* Linux 2.6.38-rc1
@ 2011-01-18 23:54 Linus Torvalds
2011-01-19 2:07 ` Linus Torvalds
` (4 more replies)
0 siblings, 5 replies; 69+ messages in thread
From: Linus Torvalds @ 2011-01-18 23:54 UTC (permalink / raw)
To: Linux Kernel Mailing List
It's been two weeks, and the merge window for 2.6.38 is thus closed.
And an interesting merge window it has been.
This merge window saw the introduction of two of my favorite new features:
- the use of group scheduling to give nicer interactive behavior in
the presence of "traditional" UNIX loads (ie terminal windows with
heavy loads like a "make -j8" or similar) by giving tty sessions
separate groups (the SCHED_AUTOGROUP config variable)
- Nick's new (well, "new" - it's been brewing for a long time)
RCU-based path name lookup.
So the autogroup thing is really more of a technical gimmick than
anything else, but it really works very well for the kinds of things
it is designed for. If you still do "real work" in a terminal window,
you're likely to appreciate it. Compile in parallel in one window,
watch a movie in another, and the movie is really smooth. It can be
very noticeable indeed. It's not a panacea, but it's nice for what it
is.
The RCU-based name lookup is at the other end of the spectrum - the
absolute anti-gimmick. It's some seriously good stuff, and gets rid of
the last main global lock that really tends to hurt some kernel loads.
The dentry lock is no longer a big serializing issue. What's really
nice about it is that it actually improves performance a lot even for
single-threaded loads (on an SMP kernel), because it gets rid of some
of the most expensive parts of path component lookup, which was the
d_lock on every component lookup. So I'm seeing improvements of 30-50%
on some seriously pathname-lookup intensive loads.
So last cycle, we got rid of most of the BKL - which was really nice,
but practically speaking it was not a very important lock any more.
This cycle was different: Nick's series (and thanks to everybody else
who helped) really help a very real scalability and performance issue.
And we used to be rather good at pathname lookup before - now we're
just a whole lot better.
Now, those two are my personal favorites, but that's not to say that
you may care. Not all loads are all that name-lookup heavy, and the
scheduler auto-grouping may not matter for you. So to round the thing
up, we have a metric ton of other features, with drivers as usual
accounting for about half of the changes. The most noticeable part
during the merge window was the DRI updates, which caused some pain.
The most obvious fallout of that should all have been fixed, and we
should now have support for the AMD Fusion stuff along with some Fermi
acceleration support. And several updates to the Intel driver too.
But never fear. If you don't care about pathname lookup, scheduling or
graphics cards, I'm sure you can find changes to be excited about,
whatever your area of interest is. SCSI target infrastructure? Or all
the architecture updates (notably ARM and blackfin platform
additions)? Or just the sound and media drivers? Go look at your
favorite area in the git tree, I suspect it has gotten some love.
And as usual, report any regressions to the lists and the appropriate
authorities.
Linus
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1
2011-01-18 23:54 Linux 2.6.38-rc1 Linus Torvalds
@ 2011-01-19 2:07 ` Linus Torvalds
2011-01-19 3:42 ` Justin Mattock
2011-01-23 8:13 ` Linux 2.6.38-rc1 Török Edwin
2011-01-19 7:39 ` Linux 2.6.38-rc1 doesn't boot Markus Trippelsdorf
` (3 subsequent siblings)
4 siblings, 2 replies; 69+ messages in thread
From: Linus Torvalds @ 2011-01-19 2:07 UTC (permalink / raw)
To: Linux Kernel Mailing List
On Tue, Jan 18, 2011 at 3:54 PM, Linus Torvalds
<torvalds@linux-foundation.org> wrote:
>
> It's been two weeks, and the merge window for 2.6.38 is thus closed.
Oh, and it looks like mirroring from master.kernel.org is being very
slow, possibly at least partly because the conversion to
xv-compression seems to be going on (who knows - there's obviously a
script going over all the public files recompressing them from gz to
xz, but it may be some kind of dry-run and not final).
And I may also have managed to hit the weekly rsync "check
_everything_" window too. So rsync likely isn't just checking and
syncing new files, but checksumming every single file that gets
mirrored out and re-verifying it.
End result: it looks like git.kernel.org and the ftp mirrors are going
to take hours to update. So if you don't see 2.6.38-rc1 yet, and you
don't have an account on kernel.org and can fetch it directly from
master, don't worry. It will mirror out eventually, but it's going to
take some time.
Sit back, relax, and sip some foofy drink. It will all work out in the end.
Linus
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1
2011-01-19 2:07 ` Linus Torvalds
@ 2011-01-19 3:42 ` Justin Mattock
2011-01-19 3:53 ` Linus Torvalds
2011-01-23 8:13 ` Linux 2.6.38-rc1 Török Edwin
1 sibling, 1 reply; 69+ messages in thread
From: Justin Mattock @ 2011-01-19 3:42 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Linux Kernel Mailing List
On Jan 18, 2011, at 6:07 PM, Linus Torvalds wrote:
> On Tue, Jan 18, 2011 at 3:54 PM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
>>
>> It's been two weeks, and the merge window for 2.6.38 is thus closed.
>
> Oh, and it looks like mirroring from master.kernel.org is being very
> slow, possibly at least partly because the conversion to
> xv-compression seems to be going on (who knows - there's obviously a
> script going over all the public files recompressing them from gz to
> xz, but it may be some kind of dry-run and not final).
>
> And I may also have managed to hit the weekly rsync "check
> _everything_" window too. So rsync likely isn't just checking and
> syncing new files, but checksumming every single file that gets
> mirrored out and re-verifying it.
>
> End result: it looks like git.kernel.org and the ftp mirrors are going
> to take hours to update. So if you don't see 2.6.38-rc1 yet, and you
> don't have an account on kernel.org and can fetch it directly from
> master, don't worry. It will mirror out eventually, but it's going to
> take some time.
>
> Sit back, relax, and sip some foofy drink. It will all work out in
> the end.
>
> Linus
> --
> To unsubscribe from this list: send the line "unsubscribe linux-
> kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
wheres the changelog? (gotta narcissistically check to see if I made
it in)..
Justin P. Mattock
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1
2011-01-19 3:42 ` Justin Mattock
@ 2011-01-19 3:53 ` Linus Torvalds
2011-01-19 4:05 ` Justin Mattock
2011-01-19 5:10 ` nobody
0 siblings, 2 replies; 69+ messages in thread
From: Linus Torvalds @ 2011-01-19 3:53 UTC (permalink / raw)
To: Justin Mattock; +Cc: Linux Kernel Mailing List
On Tue, Jan 18, 2011 at 7:42 PM, Justin Mattock <justinmattock@gmail.com> wrote:
>
> wheres the changelog? (gotta narcissistically check to see if I made it
> in)..
I only do changelogs in the email if they are small enough to be
reasonable. -rc1 never is. -rc2 seldom is. Usually it's -rc3 and up.
In this case, even just the shortlog would have been about ten
thousand lines and 480kB, so it really isn't going to fly through lkml
(and nobody would read it all anyway)
But you can get git, and do
git shortlog v2.6.37..v2.6.38-rc1
to get the shortlog. Or you can download the whole changelog from
kernel.org next to the kernel sources. The git approach is better,
because you can ask for the log for just specific files or
subdirectories that you are interested in, which turns the flood into
something much more manageable.
But, since you asked, we can just do
git shortlog --author=justin v2.6.37..v2.6.38-rc1
which is appended. Go Justin!
Linus
PS. No. I will not make personalized shortlogs for everybody who asks.
---
Justin P. Mattock (8):
staging: Fix typos in rt2860
spi/dw_spi Typo change diable to disable.
spi/topcliff: Typo fix threhold to threshold
media: comment typo fix diable -> disable.
wireless: comment typo fix diable -> disable.
m68k: fix comment typo diable -> disable.
drivers: fix comment typo diable -> disable.
ppc: fix comment typo singal -> signal
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1
2011-01-19 3:53 ` Linus Torvalds
@ 2011-01-19 4:05 ` Justin Mattock
2011-01-19 5:10 ` nobody
1 sibling, 0 replies; 69+ messages in thread
From: Justin Mattock @ 2011-01-19 4:05 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Linux Kernel Mailing List
On Jan 18, 2011, at 7:53 PM, Linus Torvalds wrote:
> On Tue, Jan 18, 2011 at 7:42 PM, Justin Mattock <justinmattock@gmail.com
> > wrote:
>>
>> wheres the changelog? (gotta narcissistically check to see if I
>> made it
>> in)..
>
> I only do changelogs in the email if they are small enough to be
> reasonable. -rc1 never is. -rc2 seldom is. Usually it's -rc3 and up.
> In this case, even just the shortlog would have been about ten
> thousand lines and 480kB, so it really isn't going to fly through lkml
> (and nobody would read it all anyway)
>
never realized that... always thought there was a changelog in your
posts for releases
> But you can get git, and do
>
> git shortlog v2.6.37..v2.6.38-rc1
>
> to get the shortlog. Or you can download the whole changelog from
> kernel.org next to the kernel sources. The git approach is better,
> because you can ask for the log for just specific files or
> subdirectories that you are interested in, which turns the flood into
> something much more manageable.
>
git is where Ill see then, and/or if you post it on an email
> But, since you asked, we can just do
>
> git shortlog --author=justin v2.6.37..v2.6.38-rc1
>
a new way to use git...(nice!!)
> which is appended. Go Justin!
>
> Linus
>
> PS. No. I will not make personalized shortlogs for everybody who asks.
>
no... thats not a good idea
> ---
> Justin P. Mattock (8):
> staging: Fix typos in rt2860
> spi/dw_spi Typo change diable to disable.
> spi/topcliff: Typo fix threhold to threshold
> media: comment typo fix diable -> disable.
> wireless: comment typo fix diable -> disable.
> m68k: fix comment typo diable -> disable.
> drivers: fix comment typo diable -> disable.
> ppc: fix comment typo singal -> signal
was wondering what happened to those.. all right... and Now have my
answer!!
thanks for the response...
Justin P. Mattock
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1
2011-01-19 3:53 ` Linus Torvalds
2011-01-19 4:05 ` Justin Mattock
@ 2011-01-19 5:10 ` nobody
2011-01-19 5:42 ` Linus Torvalds
1 sibling, 1 reply; 69+ messages in thread
From: nobody @ 2011-01-19 5:10 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Linux Kernel Mailing List
> But you can get git, and do
>
> git shortlog v2.6.37..v2.6.38-rc1
>
> to get the shortlog. Or you can download the whole changelog from
> kernel.org next to the kernel sources. The git approach is better,
> because you can ask for the log for just specific files or
> subdirectories that you are interested in, which turns the flood into
> something much more manageable.
i wish i could do that for everything. i am pulling up to 500MiB every
-rc cycle and mostly codes for hardwares i don't have. not just that
sometimes changes to even pertain to my machine (so no, `git clone
--depth 1' is not what i have in mind).
it would be nice to have a module or a script for git that would work
with kconfig. so instead of pull-config-compile, one would
config-pull-compile. (ok some initial pull for kconfig stuff first but that
would be all).
i asked this from folks at #git channel and they suggested, because
of the way git works, "git thinks in terms of trees not directories", i
should ask you to see if it's doable?
needless to say that this should also help with the load on kernel.org as
well, since i imagine people that pull from git to compile their own
kernel by definition don't need everything.
regards,
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1
2011-01-19 5:10 ` nobody
@ 2011-01-19 5:42 ` Linus Torvalds
2011-01-19 5:56 ` Linus Torvalds
2011-01-21 3:23 ` tag&track [Re: Linux 2.6.38-rc1] nobody
0 siblings, 2 replies; 69+ messages in thread
From: Linus Torvalds @ 2011-01-19 5:42 UTC (permalink / raw)
To: nobody; +Cc: Linux Kernel Mailing List
On Tue, Jan 18, 2011 at 9:10 PM, nobody <darwinskernel@gmail.com> wrote:
>
> i wish i could do that for everything. i am pulling up to 500MiB every
> -rc cycle and mostly codes for hardwares i don't have.
No you're not.
The *WHOLE* Linux kernel git archive fits in one 388M pack. That's not
some -rc release, that's the whole git history going back to 2.6.12 or
whenever it was that git was started (admittedly fairly well-packed,
but still). The incremental for some -rc cycle can be megabytes, but
we're still talking single megabytes, not hundreds of megs.
So no, you're not pulling 500MiB every -rc cycle, unless you're doing
something stupid like using http (which will trigger a re-fetch, since
I end up repacking a couple of times a release) or always re-cloning.
So the fix is not to try to fetch just a part - that will not work.
Exactly because git is so good at packing, doing silly hacks like
"--depth=1" actually fetches MORE data than just doing one clone once
and then pulling incrementally after that. And no, you can't just get
partial trees (although you can then try to save some disk space by
checking out only partial trees - it's not worth the pain, though).
So the fix is:
- don't use http or rsync (they're fine for the initial clone, but
don't ever use it for any incrementals, and even then I'd suggest
keeping to rsync and not http)
- if you have some firewall issue that means that you can only use
http, get the firewall fixed. It's not a git issue.
no need to fix git.
When pulling from 2.6.37 to 2.6.38-rc1, it should look something like this:
remote: Counting objects: 84898, done.
remote: Compressing objects: 100% (14274/14274), done.
Receiving objects: 100% (71245/71245), 21.07 MiB | 26.53 MiB/s, done.
remote: Total 71245 (delta 59086), reused 67779 (delta 56042)
Resolving deltas: 100% (59086/59086), completed with 7395 local objects.
ie you got 21.07MiB for the whole change between 2.6.37 and 2.6.38-rc1.
(it does expand if you do it every day because then you won't be able
to delta quite as well, and the "completed with 7395 local objects"
means that the local packs will be much bigger on disk because they
will be expanded to have all the base objects, but that 21MB should be
the approximate actual network usage)
Considering that just the _diff_ between 2.6.37 and 2.6.38-rc1 is
about 42MB in size, the fact is that git is damn good at network
bandwidth.
Linus
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1
2011-01-19 5:42 ` Linus Torvalds
@ 2011-01-19 5:56 ` Linus Torvalds
2011-01-19 18:07 ` Steven Rostedt
2011-01-21 3:23 ` tag&track [Re: Linux 2.6.38-rc1] nobody
1 sibling, 1 reply; 69+ messages in thread
From: Linus Torvalds @ 2011-01-19 5:56 UTC (permalink / raw)
To: nobody; +Cc: Linux Kernel Mailing List
On Tue, Jan 18, 2011 at 9:42 PM, Linus Torvalds
<torvalds@linux-foundation.org> wrote:
>
> When pulling from 2.6.37 to 2.6.38-rc1, it should look something like this:
>
> remote: Counting objects: 84898, done.
> remote: Compressing objects: 100% (14274/14274), done.
> Receiving objects: 100% (71245/71245), 21.07 MiB | 26.53 MiB/s, done.
> remote: Total 71245 (delta 59086), reused 67779 (delta 56042)
> Resolving deltas: 100% (59086/59086), completed with 7395 local objects.
>
> ie you got 21.07MiB for the whole change between 2.6.37 and 2.6.38-rc1.
Btw, what may confuse you a bit is that the on-disk representation of
the newly received pack ends up being about 69MB, ie the 21MiB of
network traffic almost tripled in size as a result of that "resolving
deltas" thing. That's because git pack-files are designed to always be
stand-alone, so on disk, the pack-file will always contain the base
objects needed to expand all the deltas.
But on the wire, we don't do that, which is why you have that
"Resolving deltas" phase - it's a purely local phase where it takes
the "pure delta" pack that came over the wire, and creates the
well-formed pack that doesn't have any deltas that depend on external
objects.
And that expansion will end up happening every time you pull: so if
you do daily pulls, all those pulls that will have been fairly small
on the wire will all have been expanded so that the resulting packs
are stand-alone. Which means that you often end up having the same (or
very similar) base objects duplicated in the packs.
So I can well imagine that if you do a pull every day, over two weeks
your .git/objects/pack directory will have new packs that together are
500MB in size due to all of that. That's why git likes doing some GC
on its data every once in a while - it will repack all those
individual packs into one big pack, which avoids all that duplication
of base objects.
And why do we expand the packs and make them stand on their own? Why
don't we just keep all the object data as deltas agains objects in
other packs, the way we pass data around on the network? The reason is
simply robustness. You can get into various nasty situations (like
circular delta dependencies) if you allow deltas between different
packs. So the only time we allow a so-called "thin pack" (ie the pack
is full of deltas against objects external to the pack) is for the
ephemeral pack that is transferred during a "pull" or "fetch". In that
situation we end up doing lots of extra sanity checking, and because
it's ephemeral you never get into the whole situation where deltas in
different packs could refer to each other (because by the time it's a
real pack, it will have been expanded out to be self-sufficient).
So do use "git gc" every once in a while to avoid unnecessary pack
duplication issues (it also makes object indexing much faster etc).
Linus
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1 doesn't boot
2011-01-18 23:54 Linux 2.6.38-rc1 Linus Torvalds
2011-01-19 2:07 ` Linus Torvalds
@ 2011-01-19 7:39 ` Markus Trippelsdorf
2011-01-19 7:46 ` Shaohua Li
2011-01-19 7:49 ` Markus Trippelsdorf
2011-01-19 8:39 ` PPS parport boot lockup: INFO: HARDIRQ-READ-safe -> HARDIRQ-READ-unsafe lock order detected Ingo Molnar
` (2 subsequent siblings)
4 siblings, 2 replies; 69+ messages in thread
From: Markus Trippelsdorf @ 2011-01-19 7:39 UTC (permalink / raw)
To: Linus Torvalds
Cc: Linux Kernel Mailing List, Shaohua Li, Ingo Molnar, Sam Ravnborg
On 2011.01.18 at 15:54 -0800, Linus Torvalds wrote:
>
> And as usual, report any regressions to the lists and the appropriate
> authorities.
Unfortunately 2.6.38-rc1 doesn't even boot on my machine (amd64).
This is caused by 86b1e8dd83cbb0f:
x86: Make relocatable kernel work with new binutils
Reverting the commit solves the problem.
--
Markus
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1 doesn't boot
2011-01-19 7:39 ` Linux 2.6.38-rc1 doesn't boot Markus Trippelsdorf
@ 2011-01-19 7:46 ` Shaohua Li
2011-01-19 7:55 ` Markus Trippelsdorf
2011-01-19 7:49 ` Markus Trippelsdorf
1 sibling, 1 reply; 69+ messages in thread
From: Shaohua Li @ 2011-01-19 7:46 UTC (permalink / raw)
To: Markus Trippelsdorf
Cc: Linus Torvalds, Linux Kernel Mailing List, Ingo Molnar, Sam Ravnborg
On Wed, 2011-01-19 at 15:39 +0800, Markus Trippelsdorf wrote:
> On 2011.01.18 at 15:54 -0800, Linus Torvalds wrote:
> >
> > And as usual, report any regressions to the lists and the appropriate
> > authorities.
>
> Unfortunately 2.6.38-rc1 doesn't even boot on my machine (amd64).
> This is caused by 86b1e8dd83cbb0f:
> x86: Make relocatable kernel work with new binutils
>
> Reverting the commit solves the problem.
can you post your config file?
Thanks,
Shaohua
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1 doesn't boot
2011-01-19 7:39 ` Linux 2.6.38-rc1 doesn't boot Markus Trippelsdorf
2011-01-19 7:46 ` Shaohua Li
@ 2011-01-19 7:49 ` Markus Trippelsdorf
2011-01-19 8:12 ` Shaohua Li
2011-01-20 4:59 ` Linux 2.6.38-rc1 doesn't boot Alexandre Courbot
1 sibling, 2 replies; 69+ messages in thread
From: Markus Trippelsdorf @ 2011-01-19 7:49 UTC (permalink / raw)
To: Linus Torvalds
Cc: Linux Kernel Mailing List, Shaohua Li, Ingo Molnar, Sam Ravnborg
On 2011.01.19 at 08:39 +0100, Markus Trippelsdorf wrote:
> On 2011.01.18 at 15:54 -0800, Linus Torvalds wrote:
> >
> > And as usual, report any regressions to the lists and the appropriate
> > authorities.
>
> Unfortunately 2.6.38-rc1 doesn't even boot on my machine (amd64).
> This is caused by 86b1e8dd83cbb0f:
> x86: Make relocatable kernel work with new binutils
>
> Reverting the commit solves the problem.
I'm running the latest binutils:
GNU ld (Linux/GNU Binutils) 2.21.51.0.5.20110104
--
Markus
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1 doesn't boot
2011-01-19 7:46 ` Shaohua Li
@ 2011-01-19 7:55 ` Markus Trippelsdorf
0 siblings, 0 replies; 69+ messages in thread
From: Markus Trippelsdorf @ 2011-01-19 7:55 UTC (permalink / raw)
To: Shaohua Li
Cc: Linus Torvalds, Linux Kernel Mailing List, Ingo Molnar, Sam Ravnborg
On 2011.01.19 at 15:46 +0800, Shaohua Li wrote:
> On Wed, 2011-01-19 at 15:39 +0800, Markus Trippelsdorf wrote:
> > On 2011.01.18 at 15:54 -0800, Linus Torvalds wrote:
> > >
> > > And as usual, report any regressions to the lists and the appropriate
> > > authorities.
> >
> > Unfortunately 2.6.38-rc1 doesn't even boot on my machine (amd64).
> > This is caused by 86b1e8dd83cbb0f:
> > x86: Make relocatable kernel work with new binutils
> >
> > Reverting the commit solves the problem.
> can you post your config file?
Sure:
#
# Automatically generated make config: don't edit
# Linux/x86_64 2.6.37 Kernel Configuration
# Tue Jan 18 13:32:09 2011
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
# CONFIG_AUTO_IRQ_AFFINITY is not set
# CONFIG_IRQ_PER_CPU is not set
# CONFIG_HARDIRQS_SW_RESEND is not set
# CONFIG_SPARSE_IRQ is not set
#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_JUMP_LABEL=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
# CONFIG_CPU_SUP_INTEL is not set
CONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_CENTAUR is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=2
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_POWER_METER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_PROC_EVENT is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IA32_EMULATION is not set
# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
CONFIG_RPS=y
CONFIG_XPS=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE="radeon/R600_rlc.bin"
CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_ATA_ACPI is not set
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_MII=y
# CONFIG_PHYLIB is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_ATL1E=y
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_STMMAC_ETH is not set
# CONFIG_PCH_GBE is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set
#
# CAIF transport drivers
#
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_FIX_EARLYCON_MEM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_EG20T is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ20Z75 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_PKGTEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
CONFIG_SENSORS_ATK0110=y
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
# CONFIG_MFD_SUPPORT is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
CONFIG_DRM_RADEON_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=y
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_PCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
# CONFIG_HID_3M_PCT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX_FF is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CANDO is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_EGALAX is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MOSART is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_ROCCAT_KONEPLUS is not set
# CONFIG_HID_ROCCAT_PYRA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_UAS is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SAMBA is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_NFC_DEVICES is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
# CONFIG_EDAC_MCE_INJ is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_AMD64=y
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I7CORE is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_USE_FOR_EXT23 is not set
# CONFIG_EXT4_FS_XATTR is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_BKL is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_RCU_CPU_STALL_DETECTOR=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_CPU_STALL_DETECTOR_RUNNABLE=y
CONFIG_RCU_CPU_STALL_VERBOSE=y
# CONFIG_LKDTM is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=y
# CONFIG_KVM_MMU_AUDIT is not set
CONFIG_VHOST_NET=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
--
Markus
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1 doesn't boot
2011-01-19 7:49 ` Markus Trippelsdorf
@ 2011-01-19 8:12 ` Shaohua Li
2011-01-19 8:56 ` H. Peter Anvin
2011-01-20 4:59 ` Linux 2.6.38-rc1 doesn't boot Alexandre Courbot
1 sibling, 1 reply; 69+ messages in thread
From: Shaohua Li @ 2011-01-19 8:12 UTC (permalink / raw)
To: Markus Trippelsdorf, Lu, Hongjiu
Cc: Linus Torvalds, Linux Kernel Mailing List, Ingo Molnar, Sam Ravnborg
On Wed, 2011-01-19 at 15:49 +0800, Markus Trippelsdorf wrote:
> On 2011.01.19 at 08:39 +0100, Markus Trippelsdorf wrote:
> > On 2011.01.18 at 15:54 -0800, Linus Torvalds wrote:
> > >
> > > And as usual, report any regressions to the lists and the appropriate
> > > authorities.
> >
> > Unfortunately 2.6.38-rc1 doesn't even boot on my machine (amd64).
> > This is caused by 86b1e8dd83cbb0f:
> > x86: Make relocatable kernel work with new binutils
> >
> > Reverting the commit solves the problem.
>
> I'm running the latest binutils:
> GNU ld (Linux/GNU Binutils) 2.21.51.0.5.20110104
Hmm, reproduce it here with binutils-2.21.51.0.6-20110118
but not with GNU ld (GNU Binutils for Ubuntu) 2.20.51-system.20100908
I got this in system.map: ffffffff03514880 D jiffies_64, which looks
wrong.
looks binutils changed something again.
Have no idea, CC Lu Hongjiu.
Thanks,
Shaohua
^ permalink raw reply [flat|nested] 69+ messages in thread
* PPS parport boot lockup: INFO: HARDIRQ-READ-safe -> HARDIRQ-READ-unsafe lock order detected
2011-01-18 23:54 Linux 2.6.38-rc1 Linus Torvalds
2011-01-19 2:07 ` Linus Torvalds
2011-01-19 7:39 ` Linux 2.6.38-rc1 doesn't boot Markus Trippelsdorf
@ 2011-01-19 8:39 ` Ingo Molnar
2011-01-20 13:04 ` Alexander Gordeev
` (2 more replies)
2011-01-19 12:02 ` percpu related boot crash on x86 (was: Linux 2.6.38-rc1) Ingo Molnar
2011-01-19 21:40 ` Linux 2.6.38-rc1 Alan Cox
4 siblings, 3 replies; 69+ messages in thread
From: Ingo Molnar @ 2011-01-19 8:39 UTC (permalink / raw)
To: Linus Torvalds, Alexander Gordeev, Andrew Morton
Cc: Linux Kernel Mailing List, Thomas Gleixner
.38-rc1 allyes64 bootup locks up soft, but first produces this lockdep splat:
[ 73.524088] pps_ldisc: PPS line discipline registered
[ 73.529156] initcall pps_tty_init+0x0/0xa4 returned 0 after 4950 usecs
[ 73.535691] calling pps_parport_init+0x0/0x60 @ 1
[ 73.540491] pps_parport: parallel port PPS client
[ 73.545219]
[ 73.545220] ======================================================
[ 73.549198] [ INFO: HARDIRQ-READ-safe -> HARDIRQ-READ-unsafe lock order detected ]
[ 73.549198] 2.6.38-rc1-tip-01889-g7ca14ab-dirty #86514
[ 73.549198] ------------------------------------------------------
[ 73.549198] swapper/1 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[ 73.549198] (&(&tmp->waitlist_lock)->rlock){+.+...}, at: [<ffffffff818f7ef4>] parport_claim+0x1c3/0x22f
[ 73.549198]
[ 73.549198] and this task is already holding:
[ 73.549198] (&tmp->cad_lock){.-....}, at: [<ffffffff818f7d86>] parport_claim+0x55/0x22f
[ 73.549198] which would create a new lock dependency:
[ 73.549198] (&tmp->cad_lock){.-....} -> (&(&tmp->waitlist_lock)->rlock){+.+...}
[ 73.549198]
[ 73.549198] but this new dependency connects a HARDIRQ-READ-irq-safe lock:
[ 73.549198] (&tmp->cad_lock){.-....}
[ 73.549198] ... which became HARDIRQ-READ-irq-safe at:
[ 73.549198] [<ffffffff810cef78>] __lock_acquire+0x2b9/0xdcf
[ 73.549198] [<ffffffff810cffb3>] lock_acquire+0xcf/0xf9
[ 73.549198] [<ffffffff82dc602a>] _raw_read_lock+0x39/0x6e
[ 73.549198] [<ffffffff818f7d07>] parport_irq_handler+0x26/0x50
[ 73.549198] [<ffffffff81104158>] handle_IRQ_event+0x61/0x13d
[ 73.549198] [<ffffffff81106426>] handle_edge_irq+0xe3/0x12f
[ 73.549198] [<ffffffff810423b9>] handle_irq+0x88/0x90
[ 73.549198] [<ffffffff82dccbdd>] do_IRQ+0x4d/0xa5
[ 73.549198] [<ffffffff82dc6493>] ret_from_intr+0x0/0x1a
[ 73.549198] [<ffffffff81b43553>] ppa_d_pulse+0x2d/0x52
[ 73.549198] [<ffffffff81b43c04>] ppa_disconnect.clone.1+0x1a/0x43
[ 73.549198] [<ffffffff81b44115>] __ppa_attach+0x238/0x64d
[ 73.549198] [<ffffffff81b44538>] ppa_attach+0xe/0x10
[ 73.549198] [<ffffffff818f8474>] parport_register_driver+0x3e/0x86
[ 73.549198] [<ffffffff849e7a80>] ppa_driver_init+0x25/0x27
[ 73.549198] [<ffffffff810021ef>] do_one_initcall+0x57/0x13c
[ 73.549198] [<ffffffff84989e5e>] kernel_init+0x199/0x222
[ 73.549198] [<ffffffff81040b44>] kernel_thread_helper+0x4/0x10
[ 73.549198]
[ 73.549198] to a HARDIRQ-READ-irq-unsafe lock:
[ 73.549198] (&(&tmp->waitlist_lock)->rlock){+.+...}
[ 73.549198] ... which became HARDIRQ-READ-irq-unsafe at:
[ 73.549198] ... [<ffffffff810cf02a>] __lock_acquire+0x36b/0xdcf
[ 73.549198] [<ffffffff810cffb3>] lock_acquire+0xcf/0xf9
[ 73.549198] [<ffffffff82dc57c3>] _raw_spin_lock+0x36/0x69
[ 73.549198] [<ffffffff818f8916>] parport_unregister_device+0xc7/0x154
[ 73.549198] [<ffffffff818fb7a3>] parport_close+0xe/0x10
[ 73.549198] [<ffffffff818fc34f>] parport_device_id+0x713/0x728
[ 73.549198] [<ffffffff818fbb6a>] parport_daisy_init+0x3b0/0x42b
[ 73.549198] [<ffffffff818f8358>] parport_announce_port+0x16/0xf4
[ 73.549198] [<ffffffff818fdb77>] parport_pc_probe_port+0xb27/0xbaf
[ 73.549198] [<ffffffff818fdf90>] parport_pc_pnp_probe+0x17f/0x1a7
[ 73.549198] [<ffffffff817927f2>] pnp_device_probe+0x81/0xab
[ 73.549198] [<ffffffff819037bf>] driver_probe_device+0x11d/0x1e5
[ 73.549198] [<ffffffff819038d6>] __driver_attach+0x4f/0x70
[ 73.549198] [<ffffffff8190282e>] bus_for_each_dev+0x5c/0x88
[ 73.549198] [<ffffffff819033e4>] driver_attach+0x1e/0x20
[ 73.549198] [<ffffffff81902fdd>] bus_add_driver+0xc7/0x21e
[ 73.549198] [<ffffffff81903b39>] driver_register+0x9b/0x108
[ 73.549198] [<ffffffff8179256b>] pnp_register_driver+0x21/0x23
[ 73.549198] [<ffffffff849dcf49>] parport_pc_init+0x282/0x311
[ 73.549198] [<ffffffff810021ef>] do_one_initcall+0x57/0x13c
[ 73.549198] [<ffffffff84989e5e>] kernel_init+0x199/0x222
[ 73.549198] [<ffffffff81040b44>] kernel_thread_helper+0x4/0x10
[ 73.549198]
[ 73.549198] other info that might help us debug this:
[ 73.549198]
[ 73.549198] 2 locks held by swapper/1:
[ 73.549198] #0: (registration_lock){+.+.+.}, at: [<ffffffff818f8465>] parport_register_driver+0x2f/0x86
[ 73.549198] #1: (&tmp->cad_lock){.-....}, at: [<ffffffff818f7d86>] parport_claim+0x55/0x22f
[ 73.549198]
[ 73.549198] the dependencies between HARDIRQ-READ-irq-safe lock and the holding lock:
[ 73.549198] -> (&tmp->cad_lock){.-....} ops: 11 {
[ 73.549198] IN-HARDIRQ-R at:
[ 73.549198] [<ffffffff810cef78>] __lock_acquire+0x2b9/0xdcf
[ 73.549198] [<ffffffff810cffb3>] lock_acquire+0xcf/0xf9
[ 73.549198] [<ffffffff82dc602a>] _raw_read_lock+0x39/0x6e
[ 73.549198] [<ffffffff818f7d07>] parport_irq_handler+0x26/0x50
[ 73.549198] [<ffffffff81104158>] handle_IRQ_event+0x61/0x13d
[ 73.549198] [<ffffffff81106426>] handle_edge_irq+0xe3/0x12f
[ 73.549198] [<ffffffff810423b9>] handle_irq+0x88/0x90
[ 73.549198] [<ffffffff82dccbdd>] do_IRQ+0x4d/0xa5
[ 73.549198] [<ffffffff82dc6493>] ret_from_intr+0x0/0x1a
[ 73.549198] [<ffffffff81b43553>] ppa_d_pulse+0x2d/0x52
[ 73.549198] [<ffffffff81b43c04>] ppa_disconnect.clone.1+0x1a/0x43
[ 73.549198] [<ffffffff81b44115>] __ppa_attach+0x238/0x64d
[ 73.549198] [<ffffffff81b44538>] ppa_attach+0xe/0x10
[ 73.549198] [<ffffffff818f8474>] parport_register_driver+0x3e/0x86
[ 73.549198] [<ffffffff849e7a80>] ppa_driver_init+0x25/0x27
[ 73.549198] [<ffffffff810021ef>] do_one_initcall+0x57/0x13c
[ 73.549198] [<ffffffff84989e5e>] kernel_init+0x199/0x222
[ 73.549198] [<ffffffff81040b44>] kernel_thread_helper+0x4/0x10
[ 73.549198] INITIAL USE at:
[ 73.549198] [<ffffffff810cf0ab>] __lock_acquire+0x3ec/0xdcf
[ 73.549198] [<ffffffff810cffb3>] lock_acquire+0xcf/0xf9
[ 73.549198] [<ffffffff82dc5ca0>] _raw_write_lock_irqsave+0x45/0x7f
[ 73.549198] [<ffffffff818f7d86>] parport_claim+0x55/0x22f
[ 73.549198] [<ffffffff818f80ed>] parport_claim_or_block+0x21/0x6a
[ 73.549198] [<ffffffff818fbc83>] parport_device_id+0x47/0x728
[ 73.549198] [<ffffffff818fbb6a>] parport_daisy_init+0x3b0/0x42b
[ 73.549198] [<ffffffff818f8358>] parport_announce_port+0x16/0xf4
[ 73.549198] [<ffffffff818fdb77>] parport_pc_probe_port+0xb27/0xbaf
[ 73.549198] [<ffffffff818fdf90>] parport_pc_pnp_probe+0x17f/0x1a7
[ 73.549198] [<ffffffff817927f2>] pnp_device_probe+0x81/0xab
[ 73.549198] [<ffffffff819037bf>] driver_probe_device+0x11d/0x1e5
[ 73.549198] [<ffffffff819038d6>] __driver_attach+0x4f/0x70
[ 73.549198] [<ffffffff8190282e>] bus_for_each_dev+0x5c/0x88
[ 73.549198] [<ffffffff819033e4>] driver_attach+0x1e/0x20
[ 73.549198] [<ffffffff81902fdd>] bus_add_driver+0xc7/0x21e
[ 73.549198] [<ffffffff81903b39>] driver_register+0x9b/0x108
[ 73.549198] [<ffffffff8179256b>] pnp_register_driver+0x21/0x23
[ 73.549198] [<ffffffff849dcf49>] parport_pc_init+0x282/0x311
[ 73.549198] [<ffffffff810021ef>] do_one_initcall+0x57/0x13c
[ 73.549198] [<ffffffff84989e5e>] kernel_init+0x199/0x222
[ 73.549198] [<ffffffff81040b44>] kernel_thread_helper+0x4/0x10
[ 73.549198] }
[ 73.549198] ... key at: [<ffffffff85a1eed8>] __key.21525+0x0/0x8
[ 73.549198] ... acquired at:
[ 73.549198] [<ffffffff810cd0f8>] check_irq_usage+0x78/0x89
[ 73.549198] [<ffffffff810cf79c>] __lock_acquire+0xadd/0xdcf
[ 73.549198] [<ffffffff810cffb3>] lock_acquire+0xcf/0xf9
[ 73.549198] [<ffffffff82dc57c3>] _raw_spin_lock+0x36/0x69
[ 73.549198] [<ffffffff818f7ef4>] parport_claim+0x1c3/0x22f
[ 73.549198] [<ffffffff818f80ed>] parport_claim_or_block+0x21/0x6a
[ 73.549198] [<ffffffff824b8857>] parport_attach+0xd4/0x173
[ 73.549198] [<ffffffff818f8474>] parport_register_driver+0x3e/0x86
[ 73.549198] [<ffffffff84a06125>] pps_parport_init+0x46/0x60
[ 73.549198] [<ffffffff810021ef>] do_one_initcall+0x57/0x13c
[ 73.549198] [<ffffffff84989e5e>] kernel_init+0x199/0x222
[ 73.549198] [<ffffffff81040b44>] kernel_thread_helper+0x4/0x10
[ 73.549198]
[ 73.549198]
[ 73.549198] the dependencies between the lock to be acquired and HARDIRQ-READ-irq-unsafe lock:
[ 73.549198] -> (&(&tmp->waitlist_lock)->rlock){+.+...} ops: 5 {
[ 73.549198] HARDIRQ-ON-W at:
[ 73.549198] [<ffffffff810cf02a>] __lock_acquire+0x36b/0xdcf
[ 73.549198] [<ffffffff810cffb3>] lock_acquire+0xcf/0xf9
[ 73.549198] [<ffffffff82dc57c3>] _raw_spin_lock+0x36/0x69
[ 73.549198] [<ffffffff818f8916>] parport_unregister_device+0xc7/0x154
[ 73.549198] [<ffffffff818fb7a3>] parport_close+0xe/0x10
[ 73.549198] [<ffffffff818fc34f>] parport_device_id+0x713/0x728
[ 73.549198] [<ffffffff818fbb6a>] parport_daisy_init+0x3b0/0x42b
[ 73.549198] [<ffffffff818f8358>] parport_announce_port+0x16/0xf4
[ 73.549198] [<ffffffff818fdb77>] parport_pc_probe_port+0xb27/0xbaf
[ 73.549198] [<ffffffff818fdf90>] parport_pc_pnp_probe+0x17f/0x1a7
[ 73.549198] [<ffffffff817927f2>] pnp_device_probe+0x81/0xab
[ 73.549198] [<ffffffff819037bf>] driver_probe_device+0x11d/0x1e5
[ 73.549198] [<ffffffff819038d6>] __driver_attach+0x4f/0x70
[ 73.549198] [<ffffffff8190282e>] bus_for_each_dev+0x5c/0x88
[ 73.549198] [<ffffffff819033e4>] driver_attach+0x1e/0x20
[ 73.549198] [<ffffffff81902fdd>] bus_add_driver+0xc7/0x21e
[ 73.549198] [<ffffffff81903b39>] driver_register+0x9b/0x108
[ 73.549198] [<ffffffff8179256b>] pnp_register_driver+0x21/0x23
[ 73.549198] [<ffffffff849dcf49>] parport_pc_init+0x282/0x311
[ 73.549198] [<ffffffff810021ef>] do_one_initcall+0x57/0x13c
[ 73.549198] [<ffffffff84989e5e>] kernel_init+0x199/0x222
[ 73.549198] [<ffffffff81040b44>] kernel_thread_helper+0x4/0x10
[ 73.549198] SOFTIRQ-ON-W at:
[ 73.549198] [<ffffffff810cf04e>] __lock_acquire+0x38f/0xdcf
[ 73.549198] [<ffffffff810cffb3>] lock_acquire+0xcf/0xf9
[ 73.549198] [<ffffffff82dc57c3>] _raw_spin_lock+0x36/0x69
[ 73.549198] [<ffffffff818f8916>] parport_unregister_device+0xc7/0x154
[ 73.549198] [<ffffffff818fb7a3>] parport_close+0xe/0x10
[ 73.549198] [<ffffffff818fc34f>] parport_device_id+0x713/0x728
[ 73.549198] [<ffffffff818fbb6a>] parport_daisy_init+0x3b0/0x42b
[ 73.549198] [<ffffffff818f8358>] parport_announce_port+0x16/0xf4
[ 73.549198] [<ffffffff818fdb77>] parport_pc_probe_port+0xb27/0xbaf
[ 73.549198] [<ffffffff818fdf90>] parport_pc_pnp_probe+0x17f/0x1a7
[ 73.549198] [<ffffffff817927f2>] pnp_device_probe+0x81/0xab
[ 73.549198] [<ffffffff819037bf>] driver_probe_device+0x11d/0x1e5
[ 73.549198] [<ffffffff819038d6>] __driver_attach+0x4f/0x70
[ 73.549198] [<ffffffff8190282e>] bus_for_each_dev+0x5c/0x88
[ 73.549198] [<ffffffff819033e4>] driver_attach+0x1e/0x20
[ 73.549198] [<ffffffff81902fdd>] bus_add_driver+0xc7/0x21e
[ 73.549198] [<ffffffff81903b39>] driver_register+0x9b/0x108
[ 73.549198] [<ffffffff8179256b>] pnp_register_driver+0x21/0x23
[ 73.549198] [<ffffffff849dcf49>] parport_pc_init+0x282/0x311
[ 73.549198] [<ffffffff810021ef>] do_one_initcall+0x57/0x13c
[ 73.549198] [<ffffffff84989e5e>] kernel_init+0x199/0x222
[ 73.549198] [<ffffffff81040b44>] kernel_thread_helper+0x4/0x10
[ 73.549198] INITIAL USE at:
[ 73.549198] [<ffffffff810cf0ab>] __lock_acquire+0x3ec/0xdcf
[ 73.549198] [<ffffffff810cffb3>] lock_acquire+0xcf/0xf9
[ 73.549198] [<ffffffff82dc57c3>] _raw_spin_lock+0x36/0x69
[ 73.549198] [<ffffffff818f8916>] parport_unregister_device+0xc7/0x154
[ 73.549198] [<ffffffff818fb7a3>] parport_close+0xe/0x10
[ 73.549198] [<ffffffff818fc34f>] parport_device_id+0x713/0x728
[ 73.549198] [<ffffffff818fbb6a>] parport_daisy_init+0x3b0/0x42b
[ 73.549198] [<ffffffff818f8358>] parport_announce_port+0x16/0xf4
[ 73.549198] [<ffffffff818fdb77>] parport_pc_probe_port+0xb27/0xbaf
[ 73.549198] [<ffffffff818fdf90>] parport_pc_pnp_probe+0x17f/0x1a7
[ 73.549198] [<ffffffff817927f2>] pnp_device_probe+0x81/0xab
[ 73.549198] [<ffffffff819037bf>] driver_probe_device+0x11d/0x1e5
[ 73.549198] [<ffffffff819038d6>] __driver_attach+0x4f/0x70
[ 73.549198] [<ffffffff8190282e>] bus_for_each_dev+0x5c/0x88
[ 73.549198] [<ffffffff819033e4>] driver_attach+0x1e/0x20
[ 73.549198] [<ffffffff81902fdd>] bus_add_driver+0xc7/0x21e
[ 73.549198] [<ffffffff81903b39>] driver_register+0x9b/0x108
[ 73.549198] [<ffffffff8179256b>] pnp_register_driver+0x21/0x23
[ 73.549198] [<ffffffff849dcf49>] parport_pc_init+0x282/0x311
[ 73.549198] [<ffffffff810021ef>] do_one_initcall+0x57/0x13c
[ 73.549198] [<ffffffff84989e5e>] kernel_init+0x199/0x222
[ 73.549198] [<ffffffff81040b44>] kernel_thread_helper+0x4/0x10
[ 73.549198] }
[ 73.549198] ... key at: [<ffffffff85a1eed0>] __key.21526+0x0/0x8
[ 73.549198] ... acquired at:
[ 73.549198] [<ffffffff810cd0f8>] check_irq_usage+0x78/0x89
[ 73.549198] [<ffffffff810cf79c>] __lock_acquire+0xadd/0xdcf
[ 73.549198] [<ffffffff810cffb3>] lock_acquire+0xcf/0xf9
[ 73.549198] [<ffffffff82dc57c3>] _raw_spin_lock+0x36/0x69
[ 73.549198] [<ffffffff818f7ef4>] parport_claim+0x1c3/0x22f
[ 73.549198] [<ffffffff818f80ed>] parport_claim_or_block+0x21/0x6a
[ 73.549198] [<ffffffff824b8857>] parport_attach+0xd4/0x173
[ 73.549198] [<ffffffff818f8474>] parport_register_driver+0x3e/0x86
[ 73.549198] [<ffffffff84a06125>] pps_parport_init+0x46/0x60
[ 73.549198] [<ffffffff810021ef>] do_one_initcall+0x57/0x13c
[ 73.549198] [<ffffffff84989e5e>] kernel_init+0x199/0x222
[ 73.549198] [<ffffffff81040b44>] kernel_thread_helper+0x4/0x10
[ 73.549198]
[ 73.549198]
[ 73.549198] stack backtrace:
[ 73.549198] Pid: 1, comm: swapper Not tainted 2.6.38-rc1-tip-01889-g7ca14ab-dirty #86514
[ 73.549198] Call Trace:
[ 73.549198] [<ffffffff810cd06b>] ? check_usage+0x337/0x34c
[ 73.549198] [<ffffffff84a06000>] ? pps_ktimer_init+0x63/0x9e
[ 73.549198] [<ffffffff810c0ec0>] ? local_clock+0x36/0x4d
[ 73.549198] [<ffffffff810cd0f8>] ? check_irq_usage+0x78/0x89
[ 73.549198] [<ffffffff810cf79c>] ? __lock_acquire+0xadd/0xdcf
[ 73.549198] [<ffffffff818f7ef4>] ? parport_claim+0x1c3/0x22f
[ 73.549198] [<ffffffff810cffb3>] ? lock_acquire+0xcf/0xf9
[ 73.549198] [<ffffffff818f7ef4>] ? parport_claim+0x1c3/0x22f
[ 73.549198] [<ffffffff82dc57c3>] ? _raw_spin_lock+0x36/0x69
[ 73.549198] [<ffffffff818f7ef4>] ? parport_claim+0x1c3/0x22f
[ 73.549198] [<ffffffff818f7ef4>] ? parport_claim+0x1c3/0x22f
[ 73.549198] [<ffffffff818f80ed>] ? parport_claim_or_block+0x21/0x6a
[ 73.549198] [<ffffffff824b8857>] ? parport_attach+0xd4/0x173
[ 73.549198] [<ffffffff824b8ab5>] ? pps_echo+0x0/0x47
[ 73.549198] [<ffffffff818f8474>] ? parport_register_driver+0x3e/0x86
[ 73.549198] [<ffffffff84a060df>] ? pps_parport_init+0x0/0x60
[ 73.549198] [<ffffffff84a06125>] ? pps_parport_init+0x46/0x60
[ 73.549198] [<ffffffff84a060df>] ? pps_parport_init+0x0/0x60
[ 73.549198] [<ffffffff810021ef>] ? do_one_initcall+0x57/0x13c
[ 73.549198] [<ffffffff84989e5e>] ? kernel_init+0x199/0x222
[ 73.549198] [<ffffffff81040b44>] ? kernel_thread_helper+0x4/0x10
[ 73.549198] [<ffffffff82dc6554>] ? restore_args+0x0/0x30
[ 73.549198] [<ffffffff84989cc5>] ? kernel_init+0x0/0x222
[ 73.549198] [<ffffffff81040b40>] ? kernel_thread_helper+0x0/0x10
[ 75.227429] pps pps0: PPS event at 4294911102
[ 75.231795] pps pps0: PPS event at 1295471376.227427654
[ 75.237028] pps pps0: capture assert seq #1
[ 76.240020] pps pps0: PPS event at 4294911356
[ 76.244380] pps pps0: PPS event at 1295471377.240018362
[ 76.249608] pps pps0: capture assert seq #2
[ 77.252019] pps pps0: PPS event at 4294911609
[ 77.256379] pps pps0: PPS event at 1295471378.252017372
[ 77.261604] pps pps0: capture assert seq #3
[ 78.264021] pps pps0: PPS event at 4294911862
[ 78.268387] pps pps0: PPS event at 1295471379.264018619
[ 78.273621] pps pps0: capture assert seq #4
[ 79.276018] pps pps0: PPS event at 4294912115
[ 79.280384] pps pps0: PPS event at 1295471380.276016791
[ 79.285619] pps pps0: capture assert seq #5
[ 80.288020] pps pps0: PPS event at 4294912368
[ 80.292382] pps pps0: PPS event at 1295471381.288018317
[ 80.297608] pps pps0: capture assert seq #6
[ 81.300023] pps pps0: PPS event at 4294912621
[ 81.304390] pps pps0: PPS event at 1295471382.300021518
That's probably one of these commits:
563558b2c735: pps: add parallel port PPS signal generator
46b402a0e5e4: pps: add parallel port PPS signal generator
a10203c691ea: pps: add parallel port PPS client
Plus CONFIG_PPS_CLIENT_PARPORT=y.
This feature seems rather untested - this is a plain whitebox PC with a parallel
port.
Btw., why does 46b402a0e5e4 and 563558b2c735 have the same title?
Thanks,
Ingo
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1 doesn't boot
2011-01-19 8:12 ` Shaohua Li
@ 2011-01-19 8:56 ` H. Peter Anvin
2011-01-19 9:09 ` Ingo Molnar
2011-01-19 9:33 ` [tip:x86/urgent] Revert "x86: Make relocatable kernel work with new binutils" tip-bot for Ingo Molnar
0 siblings, 2 replies; 69+ messages in thread
From: H. Peter Anvin @ 2011-01-19 8:56 UTC (permalink / raw)
To: Shaohua Li
Cc: Markus Trippelsdorf, Lu, Hongjiu, Linus Torvalds,
Linux Kernel Mailing List, Ingo Molnar, Sam Ravnborg
[-- Attachment #1: Type: text/plain, Size: 1499 bytes --]
On 01/19/2011 12:12 AM, Shaohua Li wrote:
> On Wed, 2011-01-19 at 15:49 +0800, Markus Trippelsdorf wrote:
>> On 2011.01.19 at 08:39 +0100, Markus Trippelsdorf wrote:
>>> On 2011.01.18 at 15:54 -0800, Linus Torvalds wrote:
>>>>
>>>> And as usual, report any regressions to the lists and the appropriate
>>>> authorities.
>>>
>>> Unfortunately 2.6.38-rc1 doesn't even boot on my machine (amd64).
>>> This is caused by 86b1e8dd83cbb0f:
>>> x86: Make relocatable kernel work with new binutils
>>>
>>> Reverting the commit solves the problem.
>>
>> I'm running the latest binutils:
>> GNU ld (Linux/GNU Binutils) 2.21.51.0.5.20110104
> Hmm, reproduce it here with binutils-2.21.51.0.6-20110118
> but not with GNU ld (GNU Binutils for Ubuntu) 2.20.51-system.20100908
> I got this in system.map: ffffffff03514880 D jiffies_64, which looks
> wrong.
> looks binutils changed something again.
> Have no idea, CC Lu Hongjiu.
>
Either way... the whole jiffies vs jiffies_64 thing is kind of
ridiculous. We should be able to do it in a completely
architecture-generic way by either making it a union(!) (with "jiffies"
and "jiffies_64" presumably would be #defines, or we do a global replace
across the tree), moving the variable declaration itself to a .S file
(which would only have data components and therefore would be
arch-generic) or doing something like the attached (untested since it is
1 am here) patch.
This should let us get rid of the hacks in *all* the architectures, not
just x86.
-hpa
[-- Attachment #2: diff --]
[-- Type: text/plain, Size: 586 bytes --]
diff --git a/kernel/timer.c b/kernel/timer.c
index 43ca993..cb4db47 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -41,6 +41,7 @@
#include <linux/sched.h>
#include <linux/slab.h>
+#include <asm/byteorder.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
#include <asm/div64.h>
@@ -54,6 +55,12 @@ u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES;
EXPORT_SYMBOL(jiffies_64);
+#if defined(__LITTLE_ENDIAN) || (BITS_PER_LONG >= 64)
+asm("jiffies = jiffies_64");
+#else
+asm("jiffies = jiffies_64 + 4");
+#endif
+
/*
* per-CPU timer vector definitions:
*/
^ permalink raw reply related [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1 doesn't boot
2011-01-19 8:56 ` H. Peter Anvin
@ 2011-01-19 9:09 ` Ingo Molnar
2011-01-20 2:08 ` Shaohua Li
2011-01-19 9:33 ` [tip:x86/urgent] Revert "x86: Make relocatable kernel work with new binutils" tip-bot for Ingo Molnar
1 sibling, 1 reply; 69+ messages in thread
From: Ingo Molnar @ 2011-01-19 9:09 UTC (permalink / raw)
To: H. Peter Anvin
Cc: Shaohua Li, Markus Trippelsdorf, Lu, Hongjiu, Linus Torvalds,
Linux Kernel Mailing List, Sam Ravnborg
* H. Peter Anvin <h.peter.anvin@intel.com> wrote:
> On 01/19/2011 12:12 AM, Shaohua Li wrote:
> > On Wed, 2011-01-19 at 15:49 +0800, Markus Trippelsdorf wrote:
> >> On 2011.01.19 at 08:39 +0100, Markus Trippelsdorf wrote:
> >>> On 2011.01.18 at 15:54 -0800, Linus Torvalds wrote:
> >>>>
> >>>> And as usual, report any regressions to the lists and the appropriate
> >>>> authorities.
> >>>
> >>> Unfortunately 2.6.38-rc1 doesn't even boot on my machine (amd64).
> >>> This is caused by 86b1e8dd83cbb0f:
> >>> x86: Make relocatable kernel work with new binutils
> >>>
> >>> Reverting the commit solves the problem.
> >>
> >> I'm running the latest binutils:
> >> GNU ld (Linux/GNU Binutils) 2.21.51.0.5.20110104
> > Hmm, reproduce it here with binutils-2.21.51.0.6-20110118
> > but not with GNU ld (GNU Binutils for Ubuntu) 2.20.51-system.20100908
> > I got this in system.map: ffffffff03514880 D jiffies_64, which looks
> > wrong.
> > looks binutils changed something again.
> > Have no idea, CC Lu Hongjiu.
> >
>
> Either way... the whole jiffies vs jiffies_64 thing is kind of
> ridiculous. We should be able to do it in a completely
> architecture-generic way by either making it a union(!) (with "jiffies"
> and "jiffies_64" presumably would be #defines, or we do a global replace
> across the tree), moving the variable declaration itself to a .S file
> (which would only have data components and therefore would be
> arch-generic) or doing something like the attached (untested since it is
> 1 am here) patch.
>
> This should let us get rid of the hacks in *all* the architectures, not
> just x86.
Ok - until it's resolved i'll queue up a revert - a known build failure is preferred
to a boot regression.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 69+ messages in thread
* [tip:x86/urgent] Revert "x86: Make relocatable kernel work with new binutils"
2011-01-19 8:56 ` H. Peter Anvin
2011-01-19 9:09 ` Ingo Molnar
@ 2011-01-19 9:33 ` tip-bot for Ingo Molnar
1 sibling, 0 replies; 69+ messages in thread
From: tip-bot for Ingo Molnar @ 2011-01-19 9:33 UTC (permalink / raw)
To: linux-tip-commits
Cc: linux-kernel, hpa, mingo, sam, hongjiu.lu, shaohua.li, markus,
tglx, mingo
Commit-ID: 6b35eb9ddcddde7b510726de03fae071178f1ec4
Gitweb: http://git.kernel.org/tip/6b35eb9ddcddde7b510726de03fae071178f1ec4
Author: Ingo Molnar <mingo@elte.hu>
AuthorDate: Wed, 19 Jan 2011 10:09:42 +0100
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Wed, 19 Jan 2011 10:09:42 +0100
Revert "x86: Make relocatable kernel work with new binutils"
This reverts commit 86b1e8dd83cb ("x86: Make relocatable kernel work with
new binutils").
Markus Trippelsdorf reported a boot failure caused by this patch.
The real solution to the original patch will likely involve an
arch-generic solution to define an overlaid jiffies_64 and jiffies
variables.
Until that's done and tested on all architectures revert this commit to
solve the regression.
Reported-and-bisected-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: "Lu, Hongjiu" <hongjiu.lu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <4D36A759.60704@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/kernel/vmlinux.lds.S | 11 ++---------
1 files changed, 2 insertions(+), 9 deletions(-)
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index b34ab80..bf47007 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -34,9 +34,11 @@ OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
#ifdef CONFIG_X86_32
OUTPUT_ARCH(i386)
ENTRY(phys_startup_32)
+jiffies = jiffies_64;
#else
OUTPUT_ARCH(i386:x86-64)
ENTRY(phys_startup_64)
+jiffies_64 = jiffies;
#endif
#if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA)
@@ -140,15 +142,6 @@ SECTIONS
CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
DATA_DATA
- /*
- * Workaround a binutils (2.20.51.0.12 to 2.21.51.0.3) bug.
- * This makes jiffies relocatable in such binutils
- */
-#ifdef CONFIG_X86_32
- jiffies = jiffies_64;
-#else
- jiffies_64 = jiffies;
-#endif
CONSTRUCTORS
/* rarely changed data like cpu maps */
^ permalink raw reply related [flat|nested] 69+ messages in thread
* percpu related boot crash on x86 (was: Linux 2.6.38-rc1)
2011-01-18 23:54 Linux 2.6.38-rc1 Linus Torvalds
` (2 preceding siblings ...)
2011-01-19 8:39 ` PPS parport boot lockup: INFO: HARDIRQ-READ-safe -> HARDIRQ-READ-unsafe lock order detected Ingo Molnar
@ 2011-01-19 12:02 ` Ingo Molnar
2011-01-19 12:44 ` Tejun Heo
` (2 more replies)
2011-01-19 21:40 ` Linux 2.6.38-rc1 Alan Cox
4 siblings, 3 replies; 69+ messages in thread
From: Ingo Molnar @ 2011-01-19 12:02 UTC (permalink / raw)
To: Linus Torvalds, Tejun Heo
Cc: Linux Kernel Mailing List, Thomas Gleixner, H. Peter Anvin,
Peter Zijlstra, Andrew Morton, Pekka Enberg
[-- Attachment #1: Type: text/plain, Size: 4844 bytes --]
There's a rather frequent, percpu related boot crash that I can see with .38-rc1:
[ 0.000000] NR_IRQS:4352
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at kernel/smp.c:433 smp_call_function_many+0x90/0x209()
[ 0.000000] Hardware name: System Product Name
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.38-rc1 #86551
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff8103f544>] ? warn_slowpath_common+0x85/0x9d
[ 0.000000] [<ffffffff81027218>] ? do_flush_tlb_all+0x0/0x4d
[ 0.000000] [<ffffffff81027218>] ? do_flush_tlb_all+0x0/0x4d
[ 0.000000] [<ffffffff8103f576>] ? warn_slowpath_null+0x1a/0x1c
[ 0.000000] [<ffffffff810760df>] ? smp_call_function_many+0x90/0x209
[ 0.000000] [<ffffffff810cc7ca>] ? pcpu_mem_alloc+0x65/0x67
[ 0.000000] [<ffffffff81027218>] ? do_flush_tlb_all+0x0/0x4d
[ 0.000000] [<ffffffff8107627a>] ? smp_call_function+0x22/0x26
[ 0.000000] [<ffffffff81076299>] ? on_each_cpu+0x1b/0x39
[ 0.000000] [<ffffffff810274e6>] ? flush_tlb_all+0x1c/0x1e
[ 0.000000] [<ffffffff810dc7d7>] ? remove_vm_area+0x71/0x96
[ 0.000000] [<ffffffff810dc868>] ? __vunmap+0x3f/0xcf
[ 0.000000] [<ffffffff810dc9db>] ? vfree+0x2c/0x2e
[ 0.000000] [<ffffffff810ccca6>] ? pcpu_mem_free+0x1e/0x20
[ 0.000000] [<ffffffff810ccd75>] ? pcpu_extend_area_map+0x9a/0xb6
[ 0.000000] [<ffffffff810cd452>] ? pcpu_alloc+0x17e/0x916
[ 0.000000] [<ffffffff8106bb00>] ? trace_hardirqs_off+0xd/0xf
[ 0.000000] [<ffffffff810e5bed>] ? kmem_cache_alloc_trace+0xab/0x120
[ 0.000000] [<ffffffff810cdbfa>] ? __alloc_percpu+0x10/0x12
[ 0.000000] [<ffffffff8180afd4>] ? early_irq_init+0xb2/0x13d
[ 0.000000] [<ffffffff817f4a06>] ? start_kernel+0x1fa/0x3a4
[ 0.000000] [<ffffffff817f42a6>] ? x86_64_start_reservations+0xb6/0xba
[ 0.000000] [<ffffffff817f43a1>] ? x86_64_start_kernel+0xf7/0xfe
[ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.000000] ------------[ cut here ]------------
followed shortly later by a nasty #GPF crash:
[ 0.000000] general protection fault: 01bb [#1] SMP DEBUG_PAGEALLOC
[ 0.000000] last sysfs file:
[ 0.000000] CPU 0
[ 0.000000] Modules linked in:
[ 0.000000]
[ 0.000000] Pid: 0, comm: swapper Tainted: G W 2.6.38-rc1 #86551 A8N-E/System Product Name
[ 0.000000] RIP: 0010:[<ffffffff8138fb5c>] [<ffffffff8138fb5c>] _raw_spin_unlock_irqrestore+0x41/0x46
[ 0.000000] RSP: 0000:ffffffff81601ec8 EFLAGS: 00010246
[ 0.000000] RAX: 0000000000000000 RBX: 0000000000000246 RCX: 0000000000000000
[ 0.000000] RDX: 0000000000010000 RSI: 0000000000000001 RDI: ffffffff8138fb5a
[ 0.000000] RBP: ffffffff81601ed8 R08: ffffffffffffffff R09: 0000000000000001
[ 0.000000] R10: ffffffff81601e78 R11: 0000000000000000 R12: ffffffff81762690
[ 0.000000] R13: ffffffff8153b5ce R14: ffffffffffffffff R15: 0000000000000000
[ 0.000000] FS: 0000000000000000(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
[ 0.000000] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 0.000000] CR2: 0000000000f06f53 CR3: 0000000001757000 CR4: 00000000000006b0
[ 0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 0.000000] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 0.000000] Process swapper (pid: 0, threadinfo ffffffff81600000, task ffffffff8175f020)
[ 0.000000] Stack:
[ 0.000000] 0000000000000000 0000000000000246 ffffffff81601ef8 ffffffff810068a4
[ 0.000000] 0000000000000000 ffffffff817626d0 ffffffff81601f28 ffffffff817f7d71
[ 0.000000] 0000000000001100 ffffffff81828760 ffffffff8182a2c0 ffff88003ffdc380
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff810068a4>] init_8259A+0xe3/0xe8
[ 0.000000] [<ffffffff817f7d71>] init_ISA_irqs+0x2f/0x5a
[ 0.000000] [<ffffffff817f7de1>] native_init_IRQ+0xe/0xa2
[ 0.000000] [<ffffffff817f7dd1>] init_IRQ+0x35/0x37
[ 0.000000] [<ffffffff817f4a0b>] start_kernel+0x1ff/0x3a4
[ 0.000000] [<ffffffff817f42a6>] x86_64_start_reservations+0xb6/0xba
[ 0.000000] [<ffffffff817f43a1>] x86_64_start_kernel+0xf7/0xfe
[ 0.000000] Code: 18 48 89 f3 be 01 00 00 00 e8 33 fe cd ff 4c 89 e7 e8 77 1f e2 ff f6 c7 02 75 09 53 9d e8 a0 bf cd ff eb 07 e8 74 08 ce ff 53 9d <5b> 41 5c c9 c3 55 48 89 e5 53 48 83 ec 08 e8 91 2c c7 ff 48 8b
[ 0.000000] RIP [<ffffffff8138fb5c>] _raw_spin_unlock_irqrestore+0x41/0x46
Full bootlog and config attached.
One thing I've noticed is that CONFIG_MAXSMP=y, so it's pushing our various data
structure limits. The crash signature itself seems to implicate NR_IRQS related data
structures.
I'm quite certain that this is not related to x86 or irq changes in .38-1 - those
were tested on this box rather well and this crash never triggered.
Thanks,
Ingo
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 79219 bytes --]
#
# Automatically generated make config: don't edit
# Linux/x86_64 2.6.38-rc1 Kernel Configuration
# Wed Jan 19 14:10:20 2011
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_TASK_XACCT is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
# CONFIG_AUTO_IRQ_AFFINITY is not set
# CONFIG_IRQ_PER_CPU is not set
# CONFIG_HARDIRQS_SW_RESEND is not set
# CONFIG_SPARSE_IRQ is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_RCU_FAST_NO_HZ=y
CONFIG_TREE_RCU_TRACE=y
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_BLK_CGROUP=m
CONFIG_DEBUG_BLK_CGROUP=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=m
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
# CONFIG_KVM_CLOCK is not set
# CONFIG_KVM_GUEST is not set
# CONFIG_PARAVIRT is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=4096
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_I8K=m
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_EFI=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_VERBOSE=y
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_RUNTIME=y
CONFIG_PM_OPS=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_POWER_METER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
# CONFIG_ACPI_BUTTON is not set
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
# CONFIG_ACPI_PROCESSOR is not set
CONFIG_ACPI_IPMI=m
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_DEBUG_FUNC_TRACE=y
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_SBS=m
# CONFIG_ACPI_HED is not set
CONFIG_ACPI_APEI=y
# CONFIG_ACPI_APEI_GHES is not set
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_DEBUG=y
CONFIG_PCI_STUB=m
# CONFIG_HT_IRQ is not set
CONFIG_PCI_IOV=y
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=m
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
# CONFIG_IP_PIMSM_V2 is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
CONFIG_INET6_TUNNEL=m
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
CONFIG_INET6_XFRM_MODE_TUNNEL=m
# CONFIG_INET6_XFRM_MODE_BEET is not set
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_IPV6_MROUTE=y
# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_IPTABLES is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV6 is not set
CONFIG_IP6_NF_IPTABLES=m
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
# CONFIG_IP6_NF_MANGLE is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_NET_SCTPPROBE is not set
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_RDS is not set
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
# CONFIG_ATM_LANE is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_GARP=m
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
CONFIG_IEEE802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=m
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_ATM=m
# CONFIG_NET_SCH_PRIO is not set
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
# CONFIG_NET_SCH_SFQ is not set
CONFIG_NET_SCH_TEQL=m
# CONFIG_NET_SCH_TBF is not set
CONFIG_NET_SCH_GRED=m
# CONFIG_NET_SCH_DSMARK is not set
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
# CONFIG_NET_CLS_TCINDEX is not set
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=m
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_NAT=m
# CONFIG_NET_ACT_PEDIT is not set
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set
CONFIG_RPS=y
CONFIG_XPS=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NET_TCPPROBE=m
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
# CONFIG_BT_RFCOMM is not set
# CONFIG_BT_BNEP is not set
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
# CONFIG_BT_HCIUART_H4 is not set
# CONFIG_BT_HCIUART_BCSP is not set
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
# CONFIG_BT_MRVL_SDIO is not set
CONFIG_BT_ATH3K=m
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
CONFIG_CEPH_LIB_PRETTYDEBUG=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_CPQ_DA=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_TIFM_CORE=m
CONFIG_IWMC3200TOP=m
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
# CONFIG_SCSI_DH_HP_SW is not set
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_SATA_INIC162X=m
# CONFIG_SATA_ACARD_AHCI is not set
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=m
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
CONFIG_SATA_ULI=m
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
CONFIG_PATA_CS5536=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
CONFIG_PATA_SC1200=m
# CONFIG_PATA_SCH is not set
CONFIG_PATA_SERVERWORKS=m
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=m
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=m
CONFIG_PATA_LEGACY=m
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_TARGET_CORE=m
# CONFIG_TCM_IBLOCK is not set
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
# CONFIG_FIREWIRE_SBP2 is not set
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
# CONFIG_VETH is not set
CONFIG_NET_SB1000=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
# CONFIG_ARCNET_COM90xx is not set
CONFIG_ARCNET_COM90xxIO=m
# CONFIG_ARCNET_RIM_I is not set
CONFIG_ARCNET_COM20020=m
# CONFIG_ARCNET_COM20020_PCI is not set
CONFIG_MII=y
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
CONFIG_VITESSE_PHY=m
# CONFIG_SMSC_PHY is not set
CONFIG_BROADCOM_PHY=m
CONFIG_BCM63XX_PHY=m
CONFIG_ICPLUS_PHY=m
# CONFIG_REALTEK_PHY is not set
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MICREL_PHY=m
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_HAPPYMEAL=m
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
CONFIG_AMD8111_ETH=m
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
CONFIG_E100=y
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
CONFIG_EPIC100=m
# CONFIG_SMSC9420 is not set
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_DL2K=m
# CONFIG_E1000 is not set
CONFIG_E1000E=y
CONFIG_IP1000=m
CONFIG_IGB=m
# CONFIG_IGB_DCA is not set
CONFIG_IGBVF=m
CONFIG_NS83820=m
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=y
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_QLA3XXX=m
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_STMMAC_ETH=m
CONFIG_STMMAC_DA=y
CONFIG_STMMAC_DUAL_MAC=y
# CONFIG_PCH_GBE is not set
CONFIG_NETDEV_10000=y
CONFIG_MDIO=m
CONFIG_CHELSIO_T1=m
# CONFIG_CHELSIO_T1_1G is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
CONFIG_CHELSIO_T4_DEPENDS=y
# CONFIG_CHELSIO_T4 is not set
CONFIG_CHELSIO_T4VF_DEPENDS=y
# CONFIG_CHELSIO_T4VF is not set
CONFIG_ENIC=m
# CONFIG_IXGBE is not set
CONFIG_IXGB=m
CONFIG_S2IO=m
# CONFIG_VXGE is not set
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
CONFIG_MLX4_EN=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
# CONFIG_TEHUTI is not set
CONFIG_BNX2X=m
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_BNA is not set
CONFIG_SFC=m
# CONFIG_BE2NET is not set
CONFIG_TR=m
# CONFIG_IBMOL is not set
CONFIG_3C359=m
# CONFIG_TMS380TR is not set
# CONFIG_WLAN is not set
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
# CONFIG_WIMAX_I2400M_USB is not set
CONFIG_WIMAX_I2400M_SDIO=m
CONFIG_WIMAX_IWMC3200_SDIO=y
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC75XX is not set
CONFIG_USB_NET_SMSC95XX=m
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
CONFIG_USB_SIERRA_NET=m
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
# CONFIG_HDLC_RAW is not set
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=m
# CONFIG_HDLC_FR is not set
CONFIG_HDLC_PPP=m
#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
# CONFIG_ATM_ENI is not set
CONFIG_ATM_FIRESTREAM=m
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_ATM_SOLOS=m
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKEHARD=m
#
# CAIF transport drivers
#
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VMXNET3=m
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
CONFIG_ISDN_CAPI=m
# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_MIDDLEWARE=y
# CONFIG_ISDN_CAPI_CAPI20 is not set
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
# CONFIG_ISDN_DRV_AVMB1_B1PCI is not set
# CONFIG_ISDN_DRV_AVMB1_T1PCI is not set
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
# CONFIG_ISDN_DIVAS_PRIPCI is not set
# CONFIG_ISDN_DIVAS_DIVACAPI is not set
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_ISDN_DRV_GIGASET=m
# CONFIG_GIGASET_CAPI is not set
CONFIG_GIGASET_DUMMYLL=y
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
# CONFIG_GIGASET_M101 is not set
CONFIG_GIGASET_DEBUG=y
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
# CONFIG_MISDN is not set
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT2160 is not set
CONFIG_KEYBOARD_LKKBD=m
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_LM8323 is not set
CONFIG_KEYBOARD_MAX7359=m
# CONFIG_KEYBOARD_MCS is not set
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_OPENCORES=m
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_XTKBD=m
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=m
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=m
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_AS5011=m
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_PCF8574=m
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_PS2MULT=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
CONFIG_MOXA_INTELLIO=m
# CONFIG_MOXA_SMARTIO is not set
CONFIG_ISI=m
# CONFIG_SYNCLINK is not set
CONFIG_SYNCLINKMP=m
# CONFIG_SYNCLINK_GT is not set
CONFIG_N_HDLC=m
# CONFIG_N_GSM is not set
# CONFIG_RISCOM8 is not set
CONFIG_SPECIALIX=m
CONFIG_STALDRV=y
CONFIG_STALLION=m
# CONFIG_ISTALLION is not set
CONFIG_NOZOMI=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_TIMBERDALE=m
CONFIG_SERIAL_ALTERA_JTAGUART=m
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=m
# CONFIG_IPMI_WATCHDOG is not set
# CONFIG_IPMI_POWEROFF is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_NSC is not set
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_NFORCE2_S4985 is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_INTEL_MID=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_XILINX=m
CONFIG_I2C_EG20T=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=m
# CONFIG_W1_MASTER_DS2482 is not set
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
# CONFIG_W1_SLAVE_SMEM is not set
CONFIG_W1_SLAVE_DS2423=m
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=m
CONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_PDA_POWER is not set
CONFIG_TEST_POWER=m
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_BQ20Z75 is not set
CONFIG_BATTERY_BQ27x00=m
CONFIG_BATTERY_MAX17040=m
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_CHARGER_ISP1704=m
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
# CONFIG_SENSORS_ABITUGURU3 is not set
CONFIG_SENSORS_AD7414=m
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_ADM1025 is not set
CONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
# CONFIG_SENSORS_F71805F is not set
CONFIG_SENSORS_F71882FG=m
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_PKGTEMP is not set
# CONFIG_SENSORS_IBMAEM is not set
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM73=m
# CONFIG_SENSORS_LM75 is not set
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_LM95241=m
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP401=m
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83795=m
CONFIG_SENSORS_W83795_FANCTRL=y
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_LIS3_I2C=m
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_MFD_SUPPORT is not set
CONFIG_MFD_CORE=m
CONFIG_LPC_SCH=m
CONFIG_MFD_WL1273_CORE=m
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_DUMMY=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
CONFIG_REGULATOR_BQ24022=m
CONFIG_REGULATOR_MAX1586=m
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_LP3971=m
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
CONFIG_REGULATOR_ISL6271A=m
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_CUSTOMISE=y
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=m
# CONFIG_MEDIA_TUNER_TDA8290 is not set
# CONFIG_MEDIA_TUNER_TDA827X is not set
# CONFIG_MEDIA_TUNER_TDA18271 is not set
CONFIG_MEDIA_TUNER_TDA9887=m
# CONFIG_MEDIA_TUNER_TEA5761 is not set
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
# CONFIG_MEDIA_TUNER_MT2060 is not set
CONFIG_MEDIA_TUNER_MT2266=m
# CONFIG_MEDIA_TUNER_MT2131 is not set
# CONFIG_MEDIA_TUNER_QT1010 is not set
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
#
# Encoders/decoders and other helper chips
#
#
# Audio decoders
#
CONFIG_VIDEO_TVAUDIO=m
# CONFIG_VIDEO_TDA7432 is not set
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
CONFIG_VIDEO_MSP3400=m
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_M52790 is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
# CONFIG_VIDEO_KS0127 is not set
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_MT9V011=m
# CONFIG_VIDEO_TCM825X is not set
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_SAA7191 is not set
CONFIG_VIDEO_TVP514X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_TVP7002=m
CONFIG_VIDEO_VPX3220=m
#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=m
#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=m
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_THS7303=m
CONFIG_VIDEO_ADV7343=m
# CONFIG_VIDEO_AK881X is not set
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
# CONFIG_VIDEO_UPD64083 is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_MEYE is not set
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
# CONFIG_VIDEO_SAA7134_DVB is not set
# CONFIG_VIDEO_MXB is not set
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
# CONFIG_VIDEO_TIMBERDALE is not set
# CONFIG_VIDEO_AU0828 is not set
# CONFIG_VIDEO_SAA7164 is not set
CONFIG_VIDEO_CAFE_CCIC=m
# CONFIG_VIDEO_SR030PC30 is not set
CONFIG_SOC_CAMERA=m
# CONFIG_SOC_CAMERA_IMX074 is not set
# CONFIG_SOC_CAMERA_MT9M001 is not set
# CONFIG_SOC_CAMERA_MT9M111 is not set
CONFIG_SOC_CAMERA_MT9T031=m
# CONFIG_SOC_CAMERA_MT9T112 is not set
# CONFIG_SOC_CAMERA_MT9V022 is not set
# CONFIG_SOC_CAMERA_RJ54N1 is not set
CONFIG_SOC_CAMERA_TW9910=m
# CONFIG_SOC_CAMERA_PLATFORM is not set
CONFIG_SOC_CAMERA_OV2640=m
CONFIG_SOC_CAMERA_OV6650=m
# CONFIG_SOC_CAMERA_OV772X is not set
# CONFIG_SOC_CAMERA_OV9640 is not set
# CONFIG_V4L_USB_DRIVERS is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_TESTDEV is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_I2C_SI4713=m
CONFIG_RADIO_SI4713=m
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_SI470X is not set
# CONFIG_USB_MR800 is not set
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=m
# CONFIG_RADIO_TEF6862 is not set
CONFIG_RADIO_WL1273=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_AV=m
# CONFIG_DVB_BUDGET_PATCH is not set
#
# Supported USB Adapters
#
# CONFIG_DVB_TTUSB_BUDGET is not set
CONFIG_DVB_TTUSB_DEC=m
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported SDMC DM1105 Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_FIREWIRE=y
# CONFIG_DVB_FIREDTV_IEEE1394 is not set
CONFIG_DVB_FIREDTV_INPUT=y
#
# Supported Earthsoft PT1 Adapters
#
# CONFIG_DVB_PT1 is not set
#
# Supported Mantis Adapters
#
#
# Supported nGene Adapters
#
# CONFIG_DVB_NGENE is not set
#
# Supported DVB Frontends
#
CONFIG_DVB_FE_CUSTOMISE=y
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_STB0899 is not set
# CONFIG_DVB_STB6100 is not set
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_MT312 is not set
CONFIG_DVB_ZL10036=m
# CONFIG_DVB_ZL10039 is not set
CONFIG_DVB_S5H1420=m
# CONFIG_DVB_STV0288 is not set
# CONFIG_DVB_STB6000 is not set
# CONFIG_DVB_STV0299 is not set
CONFIG_DVB_STV6110=m
# CONFIG_DVB_STV0900 is not set
# CONFIG_DVB_TDA8083 is not set
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
# CONFIG_DVB_VES1X93 is not set
CONFIG_DVB_TUNER_ITD1000=m
# CONFIG_DVB_TUNER_CX24113 is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set
CONFIG_DVB_CX24116=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
# CONFIG_DVB_SP887X is not set
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_S5H1432=m
CONFIG_DVB_DRX397XD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
# CONFIG_DVB_TDA10048 is not set
# CONFIG_DVB_AF9013 is not set
CONFIG_DVB_EC100=m
#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_S5H1409=m
# CONFIG_DVB_AU8522 is not set
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
# CONFIG_DVB_DIB8000 is not set
# CONFIG_DVB_MB86A20S is not set
#
# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
CONFIG_DVB_ISL6423=m
# CONFIG_DVB_LGS8GL5 is not set
# CONFIG_DVB_LGS8GXX is not set
# CONFIG_DVB_ATBM8830 is not set
CONFIG_DVB_TDA665x=m
# CONFIG_DVB_IX2505V is not set
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_AMD64=m
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
CONFIG_AGP_VIA=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
# CONFIG_STUB_POULSBO is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=m
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
CONFIG_FB_FOREIGN_ENDIAN=y
# CONFIG_FB_BOTH_ENDIAN is not set
# CONFIG_FB_BIG_ENDIAN is not set
CONFIG_FB_LITTLE_ENDIAN=y
CONFIG_FB_SYS_FOPS=m
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=m
# CONFIG_FB_ATY128_BACKLIGHT is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_ARK=m
# CONFIG_FB_PM3 is not set
CONFIG_FB_CARMINE=m
# CONFIG_FB_CARMINE_DRAM_EVAL is not set
CONFIG_CARMINE_DRAM_CUSTOM=y
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
CONFIG_FB_UDL=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_BROADSHEET=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_BACKLIGHT_MBP_NVIDIA=m
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
# CONFIG_SND_ATIIXP is not set
CONFIG_SND_ATIIXP_MODEM=m
# CONFIG_SND_AU8810 is not set
CONFIG_SND_AU8820=m
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
CONFIG_SND_BT87X_OVERCLOCK=y
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
# CONFIG_SND_OXYGEN is not set
CONFIG_SND_CS4281=m
# CONFIG_SND_CS46XX is not set
CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_CTXFI=m
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
CONFIG_SND_INDIGOIO=m
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_INDIGOIOX=m
# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
# CONFIG_SND_ENS1370 is not set
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
# CONFIG_SND_HDA_GENERIC is not set
# CONFIG_SND_HDA_POWER_SAVE is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
# CONFIG_SND_ICE1712 is not set
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
CONFIG_SND_KORG1212=m
CONFIG_SND_LX6464ES=m
# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=m
# CONFIG_SND_SOC_CACHE_LZO is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
CONFIG_SND_SOC_ALL_CODECS=m
CONFIG_SND_SOC_WM_HUBS=m
CONFIG_SND_SOC_AD193X=m
CONFIG_SND_SOC_AD73311=m
CONFIG_SND_SOC_ADS117X=m
CONFIG_SND_SOC_AK4535=m
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_AK4671=m
CONFIG_SND_SOC_ALC5623=m
CONFIG_SND_SOC_CS42L51=m
CONFIG_SND_SOC_CS4270=m
CONFIG_SND_SOC_CX20442=m
CONFIG_SND_SOC_L3=m
CONFIG_SND_SOC_DA7210=m
CONFIG_SND_SOC_MAX98088=m
CONFIG_SND_SOC_PCM3008=m
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TLV320DAC33=m
CONFIG_SND_SOC_UDA134X=m
CONFIG_SND_SOC_UDA1380=m
CONFIG_SND_SOC_WL1273=m
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8580=m
CONFIG_SND_SOC_WM8711=m
CONFIG_SND_SOC_WM8727=m
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8737=m
CONFIG_SND_SOC_WM8741=m
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8753=m
CONFIG_SND_SOC_WM8776=m
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8900=m
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8904=m
CONFIG_SND_SOC_WM8940=m
CONFIG_SND_SOC_WM8955=m
CONFIG_SND_SOC_WM8960=m
CONFIG_SND_SOC_WM8961=m
CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_WM8971=m
CONFIG_SND_SOC_WM8974=m
CONFIG_SND_SOC_WM8978=m
CONFIG_SND_SOC_WM8985=m
CONFIG_SND_SOC_WM8988=m
CONFIG_SND_SOC_WM8990=m
CONFIG_SND_SOC_WM8993=m
CONFIG_SND_SOC_WM8995=m
CONFIG_SND_SOC_WM9081=m
CONFIG_SND_SOC_MAX9877=m
CONFIG_SND_SOC_TPA6130A2=m
CONFIG_SND_SOC_WM2000=m
CONFIG_SND_SOC_WM9090=m
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
CONFIG_SOUND_DMAP=y
# CONFIG_SOUND_VMIDI is not set
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
# CONFIG_SC6600_JOY is not set
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX_FF=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CANDO=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CYPRESS=m
# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EMS_FF=m
CONFIG_HID_EGALAX=m
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=m
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_LOGIG940_FF=y
# CONFIG_LOGIWII_FF is not set
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MOSART=m
CONFIG_HID_MONTEREY=m
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PETALYNX is not set
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
# CONFIG_HID_QUANTA is not set
CONFIG_HID_ROCCAT=m
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_ROCCAT_KONEPLUS is not set
CONFIG_HID_ROCCAT_PYRA=m
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
CONFIG_USB_WUSB_CBAF_DEBUG=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_OXU210HP_HCD=m
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=m
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
CONFIG_USB_UAS=m
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=m
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
# CONFIG_USB_SERIAL_EDGEPORT is not set
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=m
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
CONFIG_USB_SERIAL_QCAUX=m
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SAMBA=m
CONFIG_USB_SERIAL_SIEMENS_MPI=m
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
CONFIG_USB_SERIAL_ZIO=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=m
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_NOP_USB_XCEIV=m
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_CLKGATE=y
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
# CONFIG_MMC_BLOCK_BOUNCE is not set
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=m
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
# CONFIG_MMC_RICOH_MMC is not set
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_CB710 is not set
CONFIG_MMC_VIA_SDMMC=m
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP5521=m
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_REGULATOR=m
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
# CONFIG_LEDS_TRIGGERS is not set
#
# LED Triggers
#
# CONFIG_NFC_DEVICES is not set
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
CONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF8563=m
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
CONFIG_INTEL_IOATDMA=m
CONFIG_TIMB_DMA=m
# CONFIG_PCH_DMA is not set
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_ASYNC_TX_DMA is not set
CONFIG_DMATEST=m
CONFIG_DCA=m
CONFIG_AUXDISPLAY=y
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV=m
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
CONFIG_ASUS_LAPTOP=m
# CONFIG_DELL_WMI is not set
# CONFIG_FUJITSU_LAPTOP is not set
CONFIG_HP_WMI=m
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_ALSA_SUPPORT is not set
CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
CONFIG_THINKPAD_ACPI_DEBUG=y
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
# CONFIG_THINKPAD_ACPI_VIDEO is not set
# CONFIG_THINKPAD_ACPI_HOTKEY_POLL is not set
CONFIG_SENSORS_HDAPS=m
# CONFIG_EEEPC_WMI is not set
CONFIG_ACPI_WMI=m
# CONFIG_MSI_WMI is not set
# CONFIG_ACPI_ASUS is not set
CONFIG_TOPSTAR_LAPTOP=m
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
CONFIG_ACPI_CMPC=m
CONFIG_INTEL_IPS=m
# CONFIG_IBM_RTL is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_EFI_VARS is not set
CONFIG_DELL_RBU=m
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
# CONFIG_EXT4_USE_FOR_EXT23 is not set
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
CONFIG_BFS_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
# CONFIG_EXOFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=m
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=m
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=m
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=m
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
CONFIG_DEBUG_OBJECTS_FREE=y
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_SLUB_STATS=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_BKL=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_REPEATEDLY is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
CONFIG_TEST_LIST_SORT=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
CONFIG_BACKTRACE_SELF_TEST=m
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_LKDTM=m
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAIL_MAKE_REQUEST is not set
# CONFIG_FAIL_IO_TIMEOUT is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENT=y
# CONFIG_DYNAMIC_FTRACE is not set
CONFIG_FUNCTION_PROFILER=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DMA_API_DEBUG=y
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
# CONFIG_KGDB_SERIAL_CONSOLE is not set
# CONFIG_KGDB_TESTS is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
# CONFIG_KGDB_KDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_AUDIT=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=m
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=m
# CONFIG_CRYPTO_USER_API_HASH is not set
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_NLATTR=y
[-- Attachment #3: crash.log --]
[-- Type: text/plain, Size: 14243 bytes --]
[ 0.000000] Linux version 2.6.38-rc1 (mingo@sirius) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #86551 SMP Wed Jan 19 14:11:47 CET 2011
[ 0.000000] Command line: root=/dev/sda6 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: A8N-E/System Product Name, BIOS ASUS A8N-E ACPI BIOS Revision 1008 08/22/2005
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f5680] f5680
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000003fff0000
[ 0.000000] 0000000000 - 003fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 3fff0000 @ 1fdfe000-20000000
[ 0.000000] ACPI: RSDP 00000000000f76f0 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 000000003fff3040 00034 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 000000003fff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 000000003fff3180 06264 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 000000003fff0000 00040
[ 0.000000] ACPI: SRAT 000000003fff9500 000A0 (v01 AMD HAMMER 00000001 AMD 00000001)
[ 0.000000] ACPI: MCFG 000000003fff9600 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 000000003fff9440 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003e600000-ffff88003f3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262015
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3528 pages used for memmap
[ 0.000000] DMA32 zone: 254504 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88003fc00000 s75008 r8192 d23296 u1048576
[ 0.000000] pcpu-alloc: s75008 r8192 d23296 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258425
[ 0.000000] Kernel command line: root=/dev/sda6 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 38000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Memory: 1009692k/1048512k available (3682k kernel code, 452k absent, 38368k reserved, 4377k data, 512k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU lockdep checking is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:4352
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at kernel/smp.c:433 smp_call_function_many+0x90/0x209()
[ 0.000000] Hardware name: System Product Name
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.38-rc1 #86551
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff8103f544>] ? warn_slowpath_common+0x85/0x9d
[ 0.000000] [<ffffffff81027218>] ? do_flush_tlb_all+0x0/0x4d
[ 0.000000] [<ffffffff81027218>] ? do_flush_tlb_all+0x0/0x4d
[ 0.000000] [<ffffffff8103f576>] ? warn_slowpath_null+0x1a/0x1c
[ 0.000000] [<ffffffff810760df>] ? smp_call_function_many+0x90/0x209
[ 0.000000] [<ffffffff810cc7ca>] ? pcpu_mem_alloc+0x65/0x67
[ 0.000000] [<ffffffff81027218>] ? do_flush_tlb_all+0x0/0x4d
[ 0.000000] [<ffffffff8107627a>] ? smp_call_function+0x22/0x26
[ 0.000000] [<ffffffff81076299>] ? on_each_cpu+0x1b/0x39
[ 0.000000] [<ffffffff810274e6>] ? flush_tlb_all+0x1c/0x1e
[ 0.000000] [<ffffffff810dc7d7>] ? remove_vm_area+0x71/0x96
[ 0.000000] [<ffffffff810dc868>] ? __vunmap+0x3f/0xcf
[ 0.000000] [<ffffffff810dc9db>] ? vfree+0x2c/0x2e
[ 0.000000] [<ffffffff810ccca6>] ? pcpu_mem_free+0x1e/0x20
[ 0.000000] [<ffffffff810ccd75>] ? pcpu_extend_area_map+0x9a/0xb6
[ 0.000000] [<ffffffff810cd452>] ? pcpu_alloc+0x17e/0x916
[ 0.000000] [<ffffffff8106bb00>] ? trace_hardirqs_off+0xd/0xf
[ 0.000000] [<ffffffff810e5bed>] ? kmem_cache_alloc_trace+0xab/0x120
[ 0.000000] [<ffffffff810cdbfa>] ? __alloc_percpu+0x10/0x12
[ 0.000000] [<ffffffff8180afd4>] ? early_irq_init+0xb2/0x13d
[ 0.000000] [<ffffffff817f4a06>] ? start_kernel+0x1fa/0x3a4
[ 0.000000] [<ffffffff817f42a6>] ? x86_64_start_reservations+0xb6/0xba
[ 0.000000] [<ffffffff817f43a1>] ? x86_64_start_kernel+0xf7/0xfe
[ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at kernel/lockdep.c:2322 trace_hardirqs_on_caller+0xae/0x12c()
[ 0.000000] Hardware name: System Product Name
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Tainted: G W 2.6.38-rc1 #86551
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff8103f544>] ? warn_slowpath_common+0x85/0x9d
[ 0.000000] [<ffffffff810762ac>] ? on_each_cpu+0x2e/0x39
[ 0.000000] [<ffffffff8103f576>] ? warn_slowpath_null+0x1a/0x1c
[ 0.000000] [<ffffffff81070350>] ? trace_hardirqs_on_caller+0xae/0x12c
[ 0.000000] [<ffffffff81027218>] ? do_flush_tlb_all+0x0/0x4d
[ 0.000000] [<ffffffff810703db>] ? trace_hardirqs_on+0xd/0xf
[ 0.000000] [<ffffffff810762ac>] ? on_each_cpu+0x2e/0x39
[ 0.000000] [<ffffffff810274e6>] ? flush_tlb_all+0x1c/0x1e
[ 0.000000] [<ffffffff810dc7d7>] ? remove_vm_area+0x71/0x96
[ 0.000000] [<ffffffff810dc868>] ? __vunmap+0x3f/0xcf
[ 0.000000] [<ffffffff810dc9db>] ? vfree+0x2c/0x2e
[ 0.000000] [<ffffffff810ccca6>] ? pcpu_mem_free+0x1e/0x20
[ 0.000000] [<ffffffff810ccd75>] ? pcpu_extend_area_map+0x9a/0xb6
[ 0.000000] [<ffffffff810cd452>] ? pcpu_alloc+0x17e/0x916
[ 0.000000] [<ffffffff8106bb00>] ? trace_hardirqs_off+0xd/0xf
[ 0.000000] [<ffffffff810e5bed>] ? kmem_cache_alloc_trace+0xab/0x120
[ 0.000000] [<ffffffff810cdbfa>] ? __alloc_percpu+0x10/0x12
[ 0.000000] [<ffffffff8180afd4>] ? early_irq_init+0xb2/0x13d
[ 0.000000] [<ffffffff817f4a06>] ? start_kernel+0x1fa/0x3a4
[ 0.000000] [<ffffffff817f42a6>] ? x86_64_start_reservations+0xb6/0xba
[ 0.000000] [<ffffffff817f43a1>] ? x86_64_start_kernel+0xf7/0xfe
[ 0.000000] ---[ end trace 4eaa2a86a8e2da23 ]---
[ 0.000000] general protection fault: 01bb [#1] SMP DEBUG_PAGEALLOC
[ 0.000000] last sysfs file:
[ 0.000000] CPU 0
[ 0.000000] Modules linked in:
[ 0.000000]
[ 0.000000] Pid: 0, comm: swapper Tainted: G W 2.6.38-rc1 #86551 A8N-E/System Product Name
[ 0.000000] RIP: 0010:[<ffffffff8138fb5c>] [<ffffffff8138fb5c>] _raw_spin_unlock_irqrestore+0x41/0x46
[ 0.000000] RSP: 0000:ffffffff81601ec8 EFLAGS: 00010246
[ 0.000000] RAX: 0000000000000000 RBX: 0000000000000246 RCX: 0000000000000000
[ 0.000000] RDX: 0000000000010000 RSI: 0000000000000001 RDI: ffffffff8138fb5a
[ 0.000000] RBP: ffffffff81601ed8 R08: ffffffffffffffff R09: 0000000000000001
[ 0.000000] R10: ffffffff81601e78 R11: 0000000000000000 R12: ffffffff81762690
[ 0.000000] R13: ffffffff8153b5ce R14: ffffffffffffffff R15: 0000000000000000
[ 0.000000] FS: 0000000000000000(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
[ 0.000000] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 0.000000] CR2: 0000000000f06f53 CR3: 0000000001757000 CR4: 00000000000006b0
[ 0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 0.000000] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 0.000000] Process swapper (pid: 0, threadinfo ffffffff81600000, task ffffffff8175f020)
[ 0.000000] Stack:
[ 0.000000] 0000000000000000 0000000000000246 ffffffff81601ef8 ffffffff810068a4
[ 0.000000] 0000000000000000 ffffffff817626d0 ffffffff81601f28 ffffffff817f7d71
[ 0.000000] 0000000000001100 ffffffff81828760 ffffffff8182a2c0 ffff88003ffdc380
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff810068a4>] init_8259A+0xe3/0xe8
[ 0.000000] [<ffffffff817f7d71>] init_ISA_irqs+0x2f/0x5a
[ 0.000000] [<ffffffff817f7de1>] native_init_IRQ+0xe/0xa2
[ 0.000000] [<ffffffff817f7dd1>] init_IRQ+0x35/0x37
[ 0.000000] [<ffffffff817f4a0b>] start_kernel+0x1ff/0x3a4
[ 0.000000] [<ffffffff817f42a6>] x86_64_start_reservations+0xb6/0xba
[ 0.000000] [<ffffffff817f43a1>] x86_64_start_kernel+0xf7/0xfe
[ 0.000000] Code: 18 48 89 f3 be 01 00 00 00 e8 33 fe cd ff 4c 89 e7 e8 77 1f e2 ff f6 c7 02 75 09 53 9d e8 a0 bf cd ff eb 07 e8 74 08 ce ff 53 9d <5b> 41 5c c9 c3 55 48 89 e5 53 48 83 ec 08 e8 91 2c c7 ff 48 8b
[ 0.000000] RIP [<ffffffff8138fb5c>] _raw_spin_unlock_irqrestore+0x41/0x46
[ 0.000000] RSP <ffffffff81601ec8>
[ 0.000000] ---[ end trace 4eaa2a86a8e2da24 ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[ 0.000000] Pid: 0, comm: swapper Tainted: G D W 2.6.38-rc1 #86551
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff8138c237>] ? panic+0x91/0x199
[ 0.000000] [<ffffffff81042e2a>] ? do_exit+0x7b/0x770
[ 0.000000] [<ffffffff81040c00>] ? kmsg_dump+0x8b/0x13b
[ 0.000000] [<ffffffff81390e09>] ? oops_end+0xb7/0xbf
[ 0.000000] [<ffffffff810064a8>] ? die+0x5a/0x66
[ 0.000000] [<ffffffff813907fb>] ? do_general_protection+0x134/0x13c
[ 0.000000] [<ffffffff81390030>] ? irq_return+0x0/0x2
[ 0.000000] [<ffffffff813901bf>] ? general_protection+0x1f/0x30
[ 0.000000] [<ffffffff8138fb5a>] ? _raw_spin_unlock_irqrestore+0x3f/0x46
[ 0.000000] [<ffffffff8138fb5c>] ? _raw_spin_unlock_irqrestore+0x41/0x46
[ 0.000000] [<ffffffff810068a4>] ? init_8259A+0xe3/0xe8
[ 0.000000] [<ffffffff817f7d71>] ? init_ISA_irqs+0x2f/0x5a
[ 0.000000] [<ffffffff817f7de1>] ? native_init_IRQ+0xe/0xa2
[ 0.000000] [<ffffffff817f7dd1>] ? init_IRQ+0x35/0x37
[ 0.000000] [<ffffffff817f4a0b>] ? start_kernel+0x1ff/0x3a4
[ 0.000000] [<ffffffff817f42a6>] ? x86_64_start_reservations+0xb6/0xba
[ 0.000000] [<ffffffff817f43a1>] ? x86_64_start_kernel+0xf7/0xfe
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: percpu related boot crash on x86 (was: Linux 2.6.38-rc1)
2011-01-19 12:02 ` percpu related boot crash on x86 (was: Linux 2.6.38-rc1) Ingo Molnar
@ 2011-01-19 12:44 ` Tejun Heo
2011-01-19 12:48 ` Peter Zijlstra
2011-01-20 11:06 ` [PATCH 1/2] lockdep: move early boot local IRQ enable/disable status to init/main.c Tejun Heo
2 siblings, 0 replies; 69+ messages in thread
From: Tejun Heo @ 2011-01-19 12:44 UTC (permalink / raw)
To: Ingo Molnar
Cc: Linus Torvalds, Linux Kernel Mailing List, Thomas Gleixner,
H. Peter Anvin, Peter Zijlstra, Andrew Morton, Pekka Enberg
Hello, Ingo.
On Wed, Jan 19, 2011 at 01:02:00PM +0100, Ingo Molnar wrote:
>
> There's a rather frequent, percpu related boot crash that I can see with .38-rc1:
> [ 0.000000] NR_IRQS:4352
> [ 0.000000] ------------[ cut here ]------------
> [ 0.000000] WARNING: at kernel/smp.c:433 smp_call_function_many+0x90/0x209()
...
> [ 0.000000] [<ffffffff81076299>] ? on_each_cpu+0x1b/0x39
> [ 0.000000] [<ffffffff810274e6>] ? flush_tlb_all+0x1c/0x1e
> [ 0.000000] [<ffffffff810dc7d7>] ? remove_vm_area+0x71/0x96
> [ 0.000000] [<ffffffff810dc868>] ? __vunmap+0x3f/0xcf
> [ 0.000000] [<ffffffff810dc9db>] ? vfree+0x2c/0x2e
> [ 0.000000] [<ffffffff810ccca6>] ? pcpu_mem_free+0x1e/0x20
> [ 0.000000] [<ffffffff810ccd75>] ? pcpu_extend_area_map+0x9a/0xb6
> [ 0.000000] [<ffffffff810cd452>] ? pcpu_alloc+0x17e/0x916
> [ 0.000000] [<ffffffff8106bb00>] ? trace_hardirqs_off+0xd/0xf
> [ 0.000000] [<ffffffff810e5bed>] ? kmem_cache_alloc_trace+0xab/0x120
> [ 0.000000] [<ffffffff810cdbfa>] ? __alloc_percpu+0x10/0x12
> [ 0.000000] [<ffffffff8180afd4>] ? early_irq_init+0xb2/0x13d
...
This is vfree() path used before local irq is enabled during early
boot. vfree() triggered TLB flush (maybe debug enabled?) which used
on_each_cpu() which isn't quite happy to be called with local irq
diabled.
> [ 0.000000] general protection fault: 01bb [#1] SMP DEBUG_PAGEALLOC
...
> [ 0.000000] Call Trace:
> [ 0.000000] [<ffffffff810068a4>] init_8259A+0xe3/0xe8
> [ 0.000000] [<ffffffff817f7d71>] init_ISA_irqs+0x2f/0x5a
> [ 0.000000] [<ffffffff817f7de1>] native_init_IRQ+0xe/0xa2
> [ 0.000000] [<ffffffff817f7dd1>] init_IRQ+0x35/0x37
> [ 0.000000] [<ffffffff817f4a0b>] start_kernel+0x1ff/0x3a4
> [ 0.000000] [<ffffffff817f42a6>] x86_64_start_reservations+0xb6/0xba
> [ 0.000000] [<ffffffff817f43a1>] x86_64_start_kernel+0xf7/0xfe
> [ 0.000000] Code: 18 48 89 f3 be 01 00 00 00 e8 33 fe cd ff 4c 89 e7 e8 77 1f e2 ff f6 c7 02 75 09 53 9d e8 a0 bf cd ff eb 07 e8 74 08 ce ff 53 9d <5b> 41 5c c9 c3 55 48 89 e5 53 48 83 ec 08 e8 91 2c c7 ff 48 8b
> [ 0.000000] RIP [<ffffffff8138fb5c>] _raw_spin_unlock_irqrestore+0x41/0x4
and this looks like alloc_percpu() failed earlier during early irq
init. The irq init functions don't check for NULL return so it just
goes off later. I'll see if I can reproduce the problem here.
It doesn't look like anything hardware dependent. The first warning
seems more or less spurious and the GPF seems to be caused by earlier
memory allocation failure. It's a bit curious that the allocation
failed on a x86_64 machine tho.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: percpu related boot crash on x86 (was: Linux 2.6.38-rc1)
2011-01-19 12:02 ` percpu related boot crash on x86 (was: Linux 2.6.38-rc1) Ingo Molnar
2011-01-19 12:44 ` Tejun Heo
@ 2011-01-19 12:48 ` Peter Zijlstra
2011-01-19 12:56 ` Pekka Enberg
2011-01-20 11:06 ` [PATCH 1/2] lockdep: move early boot local IRQ enable/disable status to init/main.c Tejun Heo
2 siblings, 1 reply; 69+ messages in thread
From: Peter Zijlstra @ 2011-01-19 12:48 UTC (permalink / raw)
To: Ingo Molnar
Cc: Linus Torvalds, Tejun Heo, Linux Kernel Mailing List,
Thomas Gleixner, H. Peter Anvin, Andrew Morton, Pekka Enberg
On Wed, 2011-01-19 at 13:02 +0100, Ingo Molnar wrote:
> There's a rather frequent, percpu related boot crash that I can see with .38-rc1:
>
> [ 0.000000] NR_IRQS:4352
> [ 0.000000] ------------[ cut here ]------------
> [ 0.000000] WARNING: at kernel/smp.c:433 smp_call_function_many+0x90/0x209()
> [ 0.000000] Hardware name: System Product Name
> [ 0.000000] Modules linked in:
> [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.38-rc1 #86551
> [ 0.000000] Call Trace:
> [ 0.000000] [<ffffffff8103f544>] ? warn_slowpath_common+0x85/0x9d
> [ 0.000000] [<ffffffff81027218>] ? do_flush_tlb_all+0x0/0x4d
> [ 0.000000] [<ffffffff81027218>] ? do_flush_tlb_all+0x0/0x4d
> [ 0.000000] [<ffffffff8103f576>] ? warn_slowpath_null+0x1a/0x1c
> [ 0.000000] [<ffffffff810760df>] ? smp_call_function_many+0x90/0x209
> [ 0.000000] [<ffffffff810cc7ca>] ? pcpu_mem_alloc+0x65/0x67
> [ 0.000000] [<ffffffff81027218>] ? do_flush_tlb_all+0x0/0x4d
> [ 0.000000] [<ffffffff8107627a>] ? smp_call_function+0x22/0x26
> [ 0.000000] [<ffffffff81076299>] ? on_each_cpu+0x1b/0x39
> [ 0.000000] [<ffffffff810274e6>] ? flush_tlb_all+0x1c/0x1e
> [ 0.000000] [<ffffffff810dc7d7>] ? remove_vm_area+0x71/0x96
> [ 0.000000] [<ffffffff810dc868>] ? __vunmap+0x3f/0xcf
> [ 0.000000] [<ffffffff810dc9db>] ? vfree+0x2c/0x2e
> [ 0.000000] [<ffffffff810ccca6>] ? pcpu_mem_free+0x1e/0x20
> [ 0.000000] [<ffffffff810ccd75>] ? pcpu_extend_area_map+0x9a/0xb6
> [ 0.000000] [<ffffffff810cd452>] ? pcpu_alloc+0x17e/0x916
> [ 0.000000] [<ffffffff8106bb00>] ? trace_hardirqs_off+0xd/0xf
> [ 0.000000] [<ffffffff810e5bed>] ? kmem_cache_alloc_trace+0xab/0x120
> [ 0.000000] [<ffffffff810cdbfa>] ? __alloc_percpu+0x10/0x12
> [ 0.000000] [<ffffffff8180afd4>] ? early_irq_init+0xb2/0x13d
> [ 0.000000] [<ffffffff817f4a06>] ? start_kernel+0x1fa/0x3a4
> [ 0.000000] [<ffffffff817f42a6>] ? x86_64_start_reservations+0xb6/0xba
> [ 0.000000] [<ffffffff817f43a1>] ? x86_64_start_kernel+0xf7/0xfe
> [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
> [ 0.000000] ------------[ cut here ]------------
You config had CONFIG_FRAME_POINTER=y, still its all '?', did out
backtrace code go funny in the head?
start_kernel()
local_irq_disable()
...
early_irq_init()
alloc_desc()
alloc_percpu()
__alloc_percpu()
pcpu_alloc()
pcpu_extend_area_map()
pcpu_mem_free()
vfree()
__vunmap()
remove_vm_area()
free_unmap_vmap_area()
vmap_debug_free_range()
#ifdef CONFIG_DEBUG_PAGEALLOC
flush_tlb_kernel_range()
flush_tlb_all()
on_each_cpu()
smp_call_function()
WARN_ON_ONCE(irqs_disabled()....);
Not quite sure that to do about that though..
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: percpu related boot crash on x86 (was: Linux 2.6.38-rc1)
2011-01-19 12:48 ` Peter Zijlstra
@ 2011-01-19 12:56 ` Pekka Enberg
2011-01-19 13:12 ` Peter Zijlstra
2011-01-19 13:13 ` Tejun Heo
0 siblings, 2 replies; 69+ messages in thread
From: Pekka Enberg @ 2011-01-19 12:56 UTC (permalink / raw)
To: Peter Zijlstra
Cc: Ingo Molnar, Linus Torvalds, Tejun Heo,
Linux Kernel Mailing List, Thomas Gleixner, H. Peter Anvin,
Andrew Morton, Pekka Enberg
On Wed, 2011-01-19 at 13:02 +0100, Ingo Molnar wrote:
>> There's a rather frequent, percpu related boot crash that I can see with .38-rc1:
>>
>> [ 0.000000] NR_IRQS:4352
>> [ 0.000000] ------------[ cut here ]------------
>> [ 0.000000] WARNING: at kernel/smp.c:433 smp_call_function_many+0x90/0x209()
>> [ 0.000000] Hardware name: System Product Name
>> [ 0.000000] Modules linked in:
>> [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.38-rc1 #86551
>> [ 0.000000] Call Trace:
>> [ 0.000000] [<ffffffff8103f544>] ? warn_slowpath_common+0x85/0x9d
>> [ 0.000000] [<ffffffff81027218>] ? do_flush_tlb_all+0x0/0x4d
>> [ 0.000000] [<ffffffff81027218>] ? do_flush_tlb_all+0x0/0x4d
>> [ 0.000000] [<ffffffff8103f576>] ? warn_slowpath_null+0x1a/0x1c
>> [ 0.000000] [<ffffffff810760df>] ? smp_call_function_many+0x90/0x209
>> [ 0.000000] [<ffffffff810cc7ca>] ? pcpu_mem_alloc+0x65/0x67
>> [ 0.000000] [<ffffffff81027218>] ? do_flush_tlb_all+0x0/0x4d
>> [ 0.000000] [<ffffffff8107627a>] ? smp_call_function+0x22/0x26
>> [ 0.000000] [<ffffffff81076299>] ? on_each_cpu+0x1b/0x39
>> [ 0.000000] [<ffffffff810274e6>] ? flush_tlb_all+0x1c/0x1e
>> [ 0.000000] [<ffffffff810dc7d7>] ? remove_vm_area+0x71/0x96
>> [ 0.000000] [<ffffffff810dc868>] ? __vunmap+0x3f/0xcf
>> [ 0.000000] [<ffffffff810dc9db>] ? vfree+0x2c/0x2e
>> [ 0.000000] [<ffffffff810ccca6>] ? pcpu_mem_free+0x1e/0x20
>> [ 0.000000] [<ffffffff810ccd75>] ? pcpu_extend_area_map+0x9a/0xb6
>> [ 0.000000] [<ffffffff810cd452>] ? pcpu_alloc+0x17e/0x916
>> [ 0.000000] [<ffffffff8106bb00>] ? trace_hardirqs_off+0xd/0xf
>> [ 0.000000] [<ffffffff810e5bed>] ? kmem_cache_alloc_trace+0xab/0x120
>> [ 0.000000] [<ffffffff810cdbfa>] ? __alloc_percpu+0x10/0x12
>> [ 0.000000] [<ffffffff8180afd4>] ? early_irq_init+0xb2/0x13d
>> [ 0.000000] [<ffffffff817f4a06>] ? start_kernel+0x1fa/0x3a4
>> [ 0.000000] [<ffffffff817f42a6>] ? x86_64_start_reservations+0xb6/0xba
>> [ 0.000000] [<ffffffff817f43a1>] ? x86_64_start_kernel+0xf7/0xfe
>> [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
>> [ 0.000000] ------------[ cut here ]------------
>
> You config had CONFIG_FRAME_POINTER=y, still its all '?', did out
> backtrace code go funny in the head?
On Wed, Jan 19, 2011 at 2:48 PM, Peter Zijlstra <a.p.zijlstra@chello.nl> wrote:
> start_kernel()
> local_irq_disable()
> ...
> early_irq_init()
> alloc_desc()
> alloc_percpu()
> __alloc_percpu()
> pcpu_alloc()
> pcpu_extend_area_map()
> pcpu_mem_free()
> vfree()
> __vunmap()
> remove_vm_area()
> free_unmap_vmap_area()
> vmap_debug_free_range()
> #ifdef CONFIG_DEBUG_PAGEALLOC
> flush_tlb_kernel_range()
> flush_tlb_all()
> on_each_cpu()
> smp_call_function()
> WARN_ON_ONCE(irqs_disabled()....);
>
>
> Not quite sure that to do about that though..
Is vmalloc() and vfree() supposed to work with interrupts disabled? I
always thought they weren't which would mean something in
pcpu_mem_alloc() needs changing...
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: percpu related boot crash on x86 (was: Linux 2.6.38-rc1)
2011-01-19 12:56 ` Pekka Enberg
@ 2011-01-19 13:12 ` Peter Zijlstra
2011-01-19 13:13 ` Tejun Heo
1 sibling, 0 replies; 69+ messages in thread
From: Peter Zijlstra @ 2011-01-19 13:12 UTC (permalink / raw)
To: Pekka Enberg
Cc: Ingo Molnar, Linus Torvalds, Tejun Heo,
Linux Kernel Mailing List, Thomas Gleixner, H. Peter Anvin,
Andrew Morton, Pekka Enberg
On Wed, 2011-01-19 at 14:56 +0200, Pekka Enberg wrote:
>
> On Wed, Jan 19, 2011 at 2:48 PM, Peter Zijlstra
> <a.p.zijlstra@chello.nl> wrote:
> > start_kernel()
> > local_irq_disable()
> > ...
> > early_irq_init()
> > alloc_desc()
> > alloc_percpu()
> > __alloc_percpu()
> > pcpu_alloc()
> > pcpu_extend_area_map()
> > pcpu_mem_free()
> > vfree()
> > __vunmap()
> > remove_vm_area()
> > free_unmap_vmap_area()
> > vmap_debug_free_range()
> > #ifdef CONFIG_DEBUG_PAGEALLOC
> > flush_tlb_kernel_range()
> > flush_tlb_all()
> > on_each_cpu()
> > smp_call_function()
> > WARN_ON_ONCE(irqs_disabled()....);
> >
> >
> > Not quite sure that to do about that though..
>
> Is vmalloc() and vfree() supposed to work with interrupts disabled?
I'm not sure about vmalloc(), but vfree() has been known to not work
with IRQs disabled for a long long while.
Looking at the code neither can work, since vmalloc() can end up calling
vfree(), what's curious though is that all the BUG_ON()s in there are on
in_interrupt() instead of for irqs_disabled().
> I always thought they weren't which would mean something in
> pcpu_mem_alloc() needs changing...
Is alloc_percpu() supposed to work from atomic context?
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: percpu related boot crash on x86 (was: Linux 2.6.38-rc1)
2011-01-19 12:56 ` Pekka Enberg
2011-01-19 13:12 ` Peter Zijlstra
@ 2011-01-19 13:13 ` Tejun Heo
2011-01-19 20:53 ` Ingo Molnar
1 sibling, 1 reply; 69+ messages in thread
From: Tejun Heo @ 2011-01-19 13:13 UTC (permalink / raw)
To: Pekka Enberg
Cc: Peter Zijlstra, Ingo Molnar, Linus Torvalds,
Linux Kernel Mailing List, Thomas Gleixner, H. Peter Anvin,
Andrew Morton, Pekka Enberg
Hello,
On Wed, Jan 19, 2011 at 02:56:23PM +0200, Pekka Enberg wrote:
> Is vmalloc() and vfree() supposed to work with interrupts disabled? I
> always thought they weren't which would mean something in
> pcpu_mem_alloc() needs changing...
They aren't but percpu allocator doesn't call them with interrupts
disabled normally. It only happens during early boot before it's
enabled for the first time but this is an allowed exception. We'll
probably need to update the WARN_ON to consider the rare call path.
It also looks like something in that path is turning off/on IRQ
instead of saving/restoring it, so that probably needs to be changed
too but both aren't really critical.
I think the real problem is a lot of unsigned int percpu allocations
added by 6c9ae009 (irq: use per_cpu kstat_irqs). percpu allocator
should be able to cope but it assumes that it would always be able to
allocate contiguous allocation map using vmalloc and that might be
failing, although I cannot readily see how or why that would happen
frequently on a 64bit machine.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1
2011-01-19 5:56 ` Linus Torvalds
@ 2011-01-19 18:07 ` Steven Rostedt
2011-01-19 18:26 ` Linus Torvalds
0 siblings, 1 reply; 69+ messages in thread
From: Steven Rostedt @ 2011-01-19 18:07 UTC (permalink / raw)
To: Linus Torvalds; +Cc: nobody, Linux Kernel Mailing List
On Tue, Jan 18, 2011 at 09:56:38PM -0800, Linus Torvalds wrote:
>
> Btw, what may confuse you a bit is that the on-disk representation of
> the newly received pack ends up being about 69MB, ie the 21MiB of
> network traffic almost tripled in size as a result of that "resolving
> deltas" thing. That's because git pack-files are designed to always be
> stand-alone, so on disk, the pack-file will always contain the base
> objects needed to expand all the deltas.
When I first started using git (2006?) I was recommended to use "-k"
when doing a fetch or pull. I don't even remember why it was
recommended. I still do it, but is it necessary?
All the help says is:
-k, --keep
Keep downloaded pack.
-- Steve
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1
2011-01-19 18:07 ` Steven Rostedt
@ 2011-01-19 18:26 ` Linus Torvalds
0 siblings, 0 replies; 69+ messages in thread
From: Linus Torvalds @ 2011-01-19 18:26 UTC (permalink / raw)
To: Steven Rostedt; +Cc: nobody, Linux Kernel Mailing List
On Wed, Jan 19, 2011 at 10:07 AM, Steven Rostedt <rostedt@goodmis.org> wrote:
>
> When I first started using git (2006?) I was recommended to use "-k"
> when doing a fetch or pull. I don't even remember why it was
> recommended. I still do it, but is it necessary?
>
> All the help says is:
>
> -k, --keep
> Keep downloaded pack.
That's a different issue. That marks the resulting pack for "keeping",
which means that it won't participate in garbage collection.
IOW, it's a bad idea.
There _is_ a reason for it, namely that if your machine is really
slow, you may want to mark big packs for keeping, so that when you do
a gc it will be cheaper to do. In particular, the initial clone/fetch
may well be worth marking "keep". But even that is really only worth
it if you have such a slow machine (or the machine has too little
memory) that repacking is really a big pain (it's not like you need to
do gc very often - once a week would be overkill for most projects).
(There can be other reasons to mark packs as "keep" - namely to help
with http/rsync of the resulting archive if you have a huge amount of
history. In that case, it might be worthwhile keeping historical data
as a "keep" pack, so that rsync/http don't need to re-fetch it after a
GC or repack event.)
Linus
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: percpu related boot crash on x86 (was: Linux 2.6.38-rc1)
2011-01-19 13:13 ` Tejun Heo
@ 2011-01-19 20:53 ` Ingo Molnar
2011-01-19 23:11 ` Ingo Molnar
0 siblings, 1 reply; 69+ messages in thread
From: Ingo Molnar @ 2011-01-19 20:53 UTC (permalink / raw)
To: Tejun Heo
Cc: Pekka Enberg, Peter Zijlstra, Linus Torvalds,
Linux Kernel Mailing List, Thomas Gleixner, H. Peter Anvin,
Andrew Morton, Pekka Enberg
* Tejun Heo <tj@kernel.org> wrote:
> Hello,
>
> On Wed, Jan 19, 2011 at 02:56:23PM +0200, Pekka Enberg wrote:
> > Is vmalloc() and vfree() supposed to work with interrupts disabled? I
> > always thought they weren't which would mean something in
> > pcpu_mem_alloc() needs changing...
>
> They aren't but percpu allocator doesn't call them with interrupts
> disabled normally. It only happens during early boot before it's
> enabled for the first time but this is an allowed exception. We'll
> probably need to update the WARN_ON to consider the rare call path.
> It also looks like something in that path is turning off/on IRQ
> instead of saving/restoring it, so that probably needs to be changed
> too but both aren't really critical.
>
> I think the real problem is a lot of unsigned int percpu allocations
> added by 6c9ae009 (irq: use per_cpu kstat_irqs). percpu allocator
> should be able to cope but it assumes that it would always be able to
> allocate contiguous allocation map using vmalloc and that might be
> failing, although I cannot readily see how or why that would happen
> frequently on a 64bit machine.
Btw., based on Peter's suggestion i tried the limit-bumping hack below - but it did
not help, the crash still triggers on 5%-10% of all randconfig bootups.
Thanks,
Ingo
>From e2c013d28c8fe81cd30976dcd3058cc86c6285d3 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 19 Jan 2011 20:15:20 +0100
Subject: [PATCH] <not for upstream> percpu: Increase allocation limits
Might solve the boot crashes ...
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
mm/percpu.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/mm/percpu.c b/mm/percpu.c
index 3f93001..5cd9cf4 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -74,7 +74,7 @@
#include <asm/io.h>
#define PCPU_SLOT_BASE_SHIFT 5 /* 1-31 shares the same slot */
-#define PCPU_DFL_MAP_ALLOC 16 /* start a map with 16 ents */
+#define PCPU_DFL_MAP_ALLOC 64 /* start a map with 64 ents */
#ifdef CONFIG_SMP
/* default addr <-> pcpu_ptr mapping, override in asm/percpu.h if necessary */
^ permalink raw reply related [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1
2011-01-18 23:54 Linux 2.6.38-rc1 Linus Torvalds
` (3 preceding siblings ...)
2011-01-19 12:02 ` percpu related boot crash on x86 (was: Linux 2.6.38-rc1) Ingo Molnar
@ 2011-01-19 21:40 ` Alan Cox
2011-01-21 15:30 ` Aaro Koskinen
4 siblings, 1 reply; 69+ messages in thread
From: Alan Cox @ 2011-01-19 21:40 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Linux Kernel Mailing List
> And as usual, report any regressions to the lists and the appropriate
> authorities.
Its actually looking pretty good (as is -next from it). The -next one
I've been beating up pretty hard today rescuing a box with a drive fail.
The i915 driver is busted on my main box but the underlying breakage seems
older so for the moment I'm cautious of treating it as a recent
regression as 2.6.32 is the newest that seems totally reliable of
2.6.32/5/7/8rc1
Only oddity is the kmemleak report is reporting a few possible leaks and
suggesting I look in the sysfs file .. which isn't there ???
Alan
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: percpu related boot crash on x86 (was: Linux 2.6.38-rc1)
2011-01-19 20:53 ` Ingo Molnar
@ 2011-01-19 23:11 ` Ingo Molnar
2011-01-20 8:31 ` percpu related boot crash on x86 Pekka Enberg
0 siblings, 1 reply; 69+ messages in thread
From: Ingo Molnar @ 2011-01-19 23:11 UTC (permalink / raw)
To: Tejun Heo
Cc: Pekka Enberg, Peter Zijlstra, Linus Torvalds,
Linux Kernel Mailing List, Thomas Gleixner, H. Peter Anvin,
Andrew Morton, Pekka Enberg
* Ingo Molnar <mingo@elte.hu> wrote:
> Btw., based on Peter's suggestion i tried the limit-bumping hack below - but it
> did not help, the crash still triggers on 5%-10% of all randconfig bootups.
I'm now running tests with MAXSMP forcibly disabled - and there are no crashes after
69 randconfig iteration. Before it would crash within 10 iterations.
So it seems the MAXSMP sizing tests triggers a new percpu regression.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1 doesn't boot
2011-01-19 9:09 ` Ingo Molnar
@ 2011-01-20 2:08 ` Shaohua Li
2011-01-20 3:32 ` Lu, Hongjiu
2011-01-20 11:25 ` Ingo Molnar
0 siblings, 2 replies; 69+ messages in thread
From: Shaohua Li @ 2011-01-20 2:08 UTC (permalink / raw)
To: Ingo Molnar
Cc: Anvin, H Peter, Markus Trippelsdorf, Lu, Hongjiu, Linus Torvalds,
Linux Kernel Mailing List, Sam Ravnborg
On Wed, 2011-01-19 at 17:09 +0800, Ingo Molnar wrote:
> * H. Peter Anvin <h.peter.anvin@intel.com> wrote:
>
> > On 01/19/2011 12:12 AM, Shaohua Li wrote:
> > > On Wed, 2011-01-19 at 15:49 +0800, Markus Trippelsdorf wrote:
> > >> On 2011.01.19 at 08:39 +0100, Markus Trippelsdorf wrote:
> > >>> On 2011.01.18 at 15:54 -0800, Linus Torvalds wrote:
> > >>>>
> > >>>> And as usual, report any regressions to the lists and the appropriate
> > >>>> authorities.
> > >>>
> > >>> Unfortunately 2.6.38-rc1 doesn't even boot on my machine (amd64).
> > >>> This is caused by 86b1e8dd83cbb0f:
> > >>> x86: Make relocatable kernel work with new binutils
> > >>>
> > >>> Reverting the commit solves the problem.
> > >>
> > >> I'm running the latest binutils:
> > >> GNU ld (Linux/GNU Binutils) 2.21.51.0.5.20110104
> > > Hmm, reproduce it here with binutils-2.21.51.0.6-20110118
> > > but not with GNU ld (GNU Binutils for Ubuntu) 2.20.51-system.20100908
> > > I got this in system.map: ffffffff03514880 D jiffies_64, which looks
> > > wrong.
> > > looks binutils changed something again.
> > > Have no idea, CC Lu Hongjiu.
> > >
> >
> > Either way... the whole jiffies vs jiffies_64 thing is kind of
> > ridiculous. We should be able to do it in a completely
> > architecture-generic way by either making it a union(!) (with "jiffies"
> > and "jiffies_64" presumably would be #defines, or we do a global replace
> > across the tree), moving the variable declaration itself to a .S file
> > (which would only have data components and therefore would be
> > arch-generic) or doing something like the attached (untested since it is
> > 1 am here) patch.
> >
> > This should let us get rid of the hacks in *all* the architectures, not
> > just x86.
>
> Ok - until it's resolved i'll queue up a revert - a known build failure is preferred
> to a boot regression.
it's not a build failure, without it, my i386 kernel can't boot
actually.
Thanks,
Shaohua
^ permalink raw reply [flat|nested] 69+ messages in thread
* RE: Linux 2.6.38-rc1 doesn't boot
2011-01-20 2:08 ` Shaohua Li
@ 2011-01-20 3:32 ` Lu, Hongjiu
2011-01-20 11:25 ` Ingo Molnar
1 sibling, 0 replies; 69+ messages in thread
From: Lu, Hongjiu @ 2011-01-20 3:32 UTC (permalink / raw)
To: Li, Shaohua, Ingo Molnar
Cc: Anvin, H Peter, Markus Trippelsdorf, Linus Torvalds,
Linux Kernel Mailing List, Sam Ravnborg
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 2278 bytes --]
>
> On Wed, 2011-01-19 at 17:09 +0800, Ingo Molnar wrote:
> > * H. Peter Anvin <h.peter.anvin@intel.com> wrote:
> >
> > > On 01/19/2011 12:12 AM, Shaohua Li wrote:
> > > > On Wed, 2011-01-19 at 15:49 +0800, Markus Trippelsdorf wrote:
> > > >> On 2011.01.19 at 08:39 +0100, Markus Trippelsdorf wrote:
> > > >>> On 2011.01.18 at 15:54 -0800, Linus Torvalds wrote:
> > > >>>>
> > > >>>> And as usual, report any regressions to the lists and the
> appropriate
> > > >>>> authorities.
> > > >>>
> > > >>> Unfortunately 2.6.38-rc1 doesn't even boot on my machine
> (amd64).
> > > >>> This is caused by 86b1e8dd83cbb0f:
> > > >>> x86: Make relocatable kernel work with new binutils
> > > >>>
> > > >>> Reverting the commit solves the problem.
> > > >>
> > > >> I'm running the latest binutils:
> > > >> GNU ld (Linux/GNU Binutils) 2.21.51.0.5.20110104
> > > > Hmm, reproduce it here with binutils-2.21.51.0.6-20110118
> > > > but not with GNU ld (GNU Binutils for Ubuntu) 2.20.51-
> system.20100908
> > > > I got this in system.map: ffffffff03514880 D jiffies_64, which
> looks
> > > > wrong.
> > > > looks binutils changed something again.
> > > > Have no idea, CC Lu Hongjiu.
> > > >
> > >
> > > Either way... the whole jiffies vs jiffies_64 thing is kind of
> > > ridiculous. We should be able to do it in a completely
> > > architecture-generic way by either making it a union(!) (with
> "jiffies"
> > > and "jiffies_64" presumably would be #defines, or we do a global
> replace
> > > across the tree), moving the variable declaration itself to a .S
> file
> > > (which would only have data components and therefore would be
> > > arch-generic) or doing something like the attached (untested since
> it is
> > > 1 am here) patch.
> > >
> > > This should let us get rid of the hacks in *all* the architectures,
> not
> > > just x86.
> >
> > Ok - until it's resolved i'll queue up a revert - a known build
> failure is preferred
> > to a boot regression.
> it's not a build failure, without it, my i386 kernel can't boot
> actually.
Kernel build script should check known broken linkers
and refuse to use it.
H.J.
ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1 doesn't boot
2011-01-19 7:49 ` Markus Trippelsdorf
2011-01-19 8:12 ` Shaohua Li
@ 2011-01-20 4:59 ` Alexandre Courbot
1 sibling, 0 replies; 69+ messages in thread
From: Alexandre Courbot @ 2011-01-20 4:59 UTC (permalink / raw)
To: Markus Trippelsdorf
Cc: Linus Torvalds, Linux Kernel Mailing List, Shaohua Li,
Ingo Molnar, Sam Ravnborg
>> Unfortunately 2.6.38-rc1 doesn't even boot on my machine (amd64).
>> This is caused by 86b1e8dd83cbb0f:
>> x86: Make relocatable kernel work with new binutils
>>
>> Reverting the commit solves the problem.
>
> I'm running the latest binutils:
> GNU ld (Linux/GNU Binutils) 2.21.51.0.5.20110104
Same thing here on x86_64 with Binutils 2.21.0.20101217. Boot stops
after "Booting the kernel" message, regardless of whether
CONFIG_RELOCATABLE is set or not.
System.map has
ffffffff02c92880 D jiffies_64
Reverting the patch also solved the problem for me.
Alex.
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: percpu related boot crash on x86
2011-01-19 23:11 ` Ingo Molnar
@ 2011-01-20 8:31 ` Pekka Enberg
2011-01-20 10:47 ` Peter Zijlstra
0 siblings, 1 reply; 69+ messages in thread
From: Pekka Enberg @ 2011-01-20 8:31 UTC (permalink / raw)
To: Ingo Molnar
Cc: Tejun Heo, Pekka Enberg, Peter Zijlstra, Linus Torvalds,
Linux Kernel Mailing List, Thomas Gleixner, H. Peter Anvin,
Andrew Morton
On 1/20/11 1:11 AM, Ingo Molnar wrote:
>
> * Ingo Molnar<mingo@elte.hu> wrote:
>
>> Btw., based on Peter's suggestion i tried the limit-bumping hack below - but it
>> did not help, the crash still triggers on 5%-10% of all randconfig bootups.
>
> I'm now running tests with MAXSMP forcibly disabled - and there are no crashes after
> 69 randconfig iteration. Before it would crash within 10 iterations.
>
> So it seems the MAXSMP sizing tests triggers a new percpu regression.
It needs CONFIG_DEBUG_PAGEALLOC to trigger. As the comment in
vmap_debug_free_range() already says "it's going to be slow" I wonder if
we could just hack around the problem by adding a
if (!irqs_disabled())
guard around the debugging code to make vfree() always work with IRQs
disabled.
Pekka
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: percpu related boot crash on x86
2011-01-20 8:31 ` percpu related boot crash on x86 Pekka Enberg
@ 2011-01-20 10:47 ` Peter Zijlstra
2011-01-20 11:12 ` Eric Dumazet
0 siblings, 1 reply; 69+ messages in thread
From: Peter Zijlstra @ 2011-01-20 10:47 UTC (permalink / raw)
To: Pekka Enberg
Cc: Ingo Molnar, Tejun Heo, Linus Torvalds,
Linux Kernel Mailing List, Thomas Gleixner, H. Peter Anvin,
Andrew Morton
On Thu, 2011-01-20 at 10:31 +0200, Pekka Enberg wrote:
> if (!irqs_disabled())
>
> guard around the debugging code to make vfree() always work with IRQs
> disabled.
That won't be sufficient, __purge_vmap_area_lazy() needs to call
flush_tlb_kernel_range() occasionally.
There really is a good reason vmalloc()/vfree() don't work with
interrupts disabled.
^ permalink raw reply [flat|nested] 69+ messages in thread
* [PATCH 1/2] lockdep: move early boot local IRQ enable/disable status to init/main.c
2011-01-19 12:02 ` percpu related boot crash on x86 (was: Linux 2.6.38-rc1) Ingo Molnar
2011-01-19 12:44 ` Tejun Heo
2011-01-19 12:48 ` Peter Zijlstra
@ 2011-01-20 11:06 ` Tejun Heo
2011-01-20 11:07 ` [PATCH 2/2] smp: allow on_each_cpu() to be called while early_boot_irqs_disabled " Tejun Heo
` (3 more replies)
2 siblings, 4 replies; 69+ messages in thread
From: Tejun Heo @ 2011-01-20 11:06 UTC (permalink / raw)
To: Ingo Molnar
Cc: Linus Torvalds, Linux Kernel Mailing List, Thomas Gleixner,
H. Peter Anvin, Peter Zijlstra, Andrew Morton, Pekka Enberg
During early boot, local IRQ is disabled until IRQ subsystem is
properly initialized. During this time, no one should enable local
IRQ and some operations which usually are not allowed with IRQ
disabled, e.g. operations which might sleep or require communications
with other processors, are allowed.
lockdep tracked this with early_boot_irqs_off/on() callbacks. As
other subsystems need this information too, move it to init/main.c and
make it generally available. While at it, toggle the boolean to
early_boot_irqs_disabled instead of enabled so that it can be
initialized with %false and %true indicates the exceptional condition.
Signed-off-by: Tejun Heo <tj@kernel.org>
---
include/linux/kernel.h | 2 ++
init/main.c | 13 +++++++++++--
kernel/lockdep.c | 18 +-----------------
3 files changed, 14 insertions(+), 19 deletions(-)
Index: work/include/linux/kernel.h
===================================================================
--- work.orig/include/linux/kernel.h
+++ work/include/linux/kernel.h
@@ -243,6 +243,8 @@ extern int test_taint(unsigned flag);
extern unsigned long get_taint(void);
extern int root_mountflags;
+extern bool early_boot_irqs_disabled;
+
/* Values used for system_state */
extern enum system_states {
SYSTEM_BOOTING,
Index: work/init/main.c
===================================================================
--- work.orig/init/main.c
+++ work/init/main.c
@@ -96,6 +96,15 @@ static inline void mark_rodata_ro(void)
extern void tc_init(void);
#endif
+/*
+ * Debug helper: via this flag we know that we are in 'early bootup code'
+ * where only the boot processor is running with IRQ disabled. This means
+ * two things - IRQ must not be enabled before the flag is cleared and some
+ * operations which are not allowed with IRQ disabled are allowed while the
+ * flag is set.
+ */
+bool early_boot_irqs_disabled __read_mostly;
+
enum system_states system_state __read_mostly;
EXPORT_SYMBOL(system_state);
@@ -554,7 +563,7 @@ asmlinkage void __init start_kernel(void
cgroup_init_early();
local_irq_disable();
- early_boot_irqs_off();
+ early_boot_irqs_disabled = true;
/*
* Interrupts are still disabled. Do necessary setups, then
@@ -621,7 +630,7 @@ asmlinkage void __init start_kernel(void
if (!irqs_disabled())
printk(KERN_CRIT "start_kernel(): bug: interrupts were "
"enabled early\n");
- early_boot_irqs_on();
+ early_boot_irqs_disabled = false;
local_irq_enable();
/* Interrupts are enabled now so all GFP allocations are safe. */
Index: work/kernel/lockdep.c
===================================================================
--- work.orig/kernel/lockdep.c
+++ work/kernel/lockdep.c
@@ -2292,22 +2292,6 @@ mark_held_locks(struct task_struct *curr
}
/*
- * Debugging helper: via this flag we know that we are in
- * 'early bootup code', and will warn about any invalid irqs-on event:
- */
-static int early_boot_irqs_enabled;
-
-void early_boot_irqs_off(void)
-{
- early_boot_irqs_enabled = 0;
-}
-
-void early_boot_irqs_on(void)
-{
- early_boot_irqs_enabled = 1;
-}
-
-/*
* Hardirqs will be enabled:
*/
void trace_hardirqs_on_caller(unsigned long ip)
@@ -2319,7 +2303,7 @@ void trace_hardirqs_on_caller(unsigned l
if (unlikely(!debug_locks || current->lockdep_recursion))
return;
- if (DEBUG_LOCKS_WARN_ON(unlikely(!early_boot_irqs_enabled)))
+ if (DEBUG_LOCKS_WARN_ON(unlikely(early_boot_irqs_disabled)))
return;
if (unlikely(curr->hardirqs_enabled)) {
^ permalink raw reply [flat|nested] 69+ messages in thread
* [PATCH 2/2] smp: allow on_each_cpu() to be called while early_boot_irqs_disabled status to init/main.c
2011-01-20 11:06 ` [PATCH 1/2] lockdep: move early boot local IRQ enable/disable status to init/main.c Tejun Heo
@ 2011-01-20 11:07 ` Tejun Heo
2011-01-20 20:22 ` [tip:core/urgent] smp: Allow " tip-bot for Tejun Heo
2011-01-20 11:11 ` [PATCH 1/2] lockdep: move early boot local IRQ enable/disable " Tejun Heo
` (2 subsequent siblings)
3 siblings, 1 reply; 69+ messages in thread
From: Tejun Heo @ 2011-01-20 11:07 UTC (permalink / raw)
To: Ingo Molnar
Cc: Linus Torvalds, Linux Kernel Mailing List, Thomas Gleixner,
H. Peter Anvin, Peter Zijlstra, Andrew Morton, Pekka Enberg
percpu may end up calling vfree() during early boot which in turn may
call on_each_cpu() for TLB flushes. The function of on_each_cpu() can
be done safely while IRQ is disabled during early boot but it assumed
that the function is always called with local IRQ enabled which ended
up enabling local IRQ prematurely during boot and triggering a couple
of warnings.
This patch updates on_each_cpu() and smp_call_function_many() such
on_each_cpu() can be used safely while early_boot_irqs_disabled is
set.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
---
kernel/smp.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
Index: work/kernel/smp.c
===================================================================
--- work.orig/kernel/smp.c
+++ work/kernel/smp.c
@@ -430,7 +430,7 @@ void smp_call_function_many(const struct
* can't happen.
*/
WARN_ON_ONCE(cpu_online(this_cpu) && irqs_disabled()
- && !oops_in_progress);
+ && !oops_in_progress && !early_boot_irqs_disabled);
/* So, what's a CPU they want? Ignoring this one. */
cpu = cpumask_first_and(mask, cpu_online_mask);
@@ -533,17 +533,20 @@ void ipi_call_unlock_irq(void)
#endif /* USE_GENERIC_SMP_HELPERS */
/*
- * Call a function on all processors
+ * Call a function on all processors. May be used during early boot while
+ * early_boot_irqs_disabled is set. Use local_irq_save/restore() instead
+ * of local_irq_disable/enable().
*/
int on_each_cpu(void (*func) (void *info), void *info, int wait)
{
+ unsigned long flags;
int ret = 0;
preempt_disable();
ret = smp_call_function(func, info, wait);
- local_irq_disable();
+ local_irq_save(flags);
func(info);
- local_irq_enable();
+ local_irq_restore(flags);
preempt_enable();
return ret;
}
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: [PATCH 1/2] lockdep: move early boot local IRQ enable/disable status to init/main.c
2011-01-20 11:06 ` [PATCH 1/2] lockdep: move early boot local IRQ enable/disable status to init/main.c Tejun Heo
2011-01-20 11:07 ` [PATCH 2/2] smp: allow on_each_cpu() to be called while early_boot_irqs_disabled " Tejun Heo
@ 2011-01-20 11:11 ` Tejun Heo
2011-01-20 11:23 ` Peter Zijlstra
2011-01-20 12:00 ` Ingo Molnar
2011-01-20 11:51 ` [PATCH " Ingo Molnar
2011-01-20 20:21 ` [tip:core/urgent] lockdep: Move " tip-bot for Tejun Heo
3 siblings, 2 replies; 69+ messages in thread
From: Tejun Heo @ 2011-01-20 11:11 UTC (permalink / raw)
To: Ingo Molnar
Cc: Linus Torvalds, Linux Kernel Mailing List, Thomas Gleixner,
H. Peter Anvin, Peter Zijlstra, Andrew Morton, Pekka Enberg
Hello, guys.
These two patches remove both warnings. The first warning was
completely spurious. The second lockdep one was triggered by
on_each_cpu() enabling local IRQ too early.
I don't think percpu allocator itself malfunctioned. There was no
allocation failure. It whines when percpu allocation fails but didn't
in the log. Other than calling vfree() early triggering the above
condition, it worked okay.
So, it's either the early enabling of local IRQ by on_each_cpu()
breaking something in the IRQ subsystem or something different. Ingo,
can you please see whether these two patches cure the panic too?
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: percpu related boot crash on x86
2011-01-20 10:47 ` Peter Zijlstra
@ 2011-01-20 11:12 ` Eric Dumazet
2011-01-20 11:19 ` Tejun Heo
0 siblings, 1 reply; 69+ messages in thread
From: Eric Dumazet @ 2011-01-20 11:12 UTC (permalink / raw)
To: Peter Zijlstra
Cc: Pekka Enberg, Ingo Molnar, Tejun Heo, Linus Torvalds,
Linux Kernel Mailing List, Thomas Gleixner, H. Peter Anvin,
Andrew Morton
Le jeudi 20 janvier 2011 à 11:47 +0100, Peter Zijlstra a écrit :
> On Thu, 2011-01-20 at 10:31 +0200, Pekka Enberg wrote:
> > if (!irqs_disabled())
> >
> > guard around the debugging code to make vfree() always work with IRQs
> > disabled.
>
> That won't be sufficient, __purge_vmap_area_lazy() needs to call
> flush_tlb_kernel_range() occasionally.
>
> There really is a good reason vmalloc()/vfree() don't work with
> interrupts disabled.
>
Hmm, I would try to increase PERCPU_DYNAMIC_RESERVE, or pcpu_mem_alloc()
could try to use kzalloc() even for allocations bigger than one PAGE,
and fallback to vzalloc().
We have more alloc_percpu() uses, we also should try to use first chunk
if possible.
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: percpu related boot crash on x86
2011-01-20 11:12 ` Eric Dumazet
@ 2011-01-20 11:19 ` Tejun Heo
0 siblings, 0 replies; 69+ messages in thread
From: Tejun Heo @ 2011-01-20 11:19 UTC (permalink / raw)
To: Eric Dumazet
Cc: Peter Zijlstra, Pekka Enberg, Ingo Molnar, Linus Torvalds,
Linux Kernel Mailing List, Thomas Gleixner, H. Peter Anvin,
Andrew Morton
Hello,
On Thu, Jan 20, 2011 at 12:12:47PM +0100, Eric Dumazet wrote:
> Le jeudi 20 janvier 2011 à 11:47 +0100, Peter Zijlstra a écrit :
> > On Thu, 2011-01-20 at 10:31 +0200, Pekka Enberg wrote:
> > > if (!irqs_disabled())
> > >
> > > guard around the debugging code to make vfree() always work with IRQs
> > > disabled.
> >
> > That won't be sufficient, __purge_vmap_area_lazy() needs to call
> > flush_tlb_kernel_range() occasionally.
> >
> > There really is a good reason vmalloc()/vfree() don't work with
> > interrupts disabled.
>
> Hmm, I would try to increase PERCPU_DYNAMIC_RESERVE, or pcpu_mem_alloc()
> could try to use kzalloc() even for allocations bigger than one PAGE,
> and fallback to vzalloc().
It already handles all those stuff. As I wrote in the other message,
I don't think this problem has much to do with percpu allocator
itself.
> We have more alloc_percpu() uses, we also should try to use first chunk
> if possible.
Yeah, but that's true. It's probably too small at this point. Maybe
there should be a way to monitor percpu memory status, a proc entry or
something so that we can have more data on sizing.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: [PATCH 1/2] lockdep: move early boot local IRQ enable/disable status to init/main.c
2011-01-20 11:11 ` [PATCH 1/2] lockdep: move early boot local IRQ enable/disable " Tejun Heo
@ 2011-01-20 11:23 ` Peter Zijlstra
2011-01-20 11:26 ` Tejun Heo
2011-01-20 12:00 ` Ingo Molnar
1 sibling, 1 reply; 69+ messages in thread
From: Peter Zijlstra @ 2011-01-20 11:23 UTC (permalink / raw)
To: Tejun Heo
Cc: Ingo Molnar, Linus Torvalds, Linux Kernel Mailing List,
Thomas Gleixner, H. Peter Anvin, Andrew Morton, Pekka Enberg
On Thu, 2011-01-20 at 12:11 +0100, Tejun Heo wrote:
> Hello, guys.
>
> These two patches remove both warnings. The first warning was
> completely spurious. The second lockdep one was triggered by
> on_each_cpu() enabling local IRQ too early.
>
> I don't think percpu allocator itself malfunctioned. There was no
> allocation failure. It whines when percpu allocation fails but didn't
> in the log. Other than calling vfree() early triggering the above
> condition, it worked okay.
>
> So, it's either the early enabling of local IRQ by on_each_cpu()
> breaking something in the IRQ subsystem or something different. Ingo,
> can you please see whether these two patches cure the panic too?
Why not use something like: system_state != SYSTEM_RUNNING ?
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1 doesn't boot
2011-01-20 2:08 ` Shaohua Li
2011-01-20 3:32 ` Lu, Hongjiu
@ 2011-01-20 11:25 ` Ingo Molnar
2011-01-20 15:08 ` Anvin, H Peter
1 sibling, 1 reply; 69+ messages in thread
From: Ingo Molnar @ 2011-01-20 11:25 UTC (permalink / raw)
To: Shaohua Li
Cc: Anvin, H Peter, Markus Trippelsdorf, Lu, Hongjiu, Linus Torvalds,
Linux Kernel Mailing List, Sam Ravnborg
* Shaohua Li <shaohua.li@intel.com> wrote:
> it's not a build failure, without it, my i386 kernel can't boot
> actually.
Please try hpa's patch in this thread on top of very latest (today's) -git or latest
-tip:
http://people.redhat.com/mingo/tip.git/README
Does that result in a booting system? That way we can avoid most of the linker
script madness.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: [PATCH 1/2] lockdep: move early boot local IRQ enable/disable status to init/main.c
2011-01-20 11:23 ` Peter Zijlstra
@ 2011-01-20 11:26 ` Tejun Heo
2011-01-20 11:30 ` Pekka Enberg
2011-01-20 11:38 ` Peter Zijlstra
0 siblings, 2 replies; 69+ messages in thread
From: Tejun Heo @ 2011-01-20 11:26 UTC (permalink / raw)
To: Peter Zijlstra
Cc: Ingo Molnar, Linus Torvalds, Linux Kernel Mailing List,
Thomas Gleixner, H. Peter Anvin, Andrew Morton, Pekka Enberg
On Thu, Jan 20, 2011 at 12:23:51PM +0100, Peter Zijlstra wrote:
> On Thu, 2011-01-20 at 12:11 +0100, Tejun Heo wrote:
> > Hello, guys.
> >
> > These two patches remove both warnings. The first warning was
> > completely spurious. The second lockdep one was triggered by
> > on_each_cpu() enabling local IRQ too early.
> >
> > I don't think percpu allocator itself malfunctioned. There was no
> > allocation failure. It whines when percpu allocation fails but didn't
> > in the log. Other than calling vfree() early triggering the above
> > condition, it worked okay.
> >
> > So, it's either the early enabling of local IRQ by on_each_cpu()
> > breaking something in the IRQ subsystem or something different. Ingo,
> > can you please see whether these two patches cure the panic too?
>
> Why not use something like: system_state != SYSTEM_RUNNING ?
Cuz, it's finer grained than that. We can add a SYSTEM_* flag but I
wasn't sure whether that would be just creating more noise. If we try
to consolidate these things, we probably should consider
oops_in_progress too. It probably is a good idea but let's first fix
the problem at hand.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: [PATCH 1/2] lockdep: move early boot local IRQ enable/disable status to init/main.c
2011-01-20 11:26 ` Tejun Heo
@ 2011-01-20 11:30 ` Pekka Enberg
2011-01-20 11:38 ` Peter Zijlstra
1 sibling, 0 replies; 69+ messages in thread
From: Pekka Enberg @ 2011-01-20 11:30 UTC (permalink / raw)
To: Tejun Heo
Cc: Peter Zijlstra, Ingo Molnar, Linus Torvalds,
Linux Kernel Mailing List, Thomas Gleixner, H. Peter Anvin,
Andrew Morton, Pekka Enberg
> On Thu, Jan 20, 2011 at 12:23:51PM +0100, Peter Zijlstra wrote:
>> On Thu, 2011-01-20 at 12:11 +0100, Tejun Heo wrote:
>> > Hello, guys.
>> >
>> > These two patches remove both warnings. The first warning was
>> > completely spurious. The second lockdep one was triggered by
>> > on_each_cpu() enabling local IRQ too early.
>> >
>> > I don't think percpu allocator itself malfunctioned. There was no
>> > allocation failure. It whines when percpu allocation fails but didn't
>> > in the log. Other than calling vfree() early triggering the above
>> > condition, it worked okay.
>> >
>> > So, it's either the early enabling of local IRQ by on_each_cpu()
>> > breaking something in the IRQ subsystem or something different. Ingo,
>> > can you please see whether these two patches cure the panic too?
>>
>> Why not use something like: system_state != SYSTEM_RUNNING ?
On Thu, Jan 20, 2011 at 1:26 PM, Tejun Heo <tj@kernel.org> wrote:
> Cuz, it's finer grained than that. We can add a SYSTEM_* flag but I
> wasn't sure whether that would be just creating more noise. If we try
> to consolidate these things, we probably should consider
> oops_in_progress too. It probably is a good idea but let's first fix
> the problem at hand.
Yup, SYSTEM_RUNNING happens much later in the boot sequence so we
don't want to use it here. We had a long discussion about system_state
when we introduced gfp_allowed_mask and IIRC people wanted to avoid
more system_state flags and preferred more explicit ones like
early_boot_irqs_disabled.
We can do more cleanups later but for the problem at hand:
Acked-by: Pekka Enberg <penberg@kernel.org>
for both patches.
Pekka
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: [PATCH 1/2] lockdep: move early boot local IRQ enable/disable status to init/main.c
2011-01-20 11:26 ` Tejun Heo
2011-01-20 11:30 ` Pekka Enberg
@ 2011-01-20 11:38 ` Peter Zijlstra
1 sibling, 0 replies; 69+ messages in thread
From: Peter Zijlstra @ 2011-01-20 11:38 UTC (permalink / raw)
To: Tejun Heo
Cc: Ingo Molnar, Linus Torvalds, Linux Kernel Mailing List,
Thomas Gleixner, H. Peter Anvin, Andrew Morton, Pekka Enberg
On Thu, 2011-01-20 at 12:26 +0100, Tejun Heo wrote:
> On Thu, Jan 20, 2011 at 12:23:51PM +0100, Peter Zijlstra wrote:
> > On Thu, 2011-01-20 at 12:11 +0100, Tejun Heo wrote:
> > > Hello, guys.
> > >
> > > These two patches remove both warnings. The first warning was
> > > completely spurious. The second lockdep one was triggered by
> > > on_each_cpu() enabling local IRQ too early.
> > >
> > > I don't think percpu allocator itself malfunctioned. There was no
> > > allocation failure. It whines when percpu allocation fails but didn't
> > > in the log. Other than calling vfree() early triggering the above
> > > condition, it worked okay.
> > >
> > > So, it's either the early enabling of local IRQ by on_each_cpu()
> > > breaking something in the IRQ subsystem or something different. Ingo,
> > > can you please see whether these two patches cure the panic too?
> >
> > Why not use something like: system_state != SYSTEM_RUNNING ?
>
> Cuz, it's finer grained than that. We can add a SYSTEM_* flag but I
> wasn't sure whether that would be just creating more noise. If we try
> to consolidate these things, we probably should consider
> oops_in_progress too. It probably is a good idea but let's first fix
> the problem at hand.
Right, no problem with that, I was just wondering why you'd add an extra
variable instead of using the system states.
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: [PATCH 1/2] lockdep: move early boot local IRQ enable/disable status to init/main.c
2011-01-20 11:06 ` [PATCH 1/2] lockdep: move early boot local IRQ enable/disable status to init/main.c Tejun Heo
2011-01-20 11:07 ` [PATCH 2/2] smp: allow on_each_cpu() to be called while early_boot_irqs_disabled " Tejun Heo
2011-01-20 11:11 ` [PATCH 1/2] lockdep: move early boot local IRQ enable/disable " Tejun Heo
@ 2011-01-20 11:51 ` Ingo Molnar
2011-01-20 20:21 ` [tip:core/urgent] lockdep: Move " tip-bot for Tejun Heo
3 siblings, 0 replies; 69+ messages in thread
From: Ingo Molnar @ 2011-01-20 11:51 UTC (permalink / raw)
To: Tejun Heo
Cc: Linus Torvalds, Linux Kernel Mailing List, Thomas Gleixner,
H. Peter Anvin, Peter Zijlstra, Andrew Morton, Pekka Enberg
this patch causes an allmod64 build failure:
(.init.text+0x741): undefined reference to `early_boot_irqs_off'
Thanks,
Ingo
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: [PATCH 1/2] lockdep: move early boot local IRQ enable/disable status to init/main.c
2011-01-20 11:11 ` [PATCH 1/2] lockdep: move early boot local IRQ enable/disable " Tejun Heo
2011-01-20 11:23 ` Peter Zijlstra
@ 2011-01-20 12:00 ` Ingo Molnar
2011-01-20 12:20 ` [PATCH UPDATED " Tejun Heo
1 sibling, 1 reply; 69+ messages in thread
From: Ingo Molnar @ 2011-01-20 12:00 UTC (permalink / raw)
To: Tejun Heo
Cc: Linus Torvalds, Linux Kernel Mailing List, Thomas Gleixner,
H. Peter Anvin, Peter Zijlstra, Andrew Morton, Pekka Enberg
* Tejun Heo <tj@kernel.org> wrote:
> So, it's either the early enabling of local IRQ by on_each_cpu()
> breaking something in the IRQ subsystem or something different. Ingo,
> can you please see whether these two patches cure the panic too?
They seem to help with the MAXSMP config that crashed yesterday.
I'll be able to do more testing and see whether the bug is really fixed once the
modular kernel build failure is fixed.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 69+ messages in thread
* [PATCH UPDATED 1/2] lockdep: move early boot local IRQ enable/disable status to init/main.c
2011-01-20 12:00 ` Ingo Molnar
@ 2011-01-20 12:20 ` Tejun Heo
0 siblings, 0 replies; 69+ messages in thread
From: Tejun Heo @ 2011-01-20 12:20 UTC (permalink / raw)
To: Ingo Molnar
Cc: Linus Torvalds, Linux Kernel Mailing List, Thomas Gleixner,
H. Peter Anvin, Peter Zijlstra, Andrew Morton, Pekka Enberg
During early boot, local IRQ is disabled until IRQ subsystem is
properly initialized. During this time, no one should enable local
IRQ and some operations which usually are not allowed with IRQ
disabled, e.g. operations which might sleep or require communications
with other processors, are allowed.
lockdep tracked this with early_boot_irqs_off/on() callbacks. As
other subsystems need this information too, move it to init/main.c and
make it generally available. While at it, toggle the boolean to
early_boot_irqs_disabled instead of enabled so that it can be
initialized with %false and %true indicates the exceptional condition.
* The original patch missed conversions of several users causing build
failures. Updated.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
On Thu, Jan 20, 2011 at 01:00:01PM +0100, Ingo Molnar wrote:
> I'll be able to do more testing and see whether the bug is really
> fixed once the modular kernel build failure is fixed.
Sorry about that. Here's the updated patch. The second one doesn't
need to be changed.
Thanks.
arch/x86/xen/enlighten.c | 2 +-
include/linux/kernel.h | 2 ++
include/linux/lockdep.h | 8 --------
init/main.c | 13 +++++++++++--
kernel/lockdep.c | 18 +-----------------
kernel/trace/trace_irqsoff.c | 8 --------
6 files changed, 15 insertions(+), 36 deletions(-)
Index: work/include/linux/kernel.h
===================================================================
--- work.orig/include/linux/kernel.h
+++ work/include/linux/kernel.h
@@ -243,6 +243,8 @@ extern int test_taint(unsigned flag);
extern unsigned long get_taint(void);
extern int root_mountflags;
+extern bool early_boot_irqs_disabled;
+
/* Values used for system_state */
extern enum system_states {
SYSTEM_BOOTING,
Index: work/init/main.c
===================================================================
--- work.orig/init/main.c
+++ work/init/main.c
@@ -96,6 +96,15 @@ static inline void mark_rodata_ro(void)
extern void tc_init(void);
#endif
+/*
+ * Debug helper: via this flag we know that we are in 'early bootup code'
+ * where only the boot processor is running with IRQ disabled. This means
+ * two things - IRQ must not be enabled before the flag is cleared and some
+ * operations which are not allowed with IRQ disabled are allowed while the
+ * flag is set.
+ */
+bool early_boot_irqs_disabled __read_mostly;
+
enum system_states system_state __read_mostly;
EXPORT_SYMBOL(system_state);
@@ -554,7 +563,7 @@ asmlinkage void __init start_kernel(void
cgroup_init_early();
local_irq_disable();
- early_boot_irqs_off();
+ early_boot_irqs_disabled = true;
/*
* Interrupts are still disabled. Do necessary setups, then
@@ -621,7 +630,7 @@ asmlinkage void __init start_kernel(void
if (!irqs_disabled())
printk(KERN_CRIT "start_kernel(): bug: interrupts were "
"enabled early\n");
- early_boot_irqs_on();
+ early_boot_irqs_disabled = false;
local_irq_enable();
/* Interrupts are enabled now so all GFP allocations are safe. */
Index: work/kernel/lockdep.c
===================================================================
--- work.orig/kernel/lockdep.c
+++ work/kernel/lockdep.c
@@ -2292,22 +2292,6 @@ mark_held_locks(struct task_struct *curr
}
/*
- * Debugging helper: via this flag we know that we are in
- * 'early bootup code', and will warn about any invalid irqs-on event:
- */
-static int early_boot_irqs_enabled;
-
-void early_boot_irqs_off(void)
-{
- early_boot_irqs_enabled = 0;
-}
-
-void early_boot_irqs_on(void)
-{
- early_boot_irqs_enabled = 1;
-}
-
-/*
* Hardirqs will be enabled:
*/
void trace_hardirqs_on_caller(unsigned long ip)
@@ -2319,7 +2303,7 @@ void trace_hardirqs_on_caller(unsigned l
if (unlikely(!debug_locks || current->lockdep_recursion))
return;
- if (DEBUG_LOCKS_WARN_ON(unlikely(!early_boot_irqs_enabled)))
+ if (DEBUG_LOCKS_WARN_ON(unlikely(early_boot_irqs_disabled)))
return;
if (unlikely(curr->hardirqs_enabled)) {
Index: work/arch/x86/xen/enlighten.c
===================================================================
--- work.orig/arch/x86/xen/enlighten.c
+++ work/arch/x86/xen/enlighten.c
@@ -1194,7 +1194,7 @@ asmlinkage void __init xen_start_kernel(
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
local_irq_disable();
- early_boot_irqs_off();
+ early_boot_irqs_disabled = true;
memblock_init();
Index: work/include/linux/lockdep.h
===================================================================
--- work.orig/include/linux/lockdep.h
+++ work/include/linux/lockdep.h
@@ -436,16 +436,8 @@ do { \
#endif /* CONFIG_LOCKDEP */
#ifdef CONFIG_TRACE_IRQFLAGS
-extern void early_boot_irqs_off(void);
-extern void early_boot_irqs_on(void);
extern void print_irqtrace_events(struct task_struct *curr);
#else
-static inline void early_boot_irqs_off(void)
-{
-}
-static inline void early_boot_irqs_on(void)
-{
-}
static inline void print_irqtrace_events(struct task_struct *curr)
{
}
Index: work/kernel/trace/trace_irqsoff.c
===================================================================
--- work.orig/kernel/trace/trace_irqsoff.c
+++ work/kernel/trace/trace_irqsoff.c
@@ -453,14 +453,6 @@ void time_hardirqs_off(unsigned long a0,
* Stubs:
*/
-void early_boot_irqs_off(void)
-{
-}
-
-void early_boot_irqs_on(void)
-{
-}
-
void trace_softirqs_on(unsigned long ip)
{
}
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: PPS parport boot lockup: INFO: HARDIRQ-READ-safe -> HARDIRQ-READ-unsafe lock order detected
2011-01-19 8:39 ` PPS parport boot lockup: INFO: HARDIRQ-READ-safe -> HARDIRQ-READ-unsafe lock order detected Ingo Molnar
@ 2011-01-20 13:04 ` Alexander Gordeev
2011-01-21 14:44 ` Alexander Gordeev
2011-01-24 15:12 ` [PATCH] parport: make lockdep happy with waitlist_lock Alexander Gordeev
2 siblings, 0 replies; 69+ messages in thread
From: Alexander Gordeev @ 2011-01-20 13:04 UTC (permalink / raw)
To: Ingo Molnar
Cc: Linus Torvalds, Andrew Morton, Linux Kernel Mailing List,
Thomas Gleixner
[-- Attachment #1: Type: text/plain, Size: 1045 bytes --]
В Wed, 19 Jan 2011 09:39:16 +0100
Ingo Molnar <mingo@elte.hu> пишет:
>
> .38-rc1 allyes64 bootup locks up soft, but first produces this lockdep splat:
>
[snip]
> That's probably one of these commits:
>
> 563558b2c735: pps: add parallel port PPS signal generator
> 46b402a0e5e4: pps: add parallel port PPS signal generator
> a10203c691ea: pps: add parallel port PPS client
>
> Plus CONFIG_PPS_CLIENT_PARPORT=y.
>
> This feature seems rather untested - this is a plain whitebox PC with a parallel
> port.
I'm investigating this. Thanks for the report!
> Btw., why does 46b402a0e5e4 and 563558b2c735 have the same title?
Well, 46b402a0e5e4 refers to version 6 of my patchset and 563558b2c735
is a diff between version 6 and 7. I've seen from the e-mails from
Andrew that I received that he added both patches and then folded the
latter into the former. The same thing happened with several other
patches but only these two sneaked in. Maybe this is a bug in the
software (quilt?).
--
Alexander
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 69+ messages in thread
* RE: Linux 2.6.38-rc1 doesn't boot
2011-01-20 11:25 ` Ingo Molnar
@ 2011-01-20 15:08 ` Anvin, H Peter
2011-01-21 7:18 ` Shaohua Li
0 siblings, 1 reply; 69+ messages in thread
From: Anvin, H Peter @ 2011-01-20 15:08 UTC (permalink / raw)
To: Ingo Molnar, Li, Shaohua
Cc: Markus Trippelsdorf, Lu, Hongjiu, Linus Torvalds,
Linux Kernel Mailing List, Sam Ravnborg
(The patch will need to be paired with removing the hacks in the linker script.)
-----Original Message-----
From: Ingo Molnar [mailto:mingo@elte.hu]
Sent: Thursday, January 20, 2011 3:26 AM
To: Li, Shaohua
Cc: Anvin, H Peter; Markus Trippelsdorf; Lu, Hongjiu; Linus Torvalds; Linux Kernel Mailing List; Sam Ravnborg
Subject: Re: Linux 2.6.38-rc1 doesn't boot
* Shaohua Li <shaohua.li@intel.com> wrote:
> it's not a build failure, without it, my i386 kernel can't boot
> actually.
Please try hpa's patch in this thread on top of very latest (today's) -git or latest
-tip:
http://people.redhat.com/mingo/tip.git/README
Does that result in a booting system? That way we can avoid most of the linker
script madness.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 69+ messages in thread
* [tip:core/urgent] lockdep: Move early boot local IRQ enable/disable status to init/main.c
2011-01-20 11:06 ` [PATCH 1/2] lockdep: move early boot local IRQ enable/disable status to init/main.c Tejun Heo
` (2 preceding siblings ...)
2011-01-20 11:51 ` [PATCH " Ingo Molnar
@ 2011-01-20 20:21 ` tip-bot for Tejun Heo
3 siblings, 0 replies; 69+ messages in thread
From: tip-bot for Tejun Heo @ 2011-01-20 20:21 UTC (permalink / raw)
To: linux-tip-commits
Cc: linux-kernel, hpa, mingo, torvalds, a.p.zijlstra, penberg, tj,
tglx, mingo
Commit-ID: 2ce802f62ba32a7d95748ac92bf351f76affb6ff
Gitweb: http://git.kernel.org/tip/2ce802f62ba32a7d95748ac92bf351f76affb6ff
Author: Tejun Heo <tj@kernel.org>
AuthorDate: Thu, 20 Jan 2011 12:06:35 +0100
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Thu, 20 Jan 2011 13:32:33 +0100
lockdep: Move early boot local IRQ enable/disable status to init/main.c
During early boot, local IRQ is disabled until IRQ subsystem is
properly initialized. During this time, no one should enable
local IRQ and some operations which usually are not allowed with
IRQ disabled, e.g. operations which might sleep or require
communications with other processors, are allowed.
lockdep tracked this with early_boot_irqs_off/on() callbacks.
As other subsystems need this information too, move it to
init/main.c and make it generally available. While at it,
toggle the boolean to early_boot_irqs_disabled instead of
enabled so that it can be initialized with %false and %true
indicates the exceptional condition.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110120110635.GB6036@htj.dyndns.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/xen/enlighten.c | 2 +-
include/linux/kernel.h | 2 ++
include/linux/lockdep.h | 8 --------
init/main.c | 13 +++++++++++--
kernel/lockdep.c | 18 +-----------------
kernel/trace/trace_irqsoff.c | 8 --------
6 files changed, 15 insertions(+), 36 deletions(-)
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 7e8d3bc..50542ef 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1194,7 +1194,7 @@ asmlinkage void __init xen_start_kernel(void)
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
local_irq_disable();
- early_boot_irqs_off();
+ early_boot_irqs_disabled = true;
memblock_init();
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 5a9d905..d07d805 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -243,6 +243,8 @@ extern int test_taint(unsigned flag);
extern unsigned long get_taint(void);
extern int root_mountflags;
+extern bool early_boot_irqs_disabled;
+
/* Values used for system_state */
extern enum system_states {
SYSTEM_BOOTING,
diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h
index 71c09b2..f638fd7 100644
--- a/include/linux/lockdep.h
+++ b/include/linux/lockdep.h
@@ -436,16 +436,8 @@ do { \
#endif /* CONFIG_LOCKDEP */
#ifdef CONFIG_TRACE_IRQFLAGS
-extern void early_boot_irqs_off(void);
-extern void early_boot_irqs_on(void);
extern void print_irqtrace_events(struct task_struct *curr);
#else
-static inline void early_boot_irqs_off(void)
-{
-}
-static inline void early_boot_irqs_on(void)
-{
-}
static inline void print_irqtrace_events(struct task_struct *curr)
{
}
diff --git a/init/main.c b/init/main.c
index 00799c1..33c37c3 100644
--- a/init/main.c
+++ b/init/main.c
@@ -96,6 +96,15 @@ static inline void mark_rodata_ro(void) { }
extern void tc_init(void);
#endif
+/*
+ * Debug helper: via this flag we know that we are in 'early bootup code'
+ * where only the boot processor is running with IRQ disabled. This means
+ * two things - IRQ must not be enabled before the flag is cleared and some
+ * operations which are not allowed with IRQ disabled are allowed while the
+ * flag is set.
+ */
+bool early_boot_irqs_disabled __read_mostly;
+
enum system_states system_state __read_mostly;
EXPORT_SYMBOL(system_state);
@@ -554,7 +563,7 @@ asmlinkage void __init start_kernel(void)
cgroup_init_early();
local_irq_disable();
- early_boot_irqs_off();
+ early_boot_irqs_disabled = true;
/*
* Interrupts are still disabled. Do necessary setups, then
@@ -621,7 +630,7 @@ asmlinkage void __init start_kernel(void)
if (!irqs_disabled())
printk(KERN_CRIT "start_kernel(): bug: interrupts were "
"enabled early\n");
- early_boot_irqs_on();
+ early_boot_irqs_disabled = false;
local_irq_enable();
/* Interrupts are enabled now so all GFP allocations are safe. */
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 42ba65d..0d2058d 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -2292,22 +2292,6 @@ mark_held_locks(struct task_struct *curr, enum mark_type mark)
}
/*
- * Debugging helper: via this flag we know that we are in
- * 'early bootup code', and will warn about any invalid irqs-on event:
- */
-static int early_boot_irqs_enabled;
-
-void early_boot_irqs_off(void)
-{
- early_boot_irqs_enabled = 0;
-}
-
-void early_boot_irqs_on(void)
-{
- early_boot_irqs_enabled = 1;
-}
-
-/*
* Hardirqs will be enabled:
*/
void trace_hardirqs_on_caller(unsigned long ip)
@@ -2319,7 +2303,7 @@ void trace_hardirqs_on_caller(unsigned long ip)
if (unlikely(!debug_locks || current->lockdep_recursion))
return;
- if (DEBUG_LOCKS_WARN_ON(unlikely(!early_boot_irqs_enabled)))
+ if (DEBUG_LOCKS_WARN_ON(unlikely(early_boot_irqs_disabled)))
return;
if (unlikely(curr->hardirqs_enabled)) {
diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c
index 5cf8c60..92b6e1e 100644
--- a/kernel/trace/trace_irqsoff.c
+++ b/kernel/trace/trace_irqsoff.c
@@ -453,14 +453,6 @@ void time_hardirqs_off(unsigned long a0, unsigned long a1)
* Stubs:
*/
-void early_boot_irqs_off(void)
-{
-}
-
-void early_boot_irqs_on(void)
-{
-}
-
void trace_softirqs_on(unsigned long ip)
{
}
^ permalink raw reply related [flat|nested] 69+ messages in thread
* [tip:core/urgent] smp: Allow on_each_cpu() to be called while early_boot_irqs_disabled status to init/main.c
2011-01-20 11:07 ` [PATCH 2/2] smp: allow on_each_cpu() to be called while early_boot_irqs_disabled " Tejun Heo
@ 2011-01-20 20:22 ` tip-bot for Tejun Heo
0 siblings, 0 replies; 69+ messages in thread
From: tip-bot for Tejun Heo @ 2011-01-20 20:22 UTC (permalink / raw)
To: linux-tip-commits
Cc: linux-kernel, hpa, mingo, torvalds, penberg, peterz, tj, tglx, mingo
Commit-ID: bd924e8cbd4b73ffb7d707a774c04f7e2cae88ed
Gitweb: http://git.kernel.org/tip/bd924e8cbd4b73ffb7d707a774c04f7e2cae88ed
Author: Tejun Heo <tj@kernel.org>
AuthorDate: Thu, 20 Jan 2011 12:07:13 +0100
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Thu, 20 Jan 2011 13:32:34 +0100
smp: Allow on_each_cpu() to be called while early_boot_irqs_disabled status to init/main.c
percpu may end up calling vfree() during early boot which in
turn may call on_each_cpu() for TLB flushes. The function of
on_each_cpu() can be done safely while IRQ is disabled during
early boot but it assumed that the function is always called
with local IRQ enabled which ended up enabling local IRQ
prematurely during boot and triggering a couple of warnings.
This patch updates on_each_cpu() and smp_call_function_many()
such on_each_cpu() can be used safely while
early_boot_irqs_disabled is set.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110120110713.GC6036@htj.dyndns.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Ingo Molnar <mingo@elte.hu>
---
kernel/smp.c | 11 +++++++----
1 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/kernel/smp.c b/kernel/smp.c
index 4ec30e0..4b83cd6 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -430,7 +430,7 @@ void smp_call_function_many(const struct cpumask *mask,
* can't happen.
*/
WARN_ON_ONCE(cpu_online(this_cpu) && irqs_disabled()
- && !oops_in_progress);
+ && !oops_in_progress && !early_boot_irqs_disabled);
/* So, what's a CPU they want? Ignoring this one. */
cpu = cpumask_first_and(mask, cpu_online_mask);
@@ -533,17 +533,20 @@ void ipi_call_unlock_irq(void)
#endif /* USE_GENERIC_SMP_HELPERS */
/*
- * Call a function on all processors
+ * Call a function on all processors. May be used during early boot while
+ * early_boot_irqs_disabled is set. Use local_irq_save/restore() instead
+ * of local_irq_disable/enable().
*/
int on_each_cpu(void (*func) (void *info), void *info, int wait)
{
+ unsigned long flags;
int ret = 0;
preempt_disable();
ret = smp_call_function(func, info, wait);
- local_irq_disable();
+ local_irq_save(flags);
func(info);
- local_irq_enable();
+ local_irq_restore(flags);
preempt_enable();
return ret;
}
^ permalink raw reply related [flat|nested] 69+ messages in thread
* tag&track [Re: Linux 2.6.38-rc1]
2011-01-19 5:42 ` Linus Torvalds
2011-01-19 5:56 ` Linus Torvalds
@ 2011-01-21 3:23 ` nobody
2011-01-21 8:24 ` Alexey Dobriyan
1 sibling, 1 reply; 69+ messages in thread
From: nobody @ 2011-01-21 3:23 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Linux Kernel Mailing List
On Tue, Jan 18, 2011 at 09:42:42PM -0800, Linus Torvalds wrote:
> On Tue, Jan 18, 2011 at 9:10 PM, nobody <darwinskernel@gmail.com> wrote:
> >
> > i wish i could do that for everything. i am pulling up to 500MiB every
> > -rc cycle and mostly codes for hardwares i don't have.
>
> No you're not.
... i was lying.
> So no, you're not pulling 500MiB every -rc cycle, unless you're doing
> something stupid like using http (which will trigger a re-fetch, since
> I end up repacking a couple of times a release) or always re-cloning.
re-cloning to reclaim disk space. but disk space is not the only thing;
i can compile a tar release all in ram (1G) but re-cloning 388M into a
build directory there is a no go.
^ permalink raw reply [flat|nested] 69+ messages in thread
* RE: Linux 2.6.38-rc1 doesn't boot
2011-01-20 15:08 ` Anvin, H Peter
@ 2011-01-21 7:18 ` Shaohua Li
2011-01-21 7:55 ` Shaohua Li
2011-01-21 15:28 ` H. Peter Anvin
0 siblings, 2 replies; 69+ messages in thread
From: Shaohua Li @ 2011-01-21 7:18 UTC (permalink / raw)
To: Anvin, H Peter
Cc: Ingo Molnar, Markus Trippelsdorf, Lu, Hongjiu, Linus Torvalds,
Linux Kernel Mailing List, Sam Ravnborg
On Thu, 2011-01-20 at 23:08 +0800, Anvin, H Peter wrote:
> (The patch will need to be paired with removing the hacks in the linker script.)
>
> -----Original Message-----
> From: Ingo Molnar [mailto:mingo@elte.hu]
> Sent: Thursday, January 20, 2011 3:26 AM
> To: Li, Shaohua
> Cc: Anvin, H Peter; Markus Trippelsdorf; Lu, Hongjiu; Linus Torvalds; Linux Kernel Mailing List; Sam Ravnborg
> Subject: Re: Linux 2.6.38-rc1 doesn't boot
>
>
> * Shaohua Li <shaohua.li@intel.com> wrote:
>
> > it's not a build failure, without it, my i386 kernel can't boot
> > actually.
>
> Please try hpa's patch in this thread on top of very latest (today's) -git or latest
> -tip:
>
> http://people.redhat.com/mingo/tip.git/README
>
> Does that result in a booting system? That way we can avoid most of the linker
> script madness.
Need some changes to make it compile and work on both 32 and 64 bit
kernel. below one is working for me:
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index bf47007..d8f1c6d 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -34,11 +34,9 @@ OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
#ifdef CONFIG_X86_32
OUTPUT_ARCH(i386)
ENTRY(phys_startup_32)
-jiffies = jiffies_64;
#else
OUTPUT_ARCH(i386:x86-64)
ENTRY(phys_startup_64)
-jiffies_64 = jiffies;
#endif
#if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA)
@@ -203,6 +201,7 @@ SECTIONS
*(.jiffies)
}
jiffies = VVIRT(.jiffies);
+ jiffies_64 = jiffies;
.vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) {
*(.vsyscall_3)
diff --git a/kernel/timer.c b/kernel/timer.c
index 43ca993..36cb5e3 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -41,6 +41,7 @@
#include <linux/sched.h>
#include <linux/slab.h>
+#include <asm/byteorder.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
#include <asm/div64.h>
@@ -53,6 +54,11 @@
u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES;
EXPORT_SYMBOL(jiffies_64);
+#if defined(__LITTLE_ENDIAN) || (BITS_PER_LONG >= 64)
+asm(".global jiffies; jiffies = jiffies_64");
+#else
+asm(".global jiffies; jiffies = jiffies_64 + 4");
+#endif
/*
* per-CPU timer vector definitions:
^ permalink raw reply related [flat|nested] 69+ messages in thread
* RE: Linux 2.6.38-rc1 doesn't boot
2011-01-21 7:18 ` Shaohua Li
@ 2011-01-21 7:55 ` Shaohua Li
2011-01-21 15:28 ` H. Peter Anvin
1 sibling, 0 replies; 69+ messages in thread
From: Shaohua Li @ 2011-01-21 7:55 UTC (permalink / raw)
To: Anvin, H Peter
Cc: Ingo Molnar, Markus Trippelsdorf, Lu, Hongjiu, Linus Torvalds,
Linux Kernel Mailing List, Sam Ravnborg
On Fri, 2011-01-21 at 15:18 +0800, Shaohua Li wrote:
> On Thu, 2011-01-20 at 23:08 +0800, Anvin, H Peter wrote:
> > (The patch will need to be paired with removing the hacks in the linker script.)
> >
> > -----Original Message-----
> > From: Ingo Molnar [mailto:mingo@elte.hu]
> > Sent: Thursday, January 20, 2011 3:26 AM
> > To: Li, Shaohua
> > Cc: Anvin, H Peter; Markus Trippelsdorf; Lu, Hongjiu; Linus Torvalds; Linux Kernel Mailing List; Sam Ravnborg
> > Subject: Re: Linux 2.6.38-rc1 doesn't boot
> >
> >
> > * Shaohua Li <shaohua.li@intel.com> wrote:
> >
> > > it's not a build failure, without it, my i386 kernel can't boot
> > > actually.
> >
> > Please try hpa's patch in this thread on top of very latest (today's) -git or latest
> > -tip:
> >
> > http://people.redhat.com/mingo/tip.git/README
> >
> > Does that result in a booting system? That way we can avoid most of the linker
> > script madness.
> Need some changes to make it compile and work on both 32 and 64 bit
> kernel. below one is working for me:
Hmm, a slightly modified version of the reverted patch works here for
both 32/64 bit kernels and with old/new binutils too. Maybe we can use
it currently till we remove the link script trick?
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index bf47007..69e5968 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -34,11 +34,9 @@ OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
#ifdef CONFIG_X86_32
OUTPUT_ARCH(i386)
ENTRY(phys_startup_32)
-jiffies = jiffies_64;
#else
OUTPUT_ARCH(i386:x86-64)
ENTRY(phys_startup_64)
-jiffies_64 = jiffies;
#endif
#if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA)
@@ -142,6 +140,9 @@ SECTIONS
CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
DATA_DATA
+#ifdef CONFIG_X86_32
+ jiffies = jiffies_64;
+#endif
CONSTRUCTORS
/* rarely changed data like cpu maps */
@@ -203,6 +204,7 @@ SECTIONS
*(.jiffies)
}
jiffies = VVIRT(.jiffies);
+ jiffies_64 = jiffies;
.vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) {
*(.vsyscall_3)
^ permalink raw reply related [flat|nested] 69+ messages in thread
* Re: tag&track [Re: Linux 2.6.38-rc1]
2011-01-21 3:23 ` tag&track [Re: Linux 2.6.38-rc1] nobody
@ 2011-01-21 8:24 ` Alexey Dobriyan
0 siblings, 0 replies; 69+ messages in thread
From: Alexey Dobriyan @ 2011-01-21 8:24 UTC (permalink / raw)
To: nobody; +Cc: Linus Torvalds, Linux Kernel Mailing List
On Thu, Jan 20, 2011 at 10:23:10PM -0500, nobody wrote:
> On Tue, Jan 18, 2011 at 09:42:42PM -0800, Linus Torvalds wrote:
> > On Tue, Jan 18, 2011 at 9:10 PM, nobody <darwinskernel@gmail.com> wrote:
> > >
> > > i wish i could do that for everything. i am pulling up to 500MiB every
> > > -rc cycle and mostly codes for hardwares i don't have.
> >
> > No you're not.
>
> ... i was lying.
>
> > So no, you're not pulling 500MiB every -rc cycle, unless you're doing
> > something stupid like using http (which will trigger a re-fetch, since
> > I end up repacking a couple of times a release) or always re-cloning.
>
> re-cloning to reclaim disk space. but disk space is not the only thing;
> i can compile a tar release all in ram (1G) but re-cloning 388M into a
> build directory there is a no go.
git-clone -s
sheesh...
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: PPS parport boot lockup: INFO: HARDIRQ-READ-safe -> HARDIRQ-READ-unsafe lock order detected
2011-01-19 8:39 ` PPS parport boot lockup: INFO: HARDIRQ-READ-safe -> HARDIRQ-READ-unsafe lock order detected Ingo Molnar
2011-01-20 13:04 ` Alexander Gordeev
@ 2011-01-21 14:44 ` Alexander Gordeev
2011-01-21 16:37 ` Linus Torvalds
2011-01-24 15:12 ` [PATCH] parport: make lockdep happy with waitlist_lock Alexander Gordeev
2 siblings, 1 reply; 69+ messages in thread
From: Alexander Gordeev @ 2011-01-21 14:44 UTC (permalink / raw)
To: Ingo Molnar
Cc: Linus Torvalds, Andrew Morton, Linux Kernel Mailing List,
Thomas Gleixner
[-- Attachment #1: Type: text/plain, Size: 6025 bytes --]
В Wed, 19 Jan 2011 09:39:16 +0100
Ingo Molnar <mingo@elte.hu> пишет:
>
> .38-rc1 allyes64 bootup locks up soft, but first produces this lockdep splat:
>
> [ 73.524088] pps_ldisc: PPS line discipline registered
> [ 73.529156] initcall pps_tty_init+0x0/0xa4 returned 0 after 4950 usecs
> [ 73.535691] calling pps_parport_init+0x0/0x60 @ 1
> [ 73.540491] pps_parport: parallel port PPS client
> [ 73.545219]
> [ 73.545220] ======================================================
> [ 73.549198] [ INFO: HARDIRQ-READ-safe -> HARDIRQ-READ-unsafe lock order detected ]
> [ 73.549198] 2.6.38-rc1-tip-01889-g7ca14ab-dirty #86514
> [ 73.549198] ------------------------------------------------------
> [ 73.549198] swapper/1 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
> [ 73.549198] (&(&tmp->waitlist_lock)->rlock){+.+...}, at: [<ffffffff818f7ef4>] parport_claim+0x1c3/0x22f
> [ 73.549198]
> [ 73.549198] and this task is already holding:
> [ 73.549198] (&tmp->cad_lock){.-....}, at: [<ffffffff818f7d86>] parport_claim+0x55/0x22f
> [ 73.549198] which would create a new lock dependency:
> [ 73.549198] (&tmp->cad_lock){.-....} -> (&(&tmp->waitlist_lock)->rlock){+.+...}
> [ 73.549198]
> [ 73.549198] but this new dependency connects a HARDIRQ-READ-irq-safe lock:
> [ 73.549198] (&tmp->cad_lock){.-....}
> [ 73.549198] ... which became HARDIRQ-READ-irq-safe at:
> [ 73.549198] [<ffffffff810cef78>] __lock_acquire+0x2b9/0xdcf
> [ 73.549198] [<ffffffff810cffb3>] lock_acquire+0xcf/0xf9
> [ 73.549198] [<ffffffff82dc602a>] _raw_read_lock+0x39/0x6e
> [ 73.549198] [<ffffffff818f7d07>] parport_irq_handler+0x26/0x50
> [ 73.549198] [<ffffffff81104158>] handle_IRQ_event+0x61/0x13d
> [ 73.549198] [<ffffffff81106426>] handle_edge_irq+0xe3/0x12f
> [ 73.549198] [<ffffffff810423b9>] handle_irq+0x88/0x90
> [ 73.549198] [<ffffffff82dccbdd>] do_IRQ+0x4d/0xa5
> [ 73.549198] [<ffffffff82dc6493>] ret_from_intr+0x0/0x1a
> [ 73.549198] [<ffffffff81b43553>] ppa_d_pulse+0x2d/0x52
> [ 73.549198] [<ffffffff81b43c04>] ppa_disconnect.clone.1+0x1a/0x43
> [ 73.549198] [<ffffffff81b44115>] __ppa_attach+0x238/0x64d
> [ 73.549198] [<ffffffff81b44538>] ppa_attach+0xe/0x10
> [ 73.549198] [<ffffffff818f8474>] parport_register_driver+0x3e/0x86
> [ 73.549198] [<ffffffff849e7a80>] ppa_driver_init+0x25/0x27
> [ 73.549198] [<ffffffff810021ef>] do_one_initcall+0x57/0x13c
> [ 73.549198] [<ffffffff84989e5e>] kernel_init+0x199/0x222
> [ 73.549198] [<ffffffff81040b44>] kernel_thread_helper+0x4/0x10
> [ 73.549198]
> [ 73.549198] to a HARDIRQ-READ-irq-unsafe lock:
> [ 73.549198] (&(&tmp->waitlist_lock)->rlock){+.+...}
> [ 73.549198] ... which became HARDIRQ-READ-irq-unsafe at:
> [ 73.549198] ... [<ffffffff810cf02a>] __lock_acquire+0x36b/0xdcf
> [ 73.549198] [<ffffffff810cffb3>] lock_acquire+0xcf/0xf9
> [ 73.549198] [<ffffffff82dc57c3>] _raw_spin_lock+0x36/0x69
> [ 73.549198] [<ffffffff818f8916>] parport_unregister_device+0xc7/0x154
> [ 73.549198] [<ffffffff818fb7a3>] parport_close+0xe/0x10
> [ 73.549198] [<ffffffff818fc34f>] parport_device_id+0x713/0x728
> [ 73.549198] [<ffffffff818fbb6a>] parport_daisy_init+0x3b0/0x42b
> [ 73.549198] [<ffffffff818f8358>] parport_announce_port+0x16/0xf4
> [ 73.549198] [<ffffffff818fdb77>] parport_pc_probe_port+0xb27/0xbaf
> [ 73.549198] [<ffffffff818fdf90>] parport_pc_pnp_probe+0x17f/0x1a7
> [ 73.549198] [<ffffffff817927f2>] pnp_device_probe+0x81/0xab
> [ 73.549198] [<ffffffff819037bf>] driver_probe_device+0x11d/0x1e5
> [ 73.549198] [<ffffffff819038d6>] __driver_attach+0x4f/0x70
> [ 73.549198] [<ffffffff8190282e>] bus_for_each_dev+0x5c/0x88
> [ 73.549198] [<ffffffff819033e4>] driver_attach+0x1e/0x20
> [ 73.549198] [<ffffffff81902fdd>] bus_add_driver+0xc7/0x21e
> [ 73.549198] [<ffffffff81903b39>] driver_register+0x9b/0x108
> [ 73.549198] [<ffffffff8179256b>] pnp_register_driver+0x21/0x23
> [ 73.549198] [<ffffffff849dcf49>] parport_pc_init+0x282/0x311
> [ 73.549198] [<ffffffff810021ef>] do_one_initcall+0x57/0x13c
> [ 73.549198] [<ffffffff84989e5e>] kernel_init+0x199/0x222
> [ 73.549198] [<ffffffff81040b44>] kernel_thread_helper+0x4/0x10
> [ 73.549198]
> [ 73.549198] other info that might help us debug this:
> [ 73.549198]
> [ 73.549198] 2 locks held by swapper/1:
> [ 73.549198] #0: (registration_lock){+.+.+.}, at: [<ffffffff818f8465>] parport_register_driver+0x2f/0x86
> [ 73.549198] #1: (&tmp->cad_lock){.-....}, at: [<ffffffff818f7d86>] parport_claim+0x55/0x22f
[snip]
>
> That's probably one of these commits:
>
> 563558b2c735: pps: add parallel port PPS signal generator
> 46b402a0e5e4: pps: add parallel port PPS signal generator
> a10203c691ea: pps: add parallel port PPS client
>
> Plus CONFIG_PPS_CLIENT_PARPORT=y.
>
> This feature seems rather untested - this is a plain whitebox PC with a parallel
> port.
Well, I only see that there could be a problem with parport's
waitlist_lock because it is used:
* in parport_claim which can be called from an irq handler
* in parport_unregister_device without disabling interrupts
But parport_unregister_device should probably never be called while
parport interrupts are enabled (in hardware). So this is a false
positive. Is this right?
But I also see here that there is probably a contention for the port
between ppa and pps_parport. So maybe I shouldn't use
parport_claim_or_block because it blocks forever and therefore can
lock up the thread that loads the module. It's strange however that
this function is used in lots of other modules without trouble.
Can you please check if the lockup is caused by parport_claim_or_block
in pps_parport/pps_gen_parport? I built 2.6.38-rc1 kernel with
allyesconfig but it locks up long before pps_parport gets loaded.
--
Alexander
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1 doesn't boot
2011-01-21 7:18 ` Shaohua Li
2011-01-21 7:55 ` Shaohua Li
@ 2011-01-21 15:28 ` H. Peter Anvin
2011-01-21 15:37 ` Lu, Hongjiu
1 sibling, 1 reply; 69+ messages in thread
From: H. Peter Anvin @ 2011-01-21 15:28 UTC (permalink / raw)
To: Li, Shaohua
Cc: Ingo Molnar, Markus Trippelsdorf, Lu, Hongjiu, Linus Torvalds,
Linux Kernel Mailing List, Sam Ravnborg
On 01/20/2011 11:18 PM, Li, Shaohua wrote:
> *(.jiffies)
> }
> jiffies = VVIRT(.jiffies);
> + jiffies_64 = jiffies;
>
OK, this is just messed up. If we need jiffies in a special section
then we should declare it as such (see __jiffy_data), but it's not clear
to me why we would. This seems like hack upon hack.
However, I suspect we may want to put jiffies into a .S file, and that
.S file needs to take into account architectures which need underscore
prefixes (which really sucks to have in ELF and is a major fail on those
ABI designers...)
-hpa
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1
2011-01-19 21:40 ` Linux 2.6.38-rc1 Alan Cox
@ 2011-01-21 15:30 ` Aaro Koskinen
0 siblings, 0 replies; 69+ messages in thread
From: Aaro Koskinen @ 2011-01-21 15:30 UTC (permalink / raw)
To: Alan Cox; +Cc: Linux Kernel Mailing List
Hi,
On Wed, 19 Jan 2011, Alan Cox wrote:
> Only oddity is the kmemleak report is reporting a few possible leaks and
> suggesting I look in the sysfs file .. which isn't there ???
It's a debugfs file; the log assumes you have debugfs mounted at
/sys/kernel/debug/.
A.
^ permalink raw reply [flat|nested] 69+ messages in thread
* RE: Linux 2.6.38-rc1 doesn't boot
2011-01-21 15:28 ` H. Peter Anvin
@ 2011-01-21 15:37 ` Lu, Hongjiu
2011-01-21 21:09 ` Ingo Molnar
0 siblings, 1 reply; 69+ messages in thread
From: Lu, Hongjiu @ 2011-01-21 15:37 UTC (permalink / raw)
To: Anvin, H Peter, Li, Shaohua
Cc: Ingo Molnar, Markus Trippelsdorf, Linus Torvalds,
Linux Kernel Mailing List, Sam Ravnborg
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 1087 bytes --]
Or we can just ban those broken linker versions.
H.J.
> -----Original Message-----
> From: Anvin, H Peter
> Sent: Friday, January 21, 2011 7:29 AM
> To: Li, Shaohua
> Cc: Ingo Molnar; Markus Trippelsdorf; Lu, Hongjiu; Linus Torvalds;
> Linux Kernel Mailing List; Sam Ravnborg
> Subject: Re: Linux 2.6.38-rc1 doesn't boot
>
> On 01/20/2011 11:18 PM, Li, Shaohua wrote:
> > *(.jiffies)
> > }
> > jiffies = VVIRT(.jiffies);
> > + jiffies_64 = jiffies;
> >
>
> OK, this is just messed up. If we need jiffies in a special section
> then we should declare it as such (see __jiffy_data), but it's not
> clear
> to me why we would. This seems like hack upon hack.
>
> However, I suspect we may want to put jiffies into a .S file, and that
> .S file needs to take into account architectures which need underscore
> prefixes (which really sucks to have in ELF and is a major fail on
> those
> ABI designers...)
>
> -hpa
ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: PPS parport boot lockup: INFO: HARDIRQ-READ-safe -> HARDIRQ-READ-unsafe lock order detected
2011-01-21 14:44 ` Alexander Gordeev
@ 2011-01-21 16:37 ` Linus Torvalds
2011-01-21 19:43 ` Ingo Molnar
2011-01-24 15:00 ` PPS parport boot lockup: INFO: HARDIRQ-READ-safe -> HARDIRQ-READ-unsafe lock order detected Alexander Gordeev
0 siblings, 2 replies; 69+ messages in thread
From: Linus Torvalds @ 2011-01-21 16:37 UTC (permalink / raw)
To: Alexander Gordeev
Cc: Ingo Molnar, Andrew Morton, Linux Kernel Mailing List, Thomas Gleixner
On Fri, Jan 21, 2011 at 6:44 AM, Alexander Gordeev
<lasaine@lvk.cs.msu.su> wrote:
>
> But parport_unregister_device should probably never be called while
> parport interrupts are enabled (in hardware). So this is a false
> positive. Is this right?
"Enabled in hardware" is immaterial - with shared interrupts, it
doesn't matter one whit whether parport interrupts are disabled on the
chip, because some other chip may be using the same interrupt line.
So you'd need to have something that guarantees that there is no
concurrent use, like actually unregistering the irq handler itself.
Things like that can work.
HOWEVER, even then I think you should see the lockdep message as a
problem. The automated toolchain is great because it shows problems
that it thinks might happen - not when they happen, but based on a
simpler theoretical model. Ignoring the error because there is some
rule in place that is hard to explain to the automated toolchain is
the wrong thing to do, because it makes the lockdep automation less
reliable.
Think of it as a compiler warning - maybe the warning doesn't actually
imply an actual bug, but you should strive to write code that doesn't
warn, because otherwise the noise from the warning you ignored will
make it harder for others to see the _real_ bugs.
Linus
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: PPS parport boot lockup: INFO: HARDIRQ-READ-safe -> HARDIRQ-READ-unsafe lock order detected
2011-01-21 16:37 ` Linus Torvalds
@ 2011-01-21 19:43 ` Ingo Molnar
2011-01-24 23:28 ` Alexander Gordeev
2011-01-24 23:46 ` [PATCH] pps: claim parallel port exclusively Alexander Gordeev
2011-01-24 15:00 ` PPS parport boot lockup: INFO: HARDIRQ-READ-safe -> HARDIRQ-READ-unsafe lock order detected Alexander Gordeev
1 sibling, 2 replies; 69+ messages in thread
From: Ingo Molnar @ 2011-01-21 19:43 UTC (permalink / raw)
To: Linus Torvalds
Cc: Alexander Gordeev, Andrew Morton, Linux Kernel Mailing List,
Thomas Gleixner
* Linus Torvalds <torvalds@linux-foundation.org> wrote:
> HOWEVER, even then I think you should see the lockdep message as a
> problem. The automated toolchain is great because it shows problems
> that it thinks might happen - not when they happen, but based on a
> simpler theoretical model. Ignoring the error because there is some
> rule in place that is hard to explain to the automated toolchain is
> the wrong thing to do, because it makes the lockdep automation less
> reliable.
Yeah. Also, inevitably the false positives have a higher likelyhood
of making it into a released kernel, often because the bugs where
there was a real lockup as well got noticed via other means.
It's similar with compiler warnings as well: the questionable ones where
GCC is wrong or at least confused accumulate.
Also note that here there's a real lockup here as well, shortly after the lockdep
message - the boot never continues, the box keep spewing the PPS debug messages:
[ 76.240020] pps pps0: PPS event at 4294911356
[ 76.244380] pps pps0: PPS event at 1295471377.240018362
[ 76.249608] pps pps0: capture assert seq #2
[ 77.252019] pps pps0: PPS event at 4294911609
[ 77.256379] pps pps0: PPS event at 1295471378.252017372
[ 77.261604] pps pps0: capture assert seq #3
[ 78.264021] pps pps0: PPS event at 4294911862
[ 78.268387] pps pps0: PPS event at 1295471379.264018619
[ 78.273621] pps pps0: capture assert seq #4
[ 79.276018] pps pps0: PPS event at 4294912115
[ 79.280384] pps pps0: PPS event at 1295471380.276016791
[ 79.285619] pps pps0: capture assert seq #5
But nothing happens, the boot never continues.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1 doesn't boot
2011-01-21 15:37 ` Lu, Hongjiu
@ 2011-01-21 21:09 ` Ingo Molnar
0 siblings, 0 replies; 69+ messages in thread
From: Ingo Molnar @ 2011-01-21 21:09 UTC (permalink / raw)
To: Lu, Hongjiu
Cc: Anvin, H Peter, Li, Shaohua, Markus Trippelsdorf, Linus Torvalds,
Linux Kernel Mailing List, Sam Ravnborg
* Lu, Hongjiu <hongjiu.lu@intel.com> wrote:
> Or we can just ban those broken linker versions.
And not build the kernel on widely released distributions? I'm not sure that's
acceptable.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: Linux 2.6.38-rc1
2011-01-19 2:07 ` Linus Torvalds
2011-01-19 3:42 ` Justin Mattock
@ 2011-01-23 8:13 ` Török Edwin
1 sibling, 0 replies; 69+ messages in thread
From: Török Edwin @ 2011-01-23 8:13 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Linux Kernel Mailing List
On 2011-01-19 04:07, Linus Torvalds wrote:
> On Tue, Jan 18, 2011 at 3:54 PM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
>>
>> It's been two weeks, and the merge window for 2.6.38 is thus closed.
>
> Oh, and it looks like mirroring from master.kernel.org is being very
> slow
I think that pulling from kernel.org became slower too. (not sure
exactly when but probably since about a year).
When I run git pull, it just sits there for a long time, with no visible
network/disk I/O, and only after that it starts the "remote: Counting
objects" phase.
I just tried to measure that time and it is ~12s now, which is not that
bad, but I remember that I even had to wait minutes to see the "Counting
objects" phase in December.
Is it because git on the server side needs to figure out which objects I
already have and which I don't? But I thought thats part of the
"Counting objects" phase, so what happens before that, and why are there
no progress messages about it?
Best regards,
--Edwin
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: PPS parport boot lockup: INFO: HARDIRQ-READ-safe -> HARDIRQ-READ-unsafe lock order detected
2011-01-21 16:37 ` Linus Torvalds
2011-01-21 19:43 ` Ingo Molnar
@ 2011-01-24 15:00 ` Alexander Gordeev
1 sibling, 0 replies; 69+ messages in thread
From: Alexander Gordeev @ 2011-01-24 15:00 UTC (permalink / raw)
To: Linus Torvalds
Cc: Ingo Molnar, Andrew Morton, Linux Kernel Mailing List, Thomas Gleixner
[-- Attachment #1: Type: text/plain, Size: 1619 bytes --]
В Fri, 21 Jan 2011 08:37:34 -0800
Linus Torvalds <torvalds@linux-foundation.org> пишет:
> On Fri, Jan 21, 2011 at 6:44 AM, Alexander Gordeev
> <lasaine@lvk.cs.msu.su> wrote:
> >
> > But parport_unregister_device should probably never be called while
> > parport interrupts are enabled (in hardware). So this is a false
> > positive. Is this right?
>
> "Enabled in hardware" is immaterial - with shared interrupts, it
> doesn't matter one whit whether parport interrupts are disabled on the
> chip, because some other chip may be using the same interrupt line.
>
> So you'd need to have something that guarantees that there is no
> concurrent use, like actually unregistering the irq handler itself.
> Things like that can work.
>
> HOWEVER, even then I think you should see the lockdep message as a
> problem. The automated toolchain is great because it shows problems
> that it thinks might happen - not when they happen, but based on a
> simpler theoretical model. Ignoring the error because there is some
> rule in place that is hard to explain to the automated toolchain is
> the wrong thing to do, because it makes the lockdep automation less
> reliable.
>
> Think of it as a compiler warning - maybe the warning doesn't actually
> imply an actual bug, but you should strive to write code that doesn't
> warn, because otherwise the noise from the warning you ignored will
> make it harder for others to see the _real_ bugs.
>
> Linus
Ok, thank you very much for clarification!
I'll send the patch as reply to the first e-mail.
--
Alexander
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 69+ messages in thread
* [PATCH] parport: make lockdep happy with waitlist_lock
2011-01-19 8:39 ` PPS parport boot lockup: INFO: HARDIRQ-READ-safe -> HARDIRQ-READ-unsafe lock order detected Ingo Molnar
2011-01-20 13:04 ` Alexander Gordeev
2011-01-21 14:44 ` Alexander Gordeev
@ 2011-01-24 15:12 ` Alexander Gordeev
2011-01-24 15:28 ` Ingo Molnar
2 siblings, 1 reply; 69+ messages in thread
From: Alexander Gordeev @ 2011-01-24 15:12 UTC (permalink / raw)
To: Ingo Molnar
Cc: Linus Torvalds, Andrew Morton, Linux Kernel Mailing List,
Thomas Gleixner, Alexander Gordeev
parport_unregister_device should never be used when interrupts are
enabled in hardware and irq handler is registered so there is no need
to disable interrupts when using waitlist_lock. But there is no way to
explain this subtle semantics to lockdep analyzer. So disable interrupts
here too to simplify things. The price is negligible.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
---
drivers/parport/share.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/parport/share.c b/drivers/parport/share.c
index a2d9d1e..c3dd1a3 100644
--- a/drivers/parport/share.c
+++ b/drivers/parport/share.c
@@ -678,7 +678,7 @@ void parport_unregister_device(struct pardevice *dev)
/* Make sure we haven't left any pointers around in the wait
* list. */
- spin_lock (&port->waitlist_lock);
+ spin_lock_irq (&port->waitlist_lock);
if (dev->waitprev || dev->waitnext || port->waithead == dev) {
if (dev->waitprev)
dev->waitprev->waitnext = dev->waitnext;
@@ -689,7 +689,7 @@ void parport_unregister_device(struct pardevice *dev)
else
port->waittail = dev->waitprev;
}
- spin_unlock (&port->waitlist_lock);
+ spin_unlock_irq (&port->waitlist_lock);
kfree(dev->state);
kfree(dev);
--
1.7.2.3
^ permalink raw reply related [flat|nested] 69+ messages in thread
* Re: [PATCH] parport: make lockdep happy with waitlist_lock
2011-01-24 15:12 ` [PATCH] parport: make lockdep happy with waitlist_lock Alexander Gordeev
@ 2011-01-24 15:28 ` Ingo Molnar
2011-01-24 15:33 ` Alexander Gordeev
0 siblings, 1 reply; 69+ messages in thread
From: Ingo Molnar @ 2011-01-24 15:28 UTC (permalink / raw)
To: Alexander Gordeev
Cc: Linus Torvalds, Andrew Morton, Linux Kernel Mailing List,
Thomas Gleixner
* Alexander Gordeev <lasaine@lvk.cs.msu.su> wrote:
> parport_unregister_device should never be used when interrupts are
> enabled in hardware and irq handler is registered so there is no need
> to disable interrupts when using waitlist_lock. But there is no way to
> explain this subtle semantics to lockdep analyzer. So disable interrupts
> here too to simplify things. The price is negligible.
>
> Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
> ---
> drivers/parport/share.c | 4 ++--
> 1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/parport/share.c b/drivers/parport/share.c
> index a2d9d1e..c3dd1a3 100644
> --- a/drivers/parport/share.c
> +++ b/drivers/parport/share.c
> @@ -678,7 +678,7 @@ void parport_unregister_device(struct pardevice *dev)
>
> /* Make sure we haven't left any pointers around in the wait
> * list. */
> - spin_lock (&port->waitlist_lock);
> + spin_lock_irq (&port->waitlist_lock);
Small detail: please use a consistent coding style, i.e. 'spin_lock_irq(', not
'spin_lock_irq ('.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 69+ messages in thread
* [PATCH] parport: make lockdep happy with waitlist_lock
2011-01-24 15:28 ` Ingo Molnar
@ 2011-01-24 15:33 ` Alexander Gordeev
0 siblings, 0 replies; 69+ messages in thread
From: Alexander Gordeev @ 2011-01-24 15:33 UTC (permalink / raw)
To: Ingo Molnar
Cc: Linus Torvalds, Andrew Morton, Linux Kernel Mailing List,
Thomas Gleixner, Alexander Gordeev
parport_unregister_device should never be used when interrupts are
enabled in hardware and irq handler is registered so there is no need
to disable interrupts when using waitlist_lock. But there is no way to
explain this subtle semantics to lockdep analyzer. So disable interrupts
here too to simplify things. The price is negligible.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
---
drivers/parport/share.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/parport/share.c b/drivers/parport/share.c
index a2d9d1e..a848e02 100644
--- a/drivers/parport/share.c
+++ b/drivers/parport/share.c
@@ -678,7 +678,7 @@ void parport_unregister_device(struct pardevice *dev)
/* Make sure we haven't left any pointers around in the wait
* list. */
- spin_lock (&port->waitlist_lock);
+ spin_lock_irq(&port->waitlist_lock);
if (dev->waitprev || dev->waitnext || port->waithead == dev) {
if (dev->waitprev)
dev->waitprev->waitnext = dev->waitnext;
@@ -689,7 +689,7 @@ void parport_unregister_device(struct pardevice *dev)
else
port->waittail = dev->waitprev;
}
- spin_unlock (&port->waitlist_lock);
+ spin_unlock_irq(&port->waitlist_lock);
kfree(dev->state);
kfree(dev);
--
1.7.2.3
^ permalink raw reply related [flat|nested] 69+ messages in thread
* Re: PPS parport boot lockup: INFO: HARDIRQ-READ-safe -> HARDIRQ-READ-unsafe lock order detected
2011-01-21 19:43 ` Ingo Molnar
@ 2011-01-24 23:28 ` Alexander Gordeev
2011-01-24 23:46 ` [PATCH] pps: claim parallel port exclusively Alexander Gordeev
1 sibling, 0 replies; 69+ messages in thread
From: Alexander Gordeev @ 2011-01-24 23:28 UTC (permalink / raw)
To: Ingo Molnar
Cc: Linus Torvalds, Andrew Morton, Linux Kernel Mailing List,
Thomas Gleixner
[-- Attachment #1: Type: text/plain, Size: 2321 bytes --]
В Fri, 21 Jan 2011 20:43:17 +0100
Ingo Molnar <mingo@elte.hu> пишет:
>
> * Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> > HOWEVER, even then I think you should see the lockdep message as a
> > problem. The automated toolchain is great because it shows problems
> > that it thinks might happen - not when they happen, but based on a
> > simpler theoretical model. Ignoring the error because there is some
> > rule in place that is hard to explain to the automated toolchain is
> > the wrong thing to do, because it makes the lockdep automation less
> > reliable.
>
> Yeah. Also, inevitably the false positives have a higher likelyhood
> of making it into a released kernel, often because the bugs where
> there was a real lockup as well got noticed via other means.
>
> It's similar with compiler warnings as well: the questionable ones where
> GCC is wrong or at least confused accumulate.
>
> Also note that here there's a real lockup here as well, shortly after the lockdep
> message - the boot never continues, the box keep spewing the PPS debug messages:
>
> [ 76.240020] pps pps0: PPS event at 4294911356
> [ 76.244380] pps pps0: PPS event at 1295471377.240018362
> [ 76.249608] pps pps0: capture assert seq #2
> [ 77.252019] pps pps0: PPS event at 4294911609
> [ 77.256379] pps pps0: PPS event at 1295471378.252017372
> [ 77.261604] pps pps0: capture assert seq #3
> [ 78.264021] pps pps0: PPS event at 4294911862
> [ 78.268387] pps pps0: PPS event at 1295471379.264018619
> [ 78.273621] pps pps0: capture assert seq #4
> [ 79.276018] pps pps0: PPS event at 4294912115
> [ 79.280384] pps pps0: PPS event at 1295471380.276016791
> [ 79.285619] pps pps0: capture assert seq #5
>
> But nothing happens, the boot never continues.
I think I was able to reproduce the lockup by compiling parport,
parport_pc, pps_parport and pps_gen_parport into the kernel. Both
pps_parport and pps_gen_parport use parport_claim_or_block() to claim
the parallel port. They compete for the parallel port at bootup. One
of them gets it. The other one then lockups the system.
After reading the docs I decided to just add PARPORT_FLAG_EXCL and it
worked. The patch follows. Does it help with the lockup you experience?
--
Alexander
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 69+ messages in thread
* [PATCH] pps: claim parallel port exclusively
2011-01-21 19:43 ` Ingo Molnar
2011-01-24 23:28 ` Alexander Gordeev
@ 2011-01-24 23:46 ` Alexander Gordeev
2011-01-25 0:19 ` Ingo Molnar
1 sibling, 1 reply; 69+ messages in thread
From: Alexander Gordeev @ 2011-01-24 23:46 UTC (permalink / raw)
To: Ingo Molnar
Cc: Linus Torvalds, Andrew Morton, Linux Kernel Mailing List,
Thomas Gleixner, Alexander Gordeev
Both pps_parport and pps_gen_parport are written in a way that they
can't share a port with any other driver. This can result in locking up
the process that loads modules or even the whole kernel if the modules
are compiled in. Use PARPORT_FLAG_EXCL to indicate this.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
---
drivers/pps/clients/pps_parport.c | 2 +-
drivers/pps/generators/pps_gen_parport.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pps/clients/pps_parport.c b/drivers/pps/clients/pps_parport.c
index 32221ef..c571d6d 100644
--- a/drivers/pps/clients/pps_parport.c
+++ b/drivers/pps/clients/pps_parport.c
@@ -163,7 +163,7 @@ static void parport_attach(struct parport *port)
}
device->pardev = parport_register_device(port, KBUILD_MODNAME,
- NULL, NULL, parport_irq, 0, device);
+ NULL, NULL, parport_irq, PARPORT_FLAG_EXCL, device);
if (!device->pardev) {
pr_err("couldn't register with %s\n", port->name);
goto err_free;
diff --git a/drivers/pps/generators/pps_gen_parport.c b/drivers/pps/generators/pps_gen_parport.c
index 5c32f8d..b93af3e 100644
--- a/drivers/pps/generators/pps_gen_parport.c
+++ b/drivers/pps/generators/pps_gen_parport.c
@@ -198,7 +198,7 @@ static void parport_attach(struct parport *port)
}
device.pardev = parport_register_device(port, KBUILD_MODNAME,
- NULL, NULL, NULL, 0, &device);
+ NULL, NULL, NULL, PARPORT_FLAG_EXCL, &device);
if (!device.pardev) {
pr_err("couldn't register with %s\n", port->name);
return;
--
1.7.2.3
^ permalink raw reply related [flat|nested] 69+ messages in thread
* Re: [PATCH] pps: claim parallel port exclusively
2011-01-24 23:46 ` [PATCH] pps: claim parallel port exclusively Alexander Gordeev
@ 2011-01-25 0:19 ` Ingo Molnar
0 siblings, 0 replies; 69+ messages in thread
From: Ingo Molnar @ 2011-01-25 0:19 UTC (permalink / raw)
To: Alexander Gordeev
Cc: Linus Torvalds, Andrew Morton, Linux Kernel Mailing List,
Thomas Gleixner
* Alexander Gordeev <lasaine@lvk.cs.msu.su> wrote:
> Both pps_parport and pps_gen_parport are written in a way that they
> can't share a port with any other driver. This can result in locking up
> the process that loads modules or even the whole kernel if the modules
> are compiled in. Use PARPORT_FLAG_EXCL to indicate this.
>
> Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Thanks Alexander - i think the bug you fixed here explains the symptoms i was
seeing.
Consider the bug fixed - i'll yell if something else pops up in testing.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 69+ messages in thread
end of thread, other threads:[~2011-01-25 0:19 UTC | newest]
Thread overview: 69+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-01-18 23:54 Linux 2.6.38-rc1 Linus Torvalds
2011-01-19 2:07 ` Linus Torvalds
2011-01-19 3:42 ` Justin Mattock
2011-01-19 3:53 ` Linus Torvalds
2011-01-19 4:05 ` Justin Mattock
2011-01-19 5:10 ` nobody
2011-01-19 5:42 ` Linus Torvalds
2011-01-19 5:56 ` Linus Torvalds
2011-01-19 18:07 ` Steven Rostedt
2011-01-19 18:26 ` Linus Torvalds
2011-01-21 3:23 ` tag&track [Re: Linux 2.6.38-rc1] nobody
2011-01-21 8:24 ` Alexey Dobriyan
2011-01-23 8:13 ` Linux 2.6.38-rc1 Török Edwin
2011-01-19 7:39 ` Linux 2.6.38-rc1 doesn't boot Markus Trippelsdorf
2011-01-19 7:46 ` Shaohua Li
2011-01-19 7:55 ` Markus Trippelsdorf
2011-01-19 7:49 ` Markus Trippelsdorf
2011-01-19 8:12 ` Shaohua Li
2011-01-19 8:56 ` H. Peter Anvin
2011-01-19 9:09 ` Ingo Molnar
2011-01-20 2:08 ` Shaohua Li
2011-01-20 3:32 ` Lu, Hongjiu
2011-01-20 11:25 ` Ingo Molnar
2011-01-20 15:08 ` Anvin, H Peter
2011-01-21 7:18 ` Shaohua Li
2011-01-21 7:55 ` Shaohua Li
2011-01-21 15:28 ` H. Peter Anvin
2011-01-21 15:37 ` Lu, Hongjiu
2011-01-21 21:09 ` Ingo Molnar
2011-01-19 9:33 ` [tip:x86/urgent] Revert "x86: Make relocatable kernel work with new binutils" tip-bot for Ingo Molnar
2011-01-20 4:59 ` Linux 2.6.38-rc1 doesn't boot Alexandre Courbot
2011-01-19 8:39 ` PPS parport boot lockup: INFO: HARDIRQ-READ-safe -> HARDIRQ-READ-unsafe lock order detected Ingo Molnar
2011-01-20 13:04 ` Alexander Gordeev
2011-01-21 14:44 ` Alexander Gordeev
2011-01-21 16:37 ` Linus Torvalds
2011-01-21 19:43 ` Ingo Molnar
2011-01-24 23:28 ` Alexander Gordeev
2011-01-24 23:46 ` [PATCH] pps: claim parallel port exclusively Alexander Gordeev
2011-01-25 0:19 ` Ingo Molnar
2011-01-24 15:00 ` PPS parport boot lockup: INFO: HARDIRQ-READ-safe -> HARDIRQ-READ-unsafe lock order detected Alexander Gordeev
2011-01-24 15:12 ` [PATCH] parport: make lockdep happy with waitlist_lock Alexander Gordeev
2011-01-24 15:28 ` Ingo Molnar
2011-01-24 15:33 ` Alexander Gordeev
2011-01-19 12:02 ` percpu related boot crash on x86 (was: Linux 2.6.38-rc1) Ingo Molnar
2011-01-19 12:44 ` Tejun Heo
2011-01-19 12:48 ` Peter Zijlstra
2011-01-19 12:56 ` Pekka Enberg
2011-01-19 13:12 ` Peter Zijlstra
2011-01-19 13:13 ` Tejun Heo
2011-01-19 20:53 ` Ingo Molnar
2011-01-19 23:11 ` Ingo Molnar
2011-01-20 8:31 ` percpu related boot crash on x86 Pekka Enberg
2011-01-20 10:47 ` Peter Zijlstra
2011-01-20 11:12 ` Eric Dumazet
2011-01-20 11:19 ` Tejun Heo
2011-01-20 11:06 ` [PATCH 1/2] lockdep: move early boot local IRQ enable/disable status to init/main.c Tejun Heo
2011-01-20 11:07 ` [PATCH 2/2] smp: allow on_each_cpu() to be called while early_boot_irqs_disabled " Tejun Heo
2011-01-20 20:22 ` [tip:core/urgent] smp: Allow " tip-bot for Tejun Heo
2011-01-20 11:11 ` [PATCH 1/2] lockdep: move early boot local IRQ enable/disable " Tejun Heo
2011-01-20 11:23 ` Peter Zijlstra
2011-01-20 11:26 ` Tejun Heo
2011-01-20 11:30 ` Pekka Enberg
2011-01-20 11:38 ` Peter Zijlstra
2011-01-20 12:00 ` Ingo Molnar
2011-01-20 12:20 ` [PATCH UPDATED " Tejun Heo
2011-01-20 11:51 ` [PATCH " Ingo Molnar
2011-01-20 20:21 ` [tip:core/urgent] lockdep: Move " tip-bot for Tejun Heo
2011-01-19 21:40 ` Linux 2.6.38-rc1 Alan Cox
2011-01-21 15:30 ` Aaro Koskinen
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.