* [PATCH 1/4] ARM i.MX23/28: deobfuscate gpio initialization
2011-01-27 11:40 some i.MX23/28 patches Sascha Hauer
@ 2011-01-27 11:40 ` Sascha Hauer
2011-01-27 11:40 ` [PATCH 2/4] ARM i.MX23/28: do not use complicated macros if not necessary Sascha Hauer
` (5 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Sascha Hauer @ 2011-01-27 11:40 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-mxs/gpio.c | 19 ++++++++++---------
1 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c
index d7ad7a6..36df2d7 100644
--- a/arch/arm/mach-mxs/gpio.c
+++ b/arch/arm/mach-mxs/gpio.c
@@ -297,20 +297,17 @@ int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt)
.virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32, \
}
-#define DEFINE_REGISTER_FUNCTION(prefix) \
-int __init prefix ## _register_gpios(void) \
-{ \
- return mxs_gpio_init(prefix ## _gpio_ports, \
- ARRAY_SIZE(prefix ## _gpio_ports)); \
-}
-
#ifdef CONFIG_SOC_IMX23
static struct mxs_gpio_port mx23_gpio_ports[] = {
DEFINE_MXS_GPIO_PORT(MX23, 0),
DEFINE_MXS_GPIO_PORT(MX23, 1),
DEFINE_MXS_GPIO_PORT(MX23, 2),
};
-DEFINE_REGISTER_FUNCTION(mx23)
+
+int __init mx23_register_gpios(void)
+{
+ return mxs_gpio_init(mx23_gpio_ports, ARRAY_SIZE(mx23_gpio_ports));
+}
#endif
#ifdef CONFIG_SOC_IMX28
@@ -321,5 +318,9 @@ static struct mxs_gpio_port mx28_gpio_ports[] = {
DEFINE_MXS_GPIO_PORT(MX28, 3),
DEFINE_MXS_GPIO_PORT(MX28, 4),
};
-DEFINE_REGISTER_FUNCTION(mx28)
+
+int __init mx28_register_gpios(void)
+{
+ return mxs_gpio_init(mx28_gpio_ports, ARRAY_SIZE(mx28_gpio_ports));
+}
#endif
--
1.7.2.3
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 2/4] ARM i.MX23/28: do not use complicated macros if not necessary
2011-01-27 11:40 some i.MX23/28 patches Sascha Hauer
2011-01-27 11:40 ` [PATCH 1/4] ARM i.MX23/28: deobfuscate gpio initialization Sascha Hauer
@ 2011-01-27 11:40 ` Sascha Hauer
2011-01-27 11:40 ` [PATCH 3/4] ARM i.MX23: remove reserved register defines Sascha Hauer
` (4 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Sascha Hauer @ 2011-01-27 11:40 UTC (permalink / raw)
To: linux-arm-kernel
Get rid of ## preprocessor construct where it only makes the
code harder to read.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-mxs/gpio.c | 26 ++++++++++++++------------
1 files changed, 14 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c
index 36df2d7..8bcb340 100644
--- a/arch/arm/mach-mxs/gpio.c
+++ b/arch/arm/mach-mxs/gpio.c
@@ -287,21 +287,23 @@ int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt)
return 0;
}
-#define DEFINE_MXS_GPIO_PORT(soc, _id) \
+#define MX23_GPIO_BASE MX23_IO_ADDRESS(MX23_PINCTRL_BASE_ADDR)
+#define MX28_GPIO_BASE MX28_IO_ADDRESS(MX28_PINCTRL_BASE_ADDR)
+
+#define DEFINE_MXS_GPIO_PORT(_base, _irq, _id) \
{ \
.chip.label = "gpio-" #_id, \
.id = _id, \
- .irq = soc ## _INT_GPIO ## _id, \
- .base = soc ## _IO_ADDRESS( \
- soc ## _PINCTRL ## _BASE_ADDR), \
+ .irq = _irq, \
+ .base = _base, \
.virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32, \
}
#ifdef CONFIG_SOC_IMX23
static struct mxs_gpio_port mx23_gpio_ports[] = {
- DEFINE_MXS_GPIO_PORT(MX23, 0),
- DEFINE_MXS_GPIO_PORT(MX23, 1),
- DEFINE_MXS_GPIO_PORT(MX23, 2),
+ DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO0, 0),
+ DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO1, 1),
+ DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO2, 2),
};
int __init mx23_register_gpios(void)
@@ -312,11 +314,11 @@ int __init mx23_register_gpios(void)
#ifdef CONFIG_SOC_IMX28
static struct mxs_gpio_port mx28_gpio_ports[] = {
- DEFINE_MXS_GPIO_PORT(MX28, 0),
- DEFINE_MXS_GPIO_PORT(MX28, 1),
- DEFINE_MXS_GPIO_PORT(MX28, 2),
- DEFINE_MXS_GPIO_PORT(MX28, 3),
- DEFINE_MXS_GPIO_PORT(MX28, 4),
+ DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO0, 0),
+ DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO1, 1),
+ DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO2, 2),
+ DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO3, 3),
+ DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO4, 4),
};
int __init mx28_register_gpios(void)
--
1.7.2.3
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 3/4] ARM i.MX23: remove reserved register defines
2011-01-27 11:40 some i.MX23/28 patches Sascha Hauer
2011-01-27 11:40 ` [PATCH 1/4] ARM i.MX23/28: deobfuscate gpio initialization Sascha Hauer
2011-01-27 11:40 ` [PATCH 2/4] ARM i.MX23/28: do not use complicated macros if not necessary Sascha Hauer
@ 2011-01-27 11:40 ` Sascha Hauer
2011-01-27 11:40 ` [PATCH 4/4] ARM i.MX28: " Sascha Hauer
` (3 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Sascha Hauer @ 2011-01-27 11:40 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-mxs/regs-clkctrl-mx23.h | 124 ---------------------------------
1 files changed, 0 insertions(+), 124 deletions(-)
diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx23.h b/arch/arm/mach-mxs/regs-clkctrl-mx23.h
index dbc0474..0ea5c9d 100644
--- a/arch/arm/mach-mxs/regs-clkctrl-mx23.h
+++ b/arch/arm/mach-mxs/regs-clkctrl-mx23.h
@@ -33,10 +33,6 @@
#define HW_CLKCTRL_PLLCTRL0_CLR (0x00000008)
#define HW_CLKCTRL_PLLCTRL0_TOG (0x0000000c)
-#define BP_CLKCTRL_PLLCTRL0_RSRVD6 30
-#define BM_CLKCTRL_PLLCTRL0_RSRVD6 0xC0000000
-#define BF_CLKCTRL_PLLCTRL0_RSRVD6(v) \
- (((v) << 30) & BM_CLKCTRL_PLLCTRL0_RSRVD6)
#define BP_CLKCTRL_PLLCTRL0_LFR_SEL 28
#define BM_CLKCTRL_PLLCTRL0_LFR_SEL 0x30000000
#define BF_CLKCTRL_PLLCTRL0_LFR_SEL(v) \
@@ -45,10 +41,6 @@
#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_2 0x1
#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_05 0x2
#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLLCTRL0_RSRVD5 26
-#define BM_CLKCTRL_PLLCTRL0_RSRVD5 0x0C000000
-#define BF_CLKCTRL_PLLCTRL0_RSRVD5(v) \
- (((v) << 26) & BM_CLKCTRL_PLLCTRL0_RSRVD5)
#define BP_CLKCTRL_PLLCTRL0_CP_SEL 24
#define BM_CLKCTRL_PLLCTRL0_CP_SEL 0x03000000
#define BF_CLKCTRL_PLLCTRL0_CP_SEL(v) \
@@ -57,10 +49,6 @@
#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_2 0x1
#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_05 0x2
#define BV_CLKCTRL_PLLCTRL0_CP_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLLCTRL0_RSRVD4 22
-#define BM_CLKCTRL_PLLCTRL0_RSRVD4 0x00C00000
-#define BF_CLKCTRL_PLLCTRL0_RSRVD4(v) \
- (((v) << 22) & BM_CLKCTRL_PLLCTRL0_RSRVD4)
#define BP_CLKCTRL_PLLCTRL0_DIV_SEL 20
#define BM_CLKCTRL_PLLCTRL0_DIV_SEL 0x00300000
#define BF_CLKCTRL_PLLCTRL0_DIV_SEL(v) \
@@ -69,23 +57,13 @@
#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWER 0x1
#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWEST 0x2
#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_PLLCTRL0_RSRVD3 0x00080000
#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000
-#define BM_CLKCTRL_PLLCTRL0_RSRVD2 0x00020000
#define BM_CLKCTRL_PLLCTRL0_POWER 0x00010000
-#define BP_CLKCTRL_PLLCTRL0_RSRVD1 0
-#define BM_CLKCTRL_PLLCTRL0_RSRVD1 0x0000FFFF
-#define BF_CLKCTRL_PLLCTRL0_RSRVD1(v) \
- (((v) << 0) & BM_CLKCTRL_PLLCTRL0_RSRVD1)
#define HW_CLKCTRL_PLLCTRL1 (0x00000010)
#define BM_CLKCTRL_PLLCTRL1_LOCK 0x80000000
#define BM_CLKCTRL_PLLCTRL1_FORCE_LOCK 0x40000000
-#define BP_CLKCTRL_PLLCTRL1_RSRVD1 16
-#define BM_CLKCTRL_PLLCTRL1_RSRVD1 0x3FFF0000
-#define BF_CLKCTRL_PLLCTRL1_RSRVD1(v) \
- (((v) << 16) & BM_CLKCTRL_PLLCTRL1_RSRVD1)
#define BP_CLKCTRL_PLLCTRL1_LOCK_COUNT 0
#define BM_CLKCTRL_PLLCTRL1_LOCK_COUNT 0x0000FFFF
#define BF_CLKCTRL_PLLCTRL1_LOCK_COUNT(v) \
@@ -96,29 +74,15 @@
#define HW_CLKCTRL_CPU_CLR (0x00000028)
#define HW_CLKCTRL_CPU_TOG (0x0000002c)
-#define BP_CLKCTRL_CPU_RSRVD5 30
-#define BM_CLKCTRL_CPU_RSRVD5 0xC0000000
-#define BF_CLKCTRL_CPU_RSRVD5(v) \
- (((v) << 30) & BM_CLKCTRL_CPU_RSRVD5)
#define BM_CLKCTRL_CPU_BUSY_REF_XTAL 0x20000000
#define BM_CLKCTRL_CPU_BUSY_REF_CPU 0x10000000
-#define BM_CLKCTRL_CPU_RSRVD4 0x08000000
#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN 0x04000000
#define BP_CLKCTRL_CPU_DIV_XTAL 16
#define BM_CLKCTRL_CPU_DIV_XTAL 0x03FF0000
#define BF_CLKCTRL_CPU_DIV_XTAL(v) \
(((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL)
-#define BP_CLKCTRL_CPU_RSRVD3 13
-#define BM_CLKCTRL_CPU_RSRVD3 0x0000E000
-#define BF_CLKCTRL_CPU_RSRVD3(v) \
- (((v) << 13) & BM_CLKCTRL_CPU_RSRVD3)
#define BM_CLKCTRL_CPU_INTERRUPT_WAIT 0x00001000
-#define BM_CLKCTRL_CPU_RSRVD2 0x00000800
#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN 0x00000400
-#define BP_CLKCTRL_CPU_RSRVD1 6
-#define BM_CLKCTRL_CPU_RSRVD1 0x000003C0
-#define BF_CLKCTRL_CPU_RSRVD1(v) \
- (((v) << 6) & BM_CLKCTRL_CPU_RSRVD1)
#define BP_CLKCTRL_CPU_DIV_CPU 0
#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F
#define BF_CLKCTRL_CPU_DIV_CPU(v) \
@@ -129,10 +93,6 @@
#define HW_CLKCTRL_HBUS_CLR (0x00000038)
#define HW_CLKCTRL_HBUS_TOG (0x0000003c)
-#define BP_CLKCTRL_HBUS_RSRVD4 30
-#define BM_CLKCTRL_HBUS_RSRVD4 0xC0000000
-#define BF_CLKCTRL_HBUS_RSRVD4(v) \
- (((v) << 30) & BM_CLKCTRL_HBUS_RSRVD4)
#define BM_CLKCTRL_HBUS_BUSY 0x20000000
#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE 0x10000000
#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE 0x08000000
@@ -143,7 +103,6 @@
#define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE 0x00400000
#define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE 0x00200000
#define BM_CLKCTRL_HBUS_AUTO_SLOW_MODE 0x00100000
-#define BM_CLKCTRL_HBUS_RSRVD2 0x00080000
#define BP_CLKCTRL_HBUS_SLOW_DIV 16
#define BM_CLKCTRL_HBUS_SLOW_DIV 0x00070000
#define BF_CLKCTRL_HBUS_SLOW_DIV(v) \
@@ -154,10 +113,6 @@
#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8 0x3
#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4
#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5
-#define BP_CLKCTRL_HBUS_RSRVD1 6
-#define BM_CLKCTRL_HBUS_RSRVD1 0x0000FFC0
-#define BF_CLKCTRL_HBUS_RSRVD1(v) \
- (((v) << 6) & BM_CLKCTRL_HBUS_RSRVD1)
#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020
#define BP_CLKCTRL_HBUS_DIV 0
#define BM_CLKCTRL_HBUS_DIV 0x0000001F
@@ -167,10 +122,6 @@
#define HW_CLKCTRL_XBUS (0x00000040)
#define BM_CLKCTRL_XBUS_BUSY 0x80000000
-#define BP_CLKCTRL_XBUS_RSRVD1 11
-#define BM_CLKCTRL_XBUS_RSRVD1 0x7FFFF800
-#define BF_CLKCTRL_XBUS_RSRVD1(v) \
- (((v) << 11) & BM_CLKCTRL_XBUS_RSRVD1)
#define BM_CLKCTRL_XBUS_DIV_FRAC_EN 0x00000400
#define BP_CLKCTRL_XBUS_DIV 0
#define BM_CLKCTRL_XBUS_DIV 0x000003FF
@@ -192,10 +143,6 @@
#define BM_CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE 0x08000000
#define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 26
#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 0x04000000
-#define BP_CLKCTRL_XTAL_RSRVD1 2
-#define BM_CLKCTRL_XTAL_RSRVD1 0x03FFFFFC
-#define BF_CLKCTRL_XTAL_RSRVD1(v) \
- (((v) << 2) & BM_CLKCTRL_XTAL_RSRVD1)
#define BP_CLKCTRL_XTAL_DIV_UART 0
#define BM_CLKCTRL_XTAL_DIV_UART 0x00000003
#define BF_CLKCTRL_XTAL_DIV_UART(v) \
@@ -205,12 +152,7 @@
#define BP_CLKCTRL_PIX_CLKGATE 31
#define BM_CLKCTRL_PIX_CLKGATE 0x80000000
-#define BM_CLKCTRL_PIX_RSRVD2 0x40000000
#define BM_CLKCTRL_PIX_BUSY 0x20000000
-#define BP_CLKCTRL_PIX_RSRVD1 13
-#define BM_CLKCTRL_PIX_RSRVD1 0x1FFFE000
-#define BF_CLKCTRL_PIX_RSRVD1(v) \
- (((v) << 13) & BM_CLKCTRL_PIX_RSRVD1)
#define BM_CLKCTRL_PIX_DIV_FRAC_EN 0x00001000
#define BP_CLKCTRL_PIX_DIV 0
#define BM_CLKCTRL_PIX_DIV 0x00000FFF
@@ -221,12 +163,7 @@
#define BP_CLKCTRL_SSP_CLKGATE 31
#define BM_CLKCTRL_SSP_CLKGATE 0x80000000
-#define BM_CLKCTRL_SSP_RSRVD2 0x40000000
#define BM_CLKCTRL_SSP_BUSY 0x20000000
-#define BP_CLKCTRL_SSP_RSRVD1 10
-#define BM_CLKCTRL_SSP_RSRVD1 0x1FFFFC00
-#define BF_CLKCTRL_SSP_RSRVD1(v) \
- (((v) << 10) & BM_CLKCTRL_SSP_RSRVD1)
#define BM_CLKCTRL_SSP_DIV_FRAC_EN 0x00000200
#define BP_CLKCTRL_SSP_DIV 0
#define BM_CLKCTRL_SSP_DIV 0x000001FF
@@ -237,12 +174,7 @@
#define BP_CLKCTRL_GPMI_CLKGATE 31
#define BM_CLKCTRL_GPMI_CLKGATE 0x80000000
-#define BM_CLKCTRL_GPMI_RSRVD2 0x40000000
#define BM_CLKCTRL_GPMI_BUSY 0x20000000
-#define BP_CLKCTRL_GPMI_RSRVD1 11
-#define BM_CLKCTRL_GPMI_RSRVD1 0x1FFFF800
-#define BF_CLKCTRL_GPMI_RSRVD1(v) \
- (((v) << 11) & BM_CLKCTRL_GPMI_RSRVD1)
#define BM_CLKCTRL_GPMI_DIV_FRAC_EN 0x00000400
#define BP_CLKCTRL_GPMI_DIV 0
#define BM_CLKCTRL_GPMI_DIV 0x000003FF
@@ -252,10 +184,6 @@
#define HW_CLKCTRL_SPDIF (0x00000090)
#define BM_CLKCTRL_SPDIF_CLKGATE 0x80000000
-#define BP_CLKCTRL_SPDIF_RSRVD 0
-#define BM_CLKCTRL_SPDIF_RSRVD 0x7FFFFFFF
-#define BF_CLKCTRL_SPDIF_RSRVD(v) \
- (((v) << 0) & BM_CLKCTRL_SPDIF_RSRVD)
#define HW_CLKCTRL_EMI (0x000000a0)
@@ -266,24 +194,12 @@
#define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000
#define BM_CLKCTRL_EMI_BUSY_REF_CPU 0x08000000
#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE 0x04000000
-#define BP_CLKCTRL_EMI_RSRVD3 18
-#define BM_CLKCTRL_EMI_RSRVD3 0x03FC0000
-#define BF_CLKCTRL_EMI_RSRVD3(v) \
- (((v) << 18) & BM_CLKCTRL_EMI_RSRVD3)
#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000
#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000
-#define BP_CLKCTRL_EMI_RSRVD2 12
-#define BM_CLKCTRL_EMI_RSRVD2 0x0000F000
-#define BF_CLKCTRL_EMI_RSRVD2(v) \
- (((v) << 12) & BM_CLKCTRL_EMI_RSRVD2)
#define BP_CLKCTRL_EMI_DIV_XTAL 8
#define BM_CLKCTRL_EMI_DIV_XTAL 0x00000F00
#define BF_CLKCTRL_EMI_DIV_XTAL(v) \
(((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL)
-#define BP_CLKCTRL_EMI_RSRVD1 6
-#define BM_CLKCTRL_EMI_RSRVD1 0x000000C0
-#define BF_CLKCTRL_EMI_RSRVD1(v) \
- (((v) << 6) & BM_CLKCTRL_EMI_RSRVD1)
#define BP_CLKCTRL_EMI_DIV_EMI 0
#define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F
#define BF_CLKCTRL_EMI_DIV_EMI(v) \
@@ -292,22 +208,13 @@
#define HW_CLKCTRL_IR (0x000000b0)
#define BM_CLKCTRL_IR_CLKGATE 0x80000000
-#define BM_CLKCTRL_IR_RSRVD3 0x40000000
#define BM_CLKCTRL_IR_AUTO_DIV 0x20000000
#define BM_CLKCTRL_IR_IR_BUSY 0x10000000
#define BM_CLKCTRL_IR_IROV_BUSY 0x08000000
-#define BP_CLKCTRL_IR_RSRVD2 25
-#define BM_CLKCTRL_IR_RSRVD2 0x06000000
-#define BF_CLKCTRL_IR_RSRVD2(v) \
- (((v) << 25) & BM_CLKCTRL_IR_RSRVD2)
#define BP_CLKCTRL_IR_IROV_DIV 16
#define BM_CLKCTRL_IR_IROV_DIV 0x01FF0000
#define BF_CLKCTRL_IR_IROV_DIV(v) \
(((v) << 16) & BM_CLKCTRL_IR_IROV_DIV)
-#define BP_CLKCTRL_IR_RSRVD1 10
-#define BM_CLKCTRL_IR_RSRVD1 0x0000FC00
-#define BF_CLKCTRL_IR_RSRVD1(v) \
- (((v) << 10) & BM_CLKCTRL_IR_RSRVD1)
#define BP_CLKCTRL_IR_IR_DIV 0
#define BM_CLKCTRL_IR_IR_DIV 0x000003FF
#define BF_CLKCTRL_IR_IR_DIV(v) \
@@ -316,12 +223,7 @@
#define HW_CLKCTRL_SAIF (0x000000c0)
#define BM_CLKCTRL_SAIF_CLKGATE 0x80000000
-#define BM_CLKCTRL_SAIF_RSRVD2 0x40000000
#define BM_CLKCTRL_SAIF_BUSY 0x20000000
-#define BP_CLKCTRL_SAIF_RSRVD1 17
-#define BM_CLKCTRL_SAIF_RSRVD1 0x1FFE0000
-#define BF_CLKCTRL_SAIF_RSRVD1(v) \
- (((v) << 17) & BM_CLKCTRL_SAIF_RSRVD1)
#define BM_CLKCTRL_SAIF_DIV_FRAC_EN 0x00010000
#define BP_CLKCTRL_SAIF_DIV 0
#define BM_CLKCTRL_SAIF_DIV 0x0000FFFF
@@ -332,20 +234,11 @@
#define BM_CLKCTRL_TV_CLK_TV108M_GATE 0x80000000
#define BM_CLKCTRL_TV_CLK_TV_GATE 0x40000000
-#define BP_CLKCTRL_TV_RSRVD 0
-#define BM_CLKCTRL_TV_RSRVD 0x3FFFFFFF
-#define BF_CLKCTRL_TV_RSRVD(v) \
- (((v) << 0) & BM_CLKCTRL_TV_RSRVD)
#define HW_CLKCTRL_ETM (0x000000e0)
#define BM_CLKCTRL_ETM_CLKGATE 0x80000000
-#define BM_CLKCTRL_ETM_RSRVD2 0x40000000
#define BM_CLKCTRL_ETM_BUSY 0x20000000
-#define BP_CLKCTRL_ETM_RSRVD1 7
-#define BM_CLKCTRL_ETM_RSRVD1 0x1FFFFF80
-#define BF_CLKCTRL_ETM_RSRVD1(v) \
- (((v) << 7) & BM_CLKCTRL_ETM_RSRVD1)
#define BM_CLKCTRL_ETM_DIV_FRAC_EN 0x00000040
#define BP_CLKCTRL_ETM_DIV 0
#define BM_CLKCTRL_ETM_DIV 0x0000003F
@@ -393,36 +286,23 @@
#define BM_CLKCTRL_FRAC1_CLKGATEVID 0x80000000
#define BM_CLKCTRL_FRAC1_VID_STABLE 0x40000000
-#define BP_CLKCTRL_FRAC1_RSRVD1 0
-#define BM_CLKCTRL_FRAC1_RSRVD1 0x3FFFFFFF
-#define BF_CLKCTRL_FRAC1_RSRVD1(v) \
- (((v) << 0) & BM_CLKCTRL_FRAC1_RSRVD1)
#define HW_CLKCTRL_CLKSEQ (0x00000110)
#define HW_CLKCTRL_CLKSEQ_SET (0x00000114)
#define HW_CLKCTRL_CLKSEQ_CLR (0x00000118)
#define HW_CLKCTRL_CLKSEQ_TOG (0x0000011c)
-#define BP_CLKCTRL_CLKSEQ_RSRVD1 9
-#define BM_CLKCTRL_CLKSEQ_RSRVD1 0xFFFFFE00
-#define BF_CLKCTRL_CLKSEQ_RSRVD1(v) \
- (((v) << 9) & BM_CLKCTRL_CLKSEQ_RSRVD1)
#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM 0x00000100
#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU 0x00000080
#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI 0x00000040
#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP 0x00000020
#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI 0x00000010
#define BM_CLKCTRL_CLKSEQ_BYPASS_IR 0x00000008
-#define BM_CLKCTRL_CLKSEQ_RSRVD0 0x00000004
#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002
#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF 0x00000001
#define HW_CLKCTRL_RESET (0x00000120)
-#define BP_CLKCTRL_RESET_RSRVD 2
-#define BM_CLKCTRL_RESET_RSRVD 0xFFFFFFFC
-#define BF_CLKCTRL_RESET_RSRVD(v) \
- (((v) << 2) & BM_CLKCTRL_RESET_RSRVD)
#define BM_CLKCTRL_RESET_CHIP 0x00000002
#define BM_CLKCTRL_RESET_DIG 0x00000001
@@ -432,10 +312,6 @@
#define BM_CLKCTRL_STATUS_CPU_LIMIT 0xC0000000
#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \
(((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT)
-#define BP_CLKCTRL_STATUS_RSRVD 0
-#define BM_CLKCTRL_STATUS_RSRVD 0x3FFFFFFF
-#define BF_CLKCTRL_STATUS_RSRVD(v) \
- (((v) << 0) & BM_CLKCTRL_STATUS_RSRVD)
#define HW_CLKCTRL_VERSION (0x00000140)
--
1.7.2.3
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 4/4] ARM i.MX28: remove reserved register defines
2011-01-27 11:40 some i.MX23/28 patches Sascha Hauer
` (2 preceding siblings ...)
2011-01-27 11:40 ` [PATCH 3/4] ARM i.MX23: remove reserved register defines Sascha Hauer
@ 2011-01-27 11:40 ` Sascha Hauer
2011-01-27 13:15 ` some i.MX23/28 patches Sergei Shtylyov
` (2 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Sascha Hauer @ 2011-01-27 11:40 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-mxs/regs-clkctrl-mx28.h | 177 ---------------------------------
1 files changed, 0 insertions(+), 177 deletions(-)
diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx28.h b/arch/arm/mach-mxs/regs-clkctrl-mx28.h
index 661df18..7d1b061 100644
--- a/arch/arm/mach-mxs/regs-clkctrl-mx28.h
+++ b/arch/arm/mach-mxs/regs-clkctrl-mx28.h
@@ -31,10 +31,6 @@
#define HW_CLKCTRL_PLL0CTRL0_CLR (0x00000008)
#define HW_CLKCTRL_PLL0CTRL0_TOG (0x0000000c)
-#define BP_CLKCTRL_PLL0CTRL0_RSRVD6 30
-#define BM_CLKCTRL_PLL0CTRL0_RSRVD6 0xC0000000
-#define BF_CLKCTRL_PLL0CTRL0_RSRVD6(v) \
- (((v) << 30) & BM_CLKCTRL_PLL0CTRL0_RSRVD6)
#define BP_CLKCTRL_PLL0CTRL0_LFR_SEL 28
#define BM_CLKCTRL_PLL0CTRL0_LFR_SEL 0x30000000
#define BF_CLKCTRL_PLL0CTRL0_LFR_SEL(v) \
@@ -43,10 +39,6 @@
#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_2 0x1
#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_05 0x2
#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL0CTRL0_RSRVD5 26
-#define BM_CLKCTRL_PLL0CTRL0_RSRVD5 0x0C000000
-#define BF_CLKCTRL_PLL0CTRL0_RSRVD5(v) \
- (((v) << 26) & BM_CLKCTRL_PLL0CTRL0_RSRVD5)
#define BP_CLKCTRL_PLL0CTRL0_CP_SEL 24
#define BM_CLKCTRL_PLL0CTRL0_CP_SEL 0x03000000
#define BF_CLKCTRL_PLL0CTRL0_CP_SEL(v) \
@@ -55,10 +47,6 @@
#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_2 0x1
#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_05 0x2
#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL0CTRL0_RSRVD4 22
-#define BM_CLKCTRL_PLL0CTRL0_RSRVD4 0x00C00000
-#define BF_CLKCTRL_PLL0CTRL0_RSRVD4(v) \
- (((v) << 22) & BM_CLKCTRL_PLL0CTRL0_RSRVD4)
#define BP_CLKCTRL_PLL0CTRL0_DIV_SEL 20
#define BM_CLKCTRL_PLL0CTRL0_DIV_SEL 0x00300000
#define BF_CLKCTRL_PLL0CTRL0_DIV_SEL(v) \
@@ -67,22 +55,13 @@
#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWER 0x1
#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWEST 0x2
#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_PLL0CTRL0_RSRVD3 0x00080000
#define BM_CLKCTRL_PLL0CTRL0_EN_USB_CLKS 0x00040000
#define BM_CLKCTRL_PLL0CTRL0_POWER 0x00020000
-#define BP_CLKCTRL_PLL0CTRL0_RSRVD1 0
-#define BM_CLKCTRL_PLL0CTRL0_RSRVD1 0x0001FFFF
-#define BF_CLKCTRL_PLL0CTRL0_RSRVD1(v) \
- (((v) << 0) & BM_CLKCTRL_PLL0CTRL0_RSRVD1)
#define HW_CLKCTRL_PLL0CTRL1 (0x00000010)
#define BM_CLKCTRL_PLL0CTRL1_LOCK 0x80000000
#define BM_CLKCTRL_PLL0CTRL1_FORCE_LOCK 0x40000000
-#define BP_CLKCTRL_PLL0CTRL1_RSRVD1 16
-#define BM_CLKCTRL_PLL0CTRL1_RSRVD1 0x3FFF0000
-#define BF_CLKCTRL_PLL0CTRL1_RSRVD1(v) \
- (((v) << 16) & BM_CLKCTRL_PLL0CTRL1_RSRVD1)
#define BP_CLKCTRL_PLL0CTRL1_LOCK_COUNT 0
#define BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT 0x0000FFFF
#define BF_CLKCTRL_PLL0CTRL1_LOCK_COUNT(v) \
@@ -94,7 +73,6 @@
#define HW_CLKCTRL_PLL1CTRL0_TOG (0x0000002c)
#define BM_CLKCTRL_PLL1CTRL0_CLKGATEEMI 0x80000000
-#define BM_CLKCTRL_PLL1CTRL0_RSRVD6 0x40000000
#define BP_CLKCTRL_PLL1CTRL0_LFR_SEL 28
#define BM_CLKCTRL_PLL1CTRL0_LFR_SEL 0x30000000
#define BF_CLKCTRL_PLL1CTRL0_LFR_SEL(v) \
@@ -103,10 +81,6 @@
#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_2 0x1
#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_05 0x2
#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL1CTRL0_RSRVD5 26
-#define BM_CLKCTRL_PLL1CTRL0_RSRVD5 0x0C000000
-#define BF_CLKCTRL_PLL1CTRL0_RSRVD5(v) \
- (((v) << 26) & BM_CLKCTRL_PLL1CTRL0_RSRVD5)
#define BP_CLKCTRL_PLL1CTRL0_CP_SEL 24
#define BM_CLKCTRL_PLL1CTRL0_CP_SEL 0x03000000
#define BF_CLKCTRL_PLL1CTRL0_CP_SEL(v) \
@@ -115,10 +89,6 @@
#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_2 0x1
#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_05 0x2
#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL1CTRL0_RSRVD4 22
-#define BM_CLKCTRL_PLL1CTRL0_RSRVD4 0x00C00000
-#define BF_CLKCTRL_PLL1CTRL0_RSRVD4(v) \
- (((v) << 22) & BM_CLKCTRL_PLL1CTRL0_RSRVD4)
#define BP_CLKCTRL_PLL1CTRL0_DIV_SEL 20
#define BM_CLKCTRL_PLL1CTRL0_DIV_SEL 0x00300000
#define BF_CLKCTRL_PLL1CTRL0_DIV_SEL(v) \
@@ -127,22 +97,13 @@
#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWER 0x1
#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWEST 0x2
#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_PLL1CTRL0_RSRVD3 0x00080000
#define BM_CLKCTRL_PLL1CTRL0_EN_USB_CLKS 0x00040000
#define BM_CLKCTRL_PLL1CTRL0_POWER 0x00020000
-#define BP_CLKCTRL_PLL1CTRL0_RSRVD1 0
-#define BM_CLKCTRL_PLL1CTRL0_RSRVD1 0x0001FFFF
-#define BF_CLKCTRL_PLL1CTRL0_RSRVD1(v) \
- (((v) << 0) & BM_CLKCTRL_PLL1CTRL0_RSRVD1)
#define HW_CLKCTRL_PLL1CTRL1 (0x00000030)
#define BM_CLKCTRL_PLL1CTRL1_LOCK 0x80000000
#define BM_CLKCTRL_PLL1CTRL1_FORCE_LOCK 0x40000000
-#define BP_CLKCTRL_PLL1CTRL1_RSRVD1 16
-#define BM_CLKCTRL_PLL1CTRL1_RSRVD1 0x3FFF0000
-#define BF_CLKCTRL_PLL1CTRL1_RSRVD1(v) \
- (((v) << 16) & BM_CLKCTRL_PLL1CTRL1_RSRVD1)
#define BP_CLKCTRL_PLL1CTRL1_LOCK_COUNT 0
#define BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT 0x0000FFFF
#define BF_CLKCTRL_PLL1CTRL1_LOCK_COUNT(v) \
@@ -154,51 +115,31 @@
#define HW_CLKCTRL_PLL2CTRL0_TOG (0x0000004c)
#define BM_CLKCTRL_PLL2CTRL0_CLKGATE 0x80000000
-#define BM_CLKCTRL_PLL2CTRL0_RSRVD3 0x40000000
#define BP_CLKCTRL_PLL2CTRL0_LFR_SEL 28
#define BM_CLKCTRL_PLL2CTRL0_LFR_SEL 0x30000000
#define BF_CLKCTRL_PLL2CTRL0_LFR_SEL(v) \
(((v) << 28) & BM_CLKCTRL_PLL2CTRL0_LFR_SEL)
-#define BM_CLKCTRL_PLL2CTRL0_RSRVD2 0x08000000
#define BM_CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B 0x04000000
#define BP_CLKCTRL_PLL2CTRL0_CP_SEL 24
#define BM_CLKCTRL_PLL2CTRL0_CP_SEL 0x03000000
#define BF_CLKCTRL_PLL2CTRL0_CP_SEL(v) \
(((v) << 24) & BM_CLKCTRL_PLL2CTRL0_CP_SEL)
#define BM_CLKCTRL_PLL2CTRL0_POWER 0x00800000
-#define BP_CLKCTRL_PLL2CTRL0_RSRVD1 0
-#define BM_CLKCTRL_PLL2CTRL0_RSRVD1 0x007FFFFF
-#define BF_CLKCTRL_PLL2CTRL0_RSRVD1(v) \
- (((v) << 0) & BM_CLKCTRL_PLL2CTRL0_RSRVD1)
#define HW_CLKCTRL_CPU (0x00000050)
#define HW_CLKCTRL_CPU_SET (0x00000054)
#define HW_CLKCTRL_CPU_CLR (0x00000058)
#define HW_CLKCTRL_CPU_TOG (0x0000005c)
-#define BP_CLKCTRL_CPU_RSRVD5 30
-#define BM_CLKCTRL_CPU_RSRVD5 0xC0000000
-#define BF_CLKCTRL_CPU_RSRVD5(v) \
- (((v) << 30) & BM_CLKCTRL_CPU_RSRVD5)
#define BM_CLKCTRL_CPU_BUSY_REF_XTAL 0x20000000
#define BM_CLKCTRL_CPU_BUSY_REF_CPU 0x10000000
-#define BM_CLKCTRL_CPU_RSRVD4 0x08000000
#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN 0x04000000
#define BP_CLKCTRL_CPU_DIV_XTAL 16
#define BM_CLKCTRL_CPU_DIV_XTAL 0x03FF0000
#define BF_CLKCTRL_CPU_DIV_XTAL(v) \
(((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL)
-#define BP_CLKCTRL_CPU_RSRVD3 13
-#define BM_CLKCTRL_CPU_RSRVD3 0x0000E000
-#define BF_CLKCTRL_CPU_RSRVD3(v) \
- (((v) << 13) & BM_CLKCTRL_CPU_RSRVD3)
#define BM_CLKCTRL_CPU_INTERRUPT_WAIT 0x00001000
-#define BM_CLKCTRL_CPU_RSRVD2 0x00000800
#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN 0x00000400
-#define BP_CLKCTRL_CPU_RSRVD1 6
-#define BM_CLKCTRL_CPU_RSRVD1 0x000003C0
-#define BF_CLKCTRL_CPU_RSRVD1(v) \
- (((v) << 6) & BM_CLKCTRL_CPU_RSRVD1)
#define BP_CLKCTRL_CPU_DIV_CPU 0
#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F
#define BF_CLKCTRL_CPU_DIV_CPU(v) \
@@ -212,7 +153,6 @@
#define BM_CLKCTRL_HBUS_ASM_BUSY 0x80000000
#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE 0x40000000
#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE 0x20000000
-#define BM_CLKCTRL_HBUS_RSRVD2 0x10000000
#define BM_CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE 0x08000000
#define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE 0x04000000
#define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE 0x02000000
@@ -232,10 +172,6 @@
#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8 0x3
#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4
#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5
-#define BP_CLKCTRL_HBUS_RSRVD1 6
-#define BM_CLKCTRL_HBUS_RSRVD1 0x0000FFC0
-#define BF_CLKCTRL_HBUS_RSRVD1(v) \
- (((v) << 6) & BM_CLKCTRL_HBUS_RSRVD1)
#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020
#define BP_CLKCTRL_HBUS_DIV 0
#define BM_CLKCTRL_HBUS_DIV 0x0000001F
@@ -245,10 +181,6 @@
#define HW_CLKCTRL_XBUS (0x00000070)
#define BM_CLKCTRL_XBUS_BUSY 0x80000000
-#define BP_CLKCTRL_XBUS_RSRVD1 12
-#define BM_CLKCTRL_XBUS_RSRVD1 0x7FFFF000
-#define BF_CLKCTRL_XBUS_RSRVD1(v) \
- (((v) << 12) & BM_CLKCTRL_XBUS_RSRVD1)
#define BM_CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE 0x00000800
#define BM_CLKCTRL_XBUS_DIV_FRAC_EN 0x00000400
#define BP_CLKCTRL_XBUS_DIV 0
@@ -263,19 +195,10 @@
#define BP_CLKCTRL_XTAL_UART_CLK_GATE 31
#define BM_CLKCTRL_XTAL_UART_CLK_GATE 0x80000000
-#define BM_CLKCTRL_XTAL_RSRVD3 0x40000000
#define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE 29
#define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE 0x20000000
-#define BP_CLKCTRL_XTAL_RSRVD2 27
-#define BM_CLKCTRL_XTAL_RSRVD2 0x18000000
-#define BF_CLKCTRL_XTAL_RSRVD2(v) \
- (((v) << 27) & BM_CLKCTRL_XTAL_RSRVD2)
#define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 26
#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 0x04000000
-#define BP_CLKCTRL_XTAL_RSRVD1 2
-#define BM_CLKCTRL_XTAL_RSRVD1 0x03FFFFFC
-#define BF_CLKCTRL_XTAL_RSRVD1(v) \
- (((v) << 2) & BM_CLKCTRL_XTAL_RSRVD1)
#define BP_CLKCTRL_XTAL_DIV_UART 0
#define BM_CLKCTRL_XTAL_DIV_UART 0x00000003
#define BF_CLKCTRL_XTAL_DIV_UART(v) \
@@ -285,12 +208,7 @@
#define BP_CLKCTRL_SSP0_CLKGATE 31
#define BM_CLKCTRL_SSP0_CLKGATE 0x80000000
-#define BM_CLKCTRL_SSP0_RSRVD2 0x40000000
#define BM_CLKCTRL_SSP0_BUSY 0x20000000
-#define BP_CLKCTRL_SSP0_RSRVD1 10
-#define BM_CLKCTRL_SSP0_RSRVD1 0x1FFFFC00
-#define BF_CLKCTRL_SSP0_RSRVD1(v) \
- (((v) << 10) & BM_CLKCTRL_SSP0_RSRVD1)
#define BM_CLKCTRL_SSP0_DIV_FRAC_EN 0x00000200
#define BP_CLKCTRL_SSP0_DIV 0
#define BM_CLKCTRL_SSP0_DIV 0x000001FF
@@ -301,12 +219,7 @@
#define BP_CLKCTRL_SSP1_CLKGATE 31
#define BM_CLKCTRL_SSP1_CLKGATE 0x80000000
-#define BM_CLKCTRL_SSP1_RSRVD2 0x40000000
#define BM_CLKCTRL_SSP1_BUSY 0x20000000
-#define BP_CLKCTRL_SSP1_RSRVD1 10
-#define BM_CLKCTRL_SSP1_RSRVD1 0x1FFFFC00
-#define BF_CLKCTRL_SSP1_RSRVD1(v) \
- (((v) << 10) & BM_CLKCTRL_SSP1_RSRVD1)
#define BM_CLKCTRL_SSP1_DIV_FRAC_EN 0x00000200
#define BP_CLKCTRL_SSP1_DIV 0
#define BM_CLKCTRL_SSP1_DIV 0x000001FF
@@ -317,12 +230,7 @@
#define BP_CLKCTRL_SSP2_CLKGATE 31
#define BM_CLKCTRL_SSP2_CLKGATE 0x80000000
-#define BM_CLKCTRL_SSP2_RSRVD2 0x40000000
#define BM_CLKCTRL_SSP2_BUSY 0x20000000
-#define BP_CLKCTRL_SSP2_RSRVD1 10
-#define BM_CLKCTRL_SSP2_RSRVD1 0x1FFFFC00
-#define BF_CLKCTRL_SSP2_RSRVD1(v) \
- (((v) << 10) & BM_CLKCTRL_SSP2_RSRVD1)
#define BM_CLKCTRL_SSP2_DIV_FRAC_EN 0x00000200
#define BP_CLKCTRL_SSP2_DIV 0
#define BM_CLKCTRL_SSP2_DIV 0x000001FF
@@ -333,12 +241,7 @@
#define BP_CLKCTRL_SSP3_CLKGATE 31
#define BM_CLKCTRL_SSP3_CLKGATE 0x80000000
-#define BM_CLKCTRL_SSP3_RSRVD2 0x40000000
#define BM_CLKCTRL_SSP3_BUSY 0x20000000
-#define BP_CLKCTRL_SSP3_RSRVD1 10
-#define BM_CLKCTRL_SSP3_RSRVD1 0x1FFFFC00
-#define BF_CLKCTRL_SSP3_RSRVD1(v) \
- (((v) << 10) & BM_CLKCTRL_SSP3_RSRVD1)
#define BM_CLKCTRL_SSP3_DIV_FRAC_EN 0x00000200
#define BP_CLKCTRL_SSP3_DIV 0
#define BM_CLKCTRL_SSP3_DIV 0x000001FF
@@ -349,12 +252,7 @@
#define BP_CLKCTRL_GPMI_CLKGATE 31
#define BM_CLKCTRL_GPMI_CLKGATE 0x80000000
-#define BM_CLKCTRL_GPMI_RSRVD2 0x40000000
#define BM_CLKCTRL_GPMI_BUSY 0x20000000
-#define BP_CLKCTRL_GPMI_RSRVD1 11
-#define BM_CLKCTRL_GPMI_RSRVD1 0x1FFFF800
-#define BF_CLKCTRL_GPMI_RSRVD1(v) \
- (((v) << 11) & BM_CLKCTRL_GPMI_RSRVD1)
#define BM_CLKCTRL_GPMI_DIV_FRAC_EN 0x00000400
#define BP_CLKCTRL_GPMI_DIV 0
#define BM_CLKCTRL_GPMI_DIV 0x000003FF
@@ -365,10 +263,6 @@
#define BP_CLKCTRL_SPDIF_CLKGATE 31
#define BM_CLKCTRL_SPDIF_CLKGATE 0x80000000
-#define BP_CLKCTRL_SPDIF_RSRVD 0
-#define BM_CLKCTRL_SPDIF_RSRVD 0x7FFFFFFF
-#define BF_CLKCTRL_SPDIF_RSRVD(v) \
- (((v) << 0) & BM_CLKCTRL_SPDIF_RSRVD)
#define HW_CLKCTRL_EMI (0x000000f0)
@@ -379,24 +273,12 @@
#define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000
#define BM_CLKCTRL_EMI_BUSY_REF_CPU 0x08000000
#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE 0x04000000
-#define BP_CLKCTRL_EMI_RSRVD3 18
-#define BM_CLKCTRL_EMI_RSRVD3 0x03FC0000
-#define BF_CLKCTRL_EMI_RSRVD3(v) \
- (((v) << 18) & BM_CLKCTRL_EMI_RSRVD3)
#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000
#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000
-#define BP_CLKCTRL_EMI_RSRVD2 12
-#define BM_CLKCTRL_EMI_RSRVD2 0x0000F000
-#define BF_CLKCTRL_EMI_RSRVD2(v) \
- (((v) << 12) & BM_CLKCTRL_EMI_RSRVD2)
#define BP_CLKCTRL_EMI_DIV_XTAL 8
#define BM_CLKCTRL_EMI_DIV_XTAL 0x00000F00
#define BF_CLKCTRL_EMI_DIV_XTAL(v) \
(((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL)
-#define BP_CLKCTRL_EMI_RSRVD1 6
-#define BM_CLKCTRL_EMI_RSRVD1 0x000000C0
-#define BF_CLKCTRL_EMI_RSRVD1(v) \
- (((v) << 6) & BM_CLKCTRL_EMI_RSRVD1)
#define BP_CLKCTRL_EMI_DIV_EMI 0
#define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F
#define BF_CLKCTRL_EMI_DIV_EMI(v) \
@@ -406,12 +288,7 @@
#define BP_CLKCTRL_SAIF0_CLKGATE 31
#define BM_CLKCTRL_SAIF0_CLKGATE 0x80000000
-#define BM_CLKCTRL_SAIF0_RSRVD2 0x40000000
#define BM_CLKCTRL_SAIF0_BUSY 0x20000000
-#define BP_CLKCTRL_SAIF0_RSRVD1 17
-#define BM_CLKCTRL_SAIF0_RSRVD1 0x1FFE0000
-#define BF_CLKCTRL_SAIF0_RSRVD1(v) \
- (((v) << 17) & BM_CLKCTRL_SAIF0_RSRVD1)
#define BM_CLKCTRL_SAIF0_DIV_FRAC_EN 0x00010000
#define BP_CLKCTRL_SAIF0_DIV 0
#define BM_CLKCTRL_SAIF0_DIV 0x0000FFFF
@@ -422,12 +299,7 @@
#define BP_CLKCTRL_SAIF1_CLKGATE 31
#define BM_CLKCTRL_SAIF1_CLKGATE 0x80000000
-#define BM_CLKCTRL_SAIF1_RSRVD2 0x40000000
#define BM_CLKCTRL_SAIF1_BUSY 0x20000000
-#define BP_CLKCTRL_SAIF1_RSRVD1 17
-#define BM_CLKCTRL_SAIF1_RSRVD1 0x1FFE0000
-#define BF_CLKCTRL_SAIF1_RSRVD1(v) \
- (((v) << 17) & BM_CLKCTRL_SAIF1_RSRVD1)
#define BM_CLKCTRL_SAIF1_DIV_FRAC_EN 0x00010000
#define BP_CLKCTRL_SAIF1_DIV 0
#define BM_CLKCTRL_SAIF1_DIV 0x0000FFFF
@@ -438,12 +310,7 @@
#define BP_CLKCTRL_DIS_LCDIF_CLKGATE 31
#define BM_CLKCTRL_DIS_LCDIF_CLKGATE 0x80000000
-#define BM_CLKCTRL_DIS_LCDIF_RSRVD2 0x40000000
#define BM_CLKCTRL_DIS_LCDIF_BUSY 0x20000000
-#define BP_CLKCTRL_DIS_LCDIF_RSRVD1 14
-#define BM_CLKCTRL_DIS_LCDIF_RSRVD1 0x1FFFC000
-#define BF_CLKCTRL_DIS_LCDIF_RSRVD1(v) \
- (((v) << 14) & BM_CLKCTRL_DIS_LCDIF_RSRVD1)
#define BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN 0x00002000
#define BP_CLKCTRL_DIS_LCDIF_DIV 0
#define BM_CLKCTRL_DIS_LCDIF_DIV 0x00001FFF
@@ -453,12 +320,7 @@
#define HW_CLKCTRL_ETM (0x00000130)
#define BM_CLKCTRL_ETM_CLKGATE 0x80000000
-#define BM_CLKCTRL_ETM_RSRVD2 0x40000000
#define BM_CLKCTRL_ETM_BUSY 0x20000000
-#define BP_CLKCTRL_ETM_RSRVD1 8
-#define BM_CLKCTRL_ETM_RSRVD1 0x1FFFFF00
-#define BF_CLKCTRL_ETM_RSRVD1(v) \
- (((v) << 8) & BM_CLKCTRL_ETM_RSRVD1)
#define BM_CLKCTRL_ETM_DIV_FRAC_EN 0x00000080
#define BP_CLKCTRL_ETM_DIV 0
#define BM_CLKCTRL_ETM_DIV 0x0000007F
@@ -471,7 +333,6 @@
#define BP_CLKCTRL_ENET_DISABLE 30
#define BM_CLKCTRL_ENET_DISABLE 0x40000000
#define BM_CLKCTRL_ENET_STATUS 0x20000000
-#define BM_CLKCTRL_ENET_RSRVD1 0x10000000
#define BM_CLKCTRL_ENET_BUSY_TIME 0x08000000
#define BP_CLKCTRL_ENET_DIV_TIME 21
#define BM_CLKCTRL_ENET_DIV_TIME 0x07E00000
@@ -493,37 +354,23 @@
#define BM_CLKCTRL_ENET_CLK_OUT_EN 0x00040000
#define BM_CLKCTRL_ENET_RESET_BY_SW_CHIP 0x00020000
#define BM_CLKCTRL_ENET_RESET_BY_SW 0x00010000
-#define BP_CLKCTRL_ENET_RSRVD0 0
-#define BM_CLKCTRL_ENET_RSRVD0 0x0000FFFF
-#define BF_CLKCTRL_ENET_RSRVD0(v) \
- (((v) << 0) & BM_CLKCTRL_ENET_RSRVD0)
#define HW_CLKCTRL_HSADC (0x00000150)
-#define BM_CLKCTRL_HSADC_RSRVD2 0x80000000
#define BM_CLKCTRL_HSADC_RESETB 0x40000000
#define BP_CLKCTRL_HSADC_FREQDIV 28
#define BM_CLKCTRL_HSADC_FREQDIV 0x30000000
#define BF_CLKCTRL_HSADC_FREQDIV(v) \
(((v) << 28) & BM_CLKCTRL_HSADC_FREQDIV)
-#define BP_CLKCTRL_HSADC_RSRVD1 0
-#define BM_CLKCTRL_HSADC_RSRVD1 0x0FFFFFFF
-#define BF_CLKCTRL_HSADC_RSRVD1(v) \
- (((v) << 0) & BM_CLKCTRL_HSADC_RSRVD1)
#define HW_CLKCTRL_FLEXCAN (0x00000160)
-#define BM_CLKCTRL_FLEXCAN_RSRVD2 0x80000000
#define BP_CLKCTRL_FLEXCAN_STOP_CAN0 30
#define BM_CLKCTRL_FLEXCAN_STOP_CAN0 0x40000000
#define BM_CLKCTRL_FLEXCAN_CAN0_STATUS 0x20000000
#define BP_CLKCTRL_FLEXCAN_STOP_CAN1 28
#define BM_CLKCTRL_FLEXCAN_STOP_CAN1 0x10000000
#define BM_CLKCTRL_FLEXCAN_CAN1_STATUS 0x08000000
-#define BP_CLKCTRL_FLEXCAN_RSRVD1 0
-#define BM_CLKCTRL_FLEXCAN_RSRVD1 0x07FFFFFF
-#define BF_CLKCTRL_FLEXCAN_RSRVD1(v) \
- (((v) << 0) & BM_CLKCTRL_FLEXCAN_RSRVD1)
#define HW_CLKCTRL_FRAC0 (0x000001b0)
#define HW_CLKCTRL_FRAC0_SET (0x000001b4)
@@ -564,10 +411,6 @@
#define HW_CLKCTRL_FRAC1_CLR (0x000001c8)
#define HW_CLKCTRL_FRAC1_TOG (0x000001cc)
-#define BP_CLKCTRL_FRAC1_RSRVD2 24
-#define BM_CLKCTRL_FRAC1_RSRVD2 0xFF000000
-#define BF_CLKCTRL_FRAC1_RSRVD2(v) \
- (((v) << 24) & BM_CLKCTRL_FRAC1_RSRVD2)
#define BP_CLKCTRL_FRAC1_CLKGATEGPMI 23
#define BM_CLKCTRL_FRAC1_CLKGATEGPMI 0x00800000
#define BM_CLKCTRL_FRAC1_GPMI_STABLE 0x00400000
@@ -595,22 +438,10 @@
#define HW_CLKCTRL_CLKSEQ_CLR (0x000001d8)
#define HW_CLKCTRL_CLKSEQ_TOG (0x000001dc)
-#define BP_CLKCTRL_CLKSEQ_RSRVD0 19
-#define BM_CLKCTRL_CLKSEQ_RSRVD0 0xFFF80000
-#define BF_CLKCTRL_CLKSEQ_RSRVD0(v) \
- (((v) << 19) & BM_CLKCTRL_CLKSEQ_RSRVD0)
#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU 0x00040000
-#define BP_CLKCTRL_CLKSEQ_RSRVD1 15
-#define BM_CLKCTRL_CLKSEQ_RSRVD1 0x00038000
-#define BF_CLKCTRL_CLKSEQ_RSRVD1(v) \
- (((v) << 15) & BM_CLKCTRL_CLKSEQ_RSRVD1)
#define BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF 0x00004000
#define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__BYPASS 0x1
#define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__PFD 0x0
-#define BP_CLKCTRL_CLKSEQ_RSRVD2 9
-#define BM_CLKCTRL_CLKSEQ_RSRVD2 0x00003E00
-#define BF_CLKCTRL_CLKSEQ_RSRVD2(v) \
- (((v) << 9) & BM_CLKCTRL_CLKSEQ_RSRVD2)
#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM 0x00000100
#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI 0x00000080
#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP3 0x00000040
@@ -623,10 +454,6 @@
#define HW_CLKCTRL_RESET (0x000001e0)
-#define BP_CLKCTRL_RESET_RSRVD 6
-#define BM_CLKCTRL_RESET_RSRVD 0xFFFFFFC0
-#define BF_CLKCTRL_RESET_RSRVD(v) \
- (((v) << 6) & BM_CLKCTRL_RESET_RSRVD)
#define BM_CLKCTRL_RESET_WDOG_POR_DISABLE 0x00000020
#define BM_CLKCTRL_RESET_EXTERNAL_RESET_ENABLE 0x00000010
#define BM_CLKCTRL_RESET_THERMAL_RESET_ENABLE 0x00000008
@@ -640,10 +467,6 @@
#define BM_CLKCTRL_STATUS_CPU_LIMIT 0xC0000000
#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \
(((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT)
-#define BP_CLKCTRL_STATUS_RSRVD 0
-#define BM_CLKCTRL_STATUS_RSRVD 0x3FFFFFFF
-#define BF_CLKCTRL_STATUS_RSRVD(v) \
- (((v) << 0) & BM_CLKCTRL_STATUS_RSRVD)
#define HW_CLKCTRL_VERSION (0x00000200)
--
1.7.2.3
^ permalink raw reply related [flat|nested] 10+ messages in thread* some i.MX23/28 patches
2011-01-27 11:40 some i.MX23/28 patches Sascha Hauer
` (3 preceding siblings ...)
2011-01-27 11:40 ` [PATCH 4/4] ARM i.MX28: " Sascha Hauer
@ 2011-01-27 13:15 ` Sergei Shtylyov
2011-01-27 13:23 ` Sascha Hauer
2011-01-27 17:13 ` Wolfram Sang
2011-01-27 23:15 ` Shawn Guo
6 siblings, 1 reply; 10+ messages in thread
From: Sergei Shtylyov @ 2011-01-27 13:15 UTC (permalink / raw)
To: linux-arm-kernel
Hello.
On 27-01-2011 14:40, Sascha Hauer wrote:
> The following contains some i.MX23/28 cleanup patches.
> Sascha
> The following changes since commit 376e9c5848abef8c72c09bd89f2f7ee128caa104:
> ARM: mxs: add initial pm support (2011-01-26 08:30:49 +0100)
> are available in the git repository at:
> none ..BRANCH.NOT.VERIFIED..
Forgot to push?
> Sascha Hauer (4):
> ARM i.MX23/28: deobfuscate gpio initialization
> ARM i.MX23/28: do not use complicated macros if not necessary
> ARM i.MX23: remove reserved register defines
> ARM i.MX28: remove reserved register defines
>
> arch/arm/mach-mxs/gpio.c | 45 +++++----
> arch/arm/mach-mxs/regs-clkctrl-mx23.h | 124 -----------------------
> arch/arm/mach-mxs/regs-clkctrl-mx28.h | 177 ---------------------------------
> 3 files changed, 24 insertions(+), 322 deletions(-)
WBR, Sergei
^ permalink raw reply [flat|nested] 10+ messages in thread* some i.MX23/28 patches
2011-01-27 13:15 ` some i.MX23/28 patches Sergei Shtylyov
@ 2011-01-27 13:23 ` Sascha Hauer
0 siblings, 0 replies; 10+ messages in thread
From: Sascha Hauer @ 2011-01-27 13:23 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jan 27, 2011 at 04:15:13PM +0300, Sergei Shtylyov wrote:
> Hello.
>
> On 27-01-2011 14:40, Sascha Hauer wrote:
>
> >The following contains some i.MX23/28 cleanup patches.
>
> >Sascha
>
> >The following changes since commit 376e9c5848abef8c72c09bd89f2f7ee128caa104:
>
> > ARM: mxs: add initial pm support (2011-01-26 08:30:49 +0100)
>
> >are available in the git repository at:
> > none ..BRANCH.NOT.VERIFIED..
>
> Forgot to push?
No, I didn't really wanted to push. git-request-pull is just handy to
create an overall diffstat.
Sascha
>
> >Sascha Hauer (4):
> > ARM i.MX23/28: deobfuscate gpio initialization
> > ARM i.MX23/28: do not use complicated macros if not necessary
> > ARM i.MX23: remove reserved register defines
> > ARM i.MX28: remove reserved register defines
> >
> > arch/arm/mach-mxs/gpio.c | 45 +++++----
> > arch/arm/mach-mxs/regs-clkctrl-mx23.h | 124 -----------------------
> > arch/arm/mach-mxs/regs-clkctrl-mx28.h | 177 ---------------------------------
> > 3 files changed, 24 insertions(+), 322 deletions(-)
>
> WBR, Sergei
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 10+ messages in thread
* some i.MX23/28 patches
2011-01-27 11:40 some i.MX23/28 patches Sascha Hauer
` (4 preceding siblings ...)
2011-01-27 13:15 ` some i.MX23/28 patches Sergei Shtylyov
@ 2011-01-27 17:13 ` Wolfram Sang
2011-01-27 23:15 ` Shawn Guo
6 siblings, 0 replies; 10+ messages in thread
From: Wolfram Sang @ 2011-01-27 17:13 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jan 27, 2011 at 12:40:09PM +0100, Sascha Hauer wrote:
> The following contains some i.MX23/28 cleanup patches.
All
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20110127/eb333fa7/attachment.sig>
^ permalink raw reply [flat|nested] 10+ messages in thread* some i.MX23/28 patches
2011-01-27 11:40 some i.MX23/28 patches Sascha Hauer
` (5 preceding siblings ...)
2011-01-27 17:13 ` Wolfram Sang
@ 2011-01-27 23:15 ` Shawn Guo
2011-01-27 15:19 ` Sascha Hauer
6 siblings, 1 reply; 10+ messages in thread
From: Shawn Guo @ 2011-01-27 23:15 UTC (permalink / raw)
To: linux-arm-kernel
Hi Sascha,
On Thu, Jan 27, 2011 at 12:40:09PM +0100, Sascha Hauer wrote:
> The following contains some i.MX23/28 cleanup patches.
>
> Sascha
>
> The following changes since commit 376e9c5848abef8c72c09bd89f2f7ee128caa104:
>
> ARM: mxs: add initial pm support (2011-01-26 08:30:49 +0100)
>
> are available in the git repository at:
> none ..BRANCH.NOT.VERIFIED..
>
> Sascha Hauer (4):
> ARM i.MX23/28: deobfuscate gpio initialization
> ARM i.MX23/28: do not use complicated macros if not necessary
> ARM i.MX23: remove reserved register defines
> ARM i.MX28: remove reserved register defines
>
> arch/arm/mach-mxs/gpio.c | 45 +++++----
> arch/arm/mach-mxs/regs-clkctrl-mx23.h | 124 -----------------------
> arch/arm/mach-mxs/regs-clkctrl-mx28.h | 177 ---------------------------------
> 3 files changed, 24 insertions(+), 322 deletions(-)
>
All acked-by: Shawn Guo <shawn.guo@freescale.com>
I do not understand word "deobfuscate". Can you help me?
Regards,
Shawn
^ permalink raw reply [flat|nested] 10+ messages in thread* some i.MX23/28 patches
2011-01-27 23:15 ` Shawn Guo
@ 2011-01-27 15:19 ` Sascha Hauer
0 siblings, 0 replies; 10+ messages in thread
From: Sascha Hauer @ 2011-01-27 15:19 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jan 28, 2011 at 07:15:58AM +0800, Shawn Guo wrote:
> Hi Sascha,
>
> On Thu, Jan 27, 2011 at 12:40:09PM +0100, Sascha Hauer wrote:
> > The following contains some i.MX23/28 cleanup patches.
> >
> > Sascha
> >
> > The following changes since commit 376e9c5848abef8c72c09bd89f2f7ee128caa104:
> >
> > ARM: mxs: add initial pm support (2011-01-26 08:30:49 +0100)
> >
> > are available in the git repository at:
> > none ..BRANCH.NOT.VERIFIED..
> >
> > Sascha Hauer (4):
> > ARM i.MX23/28: deobfuscate gpio initialization
> > ARM i.MX23/28: do not use complicated macros if not necessary
> > ARM i.MX23: remove reserved register defines
> > ARM i.MX28: remove reserved register defines
> >
> > arch/arm/mach-mxs/gpio.c | 45 +++++----
> > arch/arm/mach-mxs/regs-clkctrl-mx23.h | 124 -----------------------
> > arch/arm/mach-mxs/regs-clkctrl-mx28.h | 177 ---------------------------------
> > 3 files changed, 24 insertions(+), 322 deletions(-)
> >
> All acked-by: Shawn Guo <shawn.guo@freescale.com>
>
> I do not understand word "deobfuscate". Can you help me?
I guess that's not a correct word. Try searching for obfuscate instead.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 10+ messages in thread