props = {
- .allowed_protos = IR_TYPE_NEC,
- },
+ .allowed_protos = IR_TYPE_NEC,
},
.i2c_algo = &af9015_i2c_algo,
@@ -1478,9 +1476,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
.module_name = "af9015",
.rc_query = af9015_rc_query,
.rc_interval = AF9015_RC_INTERVAL,
- .rc_props = {
- .allowed_protos = IR_TYPE_NEC,
- },
+ .allowed_protos = IR_TYPE_NEC,
},
.i2c_algo = &af9015_i2c_algo,
@@ -1592,9 +1588,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
.module_name = "af9015",
.rc_query = af9015_rc_query,
.rc_interval = AF9015_RC_INTERVAL,
- .rc_props = {
- .allowed_protos = IR_TYPE_NEC,
- },
+ .allowed_protos = IR_TYPE_NEC,
},
.i2c_algo = &af9015_i2c_algo,
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 1759d26..c6e4ba5 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -394,7 +394,7 @@ static int anysee_rc_query(struct dvb_usb_device *d)
if (ircode[0]) {
deb_rc("%s: key pressed %02x\n", __func__, ircode[1]);
- ir_keydown(d->rc_input_dev, 0x08 << 8 | ircode[1], 0);
+ ir_keydown(d->rc_dev, 0x08 << 8 | ircode[1], 0);
}
return 0;
diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h
index c2c9d23..1e7d780 100644
--- a/drivers/media/dvb/dvb-usb/dib0700.h
+++ b/drivers/media/dvb/dvb-usb/dib0700.h
@@ -60,7 +60,7 @@ extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
extern struct i2c_algorithm dib0700_i2c_algo;
extern int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
struct dvb_usb_device_description **desc, int *cold);
-extern int dib0700_change_protocol(void *priv, u64 ir_type);
+extern int dib0700_change_protocol(struct rc_dev *dev, u64 ir_type);
extern int dib0700_device_count;
extern int dvb_usb_dib0700_ir_proto;
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index 48397f1..3b58f45 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -471,9 +471,9 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
return dib0700_ctrl_wr(adap->dev, b, 4);
}
-int dib0700_change_protocol(void *priv, u64 ir_type)
+int dib0700_change_protocol(struct rc_dev *rc, u64 ir_type)
{
- struct dvb_usb_device *d = priv;
+ struct dvb_usb_device *d = rc->priv;
struct dib0700_state *st = d->priv;
u8 rc_setup[3] = { REQUEST_SET_RC, 0, 0 };
int new_proto, ret;
@@ -535,7 +535,7 @@ static void dib0700_rc_urb_completion(struct urb *purb)
if (d == NULL)
return;
- if (d->rc_input_dev == NULL) {
+ if (d->rc_dev == NULL) {
/* This will occur if disable_rc_polling=1 */
usb_free_urb(purb);
return;
@@ -600,7 +600,7 @@ static void dib0700_rc_urb_completion(struct urb *purb)
goto resubmit;
}
- ir_keydown(d->rc_input_dev, keycode, toggle);
+ ir_keydown(d->rc_dev, keycode, toggle);
resubmit:
/* Clean the buffer before we requeue */
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index e06acd1..be167f2 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -520,13 +520,13 @@ static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
d->last_event = keycode;
}
- ir_keydown(d->rc_input_dev, keycode, 0);
+ ir_keydown(d->rc_dev, keycode, 0);
break;
default:
/* RC-5 protocol changes toggle bit on new keypress */
keycode = key[3-2] << 8 | key[3-3];
toggle = key[3-1];
- ir_keydown(d->rc_input_dev, keycode, toggle);
+ ir_keydown(d->rc_dev, keycode, toggle);
break;
}
@@ -1924,12 +1924,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.rc_query = dib0700_rc_query_old_firmware,
- .rc_props = {
- .allowed_protos = IR_TYPE_RC5 |
- IR_TYPE_RC6 |
- IR_TYPE_NEC,
- .change_protocol = dib0700_change_protocol,
- },
+ .allowed_protos = IR_TYPE_RC5 |
+ IR_TYPE_RC6 |
+ IR_TYPE_NEC,
+ .change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -1960,12 +1958,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.rc_query = dib0700_rc_query_old_firmware,
- .rc_props = {
- .allowed_protos = IR_TYPE_RC5 |
- IR_TYPE_RC6 |
- IR_TYPE_NEC,
- .change_protocol = dib0700_change_protocol,
- },
+ .allowed_protos = IR_TYPE_RC5 |
+ IR_TYPE_RC6 |
+ IR_TYPE_NEC,
+ .change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2021,12 +2017,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.rc_query = dib0700_rc_query_old_firmware,
- .rc_props = {
- .allowed_protos = IR_TYPE_RC5 |
- IR_TYPE_RC6 |
- IR_TYPE_NEC,
- .change_protocol = dib0700_change_protocol,
- },
+ .allowed_protos = IR_TYPE_RC5 |
+ IR_TYPE_RC6 |
+ IR_TYPE_NEC,
+ .change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2065,12 +2059,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .rc_props = {
- .allowed_protos = IR_TYPE_RC5 |
- IR_TYPE_RC6 |
- IR_TYPE_NEC,
- .change_protocol = dib0700_change_protocol,
- },
+ .allowed_protos = IR_TYPE_RC5 |
+ IR_TYPE_RC6 |
+ IR_TYPE_NEC,
+ .change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2143,12 +2135,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .rc_props = {
- .allowed_protos = IR_TYPE_RC5 |
- IR_TYPE_RC6 |
- IR_TYPE_NEC,
- .change_protocol = dib0700_change_protocol,
- },
+ .allowed_protos = IR_TYPE_RC5 |
+ IR_TYPE_RC6 |
+ IR_TYPE_NEC,
+ .change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2189,12 +2179,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .rc_props = {
- .allowed_protos = IR_TYPE_RC5 |
- IR_TYPE_RC6 |
- IR_TYPE_NEC,
- .change_protocol = dib0700_change_protocol,
- },
+ .allowed_protos = IR_TYPE_RC5 |
+ IR_TYPE_RC6 |
+ IR_TYPE_NEC,
+ .change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2259,12 +2247,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .rc_props = {
- .allowed_protos = IR_TYPE_RC5 |
- IR_TYPE_RC6 |
- IR_TYPE_NEC,
- .change_protocol = dib0700_change_protocol,
- },
+ .allowed_protos = IR_TYPE_RC5 |
+ IR_TYPE_RC6 |
+ IR_TYPE_NEC,
+ .change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2308,12 +2294,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
.rc_codes = RC_MAP_DIB0700_NEC_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .rc_props = {
- .allowed_protos = IR_TYPE_RC5 |
- IR_TYPE_RC6 |
- IR_TYPE_NEC,
- .change_protocol = dib0700_change_protocol,
- },
+ .allowed_protos = IR_TYPE_RC5 |
+ IR_TYPE_RC6 |
+ IR_TYPE_NEC,
+ .change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2379,12 +2363,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .rc_props = {
- .allowed_protos = IR_TYPE_RC5 |
- IR_TYPE_RC6 |
- IR_TYPE_NEC,
- .change_protocol = dib0700_change_protocol,
- },
+ .allowed_protos = IR_TYPE_RC5 |
+ IR_TYPE_RC6 |
+ IR_TYPE_NEC,
+ .change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 1,
@@ -2417,12 +2399,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .rc_props = {
- .allowed_protos = IR_TYPE_RC5 |
- IR_TYPE_RC6 |
- IR_TYPE_NEC,
- .change_protocol = dib0700_change_protocol,
- },
+ .allowed_protos = IR_TYPE_RC5 |
+ IR_TYPE_RC6 |
+ IR_TYPE_NEC,
+ .change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 1,
@@ -2487,12 +2467,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .rc_props = {
- .allowed_protos = IR_TYPE_RC5 |
- IR_TYPE_RC6 |
- IR_TYPE_NEC,
- .change_protocol = dib0700_change_protocol,
- },
+ .allowed_protos = IR_TYPE_RC5 |
+ IR_TYPE_RC6 |
+ IR_TYPE_NEC,
+ .change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 1,
@@ -2533,12 +2511,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
.rc_codes = RC_MAP_DIB0700_NEC_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .rc_props = {
- .allowed_protos = IR_TYPE_RC5 |
- IR_TYPE_RC6 |
- IR_TYPE_NEC,
- .change_protocol = dib0700_change_protocol,
- },
+ .allowed_protos = IR_TYPE_RC5 |
+ IR_TYPE_RC6 |
+ IR_TYPE_NEC,
+ .change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 2,
@@ -2584,12 +2560,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .rc_props = {
- .allowed_protos = IR_TYPE_RC5 |
- IR_TYPE_RC6 |
- IR_TYPE_NEC,
- .change_protocol = dib0700_change_protocol,
- },
+ .allowed_protos = IR_TYPE_RC5 |
+ IR_TYPE_RC6 |
+ IR_TYPE_NEC,
+ .change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 1,
@@ -2623,12 +2597,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
- .rc_props = {
- .allowed_protos = IR_TYPE_RC5 |
- IR_TYPE_RC6 |
- IR_TYPE_NEC,
- .change_protocol = dib0700_change_protocol,
- },
+ .allowed_protos = IR_TYPE_RC5 |
+ IR_TYPE_RC6 |
+ IR_TYPE_NEC,
+ .change_protocol = dib0700_change_protocol,
},
},
};
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index b579fed..bbba149 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -106,10 +106,10 @@ static void legacy_dvb_usb_read_remote_control(struct work_struct *work)
d->last_event = event;
case REMOTE_KEY_REPEAT:
deb_rc("key repeated\n");
- input_event(d->rc_input_dev, EV_KEY, event, 1);
- input_sync(d->rc_input_dev);
- input_event(d->rc_input_dev, EV_KEY, d->last_event, 0);
- input_sync(d->rc_input_dev);
+ input_event(d->input_dev, EV_KEY, event, 1);
+ input_sync(d->input_dev);
+ input_event(d->input_dev, EV_KEY, d->last_event, 0);
+ input_sync(d->input_dev);
break;
default:
break;
@@ -154,10 +154,22 @@ schedule:
schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc.legacy.rc_interval));
}
-static int legacy_dvb_usb_remote_init(struct dvb_usb_device *d,
- struct input_dev *input_dev)
+static int legacy_dvb_usb_remote_init(struct dvb_usb_device *d)
{
int i, err, rc_interval;
+ struct input_dev *input_dev;
+
+ input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY);
+ input_dev->name = "IR-receiver inside an USB DVB receiver";
+ input_dev->phys = d->rc_phys;
+ usb_to_input_id(d->udev, &input_dev->id);
+ input_dev->dev.parent = &d->udev->dev;
+ d->input_dev = input_dev;
+ d->rc_dev = NULL;
input_dev->getkeycode = legacy_dvb_usb_getkeycode;
input_dev->setkeycode = legacy_dvb_usb_setkeycode;
@@ -221,18 +233,34 @@ static void dvb_usb_read_remote_control(struct work_struct *work)
msecs_to_jiffies(d->props.rc.core.rc_interval));
}
-static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d,
- struct input_dev *input_dev)
+static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d)
{
int err, rc_interval;
+ struct rc_dev *dev;
+
+ dev = rc_allocate_device();
+ if (!dev)
+ return -ENOMEM;
- d->props.rc.core.rc_props.priv = d;
- err = ir_input_register(input_dev,
- d->props.rc.core.rc_codes,
- &d->props.rc.core.rc_props,
- d->props.rc.core.module_name);
- if (err < 0)
+ dev->driver_name = d->props.rc.core.module_name;
+ dev->map_name = d->props.rc.core.rc_codes;
+ dev->change_protocol = d->props.rc.core.change_protocol;
+ dev->allowed_protos = d->props.rc.core.allowed_protos;
+ dev->driver_type = RC_DRIVER_SCANCODE;
+ usb_to_input_id(d->udev, &dev->input_id);
+ dev->input_name = "IR-receiver inside an USB DVB receiver";
+ dev->input_phys = d->rc_phys;
+ dev->dev.parent = &d->udev->dev;
+ dev->priv = d;
+
+ err = rc_register_device(dev);
+ if (err < 0) {
+ rc_free_device(dev);
return err;
+ }
+
+ d->input_dev = NULL;
+ d->rc_dev = dev;
if (!d->props.rc.core.rc_query || d->props.rc.core.bulk_mode)
return 0;
@@ -251,7 +279,6 @@ static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d,
int dvb_usb_remote_init(struct dvb_usb_device *d)
{
- struct input_dev *input_dev;
int err;
if (dvb_usb_disable_rc_polling)
@@ -267,26 +294,14 @@ int dvb_usb_remote_init(struct dvb_usb_device *d)
usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
- input_dev = input_allocate_device();
- if (!input_dev)
- return -ENOMEM;
-
- input_dev->evbit[0] = BIT_MASK(EV_KEY);
- input_dev->name = "IR-receiver inside an USB DVB receiver";
- input_dev->phys = d->rc_phys;
- usb_to_input_id(d->udev, &input_dev->id);
- input_dev->dev.parent = &d->udev->dev;
-
/* Start the remote-control polling. */
if (d->props.rc.legacy.rc_interval < 40)
d->props.rc.legacy.rc_interval = 100; /* default */
- d->rc_input_dev = input_dev;
-
if (d->props.rc.mode == DVB_RC_LEGACY)
- err = legacy_dvb_usb_remote_init(d, input_dev);
+ err = legacy_dvb_usb_remote_init(d);
else
- err = rc_core_dvb_usb_remote_init(d, input_dev);
+ err = rc_core_dvb_usb_remote_init(d);
if (err)
return err;
@@ -301,9 +316,9 @@ int dvb_usb_remote_exit(struct dvb_usb_device *d)
cancel_rearming_delayed_work(&d->rc_query_work);
flush_scheduled_work();
if (d->props.rc.mode == DVB_RC_LEGACY)
- input_unregister_device(d->rc_input_dev);
+ input_unregister_device(d->input_dev);
else
- ir_input_unregister(d->rc_input_dev);
+ rc_unregister_device(d->rc_dev);
}
d->state &= ~DVB_USB_STATE_REMOTE;
return 0;
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 34f7b3b..83aa982 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -180,18 +180,20 @@ struct dvb_rc_legacy {
* struct dvb_rc properties of remote controller, using rc-core
* @rc_codes: name of rc codes table
* @protocol: type of protocol(s) currently used by the driver
+ * @allowed_protos: protocol(s) supported by the driver
+ * @change_protocol: callback to change protocol
* @rc_query: called to query an event event.
* @rc_interval: time in ms between two queries.
- * @rc_props: remote controller properties
* @bulk_mode: device supports bulk mode for RC (disable polling mode)
*/
struct dvb_rc {
char *rc_codes;
u64 protocol;
+ u64 allowed_protos;
+ int (*change_protocol)(struct rc_dev *dev, u64 ir_type);
char *module_name;
int (*rc_query) (struct dvb_usb_device *d);
int rc_interval;
- struct ir_dev_props rc_props;
bool bulk_mode; /* uses bulk mode */
};
@@ -385,7 +387,8 @@ struct dvb_usb_adapter {
*
* @i2c_adap: device's i2c_adapter if it uses I2CoverUSB
*
- * @rc_input_dev: input device for the remote control.
+ * @rc_dev: rc device for the remote control (rc-core mode)
+ * @input_dev: input device for the remote control (legacy mode)
* @rc_query_work: struct work_struct frequent rc queries
* @last_event: last triggered event
* @last_state: last state (no, pressed, repeat)
@@ -418,7 +421,8 @@ struct dvb_usb_device {
struct dvb_usb_adapter adapter[MAX_NO_OF_ADAPTER_PER_DEVICE];
/* remote control */
- struct input_dev *rc_input_dev;
+ struct rc_dev *rc_dev;
+ struct input_dev *input_dev;
char rc_phys[64];
struct delayed_work rc_query_work;
u32 last_event;
diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c
index d939fbb..baa2c82 100644
--- a/drivers/media/dvb/dvb-usb/lmedm04.c
+++ b/drivers/media/dvb/dvb-usb/lmedm04.c
@@ -201,7 +201,7 @@ static int lme2510_remote_keypress(struct dvb_usb_adapter *adap, u16 keypress)
deb_info(1, "INT Key Keypress =%04x", keypress);
if (keypress > 0)
- ir_keydown(d->rc_input_dev, keypress, 0);
+ ir_keydown(d->rc_dev, keypress, 0);
return 0;
}
@@ -585,41 +585,39 @@ static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
static int lme2510_int_service(struct dvb_usb_adapter *adap)
{
struct dvb_usb_device *d = adap->dev;
- struct input_dev *input_dev;
- char *ir_codes = RC_MAP_LME2510;
- int ret = 0;
+ struct rc_dev *rc;
+ int ret;
info("STA Configuring Remote");
- usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
-
- strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
-
- input_dev = input_allocate_device();
- if (!input_dev)
+ rc = rc_allocate_device();
+ if (!rc)
return -ENOMEM;
- input_dev->name = "LME2510 Remote Control";
- input_dev->phys = d->rc_phys;
-
- usb_to_input_id(d->udev, &input_dev->id);
+ usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
+ strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
- ret |= ir_input_register(input_dev, ir_codes, NULL, "LME 2510");
+ rc->input_name = "LME2510 Remote Control";
+ rc->input_phys = d->rc_phys;
+ rc->map_name = RC_MAP_LME2510;
+ rc->driver_name = "LME 2510";
+ usb_to_input_id(d->udev, &rc->input_id);
+ ret = rc_register_device(rc);
if (ret) {
- input_free_device(input_dev);
+ rc_free_device(rc);
return ret;
}
+ d->rc_dev = rc;
- d->rc_input_dev = input_dev;
/* Start the Interupt */
ret = lme2510_int_read(adap);
-
if (ret < 0) {
- ir_input_unregister(input_dev);
- input_free_device(input_dev);
+ rc_unregister_device(rc);
+ return -ENODEV;
}
- return (ret < 0) ? -ENODEV : 0;
+
+ return 0;
}
static u8 check_sum(u8 *p, u8 len)
@@ -1036,7 +1034,7 @@ void *lme2510_exit_int(struct dvb_usb_device *d)
usb_free_coherent(d->udev, 5000, st->buffer,
st->lme_urb->transfer_dma);
info("Interupt Service Stopped");
- ir_input_unregister(d->rc_input_dev);
+ rc_unregister_device(d->rc_dev);
info("Remote Stopped");
}
return buffer;
diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h
index d0b645a..bd400d2 100644
--- a/drivers/media/dvb/mantis/mantis_common.h
+++ b/drivers/media/dvb/mantis/mantis_common.h
@@ -171,7 +171,9 @@ struct mantis_pci {
struct work_struct uart_work;
spinlock_t uart_lock;
- struct input_dev *rc;
+ struct rc_dev *rc;
+ char input_name[80];
+ char input_phys[80];
};
#define MANTIS_HIF_STATUS (mantis->gpio_status)
diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c
index a99489b..209f211 100644
--- a/drivers/media/dvb/mantis/mantis_input.c
+++ b/drivers/media/dvb/mantis/mantis_input.c
@@ -18,7 +18,6 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/input.h>
#include <media/ir-core.h>
#include <linux/pci.h>
@@ -33,6 +32,7 @@
#include "mantis_uart.h"
#define MODULE_NAME "mantis_core"
+#define RC_MAP_MANTIS "rc-mantis"
static struct ir_scancode mantis_ir_table[] = {
{ 0x29, KEY_POWER },
@@ -95,53 +95,65 @@ static struct ir_scancode mantis_ir_table[] = {
{ 0x00, KEY_BLUE },
};
-struct ir_scancode_table ir_mantis = {
- .scan = mantis_ir_table,
- .size = ARRAY_SIZE(mantis_ir_table),
+static struct rc_keymap ir_mantis_map = {
+ .map = {
+ .scan = mantis_ir_table,
+ .size = ARRAY_SIZE(mantis_ir_table),
+ .ir_type = IR_TYPE_UNKNOWN,
+ .name = RC_MAP_MANTIS,
+ }
};
-EXPORT_SYMBOL_GPL(ir_mantis);
int mantis_input_init(struct mantis_pci *mantis)
{
- struct input_dev *rc;
- char name[80], dev[80];
+ struct rc_dev *dev;
int err;
- rc = input_allocate_device();
- if (!rc) {
- dprintk(MANTIS_ERROR, 1, "Input device allocate failed");
- return -ENOMEM;
- }
+ err = ir_register_map(&ir_mantis_map);
+ if (err)
+ goto out;
- sprintf(name, "Mantis %s IR receiver", mantis->hwconfig->model_name);
- sprintf(dev, "pci-%s/ir0", pci_name(mantis->pdev));
+ dev = rc_allocate_device();
+ if (!dev) {
+ dprintk(MANTIS_ERROR, 1, "Remote device allocation failed");
+ err = -ENOMEM;
+ goto out_map;
+ }
- rc->name = name;
- rc->phys = dev;
+ sprintf(mantis->input_name, "Mantis %s IR receiver", mantis->hwconfig->model_name);
+ sprintf(mantis->input_phys, "pci-%s/ir0", pci_name(mantis->pdev));
- rc->id.bustype = BUS_PCI;
- rc->id.vendor = mantis->vendor_id;
- rc->id.product = mantis->device_id;
- rc->id.version = 1;
- rc->dev = mantis->pdev->dev;
+ dev->input_name = mantis->input_name;
+ dev->input_phys = mantis->input_phys;
+ dev->input_id.bustype = BUS_PCI;
+ dev->input_id.vendor = mantis->vendor_id;
+ dev->input_id.product = mantis->device_id;
+ dev->input_id.version = 1;
+ dev->driver_name = MODULE_NAME;
+ dev->map_name = RC_MAP_MANTIS;
+ dev->dev.parent = &mantis->pdev->dev;
- err = __ir_input_register(rc, &ir_mantis, NULL, MODULE_NAME);
+ err = rc_register_device(dev);
if (err) {
dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err);
- input_free_device(rc);
- return -ENODEV;
+ goto out_dev;
}
- mantis->rc = rc;
-
+ mantis->rc = dev;
return 0;
+
+out_dev:
+ rc_free_device(dev);
+out_map:
+ ir_unregister_map(&ir_mantis_map);
+out:
+ return err;
}
int mantis_exit(struct mantis_pci *mantis)
{
- struct input_dev *rc = mantis->rc;
-
- ir_input_unregister(rc);
-
+ rc_unregister_device(mantis->rc);
+ ir_unregister_map(&ir_mantis_map);
return 0;
}
+
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index 135e45b..78765ed 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -438,7 +438,7 @@ static int smscore_init_ir(struct smscore_device_t *coredev)
int rc;
void *buffer;
- coredev->ir.input_dev = NULL;
+ coredev->ir.dev = NULL;
ir_io = sms_get_board(smscore_get_board_id(coredev))->board_cfg.ir;
if (ir_io) {/* only if IR port exist we use IR sub-module */
sms_info("IR loading");
diff --git a/drivers/media/dvb/siano/smsir.c b/drivers/media/dvb/siano/smsir.c
index a27c44a..ebd7305 100644
--- a/drivers/media/dvb/siano/smsir.c
+++ b/drivers/media/dvb/siano/smsir.c
@@ -45,25 +45,24 @@ void sms_ir_event(struct smscore_device_t *coredev, const char *buf, int len)
ev.duration = abs(samples[i]) * 1000; /* Convert to ns */
ev.pulse = (samples[i] > 0) ? false : true;
- ir_raw_event_store(coredev->ir.input_dev, &ev);
+ ir_raw_event_store(coredev->ir.dev, &ev);
}
- ir_raw_event_handle(coredev->ir.input_dev);
+ ir_raw_event_handle(coredev->ir.dev);
}
int sms_ir_init(struct smscore_device_t *coredev)
{
- struct input_dev *input_dev;
+ int err;
int board_id = smscore_get_board_id(coredev);
+ struct rc_dev *dev;
- sms_log("Allocating input device");
- input_dev = input_allocate_device();
- if (!input_dev) {
+ sms_log("Allocating rc device");
+ dev = rc_allocate_device();
+ if (!dev) {
sms_err("Not enough memory");
return -ENOMEM;
}
- coredev->ir.input_dev = input_dev;
-
coredev->ir.controller = 0; /* Todo: vega/nova SPI number */
coredev->ir.timeout = IR_DEFAULT_TIMEOUT;
sms_log("IR port %d, timeout %d ms",
@@ -75,38 +74,41 @@ int sms_ir_init(struct smscore_device_t *coredev)
strlcpy(coredev->ir.phys, coredev->devpath, sizeof(coredev->ir.phys));
strlcat(coredev->ir.phys, "/ir0", sizeof(coredev->ir.phys));
- input_dev->name = coredev->ir.name;
- input_dev->phys = coredev->ir.phys;
- input_dev->dev.parent = coredev->device;
+ dev->input_name = coredev->ir.name;
+ dev->input_phys = coredev->ir.phys;
+ dev->dev.parent = coredev->device;
#if 0
/* TODO: properly initialize the parameters bellow */
- input_dev->id.bustype = BUS_USB;
- input_dev->id.version = 1;
- input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
- input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+ dev->input_id.bustype = BUS_USB;
+ dev->input_id.version = 1;
+ dev->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+ dev->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
#endif
- coredev->ir.props.priv = coredev;
- coredev->ir.props.driver_type = RC_DRIVER_IR_RAW;
- coredev->ir.props.allowed_protos = IR_TYPE_ALL;
+ dev->priv = coredev;
+ dev->driver_type = RC_DRIVER_IR_RAW;
+ dev->allowed_protos = IR_TYPE_ALL;
+ dev->map_name = sms_get_board(board_id)->rc_codes;
+ dev->driver_name = MODULE_NAME;
- sms_log("Input device (IR) %s is set for key events", input_dev->name);
+ sms_log("Input device (IR) %s is set for key events", dev->input_name);
- if (ir_input_register(input_dev, sms_get_board(board_id)->rc_codes,
- &coredev->ir.props, MODULE_NAME)) {
+ err = rc_register_device(dev);
+ if (err < 0) {
sms_err("Failed to register device");
- input_free_device(input_dev);
- return -EACCES;
+ rc_free_device(dev);
+ return err;
}
+ coredev->ir.dev = dev;
return 0;
}
void sms_ir_exit(struct smscore_device_t *coredev)
{
- if (coredev->ir.input_dev)
- ir_input_unregister(coredev->ir.input_dev);
+ if (coredev->ir.dev)
+ rc_unregister_device(coredev->ir.dev);
sms_log("");
}
diff --git a/drivers/media/dvb/siano/smsir.h b/drivers/media/dvb/siano/smsir.h
index 926e247..c2f68a4 100644
--- a/drivers/media/dvb/siano/smsir.h
+++ b/drivers/media/dvb/siano/smsir.h
@@ -35,13 +35,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
struct smscore_device_t;
struct ir_t {
- struct input_dev *input_dev;
+ struct rc_dev *dev;
char name[40];
char phys[32];
char *rc_codes;
u64 protocol;
- struct ir_dev_props props;
u32 timeout;
u32 controller;
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 13ac9e3..53e94bf 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -33,7 +33,6 @@
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
-#include <linux/input.h>
#include <linux/spinlock.h>
#include <media/ir-core.h>
@@ -96,7 +95,7 @@ MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
struct budget_ci_ir {
- struct input_dev *dev;
+ struct rc_dev *dev;
struct tasklet_struct msp430_irq_tasklet;
char name[72]; /* 40 + 32 for (struct saa7146_dev).name */
char phys[32];
@@ -118,7 +117,7 @@ struct budget_ci {
static void msp430_ir_interrupt(unsigned long data)
{
struct budget_ci *budget_ci = (struct budget_ci *) data;
- struct input_dev *dev = budget_ci->ir.dev;
+ struct rc_dev *dev = budget_ci->ir.dev;
u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
/*
@@ -166,13 +165,11 @@ static void msp430_ir_interrupt(unsigned long data)
static int msp430_ir_init(struct budget_ci *budget_ci)
{
struct saa7146_dev *saa = budget_ci->budget.dev;
- struct input_dev *input_dev = budget_ci->ir.dev;
+ struct rc_dev *dev;
int error;
- char *ir_codes = NULL;
-
- budget_ci->ir.dev = input_dev = input_allocate_device();
- if (!input_dev) {
+ dev = rc_allocate_device();
+ if (!dev) {
printk(KERN_ERR "budget_ci: IR interface initialisation failed\n");
return -ENOMEM;
}
@@ -182,19 +179,19 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
snprintf(budget_ci->ir.phys, sizeof(budget_ci->ir.phys),
"pci-%s/ir0", pci_name(saa->pci));
- input_dev->name = budget_ci->ir.name;
-
- input_dev->phys = budget_ci->ir.phys;
- input_dev->id.bustype = BUS_PCI;
- input_dev->id.version = 1;
+ dev->driver_name = MODULE_NAME;
+ dev->input_name = budget_ci->ir.name;
+ dev->input_phys = budget_ci->ir.phys;
+ dev->input_id.bustype = BUS_PCI;
+ dev->input_id.version = 1;
if (saa->pci->subsystem_vendor) {
- input_dev->id.vendor = saa->pci->subsystem_vendor;
- input_dev->id.product = saa->pci->subsystem_device;
+ dev->input_id.vendor = saa->pci->subsystem_vendor;
+ dev->input_id.product = saa->pci->subsystem_device;
} else {
- input_dev->id.vendor = saa->pci->vendor;
- input_dev->id.product = saa->pci->device;
+ dev->input_id.vendor = saa->pci->vendor;
+ dev->input_id.product = saa->pci->device;
}
- input_dev->dev.parent = &saa->pci->dev;
+ dev->dev.parent = &saa->pci->dev;
if (rc5_device < 0)
budget_ci->ir.rc5_device = IR_DEVICE_ANY;
@@ -208,7 +205,7 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
case 0x1011:
case 0x1012:
/* The hauppauge keymap is a superset of these remotes */
- ir_codes = RC_MAP_HAUPPAUGE_NEW;
+ dev->map_name = RC_MAP_HAUPPAUGE_NEW;
if (rc5_device < 0)
budget_ci->ir.rc5_device = 0x1f;
@@ -218,23 +215,22 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
case 0x1019:
case 0x101a:
/* for the Technotrend 1500 bundled remote */
- ir_codes = RC_MAP_TT_1500;
+ dev->map_name = RC_MAP_TT_1500;
break;
default:
/* unknown remote */
- ir_codes = RC_MAP_BUDGET_CI_OLD;
+ dev->map_name = RC_MAP_BUDGET_CI_OLD;
break;
}
- error = ir_input_register(input_dev, ir_codes, NULL, MODULE_NAME);
+ error = rc_register_device(dev);
if (error) {
printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error);
+ rc_free_device(dev);
return error;
}
- /* note: these must be after input_register_device */
- input_dev->rep[REP_DELAY] = 400;
- input_dev->rep[REP_PERIOD] = 250;
+ budget_ci->ir.dev = dev;
tasklet_init(&budget_ci->ir.msp430_irq_tasklet, msp430_ir_interrupt,
(unsigned long) budget_ci);
@@ -248,13 +244,12 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
static void msp430_ir_deinit(struct budget_ci *budget_ci)
{
struct saa7146_dev *saa = budget_ci->budget.dev;
- struct input_dev *dev = budget_ci->ir.dev;
SAA7146_IER_DISABLE(saa, MASK_06);
saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
tasklet_kill(&budget_ci->ir.msp430_irq_tasklet);
- ir_input_unregister(dev);
+ rc_unregister_device(budget_ci->ir.dev);
}
static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index eb71c3a..4b4f613 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -31,10 +31,6 @@
static int ir_debug;
module_param(ir_debug, int, 0644);
-static int repeat_delay = 500;
-module_param(repeat_delay, int, 0644);
-static int repeat_period = 33;
-module_param(repeat_period, int, 0644);
static int ir_rc5_remote_gap = 885;
module_param(ir_rc5_remote_gap, int, 0644);
@@ -317,15 +313,15 @@ int bttv_input_init(struct bttv *btv)
{
struct card_ir *ir;
char *ir_codes = NULL;
- struct input_dev *input_dev;
+ struct rc_dev *rc;
int err = -ENOMEM;
if (!btv->has_remote)
return -ENODEV;
ir = kzalloc(sizeof(*ir),GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!ir || !input_dev)
+ rc = rc_allocate_device();
+ if (!ir || !rc)
goto err_out_free;
/* detect & configure */
@@ -431,44 +427,43 @@ int bttv_input_init(struct bttv *btv)
}
/* init input device */
- ir->dev = input_dev;
+ ir->dev = rc;
snprintf(ir->name, sizeof(ir->name), "bttv IR (card=%d)",
btv->c.type);
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
pci_name(btv->c.pci));
- input_dev->name = ir->name;
- input_dev->phys = ir->phys;
- input_dev->id.bustype = BUS_PCI;
- input_dev->id.version = 1;
+ rc->input_name = ir->name;
+ rc->input_phys = ir->phys;
+ rc->input_id.bustype = BUS_PCI;
+ rc->input_id.version = 1;
if (btv->c.pci->subsystem_vendor) {
- input_dev->id.vendor = btv->c.pci->subsystem_vendor;
- input_dev->id.product = btv->c.pci->subsystem_device;
+ rc->input_id.vendor = btv->c.pci->subsystem_vendor;
+ rc->input_id.product = btv->c.pci->subsystem_device;
} else {
- input_dev->id.vendor = btv->c.pci->vendor;
- input_dev->id.product = btv->c.pci->device;
+ rc->input_id.vendor = btv->c.pci->vendor;
+ rc->input_id.product = btv->c.pci->device;
}
- input_dev->dev.parent = &btv->c.pci->dev;
+ rc->dev.parent = &btv->c.pci->dev;
+ rc->map_name = ir_codes;
+ rc->driver_name = MODULE_NAME;
btv->remote = ir;
bttv_ir_start(btv, ir);
/* all done */
- err = ir_input_register(btv->remote->dev, ir_codes, NULL, MODULE_NAME);
+ err = rc_register_device(rc);
if (err)
goto err_out_stop;
- /* the remote isn't as bouncy as a keyboard */
- ir->dev->rep[REP_DELAY] = repeat_delay;
- ir->dev->rep[REP_PERIOD] = repeat_period;
-
return 0;
err_out_stop:
bttv_ir_stop(btv);
btv->remote = NULL;
err_out_free:
+ rc_free_device(rc);
kfree(ir);
return err;
}
@@ -479,7 +474,7 @@ void bttv_input_fini(struct bttv *btv)
return;
bttv_ir_stop(btv);
- ir_input_unregister(btv->remote->dev);
+ rc_unregister_device(btv->remote->dev);
kfree(btv->remote);
btv->remote = NULL;
}
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index bb61870..f1bb3a8 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -35,7 +35,6 @@
* 02110-1301, USA.
*/
-#include <linux/input.h>
#include <linux/slab.h>
#include <media/ir-core.h>
#include <media/v4l2-subdev.h>
@@ -62,16 +61,16 @@ static void cx23885_input_process_measurements(struct cx23885_dev *dev,
count = num / sizeof(struct ir_raw_event);
for (i = 0; i < count; i++) {
- ir_raw_event_store(kernel_ir->inp_dev,
+ ir_raw_event_store(kernel_ir->rc,
&ir_core_event[i]);
handle = true;
}
} while (num != 0);
if (overrun)
- ir_raw_event_reset(kernel_ir->inp_dev);
+ ir_raw_event_reset(kernel_ir->rc);
else if (handle)
- ir_raw_event_handle(kernel_ir->inp_dev);
+ ir_raw_event_handle(kernel_ir->rc);
}
void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
@@ -197,9 +196,9 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
return 0;
}
-static int cx23885_input_ir_open(void *priv)
+static int cx23885_input_ir_open(struct rc_dev *rc)
{
- struct cx23885_kernel_ir *kernel_ir = priv;
+ struct cx23885_kernel_ir *kernel_ir = rc->priv;
if (kernel_ir->cx == NULL)
return -ENODEV;
@@ -234,9 +233,9 @@ static void cx23885_input_ir_stop(struct cx23885_dev *dev)
flush_scheduled_work();
}
-static void cx23885_input_ir_close(void *priv)
+static void cx23885_input_ir_close(struct rc_dev *rc)
{
- struct cx23885_kernel_ir *kernel_ir = priv;
+ struct cx23885_kernel_ir *kernel_ir = rc->priv;
if (kernel_ir->cx != NULL)
cx23885_input_ir_stop(kernel_ir->cx);
@@ -245,9 +244,7 @@ static void cx23885_input_ir_close(void *priv)
int cx23885_input_init(struct cx23885_dev *dev)
{
struct cx23885_kernel_ir *kernel_ir;
- struct input_dev *inp_dev;
- struct ir_dev_props *props;
-
+ struct rc_dev *rc;
char *rc_map;
enum rc_driver_type driver_type;
unsigned long allowed_protos;
@@ -294,37 +291,36 @@ int cx23885_input_init(struct cx23885_dev *dev)
pci_name(dev->pci));
/* input device */
- inp_dev = input_allocate_device();
- if (inp_dev == NULL) {
+ rc = rc_allocate_device();
+ if (!rc) {
ret = -ENOMEM;
goto err_out_free;
}
- kernel_ir->inp_dev = inp_dev;
- inp_dev->name = kernel_ir->name;
- inp_dev->phys = kernel_ir->phys;
- inp_dev->id.bustype = BUS_PCI;
- inp_dev->id.version = 1;
+ kernel_ir->rc = rc;
+ rc->input_name = kernel_ir->name;
+ rc->input_phys = kernel_ir->phys;
+ rc->input_id.bustype = BUS_PCI;
+ rc->input_id.version = 1;
if (dev->pci->subsystem_vendor) {
- inp_dev->id.vendor = dev->pci->subsystem_vendor;
- inp_dev->id.product = dev->pci->subsystem_device;
+ rc->input_id.vendor = dev->pci->subsystem_vendor;
+ rc->input_id.product = dev->pci->subsystem_device;
} else {
- inp_dev->id.vendor = dev->pci->vendor;
- inp_dev->id.product = dev->pci->device;
+ rc->input_id.vendor = dev->pci->vendor;
+ rc->input_id.product = dev->pci->device;
}
- inp_dev->dev.parent = &dev->pci->dev;
-
- /* kernel ir device properties */
- props = &kernel_ir->props;
- props->driver_type = driver_type;
- props->allowed_protos = allowed_protos;
- props->priv = kernel_ir;
- props->open = cx23885_input_ir_open;
- props->close = cx23885_input_ir_close;
+ rc->dev.parent = &dev->pci->dev;
+ rc->driver_type = driver_type;
+ rc->allowed_protos = allowed_protos;
+ rc->priv = kernel_ir;
+ rc->open = cx23885_input_ir_open;
+ rc->close = cx23885_input_ir_close;
+ rc->map_name = rc_map;
+ rc->driver_name = MODULE_NAME;
/* Go */
dev->kernel_ir = kernel_ir;
- ret = ir_input_register(inp_dev, rc_map, props, MODULE_NAME);
+ ret = rc_register_device(rc);
if (ret)
goto err_out_stop;
@@ -333,7 +329,7 @@ int cx23885_input_init(struct cx23885_dev *dev)
err_out_stop:
cx23885_input_ir_stop(dev);
dev->kernel_ir = NULL;
- /* TODO: double check clean-up of kernel_ir->inp_dev */
+ rc_free_device(rc);
err_out_free:
kfree(kernel_ir->phys);
kfree(kernel_ir->name);
@@ -348,7 +344,7 @@ void cx23885_input_fini(struct cx23885_dev *dev)
if (dev->kernel_ir == NULL)
return;
- ir_input_unregister(dev->kernel_ir->inp_dev);
+ rc_unregister_device(dev->kernel_ir->rc);
kfree(dev->kernel_ir->phys);
kfree(dev->kernel_ir->name);
kfree(dev->kernel_ir);
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index ed94b17..f350d88 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -310,8 +310,7 @@ struct cx23885_kernel_ir {
char *name;
char *phys;
- struct input_dev *inp_dev;
- struct ir_dev_props props;
+ struct rc_dev *rc;
};
struct cx23885_dev {
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index 8c41124..3b2ef45 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -24,7 +24,6 @@
#include <linux/init.h>
#include <linux/hrtimer.h>
-#include <linux/input.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/module.h>
@@ -38,8 +37,7 @@
struct cx88_IR {
struct cx88_core *core;
- struct input_dev *input;
- struct ir_dev_props props;
+ struct rc_dev *dev;
int users;
@@ -125,26 +123,26 @@ static void cx88_ir_handle_key(struct cx88_IR *ir)
data = (data << 4) | ((gpio_key & 0xf0) >> 4);
- ir_keydown(ir->input, data, 0);
+ ir_keydown(ir->dev, data, 0);
} else if (ir->mask_keydown) {
/* bit set on keydown */
if (gpio & ir->mask_keydown)
- ir_keydown_notimeout(ir->input, data, 0);
+ ir_keydown_notimeout(ir->dev, data, 0);
else
- ir_keyup(ir->input);
+ ir_keyup(ir->dev);
} else if (ir->mask_keyup) {
/* bit cleared on keydown */
if (0 == (gpio & ir->mask_keyup))
- ir_keydown_notimeout(ir->input, data, 0);
+ ir_keydown_notimeout(ir->dev, data, 0);
else
- ir_keyup(ir->input);
+ ir_keyup(ir->dev);
} else {
/* can't distinguish keydown/up :-/ */
- ir_keydown_notimeout(ir->input, data, 0);
- ir_keyup(ir->input);
+ ir_keydown_notimeout(ir->dev, data, 0);
+ ir_keyup(ir->dev);
}
}
@@ -219,17 +217,17 @@ void cx88_ir_stop(struct cx88_core *core)
__cx88_ir_stop(core);
}
-static int cx88_ir_open(void *priv)
+static int cx88_ir_open(struct rc_dev *rc)
{
- struct cx88_core *core = priv;
+ struct cx88_core *core = rc->priv;
core->ir->users++;
return __cx88_ir_start(core);
}
-static void cx88_ir_close(void *priv)
+static void cx88_ir_close(struct rc_dev *rc)
{
- struct cx88_core *core = priv;
+ struct cx88_core *core = rc->priv;
core->ir->users--;
if (!core->ir->users)
@@ -241,7 +239,7 @@ static void cx88_ir_close(void *priv)
int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
{
struct cx88_IR *ir;
- struct input_dev *input_dev;
+ struct rc_dev *dev;
char *ir_codes = NULL;
u64 ir_type = IR_TYPE_OTHER;
int err = -ENOMEM;
@@ -250,11 +248,11 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
*/
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!ir || !input_dev)
+ dev = rc_allocate_device();
+ if (!ir || !dev)
goto err_out_free;
- ir->input = input_dev;
+ ir->dev = dev;
/* detect & configure */
switch (core->boardnr) {
@@ -435,43 +433,45 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
snprintf(ir->name, sizeof(ir->name), "cx88 IR (%s)", core->board.name);
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci));
- input_dev->name = ir->name;
- input_dev->phys = ir->phys;
- input_dev->id.bustype = BUS_PCI;
- input_dev->id.version = 1;
+ dev->input_name = ir->name;
+ dev->input_phys = ir->phys;
+ dev->input_id.bustype = BUS_PCI;
+ dev->input_id.version = 1;
if (pci->subsystem_vendor) {
- input_dev->id.vendor = pci->subsystem_vendor;
- input_dev->id.product = pci->subsystem_device;
+ dev->input_id.vendor = pci->subsystem_vendor;
+ dev->input_id.product = pci->subsystem_device;
} else {
- input_dev->id.vendor = pci->vendor;
- input_dev->id.product = pci->device;
+ dev->input_id.vendor = pci->vendor;
+ dev->input_id.product = pci->device;
}
- input_dev->dev.parent = &pci->dev;
- /* record handles to ourself */
- ir->core = core;
- core->ir = ir;
+ dev->dev.parent = &pci->dev;
+ dev->map_name = ir_codes;
+ dev->driver_name = MODULE_NAME;
+ dev->priv = core;
+ dev->open = cx88_ir_open;
+ dev->close = cx88_ir_close;
+ dev->scanmask = hardware_mask;
if (ir->sampling) {
- ir_type = IR_TYPE_ALL;
- ir->props.driver_type = RC_DRIVER_IR_RAW;
- ir->props.timeout = 10 * 1000 * 1000; /* 10 ms */
- } else
- ir->props.driver_type = RC_DRIVER_SCANCODE;
-
- ir->props.priv = core;
- ir->props.open = cx88_ir_open;
- ir->props.close = cx88_ir_close;
- ir->props.scanmask = hardware_mask;
- ir->props.allowed_protos = ir_type;
+ dev->driver_type = RC_DRIVER_IR_RAW;
+ dev->timeout = 10 * 1000 * 1000; /* 10 ms */
+ } else {
+ dev->driver_type = RC_DRIVER_SCANCODE;
+ dev->allowed_protos = ir_type;
+ }
+
+ ir->core = core;
+ core->ir = ir;
/* all done */
- err = ir_input_register(ir->input, ir_codes, &ir->props, MODULE_NAME);
+ err = rc_register_device(dev);
if (err)
goto err_out_free;
return 0;
- err_out_free:
+err_out_free:
+ rc_free_device(dev);
core->ir = NULL;
kfree(ir);
return err;
@@ -486,7 +486,7 @@ int cx88_ir_fini(struct cx88_core *core)
return 0;
cx88_ir_stop(core);
- ir_input_unregister(ir->input);
+ rc_unregister_device(ir->dev);
kfree(ir);
/* done */
@@ -502,7 +502,6 @@ void cx88_ir_irq(struct cx88_core *core)
u32 samples;
unsigned todo, bits;
struct ir_raw_event ev;
- struct ir_input_dev *irdev;
if (!ir || !ir->sampling)
return;
@@ -513,9 +512,8 @@ void cx88_ir_irq(struct cx88_core *core)
* represents a pulse.
*/
samples = cx_read(MO_SAMPLE_IO);
- irdev = input_get_drvdata(ir->input);
- if (samples == 0xff && irdev->idle)
+ if (samples == 0xff && ir->dev->idle)
return;
init_ir_raw_event(&ev);
@@ -523,10 +521,10 @@ void cx88_ir_irq(struct cx88_core *core)
ev.pulse = samples & 0x80000000 ? false : true;
bits = min(todo, 32U - fls(ev.pulse ? samples : ~samples));
ev.duration = (bits * NSEC_PER_SEC) / (1000 * ir_samplerate);
- ir_raw_event_store_with_filter(ir->input, &ev);
+ ir_raw_event_store_with_filter(ir->dev, &ev);
samples <<= bits;
}
- ir_raw_event_handle(ir->input);
+ ir_raw_event_handle(ir->dev);
}
void cx88_i2c_init_ir(struct cx88_core *core)
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index 6759cd5..b7d3999 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -25,7 +25,6 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/input.h>
#include <linux/usb.h>
#include <linux/slab.h>
@@ -64,7 +63,7 @@ struct em28xx_ir_poll_result {
struct em28xx_IR {
struct em28xx *dev;
- struct input_dev *input;
+ struct rc_dev *rc;
char name[32];
char phys[32];
@@ -75,10 +74,6 @@ struct em28xx_IR {
unsigned int last_readcount;
int (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *);
-
- /* IR device properties */
-
- struct ir_dev_props props;
};
/**********************************************************
@@ -302,12 +297,12 @@ static void em28xx_ir_handle_key(struct em28xx_IR *ir)
poll_result.toggle_bit, poll_result.read_count,
poll_result.rc_address, poll_result.rc_data[0]);
if (ir->full_code)
- ir_keydown(ir->input,
+ ir_keydown(ir->rc,
poll_result.rc_address << 8 |
poll_result.rc_data[0],
poll_result.toggle_bit);
else
- ir_keydown(ir->input,
+ ir_keydown(ir->rc,
poll_result.rc_data[0],
poll_result.toggle_bit);
@@ -331,9 +326,9 @@ static void em28xx_ir_work(struct work_struct *work)
schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
}
-static int em28xx_ir_start(void *priv)
+static int em28xx_ir_start(struct rc_dev *rc)
{
- struct em28xx_IR *ir = priv;
+ struct em28xx_IR *ir = rc->priv;
INIT_DELAYED_WORK(&ir->work, em28xx_ir_work);
schedule_delayed_work(&ir->work, 0);
@@ -341,17 +336,17 @@ static int em28xx_ir_start(void *priv)
return 0;
}
-static void em28xx_ir_stop(void *priv)
+static void em28xx_ir_stop(struct rc_dev *rc)
{
- struct em28xx_IR *ir = priv;
+ struct em28xx_IR *ir = rc->priv;
cancel_delayed_work_sync(&ir->work);
}
-int em28xx_ir_change_protocol(void *priv, u64 ir_type)
+int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 ir_type)
{
int rc = 0;
- struct em28xx_IR *ir = priv;
+ struct em28xx_IR *ir = rc_dev->priv;
struct em28xx *dev = ir->dev;
u8 ir_config = EM2874_IR_RC5;
@@ -391,7 +386,7 @@ int em28xx_ir_change_protocol(void *priv, u64 ir_type)
int em28xx_ir_init(struct em28xx *dev)
{
struct em28xx_IR *ir;
- struct input_dev *input_dev;
+ struct rc_dev *rc;
int err = -ENOMEM;
if (dev->board.ir_codes == NULL) {
@@ -400,28 +395,27 @@ int em28xx_ir_init(struct em28xx *dev)
}
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!ir || !input_dev)
+ rc = rc_allocate_device();
+ if (!ir || !rc)
goto err_out_free;
/* record handles to ourself */
ir->dev = dev;
dev->ir = ir;
-
- ir->input = input_dev;
+ ir->rc = rc;
/*
* em2874 supports more protocols. For now, let's just announce
* the two protocols that were already tested
*/
- ir->props.allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
- ir->props.priv = ir;
- ir->props.change_protocol = em28xx_ir_change_protocol;
- ir->props.open = em28xx_ir_start;
- ir->props.close = em28xx_ir_stop;
+ rc->allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
+ rc->priv = ir;
+ rc->change_protocol = em28xx_ir_change_protocol;
+ rc->open = em28xx_ir_start;
+ rc->close = em28xx_ir_stop;
/* By default, keep protocol field untouched */
- err = em28xx_ir_change_protocol(ir, IR_TYPE_UNKNOWN);
+ err = em28xx_ir_change_protocol(rc, IR_TYPE_UNKNOWN);
if (err)
goto err_out_free;
@@ -435,27 +429,27 @@ int em28xx_ir_init(struct em28xx *dev)
usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
strlcat(ir->phys, "/input0", sizeof(ir->phys));
- input_dev->name = ir->name;
- input_dev->phys = ir->phys;
- input_dev->id.bustype = BUS_USB;
- input_dev->id.version = 1;
- input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
- input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
-
- input_dev->dev.parent = &dev->udev->dev;
-
-
+ rc->input_name = ir->name;
+ rc->input_phys = ir->phys;
+ rc->input_id.bustype = BUS_USB;
+ rc->input_id.version = 1;
+ rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+ rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+ rc->dev.parent = &dev->udev->dev;
+ rc->map_name = dev->board.ir_codes;
+ rc->driver_name = MODULE_NAME;
/* all done */
- err = ir_input_register(ir->input, dev->board.ir_codes,
- &ir->props, MODULE_NAME);
+ err = rc_register_device(rc);
if (err)
goto err_out_stop;
return 0;
+
err_out_stop:
dev->ir = NULL;
err_out_free:
+ rc_free_device(rc);
kfree(ir);
return err;
}
@@ -468,8 +462,8 @@ int em28xx_ir_fini(struct em28xx *dev)
if (!ir)
return 0;
- em28xx_ir_stop(ir);
- ir_input_unregister(ir->input);
+ em28xx_ir_stop(ir->rc);
+ rc_unregister_device(ir->rc);
kfree(ir);
/* done */
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index aee8943..55a22e7 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -253,7 +253,7 @@ static void ir_key_poll(struct IR_i2c *ir)
}
if (rc)
- ir_keydown(ir->input, ir_key, 0);
+ ir_keydown(ir->rc, ir_key, 0);
}
static void ir_work(struct work_struct *work)
@@ -272,20 +272,20 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
const char *name = NULL;
u64 ir_type = IR_TYPE_UNKNOWN;
struct IR_i2c *ir;
- struct input_dev *input_dev;
+ struct rc_dev *rc;
struct i2c_adapter *adap = client->adapter;
unsigned short addr = client->addr;
int err;
ir = kzalloc(sizeof(struct IR_i2c),GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!ir || !input_dev) {
+ rc = rc_allocate_device();
+ if (!ir || !rc) {
err = -ENOMEM;
goto err_out_free;
}
ir->c = client;
- ir->input = input_dev;
+ ir->rc = rc;
ir->polling_interval = DEFAULT_POLLING_INTERVAL;
i2c_set_clientdata(client, ir);
@@ -384,16 +384,18 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
dev_name(&client->dev));
/* init + register input device */
- input_dev->id.bustype = BUS_I2C;
- input_dev->name = ir->name;
- input_dev->phys = ir->phys;
+ rc->input_id.bustype = BUS_I2C;
+ rc->input_name = ir->name;
+ rc->input_phys = ir->phys;
+ rc->map_name = ir->ir_codes;
+ rc->driver_name = MODULE_NAME;
- err = ir_input_register(ir->input, ir->ir_codes, NULL, MODULE_NAME);
+ err = rc_register_device(rc);
if (err)
goto err_out_free;
printk(MODULE_NAME ": %s detected at %s [%s]\n",
- ir->input->name, ir->input->phys, adap->name);
+ ir->name, ir->phys, adap->name);
/* start polling via eventd */
INIT_DELAYED_WORK(&ir->work, ir_work);
@@ -402,6 +404,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
return 0;
err_out_free:
+ rc_free_device(rc);
kfree(ir);
return err;
}
@@ -414,7 +417,7 @@ static int ir_remove(struct i2c_client *client)
cancel_delayed_work_sync(&ir->work);
/* unregister device */
- ir_input_unregister(ir->input);
+ rc_unregister_device(ir->rc);
/* free memory */
kfree(ir);
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 7a59c26..b1f28b2 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -22,7 +22,6 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/input.h>
#include <linux/slab.h>
#include "saa7134-reg.h"
@@ -45,14 +44,6 @@ MODULE_PARM_DESC(pinnacle_remote, "Specify Pinnacle PCTV remote: 0=coloured, 1=g
static int ir_rc5_remote_gap = 885;
module_param(ir_rc5_remote_gap, int, 0644);
-static int repeat_delay = 500;
-module_param(repeat_delay, int, 0644);
-MODULE_PARM_DESC(repeat_delay, "delay before key repeat started");
-static int repeat_period = 33;
-module_param(repeat_period, int, 0644);
-MODULE_PARM_DESC(repeat_period, "repeat period between "
- "keypresses when key is down");
-
static unsigned int disable_other_ir;
module_param(disable_other_ir, int, 0644);
MODULE_PARM_DESC(disable_other_ir, "disable full codes of "
@@ -523,17 +514,17 @@ void saa7134_ir_stop(struct saa7134_dev *dev)
__saa7134_ir_stop(dev);
}
-static int saa7134_ir_open(void *priv)
+static int saa7134_ir_open(struct rc_dev *rc)
{
- struct saa7134_dev *dev = priv;
+ struct saa7134_dev *dev = rc->priv;
dev->remote->users++;
return __saa7134_ir_start(dev);
}
-static void saa7134_ir_close(void *priv)
+static void saa7134_ir_close(struct rc_dev *rc)
{
- struct saa7134_dev *dev = priv;
+ struct saa7134_dev *dev = rc->priv;
dev->remote->users--;
if (!dev->remote->users)
@@ -541,9 +532,9 @@ static void saa7134_ir_close(void *priv)
}
-static int saa7134_ir_change_protocol(void *priv, u64 ir_type)
+static int saa7134_ir_change_protocol(struct rc_dev *rc, u64 ir_type)
{
- struct saa7134_dev *dev = priv;
+ struct saa7134_dev *dev = rc->priv;
struct card_ir *ir = dev->remote;
u32 nec_gpio, rc5_gpio;
@@ -577,7 +568,7 @@ static int saa7134_ir_change_protocol(void *priv, u64 ir_type)
int saa7134_input_init1(struct saa7134_dev *dev)
{
struct card_ir *ir;
- struct input_dev *input_dev;
+ struct rc_dev *rc;
char *ir_codes = NULL;
u32 mask_keycode = 0;
u32 mask_keydown = 0;
@@ -822,13 +813,13 @@ int saa7134_input_init1(struct saa7134_dev *dev)
}
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!ir || !input_dev) {
+ rc = rc_allocate_device();
+ if (!ir || !rc) {
err = -ENOMEM;
goto err_out_free;
}
- ir->dev = input_dev;
+ ir->dev = rc;
dev->remote = ir;
ir->running = 0;
@@ -848,43 +839,40 @@ int saa7134_input_init1(struct saa7134_dev *dev)
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
pci_name(dev->pci));
-
- ir->props.priv = dev;
- ir->props.open = saa7134_ir_open;
- ir->props.close = saa7134_ir_close;
-
+ rc->priv = dev;
+ rc->open = saa7134_ir_open;
+ rc->close = saa7134_ir_close;
if (raw_decode)
- ir->props.driver_type = RC_DRIVER_IR_RAW;
+ rc->driver_type = RC_DRIVER_IR_RAW;
if (!raw_decode && allow_protocol_change) {
- ir->props.allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
- ir->props.change_protocol = saa7134_ir_change_protocol;
+ rc->allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
+ rc->change_protocol = saa7134_ir_change_protocol;
}
- input_dev->name = ir->name;
- input_dev->phys = ir->phys;
- input_dev->id.bustype = BUS_PCI;
- input_dev->id.version = 1;
+ rc->input_name = ir->name;
+ rc->input_phys = ir->phys;
+ rc->input_id.bustype = BUS_PCI;
+ rc->input_id.version = 1;
if (dev->pci->subsystem_vendor) {
- input_dev->id.vendor = dev->pci->subsystem_vendor;
- input_dev->id.product = dev->pci->subsystem_device;
+ rc->input_id.vendor = dev->pci->subsystem_vendor;
+ rc->input_id.product = dev->pci->subsystem_device;
} else {
- input_dev->id.vendor = dev->pci->vendor;
- input_dev->id.product = dev->pci->device;
+ rc->input_id.vendor = dev->pci->vendor;
+ rc->input_id.product = dev->pci->device;
}
- input_dev->dev.parent = &dev->pci->dev;
+ rc->dev.parent = &dev->pci->dev;
+ rc->map_name = ir_codes;
+ rc->driver_name = MODULE_NAME;
- err = ir_input_register(ir->dev, ir_codes, &ir->props, MODULE_NAME);
+ err = rc_register_device(rc);
if (err)
goto err_out_free;
- /* the remote isn't as bouncy as a keyboard */
- ir->dev->rep[REP_DELAY] = repeat_delay;
- ir->dev->rep[REP_PERIOD] = repeat_period;
-
return 0;
err_out_free:
+ rc_free_device(rc);
dev->remote = NULL;
kfree(ir);
return err;
@@ -896,7 +884,7 @@ void saa7134_input_fini(struct saa7134_dev *dev)
return;
saa7134_ir_stop(dev);
- ir_input_unregister(dev->remote->dev);
+ rc_unregister_device(dev->remote->dev);
kfree(dev->remote);
dev->remote = NULL;
}
diff --git a/drivers/staging/tm6000/tm6000-input.c b/drivers/staging/tm6000/tm6000-input.c
index 3e74884..3517d20 100644
--- a/drivers/staging/tm6000/tm6000-input.c
+++ b/drivers/staging/tm6000/tm6000-input.c
@@ -50,7 +50,7 @@ struct tm6000_ir_poll_result {
struct tm6000_IR {
struct tm6000_core *dev;
- struct ir_input_dev *input;
+ struct rc_dev *rc;
char name[32];
char phys[32];
@@ -66,7 +66,6 @@ struct tm6000_IR {
/* IR device properties */
u64 ir_type;
- struct ir_dev_props props;
};
@@ -200,7 +199,7 @@ static void tm6000_ir_handle_key(struct tm6000_IR *ir)
dprintk("ir->get_key result data=%04x\n", poll_result.rc_data);
if (ir->key) {
- ir_keydown(ir->input->input_dev, poll_result.rc_data, 0);
+ ir_keydown(ir->rc, poll_result.rc_data, 0);
ir->key = 0;
}
return;
@@ -214,9 +213,9 @@ static void tm6000_ir_work(struct work_struct *work)
schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
}
-static int tm6000_ir_start(void *priv)
+static int tm6000_ir_start(struct rc_dev *rc)
{
- struct tm6000_IR *ir = priv;
+ struct tm6000_IR *ir = rc->priv;
INIT_DELAYED_WORK(&ir->work, tm6000_ir_work);
schedule_delayed_work(&ir->work, 0);
@@ -224,16 +223,16 @@ static int tm6000_ir_start(void *priv)
return 0;
}
-static void tm6000_ir_stop(void *priv)
+static void tm6000_ir_stop(struct rc_dev *rc)
{
- struct tm6000_IR *ir = priv;
+ struct tm6000_IR *ir = rc->priv;
cancel_delayed_work_sync(&ir->work);
}
-int tm6000_ir_change_protocol(void *priv, u64 ir_type)
+int tm6000_ir_change_protocol(struct rc_dev *rc, u64 ir_type)
{
- struct tm6000_IR *ir = priv;
+ struct tm6000_IR *ir = rc->priv;
ir->get_key = default_polling_getkey;
@@ -245,9 +244,9 @@ int tm6000_ir_change_protocol(void *priv, u64 ir_type)
int tm6000_ir_init(struct tm6000_core *dev)
{
struct tm6000_IR *ir;
- struct ir_input_dev *ir_input_dev;
+ struct rc_dev *rc;
int err = -ENOMEM;
- int pipe, size, rc;
+ int pipe, size;
if (!enable_ir)
return -ENODEV;
@@ -259,24 +258,22 @@ int tm6000_ir_init(struct tm6000_core *dev)
return 0;
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
- ir_input_dev = kzalloc(sizeof(*ir_input_dev), GFP_KERNEL);
- ir_input_dev->input_dev = input_allocate_device();
- if (!ir || !ir_input_dev || !ir_input_dev->input_dev)
- goto err_out_free;
+ rc = rc_allocate_device();
+ if (!ir | !rc)
+ goto out;
/* record handles to ourself */
ir->dev = dev;
dev->ir = ir;
-
- ir->input = ir_input_dev;
+ ir->rc = rc;
/* input einrichten */
- ir->props.allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
- ir->props.priv = ir;
- ir->props.change_protocol = tm6000_ir_change_protocol;
- ir->props.open = tm6000_ir_start;
- ir->props.close = tm6000_ir_stop;
- ir->props.driver_type = RC_DRIVER_SCANCODE;
+ rc->allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
+ rc->priv = ir;
+ rc->change_protocol = tm6000_ir_change_protocol;
+ rc->open = tm6000_ir_start;
+ rc->close = tm6000_ir_stop;
+ rc->driver_type = RC_DRIVER_SCANCODE;
ir->polling = 50;
@@ -286,16 +283,17 @@ int tm6000_ir_init(struct tm6000_core *dev)
usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
strlcat(ir->phys, "/input0", sizeof(ir->phys));
- tm6000_ir_change_protocol(ir, IR_TYPE_UNKNOWN);
-
- ir_input_dev->input_dev->name = ir->name;
- ir_input_dev->input_dev->phys = ir->phys;
- ir_input_dev->input_dev->id.bustype = BUS_USB;
- ir_input_dev->input_dev->id.version = 1;
- ir_input_dev->input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
- ir_input_dev->input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+ tm6000_ir_change_protocol(rc, IR_TYPE_UNKNOWN);
- ir_input_dev->input_dev->dev.parent = &dev->udev->dev;
+ rc->input_name = ir->name;
+ rc->input_phys = ir->phys;
+ rc->input_id.bustype = BUS_USB;
+ rc->input_id.version = 1;
+ rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+ rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+ rc->map_name = dev->ir_codes;
+ rc->driver_name = "tm6000";
+ rc->dev.parent = &dev->udev->dev;
if (&dev->int_in) {
dprintk("IR over int\n");
@@ -312,35 +310,32 @@ int tm6000_ir_init(struct tm6000_core *dev)
ir->int_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
if (ir->int_urb->transfer_buffer == NULL) {
usb_free_urb(ir->int_urb);
- goto err_out_stop;
+ goto out;
}
dprintk("int interval: %d\n", dev->int_in.endp->desc.bInterval);
usb_fill_int_urb(ir->int_urb, dev->udev, pipe,
ir->int_urb->transfer_buffer, size,
tm6000_ir_urb_received, dev,
dev->int_in.endp->desc.bInterval);
- rc = usb_submit_urb(ir->int_urb, GFP_KERNEL);
- if (rc) {
+ err = usb_submit_urb(ir->int_urb, GFP_KERNEL);
+ if (err) {
kfree(ir->int_urb->transfer_buffer);
usb_free_urb(ir->int_urb);
- err = rc;
- goto err_out_stop;
+ goto out;
}
ir->urb_data = kzalloc(size, GFP_KERNEL);
}
/* ir register */
- err = ir_input_register(ir->input->input_dev, dev->ir_codes,
- &ir->props, "tm6000");
+ err = rc_register_device(rc);
if (err)
- goto err_out_stop;
+ goto out;
return 0;
-err_out_stop:
+out:
dev->ir = NULL;
-err_out_free:
- kfree(ir_input_dev);
+ rc_free_device(rc);
kfree(ir);
return err;
}
@@ -354,7 +349,7 @@ int tm6000_ir_fini(struct tm6000_core *dev)
if (!ir)
return 0;
- ir_input_unregister(ir->input->input_dev);
+ rc_unregister_device(ir->rc);
if (ir->int_urb) {
usb_kill_urb(ir->int_urb);
@@ -365,8 +360,6 @@ int tm6000_ir_fini(struct tm6000_core *dev)
ir->urb_data = NULL;
}
- kfree(ir->input);
- ir->input = NULL;
kfree(ir);
dev->ir = NULL;
diff --git a/include/media/ir-common.h b/include/media/ir-common.h
index d1ae869..41fefd9 100644
--- a/include/media/ir-common.h
+++ b/include/media/ir-common.h
@@ -36,12 +36,11 @@
/* this was saa7134_ir and bttv_ir, moved here for
* rc5 decoding. */
struct card_ir {
- struct input_dev *dev;
+ struct rc_dev *dev;
char name[32];
char phys[32];
int users;
u32 running:1;
- struct ir_dev_props props;
/* Usual gpio signalling */
u32 mask_keycode;
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
index d41502d..c590998 100644
--- a/include/media/ir-core.h
+++ b/include/media/ir-core.h
@@ -32,21 +32,38 @@ enum rc_driver_type {
};
/**
- * struct ir_dev_props - Allow caller drivers to set special properties
- * @driver_type: specifies if the driver or hardware have already a decoder,
- * or if it needs to use the IR raw event decoders to produce a scancode
+ * struct rc_dev - represents a remote control device
+ * @dev: driver model's view of this device
+ * @input_name: name of the input child device
+ * @input_phys: physical path to the input child device
+ * @input_id: id of the input child device (struct input_id)
+ * @driver_name: name of the hardware driver which registered this device
+ * @map_name: name of the default keymap
+ * @rc_tab: current scan/key table
+ * @devno: unique remote control device number
+ * @raw: additional data for raw pulse/space devices
+ * @input_dev: the input child device used to communicate events to userspace
+ * @driver_type: specifies if protocol decoding is done in hardware or software
+ * @idle: used to keep track of RX state
* @allowed_protos: bitmask with the supported IR_TYPE_* protocols
* @scanmask: some hardware decoders are not capable of providing the full
* scancode to the application. As this is a hardware limit, we can't do
* anything with it. Yet, as the same keycode table can be used with other
* devices, a mask is provided to allow its usage. Drivers should generally
* leave this field in blank
+ * @priv: driver-specific data
+ * @keylock: protects the remaining members of the struct
+ * @keypressed: whether a key is currently pressed
+ * @keyup_jiffies: time (in jiffies) when the current keypress should be released
+ * @timer_keyup: timer for releasing a keypress
+ * @last_keycode: keycode of last keypress
+ * @last_scancode: scancode of last keypress
+ * @last_toggle: toggle value of last command
* @timeout: optional time after which device stops sending data
* @min_timeout: minimum timeout supported by device
* @max_timeout: maximum timeout supported by device
* @rx_resolution : resolution (in ns) of input sampler
* @tx_resolution: resolution (in ns) of output sampler
- * @priv: driver-specific data, to be used on the callbacks
* @change_protocol: allow changing the protocol used on hardware decoders
* @open: callback to allow drivers to enable polling/irq when IR input device
* is opened.
@@ -57,55 +74,50 @@ enum rc_driver_type {
* @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
* @s_rx_carrier: inform driver about carrier it is expected to handle
* @tx_ir: transmit IR
- * @s_idle: optional: enable/disable hardware idle mode, upon which,
- device doesn't interrupt host until it sees IR pulses
+ * @s_idle: enable/disable hardware idle mode, upon which,
+ * device doesn't interrupt host until it sees IR pulses
* @s_learning_mode: enable wide band receiver used for learning
* @s_carrier_report: enable carrier reports
*/
-struct ir_dev_props {
- enum rc_driver_type driver_type;
- unsigned long allowed_protos;
- u32 scanmask;
-
- u32 timeout;
- u32 min_timeout;
- u32 max_timeout;
-
- u32 rx_resolution;
- u32 tx_resolution;
-
- void *priv;
- int (*change_protocol)(void *priv, u64 ir_type);
- int (*open)(void *priv);
- void (*close)(void *priv);
- int (*s_tx_mask)(void *priv, u32 mask);
- int (*s_tx_carrier)(void *priv, u32 carrier);
- int (*s_tx_duty_cycle)(void *priv, u32 duty_cycle);
- int (*s_rx_carrier_range)(void *priv, u32 min, u32 max);
- int (*tx_ir)(void *priv, int *txbuf, u32 n);
- void (*s_idle)(void *priv, bool enable);
- int (*s_learning_mode)(void *priv, int enable);
- int (*s_carrier_report) (void *priv, int enable);
-};
-
-struct ir_input_dev {
- struct device dev; /* device */
- char *driver_name; /* Name of the driver module */
- struct ir_scancode_table rc_tab; /* scan/key table */
- unsigned long devno; /* device number */
- struct ir_dev_props *props; /* Device properties */
- struct ir_raw_event_ctrl *raw; /* for raw pulse/space events */
- struct input_dev *input_dev; /* the input device associated with this device */
+struct rc_dev {
+ struct device dev;
+ const char *input_name;
+ const char *input_phys;
+ struct input_id input_id;
+ char *driver_name;
+ const char *map_name;
+ struct ir_scancode_table rc_tab;
+ unsigned long devno;
+ struct ir_raw_event_ctrl *raw;
+ struct input_dev *input_dev;
+ enum rc_driver_type driver_type;
bool idle;
-
- /* key info - needed by IR keycode handlers */
- spinlock_t keylock; /* protects the below members */
- bool keypressed; /* current state */
- unsigned long keyup_jiffies; /* when should the current keypress be released? */
- struct timer_list timer_keyup; /* timer for releasing a keypress */
- u32 last_keycode; /* keycode of last command */
- u32 last_scancode; /* scancode of last command */
- u8 last_toggle; /* toggle of last command */
+ u64 allowed_protos;
+ u32 scanmask;
+ void *priv;
+ spinlock_t keylock;
+ bool keypressed;
+ unsigned long keyup_jiffies;
+ struct timer_list timer_keyup;
+ u32 last_keycode;
+ u32 last_scancode;
+ u8 last_toggle;
+ u32 timeout;
+ u32 min_timeout;
+ u32 max_timeout;
+ u32 rx_resolution;
+ u32 tx_resolution;
+ int (*change_protocol)(struct rc_dev *dev, u64 ir_type);
+ int (*open)(struct rc_dev *dev);
+ void (*close)(struct rc_dev *dev);
+ int (*s_tx_mask)(struct rc_dev *dev, u32 mask);
+ int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier);
+ int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle);
+ int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max);
+ int (*tx_ir)(struct rc_dev *dev, int *txbuf, u32 n);
+ void (*s_idle)(struct rc_dev *dev, bool enable);
+ int (*s_learning_mode)(struct rc_dev *dev, int enable);
+ int (*s_carrier_report) (struct rc_dev *dev, int enable);
};
enum raw_event_type {
@@ -115,52 +127,14 @@ enum raw_event_type {
IR_STOP_EVENT = (1 << 3),
};
-#define to_ir_input_dev(_attr) container_of(_attr, struct ir_input_dev, attr)
-
-int __ir_input_register(struct input_dev *dev,
- const struct ir_scancode_table *ir_codes,
- struct ir_dev_props *props,
- const char *driver_name);
-
-static inline int ir_input_register(struct input_dev *dev,
- const char *map_name,
- struct ir_dev_props *props,
- const char *driver_name) {
- struct ir_scancode_table *ir_codes;
- struct ir_input_dev *ir_dev;
- int rc;
-
- if (!map_name)
- return -EINVAL;
-
- ir_codes = get_rc_map(map_name);
- if (!ir_codes) {
- ir_codes = get_rc_map(RC_MAP_EMPTY);
+#define to_rc_dev(d) container_of(d, struct rc_dev, dev)
- if (!ir_codes)
- return -EINVAL;
- }
- rc = __ir_input_register(dev, ir_codes, props, driver_name);
- if (rc < 0)
- return -EINVAL;
-
- ir_dev = input_get_drvdata(dev);
-
- if (!rc && ir_dev->props && ir_dev->props->change_protocol)
- rc = ir_dev->props->change_protocol(ir_dev->props->priv,
- ir_codes->ir_type);
-
- return rc;
-}
-
-void ir_input_unregister(struct input_dev *input_dev);
-
-void ir_repeat(struct input_dev *dev);
-void ir_keydown(struct input_dev *dev, int scancode, u8 toggle);
-void ir_keydown_notimeout(struct input_dev *dev, int scancode, u8 toggle);
-void ir_keyup(struct input_dev *dev);
-u32 ir_g_keycode_from_table(struct input_dev *input_dev, u32 scancode);
+void ir_repeat(struct rc_dev *dev);
+void ir_keydown(struct rc_dev *dev, int scancode, u8 toggle);
+void ir_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle);
+void ir_keyup(struct rc_dev *dev);
+u32 ir_g_keycode_from_table(struct rc_dev *dev, u32 scancode);
/* From ir-raw-event.c */
struct ir_raw_event {
@@ -194,20 +168,25 @@ static inline void init_ir_raw_event(struct ir_raw_event *ev)
#define IR_MAX_DURATION 0xFFFFFFFF /* a bit more than 4 seconds */
-void ir_raw_event_handle(struct input_dev *input_dev);
-int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev);
-int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type);
-int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+struct rc_dev *rc_allocate_device(void);
+void rc_free_device(struct rc_dev *dev);
+int rc_register_device(struct rc_dev *dev);
+void rc_unregister_device(struct rc_dev *dev);
+
+void ir_raw_event_handle(struct rc_dev *dev);
+int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev);
+int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type);
+int ir_raw_event_store_with_filter(struct rc_dev *dev,
struct ir_raw_event *ev);
-void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle);
+void ir_raw_event_set_idle(struct rc_dev *dev, bool idle);
-static inline void ir_raw_event_reset(struct input_dev *input_dev)
+static inline void ir_raw_event_reset(struct rc_dev *dev)
{
DEFINE_IR_RAW_EVENT(ev);
ev.reset = true;
- ir_raw_event_store(input_dev, &ev);
- ir_raw_event_handle(input_dev);
+ ir_raw_event_store(dev, &ev);
+ ir_raw_event_handle(dev);
}
diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h
index 8c37b5e..4ee9b42 100644
--- a/include/media/ir-kbd-i2c.h
+++ b/include/media/ir-kbd-i2c.h
@@ -9,9 +9,8 @@ struct IR_i2c;
struct IR_i2c {
char *ir_codes;
-
struct i2c_client *c;
- struct input_dev *input;
+ struct rc_dev *rc;
/* Used to avoid fast repeating */
unsigned char old;
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH 6/7] ir-core: make struct rc_dev the primary interface
2010-10-29 19:08 ` [PATCH 6/7] ir-core: make struct rc_dev the primary interface David Härdeman
@ 2010-11-02 16:02 ` Jarod Wilson
2010-11-10 4:31 ` Mauro Carvalho Chehab
1 sibling, 0 replies; 18+ messages in thread
From: Jarod Wilson @ 2010-11-02 16:02 UTC (permalink / raw)
To: David Härdeman; +Cc: linux-media, mchehab
On Fri, Oct 29, 2010 at 3:08 PM, David Härdeman <david@hardeman.nu> wrote:
> This patch merges the ir_input_dev and ir_dev_props structs into a single
> struct called rc_dev. The drivers and various functions in rc-core used
> by the drivers are also changed to use rc_dev as the primary interface
> when dealing with rc-core.
>
> This means that the input_dev is abstracted away from the drivers which
> is necessary if we ever want to support multiple input devs per rc device.
>
> The new API is similar to what the input subsystem uses, i.e:
> rc_device_alloc()
> rc_device_free()
> rc_device_register()
> rc_device_unregister()
>
> Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Jarod Wilson <jarod@redhat.com>
Tested-by: Jarod Wilson <jarod@redhat.com>
Tested mceusb, streamzap, imon and nuvonton-cir.
--
Jarod Wilson
jarod@wilsonet.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 6/7] ir-core: make struct rc_dev the primary interface
2010-10-29 19:08 ` [PATCH 6/7] ir-core: make struct rc_dev the primary interface David Härdeman
2010-11-02 16:02 ` Jarod Wilson
@ 2010-11-10 4:31 ` Mauro Carvalho Chehab
2010-11-10 9:30 ` David Härdeman
1 sibling, 1 reply; 18+ messages in thread
From: Mauro Carvalho Chehab @ 2010-11-10 4:31 UTC (permalink / raw)
To: David Härdeman; +Cc: linux-media, jarod
Em 29-10-2010 17:08, David Härdeman escreveu:
> This patch merges the ir_input_dev and ir_dev_props structs into a single
> struct called rc_dev. The drivers and various functions in rc-core used
> by the drivers are also changed to use rc_dev as the primary interface
> when dealing with rc-core.
>
> This means that the input_dev is abstracted away from the drivers which
> is necessary if we ever want to support multiple input devs per rc device.
>
> The new API is similar to what the input subsystem uses, i.e:
> rc_device_alloc()
> rc_device_free()
> rc_device_register()
> rc_device_unregister()
>
David,
> + struct rc_dev *rdev;
...
> + struct rc_dev *dev; /* pointer to the parent rc_dev */
> + struct rc_dev *rc;
A quick comment: try to call this struct with the same name on all places,
avoiding to call it as just "dev". It makes harder to understand the code,
especially on complex devices that have several types of dev's. The better
is to always call it as "rc_dev".
Cheers,
Mauro
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 6/7] ir-core: make struct rc_dev the primary interface
2010-11-10 4:31 ` Mauro Carvalho Chehab
@ 2010-11-10 9:30 ` David Härdeman
0 siblings, 0 replies; 18+ messages in thread
From: David Härdeman @ 2010-11-10 9:30 UTC (permalink / raw)
To: Mauro Carvalho Chehab; +Cc: linux-media, jarod
On Wed, 10 Nov 2010 02:31:24 -0200, Mauro Carvalho Chehab
<mchehab@infradead.org> wrote:
> Em 29-10-2010 17:08, David Härdeman escreveu:
>> This patch merges the ir_input_dev and ir_dev_props structs into a
single
>> struct called rc_dev. The drivers and various functions in rc-core used
>> by the drivers are also changed to use rc_dev as the primary interface
>> when dealing with rc-core.
>>
>> This means that the input_dev is abstracted away from the drivers which
>> is necessary if we ever want to support multiple input devs per rc
>> device.
>>
>> The new API is similar to what the input subsystem uses, i.e:
>> rc_device_alloc()
>> rc_device_free()
>> rc_device_register()
>> rc_device_unregister()
>>
>
>
> David,
>
>> + struct rc_dev *rdev;
> ...
>> + struct rc_dev *dev; /* pointer to the parent rc_dev */
>
>> + struct rc_dev *rc;
>
>
> A quick comment: try to call this struct with the same name on all
places,
> avoiding to call it as just "dev". It makes harder to understand the
code,
> especially on complex devices that have several types of dev's. The
better
> is to always call it as "rc_dev".
Fair enough. I can fix that in a separate patch, or in a respin of my
original patch. But first I need to know what I should base a new patch
on...I'm confused by now
--
David Härdeman
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 7/7] rc-core: convert winbond-cir
2010-10-29 19:07 [PATCH 0/7] rc-core: ir-core to rc-core conversion David Härdeman
` (5 preceding siblings ...)
2010-10-29 19:08 ` [PATCH 6/7] ir-core: make struct rc_dev the primary interface David Härdeman
@ 2010-10-29 19:08 ` David Härdeman
2010-11-02 16:03 ` Jarod Wilson
2010-10-29 20:11 ` [PATCH 0/7] rc-core: ir-core to rc-core conversion Jarod Wilson
2010-11-01 22:07 ` David Härdeman
8 siblings, 1 reply; 18+ messages in thread
From: David Härdeman @ 2010-10-29 19:08 UTC (permalink / raw)
To: linux-media; +Cc: jarod, mchehab
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 74006 bytes --]
Move winbond-cir from drivers/input/misc/ into drivers/media/IR/
and convert it to use rc-core.
Signed-off-by: David Härdeman <david@hardeman.nu>
---
drivers/input/misc/Kconfig | 18
drivers/input/misc/Makefile | 1
drivers/input/misc/winbond-cir.c | 1608 --------------------------------------
drivers/media/IR/Kconfig | 17
drivers/media/IR/Makefile | 1
drivers/media/IR/winbond-cir.c | 934 ++++++++++++++++++++++
6 files changed, 952 insertions(+), 1627 deletions(-)
delete mode 100644 drivers/input/misc/winbond-cir.c
create mode 100644 drivers/media/IR/winbond-cir.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index b49e233..48f06ff 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -284,24 +284,6 @@ config INPUT_SGI_BTNS
To compile this driver as a module, choose M here: the
module will be called sgi_btns.
-config INPUT_WINBOND_CIR
- tristate "Winbond IR remote control"
- depends on X86 && PNP
- select NEW_LEDS
- select LEDS_CLASS
- select LEDS_TRIGGERS
- select BITREVERSE
- help
- Say Y here if you want to use the IR remote functionality found
- in some Winbond SuperI/O chips. Currently only the WPCD376I
- chip is supported (included in some Intel Media series motherboards).
-
- IR Receive and wake-on-IR from suspend and power-off is currently
- supported.
-
- To compile this driver as a module, choose M here: the module will be
- called winbond_cir.
-
config HP_SDC_RTC
tristate "HP SDC Real Time Clock"
depends on (GSC || HP300) && SERIO
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 19ccca7..2ebd297 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -37,7 +37,6 @@ obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o
obj-$(CONFIG_INPUT_TWL4030_VIBRA) += twl4030-vibra.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
-obj-$(CONFIG_INPUT_WINBOND_CIR) += winbond-cir.o
obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
diff --git a/drivers/input/misc/winbond-cir.c b/drivers/input/misc/winbond-cir.c
deleted file mode 100644
index 64f1de7..0000000
--- a/drivers/input/misc/winbond-cir.c
+++ /dev/null
@@ -1,1608 +0,0 @@
-/*
- * winbond-cir.c - Driver for the Consumer IR functionality of Winbond
- * SuperI/O chips.
- *
- * Currently supports the Winbond WPCD376i chip (PNP id WEC1022), but
- * could probably support others (Winbond WEC102X, NatSemi, etc)
- * with minor modifications.
- *
- * Original Author: David Härdeman <david@hardeman.nu>
- * Copyright (C) 2009 David Härdeman <david@hardeman.nu>
- *
- * Dedicated to Matilda, my newborn daughter, without whose loving attention
- * this driver would have been finished in half the time and with a fraction
- * of the bugs.
- *
- * Written using:
- * o Winbond WPCD376I datasheet helpfully provided by Jesse Barnes at Intel
- * o NatSemi PC87338/PC97338 datasheet (for the serial port stuff)
- * o DSDT dumps
- *
- * Supported features:
- * o RC6
- * o Wake-On-CIR functionality
- *
- * To do:
- * o Test NEC and RC5
- *
- * Left as an exercise for the reader:
- * o Learning (I have neither the hardware, nor the need)
- * o IR Transmit (ibid)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/pnp.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/pci_ids.h>
-#include <linux/io.h>
-#include <linux/bitrev.h>
-#include <linux/bitops.h>
-#include <linux/slab.h>
-
-#define DRVNAME "winbond-cir"
-
-/* CEIR Wake-Up Registers, relative to data->wbase */
-#define WBCIR_REG_WCEIR_CTL 0x03 /* CEIR Receiver Control */
-#define WBCIR_REG_WCEIR_STS 0x04 /* CEIR Receiver Status */
-#define WBCIR_REG_WCEIR_EV_EN 0x05 /* CEIR Receiver Event Enable */
-#define WBCIR_REG_WCEIR_CNTL 0x06 /* CEIR Receiver Counter Low */
-#define WBCIR_REG_WCEIR_CNTH 0x07 /* CEIR Receiver Counter High */
-#define WBCIR_REG_WCEIR_INDEX 0x08 /* CEIR Receiver Index */
-#define WBCIR_REG_WCEIR_DATA 0x09 /* CEIR Receiver Data */
-#define WBCIR_REG_WCEIR_CSL 0x0A /* CEIR Re. Compare Strlen */
-#define WBCIR_REG_WCEIR_CFG1 0x0B /* CEIR Re. Configuration 1 */
-#define WBCIR_REG_WCEIR_CFG2 0x0C /* CEIR Re. Configuration 2 */
-
-/* CEIR Enhanced Functionality Registers, relative to data->ebase */
-#define WBCIR_REG_ECEIR_CTS 0x00 /* Enhanced IR Control Status */
-#define WBCIR_REG_ECEIR_CCTL 0x01 /* Infrared Counter Control */
-#define WBCIR_REG_ECEIR_CNT_LO 0x02 /* Infrared Counter LSB */
-#define WBCIR_REG_ECEIR_CNT_HI 0x03 /* Infrared Counter MSB */
-#define WBCIR_REG_ECEIR_IREM 0x04 /* Infrared Emitter Status */
-
-/* SP3 Banked Registers, relative to data->sbase */
-#define WBCIR_REG_SP3_BSR 0x03 /* Bank Select, all banks */
- /* Bank 0 */
-#define WBCIR_REG_SP3_RXDATA 0x00 /* FIFO RX data (r) */
-#define WBCIR_REG_SP3_TXDATA 0x00 /* FIFO TX data (w) */
-#define WBCIR_REG_SP3_IER 0x01 /* Interrupt Enable */
-#define WBCIR_REG_SP3_EIR 0x02 /* Event Identification (r) */
-#define WBCIR_REG_SP3_FCR 0x02 /* FIFO Control (w) */
-#define WBCIR_REG_SP3_MCR 0x04 /* Mode Control */
-#define WBCIR_REG_SP3_LSR 0x05 /* Link Status */
-#define WBCIR_REG_SP3_MSR 0x06 /* Modem Status */
-#define WBCIR_REG_SP3_ASCR 0x07 /* Aux Status and Control */
- /* Bank 2 */
-#define WBCIR_REG_SP3_BGDL 0x00 /* Baud Divisor LSB */
-#define WBCIR_REG_SP3_BGDH 0x01 /* Baud Divisor MSB */
-#define WBCIR_REG_SP3_EXCR1 0x02 /* Extended Control 1 */
-#define WBCIR_REG_SP3_EXCR2 0x04 /* Extended Control 2 */
-#define WBCIR_REG_SP3_TXFLV 0x06 /* TX FIFO Level */
-#define WBCIR_REG_SP3_RXFLV 0x07 /* RX FIFO Level */
- /* Bank 3 */
-#define WBCIR_REG_SP3_MRID 0x00 /* Module Identification */
-#define WBCIR_REG_SP3_SH_LCR 0x01 /* LCR Shadow */
-#define WBCIR_REG_SP3_SH_FCR 0x02 /* FCR Shadow */
- /* Bank 4 */
-#define WBCIR_REG_SP3_IRCR1 0x02 /* Infrared Control 1 */
- /* Bank 5 */
-#define WBCIR_REG_SP3_IRCR2 0x04 /* Infrared Control 2 */
- /* Bank 6 */
-#define WBCIR_REG_SP3_IRCR3 0x00 /* Infrared Control 3 */
-#define WBCIR_REG_SP3_SIR_PW 0x02 /* SIR Pulse Width */
- /* Bank 7 */
-#define WBCIR_REG_SP3_IRRXDC 0x00 /* IR RX Demod Control */
-#define WBCIR_REG_SP3_IRTXMC 0x01 /* IR TX Mod Control */
-#define WBCIR_REG_SP3_RCCFG 0x02 /* CEIR Config */
-#define WBCIR_REG_SP3_IRCFG1 0x04 /* Infrared Config 1 */
-#define WBCIR_REG_SP3_IRCFG4 0x07 /* Infrared Config 4 */
-
-/*
- * Magic values follow
- */
-
-/* No interrupts for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
-#define WBCIR_IRQ_NONE 0x00
-/* RX data bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
-#define WBCIR_IRQ_RX 0x01
-/* Over/Under-flow bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
-#define WBCIR_IRQ_ERR 0x04
-/* Led enable/disable bit for WBCIR_REG_ECEIR_CTS */
-#define WBCIR_LED_ENABLE 0x80
-/* RX data available bit for WBCIR_REG_SP3_LSR */
-#define WBCIR_RX_AVAIL 0x01
-/* RX disable bit for WBCIR_REG_SP3_ASCR */
-#define WBCIR_RX_DISABLE 0x20
-/* Extended mode enable bit for WBCIR_REG_SP3_EXCR1 */
-#define WBCIR_EXT_ENABLE 0x01
-/* Select compare register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */
-#define WBCIR_REGSEL_COMPARE 0x10
-/* Select mask register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */
-#define WBCIR_REGSEL_MASK 0x20
-/* Starting address of selected register in WBCIR_REG_WCEIR_INDEX */
-#define WBCIR_REG_ADDR0 0x00
-
-/* Valid banks for the SP3 UART */
-enum wbcir_bank {
- WBCIR_BANK_0 = 0x00,
- WBCIR_BANK_1 = 0x80,
- WBCIR_BANK_2 = 0xE0,
- WBCIR_BANK_3 = 0xE4,
- WBCIR_BANK_4 = 0xE8,
- WBCIR_BANK_5 = 0xEC,
- WBCIR_BANK_6 = 0xF0,
- WBCIR_BANK_7 = 0xF4,
-};
-
-/* Supported IR Protocols */
-enum wbcir_protocol {
- IR_PROTOCOL_RC5 = 0x0,
- IR_PROTOCOL_NEC = 0x1,
- IR_PROTOCOL_RC6 = 0x2,
-};
-
-/* Misc */
-#define WBCIR_NAME "Winbond CIR"
-#define WBCIR_ID_FAMILY 0xF1 /* Family ID for the WPCD376I */
-#define WBCIR_ID_CHIP 0x04 /* Chip ID for the WPCD376I */
-#define IR_KEYPRESS_TIMEOUT 250 /* FIXME: should be per-protocol? */
-#define INVALID_SCANCODE 0x7FFFFFFF /* Invalid with all protos */
-#define WAKEUP_IOMEM_LEN 0x10 /* Wake-Up I/O Reg Len */
-#define EHFUNC_IOMEM_LEN 0x10 /* Enhanced Func I/O Reg Len */
-#define SP_IOMEM_LEN 0x08 /* Serial Port 3 (IR) Reg Len */
-#define WBCIR_MAX_IDLE_BYTES 10
-
-static DEFINE_SPINLOCK(wbcir_lock);
-static DEFINE_RWLOCK(keytable_lock);
-
-struct wbcir_key {
- u32 scancode;
- unsigned int keycode;
-};
-
-struct wbcir_keyentry {
- struct wbcir_key key;
- struct list_head list;
-};
-
-static struct wbcir_key rc6_def_keymap[] = {
- { 0x800F0400, KEY_NUMERIC_0 },
- { 0x800F0401, KEY_NUMERIC_1 },
- { 0x800F0402, KEY_NUMERIC_2 },
- { 0x800F0403, KEY_NUMERIC_3 },
- { 0x800F0404, KEY_NUMERIC_4 },
- { 0x800F0405, KEY_NUMERIC_5 },
- { 0x800F0406, KEY_NUMERIC_6 },
- { 0x800F0407, KEY_NUMERIC_7 },
- { 0x800F0408, KEY_NUMERIC_8 },
- { 0x800F0409, KEY_NUMERIC_9 },
- { 0x800F041D, KEY_NUMERIC_STAR },
- { 0x800F041C, KEY_NUMERIC_POUND },
- { 0x800F0410, KEY_VOLUMEUP },
- { 0x800F0411, KEY_VOLUMEDOWN },
- { 0x800F0412, KEY_CHANNELUP },
- { 0x800F0413, KEY_CHANNELDOWN },
- { 0x800F040E, KEY_MUTE },
- { 0x800F040D, KEY_VENDOR }, /* Vista Logo Key */
- { 0x800F041E, KEY_UP },
- { 0x800F041F, KEY_DOWN },
- { 0x800F0420, KEY_LEFT },
- { 0x800F0421, KEY_RIGHT },
- { 0x800F0422, KEY_OK },
- { 0x800F0423, KEY_ESC },
- { 0x800F040F, KEY_INFO },
- { 0x800F040A, KEY_CLEAR },
- { 0x800F040B, KEY_ENTER },
- { 0x800F045B, KEY_RED },
- { 0x800F045C, KEY_GREEN },
- { 0x800F045D, KEY_YELLOW },
- { 0x800F045E, KEY_BLUE },
- { 0x800F045A, KEY_TEXT },
- { 0x800F0427, KEY_SWITCHVIDEOMODE },
- { 0x800F040C, KEY_POWER },
- { 0x800F0450, KEY_RADIO },
- { 0x800F0448, KEY_PVR },
- { 0x800F0447, KEY_AUDIO },
- { 0x800F0426, KEY_EPG },
- { 0x800F0449, KEY_CAMERA },
- { 0x800F0425, KEY_TV },
- { 0x800F044A, KEY_VIDEO },
- { 0x800F0424, KEY_DVD },
- { 0x800F0416, KEY_PLAY },
- { 0x800F0418, KEY_PAUSE },
- { 0x800F0419, KEY_STOP },
- { 0x800F0414, KEY_FASTFORWARD },
- { 0x800F041A, KEY_NEXT },
- { 0x800F041B, KEY_PREVIOUS },
- { 0x800F0415, KEY_REWIND },
- { 0x800F0417, KEY_RECORD },
-};
-
-/* Registers and other state is protected by wbcir_lock */
-struct wbcir_data {
- unsigned long wbase; /* Wake-Up Baseaddr */
- unsigned long ebase; /* Enhanced Func. Baseaddr */
- unsigned long sbase; /* Serial Port Baseaddr */
- unsigned int irq; /* Serial Port IRQ */
-
- struct input_dev *input_dev;
- struct timer_list timer_keyup;
- struct led_trigger *rxtrigger;
- struct led_trigger *txtrigger;
- struct led_classdev led;
-
- u32 last_scancode;
- unsigned int last_keycode;
- u8 last_toggle;
- u8 keypressed;
- unsigned long keyup_jiffies;
- unsigned int idle_count;
-
- /* RX irdata and parsing state */
- unsigned long irdata[30];
- unsigned int irdata_count;
- unsigned int irdata_idle;
- unsigned int irdata_off;
- unsigned int irdata_error;
-
- /* Protected by keytable_lock */
- struct list_head keytable;
-};
-
-static enum wbcir_protocol protocol = IR_PROTOCOL_RC6;
-module_param(protocol, uint, 0444);
-MODULE_PARM_DESC(protocol, "IR protocol to use "
- "(0 = RC5, 1 = NEC, 2 = RC6A, default)");
-
-static int invert; /* default = 0 */
-module_param(invert, bool, 0444);
-MODULE_PARM_DESC(invert, "Invert the signal from the IR receiver");
-
-static unsigned int wake_sc = 0x800F040C;
-module_param(wake_sc, uint, 0644);
-MODULE_PARM_DESC(wake_sc, "Scancode of the power-on IR command");
-
-static unsigned int wake_rc6mode = 6;
-module_param(wake_rc6mode, uint, 0644);
-MODULE_PARM_DESC(wake_rc6mode, "RC6 mode for the power-on command "
- "(0 = 0, 6 = 6A, default)");
-
-
-
-/*****************************************************************************
- *
- * UTILITY FUNCTIONS
- *
- *****************************************************************************/
-
-/* Caller needs to hold wbcir_lock */
-static void
-wbcir_set_bits(unsigned long addr, u8 bits, u8 mask)
-{
- u8 val;
-
- val = inb(addr);
- val = ((val & ~mask) | (bits & mask));
- outb(val, addr);
-}
-
-/* Selects the register bank for the serial port */
-static inline void
-wbcir_select_bank(struct wbcir_data *data, enum wbcir_bank bank)
-{
- outb(bank, data->sbase + WBCIR_REG_SP3_BSR);
-}
-
-static enum led_brightness
-wbcir_led_brightness_get(struct led_classdev *led_cdev)
-{
- struct wbcir_data *data = container_of(led_cdev,
- struct wbcir_data,
- led);
-
- if (inb(data->ebase + WBCIR_REG_ECEIR_CTS) & WBCIR_LED_ENABLE)
- return LED_FULL;
- else
- return LED_OFF;
-}
-
-static void
-wbcir_led_brightness_set(struct led_classdev *led_cdev,
- enum led_brightness brightness)
-{
- struct wbcir_data *data = container_of(led_cdev,
- struct wbcir_data,
- led);
-
- wbcir_set_bits(data->ebase + WBCIR_REG_ECEIR_CTS,
- brightness == LED_OFF ? 0x00 : WBCIR_LED_ENABLE,
- WBCIR_LED_ENABLE);
-}
-
-/* Manchester encodes bits to RC6 message cells (see wbcir_parse_rc6) */
-static u8
-wbcir_to_rc6cells(u8 val)
-{
- u8 coded = 0x00;
- int i;
-
- val &= 0x0F;
- for (i = 0; i < 4; i++) {
- if (val & 0x01)
- coded |= 0x02 << (i * 2);
- else
- coded |= 0x01 << (i * 2);
- val >>= 1;
- }
-
- return coded;
-}
-
-
-
-/*****************************************************************************
- *
- * INPUT FUNCTIONS
- *
- *****************************************************************************/
-
-static unsigned int
-wbcir_do_getkeycode(struct wbcir_data *data, u32 scancode)
-{
- struct wbcir_keyentry *keyentry;
- unsigned int keycode = KEY_RESERVED;
- unsigned long flags;
-
- read_lock_irqsave(&keytable_lock, flags);
-
- list_for_each_entry(keyentry, &data->keytable, list) {
- if (keyentry->key.scancode == scancode) {
- keycode = keyentry->key.keycode;
- break;
- }
- }
-
- read_unlock_irqrestore(&keytable_lock, flags);
- return keycode;
-}
-
-static int
-wbcir_getkeycode(struct input_dev *dev,
- unsigned int scancode, unsigned int *keycode)
-{
- struct wbcir_data *data = input_get_drvdata(dev);
-
- *keycode = wbcir_do_getkeycode(data, scancode);
- return 0;
-}
-
-static int
-wbcir_setkeycode(struct input_dev *dev,
- unsigned int scancode, unsigned int keycode)
-{
- struct wbcir_data *data = input_get_drvdata(dev);
- struct wbcir_keyentry *keyentry;
- struct wbcir_keyentry *new_keyentry;
- unsigned long flags;
- unsigned int old_keycode = KEY_RESERVED;
-
- new_keyentry = kmalloc(sizeof(*new_keyentry), GFP_KERNEL);
- if (!new_keyentry)
- return -ENOMEM;
-
- write_lock_irqsave(&keytable_lock, flags);
-
- list_for_each_entry(keyentry, &data->keytable, list) {
- if (keyentry->key.scancode != scancode)
- continue;
-
- old_keycode = keyentry->key.keycode;
- keyentry->key.keycode = keycode;
-
- if (keyentry->key.keycode == KEY_RESERVED) {
- list_del(&keyentry->list);
- kfree(keyentry);
- }
-
- break;
- }
-
- set_bit(keycode, dev->keybit);
-
- if (old_keycode == KEY_RESERVED) {
- new_keyentry->key.scancode = scancode;
- new_keyentry->key.keycode = keycode;
- list_add(&new_keyentry->list, &data->keytable);
- } else {
- kfree(new_keyentry);
- clear_bit(old_keycode, dev->keybit);
- list_for_each_entry(keyentry, &data->keytable, list) {
- if (keyentry->key.keycode == old_keycode) {
- set_bit(old_keycode, dev->keybit);
- break;
- }
- }
- }
-
- write_unlock_irqrestore(&keytable_lock, flags);
- return 0;
-}
-
-/*
- * Timer function to report keyup event some time after keydown is
- * reported by the ISR.
- */
-static void
-wbcir_keyup(unsigned long cookie)
-{
- struct wbcir_data *data = (struct wbcir_data *)cookie;
- unsigned long flags;
-
- /*
- * data->keyup_jiffies is used to prevent a race condition if a
- * hardware interrupt occurs at this point and the keyup timer
- * event is moved further into the future as a result.
- *
- * The timer will then be reactivated and this function called
- * again in the future. We need to exit gracefully in that case
- * to allow the input subsystem to do its auto-repeat magic or
- * a keyup event might follow immediately after the keydown.
- */
-
- spin_lock_irqsave(&wbcir_lock, flags);
-
- if (time_is_after_eq_jiffies(data->keyup_jiffies) && data->keypressed) {
- data->keypressed = 0;
- led_trigger_event(data->rxtrigger, LED_OFF);
- input_report_key(data->input_dev, data->last_keycode, 0);
- input_sync(data->input_dev);
- }
-
- spin_unlock_irqrestore(&wbcir_lock, flags);
-}
-
-static void
-wbcir_keydown(struct wbcir_data *data, u32 scancode, u8 toggle)
-{
- unsigned int keycode;
-
- /* Repeat? */
- if (data->last_scancode == scancode &&
- data->last_toggle == toggle &&
- data->keypressed)
- goto set_timer;
- data->last_scancode = scancode;
-
- /* Do we need to release an old keypress? */
- if (data->keypressed) {
- input_report_key(data->input_dev, data->last_keycode, 0);
- input_sync(data->input_dev);
- data->keypressed = 0;
- }
-
- /* Report scancode */
- input_event(data->input_dev, EV_MSC, MSC_SCAN, (int)scancode);
-
- /* Do we know this scancode? */
- keycode = wbcir_do_getkeycode(data, scancode);
- if (keycode == KEY_RESERVED)
- goto set_timer;
-
- /* Register a keypress */
- input_report_key(data->input_dev, keycode, 1);
- data->keypressed = 1;
- data->last_keycode = keycode;
- data->last_toggle = toggle;
-
-set_timer:
- input_sync(data->input_dev);
- led_trigger_event(data->rxtrigger,
- data->keypressed ? LED_FULL : LED_OFF);
- data->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
- mod_timer(&data->timer_keyup, data->keyup_jiffies);
-}
-
-
-
-/*****************************************************************************
- *
- * IR PARSING FUNCTIONS
- *
- *****************************************************************************/
-
-/* Resets all irdata */
-static void
-wbcir_reset_irdata(struct wbcir_data *data)
-{
- memset(data->irdata, 0, sizeof(data->irdata));
- data->irdata_count = 0;
- data->irdata_off = 0;
- data->irdata_error = 0;
- data->idle_count = 0;
-}
-
-/* Adds one bit of irdata */
-static void
-add_irdata_bit(struct wbcir_data *data, int set)
-{
- if (data->irdata_count >= sizeof(data->irdata) * 8) {
- data->irdata_error = 1;
- return;
- }
-
- if (set)
- __set_bit(data->irdata_count, data->irdata);
- data->irdata_count++;
-}
-
-/* Gets count bits of irdata */
-static u16
-get_bits(struct wbcir_data *data, int count)
-{
- u16 val = 0x0;
-
- if (data->irdata_count - data->irdata_off < count) {
- data->irdata_error = 1;
- return 0x0;
- }
-
- while (count > 0) {
- val <<= 1;
- if (test_bit(data->irdata_off, data->irdata))
- val |= 0x1;
- count--;
- data->irdata_off++;
- }
-
- return val;
-}
-
-/* Reads 16 cells and converts them to a byte */
-static u8
-wbcir_rc6cells_to_byte(struct wbcir_data *data)
-{
- u16 raw = get_bits(data, 16);
- u8 val = 0x00;
- int bit;
-
- for (bit = 0; bit < 8; bit++) {
- switch (raw & 0x03) {
- case 0x01:
- break;
- case 0x02:
- val |= (0x01 << bit);
- break;
- default:
- data->irdata_error = 1;
- break;
- }
- raw >>= 2;
- }
-
- return val;
-}
-
-/* Decodes a number of bits from raw RC5 data */
-static u8
-wbcir_get_rc5bits(struct wbcir_data *data, unsigned int count)
-{
- u16 raw = get_bits(data, count * 2);
- u8 val = 0x00;
- int bit;
-
- for (bit = 0; bit < count; bit++) {
- switch (raw & 0x03) {
- case 0x01:
- val |= (0x01 << bit);
- break;
- case 0x02:
- break;
- default:
- data->irdata_error = 1;
- break;
- }
- raw >>= 2;
- }
-
- return val;
-}
-
-static void
-wbcir_parse_rc6(struct device *dev, struct wbcir_data *data)
-{
- /*
- * Normal bits are manchester coded as follows:
- * cell0 + cell1 = logic "0"
- * cell1 + cell0 = logic "1"
- *
- * The IR pulse has the following components:
- *
- * Leader - 6 * cell1 - discarded
- * Gap - 2 * cell0 - discarded
- * Start bit - Normal Coding - always "1"
- * Mode Bit 2 - 0 - Normal Coding
- * Toggle bit - Normal Coding with double bit time,
- * e.g. cell0 + cell0 + cell1 + cell1
- * means logic "0".
- *
- * The rest depends on the mode, the following modes are known:
- *
- * MODE 0:
- * Address Bit 7 - 0 - Normal Coding
- * Command Bit 7 - 0 - Normal Coding
- *
- * MODE 6:
- * The above Toggle Bit is used as a submode bit, 0 = A, 1 = B.
- * Submode B is for pointing devices, only remotes using submode A
- * are supported.
- *
- * Customer range bit - 0 => Customer = 7 bits, 0...127
- * 1 => Customer = 15 bits, 32768...65535
- * Customer Bits - Normal Coding
- *
- * Customer codes are allocated by Philips. The rest of the bits
- * are customer dependent. The following is commonly used (and the
- * only supported config):
- *
- * Toggle Bit - Normal Coding
- * Address Bit 6 - 0 - Normal Coding
- * Command Bit 7 - 0 - Normal Coding
- *
- * All modes are followed by at least 6 * cell0.
- *
- * MODE 0 msglen:
- * 1 * 2 (start bit) + 3 * 2 (mode) + 2 * 2 (toggle) +
- * 8 * 2 (address) + 8 * 2 (command) =
- * 44 cells
- *
- * MODE 6A msglen:
- * 1 * 2 (start bit) + 3 * 2 (mode) + 2 * 2 (submode) +
- * 1 * 2 (customer range bit) + 7/15 * 2 (customer bits) +
- * 1 * 2 (toggle bit) + 7 * 2 (address) + 8 * 2 (command) =
- * 60 - 76 cells
- */
- u8 mode;
- u8 toggle;
- u16 customer = 0x0;
- u8 address;
- u8 command;
- u32 scancode;
-
- /* Leader mark */
- while (get_bits(data, 1) && !data->irdata_error)
- /* Do nothing */;
-
- /* Leader space */
- if (get_bits(data, 1)) {
- dev_dbg(dev, "RC6 - Invalid leader space\n");
- return;
- }
-
- /* Start bit */
- if (get_bits(data, 2) != 0x02) {
- dev_dbg(dev, "RC6 - Invalid start bit\n");
- return;
- }
-
- /* Mode */
- mode = get_bits(data, 6);
- switch (mode) {
- case 0x15: /* 010101 = b000 */
- mode = 0;
- break;
- case 0x29: /* 101001 = b110 */
- mode = 6;
- break;
- default:
- dev_dbg(dev, "RC6 - Invalid mode\n");
- return;
- }
-
- /* Toggle bit / Submode bit */
- toggle = get_bits(data, 4);
- switch (toggle) {
- case 0x03:
- toggle = 0;
- break;
- case 0x0C:
- toggle = 1;
- break;
- default:
- dev_dbg(dev, "RC6 - Toggle bit error\n");
- break;
- }
-
- /* Customer */
- if (mode == 6) {
- if (toggle != 0) {
- dev_dbg(dev, "RC6B - Not Supported\n");
- return;
- }
-
- customer = wbcir_rc6cells_to_byte(data);
-
- if (customer & 0x80) {
- /* 15 bit customer value */
- customer <<= 8;
- customer |= wbcir_rc6cells_to_byte(data);
- }
- }
-
- /* Address */
- address = wbcir_rc6cells_to_byte(data);
- if (mode == 6) {
- toggle = address >> 7;
- address &= 0x7F;
- }
-
- /* Command */
- command = wbcir_rc6cells_to_byte(data);
-
- /* Create scancode */
- scancode = command;
- scancode |= address << 8;
- scancode |= customer << 16;
-
- /* Last sanity check */
- if (data->irdata_error) {
- dev_dbg(dev, "RC6 - Cell error(s)\n");
- return;
- }
-
- dev_dbg(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X "
- "toggle %u mode %u scan 0x%08X\n",
- address,
- command,
- customer,
- (unsigned int)toggle,
- (unsigned int)mode,
- scancode);
-
- wbcir_keydown(data, scancode, toggle);
-}
-
-static void
-wbcir_parse_rc5(struct device *dev, struct wbcir_data *data)
-{
- /*
- * Bits are manchester coded as follows:
- * cell1 + cell0 = logic "0"
- * cell0 + cell1 = logic "1"
- * (i.e. the reverse of RC6)
- *
- * Start bit 1 - "1" - discarded
- * Start bit 2 - Must be inverted to get command bit 6
- * Toggle bit
- * Address Bit 4 - 0
- * Command Bit 5 - 0
- */
- u8 toggle;
- u8 address;
- u8 command;
- u32 scancode;
-
- /* Start bit 1 */
- if (!get_bits(data, 1)) {
- dev_dbg(dev, "RC5 - Invalid start bit\n");
- return;
- }
-
- /* Start bit 2 */
- if (!wbcir_get_rc5bits(data, 1))
- command = 0x40;
- else
- command = 0x00;
-
- toggle = wbcir_get_rc5bits(data, 1);
- address = wbcir_get_rc5bits(data, 5);
- command |= wbcir_get_rc5bits(data, 6);
- scancode = address << 7 | command;
-
- /* Last sanity check */
- if (data->irdata_error) {
- dev_dbg(dev, "RC5 - Invalid message\n");
- return;
- }
-
- dev_dbg(dev, "IR-RC5 ad %u cm %u t %u s %u\n",
- (unsigned int)address,
- (unsigned int)command,
- (unsigned int)toggle,
- (unsigned int)scancode);
-
- wbcir_keydown(data, scancode, toggle);
-}
-
-static void
-wbcir_parse_nec(struct device *dev, struct wbcir_data *data)
-{
- /*
- * Each bit represents 560 us.
- *
- * Leader - 9 ms burst
- * Gap - 4.5 ms silence
- * Address1 bit 0 - 7 - Address 1
- * Address2 bit 0 - 7 - Address 2
- * Command1 bit 0 - 7 - Command 1
- * Command2 bit 0 - 7 - Command 2
- *
- * Note the bit order!
- *
- * With the old NEC protocol, Address2 was the inverse of Address1
- * and Command2 was the inverse of Command1 and were used as
- * an error check.
- *
- * With NEC extended, Address1 is the LSB of the Address and
- * Address2 is the MSB, Command parsing remains unchanged.
- *
- * A repeat message is coded as:
- * Leader - 9 ms burst
- * Gap - 2.25 ms silence
- * Repeat - 560 us active
- */
- u8 address1;
- u8 address2;
- u8 command1;
- u8 command2;
- u16 address;
- u32 scancode;
-
- /* Leader mark */
- while (get_bits(data, 1) && !data->irdata_error)
- /* Do nothing */;
-
- /* Leader space */
- if (get_bits(data, 4)) {
- dev_dbg(dev, "NEC - Invalid leader space\n");
- return;
- }
-
- /* Repeat? */
- if (get_bits(data, 1)) {
- if (!data->keypressed) {
- dev_dbg(dev, "NEC - Stray repeat message\n");
- return;
- }
-
- dev_dbg(dev, "IR-NEC repeat s %u\n",
- (unsigned int)data->last_scancode);
-
- wbcir_keydown(data, data->last_scancode, data->last_toggle);
- return;
- }
-
- /* Remaining leader space */
- if (get_bits(data, 3)) {
- dev_dbg(dev, "NEC - Invalid leader space\n");
- return;
- }
-
- address1 = bitrev8(get_bits(data, 8));
- address2 = bitrev8(get_bits(data, 8));
- command1 = bitrev8(get_bits(data, 8));
- command2 = bitrev8(get_bits(data, 8));
-
- /* Sanity check */
- if (data->irdata_error) {
- dev_dbg(dev, "NEC - Invalid message\n");
- return;
- }
-
- /* Check command validity */
- if (command1 != ~command2) {
- dev_dbg(dev, "NEC - Command bytes mismatch\n");
- return;
- }
-
- /* Check for extended NEC protocol */
- address = address1;
- if (address1 != ~address2)
- address |= address2 << 8;
-
- scancode = address << 8 | command1;
-
- dev_dbg(dev, "IR-NEC ad %u cm %u s %u\n",
- (unsigned int)address,
- (unsigned int)command1,
- (unsigned int)scancode);
-
- wbcir_keydown(data, scancode, !data->last_toggle);
-}
-
-
-
-/*****************************************************************************
- *
- * INTERRUPT FUNCTIONS
- *
- *****************************************************************************/
-
-static irqreturn_t
-wbcir_irq_handler(int irqno, void *cookie)
-{
- struct pnp_dev *device = cookie;
- struct wbcir_data *data = pnp_get_drvdata(device);
- struct device *dev = &device->dev;
- u8 status;
- unsigned long flags;
- u8 irdata[8];
- int i;
- unsigned int hw;
-
- spin_lock_irqsave(&wbcir_lock, flags);
-
- wbcir_select_bank(data, WBCIR_BANK_0);
-
- status = inb(data->sbase + WBCIR_REG_SP3_EIR);
-
- if (!(status & (WBCIR_IRQ_RX | WBCIR_IRQ_ERR))) {
- spin_unlock_irqrestore(&wbcir_lock, flags);
- return IRQ_NONE;
- }
-
- if (status & WBCIR_IRQ_ERR)
- data->irdata_error = 1;
-
- if (!(status & WBCIR_IRQ_RX))
- goto out;
-
- /* Since RXHDLEV is set, at least 8 bytes are in the FIFO */
- insb(data->sbase + WBCIR_REG_SP3_RXDATA, &irdata[0], 8);
-
- for (i = 0; i < sizeof(irdata); i++) {
- hw = hweight8(irdata[i]);
- if (hw > 4)
- add_irdata_bit(data, 0);
- else
- add_irdata_bit(data, 1);
-
- if (hw == 8)
- data->idle_count++;
- else
- data->idle_count = 0;
- }
-
- if (data->idle_count > WBCIR_MAX_IDLE_BYTES) {
- /* Set RXINACTIVE... */
- outb(WBCIR_RX_DISABLE, data->sbase + WBCIR_REG_SP3_ASCR);
-
- /* ...and drain the FIFO */
- while (inb(data->sbase + WBCIR_REG_SP3_LSR) & WBCIR_RX_AVAIL)
- inb(data->sbase + WBCIR_REG_SP3_RXDATA);
-
- dev_dbg(dev, "IRDATA:\n");
- for (i = 0; i < data->irdata_count; i += BITS_PER_LONG)
- dev_dbg(dev, "0x%08lX\n", data->irdata[i/BITS_PER_LONG]);
-
- switch (protocol) {
- case IR_PROTOCOL_RC5:
- wbcir_parse_rc5(dev, data);
- break;
- case IR_PROTOCOL_RC6:
- wbcir_parse_rc6(dev, data);
- break;
- case IR_PROTOCOL_NEC:
- wbcir_parse_nec(dev, data);
- break;
- }
-
- wbcir_reset_irdata(data);
- }
-
-out:
- spin_unlock_irqrestore(&wbcir_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-
-/*****************************************************************************
- *
- * SETUP/INIT/SUSPEND/RESUME FUNCTIONS
- *
- *****************************************************************************/
-
-static void
-wbcir_shutdown(struct pnp_dev *device)
-{
- struct device *dev = &device->dev;
- struct wbcir_data *data = pnp_get_drvdata(device);
- int do_wake = 1;
- u8 match[11];
- u8 mask[11];
- u8 rc6_csl = 0;
- int i;
-
- memset(match, 0, sizeof(match));
- memset(mask, 0, sizeof(mask));
-
- if (wake_sc == INVALID_SCANCODE || !device_may_wakeup(dev)) {
- do_wake = 0;
- goto finish;
- }
-
- switch (protocol) {
- case IR_PROTOCOL_RC5:
- if (wake_sc > 0xFFF) {
- do_wake = 0;
- dev_err(dev, "RC5 - Invalid wake scancode\n");
- break;
- }
-
- /* Mask = 13 bits, ex toggle */
- mask[0] = 0xFF;
- mask[1] = 0x17;
-
- match[0] = (wake_sc & 0x003F); /* 6 command bits */
- match[0] |= (wake_sc & 0x0180) >> 1; /* 2 address bits */
- match[1] = (wake_sc & 0x0E00) >> 9; /* 3 address bits */
- if (!(wake_sc & 0x0040)) /* 2nd start bit */
- match[1] |= 0x10;
-
- break;
-
- case IR_PROTOCOL_NEC:
- if (wake_sc > 0xFFFFFF) {
- do_wake = 0;
- dev_err(dev, "NEC - Invalid wake scancode\n");
- break;
- }
-
- mask[0] = mask[1] = mask[2] = mask[3] = 0xFF;
-
- match[1] = bitrev8((wake_sc & 0xFF));
- match[0] = ~match[1];
-
- match[3] = bitrev8((wake_sc & 0xFF00) >> 8);
- if (wake_sc > 0xFFFF)
- match[2] = bitrev8((wake_sc & 0xFF0000) >> 16);
- else
- match[2] = ~match[3];
-
- break;
-
- case IR_PROTOCOL_RC6:
-
- if (wake_rc6mode == 0) {
- if (wake_sc > 0xFFFF) {
- do_wake = 0;
- dev_err(dev, "RC6 - Invalid wake scancode\n");
- break;
- }
-
- /* Command */
- match[0] = wbcir_to_rc6cells(wake_sc >> 0);
- mask[0] = 0xFF;
- match[1] = wbcir_to_rc6cells(wake_sc >> 4);
- mask[1] = 0xFF;
-
- /* Address */
- match[2] = wbcir_to_rc6cells(wake_sc >> 8);
- mask[2] = 0xFF;
- match[3] = wbcir_to_rc6cells(wake_sc >> 12);
- mask[3] = 0xFF;
-
- /* Header */
- match[4] = 0x50; /* mode1 = mode0 = 0, ignore toggle */
- mask[4] = 0xF0;
- match[5] = 0x09; /* start bit = 1, mode2 = 0 */
- mask[5] = 0x0F;
-
- rc6_csl = 44;
-
- } else if (wake_rc6mode == 6) {
- i = 0;
-
- /* Command */
- match[i] = wbcir_to_rc6cells(wake_sc >> 0);
- mask[i++] = 0xFF;
- match[i] = wbcir_to_rc6cells(wake_sc >> 4);
- mask[i++] = 0xFF;
-
- /* Address + Toggle */
- match[i] = wbcir_to_rc6cells(wake_sc >> 8);
- mask[i++] = 0xFF;
- match[i] = wbcir_to_rc6cells(wake_sc >> 12);
- mask[i++] = 0x3F;
-
- /* Customer bits 7 - 0 */
- match[i] = wbcir_to_rc6cells(wake_sc >> 16);
- mask[i++] = 0xFF;
- match[i] = wbcir_to_rc6cells(wake_sc >> 20);
- mask[i++] = 0xFF;
-
- if (wake_sc & 0x80000000) {
- /* Customer range bit and bits 15 - 8 */
- match[i] = wbcir_to_rc6cells(wake_sc >> 24);
- mask[i++] = 0xFF;
- match[i] = wbcir_to_rc6cells(wake_sc >> 28);
- mask[i++] = 0xFF;
- rc6_csl = 76;
- } else if (wake_sc <= 0x007FFFFF) {
- rc6_csl = 60;
- } else {
- do_wake = 0;
- dev_err(dev, "RC6 - Invalid wake scancode\n");
- break;
- }
-
- /* Header */
- match[i] = 0x93; /* mode1 = mode0 = 1, submode = 0 */
- mask[i++] = 0xFF;
- match[i] = 0x0A; /* start bit = 1, mode2 = 1 */
- mask[i++] = 0x0F;
-
- } else {
- do_wake = 0;
- dev_err(dev, "RC6 - Invalid wake mode\n");
- }
-
- break;
-
- default:
- do_wake = 0;
- break;
- }
-
-finish:
- if (do_wake) {
- /* Set compare and compare mask */
- wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_INDEX,
- WBCIR_REGSEL_COMPARE | WBCIR_REG_ADDR0,
- 0x3F);
- outsb(data->wbase + WBCIR_REG_WCEIR_DATA, match, 11);
- wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_INDEX,
- WBCIR_REGSEL_MASK | WBCIR_REG_ADDR0,
- 0x3F);
- outsb(data->wbase + WBCIR_REG_WCEIR_DATA, mask, 11);
-
- /* RC6 Compare String Len */
- outb(rc6_csl, data->wbase + WBCIR_REG_WCEIR_CSL);
-
- /* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
- wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17);
-
- /* Clear BUFF_EN, Clear END_EN, Set MATCH_EN */
- wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x01, 0x07);
-
- /* Set CEIR_EN */
- wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x01, 0x01);
-
- } else {
- /* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */
- wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
-
- /* Clear CEIR_EN */
- wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01);
- }
-
- /* Disable interrupts */
- wbcir_select_bank(data, WBCIR_BANK_0);
- outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
-
- /*
- * ACPI will set the HW disable bit for SP3 which means that the
- * output signals are left in an undefined state which may cause
- * spurious interrupts which we need to ignore until the hardware
- * is reinitialized.
- */
- disable_irq(data->irq);
-}
-
-static int
-wbcir_suspend(struct pnp_dev *device, pm_message_t state)
-{
- wbcir_shutdown(device);
- return 0;
-}
-
-static void
-wbcir_init_hw(struct wbcir_data *data)
-{
- u8 tmp;
-
- /* Disable interrupts */
- wbcir_select_bank(data, WBCIR_BANK_0);
- outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
-
- /* Set PROT_SEL, RX_INV, Clear CEIR_EN (needed for the led) */
- tmp = protocol << 4;
- if (invert)
- tmp |= 0x08;
- outb(tmp, data->wbase + WBCIR_REG_WCEIR_CTL);
-
- /* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
- wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17);
-
- /* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */
- wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
-
- /* Set RC5 cell time to correspond to 36 kHz */
- wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CFG1, 0x4A, 0x7F);
-
- /* Set IRTX_INV */
- if (invert)
- outb(0x04, data->ebase + WBCIR_REG_ECEIR_CCTL);
- else
- outb(0x00, data->ebase + WBCIR_REG_ECEIR_CCTL);
-
- /*
- * Clear IR LED, set SP3 clock to 24Mhz
- * set SP3_IRRX_SW to binary 01, helpfully not documented
- */
- outb(0x10, data->ebase + WBCIR_REG_ECEIR_CTS);
-
- /* Enable extended mode */
- wbcir_select_bank(data, WBCIR_BANK_2);
- outb(WBCIR_EXT_ENABLE, data->sbase + WBCIR_REG_SP3_EXCR1);
-
- /*
- * Configure baud generator, IR data will be sampled at
- * a bitrate of: (24Mhz * prescaler) / (divisor * 16).
- *
- * The ECIR registers include a flag to change the
- * 24Mhz clock freq to 48Mhz.
- *
- * It's not documented in the specs, but fifo levels
- * other than 16 seems to be unsupported.
- */
-
- /* prescaler 1.0, tx/rx fifo lvl 16 */
- outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2);
-
- /* Set baud divisor to generate one byte per bit/cell */
- switch (protocol) {
- case IR_PROTOCOL_RC5:
- outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL);
- break;
- case IR_PROTOCOL_RC6:
- outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL);
- break;
- case IR_PROTOCOL_NEC:
- outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL);
- break;
- }
- outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
-
- /* Set CEIR mode */
- wbcir_select_bank(data, WBCIR_BANK_0);
- outb(0xC0, data->sbase + WBCIR_REG_SP3_MCR);
- inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */
- inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */
-
- /* Disable RX demod, run-length encoding/decoding, set freq span */
- wbcir_select_bank(data, WBCIR_BANK_7);
- outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG);
-
- /* Disable timer */
- wbcir_select_bank(data, WBCIR_BANK_4);
- outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR1);
-
- /* Enable MSR interrupt, Clear AUX_IRX */
- wbcir_select_bank(data, WBCIR_BANK_5);
- outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR2);
-
- /* Disable CRC */
- wbcir_select_bank(data, WBCIR_BANK_6);
- outb(0x20, data->sbase + WBCIR_REG_SP3_IRCR3);
-
- /* Set RX/TX (de)modulation freq, not really used */
- wbcir_select_bank(data, WBCIR_BANK_7);
- outb(0xF2, data->sbase + WBCIR_REG_SP3_IRRXDC);
- outb(0x69, data->sbase + WBCIR_REG_SP3_IRTXMC);
-
- /* Set invert and pin direction */
- if (invert)
- outb(0x10, data->sbase + WBCIR_REG_SP3_IRCFG4);
- else
- outb(0x00, data->sbase + WBCIR_REG_SP3_IRCFG4);
-
- /* Set FIFO thresholds (RX = 8, TX = 3), reset RX/TX */
- wbcir_select_bank(data, WBCIR_BANK_0);
- outb(0x97, data->sbase + WBCIR_REG_SP3_FCR);
-
- /* Clear AUX status bits */
- outb(0xE0, data->sbase + WBCIR_REG_SP3_ASCR);
-
- /* Enable interrupts */
- wbcir_reset_irdata(data);
- outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER);
-}
-
-static int
-wbcir_resume(struct pnp_dev *device)
-{
- struct wbcir_data *data = pnp_get_drvdata(device);
-
- wbcir_init_hw(data);
- enable_irq(data->irq);
-
- return 0;
-}
-
-static int __devinit
-wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
-{
- struct device *dev = &device->dev;
- struct wbcir_data *data;
- int err;
-
- if (!(pnp_port_len(device, 0) == EHFUNC_IOMEM_LEN &&
- pnp_port_len(device, 1) == WAKEUP_IOMEM_LEN &&
- pnp_port_len(device, 2) == SP_IOMEM_LEN)) {
- dev_err(dev, "Invalid resources\n");
- return -ENODEV;
- }
-
- data = kzalloc(sizeof(*data), GFP_KERNEL);
- if (!data) {
- err = -ENOMEM;
- goto exit;
- }
-
- pnp_set_drvdata(device, data);
-
- data->ebase = pnp_port_start(device, 0);
- data->wbase = pnp_port_start(device, 1);
- data->sbase = pnp_port_start(device, 2);
- data->irq = pnp_irq(device, 0);
-
- if (data->wbase == 0 || data->ebase == 0 ||
- data->sbase == 0 || data->irq == 0) {
- err = -ENODEV;
- dev_err(dev, "Invalid resources\n");
- goto exit_free_data;
- }
-
- dev_dbg(&device->dev, "Found device "
- "(w: 0x%lX, e: 0x%lX, s: 0x%lX, i: %u)\n",
- data->wbase, data->ebase, data->sbase, data->irq);
-
- if (!request_region(data->wbase, WAKEUP_IOMEM_LEN, DRVNAME)) {
- dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
- data->wbase, data->wbase + WAKEUP_IOMEM_LEN - 1);
- err = -EBUSY;
- goto exit_free_data;
- }
-
- if (!request_region(data->ebase, EHFUNC_IOMEM_LEN, DRVNAME)) {
- dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
- data->ebase, data->ebase + EHFUNC_IOMEM_LEN - 1);
- err = -EBUSY;
- goto exit_release_wbase;
- }
-
- if (!request_region(data->sbase, SP_IOMEM_LEN, DRVNAME)) {
- dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
- data->sbase, data->sbase + SP_IOMEM_LEN - 1);
- err = -EBUSY;
- goto exit_release_ebase;
- }
-
- err = request_irq(data->irq, wbcir_irq_handler,
- IRQF_DISABLED, DRVNAME, device);
- if (err) {
- dev_err(dev, "Failed to claim IRQ %u\n", data->irq);
- err = -EBUSY;
- goto exit_release_sbase;
- }
-
- led_trigger_register_simple("cir-tx", &data->txtrigger);
- if (!data->txtrigger) {
- err = -ENOMEM;
- goto exit_free_irq;
- }
-
- led_trigger_register_simple("cir-rx", &data->rxtrigger);
- if (!data->rxtrigger) {
- err = -ENOMEM;
- goto exit_unregister_txtrigger;
- }
-
- data->led.name = "cir::activity";
- data->led.default_trigger = "cir-rx";
- data->led.brightness_set = wbcir_led_brightness_set;
- data->led.brightness_get = wbcir_led_brightness_get;
- err = led_classdev_register(&device->dev, &data->led);
- if (err)
- goto exit_unregister_rxtrigger;
-
- data->input_dev = input_allocate_device();
- if (!data->input_dev) {
- err = -ENOMEM;
- goto exit_unregister_led;
- }
-
- data->input_dev->evbit[0] = BIT(EV_KEY);
- data->input_dev->name = WBCIR_NAME;
- data->input_dev->phys = "wbcir/cir0";
- data->input_dev->id.bustype = BUS_HOST;
- data->input_dev->id.vendor = PCI_VENDOR_ID_WINBOND;
- data->input_dev->id.product = WBCIR_ID_FAMILY;
- data->input_dev->id.version = WBCIR_ID_CHIP;
- data->input_dev->getkeycode = wbcir_getkeycode;
- data->input_dev->setkeycode = wbcir_setkeycode;
- input_set_capability(data->input_dev, EV_MSC, MSC_SCAN);
- input_set_drvdata(data->input_dev, data);
-
- err = input_register_device(data->input_dev);
- if (err)
- goto exit_free_input;
-
- data->last_scancode = INVALID_SCANCODE;
- INIT_LIST_HEAD(&data->keytable);
- setup_timer(&data->timer_keyup, wbcir_keyup, (unsigned long)data);
-
- /* Load default keymaps */
- if (protocol == IR_PROTOCOL_RC6) {
- int i;
- for (i = 0; i < ARRAY_SIZE(rc6_def_keymap); i++) {
- err = wbcir_setkeycode(data->input_dev,
- (int)rc6_def_keymap[i].scancode,
- (int)rc6_def_keymap[i].keycode);
- if (err)
- goto exit_unregister_keys;
- }
- }
-
- device_init_wakeup(&device->dev, 1);
-
- wbcir_init_hw(data);
-
- return 0;
-
-exit_unregister_keys:
- if (!list_empty(&data->keytable)) {
- struct wbcir_keyentry *key;
- struct wbcir_keyentry *keytmp;
-
- list_for_each_entry_safe(key, keytmp, &data->keytable, list) {
- list_del(&key->list);
- kfree(key);
- }
- }
- input_unregister_device(data->input_dev);
- /* Can't call input_free_device on an unregistered device */
- data->input_dev = NULL;
-exit_free_input:
- input_free_device(data->input_dev);
-exit_unregister_led:
- led_classdev_unregister(&data->led);
-exit_unregister_rxtrigger:
- led_trigger_unregister_simple(data->rxtrigger);
-exit_unregister_txtrigger:
- led_trigger_unregister_simple(data->txtrigger);
-exit_free_irq:
- free_irq(data->irq, device);
-exit_release_sbase:
- release_region(data->sbase, SP_IOMEM_LEN);
-exit_release_ebase:
- release_region(data->ebase, EHFUNC_IOMEM_LEN);
-exit_release_wbase:
- release_region(data->wbase, WAKEUP_IOMEM_LEN);
-exit_free_data:
- kfree(data);
- pnp_set_drvdata(device, NULL);
-exit:
- return err;
-}
-
-static void __devexit
-wbcir_remove(struct pnp_dev *device)
-{
- struct wbcir_data *data = pnp_get_drvdata(device);
- struct wbcir_keyentry *key;
- struct wbcir_keyentry *keytmp;
-
- /* Disable interrupts */
- wbcir_select_bank(data, WBCIR_BANK_0);
- outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
-
- del_timer_sync(&data->timer_keyup);
-
- free_irq(data->irq, device);
-
- /* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
- wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17);
-
- /* Clear CEIR_EN */
- wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01);
-
- /* Clear BUFF_EN, END_EN, MATCH_EN */
- wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
-
- /* This will generate a keyup event if necessary */
- input_unregister_device(data->input_dev);
-
- led_trigger_unregister_simple(data->rxtrigger);
- led_trigger_unregister_simple(data->txtrigger);
- led_classdev_unregister(&data->led);
-
- /* This is ok since &data->led isn't actually used */
- wbcir_led_brightness_set(&data->led, LED_OFF);
-
- release_region(data->wbase, WAKEUP_IOMEM_LEN);
- release_region(data->ebase, EHFUNC_IOMEM_LEN);
- release_region(data->sbase, SP_IOMEM_LEN);
-
- list_for_each_entry_safe(key, keytmp, &data->keytable, list) {
- list_del(&key->list);
- kfree(key);
- }
-
- kfree(data);
-
- pnp_set_drvdata(device, NULL);
-}
-
-static const struct pnp_device_id wbcir_ids[] = {
- { "WEC1022", 0 },
- { "", 0 }
-};
-MODULE_DEVICE_TABLE(pnp, wbcir_ids);
-
-static struct pnp_driver wbcir_driver = {
- .name = WBCIR_NAME,
- .id_table = wbcir_ids,
- .probe = wbcir_probe,
- .remove = __devexit_p(wbcir_remove),
- .suspend = wbcir_suspend,
- .resume = wbcir_resume,
- .shutdown = wbcir_shutdown
-};
-
-static int __init
-wbcir_init(void)
-{
- int ret;
-
- switch (protocol) {
- case IR_PROTOCOL_RC5:
- case IR_PROTOCOL_NEC:
- case IR_PROTOCOL_RC6:
- break;
- default:
- printk(KERN_ERR DRVNAME ": Invalid protocol argument\n");
- return -EINVAL;
- }
-
- ret = pnp_register_driver(&wbcir_driver);
- if (ret)
- printk(KERN_ERR DRVNAME ": Unable to register driver\n");
-
- return ret;
-}
-
-static void __exit
-wbcir_exit(void)
-{
- pnp_unregister_driver(&wbcir_driver);
-}
-
-MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
-MODULE_DESCRIPTION("Winbond SuperI/O Consumer IR Driver");
-MODULE_LICENSE("GPL");
-
-module_init(wbcir_init);
-module_exit(wbcir_exit);
-
-
diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig
index 20e02a0..7929ea7 100644
--- a/drivers/media/IR/Kconfig
+++ b/drivers/media/IR/Kconfig
@@ -164,4 +164,21 @@ config IR_STREAMZAP
To compile this driver as a module, choose M here: the
module will be called streamzap.
+config IR_WINBOND_CIR
+ tristate "Winbond IR remote control"
+ depends on X86 && PNP
+ depends on IR_CORE
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_TRIGGERS
+ select BITREVERSE
+ ---help---
+ Say Y here if you want to use the IR remote functionality found
+ in some Winbond SuperI/O chips. Currently only the WPCD376I
+ chip is supported (included in some Intel Media series
+ motherboards).
+
+ To compile this driver as a module, choose M here: the module will
+ be called winbond_cir.
+
endif #IR_CORE
diff --git a/drivers/media/IR/Makefile b/drivers/media/IR/Makefile
index 1eb24e6..859c12c 100644
--- a/drivers/media/IR/Makefile
+++ b/drivers/media/IR/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_IR_MCEUSB) += mceusb.o
obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o
obj-$(CONFIG_IR_ENE) += ene_ir.o
obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
+obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o
diff --git a/drivers/media/IR/winbond-cir.c b/drivers/media/IR/winbond-cir.c
new file mode 100644
index 0000000..880eba0
--- /dev/null
+++ b/drivers/media/IR/winbond-cir.c
@@ -0,0 +1,934 @@
+/*
+ * winbond-cir.c - Driver for the Consumer IR functionality of Winbond
+ * SuperI/O chips.
+ *
+ * Currently supports the Winbond WPCD376i chip (PNP id WEC1022), but
+ * could probably support others (Winbond WEC102X, NatSemi, etc)
+ * with minor modifications.
+ *
+ * Original Author: David Härdeman <david@hardeman.nu>
+ * Copyright (C) 2009 - 2010 David Härdeman <david@hardeman.nu>
+ *
+ * Dedicated to my daughter Matilda, without whose loving attention this
+ * driver would have been finished in half the time and with a fraction
+ * of the bugs.
+ *
+ * Written using:
+ * o Winbond WPCD376I datasheet helpfully provided by Jesse Barnes at Intel
+ * o NatSemi PC87338/PC97338 datasheet (for the serial port stuff)
+ * o DSDT dumps
+ *
+ * Supported features:
+ * o Wake-On-CIR functionality
+ *
+ * To do:
+ * o Learning
+ * o IR Transmit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/leds.h>
+#include <linux/spinlock.h>
+#include <linux/pci_ids.h>
+#include <linux/io.h>
+#include <linux/bitrev.h>
+#include <linux/slab.h>
+#include <media/ir-core.h>
+
+#define DRVNAME "winbond-cir"
+
+/* CEIR Wake-Up Registers, relative to data->wbase */
+#define WBCIR_REG_WCEIR_CTL 0x03 /* CEIR Receiver Control */
+#define WBCIR_REG_WCEIR_STS 0x04 /* CEIR Receiver Status */
+#define WBCIR_REG_WCEIR_EV_EN 0x05 /* CEIR Receiver Event Enable */
+#define WBCIR_REG_WCEIR_CNTL 0x06 /* CEIR Receiver Counter Low */
+#define WBCIR_REG_WCEIR_CNTH 0x07 /* CEIR Receiver Counter High */
+#define WBCIR_REG_WCEIR_INDEX 0x08 /* CEIR Receiver Index */
+#define WBCIR_REG_WCEIR_DATA 0x09 /* CEIR Receiver Data */
+#define WBCIR_REG_WCEIR_CSL 0x0A /* CEIR Re. Compare Strlen */
+#define WBCIR_REG_WCEIR_CFG1 0x0B /* CEIR Re. Configuration 1 */
+#define WBCIR_REG_WCEIR_CFG2 0x0C /* CEIR Re. Configuration 2 */
+
+/* CEIR Enhanced Functionality Registers, relative to data->ebase */
+#define WBCIR_REG_ECEIR_CTS 0x00 /* Enhanced IR Control Status */
+#define WBCIR_REG_ECEIR_CCTL 0x01 /* Infrared Counter Control */
+#define WBCIR_REG_ECEIR_CNT_LO 0x02 /* Infrared Counter LSB */
+#define WBCIR_REG_ECEIR_CNT_HI 0x03 /* Infrared Counter MSB */
+#define WBCIR_REG_ECEIR_IREM 0x04 /* Infrared Emitter Status */
+
+/* SP3 Banked Registers, relative to data->sbase */
+#define WBCIR_REG_SP3_BSR 0x03 /* Bank Select, all banks */
+ /* Bank 0 */
+#define WBCIR_REG_SP3_RXDATA 0x00 /* FIFO RX data (r) */
+#define WBCIR_REG_SP3_TXDATA 0x00 /* FIFO TX data (w) */
+#define WBCIR_REG_SP3_IER 0x01 /* Interrupt Enable */
+#define WBCIR_REG_SP3_EIR 0x02 /* Event Identification (r) */
+#define WBCIR_REG_SP3_FCR 0x02 /* FIFO Control (w) */
+#define WBCIR_REG_SP3_MCR 0x04 /* Mode Control */
+#define WBCIR_REG_SP3_LSR 0x05 /* Link Status */
+#define WBCIR_REG_SP3_MSR 0x06 /* Modem Status */
+#define WBCIR_REG_SP3_ASCR 0x07 /* Aux Status and Control */
+ /* Bank 2 */
+#define WBCIR_REG_SP3_BGDL 0x00 /* Baud Divisor LSB */
+#define WBCIR_REG_SP3_BGDH 0x01 /* Baud Divisor MSB */
+#define WBCIR_REG_SP3_EXCR1 0x02 /* Extended Control 1 */
+#define WBCIR_REG_SP3_EXCR2 0x04 /* Extended Control 2 */
+#define WBCIR_REG_SP3_TXFLV 0x06 /* TX FIFO Level */
+#define WBCIR_REG_SP3_RXFLV 0x07 /* RX FIFO Level */
+ /* Bank 3 */
+#define WBCIR_REG_SP3_MRID 0x00 /* Module Identification */
+#define WBCIR_REG_SP3_SH_LCR 0x01 /* LCR Shadow */
+#define WBCIR_REG_SP3_SH_FCR 0x02 /* FCR Shadow */
+ /* Bank 4 */
+#define WBCIR_REG_SP3_IRCR1 0x02 /* Infrared Control 1 */
+ /* Bank 5 */
+#define WBCIR_REG_SP3_IRCR2 0x04 /* Infrared Control 2 */
+ /* Bank 6 */
+#define WBCIR_REG_SP3_IRCR3 0x00 /* Infrared Control 3 */
+#define WBCIR_REG_SP3_SIR_PW 0x02 /* SIR Pulse Width */
+ /* Bank 7 */
+#define WBCIR_REG_SP3_IRRXDC 0x00 /* IR RX Demod Control */
+#define WBCIR_REG_SP3_IRTXMC 0x01 /* IR TX Mod Control */
+#define WBCIR_REG_SP3_RCCFG 0x02 /* CEIR Config */
+#define WBCIR_REG_SP3_IRCFG1 0x04 /* Infrared Config 1 */
+#define WBCIR_REG_SP3_IRCFG4 0x07 /* Infrared Config 4 */
+
+/*
+ * Magic values follow
+ */
+
+/* No interrupts for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
+#define WBCIR_IRQ_NONE 0x00
+/* RX data bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
+#define WBCIR_IRQ_RX 0x01
+/* Over/Under-flow bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
+#define WBCIR_IRQ_ERR 0x04
+/* Led enable/disable bit for WBCIR_REG_ECEIR_CTS */
+#define WBCIR_LED_ENABLE 0x80
+/* RX data available bit for WBCIR_REG_SP3_LSR */
+#define WBCIR_RX_AVAIL 0x01
+/* RX disable bit for WBCIR_REG_SP3_ASCR */
+#define WBCIR_RX_DISABLE 0x20
+/* Extended mode enable bit for WBCIR_REG_SP3_EXCR1 */
+#define WBCIR_EXT_ENABLE 0x01
+/* Select compare register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */
+#define WBCIR_REGSEL_COMPARE 0x10
+/* Select mask register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */
+#define WBCIR_REGSEL_MASK 0x20
+/* Starting address of selected register in WBCIR_REG_WCEIR_INDEX */
+#define WBCIR_REG_ADDR0 0x00
+
+/* Valid banks for the SP3 UART */
+enum wbcir_bank {
+ WBCIR_BANK_0 = 0x00,
+ WBCIR_BANK_1 = 0x80,
+ WBCIR_BANK_2 = 0xE0,
+ WBCIR_BANK_3 = 0xE4,
+ WBCIR_BANK_4 = 0xE8,
+ WBCIR_BANK_5 = 0xEC,
+ WBCIR_BANK_6 = 0xF0,
+ WBCIR_BANK_7 = 0xF4,
+};
+
+/* Supported power-on IR Protocols */
+enum wbcir_protocol {
+ IR_PROTOCOL_RC5 = 0x0,
+ IR_PROTOCOL_NEC = 0x1,
+ IR_PROTOCOL_RC6 = 0x2,
+};
+
+/* Misc */
+#define WBCIR_NAME "Winbond CIR"
+#define WBCIR_ID_FAMILY 0xF1 /* Family ID for the WPCD376I */
+#define WBCIR_ID_CHIP 0x04 /* Chip ID for the WPCD376I */
+#define INVALID_SCANCODE 0x7FFFFFFF /* Invalid with all protos */
+#define WAKEUP_IOMEM_LEN 0x10 /* Wake-Up I/O Reg Len */
+#define EHFUNC_IOMEM_LEN 0x10 /* Enhanced Func I/O Reg Len */
+#define SP_IOMEM_LEN 0x08 /* Serial Port 3 (IR) Reg Len */
+
+/* Per-device data */
+struct wbcir_data {
+ spinlock_t spinlock;
+
+ unsigned long wbase; /* Wake-Up Baseaddr */
+ unsigned long ebase; /* Enhanced Func. Baseaddr */
+ unsigned long sbase; /* Serial Port Baseaddr */
+ unsigned int irq; /* Serial Port IRQ */
+
+ struct rc_dev *dev;
+
+ struct led_trigger *rxtrigger;
+ struct led_trigger *txtrigger;
+ struct led_classdev led;
+
+ /* RX irdata state */
+ bool irdata_active;
+ bool irdata_error;
+ struct ir_raw_event ev;
+};
+
+static enum wbcir_protocol protocol = IR_PROTOCOL_RC6;
+module_param(protocol, uint, 0444);
+MODULE_PARM_DESC(protocol, "IR protocol to use for the power-on command "
+ "(0 = RC5, 1 = NEC, 2 = RC6A, default)");
+
+static int invert; /* default = 0 */
+module_param(invert, bool, 0444);
+MODULE_PARM_DESC(invert, "Invert the signal from the IR receiver");
+
+static unsigned int wake_sc = 0x800F040C;
+module_param(wake_sc, uint, 0644);
+MODULE_PARM_DESC(wake_sc, "Scancode of the power-on IR command");
+
+static unsigned int wake_rc6mode = 6;
+module_param(wake_rc6mode, uint, 0644);
+MODULE_PARM_DESC(wake_rc6mode, "RC6 mode for the power-on command "
+ "(0 = 0, 6 = 6A, default)");
+
+
+
+/*****************************************************************************
+ *
+ * UTILITY FUNCTIONS
+ *
+ *****************************************************************************/
+
+/* Caller needs to hold wbcir_lock */
+static void
+wbcir_set_bits(unsigned long addr, u8 bits, u8 mask)
+{
+ u8 val;
+
+ val = inb(addr);
+ val = ((val & ~mask) | (bits & mask));
+ outb(val, addr);
+}
+
+/* Selects the register bank for the serial port */
+static inline void
+wbcir_select_bank(struct wbcir_data *data, enum wbcir_bank bank)
+{
+ outb(bank, data->sbase + WBCIR_REG_SP3_BSR);
+}
+
+static enum led_brightness
+wbcir_led_brightness_get(struct led_classdev *led_cdev)
+{
+ struct wbcir_data *data = container_of(led_cdev,
+ struct wbcir_data,
+ led);
+
+ if (inb(data->ebase + WBCIR_REG_ECEIR_CTS) & WBCIR_LED_ENABLE)
+ return LED_FULL;
+ else
+ return LED_OFF;
+}
+
+static void
+wbcir_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct wbcir_data *data = container_of(led_cdev,
+ struct wbcir_data,
+ led);
+
+ wbcir_set_bits(data->ebase + WBCIR_REG_ECEIR_CTS,
+ brightness == LED_OFF ? 0x00 : WBCIR_LED_ENABLE,
+ WBCIR_LED_ENABLE);
+}
+
+/* Manchester encodes bits to RC6 message cells (see wbcir_shutdown) */
+static u8
+wbcir_to_rc6cells(u8 val)
+{
+ u8 coded = 0x00;
+ int i;
+
+ val &= 0x0F;
+ for (i = 0; i < 4; i++) {
+ if (val & 0x01)
+ coded |= 0x02 << (i * 2);
+ else
+ coded |= 0x01 << (i * 2);
+ val >>= 1;
+ }
+
+ return coded;
+}
+
+/*****************************************************************************
+ *
+ * INTERRUPT FUNCTIONS
+ *
+ *****************************************************************************/
+
+static irqreturn_t
+wbcir_irq_handler(int irqno, void *cookie)
+{
+ struct pnp_dev *device = cookie;
+ struct wbcir_data *data = pnp_get_drvdata(device);
+ unsigned long flags;
+ u8 irdata[8];
+ u8 disable = true;
+ u8 status;
+ int i;
+
+ spin_lock_irqsave(&data->spinlock, flags);
+
+ wbcir_select_bank(data, WBCIR_BANK_0);
+
+ status = inb(data->sbase + WBCIR_REG_SP3_EIR);
+
+ if (!(status & (WBCIR_IRQ_RX | WBCIR_IRQ_ERR))) {
+ spin_unlock_irqrestore(&data->spinlock, flags);
+ return IRQ_NONE;
+ }
+
+ /* Check for e.g. buffer overflow */
+ if (status & WBCIR_IRQ_ERR) {
+ data->irdata_error = true;
+ ir_raw_event_reset(data->dev);
+ }
+
+ if (!(status & WBCIR_IRQ_RX))
+ goto out;
+
+ if (!data->irdata_active) {
+ data->irdata_active = true;
+ led_trigger_event(data->rxtrigger, LED_FULL);
+ }
+
+ /* Since RXHDLEV is set, at least 8 bytes are in the FIFO */
+ insb(data->sbase + WBCIR_REG_SP3_RXDATA, &irdata[0], 8);
+
+ for (i = 0; i < 8; i++) {
+ u8 pulse;
+ u32 duration;
+
+ if (irdata[i] != 0xFF && irdata[i] != 0x00)
+ disable = false;
+
+ if (data->irdata_error)
+ continue;
+
+ pulse = irdata[i] & 0x80 ? false : true;
+ duration = (irdata[i] & 0x7F) * 10000; /* ns */
+
+ if (data->ev.pulse != pulse) {
+ if (data->ev.duration != 0) {
+ ir_raw_event_store(data->dev, &data->ev);
+ data->ev.duration = 0;
+ }
+
+ data->ev.pulse = pulse;
+ }
+
+ data->ev.duration += duration;
+ }
+
+ if (disable) {
+ if (data->ev.duration != 0 && !data->irdata_error) {
+ ir_raw_event_store(data->dev, &data->ev);
+ data->ev.duration = 0;
+ }
+
+ /* Set RXINACTIVE */
+ outb(WBCIR_RX_DISABLE, data->sbase + WBCIR_REG_SP3_ASCR);
+
+ /* Drain the FIFO */
+ while (inb(data->sbase + WBCIR_REG_SP3_LSR) & WBCIR_RX_AVAIL)
+ inb(data->sbase + WBCIR_REG_SP3_RXDATA);
+
+ ir_raw_event_reset(data->dev);
+ data->irdata_error = false;
+ data->irdata_active = false;
+ led_trigger_event(data->rxtrigger, LED_OFF);
+ }
+
+ ir_raw_event_handle(data->dev);
+
+out:
+ spin_unlock_irqrestore(&data->spinlock, flags);
+ return IRQ_HANDLED;
+}
+
+
+
+/*****************************************************************************
+ *
+ * SETUP/INIT/SUSPEND/RESUME FUNCTIONS
+ *
+ *****************************************************************************/
+
+static void
+wbcir_shutdown(struct pnp_dev *device)
+{
+ struct device *dev = &device->dev;
+ struct wbcir_data *data = pnp_get_drvdata(device);
+ int do_wake = 1;
+ u8 match[11];
+ u8 mask[11];
+ u8 rc6_csl = 0;
+ int i;
+
+ memset(match, 0, sizeof(match));
+ memset(mask, 0, sizeof(mask));
+
+ if (wake_sc == INVALID_SCANCODE || !device_may_wakeup(dev)) {
+ do_wake = 0;
+ goto finish;
+ }
+
+ switch (protocol) {
+ case IR_PROTOCOL_RC5:
+ if (wake_sc > 0xFFF) {
+ do_wake = 0;
+ dev_err(dev, "RC5 - Invalid wake scancode\n");
+ break;
+ }
+
+ /* Mask = 13 bits, ex toggle */
+ mask[0] = 0xFF;
+ mask[1] = 0x17;
+
+ match[0] = (wake_sc & 0x003F); /* 6 command bits */
+ match[0] |= (wake_sc & 0x0180) >> 1; /* 2 address bits */
+ match[1] = (wake_sc & 0x0E00) >> 9; /* 3 address bits */
+ if (!(wake_sc & 0x0040)) /* 2nd start bit */
+ match[1] |= 0x10;
+
+ break;
+
+ case IR_PROTOCOL_NEC:
+ if (wake_sc > 0xFFFFFF) {
+ do_wake = 0;
+ dev_err(dev, "NEC - Invalid wake scancode\n");
+ break;
+ }
+
+ mask[0] = mask[1] = mask[2] = mask[3] = 0xFF;
+
+ match[1] = bitrev8((wake_sc & 0xFF));
+ match[0] = ~match[1];
+
+ match[3] = bitrev8((wake_sc & 0xFF00) >> 8);
+ if (wake_sc > 0xFFFF)
+ match[2] = bitrev8((wake_sc & 0xFF0000) >> 16);
+ else
+ match[2] = ~match[3];
+
+ break;
+
+ case IR_PROTOCOL_RC6:
+
+ if (wake_rc6mode == 0) {
+ if (wake_sc > 0xFFFF) {
+ do_wake = 0;
+ dev_err(dev, "RC6 - Invalid wake scancode\n");
+ break;
+ }
+
+ /* Command */
+ match[0] = wbcir_to_rc6cells(wake_sc >> 0);
+ mask[0] = 0xFF;
+ match[1] = wbcir_to_rc6cells(wake_sc >> 4);
+ mask[1] = 0xFF;
+
+ /* Address */
+ match[2] = wbcir_to_rc6cells(wake_sc >> 8);
+ mask[2] = 0xFF;
+ match[3] = wbcir_to_rc6cells(wake_sc >> 12);
+ mask[3] = 0xFF;
+
+ /* Header */
+ match[4] = 0x50; /* mode1 = mode0 = 0, ignore toggle */
+ mask[4] = 0xF0;
+ match[5] = 0x09; /* start bit = 1, mode2 = 0 */
+ mask[5] = 0x0F;
+
+ rc6_csl = 44;
+
+ } else if (wake_rc6mode == 6) {
+ i = 0;
+
+ /* Command */
+ match[i] = wbcir_to_rc6cells(wake_sc >> 0);
+ mask[i++] = 0xFF;
+ match[i] = wbcir_to_rc6cells(wake_sc >> 4);
+ mask[i++] = 0xFF;
+
+ /* Address + Toggle */
+ match[i] = wbcir_to_rc6cells(wake_sc >> 8);
+ mask[i++] = 0xFF;
+ match[i] = wbcir_to_rc6cells(wake_sc >> 12);
+ mask[i++] = 0x3F;
+
+ /* Customer bits 7 - 0 */
+ match[i] = wbcir_to_rc6cells(wake_sc >> 16);
+ mask[i++] = 0xFF;
+ match[i] = wbcir_to_rc6cells(wake_sc >> 20);
+ mask[i++] = 0xFF;
+
+ if (wake_sc & 0x80000000) {
+ /* Customer range bit and bits 15 - 8 */
+ match[i] = wbcir_to_rc6cells(wake_sc >> 24);
+ mask[i++] = 0xFF;
+ match[i] = wbcir_to_rc6cells(wake_sc >> 28);
+ mask[i++] = 0xFF;
+ rc6_csl = 76;
+ } else if (wake_sc <= 0x007FFFFF) {
+ rc6_csl = 60;
+ } else {
+ do_wake = 0;
+ dev_err(dev, "RC6 - Invalid wake scancode\n");
+ break;
+ }
+
+ /* Header */
+ match[i] = 0x93; /* mode1 = mode0 = 1, submode = 0 */
+ mask[i++] = 0xFF;
+ match[i] = 0x0A; /* start bit = 1, mode2 = 1 */
+ mask[i++] = 0x0F;
+
+ } else {
+ do_wake = 0;
+ dev_err(dev, "RC6 - Invalid wake mode\n");
+ }
+
+ break;
+
+ default:
+ do_wake = 0;
+ break;
+ }
+
+finish:
+ if (do_wake) {
+ /* Set compare and compare mask */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_INDEX,
+ WBCIR_REGSEL_COMPARE | WBCIR_REG_ADDR0,
+ 0x3F);
+ outsb(data->wbase + WBCIR_REG_WCEIR_DATA, match, 11);
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_INDEX,
+ WBCIR_REGSEL_MASK | WBCIR_REG_ADDR0,
+ 0x3F);
+ outsb(data->wbase + WBCIR_REG_WCEIR_DATA, mask, 11);
+
+ /* RC6 Compare String Len */
+ outb(rc6_csl, data->wbase + WBCIR_REG_WCEIR_CSL);
+
+ /* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17);
+
+ /* Clear BUFF_EN, Clear END_EN, Set MATCH_EN */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x01, 0x07);
+
+ /* Set CEIR_EN */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x01, 0x01);
+
+ } else {
+ /* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
+
+ /* Clear CEIR_EN */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01);
+ }
+
+ /* Disable interrupts */
+ wbcir_select_bank(data, WBCIR_BANK_0);
+ outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
+
+ /* Disable LED */
+ data->irdata_active = false;
+ led_trigger_event(data->rxtrigger, LED_OFF);
+
+ /*
+ * ACPI will set the HW disable bit for SP3 which means that the
+ * output signals are left in an undefined state which may cause
+ * spurious interrupts which we need to ignore until the hardware
+ * is reinitialized.
+ */
+ disable_irq(data->irq);
+}
+
+static int
+wbcir_suspend(struct pnp_dev *device, pm_message_t state)
+{
+ wbcir_shutdown(device);
+ return 0;
+}
+
+static void
+wbcir_init_hw(struct wbcir_data *data)
+{
+ u8 tmp;
+
+ /* Disable interrupts */
+ wbcir_select_bank(data, WBCIR_BANK_0);
+ outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
+
+ /* Set PROT_SEL, RX_INV, Clear CEIR_EN (needed for the led) */
+ tmp = protocol << 4;
+ if (invert)
+ tmp |= 0x08;
+ outb(tmp, data->wbase + WBCIR_REG_WCEIR_CTL);
+
+ /* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17);
+
+ /* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
+
+ /* Set RC5 cell time to correspond to 36 kHz */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CFG1, 0x4A, 0x7F);
+
+ /* Set IRTX_INV */
+ if (invert)
+ outb(0x04, data->ebase + WBCIR_REG_ECEIR_CCTL);
+ else
+ outb(0x00, data->ebase + WBCIR_REG_ECEIR_CCTL);
+
+ /*
+ * Clear IR LED, set SP3 clock to 24Mhz
+ * set SP3_IRRX_SW to binary 01, helpfully not documented
+ */
+ outb(0x10, data->ebase + WBCIR_REG_ECEIR_CTS);
+
+ /* Enable extended mode */
+ wbcir_select_bank(data, WBCIR_BANK_2);
+ outb(WBCIR_EXT_ENABLE, data->sbase + WBCIR_REG_SP3_EXCR1);
+
+ /*
+ * Configure baud generator, IR data will be sampled at
+ * a bitrate of: (24Mhz * prescaler) / (divisor * 16).
+ *
+ * The ECIR registers include a flag to change the
+ * 24Mhz clock freq to 48Mhz.
+ *
+ * It's not documented in the specs, but fifo levels
+ * other than 16 seems to be unsupported.
+ */
+
+ /* prescaler 1.0, tx/rx fifo lvl 16 */
+ outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2);
+
+ /* Set baud divisor to generate one byte per bit/cell */
+ switch (protocol) {
+ case IR_PROTOCOL_RC5:
+ outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL);
+ break;
+ case IR_PROTOCOL_RC6:
+ outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL);
+ break;
+ case IR_PROTOCOL_NEC:
+ outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL);
+ break;
+ }
+ outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
+
+ /* Set CEIR mode */
+ wbcir_select_bank(data, WBCIR_BANK_0);
+ outb(0xC0, data->sbase + WBCIR_REG_SP3_MCR);
+ inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */
+ inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */
+
+ /* Disable RX demod, run-length encoding/decoding, set freq span */
+ wbcir_select_bank(data, WBCIR_BANK_7);
+ outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG);
+
+ /* Disable timer */
+ wbcir_select_bank(data, WBCIR_BANK_4);
+ outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR1);
+
+ /* Enable MSR interrupt, Clear AUX_IRX */
+ wbcir_select_bank(data, WBCIR_BANK_5);
+ outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR2);
+
+ /* Disable CRC */
+ wbcir_select_bank(data, WBCIR_BANK_6);
+ outb(0x20, data->sbase + WBCIR_REG_SP3_IRCR3);
+
+ /* Set RX/TX (de)modulation freq, not really used */
+ wbcir_select_bank(data, WBCIR_BANK_7);
+ outb(0xF2, data->sbase + WBCIR_REG_SP3_IRRXDC);
+ outb(0x69, data->sbase + WBCIR_REG_SP3_IRTXMC);
+
+ /* Set invert and pin direction */
+ if (invert)
+ outb(0x10, data->sbase + WBCIR_REG_SP3_IRCFG4);
+ else
+ outb(0x00, data->sbase + WBCIR_REG_SP3_IRCFG4);
+
+ /* Set FIFO thresholds (RX = 8, TX = 3), reset RX/TX */
+ wbcir_select_bank(data, WBCIR_BANK_0);
+ outb(0x97, data->sbase + WBCIR_REG_SP3_FCR);
+
+ /* Clear AUX status bits */
+ outb(0xE0, data->sbase + WBCIR_REG_SP3_ASCR);
+
+ /* Clear IR decoding state */
+ data->irdata_active = false;
+ led_trigger_event(data->rxtrigger, LED_OFF);
+ data->irdata_error = false;
+ data->ev.duration = 0;
+ ir_raw_event_reset(data->dev);
+ ir_raw_event_handle(data->dev);
+
+ /* Enable interrupts */
+ outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER);
+}
+
+static int
+wbcir_resume(struct pnp_dev *device)
+{
+ struct wbcir_data *data = pnp_get_drvdata(device);
+
+ wbcir_init_hw(data);
+ enable_irq(data->irq);
+
+ return 0;
+}
+
+static int __devinit
+wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
+{
+ struct device *dev = &device->dev;
+ struct wbcir_data *data;
+ int err;
+
+ if (!(pnp_port_len(device, 0) == EHFUNC_IOMEM_LEN &&
+ pnp_port_len(device, 1) == WAKEUP_IOMEM_LEN &&
+ pnp_port_len(device, 2) == SP_IOMEM_LEN)) {
+ dev_err(dev, "Invalid resources\n");
+ return -ENODEV;
+ }
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ pnp_set_drvdata(device, data);
+
+ spin_lock_init(&data->spinlock);
+ data->ebase = pnp_port_start(device, 0);
+ data->wbase = pnp_port_start(device, 1);
+ data->sbase = pnp_port_start(device, 2);
+ data->irq = pnp_irq(device, 0);
+
+ if (data->wbase == 0 || data->ebase == 0 ||
+ data->sbase == 0 || data->irq == 0) {
+ err = -ENODEV;
+ dev_err(dev, "Invalid resources\n");
+ goto exit_free_data;
+ }
+
+ dev_dbg(&device->dev, "Found device "
+ "(w: 0x%lX, e: 0x%lX, s: 0x%lX, i: %u)\n",
+ data->wbase, data->ebase, data->sbase, data->irq);
+
+ if (!request_region(data->wbase, WAKEUP_IOMEM_LEN, DRVNAME)) {
+ dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
+ data->wbase, data->wbase + WAKEUP_IOMEM_LEN - 1);
+ err = -EBUSY;
+ goto exit_free_data;
+ }
+
+ if (!request_region(data->ebase, EHFUNC_IOMEM_LEN, DRVNAME)) {
+ dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
+ data->ebase, data->ebase + EHFUNC_IOMEM_LEN - 1);
+ err = -EBUSY;
+ goto exit_release_wbase;
+ }
+
+ if (!request_region(data->sbase, SP_IOMEM_LEN, DRVNAME)) {
+ dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
+ data->sbase, data->sbase + SP_IOMEM_LEN - 1);
+ err = -EBUSY;
+ goto exit_release_ebase;
+ }
+
+ err = request_irq(data->irq, wbcir_irq_handler,
+ IRQF_DISABLED, DRVNAME, device);
+ if (err) {
+ dev_err(dev, "Failed to claim IRQ %u\n", data->irq);
+ err = -EBUSY;
+ goto exit_release_sbase;
+ }
+
+ led_trigger_register_simple("cir-tx", &data->txtrigger);
+ if (!data->txtrigger) {
+ err = -ENOMEM;
+ goto exit_free_irq;
+ }
+
+ led_trigger_register_simple("cir-rx", &data->rxtrigger);
+ if (!data->rxtrigger) {
+ err = -ENOMEM;
+ goto exit_unregister_txtrigger;
+ }
+
+ data->led.name = "cir::activity";
+ data->led.default_trigger = "cir-rx";
+ data->led.brightness_set = wbcir_led_brightness_set;
+ data->led.brightness_get = wbcir_led_brightness_get;
+ err = led_classdev_register(&device->dev, &data->led);
+ if (err)
+ goto exit_unregister_rxtrigger;
+
+ data->dev = rc_allocate_device();
+ if (!data->dev) {
+ err = -ENOMEM;
+ goto exit_unregister_led;
+ }
+
+ data->dev->driver_name = WBCIR_NAME;
+ data->dev->input_name = WBCIR_NAME;
+ data->dev->input_phys = "wbcir/cir0";
+ data->dev->input_id.bustype = BUS_HOST;
+ data->dev->input_id.vendor = PCI_VENDOR_ID_WINBOND;
+ data->dev->input_id.product = WBCIR_ID_FAMILY;
+ data->dev->input_id.version = WBCIR_ID_CHIP;
+ data->dev->priv = data;
+ data->dev->dev.parent = &device->dev;
+
+ err = rc_register_device(data->dev);
+ if (err)
+ goto exit_free_rc;
+
+ device_init_wakeup(&device->dev, 1);
+
+ wbcir_init_hw(data);
+
+ return 0;
+
+exit_free_rc:
+ rc_free_device(data->dev);
+exit_unregister_led:
+ led_classdev_unregister(&data->led);
+exit_unregister_rxtrigger:
+ led_trigger_unregister_simple(data->rxtrigger);
+exit_unregister_txtrigger:
+ led_trigger_unregister_simple(data->txtrigger);
+exit_free_irq:
+ free_irq(data->irq, device);
+exit_release_sbase:
+ release_region(data->sbase, SP_IOMEM_LEN);
+exit_release_ebase:
+ release_region(data->ebase, EHFUNC_IOMEM_LEN);
+exit_release_wbase:
+ release_region(data->wbase, WAKEUP_IOMEM_LEN);
+exit_free_data:
+ kfree(data);
+ pnp_set_drvdata(device, NULL);
+exit:
+ return err;
+}
+
+static void __devexit
+wbcir_remove(struct pnp_dev *device)
+{
+ struct wbcir_data *data = pnp_get_drvdata(device);
+
+ /* Disable interrupts */
+ wbcir_select_bank(data, WBCIR_BANK_0);
+ outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
+
+ free_irq(data->irq, device);
+
+ /* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17);
+
+ /* Clear CEIR_EN */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01);
+
+ /* Clear BUFF_EN, END_EN, MATCH_EN */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
+
+ rc_unregister_device(data->dev);
+
+ led_trigger_unregister_simple(data->rxtrigger);
+ led_trigger_unregister_simple(data->txtrigger);
+ led_classdev_unregister(&data->led);
+
+ /* This is ok since &data->led isn't actually used */
+ wbcir_led_brightness_set(&data->led, LED_OFF);
+
+ release_region(data->wbase, WAKEUP_IOMEM_LEN);
+ release_region(data->ebase, EHFUNC_IOMEM_LEN);
+ release_region(data->sbase, SP_IOMEM_LEN);
+
+ kfree(data);
+
+ pnp_set_drvdata(device, NULL);
+}
+
+static const struct pnp_device_id wbcir_ids[] = {
+ { "WEC1022", 0 },
+ { "", 0 }
+};
+MODULE_DEVICE_TABLE(pnp, wbcir_ids);
+
+static struct pnp_driver wbcir_driver = {
+ .name = WBCIR_NAME,
+ .id_table = wbcir_ids,
+ .probe = wbcir_probe,
+ .remove = __devexit_p(wbcir_remove),
+ .suspend = wbcir_suspend,
+ .resume = wbcir_resume,
+ .shutdown = wbcir_shutdown
+};
+
+static int __init
+wbcir_init(void)
+{
+ int ret;
+
+ switch (protocol) {
+ case IR_PROTOCOL_RC5:
+ case IR_PROTOCOL_NEC:
+ case IR_PROTOCOL_RC6:
+ break;
+ default:
+ printk(KERN_ERR DRVNAME ": Invalid power-on protocol\n");
+ }
+
+ ret = pnp_register_driver(&wbcir_driver);
+ if (ret)
+ printk(KERN_ERR DRVNAME ": Unable to register driver\n");
+
+ return ret;
+}
+
+static void __exit
+wbcir_exit(void)
+{
+ pnp_unregister_driver(&wbcir_driver);
+}
+
+MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
+MODULE_DESCRIPTION("Winbond SuperI/O Consumer IR Driver");
+MODULE_LICENSE("GPL");
+
+module_init(wbcir_init);
+module_exit(wbcir_exit);
+
+
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH 0/7] rc-core: ir-core to rc-core conversion
2010-10-29 19:07 [PATCH 0/7] rc-core: ir-core to rc-core conversion David Härdeman
` (6 preceding siblings ...)
2010-10-29 19:08 ` [PATCH 7/7] rc-core: convert winbond-cir David Härdeman
@ 2010-10-29 20:11 ` Jarod Wilson
2010-11-01 22:07 ` David Härdeman
8 siblings, 0 replies; 18+ messages in thread
From: Jarod Wilson @ 2010-10-29 20:11 UTC (permalink / raw)
To: David Härdeman; +Cc: linux-media, mchehab
On Oct 29, 2010, at 3:07 PM, David Härdeman wrote:
> This is my current patch queue, the main change is to make struct rc_dev
> the primary interface for rc drivers and to abstract away the fact that
> there's an input device lurking in there somewhere. The patchset has been
> updated to apply on top of the staging/for_v2.6.37-rc1 branch of the
> media_tree git repo.
>
> In addition, the cx88 and winbond-cir drivers are converted to use rc-core.
>
> The first patch (which is not to be merged) just merges the large scancodes
> patches for the input subsystem to make sure that merging my patches upstream
> will be doable post -rc1 (the input patches are already merged upstream).
>
> Given the changes, these patches touch every single driver. Obviously I
> haven't tested them all due to a lack of hardware (I have made sure that
> all drivers compile without any warnings and I have tested the end result
> on mceusb and winbond-cir hardware).
You can definitely sign me up for imon, streamzap and nuvoton-cir testing, and for sanity's sake, I can also verify multiple generations of mceusb devices. I'll see what I can get done on that front this weekend...
--
Jarod Wilson
jarod@wilsonet.com
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH 0/7] rc-core: ir-core to rc-core conversion
2010-10-29 19:07 [PATCH 0/7] rc-core: ir-core to rc-core conversion David Härdeman
` (7 preceding siblings ...)
2010-10-29 20:11 ` [PATCH 0/7] rc-core: ir-core to rc-core conversion Jarod Wilson
@ 2010-11-01 22:07 ` David Härdeman
8 siblings, 0 replies; 18+ messages in thread
From: David Härdeman @ 2010-11-01 22:07 UTC (permalink / raw)
To: linux-media; +Cc: jarod, mchehab
On Fri, Oct 29, 2010 at 09:07:52PM +0200, David Härdeman wrote:
> This is my current patch queue, the main change is to make struct rc_dev
> the primary interface for rc drivers and to abstract away the fact that
> there's an input device lurking in there somewhere. The patchset has been
> updated to apply on top of the staging/for_v2.6.37-rc1 branch of the
> media_tree git repo.
And 2.6.37-rc1 is now released with the large scancode support as well
as two bugfixes to that code. Could I please get some indication on the
status of my patches? Last time I heard anything it was that they should
go in after 2.6.37-rc1. Having to keep on rebasing them is a pain in the
ass.
--
David Härdeman
^ permalink raw reply [flat|nested] 18+ messages in thread