[PATCH 00/22] zd1211rw: add support for AP-mode

From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
To: linux-wireless@vger.kernel.org
Cc: Daniel Drake <dsd@gentoo.org>,
	"John W. Linville" <linville@tuxdriver.com>,
	Ulrich Kunitz <kune@deine-taler.de>
Subject: [PATCH 00/22] zd1211rw: add support for AP-mode
Date: Mon, 31 Jan 2011 20:46:58 +0200	[thread overview]
Message-ID: <20110131184657.10044.98610.stgit@fate.lan> (raw)

This patchset adds AP-mode support to zd1211rw. Tested with zd1211b devices only.

Patches are mix of fixes and AP support adding code.
   [1-2]  fix oopses noticed while testing
     [3]  add missing locking
     [4]  fix beacon setup to match vendor driver (needed for AP mode)
   [5-6]  'may sleep' cleanups, move code from workers to mac80211-functions
  [7-11]  AP-mode supporting code
 [12-16]  beacon setup fixes/workarounds                                                          
 [17-20]  device reset and device/TX/RX stall workarounds
    [21]  enable AP mode
    [22]  add more debuging output

---

Christian Lamparter (1):
      mac80211: fix race between next beacon dtim and ieee80211_get_buffered_bc

Jussi Kivilinna (21):
      zd1211rw: use urb anchors for tx and fix tx-queue disabling
      zd1211rw: cancel process_intr work on zd_chip_disable_int()
      zd1211rw: add locking for mac->process_intr
      zd1211rw: fix beacon interval setup
      zd1211rw: move set_multicast_hash and set_rx_filter from workers to configure_filter
      zd1211rw: move set_rts_cts_work to bss_info_changed
      zd1211rw: support setting BSSID for AP mode
      zd1211rw: fix ack_pending in filter_ack causing tx-packet ordering problem on monitor
      zd1211rw: let zd_set_beacon_interval() set dtim_period and add AP-beacon flag
      zd1211rw: implement beacon fetching and handling ieee80211_get_buffered_bc()
      zd1211rw: add beacon watchdog and setting HW beacon more failsafe
      zd1211rw: batch beacon config commands together
      [v2] zd1211rw: use stack and preallocated memory for small cmd-buffers
      zd1211rw: change interrupt URB buffer to DMA buffer
      zd1211rw: lower hw command timeouts
      zd1211rw: collect driver settings and add function to restore theim
      zd1211rw: add TX watchdog and device resetting
      zd1211rw: reset device when CR_BCN_FIFO_SEMAPHORE freezes in beacon setup
      zd1211rw: reset rx urbs after idle period of 30 seconds
      zd1211rw: enable NL80211_IFTYPE_AP
      zd1211rw: add useful debug output

 drivers/net/wireless/zd1211rw/zd_chip.c |  134 ++++++---
 drivers/net/wireless/zd1211rw/zd_chip.h |    5 
 drivers/net/wireless/zd1211rw/zd_mac.c  |  448 ++++++++++++++++++++++++-------
 drivers/net/wireless/zd1211rw/zd_mac.h  |   24 +-
 drivers/net/wireless/zd1211rw/zd_usb.c  |  445 ++++++++++++++++++++++++-------
 drivers/net/wireless/zd1211rw/zd_usb.h  |   30 ++
 net/mac80211/ieee80211_i.h              |    1 
 net/mac80211/tx.c                       |    4 
 8 files changed, 822 insertions(+), 269 deletions(-)