All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
To: linux-wireless@vger.kernel.org
Cc: Daniel Drake <dsd@gentoo.org>,
	"John W. Linville" <linville@tuxdriver.com>,
	Ulrich Kunitz <kune@deine-taler.de>
Subject: [PATCH 14/22] [v2] zd1211rw: use stack and preallocated memory for small cmd-buffers
Date: Mon, 31 Jan 2011 20:49:14 +0200	[thread overview]
Message-ID: <20110131184914.10044.19685.stgit@fate.lan> (raw)
In-Reply-To: <20110131184657.10044.98610.stgit@fate.lan>

Use stack for allocing small < 64 byte arrays in zd_chip.c and preallocated
buffer in zd_usb.c. This might lower CPU usage for beacon setup.

v2:
 - Do not use stack buffers in zd_usb.c as they would be used for urb
   transfer_buffer.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
---
 drivers/net/wireless/zd1211rw/zd_chip.c |   43 +++++++++----------------------
 drivers/net/wireless/zd1211rw/zd_usb.c  |   42 ++++++++++++++++++++----------
 drivers/net/wireless/zd1211rw/zd_usb.h  |    1 +
 3 files changed, 42 insertions(+), 44 deletions(-)

diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index d8dc927..907e656 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -108,25 +108,17 @@ int zd_ioread32v_locked(struct zd_chip *chip, u32 *values, const zd_addr_t *addr
 {
 	int r;
 	int i;
-	zd_addr_t *a16;
-	u16 *v16;
+	zd_addr_t a16[USB_MAX_IOREAD32_COUNT * 2];
+	u16 v16[USB_MAX_IOREAD32_COUNT * 2];
 	unsigned int count16;
 
 	if (count > USB_MAX_IOREAD32_COUNT)
 		return -EINVAL;
 
-	/* Allocate a single memory block for values and addresses. */
-	count16 = 2*count;
-	/* zd_addr_t is __nocast, so the kmalloc needs an explicit cast */
-	a16 = (zd_addr_t *) kmalloc(count16 * (sizeof(zd_addr_t) + sizeof(u16)),
-		                   GFP_KERNEL);
-	if (!a16) {
-		dev_dbg_f(zd_chip_dev(chip),
-			  "error ENOMEM in allocation of a16\n");
-		r = -ENOMEM;
-		goto out;
-	}
-	v16 = (u16 *)(a16 + count16);
+	/* Use stack for values and addresses. */
+	count16 = 2 * count;
+	BUG_ON(count16 * sizeof(zd_addr_t) > sizeof(a16));
+	BUG_ON(count16 * sizeof(u16) > sizeof(v16));
 
 	for (i = 0; i < count; i++) {
 		int j = 2*i;
@@ -139,7 +131,7 @@ int zd_ioread32v_locked(struct zd_chip *chip, u32 *values, const zd_addr_t *addr
 	if (r) {
 		dev_dbg_f(zd_chip_dev(chip),
 			  "error: zd_ioread16v_locked. Error number %d\n", r);
-		goto out;
+		return r;
 	}
 
 	for (i = 0; i < count; i++) {
@@ -147,18 +139,18 @@ int zd_ioread32v_locked(struct zd_chip *chip, u32 *values, const zd_addr_t *addr
 		values[i] = (v16[j] << 16) | v16[j+1];
 	}
 
-out:
-	kfree((void *)a16);
-	return r;
+	return 0;
 }
 
 int _zd_iowrite32v_locked(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs,
 	           unsigned int count)
 {
 	int i, j, r;
-	struct zd_ioreq16 *ioreqs16;
+	struct zd_ioreq16 ioreqs16[USB_MAX_IOWRITE32_COUNT * 2];
 	unsigned int count16;
 
+	/* Use stack for values and addresses. */
+
 	ZD_ASSERT(mutex_is_locked(&chip->mutex));
 
 	if (count == 0)
@@ -166,15 +158,8 @@ int _zd_iowrite32v_locked(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs,
 	if (count > USB_MAX_IOWRITE32_COUNT)
 		return -EINVAL;
 
-	/* Allocate a single memory block for values and addresses. */
-	count16 = 2*count;
-	ioreqs16 = kmalloc(count16 * sizeof(struct zd_ioreq16), GFP_KERNEL);
-	if (!ioreqs16) {
-		r = -ENOMEM;
-		dev_dbg_f(zd_chip_dev(chip),
-			  "error %d in ioreqs16 allocation\n", r);
-		goto out;
-	}
+	count16 = 2 * count;
+	BUG_ON(count16 * sizeof(struct zd_ioreq16) > sizeof(ioreqs16));
 
 	for (i = 0; i < count; i++) {
 		j = 2*i;
@@ -192,8 +177,6 @@ int _zd_iowrite32v_locked(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs,
 			  "error %d in zd_usb_write16v\n", r);
 	}
 #endif /* DEBUG */
-out:
-	kfree(ioreqs16);
 	return r;
 }
 
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 9493ab8..6b604fc 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -1361,15 +1361,20 @@ int zd_usb_ioread16v(struct zd_usb *usb, u16 *values,
 		return -EWOULDBLOCK;
 	}
 	if (!usb_int_enabled(usb)) {
-		 dev_dbg_f(zd_usb_dev(usb),
+		dev_dbg_f(zd_usb_dev(usb),
 			  "error: usb interrupt not enabled\n");
 		return -EWOULDBLOCK;
 	}
 
+	ZD_ASSERT(mutex_is_locked(&zd_usb_to_chip(usb)->mutex));
+	BUILD_BUG_ON(sizeof(struct usb_req_read_regs) + USB_MAX_IOREAD16_COUNT *
+		     sizeof(__le16) > sizeof(usb->req_buf));
+	BUG_ON(sizeof(struct usb_req_read_regs) + count * sizeof(__le16) >
+	       sizeof(usb->req_buf));
+
 	req_len = sizeof(struct usb_req_read_regs) + count * sizeof(__le16);
-	req = kmalloc(req_len, GFP_KERNEL);
-	if (!req)
-		return -ENOMEM;
+	req = (void *)usb->req_buf;
+
 	req->id = cpu_to_le16(USB_REQ_READ_REGS);
 	for (i = 0; i < count; i++)
 		req->addr[i] = cpu_to_le16((u16)addresses[i]);
@@ -1402,7 +1407,6 @@ int zd_usb_ioread16v(struct zd_usb *usb, u16 *values,
 
 	r = get_results(usb, values, req, count);
 error:
-	kfree(req);
 	return r;
 }
 
@@ -1428,11 +1432,17 @@ int zd_usb_iowrite16v(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs,
 		return -EWOULDBLOCK;
 	}
 
+	ZD_ASSERT(mutex_is_locked(&zd_usb_to_chip(usb)->mutex));
+	BUILD_BUG_ON(sizeof(struct usb_req_write_regs) +
+		     USB_MAX_IOWRITE16_COUNT * sizeof(struct reg_data) >
+		     sizeof(usb->req_buf));
+	BUG_ON(sizeof(struct usb_req_write_regs) +
+	       count * sizeof(struct reg_data) >
+	       sizeof(usb->req_buf));
+
 	req_len = sizeof(struct usb_req_write_regs) +
 		  count * sizeof(struct reg_data);
-	req = kmalloc(req_len, GFP_KERNEL);
-	if (!req)
-		return -ENOMEM;
+	req = (void *)usb->req_buf;
 
 	req->id = cpu_to_le16(USB_REQ_WRITE_REGS);
 	for (i = 0; i < count; i++) {
@@ -1460,7 +1470,6 @@ int zd_usb_iowrite16v(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs,
 
 	/* FALL-THROUGH with r == 0 */
 error:
-	kfree(req);
 	return r;
 }
 
@@ -1505,14 +1514,19 @@ int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits)
 	if (r) {
 		dev_dbg_f(zd_usb_dev(usb),
 			"error %d: Couldn't read CR203\n", r);
-		goto out;
+		return r;
 	}
 	bit_value_template &= ~(RF_IF_LE|RF_CLK|RF_DATA);
 
+	ZD_ASSERT(mutex_is_locked(&zd_usb_to_chip(usb)->mutex));
+	BUILD_BUG_ON(sizeof(struct usb_req_rfwrite) +
+		     USB_MAX_RFWRITE_BIT_COUNT * sizeof(__le16) >
+		     sizeof(usb->req_buf));
+	BUG_ON(sizeof(struct usb_req_rfwrite) + bits * sizeof(__le16) >
+	       sizeof(usb->req_buf));
+
 	req_len = sizeof(struct usb_req_rfwrite) + bits * sizeof(__le16);
-	req = kmalloc(req_len, GFP_KERNEL);
-	if (!req)
-		return -ENOMEM;
+	req = (void *)usb->req_buf;
 
 	req->id = cpu_to_le16(USB_REQ_WRITE_RF);
 	/* 1: 3683a, but not used in ZYDAS driver */
@@ -1544,6 +1558,6 @@ int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits)
 
 	/* FALL-THROUGH with r == 0 */
 out:
-	kfree(req);
 	return r;
 }
+
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.h b/drivers/net/wireless/zd1211rw/zd_usb.h
index 233ce82..2ed48ae 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.h
+++ b/drivers/net/wireless/zd1211rw/zd_usb.h
@@ -207,6 +207,7 @@ struct zd_usb {
 	struct zd_usb_rx rx;
 	struct zd_usb_tx tx;
 	struct usb_interface *intf;
+	u8 req_buf[64]; /* zd_usb_iowrite16v needs 62 bytes */
 	u8 is_zd1211b:1, initialized:1;
 };
 


  parent reply	other threads:[~2011-01-31 18:49 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-01-31 18:46 [PATCH 00/22] zd1211rw: add support for AP-mode Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 01/22] zd1211rw: use urb anchors for tx and fix tx-queue disabling Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 02/22] zd1211rw: cancel process_intr work on zd_chip_disable_int() Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 03/22] zd1211rw: add locking for mac->process_intr Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 04/22] zd1211rw: fix beacon interval setup Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 05/22] zd1211rw: move set_multicast_hash and set_rx_filter from workers to configure_filter Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 06/22] zd1211rw: move set_rts_cts_work to bss_info_changed Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 07/22] zd1211rw: support setting BSSID for AP mode Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 08/22] zd1211rw: fix ack_pending in filter_ack causing tx-packet ordering problem on monitor Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 09/22] zd1211rw: let zd_set_beacon_interval() set dtim_period and add AP-beacon flag Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 10/22] zd1211rw: implement beacon fetching and handling ieee80211_get_buffered_bc() Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 11/22] mac80211: fix race between next beacon dtim and ieee80211_get_buffered_bc Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 12/22] zd1211rw: add beacon watchdog and setting HW beacon more failsafe Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 13/22] zd1211rw: batch beacon config commands together Jussi Kivilinna
2011-01-31 18:49 ` Jussi Kivilinna [this message]
2011-01-31 18:49 ` [PATCH 15/22] zd1211rw: change interrupt URB buffer to DMA buffer Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 16/22] zd1211rw: lower hw command timeouts Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 17/22] zd1211rw: collect driver settings and add function to restore theim Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 18/22] zd1211rw: add TX watchdog and device resetting Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 19/22] zd1211rw: reset device when CR_BCN_FIFO_SEMAPHORE freezes in beacon setup Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 20/22] zd1211rw: reset rx urbs after idle period of 30 seconds Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 21/22] zd1211rw: enable NL80211_IFTYPE_AP Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 22/22] zd1211rw: add useful debug output Jussi Kivilinna
2011-02-04 14:06 ` [PATCH 00/22] zd1211rw: add support for AP-mode Jussi Kivilinna
2011-02-04 21:25   ` John W. Linville

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110131184914.10044.19685.stgit@fate.lan \
    --to=jussi.kivilinna@mbnet.fi \
    --cc=dsd@gentoo.org \
    --cc=kune@deine-taler.de \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.