[U-Boot] [PATCH] at91rm9200ek: add configure target for RAM boot

[U-Boot] [PATCH] at91rm9200ek: add configure target for RAM boot

[Andreas Bießmann]

This patch also removes now unnecessary config.mk in board directory and make
usage of new features in boards.cfg.

Signed-off-by: Andreas Bie?mann <andreas.devel@googlemail.com>
---
 board/atmel/at91rm9200ek/config.mk |    2 --
 boards.cfg                         |    3 ++-
 2 files changed, 2 insertions(+), 3 deletions(-)
 delete mode 100644 board/atmel/at91rm9200ek/config.mk

diff --git a/board/atmel/at91rm9200ek/config.mk b/board/atmel/at91rm9200ek/config.mk
deleted file mode 100644
index c7323fe..0000000
--- a/board/atmel/at91rm9200ek/config.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-# currently only NOR flash booting is supported
-CONFIG_SYS_TEXT_BASE = 0x10000000
diff --git a/boards.cfg b/boards.cfg
index 6c2a667..82cc293 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -359,7 +359,8 @@ modnet50	arm	arm720t
 lpc2292sodimm	arm	arm720t		-		-		lpc2292
 eb_cpux9k2	arm	arm920t		-		BuS		at91
 at91rm9200dk	arm	arm920t		-		atmel		at91rm9200
-at91rm9200ek	arm	arm920t		-		atmel		at91
+at91rm9200ek	arm	arm920t		at91rm9200ek	atmel		at91	at91rm9200ek:SYS_TEXT_BASE=0x10000000
+at91rm9200ek_ram	arm	arm920t		at91rm9200ek	atmel		at91	at91rm9200ek:SKIP_LOWLEVEL_INIT,SYS_TEXT_BASE=0x21000000
 sbc2410x	arm	arm920t		-		-		s3c24x0
 smdk2400	arm	arm920t		-		samsung		s3c24x0
 smdk2410	arm	arm920t		-		samsung		s3c24x0
-- 
1.7.3.2

[U-Boot] [PATCH] at91rm9200ek: add configure target for RAM boot

[Wolfgang Denk]

Dear =?UTF-8?q?Andreas=20Bie=C3=9Fmann?=,

In message <1288511791-92091-1-git-send-email-andreas.devel@googlemail.com> you wrote:
...
-at91rm9200ek	arm	arm920t		-		atmel		at91
+at91rm9200ek	arm	arm920t		at91rm9200ek	atmel		at91	at91rm9200ek:SYS_TEXT_BASE=0x10000000
+at91rm9200ek_ram	arm	arm920t		at91rm9200ek	atmel		at91	at91rm9200ek:SKIP_LOWLEVEL_INIT,SYS_TEXT_BASE=0x21000000

No, pleaso don't. I did not remove all the scripting from Makefile to
see the same complexity coming back to boards.cfg. Yes,we do similar
things for the old boards, but that's only because I usually have no
chance to actually test any conversions.

For new boards, please use a _simple_ buildoption, say:

+at91rm9200ek	arm	arm920t		at91rm9200ek	atmel		at91	at91rm9200ek
+at91rm9200ek_ram arm	arm920t		at91rm9200ek	atmel		at91	at91rm9200ek:RAMBOOT

Do the fine tuning in your board config file using some "#ifdef CONFIG_RAMBOOT"
or similar.

Thanks.

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Es ist offensichtlich, dass das menschliche Gehirn wie  ein  Computer
funktioniert.  Da  es  keine  dummen Computer gibt, gibt es also auch
keine dummen Menschen. Nur ein paar Leute, die unter DOS laufen.
                                                       -- <unbekannt>

[U-Boot] [PATCH v2] at91rm9200ek: add configure target for RAM boot

[Andreas Bießmann]

This patch also removes now unnecessary config.mk in board directory and
make usage of new features in boards.cfg.

Signed-off-by: Andreas Bie?mann <andreas.devel@googlemail.com>
---
changes since v1:
 - add MAKEALL target
 - move settings from boards.cfg to i/c/at91rm9200ek.h

 MAKEALL                            |    1 +
 board/atmel/at91rm9200ek/config.mk |    2 --
 boards.cfg                         |    3 ++-
 include/configs/at91rm9200ek.h     |   14 ++++++++++++++
 4 files changed, 17 insertions(+), 3 deletions(-)
 delete mode 100644 board/atmel/at91rm9200ek/config.mk

diff --git a/MAKEALL b/MAKEALL
index c54c6e8..818138e 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -438,6 +438,7 @@ LIST_at91="			\
 	at91cap9adk		\
 	at91rm9200dk		\
 	at91rm9200ek		\
+	at91rm9200ek_ram	\
 	at91sam9260ek		\
 	at91sam9261ek		\
 	at91sam9263ek		\
diff --git a/board/atmel/at91rm9200ek/config.mk b/board/atmel/at91rm9200ek/config.mk
deleted file mode 100644
index c7323fe..0000000
--- a/board/atmel/at91rm9200ek/config.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-# currently only NOR flash booting is supported
-CONFIG_SYS_TEXT_BASE = 0x10000000
diff --git a/boards.cfg b/boards.cfg
index 6c2a667..6f7dc54 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -359,7 +359,8 @@ modnet50	arm	arm720t
 lpc2292sodimm	arm	arm720t		-		-		lpc2292
 eb_cpux9k2	arm	arm920t		-		BuS		at91
 at91rm9200dk	arm	arm920t		-		atmel		at91rm9200
-at91rm9200ek	arm	arm920t		-		atmel		at91
+at91rm9200ek	arm	arm920t		at91rm9200ek	atmel		at91	at91rm9200ek
+at91rm9200ek_ram	arm	arm920t		at91rm9200ek	atmel		at91	at91rm9200ek:RAMBOOT
 sbc2410x	arm	arm920t		-		-		s3c24x0
 smdk2400	arm	arm920t		-		samsung		s3c24x0
 smdk2410	arm	arm920t		-		samsung		s3c24x0
diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h
index 14559f5..673abbc 100644
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@@ -33,6 +33,20 @@
 #include <asm/sizes.h>
 
 /*
+ * set some initial configurations depending on configure target
+ *
+ * at91rm9200ek_config     -> boot from 0x0 in NOR Flash at CS0
+ * at91rm9200ek_ram_config -> continue booting from 0x21000000 in RAM; lowlevel
+ *                            initialisation was done by preloader
+ */
+#ifdef CONFIG_RAMBOOT
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE 0x21000000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x10000000
+#endif
+
+/*
  * AT91C_XTAL_CLOCK is the frequency of external xtal in hertz
  * AT91C_MAIN_CLOCK is the frequency of PLLA output
  * AT91C_MASTER_CLOCK is the peripherial clock
-- 
1.7.3.2

[U-Boot] [PATCH v2] at91rm9200ek: add configure target for RAM boot

[Wolfgang Denk]

Dear =?UTF-8?q?Andreas=20Bie=C3=9Fmann?=,

In message <1288518476-62197-1-git-send-email-andreas.devel@googlemail.com> you wrote:
> This patch also removes now unnecessary config.mk in board directory and
> make usage of new features in boards.cfg.
> 
> Signed-off-by: Andreas Bie??mann <andreas.devel@googlemail.com>
> ---
> changes since v1:
>  - add MAKEALL target
>  - move settings from boards.cfg to i/c/at91rm9200ek.h
> 
>  MAKEALL                            |    1 +
>  board/atmel/at91rm9200ek/config.mk |    2 --
>  boards.cfg                         |    3 ++-
>  include/configs/at91rm9200ek.h     |   14 ++++++++++++++
>  4 files changed, 17 insertions(+), 3 deletions(-)
>  delete mode 100644 board/atmel/at91rm9200ek/config.mk
> 
> diff --git a/MAKEALL b/MAKEALL
> index c54c6e8..818138e 100755
> --- a/MAKEALL
> +++ b/MAKEALL
> @@ -438,6 +438,7 @@ LIST_at91="			\
>  	at91cap9adk		\
>  	at91rm9200dk		\
>  	at91rm9200ek		\
> +	at91rm9200ek_ram	\
>  	at91sam9260ek		\
>  	at91sam9261ek		\
>  	at91sam9263ek		\

Oops. Sorry for not spotting this before. Don;t do that. all boards
listed in boards.cfg auto automatically selcted and should be
_removed_ from the MAKEALL lists. Instead, add an entry
"$(boards_by_cpu at91)" like we have with other processor families.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Unix is supported by IBM, like a hanging man is supported by rope.
		        - Don Libes & Sandy Ressler: _Life With Unix_

[U-Boot] [PATCH v3 1/2] at91rm9200ek: add configure target for RAM boot

[Andreas Bießmann]

This patch also removes now unnecessary config.mk in board directory and
make usage of new features in boards.cfg.

Signed-off-by: Andreas Bie?mann <andreas.devel@googlemail.com>
---
changes since v1:
 - add MAKEALL target
 - move settings from boards.cfg to i/c/at91rm9200ek.h
changes since v2:
 - remove MAKEALL stuff from this patch

 board/atmel/at91rm9200ek/config.mk |    2 --
 boards.cfg                         |    3 ++-
 include/configs/at91rm9200ek.h     |   14 ++++++++++++++
 3 files changed, 16 insertions(+), 3 deletions(-)
 delete mode 100644 board/atmel/at91rm9200ek/config.mk

diff --git a/board/atmel/at91rm9200ek/config.mk b/board/atmel/at91rm9200ek/config.mk
deleted file mode 100644
index c7323fe..0000000
--- a/board/atmel/at91rm9200ek/config.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-# currently only NOR flash booting is supported
-CONFIG_SYS_TEXT_BASE = 0x10000000
diff --git a/boards.cfg b/boards.cfg
index 6c2a667..6f7dc54 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -359,7 +359,8 @@ modnet50	arm	arm720t
 lpc2292sodimm	arm	arm720t		-		-		lpc2292
 eb_cpux9k2	arm	arm920t		-		BuS		at91
 at91rm9200dk	arm	arm920t		-		atmel		at91rm9200
-at91rm9200ek	arm	arm920t		-		atmel		at91
+at91rm9200ek	arm	arm920t		at91rm9200ek	atmel		at91	at91rm9200ek
+at91rm9200ek_ram	arm	arm920t		at91rm9200ek	atmel		at91	at91rm9200ek:RAMBOOT
 sbc2410x	arm	arm920t		-		-		s3c24x0
 smdk2400	arm	arm920t		-		samsung		s3c24x0
 smdk2410	arm	arm920t		-		samsung		s3c24x0
diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h
index 14559f5..673abbc 100644
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@@ -33,6 +33,20 @@
 #include <asm/sizes.h>
 
 /*
+ * set some initial configurations depending on configure target
+ *
+ * at91rm9200ek_config     -> boot from 0x0 in NOR Flash at CS0
+ * at91rm9200ek_ram_config -> continue booting from 0x21000000 in RAM; lowlevel
+ *                            initialisation was done by preloader
+ */
+#ifdef CONFIG_RAMBOOT
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE 0x21000000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x10000000
+#endif
+
+/*
  * AT91C_XTAL_CLOCK is the frequency of external xtal in hertz
  * AT91C_MAIN_CLOCK is the frequency of PLLA output
  * AT91C_MASTER_CLOCK is the peripherial clock
-- 
1.7.3.2

[U-Boot] [PATCH v3 1/2] at91rm9200ek: add configure target for RAM boot

[Reinhard Meyer]

Dear Wolfgang Denk, Andreas Bie?mann,
> -at91rm9200ek	arm	arm920t		-		atmel		at91
> +at91rm9200ek	arm	arm920t		at91rm9200ek	atmel		at91	at91rm9200ek
> +at91rm9200ek_ram	arm	arm920t		at91rm9200ek	atmel		at91	at91rm9200ek:RAMBOOT

Just two technical questions:

1. Who is taking this patch in?

2. Should we, since Atmel is not likely maintaining the boards,
change relevant maintainers entries (if the person fixing
that Atmel board agrees)?

Best Regards,
Reinhard

[U-Boot] AT91: How treat outdated/unmaintained boards/code - was [PATCH v3 1/2] at91rm9200ek: add configure target for RAM boot

[Andreas Bießmann]

Dear Reinhard Meyer,

Am 31.10.2010 um 16:24 schrieb Reinhard Meyer:

> Dear Wolfgang Denk, Andreas Bie?mann,
>> -at91rm9200ek	arm	arm920t		-		atmel		at91
>> +at91rm9200ek	arm	arm920t		at91rm9200ek	atmel		at91	at91rm9200ek
>> +at91rm9200ek_ram	arm	arm920t		at91rm9200ek	atmel		at91	at91rm9200ek:RAMBOOT
> 
> Just two technical questions:
> 
> 1. Who is taking this patch in?

cause this is atmel/at91 related it should go through u-boot-atmel. The patches are on top of atmel/at91: '816dd1b AT91: add header file for the Shutdown Controller'.

> 2. Should we, since Atmel is not likely maintaining the boards,
> change relevant maintainers entries (if the person fixing
> that Atmel board agrees)?


docs/README.arm-relocation says: "Boards which are not fixed to support relocation will be REMOVED!"
If one can fix some remaining atmel (or arm in general) boards they should become the new maintainer.

3. How should we treat at91rm9200 boards which are not transformed to at91. I plan to get the at91rm9200 device drivers (at91rm9200_usart, emac) merged with at91 implementation. When we do this transition (will last til end of this year at least; not before 2011.03/maybe 2011.06) we could completely delete the deprecated drivers. Thus we break at91rm9200 boards completely (which may not working at all due to new arm relocation stuff ... but who knows/test this/is responsible for?). Should we write down/propagate a time schedule for this transition as it is done for arm relocation? Should we drop those possible not working boards in general?

Jens, you began with at91rm9200 to at91 transition as far as I know. How do you think about it? In README.at91rm9200 there is a little definition how to do the transition from at91rm9200 to at91 but no time schedule or dead line.

regards

Andreas Bie?mann

[U-Boot] AT91: How treat outdated/unmaintained boards/code - was [PATCH v3 1/2] at91rm9200ek: add configure target for RAM boot

[Wolfgang Denk]

Dear =?iso-8859-1?Q?Andreas_Bie=DFmann?=,

In message <AF6B65B0-6784-4550-86FE-CC49AD3525B6@googlemail.com> you wrote:
> 
> If one can fix some remaining atmel (or arm in general) boards they
> should become the new maintainer.

Agred - assuming they agree, too.

> 3. How should we treat at91rm9200 boards which are not transformed to
> at91. I plan to get the at91rm9200 device drivers (at91rm9200_usart,
> emac) merged with at91 implementation. When we do this transition (will
> last til end of this year at least; not before 2011.03/maybe 2011.06) we
> could completely delete the deprecated drivers. Thus we break at91rm9200
> boards completely (which may not working at all due to new arm
> relocation stuff ... but who knows/test this/is responsible for?).
> Should we write down/propagate a time schedule for this transition as it
> is done for arm relocation? Should we drop those possible not working
> boards in general?

If we know for sure that a board is broken, and nobody cares about it
we shoul remove it.   This is simple to find out if a board does not
compile, but I guess there are a number of boards that are broken in
more subtle ways.  If you are aware of any such cases, please let me
know or submit a patch to remove them.

U-Boot has sometimes been critized to carry old jetsam for too long,
thus preventing any reasonable innovation. Let's prove these guys
wrong...


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I mean, I . . . think to understand you, I just don't know  what  you
are saying ...                        - Terry Pratchett, _Soul Music_

[U-Boot] AT91: How treat outdated/unmaintained boards/code - was [PATCH v3 1/2] at91rm9200ek: add configure target for RAM boot

[Jens Scharsig]

Am 2010-10-31 17:57, schrieb Andreas Bie?mann:
> Dear Reinhard Meyer,
> 
> Am 31.10.2010 um 16:24 schrieb Reinhard Meyer:
> 
>> Dear Wolfgang Denk, Andreas Bie?mann,
>>> -at91rm9200ek	arm	arm920t		-		atmel		at91
>>> +at91rm9200ek	arm	arm920t		at91rm9200ek	atmel		at91	at91rm9200ek
>>> +at91rm9200ek_ram	arm	arm920t		at91rm9200ek	atmel		at91	at91rm9200ek:RAMBOOT
>>
>> Just two technical questions:
>>
>> 1. Who is taking this patch in?
> 
> cause this is atmel/at91 related it should go through u-boot-atmel. The patches are on top of atmel/at91: '816dd1b AT91: add header file for the Shutdown Controller'.
> 
>> 2. Should we, since Atmel is not likely maintaining the boards,
>> change relevant maintainers entries (if the person fixing
>> that Atmel board agrees)?
> 
> 
> docs/README.arm-relocation says: "Boards which are not fixed to support relocation will be REMOVED!"
> If one can fix some remaining atmel (or arm in general) boards they should become the new maintainer.
> 
> 3. How should we treat at91rm9200 boards which are not transformed to at91. I plan to get the at91rm9200 device drivers (at91rm9200_usart, emac) merged with at91 implementation. When we do this transition (will last til end of this year at least; not before 2011.03/maybe 2011.06) we could completely delete the deprecated drivers. Thus we break at91rm9200 boards completely (which may not working at all due to new arm relocation stuff ... but who knows/test this/is responsible for?). Should we write down/propagate a time schedule for this transition as it is done for arm relocation? Should we drop those possible not working boards in general?
> 
> Jens, you began with at91rm9200 to at91 transition as far as I know. How do you think about it? In README.at91rm9200 there is a little definition how to do the transition from at91rm9200 to at91 but no time schedule or dead line.

The at91 code for at91rm9200 are in git since 2010.01. We have had three
releases since then. That's enough time for the maintainer to convert
the boards.

regards Jens

[U-Boot] [PATCH v3 1/2] at91rm9200ek: add configure target for RAM boot

[Wolfgang Denk]

Dear Reinhard Meyer,

In message <4CCD8A24.6080609@emk-elektronik.de> you wrote:
>
> Just two technical questions:
> 
> 1. Who is taking this patch in?

You as current Atmel custodian, please.

> 2. Should we, since Atmel is not likely maintaining the boards,
> change relevant maintainers entries (if the person fixing
> that Atmel board agrees)?

Yes.  Andreas, if you agree please submit a patch top enter you as
maintainer of the at91rm9200ek ...

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Ever try. Ever fail. No matter. Try again. Fail again.  Fail  better.
                                                        -- S. Beckett

[U-Boot] [PATCH v3 1/2] at91rm9200ek: add configure target for RAM boot

[Andreas Bießmann]

Dear Wolfgang Denk,

Am 31.10.2010 um 18:39 schrieb Wolfgang Denk:

>> 2. Should we, since Atmel is not likely maintaining the boards,
>> change relevant maintainers entries (if the person fixing
>> that Atmel board agrees)?
> 
> Yes.  Andreas, if you agree please submit a patch top enter you as
> maintainer of the at91rm9200ek ...

Well, I just did this as I sent the at91rm9200 to at91 conversion patches for at91rm9200ek. At this time there was no maintainer signed for at91rm9200ek.

regards

Andreas Bie?mann

[U-Boot] [PATCH v4 1/2] at91rm9200ek: add configure target for RAM boot

[Andreas Bießmann]

This patch also removes now unnecessary config.mk in board directory and
make usage of new features in boards.cfg.

Signed-off-by: Andreas Bie?mann <andreas.devel@googlemail.com>
---
changes since v1:
 - add MAKEALL target
 - move settings from boards.cfg to i/c/at91rm9200ek.h
changes since v2:
 - remove MAKEALL stuff from this patch
changes since v3:
 - fix RAMBOOT address
 - based on top of 7d44af08b823b9f83e328a4bc2192ab7cbb31e9a u-boot-atmel/at91

 board/atmel/at91rm9200ek/config.mk |    2 --
 boards.cfg                         |    3 ++-
 include/configs/at91rm9200ek.h     |   14 ++++++++++++++
 3 files changed, 16 insertions(+), 3 deletions(-)
 delete mode 100644 board/atmel/at91rm9200ek/config.mk

diff --git a/board/atmel/at91rm9200ek/config.mk b/board/atmel/at91rm9200ek/config.mk
deleted file mode 100644
index c7323fe..0000000
--- a/board/atmel/at91rm9200ek/config.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-# currently only NOR flash booting is supported
-CONFIG_SYS_TEXT_BASE = 0x10000000
diff --git a/boards.cfg b/boards.cfg
index 6c2a667..6f7dc54 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -359,7 +359,8 @@ modnet50	arm	arm720t
 lpc2292sodimm	arm	arm720t		-		-		lpc2292
 eb_cpux9k2	arm	arm920t		-		BuS		at91
 at91rm9200dk	arm	arm920t		-		atmel		at91rm9200
-at91rm9200ek	arm	arm920t		-		atmel		at91
+at91rm9200ek	arm	arm920t		at91rm9200ek	atmel		at91	at91rm9200ek
+at91rm9200ek_ram	arm	arm920t		at91rm9200ek	atmel		at91	at91rm9200ek:RAMBOOT
 sbc2410x	arm	arm920t		-		-		s3c24x0
 smdk2400	arm	arm920t		-		samsung		s3c24x0
 smdk2410	arm	arm920t		-		samsung		s3c24x0
diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h
index 14559f5..ba2e9d3 100644
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@@ -33,6 +33,20 @@
 #include <asm/sizes.h>
 
 /*
+ * set some initial configurations depending on configure target
+ *
+ * at91rm9200ek_config     -> boot from 0x0 in NOR Flash at CS0
+ * at91rm9200ek_ram_config -> continue booting from 0x20100000 in RAM; lowlevel
+ *                            initialisation was done by some preloader
+ */
+#ifdef CONFIG_RAMBOOT
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE 0x20100000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x10000000
+#endif
+
+/*
  * AT91C_XTAL_CLOCK is the frequency of external xtal in hertz
  * AT91C_MAIN_CLOCK is the frequency of PLLA output
  * AT91C_MASTER_CLOCK is the peripherial clock
-- 
1.7.3.2

[U-Boot] [PATCH v4 2/2] MAKEALL: fix AT91

[Andreas Bießmann]

 * add boards_by_soc()
 * remove boards already in boards.cfg from LIST_AT91

Signed-off-by: Andreas Bie?mann <andreas.devel@googlemail.com>
---
introduced in v3

changes since v3:
 - none
 - based on top of 7d44af08b823b9f83e328a4bc2192ab7cbb31e9a u-boot-atmel/at91

 MAKEALL |   18 +++---------------
 1 files changed, 3 insertions(+), 15 deletions(-)

diff --git a/MAKEALL b/MAKEALL
index c54c6e8..1b21df6 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -181,6 +181,7 @@ boards_by_field()
 }
 boards_by_arch() { boards_by_field 2 "$@" ; }
 boards_by_cpu()  { boards_by_field 3 "$@" ; }
+boards_by_soc()  { boards_by_field 6 "$@" ; }
 
 #########################################################################
 ## MPC5xx Systems
@@ -433,11 +434,8 @@ LIST_ARMV7="		\
 ## AT91 Systems
 #########################################################################
 
-LIST_at91="			\
-	afeb9260		\
-	at91cap9adk		\
-	at91rm9200dk		\
-	at91rm9200ek		\
+LIST_at91="$(boards_by_soc at91)\
+	$(boards_by_soc at91rm9200)\
 	at91sam9260ek		\
 	at91sam9261ek		\
 	at91sam9263ek		\
@@ -445,19 +443,9 @@ LIST_at91="			\
 	at91sam9g20ek		\
 	at91sam9m10g45ek	\
 	at91sam9rlek		\
-	cmc_pu2			\
 	CPUAT91			\
 	CPU9260			\
 	CPU9G20			\
-	csb637			\
-	eb_cpux9k2		\
-	kb9202			\
-	meesc			\
-	mp2usb			\
-	m501sk			\
-	otc570			\
-	pm9261			\
-	pm9263			\
 	pm9g45			\
 	SBC35_A9G20		\
 	TNY_A9260		\
-- 
1.7.3.2

[U-Boot] [PATCH v3 2/2] MAKEALL: fix AT91

[Andreas Bießmann]

 * add boards_by_soc()
 * remove boards already in boards.cfg from LIST_AT91

Signed-off-by: Andreas Bie?mann <andreas.devel@googlemail.com>
---
implement requested functions in MAKEALL

 MAKEALL |   18 +++---------------
 1 files changed, 3 insertions(+), 15 deletions(-)

diff --git a/MAKEALL b/MAKEALL
index c54c6e8..1b21df6 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -181,6 +181,7 @@ boards_by_field()
 }
 boards_by_arch() { boards_by_field 2 "$@" ; }
 boards_by_cpu()  { boards_by_field 3 "$@" ; }
+boards_by_soc()  { boards_by_field 6 "$@" ; }
 
 #########################################################################
 ## MPC5xx Systems
@@ -433,11 +434,8 @@ LIST_ARMV7="		\
 ## AT91 Systems
 #########################################################################
 
-LIST_at91="			\
-	afeb9260		\
-	at91cap9adk		\
-	at91rm9200dk		\
-	at91rm9200ek		\
+LIST_at91="$(boards_by_soc at91)\
+	$(boards_by_soc at91rm9200)\
 	at91sam9260ek		\
 	at91sam9261ek		\
 	at91sam9263ek		\
@@ -445,19 +443,9 @@ LIST_at91="			\
 	at91sam9g20ek		\
 	at91sam9m10g45ek	\
 	at91sam9rlek		\
-	cmc_pu2			\
 	CPUAT91			\
 	CPU9260			\
 	CPU9G20			\
-	csb637			\
-	eb_cpux9k2		\
-	kb9202			\
-	meesc			\
-	mp2usb			\
-	m501sk			\
-	otc570			\
-	pm9261			\
-	pm9263			\
 	pm9g45			\
 	SBC35_A9G20		\
 	TNY_A9260		\
-- 
1.7.3.2

[U-Boot] [PATCH] at91rm9200ek: add configure target for RAM boot

[Reinhard Meyer]

Dear Andreas Bie?mann,
> This patch also removes now unnecessary config.mk in board directory and make
> usage of new features in boards.cfg.
> 
> Signed-off-by: Andreas Bie?mann <andreas.devel@googlemail.com>
> ---
>  board/atmel/at91rm9200ek/config.mk |    2 --
>  boards.cfg                         |    3 ++-
>  2 files changed, 2 insertions(+), 3 deletions(-)
>  delete mode 100644 board/atmel/at91rm9200ek/config.mk
V4 of this patch applied to u-boot-atmel/at91-next

Thanks,
Reinhard

[U-Boot] [PATCH] at91rm9200ek: add configure target for RAM boot

[Andreas Bießmann]

Dear Reinhard Meyer,

Am 08.11.2010 um 09:24 schrieb Reinhard Meyer:

> Dear Andreas Bie?mann,
>> This patch also removes now unnecessary config.mk in board directory and make
>> usage of new features in boards.cfg.
>> 
>> Signed-off-by: Andreas Bie?mann <andreas.devel@googlemail.com>
>> ---
>> board/atmel/at91rm9200ek/config.mk |    2 --
>> boards.cfg                         |    3 ++-
>> 2 files changed, 2 insertions(+), 3 deletions(-)
>> delete mode 100644 board/atmel/at91rm9200ek/config.mk
> V4 of this patch applied to u-boot-atmel/at91-next

does this patch go into v2010.12 ? boards.cfg have changed and this patch will not longer apply cleanly, do you need an update?

regards

Andreas Bie?mann