* [Qemu-devel] [Bug 604166] [NEW] QEMU Floating Point Exception and Crash while Emulating "Cirrus Logic 5446 PCI" in Win98
@ 2010-07-11 4:09 David Johnston
2011-01-01 14:35 ` [Qemu-devel] [Bug 604166] " Aurelien Jarno
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: David Johnston @ 2010-07-11 4:09 UTC (permalink / raw)
To: qemu-devel
Public bug reported:
My build of QEMU i386-softmmu crashes with a "floating point exception"
upon Win98SE startup when "Cirrus Logic 5446 PCI" display adapter
properties are set above 16 colors and/or 640 x 480".
My Setup:
I've been working to configure Windows 98 SE for video games in QEMU
(initially Grim Fandango and Masters of Orion 2, later Planescape
Torment and others) on a Mac OS X 10.6.4 host (gcc version 4.2.1). I
have reproduced this bug when building from both 0.12.50-trunk and
0.12.4-stable. My builds and installation are standard except that they
use the more recent SeaBIOS-6.0 binary as $PREFIX/share/qemu/seabios.bin
in order to work around the issue described in Bug #521994. These are my
current startup parameters:
> #! /bin/bash -
>
> GUESTNAME=win98-base.qemu
> VMHOME=/vol/$GUESTNAME
> RAMSIZE=512
> #DRIVES="$DRIVES -drive file=$VMHOME/fs/fda,if=floppy"
> DRIVES="$DRIVES -drive file=$VMHOME/fs/hdd.qcow2,if=ide,media=disk"
> #DRIVES="$DRIVES -drive file=$VMHOME/ssw/win98se-oem.iso,if=ide,media=cdrom"
> BOOTDISK=c
>
> qemu\
> -M pc -cpu pentium3 -m $RAMSIZE\
> -vga cirrus -soundhw pcspk,es1370 -net nic,model=ne2k_pci\
> -localtime\
> -monitor stdio\
> -name $GUESTNAME\
> -boot $BOOTDISK\
> $DRIVES
The State of QEMU/Win98 Emulation:
The initial Windows 98 installation does not properly detect most PCI
devices (ie. es1370, ne2k_pci). There is a solution to this involving a
manual reinstallation of the device named "Plug and Play Bios (fail
safe)" with the win98 "PCI Bus" driver, as described here <http://qemu-
forum.ipi.fi/viewtopic.php?f=9&t=3072>. This process reveals many
previously undetected devices and is currently necessary for win98 sound
and networking support.
Unlike sound and network support, advanced graphics support is available
without the PCI Bus workaround via a display adapter identified as
"Cirrus Logic" in Device Manager. **This "Cirrus Logic" adapter does
support higher resolutions and color depth, but does not work properly
in some applications.** For instance, when running the intro to Grim
Fandango, many colors are shown incorrectly and the system slows and
freezes. One of the devices revealed and installed after the PCI Bus
workaround is the "Cirrus Logic 5446 PCI" display adapter, and I had
hoped that configuring this device might solve these problems.
The Bug:
Device Manager lists "Cirrus Logic 5446 PCI" alongside the previously
discovered "Cirrus Logic" device, but due to resource conflicts, "Cirrus
Logic 5446 PCI" is effectively disabled until "Cirrus Logic" is either
disabled or uninstalled. Unfortunately, disabling "Cirrus Logic" and
using "Cirrus Logic 5446 PCI" only makes things worse, for using any
display settings higher than 16 colors and 640x480 will always cause a
floating point exception on startup. This crash occurs after the login
prompt and during the Windows 98 startup chime.
I hope that someone will be able to make sense of all of this.
Until then,
D. Johnston
** Affects: qemu
Importance: Undecided
Status: New
--
QEMU Floating Point Exception and Crash while Emulating "Cirrus Logic 5446 PCI" in Win98
https://bugs.launchpad.net/bugs/604166
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
Status in QEMU: New
Bug description:
My build of QEMU i386-softmmu crashes with a "floating point exception" upon Win98SE startup when "Cirrus Logic 5446 PCI" display adapter properties are set above 16 colors and/or 640 x 480".
My Setup:
I've been working to configure Windows 98 SE for video games in QEMU (initially Grim Fandango and Masters of Orion 2, later Planescape Torment and others) on a Mac OS X 10.6.4 host (gcc version 4.2.1). I have reproduced this bug when building from both 0.12.50-trunk and 0.12.4-stable. My builds and installation are standard except that they use the more recent SeaBIOS-6.0 binary as $PREFIX/share/qemu/seabios.bin in order to work around the issue described in Bug #521994. These are my current startup parameters:
> #! /bin/bash -
>
> GUESTNAME=win98-base.qemu
> VMHOME=/vol/$GUESTNAME
> RAMSIZE=512
> #DRIVES="$DRIVES -drive file=$VMHOME/fs/fda,if=floppy"
> DRIVES="$DRIVES -drive file=$VMHOME/fs/hdd.qcow2,if=ide,media=disk"
> #DRIVES="$DRIVES -drive file=$VMHOME/ssw/win98se-oem.iso,if=ide,media=cdrom"
> BOOTDISK=c
>
> qemu\
> -M pc -cpu pentium3 -m $RAMSIZE\
> -vga cirrus -soundhw pcspk,es1370 -net nic,model=ne2k_pci\
> -localtime\
> -monitor stdio\
> -name $GUESTNAME\
> -boot $BOOTDISK\
> $DRIVES
The State of QEMU/Win98 Emulation:
The initial Windows 98 installation does not properly detect most PCI devices (ie. es1370, ne2k_pci). There is a solution to this involving a manual reinstallation of the device named "Plug and Play Bios (fail safe)" with the win98 "PCI Bus" driver, as described here <http://qemu-forum.ipi.fi/viewtopic.php?f=9&t=3072>. This process reveals many previously undetected devices and is currently necessary for win98 sound and networking support.
Unlike sound and network support, advanced graphics support is available without the PCI Bus workaround via a display adapter identified as "Cirrus Logic" in Device Manager. **This "Cirrus Logic" adapter does support higher resolutions and color depth, but does not work properly in some applications.** For instance, when running the intro to Grim Fandango, many colors are shown incorrectly and the system slows and freezes. One of the devices revealed and installed after the PCI Bus workaround is the "Cirrus Logic 5446 PCI" display adapter, and I had hoped that configuring this device might solve these problems.
The Bug:
Device Manager lists "Cirrus Logic 5446 PCI" alongside the previously discovered "Cirrus Logic" device, but due to resource conflicts, "Cirrus Logic 5446 PCI" is effectively disabled until "Cirrus Logic" is either disabled or uninstalled. Unfortunately, disabling "Cirrus Logic" and using "Cirrus Logic 5446 PCI" only makes things worse, for using any display settings higher than 16 colors and 640x480 will always cause a floating point exception on startup. This crash occurs after the login prompt and during the Windows 98 startup chime.
I hope that someone will be able to make sense of all of this.
Until then,
D. Johnston
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Qemu-devel] [Bug 604166] Re: QEMU Floating Point Exception and Crash while Emulating "Cirrus Logic 5446 PCI" in Win98
2010-07-11 4:09 [Qemu-devel] [Bug 604166] [NEW] QEMU Floating Point Exception and Crash while Emulating "Cirrus Logic 5446 PCI" in Win98 David Johnston
@ 2011-01-01 14:35 ` Aurelien Jarno
2011-01-04 21:28 ` Aurelien Jarno
2011-02-20 17:14 ` Aurelien Jarno
2 siblings, 0 replies; 4+ messages in thread
From: Aurelien Jarno @ 2011-01-01 14:35 UTC (permalink / raw)
To: qemu-devel
** Changed in: qemu
Status: New => In Progress
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/604166
Title:
QEMU Floating Point Exception and Crash while Emulating "Cirrus Logic 5446 PCI" in Win98
Status in QEMU:
In Progress
Bug description:
My build of QEMU i386-softmmu crashes with a "floating point exception" upon Win98SE startup when "Cirrus Logic 5446 PCI" display adapter properties are set above 16 colors and/or 640 x 480".
My Setup:
I've been working to configure Windows 98 SE for video games in QEMU (initially Grim Fandango and Masters of Orion 2, later Planescape Torment and others) on a Mac OS X 10.6.4 host (gcc version 4.2.1). I have reproduced this bug when building from both 0.12.50-trunk and 0.12.4-stable. My builds and installation are standard except that they use the more recent SeaBIOS-6.0 binary as $PREFIX/share/qemu/seabios.bin in order to work around the issue described in Bug #521994. These are my current startup parameters:
> #! /bin/bash -
>
> GUESTNAME=win98-base.qemu
> VMHOME=/vol/$GUESTNAME
> RAMSIZE=512
> #DRIVES="$DRIVES -drive file=$VMHOME/fs/fda,if=floppy"
> DRIVES="$DRIVES -drive file=$VMHOME/fs/hdd.qcow2,if=ide,media=disk"
> #DRIVES="$DRIVES -drive file=$VMHOME/ssw/win98se-oem.iso,if=ide,media=cdrom"
> BOOTDISK=c
>
> qemu\
> -M pc -cpu pentium3 -m $RAMSIZE\
> -vga cirrus -soundhw pcspk,es1370 -net nic,model=ne2k_pci\
> -localtime\
> -monitor stdio\
> -name $GUESTNAME\
> -boot $BOOTDISK\
> $DRIVES
The State of QEMU/Win98 Emulation:
The initial Windows 98 installation does not properly detect most PCI devices (ie. es1370, ne2k_pci). There is a solution to this involving a manual reinstallation of the device named "Plug and Play Bios (fail safe)" with the win98 "PCI Bus" driver, as described here <http://qemu-forum.ipi.fi/viewtopic.php?f=9&t=3072>. This process reveals many previously undetected devices and is currently necessary for win98 sound and networking support.
Unlike sound and network support, advanced graphics support is available without the PCI Bus workaround via a display adapter identified as "Cirrus Logic" in Device Manager. **This "Cirrus Logic" adapter does support higher resolutions and color depth, but does not work properly in some applications.** For instance, when running the intro to Grim Fandango, many colors are shown incorrectly and the system slows and freezes. One of the devices revealed and installed after the PCI Bus workaround is the "Cirrus Logic 5446 PCI" display adapter, and I had hoped that configuring this device might solve these problems.
The Bug:
Device Manager lists "Cirrus Logic 5446 PCI" alongside the previously discovered "Cirrus Logic" device, but due to resource conflicts, "Cirrus Logic 5446 PCI" is effectively disabled until "Cirrus Logic" is either disabled or uninstalled. Unfortunately, disabling "Cirrus Logic" and using "Cirrus Logic 5446 PCI" only makes things worse, for using any display settings higher than 16 colors and 640x480 will always cause a floating point exception on startup. This crash occurs after the login prompt and during the Windows 98 startup chime.
I hope that someone will be able to make sense of all of this.
Until then,
D. Johnston
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Qemu-devel] [Bug 604166] Re: QEMU Floating Point Exception and Crash while Emulating "Cirrus Logic 5446 PCI" in Win98
2010-07-11 4:09 [Qemu-devel] [Bug 604166] [NEW] QEMU Floating Point Exception and Crash while Emulating "Cirrus Logic 5446 PCI" in Win98 David Johnston
2011-01-01 14:35 ` [Qemu-devel] [Bug 604166] " Aurelien Jarno
@ 2011-01-04 21:28 ` Aurelien Jarno
2011-02-20 17:14 ` Aurelien Jarno
2 siblings, 0 replies; 4+ messages in thread
From: Aurelien Jarno @ 2011-01-04 21:28 UTC (permalink / raw)
To: qemu-devel
** Changed in: qemu
Status: In Progress => Fix Committed
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/604166
Title:
QEMU Floating Point Exception and Crash while Emulating "Cirrus Logic 5446 PCI" in Win98
Status in QEMU:
Fix Committed
Bug description:
My build of QEMU i386-softmmu crashes with a "floating point exception" upon Win98SE startup when "Cirrus Logic 5446 PCI" display adapter properties are set above 16 colors and/or 640 x 480".
My Setup:
I've been working to configure Windows 98 SE for video games in QEMU (initially Grim Fandango and Masters of Orion 2, later Planescape Torment and others) on a Mac OS X 10.6.4 host (gcc version 4.2.1). I have reproduced this bug when building from both 0.12.50-trunk and 0.12.4-stable. My builds and installation are standard except that they use the more recent SeaBIOS-6.0 binary as $PREFIX/share/qemu/seabios.bin in order to work around the issue described in Bug #521994. These are my current startup parameters:
> #! /bin/bash -
>
> GUESTNAME=win98-base.qemu
> VMHOME=/vol/$GUESTNAME
> RAMSIZE=512
> #DRIVES="$DRIVES -drive file=$VMHOME/fs/fda,if=floppy"
> DRIVES="$DRIVES -drive file=$VMHOME/fs/hdd.qcow2,if=ide,media=disk"
> #DRIVES="$DRIVES -drive file=$VMHOME/ssw/win98se-oem.iso,if=ide,media=cdrom"
> BOOTDISK=c
>
> qemu\
> -M pc -cpu pentium3 -m $RAMSIZE\
> -vga cirrus -soundhw pcspk,es1370 -net nic,model=ne2k_pci\
> -localtime\
> -monitor stdio\
> -name $GUESTNAME\
> -boot $BOOTDISK\
> $DRIVES
The State of QEMU/Win98 Emulation:
The initial Windows 98 installation does not properly detect most PCI devices (ie. es1370, ne2k_pci). There is a solution to this involving a manual reinstallation of the device named "Plug and Play Bios (fail safe)" with the win98 "PCI Bus" driver, as described here <http://qemu-forum.ipi.fi/viewtopic.php?f=9&t=3072>. This process reveals many previously undetected devices and is currently necessary for win98 sound and networking support.
Unlike sound and network support, advanced graphics support is available without the PCI Bus workaround via a display adapter identified as "Cirrus Logic" in Device Manager. **This "Cirrus Logic" adapter does support higher resolutions and color depth, but does not work properly in some applications.** For instance, when running the intro to Grim Fandango, many colors are shown incorrectly and the system slows and freezes. One of the devices revealed and installed after the PCI Bus workaround is the "Cirrus Logic 5446 PCI" display adapter, and I had hoped that configuring this device might solve these problems.
The Bug:
Device Manager lists "Cirrus Logic 5446 PCI" alongside the previously discovered "Cirrus Logic" device, but due to resource conflicts, "Cirrus Logic 5446 PCI" is effectively disabled until "Cirrus Logic" is either disabled or uninstalled. Unfortunately, disabling "Cirrus Logic" and using "Cirrus Logic 5446 PCI" only makes things worse, for using any display settings higher than 16 colors and 640x480 will always cause a floating point exception on startup. This crash occurs after the login prompt and during the Windows 98 startup chime.
I hope that someone will be able to make sense of all of this.
Until then,
D. Johnston
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Qemu-devel] [Bug 604166] Re: QEMU Floating Point Exception and Crash while Emulating "Cirrus Logic 5446 PCI" in Win98
2010-07-11 4:09 [Qemu-devel] [Bug 604166] [NEW] QEMU Floating Point Exception and Crash while Emulating "Cirrus Logic 5446 PCI" in Win98 David Johnston
2011-01-01 14:35 ` [Qemu-devel] [Bug 604166] " Aurelien Jarno
2011-01-04 21:28 ` Aurelien Jarno
@ 2011-02-20 17:14 ` Aurelien Jarno
2 siblings, 0 replies; 4+ messages in thread
From: Aurelien Jarno @ 2011-02-20 17:14 UTC (permalink / raw)
To: qemu-devel
** Changed in: qemu
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/604166
Title:
QEMU Floating Point Exception and Crash while Emulating "Cirrus Logic
5446 PCI" in Win98
Status in QEMU:
Fix Released
Bug description:
My build of QEMU i386-softmmu crashes with a "floating point
exception" upon Win98SE startup when "Cirrus Logic 5446 PCI" display
adapter properties are set above 16 colors and/or 640 x 480".
My Setup:
I've been working to configure Windows 98 SE for video games in QEMU
(initially Grim Fandango and Masters of Orion 2, later Planescape
Torment and others) on a Mac OS X 10.6.4 host (gcc version 4.2.1). I
have reproduced this bug when building from both 0.12.50-trunk and
0.12.4-stable. My builds and installation are standard except that
they use the more recent SeaBIOS-6.0 binary as
$PREFIX/share/qemu/seabios.bin in order to work around the issue
described in Bug #521994. These are my current startup parameters:
> #! /bin/bash -
>
> GUESTNAME=win98-base.qemu
> VMHOME=/vol/$GUESTNAME
> RAMSIZE=512
> #DRIVES="$DRIVES -drive file=$VMHOME/fs/fda,if=floppy"
> DRIVES="$DRIVES -drive file=$VMHOME/fs/hdd.qcow2,if=ide,media=disk"
> #DRIVES="$DRIVES -drive file=$VMHOME/ssw/win98se-oem.iso,if=ide,media=cdrom"
> BOOTDISK=c
>
> qemu\
> -M pc -cpu pentium3 -m $RAMSIZE\
> -vga cirrus -soundhw pcspk,es1370 -net nic,model=ne2k_pci\
> -localtime\
> -monitor stdio\
> -name $GUESTNAME\
> -boot $BOOTDISK\
> $DRIVES
The State of QEMU/Win98 Emulation:
The initial Windows 98 installation does not properly detect most PCI
devices (ie. es1370, ne2k_pci). There is a solution to this involving
a manual reinstallation of the device named "Plug and Play Bios (fail
safe)" with the win98 "PCI Bus" driver, as described here <http
://qemu-forum.ipi.fi/viewtopic.php?f=9&t=3072>. This process reveals
many previously undetected devices and is currently necessary for
win98 sound and networking support.
Unlike sound and network support, advanced graphics support is
available without the PCI Bus workaround via a display adapter
identified as "Cirrus Logic" in Device Manager. **This "Cirrus Logic"
adapter does support higher resolutions and color depth, but does not
work properly in some applications.** For instance, when running the
intro to Grim Fandango, many colors are shown incorrectly and the
system slows and freezes. One of the devices revealed and installed
after the PCI Bus workaround is the "Cirrus Logic 5446 PCI" display
adapter, and I had hoped that configuring this device might solve
these problems.
The Bug:
Device Manager lists "Cirrus Logic 5446 PCI" alongside the previously
discovered "Cirrus Logic" device, but due to resource conflicts,
"Cirrus Logic 5446 PCI" is effectively disabled until "Cirrus Logic"
is either disabled or uninstalled. Unfortunately, disabling "Cirrus
Logic" and using "Cirrus Logic 5446 PCI" only makes things worse, for
using any display settings higher than 16 colors and 640x480 will
always cause a floating point exception on startup. This crash occurs
after the login prompt and during the Windows 98 startup chime.
I hope that someone will be able to make sense of all of this.
Until then,
D. Johnston
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-02-20 17:21 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-07-11 4:09 [Qemu-devel] [Bug 604166] [NEW] QEMU Floating Point Exception and Crash while Emulating "Cirrus Logic 5446 PCI" in Win98 David Johnston
2011-01-01 14:35 ` [Qemu-devel] [Bug 604166] " Aurelien Jarno
2011-01-04 21:28 ` Aurelien Jarno
2011-02-20 17:14 ` Aurelien Jarno
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.